-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and offers constructive criticisms relative to variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Consult with Main Lab chemist on products more than 10% out of product specifications Upon approval of product record data onto Quality Control car and enter information into computer data base Consult QC manual for specific requirements for product analysis of production batches and customers special requirements Calibrate QC equipment as required Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude. Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2024-11-12 14:45:15
-
JOB DESCRIPTION
As a Maintenance Mechanic you will keep machines, mechanical equipment, or the structure of the facility in repair by Pipe fitting; boiler making; insulating; welding; machining; carpentry; repairing electrical or mechanical equipment; installing, aligning, and balancing new equipment; and repairing buildings, floors, or stairs. Solving challenges is the very foundation of who we are.
After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint.
When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution.
Today, that discovery is Rust-Oleum Corporation. The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today.
When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry.
Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry.
Here's what you can expect every day: Repair and maintain machinery and equipment including pumps, motors, filling and packaging equipment, conveyors, palletizers, piping, valves, tanks, agitators, drives, gearboxes, and utilities. Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices. Perform inspections and preventive maintenance to ensure compliance with safety and regulatory requirements as well as to ensure equipment reliability. Work with filling line operators to efficiently change over line equipment for different label, container, and packaging sizes. Improve OEE (Overall Equipment Effectiveness) on the filling lines by Pareto analysis of OEE data and implementation of Lean Manufacturing tools to reduce downtime. Maintain all operating equipment in satisfactory condition.
Schedule needed repairs to have minimum interference with operations.
Troubleshoot/repair equipment in a timely and efficient manner. Comply with company safety rules and procedures.
Complete daily and shift clean up tasks. Communicate results/ concerns/ issues with supervisor and co-workers.
Ensure shift to shift hand-off is complete. Support and complete small capital projects. Required Experience:
3+ years of maintenance experience in manufacturing environment; preferably in chemical/paint manufacturing High School Diploma or equivalent Must have expertise in packaging equipment, plumbing, and pipefitting, with skills in electrical work and instrument calibration considered a definite plus Demonstrated ability to diagnose and troubleshoot complex packaging and material-handling equipment is required Ability to do basic math. Accurately enter and retrieve computer data. Ability to operate machinery Ability to solve problems in a team environment. Active participation in our Continuous Improvement Process. Ability to consistently lift 50 pounds. Willing to work overtime as required
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Huntington, West Virginia
Posted: 2024-11-12 14:45:15
-
JOB DESCRIPTION
Employer Description:
Legend Brands, an industry leader and long standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration. Please apply directly on our careers page - https://hcwx.fa.us2.oraclecloud.com/hcmUI/CandidateExperience/en/sites/CX_2
Job Description:
Legend Brands is seeking Assembly Operators for our swing shift, 3:30 pm- 2:00 am, Monday-Thursday at our Burlington, WA location.
Some overtime may be required.
Shift differential of $2.00/hour for all hours worked on the swing shift.
Job Requirements:
Fabricate and assemble components into finished industrial products including testing, inspection, and packaging for final delivery. Perform all duties such as mechanical assembly, electrical wiring, testing, inspection, and kitting and packaging in an efficient, safe, and quality conscious manner according to specifications, procedures, schedules, and safety standards.
Qualifications:
Mechanical aptitude, manual dexterity, and basic experience with power tools High School diploma or equivalent required Manufacturing experience preferred
Hiring Range:
Between $18.00 - $18.00/hour
Benefits:
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, 10 paid holidays per year, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations:
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's All job offers are contingent upon satisfactory pre-employment drug test and background screening Accepting applications through November 30, 2024.
Applications will be reviewed as received and on-going interviews will be conducted as necessary
ABOUT US
Legend Brands group is the leading provider of equipment, chemicals and expert training for professional cleaning, facility maintenance, portable environmental control, smoke and fire remediation and water damage restoration.Apply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2024-11-12 14:45:13
-
JOB DESCRIPTION
GENERAL SUMMARY
Assist with operating filling line and box completed product.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Maintain supplies for filling line, such as empty cans, boxes, etc. Assist operator in changing filing line components from run to run Check application of lids on containers and manually tighten any loose lids Print and apply labeling to filled boxes Box and palletize finished product Complete tracking forms and attach to pallets Move completed pallets to shipping staging areas
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
No experience necessary Fill off experience preferred
Specific Knowledge, Skills, and Abilities Required
Basic math/ measurement skills Basic reading and comprehension skills Reasoning Ability
Determine correct processes regarding standard filling line procedures as instructed in initial training and from batch ticket instructions. Work without continuous supervision and complete assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the essential functions of this job the employee is regularly required to stand, bend and/or stoop, grasp, handle or feel.
The employee is occasionally required to walk, talk and/or hear.
The employee must regularly lift and/or move up to 50 pounds.
Employees must also be able to read and comprehend written instructions and remember processes and procedures for safe and accurate completion of duties for the entirety of the shift.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
KEY PERFORMANCE INDICATORS (KPI)
Number of units produced daily Accuracy of units produced Appearance of work area Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2024-11-12 14:45:13
-
JOB DESCRIPTION
Job Summary:
KIRKER, a leading nail polish manufacturer, is seeking an experienced and dedicated Customer Service manager to lead and manage the department.
The ideal candidate will ensure that all customer service processes are followed meticulously in line with quality expectations and will play a crucial role to keep an outstanding level of customer satisfaction.
This position requires strong leadership skills, a deep understanding of customer service best practices, and the ability to drive continuous improvement in processes and customer support to increase their level of satisfaction.
