-
JOB DESCRIPTION
General Purpose
The Commercial HVAC Estimator/Preconstruction Manager leads the technical and commercial development of PACS projects prior to proposal issuance.
This role partners with sales, engineering, and estimating to ensure opportunities are feasible, technically sound, and aligned with Pure Air's restoration methodology.
The position serves as the internal gatekeeper for scope, budget, and risk-protecting client experience and national account integrity, particularly within healthcare and institutional programs.
Essential Duties & Responsibilities
Opportunity Evaluation & Qualification
Conduct first technical review of all sales and national account opportunities
Assess:
Technical feasibility
Strategic alignment
Budget realism
Operational fit
Determine delivery approach:
Restoration
Retrofit
Replacement
Decline/reposition
Scope Development
Develop clear, defensible AHU restoration scopes, including:
Coil replacement
Fan array retrofits
Protective coatings
Structural repairs
Drain pans
Filtration & IAQ improvements
Collaborate with engineering to ensure best-practice restoration standards
Preconstruction Budgeting
Prepare conceptual budgets and ROM estimates
Validate assumptions related to:
Access and phasing
Infection control (healthcare)
Operational impacts
Mechanical system integration
Estimating Coordination
Bridge sales and estimating by providing:
Complete scopes and assumptions
Site documentation
Bid strategy guidance
Prevent underdeveloped opportunities from entering estimating
Proposal Risk Management
Review proposals and budget letters for:
Scope accuracy
Realistic budgets
Proper exclusions
Constructability
Client & Consultant Engagement
Participate in early discussions with:
Facility leaders
Consulting engineers
Construction managers
National account stakeholders
Position PACS as a technical authority in HVAC restoration
Programmatic Account Support
Support national programs across:
Healthcare
Universities, labs, and research facilities
Automotive manufacturers
Financial services
Ensure alignment with program contracting frameworks
Continuous Improvement
Develop standardized preconstruction workflows and intake processes
Implement tools to improve:
Scope clarity
Proposal accuracy
Estimating efficiency
Client confidence
Qualifications
Mechanical Engineering degree preferred
Advanced Microsoft Office skills preferred
Programming experience (VBA, C#, etc.) preferred
Experience with cloud platforms (Procore, e-Builder, iAuditor, etc.) preferred
Ability to travel up to 50%
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Clearwater, Florida
Posted: 2026-07-19 15:28:49
-
JOB DESCRIPTION
General Purpose
The Commercial HVAC Estimator/Preconstruction Manager leads the technical and commercial development of PACS projects prior to proposal issuance.
This role partners with sales, engineering, and estimating to ensure opportunities are feasible, technically sound, and aligned with Pure Air's restoration methodology.
The position serves as the internal gatekeeper for scope, budget, and risk-protecting client experience and national account integrity, particularly within healthcare and institutional programs.
Essential Duties & Responsibilities
Opportunity Evaluation & Qualification
Conduct first technical review of all sales and national account opportunities
Assess:
Technical feasibility
Strategic alignment
Budget realism
Operational fit
Determine delivery approach:
Restoration
Retrofit
Replacement
Decline/reposition
Scope Development
Develop clear, defensible AHU restoration scopes, including:
Coil replacement
Fan array retrofits
Protective coatings
Structural repairs
Drain pans
Filtration & IAQ improvements
Collaborate with engineering to ensure best-practice restoration standards
Preconstruction Budgeting
Prepare conceptual budgets and ROM estimates
Validate assumptions related to:
Access and phasing
Infection control (healthcare)
Operational impacts
Mechanical system integration
Estimating Coordination
Bridge sales and estimating by providing:
Complete scopes and assumptions
Site documentation
Bid strategy guidance
Prevent underdeveloped opportunities from entering estimating
Proposal Risk Management
Review proposals and budget letters for:
Scope accuracy
Realistic budgets
Proper exclusions
Constructability
Client & Consultant Engagement
Participate in early discussions with:
Facility leaders
Consulting engineers
Construction managers
National account stakeholders
Position PACS as a technical authority in HVAC restoration
Programmatic Account Support
Support national programs across:
Healthcare
Universities, labs, and research facilities
Automotive manufacturers
Financial services
Ensure alignment with program contracting frameworks
Continuous Improvement
Develop standardized preconstruction workflows and intake processes
Implement tools to improve:
Scope clarity
Proposal accuracy
Estimating efficiency
Client confidence
Qualifications
Mechanical Engineering degree preferred
Advanced Microsoft Office skills preferred
Programming experience (VBA, C#, etc.) preferred
Experience with cloud platforms (Procore, e-Builder, iAuditor, etc.) preferred
Ability to travel up to 50%
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Clearwater, Florida
Posted: 2026-07-19 15:11:57
-
JOB DESCRIPTION
General Purpose
The Commercial HVAC Estimator/Preconstruction Manager leads the technical and commercial development of PACS projects prior to proposal issuance.
This role partners with sales, engineering, and estimating to ensure opportunities are feasible, technically sound, and aligned with Pure Air's restoration methodology.
The position serves as the internal gatekeeper for scope, budget, and risk-protecting client experience and national account integrity, particularly within healthcare and institutional programs.
Essential Duties & Responsibilities
Opportunity Evaluation & Qualification
Conduct first technical review of all sales and national account opportunities
Assess:
Technical feasibility
Strategic alignment
Budget realism
Operational fit
Determine delivery approach:
Restoration
Retrofit
Replacement
Decline/reposition
Scope Development
Develop clear, defensible AHU restoration scopes, including:
Coil replacement
Fan array retrofits
Protective coatings
Structural repairs
Drain pans
Filtration & IAQ improvements
Collaborate with engineering to ensure best-practice restoration standards
Preconstruction Budgeting
Prepare conceptual budgets and ROM estimates
Validate assumptions related to:
Access and phasing
Infection control (healthcare)
Operational impacts
Mechanical system integration
Estimating Coordination
Bridge sales and estimating by providing:
Complete scopes and assumptions
Site documentation
Bid strategy guidance
Prevent underdeveloped opportunities from entering estimating
Proposal Risk Management
Review proposals and budget letters for:
Scope accuracy
Realistic budgets
Proper exclusions
Constructability
Client & Consultant Engagement
Participate in early discussions with:
Facility leaders
Consulting engineers
Construction managers
National account stakeholders
Position PACS as a technical authority in HVAC restoration
Programmatic Account Support
Support national programs across:
Healthcare
Universities, labs, and research facilities
Automotive manufacturers
Financial services
Ensure alignment with program contracting frameworks
Continuous Improvement
Develop standardized preconstruction workflows and intake processes
Implement tools to improve:
Scope clarity
Proposal accuracy
Estimating efficiency
Client confidence
Qualifications
Mechanical Engineering degree preferred
Advanced Microsoft Office skills preferred
Programming experience (VBA, C#, etc.) preferred
Experience with cloud platforms (Procore, e-Builder, iAuditor, etc.) preferred
Ability to travel up to 50%
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Clearwater, Florida
Posted: 2026-07-19 15:11:31
-
JOB DESCRIPTION
General Purpose
The Preconstruction Manager leads the technical and commercial development of PACS projects prior to proposal issuance.
This role partners with sales, engineering, and estimating to ensure opportunities are feasible, technically sound, and aligned with Pure Air's restoration methodology.
The position serves as the internal gatekeeper for scope, budget, and risk-protecting client experience and national account integrity, particularly within healthcare and institutional programs.
