-
JOB DESCRIPTION
Position Summary: This position is responsible for developing, instituting, and overseeing all aspects of Environmental, Health, Safety and Corporate Compliance.
This includes but is not limited to ensuring the company complies with all federal and state health, safety and environmental laws, regulations and reporting standards.
Essential Functions:
Works with all personnel at the facility to make sure all safety and environmental regulations are met and are being followed;
Primarily responsible for both the overview of compliance as well as day-to-day operations with respect to safety and regulatory permits and reports.
Ensure all are met with best practices and are compliant.
This pertains to Federal, State, and Local regulations i.e.
RCRA, EPA reporting requirements both directly to the EPA as well as those governed by Missouri DNR Air Pollution and HAZ WASTE;
Conduct and coordinate on-site daily inspections to audit physical conditions and safe work practices.
Including but not limited to: PPE for specific tasks, Emission Points, Work Permits, General Housekeeping, Spill Kits, Satellite and Pre-Transport Waste Storage Areas, Fire Extinguishers, Shower and Eye Wash, etc.;
Be aware concerning all city, state and federal compliance regulations;
Conduct and improve training programs related to all aspects of safety and compliance in the facility for all personnel.
This includes but not limited to: new employee training and refreshers, forklift safety, OSHA, hazwoper, contractor orientation, FOT/IATA, etc.
All training should be conducted in a timely manner and ensure additional process specific trainings are sufficient to maintain safety for employees.
Maintain and update all plans required at the facility, including but not limited to: General Operating Permit, Hazardous Waste Generator Compliance, Storm water Pollution Prevention Plan, Spill Prevention Control and Countermeasures, Emergency Response Plan, Compressed Gas Plan, Contingency Plans, Hazard Communication Program and Security Plans;
Essential reports such as TRI, Tier II, RMP, Quarterly and Biennial Waste Reporting (and their due dates) is the responsibility of your department.
Assistance will be given from other staff to prepare and maintain this data;
Participate and help conduct Safety Committee meetings;
Works closely with HR manager and Vice President/CFO to become responsible for the hands-on administration of the workers' compensation program.
Maintain the OSHA 300 log and tracking.
Manage medical monitoring program;
Maintain and improve environmental compliance programs related to hazardous wastes, air permitting, water pollution control, and community right-to-know programs;
Select and maintain safety equipment and safety supplies on site.
To include purchasing and keeping track of the supplies and managing the costs of these supplies;
Reduce waste generation and costs of disposal.
Upgrade monitoring, testing and instrumentation of waste and byproducts.
Schedule and maintain all documentation related to all waste pickups, including certifying and recertifying waste profiles;
Improve overall safety, housekeeping and reliability of plant work areas and compliance systems;
Member of the PSM team;
Implement and coordinate the documentation and schedule for preventative maintenance of equipment through the Faciliworks program.
Maintain, create and close work orders.
Keep Asset List up to date within Faciliworks database.
Train all maintenance personnel on these procedures and manage to ensure proper procedures are followed;
Ensure all permits (LOTO, Hot Work, Confined Space Entry), as well as MOC's are done correctly, and properly filed and archived.
Become proficient in generating, reviewing and updating SDS's and Labels for our product line.
This will be a multi-member team as GHS is being implemented in 2015, however, in 2016 and future years' maintenance of this system will become part of your department;
Supervise, coach, motivate and develop staff.
Minimum Requirements:
Bachelor's degree in environmental management, Chemistry, Engineering, or a related discipline, or high school diploma if degree with 5 years or more of direct experience in Process Safety Management, or suitable combination of education and relevant experience as described;
Specialized technical/aptitude experience: minimum of 3 years' experience in a manufacturing environment and demonstrated proficiency with manufacturing processes.
Previous work and/or substantial knowledge of, including commonly used concepts, practices and procedures, within the thermoset polymer industry is a strongly considered asset;
Demonstrated comprehensive knowledge of office and facilities coordination and basic leadership and management knowledge; (if applicable to position)
Demonstrated organization, facilitation, communication and presentation skills; (if applicable to position)
Ability to prioritize workflow and organize diverse material and ability to handle multiple, competing and changing priorities; ability to perform effectively without supervision and within established time limits and ongoing deadlines;
Ability to interact and communicate effectively and professionally verbally and in writing, and to provide exceptional service internally and externally;
Relevant computer skills for this position include knowledge and experience with Microsoft Office applications (Word, Excel, PowerPoint) and web-based applications.
Experience using SAGE Platinum for Windows preferred.
Displays adaptability in learning the use of relevant software and displays comprehension of fundamental computer practices and database management;
Demonstrated ability to serve as a knowledgeable resource to the organization's management team that provides leadership and direction;
Demonstrated leadership and vision managing staff groups and major projects or initiatives;
Outstanding interpersonal relationship building and employee coaching and development skills.
Benefits and Compensation
The pay range for applicants in this position generally ranges between $120,000.00/year and $140,000/year.
The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law.
In addition to career advancement and growth, continuous training, and mentoring opportunities, Arnette Polymers offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans.
Arnette Polymers is a division of The Stonhard Group, an RPM International company (NYSE: RPM) that is headquartered in Maple Shade, NJ and has more than 100 years of experience manufacturing and installing high performance, seamless floors throughout the world.
We manufacture and install long-term floor, wall and lining solutions to markets including, but not limited to: food & beverage, general manufacturing, pharmaceutical, chemical processing, education, healthcare, government, technology and hospitality.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
Pay: $120,000.00 - $140,00.00 per yearApply for this ad Online! ....Read more...
Type: Permanent Location: Richmond, Missouri
Posted: 2026-10-10 23:11:53
-
JOB DESCRIPTION
Position Summary: This position is responsible for developing, instituting, and overseeing all aspects of Environmental, Health, Safety and Corporate Compliance.
This includes but is not limited to ensuring the company complies with all federal and state health, safety and environmental laws, regulations and reporting standards.
Essential Functions:
Works with all personnel at the facility to make sure all safety and environmental regulations are met and are being followed;
Primarily responsible for both the overview of compliance as well as day-to-day operations with respect to safety and regulatory permits and reports.
Ensure all are met with best practices and are compliant.
This pertains to Federal, State, and Local regulations i.e.
RCRA, EPA reporting requirements both directly to the EPA as well as those governed by Missouri DNR Air Pollution and HAZ WASTE;
Conduct and coordinate on-site daily inspections to audit physical conditions and safe work practices.
Including but not limited to: PPE for specific tasks, Emission Points, Work Permits, General Housekeeping, Spill Kits, Satellite and Pre-Transport Waste Storage Areas, Fire Extinguishers, Shower and Eye Wash, etc.;
Be aware concerning all city, state and federal compliance regulations;
Conduct and improve training programs related to all aspects of safety and compliance in the facility for all personnel.
This includes but not limited to: new employee training and refreshers, forklift safety, OSHA, hazwoper, contractor orientation, FOT/IATA, etc.
All training should be conducted in a timely manner and ensure additional process specific trainings are sufficient to maintain safety for employees.