Key Responsibilities:
Develop and maintain strong relationships with key customers, ensuring their needs are met and expectations exceeded. Implement customer service initiatives that enhance the customer experience and drive customer loyalty. Ensure accurate and timely communication with customers regarding order status, product availability, and any potential delays. Ensure that all SOPs are strictly followed, maintaining high standards of service, quality and customer satisfaction in line with ISO/FDA/GMP requirements Collaborate with multiple departments to ensure perfect order management: on time and in a qualitative manners.
Handle escalated customer service issues, providing solutions, ensuring a positive customer experience and constant improvements. Monitor and analyze customer service metrics, preparing regular reports for senior management. Work with cross functional teams to ensure customer feedback is incorporated into products and operations. Manage Customer Service Department staff.
Qualifications:
Bachelor's degree in Business Administration, or a related field. Proven experience in a customer service management role, preferably within the manufacturing or beauty industry. Strong knowledge of ISO certification and SOP implementation. Excellent leadership, communication, and interpersonal skills. Ability to manage multiple tasks and priorities in a fast-paced environment. Proficiency with excel, Power BI and D365 Strong problem-solving skills and a proactive approach to customer service. Ability to work collaboratively with cross-functional teams.
ABOUT US
Kirker is a custom manufacturer of nail lacquer and nail care treatment products since the 1940's that has evolved into a full turnkey operation.
We are proud to offer our services in filling and packaging from free standing stock to beautifully designed packaging options and displays.
With manufacturing operations in the United States and Europe, we offer the right option to fit each customer's individual requirements.
Kirker offers a full range of services from product development, R&D, production, and quality control, to filling and pack off.
Our cutting-edge expertise, custom formulations, and first-class service have affirmed our leadership position within the industry.Apply for this ad Online! ....Read more...
Type: Permanent Location: Paterson, New Jersey
Posted: 2024-11-12 14:45:13
-
JOB DESCRIPTION
Job Title:
Quality Engineer
Location: Vernon Hills, IL
Department: Rust-Oleum US Corporate Quality
Reports To: Manager, Corporate Quality
Direct Reports/Manages others: No
Hybrid Schedule: Our hybrid work environment includes two (2) remote days/week.
Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry.
We offer a wide range of products including decorative fashion paints, durable industrial roof repair coatings and, of course, our famous rust-fighting formula that started it all.
JOB PURPOSE:
The Quality Engineer is responsible for providing technical support for the corporate quality team.
The role will work with our internal quality teams to work on continuous improvement activities as well as supporting new product activities.
They will take leadership of our Product Complaint Review (PCR) process, where they will analyze consumer complaint data and identify opportunities for improvement in our products that will drive improved customer and consumer satisfaction.
This individual will work closely with our corporate and plant quality teams, as well as manufacturing and R&D.
RESPONSIBILITIES:
Work with plant and corporate quality teams on management of quality projects and new product launches. Risk assessments on new product launches.
Design and implementation of new quality processes Statistical assessments of process capabilities and identification of opportunities for improvement. Analyze product complaint data, identify opportunities for improvement and work across cross-functional teams to drive improvements.
Will include In depth analysis of customer complaint data in excel, identification of poorly performing products from the data analysis and engaging the brand and R&D teams to identify possible product improvements. Support day-to-day management of quality incidents, processes, etc.
through data analysis and utilization of root cause analysis.
QUALIFICATIONS:
0-3+ years of experience (in a manufacturing setting) or equivalent process industry or consumer products manufacturing experience. Bachelor's degree in engineering (Chemical and/or Mechanical preferred) or Chemistry Proficient in MS office, Statistical analysis (Minitab, etc).
SAP experience desirable.
Nice to have: Experience in lean, six sigma or other continuous improvement methodologies Possible travel up to 30%
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and one floating holiday per year.
You are also eligible to earn three weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Vernon Hills, Illinois
Posted: 2024-11-12 14:45:05
-
JOB DESCRIPTION
Essential Duties
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
Reasonable accommodation may be made to enable qualified individuals with a disability to perform the essential duties.
The below list is intended to be illustrative of the responsibilities of this position and is not all encompassing. Research and analyze design proposals, specifications, and other data. Design and layout mechanical/electrical systems using SolidWorks EPDM. Support hardware, firmware, software and app development. Develop Bills of Materials for new circuit board designs. Evaluate existing designs for cost reduction, component updates, etc. Create technical drawings, schematics, etc.
Support development and manufacturing of electrical systems. Ability to use software analysis tools and calculation programs. Create test plans for component/product validation testing relating to performance, product safety, reliability, and durability. Help coordinate manufacturing launch of new/revised products including wiring work instructions, production test equipment training/work instructions, and other support documentation. Support the development of electrical test equipment for PCBAs and subassemblies. Develop test requirements for internal and external suppliers of electrical components. Establish process control parameters and help to define Standard Work to optimize efficiency and First Pass Yield (FPY). Provide shop floor support, interfacing with other functional groups as required, to resolve processing issues with sound, lasting, corrective actions. Create Engineering Change Orders (ECOs) and Temporary Deviation Authorizations (TDAs) to support changes to new or existing components, products, and processes.
Education Requirements and Minimum Qualifications
BS Manufacturing Engineering Technology (BSMfgT) or BS Manufacturing Engineering (BSMfgE) with an Electrical Engineering background with 3+ years relevant experience. Advanced mathematical experience. Valid driver's license required. The requirements listed below are representative of the knowledge, skill, and/or ability required. Knowledge of electrical components, sensors, motors, switches, and controls. Knowledge of PCB design best practices Knowledge of solid modeling Computer Aided Design (CAD), specifically SolidWorks. Ability to work as a team member and/or individually towards overall company objectives. Ability to program firmware for system controls, User Interface, and wireless communication. Ability to travel up to 10% of the time.