Essential Duties & Responsibilities
Opportunity Evaluation & Qualification
Conduct first technical review of all sales and national account opportunities
Assess:
Technical feasibility
Strategic alignment
Budget realism
Operational fit
Determine delivery approach:
Restoration
Retrofit
Replacement
Decline/reposition
Scope Development
Develop clear, defensible AHU restoration scopes, including:
Coil replacement
Fan array retrofits
Protective coatings
Structural repairs
Drain pans
Filtration & IAQ improvements
Collaborate with engineering to ensure best-practice restoration standards
Preconstruction Budgeting
Prepare conceptual budgets and ROM estimates
Validate assumptions related to:
Access and phasing
Infection control (healthcare)
Operational impacts
Mechanical system integration
Estimating Coordination
Bridge sales and estimating by providing:
Complete scopes and assumptions
Site documentation
Bid strategy guidance
Prevent underdeveloped opportunities from entering estimating
Proposal Risk Management
Review proposals and budget letters for:
Scope accuracy
Realistic budgets
Proper exclusions
Constructability
Client & Consultant Engagement
Participate in early discussions with:
Facility leaders
Consulting engineers
Construction managers
National account stakeholders
Position PACS as a technical authority in HVAC restoration
Programmatic Account Support
Support national programs across:
Healthcare
Universities, labs, and research facilities
Automotive manufacturers
Financial services
Ensure alignment with program contracting frameworks
Continuous Improvement
Develop standardized preconstruction workflows and intake processes
Implement tools to improve:
Scope clarity
Proposal accuracy
Estimating efficiency
Client confidence
Qualifications
Mechanical Engineering degree preferred
Advanced Microsoft Office skills preferred
Programming experience (VBA, C#, etc.) preferred
Experience with cloud platforms (Procore, e-Builder, iAuditor, etc.) preferred
Ability to travel up to 50%
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Clearwater, Florida
Posted: 2026-07-17 23:14:53
-
Field Service Engineer
Bracknell (Covering Nationwide)
£40,000 - £55,000 Basic + OTE £75,000 + Specialist Laser Training + OEM Training + Technical & Career Progression + Company Vehicle + Fuel Card + Personal Use + Pension + Holidays + Package
Become a specialist Field Service Engineer with a global leader in laser technology, where you'll receive industry-leading training, maximise your earnings to £75,000+, and build a long-term career with genuine progression opportunities into management or sales while significantly increasing your earnings.
This established manufacturer has over 40 years of success designing and supplying cutting-edge laser systems worldwide, offering exceptional technical development and clear progression into senior engineering, management, or technical sales.
Due to continued growth, they are looking for a motivated Field Service Engineer who wants to become an expert in advanced laser technology while significantly increasing their earnings.
You'll have the opportunity to earn £75,000+ in your first year, work on industry-leading equipment, and join a business that genuinely invests in its engineers and supports long-term career progression.
Your Role As A Field Service Engineer Will Include:
Service, repairs and installation of specialist laser equipment.
Fault finding on electrical and mechanical systems.
Covering customer sites across the UK and Ireland with occasional overnight stays.
The Successful Field Service Engineer Will Have:
Field Service Engineer experience with electrical and mechanical fault-finding skills.
Experience working on CNC machinery, laser equipment or similar industrial machinery (preferred).
Full UK driving licence.
Happy to travel across the UK and Ireland with occasional overnight stays.
Apply now or call Becka or Sophia on 07458163046 for immediate consideration.
Keywords:Field Service Engineer, Service Engineer, Mobile Engineer, Electrical Engineer, Mechanical Engineer, Electro-Mechanical Engineer, Electrical Service Engineer, Mechanical Service Engineer, Installation Engineer, Commissioning Engineer, Maintenance Engineer, Multi-Skilled Engineer, Electrical Maintenance Engineer, Mechanical Maintenance Engineer, Industrial Engineer, Automation Engineer, Capital Equipment Engineer, CNC Engineer, Manufacturing Engineer, Mechatronics Engineer, Technical Engineer, Laser Engineer, Laser Systems Engineer, Bracknell, Binfield, Wokingham, Reading, Crowthorne, Sandhurst, Camberley, Farnborough, Fleet, Hook, Basingstoke, Newbury, Thatcham, Didcot, Abingdon, Oxford, Maidenhead, Windsor, Slough, High Wycombe, Marlow, Henley-on-Thames, Ascot, Sunningdale, Virginia Water, Egham, Staines-upon-Thames, Woking, Guildford, Aldershot, Farnham, Godalming, Leatherhead, Uxbridge, Hayes, Heathrow, Harrow, Watford, Aylesbury, Milton Keynes, Hemel Hempstead, Amersham, Chesham, Berkshire, Surrey, Hampshire, Buckinghamshire, Oxfordshire, West London.
....Read more...
Type: Permanent Location: Bracknell, England
Start: asap
Salary / Rate: £40000 - £55000 per annum + Training + Stability + Work life balance
Posted: 2026-07-17 13:18:26
-
Technical Sales Engineer
Oxford
£40,000 - £45,000 Basic + OTE £87,000 + Commission + Specialist Laser Training + OEM Training + Technical & Career Progression + Company Car + Fuel Card + Personal Use + Pension + Holidays + Health insurance + Hybrid working
Become a specialist Technical Sales Engineer with a global leader in laser technology, where you'll receive industry-leading training, maximise your earnings to £87,000+, and build a long-term career with genuine progression opportunities into senior sales management while working with cutting-edge laser systems.
This established manufacturer has over 40 years of success designing and supplying advanced laser systems worldwide, offering exceptional technical development and clear progression into senior sales, business development, or management.
Due to continued growth, they are looking for a motivated technical Sales Engineer who can combine technical expertise with consultative selling to develop new business and support existing customers across the UK and Ireland.
You'll have the opportunity to earn £87,000+ in your first year while representing industry-leading technology and joining a business that genuinely invests in its people.
Your Role As A Techncial Sales Engineer Will Include:
Selling specialist laser systems and capital equipment to new and existing customers.
Managing the full sales cycle from enquiry through to quotation, demonstration, negotiation and order.
Building long-term relationships with customers across manufacturing and engineering sectors.
Working closely with the service and applications teams to deliver outstanding customer support.
Covering customer sites across the UK and Ireland with occasional overnight stays.
The Successful Technical Sales Engineer Will Have:
Experience selling technical equipment (E.G lasers, CNC machinery, industrial machinery, automation or capital equipment)
Electronic background
Commutable to the Bracknell site
Apply now or call Becka or Sophia on 07458 163046 for immediate consideration.
Keywords: Sales Engineer, Technical Sales Engineer, Area Sales Manager, Regional Sales Manager, Business Development Manager, BDM, Key Account Manager, Account Manager, Capital Equipment Sales, Industrial Sales Engineer, Machinery Sales Engineer, Laser Sales Engineer, CNC Sales Engineer, Automation Sales Engineer, Manufacturing Sales, OEM Sales Engineer, Applications Engineer, Technical Consultant, Capital Equipment, Laser Systems, CNC Machinery, Industrial Machinery, Manufacturing, Automation, Bracknell, Binfield, Wokingham, Reading, Crowthorne, Sandhurst, Camberley, Farnborough, Fleet, Hook, Basingstoke, Newbury, Maidenhead, Windsor, Slough, High Wycombe, Marlow, Henley-on-Thames, Ascot, Sunningdale, Virginia Water, Egham, Staines-upon-Thames, Woking, Guildford, Aldershot, Farnham, Godalming, Leatherhead, Uxbridge, Hayes, Heathrow, Didcot, Abingdon, Thatcham, Oxford, Berkshire, Surrey, Hampshire, Buckinghamshire, Oxfordshire, West London. ....Read more...
