-
Your primary responsibilities will include fitting, testing, and optimising propulsion systems as we develop next-generation sustainable technologies.
Key Responsibilities:
Install instrumentation on propulsion systems, including engines, batteries, and electric motors.
Set up and rig systems to various testing platforms such as dynamometers, battery test chambers, and other specialized test rigs.
Assist engineers with commissioning and preparing the device under test (DUT) for operation.
Operate testing facilities to measure parameters, monitor DUT performance, and optimize control settings as needed.
Contribute to the development process through hardware adjustments and problem-solving.
Demonstrate strong knowledge of electronic control systems.
Maintain awareness and understanding of battery and electric motor technology.
Required Skills and Experience:
BTEC Level 3 or equivalent apprenticeship in engineering is advantageous.
GCSEs in Mathematics, English, and Science (Grades 5-9).
At least 3 years of propulsion testing experience in a similar environment.
Proficient diagnostic skills, especially with engine ECU and battery BMS systems
....Read more...
Type: Permanent Location: Aylesbury, England
Start: ASAP
Duration: Permanent
Salary / Rate: £35000 - £42000 Per Annum None
Posted: 2024-11-14 11:55:30
-
Join our client and leverage your expertise and leadership in electronics design to make a significant impact!
Holt Executive is partnered with a leading electro-optics design and manufacturing business, seeking a Senior Electronics Engineer to join their expanding Engineering team.
If you are passionate about innovation and leadership in electronics design, this role is for you.
As a Senior Electronics Engineer, you will play a key role in developing cutting-edge electronics and leading a talented team.
Your expertise will drive innovation, ensuring high standards of engineering practice and project success.
Key Responsibilities for the Senior Electronics Engineer:
- Expertise in circuit design, components, and PCB technology.
- Work in EMC, Power Management, Servo Control, processor interfacing, and communications.
- Define and review overall architecture, including power management and system wiring.
- Lead by example, setting standards for good engineering practices.
- Drive innovation within the department, regularly communicating with senior management, customers, and stakeholders.
- Lead the development or enhancement of technology, providing subject matter expertise for R&D projects.
- Technical leadership of multi-disciplined projects, fostering a systematic approach and delivering solutions to customers.
- Provide insights into resource planning and support other engineers through training and development.
Key Skills and Experience for the Senior Electronics Engineer:
- Strong degree in a related discipline accredited by the IET, with typically 6 years of relevant experience.
- Proven experience in leading or supervising projects or teams.
- Solid theoretical and practical understanding of electrical and electronic designs.
- Ability to perform analysis-based activities such as circuit emulation and power budgets.
- Capability to assess and highlight key project risks and design activities.
- Awareness of the full project lifecycle from bid development to customer support.
- Proven track record of innovation-based approaches in engineering and leading, managing, or mentoring engineers.
- Ability to investigate and fault-find technical problems at PCB or system level.
- Experience with Embedded Software Design, including ARM/KEIL.
- Knowledge of EMC to military standards and managing issues at architecture and embedded levels.
- Understanding of motors and drive technology, with skills in control systems analysis.
- Proficiency in analysis and simulation tools such as Python, MATLAB, Simulink, LT-Spice, Simetrix.
- Familiarity with management tools like JIRA, Confluence, MS Project.
- Expertise in PCB design tools such as Altium, Cadence OrCAD.
- Familiarity with design resilience techniques like Failure Mode Effects Analysis.
- Awareness of Lightning Direct and Indirect Effects.
Company Benefits:
- 37.5-hour work week with lunchtime finishes on Fridays.
- 28 days annual leave and Christmas closure.
- Employee Help@Hand Service providing access to remote GP services, second opinions, mental health support, and physiotherapy consultations.
- Life Assurance Policy, including Bereavement Counselling and Probate Helpline.
- Company Share Incentive Plan and Save as You Earn Scheme.
- Wellbeing initiatives, including access to the Aviva Wellbeing App and regular wellbeing activities.
- Employee discount scheme, including access to a wellbeing hub.
- Excellent Learning & Development opportunities.
Security Clearance Requirements:
Due to the nature of our business, our staff need to be able to obtain UK Security Clearance as a mandated requirement.
Therefore, if successful, you will need to provide proof of identity, employment history and right to work in the UK, along with proof of UK residency for at least five years.
If your skills and experience match this exciting Senior Electronics Engineer opportunity, we encourage you to apply now!
'' ....Read more...
Type: Permanent Location: West Sussex,England
Start: 14/11/2024
Salary / Rate: £50000 - £60000 per annum, Benefits: Flexible working, half-day Fridays, discount schemes & more!
Posted: 2024-11-14 10:01:12
-
CNC Programmer/Setter/Operator Location: Ely, Cambridge Salary: £17-£21ph Position Overview: We are seeking an experienced and skilled 5-Axis CNC Programmer/Setter/Operator to join our team.
This role requires expertise in CAD/CAM systems, a strong background in 5-axis programming, and flexibility to meet tight deadlines.
The ideal candidate will have excellent problem-solving skills, meticulous attention to detail, and experience working with complex drawings and castings.
Key Responsibilities:
Program, set, and operate 5-axis CNC machines for precision components in the motorsports industry.
Utilize CAD/CAM software, preferably Hypermill (training can be provided if necessary).
Interpret complex engineering drawings to create accurate programs and setups.
Design and manufacture simple fixtures as required for efficient production.
Maintain accurate work documentation, including logging times in our ERP system to support job profitability and ISO 9001 compliance.
Requirements:
Proven experience in 5-axis CNC programming and machining.
Strong proficiency in CAD/CAM software; Hypermill experience is preferred.
Ability to read and interpret complex technical drawings accurately.
Prior experience with castings is an advantage.
Flexibility to meet tight deadlines in a fast-paced environment.
Strong attention to detail and commitment to quality.
What We Offer:
Competitive salary and benefits.
4 day working week (Friday off)
Opportunities for professional development and training.
Collaborative team environment within a company recognized for quality and excellence in manufacturing.
If you have a passion for precision engineering and want to work on exciting projects, we encourage you to apply today or call Joe 02392314672 ....Read more...
Type: Permanent Location: Ely, England
Start: ASAP
Duration: Permanent
Salary / Rate: £17 - £21 per hour
Posted: 2024-11-14 09:25:38
-
Mechanical Inspector
Mechanical Inspector Salary: £30-32k
Please only apply if you have the permanent right to work in the UK.
Unfortunately, applications for the Mechanical Inspector position without this will be rejected, thank you.
Company Overview:
This company is a well-established provider of specialised drive systems, offering custom-engineered motor and gear solutions for various industries.
With decades of experience, they support a wide range of applications by delivering high-quality products tailored to unique client needs.
Their dedication to innovation and reliability has made them a trusted partner for businesses requiring precise and efficient drive systems.
It is currently seeking a motivated Mechanical Inspector to join the team
Mechanical Inspector Responsibilities:
- Conduct First Off inspections of machined components against technical drawings and specifications.
