-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
As a member of the fabrication team, the Production Assembler performs assigned tasks that include, but are not limited to, producing architectural shapes, Exterior Insulation and Finish System (EIFS) wall components, and exterior panel systems.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Follows the daily production schedule set by the Production Supervisor. Reads fabrication drawings and tape measurements to prepare materials for assembly. Uses hand power tools to trim corners and fold panel returns. Pre-drills aluminum parts as required. Applies silicone sealant to aluminum extrusions. Attaches aluminum parts using set screws. Assists in building custom crates based on project specifications. Prepares and organizes parts for shipment. Assists with shipping and receiving. Follows all safety requirements. Cleans equipment after use and assists the team in keeping production space clean and organized. Assists with monthly inventory counts.
EDUCATION:
No formal educational requirement. High School Diploma or GED equivalent preferred.
EXPERIENCE:
No prior experience or training. Previous work in a construction, manufacturing, or similar environment preferred. Previous work in the aluminum panel or window industry is preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment, and moral courage. Demonstrates accepted ethical and professional business behavior. Executes ISO authority and responsibility.
Completes and maintains all required training.
Reports suspected violations including those of a business associate. Observes all safety procedures, reports potentially unsafe conditions, and uses and maintains equipment and materials properly.
BENEFITS AND COMPENSATION:
The hourly rate for applicants in this position generally ranges between $15.85 and $18.98.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Carrollton, Texas
Posted: 2024-05-16 15:14:57
-
Want to Work with a leading high-performance engineering company in the motorsports industry in the Wellingborough area, specialising in EV technology, offers an unparalleled experience at the forefront of innovation.
Integrating advanced materials, state-of-the-art software, and rigorous testing protocols, the team drives technological advancements that set new benchmarks in the industry.
As the Team Lead - Control Systems, you'll also be responsible for fostering a culture of continuous improvement, engaging in ongoing research to enhance our engineering capabilities, and supporting cross-functional teams to optimise designs and drive business growth.
As the Team Lead - Control Systems You will have a Bachelor's or Master's Degree in a relevant engineering discipline.
Experience in:
Leading the engineering of automotive or motorsport systems/components as part of an OEM, Tier 1 supplier, engineering consultancy or motorsport team.
Managing, scheduling, budgeting, and resourcing of a significant engineering task or project.
Working on up to 800V systems as a Senior Authorised Person/Person in Charge.
Developing code for applications such as BMS, charging, vehicle control, etc.
at a senior level
Skills Required:
Expert in the use of a high-level software packages such as Matlab / Simulink.
Expert in programming languages such as model based code generation, Python, C, C++, C#, etc.
Expert in the production and checking of engineering documents, models, calibrations, reports, etc.
Expert in software debugging using tools such as CANalyser, CANape, etc.
Knowledge of the Design Failure Mode and Effects Analysis (DFMEA) process.
Expert in applying structured problem-solving approaches and analytical tools such as 8D and Ishikawa.
Expert in the application/selection of relevant engineering analytical techniques, manufacturing processes, materials specifications & standard parts and is able to guide others.
Expert in the identification of applicable regulatory requirements and standards to produce designs to satisfy any such requirements.
Benefits:
25 days holiday plus Bank Holidays (increasing with service to 30 days)
On-site gym
Employee Assistance and Wellbeing Programme
Private Healthcare
Company Pension Scheme
Discount Car Scheme
Development and Training opportunities
Retail Discounts
Loyalty Rewards
Cycle to Work Scheme
Death in Service cover
If you are the Team Lead - Control Systems candidate for this role, please apply or reach out on 07584 591 222 to discuss in more detail.
....Read more...
Type: Permanent Location: Wellingborough, England
Salary / Rate: £80000 - £85000 per annum + Onsite gym, Wellbeing program, Car scheme
Posted: 2024-05-16 13:32:27
-
Position: Service Advisor
Location: Southampton
Salary: £26,000 - £30,000 per annum
About Us:
My client is a leading main dealership in Southampton who are seeking an experienced and enthusiastic Service Advisor to join their service department.
Key Responsibilities:
Welcome customers warmly and assess their service needs with professionalism and courtesy.
Schedule service appointments efficiently, managing workload effectively to ensure customer satisfaction.
Consult with customers to understand their vehicle's requirements, providing accurate estimates and advice.
Liaise between customers and service technicians, ensuring clear communication and timely updates.
Maintain accurate records of service transactions and customer interactions for reference and compliance.
Requirements:
Previous experience in a service advisor role within the automotive industry is desirable.
Exceptional communication and interpersonal skills, with a customer-focused approach.
Strong organizational abilities, with meticulous attention to detail.
Proficiency in computer systems and software, including dealership management tools.
Ability to thrive in a fast-paced environment, managing multiple tasks with ease.
Positive attitude, team player mentality, and a passion for delivering outstanding customer service.
Benefits:
Competitive salary with the potential for performance-based incentives.
Ongoing training and development opportunities to support your career growth.
Employee discounts on vehicle purchases, servicing, and parts.
Collaborative and supportive work environment, fostering diversity and teamwork.
Opportunity to work with leading automotive brands and cutting-edge technology.
Hammond Recruitment Group is acting as an Employment Agency in relation to this vacancy. ....Read more...
Type: Permanent Location: Southampton, England
Salary / Rate: £26000 - £32000 per annum
Posted: 2024-05-16 13:04:36
-
Assistant Branch Manager
An Assistant Branch Manager / Branch Supervisor with a hands-on mentality is required for the flagship branch of a family-run distributor supplying automotive, industrial, marine and leisure markets across the Southwest.
The Assistant Branch Manager / Branch Supervisor will support the Branch Manager in the day-to-day management of an established and experienced team of around 15, covering sales and distribution.
We are particularly keen to hear from candidates with an electrical wholesale, electrical distribution, automotive parts distribution, industrial distribution, engineering supplies or builder's merchants background, although this is by no means essential.
Branch Based - Commutable from - Bristol, Bath, Long Ashton, Stoke Gifford, Portbury, Portishead, Congresbury, Chew Magna, Warmley, Saltford, Thonbury, Nailsea, Iron Acton, Yate, Keynsham, Clevedon
££competitive salary + branch-based performance bonus + pension + 20 days holiday plus bank holidays + use of a company vehicle + full product training
The Candidate
Previous supervisor / team leader experience is required, ideally in a distribution or wholesale environment.
We are also open to candidates ready to make that step into an Assistant Branch Manager role.
Hands on sales experience and the ability to develop business relationships.
An understanding of branch operations.
A technical aptitude with the ability and willingness to learn, retain and relay product information.
Our ideal candidate may have experience of working within an electrical, industrial or Engineering wholesale environment or have an automotive parts distribution / motor factor background.
The Role
Demonstrate a hands-on approach providing support and assistance across all areas of the branch.
Support the Branch Manager (and deputise in their absence) across the following areas:
Provide training, coaching development and motivation to the team.
Be aware of and assess local market conditions and identify current and prospective sales opportunities.