Type: Permanent Location: Oxford, England
Start: asap
Duration: perm
Salary / Rate: £40000 - £45000 per annum + + Overtime (OTE £87,000) + Training
Posted: 2026-07-17 12:10:44
-
Fire and Security EngineerWeybridge£45,000 - £55,000 Basic + OTE £2-£5K + Overtime + Call out rota + Training + Progression + Prestigious and Elite client base + high-end projects + social events + closed for christmas + MORE
Work as a Fire and Security Engineer for an electrical contractor renowned for their expertise in AV, security, and electrical installations.
A unique opportunity to build your experience portfolio while working on prestigious projects, including historical estates, high-end residential properties, and with an elite client base.
Established nearly 10 years ago this contractor prides itself on quality of work and client satisfaction which go hand in hand with a commitment to employee respect, investment, and career progression.
Join a dynamic environment where your contributions are valued, and your professional growth is actively supported.
Long term you'll be crucial to growing the team and become a recognised leader.
The role of the Fire and Security Engineer will include:
* Being allocated to a project from conception to completion, carrying out installation of fire alarm systems, security systems and some electrical installation
* Carry out commissioning and maintenance works on high end residential projects across London and Surrey
* Be on a call out rota when required
The successful Fire and Security Engineer will need:
* Experience within Fire and Security / Automation or similar
* Experience within Construction or Engineering
* Full UK driving Licence For immediate consideration please call Matthew on 07458163042 or click to apply
Keywords: fire, security, AV, fire alarms, Automation, installation, electrical, fire engineer, engineer, field service engineer, fire and security engineer, construction, electrical fit out, high-end residential, commercial electrician, Surrey, Weybridge, South London, Epsom, Cherstey, Esher, Cobham, Sussex ....Read more...
Type: Permanent Location: Surrey, England
Start: ASAP
Duration: permanent
Salary / Rate: £45000 - £55000 per annum + £45,000 - £55,000 Basic + Training
Posted: 2026-07-17 11:27:54
-
Mechanical Engineer - Programme Manager - Drug Delivery Devices
A period of significant growth has created an opportunity for a Programme Manager with a strong Mechanical Engineering background and deep, hands‑on experience in drug delivery device development.
Based in Cambridge, you will lead multiple programmes focused on advancing next‑generation delivery platforms.
Some projects will see you mentoring and guiding junior engineers, while others will require you to take ownership of core mechanical design activities yourself.
We are seeking someone who is currently working at the forefront of drug delivery technologies—such as autoinjectors, inhalers, infusion systems, wearable delivery devices, or other combination products—and who is confident translating complex user, clinical, and regulatory requirements into robust mechanical solutions.
Experience with electro‑mechanical medical devices is highly advantageous, as many of the programmes you will lead involve integrated systems and multidisciplinary collaboration.
To succeed in this role, you will need to be commercially minded, able to balance technical innovation with real‑world product viability.
You should have experience successfully taking medical or drug delivery products through development and into market launch, understanding the commercial, regulatory, and manufacturing considerations that shape decision‑making.
This is a highly collaborative environment, so you must be comfortable working closely with internal teams, external partners, clients, and suppliers to drive programmes forward efficiently and strategically.
A strong academic foundation in Mechanical Engineering or a related discipline is expected.
A master's degree or PhD would be beneficial, but industry experience in developing regulated drug delivery systems is the key requirement.
Familiarity with EN60601 is useful, and a solid working knowledge of ISO 13485 and design controls for combination products is essential.
The technologies you will help shape are genuinely life‑changing—innovative drug delivery systems that improve therapeutic outcomes, enhance patient adherence, and ultimately transform lives on a global scale.
This position involves extensive communication with internal teams, external partners, and clients, so experience in roles requiring regular project updates, stakeholder management, and cross‑functional coordination will be valuable.
Many individuals who excel in this environment have a naturally technical mindset and enjoy hands‑on problem solving—whether that's building drones, programming, tinkering with engines, or similar hobbies.
If this sounds like you, make sure it's visible on your CV.
In return, you'll join a world‑class organisation offering a clear career development pathway, continuous technical training, an excellent salary, bonus scheme, enhanced pension, medical insurance, free meals, and the full suite of benefits expected from a global blue‑chip company.
Interest in this role will be high, so early applications are encouraged.
For more information, please contact Andrew Welsh, Director of Medical Devices, Biotech and DeepTech Recruitment at Newton Colmore, on +44 121 268 2240.
Alternatively, submit your application and a member of our team will be in touch.
Please note that without a CV, we can only provide limited information. ....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: Pension, bonus, medical etc.
Posted: 2026-07-17 08:29:57
-
Area Sales Manager - Industrial & Automotive Consumables
Location: Field Based - Cambridge & Milton Keynes
Salary: OTE £40K (basic £30K) plus quarterly Bonus + Company Car + Fuel Card + Mobile Phone + Laptop + 32 days hols + Pension + Fully Remote Role + No Weekends
Are you an ambitious Area Sales Manager / Business Development Manager or Field Sales Executive looking for your next challenge?
My client through expansion is looking for a motivated and commercially driven sales professional to manage and grow an established territory covering Cambridge, Milton Keynes and the surrounding areas.
This is a field-based role focused on developing new business, growing existing accounts and driving sales across a comprehensive range of industrial and automotive product & consumables.
You'll build strong customer relationships, identify new opportunities and become a trusted partner by providing commercial support and product advice.
The Role:
We're looking for someone who can:
Develop new business while managing and growing existing customer accounts.
Achieve territory sales targets through regular customer visits and relationship building.
Promote a wide range of industrial consumables and provide product recommendations.
Negotiate commercial agreements and deliver excellent customer service.
Manage your territory effectively using CRM and market insight.
Work collaboratively with internal teams and represent company at customer meetings and industry events.
About You:
You'll ideally have:
A proven track record in field sales, business development or account management.
Experience selling industrial, engineering, manufacturing or automotive products/consumables.
Strong communication, negotiation and relationship-building skills.
Good commercial awareness with a results-driven approach.
Experience using CRM systems and a full UK driving licence.
A technical or mechanical background would be advantageous.
To express an interest in this Area Sales Manager role apply in confidence to:
Robert Cox, Senior Recruitment Consultant at Glen Callum Associates Ltd the Automotive Aftermarket Recruitment Specialist on 07398 204832 or email
JOB REF: 4368RC Area Sales Manager
Glen Callum Associates is committed to creating diverse and inclusive workplaces.
We welcome applications from all qualified candidates regardless of gender, age, ethnicity, disability, sexual orientation, or background.
We believe that a variety of perspectives makes a team stronger and a workplace better.
If you need any adjustments during the recruitment process, please let us know - we're here to support you. ....Read more...
Type: Permanent Location: Milton Keynes, England
Start: 16/08/2026
Salary / Rate: £30000 - £40000 per annum + bonus + company car + fuel card + pension
Posted: 2026-07-16 16:00:05
-
Area Sales Manager - Industrial & Automotive Consumables
Location: Field Based - Cambridge & Milton Keynes
Salary: OTE £40K (basic £30K) plus quarterly Bonus + Company Car + Fuel Card + Mobile Phone + Laptop + 32 days hols + Pension + Fully Remote Role + No Weekends
Are you an ambitious Area Sales Manager / Business Development Manager or Field Sales Executive looking for your next challenge?
