-
Embedded Software Developer required to design, implement, and validate software for embedded devices.
Skills
Embedded Software Engineering in C and C++.
Hardware and protocol knowledge ideally of ARM chipsets and SPI, I2C, UART, CAN or USB communications.
Real time operating systems such as Keil RTX, FreeRTOS or ThreadX.
IDEs ideally Keil uVision, Freescale CodeWarrior, STM32cubeIDE or NXP MCUxpresso.
Role
Designing, developing, implementing and testing embedded software systems in C and C++ for ARM Cortex Microcontrollers.
Code for ThreadX and FreeRTOS real time operating systems.
Replicate, debug and resolve any problems. ....Read more...
Type: Permanent Location: Hemel Hempstead, England
Start: ASAP
Duration: Permanent
Salary / Rate: £55000 - £80000 Per Annum None
Posted: 2024-11-03 18:41:04
-
Firmware Developer required to help design FPGA firmware across the full design lifecycle from requirements to delivery.
You will focus on writing firmware to be deployed on FPGAs but an appreciation of electronics will aid your decision making, particularly knowledge of DSP, Radio communication, power, analogue or digital hardware.
Skills
Firmware development experience for FPGA implementation.
RF signal processing knowledge, ADC, DAC and DSP design.
Electronic design particularly RFSoC, MPSoC, Ultrascale or other Xilinx FPGAs with Vivado, Vitis or Petalinux design suites.
Laboratory equipment familiarity such as spectrum analysers, oscilloscopes, RF signal generators, network analysers etc.
2:1 or above Electronic, Communications or similar degree and ideally post grad MSc and PhD.
RTL Digital logic design and HDL programming in VHDL or Verilog.
Other technologies, Linux, Git, TCL, Embedded C programming
Role
FPGA firmware development of signal processing, glue logic, highspeed interface, testbench verification, FPGAs, SoCs and PLD.
....Read more...
Type: Permanent Location: Reading, England
Start: ASAP
Duration: Permanent
Salary / Rate: £50000 - £75000 Per Annum None
Posted: 2024-11-03 15:46:37
-
An exciting opportunity has risen for an Electronics Engineer to join this innovative and successful company, who develop a range of products for varying industries which could include consumer electronics, Aerospace, Automotive and IOT to name a few!
The successful Electronics Engineer based in Newbury, Berkshire, will work with a market leading design team whose focus is on developing the best products in the market.
The ideal Electronics Engineer, based in Newbury, Berkshire will lead the detailed design, schematic, layout, through to first article prototyping, testing and ultimately then supporting the customer as the product ramps to volume.
Also you will hold a relevant degree or HNC / HND, such as Electronic Engineering, or very significant proven technical experience in electronic product development.
You will have experience in Altium layouts and will have a good understanding of layout best practice and the state-of-the-art technology for both compact high layer count, high density miniaturised rigid / flex rigid designs and larger power-based boards.
This is a VERY exciting opportunity to joining a rapidly growing, forward thinking Electronics Innovation company who have recently moved into a state of the art facility with fully equipped labs!
APPLY NOW for the Electronics Engineer, based in Newbury, Berkshire, by sending your CV and cover letter to blongden@redlinegroup.Com or contact me on 01582 878841 / 07961 158773. ....Read more...
Type: Permanent Location: Newbury, England
Start: ASAP
Salary / Rate: £40000 - £60000 per annum
Posted: 2024-11-03 00:00:12
-
Spares & Parts Controller
Are you a Spares & Parts Controller with experience working within an Engineering business?
Company Overview: You will join the leading provider of load bank and test solutions.
With operations in North America and the UK, they have been global leaders in load bank solutions for decades, offering outstanding quality and service.
Responsibilities of this Spares & Parts Controller job based in Stamford:
Inventory Management
Monitor and manage inventory levels of spare parts to ensure optimal stock availability.
Utilize SAP BEAS and Business One applications to track and record all inventory transactions.
Conduct regular stock audits and cycle counts to maintain accurate inventory records.
Identify and address any discrepancies in stock levels promptly
Logistics and distribution management
Data Management and Reporting
Key requirements for this Spares & Parts Controller job in Stamford:
Qualification in Supply Chain Management, Logistics, Business Administration, or a related field.
Minimum of 2 years proven experience in inventory management, procurement, or logistics, preferably within an industrial or technical environment.
Proficient in Microsoft 365 programs, including Excel, Word, and Teams.
Hands-on experience with SAP BEAS and SAP Business One applications.
To apply for this Spares & Parts Controller in Lincolnshire, please email NDrain@redlinegroup.Com or call Nick on 01582878828 / 07487756328 ....Read more...
Type: Permanent Location: Stamford, England
Start: ASAP
Salary / Rate: £25000 - £35000 per annum
Posted: 2024-11-03 00:00:11
-
Automotive Engineering organisation require an Motor Vehicle Diagnostic Engineer to join a mechanical testing team that focuses on engine overhaul, vehicle testing, electrical diagnostics, electric vehicle wiring and system testing.