Maintain and update all plans required at the facility, including but not limited to: General Operating Permit, Hazardous Waste Generator Compliance, Storm water Pollution Prevention Plan, Spill Prevention Control and Countermeasures, Emergency Response Plan, Compressed Gas Plan, Contingency Plans, Hazard Communication Program and Security Plans;
Essential reports such as TRI, Tier II, RMP, Quarterly and Biennial Waste Reporting (and their due dates) is the responsibility of your department.
Assistance will be given from other staff to prepare and maintain this data;
Participate and help conduct Safety Committee meetings;
Works closely with HR manager and Vice President/CFO to become responsible for the hands-on administration of the workers' compensation program.
Maintain the OSHA 300 log and tracking.
Manage medical monitoring program;
Maintain and improve environmental compliance programs related to hazardous wastes, air permitting, water pollution control, and community right-to-know programs;
Select and maintain safety equipment and safety supplies on site.
To include purchasing and keeping track of the supplies and managing the costs of these supplies;
Reduce waste generation and costs of disposal.
Upgrade monitoring, testing and instrumentation of waste and byproducts.
Schedule and maintain all documentation related to all waste pickups, including certifying and recertifying waste profiles;
Improve overall safety, housekeeping and reliability of plant work areas and compliance systems;
Member of the PSM team;
Implement and coordinate the documentation and schedule for preventative maintenance of equipment through the Faciliworks program.
Maintain, create and close work orders.
Keep Asset List up to date within Faciliworks database.
Train all maintenance personnel on these procedures and manage to ensure proper procedures are followed;
Ensure all permits (LOTO, Hot Work, Confined Space Entry), as well as MOC's are done correctly, and properly filed and archived.
Become proficient in generating, reviewing and updating SDS's and Labels for our product line.
This will be a multi-member team as GHS is being implemented in 2015, however, in 2016 and future years' maintenance of this system will become part of your department;
Supervise, coach, motivate and develop staff.
Minimum Requirements:
Bachelor's degree in environmental management, Chemistry, Engineering, or a related discipline, or high school diploma if degree with 5 years or more of direct experience in Process Safety Management, or suitable combination of education and relevant experience as described;
Specialized technical/aptitude experience: minimum of 3 years' experience in a manufacturing environment and demonstrated proficiency with manufacturing processes.
Previous work and/or substantial knowledge of, including commonly used concepts, practices and procedures, within the thermoset polymer industry is a strongly considered asset;
Demonstrated comprehensive knowledge of office and facilities coordination and basic leadership and management knowledge; (if applicable to position)
Demonstrated organization, facilitation, communication and presentation skills; (if applicable to position)
Ability to prioritize workflow and organize diverse material and ability to handle multiple, competing and changing priorities; ability to perform effectively without supervision and within established time limits and ongoing deadlines;
Ability to interact and communicate effectively and professionally verbally and in writing, and to provide exceptional service internally and externally;
Relevant computer skills for this position include knowledge and experience with Microsoft Office applications (Word, Excel, PowerPoint) and web-based applications.
Experience using SAGE Platinum for Windows preferred.
Displays adaptability in learning the use of relevant software and displays comprehension of fundamental computer practices and database management;
Demonstrated ability to serve as a knowledgeable resource to the organization's management team that provides leadership and direction;
Demonstrated leadership and vision managing staff groups and major projects or initiatives;
Outstanding interpersonal relationship building and employee coaching and development skills.
Benefits and Compensation
The pay range for applicants in this position generally ranges between $120,000.00/year and $140,000/year.
The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law.
In addition to career advancement and growth, continuous training, and mentoring opportunities, Arnette Polymers offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans.
Arnette Polymers is a division of The Stonhard Group, an RPM International company (NYSE: RPM) that is headquartered in Maple Shade, NJ and has more than 100 years of experience manufacturing and installing high performance, seamless floors throughout the world.
We manufacture and install long-term floor, wall and lining solutions to markets including, but not limited to: food & beverage, general manufacturing, pharmaceutical, chemical processing, education, healthcare, government, technology and hospitality.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
Pay: $120,000.00 - $140,00.00 per yearApply for this ad Online! ....Read more...
Type: Permanent Location: Richmond, Missouri
Posted: 2026-10-10 15:12:44
-
JOB DESCRIPTION
The Process Engineer is responsible for evaluating and improving processes within Stonhard manufacturing operations.
Additionally, the Process Engineer is responsible for implementation of continuous improvement initiatives, capital project support, production efficiency, maintenance process improvements, and equipment reliability.
Essential Functions
Lead root cause analysis for process failures.
Develop and maintain standard work instructions.
Develop and maintain Process Failure Mode Effect Analysis for areas of responsibility.
Improves production line efficiency to show a measurable increase in OEE.
Support maintenance in equipment troubleshooting.
Working knowledge of I/O, PLC, and 24V controls is preferred.
Programming a plus.
Experience with Manufacturing Execution Systems preferred.
Design and coordinate fabrication of manufacturing support components.
Support day-to-day production operations.
Re-engineer existing equipment to meet new optimization, reliability, safety, throughput, and process requirements.
Evaluate and make recommendations, which will increase output and decrease costs by addressing/improving workflow, ergonomics, time/motion characteristics, cycle-times, set-up times, waste, etc.
Confer with management and general staff to implement plans and recommendations.
Ensure CI project goals are met and sustained through the development of effective control plans.
Ensure Continuous Improvement processes and procedures are followed and adhered to through auditing and process confirmation practices.
Lead C.I.
initiatives in areas of 5S, Waste Reduction, Value-Stream Mapping, etc.
Ensure appropriate validations are completed as part of solution implementation.
Downtime Loss Analysis and Reduction - Start-up & Changeovers downtime improvement
Equipment failure (Structured failure analysis 5W's, Fishbone analysis)
Minimum Requirements
Bachelor's degree in engineering
Lean and/or Six Sigma preferred but not required.
Minimum 5 years of manufacturing experience preferably in a GMP environment.
Physical Requirements
While performing the duties of this position, the employee is regularly required to use hands to finger, handle, or feel and talk or hear.
The employee is frequently required to stand; walk and reach with hands and arms.
The employee is occasionally required to sit; stoop, kneel, crouch, or crawl.
The employee must regularly lift and /or move up to 10-25 pounds; frequently lift and/or move up to 50 pounds.
Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and ability to adjust focus.
Benefits and Compensation
The pay range for applicants in this position generally ranges between $65,000 and $75,000.
The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law.
In addition to career advancement and growth, continuous training, and mentoring opportunities, Stonhard offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Fort Wayne, Indiana
Posted: 2026-10-10 15:12:31
-
JOB DESCRIPTION
Position Summary: This position is responsible for developing, instituting, and overseeing all aspects of Environmental, Health, Safety and Corporate Compliance.
This includes but is not limited to ensuring the company complies with all federal and state health, safety and environmental laws, regulations and reporting standards.
Essential Functions:
Works with all personnel at the facility to make sure all safety and environmental regulations are met and are being followed;
Primarily responsible for both the overview of compliance as well as day-to-day operations with respect to safety and regulatory permits and reports.
Ensure all are met with best practices and are compliant.
This pertains to Federal, State, and Local regulations i.e.