My client through expansion is looking for a motivated and commercially driven sales professional to manage and grow an established territory covering Cambridge, Milton Keynes and the surrounding areas.
This is a field-based role focused on developing new business, growing existing accounts and driving sales across a comprehensive range of industrial and automotive product & consumables.
You'll build strong customer relationships, identify new opportunities and become a trusted partner by providing commercial support and product advice.
The Role:
We're looking for someone who can:
Develop new business while managing and growing existing customer accounts.
Achieve territory sales targets through regular customer visits and relationship building.
Promote a wide range of industrial consumables and provide product recommendations.
Negotiate commercial agreements and deliver excellent customer service.
Manage your territory effectively using CRM and market insight.
Work collaboratively with internal teams and represent company at customer meetings and industry events.
About You:
You'll ideally have:
A proven track record in field sales, business development or account management.
Experience selling industrial, engineering, manufacturing or automotive products/consumables.
Strong communication, negotiation and relationship-building skills.
Good commercial awareness with a results-driven approach.
Experience using CRM systems and a full UK driving licence.
A technical or mechanical background would be advantageous.
To express an interest in this Area Sales Manager role apply in confidence to:
Robert Cox, Senior Recruitment Consultant at Glen Callum Associates Ltd the Automotive Aftermarket Recruitment Specialist on 07398 204832 or email
JOB REF: 4368RC Area Sales Manager
Glen Callum Associates is committed to creating diverse and inclusive workplaces.
We welcome applications from all qualified candidates regardless of gender, age, ethnicity, disability, sexual orientation, or background.
We believe that a variety of perspectives makes a team stronger and a workplace better.
If you need any adjustments during the recruitment process, please let us know - we're here to support you. ....Read more...
Type: Permanent Location: Cambridge, England
Start: 16/08/2026
Salary / Rate: £30000 - £40000 per annum + bonus + company car + fuel card + pension
Posted: 2026-07-16 15:13:27
-
PhD or Post‑Doc Business Development Consultant - Medical Devices - Cambridge
If you love being close to innovation and want to help shape the next generation of Medical Device technologies, this role puts you right at the front.
You'll be working with organisations developing breakthrough products, solving complex engineering and scientific challenges, and turning early ideas into solutions that genuinely improve lives.
This is consultative, relationship‑led business development.
You'll bring technical credibility into early conversations, quickly understanding a client's challenge and showing where your organisation can add real value.
It suits someone who enjoys digging into the science, asking sharp questions and helping clients see the path forward.
You'll collaborate with multidisciplinary teams working on advanced surgical technologies, wearable and implantable devices, and next‑generation diagnostics.
You'll help shape compelling proposals, build long‑term partnerships and support clients from concept through to commercially successful outcomes.
Projects range from implantable sensors that give people with diabetes greater freedom, to laser‑based systems protecting eyesight, to non‑invasive technologies targeting cancer cells.
You'll be out in the market building trusted relationships, meeting clients face‑to‑face and developing a strong network across the Medical Devices sector.
Internally, you'll work closely with scientists, engineers and project leaders, deepening your technical awareness and helping connect the right expertise to the right opportunity.
You'll grow a healthy pipeline, strengthen existing partnerships, negotiate commercial agreements and contribute to go‑to‑market strategy.
To thrive, you'll bring a strong academic background in a relevant scientific or engineering discipline, ideally at post‑doc level.
Experience securing funding for your own research is a real advantage — that ability to write persuasive, technically grounded proposals will translate directly into success here.
You'll be curious, commercially aware and quick to grasp new concepts.
You'll communicate with clarity and empathy, build trust easily and be comfortable travelling for meetings when needed.
You'll be joining a supportive, forward‑thinking environment with a strong culture of collaboration and technical excellence.
The benefits package includes bonuses, enhanced pension contributions, private medical cover, enhanced parental leave, relocation support where needed and a range of additional perks you'd expect from a large, well‑established organisation.
If this sounds like the kind of role that excites you, I'd encourage you to apply now or risk missing out.
At Newton Colmore, we specialise in supporting innovative organisations across Medical Devices, Diagnostics, Digital Health and DeepTech.
If you'd like to discuss the role in more detail, explore similar opportunities or talk confidentially about your career plans, we're here to help. ....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: Pension, bonus, medical etc.
Posted: 2026-07-16 09:09:52
-
Service Manager
Oxford
£60,000 - £75,000 Basic + Bonus + OEM Training + Stability + Work-Life Balance + Job Satisfaction + Appreciation + Family - Feel + Company Car (Personal Use) + Fuel Card + Pension
Take the next step in your career with a leading specialist within the medical and laboratory equipment sector.
This is an excellent opportunity for an experienced Service Manager to join a growing business offering long-term stability, genuine autonomy, and the chance to play a key role in shaping and developing the service function.
Join a company that values its employees, offers a supportive and collaborative environment, and provides ongoing manufacturer training.
As a service manager, you'll lead a team of engineers while ensuring exceptional service delivery across a specialist range of washer disinfectors and autoclaves used within laboratory and scientific environments.
This expanding organisation has ambitious growth plans and is looking for a hands-on Service Manager who can drive operational performance, support engineers in the field, and maintain high levels of customer satisfaction.
Your Role as a Service Manager Will Include:
Managing and supporting a team of Field Service Engineers
Overseeing service operations, scheduling and performance
Providing technical support and guidance on washer disinfectors and autoclaves
Monitoring KPIs, service quality and customer satisfaction
Supporting engineer development, training and recruitment
Working closely with senior management to support business growth
Managing customer relationships and resolving escalated technical issues
The Successful Service Manager Will Need:
Previous experience managing or supervising Field Service Engineers
Strong knowledge of washer disinfectors and autoclaves (Laboratory, medical or Dental considered)
Strong technical and customer-facing skills
Full UK Driving Licence
Commutable distance to the Wokingham area and happy to travel UK wide
Call Rebecka Van Ristell on 07458 163046 for immediate consideration or apply today.
Keywords: Service Manager, Regional Service Manager, National Service Manager, Engineering Manager, Technical Service Manager, Operations Manager, Service Delivery Manager, Field Service Manager, Engineering Supervisor, Service Supervisor, Medical Equipment Manager, Medical Engineering Manager, Decontamination Engineer, Autoclave Engineer, Washer Disinfector Engineer, Sterilisation Engineer, Validation Engineer, HTM Engineer, Medical Engineer, Laboratory Engineer, Scientific Engineer, Biomedical Engineer, Clinical Engineer, Field Service Engineer, Service Engineer, Electro-Mechanical Engineer, Maintenance Engineer, Electrical Engineer, Mechanical Engineer, OEM Engineer, Technical Manager, Bradford, Leeds, Wakefield, Huddersfield, Halifax, Dewsbury, Batley, Morley, Pudsey, Castleford, Pontefract, Wetherby, Harrogate, York, Sheffield, Doncaster, Rotherham, Barnsley, Hull, Scunthorpe, Grimsby, Lincoln, Nottingham, Derby, Leicester, Birmingham, Coventry, Wolverhampton, Stoke-on-Trent, Telford, Manchester, Bolton, Wigan, Warrington, Liverpool, Chester, Preston, Blackpool, Blackburn, Burnley, Lancaster, Carlisle, Newcastle, Sunderland, Middlesbrough, Durham, Darlington, Edinburgh, Glasgow, Dundee, Aberdeen, Bristol, Swindon, Reading, Oxford, Milton Keynes, Northampton, Cambridge, Peterborough, Norwich, Chelmsford, Colchester, Ipswich, Luton, Bedford, Stevenage, Watford, Hemel Hempstead, Slough, High Wycombe, London, Croydon, Dartford, Maidstone, Ashford, Crawley, Brighton, Portsmouth, Southampton, Bournemouth, Exeter, Plymouth, Taunton, Cardiff, Newport, Swansea, UK Wide.