Direct all operational aspects including distribution operations.
Liaise with buying and distribution teams at head office to ensure correct inventory levels are maintained.
Manage branch health and safety requirements in line with HSE legislation and company health and safety policies.
Work with the management team to achieve branch targets.
Locate areas of improvement and propose corrective actions to leverage growth opportunities.
Apply in Confidence
To apply for the position of Assistant Branch Manager / Branch Supervisor please forward your CV to Kayleigh Bradley, Senior Recruitment Consultant at Glen Callum Associates Ltd or call Kayleigh directly on 07908 893621 for a further chat on the job.
Don't delay, we're hiring now, apply today!
JOB REF 4121KB - Assistant Branch Manager - Distribution
Glen Callum Associates are a leading automotive and industrial recruitment agency for sales, operational and marketing positions. ....Read more...
Type: Permanent Location: Bristol, England
Start: 16/06/2024
Salary / Rate: ££competitive salary + branch based perf bonus
Posted: 2024-05-16 12:00:20
-
Assembly Fitter
£25,770.60 - 33,414.96
Outskirts of Maidstone
Monday to Thursday 06:30 - 15:30
Fridays 06:30 - 11:30
OR
Monday to Thursday 07:30 - 16:30
Fridays 07:30 - 12:30
KHR is working with a leading manufacturer in the outskirts of Maidstone who is looking for an Assembly Fitter to join their team! If you are someone who loves technical and physically demanding roles, then this is the role for you!
Duties include:
- To fit and assemble fabricated parts or subassemblies
- To be able to set up hydraulic & electrical systems including pressure testing
- To install hydraulic & pneumatic pipes and lines
- To install valves, pumps, and motors
- To complete electrical tasks such as laying, connecting, and securing wiring looms
- To complete fault diagnosis and ensure basic checks are complete on all electronic installs
- To be able to dismantle faulty assemblies and repair or replace defective parts
- To be able to use and adapt to air tools or socket sets
- To be able to lift and set large and awkward components
- To provide support with design/development tasks through the use of Engineer change notes/BOM variance
Candidate profile:
- Served technical apprenticeship or equivalent training
- Good technical knowledge of the products, with a willingness to undertake training
- Good communication skills
- Team player
- Excellent attention to detail
- Must be physically fit and cope with standing for long periods
They are hiring immediately, so send in your CV today!
At KHR we take the time to ensure that you are represented as well as possible so it is worth checking your CV for layout, spelling and grammar as well as making sure it is up to date before you submit.
If you feel the need to highlight particular qualifications, skills or relevant experience concerning a specific role then, please add a cover letter or a preface page.
This does not need to be formatted in the same manner.
In addition, if your CV is heavy with graphics etc, please could you also submit a "clean" copy in Word.
Thank you.
KH Recruitment Ltd is acting as an Employment Agency for this vacancy.
KHR - Recruitment Specialists is a trading name of KH Recruitment Ltd Keep in touch with us online for job alerts, industry updates and market...
At KHR we take care to ensure that you are represented as well as possible so it is worth checking your CV for layout, spelling and grammar as well as making sure it is up to date before you submit.
If you feel you need to highlight particular qualifications, skills or relevant experience with regards to a specific role then please add a cover letter or a preface page.
This does not need to be formatted in the same manner.
In addition, if your CV is heavy with graphics etc, please could you also submit a "clean" copy in Word.
Thank you.
KH Recruitment Ltd is acting as an Employment Agency in relation to this vacancy.
KHR - Recruitment Specialists is a trading name of KH Recruitment Ltd Keep in touch with us online for job alerts, industry updates and market...
....Read more...
Type: Permanent Location: Maidstone, England
Start: 20/06/2024
Salary / Rate: £25770.60 - £33414.96 per annum + + Benefits
Posted: 2024-05-16 09:35:51
-
Are you a Welder Fabricator? Are you looking for a company that takes pride in their staff? This is a great opportunity for someone who wants to be a part of a company that is going through a period of growth.
This is a permanent position:
Hours: 39 hours per week
Mon to Fri 07:30 to 16:30
Fri 07:30 to 12:30
Salary Bands 1 to 6 are £24,600 to £36000
This is an exciting opportunity for an experienced Welder/Fabricator to join a growing team.
As part of the role you will be required to:
To learn how to read engineering drawings and specifications and to plan layout, assembly, and welding operations.
To learn how to determine the kind of tools and equipment needed to do the job.
To learn how to lay out, position, and secure parts and assemblies according to specifications.
To learn how to pre-heat and clean metals, layout, cut, and fit materials for welding.
To learn how to select proper welding heat and the proper type and size of electrodes for correct penetration and strength of welded metals.
To learn how to carry out flat, vertical, and horizontal welding, coat non-ferrous metals, and inspect, brush, and grind welds.
To learn how to develop templates and other work aids to hold and align parts.
To learn how to perform routine maintenance on equipment and determine when and what kind of maintenance is required.
To learn how to Inspect equipment, structures, and materials to identify the cause of any errors or other problems or defects.
Performs physical activities that require considerable use of arms and legs and mobile whole body such as climbing, lifting, balancing, walking, stooping, and handling of materials.
Person Specification.
You will be required to develop your knowledge and learn the standard practices, methods, tools, and materials of the welder's trade.
Have an awareness of the occupational hazards and safety precautions of the trade.
Ability to understand and follow oral and written instructions
Ability to organise work and prioritise.
The ability to:
Stand for long periods.
Make fast, simple, repeated movements of the finders, hands, and wrists.
Keep hand and arm steady while moving the arm or while holding the arm and hand in one position.
Quickly move the hand, hand together with an arm, or two hands to grasp, manipulate or assemble objects.
See details at close range.
Quickly and repeatedly adjust the controls of a machine to exact positions.
Bend, stretch, twist, or reach with the body, arms, and/or legs.
At KHR we take care to ensure that you are represented as well as possible so it is worth checking your CV for layout, spelling and grammar as well as making sure it is up to date before you submit.
If you feel you need to highlight particular qualifications, skills or relevant experience with regards to a specific role then please add a cover letter or a preface page.
This does not need to be formatted in the same manner.
In addition, if your CV is heavy with graphics etc, please could you also submit a "clean" copy in Word.
Thank you.
KH Recruitment Ltd is acting as an Employment Agency in relation to this vacancy.
KHR - Recruitment Specialists is a trading name of KH Recruitment Ltd Keep in touch with us online for job alerts, industry updates and market...
....Read more...
Type: Permanent Location: Tonbridge, England
Start: 20/06/2024
Salary / Rate: £24600 - £36000 per annum + + Benefits
Posted: 2024-05-16 09:09:38
-
We are looking for a Sales Engineer to work on a permanent basis near Ashton Under Lyne.
Salary is c£32-40,000 per annum plus 25 days holiday and bank holidays, pension, life assurance etc
As a Sales Engineer, you will be part of a busy office environment that covers Sales, Projects, Engineering, Quality, and Management.