- Perform in-process inspections on the machine shop floor to ensure quality standards.
- Generate accurate measurement reports and release conforming products per customer requirements.
- Raise NCRs and collaborate with machine shop personnel to implement containment actions.
- Assist with root cause analysis for customer complaints and product defects.
- Maintain an organised log of all inspection activities and ensure inspection equipment is calibrated.
- Participate in internal and external compliance audits.
- Support the Quality team using tools such as Six Sigma, 5 Whys, Lean Manufacturing, and Continuous Improvement methodologies.
How to Apply for the Mechanical Inspector Position
Apply now or call/message Hayden at Holt Engineering on 07955 081 482 for more information on the Mechanical Inspector role. ....Read more...
Type: Permanent Location: Poole,England
Start: 13/11/2024
Salary / Rate: £30000 - £32000 per annum
Posted: 2024-11-13 13:01:04
-
11% Pension Scheme + £2,000 Bonus + Private Vitality Healthcare + 33 Holidays + Frequent Overtime
Employing around 50 people at their Huddersfield facility, this impressive organisation manufactures a range of cutting-edge, niche & value-adding products specifically for the printing industry.
Over their 50 years' in business, they have successfully installed over 7000 of their products with customers in over 40 different countries.
Because of continued growth and demand of their product range, this organisation has heavily invested in a number of new machines to increase their manufacturing capabilities, as well as measuring equipment to increase their verification capabilities.
Following this investment, we are now actively searching for an CNC Machinist on their behalf.
This company is based in Huddersfield within 15 minutes of the M1 and M62 motorways, the CNC Machinist can easily commute from Barnsley, Rotherham, Sheffield, Wakefield, Bradford, Halifax and Leeds.
The CNC Machinist will be responsible for:
Programming, setting and operating a number of machining centres to produce complex components for internal use
Reading, interpreting and working directly from engineering drawings to ensure that all products are machined in line with agreed specifications & tolerances
Optimizing machining processes/strategies and advising on process improvement
Undergoing initial and continual training & development around 5-axis machining and offline programming
The CNC Machinist will be required to work the below hours:
40 Hours per week, spread across a sociable day shift pattern
Monday to Thursday - 07:30 to 16:30
Friday - 07:30 to 14:00
In return, the CNC Machinist will receive:
Annual Salary: Up to £35,360.00 (£17.00 per hour)
Annual Bonus of £2,000.00 (£500 paid quarterly)
Holiday Entitlement: 33 Days including statutory holidays
Pension Scheme: 11% Combined (6% employer / 5% employee)
Regular overtime paid at 150%
Private healthcare (Vitality) with the option to add family members
To apply for this position, please click “APPLY NOW” and attach a copy of your CV.
Alternatively, you can contact Callum Good at E3 Recruitment. ....Read more...
Type: Permanent Location: Huddersfield, England
Start: ASAP
Salary / Rate: Up to £35360.00 per annum + 11% Pension + £2K Bonus + Overtime
Posted: 2024-11-13 10:21:39
-
Technical Engineer
Electrical Bias - Qualification Required
Industrial Machinery
Mobile Role covering national travel OL1 2RL
Salary up to £45,760 (OTE £55,000+)
Company Van And Fuel Card
Enhanced Overtime, Specialist Training, Bonus, Holiday
Are you an electrical engineer with experience in maintaining, servicing or commissioning industrial manufacturing machinery? If yes, please read on
My client is an established firm in the manufacturing sector that is currently looking for a Senior Service Engineer/ Technical Engineer to assist the current team with the breakdown and remedial work of their machines on various sites across the UK.
The ideal candidate would be within the Greater Manchester area.
Other suitable job titles could include Service Engineer, Maintenance Engineer, Repair Engineer, Remedials Engineer, Field Engineer, Multiskilled Engineer, Electrical Engineer, Technical Engineer or Installation Engineer, Commissioning Engineer or Industrial Electrician.
The Role: Technical Engineer:
To service and maintain a range of state-of-the-art spray booths.
- This is a large geographical patch and will require frequent overnight stays.
- Attending technical breakdowns on-site
- Machine retrofits and control system/ energy upgrades
- Reading wiring diagrams and designing simple electrical circuits
- Working with single and three-phase electrics
- Scheduling technical work.
- Fitting, setting up and re-programming variable speed drives or variable frequency drives (VSD/VFD)
- Some simple PLC software programming
- Mechanical repairs with fans, fan bearings and motors
- Ability to communicate well with customers
The Candidate: Technical Engineer:
- Experience servicing, commissioning, maintaining or installing industrial plant/ manufacturing machinery
- Must have experience in fault finding or installing variable speed drives VSDs
- Ability to read and work from electrical schematics and wiring diagrams
- Holds a valid Electrical Qualification: City and Guilds, NVQ Level 3 or HNC/HND equivalent
- Able to change mechanical components such as fans, fan bearings, motors and shafts
- Candidates must have a full UK driving licence and be willing to travel
- Ability to communicate well with customers
- Happy to stay overnight away from home when required
- It would be an advantage to have experience with natural gas / LPG burners
Salary and Package - Technical Engineer:
- Starting salary up to £45,760 per annum (£21-£22 per hour)
- 40-hour working week with guaranteed overtime available (OTE £55,000+)
- Door-to-Door Travel
- Private healthcare
- Company Van and Fuel Card
- Specialist equipment provided
- Continuous training/development on courses such as: Gas Safe/PASMA/ IPAF/ PLC
- 31 days holiday including bank holidays
- Loyalty bonus scheme
- Company Pension Scheme
Interested? To apply for this Technical Engineer position, here are your two options:
- "This is the job for me! When can I start?" - Call now and lets talk through your experience.
Ask for Emma Gilmore 0116 254 5411 between 7:30am - 4.30pm.
- "I think I'm right for this position, but I'm not sure I have enough to get an interview" - Click "apply now" so I can read your CV and let you know
Precision People is committed to keeping our candidates informed and offer a guaranteed response within 7 days when applying through the application system.
PPDEL ....Read more...
Type: Permanent Location: Oldham,England
Start: 13/11/2024
Salary / Rate: £44000 - £45500 per annum, Benefits: Enhanced Overtime, Specialist Training, Bonus, Holiday
Posted: 2024-11-13 08:13:03
-
Field Service Engineer
Electrical Bias - Qualification Required
Industrial Machinery Servicing
Greater Manchester OL11 1NW
Salary up to £41,500 per annum
Day Shifts Mon-Fri
Company Van And Fuel Card
Guaranteed Overtime, Gas-Safe Training Provided, Bonus
Are you an electrical engineer with experience in maintaining machinery keen to expand your skills within a niche engineering sector? If yes, read on
My client is an established firm in the specialist spray booth sector who are currently looking for a skilled individual to repair, service and maintain their spray booths on various sites within a localised patch.
Full training will be provided so machinery-specific experience is not essential.
The ideal candidate location is within Greater Manchester.
