-
Power Supply Design Engineer
Are you an experience Power Supply Design Engineer with a strong background with Switch mode power supply design? Would you like to join an ambitious and growing Engineering business putting their staffs progression at the top of priorities? If so, this could be the role for you!
Our client provides rugged power system designs and products for harsh environments, predominantly aerospace and defence.
The successful applicant for this Power Supply Design Engineer job based in Hertfordshire will be responsible for:
Design and Develop SMPS: Create efficient switched-mode power supplies, including component selection and circuit design.
Simulation and Testing: Perform simulations and prototype testing to validate and troubleshoot designs.
Ensure Compliance: Meet industry standards and regulatory requirements, including EMC and safety.
Technical Documentation: Generate schematics, layout designs, and test reports.
Cross-Functional Collaboration: Work with hardware, firmware, and manufacturing teams for project integration.
To apply for this Hertfordshire based role you must have a combination of the following skills and experience:
Bachelor's degree or higher in Electrical Engineering or related field
Proven experience in switch mode power supply design and development
Strong knowledge of power electronics, analogue and digital circuits, and electrical components
Proficiency in using design software and tools such as MATLAB, SPICE, and Altium PCB
To apply for this Power Supply Design Engineer job based in Hertfordshire, please send your CV to NDrain@redlinegroup.Com or call 01582878837/07961158760 to speak to Nick ....Read more...
Type: Permanent Location: Hitchin, England
Start: ASAP
Salary / Rate: £45000 - £65000 per annum
Posted: 2024-10-30 09:18:19
-
Materials Engineer
Structural seals, Elastomers, Material Science
Global leader in Aerospace is looking for a Materials specialist to join their Materials and Process Engineering team in Bristol area.
You will be responsible to develop structural seals and elastomer compounds, testing and demonstrating the performance of those materials.
You will also build and maintain stakeholder networks across various departments within the organization.
Candidate requirements:
A degree in Chemical or Material Engineering.
Extensive experience working with structural seals and elastomer compounds.
Showcase leadership and networking skills. ....Read more...
Type: Permanent Location: Bristol, England
Start: ASAP
Duration: Permanent
Salary / Rate: £34000 - £42000 Per Annum None
Posted: 2024-10-29 13:29:47
-
Holt Executive is proud to partner with a leading company in the aerospace industry based in Brighton, which specialises in high-performance electro-mechanical systems and advanced pneumatic technology.
They focus on developing innovative solutions for airborne weapon carriage and release systems within the Mission Avionics and Release Systems sectors.
They are seeking a Mechanical Inspector to be responsible for inspecting precision components from in-house manufacturing and assembly, as well as from subcontractors and suppliers.
You will create and run CMM programs using PC-DMIS for both new and legacy components, ensuring accuracy and quality.
Additionally, you will develop and update CMM setup and operation instructions for new and modified programs to maintain high standards throughout the processes.
Key Responsibilities for the Mechanical Inspector:
- Inspect precision components from internal manufacturing and assembly, as well as from subcontractors and suppliers.
- Develop, prove out, and execute CMM programs using PC-DMIS for both new and existing components.
- Create and update setup and operation instructions for CMM programs, including adjustments for modified programs.
- Conduct first-off inspections.
- Perform First Article Inspection (FAI) reporting for single-level parts and complex multi-level assemblies.
- Update and maintain all documentation related to inspection procedures.
- Communicate with subcontractors and suppliers as needed.
- Conduct source inspections, including Vendor Assessment Surveys (VAS) at supplier locations.
- Perform patrol inspections of manufacturing areas to ensure ongoing compliance.
- Raise Non-Conformance Reports (NCRs) and prepare dimensional reports as required.
- Carry out calibration duties, including calibrating mechanical and electrical equipment and managing related quotations and purchase orders, with full training provided for these tasks.
Key Skills and Experience Required by the Mechanical Inspector:
- A recognised Mechanical qualification and previous relevant experience of mechanical inspection.
- Experience & understanding of different inspection techniques.
- Experience in using precision measuring equipment.
- Good working knowledge & experience of ISO 9001:2001 and ideally AS9100 Rev D.
- Manufacturing experience (mechanical).
- Ability to interpret Engineering Drawings.
- Ability to interpret engineering drawing tolerancing including Geometric Tolerancing.
- CMM programming & operation preferably with experience using PC-DMIS software.
Company Benefits:
- Half-day finish on a Friday.
- 25 days holiday per year (plus bank holidays), increasing with long service and with the opportunity to buy/sell up to 5 days.
- Private medical insurance with optional family cover.
- Pension scheme of up to 7% employer contribution.
- Life Assurance 4x salary (flexible up to 10x).
- Group income protection.
- Flexible opt-in extras such as a health care cash plan, dental insurance, gym membership, critical illness cover and cycle-to-work scheme.
- Employee assistance program providing mental health and wellbeing support.
Security Clearance Requirements:
Due to the nature of our work, many roles require UK nationality and the ability to obtain security clearance.
Applicants must also have the right to work in the UK to be eligible for employment.
If your skills and experience match this exciting Mechanical Inspector opportunity, we encourage you to apply now!
'' ....Read more...
Type: Permanent Location: Brighton,England
Start: 29/10/2024
Salary / Rate: £35000 per annum
Posted: 2024-10-29 08:54:07
-
An exciting opportunity has arisen for a Mechanical Design Engineer to join this innovative and successful company, who develop a range of products for varying industries, which could include consumer electronics, Aerospace, Automotive and IOT to name a few!
The successful Mechanical Design Engineer based in Newbury, Berkshire, will work with a market leading design team, whose focus is on developing the best products in the market.
