-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 2nd Shift Vat Washers ($2 Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY:
Cleans interior of batch processing tanks and vats to remove residue left after batches are filled off into containers.
Maintain used "wash" drums and account for used cleaning solvent (wash).
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Drain tank/vat of remaining batch material
Scrape and/or scrub interior of tank/vat to remove residue
Use appropriate cleaning solvent to clean tank/vat
Remove residue and cleaning solvent from tank/vat with squeegees, pump and/or suction hoses
Dry tank/vat
Inspect tank/vat to ensure no chance of contamination before authorizing tank/vat for use
Empty used cleaning solvent into appropriate used wash drum
Maintain used wash drum area by tracking amount of wash in drum and replacing filled drums
Apply proper labeling to empty wash drums to prepare for use
Maintain log of used cleaning solvents (wash)
Assist in Filling area as needed
Maintain neat and orderly work area
QUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
Basic reading and comprehension skills
Basic math/measurement skills
Specific Knowledge, Skills, and Abilities Required
Basic machine operation capabilities
Reasoning Ability: Ability to determine correctness of tank/vat cleaning and filling procedures in relation to specified guidelines learned during initial training and during any ongoing training.
CERTIFICATES, LICENSES, REGISTRATIONS: N/A
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions.
While performing the essential functions of this job the employee is required to stand and use hands to grasp, handle or feel.
The employee is required to walk, bend, stoop, and talk or hear.
Employee must regularly lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protective equipment is provided.
The employee is frequently exposed to wet and/or humid conditions and moving mechanical parts.
The noise level is usually moderate.
KEY PERFORMANCE INDICATORS (KPI)
Number of tanks/vats cleaned
Accuracy of required paperwork
AttendanceApply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:12:14
-
JOB DESCRIPTION
Title: Credit Analyst
Location: St.
Louis, MO (On-Site)
Summary:
Join Carboline's team as a Credit Analyst, where you'll play a key role in protecting the company's financial health while supporting business growth.
In this position, you'll evaluate customer credit worthiness, manage collections activities, resolve credit holds, and partner closely with Sales, Customer Service, and Accounting to ensure a smooth customer experience and timely payment of accounts.
Minimum Requirements:
High School Diploma or equivalent
Minimum of 1 year of collections, credit, accounts receivable, or related financial experience
Strong analytical, organizational, and communication skills
Proficiency with Microsoft Office and financial systems
Physical Requirements:
This position requires minimal physical activity but does involve extended computer usage, up to 8 hours per day.
No unusual environmental, lifting, or exertion requirements are associated with this role.
Essential Functions:
Review and release customer orders on credit hold by assessing account status, payment trends, and credit risk.
Evaluate new customer accounts through credit applications, financial statements, references, and credit reports.
Establish and recommend credit limits while balancing business growth and financial risk.
Monitor customer accounts, resolve credit concerns, and take proactive steps to mitigate risk.
Manage collections activities and partner with customers to resolve outstanding balances and improve cash flow.
Utilize risk mitigation tools such as bonds, guarantees, joint check agreements, and lien rights when appropriate.
Reconcile accounts, resolve discrepancies, and maintain accurate customer records.
Support collection agencies and legal recovery efforts through documentation and claim preparation.
Apply sound judgment to credit decisions, payment trends, and order approvals, escalating complex situations as needed.
Partner with Sales, Customer Service, Accounting, and customers to deliver solutions that support both customer satisfaction and business objectives.
Thrive in a fast-paced environment while managing multiple priorities with attention to detail and exceptional service.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best."Apply for this ad Online! ....Read more...
Type: Permanent Location: St. Louis, Missouri
Posted: 2026-09-10 15:12:14
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 2nd Shift Batch Makers ($2 Shift Differential.
$1,000 Sign On Bonus!
GENERAL SUMMARY
Mixes chemicals, dry resins and nitrocellulose in the process of making lacquer's, sealers and thinners used in the furniture industry.
Mixes different colors and bases in several different resin systems and tint them to match color standards provided by QA Lab.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Measure and weigh specified quantities of solvent and dry resins into proper blending tank according to formula sheet
Match colors to standards provided by QA Lab by tinting products with tint colors specified on formula sheet
Take products to QA Lab for QC checks and make final adjustments Maintain work area in a neat and orderly fashionJob Type: Full-time
Pay: From $19.50 per hour
Benefits:
401(k)
401(k) matching
Dental insurance
Employee assistance program
Flexible spending account
Health insurance
Life insurance
Paid time off
Retirement plan
Tuition reimbursement
Vision insuranceSchedule:
8 hour shift
Monday to Friday
Weekend availabilitySupplemental Pay:
Signing bonusAbility to commute/relocate:
Hudson, NC: Reliably commute or planning to relocate before starting work (Required)Experience:
Manufacturing: 3 years (Preferred)
Mixing/Batch Making: 1 year (Preferred)Shift availability:
Day Shift (Preferred)
Night Shift (Preferred)Work Location: In person
All candidates must pass background check and drug test to qualify for employment.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:12:05
-
JOB DESCRIPTION
Position Summary: This position is responsible for developing, instituting, and overseeing all aspects of Environmental, Health, Safety and Corporate Compliance.
This includes but is not limited to ensuring the company complies with all federal and state health, safety and environmental laws, regulations and reporting standards.
Essential Functions:
Works with all personnel at the facility to make sure all safety and environmental regulations are met and are being followed;
Primarily responsible for both the overview of compliance as well as day-to-day operations with respect to safety and regulatory permits and reports.
Ensure all are met with best practices and are compliant.
This pertains to Federal, State, and Local regulations i.e.
RCRA, EPA reporting requirements both directly to the EPA as well as those governed by Missouri DNR Air Pollution and HAZ WASTE;
Conduct and coordinate on-site daily inspections to audit physical conditions and safe work practices.