Other job titles could include Service Technician, Maintenance Engineer, Electrical Engineer, Electrical Maintenance, Multi-skilled Engineer, Electrical Technician, Service Engineer, Industrial Electrician or Maintenance Electrician.
The role of Field Service Engineer:
To service and maintain a range of state-of-the-art spray booths.
- Perform routine Maintenance
- Carry out testing including LEV (Local Exhaust Ventilation), BAT (Breathing Air Test), & ACT (Air Clearance Test)
- Electrical Servicing & Repairs
- Working with an engineers mate to assist with manual handling
- Mechanical Servicing & Repairs on drives, belts, motors, shafts, and bearings.
- Input & Extract filter replacements
- Fault finding/diagnostics
- Equipment retrofits and upgrades
- Ensuring that works are carried out in compliance with current health, safety and environmental requirements
- Flexible with overnight stays when required
Experience Required - Field Service Engineer:
- Experienced in repairing, servicing or maintaining industrial manufacturing machinery or commercial plant equipment
- Previous industries could include Automation, Food, Plant, FMCG, Industrial, Commercial Facilities or similar
- Hold a valid Electrical Qualification such as City and Guilds, NVQ Level 3 or HNC/HND
- Fault-finding experience with single or 3 phase motors
- Mechanical hands-on experience working with changing belts, shafts, bearings, motors or drives
- Lives local to Greater Manchester.
- Happy to stay away for training within the first 2 months of the role
- Good communication skills with a range of individuals; customers to site operatives
- Full clean UK Driving Licence
Salary and Package:
- Salary up to £41,600 per annum (£18-£20 per hour)
- Door to door travel / overtime (OTE £48k+)
- 40-hour working week with regular overtime available
- Company Van and Fuel Card supplied
- 31 days holiday (including statutory bank holidays)
- Saturday overtime x 1.20, (1 in 4 - planned into their diary in advance)
- Bonus per retrofit or equipment upgrade sold to the customer
- Continuous training/development - Gas Safe/PASMA/ IPAF/ Harness Awareness/ P601
- Loyalty bonus scheme & private healthcare
- Company Pension Scheme
Interested? To apply for this Field Service Engineer position, here are your two options:
- "This is the job for me! When can I start?" - Call now and lets talk through your experience.
Ask for Emma Gilmore 0116 254 5411 between 7.30am - 4.30pm.
- "I think I'm right for this position, but I'm not sure I have enough to get an interview" - Click "apply now" so I can read your CV and let you know
PPDEL ....Read more...
Type: Permanent Location: Oldham,England
Start: 13/11/2024
Salary / Rate: £39000 - £41500 per annum, Benefits: Company Van, Overtime, Gas-Safe Training, Bonus
Posted: 2024-11-13 08:11:05
-
Field Service Engineer
Electrical Bias - Qualification Required
Industrial Machinery Servicing
Sheffield S9 4WN
Salary up to £41,500 per annum
Day Shifts Mon-Fri
Company Van And Fuel Card
Guaranteed Overtime, Gas-Safe Training Provided, Bonus, Holiday, Pension
Are you an electrical engineer with experience in maintaining machinery keen to expand your skills within a niche engineering sector? If yes, read on
My client is an established firm in the specialist spray booth sector who are currently looking for a skilled individual to repair, service and maintain their spray booths on various sites within a localised patch.
Full training will be provided so machinery-specific experience is not essential.
The ideal candidate location could include: Sheffield, Rotherham, Doncaster, Worksop, Chesterfield, Mansfield, Derby.
Other job titles could include Service Technician, Maintenance Engineer, Electrical Engineer, Electrical Maintenance, Multi-skilled Engineer, Electrical Technician, Service Engineer, Industrial Electrician or Maintenance Electrician.
The role of Field Service Engineer:
To service and maintain a range of state-of-the-art spray booths.
- Perform routine Maintenance
- Carry out testing including LEV (Local Exhaust Ventilation), BAT (Breathing Air Test), & ACT (Air Clearance Test)
- Electrical Servicing & Repairs
- Working with an engineers mate to assist with manual handling
- Mechanical Servicing & Repairs on drives, belts, motors, shafts, and bearings.
- Input & Extract filter replacements
- Fault finding/diagnostics
- Equipment retrofits and upgrades
- Ensuring that works are carried out in compliance with current health, safety and environmental requirements
- Flexible with overnight stays when required
Experience Required - Field Service Engineer:
- Experienced in repairing, servicing or maintaining industrial manufacturing machinery or commercial plant equipment
- Previous industries could include Automation, Food, Plant, FMCG, Industrial, Commercial Facilities or similar
- Hold a valid Electrical Qualification such as City and Guilds, NVQ Level 3 or HNC/HND
- Fault-finding experience with single or 3 phase motors
- Mechanical hands-on experience working with changing belts, shafts, bearings, motors or drives
- Lives local to Sheffield/ surrounding areas.
- Happy to stay away for training within the first 2 months of the role
- Good communication skills with a range of individuals; customers to site operatives
- Full clean UK Driving Licence
Salary and Package:
- Salary up to £41,600 per annum (£18-£20 per hour)
- Door to door travel / overtime (OTE £48k+)
- 40-hour working week with regular overtime available
- Company Van and Fuel Card supplied
- 31 days holiday (including statutory bank holidays)
- Saturday overtime x 1.20, (1 in 4 - planned into their diary in advance)
- Bonus per retrofit or equipment upgrade sold to the customer
- Continuous training/development - Gas Safe/PASMA/ IPAF/ Harness Awareness/ P601
- Loyalty bonus scheme & private healthcare
- Company Pension Scheme
Interested? To apply for this Field Service Engineer position, here are your two options:
- "This is the job for me! When can I start?" - Call now and lets talk through your experience.
Ask for Emma Gilmore 0116 254 5411 between 8.30am - 5.30pm.
- "I think I'm right for this position, but I'm not sure I have enough to get an interview" - Click "apply now" so I can read your CV and let you know
PPDEL ....Read more...
Type: Permanent Location: Sheffield,England
Start: 13/11/2024
Salary / Rate: £38600 - £41500 per annum, Benefits: Company Van, Enhanced Overtime, Bonus, Private Health Insurance
Posted: 2024-11-13 08:11:04
-
Internal Account Manager
Strengthening our UK sales team:
We are hunting for an Internal Account Manager to support the UK sales team and enable seamless sales and account management support across UK business functions.
Delivering Garage Workshop Consumables across the Engineering Supplies, Industrial Distribution and MRO space is where our client excels.
Ideal Location - Coventry - Nuneaton - Leicester - Hinckley - Tamworth
Good Salary Neg ££ (Circa £28-32k) + Bonus + Pension
Mon - Fri working week (No weekends)
Our utopia:
Product knowledge is not essential for this role, however we seek individuals with a nose for increasing sales, developing customer spends and increasing order values through asking great questions.
1st class customer service skills are centric with a possible long term ambition to move into a field based sales role over time.
