-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and offers constructive criticisms relative to variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Consult with Main Lab chemist on products more than 10% out of product specifications Upon approval of product record data onto Quality Control car and enter information into computer data base Consult QC manual for specific requirements for product analysis of production batches and customers special requirements Calibrate QC equipment as required Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude. Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2024-04-30 15:08:42
-
We have an exciting opportunity for a Bioanalytical Scientist to join a fast-growing CRO based in the Cheshire area.
As a bioanalytical scientist, you will be primarily laboratory-based, working with the team to ensure that bioanalytical assays utilising LC-MS/MS or Ligand Binding technology are performed to a GLP/GCP standard and delivered within scheduled time frames.
The team work on a broad range of molecule types including small molecules, peptides, Oligonucleotides and Proteins.
You will be involved with the development and validation of the assays and will also use the assays to analyse samples from the company's clients studies.
KEY DUTIES AND RESPONSIBILITIES:
Your duties as the Bioanalytical Scientist will be varied however the key duties and responsibilities are as follows:
1.
You will be responsible for the development of quantitative and qualitative methods for the analyses of drugs and biomarkers within a GLP / GCP environment.
2.
As a Scientist within the Bioanalysis team you will be carrying out LCMS/MS and HPLC methods for analysing drug metabolites as well as applying these methods in clinical and pre-clinical studies.
3.
Your role will include preparing and planning studies and reports whilst working in compliance with GLP / GCP.
Additional responsibilities will include routine MS, UPLC and bioanalytical extraction as well as method development, method validation and troubleshooting.
4.
As the Senior Scientist, you will have additional responsibilities such as supervise and mentor more junior laboratory scientists as well as some responsibility with client interaction when required.
ROLE REQUIREMENTS:
To be successful in your application to this exciting opportunity as the Bioanalytical Scientist we are looking to identify the following on your profile and past history:
1.
Relevant degree in a Life Sciences related degree such as, but not limited to, Chemistry, Biochemistry and Biotechnology.
2.
Proven industry experience of working in a bioanalytical laboratory performing quantitative analysis and experience of sample extraction techniques for biological sample analysis.
3.
Practical experience working within a regulated GLP / GCP / GxP / GMP laboratory is also essential to your application.
Key Words: Biotechnology | GCP | GMP | GxP | Life Sciences | LCMS | HPLC | Bioanalytical | Scientist | Chromatography | Drug Development | CRO | Quality | Biological Matrix | Bioanalysis Senior Scientist
Hyper Recruitment Solutions Ltd (HRS) is an Equal Opportunities employer who are certified by Investors in People for talent development.
We therefore welcome applications for any interested parties who fulfil the role requirements for this position.
HRS is a company exclusively supporting the science and technology sectors, and is made up of a collaboration of recruitment professionals and scientists.
We look forward to helping you with your next career moves. ....Read more...
Type: Permanent Location: Cheshire,England
Start: 30/04/2024
Salary / Rate: Competitive
Posted: 2024-04-30 09:47:30
-
We have an exciting new opportunity for a Study Manager Team Lead to join a leading international CRO based in the North Yorkshire area.
As the Study Manager Team Lead you will be responsible for directly line managing a team of Study Managers for regulatory and non-regulatory small molecule bioanalytical studies.
KEY DUTIES AND RESPONSIBILITIES:
Your duties as the Study Manager Team Lead will be varied however the key duties and responsibilities are as follows:
1.
As the Study Manager Team Lead you will directly line manage a team of study managers to ensure the successful execution of small molecule bioanalytical studies.
2.
You will collaborate with cross-functional teams, including sponsors and clients, to plan and coordinate study activities, acting as departmental lead for bioanalytical activities conducted on assigned studies.
3.
As the Study Manager Team Lead you will oversee LC-MS/MS method development and troubleshooting including reviewing protocols, study plans, SOPs or reports as required.
4.
You will document and complete any quality documentation (quality issue, CAPA, deviation, change control) as appropriate and within required time frames.
ROLE REQUIREMENTS:
To be successful in your application to this exciting opportunity as the Study Manager Team Lead we are looking to identify the following on your profile and past history:
1.
Hold a degree in a Chemistry based subject or equivalent (e.g.
Biochemistry)
2.
Proven industry experience in study management leading small molecule bioanalytical studies.
3.
A working knowledge and practical experience using LC-MS/MS.
Key Words: Small Molecule | Study Manager | Team Lead | Bioanalysis | GLP | GCP | Method Development | Validation | Sample Analysis | Regulatory Compliance | LC-MS/MS
Hyper Recruitment Solutions Ltd (HRS) is an Equal Opportunities employer who are certified by Investors in People for talent development.
We therefore welcome applications for any interested parties who fulfil the role requirements for this position.
HRS is a company exclusively supporting the science and technology sectors, and is made up of a collaboration of recruitment professionals and scientists.
We look forward to helping you with your next career moves. ....Read more...
Type: Permanent Location: North Yorkshire,England
Start: 30/04/2024
Salary / Rate: £45000 - £65000 per annum
Posted: 2024-04-30 09:42:02
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Field Technical Representative ensures proper application of Tremco CPG products in accordance with all company and industry guidelines by providing on-site application and problem resolution.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Provide independent support for primary territory product lines.
Recommend products and solutions outside of primary product lines with occasional direction.
Provide site support by performing general and complex product applications.
Perform substrate analysis using specialty equipment.
Keep up-to-date technically on practical procedures, specialized techniques to apply new knowledge within the field.
Provide field support by collecting data for project or product specific testing and interpreting results.
Recommend application policies within technical literature.
Coordinate 3rd party testing certification/approvals Provide live and/or web-based training for internal staff and/or external customers.
Create instructional hands-on demonstrations in a classroom, distributor locations, or job site settings showing application of products.
Exercise clear and confident communication of product lines and construction practices during presentation delivery.
Use relevant information and individual judgment to determine whether designs or applications comply with local codes, industry standards, and regulations.