The ideal Mechanical Design Engineer, based in Newbury, Berkshire will be responsible for:
Working closely with engineering staff to produce mechanical designs, including electronics housings, test equipment and production jigs and fixtures.
Using CAE design tools such as SolidWorks to produce engineering information, such as 3D models, assembly drawings and detailed manufacturing drawings.
Maintaining and updating engineering drawings and documentations on projects.
Applying Geometric Tolerances and dimensions in the production of detailed manufacturing information.
Using simulation, analysis and hand calculations, in order to verify engineering designs.
The ideal Mechanical Design Engineer will have the following skills / experience:
Qualified to degree level in Mechanical Engineering or demonstrate equivalent experience.
Provable experience of product development in an industrial setting.
A strong background in 3D CAD design.
Ideally using SolidWorks, but any mainstream 3D CAD package experience is acceptable.
Electro-mechanical packaging / enclosure design.
Design calculations from engineering fundamentals.
Some exposure to stress analysis (FEA) would be beneficial but not essential.
This is an exciting opportunity to joining a rapidly growing, forward thinking Electronics Innovation company who have recently moved into a state of the art facility with fully equipped labs!
APPLY NOW for the Mechanical Design Engineer, based in Newbury, Berkshire, by sending your CV and Cover letter to ltemple@redlinegroup.Com or contact me on 01582 878820 / 07961 158 785. ....Read more...
Type: Permanent Location: Newbury, England
Start: ASAP
Salary / Rate: £40000 - £55000 per annum
Posted: 2024-10-28 16:07:49
-
Supply Chain Manager
12 Month Contract - Stevenage - Upto £45.00 per hour
Overview of Department:We are a dynamic and growing Electronics Engineering team dedicated to delivering complex and cutting-edge projects.
Our collaborative approach ensures we meet our project goals while maintaining a high standard of quality.
As a part of our team, you will play a key role in driving our projects forward, contributing to our growth, and influencing our strategic direction.
Role Overview:As a Supply Chain Project Manager, you will be responsible for managing the entire lifecycle of external work packages, from initial tendering to final delivery.
You will oversee the technical specifications, engage with suppliers, and ensure projects are delivered on time, within budget, and to the highest quality standards.
The role involves working on highly complex electronics equipment, requiring a deep understanding of engineering and project management principles.
You will have the opportunity to shape project delivery strategies, working closely with a cross-functional team to achieve shared goals.
Key Responsibilities:
End-to-End Project Management: Take ownership of supply chain projects, managing all stages from conception and initiation through to design, development, manufacture, qualification, and delivery.
Technical Specifications and Tendering: Define technical requirements, create detailed work package specifications, and manage the tendering process to ensure the selection of suitable suppliers.
Supplier Management: Build and maintain strong relationships with suppliers, ensuring they deliver to the required standards of time, cost, and quality throughout the project lifecycle.
Risk and Issue Management: Identify, monitor, and mitigate risks and issues that may affect project delivery, implementing corrective actions where necessary to keep projects on track.
Collaboration and Stakeholder Management: Work closely with internal teams, including engineering, manufacturing, quality assurance, and procurement, to align project objectives and resolve any technical or logistical challenges.
Monitoring and Reporting: Track project progress, managing schedules, budgets, and resources to meet project milestones.
Regularly report on status, risks, and opportunities to stakeholders.
Quality Assurance: Ensure that all work packages adhere to the company's quality standards and customer requirements, overseeing testing, validation, and certification activities where needed.
Continuous Improvement: Actively contribute to the refinement of project management processes and supply chain strategies, seeking opportunities to enhance efficiency and effectiveness.
Skills and Experience Required:We are looking for a driven and committed individual with the following qualifications and skills:
Project Management Experience: Proven experience managing projects from inception to delivery, ideally within the electronics engineering or manufacturing sector.
Tendering and Supplier Management: Strong background in tendering processes and supplier management, with experience in negotiating contracts and managing supplier performance.
Electronics Engineering Background: Understanding of complex systems or electronic units, with the ability to comprehend technical specifications and ensure they are met by suppliers.
Lifecycle Management: Familiarity with managing projects across all phases, including concept, development, manufacture, qualification, and customer delivery.
Communication and Negotiation Skills: Excellent communication skills, with the ability to influence stakeholders, negotiate with suppliers, and present project updates to management.
Organizational Skills: Highly organized, with a keen eye for detail and a strong sense of ownership over the delivery of work packages.
Problem-Solving Ability: Proactive in identifying potential issues and implementing solutions to maintain project momentum.
Desirable Skills and Qualifications:
Engineering Qualification: Degree or equivalent qualification in engineering, electronics, supply chain management, or a related field.
Project Management Certification: A formal project management certification such as PRINCE2, PMP, or Agile is advantageous.
Experience in Defence or Aerospace Industries: Familiarity with industry-specific standards, regulations, and quality requirements is a plus.
Continuous Improvement Techniques: Experience with Lean, Six Sigma, or similar methodologies for process improvement.
Why Join Us?
Be a key player in a growing team, influencing the delivery strategy of complex projects.
Gain experience in managing advanced electronics engineering projects with high visibility.
Work in a collaborative environment that values innovation and continuous improvement.
Opportunities for career growth and development in project and supply chain management.
Apply Today or Call Kirsty ....Read more...
Type: Contract Location: Stevenage, England
Start: January 2025
Duration: 12 months
Salary / Rate: £40.00 - £45.00 per hour
Posted: 2024-10-28 13:49:06
-
Holt Executive are currently partnered with a global leader in Space Sustainability, a dynamic and rapidly growing technology and engineering innovator who are making hugely positive contributions to tackle the growing problem of space debris, making space and our orbits safer for future generations.