Including but not limited to: PPE for specific tasks, Emission Points, Work Permits, General Housekeeping, Spill Kits, Satellite and Pre-Transport Waste Storage Areas, Fire Extinguishers, Shower and Eye Wash, etc.;
Be aware concerning all city, state and federal compliance regulations;
Conduct and improve training programs related to all aspects of safety and compliance in the facility for all personnel.
This includes but not limited to: new employee training and refreshers, forklift safety, OSHA, hazwoper, contractor orientation, FOT/IATA, etc.
All training should be conducted in a timely manner and ensure additional process specific trainings are sufficient to maintain safety for employees.
Maintain and update all plans required at the facility, including but not limited to: General Operating Permit, Hazardous Waste Generator Compliance, Storm water Pollution Prevention Plan, Spill Prevention Control and Countermeasures, Emergency Response Plan, Compressed Gas Plan, Contingency Plans, Hazard Communication Program and Security Plans;
Essential reports such as TRI, Tier II, RMP, Quarterly and Biennial Waste Reporting (and their due dates) is the responsibility of your department.
Assistance will be given from other staff to prepare and maintain this data;
Participate and help conduct Safety Committee meetings;
Works closely with HR manager and Vice President/CFO to become responsible for the hands-on administration of the workers' compensation program.
Maintain the OSHA 300 log and tracking.
Manage medical monitoring program;
Maintain and improve environmental compliance programs related to hazardous wastes, air permitting, water pollution control, and community right-to-know programs;
Select and maintain safety equipment and safety supplies on site.
To include purchasing and keeping track of the supplies and managing the costs of these supplies;
Reduce waste generation and costs of disposal.
Upgrade monitoring, testing and instrumentation of waste and byproducts.
Schedule and maintain all documentation related to all waste pickups, including certifying and recertifying waste profiles;
Improve overall safety, housekeeping and reliability of plant work areas and compliance systems;
Member of the PSM team;
Implement and coordinate the documentation and schedule for preventative maintenance of equipment through the Faciliworks program.
Maintain, create and close work orders.
Keep Asset List up to date within Faciliworks database.
Train all maintenance personnel on these procedures and manage to ensure proper procedures are followed;
Ensure all permits (LOTO, Hot Work, Confined Space Entry), as well as MOC's are done correctly, and properly filed and archived.
Become proficient in generating, reviewing and updating SDS's and Labels for our product line.
This will be a multi-member team as GHS is being implemented in 2015, however, in 2016 and future years' maintenance of this system will become part of your department;
Supervise, coach, motivate and develop staff.
Minimum Requirements:
Bachelor's degree in environmental management, Chemistry, Engineering, or a related discipline, or high school diploma if degree with 5 years or more of direct experience in Process Safety Management, or suitable combination of education and relevant experience as described;
Specialized technical/aptitude experience: minimum of 3 years' experience in a manufacturing environment and demonstrated proficiency with manufacturing processes.
Previous work and/or substantial knowledge of, including commonly used concepts, practices and procedures, within the thermoset polymer industry is a strongly considered asset;
Demonstrated comprehensive knowledge of office and facilities coordination and basic leadership and management knowledge; (if applicable to position)
Demonstrated organization, facilitation, communication and presentation skills; (if applicable to position)
Ability to prioritize workflow and organize diverse material and ability to handle multiple, competing and changing priorities; ability to perform effectively without supervision and within established time limits and ongoing deadlines;
Ability to interact and communicate effectively and professionally verbally and in writing, and to provide exceptional service internally and externally;
Relevant computer skills for this position include knowledge and experience with Microsoft Office applications (Word, Excel, PowerPoint) and web-based applications.
Experience using SAGE Platinum for Windows preferred.
Displays adaptability in learning the use of relevant software and displays comprehension of fundamental computer practices and database management;
Demonstrated ability to serve as a knowledgeable resource to the organization's management team that provides leadership and direction;
Demonstrated leadership and vision managing staff groups and major projects or initiatives;
Outstanding interpersonal relationship building and employee coaching and development skills.
Benefits and Compensation
The pay range for applicants in this position generally ranges between $120,000.00/year and $140,000/year.
The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law.
In addition to career advancement and growth, continuous training, and mentoring opportunities, Arnette Polymers offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans.
Arnette Polymers is a division of The Stonhard Group, an RPM International company (NYSE: RPM) that is headquartered in Maple Shade, NJ and has more than 100 years of experience manufacturing and installing high performance, seamless floors throughout the world.
We manufacture and install long-term floor, wall and lining solutions to markets including, but not limited to: food & beverage, general manufacturing, pharmaceutical, chemical processing, education, healthcare, government, technology and hospitality.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
Pay: $120,000.00 - $140,00.00 per yearApply for this ad Online! ....Read more...
Type: Permanent Location: Richmond, Missouri
Posted: 2026-09-10 15:12:00
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 2nd Shift Material Handlers ($2 Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY
Move materials with forklift to appropriate locations within department and around facility.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Check inventory of machine tape, hot glue, UPC labels, box labels, ribbons, pallets, etc.
Order materials and maintain supplies necessary for the daily running of materials, such as cans, boxes, lids, pallet ship sheets, etc.
Maintain supplies for filling line, such as empty cans, boxes, etc.
and operate forklift to manage supply of materials to line
Move full pallets of finished material to pallet wrappers and wrap with shrink wrap.
Move completed pallets to shipping staging areas
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
Previous forklift experience preferred
Fill off experience preferred
Specific Knowledge, Skills, and Abilities Required
Basic math/ measurement skills
Basic reading and comprehension skills
Reasoning Ability
Determine correct processes regarding standard filling line procedures as instructed in initial training and from batch ticket instructions.