RCRA, EPA reporting requirements both directly to the EPA as well as those governed by Missouri DNR Air Pollution and HAZ WASTE;
Conduct and coordinate on-site daily inspections to audit physical conditions and safe work practices.
Including but not limited to: PPE for specific tasks, Emission Points, Work Permits, General Housekeeping, Spill Kits, Satellite and Pre-Transport Waste Storage Areas, Fire Extinguishers, Shower and Eye Wash, etc.;
Be aware concerning all city, state and federal compliance regulations;
Conduct and improve training programs related to all aspects of safety and compliance in the facility for all personnel.
This includes but not limited to: new employee training and refreshers, forklift safety, OSHA, hazwoper, contractor orientation, FOT/IATA, etc.
All training should be conducted in a timely manner and ensure additional process specific trainings are sufficient to maintain safety for employees.
Maintain and update all plans required at the facility, including but not limited to: General Operating Permit, Hazardous Waste Generator Compliance, Storm water Pollution Prevention Plan, Spill Prevention Control and Countermeasures, Emergency Response Plan, Compressed Gas Plan, Contingency Plans, Hazard Communication Program and Security Plans;
Essential reports such as TRI, Tier II, RMP, Quarterly and Biennial Waste Reporting (and their due dates) is the responsibility of your department.
Assistance will be given from other staff to prepare and maintain this data;
Participate and help conduct Safety Committee meetings;
Works closely with HR manager and Vice President/CFO to become responsible for the hands-on administration of the workers' compensation program.
Maintain the OSHA 300 log and tracking.
Manage medical monitoring program;
Maintain and improve environmental compliance programs related to hazardous wastes, air permitting, water pollution control, and community right-to-know programs;
Select and maintain safety equipment and safety supplies on site.
To include purchasing and keeping track of the supplies and managing the costs of these supplies;
Reduce waste generation and costs of disposal.
Upgrade monitoring, testing and instrumentation of waste and byproducts.
Schedule and maintain all documentation related to all waste pickups, including certifying and recertifying waste profiles;
Improve overall safety, housekeeping and reliability of plant work areas and compliance systems;
Member of the PSM team;
Implement and coordinate the documentation and schedule for preventative maintenance of equipment through the Faciliworks program.
Maintain, create and close work orders.
Keep Asset List up to date within Faciliworks database.
Train all maintenance personnel on these procedures and manage to ensure proper procedures are followed;
Ensure all permits (LOTO, Hot Work, Confined Space Entry), as well as MOC's are done correctly, and properly filed and archived.
Become proficient in generating, reviewing and updating SDS's and Labels for our product line.
This will be a multi-member team as GHS is being implemented in 2015, however, in 2016 and future years' maintenance of this system will become part of your department;
Supervise, coach, motivate and develop staff.
Minimum Requirements:
Bachelor's degree in environmental management, Chemistry, Engineering, or a related discipline, or high school diploma if degree with 5 years or more of direct experience in Process Safety Management, or suitable combination of education and relevant experience as described;
Specialized technical/aptitude experience: minimum of 3 years' experience in a manufacturing environment and demonstrated proficiency with manufacturing processes.
Previous work and/or substantial knowledge of, including commonly used concepts, practices and procedures, within the thermoset polymer industry is a strongly considered asset;
Demonstrated comprehensive knowledge of office and facilities coordination and basic leadership and management knowledge; (if applicable to position)
Demonstrated organization, facilitation, communication and presentation skills; (if applicable to position)
Ability to prioritize workflow and organize diverse material and ability to handle multiple, competing and changing priorities; ability to perform effectively without supervision and within established time limits and ongoing deadlines;
Ability to interact and communicate effectively and professionally verbally and in writing, and to provide exceptional service internally and externally;
Relevant computer skills for this position include knowledge and experience with Microsoft Office applications (Word, Excel, PowerPoint) and web-based applications.
Experience using SAGE Platinum for Windows preferred.
Displays adaptability in learning the use of relevant software and displays comprehension of fundamental computer practices and database management;
Demonstrated ability to serve as a knowledgeable resource to the organization's management team that provides leadership and direction;
Demonstrated leadership and vision managing staff groups and major projects or initiatives;
Outstanding interpersonal relationship building and employee coaching and development skills.
Benefits and Compensation
The pay range for applicants in this position generally ranges between $120,000.00/year and $140,000/year.
The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law.
In addition to career advancement and growth, continuous training, and mentoring opportunities, Arnette Polymers offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans.
Arnette Polymers is a division of The Stonhard Group, an RPM International company (NYSE: RPM) that is headquartered in Maple Shade, NJ and has more than 100 years of experience manufacturing and installing high performance, seamless floors throughout the world.
We manufacture and install long-term floor, wall and lining solutions to markets including, but not limited to: food & beverage, general manufacturing, pharmaceutical, chemical processing, education, healthcare, government, technology and hospitality.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
Pay: $120,000.00 - $140,00.00 per yearApply for this ad Online! ....Read more...
Type: Permanent Location: Richmond, Missouri
Posted: 2026-10-10 15:12:28
-
JOB DESCRIPTION
The Global Director of Research & Development, Cleaners is responsible for leading Rust-Oleum's global cleaners technology platform and innovation pipeline.
This role provides strategic and technical leadership for the development, commercialization, quality improvement, and lifecycle management of cleaner, detergent, disinfectant, degreaser, and specialty surface care products across consumer and professional markets.
The successful candidate will establish and execute a global technology strategy, build world-class technical capabilities, and lead a high-performing team of scientists and engineers to deliver differentiated products that drive profitable growth.
The role requires close collaboration with Marketing, Manufacturing, Supply Chain, Regulatory, Quality, Sourcing, and Commercial teams across North America, EMEA, and other global regions.
The location for this role is based in Pleasant Prairie, WI a perfect and affordable location with close proximity two major US cities and international airports.
Key Responsibilities
Strategic Technology Leadership
Develop and execute the global cleaners technology roadmap aligned with business growth objectives.
Identify emerging technologies, consumer trends, regulatory developments, and competitive advancements to drive innovation.
Build and expand Rust-Oleum's cleaners capabilities across consumer, industrial, institutional, and specialty cleaning segments.
Lead technology scouting activities with suppliers, universities, startups, and industry partners.
Product Innovation & Commercialization
Lead the ideation, development, validation, scale-up, and launch of new cleaning technologies and products.
Manage a balanced portfolio of breakthrough innovations, line extensions, reformulations, cost reductions, and quality improvement initiatives.
Ensure strong technical substantiation supporting product claims, performance, safety, compliance, and customer value propositions.
Drive rapid commercialization and efficient project execution from concept through launch.
Knowledge, execution and strategy of internal and external manufacturing capabilities
Global R&D Team Leadership
Build, lead, mentor, and develop a high-performing global technical organization.
Recruit and retain top technical talent in formulation science, analytical chemistry, microbiology, surface science, and testing.
Establish career development, succession planning, and organizational capability-building initiatives.
Foster a culture of innovation, collaboration, accountability, inclusion, and continuous learning.