Experience with product safety listing standards from various listing agencies UL, ETL, CSA, IEC.
Desired Qualifications
Knowledge of engineering Finite Element Analysis (FEA) software preferred. Design of Experiments knowledge and experience preferred. Understanding of electronic manufacturing processes preferred. Strong team player with leadership skills and the ability to drive change and manage multiple priorities.
Driven and self-motivated. Analytical, accurate, and detail oriented.
Hiring Range:
Between $86K - $99K/annually
Benefits:
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, leaves of absence, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations:
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability. Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's. All job offers are contingent upon satisfactory pre-employment drug test and background screening. Accepting application through November 30, 2024.
Applications will be reviewed as received and ongoing interviews will be conducted as necessary. Apply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2024-11-12 14:45:04
-
JOB DESCRIPTION
GENERAL SUMMARY
Fill completed batches into appropriate containers or onto tanker for shipping purposes, following appropriate procedures for different fill-off methods as indicated on batch ticket.
Seal and apply appropriate labeling to containers as indicated on batch tickets.
Move finished goods to finished goods warehouse for shipping.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate appropriate vat to be filled off per batch ticket instructions Pre-mix material in vat before filling Locate appropriate materials (containers, strainers, equipment, etc.) used for filling, as indicated by batch ticket, and in fill-off manuals Always bond and ground containers before filling Obtain retain per instructions in fill-off procedures.
Labels retain as directed by QC department Complete fill-off procedure Clean vat and equipment using appropriate cleaning solution indicated on batch ticket Make proper notations on batch ticket regarding fill-off Apply appropriate labeling as instructed on batch ticket Move finished goods to warehouse if necessary Maintain neat and orderly work area
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
Basic reading and comprehension skills Basic math skills
Specific Knowledge, Skills, and Abilities Required
Basic machine operation capabilities
Reasoning Ability:
Ability to determine correctness of filling procedures in relation to specified guidelines learned during initial training and during any ongoing training.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions. While performing the essential functions of this job the employee is required to stand and use hands to grasp, handle or feel for entire shift.
The employee is required to walk, bend, stoop, and talk or hear.
Employee must regularly lift and/or move up to 50 pounds and lift and/or move up to 100 pounds with appropriate equipment. Employees must also be able to read and comprehend written instructions and remember processes and procedures for safe and accurate completion of duties for the entirety of the shift.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protective equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Number of batches filled Accuracy of filling Attendance Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2024-11-12 14:45:01
-
JOB DESCRIPTION
Mantrose Group is a world leader in specialty coatings and functional blends for the food and pharmaceutical industries.
Founded more than 100 years ago, Mantrose is a unit of RPM International Inc., a specialty coatings company traded on the NYSE under the symbol RPM.SUMMARY:Ensures inbound/outbound approvals per standard operating procedures and specifications.
Oversees all finished good labels and amendments as needed.
Assists QA team with all disposition correspondence, COA's, data entry, testing, swabbing, and other tasks as needed.DUTIES & RESPONSIBILITIES: • Approve receiving paperwork on all inbound shipments and release in ERP system.• Create Certificate of Analysis (COA) for all finished goods with micro data from 3rd party lab results• Release all finished goods in ERP system as COA is created, then saved.• Maintain all label templates in bartender & create new templates as needed.• Label approval checks against finished good specification.• Process all HOLD dispositions & email vendors/contract customers.• Tally monthly reports (swabs, disposition, issues log, environmental data)• Assist with monthly environmental swabs & daily equipment swabs as needed.• Assist lab with in-house testing and data entry.• Assist with lab supply orders.• Other lab duties as needed.REQUIRED KNOWLEDGE, SKILLS & ABILITIES: • Knowledge of Microsoft (Word, Excel, Outlook) • Knowledge of lab equipment a plus • Bilingual in Spanish recommended, not required.• Detail orientated, organized, and ability to multitask in a fast-paced environment.• Work proactively with all departments.• Time management skill set preferred.EDUCATION & EXPERIENCE: • Graduation from high school or GED equivalent • Previous work experience in Food Manufacturing Industry recommended, not required.PHYSICAL REQUIREMENTS & WORKING CONDITIONS: Ability to stand & sit for prolonged periods of time, walking, climbing, carrying, bending, kneeling, reaching, handling, pushing, and pulling.
Ability to lift up to 50lbs.Travel Required:n/aBenefits:Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to medical, dental, vision, Employer paid life insurance, STD/LTD, vacation/sick days/parental leave, 401(k), employee stock purchase plan, and pension.Mantrose Haeuser co., Inc./Profile Food Ingredients is an Equal Opportunity Employer and is willing to provide reasonable accommodation to qualified individuals with disabilities, unless doing so would cause undue hardship.
Rate: $19 Hour plus, Depending on Experience.Apply for this ad Online! ....Read more...
Type: Permanent Location: Elgin, Illinois
Posted: 2024-11-12 14:45:01
-
JOB DESCRIPTION
GENERAL SUMMARY
Assist with operating filling line and box completed product.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Maintain supplies for filling line, such as empty cans, boxes, etc. Assist operator in changing filing line components from run to run Check application of lids on containers and manually tighten any loose lids Print and apply labeling to filled boxes Box and palletize finished product Complete tracking forms and attach to pallets Move completed pallets to shipping staging areas
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
No experience necessary Fill off experience preferred
Specific Knowledge, Skills, and Abilities Required
Basic math/ measurement skills Basic reading and comprehension skills Reasoning Ability
Determine correct processes regarding standard filling line procedures as instructed in initial training and from batch ticket instructions. Work without continuous supervision and complete assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the essential functions of this job the employee is regularly required to stand, bend and/or stoop, grasp, handle or feel.