This vacancy is being advertised by Future Engineering Recruitment Ltd.
The services of Future Engineering Recruitment Ltd are those of an Employment Agency.
Please visit our website at Future Engineering Recruitment to view other positions we are currently handling.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.
Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit, should not apply as your details will not be processed.
We will endeavour to respond to all applicants; however, due to the sheer volume of responses, we can only guarantee that candidates who have been shortlisted will be contacted. ....Read more...
Type: Permanent Location: Oxford, England
Start: asap
Duration: perm
Salary / Rate: £65000 - £75000 per annum + Training + Stability + Work life balance
Posted: 2026-07-15 15:31:25
-
Our client, a leading designer and manufacturer of life safety technology, are looking for an Electronics Engineer to join their team in Cambridge on a permanent basis.
This is an exciting opportunity to work on the design and development of high-reliability electronic products, taking ownership of projects throughout the full product lifecycle, from concept and prototyping through to certification and production.
Key responsibilities of the Electronics Engineer job based in Cambridge:
Design and develop analogue, mixed-signal and embedded electronic circuits for innovative products.
Perform circuit simulation, schematic capture and PCB layout using Altium Designer.
Develop prototypes, proof-of-concept designs and support board bring-up activities.
Define and execute design verification and validation (V&V) plans, including testing and performance validation.
Support New Product Introduction (NPI) activities and work closely with manufacturing partners.
Contribute to product architecture, design reviews and cost optimisation initiatives.
Investigate product failures, perform root cause analysis and implement corrective actions.
Support compliance and certification activities, preparing technical documentation where required.
Collaborate with multidisciplinary engineering teams including software, mechanical, manufacturing and compliance engineers.
Experience required for the Electronics Engineer job based in Cambridge:
Degree in Electronics Engineering, Electrical Engineering or a related discipline.
Experience in an electronics design and development environment.
Strong practical experience in analogue and mixed-signal electronic circuit design.
Proficiency with PCB design tools, ideally Altium Designer.
Experience in electronic prototyping, testing and debugging.
Good understanding of the complete electronic product development lifecycle.
Strong communication skills with the ability to work effectively within multidisciplinary teams.
If this Electronics Engineer job based in Cambridge could be of interest, please send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878816. ....Read more...
Type: Permanent Location: Cambridge, England
Start: ASAP
Salary / Rate: £45000 - £60000 per annum
Posted: 2026-07-15 14:16:36
-
An exciting opportunity has arisen for an experienced Software Solutions Architect to join an innovative engineering organisation developing complex, mission-critical software systems.
Working across multiple engineering teams and external technology partners, you will be responsible for defining and maintaining solution architectures that enable the successful integration of software platforms, cloud services, and operational systems.
Acting as the technical bridge between stakeholders, you will ensure solutions remain scalable, secure, and aligned with long-term business and engineering objectives.
This role would suit an experienced architect with strong systems thinking, a collaborative approach, and a passion for delivering robust software solutions within highly regulated engineering environments.
Key Responsibilities
- Develop and maintain end-to-end solution architectures across multiple software systems and suppliers.
- Define implementation roadmaps, operational models, and long-term technology strategies.
- Ensure solutions meet security, privacy, performance, and testing requirements.
- Design cloud-based architectures, selecting appropriate services while optimising cost and scalability.
- Support migration of existing applications and services to modern cloud environments.
- Provide architectural governance throughout project delivery, managing change requests and technical risks.
- Collaborate with software, systems, infrastructure, and external engineering teams to ensure seamless integration.
- Ensure compliance with relevant engineering standards, policies, and best practices.
Required Experience
- Proven experience as a Software Solutions Architect or in a similar senior technical architecture role.
- Strong background designing and integrating complex software systems across multiple teams and suppliers.
- Experience developing secure, scalable, and maintainable solution architectures.
- Knowledge of cloud platforms such as AWS or Azure, including cloud migration and cost optimisation.
- Experience producing architecture roadmaps and guiding implementation activities.
- Understanding of architecture governance, change management, and technical risk assessment
Desirable Experience
- Experience within aerospace, space, defence, robotics, or other safety- or mission-critical industries.
- Familiarity with systems engineering principles and software architecture standards.
- Experience with distributed systems, APIs, and integration platforms.
- Knowledge of DevOps practices, CI/CD pipelines, and modern software delivery methodologies.
- Understanding of cybersecurity principles and secure-by-design architectures.
- Experience working with third-party technology providers and managing technical integrations.
- Knowledge of data architecture and enterprise integration approaches.
What\'s on Offer
- Hybrid and flexible working arrangements including 9/75 work pattern.
- Private healthcare and life assurance.
- Generous annual leave allowance with additional service-related entitlement.
- Relocation support available for suitable candidates.
- Modern engineering facilities and collaborative working environment.
- Opportunity to work on technically challenging, mission-critical programmes alongside experienced multidisciplinary engineering teams.
TT ....Read more...
Type: Permanent Location: Oxfordshire,England
Start: 15/07/2026
Salary / Rate: £80000 - £125000 per annum, Benefits: Hybrid & flexible working, 9/75 work pattern, private healthcare, & more
Posted: 2026-07-15 13:55:05
-
Senior Simulation Engineer - Systems Engineering
Newton Colmore is working with an instrumentation manufacturer in Cambridge, and we are assisting them in their search for a senior simulation engineer.
This is an exciting period of growth for this company, that work on several different product lines, from state-of-the-art airport scanning technology to top secret RADAR systems.
You will be aiming to build and test physics-based models at the edge of what's possible
What you will be doing.
You will model and analyse complex systems using MATLAB/Simulink, working alongside a multidisciplinary team of scientists, engineers, and designers.
This isn't incremental work — you'll be applying deep engineering fundamentals to problems that directly impact people's lives.
What you can bring.
You will need to have strong domain knowledge of MATALB and Simulink, ideally applied to systems engineering.
This will need to include physics-based modelling and model-based systems engineering, with test bench development and code revision.
You will need to be naturally curious, adaptable, and any knowledge of signal processing or Simulink HDL would be highly desirable.
Why this role
The company offer an environment that promotes pushing the boundaries of what is possible and trust their people to do great work.
You will almost exclusively be working on new product development, and as well as autonomy, they make sure you have the right mentoring whenever you need it.
They are offering tailored packages and can modify the seniority of the role to suit the right person.
The package has a full suite of benefits including monetary bonuses and market-beating pension contributions.
Interested?
If you would like to find out more about this exciting role then make a confidential application now and a member of our team will be in touch with all the details.
....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: Tailored package + bonus
Posted: 2026-07-15 11:14:26
-
Experimental Physicist - Instrument Design
Newton Colmore is searching for an experimental physicist who enjoys solving highly complex problems, to join our client in Cambridge.