Technical Excellence
Provide deep scientific leadership in:
Household and industrial cleaning chemistry
Surfactants and detergents
Disinfection and antimicrobial technologies
Surface chemistry and compatibility
Formulation science
Performance testing and claim substantiation
Regulatory and stewardship requirements
Establish standardized testing methodologies and global performance validation protocols.
Drive knowledge sharing and technology transfer across regions and business units.
Cross-Functional Leadership
Partner closely with Marketing, Manufacturing, Operations, Supply Chain, Purchasing, Regulatory Affairs, and Quality teams.
Support manufacturing scale-up, troubleshooting, productivity improvements, and operational excellence initiatives.
Lead technical interactions with strategic customers, suppliers, and external partners.
Serve as the technical voice of the cleaners platform within the broader Rust-Oleum and RPM organizations.
Business Impact
Deliver innovation-driven sales growth and market expansion.
Support margin improvement through formulation optimization and cost-reduction initiatives.
Establish and monitor key innovation and R&D performance metrics.
Manage R&D budgets, capital investments, and resource allocation to maximize business impact.
Qualifications
Education
Ph.D.
preferred; M.S.
required in Chemistry, Chemical Engineering, Polymer Science, Materials Science, Surfactant Science, or related discipline.
Experience
15+ years of progressive R&D leadership experience in consumer cleaners organizations.
Proven success leading global product development organizations.
Demonstrated experience commercializing cleaning, detergent, home care, institutional, industrial, or adjacent specialty chemical products.
Experience managing geographically dispersed teams and global innovation portfolios.
Strong track record of translating technology into profitable business growth.
Technical Competencies
Expertise in cleaning formulations, surfactant systems, detergency mechanisms, and performance testing.
Strong understanding of formulation science, structure-property relationships, and product performance optimization.
Experience with regulatory requirements, product stewardship, and claim substantiation.
Familiarity with digital R&D tools, data analytics, AI-enabled formulation development, and innovation processes.
Leadership Competencies
Strategic thinker with strong business acumen.
Proven ability to lead organizational transformation and capability building.
Exceptional communication and influencing skills.
Strong project portfolio management capability.
Demonstrated success in developing people and building high-performing teams.
Results-oriented leader with a strong bias for action and execution.
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers (9.5) paid holidays and two floating holidays per year.
You are also eligible to earn three weeks of vacation on an annualized basis.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin
Posted: 2026-10-09 23:12:37
-
JOB DESCRIPTION
We are seeking an R&D Scientist and Technical Leader, a critical role within our R&D organization.
If you have expertise in waterborne chemistry and formulations knowledge in both architectural and industrial products, this is the opportunity you've been looking for.
You should also have an expert level of technical knowledge with a strong track record of product and process development, innovation, and commercialization in coating technologies.
You must also possess strong, demonstrated competencies and experience in project management accompanied by people and organizational leadership skills.
Technology Knowledge:
Expertise in broad ranges of coating chemistries particularly acrylic, epoxy, urethane, polyaspartics and sil(ox)anes etc.
Expertise in application and formulation science for various coating systems of primer, basecoat, topcoat systems for liquid waterborne, solventborne and 2K coatings along with expert understanding of DIY, Contractor, and OEM Coatings.
Strong command on analytical methods and structure-property relationship
Expert understanding of manufacturing process and product development
Technical Leadership:
Action Oriented - ability to make strategic decisions (technical and staff utilization) and influence leaders and scientist to execute those initiative while managing business strategy and value creation
Demonstrated skillset and track record in creating an environment to scout new ideas and innovation.
Continuous learning and intimate awareness of open literature and competitive landscape
Demonstrated ability to develop and execute project plan - time management, prioritization, managing the projects and R&D projects/teams and measuring progress.
Excellent effectiveness to allocate resources towards initiatives by working with cross-functional leadership
Demonstrated ability to communicate with project stakeholders and cross-functional teams, leadership and external scientific community.
People Leadership:
Outstanding personal and interpersonal skills - listening, compassion, motivating, inspiring, humor, patience, understanding diversity, negotiating etc.
Energetic, Driving and Inspiring
Action oriented, perseverance and results driven
Demonstrates Courage
Leadership (technical & managerial) command skills, conflict management
Continuous learning/growth and mentorship and teaching skills
Organization Leadership:
Ability to lead and interact with cross-functional teams in a matrixed organization
Agility to respond emerging business needs - strong change of management skills
Managing high stakes and challenging situation with all levels of organizations
Using, assessing the organizational processes and developing new processes to improve efficiency and quality
Demonstrate strong career ambition - potential to become top leader.
QUALIFICATIONS:
KNOWLEDGE:
Chemistry - Knowledge of the chemical composition, structure, and properties of substances and of the chemical processes and transformations that they undergo.
This includes uses of chemicals and their interactions, danger signs, production techniques, and disposal methods.
Mathematics - Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications.
Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
Administration and Management - Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources.
Customer and Personal Service - Knowledge of principles and processes for providing customer and personal services.
This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction.
Engineering and Technology - Knowledge of the practical application of engineering science and technology.
This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services.
At least 4 years of technical supervisory or management experience with a diverse workforce., M.S.
or equivalent science degree in Chemistry, must possess a strong knowledge of organic chemistry, or related scientific field, minimum 10 years technical experience in product development in specific area of expertise, strong understanding of manufacturing, Quality assurance, scale up procedures, applications, raw materials purchasing, regulatory matters and must be computer literate, 2 to 3 years successful working experience with marketing group.
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and generous PTO (vacation/sick days/parental leave).
Rust-Oleum offers (9.5) paid holidays and (2) floating holidays per year.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin
Posted: 2026-10-09 23:12:31
-
JOB DESCRIPTION
Employer Description:
Legend Brands is a growing multi-vertical manufacturer serving restoration, cleaning, and construction professionals; performance automotive cooling markets; fish hatchery and aquaculture operations; through a portfolio of industry-leading brands including Dri-Eaz, Mediclean, UnSmoke, OdorX, Sapphire Scientific, Prochem, Chemspec, Flex-A-Lite, and Marisource.
Legend Brands is hiring for a Design Engineer at our Arlington WA satellite location.
The Design Engineer is responsible for overseeing large Truck Mount manufacturing project management, which involves initial investigation of viability, cost, initial design, product research and prelim testing.
This position is unique, we are looking for a candidate that has not only design abilities, but mechanical and manufacturing experience as well.
Please apply directly on our careers page - https://hcwx.fa.us2.oraclecloud.com/hcmUI/CandidateExperience/en/sites/CX_2
Essential Duties
Follows product development process
Finalizes the initial concept to an Alpha Prototype design using all the same resources
Aids in refinement process of the initial prototype, incorporation into production, and customer acceptance
Manages Beta process for ground up designs or Preproduction process
Conducts all final testing with thorough documentation in drawings, manuals, and kit instructions
Manages full project documentation (Schedule/Logs/Test Data/Requirements/Statement of Work/Project Approval SS/ ETC) for each project
Designs CAD equipment based on project pillar requirements supplied by management and PDC for cfm required - (recovery), water pressure (psi) water volume (gpm)
Assists in final production implementation
Responds to Vendor and Customer interactions, as needed
Creates Engineering Change Orders.