They require a GNC Systems Team Lead to lead the overall design and verification of the Guidance, Navigation, Computer Vision, and Control subsystem for future missions.
The GNC systems require both standard and bespoke GNC & Computer Vision algorithms and hardware, which need to be integrated together and with the wider satellite bus.
This is cutting- edge, very complex, innovative and forms some of the companys most important intellectual property.
Visa sponsorship and relocation package can be provided.
Responsibilities for the GNC Systems Team Lead:
- Drive development of GNC systems (requirements, FDIR, V&V strategy etc.) ensuring integration of GNC algorithms, Computer Vision algorithms and GNC Hardware for missions.
- Drive the logical integration of the technical GNC subsystem work packages, including subsystem development and verification plans.
- Collaborate with other engineering disciplines in the planning, design and development of mission/system to ensure required GNC subsystem performance and compatibility.
- Plan and execute GNC subsystem verification and test activities.
- Drive GNC subsystems review gates and contribute to mission review gates.
- Conduct state-of-the-art research into GNC (hardware and algorithm) designs and perform subsystem level design and trade-off analysis.
- Support GNC algorithm development for missions.
- Support development of GNC software architecture, with designs leading towards an overall GNC software solution.
- Liaise with customers and/or suppliers to characterize GNC system constraints/requirements, identify and/or present the technical GNC solution.
- Lead the team to deliver GNC related specifications, analysis, and verification activities.
- Mentoring the team and providing expert technical feedback.
Experience required by the GNC Systems Team Lead:
- Masters degree in aerospace engineering or another relevant engineering/science discipline.
- 5+ years relevant experience in a GNC related field.
- Hands on experience of most of the following:
- Development of GNC systems
- GNC requirement derivation and verification
- Design and implementation of control laws and navigation algorithms.
- Theoretical knowledge of guidance strategies for RPO missions.
- Translating algorithms into operational flight software.
- GNC hardware integration and test
- Previous experience in leading commercial engineering teams.
- Matlab/Simulink development skills (desirable).
- C/C++ software development and/or Embedded software development skills (desirable).
Benefits
- Opportunity to work with a highly talented, diverse & dynamic international team with cutting edge technology.
- 9/75 work pattern (optional).
- Flexible working around core hours in a friendly and supportive environment.
- Hybrid working available.
- 25 days holiday (increasing yearly up to a maximum of 28 days) + 8 days Bank Holiday.
- Life insurance and long-term sick pay.
- Private healthcare.
- Visa sponsorship and relocation package considered.
If your skills and experience match this GNC Systems Team Lead opportunity, we encourage you to apply now! ....Read more...
Type: Permanent Location: Oxford,England
Start: 28/10/2024
Salary / Rate: £60000 - £92000 per annum, Benefits: Hybrid/Flexible working, 9/75 work pattern, Private Healthcare, & more
Posted: 2024-10-28 09:37:03
-
A position for a RF Engineering Director role based in Milton Keynes, Buckinghamshire has just become available, offering a fantastic 9-day working fortnight!
We are currently recruiting on behalf of a global-leading design and manufacturing business involved with RF / Microwave devices that are predominantly marketed into the space, aerospace, and defence sectors.
The RF Engineering Director job will be responsible for spearheading the design, development, and deployment of next-generation RF technologies, products and systems driving the company forward.
Ideal candidates for the RF Engineering Director job will have design and development experience in the following areas:
Leading and developing a high performance team of Engineers, with continuing to push innovation and collaboration
Leading the direction of the companies RF projects ensuring successful handover from concept to production in a fast pace environment
Deep expertise in RF design at system level
This is a fantastic opportunity for a RF Engineering Director to join a well-established Milton Keynes, Buckinghamshire based R&D team that have recently moved into brand new, purpose built offices in Milton Keynes, working with high level, like minded Engineering professionals.
To apply for this RF Engineering Director role in Milton Keynes, Buckinghamshire, please contact Tom Drew on 01582 878848 or 07961 158762 or email TDrew@redlinegroup.Com.
Otherwise, we welcome conversation regarding similar positions in Engineering. ....Read more...
Type: Permanent Location: Milton Keynes, England
Start: ASAP
Salary / Rate: £100000 - £110000 per annum
Posted: 2024-10-25 15:42:00
-
TIG Welder
TIG Welder Salary: £16-19 ph
This role requires the permanent right to work in the UK, applications without this will be automatically rejected, thank you.
The Company
A successful and growing company based in Poole, specialising in high-quality welding, fabrication, and assembly for industries where precision is essential, including aerospace, defence, and marine.
Known for their attention to detail, they work to tight tolerances that meet the demands of these critical fields.
The team enjoys a clean, spacious, and well-lit facility designed to provide a safe and comfortable working environment.
On top of that, they're busy and expanding, which means theres always exciting, high-stakes work to keep you engaged and challenged.
TIG Welder Role & Responsibilities
- A proven background in TIG Welding
- Excellent fabrication skills
- Experience working with thin gauge material
- Comfortable welding stainless steel & aluminium
- Mon Fri on days with an early finish on a Friday
- £32-£38k salary (depending on experience)
- Full-time, permanent position
How to Apply for the TIG Welder Position
Apply now or call/message Hayden at Holt Engineering on 07955 081 482 for more information on the TIG Welder role. ....Read more...
Type: Permanent Location: Poole,England
Start: 25/10/2024
Duration: 0.0 MONTH
Salary / Rate: £32000 - £38000 per annum
Posted: 2024-10-25 09:36:08
-
We are seeking a results-driven and dynamic Bid Manager to lead and manage high-value bids within a market-leading company, known for the innovation of advanced integrated systems across the Defence, Security and Aerospace markets.