Your primary responsibility will be to provide essential administrative support to the Sales and Projects teams.
This role involves working on high-profile order books for leading OEMs, ensuring smooth communication and coordination with customers and suppliers.
Duties and Responsibilities: As a Sales Engineer, your main tasks will include but are not limited to:
Receiving and managing customer inquiries via email, phone, and other channels.
Analyzing Bill of Materials (BoM) to identify required manufacturing discipline(s).
Liaising with external suppliers when necessary.
Logging and tracking customer inquiries using internal trackers and online dashboards.
Expediting responses from suppliers to meet project timelines.
Calculating total costs for all BoM component parts to create accurate submission documents for customers.
Person Specification: To be successful in this role, you should possess the following qualities and qualifications:
Strong commercial awareness and customer-facing skills.
Background in Engineering with the ability to read engineering drawings.
Proactive and "can do" approach to work, with excellent communication skills.
Well-organized with a keen attention to detail.
Team player with a self-motivated and proactive attitude.
Proficient in using Microsoft Office Suite, particularly Excel.
Fast-paced, adaptable, and able to handle a variety of tasks.
Working Environment: This Sales Engineer position offers an office-based, fast-paced, and dynamic working environment.
You will have ample opportunities for professional development, including gaining skills in SAP, Excel, and procurement.
Comprehensive training will be provided to ensure you excel in your role.
If the Sales Engineer role could be of interest to you, please call Rebecca at GPW Recruitment or press APPLY NOW! ....Read more...
Type: Permanent Location: Ashton-Under-Lyne, England
Start: ASAP
Duration: Permanent
Salary / Rate: £32000 - £40000 per annum + holidays, pension
Posted: 2024-05-16 08:30:53
-
Parts Advisor
Job Title Parts Advisor
Salary up to £38000 per annum
Location Poole
Our client, a large commercial vehicle dealership with multiple sites is actively seeking to employ a Parts Advisor for their depot in the Poole area.
The successful applicant will work in the depots parts department ensuring that parts are efficiently distributed to the service mechanics / technicians across the various shifts worked on site.
As a Parts Advisor will be responsible for maintaining stock levels in the stores, ordering specialist parts as they are required and undertaking inventory checks to make sure all parts ordered are delivered and are the correct parts needed.
In order to qualify for the Parts Advisor role you must have experience working in the vehicle parts field, be computer literate, have excellent customer service skills and have a valid UK driving licence.
How to Apply for this Parts Advisor role.
If you are interested in finding out more get in contact with John Barnes on 07955 081 481, email john@holtrecruitment.com or send us your CV by Clicking Apply Now! ....Read more...
Type: Permanent Location: Poole,England
Start: 16/05/2024
Salary / Rate: £28000 - £32000 per annum
Posted: 2024-05-16 06:57:03
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
Supports all manufacturing and facility needs by repairing and/or maintaining all equipment necessary to do all jobs.
Assists in the installation and startup of new equipment to support all manufacturing and facility needs.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform routine and non-routine general/preventive maintenance to ensure machines and business systems continue to operate safely and efficiently, and the physical condition of equipment and buildings do not deteriorate. Respond to manufacturing and facility needs in a safe, timely, and effective manner to minimize production and operations downtime. Inspect drives, motors, belts, fluid levels, and filters. Assemble, install, or repair equipment components, plumbing, and machinery. Diagnose mechanical problems and determine how to correct them using prints, manuals, and/or catalogs as necessary. Operate wire and stick welding equipment. Operate cutting and other machine shop equipment (drill press) Operate tow-motor and scissor lift. Maintain maintenance area and parts stores in orderly and neat conditions. Follow up on work to ensure problems are resolved or operations continue safely and effectively. Perform work in a safe manner and follow all shop safety rules. Any other tasks as assigned.
EDUCATION:
High School diploma required. One-year certificate from college, technical school, or manufacturing training program preferred.
EXPERIENCE:
Minimum 2 years maintenance experience. Industrial maintenance is preferred. Experience in 480-volt 3 phase, and high voltage DC electricity preferred.
OTHER SKILLS AND ABILITIES:
Ability to troubleshoot electric, air systems, and hydraulic systems. Knowledge of lockout/tagout, arc flash requirements, and hot work permit. Ability to work overtime as needed; ability to meet deadlines. Ability to manage multiple priorities and respond urgently to down equipment. Effective team player, self-motivated, and a quick learner. Good communication skills with the ability to read, write, and communicate fluently in English and effectively. Knowledge of rubber extruders/molding presses is a plus, but not required.
OTHER QUALIFICATIONS:
OSHA safety preferred.
BENEFITS AND COMPENSATION:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, performance-based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Ashland, Ohio
Posted: 2024-05-15 23:09:46
-
We are looking for a Supervising Social Worker for this well thought of organisation.
You must have a Diploma/Degree in Social Work and the right to work in the UK (no VISA sponsorship)
About the team
This organisation is committed to safeguarding and promoting the welfare of Children and their families and work with a therapeutic approach to Fostering.
The caseload would be located around the Northern parts of the East Midlands.
About you
The successful candidate will have experience within Children's Social Work post qualification whilst having an up-to-date understanding of relevant legislation.
What's on offer?
Up to £39,000 dependent on experience
Mileage covered & Car Allowance
Hybrid working
Training & development opportunities
Hours: Full time / Permanent
For more information, please contact Jamil Olweny
07587 031 098 / jolweny@charecruitment.com
#IND-CH-SCLWK-PRM24 ....Read more...
Type: Permanent Location: East Midlands, England
Salary / Rate: £34000 - £39000 per annum + benefits
Posted: 2024-05-15 21:00:02
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: The Product Manager is responsible for ensuring Tremco is properly addressing the changing needs of the marketplace as it relates to our product line offerings for the Commercial Sealants and Waterproofing market segments in North America.
This high-energy position will support our high-performance building envelope strategy from a marketing perspective with an emphasis on the technical aspects of the products and the connectivity between adjacent building enclosure systems.
This critical, hands-on position plays an integral role in the day-to-day tactical operations and the strategic growth of the product line.
TREMCO'S EXPECTATIONS FOR ALL LEADERS:
Embodies the company's core values of transparency, trust, and respect by demonstrating integrity, commitment, responsible entrepreneurship, and moral courage.
Applies the company's policies and adheres to processes to ensure compliance and organizational best practices.
Demonstrates a commitment to diversity, equity, and inclusion in all areas of responsibility such as hiring and promotion decisions.
Effectively and efficiently onboards new employees.
Conducts annual performance evaluations and provides ongoing performance feedback, maintaining clear and timely documentation.
Coaches and manages employees using the company's philosophy and tools to ensure talent is developed and retained.
Constructs succession plans to ensure sustainability and continuity of area of responsibility.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Works to understand the features and capabilities of the products, how they relate to customer benefits and uses, and how the product compares to competitive or substitute products and solutions.