Provides Testing / Data Acquisition
Completes Proto Fabrication and Design.
Assembles prototypes and test samples
Performs other related duties as assigned
Minimum Qualifications
Bachelor's degree in engineering or design related to products required (This is not an IT job)
Must have proficiency computer skills, including Microsoft Office Suite, D365 (or equivalent MRP)
Must have proficiency in SolidWorks
Strong aptitude for creating detailed blueprints and instructions
Must be able to multitask, prioritize, and manage time efficiently
Accurate and precise attention to detail
Must have exceptional verbal and written communication skills and interact with customers via phone and in-person
Must be able to read, write, and speak English language and be understood
Must have good mechanical aptitude
Must be driven and goal oriented and willing to take on new challenges and see them through
Design Engineer
I
is intended for individuals with a minimum of 1-2 years related work experience.
Requires knowledge and competent demonstration of the following within 6 months of hire:
Understanding in Legend Brands Design Process
MS Project
Design Engineer
II
is intended for individuals with a minimum of 5 years related work experience.
Requires working knowledge and competent demonstration of the following in addition to the requirements for Design Engineer I:
Must have in-depth knowledge of engineering and design principles
Must understand CAD drawings, bill of materials (MRP), SolidWorks, and PDM Vault
Organize plans and create schedules using MS Project
Estimate and establish cost parameters and budgets for design
Hiring Range
$80.2K - $97K DOE
Benefits
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, 10 paid holidays, generous paid time off, employer matching 401 (k)PLUS a company-sponsored pension, and more!
Additional Considerations • Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability• Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's
• All job offers are contingent upon satisfactory pre-employment drug test and background checksApply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2026-10-09 23:12:28
-
JOB DESCRIPTION
The Global Director of Research & Development, Cleaners is responsible for leading Rust-Oleum's global cleaners technology platform and innovation pipeline.
This role provides strategic and technical leadership for the development, commercialization, quality improvement, and lifecycle management of cleaner, detergent, disinfectant, degreaser, and specialty surface care products across consumer and professional markets.
The successful candidate will establish and execute a global technology strategy, build world-class technical capabilities, and lead a high-performing team of scientists and engineers to deliver differentiated products that drive profitable growth.
The role requires close collaboration with Marketing, Manufacturing, Supply Chain, Regulatory, Quality, Sourcing, and Commercial teams across North America, EMEA, and other global regions.
The location for this role is based in Pleasant Prairie, WI a perfect and affordable location with close proximity two major US cities and international airports.
Key Responsibilities
Strategic Technology Leadership
Develop and execute the global cleaners technology roadmap aligned with business growth objectives.
Identify emerging technologies, consumer trends, regulatory developments, and competitive advancements to drive innovation.
Build and expand Rust-Oleum's cleaners capabilities across consumer, industrial, institutional, and specialty cleaning segments.
Lead technology scouting activities with suppliers, universities, startups, and industry partners.
Product Innovation & Commercialization
Lead the ideation, development, validation, scale-up, and launch of new cleaning technologies and products.
Manage a balanced portfolio of breakthrough innovations, line extensions, reformulations, cost reductions, and quality improvement initiatives.
Ensure strong technical substantiation supporting product claims, performance, safety, compliance, and customer value propositions.
Drive rapid commercialization and efficient project execution from concept through launch.
Knowledge, execution and strategy of internal and external manufacturing capabilities
Global R&D Team Leadership
Build, lead, mentor, and develop a high-performing global technical organization.
Recruit and retain top technical talent in formulation science, analytical chemistry, microbiology, surface science, and testing.
Establish career development, succession planning, and organizational capability-building initiatives.
Foster a culture of innovation, collaboration, accountability, inclusion, and continuous learning.
Technical Excellence
Provide deep scientific leadership in:
Household and industrial cleaning chemistry
Surfactants and detergents
Disinfection and antimicrobial technologies
Surface chemistry and compatibility
Formulation science
Performance testing and claim substantiation
Regulatory and stewardship requirements
Establish standardized testing methodologies and global performance validation protocols.
Drive knowledge sharing and technology transfer across regions and business units.
Cross-Functional Leadership
Partner closely with Marketing, Manufacturing, Operations, Supply Chain, Purchasing, Regulatory Affairs, and Quality teams.
Support manufacturing scale-up, troubleshooting, productivity improvements, and operational excellence initiatives.
Lead technical interactions with strategic customers, suppliers, and external partners.
Serve as the technical voice of the cleaners platform within the broader Rust-Oleum and RPM organizations.
Business Impact
Deliver innovation-driven sales growth and market expansion.
Support margin improvement through formulation optimization and cost-reduction initiatives.
Establish and monitor key innovation and R&D performance metrics.
Manage R&D budgets, capital investments, and resource allocation to maximize business impact.
Qualifications
Education
Ph.D.
preferred; M.S.
required in Chemistry, Chemical Engineering, Polymer Science, Materials Science, Surfactant Science, or related discipline.
Experience
15+ years of progressive R&D leadership experience in consumer cleaners organizations.
Proven success leading global product development organizations.
Demonstrated experience commercializing cleaning, detergent, home care, institutional, industrial, or adjacent specialty chemical products.
Experience managing geographically dispersed teams and global innovation portfolios.
Strong track record of translating technology into profitable business growth.
Technical Competencies
Expertise in cleaning formulations, surfactant systems, detergency mechanisms, and performance testing.
Strong understanding of formulation science, structure-property relationships, and product performance optimization.
Experience with regulatory requirements, product stewardship, and claim substantiation.
Familiarity with digital R&D tools, data analytics, AI-enabled formulation development, and innovation processes.
Leadership Competencies
Strategic thinker with strong business acumen.
Proven ability to lead organizational transformation and capability building.
Exceptional communication and influencing skills.
Strong project portfolio management capability.
Demonstrated success in developing people and building high-performing teams.
Results-oriented leader with a strong bias for action and execution.
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers (9.5) paid holidays and two floating holidays per year.
You are also eligible to earn three weeks of vacation on an annualized basis.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin
Posted: 2026-10-09 23:12:10
-
JOB DESCRIPTION
Summer 2027 Internship Opportunity!
Title: Lean Manufacturing Intern
Location: Green Bay, Wisconsin
Summary:
Are you ready to kickstart your career with a company that's making a global impact? Carboline is looking for motivated, curious, and driven students to join our team for an unforgettable summer internship experience! This immersive 12-week program (Anticipated: May 17, 2027 - August 6, 2027), offers a unique opportunity to gain valuable experience, build lasting connections, and make a meaningful impact-all before heading back to campus.
Join our dynamic team at the Green Bay Plant as a Lean Manufacturing Intern, where you'll work directly under the guidance of the Plant Manager to drive impactful change across our operations.
This internship offers hands-on experience in lean principles, data-driven problem solving, and process optimization.
You'll be part of a fast-paced environment focused on eliminating waste, improving efficiency, and supporting key improvement initiatives that make a real difference on the production floor.
What You'll Gain:
Meaningful, hands-on experience working on impactful projects that contribute to Carboline's success.