The key focus of this role is to ensure the timely submission of high-quality, winning bids for both new and existing customers.
This is an excellent opportunity for someone experienced in bid management, especially in the defence industry, who is ready to contribute to growing success.
Key Responsibilities:
- Lead the submission of high-quality bids and commercial offers to new and existing customers.
- Ensure end-to-end ownership of bids, applying due diligence throughout the process.
- Collaborate with the Sales lead to contribute to and enhance the overall Win Strategy.
- Ensure clear capture and understanding of customer requirements, developing strong win themes.
- Align bid objectives with company strategy while balancing customer satisfaction and priorities.
- Create and manage comprehensive bid plans.
- Lead and motivate multi-disciplinary bid teams, ensuring accurate input from various functions.
- Oversee proposal management, ensuring professional, visually appealing, and compliant documents.
- Provide editorial supervision and copywriting support for proposals
Skills & Experience:
Essential:
- Proven experience in leading winning bids in the defence industry.
- Skilled in motivating and managing multi-disciplinary teams.
- Experience managing bids valued at over £1M.
- Financial literacy and copywriting experience.
- Strong ability to work under pressure and manage multiple simultaneous bids.
- Customer-centric mindset, able to interpret and respond to customer challenges.
- Strong ethical standards and integrity.
Desirable:
- Knowledge of UK, European, and international defence markets.
- Shipley bid management training and certification.
- Proficiency in Microsoft Project.
Work-Life Balance & Benefits:
- 37.5-hour working week with lunchtime finishes on Fridays.
- Hybrid/flexible working arrangements.
- 28 days annual leave and Christmas closure.
- Group pension plan matched contributions up to 5%.
- Income protection scheme and Employee Assistance Programme.
- Life assurance policy, including bereavement counselling.
- Company shares incentive plan and save as you earn scheme.
- Electric vehicle salary sacrifice scheme.
- Wellbeing initiatives and support, including mental health resources.
Security Clearance Requirements:
Due to the nature of our business, our staff need to be able to obtain UK Security Clearance as a mandated requirement.
Therefore, if successful, you will need to provide proof of identity, employment history and right to work in the UK, along with proof of UK residency for at least five years
How to Apply:
If you are a dynamic, results-driven individual with experience in bid management and are looking to join a supportive and innovative team, wed love to hear from you! Please submit your CV by clicking Apply! ....Read more...
Type: Permanent Location: West Sussex,England
Start: 25/10/2024
Salary / Rate: £42000 - £48000 per annum
Posted: 2024-10-25 08:29:04
-
Holt Executive are partnered with a global aerospace technology innovator, who provide advanced defence and commercial technologies to aerospace, aviation, land and sea, delivering solutions that meet customers mission-critical needs.
From their site in Brighton, the company specialise in high performance electro-mechanical systems and pneumatic technology for use in aerospace and aviation.
They require a Senior Safety Engineer to join the Mission Avionics team.
The appointee will lead the delivery of system safety related activities, engaging, coordinating and delivering against the needs of the business projects, ensuring that strategic and legislative requirements are fulfilled.
Responsibilities for the Senior Safety Engineer:
- Preparation of Safety Management Plans.
- Support System Engineering in development of product specification for safety.
- Contribute to and provide evidence to support product Certificate of Design release.
- Support to ongoing airworthiness and safe-life assessment for in service products.
- Compile Safety, Assessments and Cases and ALARP statements.
- Conduct and Compile Failure Modes Effects and Criticality Analyses, Compile Functional Failure Analyses & Fault Tree Analyses and Conduct System Safety Hazard Analysis.
- Maintain a Hazard Log.
- Provide advice and recommendations to Airworthiness and Design Signatories.
- Chair Safety & Hazard Review Boards.
Experience and Skills Required by the Senior Safety Engineer:
- Degree qualified in Engineering or equivalent relevant work experience.
- 7+ years experience in a similar role.
- Familiar with UK safety legislation.
- Understanding of Reliability and Maintainability Analyses.
- Requirements Management, Verification Planning & Certification.
- Use of IBM Doors.
- Manage ILS (Integrated Logistics Support) / IPS (Integrated Product Support) solutions for:
- Product support management
- Design interface
- Maintenance planning and management
- Packaging, Handling, Storage and Transportation (PHS&T)
- Support Equipment
- Technical Publications.
Company Benefits:
- 38 hour working week with flexible working, and half day finish every Friday.
- 25 days holiday per year (plus bank holidays), increasing with long service, and buy/sell options.
- Private medical insurance with optional family cover.
- Pension scheme of up to 7% employer contribution
- Life Assurance 4x salary (flexible up to 10x)
- Group income protection.
- Flexible opt-in extras such as health care, dental insurance, gym membership, critical illness cover and cycle-to-work scheme.
- Employee assistance program providing mental health and wellbeing support.
If your skills and experience match this Senior Safety Engineer opportunity, we encourage you to apply by sending your CV now! ....Read more...
Type: Permanent Location: Brighton,England
Start: 25/10/2024
Salary / Rate: Competitive
Posted: 2024-10-25 08:23:09
-
An exciting opportunity has arisen for a Hardware Design Engineer - Digital/Analogue based in Kent to join this world leader in Photonic Engineering and Manufacturing Services.
Operating globally this Hardware Design Engineer - Digital/Analogue will be based at their UK Centre of Excellence in Kent and join their dynamic, multidisciplined engineering team working on cutting edge imaging and sighting systems for Aerospace & Defence and Life Sciences.
You will lead the development of electronic solutions for a range of electro-optical products utilising FPGA, digital and analogue hardware and software.
Hybrid working available.
Sponsorship opportunities for the right candidate.