This is a rare chance to apply deep scientific expertise to problems that genuinely matter — keeping people safe, ranging from airport scanner technology through to objection detection systems.
You will use your physics insight and research skills to explore the art of the possible: designing investigations, inventing new approaches, and seeing your ideas realised through rapid prototyping and development.
The role spans invention, analysis, computational modelling, and prototype design through to manufacturing transfer.
What makes this role different
No two projects are the same.
You'll work with and lead expert multi-disciplinary teams of scientists and engineers, tackling cutting-edge challenges across a uniquely broad range of physics domains.
Here are some of the physics domains you will be working across.
Quantum technologies
Sensing, PNT, computing & communications
Electromagnetics
Propagation, plasmas & interaction with electronics
Semiconductor physics
Junction behaviour, logic, thermal & sensing
Optics & photonics
Lasers, imaging, fibre optics & fluorescence
Sonar & acoustics
Ultrasound & acoustic communications
Algorithms & AI
About you
You will need to have a track record of academic excellence and hold a relevant postgraduate degree (or equivalent professional experience).
Beyond that, the client is genuinely open on experience level and domain knowledge, with a focus on finding great people who love to do great work.
What is on offer.
Employee-owned trust — flat structure, real autonomy
High employer pension + monetary bonuses
Private medical insurance for you and your family
25 days holiday + bank holidays
Enhanced family-friendly leave
EV leasing & Cycle to Work scheme
On-site gym + sports & social clubs
Theatre & local sports facility discounts
Candidates must be eligible for UK security clearance.
....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: Tailored package + bonus
Posted: 2026-07-15 11:13:43
-
Field Service Engineer
Falkirk
£32,000 - £38,000 Basic + Full OEM Training + Stability + Job Satisfaction + Work-Life Balance + Company Van + Fuel Card + Private Use + Tools + Healthcare + Monday-Friday + Bonus
Solidify your career as a Field Service Engineer with a company that will invest in your future.
Receive full manufacturer training to become a specialist within the industry while enjoying excellent job satisfaction, a healthy work-life balance, and long-term career stability.
Join a business that values its engineers and offers continuous support, development, and an excellent benefits package.
This market-leading company manufactures vehicle wash systems for commercial and industrial settings.
Due to continued growth, they are looking for an additional Field Service Engineer to join their highly skilled team.
This is an excellent opportunity to work with cutting-edge technology and be part of an expanding organisation.
The Field Service Engineer Role Will Include:
Full OEM manufacturer training
Service, maintenance, repairs and breakdowns of vehicle wash systems
Field service role covering Falkirk and the surrounding areas
The Successful Field Service Engineer Will Have:
Any mechanical background considered (e.g.
hand tools, mechanical fitting, maintenance)
Confident with electrical fault finding, including three-phase systems and multimeters
Happy to cover the Falkirk area
Full UK driving licence
Please apply or send your CV for immediate consideration.
Keywords: Field Service Engineer, Trainee Field Service Engineer, Mechanical Engineer, Electrical Engineer, Maintenance Engineer, Service Engineer, Installation Engineer, Mechanical Fitter, Electro-Mechanical Engineer, Plant Engineer, HGV Engineer, PSV Engineer, Bus Engineer, Commercial Vehicle Engineer, LCV Engineer, Diesel Engineer, White Goods Engineer, Coffee Engineer, Electrician, Mechanic, Automatic Door Engineer, Vehicle Wash Engineer, Fault Finding, Falkirk, Stirling, Cumbernauld, Grangemouth, Linlithgow, Bonnybridge, Denny, Larbert, Alloa, Dunfermline, Livingston, Edinburgh, Glasgow, FK1, FK2, FK3, FK4, FK5, FK6, FK7, FK8, EH47, EH48, G67, ML6.
This vacancy is being advertised by Future Engineering Recruitment Ltd.
The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Please visit our website at Future Engineering Recruitment to view other positions we are currently be handling.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal right to work in the United Kingdom.
Candidates who do not currently hold this right, or whose application is pending, should not apply as their details will not be processed.
Whilst we endeavour to respond to all applicants, due to the volume of applications received, we can only guarantee contact with shortlisted candidates. ....Read more...
Type: Permanent Location: Falkirk, Scotland
Start: asap
Duration: perm
Salary / Rate: £32000 - £38000 per annum + Training + Stability + Work life balance
Posted: 2026-07-14 11:26:00
-
Hybrid | Monday to Friday
An exciting opportunity has arisen for an experienced Product Marketing Manager to join a well-established, leading manufacturer.
Joining during an exciting period of growth, you will own the UK product marketing strategy, driving product positioning, go-to-market activity, product launches and lifecycle management.
Working closely with commercial and product teams, you will strengthen market presence and support continued business growth.
Location: Haywards Heath, Burgess Hill, Crawley, Horsham, East Grinstead, Brighton, Lewes, Uckfield, Eastbourne, Worthing, Redhill, Reigate, Tunbridge Wells, Sevenoaks, Tonbridge and surrounding areas.
What's in it for you as a Product Marketing Manager;
Competitive salary of £50,000 - £65,000, depending on experience
Pension scheme
Ongoing training and development
Monday to Friday working pattern
Hybrid working
The ideal Product Marketing Manager will have:
Proven experience working as a Product Marketing Manager, Product Manager, Technical Marketing Manager or in a similar role
Experience within manufacturing, engineering, or another technical sector
Strong understanding of product lifecycle management and go-to-market strategies
A successful track record delivering product launches
Strong commercial awareness with the ability to identify market opportunities
Experience analysing product data, market intelligence, customer insights and competitor activity
Excellent communication and stakeholder management skills
Full UK driving licence
Key Responsibilities of a Product Marketing Manager
Develop and deliver the UK product marketing strategy
Manage the complete product lifecycle, from initial launch through to portfolio optimisation
Create and implement go-to-market strategies for new and existing products
Develop product positioning, messaging and value propositions
Lead new product launches and support wider commercial campaigns
Analyse customer, market and competitor trends to identify growth opportunities
Produce product literature, technical content and sales enablement materials
Collaborate with Sales, Technical and Product Development teams to maximise product performance
Represent the business at customer meetings, exhibitions and industry events
E3 Recruitment would welcome applications from candidates with experience as a Product Marketing Manager, Product Manager, Technical Marketing Manager, Marketing Manager or Product Specialist within manufacturing, engineering, energy, construction or other technical industries.
To apply for this Product Marketing Manager role, please click "Apply Now" and attach your most up-to-date CV.
Thank you,
Fiona McSheffreyE3 Recruitment ....Read more...
Type: Permanent Location: Haywards Heath, England
Start: ASAP
Salary / Rate: £50000.00 - £65000.00 per annum
Posted: 2026-07-14 09:28:54
-
Design Manager
Maynooth ( EU opportunities available too )
€70,000 - €120,000 + Package + Holidays + Pension + Career Progression + ‘Immediate Start'
Join a high-performing, fast-growing contractor delivering complex, high-value (£100m+) mission-critical projects across Europe.
This is a rare opportunity for a driven Design Manager to take ownership of technically challenging builds in the data centre, pharmaceutical, and advanced logistics sectors - while stepping into a clear and supported path towards Senior Management and ultimately Director level.
You'll be part of a dynamic, forward-thinking team trusted by blue-chip clients and known for quality, innovation, and rapid career development.
In this role, you'll take full ownership of the design process, from coordination through to technical assurance and site integration.