This role will expose you to customisable testing systems, vehicle regulation approval and certification and motorsport performance enhancement.
Skills
Automotive Engineering experience of mechanical testing.
Engine or full vehicle diagnostics electrical and mechanical instrumentation test equipment.
Dynamometer, thermocouple or transducer calibration.
Data capture, analysis and reporting
Degree or HND in Automotive or Mechanical Engineering.
Role
Full vehicle performance, safety and functional testing.
Set up and complete automated engine testing.
Identify data discrepancies early in the process, trouble shoot and re build.
Interpret and deliver conclusions from the data. ....Read more...
Type: Permanent Location: Bedford, England
Start: ASAP
Duration: Permanent
Salary / Rate: £28000 - £52000 Per Annum None
Posted: 2024-11-02 21:10:48
-
JOB DESCRIPTION
DAP is looking to hire a Product Development Scientist in R&D Department. As a R&D Scientist, you will plan/Perform experiments and generate general test data and analytical data with minimal guidance from senior R&D personnel; perform basic data analysis.
Participate in and help drive activities that improve the operation of the R&D function.
Collaborate with other R&D personnel and participate in cross-functional teams to help drive innovation.
Proven success in previous role.
Responsibilities:
Develop and carry out experimental plans for new product development, product modification and perform basic analysis of experimental results.
Demonstrate competency in formulation practices, complex problem-solving, innovative solutions, and addressing scientific challenges. Demonstrate the ability to operate analytical and material characterization equipment, generate high quality data, and perform basic analysis of the data generated. Assist senior R&D Personnel to develop manufacturing procedures for new products and work collaboratively at plant trials with plant engineers and quality control managers.
Demonstrate knowledge of basic process steps for plant trials. Adhere to Laboratory Quality Management System (QMS) practices and participate in QMS audits.
Perform laboratory equipment calibration and maintenance.
Assist in providing technical support for marketing, sales, and customer support including planning/conducting product demonstrations for customers, trade shows, Etc.
Adhere to laboratory safety practices and participate in all safety and housekeeping initiatives.
Demonstrate ability to independently assemble information for and generate highly effective written reports and oral presentations to communicate within R&D and with cross-functional teams.
Requirements:
Bachelor of Science degree in Chemistry, Polymer Science, Materials Science, or related field with 5 years' experience of relevant experience A passion for chemistry, science, problem solving, and creativity. Excellent interpersonal, written, and verbal communication and presentation skills. A breadth of technical knowledge and a keen interest in learning from others. Possess innovation skills evident as risk taking, result seeking, and idea integration.
Hands-on bench experience with various chemistries (latex, moisture curing, reactive, etc.) in sealants, adhesives, coatings, repair or related field. Bench chemistry experience and familiarity with various analytical techniques: wet chemistry, titrations, microscopy, rheology, thermal analysis, tensile testing, etc. Experience operating lab scale mixing equipment as well as lab scale analytical and testing apparatus.
Benefits:
Medical, Dental and Vision Insurance Company Provided Life Insurance Paid Time Off (PTO) Company-paid short-term and long-term disability 401(k) plans Employer-funded pension plan Tuition Reimbursement
Pay Range
65,000 to 80,000 per year.
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $7.3 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world. At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Baltimore, Maryland
Posted: 2024-11-02 14:09:36
-
JOB DESCRIPTION
Carboline is seeking a Chemistry Intern to work at our Saint Louis, MO, RD&I location.
The R&D summer internship program provides an opportunity for students to work closely with senior chemists in order to improve technical skills while being given a developmental opportunity in a chemical industrial setting.
Interns will be given the opportunity to take ownership of an assigned project by performing, analyzing, and presenting experiments targeted toward high-performance coatings, linings, and fireproofing products.
Requirements:
This paid intern will work roughly 30 - 40 hours per week from May-August.
Qualified interns should be pursuing a BS or MS degree in chemistry, biology, chemical engineering, or other closely related majors.
Strong interpersonal, communication, organizational, teamwork, and time management skills are essential
Essential Functions:
Become proficient in laboratory experiments by using laboratory instruments, and equipment and following established testing procedures Participate in all phases of research including planning, preparation, calibration, application, evaluation, data analysis, maintenance, and when necessary, appropriate disposal Design and conduct experiments with mentorship guidance within a defined project Draw sound scientific conclusions based on data analysis Present project reviews before colleagues, senior executives and business leaders Interns are expected to always operate in a safe and efficient manner Perform additional duties as assigned Commit to the Company's safety and quality programs.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace for seven years in a row, so culture and maintaining a safe and clean work environment is something we take very seriously. Carboline is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan. Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best"Apply for this ad Online! ....Read more...
Type: Permanent Location: St. Louis, Missouri
Posted: 2024-11-02 14:08:32
-
An exciting opportunity has arisen for a Senior Hardware Engineer based in Cambridge, to join a world-leader in network development for Internet of Things (“IoT”) communications.