Key skills and experience required for Senior Hardware Design Engineer - Digital/Analogue/Firmware:
Significant experience with digital / analogue signal processing (DSP)
Full design cycle experience
Schematic capture and PCB Layout
Firmware development experience - Embedded programming, C, FPGA / VHDL
Ideally qualified to a degree level in a related discipline
This is a unique opportunity to join a leader in their market who can offer the opportunity for career progression and personal development.
To apply for Hardware Design Engineer - Digital/Analogue, based in Kent, please send your CV and covering letter to skuttan@redlinegroup.Com, or for more information contact Sophie Khuttan on 01582 878817. ....Read more...
Type: Permanent Location: Folkestone, England
Start: ASAP
Salary / Rate: £35000 - £50000 per annum
Posted: 2024-10-25 00:00:02
-
CNC Turner
Location: Gosport, Portsmouth
Salary: £16-18 per hour (dependent on experience)
Shift: Day shift, 39 hours per week
CNC Turner Overview:
We are seeking a competent CNC Turner to join our clients team near Gosport, Portsmouth.
The company operates as a small subcontractor for multiple markets including Aerospace, Motorsport and Oil & Gas.
The ideal candidate will have experience setting and operating Fanuc controlled lathes in a precision engineering environment.
CNC Turner Responsibilities:
- Setting and operating Fanuc controlled lathes
- Working with various alloys and materials
- Performing tool changes and offsets accurately
- Ensuring high-quality output and adherence to specifications
- Collaborating with the team to meet production deadlines
CNC Turner Requirements:
- Proven experience as a CNC Turner
- Proficiency in operating Fanuc controlled lathes
- Strong understanding of offsets and tool changes
- Ability to work with precision and attention to detail
- Excellent problem-solving and troubleshooting skills
How to apply for the CNC Turner role:
Please either Apply directly on contact Harry on 07739 277675 or at harry.parsons@holtengineering.co.uk ....Read more...
Type: Permanent Location: Gosport,England
Start: 24/10/2024
Salary / Rate: £16 - £18 per hour
Posted: 2024-10-24 15:51:11
-
Are you a Systems Engineer - Electronics looking for a new role based in Bedford?
My client are leaders in their field with a significant global presence and specialise in electronic enclosures and systems for critical industries, Aerospace and Defence, who are seeking a Systems Engineer - Electronics based in Bedford to join their team.
Key responsibilities for the Systems Engineer - Electronics based in Bedford:
Design of high-reliability, rugged systems for demanding aerospace and commercial applications.
Electrical / Electronic design including backplanes, power supplies and interface controls.
Liaising with customers to ensure compliant product design within timescales and on budget.
Generation of schematics, manufacturing data, bills of materials and specifications.
Generation of test and compliance documentation (test instructions, compliance matrices and verification documentation)
Maintaining and recording project data to ensure accurate records of design decisions, selections and changes during the design process.
Experience of the following would be an advantage for the Systems Engineer - Electronics based in Bedford
Awareness of military standards (DEF STD and MIL STD) for equipment
Knowledge of EMC and / or environmental test methods and procedures
Knowledge of UKCA / CE, RoHS and WEEE directives (EN60950 / EN62368)
Experience of working with CAD Software
APPLY NOW for the Systems Engineer - Electronics based in Bedford by sending your CV to SKhuttan@redlinegroup.Com or call on 01582 878817/ 07961 158586 quoting SKK1128.
We always welcome the opportunity to discuss other engineering jobs. ....Read more...
Type: Permanent Location: Bedfordshire, England
Start: ASAP
Salary / Rate: £35000 - £50000 per annum
Posted: 2024-10-24 09:33:01
-
CNC Turner
CNC Turner Salary: £14-19
*Please only apply if you have the permanent right to work in the UK.
Unfortunately, applications without this will be automatically rejected
*
The Company
Specialising in the design and manufacture of high-precision tools and equipment for the aerospace, defence & commercial sector.
They create customised solutions that support global airlines with everything from ground handling to aircraft maintenance.
With a dedicated team and global reach, they pride themselves on delivering reliable, innovative products and services that ensure safety and efficiency for airlines and aviation maintenance providers.
CNC Turner Roles (2)
- CNC Turner Programmer
- CNC Turner Setter/Operator
CNC Turner Responsibilities
- Program multi-axis CNC Mill/Turns from scratch or
- Set & run CNC Lathes.
- Comfortable working with Fanuc controls.
- Able to work from technical drawings.
- A history in the aerospace, defence, nuclear or similar industry would be great.
- Perform first-off inspections.
- Experience with live/driven tooling is necessary for the CNC Turner Programmer level.
How to Apply for the CNC Turner Position
Apply now or call/message Hayden at Holt Engineering on 07955 081 482 for more information on the CNC Turner role. ....Read more...
Type: Permanent Location: Poole,England
Start: 24/10/2024
Salary / Rate: £28000 - £38000 per annum
Posted: 2024-10-24 09:29:07
-
CNC Turner
Location: Gosport, Portsmouth
Salary: £16-18 per hour (dependent on experience)
Shift: Day shift, 39 hours per week
CNC Turner Overview:
We are seeking a competent CNC Turner to join our clients team near Gosport, Portsmouth.
The company operates as a small subcontractor for multiple markets including Aerospace, Motorsport and Oil & Gas.
The ideal candidate will have experience setting and operating Fanuc controlled lathes in a precision engineering environment.