Working alongside the project team, consultants, and subcontractors, you'll manage the flow of design information and ensure alignment with programme, budget, and quality expectations.
You'll play a key role in bridging the gap between concept and construction - making sure every design detail is ready, compliant, and buildable.
The role will suit candidates with a background in MEP or Build (CSA) who are confident in navigating the technical design process, BIM coordination, and working in a fast-paced delivery environment.
This is a site based role for a major confidential data centre client.
Applicants must be flexible to travel and have relevant UK / EU project experience Your Role as Design Manager Will Include:
Managing and coordinating the full design process, aligning with client and construction requirements
Leading design meetings with clients, consultants, and subcontractors
Reviewing and managing design deliverables including drawings, technical submittals, and packages
Ensuring quality control through site inspections and design reviews
Overseeing completion of as-built packages and final design documentation
As a Design Manager, You Will Have:
A background in MEP, Architectural, Structural, or Civil Engineering
Experience managing technical design on major construction projects
Proficiency in BIM and CAD tools, with a good grasp of digital workflows
Full time role in Maynooth
Keywords: Maynooth, Co.
Kildare, Kildare, Leixlip, Celbridge, Lucan, Clane, Naas, Dublin West, Dublin 15, Greater Dublin Area, Leinster, Ireland, Design Manager, Senior Design Manager, MEP Design Manager, Technical Manager, Engineering Manager, Design Lead, Project Design Manager, Pre-Construction Design Manager, MEP, Mechanical, Electrical, Building Services, HVAC, LV, HV, CSA, Design Coordination, Technical Services, Industrial Construction, Mission-Critical Projects, Advanced Manufacturing, Life Sciences, Pharmaceutical, Logistics, Warehousing, Fit-Out, Design & Build, BIM, Revit, Consultant Management, Value Engineering, Pre-Construction ....Read more...
Type: Permanent Location: Maynooth, Republic of Ireland
Start: ASAP
Duration: permanent role
Salary / Rate: €70000 - €120000 per annum + + Travel Allowance + Bonus
Posted: 2026-07-13 15:18:37
-
Regulatory Affairs Specialist - Medical Devices - Cambridge
A growing technology and product development organisation in Cambridge is looking to appoint a Regulatory Affairs Specialist to support a wide range of innovative projects.
This role sits within a team that works closely with engineers, scientists and designers, helping them bring complex ideas to life while ensuring that every development pathway aligns with global regulatory expectations.
The work is varied, fast‑moving and highly collaborative, giving you the chance to contribute to breakthrough technologies across both medical and non‑medical sectors.
You will be joining a quality and regulatory function that plays a central role in maintaining and improving the company's management systems.
Rather than simply reviewing documents, this team is embedded in project activity, offering practical guidance that shapes product development from the earliest stages.
Their work ensures that internal processes remain compliant with international standards and that clients receive the assurance they expect from a world‑class development partner.
In this position, you will provide regulatory support across the business, working with multidisciplinary teams and assisting senior members of the QA/RA group with the ongoing operation of the quality management system.
The role offers exposure to a wide range of market areas, giving you the opportunity to broaden your regulatory knowledge and deepen your experience across multiple industries.
You will be expected to apply your understanding of standards such as ISO 9001, ISO 13485 and FDA 21 CFR 820, helping teams navigate compliance requirements while still enabling innovation.
A key part of your work will involve monitoring changes in international regulations and standards, interpreting what they mean for the organisation, and communicating updates to colleagues.
You will contribute to internal improvement initiatives, support external audit activities, and help ensure that quality and regulatory processes remain robust, efficient and aligned with business needs.
This role requires someone who can balance the freedom needed for creative problem‑solving with the discipline required for regulated product development, finding pragmatic solutions that work in real‑world commercial environments.
To succeed, you will need to be a clear thinker who can work independently while supporting and enabling others.
Strong communication skills are essential, as you will be building relationships across a wide range of stakeholders and taking ownership of initiatives that improve the way the business operates.
You should be able to demonstrate experience in developing or contributing to regulatory strategies, interpreting regulatory requirements, and understanding the implications for downstream processes.
Knowledge of medical device compliance will be particularly valuable.
It is expected that you will hold a relevant degree that has supported your move into a Regulatory Affairs position within the medical devices sector.
It will also be important that you have contributed to a medical device that has progressed from early development through to commercial release, giving you a clear understanding of the full lifecycle and the regulatory considerations at each stage.
This is an excellent opportunity to join a forward‑thinking organisation where you can develop your expertise, contribute to meaningful innovation and play a key role in shaping how new technologies reach the market.
If you have regulatory affairs experience and are looking for a challenging and rewarding role within a growing organisation, then apply now.
I expect strong interest in this position, and the company is looking to move quickly, so I would recommend submitting your application immediately or risk missing out.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices, Biotech and DeepTech recruitment at Newton Colmore, on +44 121 268 2240, or make an application and one of our team will be in touch. ....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: Pension, bonus, medical etc.
Posted: 2026-07-13 12:01:23
-
Electronics Engineer Consultant - Security Clearance - Cambridge
A new design consultancy, based in Cambridge, are currently looking for a Electronics Engineer Consultant to add to the team of experienced experts, specifically with a focus on security cleared projects.
Although this is a new design consultancy, they have the backing of larger companies meaning you still have the job security of working for a large company.
You will also have benefits including pension, share purchase schemes, healthcare, life assurance and other excellent benefits not normally available to smaller organisations.
We are looking for an Electronics Engineer who has ideally worked on MOD, Security Clearance or other sensitive technologies.
Due to the nature of consultancy services, your electronics experience could be across a number of fields such as RF Engineering, Microwave Electronics, Analogue Electronics, Sensors Technologies, PCB Electronics or other complex electronics design.
It will also be ideal if you have specific Firmware, Embedded or other software experience.
Due to the nature of work, you must already hold or be able to obtain security clearance.
Apart from the benefits, you will be rewarded with an excellent salary, career opportunities and a continued skills training to keep you at the forefront of technologies.
This is a rare opportunity to be involved with a design consultancy at the ground level, meaning future career development will be more likely than with other consultancies or companies.
Due to this, I'm expecting a lot of interest in this role.
If you are interested in the role, apply now or risk missing out.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices recruitment and Scientific recruitment specialists Newton Colmore Consulting, on +44 121 268 2240 or make an application and one of our team at Newton Colmore Consulting will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Data Science, Healthcare Communications.
Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance and Field Service Engineering sectors.
....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: Negotiable
Posted: 2026-07-13 12:01:03
-
Senior Mechanical Engineer - Biotech Mechatronics - Cambridge
A spin-out Biotech company, based in Cambridge, is currently hiring several Senior Mechanical Engineers to join them and help accelerate the proof of concept, design, development, building, and testing of a novel life-saving biotech manufacturing device.
Your focus will be accelerating the proof of concept, design, development, building, and testing of the hardware of this new biotech device, collaborating with some excellent Medical Devices Physicists, Scientists, Electronics Engineers, and Design Engineers.
This role involves working on the design and development of this biotech manufacturing device, using 3D CAD.
Therefore, specific CAD experience will be essential, ideally SOLIDWORKS.
We need senior-level candidates, someone who has worked on mechatronics, automation, robotics, precision devices or another complex electro-mechanical technology.
Due to the size of this company, you will be exposure to other areas of the business, including third-party meetings and attending Biotech, Medical Devices and Science conferences and trade shows.