Our ideal candidate will have worked within Parts Supply, large Motor Factor or Industrial / Engineering Supplies / Distributor possessing excellent sales and business support skills however if you have great Sales skills in similar sectors you will also be considered.
10 Key skills:
Knowledge and experience of supporting a field sales based function and attentive customer service skills are vital.
Ability to take and process orders whilst building solid customer relationships.
Nose for increasing and sniffing out incremental sales to increase average order values.
Setting up and onboarding new customers to ensure a smooth and seamless customer experience.
High level of IT literacy, particularly presentations packages and analytical capabilities via Microsoft Excel.
Clear and concise communication skills written and verbally.
Professional outlook able to quickly build and develop customer relationships.
Highly organised with solid work ethic approaching tasks tenaciously.
Punctual and enthusiastic can do work ethic.
Smart in appearance, able to create excellent 1st impressions.
Online Interviews & Questions:
Online screen interviews will be conducted by our exclusive recruitment partner Glen Shepherd.
Please call Glen for an initial conversation on 07977 266309 or email with your CV detailing how your experience meets with the above.
We are hiring NOW so don't delay.
JOB REF: 4152GSA ....Read more...
Type: Permanent Location: Coleshill, England
Start: 12/12/2024
Salary / Rate: £28000 - £32000 per annum + + bonus + pension
Posted: 2024-11-12 18:00:10
-
Job Title - Multiskilled Maintenance Engineer Rate - £50,000Shift - 4 on 4 off (Days & Nights)Industry - FMCG/ManufacturingLocation: Merseyside Synergi are recruiting for a Maintenance Engineer to join one of the leading FMCG Manufacturers whose product is consumed across the world.
This is the chance to join a company who will help you develop and grow as a Maintenance Engineer.
You will be working alongside other Maintenance Engineers with a vast amount of experience. Roles & Responsibilities as a Maintenance Engineer: - Conducting Reactive and planned Maintenance on high-speed production machinery. - Responding quickly and efficiently to any unscheduled plant stoppages. - Working closely within the engineering & production team to ensure maximum efficiency.- Possess a good level of understanding to the process, products and all quality procedures.- Responsible for overseeing Planned Maintenance- Diagnosing faults- Identifying problems on machinery and implementing solutions. The Ideal background of a Maintenance Engineer: - Recognized Engineering Qualification- A recognised engineering apprenticeship, with a formal qualification.- Food Safety awareness (desirable)- Experience of industrial 3 phase motor and control systems and their interaction with modern PLC systems.- Experience of a plant with pneumatic control and operation and common industrial bearing systems Benefits:, Excellent holiday package, colleagues who work a 4 on / 4 off rota pattern also have an excellent holiday balance too to provide great work/life balance., Pension Scheme with Life Assurance, starting at 4% matched by the business up to 10% of matched contribution with Associated British Foods, our Parent Company., Sample our fantastic products at a hugely discounted price., Benefits for you and your family through our ‘Extra Slice' scheme, which provides great savings for more than 500 business/outlets including Tesco, Sainsbury, M&S, Curry's/PC World, including healthcare and saving on your holidays., Have a sandwich in our subsidised canteen, using our delicious bread or a hot meal.
Breakfast or lunch at a fraction of the price., Cycle to work scheme, Discounted rates with Simply Health for dentists, opticians, chiropractors etc., Death in service benefits up to 4 times your salary., Refer scheme - Refer a friend and if we employ them, you get the reward ££, Family friendly and flexible working schemes, Employee Assistance Programme - A free and confidential support service for employees covering a wide range of topics including financial guidance through to relationship and legal advice., Charitable giving - we have a fantastic charity partnership with Save the Children., Free on-site car parking facilities, Excellent local public transport links What you need to do nowIf you are an Electrical Maintenance Engineer and are interested in Electrical Maintenance Engineer roles, please apply through this advert.
Reference - 6925 ....Read more...
Type: Permanent Location: Liverpool, England
Salary / Rate: £47000 - £50000 per annum
Posted: 2024-11-12 18:00:06
-
Job Title - Electrical Maintenance EngineerRate - up to £51KShift - 4 on 4 off (Days & Nights) Responsibilities as a Multi-Skilled Maintenance Engineer:
Carry out Planned and reactive maintenance activities across a wide variety of automated production equipment.
Pro-active Maintenance/Continuous improvement.
Carry out improvement projects and installations on all production machinery.
Make suitable recommendations for continuous improvement.
Maintain equipment such as Conveyors, Motors, Basic Electrical equipment, Bagging Machines, Packaging Machines, PLC (basic Fault Finding).
Skills Required for a Multi-Skilled Maintenance Engineer:
FMCG experience essential
Apprenticeship / Engineering Qualification
Knowledge of FMCG/Manufacturing
What you need to do nowIf you are a Multi-Skilled Maintenance Engineer and are interested in Multi-Skilled Maintenance Engineer roles, please apply through this advert.Contact Information: Please apply below or Contact Chix on 01923 227 543 alternatively you can send your CV Multi-Skilled Maintenance Engineer, Electrical Maintenance Engineer, 18th edition, Food, Drink, Manufacturing, FMCG, Packaging, Maintenance Engineer, Barking, East London
Reference - 6593 ....Read more...
Type: Permanent Location: Barking and Dagenham, England
Salary / Rate: £48000 - £51000 per annum
Posted: 2024-11-12 18:00:04
-
Job Title - Multi skilled Maintenance Engineer Rate - Up to £36,000Shift - Monday to Friday Days onlyIndustry - FMCG/ManufacturingLocation: SomercotesSynergi are recruiting for a Multi skilled Maintenance Engineer to join one of the leading FMCG Manufacturers based in the Nottingham area whose products are used across the UK.
This is the chance to join a company who will help you develop and grow as a Multiskilled Maintenance Engineer.
You will be working alongside other Engineers with a vast amount of experience.
Roles & Responsibilities as a Multi skilled Maintenance Engineer: - Conducting Reactive and planned Maintenance on high-speed production machinery. - Responding quickly and efficiently to any unscheduled plant stoppages. - Working closely within the engineering & production team to ensure maximum efficiency.
Possess a good level of understanding to the process, products and all quality procedures.
Responsible for overseeing Planned Maintenance
Diagnosing faults
Identifying problems on machinery and implementing solutions.
The Ideal background of a Multi skilled Maintenance Engineer:
Recognized Engineering Qualification in Electrical or City & Guilds NVQ Level 3,
Heavy Industrial experience (desirable) or Food, Pharmaceutical, FMCG background
Experience of industrial 3 phase motor and control systems
Experience of a plant with pneumatic control and operation and common industrial bearing systems
What you need to do nowIf you are interested in applying for this Multi skilled Maintenance engineer role, please apply through this advert. ....Read more...