The Senior Hardware Engineer, Cambridge, will report into the Hardware Team Leader and will require a hands-on, practical Engineer with knowledge and ideally, some experience in the following areas:
Supporting the team in the delivery of development projects.
Working on Wireless/Cellular based Hardware Development and testing.
Compliance testing.
Testing and verifying product performance / endurance against design specifications and producing test reports.
Hands on debugging / reworking, hardware bring up, use of standard lab equipment.
Knowledge of Altium designer (or other similar CAD packages).
Design for manufacturing and Design for testing.
The Senior Hardware Engineer, Cambridge, will ideally have a qualification in Electronics and will have the following experience:
Ability to use industry standard CAD tools + library management.
Knowledge of Telecommunication standards, 2G, 3G, LTE, CDMA with knowledge of cellular protocol stack.
Knowledge of Protocols TCP/IP, Sockets, HTTP etc.
Knowledge of the RF basic concepts and the RF systems.
Design / schematic capture / PCB Layout / validation.
The successful candidate will join a highly technical team of engineers tasked with creating the next generation of cutting-edge products which will provide significant growth to the organisation.
This opportunity would be ideal for a graduate engineer with 5-10 years' work experience in hardware development and testing.
There are working from home options available with this role.
APPLY NOW for the Senior Hardware Engineer, Cambridge, job by emailing your CV to NDrain@redlinegroup.Com ....Read more...
Type: Permanent Location: Cambridgeshire, England
Start: ASAP
Salary / Rate: £55000 - £60000 per annum
Posted: 2024-11-02 00:00:03
-
Software Test Engineer required to build and test software that is developed internally for Microsoft Windows desktop applications.
Skills
Test Automation programming and scripting for software build and test.
Software Engineering Lifecycle knowledge, test and integration particularly.
Testing software for PCs running Windows.
Writing test plans, specifications and reports.
Software installer experience, ideally build and development.
Degree in Software Development, Computer Science or equivalent.
Role
Software test and build. ....Read more...
Type: Permanent Location: Enfield, England
Start: ASAP
Duration: Permanent
Salary / Rate: £28000 - £40000 Per Annum None
Posted: 2024-11-01 18:55:17
-
Do you have experience with troubleshooting and maintenance of HPLC / LCMS equipment?
We are currently looking for a Field Service Engineer to join a leading Life Science company based in the Milton Keynes area.
As the Field Service Engineer you will be responsible to install, validate, maintain, and repair analytical laboratory equipment across the UK.
The role will cover the Southeastern England/Cambridge territory with occasional travel across the UK so the ideal candidate would be based in this region.
KEY DUTIES AND RESPONSIBILITIES:
Your duties as the Field Service Engineer will be varied however the key duties and responsibilities are as follows:
1.
You will be well-versed in all HPLC products, with a focus on the pertinent Service Schedules that are offered to the companies clients.
2.
The Field Service Engineer will work as part of an experience team offering first class customer support and with time will also move onto cover LCMS single and triple Quads.
3.
You will perform installation/validation of new instrumentation (IQOQ.PQ Testing) and maintain accurate inventory of spare parts in car stock.
4.
As the Field Service Engineer you will also report of all the Service jobs using SAP in a timely manner whilst troubleshooting with 48 Hour Response times.
ROLE REQUIREMENTS:
To be successful in your application to this exciting opportunity as the Field Service Engineer we are looking to identify the following on your profile and past history:
1.
Relevant degree in a scientific discipline is ideal.
2.
Proven industry experience in HPLC / LCMS as well as a background of maintenance and troubleshooting skills in a GLP/GMP environment.
3.
Experience with other Analytical Instrumentation such as MALDI, Prep LC and SFC is beneficial but not essential.
Key Words: Field Service Engineer | HPLC | LCMS | MALDI | Prep LC | SFC | Maintenance | GMP | GLP | Service Schedules | Installation | Validation | Instrumentation | IQOQ | SAP | Troubleshooting |
Hyper Recruitment Solutions Ltd (HRS) is an Equal Opportunities employer who are certified by Investors in People for talent development.
We therefore welcome applications for any interested parties who fulfil the role requirements for this position.
HRS is a company exclusively supporting the science and technology sectors, and is made up of a collaboration of recruitment professionals and scientists.
We look forward to helping you with your next career moves. ....Read more...
Type: Permanent Location: St Albans,England
Start: 01/11/2024
Salary / Rate: Dependent on experience
Posted: 2024-11-01 17:22:09
-
Holt Engineering have a fantastic opportunity to work within a leading meachanical electronics business based in Poole.
Our client is looking for an Electronic Assembler to join their ever growing team within a state of the art building.
If you would like the opportunity to work within a business that is passionate not only about what they do but the people that work with them.
This would be an oppotunity to grow your skillset within a inovative business that knows no limits in terms of progression.
This role is working on a temp-perm basis Monday to Friday 7:30-4:30 with an early finish on a Friday.
The payrate will be £11.44ph- 12.00ph DOE.