Exposure to cross-functional collaboration and insight into how a global organization operates.
Professional development opportunities, including mentorship from experienced leaders.
A chance to enhance your skills and apply classroom knowledge in a real-world setting.
Participation in team-building activities and a workplace culture that values innovation, integrity, and growth.
Minimum Requirements:
Currently pursuing a degree in Industrial Engineering or a related field.
Preferred: completed of 30 credit hours.
Available to work 30-40 hours per week from May through August.
Strong communication, organization, teamwork, and interpersonal skills.
A proactive attitude and willingness to learn.
Physical Requirements:
Expect light physical activity and extended computer use (up to 8 hours/day).
Occasional visits to the production floor will require proper footwear and PPE.
Must be able to lift/move up to 15 pounds as needed.
Occasionally exposed to moving mechanical parts; noise level is typically moderate.
Students must have housing arrangements in or near Green Bay, WI for the summer, as housing allowance is not provided.
Essential Functions:
Spot inefficiencies and gather data to guide smarter resource allocation.
Join in on daily improvement huddles and contribute fresh ideas.
Support Focused Improvement Team (FIT) events - including Level 3 Kaizen initiatives.
Help with event prep and follow-up, ensuring momentum and results.
Track cost savings from your improvement efforts and celebrate the wins.
Brainstorm and implement performance-boosting ideas that enhance productivity, communication, and execution.
Apply Lean Six Sigma problem solving tools to help analyze and mitigate a wide range of issues of varying complexity.
Take on special projects and jump into new challenges as they arise.
Champion Carboline's commitment to safety and quality by adhering to all relevant policies and procedures.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best."Apply for this ad Online! ....Read more...
Type: Permanent Location: Green Bay, Wisconsin
Posted: 2026-10-09 23:12:05
-
JOB DESCRIPTION
Summer 2027 Internship Opportunity!
Title: Lean Manufacturing Intern
Location: Green Bay, Wisconsin
Summary:
Are you ready to kickstart your career with a company that's making a global impact? Carboline is looking for motivated, curious, and driven students to join our team for an unforgettable summer internship experience! This immersive 12-week program (Anticipated: May 17, 2027 - August 6, 2027), offers a unique opportunity to gain valuable experience, build lasting connections, and make a meaningful impact-all before heading back to campus.
Join our dynamic team at the Green Bay Plant as a Lean Manufacturing Intern, where you'll work directly under the guidance of the Plant Manager to drive impactful change across our operations.
This internship offers hands-on experience in lean principles, data-driven problem solving, and process optimization.
You'll be part of a fast-paced environment focused on eliminating waste, improving efficiency, and supporting key improvement initiatives that make a real difference on the production floor.
What You'll Gain:
Meaningful, hands-on experience working on impactful projects that contribute to Carboline's success.
Exposure to cross-functional collaboration and insight into how a global organization operates.
Professional development opportunities, including mentorship from experienced leaders.
A chance to enhance your skills and apply classroom knowledge in a real-world setting.
Participation in team-building activities and a workplace culture that values innovation, integrity, and growth.
Minimum Requirements:
Currently pursuing a degree in Industrial Engineering or a related field.
Preferred: completed of 30 credit hours.
Available to work 30-40 hours per week from May through August.
Strong communication, organization, teamwork, and interpersonal skills.
A proactive attitude and willingness to learn.
Physical Requirements:
Expect light physical activity and extended computer use (up to 8 hours/day).
Occasional visits to the production floor will require proper footwear and PPE.
Must be able to lift/move up to 15 pounds as needed.
Occasionally exposed to moving mechanical parts; noise level is typically moderate.
Students must have housing arrangements in or near Green Bay, WI for the summer, as housing allowance is not provided.
Essential Functions:
Spot inefficiencies and gather data to guide smarter resource allocation.
Join in on daily improvement huddles and contribute fresh ideas.
Support Focused Improvement Team (FIT) events - including Level 3 Kaizen initiatives.
Help with event prep and follow-up, ensuring momentum and results.
Track cost savings from your improvement efforts and celebrate the wins.
Brainstorm and implement performance-boosting ideas that enhance productivity, communication, and execution.
Apply Lean Six Sigma problem solving tools to help analyze and mitigate a wide range of issues of varying complexity.
Take on special projects and jump into new challenges as they arise.
Champion Carboline's commitment to safety and quality by adhering to all relevant policies and procedures.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best."Apply for this ad Online! ....Read more...
Type: Permanent Location: Green Bay, Wisconsin
Posted: 2026-10-09 15:12:21
-
JOB DESCRIPTION
The Global Director of Research & Development, Cleaners is responsible for leading Rust-Oleum's global cleaners technology platform and innovation pipeline.
This role provides strategic and technical leadership for the development, commercialization, quality improvement, and lifecycle management of cleaner, detergent, disinfectant, degreaser, and specialty surface care products across consumer and professional markets.
The successful candidate will establish and execute a global technology strategy, build world-class technical capabilities, and lead a high-performing team of scientists and engineers to deliver differentiated products that drive profitable growth.
The role requires close collaboration with Marketing, Manufacturing, Supply Chain, Regulatory, Quality, Sourcing, and Commercial teams across North America, EMEA, and other global regions.
The location for this role is based in Pleasant Prairie, WI a perfect and affordable location with close proximity two major US cities and international airports.
Key Responsibilities
Strategic Technology Leadership
Develop and execute the global cleaners technology roadmap aligned with business growth objectives.
Identify emerging technologies, consumer trends, regulatory developments, and competitive advancements to drive innovation.
Build and expand Rust-Oleum's cleaners capabilities across consumer, industrial, institutional, and specialty cleaning segments.
Lead technology scouting activities with suppliers, universities, startups, and industry partners.
Product Innovation & Commercialization
Lead the ideation, development, validation, scale-up, and launch of new cleaning technologies and products.
Manage a balanced portfolio of breakthrough innovations, line extensions, reformulations, cost reductions, and quality improvement initiatives.
Ensure strong technical substantiation supporting product claims, performance, safety, compliance, and customer value propositions.
Drive rapid commercialization and efficient project execution from concept through launch.
Knowledge, execution and strategy of internal and external manufacturing capabilities
Global R&D Team Leadership
Build, lead, mentor, and develop a high-performing global technical organization.
Recruit and retain top technical talent in formulation science, analytical chemistry, microbiology, surface science, and testing.
Establish career development, succession planning, and organizational capability-building initiatives.
Foster a culture of innovation, collaboration, accountability, inclusion, and continuous learning.
Technical Excellence
Provide deep scientific leadership in:
Household and industrial cleaning chemistry
Surfactants and detergents
Disinfection and antimicrobial technologies
Surface chemistry and compatibility
Formulation science
Performance testing and claim substantiation
Regulatory and stewardship requirements
Establish standardized testing methodologies and global performance validation protocols.
Drive knowledge sharing and technology transfer across regions and business units.
Cross-Functional Leadership
Partner closely with Marketing, Manufacturing, Operations, Supply Chain, Purchasing, Regulatory Affairs, and Quality teams.
Support manufacturing scale-up, troubleshooting, productivity improvements, and operational excellence initiatives.