Type: Permanent Location: Nottingham, England
Salary / Rate: £34000 - £36000 per annum
Posted: 2024-11-12 18:00:03
-
Field Service Engineer Reading £34,000 - £40,000 Basic + Training + Overtime (OTE £45,000+) + Vehicle + Mobile + Pension + Benefits + Progression
Are you a field service engineer with experience in the crane, forklift, heavy plant industry or similar? If so this is a great opportunity to join a true giant!
This market leading German plant equipment manufacturer is looking for a professional field service engineer who wants to learn new skills and progress their knowledge.
Be rewarded with a decent package but benefit from personal development of your skill set, working on a truly varied equipment.
This company are specialists in the repair, maintenance, installation and manufacture of a vast range of heavy equipment and machinery used in the lifting industry worldwide.
As a growing company, they are now looking to expand their field service engineer team to help deal with demand of work.
Excellent opportunity to take a step up in your career and earn over £45,000 with consistent overtime.
Your Role As A Field Service Engineer:
* Field service engineer role - Product training given
* Heavy mechanical servicing, maintenance and breakdowns of company equipment
* Mechanical & electrical fault finding
* Regional cover - field service engineer role
* £34,000 - £40,000 Basic + Training + Overtime (OTE £45,000+)
The Successful Field Service Engineer Will Have:
* A strong mechanical background (Hydraulics, motors, gearboxes)
* Background as a maintenance / field service engineer / Plant / Cranes
* Experience with Crane machinery / heavy plant / forklifts / material handling equipment or similar
* Live around the Reading area and be happy to travel as a field service engineer
Please apply or contact Sam Eastgate for immediate consideration
Keywords: Field service engineer, service engineer, crane, mechanical, hydraulics, cranes, material handling, forklift, forklift engineer, heavy plant, dumpers, diggers, telehandlers, plant engineer, HGV, FLT, Fork Lift, REME, Army, Ex forces, Navy, RAF, Plant Equipment, Construction Equipment, Mechanic, HGV Mechanic, Reading, Slough, Thatcham.
This vacancy is being advertised by Future Engineering Recruitment Ltd.
The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.
Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.
....Read more...
Type: Permanent Location: Reading, England
Start: ASAP
Duration: PERM
Salary / Rate: £34000 - £40000 per annum + Training + Overtime (OTE £45,000+)
Posted: 2024-11-12 16:09:24
-
Internal Account Manager
Strengthening our UK sales team:
We are hunting for an Internal Account Manager to support the UK sales team and enable seamless sales and account management support across UK business functions.
Delivering Garage Workshop Consumables across the Engineering Supplies, Industrial Distribution and MRO space is where our client excels.
Ideal Location - Coventry - Nuneaton - Leicester - Hinckley - Tamworth
Good Salary Neg ££ (Circa £28-32k) + Bonus + Pension
Mon - Fri working week (No weekends)
Our utopia:
Product knowledge is not essential for this role, however we seek individuals with a nose for increasing sales, developing customer spends and increasing order values through asking great questions.
1st class customer service skills are centric with a possible long term ambition to move into a field based sales role over time.
Our ideal candidate will have worked within Parts Supply, large Motor Factor or Industrial / Engineering Supplies / Distributor possessing excellent sales and business support skills however if you have great Sales skills in similar sectors you will also be considered.
10 Key skills:
Knowledge and experience of supporting a field sales based function and attentive customer service skills are vital.
Ability to take and process orders whilst building solid customer relationships.
Nose for increasing and sniffing out incremental sales to increase average order values.
Setting up and onboarding new customers to ensure a smooth and seamless customer experience.
High level of IT literacy, particularly presentations packages and analytical capabilities via Microsoft Excel.
Clear and concise communication skills written and verbally.
Professional outlook able to quickly build and develop customer relationships.
Highly organised with solid work ethic approaching tasks tenaciously.
Punctual and enthusiastic can do work ethic.
Smart in appearance, able to create excellent 1st impressions.
Online Interviews & Questions:
Online screen interviews will be conducted by our exclusive recruitment partner Glen Shepherd.
Please call Glen for an initial conversation on 07977 266309 or email with your CV detailing how your experience meets with the above.
We are hiring NOW so don't delay.
JOB REF: 4152GSA ....Read more...
Type: Permanent Location: Nuneaton, England
Start: 12/12/2024
Salary / Rate: £28000 - £32000 per annum + + bonus + pension
Posted: 2024-11-12 16:00:21
-
Vehicle testing Applications Engineer required to join a motorsport, Autonomous Vehicle, EV, ADAS and road car testing services team who also design and manufacture GNSS based positioning and data logging sensors and instrumentation.
You will provide cutting edge innovative solutions to test full vehicles or automotive systems such as ADAS for external car and motorsports clients.
Applications Engineers are involved in the complete process from conception, specification, user acceptance testing, pre and post sales support.
Strong engineering fundamentals, project management and automotive testing experience are required.
Skills
Experience in the Automotive sector, preferably within Vehicle testing.
GNSS and INS technologies knowledge.
Exposure to Sales and customer management.
Reading and understanding technical documentation such as Regulations, specifications and product data sheets and manuals.
Understand and solve sometimes complex engineering problems
A full, clean Driver???s licence
Responsibilities
Support new and existing clients in vehicle testing.
Create product specifications and briefs based on customer needs.
Develop new ADAS test solutions exploiting driving robot solutions.
Research current and future customer applications, design and development of new hardware, Firmware and Software solutions.
Conduct technical product training,
Negotiate and agree multiple, concurrent engineering projects.
Complete user acceptance testing feeding back to development teams.
Provide expert help and guidance to the first line customer support team.
Assist marketing team with Expos, content creation, application notes, magazine articles etc
Motorsports, Automobile, Racing, Automotive Engineering, GNSS, Testing, Chassis, Vehicles, Vehicle Dynamics, Data Acquisition, ADAS, Vehicle Testing, GPS, Driving Robots, Steering Robots ....Read more...
Type: Permanent Location: Buckingham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £38000 - £45000 Per Annum None
Posted: 2024-11-12 14:56:34
-
As a Product Development Engineer, you will work on Vehicle Test System development from concept specification through hardware, firmware, software and mechanical design and development to user acceptance.
The ideal candidate will understand automotive testing against industry regulatory requirement compliance.
You will have an opinion on vehicle test procedures and be able to design a test process that captures useful data that gives more insight than just a pass or fail.
You will have exposure to brake testing, vehicle dynamics, ADAS validation or something like pass-by-noise.
This is a highly collaborative role with the Product Development Engineer internally driving solutions for customers across the complete life cycle of a product, from conception, specification, user acceptance testing and pre to post sales.
You will have a strong engineering foundations and technical understanding of automotive compliance or motorsport performance testing but also skills in project management and customer interaction.
Requirements
Experience in the Automotive sector, preferably within Vehicle testing.
Engineering background, degree or HNC level qualification
Ability to read and understanding technical regulations documentation such as specifications and product data sheets and manuals.
Interest in solving complex engineering problems.
Customer facing with strong communication skills, both oral and written.
Full, clean UK driving licence
GNSS, GPS or INS technology knowledge. ....Read more...