CNC Turner Responsibilities:
- Setting and operating Fanuc controlled lathes
- Working with various alloys and materials
- Performing tool changes and offsets accurately
- Ensuring high-quality output and adherence to specifications
- Collaborating with the team to meet production deadlines
CNC Turner Requirements:
- Proven experience as a CNC Turner
- Proficiency in operating Fanuc controlled lathes
- Strong understanding of offsets and tool changes
- Ability to work with precision and attention to detail
- Excellent problem-solving and troubleshooting skills
How to apply for the CNC Turner role:
Please either Apply directly on contact Harry on 07738 277675 or at harry.parsons@holtengineering.co.uk ....Read more...
Type: Permanent Location: Gosport,England
Start: 23/10/2024
Salary / Rate: £16 - £18 per hour
Posted: 2024-10-23 16:04:06
-
A global Chemical Manufacturer, renowned for its cutting-edge product development and innovative solutions, is on the lookout for a dedicated SHE Advisor to join their dynamic team at their site in the Blackpool area!
About the Company: They are a world leader in supplying smarter and more sustainable manufacturing solutions across diverse sectors, including technology, aerospace, automotive, energy, oil and gas, medical, and more.
Their commitment to excellence means that every day presents new and exciting challenges as a SHE Advisor!
Annual Salary and Benefits Package
Annual Salary up to £55,000
37 Days Annual Leave (Inclusive on Bank Holidays)
Up to 14% Employer Pension Contribution
Private Medical Insurance
Discretionary Annual Bonus
Death In Service x 4 Salary
Travel Expenses Paid (Including Mileage)
Key Role of the SHE Advisor
The role of the SHE Advisor is to ensure compliance to company standards and legislation across the facilities and to drive continuous improvement culture.
The SHE Advisor will be supporting the following areas of the business; Industrialization, Quality Control, Medical, research & Development, Engineering Maintenance, Warehouse and Offices.
You will also be responsible for other sites across the UK.
Responsibilities
To ensure all accidents and incidents are reported to the HSE under RIDDOR, EA and wider business.
Providing site level SHE support for related matters.
Act as an influential leader to embed the intervention culture of the plant and to coach peers.
Attend any facility SHE Meetings to promote matters.
To establish SHE self-assessment audit programmes.
Support site safety reviews, inspections, audits and accident an incident investigations.
Essential Criteria for the SHE Advisor
NEBOSH Diploma
Experience of working with external stakeholders and regulators
Manufacturing experience
Issuing EA Permits
Worked in highly hazardous areas (COMAH)
IOSH Membership
Apply now: To apply for the position of SHE Advisor, please submit your CV direct for review!
....Read more...
Type: Permanent Location: Blackpool, England
Start: ASAP
Salary / Rate: £40000.00 - £55000.00 per annum + Bonus, 37 Holidays, 14% Pension
Posted: 2024-10-23 12:08:40
-
My Client a leading global provider of high-quality solutions in avionics, systems, and engineering services for the aerospace and defence sectors.
Our products and services are recognised worldwide for their innovation, reliability, and performance.
As a Manufacturing Engineer (AME), you will take ownership of the manufacturing engineering process, leading improvement initiatives and ensuring product integrity.
You will collaborate with cross-functional teams to ensure smooth operations and high-quality production.
Key Responsibilities
- Continuous Improvement: Develop strategies to drive product and process enhancements, ensuring consistent product integrity.
- New Product Introduction: Support the development and launch of new products in line with industry-standard processes.
- Prototype Management: Lead the creation of prototypes for validation, ensuring adherence to quality standards.
- Defect Resolution: Address and resolve defect issues promptly to maintain manufacturing efficiency.
- Cross-functional Collaboration: Work with product engineers, operations, and quality teams to manage production activities.
- Productivity Improvement: Plan and implement site-level initiatives to boost productivity, including machining programme writing, fixture design, and verification.
- Supplier & Customer Relations: Communicate with suppliers and customers to improve product quality and on-time delivery.
Skills and Requirements
- Technical Expertise: Extensive knowledge of products and processes in manufacturing.
- Engineering Background: Proven experience in mechanical, electrical, or manufacturing engineering.
- Continuous Improvement: Experience leading and participating in continuous improvement initiatives.
- PFMEA Knowledge: Familiarity with Process Failure Mode and Effects Analysis (PFMEA) is desirable.
- Communication Skills: Strong written and verbal communication abilities.
Mandatory RequirementsThis role is subject to BPSS (Baseline Personnel Security Standard) screening, which includes:
- Proof of right to work in the UK
- Criminal records check (UK DBS)
- Drugs screening
If you are looking for your next contract role then please apply or call Ian at Holt Engineering on 07734406996 ....Read more...
Type: Contract Location: Yeovil,England
Start: 23/10/2024
Duration: 1.0 HOUR
Salary / Rate: £24.27 per hour
Posted: 2024-10-23 10:04:05
-
Electronics System Engineer
FPGA, PCB, Power Electronics, Electronics Design, DC Motors
I have an exciting opportunity for an Electronics Engineer to join a Aerospace company.
This roles is responsible for application and managing electronic systems skills across a multifunctional Engineering team to support New Product Introduction, New technology Development etc.
You will be responsible to develop, build and test electronics devices pertaining to the requirements of the projects.
Role Requirements
Degree in Electronics Engineering
Experience working with Electronics Hardware Design.
Knowledge and experience working with PCBs.
Familiarity with Power Electronics, DC motors, Power Supply Design.
Hands on Experience working with FPGAs ....Read more...
Type: Permanent Location: Wolverhampton, England
Start: Immediate
Duration: Permanent
Salary / Rate: £40000 - £60000 Per Annum None
Posted: 2024-10-22 14:22:43
-
CNC Turner
Machined Metal Components
Precision Engineering / Aerospace Industry
Nuneaton - CV13
Salary based on experience
Training Provided
Days - 12 Hour Shifts
Are you an experienced CNC Operator or CNC Turner within the Aerospace or Precision Engineering industry? Would you like to work for a family-owned business that is growing?