The employee is occasionally required to walk, talk and/or hear.
The employee must regularly lift and/or move up to 50 pounds.
Employees must also be able to read and comprehend written instructions and remember processes and procedures for safe and accurate completion of duties for the entirety of the shift.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
KEY PERFORMANCE INDICATORS (KPI)
Number of units produced daily Accuracy of units produced Appearance of work area Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2024-11-12 14:44:58
-
JOB DESCRIPTION
GENERAL SUMMARY
Fill completed batches into appropriate containers or onto tanker for shipping purposes, following appropriate procedures for different fill-off methods as indicated on batch ticket.
Seal and apply appropriate labeling to containers as indicated on batch tickets.
Move finished goods to finished goods warehouse for shipping.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate appropriate vat to be filled off per batch ticket instructions Pre-mix material in vat before filling Locate appropriate materials (containers, strainers, equipment, etc.) used for filling, as indicated by batch ticket, and in fill-off manuals Always bond and ground containers before filling Obtain retain per instructions in fill-off procedures.
Labels retain as directed by QC department Complete fill-off procedure Clean vat and equipment using appropriate cleaning solution indicated on batch ticket Make proper notations on batch ticket regarding fill-off Apply appropriate labeling as instructed on batch ticket Move finished goods to warehouse if necessary Maintain neat and orderly work area
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
Basic reading and comprehension skills Basic math skills
Specific Knowledge, Skills, and Abilities Required
Basic machine operation capabilities
Reasoning Ability:
Ability to determine correctness of filling procedures in relation to specified guidelines learned during initial training and during any ongoing training.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions. While performing the essential functions of this job the employee is required to stand and use hands to grasp, handle or feel for entire shift.
The employee is required to walk, bend, stoop, and talk or hear.
Employee must regularly lift and/or move up to 75 pounds and lift and/or move up to 600 pounds with appropriate equipment. Employees must also be able to read and comprehend written instructions and remember processes and procedures for safe and accurate completion of duties for the entirety of the shift.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protective equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Number of batches filled Accuracy of filling Satisfactory appearance of work area Attendance Apply for this ad Online! ....Read more...
Type: Permanent Location: Westfield, Massachusetts
Posted: 2024-11-12 14:44:58
-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and offers constructive criticisms relative to variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Consult with Main Lab chemist on products more than 10% out of product specifications Upon approval of product record data onto Quality Control car and enter information into computer data base Consult QC manual for specific requirements for product analysis of production batches and customers special requirements Calibrate QC equipment as required Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude. Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2024-11-12 14:44:58
-
JOB DESCRIPTION
GENERAL SUMMARY
Operate and maintain pen labeling machine.
Maintain production pace in accordance with scheduling requirements and production line output.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned. Set machine with proper labels per batch ticket instructions Run machine to apply labels to fill sticks Complete batch ticket with required labeling information Perform very basic mechanical adjustments and repairs as needed Maintain neat and orderly work area
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
No prior experience necessary
Specific Knowledge, Skills, and Abilities Required
Basic math/measurement skills Basic reading and comprehension skills Great attention to detail and following written and verbal instructions
Reasoning Ability
Determine correct process regarding standard fill stick labeling procedures as instructed in initial training and on batch ticket Work without continuous supervision while completing assigned projects
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment, and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 75 pounds with provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description
KEY PERFORMANCE INDICATORS (KPI)
Number of labeled pens produced daily Accuracy of pen labeling Appearance of work area Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2024-11-12 14:44:57
-
JOB DESCRIPTION
Review processing schedules or production orders to make decisions concerning inventory requirements, staffing requirements, work procedures, or duty assignments, considering budgetary limitations and time constraints. Direct or coordinate production, processing, distribution, or marketing activities of industrial organizations. Develop or implement production tracking or quality control systems, analyzing production, quality control, maintenance, or other operational reports, to detect production problems. Assist in the hiring, training, evaluating, or discharging of staff or resolving personnel grievances. Prepare and maintain production reports or personnel records. Set and monitor product standards, examining samples of raw products or directing testing during processing, to ensure finished products are of prescribed quality. Initiate or coordinate inventory or cost control programs. Coordinate or recommend procedures for facility or equipment maintenance or modification, including the replacement of machines.
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 1/2 paid holidays and two floating holidays per year.
You are also eligible to earn three weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Brooklyn Park, Minnesota
Posted: 2024-11-12 14:44:57
-
JOB DESCRIPTION
Job Title
: Senior Packaging Engineer
Location: Vernon Hills, IL
Department: Packaging Engineering
Reports To: Director, Packaging Engineering
Direct Reports/Manages others: No
Hybrid Schedule: Our hybrid work environment includes two (2) remote days/week.
Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry.
We offer a wide range of products including decorative fashion paints, durable industrial roof repair coatings and, of course, our famous rust-fighting formula that started it all.
JOB PURPOSE:
The Senior Packaging Engineer is responsible for project management of packaging initiatives on cross-functional teams that support Brand Marketing new product development and continuous quality and cost improvement projects.
This position reports to the Director Packaging Engineering and will support the team function in driving the development and implementation of new or improved packaging processes, quality assurance and cost controls of packaging design and materials.
RESPONSIBILITIES:
Develop new packaging designs and specifications through collaboration with cross functional project teams to meet internal and external customer requirements. Develop ideas for packaging innovation, quality improvements, cost savings, and sustainability that are relevant to the business. Participate as an active member of cross-functional business teams comprised of individuals from a variety of disciplines, including Product Management, Manufacturing, R&D, Quality, Sourcing, and Purchasing. Design, coordinate, and complete performance and compatibility testing in support of packaging component changes at both internal manufacturing and external contract manufacturing sites Works in conjunction with and is a resource for Sourcing Managers, Purchasing, Manufacturing Plants, Quality and Distribution Centers to ensure successful testing protocols and plant trials on packaging materials. Collaborates with packaging material vendors to develop, establish and implement production packaging material specifications. Maintain awareness of technical trends and developments in the packaging industry. Understand and ensure packaging meets UN, DOT and regulatory requirements.