Type: Permanent Location: Buckingham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £38000 - £45000 Per Annum None
Posted: 2024-11-12 14:54:25
-
As a Project Manager, you will lead the development of Vehicle Test Systems from initial concept and specification through to the design and development of hardware, firmware, software, and mechanical components, culminating in user acceptance.
The ideal candidate will have a strong understanding of automotive testing and industry regulatory requirements.
You should be adept at vehicle test procedures and capable of designing processes that capture insightful data beyond mere pass/fail results.
Experience in brake testing, vehicle dynamics, ADAS validation, or pass-by-noise testing is highly desirable.
This is a highly collaborative role, involving close coordination with Product Development Engineers to deliver solutions for customers throughout the product lifecycle, from conception and specification to user acceptance testing and sales support.
A solid engineering background and technical understanding of automotive compliance or motorsport performance testing, combined with project management and customer interaction skills, are essential.
Requirements
Experience in the automotive sector, particularly in vehicle testing.
Engineering background with a degree or HNC level qualification.
Ability to read and understand technical regulations, specifications, product data sheets, and manuals.
Interest in solving complex engineering problems.
Strong communication skills, both oral and written, with customer-facing experience.
Full, clean UK driving licence.
Knowledge of GNSS, GPS, or INS technology. ....Read more...
Type: Permanent Location: Buckingham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £38000 - £45000 Per Annum None
Posted: 2024-11-12 14:53:18
-
JOB DESCRIPTION
Essential Duties
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
Reasonable accommodation may be made to enable qualified individuals with a disability to perform the essential duties.
The below list is intended to be illustrative of the responsibilities of this position and is not all encompassing. Research and analyze design proposals, specifications, and other data. Design and layout mechanical/electrical systems using SolidWorks EPDM. Support hardware, firmware, software and app development. Develop Bills of Materials for new circuit board designs. Evaluate existing designs for cost reduction, component updates, etc. Create technical drawings, schematics, etc.
Support development and manufacturing of electrical systems. Ability to use software analysis tools and calculation programs. Create test plans for component/product validation testing relating to performance, product safety, reliability, and durability. Help coordinate manufacturing launch of new/revised products including wiring work instructions, production test equipment training/work instructions, and other support documentation. Support the development of electrical test equipment for PCBAs and subassemblies. Develop test requirements for internal and external suppliers of electrical components. Establish process control parameters and help to define Standard Work to optimize efficiency and First Pass Yield (FPY). Provide shop floor support, interfacing with other functional groups as required, to resolve processing issues with sound, lasting, corrective actions. Create Engineering Change Orders (ECOs) and Temporary Deviation Authorizations (TDAs) to support changes to new or existing components, products, and processes.
Education Requirements and Minimum Qualifications
BS Manufacturing Engineering Technology (BSMfgT) or BS Manufacturing Engineering (BSMfgE) with an Electrical Engineering background with 3+ years relevant experience. Advanced mathematical experience. Valid driver's license required. The requirements listed below are representative of the knowledge, skill, and/or ability required. Knowledge of electrical components, sensors, motors, switches, and controls. Knowledge of PCB design best practices Knowledge of solid modeling Computer Aided Design (CAD), specifically SolidWorks. Ability to work as a team member and/or individually towards overall company objectives. Ability to program firmware for system controls, User Interface, and wireless communication. Ability to travel up to 10% of the time.
Experience with product safety listing standards from various listing agencies UL, ETL, CSA, IEC.
Desired Qualifications
Knowledge of engineering Finite Element Analysis (FEA) software preferred. Design of Experiments knowledge and experience preferred. Understanding of electronic manufacturing processes preferred. Strong team player with leadership skills and the ability to drive change and manage multiple priorities.
Driven and self-motivated. Analytical, accurate, and detail oriented.
Hiring Range:
Between $86K - $99K/annually
Benefits:
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, leaves of absence, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations:
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability. Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's. All job offers are contingent upon satisfactory pre-employment drug test and background screening. Accepting application through November 30, 2024.
Applications will be reviewed as received and ongoing interviews will be conducted as necessary. Apply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2024-11-12 14:45:04
-
JOB DESCRIPTION
Job Title: Roofing Specialist
Location: Field Sales (Territory - TX)
Department: Rust-Oleum US Sales
Reports To: National Account Executive
Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry.
We offer a wide range of products including decorative fashion paints, durable industrial roof repair coatings and, of course, our famous rust-fighting formula that started it all. The Roofing Specialist a field-based (with company truck and your home office) role at Rust-Oleum Corporation.
Rust-Oleum Corporation is based in Vernon Hills, IL, and is owned by RPM International.
The Roofing Specialist is a critical team member of our Professional Roofing Sales team.
This sales position is remote based and will be responsible for markets in and around Texas.
Here's what you can expect every day: Influence key decision makers in the commercial construction process including: architects, Landscape Architects, Owners, State, County and City Departments, Engineers, Builders, General Contractors, Developers and Sub Contractors Maintains an understanding of current business initiatives and identifies opportunities for improvement. Ability to develop strong customer relationships and inspire customer confidence. Manage, track and distribute significant projects to increase sales opportunities for our customer base throughout a multi-month or multi-year sales cycle. Build relationships with the current distribution customers and contractor list and identify target contractors and distributors for conversion. Ability to follow corporate and division policies and applicable governmental safety regulations are required. Experience working with internal and external customers to understand and document complex business needs and troubleshoot issues. Ability to define and document a project, set timelines, align resources, and execute to meet deadlines. Demonstrated ability to investigate and troubleshoot fluid applied roofing, waterproofing installation and product quality issues to determine root cause and appropriate resolution. Experience effectively and proactively managing customer expectations throughout the investigation/troubleshooting process. Ability to prioritize work. Ensures safe execution and delivery of all roofing services and operations. Provides a variety of technical training sessions in the contractor's office and field applications. Provide hands on application training and supervision of roof coatings and installation. Performs roof inspections and generates written reports on condition analysis, photo documentation, recommendation and material budget estimates. Communicates professionally with our customers, distributors, Rust-Oleum sales representatives, national account executives and corporate staff. Completes weekly/monthly reports, sales activities and proposals. Conducts Pre-project field inspections and technical support, including but not limited to: Adhesion tests Product recommendations Proper product installation Product diagnostic support to ensure proper selection and product usage.
Provides an on-going sales support, training and development to contractors. Function as a direct line of contact to the contractors & distributors, in the designated area, to ensure a consistent working relationship with the existing contractor base, keeping them informed and trained on Rust-Oleum's product line, new products introduced and where to buy. Develops new contractors in the area by training on product systems and their usage. Develops and grows distributor relationships to sell the Rust-Oleum Roof Coatings program. Travel within the assigned territory and complete expense reports on a timely basis.