Identifies testing and performance gaps in the CS&W offering and works with Technical Services and Research and Development (R&D) to address them. Participates, and at times leads, presentations or break out groups at regional meetings Builds a solid understanding of the market size and competitive landscape for product lines. Leads and manages cross-functional product-related teams as needed for improvements to the product line or related processes. Tracks competitive launches/activity and maintains a current understanding of the competitive landscape to assist in the identification of new product improvements/opportunities. Work closely with Category Manager and business analytics to determine market opportunities for assigned products. Executes all duties within the framework of the budget for the current fiscal year. Conducts proof of concept work for all Project Portfolio Optimization Group (PPOG) projects that fall within the line. Supports Category Manager with development and coordination of product launches and product promotions Works closely with Marketing Communications on product and brand messaging. Owns all online product line content and works closely with Technical Services and Marketing Communications to ensure content remains accurate and current. Works closely and collaboratively with Technical Services and Operations to resolve product issues, Supply Chain/Procurement to facilitate accurate forecasts as well as other functional areas to develop and maintain accurate sales tools, such as brochures or presentations. Participates in cross-functional projects and strategic initiatives as needed Owns product launches and all related marketing tasks associated with them. Owns and manages the day-to-day activities of the product line and works with the business to create a plan to define the go-forward strategy.
EDUCATION REQUIREMENT: Bachelor's degree in marketing or related field, MBA preferred.
EXPERIENCE REQUIREMENT: 1+ years of product management experience preferably in the construction industry.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Ability to grasp technical details Strong organizational skills Ability to understand relationships and connections and generate charts, graphs, spreadsheets, and written summaries. Excellent written and oral communication skills Ability to take direction well Ability to travel 25-30% Proficient in MS Word, MS Excel and MS PowerPoint. SAP experience is a plus.
Ability to manage multiple priorities, effective team player, self-motivated, quick learner.
PHYSICAL DEMANDS: The incumbent must be able to stand, walk, sit, use hands, reach, kneel, talk, hear, and lift up to 25 lbs.
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally ranges between $71,506 to $80,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2024-05-15 15:13:18
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America
GENERAL PURPOSE OF THE JOB: Ensures that the assigned revenue, margin and product mix objectives, within the corporate business framework, are met or exceeded.
This is to be accomplished by securing, developing, and managing key architects, designers, general contractors, distributors, subcontractors, and end-user accounts.
This position will also own and manage all related performance and service metrics for the assigned accounts in the Willseal Product Line.
The territory is the North Central Region, including, IL, WI, MN, IA, NE, N&S Dakota.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Achieves or exceeds assigned sales goals and expectations.
Works primarily with existing accounts, while seeking and developing new account opportunities to influence and increase the use of Tremco CPG products in assigned territory.
Manages assigned accounts to establish business development opportunities through account penetration, analysis, partnership with key decision makers, and strategic initiatives.
Drives product specifications and project opportunities throughout assigned territory.
Leverages industry knowledge, marketplace dynamics, and key relationships both internally and externally to develop trusted partnerships and advisory relationships with customers with a focus on problem identification, exploration, and resolution.
Annually prepares and delivers strategic business/territory plans for each customer with monthly forecasts.
Consistently and efficiently follows the standard sales process to identify prospects and decision makers, gain customer commitment, predict sales probability, and effectively close deals.
Manages day-to-day contact, exchanges information succinctly, truthfully, and ethically while addressing issues directly and tactfully in pursuit of mutual interest and benefit.
Develops and delivers technical, high quality and directed digital collateral, product prospectus, presentations, and business correspondence in support of the overall sales process.
Independently coordinates and executes product knowledge training sessions with internal and external customers, as appropriate, utilizing supplier representatives.
Leverages all available technology on a daily basis for productivity and effective lead generation, account maintenance, sales and expense tracking, forecasting, account reviews, customer contact, presentations, etc.
Works collaboratively with internal support resources to develop teamwork through cooperation, trust, and mutual respect.
Attends and presents business unit products and services at industry conventions and trade shows.
Maintains extensive product knowledge in all product lines and service offerings.
Adheres to and enforces all company policies, pricing, and operational procedures with special attention to the professional image of the company.
Performs other related duties as required, requested, or assigned.
EDUCATION:
Bachelor's Degree in Business, Sales, or Construction Management and 2-3 years of construction or industry experience OR Minimum High School Diploma or GED with 5 years of construction or industry experience.
EXPERIENCE:
Two to four years of related experience and/or training. Construction knowledge (i.e., waterproofing, air barriers, framing, modular, etc.). Expansion joint experience is preferred. Assembly line-related product segments. Basic knowledge of product chemistries.
OTHER SKILLS AND ABILITIES:
Ability to travelwithin assigned territory.
Must be well organizedand self-motivated, with outstandingwritten and verbalcommunication skills. Proficient with Microsoft Office Suite (Word, Excel, PowerPoint). Salesforce.com or other CRM software experience preferred. Possess a professional curiosity to figure out how things work or are put together. Ability to retain knowledge and training. Proven ability to understand, use, and manage your own emotions in positive ways to relieve stress, communicate effectively, empathize with others, overcome challenges, and diffuse conflict.
Demonstrates self-awareness and emotional self-control through adaptability, achievement orientation, and a positive outlook.
Accepts and utilizes feedback effectively.
Reads an audience and adjusts style and approach accordingly.
Excellent written and verbal communication skills. Strong presentation skills. Excellent interpersonal and organizational skills. Ability to build relationships and deliver exceptional customer service.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, kneel, talk, hear, and lift up to 25 lbs.
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally starts at $85K and goes up based on experience plus incentive compensation.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran statusApply for this ad Online! ....Read more...
Type: Permanent Location: Chicago, Illinois
Posted: 2024-05-15 15:13:13
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America
GENERAL PURPOSE OF THE JOB: Ensures that the assigned revenue, margin and product mix objectives, within the corporate business framework, are met or exceeded.
This is to be accomplished by securing, developing, and managing key architects, designers, general contractors, distributors, subcontractors, and end-user accounts.
This position will also own and manage all related performance and service metrics for the assigned accounts for New York and Pennsylvania.
This position is in the Tremco CSW Business Unit for New Commercial Construction
Tremco Sealants manufactures sealants, air barriers, waterproofing membranes, traffic coatings, glazing accessories and more for new construction and restoration.
Our products can be seen on structures from parking garages and mixed-use buildings to single-family homes and high-rises, and are also used in the modular, residential window and door, industrial and manufacturing markets.
ESSENTIAL DUTIES AND RESPONSIBILITIES: Achieves or exceeds assigned sales goals and expectations.
Works primarily with existing accounts, while seeking and developing new account opportunities to influence and increase use of Tremco CPG products in assigned territory.
Manages assigned accounts to establish business development opportunities through account penetration, analysis, partnership with key decision makers, and strategic initiatives.
Drives product specifications and project opportunities throughout assigned territory.
Leverages industry knowledge, marketplace dynamics and key relationships both internally and externally to develop trusted partnerships and advisory relationships with customers with a focus on problem identification, exploration and resolution.
Annually prepares and delivers strategic business/territory plans for each customer with monthly forecasts.