EDUCATION:
Bachelor's Degree in Science, Engineering, Construction, or similar preferred.
and 2-4 years of construction or industry experience OR Minimum High School Diploma or GED with 5 years of construction or industry experience
EXPERIENCE: Minimum 2 years of related experience and/or training with the application of EIFS / Plastering Metal Panels experience is a plus Active listening and attention to detail Building and construction knowledge of materials, methods, and the tools involved in the construction or restoration of buildings or other structures Knowledge of product application Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models.
Knowledge of chemical composition, structure, and properties of substances and of the chemical processes and transformations they undergo.
This includes chemistry of current and future products and systems.
Customer Service skills, including needs assessments and evaluation of customer satisfaction.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:. Excellent written and verbal communication skills Effective team player Proficient in Microsoft Office (Word, Excel, Outlook) Proven ability to understand, use, and manage your own emotions in positive ways to relieve stress, communicate effectively, empathize with others, overcome challenges and diffuse conflict. Demonstrates self-awareness and emotional self-control through adaptability, achievement orientation, and a positive outlook. Accepts and utilizes feedback effectively. Reads an audience and adjust style and approach accordingly. Strong presentations skills Excellent interpersonal and organizational skills
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally starts at $80K and goes up based on experience.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran statusApply for this ad Online! ....Read more...
Type: Permanent Location: Phoenix, Arizona
Posted: 2024-04-30 07:08:13
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: The Quality Managers manages the Quality Process to ensure we are effectively meeting our key business metrics and satisfying all customer product requirements.
Key responsibilities include Quality, Lean and Six Sigma, and Continuous Improvement with responsibility for ISO quality systems and compliance.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Oversee all quality related functions in the plant.
Act as primary plant liaison with Customers dealing with their processing issues.
Participate in the development of specifications for processing, products, and materials.
Work directly with Corporate and local Purchasing on vendor quality or supply issues; assist with vendor selection and qualification.
Manage ISO Quality systems.
Lead the lean/six sigma initiatives in the plant.
Respond to and report on customer complaints - manage the root cause investigation, corrective action implementation and follow up, and the SAP quality process.
Interact professionally and timely both verbally and in writing with customers and sales force.
Develop quality standards for raw materials and finished product.
Oversee all lab functions and personnel, assuring safety and integrity of those operations.
Perform testing on raw materials and finished product as required.
Implement material cost saving plans where and when appropriate.
Participate in annual budget planning.
Assist in all compliance activities, especially HazCom and maintaining SDS system.
Other projects/tasks as assigned.
EDUCATION: Bachelors degree in Quality, Chemistry, Chemical Engineering, Materials, Polymer, or Business is required.
EXPERIENCE:
4+ years of experience is required. Experience with chemical batch-making operations and quality programs, such as Lean, ISO, Six Sigma, is required.
CERTIFICATES, LICENSES, REGISTRATIONS:
ISO certification is required
REQUIRED SKILLS, ABILITIES, AND QUALIFICATIONS:
Color Matching Knowledge Chemical Batch Making Knowledge ISO knowledge Six Sigma / Lean Thinking Training experience Strong communication skills (written, verbal) Ability to maintain confidentiality Knowledge of MRP/ERP systems (SAP) Solid computer skills (Word, Excel, Lotus Notes) Design of experiments skill
PHYSICAL DEMANDS: Incumbent must be able to stand, sit, walk, use hands, reach, climb, talk, hear, smell, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2024-04-30 07:08:11
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America
GENERAL PURPOSE OF THE JOB: Ensures that the assigned revenue, margin and product mix objectives, within the corporate business framework, are met or exceeded.
This is to be accomplished by securing, developing, and managing key architects, designers, general contractors, distributors, subcontractors, and end-user accounts.
This position will also own and manage all related performance and service metrics for the assigned accounts.
ESSENTIAL DUTIES AND RESPONSIBILITIES: Achieves or exceeds assigned sales goals and expectations.
Works primarily with existing accounts, while seeking and developing new account opportunities to influence and increase use of Tremco CPG products in assigned territory.
Manages assigned accounts to establish business development opportunities through account penetration, analysis, partnership with key decision makers, and strategic initiatives.
Drives product specifications and project opportunities throughout assigned territory.
Leverages industry knowledge, marketplace dynamics and key relationships both internally and externally to develop trusted partnerships and advisory relationships with customers with a focus on problem identification, exploration and resolution.
Annually prepares and delivers strategic business/territory plans for each customer with monthly forecasts.
Consistently and efficiently follows the standard sales process to identify prospects and decision makers, gain customer commitment, predict sales probability, and effectively close deals.
Manages day-to-day contact, exchanges information succinctly, truthfully and ethically while addressing issues directly and tactfully in pursuit of mutual interest and benefit.
Develops and delivers technical, high quality and directed digital collateral, product prospectus, presentations, and business correspondence in support of the overall sales process.
Collaborates with senior staff to coordinate and execute product knowledge training sessions with internal and external customers, as appropriate, utilizing supplier representatives.
Leverages all available technology on a daily basis for productivity and effective lead generation, account maintenance, sales and expense tracking, forecasting, account reviews, customer contact, presentations, etc.
Works collaboratively with internal support resources to develop teamwork through cooperation, trust and mutual respect.
Attends and presents business unit products and services at industry conventions and trade shows.
Maintains extensive product knowledge in all product lines and service offerings.
Adheres to and enforces all company policies, pricing, and operational procedures with special attention to the professional image of the company.
Performs other related duties as required, requested or assigned.
EDUCATION
Bachelor's Degree in Business, Sales, Construction Management and 2-3 years of construction or industry experience OR Minimum High School Diploma or GED with 5 years of construction or industry experience
EXPERIENCE
Two to four years related experience and/or training Construction knowledge (i.e., waterproofing, air barriers, framing, modular, etc.) Assembly line related product segments Basic knowledge of product chemistries
OTHER SKILLS AND ABILITIES:
Ability to travel extensivelywithin assigned territory.
Must be well organized,self-motivated, with outstandingwritten and verbalcommunication skills Proficient with Microsoft Office Suite (Word, Excel, PowerPoint) Salesforce.com or other CRM software experience preferred Possess a professional curiosity to figure out how things work or are put together Ability to retain knowledge and training Proven ability to understand, use, and manage your own emotions in positive ways to relieve stress, communicate effectively, empathize with others, overcome challenges and diffuse conflict.