Required Skills:
High School diploma or GED; Associate's degree (AAS), or Trade School Certification, or Bachelor's Degree (BS) preferred 5+ years experience in roofing sales or technical experience in the commercial market 2+ years experience in the field of roofing repair, troubleshooting, or field service Bilingual (Spanish/English) an added plus Working knowledge of roofing coating systems Must have a valid drivers' license and acceptable motor vehicle record Strong roofing or building science mechanical aptitude Prior experience in a field sales and service leadership role Practical computer application literacy In-depth technical understanding and extensive hands-on knowledge of applications of products.
History of working in a field that required autonomy and self-motivation Strong work ethic and ability to multi-task Overnight travel of up to 50% to support assigned customer accounts
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and one floating holiday per year.
You are also eligible to earn three weeks of vacation on an annualized basis.
*Company furnished car & cell phone
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Austin, Texas
Posted: 2024-11-12 14:42:11
-
Internal Account Manager
Strengthening our UK sales team:
We are hunting for an Internal Account Manager to support the UK sales team and enable seamless sales and account management support across UK business functions.
Delivering Garage Workshop Consumables across the Engineering Supplies, Industrial Distribution and MRO space is where our client excels.
Ideal Location - Coventry - Nuneaton - Leicester - Hinckley - Tamworth
Good Salary Neg ££ (Circa £28-32k) + Bonus + Pension
Mon - Fri working week (No weekends)
Our utopia:
Product knowledge is not essential for this role, however we seek individuals with a nose for increasing sales, developing customer spends and increasing order values through asking great questions.
1st class customer service skills are centric with a possible long term ambition to move into a field based sales role over time.
Our ideal candidate will have worked within Parts Supply, large Motor Factor or Industrial / Engineering Supplies / Distributor possessing excellent sales and business support skills however if you have great Sales skills in similar sectors you will also be considered.
10 Key skills:
Knowledge and experience of supporting a field sales based function and attentive customer service skills are vital.
Ability to take and process orders whilst building solid customer relationships.
Nose for increasing and sniffing out incremental sales to increase average order values.
Setting up and onboarding new customers to ensure a smooth and seamless customer experience.
High level of IT literacy, particularly presentations packages and analytical capabilities via Microsoft Excel.
Clear and concise communication skills written and verbally.
Professional outlook able to quickly build and develop customer relationships.
Highly organised with solid work ethic approaching tasks tenaciously.
Punctual and enthusiastic can do work ethic.
Smart in appearance, able to create excellent 1st impressions.
Online Interviews & Questions:
Online screen interviews will be conducted by our exclusive recruitment partner Glen Shepherd.
Please call Glen for an initial conversation on 07977 266309 or email with your CV detailing how your experience meets with the above.
We are hiring NOW so don't delay.
JOB REF: 4152GSA ....Read more...
Type: Permanent Location: Hinckley, England
Start: 12/12/2024
Salary / Rate: £28000 - £32000 per annum + + bonus + pension
Posted: 2024-11-12 14:00:13
-
The Company:
UK manufacturing company offering products and solutions and incorporating products from a number of leading manufacturers from around the world.
Offering long-term employment and opportunities to grow and progress within the organisation.
Options to work towards more senior positions or management.
They have an excellent reputation in the market and work alongside some of the UK’s leading manufacturers.
Benefits of the Aftermarket Sales Engineer – Mechanical Power Transmission
£40k-£55k basic salary DOE
Company Bonus
Pension
Laptop
Mobile
25 Days annual leave + bank holidays
The Role of the Aftermarket Sales Engineer – Mechanical Power Transmission
Selling aftermarket service for Mechanical Power Transmission products.
Covering the West of the UK, with a particular focus on the Northwest.
Managing existing customers within the region.
Identifying opportunities for new business.
The Ideal Person for the Aftermarket Sales Engineer – Mechanical Power Transmission
Ideally from a mechanical engineering background with HNC or upwards in mechanical engineering though an apprenticeship or long time served will also be considered.
Ability to understand engineering drawings.
Previous experience in selling aftermarket services within the engineering field.
i.e.
gearboxes, motors, power transmission, rotating equipment etc.
Able to talk about lifting forces, torque, power, speed etc...
Team player, flexible, hard worker, enjoy small team environment.
Excellent communication skills.
If you think the role of Aftermarket Sales Engineer – Mechanical Power Transmission is for you, apply now!
Consultant: Joshua Cumming
Email: joshuac@otrsales.co.uk
Tel no.
0208 397 4114
Candidates must be eligible to work and live in the UK.
About On Target
At On Target, we specialise in sales, technical and commercial jobs in the Engineering, Construction, Building Services, Medical & Scientific, and Commercial & Industrial Solutions sectors, enabling our consultants to become experts in their market sector.
We place all levels of personnel, up to Director across the UK and internationally. ....Read more...
Type: Permanent Location: Warrington, Stoke, Preston, England
Start: ASAP
Duration: Full-Time
Salary / Rate: £40000 - £55000 Per Annum Excellent Benefits
Posted: 2024-11-12 11:45:46
-
Internal Account Manager
Strengthening our UK sales team:
We are hunting for an Internal Account Manager to support the UK sales team and enable seamless sales and account management support across UK business functions.
Delivering Garage Workshop Consumables across the Engineering Supplies, Industrial Distribution and MRO space is where our client excels.
Ideal Location - Coventry - Nuneaton - Leicester - Hinckley - Tamworth
Good Salary Neg ££ (Circa £28-32k) + Bonus + Pension
Mon - Fri working week (No weekends)
Our utopia:
Product knowledge is not essential for this role, however we seek individuals with a nose for increasing sales, developing customer spends and increasing order values through asking great questions.
1st class customer service skills are centric with a possible long term ambition to move into a field based sales role over time.
Our ideal candidate will have worked within Parts Supply, large Motor Factor or Industrial / Engineering Supplies / Distributor possessing excellent sales and business support skills however if you have great Sales skills in similar sectors you will also be considered.
10 Key skills:
Knowledge and experience of supporting a field sales based function and attentive customer service skills are vital.
Ability to take and process orders whilst building solid customer relationships.
Nose for increasing and sniffing out incremental sales to increase average order values.
Setting up and onboarding new customers to ensure a smooth and seamless customer experience.
High level of IT literacy, particularly presentations packages and analytical capabilities via Microsoft Excel.
Clear and concise communication skills written and verbally.
Professional outlook able to quickly build and develop customer relationships.
Highly organised with solid work ethic approaching tasks tenaciously.
Punctual and enthusiastic can do work ethic.
Smart in appearance, able to create excellent 1st impressions.
Online Interviews & Questions:
Online screen interviews will be conducted by our exclusive recruitment partner Glen Shepherd.
Please call Glen for an initial conversation on 07977 266309 or email with your CV detailing how your experience meets with the above.
We are hiring NOW so don't delay.
JOB REF: 4152GSA ....Read more...
Type: Permanent Location: Tamworth, England
Start: 12/12/2024
Salary / Rate: £28000 - £32000 per annum + + bonus + pension
Posted: 2024-11-12 11:19:37
-
Internal Account Manager
Strengthening our UK sales team:
We are hunting for an Internal Account Manager to support the UK sales team and enable seamless sales and account management support across UK business functions.