REQUIREMENTS:
Bachelors in Packaging Engineering or related field Minimum of 5 years of packaging development and project management experience preferably within CPG industry working with cross-functional teams Experience with packaging materials capabilities and equipment along with physical and structure package testing procedures Good verbal and written communication skills required.
Must have the ability effectively communicate with cross-functional business partners. Ability to progress multiple projects concurrently. SAP preferred but not required.
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and generous PTO.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holiday per year.
You are also eligible to earn three weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Vernon Hills, Illinois
Posted: 2024-11-12 14:44:57
-
JOB DESCRIPTION
GENERAL SUMMARY
Directly manage daily service requirements for assigned account(s)/territory.
Assure proper and effective coverage of all assigned account(s).
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Effectively manage daily service requirements for assigned account(s)s and territory where applicable to minimize sales and/or management support requirements.
Support overall achievement of planned sales and profitability objectives for the assigned account(s), territory, and overall business.
Directly responsible for all service activities within assigned territory/account(s) including:
On-site product testing and refinement
Customer personnel training and development as directed.
Product and process issue resolution
Process documentation in a timely manner and as directed.
Process auditing
Other assigned service requirements as directed/assigned.
Maintain effective, regular, and competent communication with the company's laboratory through:
Complete and thorough Lab Work Requests
Documentation of trial results on all new products
Key activity reports
Line surveys
Provide appropriate and regular reporting of activities and accomplishments to assigned Regional Sales Manager and others as directed to including but not limited to:
Monthly report and key trip or activity reports
Updates on competitive activities in the marketplace or at key customers/accounts
Provide professional representation for the company at trade shows and with industry organizations and attend company functions as directed.
Position requires personal's primary residence to be within assigned territory.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skills, and/or abilities required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required/Preferred
High school graduate or equivalent required
4-year degree preferred
Minimum 5 years related finishing experience or laboratory formulation experience.
Professional training in related business and/or professional seminars
Specific Knowledge, Skills, and Abilities Required
Excellent motivational facilitator skills
Excellent people and leadership skills
Excellent analytical and organizational skills
Excellent verbal and written communication skills
Excellent score on color examination
Computer skills include word processing and spread sheets.
Ability to objectively assess positive performance and address performance issues.
Self-motivated, proactive, aggressive, and self-assured work ethics
Provide leadership (leading by example with confident decision-making ability)
Ability to think creatively to define and address personal, group or business needs and opportunities.
Ability to travel as required.
Reasoning Ability
Comprehend technology uses and applications.
Demonstrate outstanding problem solving and critical thinking skills.
CERTIFICATES, LICENSES, REGISTRATIONS
Valid driver's license
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential function of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions.
While performing the essential functions of this job the employee is regularly required to walk, stand, bend, and/or stoop, grasp, handle or feel, talk and/or hear.
The employee must regularly lift and/or move up to 50 pounds and occasionally lift and or move up to 100 pounds.
The employee is frequently required to bend, squat, and stoop.
The employee is required to sit, walk, lift, carry, push, pull, climb, and kneel in this position.
The employee must be physically able to meet demands required by frequent travel to and from customer sites.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a typical manufacturing environment with moderate solvent odors and normal hazards associated with handling, compounding and application of coatings may be present.
Most duties will be performed within assigned customer or prospective customer manufacturing facilities.
Other duties will be performed within RPM WFG or customer corporate, lab, and distribution facility sites.
Appropriate personal protective equipment is provided to always enable proper health and safety precautions.
HMIS and MSDS guidelines must be followed when working with raw materials and coatings to assure safety.
KEY PERFORMANCE INDICATORS (KPI)
Achieve 100% or better of monthly, quarterly, and annual service plans for assigned accounts/ territory.
Encourage, develop, and assist in increasing sales volume.
Maintain and expand his or her knowledge of the company's policies, products, and programs.
Exhibit initiative for advancement
Attend meetings and/or classes to advance job-related skills.
Excellent attendance recordApply for this ad Online! ....Read more...
Type: Permanent Location: Annapolis, Maryland
Posted: 2024-11-12 14:44:56
-
JOB DESCRIPTION
Determine schedules, sequences, and assignments for work activities, based on work priority, quantity of equipment and skill of personnel. Monitor employees' work levels and review work performance. Monitor tool and part inventories and the condition and maintenance of shops to ensure adequate working conditions. Investigate accidents and injuries and prepare reports of findings. Recommend or initiate personnel actions, such as hires, promotions, transfers, discharges, and disciplinary measures. Compile operational and personnel records, such as time and production records, inventory data, repair and maintenance statistics, and test results. Develop, implement, and evaluate maintenance policies and procedures. Counsel employees about work-related issues and assist employees to correct job-skill deficiencies. Examine objects, systems, or facilities, and analyze information to determine needed installations, services, or repairs. Conduct or arrange for worker training in safety, repair, and maintenance techniques, operational procedures, or equipment use. Utilize the computerized maintenance management system to deliver KPI data and evaluation maintenance efficiency. Involvement in Continuous Improvement initiatives and Root Cause Analysis is essential.