Our client is a leading component manufacturer that works with a wide range of metal materials and produces parts for the Aerospace industry.
They are looking for a new CNC Turning Machine Operator to join their growing team.
Commutable from Nuneaton, Hinckley, Coalville, Measham and Tamworth.
The Role of CNC Operator:
- Operating CNC Turning / lathe machines
- Producing long runs / batch work
- Working on Fanuc-based controls
- Working from drawings
- Working to tight tolerances
- Quality checking parts using various hand tools
- Maintaining machinery, removing swarf and routine oiling/greasing etc
- Working independently and as part of a team
Minimum Skills / Experience Required - CNC Turner:
- Experience operating CNC turning machines
- Able to quality check own parts
- Ability to work from engineering drawings
- Keen to learn new skills and develop
- Motivated and excellent team player
- Able to commute to the CV13 area
The Package - CNC Operator:
- Starting salary depending on experience
- Days, 12 hour shifts, 6-6
- 25 Days Holiday plus Bank Holidays
- Training and progression opportunities
- Pension
- Free Eye Test
- Medical Scheme and Life Assurance
Interested? To apply for this CNC Turner Operator position, here are your two options:
1.
"This is the job for me! When can I start?" - Call 0116 2545411 now and lets talk through your experience.
Ask for Nilam between 8.30am - 5.30pm.
2.
"I think I'm right for this position, but I'm not sure I have enough to get an interview" - Click "apply now" so I can read your CV and let you know
PPDEL ....Read more...
Type: Permanent Location: Cadeby,England
Start: 22/10/2024
Salary / Rate: £28000 - £32000 per annum, Benefits: 33 days holiday. Free Eye Test. Medical Scheme. Life Assurance
Posted: 2024-10-22 13:11:03
-
Machine Operator - CNC EDM
Machined Metal Components
Precision Engineering / Aerospace Industry
Nuneaton - CV13
Salary based on experience
Training Provided
Days or Nights - 12 Hour Shifts
Are you a skilled CNC Machine Operator with experience of working on metal components? Are you open to learning new skills? Would you like to work for a growing family-owned business that offers training and development opportunities?
Our client is a leading component manufacturer that works with a wide range of metal materials and produces parts for the Aerospace industry.
They are seeking a new EDM Machine Operator to join their growing team.
Commutable from Nuneaton, Hinckley, Coalville, Measham and Tamworth.
The Role of EDM Machine Operator:
- Being trained on a CNC EDM machine
- Producing metal components
- Working from drawings
- Working to tight tolerances
- Quality checking parts using various hand tools
- Maintaining machinery, removing swarf and routine oiling/greasing etc
- Working independently and as part of a team
Minimum Skills / Experience Required:
- Experience operating CNC machines, such as EDM, Turning, Lathe, Milling, Boring or Grinding
- Able to quality check own parts
- Ability to work from engineering drawings
- Keen to learn new skills and develop
- Motivated and excellent team player
- Able to commute to the CV13 area
The Package - CNC EDM Machine Operator:
- Starting salary depending on experience
- Days or Nights, 12 hour shifts, 6-6
- 25 Days Holiday plus Bank Holidays
- Training and progression opportunities
- Pension
- Free Eye Test
- Medical Scheme and Life Assurance
Interested? To apply for this EDM Machine Operator position, here are your two options:
1.
"This is the job for me! When can I start?" - Call 0116 2545411 now and lets discuss your experience.
Ask for Nilam between 8.30am - 5.30pm.
2.
"I think I'm right for this position, but I'm not sure I have enough to get an interview" - Click "apply now" so I can read your CV and let you know
PPDEL ....Read more...
Type: Permanent Location: Cadeby,England
Start: 22/10/2024
Salary / Rate: £28000 - £32000 per annum, Benefits: 33 days holiday. Free Eye Test. Medical Scheme. Life Assurance
Posted: 2024-10-22 13:03:07
-
Job Title: HS&E Advisor (Health, Safety & Environmental)
Contract Duration: 6 Months
Location: Yeovil
Pay Rate: £18.88 per hour
About the Company:
Our client is a leading player in the Aerospace industry, specialising in Avionics, Engines, Systems, and Service solutions.
The Yeovil site is dedicated to integrated supply chain operations, engineering and technology, and various specialized product lines, including Environmental Control Systems and Hydraulics Systems.
HS&E Advisor Job Overview:
We are currently seeking an experienced HS&E Advisor for a 6-month contract.
The successful candidate will focus on developing and implementing Health, Safety, and Environmental programmes to ensure compliance with regulatory standards and maintain a safe working environment.
This role is crucial in fostering a safety-first culture within the Aerospace business unit.
HS&E Advisor Key Responsibilities:
- Develop and implement HS&E strategies and safety programmes.
- Conduct risk assessments and safety audits.
- Investigate incidents and implement corrective actions.
- Ensure compliance with Health, Safety, and Environmental regulations.
- Deliver safety training programmes in collaboration with cross-functional teams.
HS&E Advisor Requirements:
- Proven experience in Health, Safety, and Environmental processes.
- Strong knowledge of HS&E regulations and best practices.
- Excellent communication skills.
- Preferred qualifications: IOSH or NEBOSH.
- Experience in a manufacturing or related environment is preferred.
Additional Information:
- Full BPSS screening is required (including proof of legal right to work, criminal records check, and drug screening).
- Compliance with Export Control Licences and Technical Assistance Agreements is essential.
How to Apply:
If you are a proactive HS&E professional seeking your next challenge, we encourage you to apply now to join this dynamic team.
....Read more...