Work without continuous supervision and complete assigned projects.
CERTIFICATES, LICENSES, REGISTRATIONS: Must be able to obtain forklift license.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions.
While performing the essential functions of this job the employee is regularly required to stand, bend and/or stoop, grasp, handle or feel.
The employee is occasionally required to walk, talk and/or hear.
The employee must regularly lift and/or move up to 50 pounds.
Employee operates forklift for most of shift.
Employees must also be able to read and comprehend written instructions and remember processes and procedures for safe and accurate completion of duties for the entirety of the shift.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
KEY PERFORMANCE INDICATORS (KPI)
Accuracy of units produced
Appearance of work areaApply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:11:58
-
JOB DESCRIPTION
The Process Engineer is responsible for evaluating and improving processes within Stonhard manufacturing operations.
Additionally, the Process Engineer is responsible for implementation of continuous improvement initiatives, capital project support, production efficiency, maintenance process improvements, and equipment reliability.
Essential Functions
Lead root cause analysis for process failures.
Develop and maintain standard work instructions.
Develop and maintain Process Failure Mode Effect Analysis for areas of responsibility.
Improves production line efficiency to show a measurable increase in OEE.
Support maintenance in equipment troubleshooting.
Working knowledge of I/O, PLC, and 24V controls is preferred.
Programming a plus.
Experience with Manufacturing Execution Systems preferred.
Design and coordinate fabrication of manufacturing support components.
Support day-to-day production operations.
Re-engineer existing equipment to meet new optimization, reliability, safety, throughput, and process requirements.
Evaluate and make recommendations, which will increase output and decrease costs by addressing/improving workflow, ergonomics, time/motion characteristics, cycle-times, set-up times, waste, etc.
Confer with management and general staff to implement plans and recommendations.
Ensure CI project goals are met and sustained through the development of effective control plans.
Ensure Continuous Improvement processes and procedures are followed and adhered to through auditing and process confirmation practices.
Lead C.I.
initiatives in areas of 5S, Waste Reduction, Value-Stream Mapping, etc.
Ensure appropriate validations are completed as part of solution implementation.
Downtime Loss Analysis and Reduction - Start-up & Changeovers downtime improvement
Equipment failure (Structured failure analysis 5W's, Fishbone analysis)
Minimum Requirements
Bachelor's degree in engineering
Lean and/or Six Sigma preferred but not required.
Minimum 5 years of manufacturing experience preferably in a GMP environment.
Physical Requirements
While performing the duties of this position, the employee is regularly required to use hands to finger, handle, or feel and talk or hear.
The employee is frequently required to stand; walk and reach with hands and arms.
The employee is occasionally required to sit; stoop, kneel, crouch, or crawl.
The employee must regularly lift and /or move up to 10-25 pounds; frequently lift and/or move up to 50 pounds.
Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and ability to adjust focus.
Benefits and Compensation
The pay range for applicants in this position generally ranges between $65,000 and $75,000.
The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law.
In addition to career advancement and growth, continuous training, and mentoring opportunities, Stonhard offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Fort Wayne, Indiana
Posted: 2026-09-10 15:11:58
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 3rd Shift Vat Washers (Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY
Cleans interior of batch processing tanks and vats to remove residue left after batches are filled off into containers.
Maintain used "wash" drums and account for used cleaning solvent (wash).
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Drain tank/vat of remaining batch material
Scrape and/or scrub interior of tank/vat to remove residue
Use appropriate cleaning solvent to clean tank/vat
Remove residue and cleaning solvent from tank/vat with squeegees, pump and/or suction hoses
Dry tank/vat
Inspect tank/vat to ensure no chance of contamination before authorizing tank/vat for use
Empty used cleaning solvent into appropriate used wash drum
Maintain used wash drum area by tracking amount of wash in drum and replacing filled drums
Apply proper labeling to empty wash drums to prepare for use
Maintain log of used cleaning solvents (wash)
Assist in Filling area as needed
Maintain neat and orderly work area
Pay: From $18.00 per hour
Benefits:
401(k)
401(k) matching
Dental insurance
Employee assistance program
Flexible spending account
Health insurance
Life insurance
Paid time off
Retirement plan
Tuition reimbursement
Vision insuranceSchedule:
8 hour shift
Sunday to Thursday
Weekend availabilitySupplemental Pay:
Signing bonusAbility to commute/relocate:
Hudson, NC: Reliably commute or planning to relocate before starting work (Required)Experience:
Basic reading and comprehension skills
Basic math skills
Shift availability:
Night Shift (Preferred)Work Location: In person
All candidates must pass background check and drug test to qualify for employment.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:11:56
-
JOB DESCRIPTION
$1,000 Sign on Bonus
RPM Industrial Coatings Group in Hudson, NC is looking for Batch Makers/Mixer Techs.
GENERAL SUMMARY
Mixes chemicals, dry resins and nitrocellulose in the process of making lacquer's, sealers and thinners used in the furniture industry.
Mixes different colors and bases in several different resin systems and tint them to match color standards provided by QA Lab.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Measure and weigh specified quantities of solvent and dry resins into proper blending tank according to formula sheet
Match colors to standards provided by QA Lab by tinting products with tint colors specified on formula sheet
Take products to QA Lab for QC checks and make final adjustments Maintain work area in a neat and orderly fashionJob Type: Full-time
Pay: From $17.50 per hour
Benefits:
401(k)
401(k) matching
Dental insurance
Employee assistance program
Flexible spending account
Health insurance
Life insurance
Paid time off
Retirement plan
Tuition reimbursement
Vision insuranceSchedule:
8 hour shift
Monday to Friday
Weekend availabilitySupplemental Pay:
Signing bonusAbility to commute/relocate:
Hudson, NC: Reliably commute or planning to relocate before starting work (Required)Experience:
Manufacturing: 3 years (Preferred)
Mixing/Batch Making: 1 year (Preferred)Shift availability:
Day Shift (Preferred)
Night Shift (Preferred)Work Location: In person
All candidates must pass background check and drug test to qualify for employment.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:11:55
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 2nd Shift Batch Makers ($2 Shift Differential.