Lead technical interactions with strategic customers, suppliers, and external partners.
Serve as the technical voice of the cleaners platform within the broader Rust-Oleum and RPM organizations.
Business Impact
Deliver innovation-driven sales growth and market expansion.
Support margin improvement through formulation optimization and cost-reduction initiatives.
Establish and monitor key innovation and R&D performance metrics.
Manage R&D budgets, capital investments, and resource allocation to maximize business impact.
Qualifications
Education
Ph.D.
preferred; M.S.
required in Chemistry, Chemical Engineering, Polymer Science, Materials Science, Surfactant Science, or related discipline.
Experience
15+ years of progressive R&D leadership experience in consumer cleaners organizations.
Proven success leading global product development organizations.
Demonstrated experience commercializing cleaning, detergent, home care, institutional, industrial, or adjacent specialty chemical products.
Experience managing geographically dispersed teams and global innovation portfolios.
Strong track record of translating technology into profitable business growth.
Technical Competencies
Expertise in cleaning formulations, surfactant systems, detergency mechanisms, and performance testing.
Strong understanding of formulation science, structure-property relationships, and product performance optimization.
Experience with regulatory requirements, product stewardship, and claim substantiation.
Familiarity with digital R&D tools, data analytics, AI-enabled formulation development, and innovation processes.
Leadership Competencies
Strategic thinker with strong business acumen.
Proven ability to lead organizational transformation and capability building.
Exceptional communication and influencing skills.
Strong project portfolio management capability.
Demonstrated success in developing people and building high-performing teams.
Results-oriented leader with a strong bias for action and execution.
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers (9.5) paid holidays and two floating holidays per year.
You are also eligible to earn three weeks of vacation on an annualized basis.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin
Posted: 2026-10-09 15:12:06
-
A Technical Sales Engineer is sought to join an innovative electronics manufacturing team in Hemel Hempstead, Hertfordshire, contributing to the growth of PCBA and full-turnkey electronic manufacturing services (EMS).
The Technical Sales Engineer, Hemel Hempstead, Hertfordshire, will be responsible for developing new business opportunities, building customer relationships and providing technical guidance throughout the sales process.
Responsibilities include:
Identify and secure new business opportunities with OEMs and electronics design houses requiring PCBA and EMS services
Consult with customer engineering teams to understand project requirements, schematics, BOMs and Gerber files
Deliver technical presentations showcasing SMT, THT, selective and robotic soldering, and automated optical inspection capabilities
Carry out Design for Manufacturability (DFM) and Design for Testing (DFT) reviews alongside internal NPI engineers
Advise customers on alternative components, material cost optimisation and supply chain challenges
Prepare accurate cost estimates, RFQ responses and technical proposals, negotiating contracts and volume pricing
Act as the key technical link between customers and internal engineering, production and quality teams while supporting sales territory expansion
The Technical Sales Engineer, Hemel Hempstead, Hertfordshire, will have the following key skills:
Degree in Electronics Engineering, Electrical Engineering or equivalent relevant technical experience
Experience in technical sales, application engineering or account management within PCBA or EMS
Strong understanding of Gerber files, electronic schematics, BOMs and IPC quality standards, including IPC-A-610
Proven B2B sales success, with experience managing complex sales cycles, negotiating contracts and achieving revenue targets
Excellent technical communication and relationship-building skills, with flexibility to travel up to 20-30% of the time
APPLY NOW - Technical Sales Engineer job in Hemel Hempstead, Hertfordshire could be of interest, send your CV to adighton@redlinegroup.Com or call Adam Dighton on 01582 878821 ....Read more...
Type: Permanent Location: Hemel Hempstead, England
Start: ASAP
Salary / Rate: £50000 - £60000 per annum
Posted: 2026-10-09 14:18:20
-
Vehicle Damage Assessor / VDA Vacancy:
- Up to £55,000 per annum
- Great Company Benefits
- Permanent Role
We have a fantastic opportunity for an experienced Estimator / Vehicle Damage Assessor to join an established Accident Repair Centre in the Morden area.
Key role and responsibilities as an Estimator / Vehicle Damage Assessor:
- Accurately and professionally assess a wide range of vehicles
- Use computerised estimating systems
- Calculate costings and the time required to complete all necessary repairs
- Liaise regularly with insurance engineers
- Contact customers to provide updates
Minimum requirements as an Estimator / Vehicle Damage Assessor:
- Must have experience using estimating software (ideally Audatex)
- ATA is advantageous but not essential
- Ensure customer expectations are met and demonstrate great service skills
If you want to hear more about the Estimator / Vehicle Damage Assessor role, please send us your CV by clicking apply now or by contacting Piam on piam@holtautomotive.co.uk / 01202 552915 to discuss further. ....Read more...
Type: Permanent Location: Morden,England
Start: 08/10/2026
Salary / Rate: £55000 per annum
Posted: 2026-10-08 16:40:08
-
A leading structural steel specialist is currently looking for a permanent, full-time Senior Project Manager in London, reporting to the UK Construction Director.
The role oversees structural steel installation projects from planning through to completion, managing timelines, budgets, safety, subcontractors, contractual obligations and client communications, with the opportunity to progress into more advanced positions within the company.Start Date: February 2027 Salary: £85,000 per annum Contract: Permanent, full-time Location: LondonDuties:
Plan and coordinate the project team to oversee all aspects of structural steel installation projects
Manage and deliver project timelines, ensuring key milestones and deadlines are met on programme
Lead with clearly communicated lookahead plans, cascaded to both the project team and site team
Visual planning through model and 2D drawing mark-ups
Organise trades well in advance of mobilising
Coordinate with clients, engineers, designers and site personnel to ensure clear communication and project alignment
Lead and coordinate project documentation, including contracts, schedules, work packages, RFIs and change orders
Lead the project team through constructability and method statements to align internal stakeholders
Monitor project costs, budgets and financial forecasts
Lead site meetings and report on progress to stakeholders, both internally and to the client
Ensure all internal and external project reporting is completed as per project requirements
Ensure health, safety and environmental compliance across all sites through the project team
Oversee quality control, ensuring work is completed to specifications and standards, including project handover
Manage subcontractors and suppliers to meet deadlines and quality expectations
Resolve site issues and technical challenges promptly, working through problems with the client and project team via Teams calls and direct contact
Support the commercial team on scope items
Act as the link between the project and the workshop team
Maintain detailed daily and weekly records and project documentation
Be the project lead with a continuous and reliable presence on site
Review and manage ITPs
Ensure O&M manuals and associated handovers are delivered on time
Requirements:
Previous London project experience (Essential)
Proven experience (5+ years) as a Project Manager in structural steel, steel erection or heavy construction
Ability to manage multiple projects simultaneously
Strong record of delivering projects to a high standard
In-depth knowledge of steel construction methods, materials and site operations
Strong understanding of structural drawings, shop drawings and erection plans
Experience with project planning tools such as Asta Project or Primavera P6
Competent in contract administration and financial control, coordinating with the QS
Proficient with Microsoft Office (Word, Excel, Outlook, PowerPoint)
Proficient with Trimble and Trimble Connect
Proficient with PDF mark-up (Bluebeam) to cascade requirements or constructability
Excellent leadership, communication and organisational skills
Valid driver's licence and willingness to travel to project sites
CSCS/SMSTS certification
Reliable and dependable
Degree or diploma in Civil Engineering, Construction Management or a related field (Desirable)
NEBOSH or IOSH Health & Safety certification (Desirable)
Familiarity with BIM and steel detailing software such as Tekla Structures (Desirable)
Experience with crane lifts and heavy steel logistics planning (Desirable)
Key Competencies:
Planning and control
Managing the customer relationship
Communication and influencing
Team working and personal impact
Attention to detail
Strong interpersonal skills and relationship management
Accountability for the project
Management of all trades leading into the project
Punctuality
Holding the project team to high standards
If you are interested, please send your CV for consideration. ....Read more...