Demonstrates self-awareness and emotional self-control through adaptability, achievement orientation, and a positive outlook.
Accepts and utilizes feedback effectively.
Reads an audience and adjust style and approach accordingly.
Excellent written and verbal communication skills Strong presentations skills Excellent interpersonal and organizational skills Ability to build relationships and deliver exceptional customer service.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, kneel, talk, hear, and lift up to 25 lbs.
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally starts at $85K and goes up based on experience.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran statusApply for this ad Online! ....Read more...
Type: Permanent Location: Phoenix, Arizona
Posted: 2024-04-30 07:08:04
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: The EHS manager is accountable for the development and implementation of programs in the Environmental, Health, Safety and Security areas of manufacturing.
TREMCO'S EXPECTATIONS FOR ALL LEADERS:
Embodies the company's core values of transparency, trust, and respect by demonstrating integrity, commitment, responsible entrepreneurship, and moral courage.
Applies the company's policies and adheres to processes to ensure compliance and organizational best practices.
Demonstrates a commitment to diversity, equity, and inclusion in all areas of responsibility such as hiring and promotion decisions.
Effectively and efficiently onboards new employees.
Conducts annual performance evaluations and provides ongoing performance feedback, maintaining clear and timely documentation.
Coaches and manages employees using the company's philosophy and tools to ensure talent is developed and retained.
Constructs succession plans to ensure sustainability and continuity of area of responsibility.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Investigate and document adverse effects of product use on humans and the environment, for both personal and commercial applications. Communicate product usage standards to ensure safety and mitigate risks, ensuring understanding among all stakeholders. Lead and implement regulatory compliance programs in occupational health, safety, hazardous materials, environmental management, and materials transportation. Interpret regulations, develop compliant programs, and provide training across North America, focusing on legislative compliance and organizational appropriateness. Conduct safety audits, manage Environmental, Health, & Safety (EH&S) compliance statistics, and recommend annual safety program updates. Act as the primary contact with regulatory bodies, provide litigation support, and potentially serve as an expert witness. Maintain and update knowledge on EH&S regulations, particularly in hazardous materials management across various jurisdictions. Research and advise on best practices in chemical manufacturing, distribution, disposal, policy gaps, and program improvements. Prepare for legislative changes with proactive program options and contingency plans, focusing on chemical products and regulatory updates. Serve as a key resource on occupational health, safety, and environmental management policies and standards. Collaborate with Human Resources in workplace injury case management and return-to-work programs. Lead the development and implementation of EH&S compliance codes and training programs, identifying and correcting non-compliant processes. Ensure employee training and awareness in EH&S procedures, analyzing financial implications of program and regulatory changes. Establish regulatory guidelines in chemical hazard identification, safety risk assessment, and conduct ongoing compliance audits. Provide guidance to ensure operational plans are in compliance with EH&S requirements, and act as an advisory resource on regulatory compliance and best practices to the management team.
EDUCATION REQUIREMENT: 4 year College or University degree in Natural Sciences (Chemistry, Engineering, Environmental Sciences, or Safety Sciences).
EXPERIENCE REQUIREMENT:
4+ years' experienceleading and contributing to compliance and regulatory policy and program development in a materials processing environment.
Formal training in occupational health and safety.
Process Safety Management (PSM) and Class 1 Division 1 (C1D1) are highly preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Certified Safety Professional preferred. Ability to travel across North America approximately 10%.
Broad understanding of regulatory compliance requirements, risk assessment and mitigation programs in multiple (particularly North American) jurisdictions.
Ability to inspire others to commit to and achieve EHS&S program goals and performance measures in a production environment with varying levels of literacy and educational background.
Ability to develop a business case for new EHS program development/program modification.
Ability to manage program administration requirements across multiple, disparate (production, distribution, warehousing, sales, and marketing) divisions.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 25 lbs.
BENEFITS AND COMPENSATION:
The base range for this position is $87,000.
to 110,000.
plus a 15% bonus opportunity.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2024-04-30 07:07:51
-
JOB DESCRIPTION
Position Summary
Carboline is seeking a Senior Chemist at our Research and Development facility, in St.
Louis, MO.
This role will apply and interpret standard scientific or engineering theories, concepts and techniques in a scientific or engineering specialty requiring a working knowledge of related disciplines.
They will work on a wide range of problems where causal relationships are progressively difficult to establish and the use of creative thinking is required.
Minimum Requirements
4-year Chemistry degree or equivalent experience, 10 years Chemistry experience.
Essential Functions
Prepare project requests or research proposals on assigned projects.
Create ideas for new products or approaches and conduct individual investigations.
Apply creative approach to problem solving and formulation. Execute laboratory projects and continuously assess effectiveness.
Develop research findings, draw conclusions, and make recommendations.
Prepare and present written or oral reports. Contribute to research programs of others through communications and participation in technical work groups and design teams. Responsible for meeting project goals within time, quality and budget constraints.
Utilize initiative to keep projects on track. Supervise efforts of technicians and/or chemists, while also coordinating the work of others, anticipating, and resolving priority conflicts. Acquire and maintain technical expertise in coatings industry and its technologies. Communicate and verify technical information directly to various departments, suppliers or customers.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace for seven years in a row, so culture and maintaining a safe and clean work environment is something we take very seriously. Carboline is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan. Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best"
EEO M/F/D/V/SO
This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job.
Duties, responsibilities and activities may change at any time with or without notice.
Apply for this ad Online! ....Read more...
Type: Permanent Location: St. Louis, Missouri
Posted: 2024-04-30 07:07:28
-
JOB DESCRIPTION
Job Code: CA6112 Department: RD&I Bonus Plan: N/A Location: St.
Louis Training Matrix Code: N/A FLSA: Non exempt
Title: Research and Development Intern Summary: The 10-12 week R&D summer internship program provides an opportunity for students to work closely with senior chemists in order to improve technical skills while being given a developmental opportunity in a chemical industrial setting.
