-
GRP and Composite Laminators.
Working in a team environment you will work on a range of products, you will need to read and understand lay-up drawings and use your laminating skills to carry out the required workload to the lay-up specification.
You will also need to utilise your skills to query any error or change that you may observe on any particular job.
You may be required to interchange between Composites and GRP sites due to workloads in the relevant departments.
Duties & Responsibilities of a Laminator
· Laminating and tooling across a broad range of products performing a range of laminating processes which may include wet-lay, infusion, vac-bagging or pre-preg.
· Read and understand lay-up specifications.
· Checking information on drawings is clear.
· Checking route card instructions are correct.
· Following processes and ensuring the highest quality is maintained at all times
· Use of hand tools.
· Use of a wide range of fabrics, CSM and cloths in dry and pre-preg formats.
· Identify laminating defects.
· Record daily time spent on jobs on weekly timesheet.
· Correct use of PPE.
· Work with QA team to ensure that parts are being manufactured effectively and according to drawings and lay up books to ISO standards.
· Help develop processes to improve quality and efficiency.
Key Skills & Qualifications:
· 2+ years experience gained within the Marine, Aerospace or other quality driven industry.
· Familiar with pre-preg autoclave processes and materials such as carbon and glass.
· Excellent attention to detail and accuracy levels.
· Ability to follow procedures and work instructions / manuals.
· Good verbal communication and listening skills.
· Used to working in a fast-moving environment.
· Ability to read engineering drawings would be an advantage.
If this sounds like the role for you please apply or call Ian at Holt Engineering on 07734406996 ....Read more...
Type: Permanent Location: Poole,England
Start: 19/04/2024
Salary / Rate: £15.68 - £16.23 per hour
Posted: 2024-04-19 11:56:03
-
Nightshift CMM Inspector
An opportunity has opened up for a CMM Inspector to join a leading manufacturer of precision machined components for the Oil and Gas, Telecommunications, Aerospace and Defence, Land and Sea Systems, Nuclear and Marine industries and emerging markets.
The successful CMM Inspector will have a proven background within inspection with excellent communication and to strive for maintaining high-quality standards of acceptance.
Essential skills needed for CMM Inspector
- Must have right to live and work in the UK
*Essential
*
- A minimum of 3+ years experience within a similar role
- In depth knowledge of geometric dimensioning and tolerancing
- Confident with alternate controls software to create programs for inspection
- Working knowledge of Mitutoyo CMMS using COSMOS Platform
*Desirable
*
- PC-DMIS platform
*Desirable
*
Benefits for CMM Inspector
- Excellent pension and life assurance scheme
- Free on-site car parking
- Career and development opportunities
- 34 days holiday (incl.
bank holidays)
- Health cash plan scheme
- Health & wellbeing services
- Employee discount scheme
- Employee Assistance Programme
- Cycle to Work Scheme
- Profit sharing scheme
- Reward and recognition
Hours for CMM Inspector
- Monday to Wednesday 5pm to 3.30am
- Thursday 5pm to 2.30am
If you are interested in this CMM Inspector opportunity, please contact James on 07485 390941 or email James.Ferrier@holtengineering.co.uk ....Read more...
Type: Permanent Location: New Milton,England
Start: 19/04/2024
Salary / Rate: £40000 - £55000 per annum
Posted: 2024-04-19 11:52:04
-
Manual Inspector
An opportunity has opened up for a Manual Inspector to join a leading manufacturer of precision machined components for the Oil and Gas, Telecommunications, Aerospace and Defence, Land and Sea Systems, Nuclear and Marine industries and emerging markets.
The successful Visual Inspector will have a proven background within inspection with excellent communication and to strive for maintaining high-quality standards of acceptance.
Essential skills needed for Visual Inspector
- Must have right to live and work in the UK
*Essential
*
- Previous experience within a similar role
- Knowledge and use of manual measuring equipment
- Understanding of drawing tolerances and specifications
Benefits for Visual Inspector
- Excellent pension and life assurance scheme
- Free on-site car parking
- Career and development opportunities
- 34 days holiday (incl.
bank holidays)
- Health cash plan scheme
- Health & wellbeing services
- Employee discount scheme
- Employee Assistance Programme
- Cycle to Work Scheme
- Profit sharing scheme
- Reward and recognition
Hours for Visual Inspector
Monday to Thursday 6.45am to 3.30pm
Friday 7am to 1pm
If you are interested in this Manual Inspector opportunity, please contact James on 07485 390941 or email James.Ferrier@holtengineering.co.uk ....Read more...
Type: Permanent Location: New Milton,England
Start: 19/04/2024
Salary / Rate: £30000 - £35000 per annum
Posted: 2024-04-19 11:31:09
-
Long-term Contract Firmware Engineer - Embedded C to work with an established and highly respected developer of high integrity electronics based in Northamptonshire
This role has an indicative OUTSIDE IR35 determination therefore we can accept candidates who would like to operate through their own PSC.
With a history spanning many years, our customer is the market leader in their field, supporting a range of customers in industries such as aerospace, defence and industrial.
Their products are designed and developed in the UK across multiple sites and sold around the world.
As a result of major project wins and continued investment in their product offering, they are seeking a range of professional Contractors.
You will work with a highly skilled development team tasked with creating a new process and technology to test their products before full customer release.
You will develop embedded software and work in conjunction with electronics engineers and other disciplines to complete the project on time and in budget.