What this company can offer you as an Electrical Assembler :
- A friendly and supportive environment
- Day shift & No weekend work
- Overtime at a higher rate
- Large catalogue of products so lots of variety
- Working within a futuristic, state of the art building
- The opportunity to go permanent after 12 weeks
The duties of an Electrical assembler will be :
- Following drawings/ diagrams
- Soldering
- Electrical wiring and building circuits
- Using hand and power tools
- Mechanical assembly of externals
- Testing products
To be successful for this Electrical assembler role you will need to:
- Use tools regularly
- Able to work to targets and deadlines
- Be able to follow instructions
- Have an excellent attitude towards work
- Are punctual & can show commitment to the company
- Have a good level of electrical knowledge
If you're interested in this role as an Electrical Assembler - APPLY NOW and Aisha will call you! ....Read more...
Type: Contract Location: Poole,England
Start: 01/11/2024
Duration: 12.0 WEEK
Salary / Rate: £11.44 - £12 per hour
Posted: 2024-11-01 16:57:07
-
An exciting Traffic Signal Engineer job has arisen to join a Cheltenham based industry leader in the design and development of the latest traffic management technology.
The successful candidate will have a strong track record in leading teams in the design of effective signalling schemes.
Skills and Responsibilities of this Traffic Signal Engineer job are:
Design signal schemes
Deliver training
Continuous improvement of processes
Collaborate with design teams
Additional benefits of the position:
Private healthcare
Hybrid working
Bonus scheme
This Traffic Signal Engineer job is to join a highly successful technology company in the Cheltenham and play an important role in their projects going forward.
To apply for Traffic Signal Engineer job based in Cheltenham, please send an up-to-date CV to Ben Wiles at bwiles@redlinegroup.Com or call 01582 878816 or 07471181784.
....Read more...
Type: Permanent Location: Cheltenham, England
Start: ASAP
Salary / Rate: £40000 - £60000 per annum
Posted: 2024-11-01 16:39:19
-
An exciting Project Manager job based in Cheltenham has arisen to join an industry leader in the design and development of the latest technology, that forms part of the transport infrastructure, and are used by their customers to provide safe and efficient management systems for traffic and pedestrians.
The successful candidate will have a strong track record in delivery of engineering projects; you will be self-motivated, enthusiastic, technically excellent, business savvy and a strong communicator.
Skills and Responsibilities of this Project Manager job in Cheltenham are:
- Experience of managing development projects with a high technical content is essential.
- Provide technical leadership and direction to cross functional project teams (hardware, software, mechanical).
- Passionate about product development and keen to promote innovation.
- Experience of manufacturing would be useful.
- Project management training / certifications e.g.
APMP is useful but not essential.
Benefits include hybrid working, a company bonus and future progression within the company.
This Project Manager job is to join a highly successful technology company in Cheltenham and will play an important role in their projects going forward.
To apply for this Project Manager job based in Cheltenham please send an up-to-date CV to Ben Wiles at bwiles@redlinegroup.Com or call 01582 878816 or 07471 181 784. ....Read more...
Type: Permanent Location: Cheltenham, England
Start: ASAP
Salary / Rate: £45000 - £65000 per annum
Posted: 2024-11-01 16:37:07
-
An exciting Service Engineer job has arisen to join an industry leader in the design and development of the latest traffic management technology.
The successful candidate will have a strong track record in technical service engineering and be willing to cover a region of London to Manchester.
Skills and Responsibilities of this Service Engineer job are:
Strong technical expertise in Engineering
Remote/site technical assistance (On-call work)
Deliver exceptional customer service experience
Continuous improvement of processes
Able to cover the region of London to Manchester
Additional benefits of the position:
On-call remuneration
Field/home based
Private healthcare
This Service Engineer job gives the opportunity to join a highly successful technology company in the Cheltenham area, and play an important role in their projects going forward.
To apply for this Service Engineer job, covering London to Manchester, please send an up-to-date CV to Ben Wiles at bwiles@redlinegroup.Com or call 01582 878816 or 07471181784. ....Read more...