Type: Contract Location: Yeovil,England
Start: 22/10/2024
Duration: 6 Months
Salary / Rate: £18 - £18.88 per hour
Posted: 2024-10-22 11:56:10
-
Lead External Attack Analyst
Cyber Operations
Aerospace & Defence
Preston or Frimley
1-2 days per month on-site
Up to £70,000 + 10% Bonus
*Candidates will need to be able to go through SC
*
We are working with an organisation that provides products and services to UK and US government agencies to span areas including Maritime, Air, Land, Cyber, Electronics and Aerospace.
You'll be joining during an exciting time of growth and innovation, working on multi-billion-pound programmes of work for the Ministry of Defence.
The role:
Maintain the global attack surface management service.
Assist with Purple team operations.
Be a SME in emerging cyber threats.
Identifying security weaknesses.
Background required:
In-depth experience across Security and Networking technologies including DNS, VPN, Firewalls, Attack Surface Management, IDS/IPS, Endpoint Protection, TCP/IP, Cloud, Open-Source Tooling and Vulnerability Management.
MITRE ATT&CK Framework
What's on offer:
Package up to £70,000 + 10% Bonus + Private Healthcare + Shares + Pension + much more.
Industry leading career progression and development opportunities.
Working on cutting-edge programmes that help strengthen the security posture of the UK.
....Read more...
Type: Permanent Location: City of Preston, England
Start: asap
Salary / Rate: £60000 - £70000 per annum + Bonus
Posted: 2024-10-22 11:28:56
-
Lead External Attack Analyst
Cyber Operations
Aerospace & Defence
Preston or Frimley
1-2 days per month on-site
Up to £70,000 + 10% Bonus
*Candidates will need to be able to go through SC
*
We are working with an organisation that provides products and services to UK and US government agencies to span areas including Maritime, Air, Land, Cyber, Electronics and Aerospace.
You'll be joining during an exciting time of growth and innovation, working on multi-billion-pound programmes of work for the Ministry of Defence.
The role:
Maintain the global attack surface management service.
Assist with Purple team operations.
Be a SME in emerging cyber threats.
Identifying security weaknesses.
Background required:
In-depth experience across Security and Networking technologies including DNS, VPN, Firewalls, Attack Surface Management, IDS/IPS, Endpoint Protection, TCP/IP, Cloud, Open-Source Tooling and Vulnerability Management.
MITRE ATT&CK Framework
What's on offer:
Package up to £70,000 + 10% Bonus + Private Healthcare + Shares + Pension + much more.
Industry leading career progression and development opportunities.
Working on cutting-edge programmes that help strengthen the security posture of the UK.
....Read more...
Type: Permanent Location: Frimley, England
Start: asap
Salary / Rate: £60000 - £70000 per annum + Bonus
Posted: 2024-10-22 11:28:15
-
We are recruiting for a Sales Account Manager to join our client in Southampton, this is a straight Permanent position offering a salary up to £50,000 DOE.
Your main responsibility will be to identify, development and successful close sale opportunities.
You will own the sales life-cycle, maintaining and building existing customer relationships across the business.
You will coordinate sales operations and implement sales techniques that allow the business to meet and surpass its sales targets consistently.
The duties and responsibilities of the Sales Account Manager will include:
- Managing key accounts
- Leading the sales of the business to ensure that targets are achieved and realistically derived for expected turnaround times
- Negotiate any contracts and price increases to ensure that business growth and margin targets are met
- Processing sales orders
- Prepare quotes and estimates for new and existing customers
- Provide accurate forecasting of financial performance of key accounts
- Provide customer and market insight into the business
- Build and maintain excellent business relationships with new and existing customers, suppliers and industry representatives
- Provide regular reports to the managing director
The ideal Sales Account Manager will:
- Be a self-starter and be a highly motivated individual
- Be able to set and achieve short and long-term goals in line with business needs
- To be output oriented
- Have experience in working with aerospace, engineering and manufacturing customers
- Experience in a technical manufacturing environment
- Excellent communication skills
- Have the ability to develop strong relationships within the business and externally
- Have the capacity to overcome barriers.
This position is a Permanent position following a successful interview!
If you have the right skills and are looking for your next position as a Sales Account Manager then please APPLY today or Call Sam on 07485 390946.
'' ....Read more...
Type: Permanent Location: Southampton,England
Start: 22/10/2024
Salary / Rate: £35000 - £50000 per annum
Posted: 2024-10-22 09:40:04
-
Cyber Security Data Analyst
Cyber Operations
Aerospace & Defence
Preston, Filton or Frimley
Ideally 1-2 days a week on-site - very flexible
Up to £40,000 + 2.5% Bonus
*Candidates will need to be able to go through SC
*
We are working with an organisation that provides products and services to UK and US government agencies to span areas including Maritime, Air, Land, Cyber, Electronics and Aerospace.
You'll be joining during an exciting time of growth and innovation, working on multi-billion-pound programmes of work for the Ministry of Defence.
The role:
Normalising and cleansing data for SIEM and SOAR consumption.
Create dashboards to normalise key security analytic data.
Ensure data sources adhere to enterprise logging standards, utilising SIEM and SOAR technologies.
Apply methodical and logical approach to use large datasets to construct actionable information to enhance the detection of suspicious activity.
Background required:
Python scripting
Understanding of enterprise networking/computing
What's on offer:
Package up to £40,000 + 2.5% Bonus + Private Healthcare + Shares + Pension + much more.
Industry leading career progression and development opportunities.
Working on cutting-edge programmes that help strengthen the security posture of the UK.
....Read more...
Type: Permanent Location: Frimley, England
Start: asap
Salary / Rate: £30000 - £40000 per annum + Bonus
Posted: 2024-10-21 15:27:04