Key Skills Required - Contract Firmware Engineer - Embedded C, Northamptonshire:
- Experience of developing software in embedded C
- Strong experience of working on software to interface with hardware
- Experience of working with data sheets
Any Contractors with experience of bootloader, slimboot or other similar technologies would be of particular interest.
Successful applicants must be able to pass BPSS checks.
For more information or to apply for the Contract Firmware Engineer - Embedded C opportunity in Northamptonshire, please contact Fahad McCann on 01582 878819 / 07961 158790 / FMcCann@redlinegroup.Com quoting reference FMC1004 ....Read more...
Type: Contract Location: Northamptonshire, England
Start: ASAP
Duration: 6 Months +
Salary / Rate: £50 - £60 per hour
Posted: 2024-04-19 10:06:34
-
Long-term Contract Embedded Software Engineer - Linux Yocto opportunity to work with an established and highly respected developer of high integrity electronics based in Edinburgh
This role has an indicative OUTSIDE IR35 determination therefore we can accept candidates who would like to operate through their own PSC.
With a history spanning many years, our customer is the market leader in their field, supporting a range of customers in industries such as aerospace, defence and industrial.
Their products are designed and developed in the UK across multiple sites and sold around the world.
As a result of major project wins and continued investment in their product offering, they are seeking a range of professional Contractors.
You will work with a highly skilled development team to complete a project for the next generation of one of their key product lines.
You will develop embedded software and work in conjunction with electronics engineers and other disciplines to complete the project on time and in budget.
Key Skills Required - Contract Embedded Software Engineer - Linux Yocto, Edinburgh
- Proven experience of developing embedded software in C on custom Linux Yocto systems
- Experience of kernel/device driver development
- Experience of developing software for networking/network protocols such as TCP/IP, Ethernet.
Successful applicants must be able to pass BPSS checks.
For more information or to apply for the Contract Embedded Software Engineer - Linux Yocto opportunity in Edinburgh, please contact Shammi Choudhury on 01582 878818 / SChoudhury@redlinegroup.Com quoting reference SAC1016 ....Read more...
Type: Contract Location: Edinburgh, Scotland
Start: ASAP
Duration: 6 months
Salary / Rate: £50 - £60 per hour
Posted: 2024-04-19 09:45:09
-
Long-term Contract Embedded Software Engineer - Linux Yocto opportunity to work with an established and highly respected developer of high integrity electronics based in Edinburgh
This role has an indicative OUTSIDE IR35 determination therefore we can accept candidates who would like to operate through their own PSC.
With a history spanning many years, our customer is the market leader in their field, supporting a range of customers in industries such as aerospace, defence and industrial.
Their products are designed and developed in the UK across multiple sites and sold around the world.
As a result of major project wins and continued investment in their product offering, they are seeking a range of professional Contractors.
You will work with a highly skilled development team to complete a project for the next generation of one of their key product lines.
You will develop embedded software and work in conjunction with electronics engineers and other disciplines to complete the project on time and in budget.
Key Skills Required - Contract Embedded Software Engineer - Linux Yocto, Edinburgh
- Proven experience of developing embedded software in C on custom Linux Yocto systems
- Experience of kernel/device driver development
- Experience of developing software for networking/network protocols such as TCP/IP, Ethernet.
Any Contractors with experience of bootloader, slimboot or other similar technologies would be of particular interest.
Successful applicants must be able to pass BPSS checks.
For more information or to apply for the Contract Embedded Software Engineer - Linux Yocto opportunity in Edinburgh, please contact Shammi Choudhury on 01582 878818 / SChoudhury@redlinegroup.Com quoting reference SAC1016 ....Read more...
Type: Contract Location: Edinburgh, Scotland
Start: ASAP
Duration: 6 months
Salary / Rate: £50 - £60 per hour
Posted: 2024-04-19 09:43:41
-
Long-term Contract Embedded Software Engineer - Linux Yocto opportunity to work with an established and highly respected developer of high integrity electronics based in Northamptonshire.
This role has an indicative OUTSIDE IR35 determination therefore we can accept candidates who would like to operate through their own PSC.
With a history spanning many years, our customer is the market leader in their field, supporting a range of customers in industries such as aerospace, defence and industrial.
Their products are designed and developed in the UK across multiple sites and sold around the world.
As a result of major project wins and continued investment in their product offering, they are seeking a range of professional Contractors.
You will work with a highly skilled development team to complete a project for a customer which is an addition to their ever expanding product range.
You will develop embedded software and work in conjunction with electronics engineers and other disciplines to complete the project on time and in budget.
Key Skills Required - Contract Embedded Software Engineer - Linux Yocto, Northamptonshire
- Proven experience of developing embedded software in C on custom Linux Yocto systems
- Experience of kernel/device driver development
- Experience of developing software for networking/network protocols such as TCP/IP, Ethernet.
Any Contractors with experience of position navigation timing (PNT) would be of particular interest.
Successful applicants must be able to pass BPSS checks.
For more information or to apply for the Contract Embedded Software Engineer - Linux Yocto opportunity in Northamptonshire, please contact Shammi Choudhury on 01582 878818 / SChoudhury@redlinegroup.Com quoting reference SAC1015 ....Read more...
Type: Contract Location: Northamptonshire, England
Start: ASAP
Duration: 6 Months +
Salary / Rate: £50 - £60 per hour
Posted: 2024-04-19 09:42:00
-
Technical Project Manager
We want to immediately hire a Project Manager / Technical Project Manager with experience of taking technical projects from conception to production.
You will need experience in NPI, OEM and Tier 1 manufacturing and will ideally have an Electro Mechanical, Electronics or Design background.