$1,000 Sign On Bonus!
GENERAL SUMMARY
Mixes chemicals, dry resins and nitrocellulose in the process of making lacquer's, sealers and thinners used in the furniture industry.
Mixes different colors and bases in several different resin systems and tint them to match color standards provided by QA Lab.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Measure and weigh specified quantities of solvent and dry resins into proper blending tank according to formula sheet
Match colors to standards provided by QA Lab by tinting products with tint colors specified on formula sheet
Take products to QA Lab for QC checks and make final adjustments Maintain work area in a neat and orderly fashionJob Type: Full-time
Pay: From $19.50 per hour
Benefits:
401(k)
401(k) matching
Dental insurance
Employee assistance program
Flexible spending account
Health insurance
Life insurance
Paid time off
Retirement plan
Tuition reimbursement
Vision insuranceSchedule:
8 hour shift
Monday to Friday
Weekend availabilitySupplemental Pay:
Signing bonusAbility to commute/relocate:
Hudson, NC: Reliably commute or planning to relocate before starting work (Required)Experience:
Manufacturing: 3 years (Preferred)
Mixing/Batch Making: 1 year (Preferred)Shift availability:
Day Shift (Preferred)
Night Shift (Preferred)Work Location: In person
All candidates must pass background check and drug test to qualify for employment.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:11:55
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 3rd Shift Fill Off Attendants (Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY
Fill completed batches into appropriate containers or onto tanker for shipping purposes, following appropriate procedures for different fill-off methods as indicated on batch ticket.
Seal and apply appropriate labeling to containers as indicated on batch tickets.
Move finished goods to finished goods warehouse for shipping.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate appropriate vat to be filled off per batch ticket instructions
Pre-mix material in vat before filling
Locate appropriate materials (containers, strainers, equipment, etc.) used for filling, as indicated by batch ticket, and in fill-off manuals
Always bond and ground containers before filling
Obtain retain per instructions in fill-off procedures.
Labels retain as directed by QC department
Complete fill-off procedure
Clean vat and equipment using appropriate cleaning solution indicated on batch ticket
Make proper notations on batch ticket regarding fill-off
Apply appropriate labeling as instructed on batch ticket
Move finished goods to warehouse if necessary
Maintain neat and orderly work area
Pay: From $18.00 per hour
Benefits:
401(k)
401(k) matching
Dental insurance
Employee assistance program
Flexible spending account
Health insurance
Life insurance
Paid time off
Retirement plan
Tuition reimbursement
Vision insuranceSchedule:
8 hour shift
Sunday to Thursday
Weekend availabilitySupplemental Pay:
Signing bonusAbility to commute/relocate:
Hudson, NC: Reliably commute or planning to relocate before starting work (Required)Experience:
Basic reading and comprehension skills
Basic math skills
Shift availability:
Night Shift (Preferred)Work Location: In person
All candidates must pass background check and drug test to qualify for employment.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:11:54
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for MRT Filling Attendants.
$1,000 Sign-On Bonus!
GENERAL SUMMARY
Fill completed batches into appropriate containers or onto tanker for shipping purposes, following appropriate procedures for different fill-off methods as indicated on batch ticket.
Seal and apply appropriate labeling to containers as indicated on batch tickets.
Move finished goods to finished goods warehouse for shipping.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate appropriate vat to be filled off per batch ticket instructions
Pre-mix material in vat before filling
Locate appropriate materials (containers, strainers, equipment, etc.) used for filling, as indicated by batch ticket, and in fill-off manuals
Always bond and ground containers before filling
Obtain retain per instructions in fill-off procedures.
Labels retain as directed by QC department
Complete fill-off procedure
Clean vat and equipment using appropriate cleaning solution indicated on batch ticket
Make proper notations on batch ticket regarding fill-off
Apply appropriate labeling as instructed on batch ticket
Move finished goods to warehouse if necessary
Maintain neat and orderly work area
Pay: From $16.00 per hour
Benefits:
401(k)
401(k) matching
Dental insurance
Employee assistance program
Flexible spending account
Health insurance
Life insurance
Paid time off
Retirement plan
Tuition reimbursement
Vision insuranceSchedule:
8 hour shift
Monday to Friday
Weekend availabilitySupplemental Pay:
Signing bonusAbility to commute/relocate:
Hudson, NC: Reliably commute or planning to relocate before starting work (Required)Experience:
Basic reading and comprehension skills
Basic math skills
Shift availability:
Day Shift (Preferred)Work Location: In person
All candidates must pass background check and drug test to qualify for employment.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:11:52
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 2nd Shift Fill Off Attendants ($2 Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY
Fill completed batches into appropriate containers or onto tanker for shipping purposes, following appropriate procedures for different fill-off methods as indicated on batch ticket.
Seal and apply appropriate labeling to containers as indicated on batch tickets.
Move finished goods to finished goods warehouse for shipping.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate appropriate vat to be filled off per batch ticket instructions
Pre-mix material in vat before filling
Locate appropriate materials (containers, strainers, equipment, etc.) used for filling, as indicated by batch ticket, and in fill-off manuals
Always bond and ground containers before filling
Obtain retain per instructions in fill-off procedures.