Interns will be given the opportunity to take ownership of an assigned project by performing, analyzing, and presenting experiments targeted toward high-performance coatings, linings, and fireproofing products.
Minimum Requirements: This paid intern will work roughly 30 - 40 hours per week from May-August.
Qualified interns should be pursuing a BS or MS degree in chemistry, biology, chemical engineering, or other closely related majors.
Strong interpersonal, communication, organizational, teamwork, and time management skills are essential.
*Students must have housing arrangements in or near St.
Louis for the summer, as housing allowance is not provided.
Physical Requirements: This position requires minimal physical activity but does require computer usage for an extended period of time - up to 8 hours in a day.
Basic knowledge of PPE, lab settings and equipment, standing for semi-long periods of time.
Essential Functions: Primary responsibilities include but are not limited to:
• Become proficient in laboratory experiments by using laboratory instruments, and equipment and following established testing procedures • Participate in all phases of research including planning, preparation, calibration, application, evaluation, data analysis, maintenance, and when necessary, appropriate disposal • Design and conduct experiments with mentorship guidance within a defined project • Draw sound scientific conclusions based on data analysis • Present project reviews before colleagues, senior executives and business leaders o Interns are expected to always operate in a safe and efficient manner • Perform additional duties as assigned • Commit to the Company's safety and quality programs.
This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job.
Duties, responsibilities, and activities may change at any time with or without notice. I have reviewed the above job description and understand the job responsibilities as they have been listed.Apply for this ad Online! ....Read more...
Type: Permanent Location: St. Louis, Missouri
Posted: 2024-04-30 07:07:16
-
JOB DESCRIPTION
Position Summary:
Carboline is seeking a Chemist located in Greensboro, North Carolina.
This person will be responsible for applying and interpreting standard scientific or engineering theories, concepts, and techniques, requiring a working knowledge of related disciplines.
This position is looking for someone who will be developing new products and/or maintaining existing products.
Prior knowledge of the development, adaptation, and formulation of paint and coatings is necessary.
Having previous experience with the formulation of materials like; epoxy, urethane, vinyl ester, acrylic, alkyd, polysiloxane, and polyurea coatings for protective and marine applications, is preferred.
Requirements:
4-year Chemistry degree or equivalent experience, 10-15+ years Chemistry experience.
Must have prior experience formulating paint/coatings.
Physical Requirements:
Lifting up to 50 pounds; exposure to chemicals including but not limited to: Amines, Polyamides, Isocyanates, Epoxies, Alkyds, Acrylics, and certain inorganic compounds.
Personal protective equipment would be utilized.
Must pass annual respirator medical evaluation and pulmonary function test as required by OSHA. Essential Functions: • Working with lab director and sales management to design, develop, test, and introduce new and innovative coating solutions. • Development of new wall and floor products for application in industrial, architectural, universities and biological research laboratories. • Maintaining existing products. • Acquiring and using skills with in-house formulation and manufacturing software system. • Assisting in development of new product SDS's. • Position reports to Lab Director
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace for seven years in a row, so culture and maintaining a safe and clean work environment is something we take very seriously. Carboline is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan. Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply. "In order to be the best, we must hire the best"Apply for this ad Online! ....Read more...
Type: Permanent Location: Greensboro, North Carolina
Posted: 2024-04-30 07:07:16
-
JOB DESCRIPTION
The Continuous Improvement Leader will lead continuous improvement efforts at the manufacturing plant level.
They will work with plant management and personnel to maintain and improve the MS168 Continuous Improvement program.
They will also work with the manufacturing plants and various corporate functions to determine where the most significant areas of improvement exist.
Complete Six Sigma projects and provide support for plant level Six Sigma Projects.
In addition, they will organize and execute focused Improvement Teams (like Kaizen Events).
Responsibilities
Implement, develop, and sustain MS168 Continuous Improvement Program.
(Including Conducting Semi-Annual Audits) Complete Six Sigma projects and provide support for plant level Six Sigma projects. Work with the manufacturing plants and various corporate functions to determine where the most significant areas of improvement exist and develop projects from those opportunities. Organize and execute and track progress of Focused Improvement Teams Provide a Supportive Project Management Office including MPST & Monthly Savings tracking and reporting. Provide Training of Lean Manufacturing Principals and Six Sigma Tools to Plant and Corporate Associates Track Company Key Performance Indicators and develop action plans for identified areas of opportunity.
Requirements
5 years of experience in the manufacturing industry. 50% of the role is on floor and 50% in office. Should be willing to work with hourly associates and staff directly.
Should be willing to work on the floor, roll up their sleeves and be a part of the team. Engineering or Chemistry degree is preferred but not mandatory with good significant manufacturing experience, use of lean principles in daily work. Six Sigma Black Beltpreferred. Sealant, Adhesive, Coating or Paint industry experience preferred. Able to travel 50%. Technical Expertise: Strong root cause analysis skills.
Experience with processes such as TapRooT, Kepner Tregoe or equivalent is preferable. Demonstrated use of analytical analysis: statistical process control, process capability analysis, correlation, ANOVA, DOE preferable. Proficiency in Microsoft Office (Word, Excel and PowerPoint). Preferable proficiency in ERP Systems (SAP, Business Objects, etc.) and Statistical Analysis Software (Minitab, etc.) Knowledge of and demonstrated use of Lean Manufacturing tools. Leadership Skills: Must be self-motivated. Ability to motivate others. Ability to endorse and practice teamwork. Project Management Skills Project management experience required. Must be organized and committed to meeting deadlines. Possesses the skill to lead multiple improvement projects at the same time. Communication Skills: Able to speak, listen, and write well. Effective presenter, facilitator, and trainer. Proficiency in creating effective reports.
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world. At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Baltimore, Maryland
Posted: 2024-04-30 07:07:04
-
JOB DESCRIPTION
Position Summary:
We are seeking a highly motivated and detail-oriented Chemist with 0-2 years of experience in the field of paint and coatings.
The ideal candidate will have a strong educational background in physical sciences, holding at least a bachelor's degree.