As Project Manager for this role, you will ideally come from a technical background and have experience of working in an engineering, manufacturing, electronics, electrical, automotive, aerospace, agricultural vehicle / machinery or Off Highway vehicle or medical equipment sector.
Business & Global Reach:
The business is an established market leader within its field, covering OEM, Retro-Fit / Aftermarket sectors, leading innovation for product design and development for lifesaving products to optimise vehicle safety, operating globally across multiple countries.
Target Experience:
Our ideal candidate will have a very good understanding of Managing NPI Projects within major technical sectors and have the ability to lead / head up multiple projects and build relationships with colleagues and customers.
Ideally located - Kent, Greenwich, Crawley, Biggin Hill, Hornchurch, Upminster, Romford, Brentwood, Laindon, Dagenham, Surrey Quays, Rochester, Basildon, Ilford, Dartford, Gillingham, Bromley, Greenwich, Croydon, Sevenoaks, Orpington, Epsom
Salary - Circa £45k - £65k DOE plus bonus + Car / Allowance + Pension (up to 5%) + Private Medical +Eye Care Vouchers + Employee Assistance Program + 25 days Hols exc BH (Holiday entitlement increases by 1 day every 2 years) + Hybrid working
Key Skills:
Minimum 2 to 3 years NPI Project Management experience.
Must be able to manage projects from cradle to grave.
Have a technical background - Ideally Electronics, Mechanical, Electro Mechanical, Design.
Must understand the production life cycle.
lead engineering teams and be able to liaise and support other departments.
Have an understanding and knowledge of working with and supporting OEM and Tier 1 customers.
Be comfortable working in a fast-paced environment.
Have the skill to build internal and external relationships.
Self-motivated and able to work independently.
Be a confident communicator - written and verbal.
BTEC, HNC / City & Guilds or equivalent in engineering or science discipline.
Solid PC user within key Microsoft applications.
The Next Step:
To express an interest in this role, please call Robert Cox of Glen Callum Associates Ltd for an initial confidential chat on 00 44 (0) 7398 204832 or email with your CV detailing how your experience meets with the above.
Job Ref: 4121RCA - Technical Project Manager ....Read more...
Type: Permanent Location: Ilford, England
Start: 17/05/2024
Salary / Rate: £45000 - £65000 per annum + £45-£65k DOE + Car + Pension + Healthcare
Posted: 2024-04-17 14:41:17
-
TIG Welder
Location: Droitwich, Worcestershire
Salary: £30k - £34k + Excellent Benefits
Job Type: Full-Time, Monday - Friday
The Client:
A renowned firm, our client provides tailored repair and engineering solutions for the global power generation, waste-to-energy, and petrochemical sectors on a global scale.
The Role:
As a TIG welder, you will execute TIG welding on turbine blades, rotors, and other parts using various materials.
Training will be provided to the potential candidates.
Responsibilities:
* Interpret technical drawings and procedures for precise welding.
* Operate TIG welding equipment to achieve optimal performance.
* Inspect welds to ensure compliance with standards.
* Prepare and form welds using hand and air tools.
* Collaborate with the production team to meet deadlines.
* Promote and adhere to safe working practices.
* Travel internationally as needed for project completion.
Requirements:
* Previously worked as a TIG Welder or in a similar role.
* NVQ / City & Guilds in welding & fabrication or equivalent experience.
* TIG welding experience, preferably in the power or aerospace industries.
* Flexibility for international travel.
* Valid UK driving licence.
Benefits:
* Competitive salary
* Pension scheme
* Bonus Scheme
* 25 days plus bank holidays
* Training and progression opportunities
Apply now for this exceptional opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner.
In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message.
For more information see our Privacy Policy on our website.
It is important you are aware of your individual rights and the provisions the company has put in place to protect your data.
If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
Keywords: TIG Welder, TIG Welding, Welding Technician, Welder, Welding, Fabricator, aerospace, power, jobs, Fabrication
....Read more...
Type: Permanent Location: Droitwich, England
Start:
Duration:
Salary / Rate: £30000 - £34000 Per Annum
Posted: 2024-04-17 14:21:21
-
Calibration Technician / Maintenance Engineer (Air & Torque Tools) required for a permanent position in the Chester / Deeside area.
Competitive salary (DoE) + excellent benefits, see below.
The Air Tool Calibration Technician will be working circa 39 hours (Initially Mon - Fri days then likely to move to rotating double days shift pattern i.e.6-2/2-10 with shift allowance paid).
Applications also welcomed from candidates who have recently completed a mechanical engineering apprenticeship or recently qualified or completed relevant engineering / maintenance qualifications, Trainees or Repair / Service Technicians, Mobile Engineer, Hire Service Fitter, Mechanical Fitter, Mechanic or similar trades who have used, maintained or even calibrated air / pneumatic equipment, torque tooling, hand tools or service / hire equipment.
Benefits:
Competitive salary (DoE)
Circa 39 hours/week (Mon - Fri days).
25 days holiday plus bank hols.
Company Pension
Life Assurance
Company sick pay (following a qualifying period)
Company "perks" benefits
Medicash Health plan
Occasional O/T
Primary Purpose of the job: Responsible for undertaking various maintenance activities and calibrations to Customers specification and ISO900 accredited in accordance with Company Procedures, UKAS regulations and recognised specifications.
Maintaining relevant records of work, data and results in a traceable and auditable manner utilizing our customers tooling management systems.
Day to day duties of the successful Air Tool Calibration Technician include:
Safe and effective use, maintenance, calibration and repair of air tools used to build aircraft in in the aerospace industry.