Type: Permanent Location: London, England
Start: ASAP
Salary / Rate: £40000 - £55000 per annum
Posted: 2024-11-01 16:35:15
-
DEPUTY HEAD OF ENGINEERING AND MAINTENANCEThis role represents an excellent opportunity to play an integral part in maintaining the operational integrity of the company's complex facilities and supporting systems and to become involved with further development of these world leading capabilities.Reporting to the Head of Engineering, the Deputy Head of Engineering and Maintenance will support the Engineering team and assist in maintaining operational quality and delivery, by focussing on the development and maintenance of continuous improvement programmes, processes and procedures, to ensure the Department meets the needs of the business and maintains compliance with changing legislation and standards, during a period of significant capital investment.This is an excellent opportunity for an experienced and confident manager with strong leadership and stakeholder management skills to be part of the on-going evolution and success of the company.Deputy Head of Engineering and Maintenance - main roles and responsibilities, Ensure that modifications, operation and maintenance processes meet the company Quality, Health and Safety, and Environmental standards., Ensure that the appropriate process is applied for any works resulting in both temporary and permanent modifications and changes to equipment and infrastructure including appropriate design reviews, and that such modifications and changes to the systems or deviations from the design configurations are visible, understood, documented and controlled., Maintain a good understanding of technical assets, equipment and testing methods being used in the R&D facility through communication with other managers, attendance of design reviews, plant meetings, etc…, Working closely with the Engineering Services Manager and Site Services Team Lead, review and ensure the operating requirements and instructions required to maintain the integrity of the system designs are delivered in accordance with the operating manuals and specified requirements., Review maintenance progress, actions and status, approving or rejecting any deviations from the plan including deferral of maintenance tasks or temporary changes to the system, in consultation with the relevant Engineering Manager., Attend Engineering team leadership meetings, develop and maintain appropriate reports and KPIs, participate in setting the department's annual budget and share in the responsibility of managing performance to that budget., Support the Head of Engineering with the day-to-day management of the Engineering team.Deputy Head of Engineering and Maintenance - Qualifications, Skills & Experience, A good level knowledge of mechanical or electrical engineering gained through experience with complex engineering products or industrial machinery., Demonstrable experience of working with and implementing changes to engineering design processes and engineering drawings within an industrial quality management system., A Degree in Mechanical or Electrical Engineering (or similar subject) or equivalent knowledge gained through experience.
Preferably Chartered Engineer status or equivalent experience., Demonstrated leadership experience in a technical environment preferably with 5+ years' experience., Experience of managing a diverse and multi-experienced team of engineers.
Providing direction to those more experienced, and guidance and development to the junior members of the team.Deputy Head of Engineering and Maintenance - Attributes, Capable of understanding complex systems, analysing data and applying problem-solving techniques in a logical, competent and timely manner., Ability to improve standards and be driven by continuous improvement., A positive behaviour set with great communication and collaboration skills., Have a desire to succeed, ability to work under pressure and be prepared for out-of-hours working from time to time., Have commercial awareness and some client relationship management experience.The successful candidate must satisfy security clearance requirements - including the last 5 years continual UK residency.Deputy Head of Engineering and Maintenance previous suitable job titles: Engineering Manager, Maintenance Manager, Assistant Head of Engineering, Assistant Head of Maintenance, Senior Engineering Manager, Senior Maintenance ManagerPlease apply ASAPDue to current high volumes of applications to our advertised jobs, we are unable to respond to every application.
All successful candidates will be contacted as soon as possible. ....Read more...
Type: Permanent Location: Bedford, England
Start: ASAP
Salary / Rate: £50000.00 - £70000.00 per annum + DOE + PHealth, Life, Pension
Posted: 2024-11-01 16:04:58
-
Product Design Engineer
We are seeking a Product Design Engineer to join our innovative team.
This role is ideal for someone who thrives in a vibrant environment, has passion for product design, and enjoys leading New Product Introduction (NPI) projects from concept to production.
As Design Engineer you will be a key member of the team, working closely with cross-functional departments, including Quality, Sales, and Marketing, to drive product performance and ensure our solutions meet customer needs.
You will also play a pivotal role in solving existing product challenges, conducting failure mode analysis, and ensuring industry compliance.
This is a unique opportunity to join a growing, innovative company where you will have the chance to shape the future of the product offerings.
The company offers a dynamic work environment, opportunities for career growth, and the chance to work on exciting new products from concept to launch.
Location: Maidstone, Rochester, Gravesend, Dartford, Sittingbourne, Canterbury, Tonbridge, Ashford, Rainham, Aylesford, Faversham
Salary: £35K to £40K basic DOE + Pension + 25 days annual leave (plus BH 33 days total) + Discounts on Company Products + Free onsite parking
The Role:
Lead New Product Introduction (NPI) from initial concept through to production.
Create and refine 3D CAD models ideally using Solidworks and rendered conceptual images using Keyshot or similar tools.
Prepare supporting documentation, drawings, and graphics as needed.
Collaborate with New Product Development (NPD), Production, and Technical Service teams to resolve technical and quality issues.
Assist the Quality Manager with failure mode analysis, testing, and corrective actions.
Perform prototype testing and resolve design and functionality issues.
Ensure that all designs comply with industry-specific safety and compliance standards.
Manage and update drawing registers, specifications, BOMs, and assembly documentation.
Communicate design changes to suppliers and internal teams.
Demonstrated experience managing the entire product life cycle from concept to production.
Strong graphic design skills, with experience in Adobe Acrobat Suite (InDesign, Photoshop, Illustrator) and Keyshot or equivalent rendering software.
Strong time management and project management skills.
Proficient in MS Office (Word, Excel, Outlook, Teams).
Strong problem-solving skills, with a focus on customer-driven solutions.
How to Apply:
To apply for this Product Design Engineer role please send your CV to Robert Cox, Senior Recruitment Consultant at Glen Callum Associates ltd on or call Rob on 07398 204832
JOB REF: 4173RC - Product Design Engineer ....Read more...