The position is based at DayGlo Color Corporation in Cleveland, OH, a subsidiary of RPM International, a global leader in specialty coatings, sealants, and building materials.
Responsibilities:
Pigment Dispersion: Execute and optimize the preparation of pigment dispersions for paint and coating formulations, ensuring quality and consistency.
Laboratory Work: Conduct experiments, analyses, and tests to support product development and improvement initiatives.
Documentation: Maintain accurate and detailed records of experimental procedures, results, and observations in accordance with industry standards.
Collaboration: Work closely with cross-functional teams, including researchers and engineers, to contribute to the overall success of projects.
Quality Control: Assist in quality control processes, ensuring compliance with industry regulations and DayGlo's high standards.
Research: Stay updated on industry trends, new technologies, and advancements in paint and coatings to contribute innovative ideas to the team.
Communication: Strong verbal and written communication skills to effectively convey findings and collaborate with team members.
Analytical Thinking: Ability to analyze data, troubleshoot issues, and propose effective solutions. Initiative: Proactive attitude towards learning and taking on new challenges. This is an exciting opportunity for an early-career chemist to contribute to cutting-edge projects at DayGlo Color Corporation, supported by the extensive resources and global presence of RPM International.
If you meet the qualifications and are eager to grow in your career, we invite you to apply.
Experience: 0-2 years of relevant experience in the paint and coatings industry, with a focus on pigment dispersion preparation.
Education: Minimum of a bachelor's degree in physical sciences, Chemistry, or a related field.
Technical Skills: Familiarity with laboratory techniques, equipment, and procedures.
Knowledge of formulation principles in the paint and coatings domain is a plus.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2024-04-30 07:07:02
-
JOB DESCRIPTION
DAP is looking to hire R&D Intern for Summer 2024.
Responsibilities:
The summer intern would work under mentorship of a senior scientist / Supervisor to perform collaborative research for development adhesives or repair products with unique and differentiated properties.
This R&D work will include working on • High Performance Water-Based Sealant with extreme weather resistance
Requirements
Major: Chemical Engineering or Chemistry Sophomore, Junior, or Senior. General lab skills (weighing materials on benchtop scale, transferring liquids/solids from one container to another, adherence to lab safety rules). Some organic chemistry knowledge and understanding of material science concepts. Likes to work with hands-on testing in a laboratory setting. Adept with hands-on work, home repair experience is a plus! Attention to details, inquisitive, good notes taker, desire to learn and grow.
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world. At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Baltimore, Maryland
Posted: 2024-04-30 07:07:01
-
JOB DESCRIPTION
Formulate new prods as requested by Mkting, re-formulate current prod lines for improvement, + solve tech scale-up + manufacturing probs by commercializing new or existing tech to support revenue growth + corp profits.
Analyze org + inorg compounds to determine chem + phys properties, composition, structure, relationships, + reactions, utilizing chromatography, spectroscopy, + spectrophotometry techniques.
Maintain lab instruments to ensure proper working order + troubleshoot malfunctions as needed.
Dev, improve, + customize products, equipment, formulas, processes, + analytical methods.
Conduct quality control tests.
Direct, coordinate, + advise personnel in test procedures for analyzing components + phys properties of materials.
Formulate or optimize any coating product in a known technology to meet defined requirements.
Design + conduct feasibility + cost savings studies independently.
Compile + analyze test information to determine process or equipment operating efficiency + to diagnose malfunctions.
Confer with scientists + engineers to conduct analyses of research projects, interpret test results, or develop nonstandard tests.
Write technical papers + reports + prepare standards + specifications for processes, facilities, products, or tests.
Induce changes in composition of substances by introducing heat, light, energy, + chemical catalysts for quantitative and qualitative analysis.
Must have Bach in Chemistry, Materials Science or related field and 5 years real exp with coatings or polymer research, and the following skills (5 yrs exp): characterization skill for polymeric materials, including viscosity, molecular weight, rheology profile, or mech properties; structure-property relationships for designing new polymer materials; and safety protocols and handling hazardous and flammable materials.
Alternatively, may have a Master's in Chemistry, Materials Science or related field and 2 years real exp with coatings or polymer research, and the following skills (2 yrs exp): characterization skill for polymeric materials, including viscosity, molecular weight, rheology profile, or mech properties; structure-property relationships for designing new polymer materials; and safety protocols and handling hazardous and flammable materials.
Any suitable combination of education, training, or experience is acceptable.
Pre-employment background checks and drug screen apply.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin
Posted: 2024-04-29 23:31:46
-
JOB DESCRIPTION
Specific Requirements:
Stage and prepare all raw materials associated with production orders. Makes batches and operates packaging equipment efficiently.
Capable of handling scanner & basic computer operations Maintains orderliness and cleanliness in and packaging areas, with active engagement in positive safety behavior. Communicates inventory levels and/or concerns to supervisory staff. Develops good working knowledge of all production processes. Maintains good working relationship with Quality Control. Must be flexible in job assignments and capable of learning all aspects of the facility. Reports all spills and leaks, equipment malfunctions, safety hazards, accidents, near miss accidents and material shortages to Production Supervisor. When there is downtime on his line, proceeds to line assigned to him by Production Supervisor for further training or operation. Assist in hazardous waste handling when needed under the guidance from production management / supervisors or RCRA certified employees. The above description identifies only the primary duties pertaining to this position.
Additional tasks are performed, as required by supervisory staff, and do not significantly alter this description.
Background Requirements:
High School Diploma with some college level chemistry preferred. Minimum 2 year prior production related experience or 1 year experience as a production batch maker.
Physical Requirements:
Must pass standard eye examination (corrected or uncorrected) and must pass standard color- tone testing. Must be capable of wearing Company standard respirators as qualified by fit test performed by an authorized agency.
Benefits: 401k w/ company match after 6 months, Pension Plan, Medical/Dental/Vision Insurance, flexible schedule, life insurance, tuition reimbursement
Do we have what you are looking for?
We offer competitive pay and health benefits and a safe working environment with a solid history of success and growth.