You will be responsible for the preparation and provision of test specifications.
Handling technical enquiries and liaising with clients where necessary.
Receiving and registering any work as necessary.
Completing test schedules & technical reports to effect optimum efficiency of the calibration area.
Maintain relevant records and data.
To follow company H&S guidelines
To be suitable for this Air Tool Calibration Technician role you must have the following experience / characteristics:
Prior experience of using air / pneumatic and torque tooling.
Recent mechanical maintenance / mechanical fitting experience.
Good communication skills.
Good PC literacy.
The ideal Calibration Technician / Maintenance Engineer (Air Tools) will have the following skills / experience:
Completed a relevant mechanical engineering apprenticeship.
Relevant mechanical / maintenance qualification such as C&G / NVQ / BTEC Level 3, HNC, HND etc.
Experience of repairing / maintaining electric / cordless hand tools, service / hire equipment etc.
Recently or currently repairing / maintaining air tools such as Avdel Bottle, Cherrymax Bottle, Huck Puller / Swager, Nut Runner, Pin Gun, Pulse Gun, Torque Screw Driver, Torque Wrench, Torque Wrench Adjustable used to build aircraft in in the aerospace or automotive industry.
Experience of hand vibration testing equipment.
Inspection or Calibration experience.
Aerospace or Automotive experience.
Key words: Air Tools, Calibration, Repair, Maintenance, Airtools, Aircraft Fitter, Mechanical Assembly, Mechanical Fitting, Mechanical Maintenance Engineer, Calibration Technician, Avdel Bottle, Cherrymax Bottle, Huck Puller / Swager, Nut Runner, Pin Gun, Pulse Gun, Pneumatic, Torque Tooling, Torque Screw Driver, Torque Wrench, Torque Wrench Adjustable, Inspection, AS 9100, QA, QC, Aerospace, Automotive, HSS, Ex HM Forces, Chester, Cheshire
Does that sound like you? If so, we'd love to see your CV.
This position could be right for you if you've worked / want to work as any of the following: Mechanical Maintenance Apprentice / Trainee, Calibration Technician, Calibration Engineer, Mobile Engineer, Service Technician, Mechanic, Hire Service Fitter, Repair Technician, Ex Forces, Bench Fitter, Mechanical Fitter
The successful Air Tool Calibration Technician / Maintenance Engineer (Air Tools) will need to demonstrate a degree of flexibility as there will be potential O/T, a possibility of working weekends and occasional travel to other sites.
The successful applicant will need to have a practical approach to work along with the relevant qualifications / experience.
If you are interested in Air Tool Calibration Technician role and have the required experience please click on the apply now button. ....Read more...
Type: Permanent Location: Chester, England
Salary / Rate: £24000 - £32000 per annum + 25+8 days hol, + excellent bens
Posted: 2024-04-17 13:45:52
-
Continuous training and skill development, 8% combined pension scheme and frequent overtime are just a few of the perks that the Production Operative will enjoy whilst working with this impressive engineering service provider.Operating out of a 45,000sqft facility in Leeds, this service provider are part of a globally operating organisation that employs over 4,000 people across the world.
Their Leeds based facility offers specialist services for a variety industries, including Oil & Gas, Aerospace, Medical Devices, Defence and Automotive.This is an excellent opportunity for a Production Operative to move into a permanent role with a business who offer comprehensive training on their processes, procedures and equipment.Based in Leeds, just a few minutes from the M1, the successful Production Operative will easily be able to commute from surrounding towns and cities including Castleford, Pontefract, Wakefield, Bradford, Huddersfield, Dewsbury, Harrogate, Wetherby and Halifax.Key Responsibilities of the Production Operative will include:
Using specialist paint spraying equipment and applying coatings to a variety of components using air powered equipment
Working in-line with critical specifications and requirements, dictated by the customer and industry
Operating as per manufacturing, dispatch and delivery time scales
Accurately completing internal and external documentation
Ensuring that all company H&S policies and SOPs are adhered to at all times
For the Production Operative vacancy, we are keen to receive applications from individuals who possess:
An excellent and positive attitude towards work, training and skill development
Previous experience working in an engineering, manufacturing or industrial environment
Working Hours of the Production Operative: 37 Per week, spread across a day shift pattern:
Monday to Thursday - 08:00 to 16:30
Friday - 08:00 to 13:00
In return, the successful Production Operative will receive:
Starting Salary: £22,010.56 (£11.44 per hour)
Holiday Allowance: 28 Days including public holidays
Pension: 8% Combined contribution (3% Employer / 5% Employee)
Free access to an online portal with various training courses available
Annual salary & merit reviews
Life Assurance
To apply for this position, please click “Apply Now” and attach a copy of your updated CV.
Alternatively, please contact Sam Procter at E3 Recruitment for more information ....Read more...
Type: Permanent Location: Leeds, England
Start: ASAP
Salary / Rate: Up to £22010.5600 per annum + Training + Pension
Posted: 2024-04-17 09:31:30
-
Senior Customer Service Executive
Location: Wokingham,Berkshire
Salary: £25k - £29k + Excellent Benefits
The Client:
Our client is a well-established aerospace parts and components manufacturer, offering a range of additional services such as repair and haulage.
The Role:
As a Senior Customer Service Executive, you will efficiently handle email inquiries, ensuring prompt and effective resolutions for customers, including direct responsibility for key client accounts.
Responsibilities:
* Maintain regular liaison with workshop logistics and various departments to keep customers informed.
* Timely generation and processing of quotes according to departmental targets.