Type: Permanent Location: Rainham, England
Start: 01/12/2024
Salary / Rate: £35000 - £40000 per annum + + pension + discount on company products
Posted: 2024-11-01 16:00:11
-
An opportunity has arisen for Senior Structural Engineer with6 years PQE to join a versatile consultancy firm.
This permanent role offers competitive salary and excellent benefits.
As a Senior Structural Engineer, you will lead project teams and manage all aspects of structural design for diverse construction projects.
You will be responsible for:
* Oversee the financial, technical, and project management aspects of assigned projects.
* Conduct site visits, prepare outline briefs, and review project information, including planning history and services.
* Develop preliminary layouts, assist in budgeting, programming, and risk assessment.
* Prepare technical specifications and detailed designs for architectural projects.
* Collaborate and liaise with architects, clients, subcontractors, and other professionals, maintaining a professional representation of the firm.
* Evaluate the sustainability and environmental impact of projects.
What we are looking:
* Previously worked as a Structural Engineer, Senior Structural Engineer, Structural Design Engineer, Civil Engineer or in a similar role.
* At least 6 years PQE in structural design.
* Able to prepare structural designs across conventional materials and experience with refurbishment projects.
* A degree in Structural or Civil Engineering.
* Progressing towards Chartered status.
* Skilled in producing schematic structural designs based on basic architectural layouts.
What's on offer:
* Competitive salary
* 25 days holiday
* Pension scheme
* Additional holiday
* Long service awards
* Study leave
* On-site parking
* Cycle to work scheme
* Cinema voucher scheme
* Paid professional membership
* Yearly flu vaccine & eye tests
* Enhanced maternity & paternity pay
* Regular CPD seminars & social events
* Salary sacrifice & death in service scheme
* Interest free loan for annual travel season ticket
* Free refreshments, including tea, coffee, juice and fresh fruit
* Paid and towards glasses, if require for solely for VDU work
Apply now for this exceptional Senior Structural Engineer opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner.
In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message.
For more information see our Privacy Policy on our website.
It is important you are aware of your individual rights and the provisions the company has put in place to protect your data.
If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Type: Permanent Location: Hemel Hempstead, England
Start:
Duration:
Salary / Rate: £45000 - £70000 Per Annum
Posted: 2024-11-01 15:16:17
-
PLC Software Engineer required to join a growing team delivering exceptional water and wastewater client services and innovative solutions.
Key skills
PLC Programming commercial experience ideally within water or wastewater industry.
Electrical control panel knowledge.
Electrical or Electronic Engineering qualifications and experience in system software engineering.
Automation and Process Control Equipment understanding.
Driving licence.
Role
PLC Software Engineering.
Design, develop, program and testing PLC systems.
Specify, design and build programs. ....Read more...
Type: Permanent Location: Nottingham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £32000 - £48000 Per Annum None
Posted: 2024-11-01 13:08:36
-
Product Design Engineer
We are seeking a Product Design Engineer to join our innovative team.
This role is ideal for someone who thrives in a vibrant environment, has passion for product design, and enjoys leading New Product Introduction (NPI) projects from concept to production.
As Design Engineer you will be a key member of the team, working closely with cross-functional departments, including Quality, Sales, and Marketing, to drive product performance and ensure our solutions meet customer needs.
You will also play a pivotal role in solving existing product challenges, conducting failure mode analysis, and ensuring industry compliance.
This is a unique opportunity to join a growing, innovative company where you will have the chance to shape the future of the product offerings.
The company offers a dynamic work environment, opportunities for career growth, and the chance to work on exciting new products from concept to launch.
Location: Maidstone, Rochester, Gravesend, Dartford, Sittingbourne, Canterbury, Tonbridge, Ashford, Rainham, Aylesford, Faversham
Salary: £35K to £40K basic DOE + Pension + 25 days annual leave (plus BH 33 days total) + Discounts on Company Products + Free onsite parking
The Role:
Lead New Product Introduction (NPI) from initial concept through to production.
Create and refine 3D CAD models ideally using Solidworks and rendered conceptual images using Keyshot or similar tools.
Prepare supporting documentation, drawings, and graphics as needed.
Collaborate with New Product Development (NPD), Production, and Technical Service teams to resolve technical and quality issues.
Assist the Quality Manager with failure mode analysis, testing, and corrective actions.
Perform prototype testing and resolve design and functionality issues.
Ensure that all designs comply with industry-specific safety and compliance standards.
Manage and update drawing registers, specifications, BOMs, and assembly documentation.
Communicate design changes to suppliers and internal teams.
Demonstrated experience managing the entire product life cycle from concept to production.
Strong graphic design skills, with experience in Adobe Acrobat Suite (InDesign, Photoshop, Illustrator) and Keyshot or equivalent rendering software.
Strong time management and project management skills.
Proficient in MS Office (Word, Excel, Outlook, Teams).
Strong problem-solving skills, with a focus on customer-driven solutions.