We encourage hard work, recognition and opportunity.
And we stand behind our 95-year-old Stonhard name and brands. Stonhard is part of RPM, International (NYSE: RPM) is headquartered in Maple Shade, NJ and has more than 95 year of experience manufacturing and installing high performance, seamless floors throughout the world.
We manufacture and install long-term floor, wall and lining solutions to markets including, but not limited to: food & beverage, general manufacturing, pharmaceutical, chemical processing, education, healthcare, government, technology and hospitality. Same Posting Description for Internal and External CandidatesApply for this ad Online! ....Read more...
Type: Permanent Location: Fort Wayne, Indiana
Posted: 2024-04-29 23:18:19
-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and offers constructive criticisms relative to variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Consult with Main Lab chemist on products more than 10% out of product specifications Upon approval of product record data onto Quality Control car and enter information into computer data base Consult QC manual for specific requirements for product analysis of production batches and customers special requirements Calibrate QC equipment as required Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude. Apply for this ad Online! ....Read more...
Type: Permanent Location: Westfield, Massachusetts
Posted: 2024-04-29 23:18:13
-
JOB DESCRIPTION
Specific Requirements:
Stages and prepares all raw materials associated with production batches. Maintains orderliness and cleanliness in batch making area and proper storage of batch area inventories. Communicates low levels of raw materials to the Plant Supervisor. Develops a thorough knowledge of raw material storage tanks, valving and piping, their contents, actuation and directions of flow. Maintains a good working relationship with Quality Control. Must be capable of logical structuring of the batch making process, particularly optimization of mixer usage and efficiency. Reports all spills and leaks, equipment malfunction, safety hazards, accidents, near-miss accidents and material shortages immediately to the Production Supervisor. Acknowledges and understands the hazards and safety precautions required for working with inorganic metal-based powdered pigments and modifies work and hygiene practices accordingly.
The above description identifies only the primary duties pertaining to this position.
Additional tasks are performed, as required, and do not significantly alter this description.
Background Requirements:
High School Diploma with some college level chemistry preferred. Minimum 2 years prior related experience or 1 year experience as a production batch maker. Must pass standard eye exam (corrected or uncorrected) and must pass standard color-tone testing. Must be capable of wearing Company standard respirators as qualified by a fit test performed by an authorized agency.
Physical Requirements:
Lifting up to 50 pounds. Stooping, bending, squatting up to 50% of the time. Standing and walking up to 90% of the time. Sitting - None.
Benefits: 401k w/ company match after 6 months, Pension Plan, Medical/Dental/Vision Insurance, flexible schedule, life insurance, tuition reimbursement
ABOUT US
DO WE HAVE WHAT YOU'RE LOOKING FOR? Our Construction Management Group works closely with our direct US sales team of over 150.
We provide a competitive base salary, bonus package, solid health coverage, 401K and pension plan, plus an expense package including car allowance.
You will also receive on-going training, administrative support, technical service and R&D support along with encouragement, recognition and opportunities for growth.
And we stand behind our 90 year old Stonhard name and our brands.
DO YOU SEE YOURSELF WORKING WITH US? LET'S GET STARTED.
The Stonhard Group is part of RPM, International (NYSE: RPM) is headquartered in Maple Shade, NJ and has more than 95 years of experience manufacturing and installing high performance, seamless floors throughout the world.
We manufacture and install long-term floor, wall and lining solutions to markets including, but not limited to: food & beverage, general manufacturing, pharmaceutical, chemical processing, education, healthcare, government, technology and hospitality. We are proud to be an Equal Opportunity/Affirmative Action Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Maple Shade, New Jersey
Posted: 2024-04-29 23:18:11
-
JOB DESCRIPTION
Responsible for producing (making, cutting, labeling) high-quality floor, wall, lining and specialty samples for use as field sales tools.
Specifically, the technician mixes liquid amines and resins with silica sand in buckets or a blender and then trowels the material onto a sample board to a precise thickness.
Once the sample cures or solidifies, a coating material is applied.
Once the sample passes the final curing process, the technician will cut the sample with a wet saw, sand it on a belt sander and then lay out for final drying process.
Once dry, the technician will label the sample and package for shipment. Arranges for the prompt and efficient distribution of samples. Responsible for policing and cleaning work area, lab, storage room and saw room.The above description identifies only the primary duties pertaining to this position.
Additional tasks are performed, as required, and do not significantly alter this description.
Background Requirements:
High school diploma with college level chemistry. Prior experience in a chemical manufacturing environment. Prior supervisory experience. Apply for this ad Online! ....Read more...
Type: Permanent Location: Cherry Hill, New Jersey
Posted: 2024-04-29 23:18:09
-
JOB DESCRIPTION
Modern Recreational Technologies, is seeking an R&D Chemist.
MRT consists of Pettit, Ramuc, ValvTect and Tuff Coat brands.
Lab work will include developing new product formulations as well as modify existing products and services for its brands.
Document and communicate research and development information with all appropriate associates.
This is an excellent opportunity to join a winning team in the recreational industry.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Learn, understand, and maintain a fundamental knowledge of market, customer, and technology business needs.
Work at translating these needs into products and services that bring quantifiable value to customers and to MRT.
Prepare laboratory coating formulations for project evaluations. Complete full product testing of laboratory coatings produced. Be able to review color and match colors with the assistance of a spectrophotometer. Support production with batch supervision as needed to complete new product launches. Ensure all experiments and technologies comply with safe laboratory practices and standards. Document and communicate opportunities, ideas, results, and issues in a timely manner. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
Minimum Requirements: B.S.
Degree in Chemistry, or Chemical Engineering 3-5 years' experience in the Chemical or Coatings industries. Desired requirements: College degree 3-5 years of lab experience Knowledge and understanding of coatings science and technology Ability to match colors in various paint applications. Understanding of coatings application and testing using ASTM standards, ISO standards, and other standards as necessary Familiar with safe operation and maintenance of laboratory and application equipment Good written and verbal communication skills Strong mathematical skills Good organizational skills No issues working around hazardous materials or smelling paint fumes Computer literate
PHYSICAL DEMANDS
Must be able to sit, stand, bend/stoop, lift, walk, kneel, crouch and climb for extended periods of time as required.