* Prepare and conduct regular status reports and communication for top clients, adapting the frequency as per agreements.
* Serve as a crucial point of contact for customer queries across multiple channels, striving to exceed expectations.
* Collaborating with the supply chain team for necessary parts.
* Coordinate departmental email management, quote generation, and task distribution, especially in team leaders absence.
* Oversee critical customer accounts, ensuring exceptional service levels are maintained.
* Serve as the primary contact for colleagues when the CSM and TL are unavailable.
* Conduct a minimum number of customer visits annually.
* Provide mentorship and support to newer team members, promoting knowledge sharing and collaborative growth.
Requirements:
* Previously worked as a Customer Service Executive or in a similar role.
* Possess 1-2 years of experience in a similar customer service role.
* Capable of overseeing AOGs from start to finish.
* Ability to report customer progress and pinpoint pain areas for resolution.
* Computer skills including Microsoft Office.
* Exceptional attention to detail and numerical accuracy.
* Strong communication and numeracy skills
* Demonstrated ability to prioritise tasks and manage ones workload effectively.
* Self-driven with a keenness to acquire new skills and work independently.
Apply now for this exceptional opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner.
In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message.
For more information see our Privacy Policy on our website.
It is important you are aware of your individual rights and the provisions the company has put in place to protect your data.
If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
Keywords: Customer Service Advisor, Customer Service Executive, Customer Service, Operations, Administrator, Customer Service Adviser, Business Administrator, Customer Service, Operations Executive
....Read more...
Type: Permanent Location: Wokingham, England
Start:
Duration:
Salary / Rate: £25000 - £29000 Per Annum
Posted: 2024-04-16 23:35:02
-
Do you have a passion for aerospace engineering and a proven track record in Fatigue & Damage Tolerance analysis?
Holt Executive are supporting a leading manufacturer who plays a key role in global aviation specialising in building and delivering wings for commercial aircraft.
Our client is seeking a highly motivated Lead F&DT Engineer to play a critical role in ensuring the structural integrity of their aircraft through expert F&DT analysis and leadership.
Rates:
- £30.24 - £37.80 per hour PAYE
- £40.00 - £50.00 per hour Umbrella
Key Responsibilities for the Lead F&DT Engineer:
- Analyse metallic airframe structures using industry-standard tools and processes.
- Compile comprehensive F&DT certification dossiers and technical reports for airworthiness certification.
- Provide valuable insights and contribute to design review presentations.
- Lead and approve F&DT certification deliverables, ensuring the highest quality standards.
- Foster a collaborative work environment and mentor team members.
- Provide regular progress reports to senior engineering leadership.
Key Skills and Experience Required by the Lead F&DT Engineer:
- Bachelors degree in engineering or a related discipline.
- A seasoned aerospace engineer with a proven track record in F&DT analysis.
- Prior experience working within a major aerospace manufacturer.
- Extensive experience in airframe certification analysis, with a preference for wing structures.
- Possess a delegated F&DT approval signature, recognized by the relevant authorities.
- In-depth knowledge of industry-standard F&DT analysis tools, methods, and Finite Element Analysis (FEA) software.
- Proficiency in Nastran, Python scripting, and ISAMI is a strong plus.
If your skills and experience match this Lead F&DT Engineer opportunity, we encourage you to apply by sending your CV to info@holtexecutive.com ....Read more...
Type: Contract Location: Bristol,England
Start: 16/04/2024
Duration: 4.0 MONTH
Salary / Rate: £30.24 - £40 per hour
Posted: 2024-04-16 08:26:03
-
Long-term opportunity for a Contract Mechanical Design Engineer - Solidworks to support a well-known and well-respected market leader in high-tech electronics at their offices in Northamptonshire.
This role has an indicative OUTSIDE IR35 determination therefore we can accept candidates who would like to operate through their own PSC.
Our customer has a long-standing presence in high-performance electronics, with products designed and developed in the UK and sold around the world.
They serve a range of industries including highly regulated, industrial and commercial.
As a result of major project wins combined with unprecedented demand, they are seeking a range of professional contractors.
Working in an experienced design team, you will provide support to a project enabling its transition into full production.
The role offers flexibility to work on a hybrid basis.
Key Skills required - Contract Mechanical Design Engineer - Solidworks, Northamptonshire:
- Strong experience of using Solidworks for 3D design
- Experience of CFD/thermal analysis principles
- Experience of working in highly regulated industries such as aerospace/defence/military
- A background of designing ruggedized enclosures for electronics, using a variety of materials such as metals, plastics etc.
- Familiarity with Vita standards is of particular interest, however not essential to be considered.
This role will require a minimum of BPSS security clearance.
For more information or to apply for the Contract Mechanical Design Engineer - Solidworks opportunity in Northamptonshire, please contact Maddie Ramsden - Mramsden@Redlinegroup.Com / DDi: 01582 878815 / Mob: 07940 254185 quoting reference MMR1008 ....Read more...
Type: Contract Location: Northamptonshire, England
Start: ASAP
Duration: 6 Months +
Salary / Rate: £40 - £50 per hour
Posted: 2024-04-15 16:32:32
-
We are looking for a Process Engineer to work on a permanent basis near Ashton Under Lyne.
Salary is c£35-40,000 per annum plus 25 days' holiday and bank holidays, pension etc.