Labels retain as directed by QC department
Complete fill-off procedure
Clean vat and equipment using appropriate cleaning solution indicated on batch ticket
Make proper notations on batch ticket regarding fill-off
Apply appropriate labeling as instructed on batch ticket
Move finished goods to warehouse if necessary
Maintain neat and orderly work area
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
Basic reading and comprehension skills
Basic math skills
Specific Knowledge, Skills, and Abilities Required
Basic machine operation capabilities
Reasoning Ability:
Ability to determine correctness of filling procedures in relation to specified guidelines learned during initial training and during any ongoing training.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions.
While performing the essential functions of this job the employee is required to stand and use hands to grasp, handle or feel for entire shift.
The employee is required to walk, bend, stoop, and talk or hear.
Employee must regularly lift and/or move up to 50 pounds and lift and/or move up to 100 pounds with appropriate equipment.
Employees must also be able to read and comprehend written instructions and remember processes and procedures for safe and accurate completion of duties for the entirety of the shift.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protective equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Number of batches filled
Accuracy of filling
AttendanceApply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:11:51
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for Fill Off Attendants.
$1,000 Sign-On Bonus!
GENERAL SUMMARY: Fill completed batches into appropriate containers or onto tanker for shipping purposes, following appropriate procedures for different fill-off methods as indicated on batch ticket.
Seal and apply appropriate labeling to containers as indicated on batch tickets.
Move finished goods to finished goods warehouse for shipping.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate appropriate vat to be filled off per batch ticket instructions
Pre-mix material in vat before filling
Locate appropriate materials (containers, strainers, equipment, etc.) used for filling, as indicated by batch ticket, and in fill-off manuals
Always bond and ground containers before filling
Obtain retain per instructions in fill-off procedures.
Labels retain as directed by QC department
Complete fill-off procedure
Clean vat and equipment using appropriate cleaning solution indicated on batch ticket
Make proper notations on batch ticket regarding fill-off
Apply appropriate labeling as instructed on batch ticket
Move finished goods to warehouse if necessary
Maintain neat and orderly work area
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
Basic reading and comprehension skills
Basic math skills
Specific Knowledge, Skills, and Abilities Required
Basic machine operation capabilities
Reasoning Ability: Ability to determine correctness of filling procedures in relation to specified guidelines learned during initial training and during any ongoing training.
CERTIFICATES, LICENSES, REGISTRATIONS: N/A
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions.
While performing the essential functions of this job the employee is required to stand and use hands to grasp, handle or feel for entire shift.
The employee is required to walk, bend, stoop, and talk or hear.
Employee must regularly lift and/or move up to 50 pounds and lift and/or move up to 100 pounds with appropriate equipment.
Employees must also be able to read and comprehend written instructions and remember processes and procedures for safe and accurate completion of duties for the entirety of the shift.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protective equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Number of batches filled
Accuracy of filling
AttendanceApply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:11:51
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 3rd Shift MRT Fill Off Attendants (Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY: Fill completed batches into appropriate containers or onto tanker for shipping purposes, following appropriate procedures for different fill-off methods as indicated on batch ticket.
Seal and apply appropriate labeling to containers as indicated on batch tickets.
Move finished goods to finished goods warehouse for shipping.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate appropriate vat to be filled off per batch ticket instructions
Pre-mix material in vat before filling
Locate appropriate materials (containers, strainers, equipment, etc.) used for filling, as indicated by batch ticket, and in fill-off manuals
Always bond and ground containers before filling
Obtain retain per instructions in fill-off procedures.
Labels retain as directed by QC department
Complete fill-off procedure
Clean vat and equipment using appropriate cleaning solution indicated on batch ticket
Make proper notations on batch ticket regarding fill-off
Apply appropriate labeling as instructed on batch ticket
Move finished goods to warehouse if necessary
Maintain neat and orderly work area
QUALIFICATIONS
perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
Basic reading and comprehension skills
Basic math skills
Specific Knowledge, Skills, and Abilities Required
Basic machine operation capabilities
Reasoning Ability: Ability to determine correctness of filling procedures in relation to specified guidelines learned during initial training and during any ongoing training.
CERTIFICATES, LICENSES, REGISTRATIONS: N/A
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions.
While performing the essential functions of this job the employee is required to stand and use hands to grasp, handle or feel for entire shift.
The employee is required to walk, bend, stoop, and talk or hear.
Employee must regularly lift and/or move up to 50 pounds and lift and/or move up to 100 pounds with appropriate equipment.
Employees must also be able to read and comprehend written instructions and remember processes and procedures for safe and accurate completion of duties for the entirety of the shift.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protective equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Number of batches filled
Accuracy of filling
AttendanceApply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:11:49
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 2nd Shift Aerosol Line Operators (Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY
Responsible for filling production batches into aerosol containers as indicated on batch tickets.
Performs routine maintenance and makes mechanical or electrical adjustments or repairs to production line machines as needed.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate proper product and filling items such as cans, lids, labels, etc.
to fill aerosol containers per batch ticket instructions.
Set up all equipment on filling line and make changeovers for filling new batch ticket orders.
Review finished order for final counts on product and fill rates.
Maintain neat and orderly work area.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
No experience necessary
Fill off experience preferred
Specific Knowledge, Skills, and Abilities Required
Basic math/ measurement skills
Basic reading and comprehension skills
Basic mechanical and machine repair skills
Prior Aerosol Line Attendant knowledge preferred
Reasoning Ability
Ability to determine correct processes regarding standard aerosol filling procedures as instructed in initial training.
Ability to determine and make basic mechanical adjustments and know when additional assistance is needed.
The ability to work without continuous supervision and complete assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions.
While performing the essential functions of this job the employee is regularly required to stand and use hands to grasp, handle or feel.
The employee is occasionally required to walk, bend, stoop, talk and/or hear.