Must have good hearing and vision, including peripheral vision, depth perception, and ability to correctly perceive color.
The ability to lift 25 pounds frequently without assistance and up to 100 pounds with assistance as required.
The employee will have to use a computer.
WORK ENVIRONMENT:
Functions performed primarily in a R&D Lab environment containing some hazardous chemical materials.
KEY PERFORMANCE INDICATORS (KPI)
Project Timelines and Goals Annual Review New product development New Products sales value Wages: From $75,000 - $90,000 per year. Benefits: Upon satisfaction of applicable eligibility requirements, include but are not limited to: medical, dental, vision, life insurance, disability, PTO days, 401(k), employee stock purchase plan, and pension.
ABOUT US
Modern Recreational Technologies "MRT" is the industry leader specializes in developing advanced coatings, additives, and services to support the recreational market segment.
MRT has a rich history of developing excellent technology and providing exceptional customer service to our customers.
The team at MRT is comprised of exceptional, passionate individuals who love the outdoors and are dedicated to creating solutions that maximize the recreational time our customers work hard to enjoy.Apply for this ad Online! ....Read more...
Type: Permanent Location: Greensboro, North Carolina
Posted: 2024-04-29 23:17:40
-
JOB DESCRIPTION
Job Purpose:
Support the R&D team to develop innovative products and formulas, as well as improving the performance of the current portfolio and evaluating existing and new raw materials for performance and cost effectiveness.
Defined Job Responsibilities/Accountabilities:
Responsible for all aspects of product development related to nail polish formulation and working with marketing, sales, customers and suppliers as required. Independent execution of complex product briefs Creates and develops new and improved products, innovative ideas, processes, protocols and techniques to support project objectives and company goals Prepares samples for testing, such as stability, efficacy, and safety Monitors stability of products using approved stability protocols and reformulates as needed Assist with color matching projects as needed Carries out research on assigned technologies and concepts Proactively identifies and evaluates new materials to assess technical performance Designs and conducts studies to assess and understand prototype performance Initiates patent research and applications Stays on top of competitive products and novel technologies Is a technical and problem solving resource Recommends product modifications and process improvements Collaboratively supports other functions of the organization to deliver end to end results Supports the management of product testing including but not limited to consumer and safety testing Supports production in the scale-up of formulas and implementation of action plans to solve technical problems Establish and maintain effective working relationships with co-workers, team members of other departments, and customers. Maintains scientific skills and acquires the skills necessary to assure the quality of the formulations Helps to develop the scientific expertise of the laboratory Follows current Good Manufacturing, Good Laboratory, and Safety Practices Responsible for Data Management and Collection via company specific programs Maintain accurate written records of experiments and work.
Document results of tests, analysis and research activities. Assists in/prepares scientific presentations to colleagues and customers
Qualifications/Skills:
5+ years of relevant industry laboratory experience with proven R&D experience - prior nail formulation or nitrocellulose experience preferred Bachelors Degree or Higher within a technical field (Chemistry, Biology, etc) Ability to prioritize and handle multiple projects within a cross-functional organization Strong technical color expertise, with color matching ability to be able to quickly distinguish and recognize differences in shades Excellent lab processing techniques and data management Experience and expertise with viscosity and rheology preferred Experience in color cosmetic formulations preferred
ABOUT US
Kirker is a custom manufacturer of nail lacquer and nail care treatment products since the 1940's that has evolved into a full turnkey operation.
We are proud to offer our services in filling and packaging from free standing stock to beautifully designed packaging options and displays.
With manufacturing operations in the United States and Europe, we offer the right option to fit each customer's individual requirements.
Kirker offers a full range of services from product development, R&D, production, and quality control, to filling and pack off.
Our cutting-edge expertise, custom formulations, and first-class service have affirmed our leadership position within the industry.Apply for this ad Online! ....Read more...
Type: Permanent Location: Paterson, New Jersey
Posted: 2024-04-29 23:17:14
-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and offers constructive criticisms relative to variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Consult with Main Lab chemist on products more than 10% out of product specifications Upon approval of product record data onto Quality Control car and enter information into computer data base Consult QC manual for specific requirements for product analysis of production batches and customers special requirements Calibrate QC equipment as required Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude. Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2024-04-29 23:16:49
-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and offers constructive criticisms relative to variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Consult with Main Lab chemist on products more than 10% out of product specifications Upon approval of product record data onto Quality Control car and enter information into computer data base Consult QC manual for specific requirements for product analysis of production batches and customers special requirements Calibrate QC equipment as required Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude. Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2024-04-29 23:16:41
-
JOB DESCRIPTION
R&D Scientist position for the Color team requires strong technical knowledge with experience in the practical application of color science theory and color formulation.
Innovation and experience in product/process development is, desired.
This position provides leadership to internal and external color tools, color programs, strategy, research, and development.
The candidate must also possess demonstrated competencies and experiences in project management, documentation, and communication.
Technology Knowledge:
• Experience with Color Science theory and application.
With a demonstrated practical application of concepts.
Required concepts; color formulation, colorimetry(use and mathematics), CIE2000, subtractive color theory, color space navigation, Desired concepts; Kebulka-Munk model, color management, color analysis, palette analysis spectrophotometer, dispersants, pigment, and additive color theory • Ability to prototype, validate, or demonstrate concepts and research.