Brief duties of the role:
Overseeing aluminium heat treatment and material testing processes and compliance
Ability to read / understand aerospace drawings and specifications
NADCAP heat treatment experience
Sheet metal manufacturing
Duties for the Process Engineer:
Process auditing
Carry out a month audit against the NADCAP pre-audit check sheets
Identify any issues / implement corrective actions
Ensure compliance ahead of the annual NADCAP audit
Work closely with the Quality Manager to prepare for the NADCAP audit
Host the NADCAP audit
Respond to any NADCAP audit NCRs
Processing parts:
Using the WTL / AOG tracker, ensure that the team process parts on time
Ensure that the team understand the process specifications and that all parts are processed or tested correctly
Maintain operator training records / stamp scopes are kept up to date
Create, maintain SOPs for each process
Equipment / plant capability
Working with the HDL QE - ensure that all plant / testing equipment remains calibrated
Working with Vectar / other - ensure that all plant is maintained
Oversee the weekly TUS / SAT checks
Ensure that test pieces are sent to AMPP monthly
Update the TPM documents and ensure that daily / weekly checks are completed on time
Sign off 5S checks for the cell/s
Schedule regular plant cleaning (i.e emptying of the quench pit)
Employee training
Provide inductions and training for existing or new employees
Update / maintain training records and matrix
Identify where further training is required and facilitate
Other/ad-hoc:
Identify CI / efficiency opportunities
Develop a technical understanding of the HT database, cleansing / auditing as needed
Act as the ‘go to' person for all technical queries
If the Process Engineer role could be of interest, please call Rebecca at GPW Recruitment or press APPLY NOW! ....Read more...
Type: Permanent Location: Ashton-Under-Lyne, England
Salary / Rate: £35000 - £40000 per annum + holidays, pension
Posted: 2024-04-15 09:56:04
-
Project Manager - Manufacturing
We want to immediately hire a professional Project Manager with experience of taking manufactured projects from conception to production.
As Project Manager for this role, you will ideally come from a technical background and have experience of working in an engineering, manufacturing, electronics, electrical, automotive, aerospace, agricultural vehicle / machinery or Off Highway vehicle sector.
Business & Global Reach:
The business is an established market leader within its field, covering OEM, Retro-Fit / Aftermarket sectors, leading innovation for product design and development for lifesaving products to optimise vehicle safety, operating globally across multiple countries.
Target Experience:
Our ideal candidate will have a good understanding of Managing Projects within major technical sectors and have the ability to lead / head up multiple projects and build relationships with colleagues and customers.
Ideally located / HYBRID - South East UK / Kent, Royal Tunbridge Wells, Dartford, Gillingham, Bromley, Greenwich, Croydon, Sevenoaks, Orpington
Salary - Circa £55K - £65K + Car / Allowance + Pension (up to 5%) + Private Medical +Eye Care Vouchers + Employee Assistance Program + 25 days Hols exc BH (Holiday entitlement increases by 1 day every 2 years)
Key Skills:
Minimum 2 to 3 years Project Management experience.
Have a technical background - lead engineering teams.
Ideally have an understanding and knowledge of working with and supporting OEM and Tier 1 customers.
Experienced at managing multi disciplined teams through project life cycle.
Be comfortable working in a fast-paced environment.
Have the skill to build internal and external relationships.
Self-motivated and able to work independently.
Be a confident communicator - written and verbal.
BTEC, HNC / City & Guilds or equivalent in engineering or science discipline.
Solid PC user within key Microsoft applications.
The Next Step:
To express an interest in this role, please call Robert Cox of Glen Callum Associates Ltd for an initial confidential chat on 00 44 (0) 7398 204832 or email with your CV detailing how your experience meets with the above.
Job Ref: 4121RC - Project Manager - Manufacturing ....Read more...
Type: Permanent Location: Kent, England
Start: 13/05/2024
Salary / Rate: £55000 - £65000 per annum + Car + Pension + Healthcare
Posted: 2024-04-13 12:00:16
-
We are currently partnering with an established and privately owned design and manufacturer of products into the Aviation industry sector to identify and recruit a QA / Safety Systems Engineer.
This is an exciting time to be joining this established business, who have developed an extensive track record of developing and supporting a range of innovative products into the Commercial Aviation sector, including major aircraft manufacturers and operators world-wide.
As Quality / Safety Systems Engineer you will provide support across the business, ensuring compliance with various approvals & certifications and that appropriate and robust processes & systems are in place and contributing to the needs of the business.
The successful candidate must be capable of thorough and conscientious work to deadlines and across multiple projects, adapting to changing priorities as business needs require.
Key Experience Requirements:
Previous experience in a similar role (Quality Control), gained within a commercial aviation or aerospace organisation, ideally within a Design & Manufacturing environment
Be conversant and knowledgeable with the legislative safety requirements for Airborne Equipment / Products
Educated to a minimum HND Level in a relevant discipline (Aerospace Engineering or similar)
The ability to work across a multi-disciplinary team, including Design, Quality and Manufacturing
In-depth understanding of aerospace industry standards, regulations and best practices, including AS9100, ISO9001, CAA, FAA, TSO and RTCA DO-160
Previous experience of Risk Identification and Assessment
Demonstrable ability to develop and implement process improvements and drive best practice
Strong problem-solving skills
....Read more...
Type: Permanent Location: Fylde, England
Start: ASAP
Salary / Rate: £30000 - £35000 per annum
Posted: 2024-04-12 13:43:34
-
A global leading technology organisation are seeking an Mechanical Engineering Team Leader to join their expanding R&D facility, based in Southampton, Hampshire.
The Mechanical Engineering Team Leader, Southampton, Hampshire will report into the Senior Engineering Manager and will be responsible for development of products throughout the entire lifecycle.