Delivering Garage Workshop Consumables across the Engineering Supplies, Industrial Distribution and MRO space is where our client excels.
Ideal Location - Coventry - Nuneaton - Leicester - Hinckley - Tamworth
Good Salary Neg ££ (Circa £28-32k) + Bonus + Pension
Mon - Fri working week (No weekends)
Our utopia:
Product knowledge is not essential for this role, however we seek individuals with a nose for increasing sales, developing customer spends and increasing order values through asking great questions.
1st class customer service skills are centric with a possible long term ambition to move into a field based sales role over time.
Our ideal candidate will have worked within Parts Supply, large Motor Factor or Industrial / Engineering Supplies / Distributor possessing excellent sales and business support skills however if you have great Sales skills in similar sectors you will also be considered.
10 Key skills:
Knowledge and experience of supporting a field sales based function and attentive customer service skills are vital.
Ability to take and process orders whilst building solid customer relationships.
Nose for increasing and sniffing out incremental sales to increase average order values.
Setting up and onboarding new customers to ensure a smooth and seamless customer experience.
High level of IT literacy, particularly presentations packages and analytical capabilities via Microsoft Excel.
Clear and concise communication skills written and verbally.
Professional outlook able to quickly build and develop customer relationships.
Highly organised with solid work ethic approaching tasks tenaciously.
Punctual and enthusiastic can do work ethic.
Smart in appearance, able to create excellent 1st impressions.
Online Interviews & Questions:
Online screen interviews will be conducted by our exclusive recruitment partner Glen Shepherd.
Please call Glen for an initial conversation on 07977 266309 or email with your CV detailing how your experience meets with the above.
We are hiring NOW so don't delay.
JOB REF: 4152GSA ....Read more...
Type: Permanent Location: Coventry, England
Start: 12/12/2024
Salary / Rate: £28000 - £32000 per annum + + bonus + pension
Posted: 2024-11-12 11:14:57
-
Join our client and leverage your expertise and leadership in electronics design to make a significant impact!
Holt Executive is partnered with a leading electro-optics design and manufacturing business, seeking a Senior Electronics Engineer to join their expanding Engineering team.
If you are passionate about innovation and leadership in electronics design, this role is for you.
As a Senior Electronics Engineer, you will play a key role in developing cutting-edge electronics and leading a talented team.
Your expertise will drive innovation, ensuring high standards of engineering practice and project success.
Key Responsibilities for the Senior Electronics Engineer:
- Expertise in circuit design, components, and PCB technology.
- Work in EMC, Power Management, Servo Control, processor interfacing, and communications.
- Define and review overall architecture, including power management and system wiring.
- Lead by example, setting standards for good engineering practices.
- Drive innovation within the department, regularly communicating with senior management, customers, and stakeholders.
- Lead the development or enhancement of technology, providing subject matter expertise for R&D projects.
- Technical leadership of multi-disciplined projects, fostering a systematic approach and delivering solutions to customers.
- Provide insights into resource planning and support other engineers through training and development.
Key Skills and Experience for the Senior Electronics Engineer:
- Strong degree in a related discipline accredited by the IET, with typically 6 years of relevant experience.
- Proven experience in leading or supervising projects or teams.
- Solid theoretical and practical understanding of electrical and electronic designs.
- Ability to perform analysis-based activities such as circuit emulation and power budgets.
- Capability to assess and highlight key project risks and design activities.
- Awareness of the full project lifecycle from bid development to customer support.
- Proven track record of innovation-based approaches in engineering and leading, managing, or mentoring engineers.
- Ability to investigate and fault-find technical problems at PCB or system level.
- Experience with Embedded Software Design, including ARM/KEIL.
- Knowledge of EMC to military standards and managing issues at architecture and embedded levels.
- Understanding of motors and drive technology, with skills in control systems analysis.
- Proficiency in analysis and simulation tools such as Python, MATLAB, Simulink, LT-Spice, Simetrix.
- Familiarity with management tools like JIRA, Confluence, MS Project.
- Expertise in PCB design tools such as Altium, Cadence OrCAD.
- Familiarity with design resilience techniques like Failure Mode Effects Analysis.
- Awareness of Lightning Direct and Indirect Effects.
Company Benefits:
- 37.5-hour work week with lunchtime finishes on Fridays.
- 28 days annual leave and Christmas closure.
- Employee Help@Hand Service providing access to remote GP services, second opinions, mental health support, and physiotherapy consultations.
- Life Assurance Policy, including Bereavement Counselling and Probate Helpline.
- Company Share Incentive Plan and Save as You Earn Scheme.
- Wellbeing initiatives, including access to the Aviva Wellbeing App and regular wellbeing activities.
- Employee discount scheme, including access to a wellbeing hub.
- Excellent Learning & Development opportunities.
Security Clearance Requirements:
Due to the nature of our business, our staff need to be able to obtain UK Security Clearance as a mandated requirement.
Therefore, if successful, you will need to provide proof of identity, employment history and right to work in the UK, along with proof of UK residency for at least five years.
If your skills and experience match this exciting Senior Electronics Engineer opportunity, we encourage you to apply now!
....Read more...
Type: Permanent Location: West Sussex,England
Start: 11/11/2024
Salary / Rate: £45000 - £55000 per annum
Posted: 2024-11-11 11:15:07
-
.NET Developer, Azure - Formula One Racing Team - London
(Tech stack: .NET Developer, .NET 8, ASP.NET, C#, React, Angular 17, Microservices, Vue.js, TypeScript, Azure, Web API 2, Agile, SQL Server 2022, Programmer, Full Stack Engineer, Architect, .NET Developer)
Established in the 1970s our client has one of the richest heritages in motor sport.
To date they have notched up multiple FI drivers' world championship titles and constructor's world championships.
They are about to embark upon their decade of innovation programme; this will include the delivery of several enterprise level .NET / C# software development projects that will be critical to the future success of the business.
We are seeking several .NET Developer with strong experience and a skill set that encompasses: .NET, .NET Core / ASP.NET MVC and SQL Server.
Our client can provide you with industry recognised training in: .NET 8, JavaScript, React, Angular 17, Microservices, MongoDB, Vue.js, TypeScript, Azure, AWS, Web API 2, Entity Framework, Node.js, Elasticsearch, Agile, TDD, BDD, Scrum, Kanban and SQL Server 2022.
You will follow a structured career development programme with the view to being promoted within 12 months.
Our client offers extensive benefits including VIP trips to F1 races such as Monaco and Shanghai!
Location: London, UK / Remote Working
Salary: £45,000 - £55,000 + Bonus + Pension + Benefits
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
Applicants must be based in the UK and have the right to work in the UK even though remote working is available.
NOIRUKNETRECNOIRUKREC ....Read more...
Type: Permanent Location: London, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £55000 per annum + Bonus + Pension + Benefits
Posted: 2024-11-11 02:02:43