Consistently and efficiently follows the standard sales process to identify prospects and decision makers, gain customer commitment, predict sales probability, and effectively close deals.
Manages day-to-day contact, exchanges information succinctly, truthfully and ethically while addressing issues directly and tactfully in pursuit of mutual interest and benefit.
Develops and delivers technical, high quality and directed digital collateral, product prospectus, presentations, and business correspondence in support of the overall sales process.
Collaborates with senior staff to coordinate and execute product knowledge training sessions with internal and external customers, as appropriate, utilizing supplier representatives.
Leverages all available technology on a daily basis for productivity and effective lead generation, account maintenance, sales and expense tracking, forecasting, account reviews, customer contact, presentations, etc.
Works collaboratively with internal support resources to develop teamwork through cooperation, trust and mutual respect.
Attends and presents business unit products and services at industry conventions and trade shows.
Maintains extensive product knowledge in all product lines and service offerings.
Adheres to and enforces all company policies, pricing, and operational procedures with special attention to the professional image of the company.
Performs other related duties as required, requested or assigned.
EDUCATION
Bachelor's Degree in Business, Sales, Construction Management and 2-3 years of construction or industry experience OR Minimum High School Diploma or GED with 5 years of construction or industry experience
EXPERIENCE
Two to four years related experience and/or training Construction knowledge (i.e., waterproofing, air barriers, framing, modular, etc.) Insulated Concrete Forms ICF experience preferred. Assembly line related product segments Basic knowledge of product chemistries
OTHER SKILLS AND ABILITIES:
Ability to travel extensivelywithin assigned territory.
Must be well organized,self-motivated, with outstandingwritten and verbalcommunication skills Proficient with Microsoft Office Suite (Word, Excel, PowerPoint) Salesforce.com or other CRM software experience preferred Possess a professional curiosity to figure out how things work or are put together Ability to retain knowledge and training Proven ability to understand, use, and manage your own emotions in positive ways to relieve stress, communicate effectively, empathize with others, overcome challenges and diffuse conflict.
Demonstrates self-awareness and emotional self-control through adaptability, achievement orientation, and a positive outlook.
Accepts and utilizes feedback effectively.
Reads an audience and adjust style and approach accordingly.
Excellent written and verbal communication skills Strong presentations skills Excellent interpersonal and organizational skills Ability to build relationships and deliver exceptional customer service.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, kneel, talk, hear, and lift up to 25 lbs.
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally starts at $85K and goes up based on experience.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran statusApply for this ad Online! ....Read more...
Type: Permanent Location: New York, New York
Posted: 2024-05-15 15:13:10
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
As a member of the fabrication team, the Production Assembler performs assigned tasks that include, but are not limited to, producing architectural shapes, Exterior Insulation and Finish System (EIFS) wall components, and exterior panel systems.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Follows the daily production schedule set by the Production Supervisor. Reads fabrication drawings and tape measurements to prepare materials for assembly. Uses hand power tools to trim corners and fold panel returns. Pre-drills aluminum parts as required. Applies silicone sealant to aluminum extrusions. Attaches aluminum parts using set screws. Assists in building custom crates based on project specifications. Prepares and organizes parts for shipment. Assists with shipping and receiving. Follows all safety requirements. Cleans equipment after use and assists the team in keeping production space clean and organized. Assists with monthly inventory counts.
EDUCATION:
No formal educational requirement. High School Diploma or GED equivalent preferred.
EXPERIENCE:
No prior experience or training. Previous work in a construction, manufacturing, or similar environment preferred. Previous work in the aluminum panel or window industry is preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment, and moral courage. Demonstrates accepted ethical and professional business behavior. Executes ISO authority and responsibility.
Completes and maintains all required training.
Reports suspected violations including those of a business associate. Observes all safety procedures, reports potentially unsafe conditions, and uses and maintains equipment and materials properly.
BENEFITS AND COMPENSATION:
The hourly rate for applicants in this position generally ranges between $15.85 and $18.98.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Carrollton, Texas
Posted: 2024-05-15 15:12:58
-
Backend Developer
Location: Lowestoft, Suffolk
Salary: Minimum £28k + Excellent Benefits
Full-Time, 5 days per week, 37.5 Hours
The Client:
Our client is a worldwide marine consultancy leader, offering advisory and membership intelligence services.
They provide extensive market insights using proprietary tools and a dedicated team of experts.
The Role:
As a Backend Developer, you will play a pivotal role in researching, designing, and developing UI interfaces, programming web and in-house software applications for both internal and external use, and providing essential internal IT support.
Responsibilities:
* Develop fully functional programs with clean, testable code.
* Craft User Interfaces and web layouts using HTML / CSS best practices.
* Create and maintain customer dashboards, including graphs and charts.
* Enhance and repair existing programs.
* Conduct regular tests and debugging for optimal program efficiency.
* Prepare technical documentation for user support.
* Propose new features to enhance navigation and functionality.
* Cooperate with internal teams to define system requirements.
* Integrate back-end data and adhere to security principles.
* Stay updated on the latest industry developments.
Requirements:
* At least 2 years of experience working as a Backend Developer or in a similar role.
* Previously worked as a Web programmer or developer.
* Experience with various programming languages and techniques, including C#.NET, jQuery, JSON, AJAX, API, Python, T-SQL, etc.
* Understanding of MS SQL databases and HTML / CSS / BOOSTRAP.
* Knowledge of Object-Oriented Programming and web application development.
* Possess Project management skills.
* Right to work in the UK.
Benefits:
* Attractive bonus scheme.
* Health and dental care plans.
* Life insurance.
* Pension plan.
Apply now to seize this great opportunity and join a dynamic team.
Important Information: We endeavour to process your personal data in a fair and transparent manner.
In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone, or text message.
For more information see our Privacy Policy on our website.
It is important you are aware of your individual rights and the provisions the company has put in place to protect your data.
If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
Keywords: Web Developer, .NET Developer, Software Developer, Python, Full Stack, Developer, .Net, C#, Backend
....Read more...
Type: Permanent Location: Lowestoft, England
Start:
Duration:
Salary / Rate: £28000 Per Annum
Posted: 2024-05-15 12:06:59
-
Working permanent day shifts with an early finish on Fridays, regular overtime available paid at 1.5, 33 days holiday and the opportunity to work in a low volume machine shop predominantly supplying the Nuclear and Oil & Gas markets.
These are just a few perks that the CNC Miller will enjoy whilst working with this sub-contract precision engineer.This medium sized precision engineering organisation employs approximately 50 people at their West Yorkshire facility.
Primarily producing components for use in the Oil & Gas and Nuclear industries, you can expect to work on intricate and complex parts.