How to Apply:
To apply for this Product Design Engineer role please send your CV to Robert Cox, Senior Recruitment Consultant at Glen Callum Associates ltd on or call Rob on 07398 204832
JOB REF: 4173RC - Product Design Engineer ....Read more...
Type: Permanent Location: Maidstone, England
Start: 01/12/2024
Salary / Rate: £35000 - £40000 per annum + + pension + discount on company products
Posted: 2024-11-01 12:00:11
-
Position: Software Design Engineer
Location: Dublin
Salary: DOE
Responsibilities:
Proactively collaborate as part of the wider design department to scope befitting technical solutions for projects.
This would include hardware specification such as safety devices, communication architectures/protocols etc, where product selection would have direct implications on the software
Apply commercial awareness when determining solutions suitable to the price point of the
Write and test code for large scale projects (Motion, Robotics, Integrating 3rd Party Equipment, PLC,HMI
Author (internal/external) design philosophy documents to support the intended functions of the automated equipment.
Ensuring all software is written, documented, and controlled in accordance with company procedures and
Ensure that the solutions determined adhere to all relevant Codes of Practice, Company, and Industry
Maintainan awareness of existing and emerging technologies to ensure company remains at the forefront of the industry.
Develop and maintain code libraries and standardised practices to deliver commonality and reduce commissioning timelines.
Review customer project documentation to fully understand project
Participate in customer meetings of either existing or potential
Requirements:
The following list is an indication of the skills that the successful candidate will possess, in fulfilment of the position.
Degree in relevant engineering discipline or equivalent recognised
Proven electrical, pneumatic, and mechanical experience within the automation
Ability to follow electrical and pneumatic schematic diagrams and
Comprehensive knowledge of diagnostics, test, and repair of electronic/electrical and mechanical
Thorough knowledge of safety procedures and applicable regulations and
Programming experience of PLC's/HMls.
Primarily Rockwell's suite of automation software, but knowledge of Mitsubishi, Siemens, B&R, and Codesys would be advantageous.
Knowledge of script-based programming would be an
In depth knowledge of Motion Control and 6 Axis Robot
Experience with robotics, Al and machine
Solid understanding of computer programming and software
Ability to troubleshoot equipment and perform complex system
A desire to continually upgrade technical
Ability to work under pressure to meet
Excellent critical thinking and problem-solving
Strong leadership and problem-solving
Excellent organizational skills and attention to
Excellentverbal and written communication
Good working knowledge of Microsoft Office software
If the position above is of interest to you and you would like to know more call Arlene on 0860651940 in complete confidence.
AC
....Read more...
Type: Permanent Location: Dublin, Republic of Ireland
Start: asap
Posted: 2024-11-01 11:45:23
-
Mechanical Design Engineer (CAD Tooling) - SE London - circa £45 per hour (Umbrella) - ContractJob Description: Join our client on a long term contract ensuring the seamless industrialisation and introduction of new submerged cutting edge products into production.
Define and design tooling and equipment to streamline assembly while maintaining the highest quality and reliability.Key Responsibilities:
Collaborate with Supply Chain and R&D Engineers to design and industrialise new products.
Define and design tooling such as jigs, lifting fixtures, work stations for efficient assembly and testing.
Propose alternative tooling solutions for improved efficiency.
Utilise Creo CAD for tooling design and modelling.
Present new tooling concepts effectively.
Source external equipment to enhance production.
Liaise with Tooling Manufacturers for timely delivery and compliance.
Inspect new tooling for specification compliance.
Define calibration periods and inspection requirements.
Validate new tooling for suitability.
Oversee qualification model builds.
Requirements:
Engineering degree or equivalent
Experience in Creo CAD is preferred
Strong background in designing tools and equipment used in assembly and manufacturing
Ability to make reliability engineering judgments
Simulation stress analysis work - FEA using Ansys
Experience in technical or manufacturing environments
Strong interpersonal, communication and team skills
How to apply: To apply for this excellent opportunity, please send your CV ....Read more...
Type: Contract Location: London, England
Salary / Rate: £42 - £45 per hour + Umbrella
Posted: 2024-11-01 11:30:54
-
Mego Employment LTD is excited to present an exceptional opportunity to join our client's renowned manufacturing site in the vibrant city of Plymouth.
We are seeking a skilled, Maintenance Engineer to become a key member of their team.
In this crucial role, you'll be responsible for ensuring the efficiency of our client's production facilities by maintaining and servicing plant equipment and infrastructure.
Key Responsibilities:
Work collaboratively with the team to meet and exceed performance benchmarks.
Uphold a culture of safety by conducting thorough risk assessments before undertaking tasks.
Support machinery relocations and contribute to Total Productive Maintenance (TPM) and Planned Preventative Maintenance (PPM) initiatives across the site.
Maintain accurate electronic records of machine repairs and stock management.
Proactively identify and address site hazards, including those observed and reported by colleagues.
Essential Qualifications:
3-5 years of experience in an Electrical Maintenance role.
Formal apprenticeship in Electrical Engineering or Electromechanical Engineering.
Additional experience in Mechanical Engineering is a significant advantage.