Knowledge of or willingness to learn with SQL and C#. • Ability to document procedures, processes, and outcome in detail for ultimate technology transfer package generation • Working knowledge of various suppliers for required equipment. • Understanding of DOE and statistical analysis to provide highest quality data
Technical Leadership:
• Action Oriented - ability to make technical decisions as needed for experimental testing and design • Continuous learning and awareness of open literature and competitive landscape, as well as most current developments to leverage • Demonstrated ability to develop and execute project plan - time management, prioritization, managing ongoing progress of project work to completion • Demonstrated ability to regularly communicate status and results with project stakeholders and cross-functional teams • Demonstrates courage through proposed system upgrades and improved technology; always improving
People Leadership:
• Outstanding personal and interpersonal skills - listening, compassion, motivating, inspiring, humor, patience, understanding diversity, negotiating etc. • Energetic, driving and inspiring • Action oriented, perseverance and results driven • Continuous learning/growth and mentorship/teaching skills • Shared knowledge and learnings among coworkers for broader impact to RO
Organization Leadership:
• Ability to work and thrive in cross-functional environment. • Agility to respond to emerging business needs • Using, assessing, or developing organization technology and developing improved technology or processes. • Demonstrate strong technical ambition - potential to become senior technical SME Experience and Education: • Preferred minimum 4-6 years experience primarily doing color application, tool, program, research, testing and/or development • B.S.
Degree in physics, mathematics, chemistry, or related fieldApply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin
Posted: 2024-04-29 23:16:27
-
JOB DESCRIPTION
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Adaptability Competency:
Understands Tremco's core chemistries and formulations of existing products within assigned area of work. Understands causal impact of ingredients and processing compared to performance within area of assigned work. Plans simple experiments and demonstrates ability to relate observations and test variables to test results.
Initiative Competency:
Creates project plans that map out scope of work and committed timelines. Reviews work and results with supervisor and proposes ideas and solutions. Executes tasks and experimentation and project plan.
Resourceful Competency:
Understands and performs key testing protocol to validate product performance. Leverages others knowledge & resources. Interact with adjacent departments to develop understanding and consensus.
Communication Competency:
Maintains laboratory notebook to standard. Write monthly updates and technical reports to supervisor discussing project progression and next steps. Presents work and subject matter internally to R&D.
Collaboration Competency:
Performs tasks and duties as agreed to on, raw material evaluation and product audits. Actively participates in innovation processes Actively participates in departmental initiatives such as weekly meeting, and quarterly training, housekeeping and small k's.
Accountability Competency:
Performs and reports all work consistent with scientific methodology and standards. Performs assignments as agreed upon in project plans and standard work. Report results and adjust priorities to accommodate commitments.
EDUCATION:
Bachelor's degree in either chemistry, biology, physics or chemical engineering.
OTHER SKILLS AND ABILITIES:
Incumbent must work safety within an industrial chemical laboratory.
This includes the safe handling of all chemicals commonly found in industrial labs (acids, bases, oxidizers, reducers, compressed gasses and hazardous materials), the safe operation of all mechanical processing equipment, and the safe operation of physical testing equipment.
The salary range for applicants in this position generally ranges between $58,000 and $73.000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Benefits: Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Commission, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2024-04-29 23:12:28
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America
GENERAL PURPOSE OF THE JOB: Ensures that the assigned revenue, margin and product mix objectives, within the corporate business framework, are met or exceeded.
This is to be accomplished by securing, developing, and managing key architects, designers, general contractors, distributors, subcontractors, and end-user accounts.
This position will also own and manage all related performance and service metrics for the assigned accounts.
ESSENTIAL DUTIES AND RESPONSIBILITIES: Achieves or exceeds assigned sales goals and expectations.
Works primarily with existing accounts, while seeking and developing new account opportunities to influence and increase use of Tremco CPG products in assigned territory.
Manages assigned accounts to establish business development opportunities through account penetration, analysis, partnership with key decision makers, and strategic initiatives.
Drives product specifications and project opportunities throughout assigned territory.
Leverages industry knowledge, marketplace dynamics and key relationships both internally and externally to develop trusted partnerships and advisory relationships with customers with a focus on problem identification, exploration and resolution.
Annually prepares and delivers strategic business/territory plans for each customer with monthly forecasts.
Consistently and efficiently follows the standard sales process to identify prospects and decision makers, gain customer commitment, predict sales probability, and effectively close deals.
Manages day-to-day contact, exchanges information succinctly, truthfully and ethically while addressing issues directly and tactfully in pursuit of mutual interest and benefit.
Develops and delivers technical, high quality and directed digital collateral, product prospectus, presentations, and business correspondence in support of the overall sales process.
Collaborates with senior staff to coordinate and execute product knowledge training sessions with internal and external customers, as appropriate, utilizing supplier representatives.
Leverages all available technology on a daily basis for productivity and effective lead generation, account maintenance, sales and expense tracking, forecasting, account reviews, customer contact, presentations, etc.
Works collaboratively with internal support resources to develop teamwork through cooperation, trust and mutual respect.
Attends and presents business unit products and services at industry conventions and trade shows.
Maintains extensive product knowledge in all product lines and service offerings.
Adheres to and enforces all company policies, pricing, and operational procedures with special attention to the professional image of the company.
Performs other related duties as required, requested or assigned.
EDUCATION
Bachelor's Degree in Business, Sales, Construction Management and 2-3 years of construction or industry experience OR Minimum High School Diploma or GED with 5 years of construction or industry experience
EXPERIENCE
Two to four years related experience and/or training Construction knowledge (i.e., waterproofing, air barriers, framing, modular, etc.) Assembly line related product segments Basic knowledge of product chemistries
OTHER SKILLS AND ABILITIES:
Ability to travel extensivelywithin assigned territory.
Must be well organized,self-motivated, with outstandingwritten and verbalcommunication skills Proficient with Microsoft Office Suite (Word, Excel, PowerPoint) Salesforce.com or other CRM software experience preferred Possess a professional curiosity to figure out how things work or are put together Ability to retain knowledge and training Proven ability to understand, use, and manage your own emotions in positive ways to relieve stress, communicate effectively, empathize with others, overcome challenges and diffuse conflict.
Demonstrates self-awareness and emotional self-control through adaptability, achievement orientation, and a positive outlook.
Accepts and utilizes feedback effectively.
Reads an audience and adjust style and approach accordingly.
Excellent written and verbal communication skills Strong presentations skills Excellent interpersonal and organizational skills Ability to build relationships and deliver exceptional customer service.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, kneel, talk, hear, and lift up to 25 lbs.
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally starts at $85K and goes up based on experience.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran statusApply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Ohio
Posted: 2024-04-29 23:10:31