Because of continued growth and a healthy order book, the company are now looking to recruit a skilled CNC Miller on a permanent basis.Based in Halifax, the successful candidate will easily be able to commute from Oldham, Rochdale, Huddersfield, Bradford, Wakefield and Leeds on public transport or using a personal vehicle.Key responsibilities of the CNC Miller will include:
Creating bespoke programmes as well as editing existing programmes using Heidenhain controls
Setting and operating a number of machining centres including Doosan and Hardinge (all Heidenhain controlled)
Advising on possible means of process improvement within the machine shop and other areas of the company
For the CNC Miller role, we are keen to receive applications from individuals who possess:
Ideally a recognised Apprenticeship within Mechanical Engineering, Machining or similar (NVQ Level 3 or higher) - this is not essential
Worked as a CNC Miller, Machinist, Programmer, Engineer or Technician previously within a precision engineering or machine shop environment
The ability of independently programming using ISO or conversational controls
Working Hours of the CNC Miller: 38 Hours per week, spread across a regular day shift
Monday to Thursday - 08:00 to 16:30
Friday - 08:00 to 14:30
In return the CNC Miller will receive:
Renumeration: Up to £36,556.00 per annum (£18.50 per hour)
Overtime: Regularly available and paid at 1.5 - usually 6+ hours available midweek and on Saturday AM
Holiday Entitlement: 33 Days - broken down by hours (254 per annum including public holidays)
Company Pension Scheme (enrolled after 3 months) - Employer Contribution: 3% / Employee Contribution: 5%
To apply for this vacancy, please click “Apply Now” and attach a copy of your CV.
Alternatively, please contact Callum Good at E3 Recruitment for more information. ....Read more...
Type: Permanent Location: Brighouse, England
Start: ASAP
Salary / Rate: £33592.00 - £36556.00 per annum + 33 Hols + 8% Pension + Overtime
Posted: 2024-05-15 10:40:28
-
Position: Service Advisor
Location: Aylesbury
Salary: £26,000 - £30,000 per annum
About Us:
My client is a leading main dealership in Aylesbury who are seeking an experienced and enthusiastic Service Advisor to join their service department.
Key Responsibilities:
Welcome customers warmly and assess their service needs with professionalism and courtesy.
Schedule service appointments efficiently, managing workload effectively to ensure customer satisfaction.
Consult with customers to understand their vehicle's requirements, providing accurate estimates and advice.
Liaise between customers and service technicians, ensuring clear communication and timely updates.
Maintain accurate records of service transactions and customer interactions for reference and compliance.
Requirements:
Previous experience in a service advisor role within the automotive industry is desirable.
Exceptional communication and interpersonal skills, with a customer-focused approach.
Strong organizational abilities, with meticulous attention to detail.
Proficiency in computer systems and software, including dealership management tools.
Ability to thrive in a fast-paced environment, managing multiple tasks with ease.
Positive attitude, team player mentality, and a passion for delivering outstanding customer service.
Benefits:
Competitive salary with the potential for performance-based incentives.
Ongoing training and development opportunities to support your career growth.
Employee discounts on vehicle purchases, servicing, and parts.
Collaborative and supportive work environment, fostering diversity and teamwork.
Opportunity to work with leading automotive brands and cutting-edge technology.
Hammond Recruitment Group is acting as an Employment Agency in relation to this vacancy. ....Read more...
Type: Permanent Location: Aylesbury, England
Salary / Rate: £26000 - £30000 per annum
Posted: 2024-05-15 09:20:15
-
, Logistics / Scheduling / Service Administrator, Up to £26,500 per annum , Initially a 12 month temporary role, Based full-time on-site at their offices in Farnborough
We have an opportunity for an experienced Administrator to work for a Global Technology prover with offices based in Farnborough.
This role is an initial 12 month temporary contract starting ASAP working full-time on-site Monday - Friday 8:30am - 5pm - there is parking available on-site and you MUST be a driver with your own car as the business is based on an industrial park which you can not get to by public transport.
The hours stated above ARE flexible - if you need to do the school drop off for example and needed to start work at 10am they are absolutely fine with this.
In the Logistics / Scheduling / Service Administration role, you will be responsible for monitoring the flow of work and for the transfer of goods from one place to another.
Main duties will include:, Checking new project requests have all the relevant paperwork and associated supplier quotes logged in Teams folders.
Liaising with sales for any missing documentation, Logging all POs received from purchasing on Excel master sheet, Updating delivery dates from suppliers against orders and keeping project engineers updated, as necessary, Chasing internal and external suppliers as needed to get parts into the depot, Requesting project parts to be delivered from remote depot to the local hub , Updating system records on all movements and requests, Keeping planned invoice dates up to date on the internal systems , Assisting project engineers as required on all enquiries/queries connected to their projects, General duties as needed by the project team to assist the smooth running of the project rollouts, Maintaining a clear and open line of communication is crucial in this position
Key skills and experience required:, Previous experience working within an administration position from a Service Industry, The perfect candidate will have previous experience working within Logistics, Scheduling, exports or imports but open to any industry if you have administration experience and strong customer service , Strong customer service and communication skills both verbal and written , Excellent time management and attention to detail , A team player who is able to multi-task , Excellent computer skills, including Microsoft Excel
....Read more...
Type: Contract Location: Farnborough, England
Start: ASAP
Duration: 12 months
Salary / Rate: £25000 - £26500 per annum
Posted: 2024-05-14 23:35:03
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: Accountable for all daily operations of the plant from production and manufacturing to ensuring policies, procedures and safety guidelines are followed.
To enforce and develop processes that will maximize safety, quality, and productivity.
TREMCO'S EXPECTATIONS FOR ALL LEADERS:
Embodies the company's core values of transparency, trust, and respect by demonstrating integrity, commitment, responsible entrepreneurship, and moral courage.
Applies the company's policies and adheres to processes to ensure compliance and organizational best practices.
Demonstrates a commitment to diversity, equity, and inclusion in all areas of responsibility such as hiring and promotion decisions.
Effectively and efficiently onboards new employees.
Conducts annual performance evaluations and provides ongoing performance feedback, maintaining clear and timely documentation.
Coaches and manages employees using the company's philosophy and tools to ensure talent is developed and retained.
Constructs succession plans to ensure sustainability and continuity of area of responsibility.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Accountable for plant operations including oversight of supervisors and administrative staff.
Plant areas may include: Maintenance, production, shipping, and quality control.
Understand and optimize use of budget, remaining accountable to the plant's financial performance.
Responsible for annual budgeting and quarterly forecasting processes.
Develops strategies that ensure effective achievement of Lean Manufacturing objectives.
Conducts annual performance evaluations and provides ongoing performance feedback, maintaining clear and timely documentation.
Works with senior management to ensure manufacturing goals are consistent with strategic direction.
Ensure order processing matters are filled to their entirety.
Fulfill compliance reporting and plan yearly maintenance, inspections, audits, and projects.
Optimize inventory and organization, including oversight of parts, supplies and raw materials.
Demonstrates acommitment to diversity in hiring and promotion decisions.
Analyze maintenance status reports and assist with machine troubleshooting, ensuring that all machines meet safety operating standards.
Oversee the plant Health & Safety Program.
Ensure safety standards are understood and met.
Recommend and work in conjunction with Director on plant capital expenditures.