Minimum of BTEC Level 3 or ONC (equivalent); HNC or higher qualifications are highly preferred.
Flexibility to work shift patterns (Annualised Hours), including overtime and on-call commitments.
The annualised hours shift pattern involves a 1 in 6 rotation: 1 week of nights, 1 week of back shifts, and 4 weeks of daytime shifts every 6 weeks, with 1 weekend duty every 6 weeks and corresponding weekdays off.
Submit your application by uploading your CV through this website.
Mego Employment LTD acts as an employment agency for permanent staff and an employment business for temporary workers.
....Read more...
Type: Permanent Location: Plymouth, England
Salary / Rate: £42000 - £45500 per annum
Posted: 2024-11-01 10:56:53
-
Electrical Technicians
I am currently looking for Electrical Technicians for the Poole and Bournemouth area.
If you have any IPC qualifications that would be advantageous.
- Wiring- working from electrical drawings.
- Installation of electrical panels into machines.
- Undertake electrical tests, safety check and complete appropriate documentation.
- Supporting a culture of continuous business improvement.
Experience required for an Electrical Technician.
- Time served apprenticeship or suitable gained experience in an electrical assembly role.
- At least 2 years of experience of panel board population
- Machine Wiring and testing of complex Electric-mechanical machines.
- Ability to read and understand electrical circuit drawings.
Knowledge required for an Electrical Technician:
- Knowledge of different voltage systems
- A good understanding of electrical wiring diagrams.
- Systematic approach to your work with attention to detail
- Flexibility and curiosity with willingness to learn and apply themselves to areas with which they are not familiar.
If you are looking to move into your next role as an Electrcial Technician please apply or alternatively call Ian at Holt Engineering on 07734406996.
'' ....Read more...
Type: Permanent Location: Poole,England
Start: 01/11/2024
Salary / Rate: £26000 - £32600 per annum
Posted: 2024-11-01 07:17:03
-
Holt Engineering are looking for a Skilled Mechanical Fitter to join our client based near Christchurch Airport.
This position of Skilled Mechanical Fitter will be required to repair, overhaul & modify a variety of Mechanical, Pneumatic, Heat Transfer, Electronic, Air Turbines and Electro-mechanical aircraft components in accordance with the Code of Federal Regulations, European Aviation Safety Agency Regulations & Repair Station Processes.
This includes all aspects of the repair process including: Diagnostic fault finding, strip, initial inspection, parts call up, build & Testing of the final units.
These must be compliant with Component Maintenance Manuals, Engineering drawing requirements and customer requirements for on time delivery and contracted turn time.
Responsibilities of a Skilled Mechanical Fitter:
- Interpret Component Maintenance Manuals Service Bulletins & other Technical data approved by the regulator required to perform the Repair & Overhaul duties.
- Perform a preliminary inspection of the unit to include a diagnostic test, dis assembly, cleaning & component inspection.
- Determine the material required to Overhaul/Repair
- Repair/Overhaul & assemble the unit in accordance with approved technical data.
- Perform final test of the unit in accordance with approved data to determine eligibility for return to service
- Prioritise & process units in order to meet customer due dates.
- Process units in accordance with the Quality Management System.
& Repair Station Manual & MOE.
If you have the required skills and experience then please click apply or contact Ian at Holt Engineering on 07734406996
'' ....Read more...
Type: Contract Location: Christchurch,England
Start: 01/11/2024
Duration: 1.0 HOUR
Salary / Rate: £18.01 - £18.41 per hour
Posted: 2024-11-01 07:16:03
-
Our client is a leading provider of 4G, 5G (LTE) and wireless connectivity solutions for public and private networks.
Based in Berkshire, they are expanding their team and seek and experienced Senior FPGA Design Engineer to work on a number of exciting projects.
The Senior FPGA Design Engineer, Berkshire, will be responsible for the design and development of FPGA for a 5G Base Station product line.
The role involves developing board control logic, high speed interconnect and data path in a multi-processor/multi-device topology.
The role will include verification at block level, end to end simulation and integration, test and debug on the hardware platform.
Other responsibilities include:
- Design and maintenance of FPGA functions for a 5G radio product line.
- Full design verification and testing.
- Preparation of design specifications and documentation including definition of software device drivers and interfaces to other systems / processors.
The successful Senior FPGA Development Engineer, Berkshire, will have a blend of the following:
- - Knowledge of wireless, LTD 4G or 5G standards - signal processing
- A deep understanding of FPGA fabric and clocking resources
- Proficiency in hardware programming languages (Verilog and/or VHDL)
- Experience with RTL-level design, simulation and verification
- Experience with design and implementation using Avalon and/or AXI4 interfaces
APPLY NOW for this exciting Senior FPGA Design Engineer job by sending your CV and Cover letter to NDrain@RedlineGroup.Com ....Read more...
Type: Permanent Location: Berkshire, England
Start: ASAP
Salary / Rate: £60000 - £80000 per annum
Posted: 2024-11-01 00:00:10