(CAPA) Research and suggest improvements based on recognized repetitive failure or substandard manufacturing practices, environment compatibility, etc. Provide support for multiple shifts, maintenance related activity or projects. Share any newly learned discoveries pertinent to repair or troubleshooting techniques that will assist team to respond more efficiently and safely. Assist in the training of Maintenance Apprentices. Communicating and conversing professionally and technically with maintenance, operations, engineering, and other resources to solving machine related issues and taking appropriate steps keeping equipment in peak operational condition. Expected to understand all equipment functions of the plant. Perform other duties as assigned by the manager and/or plant manager including project management and contractor management. Ability to work independently with resourcefulness, originality, and initiative. Understanding of functional criteria for control systems, power systems, and electronic device selection. Soft skills, interacting, positive reinforcement, teamwork, highly cooperative, attentive, leading by example,
Skills/Experience
Demonstrated leadership in the following areas: preventative maintenance, implementing continuous improvement, Lean manufacturing, safety, standard work and employee coaching & development. Experience with CMMS required. Must possess good verbal, written, and presentation communication skills, with ability to communicate at all levels within the organization. An associate degree in a technical discipline, journey worker credential or relatable on the job experience. SAP knowledge preferred. Microsoft Office experience required. Continued education will be required as needed to sustain departmental/individual technological levels and licenses
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9.5 paid holidays and 2 floating holidays per year.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Fairborn, Ohio
Posted: 2024-11-12 14:44:55
-
JOB DESCRIPTION
Job Title: NEW PRODUCT DESIGN ENGINEER
Location: Pleasant Prairie, WI
Department: Research & Development
Reports To: Chief Technology Officer of R&D
Direct Reports/Manages others: No
Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry.
We offer a wide range of products including decorative fashion paints, durable industrial roof repair coatings and, of course, our famous rust-fighting formula that started it all.
JOB PURPOSE:
New Product & Design Engineer will have the responsibility for design, development and testing of application of new product concepts for our new technology development and existing products.
You will work closely with Marketing, Product Management, Manufacturing, and R&D to ensure that the designs meet market needs, cost targets, and production requirements.
RESPONSIBILITIES:
Work independently to initiate innovative and functional product designs and manage the design projects related to new product development across all Rust-Oleum product categories. Participate in research of internal and external voice of customer meetings, analyze customer needs and insights, and translate them into value-added design solutions. Design, prototype, and test product design to ensure quality, functionality, durability, manufacturability and correlate chemical and physical material to consumer application and use, cost, safety and environmental impact. Work closely with Marketing, Product Management, Manufacturing, and R&D teams to ensure that the designs meet/exceed market/product needs, cost targets, and production requirements. Identify and select materials and components to meet design objectives. Identify, assess and select potential 3rd party design and /or manufacturing partners, and act as our project manager liaison with selected firm(s), travel to production facilities to evaluate processes and ensure compliance and quality to the standards. Develop and perform competitive assessments and analyses Act as the "thought and team leader' for the business regarding product delivery system and packaging design. Create and/or guide engineering drawings, specifications, tolerances for designs.
REQUIREMENTS:
Minimum of bachelor's degree in Material and Mechanical Engineering or other related fields. 2 or more years of hands-on experience in new product development and tooling design, prototyping, and testing of mechanical systems with proven track record of successful new product design and development, preferably in durable consumer markets Extensive knowledge of product design, materials selection and manufacturing processes and direct experience working with a broad array of materials, preferably for various wipes of tools and delivery systems for coatings, cleaners and other consumer and industrial products. Excellent working knowledge of Computer Aided Design modelling concepts and software proficient with 3D CAD software (SolidWorks) for 3D part modeling, drawing, and assembly creation of the mechanical components Experience working with tooling manufacturers both domestically and internationally. A passion for design, engineering, problem solving, with critical thinking and creativity. Ability to work effectively with a cross-functional team from project concept through commercialization. Strong project management, analytical and problem-solving skills including good special acuity for design. Excellent interpersonal, written, and verbal communication and presentation skills. Ability to travel as required.
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and one floating holiday per year.
You are also eligible to earn three weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin
Posted: 2024-11-12 14:44:51
-
JOB DESCRIPTION
GENERAL SUMMARY
Assist with operating filling line and box completed product.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Maintain supplies for filling line, such as empty cans, boxes, etc. Assist operator in changing filing line components from run to run Check application of lids on containers and manually tighten any loose lids Print and apply labeling to filled boxes Box and palletize finished product Complete tracking forms and attach to pallets Move completed pallets to shipping staging areas
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
No experience necessary Fill off experience preferred
Specific Knowledge, Skills, and Abilities Required
Basic math/ measurement skills Basic reading and comprehension skills Reasoning Ability
Determine correct processes regarding standard filling line procedures as instructed in initial training and from batch ticket instructions. Work without continuous supervision and complete assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the essential functions of this job the employee is regularly required to stand, bend and/or stoop, grasp, handle or feel.
The employee is occasionally required to walk, talk and/or hear.
The employee must regularly lift and/or move up to 50 pounds.
Employees must also be able to read and comprehend written instructions and remember processes and procedures for safe and accurate completion of duties for the entirety of the shift.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
KEY PERFORMANCE INDICATORS (KPI)
Number of units produced daily Accuracy of units produced Appearance of work area Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2024-11-12 14:44:50
-
JOB DESCRIPTION
GENERAL SUMMARY
Fill completed batches into appropriate containers or onto tanker for shipping purposes, following appropriate procedures for different fill-off methods as indicated on batch ticket.
Seal and apply appropriate labeling to containers as indicated on batch tickets.
Move finished goods to finished goods warehouse for shipping.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate appropriate vat to be filled off per batch ticket instructions Pre-mix material in vat before filling Locate appropriate materials (containers, strainers, equipment, etc.) used for filling, as indicated by batch ticket, and in fill-off manuals Always bond and ground containers before filling Obtain retain per instructions in fill-off procedures.