Employee must regularly lift and/or move up to 20 pounds and occasionally lift and/or move up to 100 pounds.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is regularly exposed to moving mechanical parts and occasionally to wet and/or humid conditions.
The noise level in the work environment is usually moderate.
KEY PERFORMANCE INDICATORS (KPI)
Number of units produced online each day
Accuracy of units produced
Proper maintenance of equipment
Appearance of work area.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:11:46
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 3rd Shift MRT Fill Off Attendants (Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY: Fill completed batches into appropriate containers or onto tanker for shipping purposes, following appropriate procedures for different fill-off methods as indicated on batch ticket.
Seal and apply appropriate labeling to containers as indicated on batch tickets.
Move finished goods to finished goods warehouse for shipping.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate appropriate vat to be filled off per batch ticket instructions
Pre-mix material in vat before filling
Locate appropriate materials (containers, strainers, equipment, etc.) used for filling, as indicated by batch ticket, and in fill-off manuals
Always bond and ground containers before filling
Obtain retain per instructions in fill-off procedures.
Labels retain as directed by QC department
Complete fill-off procedure
Clean vat and equipment using appropriate cleaning solution indicated on batch ticket
Make proper notations on batch ticket regarding fill-off
Apply appropriate labeling as instructed on batch ticket
Move finished goods to warehouse if necessary
Maintain neat and orderly work area
QUALIFICATIONS
perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
Basic reading and comprehension skills
Basic math skills
Specific Knowledge, Skills, and Abilities Required
Basic machine operation capabilities
Reasoning Ability: Ability to determine correctness of filling procedures in relation to specified guidelines learned during initial training and during any ongoing training.
CERTIFICATES, LICENSES, REGISTRATIONS: N/A
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions.
While performing the essential functions of this job the employee is required to stand and use hands to grasp, handle or feel for entire shift.
The employee is required to walk, bend, stoop, and talk or hear.
Employee must regularly lift and/or move up to 50 pounds and lift and/or move up to 100 pounds with appropriate equipment.
Employees must also be able to read and comprehend written instructions and remember processes and procedures for safe and accurate completion of duties for the entirety of the shift.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protective equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Number of batches filled
Accuracy of filling
AttendanceApply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:11:39
-
JOB DESCRIPTION
$1,000 Sign on Bonus
RPM Industrial Coatings Group in Hudson, NC is looking for Batch Makers/Mixer Techs.
GENERAL SUMMARY
Mixes chemicals, dry resins and nitrocellulose in the process of making lacquer's, sealers and thinners used in the furniture industry.
Mixes different colors and bases in several different resin systems and tint them to match color standards provided by QA Lab.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Measure and weigh specified quantities of solvent and dry resins into proper blending tank according to formula sheet
Match colors to standards provided by QA Lab by tinting products with tint colors specified on formula sheet
Take products to QA Lab for QC checks and make final adjustments Maintain work area in a neat and orderly fashionJob Type: Full-time
Pay: From $17.50 per hour
Benefits:
401(k)
401(k) matching
Dental insurance
Employee assistance program
Flexible spending account
Health insurance
Life insurance
Paid time off
Retirement plan
Tuition reimbursement
Vision insuranceSchedule:
8 hour shift
Monday to Friday
Weekend availabilitySupplemental Pay:
Signing bonusAbility to commute/relocate:
Hudson, NC: Reliably commute or planning to relocate before starting work (Required)Experience:
Manufacturing: 3 years (Preferred)
Mixing/Batch Making: 1 year (Preferred)Shift availability:
Day Shift (Preferred)
Night Shift (Preferred)Work Location: In person
All candidates must pass background check and drug test to qualify for employment.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:11:36
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 3rd Shift Vat Washers (Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY
Cleans interior of batch processing tanks and vats to remove residue left after batches are filled off into containers.
Maintain used "wash" drums and account for used cleaning solvent (wash).
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Drain tank/vat of remaining batch material
Scrape and/or scrub interior of tank/vat to remove residue
Use appropriate cleaning solvent to clean tank/vat
Remove residue and cleaning solvent from tank/vat with squeegees, pump and/or suction hoses
Dry tank/vat
Inspect tank/vat to ensure no chance of contamination before authorizing tank/vat for use
Empty used cleaning solvent into appropriate used wash drum
Maintain used wash drum area by tracking amount of wash in drum and replacing filled drums
Apply proper labeling to empty wash drums to prepare for use
Maintain log of used cleaning solvents (wash)
Assist in Filling area as needed
Maintain neat and orderly work area
Pay: From $18.00 per hour
Benefits:
401(k)
401(k) matching
Dental insurance
Employee assistance program
Flexible spending account
Health insurance
Life insurance
Paid time off
Retirement plan
Tuition reimbursement
Vision insuranceSchedule:
8 hour shift
Sunday to Thursday
Weekend availabilitySupplemental Pay:
Signing bonusAbility to commute/relocate:
Hudson, NC: Reliably commute or planning to relocate before starting work (Required)Experience:
Basic reading and comprehension skills
Basic math skills
Shift availability:
Night Shift (Preferred)Work Location: In person
All candidates must pass background check and drug test to qualify for employment.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:11:35
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 2nd Shift Vat Washers ($2 Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY:
Cleans interior of batch processing tanks and vats to remove residue left after batches are filled off into containers.
Maintain used "wash" drums and account for used cleaning solvent (wash).