Consequently, it would be ideal if you have previously worked for a start-up/scale-up company or worked for a Medical Devices/Biotech/Scientific Design Consultancy and know what it's like to wear multiple hats when needed.
Experience in Medical Devices, Scientific or Biotech companies is not essential; we can also look at candidates from other complex sectors.
The technology you will be working on will save lives.
I can provide more details once you have made an application.
Most candidates I have spoken with find the work rewarding due to the impact this work will have on lives.
It is expected that you would hold a degree and a masters in a related Medical Devices, Mechanical Engineering, Design Engineering, Electronics Engineering, or another relevant scientific subject that led you into a Mechanical Engineer role.
You will also be rewarded with an excellent starting salary, enhanced pension, bonus, healthcare, other benefits, and future career development as the company grows while also working in an interesting field on a product that could help a lot of people.
As this is an exciting role, joining a start-up company at the beginning of their journey, I'm expecting a lot of interest in the role.
So, if you are interested, please apply straight away or risk missing out to someone else.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery recruitment specialists, Newton Colmore, on +44 121 268 2240 or submit an application, and a member of our team at Newton Colmore will be in touch with you. ....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: bonus, enhanced pension
Posted: 2026-07-13 12:00:28
-
Medical Devices Consultant - Senior Mechanical Engineer - Cambridge
Due to the growth of a leading Medical Devices organisation, we are currently seeking a Senior Mechanical Engineer, Project Manager, Medical Devices Inventor, or Mechanical Design Consultant for a newly approved role.
The company is based in Cambridge and boasts some of the most impressive labs globally, which they are currently enhancing even further.
You will collaborate with other experts in Medical Devices who have backgrounds in Mechanical Engineering, Mechanical Design, Electronics Design, Electronics Engineering, Physical Engineering, Biomedical Sciences, and various other skills essential for inventing Medical Technology.
Consequently, teamwork will be crucial.
In this role, you will lead projects, necessitating experience as a consultant, project manager, or another role involving interactions with third parties.
Additionally, you will apply your skills hands-on, directly contributing to the development of new Medical Devices.
We require several years of experience in Mechanical Design of Medical Devices.
Familiarity with any 3D CAD tool is acceptable, as we understand that you can be trained on the necessary tools when required.
However, knowledge of SolidWorks would be advantageous.
Most individuals in similar roles hold a degree in a Mechanical Engineering field, but experience takes precedence.
In terms of experience, we welcome candidates ranging from those stepping up to a Senior Mechanical Engineer role to individuals with several years of experience as a Medical Devices Consultant or Senior Mechanical Engineer.
This organisation has an outstanding track record of fostering continuous learning to keep you at the forefront of the Medical Devices sector.
Consequently, opportunities for career and skills development are always available.
In addition to these benefits, you will receive an excellent salary (commensurate with your level of experience), a substantial bonus, a generous pension plan, healthcare coverage, complimentary meals throughout the day, life assurance, access to social clubs, wellness programs, an onsite gym, and other exceptional perks that are not commonly offered by most companies.
We anticipate substantial interest in this role, so if you are interested, we recommend submitting your application promptly.
The organisation is open to candidates with varying levels of experience.
If you possess some of the required skills but not all, it may still be worth applying as training could be provided (though you must have industry experience as a Mechanical Engineer or Mechanical Designer for Medical Devices as a minimum).
For more information, please feel free to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, at +44 121 268 2240.
Alternatively, you can submit an application, and a member of our team at Newton Colmore will contact you.
Newton Colmore Consulting is a specialised recruitment company operating within the fields of Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors. ....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: Negotiable
Posted: 2026-07-13 11:59:55
-
Principal Mechanical Design Engineer - Medical Devices - Cambridge
A growing Medical Devices team, based in Cambridge, is currently seeking an experienced Mechanical Design Engineer to lead the development of cutting-edge Medical Devices in the fields of Health Technology, Biotech, and Wearable Tech.
The ideal candidate will have a proven track record of developing devices to ISO 13485 standards that have successfully reached the market, spanning various sectors within Medical Devices.
In addition to past experience in inventing and designing Medical Devices, candidates are expected to hold a degree in a relevant field that led them into Mechanical Design or the Medical Devices industry.
You will collaborate with a multidisciplinary team of experts, including Industrial Designers, Electronics Engineers, Physicists, Software Engineers, and Scientists.
Some projects may require you to take the lead, which is why this is a principal-level design engineer role.
This company places a strong emphasis on providing continuous training and development to help you advance your career.
In addition to career development and the opportunity to work on cutting-edge technologies, you will receive an excellent salary, annual bonuses, healthcare coverage, gym membership, an enhanced pension, and other outstanding benefits.
The company's expansion is driven by successful growth plans, including the construction of brand-new labs.
If you are seeking an exciting and challenging career, we recommend submitting an application now to start the recruitment process.
The organisation frequently creates roles for individuals with the right skills.
Therefore, even if you believe the role may be slightly too senior or junior for you, we encourage you to apply so that we can explore potential opportunities together.
For further information, please do not hesitate to contact Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, at 0121 268 2240.
Alternatively, you can submit an application, and a member of our team at Newton Colmore will be in touch.
Newton Colmore Consulting is a specialist recruitment company focused on the Medical Devices, Science, and Machine Learning fields. ....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: Negotiable
Posted: 2026-07-13 11:59:23
-
Embedded Software Engineer - Security Clearance - Cambridge
A growing spinout security technology company, based in Cambridge, is currently seeking an experienced Embedded Software Engineer to assist with the development, modification, and enhancement of various security technologies.
Your focus will span across radio, satellite, communications, radar, sensors, and other complex technologies used in the defence, aerospace, telecommunications, and other cutting-edge sectors, where you will contribute to the development of new technologies.
You will collaborate with a team of experts, including electronics design engineers, software engineers, mechanical engineers, physicists, and other specialists.
You won't necessarily need prior experience in the specific sector, as this is trainable, but you should have substantial experience in developing embedded systems using C/C++ programming languages.
This company provides bespoke products and services for clients, ensuring that your projects will always be unique, presenting their own set of problems and challenges to keep you engaged.
In addition to client projects, you will be involved in developing new versions of existing technology and improving current versions, offering a diverse and engaging role that will keep you interested for the long term.
While experience in telecommunications, aerospace, scientific, radar, radio, or other complex technologies that involve communication between devices would be ideal, it is not essential.
Your experience as an Embedded Software Engineer is more crucial than the specific sector.
Certain roles may require security clearance, typically necessitating a British passport with no criminal record or a history of residing in the UK and paying taxes for several years (also with no criminal record).
This role has arisen due to the company's growth.
They take pride in investing in their staff by providing continuous training to support your career development.
They have received awards for their commitment to staff development.
In addition to award-winning training, career growth, and varied and unique work, you will receive a competitive starting salary, bonuses, pension contributions, medical insurance, life assurance, free parking, and other excellent benefits.
There are currently several openings for Embedded Software Engineers within the company, so they will consider candidates with different levels of experience, from those early in their careers to senior candidates with years of experience.
Salary will be determined based on experience, and there may be new roles approved in the future.
If you are interested, we recommend submitting your application now to avoid missing out.
For further information, please do not hesitate to call Andrew Welsh, Director of Medical Devices Recruitment and Scientific Recruitment Specialist at Newton Colmore, on +44 121 268 2240, or submit an application, and a member of our Newton Colmore team will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors. ....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: Negotiable
Posted: 2026-07-13 11:58:35