Labels retain as directed by QC department Complete fill-off procedure Clean vat and equipment using appropriate cleaning solution indicated on batch ticket Make proper notations on batch ticket regarding fill-off Apply appropriate labeling as instructed on batch ticket Move finished goods to warehouse if necessary Maintain neat and orderly work area
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
Basic reading and comprehension skills Basic math skills
Specific Knowledge, Skills, and Abilities Required
Basic machine operation capabilities
Reasoning Ability:
Ability to determine correctness of filling procedures in relation to specified guidelines learned during initial training and during any ongoing training.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions. While performing the essential functions of this job the employee is required to stand and use hands to grasp, handle or feel for entire shift.
The employee is required to walk, bend, stoop, and talk or hear.
Employee must regularly lift and/or move up to 50 pounds and lift and/or move up to 100 pounds with appropriate equipment. Employees must also be able to read and comprehend written instructions and remember processes and procedures for safe and accurate completion of duties for the entirety of the shift.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protective equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Number of batches filled Accuracy of filling Attendance Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2024-11-12 14:44:50
-
JOB DESCRIPTION
As our Maintenance Mechanic you are are to maintain and repair plant equipment to ensure safe and reliable operations while maximizing Overall Equipment Effectiveness (OEE).
Solving challenges is the very foundation of who we are.
After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint.
When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution.
Today, that discovery is Rust-Oleum Corporation. The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today.
When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry.
Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry. Here's what you can expect every day: Repair and maintain machinery and equipment including: pumps, motors, filling and packaging equipment, conveyors, palletizers, piping, valves, tanks, agitators, drives, gearboxes, and utilities. Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices. Perform inspections and preventive maintenance to ensure compliance with safety and regulatory requirements as well as to ensure equipment reliability. Work with filling line operators to efficiently change over line equipment for different label, container, and packaging sizes. Improve OEE (Overall Equipment Effectiveness) on the filling lines by Pareto analysis of OEE data and implementation of Lean Manufacturing tools to reduce downtime. Maintain all operating equipment in satisfactory condition.
Schedule needed repairs to have minimum interference with operations.
Troubleshoot/repair equipment in a timely and efficient manner. Comply with company safety rules and procedures.
Complete daily and shift clean up tasks. Communicate results/ concerns/ issues with supervisor and co-workers.
Ensure shift to shift hand-off is complete. Support and complete small capital projects. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.
Required Experience:
3+ years of maintenance experience in manufacturing environment; preferably in chemical/paint manufacturing High School Diploma or equivalent Must have expertise in packaging equipment, plumbing, and pipefitting, with skills in electrical work and instrument calibration considered a definite plus Demonstrated ability to diagnose and troubleshoot complex packaging and material-handling equipment is required Ability to do basic math. Accurately enter and retrieve computer data. Ability to operate machinery Ability to solve problems in a team environment. Active participation in our Continuous Improvement Process. Ability to consistently lift 50 pounds. Willing to work overtime as required Apply for this ad Online! ....Read more...
Type: Permanent Location: Attleboro, Massachusetts
Posted: 2024-11-12 14:43:55
-
JOB DESCRIPTION
As our Maintenance Supervisor you will be to maximize availability of all plant and equipment while complying with safety, legislative, environmental and certifying authority requirements by ensuring efficient preventive and corrective maintenance, supervising activities of maintenance personnel, providing recommendations for solutions to maintenance problems, verifying completed work meets applicable requirements; and recommending operating and capital budget items. Solving challenges is the very foundation of who we are.
After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint.
When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution.
Today, that discovery is Rust-Oleum Corporation. The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today.
When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry.
Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry. Here's what you can expect every day: Determine schedules, sequences, and assignments for work activities, based on work priority, quantity of equipment and skill of personnel. Monitor employees' work levels and review work performance. Monitor tool and part inventories and the condition and maintenance of shops to ensure adequate working conditions. Investigate accidents and injuries, and prepare reports of findings. Recommend or initiate personnel actions, such as hires, promotions, transfers, discharges, and disciplinary measures. Compile operational and personnel records, such as time and production records, inventory data, repair and maintenance statistics, and test results. Develop, implement, and evaluate maintenance policies and procedures. Counsel employees about work-related issues and assist employees to correct job-skill deficiencies. Examine objects, systems, or facilities, and analyze information to determine needed installations, services, or repairs. Conduct or arrange for worker training in safety, repair, and maintenance techniques, operational procedures, or equipment use. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.
Required Experience:
BS Degree in Mechanical Engineering or industrial technology preferred. Minimum 3-5 years of experience as a maintenance supervisor. Demonstrated leadership in the following areas: preventative maintenance, implementing continuous improvement, Lean manufacturing, safety, standard work and employee coaching & development. Experience with CMMS required. PSM (Process Safety Management) and or TCPA experience preferred. Must possess good verbal, written, and presentation communication skills, with ability to communicate at all levels within the organization. Experience in ISO 9001:2008 environment preferred.
Additional Consideration Given to Those With:
Exposure to quality programs Experience with SAP Paint/Coatings/chemical industry knowledge or experience Apply for this ad Online! ....Read more...
Type: Permanent Location: Huntington, West Virginia
Posted: 2024-11-12 14:43:46
-
JOB DESCRIPTION
Solving challenges is the very foundation of who we are.
After all, our founder, sea captain Robert Fergusson, didn't particularly set out to invent rust preventive paint.
He just wanted to keep his ship intact and stumbled upon a valuable solution.
Today, that discovery is Rust-Oleum Corporation. Founded in 1921, the same passion that drove the captain to create the world's first rust-preventative paint still drives us today.