Review and implement new procedures and processes.
Coordinate with Quality Control & R&D on the development of new products and testing protocols.
Arrange outside services and contractors as needed.
Accountable to ensuring appropriate reporting of: Incidents, production concerns, customer inquiries, etc.
Assist with internal troubleshooting/investigating customer complaints and inquiries.
Ensures plant operates within compliance of all legislative, regulatory, safety, and company mandates.
EDUCATION REQUIREMENT:
Bachelors degree in Engineering, Business, or related field
EXPERIENCE REQUIREMENT: A minimum of 3 years' supervisory experience required The following is preferred: Previous experience in a Plant Manager role Experience with shift operations
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
SAP (Preferred) Lean Six Sigma (Required) Ability to assess a situation and mediate the issue to ensure a constructive outcome.(Required) Knowledge of business and management principles involved in strategic planning, resource allocation, leadership technique, production methods, and coordination of people and resources.
(Required) Knowledge of safety, environmental, and workplace regulations.
(Preferred) Knowledge of principles and procedures for personnel recruitment, selection, training, compensation and benefits, labor relations and negotiation skills.
(Preferred) Computer Literacy: Ability to apply excel, word, and SAP applications to daily job responsibilities.
(Required)
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The Company offers a competitive salary based on education and experience.
We provide access to a variety of employee benefits including but not limited to health (medical, dental, and vision) insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.
Tremco CPG Inc.
is an equal opportunity employer.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2024-05-14 23:09:57
-
JOB DESCRIPTION
I&C engineer and supported by I&C technician team.
Responsible for the design and review of all I&C equipment and instruments for the Plant. Explore solutions to production problems or improve efficiency with maintenance and operators.
Run experiments and tests to aid in the development of improved manufacturing procedures and processes, and become familiar with a variety of concepts, practices, and procedures.
Work and coordinate activities with the other engineering disciplines, Process, Project and Environmental. Prepare, review and/or approve of instrument specification data sheets and submit purchase requisitions for approval.
Prepare equipment lists, instrument index, I/O lists.
Review process flow diagrams and piping and instrument diagrams (P&IDs). Meet with plant technical staff to discuss technical information and features. Ensure drawings, specifications, reports, and analyses meet scope, schedule, cost, and quality requirements. Participate in failure mode and effect analysis (FMEA) and Process Hazard analysis (PHA) to consider equipment, personnel, and environmental safety.
Knowledge of capital approval process and project justification required. Be involved in the design and development of equipment and work procedures.
Be responsible for preparing, maintaining, and updating process hazard analysis.
Ensures necessary records are maintained and prepared according to established guidelines.
Takes responsibility for I&C Engineering Change Management system.
Coordinate and approve all sample submissions of new products and engineering changes through the Product Development Program.
Assists in identifying the root causes of a problem and instituting corrective action such as changes to batch sheets, generation of Engineering Change Requests, changes in workstations, changes to inspection analyses and changes to process procedures.
Provide recommendations to improve procedures that apply to quality and operations functions.
Be responsible for the design and implementation of policies and procedures to ensure that quality standards are met during production.
Review quality trends based on quality data system information and interaction with production personnel and participate in the generation and implementation of defect-reduction programs.
Investigate quality improvement opportunities and complaints with Director, Plant Manager and Research and Development.
Prepare for and represent the company during all ISO and related audits.
Review all design drawings and changes, process procedures, test procedures, procurement documents, and inspection analyses to ensure that the divisions and customers quality requirements are met on assigned products, programs, areas, and functions. Provide support to maintenance and operation group including visual aids and inspection analyses.
EDUCATION AND/OR EXPERIENCE:
B.S.
degree in Electrical or Computer Engineering.
Preferred, 2+ years working in a Manufacturing environment, and/or training; or equivalent combination of education and experience. Electrical Schematic and panel layout design using CAD (preferably AutoCAD Electrical) experience. Experience in the design of programmable logic controllers (PLC) or distributed control system (DCS) based controls systems.
Expertise in National Electrical Code requirements in industrial facilities and hazardous locations.
Proven understanding of integrating instrumentation with data acquisition hardware.
Proficiency with electrical diagnostic equipment. Familiar with industrial sensors and actuators; pressure, temperature, accelerometers, motor controllers, flow meters, relays, strain gauges, valves, and pumps.
Strong technical and non-technical writing and verbal skills Able to work in the United States without sponsorship. Ability to read, analyze, and interpret complex documents and/or scientific and technical journals, financial reports, and legal documents.
Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community.
PHYSICAL DEMANDS
This job requires daily use of hands to finger, handle or feel, and daily talking and/or hearing.
This job requires frequent walking, standing, sitting, reaching with hands and arms, and stooping, kneeling, crouching, or crawling.
This job requires occasional climbing or balancing and tasking or smelling.
This job requires frequent lifting of up to 10 lbs.
This job has the following special vision requirements: Close vision (clear vision at 20 inches or less) Distance vision (clear vision at 20 feet or more) Color vision (ability to identify and distinguish colors) Peripheral vision (ability to observe an area that can be seen up and down or to the left and right while eyes are fixed on a given point) Depth perception (three-dimensional vision, ability to judge distances and spatial relationships)
WORK ENVIRONMENT
This job requires exposure to the following environmental conditions: Daily exposure to fumes or airborne particles and toxic or caustic chemicals.
Frequent exposure to working near moving mechanical parts.
Occasional exposure to wet or humid conditions, working in high, precarious places, outdoor weather conditions, and risk of electrical shock.
The noise level for this job is loud.
This job is located at a Chemical Plant.
Evaluate hazardous processes and chemicals such as caustic, ammonia, and solvent.
Evaluating storage tank instrumentation (high places), Assisting maintenance in troubleshooting, replacing, cleaning, and redesigning equipment
Wages: From $88K to $120K per year.
This position is 15% bonus eligible.
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to: medical, dental, vision, life insurance, disability, vacation, 14 Paid Holidays, parental leave, 100% Education reimbursement, 401(k), employee stock purchase plan, and pension.
Apply for this ad Online! ....Read more...
Type: Permanent Location: Corsicana, Texas
Posted: 2024-05-14 23:07:33
-
Project Account Manager - York Salary - £35,000 We are recruiting for a Project Account Manager to work Monday-Friday, 8:00-16:30, with a generous holiday package of 33 days a year with no weekend working.This Project Account Manager role also comes with private medical health care with BUPA and would be working on a full time, permanent contract with the business.This company offers additional training and support to help with personal development and progression.Project Account Manager Duties -
Provision of guidance and advice to customers on the purchase and installation of product.
To produce accurate Sales Tool CAD drawings using in house Sales Tool software from Sales sketches or drawings using a library of standard parts.
(training given) to design and document improvements in product.
Processing of direct sales enquiries and the submission of quotations in response
Processing of sales orders ensuring technical accuracy received both directly from customers and those generated by Area Sales Managers and Key Account Mangers for supply and installation contracts
Liaison with customers throughout the contract / order process.