You will provide leadership and line management for the engineers within the team.
You will lead product development -activities concerning product compliance and certification according to industry standards.
Other responsibilities of the role will include:
- Strong experience with Solidworks
- Experience in a precision electronic or industrial product design role
- Experience of designing sheet metal fabrications/CNC machining
- Knowledge of geometric tolerances (GD&T)
- Skills with CFD/thermal management are HIGHLY desirable
The Mechanical Engineering Team Leader, Southampton, Hampshire will ideally have approx 10 years of experience within industry.
Ideally from a highly regulated environment like Aerospace/Defence/Automotive.
This position will be 50% hands on and 50% management, however they are flexible with this for the right person.
APPLY NOW for the Mechanical Engineering Team Leader job by sending your CV to blongden@redlinegroup.Com
If you'd like more information before applying, you can call Brett Longden on 01582 878841 / 07961 158773.
Otherwise, we always welcome the opportunity to discuss other Engineering jobs. ....Read more...
Type: Permanent Location: Hampshire, England
Start: ASAP
Salary / Rate: £55000 - £68000 per annum
Posted: 2024-04-12 11:54:48
-
CNC Turner
CNC Turner Salary: £15-21 ph
Shifts: Days, Shifts or Nights
The Company
My client is a precision engineering company with decades of experience in the aerospace and defence industries.
They design, manufacture, and supply high-quality components for a wide range of applications, including jet engines, aircraft structures, and weapons systems.
My client is committed to providing their customers with the highest quality products and services, and they are looking for a well-accomplished CNC Turner to join their team.
CNC Turner Role & Responsibilities
- Set & operate CNC lathes
- Comfortable using Fanuc controls
- Using hand tools to inspect your own work
- Work from technical drawings
- Well-practiced keeping records of the manufacturing process, including the materials used, the tools used, and the settings used.
- This position is on either days, double-day or nights shift pattern
CNC Turner Skills
- Posses a Level 3 qualification or similar within Engineering
- A proven background within the aerospace, defence or similar standard is a big plus
- Able to change tools, set offsets and edit programs
What Next?
If you're local to Yeovil and want to work within a fun, friendly & supportive environment, apply for the CNC Turner role now or call Hayden at Holt Engineering on 07955 081 482 for more information. ....Read more...
Type: Permanent Location: Yeovil,England
Start: 12/04/2024
Salary / Rate: £15 - £21 per hour
Posted: 2024-04-12 07:38:06
-
Are you a Non Destructive Test / NDT Inspector looking for a new and exciting opportunity in the Bristol area for an exciting Aerospace company?
My client is currently looking for an NDT Inspector to join their team in Bristol due to growth within the business and new upcoming projects.
The NDT inspector will be processing and inspecting components using Non Destructive Testing (NDT), by dye penetrant immersion and magnetic flaw detection processes to ensure components parts conform to drawing and process requirements with no cracks or defects.
Key skills and experience required for the NDT Inspector role based in Bristol:
Experience running a NDT line
Experience with dye penetrant
Ability to check components for defects
Excellent communication skills
Completed or near completed NDT Level II (desirable)
Aerospace experience (desirable)
If you would like to hear more information on this NDT Inspector role based in Bristol, please call Leah Rogers on 01582 878834 or 07961 158783 alternatively, email you up to date CV to LRogers@redlinegroup.Com ....Read more...
Type: Permanent Location: Bristol, England
Start: ASAP
Salary / Rate: £20000 - £35000 per annum
Posted: 2024-04-12 00:00:15
-
CNC Programmer
Location: Aylesford, Kent
Salary: £27,500 - £40,000 (DOE) + Excellent Benefits
Full-Time, Permanent,Monday - Friday, Between 7-8 am - 3-4 pm (38 Hours)
The Client:
Our client is a well-established manufacturing firm, excels in precision CNC machining, delivering rapid, outstanding solutions to Motorsport, Aerospace, and Entertainment sectors.
The Role:
As a CNC Programmer/ Setter / Operator, you will craft precision components utilising CAD data on 3 & 5 axis CNC machines, with Power mill for CAM programming.
Requirements:
* Previously worked as a CNC Programmer, CNC Operator, CNC Setter or in a similar role.
* Practical experience with hand tools and machinery such as Band saws.
* Background in operating 3 or 5 axis CNC machinery.
* Demonstrable experience with CAM software, preferably Powermill.
* Knowledge of inspection and measuring equipment for quality assurance.
* Understanding of engineering drawings.
* Experience with Heidenhain TNC controls would be preferred.
* Minimum 2 years of experience in CNC programming and machining would be preferred.
Benefits:
* Competitive salary
* 26 days plus bank holidays
* Company pension
* On-site parking
* Overtime availability
Apply now for this exceptional opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner.
In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message.
For more information see our Privacy Policy on our website.
It is important you are aware of your individual rights and the provisions the company has put in place to protect your data.
If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
Keywords: CNC Programmer, CNC Operator, CNC Setter, CNC Turner, CNC Machinist, CNC Miller, CNC, Jobs
....Read more...
Type: Permanent Location: Aylesford, England
Start:
Duration:
Salary / Rate: £27500 - £40000 Per Annum
Posted: 2024-04-11 12:44:56
-
A job as a Process Development Engineer is urgently required in Great Yarmouth, Norfolk for a company that offers a 9 day working fortnight!
An exciting new job has arisen for an Process Development Engineer, based in Great Yarmouth, Norfolk to play a pivotal role in delivering solutions to material and integration challenges aligned with optoelectronic assemblies / hybrid microelectronics packaging.