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Drain tank/vat of remaining batch material
Scrape and/or scrub interior of tank/vat to remove residue
Use appropriate cleaning solvent to clean tank/vat
Remove residue and cleaning solvent from tank/vat with squeegees, pump and/or suction hoses
Dry tank/vat
Inspect tank/vat to ensure no chance of contamination before authorizing tank/vat for use
Empty used cleaning solvent into appropriate used wash drum
Maintain used wash drum area by tracking amount of wash in drum and replacing filled drums
Apply proper labeling to empty wash drums to prepare for use
Maintain log of used cleaning solvents (wash)
Assist in Filling area as needed
Maintain neat and orderly work area
QUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
Basic reading and comprehension skills
Basic math/measurement skills
Specific Knowledge, Skills, and Abilities Required
Basic machine operation capabilities
Reasoning Ability: Ability to determine correctness of tank/vat cleaning and filling procedures in relation to specified guidelines learned during initial training and during any ongoing training.
CERTIFICATES, LICENSES, REGISTRATIONS: N/A
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions.
While performing the essential functions of this job the employee is required to stand and use hands to grasp, handle or feel.
The employee is required to walk, bend, stoop, and talk or hear.
Employee must regularly lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protective equipment is provided.
The employee is frequently exposed to wet and/or humid conditions and moving mechanical parts.
The noise level is usually moderate.
KEY PERFORMANCE INDICATORS (KPI)
Number of tanks/vats cleaned
Accuracy of required paperwork
AttendanceApply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:11:34
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for Filling Line Operators.
$1,000 Sign-On Bonus!
GENERAL SUMMARY
Responsible for filling production batches into aerosol containers as indicated on batch tickets.
Performs routine maintenance and makes mechanical or electrical adjustments or repairs to production line machines as needed.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate proper product and filling items such as cans, lids, labels, etc.
to fill aerosol containers per batch ticket instructions.
Set up all equipment on filling line and make changeovers for filling new batch ticket orders.
Review finished order for final counts on product and fill rates.
Maintain neat and orderly work area.Pay: From $16.00 per hour
Benefits:
401(k)
401(k) matching
Dental insurance
Employee assistance program
Flexible spending account
Health insurance
Life insurance
Paid time off
Retirement plan
Tuition reimbursement
Vision insuranceSchedule:
8 hour shift
Monday to Friday
Weekend availabilitySupplemental Pay:
Signing bonusAbility to commute/relocate:
Hudson, NC: Reliably commute or planning to relocate before starting work (Required)Experience:
No experience necessary
Fill off experience preferredShift availability:
Day Shift (Preferred)
Night Shift (Preferred)Work Location: In person
All candidates must pass background check and drug test to qualify for employment.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:11:33
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for Filling Line Operators.
$1,000 Sign-On Bonus!
GENERAL SUMMARY
Responsible for filling production batches into aerosol containers as indicated on batch tickets.
Performs routine maintenance and makes mechanical or electrical adjustments or repairs to production line machines as needed.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate proper product and filling items such as cans, lids, labels, etc.
to fill aerosol containers per batch ticket instructions.
Set up all equipment on filling line and make changeovers for filling new batch ticket orders.
Review finished order for final counts on product and fill rates.
Maintain neat and orderly work area.Pay: From $16.00 per hour
Benefits:
401(k)
401(k) matching
Dental insurance
Employee assistance program
Flexible spending account
Health insurance
Life insurance
Paid time off
Retirement plan
Tuition reimbursement
Vision insuranceSchedule:
8 hour shift
Monday to Friday
Weekend availabilitySupplemental Pay:
Signing bonusAbility to commute/relocate:
Hudson, NC: Reliably commute or planning to relocate before starting work (Required)Experience:
No experience necessary
Fill off experience preferredShift availability:
Day Shift (Preferred)
Night Shift (Preferred)Work Location: In person
All candidates must pass background check and drug test to qualify for employment.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:11:33
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 2nd Shift Aerosol Line Operators (Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY
Responsible for filling production batches into aerosol containers as indicated on batch tickets.
Performs routine maintenance and makes mechanical or electrical adjustments or repairs to production line machines as needed.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate proper product and filling items such as cans, lids, labels, etc.
to fill aerosol containers per batch ticket instructions.
Set up all equipment on filling line and make changeovers for filling new batch ticket orders.
Review finished order for final counts on product and fill rates.
Maintain neat and orderly work area.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
No experience necessary
Fill off experience preferred
Specific Knowledge, Skills, and Abilities Required
Basic math/ measurement skills
Basic reading and comprehension skills
Basic mechanical and machine repair skills
Prior Aerosol Line Attendant knowledge preferred
Reasoning Ability
Ability to determine correct processes regarding standard aerosol filling procedures as instructed in initial training.
Ability to determine and make basic mechanical adjustments and know when additional assistance is needed.
The ability to work without continuous supervision and complete assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions.
While performing the essential functions of this job the employee is regularly required to stand and use hands to grasp, handle or feel.
The employee is occasionally required to walk, bend, stoop, talk and/or hear.
Employee must regularly lift and/or move up to 20 pounds and occasionally lift and/or move up to 100 pounds.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is regularly exposed to moving mechanical parts and occasionally to wet and/or humid conditions.
The noise level in the work environment is usually moderate.
KEY PERFORMANCE INDICATORS (KPI)
Number of units produced online each day
Accuracy of units produced
Proper maintenance of equipment
Appearance of work area.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:11:32
-
JOB DESCRIPTION
The Business Analyst partners with business stakeholders and technology teams to analyze business processes, identify opportunities for improvement, and translate business needs into technology-enabled solutions.
This role gathers requirements, designs future-state processes, and supports business transformation initiatives.
Essential Functions
Analyze business processes, systems, and workflows to identify improvement opportunities.
Gather, document, and validate business and functional requirements.
Facilitate workshops and interviews with stakeholders.
Develop process maps, user stories, functional specifications, and business cases.
Partner with IT, project managers, developers, and business leaders to deliver solutions.