Liaison with Technical Team based at Head office In Wooburn Green via physical, phone and Teams meetings
Liaison with Purchasing Department regarding the availability of stock
Liaison with Operations Director regarding the scheduling of installation orders.
Assisting Sales team in the generation of new sales accounts by means of prospecting.
Ensure timely delivery of material stock relating to specific orders is on site, through liaison with the procurement function, and delivered to the production facility in line with the schedule.
The Ideal Candidate for the Project Account Manager role -
A highly motivated individual with appropriate qualifications or experience and current automotive knowledge.
Previous experience in a technical account management role and/or Previous mechanical/engineering experience
To maintain accurate records of Electrical specifications.
A self-motivated person with a professional manner and methodical work ethic.
Excellent inter-personal and communication skills.
Knowledge of CAD or other drawing packages an advantage.
Current driving license
What's in return for the Project Account Manager role-
Basic salary of circa £35,000
33 days annual leave per year
Full time, permanent role
Private healthcare
Training provided
For further information, or to apply for this Project Account Manager role, please contact Grace Hudson-Morgan at E3 Recruitment.
....Read more...
Type: Permanent Location: York, England
Start: ASAP
Salary / Rate: Up to £35000.00 per annum
Posted: 2024-05-14 18:00:16
-
YOU MUST HAVE THE RIGHT TO WORK IN THE UK
YOU MUST HAVE EXPERIENCE WORKING WITH CHILDREN WITH AUTISM, CHALLENGING BEHAVIOURS OR ADHD
Are you a passionate and engaging Teaching Assistant? Do you want to make a difference in children's lives?
About the role:
You will be providing support to children aged 5-11years in a school setting.
You must have children's experience with autism, challenging behaviours, or ADHD.
You will be required to support with day-to-day tasks, activities, meal preparation, music classes, arts & crafts.
About you:
A successful candidate will have experience working with children and young people with emotional Behaviour Disorders, and/or disabilities and challenging behaviours.
An NVQ Level 3 Children's is preffered.
PAYE payments starting from £11.50 + holiday pay
Umbrella starting from £14.57
Requirements for you as a Teaching Assistant:
Experience supporting children with additional needs
Self-motivated individual with clear communication skills
Enhanced Child and Adults DBS
Shift Times:
08:00 - 15:00 Monday-Friday
Term Time only
Benefits for you as a teaching assistant:
Holiday Pay 12.07%
Weekly Pay
Pension
E-learning training offered via Charles Hunter Associates
A Dedicated Consultant to you
If you think you'd fit the role of the Teaching Assistant, then please contact me!
Milly Harrison - Recruitment Consultant
mharrison@charecruitment.com
0118 948 5555
#IND-CH-SUPWK-TMP24
....Read more...
Type: Contract Location: Liverpool, England
Start: ASAP
Duration: on going
Salary / Rate: £11.50 - £14.57 per hour + weekly pay
Posted: 2024-05-14 17:35:19
-
Electrical Assembler Opportunity at a Growing Cambridge Aerospace Company
Do you have a passion for precision and a willingness to learn?
We are looking for a motivated and detail-oriented Electrical Assembler to join our growing team in Cambridge.
This is an excellent opportunity to work for a local, up-and-coming company in a modern and secure work environment, with a clear path for progression.
Electrical Assembler responsibilities:
- Manufacture and assemble bespoke electrical components for the aerospace industry.
- Conduct thorough inspections and testing of assembled parts.
- Utilise various Bonding techniques
- Perform crimping tasks.
- Work effectively with hand and power tools.
- Follow engineering drawings and technical documents to ensure accuracy.
Electrical Assembler Experience:
- Previous experience in Sub-Assembly and Final Assembly
- Experience in a production environment
- Ability to understand and interpret basic technical drawings and work instructions.
- A positive attitude and a willingness to learn are essential
Salary - £30,000 - £33,000
Half day Friday\'s
If you\'re looking for a rewarding career in a growing company with a focus on security, progression, and a great work environment, we want to hear from you! Please contact liam.nother@holtengineering.co.uk if you have any questions. ....Read more...
Type: Permanent Location: Cambridge,England
Start: 14/05/2024
Salary / Rate: £30000 - £32000 per annum
Posted: 2024-05-14 17:26:03
-
MET Technician / Strip Fitter Technician Vacancy:
- Salary up to £18 p/h + Bonus
- Permanent Mon - Fri 42.5 hours
- 22 days holiday + Bank Holidays
Our client, a busy Bodyshop/Accident Repair Centre in the Kettering area, is looking to expand their team with the addition of an experienced MET Technician / Strip Fitter.
Key MET Technician / Strip Fitter Roles and Responsibilities:
- Removing and refitting parts to ensure body repairs are to a very high standard
- Dismantle and rebuild vehicles as instructed
- To report unseen damage, absent from estimate as soon as its identified
- Have a good level of efficiency and attention to detail
- Be able to work in a team and as an individual
Minimum Requirements as a MET Technician / Strip Fitter:
- Time served and/or qualified to city & guilds or NVQ level
- Have Previous experience as an MET Technician
- ATA is advantageous
If you want to hear more about this MET Technician / Strip Fitter position, please send us your CV by clicking 'apply now' or contact Piam Pishgoo on 01202 552915 / piam@holtautomotive.co.uk to discuss further.
MET Technician / Strip Fitter - up to £18 p/h Bodyshop Kettering
MET Technician / Strip Fitter / Bodyshop Technician / Mechanical Electrical Trim Technician ....Read more...
Type: Permanent Location: Kettering,England
Start: 14/05/2024
Salary / Rate: £18 per hour, Benefits: + Bonus
Posted: 2024-05-14 17:02:03
-
Panel Beater, Panel Technician, Bodyshop Technician:
- Realistic Earning potential of £47,000 per annum
- Hours: 42.5 hour week Mon - Fri
- 22 days holiday plus bank holidays, Discounts for various places, site bonus, Pension plus much more
- Permanent Vacancy
I am looking for an experienced Panel Beater to join a leading Accident Repair Centre in the Darlington area.
Key Panel Beater Roles and Responsibilities:
- Operation of body alignment jigs
- Panel straightening and filling.
- Replacement of panels
- Welding and bonding of vehicle structure
- Removing and replacing complete body shell
- Keep an accurate list of parts required.
Minimum requirements as a Panel Beater:
- Time served and/or qualified to city & guilds or NVQ level.
- ATA is advantageous but not essential.
- As a Panel Beater, you should be efficient, and all work must be completed to the required standard
If you want to hear more about the Panel Beater role, please send us your CV by clicking apply now or by contacting Richard on 07590309374 / richard@holtautomotive.co.uk to discuss further.
Panel Beater - £47,000 Darlington Bodyshop
Panel Beater, Panel Technician, Bodyshop Manager, Motor Trade, Automotive, Accident Repair centre ....Read more...
Type: Permanent Location: Darlington,England
Start: 14/05/2024
Salary / Rate: £47000 per annum
Posted: 2024-05-14 16:45:03