The Process Development Engineer located in Great Yarmouth, Norfolk will be the subject matter expert for optoelectronic materials and development within manufacturing processes.
You will liaise with design and manufacturing departments as well as externally with customers on multi-channel optical communications.
The ideal Process Development Engineer, based in Great Yarmouth, Norfolk will have;
A background in optoelectronic assemblies / devices
A good understanding of product development from NPI through to manufacture
The ability to obtain Security Clearance
This is for a company that specialise in the design and manufacture of secure communication devices for predominately the defence and aerospace sectors.
They offer a range of excellent benefits from a 9 day working fortnight, hybrid working, flexitime as well as assisting with relocation costs of up to £8,000.
APPLY NOW! For the Process Development Engineer job located in Great Yarmouth, Norfolk by sending a cover letter and CV to TDrew@redlinegroup.Com or by calling Tom Drew on 01582 878848 or 07961158762 quoting ref.
THD1251.
Alternatively, if this job is not suitable but you are looking for a job within Engineering, please call 01582 878 848 for a confidential discussion. ....Read more...
Type: Permanent Location: Norfolk, England
Start: ASAP
Salary / Rate: £50000 - £55000 per annum
Posted: 2024-04-11 00:00:03
-
CNC Turner Programmer
Mazak Machines
Mazatrol based controls
Aerospace / Motorsport Industry
Day Shifts - Birmingham - B7
Starting salary up to £38,500 Per Annum Depending on Experience
Overtime and Weekend Work available
31 Days Holiday
Are you a skilled CNC Turner with experience on Mazatrol-controlled Mazak machines? If yes, read on
.
My client is an established engineering manufacturing firm based in Birmingham and commutable from Walsall, Dudley, Wolverhampton, Solihull and Tamworth.
They are currently looking for a skilled CNC Turning Programmer to join their team.
The Role: CNC Turning Programmer
- Lead role looking after area of 2 Mazak machines
- Set, operate and program CNC Mazak Turning Machines
- Online program editing and programming from scratch
- Adjusting offsets and making adjustments within programs
- Working on Mazatrol-based controls
- Working from drawings
- Quality control of components
- Maintaining machinery, removing swarf and routine oiling/greasing etc
- Carry out any other duties as required and deemed appropriate
- Complies with all Company rules including all Health, Safety, Quality and Environmental requirements
Minimum Skills / Experience Required: CNC Turner Programmer
- Experience of Setting, Operating and Programming CNC Mazak Turners
- CNC Turner on Mazatrol controls
- CNC Programming experience essential
- Experience with Precision Engineering and working to tight tolerances
- Experience in the Aerospace or Motorsport industry is desirable
- Experience working from engineering drawings
- Able to quality check own parts
- Able to work under pressure and to deadlines with a high level of quality standards achieved
- Motivated and excellent team player
The Package: CNC Turner Programmer
- Starting rate up to £19 per hour dependent on experience
- Afternoon shifts are Mon Thurs, 08:00-17:00 Friday - 08:00-13:00
- Pension
- 31 Days Holidays
- Progression opportunities - potential to train apprentices in the future
Interested? To apply for this CNC Turning Programmer position, here are your two options:
1.
"This is the job for me! When can I start?" - Call 0116 2545411 now and lets talk through your experience.
Ask for Nilam between 8.30am - 5.30pm.
2.
"I think I'm right for this position, but I'm not sure I have enough to get an interview" - Click "apply now" so I can read your CV and let you know
PPDEL ....Read more...
Type: Permanent Location: Birmingham,England
Start: 10/04/2024
Salary / Rate: £32448 - £38500 per annum, Benefits: Pension. 31 Days Holidays. Progression opportunities.
Posted: 2024-04-10 16:59:03
-
CNC Miller
An opportunity has opened up for a skilled CNC Miller to join a well-established precision engineering company who have been operating for over 80 years.
The company specialises in a range of different industries such as the defence, aerospace, automotive, nuclear, oil and gas and other specialised industrial markets.
Skills needed for CNC Miller
- Can interpret technical engineering specifications
- Ability to set and operate CNC Mills
-
*Must
* be able to program 3 & 4 axis Mills using Mazatrol
Benefits for CNC Miller
- 25 days annual leave + BHs (Christmas shutdown comes out of allocation)
- Nest Pension
- On-site parking
If you are interested in this CNC Miller opportunity please contact James on 07485 390941 or email James.Ferrier@holtengineering.co.uk ....Read more...
Type: Permanent Location: Camberley,England
Start: 10/04/2024
Salary / Rate: £28000 - £33000 per annum
Posted: 2024-04-10 16:35:04
-
CNC Turner
An opportunity has opened up for a skilled CNC Turner to join a well-established precision engineering company who have been operating for over 80 years.
The company specialises in a range of different industries such as the defence, aerospace, automotive, nuclear, oil and gas and other specialised industrial markets.
Skills needed for CNC Turner
- Can interpret technical engineering specifications
- Ability to set and operate CNC Lathes
- Familiar with either Fanuc or Siemens controls
Benefits for CNC Turner
- 25 days annual leave + BHs (Christmas shutdown comes out of allocation)
- Nest Pension
- On-site parking
If you are interested in this CNC Turner opportunity please contact James on 07485 390941 or email James.Ferrier@holtengineering.co.uk ....Read more...
Type: Permanent Location: Farnborough,England
Start: 10/04/2024
Salary / Rate: £25000 - £28000 per annum
Posted: 2024-04-10 16:30:40