Support solution design, testing, user acceptance testing (UAT), and implementation.
Analyze business data and KPIs to support decision-making.
Prepare executive presentations and project documentation.
Identify project risks, assumptions, and dependencies.
Drive continuous process improvement and change management.
Core Competencies
Business Process Analysis
Requirements Elicitation
Stakeholder Management
Project Coordination
Critical Thinking
Communication
Change Management
Process Improvement
Typical Deliverables
Business Requirements Documents (BRDs)
Functional Requirements Specifications
User Stories and Acceptance Criteria
Current-State and Future-State Process Maps
Business Cases
Gap Analyses
UAT Plans and Test Scripts
Executive Presentations
Minimum Requirements
Bachelor's degree in Business, Finance, Information Systems, Computer Science, or related field.
3-7+ years of experience in business analysis, consulting, process improvement, or related field.
Strong analytical, communication, and problem-solving skills.
Experience with requirements gathering and documentation.
Experience working in Agile project environments preferred.
Proficiency in Microsoft Excel, PowerPoint, Word, and Visio or similar tools.
Applicants must be authorized to work in the United States.
We are unable to sponsor or take over sponsorship of an employment visa for this position.
Preferred Requirements
Business process modeling
Data analysis and reporting
ERP and CRM systems experience
Jira, Confluence, or similar collaboration tools
Digital transformation experience
CBAP, PMI-PBA, or Agile certifications (preferred)
Benefits and Compensation
The pay range for applicants in this position generally ranges between $85,000 and $110,000.
The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law.
In addition to career advancement and growth, continuous training, and mentoring opportunities, Stonhard offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cherry Hill, New Jersey
Posted: 2026-09-10 15:11:31
-
JOB DESCRIPTION
The Business Analyst partners with business stakeholders and technology teams to analyze business processes, identify opportunities for improvement, and translate business needs into technology-enabled solutions.
This role gathers requirements, designs future-state processes, and supports business transformation initiatives.
Essential Functions
Analyze business processes, systems, and workflows to identify improvement opportunities.
Gather, document, and validate business and functional requirements.
Facilitate workshops and interviews with stakeholders.
Develop process maps, user stories, functional specifications, and business cases.
Partner with IT, project managers, developers, and business leaders to deliver solutions.
Support solution design, testing, user acceptance testing (UAT), and implementation.
Analyze business data and KPIs to support decision-making.
Prepare executive presentations and project documentation.
Identify project risks, assumptions, and dependencies.
Drive continuous process improvement and change management.
Core Competencies
Business Process Analysis
Requirements Elicitation
Stakeholder Management
Project Coordination
Critical Thinking
Communication
Change Management
Process Improvement
Typical Deliverables
Business Requirements Documents (BRDs)
Functional Requirements Specifications
User Stories and Acceptance Criteria
Current-State and Future-State Process Maps
Business Cases
Gap Analyses
UAT Plans and Test Scripts
Executive Presentations
Minimum Requirements
Bachelor's degree in Business, Finance, Information Systems, Computer Science, or related field.
3-7+ years of experience in business analysis, consulting, process improvement, or related field.
Strong analytical, communication, and problem-solving skills.
Experience with requirements gathering and documentation.
Experience working in Agile project environments preferred.
Proficiency in Microsoft Excel, PowerPoint, Word, and Visio or similar tools.
Applicants must be authorized to work in the United States.
We are unable to sponsor or take over sponsorship of an employment visa for this position.
Preferred Requirements
Business process modeling
Data analysis and reporting
ERP and CRM systems experience
Jira, Confluence, or similar collaboration tools
Digital transformation experience
CBAP, PMI-PBA, or Agile certifications (preferred)
Benefits and Compensation
The pay range for applicants in this position generally ranges between $85,000 and $110,000.
The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law.
In addition to career advancement and growth, continuous training, and mentoring opportunities, Stonhard offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cherry Hill, New Jersey
Posted: 2026-09-10 15:11:28
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for Fill Off Attendants.
$1,000 Sign-On Bonus!
GENERAL SUMMARY: Fill completed batches into appropriate containers or onto tanker for shipping purposes, following appropriate procedures for different fill-off methods as indicated on batch ticket.
Seal and apply appropriate labeling to containers as indicated on batch tickets.
Move finished goods to finished goods warehouse for shipping.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate appropriate vat to be filled off per batch ticket instructions
Pre-mix material in vat before filling
Locate appropriate materials (containers, strainers, equipment, etc.) used for filling, as indicated by batch ticket, and in fill-off manuals
Always bond and ground containers before filling
Obtain retain per instructions in fill-off procedures.
Labels retain as directed by QC department
Complete fill-off procedure
Clean vat and equipment using appropriate cleaning solution indicated on batch ticket
Make proper notations on batch ticket regarding fill-off
Apply appropriate labeling as instructed on batch ticket
Move finished goods to warehouse if necessary
Maintain neat and orderly work area
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
Basic reading and comprehension skills
Basic math skills
Specific Knowledge, Skills, and Abilities Required
Basic machine operation capabilities
Reasoning Ability: Ability to determine correctness of filling procedures in relation to specified guidelines learned during initial training and during any ongoing training.
CERTIFICATES, LICENSES, REGISTRATIONS: N/A
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions.
While performing the essential functions of this job the employee is required to stand and use hands to grasp, handle or feel for entire shift.
The employee is required to walk, bend, stoop, and talk or hear.
Employee must regularly lift and/or move up to 50 pounds and lift and/or move up to 100 pounds with appropriate equipment.
Employees must also be able to read and comprehend written instructions and remember processes and procedures for safe and accurate completion of duties for the entirety of the shift.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protective equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Number of batches filled
Accuracy of filling
AttendanceApply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-09-10 15:11:27