When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry.
Our creative and talented team of over 2,000 people across every corner of the world help us remain the global leader in protective paints and coatings for both home and industry. Here's what you can expect every day: Plan and implement lean manufacturing strategies to achieve overarching global business strategy. Lead/coordinate lean manufacturing events/activities (i.e., kaizen/continuous improvement, value stream mapping, statistical problem solving, etc.) as required, including the planning of events and resources, training and leading teams, achieving event objectives, and documenting performance. Provide leadership in continuous improvement efforts to improve reliability, ease of use & maintenance, minimize changeover times, and to eradicate production losses. Coach & mentor operations' team, including staff, supervisors, and crew leads on continuous improvement methods & processes to establish a culture where tools and methods are utilized in a standard way to deliver improvements. Develop lean leadership within local operations' team to enable them to lead and execute their own lean activities within the plant according to the business strategy. Transition ownership of completed projects to the local operations' team, and support sustaining activities to ensure results are maintained. Maintain positive work relationships with members of other teams to communicate effectively, and to ensure compliance with cross-team responsibilities.
Responsibilities/Expectations: Ability to establish plant management processes for reporting metrics. Ability to understand plant financial measures and how they are generated. Ability to interpret control charts. Ability to motivate others to take action dictated by data. Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person. Maintain a good record of attendance and punctuality. Learn all manual tasks performed within the department. Perform tasks assigned using specific operating procedures and following department specific quality control processes and procedures. Treat people with dignity and respect. Conduct all business with integrity. Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities. Follow all safety procedures and company policies. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Attleboro, Massachusetts
Posted: 2024-11-12 14:43:45
-
JOB DESCRIPTION
As our Machine Operator, you will help Rust-Oleum deliver our product on time by operating, adjusting, and managing changeover on the line.
Whatever it takes to meet, and exceed, our daily production goals.
Every day you will troubleshoot machines and unforeseen challenges working alongside a fast-paced team you can rely on.
To thrive you must have a high school diploma or GED and experience working high-speed equipment as a Machine Operator in a filling or packaging environment. Solving challenges is the very foundation of who we are.
After all, our founder, sea captain Robert Fergusson, didn't particularly set out to invent rust preventive paint.
He just wanted to keep his ship intact and stumbled upon a valuable solution.
Today, that discovery is Rust-Oleum Corporation. Founded in 1921, the same passion that drove the Captain to create the world's first rust-preventative paint still drives us today.
When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry.
Our creative and talented team of over 2,000 people across every corner of the world help us remain the global leader in protective paints and coatings for both home and industry. As our Machine Operator, you can expect: A reliable shift and to-do list that includes multitasking between operating the equipment, supplying the lines with material, dialing into the order details, and making adjustments to troubleshoot unforeseen machine maintenance repairs.
We rely on every Machine Operator to help us surpass daily production goals. Safety to be our number one priority.
You should be able to lift 75 pounds.
You'll learn our manufacturing standards and make sure that everyone leaves as they come. Great benefits that include pension, medical, dental and vision insurance, and regular recognition for a job well done.
From big benefits to small every day rewards, we take great care of our associates. A hardworking team you can rely on.
We trust each other to show up every day and on time. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.
Required Skills:
High school graduate or equivalent. Experience with CNC Operations preferred. Ability to read and fully understand batch cards and instructions to effectively communicate directions to other associates. Ability to do basic math. Ability to read and understand various meters, scales and electronic read outs. Ability to enter computer data. Industrial experience is desirable. Good mechanical aptitude. Ability to coordinate the work of others. Ability to solve problems in a team environment. Ability to lift 75 pounds Apply for this ad Online! ....Read more...
Type: Permanent Location: Hagerstown, Maryland
Posted: 2024-11-12 14:43:44
-
JOB DESCRIPTION
As our Mechanic Operator you are responsible for both the maintenance and operation of filling and packaging equipment.
Additionally provide assistance and support to the Maintenance Mechanic in making repairs throughout the plant.
Solving challenges is the very foundation of who we are.
After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint.
When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution.
Today, that discovery is Rust-Oleum Corporation. The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today.
When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry.
Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry. Here's what you can expect every day: The primary responsibility is to operate the filling line to meet the production schedule.
Secondarily, the employee will be required to change over and repair line equipment as needed.
Restock supplies and components on filling line as needed to support production.
Perform quality checks and inspections as necessary.
Document various production data; including downtime, production rate, and issues.
Repair or replace defective equipment parts, using hand tools and power tools, and reassemble equipment Perform routine preventive maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, or the physical condition of buildings does not deteriorate. Inspecting drives, motors, and belts, checking fluid levels, replacing filters, or performing other maintenance actions, following checklists. Using tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices. Assemble, install, or repair: wiring, piping, machinery, and equipment. Clean and lubricate shafts, bearings, gears, and other parts of machinery. Diagnose mechanical problems and determining how to correct them, utilizing repair manuals and parts catalogs as necessary.
Required Experience:
High school graduate or equivalent. 1-3 years of industrial experience. Experience with filling and packaging equipment. Knowledge of machines and tools, including their designs, uses, repair, and maintenance. Ability to read and follow standard operating procedures. Ability to do basic math and enter computer data. Ability to coordinate with the work of others and solve problems in a team environment. Active participation in our Continuous Improvement Process. Ability to lift 75 pounds. Willingness to work overtime as required.
Additional Consideration Given to Those With:
Exposure to quality programs. Paint/Coatings/chemical industry knowledge or experience. Experience with a continuous process discipline such as Six Sigma/Lean/TQM manufacturing environment. Previous experience with safety programs. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin
Posted: 2024-11-12 14:43:42