Type: Permanent Location: London, England
Start: February 2027
Salary / Rate: Up to £85000.00 per annum
Posted: 2026-10-08 16:05:10
-
JOB DESCRIPTION
The Process Engineer I provides engineering support to manufacturing operations by identifying opportunities for process improvements, assisting with production troubleshooting, and supporting continuous improvement initiatives.
This position works closely with production, quality, maintenance, and safety teams to improve efficiency, product quality, and operational performance while developing foundational process engineering skills.
ESSENTIAL FUNCTIONS:
Process Support & Optimization
Assist in monitoring manufacturing processes to ensure consistent product quality and operational efficiency.
Support investigations into process-related issues and participate in root cause analysis activities.
Collect, analyze, and report production data to identify trends and improvement opportunities.
Assist with implementing process changes under the guidance of senior engineers.Continuous Improvement
Participate in Lean Manufacturing, Six Sigma, and continuous improvement projects.
Support waste reduction and productivity improvement initiatives.
Identify opportunities for cost savings and process standardization.Documentation & Compliance
Maintain process documentation, work instructions, and standard operating procedures (SOPs).
Ensure engineering changes are documented and communicated appropriately.
Support compliance with safety, environmental, and quality standards.Cross-Functional Collaboration
Work with production personnel to resolve day-to-day operational issues.
Assist quality and maintenance teams with investigations and corrective actions.
Participate in project meetings and process reviews.Other Duties
Support capital improvement and equipment installation projects as assigned.RECOMMENDED:
Degree, technical certificate, or related engineering education preferred.
Minimum 1-2 years related manufacturing/process engineering experience.
Strong analytical, communication, problem-solving, and Microsoft Office skills required.
TRAVEL REQUIREMENTS: Occasional travel for training, project support, supplier visits, or professional development may be required.
WORK ENVIRONMENT: Work is performed in office and manufacturing settings and requires regular interaction with production processes, equipment, and cross-functional teams.Apply for this ad Online! ....Read more...
Type: Permanent Location: Ellaville, Georgia
Posted: 2026-10-08 15:14:15
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Mechanical Engineer provides engineering support to the assigned program and/or area to ensure the product is processed in accordance with customer and division quality requirements while maintaining production flow.
Charged with developing and maintaining systems to ensure that all products manufactured by the plant meet customer specifications and achieve superior and reliability levels.
Responsible for investigating and implementing new process technology at the plant.
The Mechanical Engineer is responsible for maintaining, upgrading, and optimizing the plant.
This position is responsible for influencing the development of preventative maintenance programs at the facility and will have a significant role in capital improvement plans while assisting in work area design, plant layout, visual control and metric implementation, material flow, process tracking, and communication.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Analyze statistical data and product specifications to determine standards and establish quality and reliability objectives of the finished product.
Participate in plant metric reporting.
Coordinate quality control objectives and activities as detailed in the facility site plan to resolve any production problems that may occur, maximize product consistency, and minimize cost.
Prepare estimates of production costs and production progress reports for management.
Design measurement and control systems for chemical plants based on data collected in laboratory experiments and in pilot plant operations.
Use SAP to monitor production/business functions.
Provides engineering expertise for all operations in the plant.
Must be the subject matter expert regarding all manufacturing equipment and processes at the plant.
Recommend modifications to current processes and equipment; document and follow up with process engineers responsible for the modifications.
Works with the plant engineers and maintenance to influence the direction of preventative maintenance best practices.
Support a high-performance results-oriented culture and maintain high standards of safety and compliance.
Provide technical and operational leadership for equipment and facility maintenance and improvements.
Deliver disciplined project management and product development assistance.
Regular review of batch first pass yield, production quality, distressed, obsolete, scrap, and returned material.
Troubleshoot and implement repeatability best practices.
Assist in the identification of capital requirements for the facilities' annual capital plans and budgets.
Lead investigations into equipment failures, difficulties, and deficiencies.
Interface with leadership, operators, and maintenance to ensure continuous improvement and continuous production.
Develop and streamline their critical metrics and assist when necessary.
Assist in the development of site metrics and KPI's Implementation and continued support of PIE.
Perform a job in accordance with all Tremco safety policies and procedures.
Perform other duties, as assigned.
EDUCATION REQUIREMENTS:
Bachelor's degree (B.
S.) in mechanical or electrical engineering.
EDUCATION REQUIREMENTS:
6+ Years' experience performing Engineering duties/responsibilities in a Manufacturing Environment preferred.
Continuous web process and batch process equipment experience preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Create standard work instructions/SOPs.
Demonstrate knowledge of arithmetic, statistics, continuous improvement concepts, ISO procedures, and their applications.
Apply Excel, Word, and SAP applications to daily job responsibilities.
Become knowledgeable of safety, environmental, ISO, and workplace regulations in the plant.
Manage multiple priorities and make decisions on the most critical to keep the project moving forward.
Communicate technical concepts proficiently both verbally and in written form related to product usage, competitive product analysis, product specifications, product repairs, and problems, etc.
Possess strong problem-solving skills and employ a solutions-oriented approach.
Bring a self-motivated and team player mindset.
Exhibit strong organizational skills.
Work in a manufacturing environment.
Exemplify team leadership skills.
Build relationships with all levels of the plant.
BENEFITS:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2026-10-08 15:11:35
-
Job Title - Maintenance Planner Location - Peterborough Salary - £43,000 Shift - Monday - Friday (Days) 33 days holiday
15% pension
Do you thrive in a fast-moving environment? Enjoy working on high speed production equipment? We are recruiting for a Maintenance Planner to join a global FMCG company based near Peterborough The right Maintenance Planner will be looking to join an innovative FMCG site, who value teamwork, integrity and honesty. The Maintenance Planner will:
Ensure that business health, safety and environmental procedures and policies are followed. , Develop and administer an effective CMMS System, as part of a business group initiative. , Co-ordinate and oversee the engineering stores operation on site, ensuring the Asset Care Team has the necessary resources to maintain PM compliance and react to failures , Based on data and working with a variety of stakeholders optimise maintenance programmes for cost and time-utilisation , Track maintenance KPI data through CMMS to continually improve asset uptime, minimise cost and drive skill transfer to operational teams , Directly liaise with key stakeholders around the site regarding upcoming maintenance activities. , Work with Asset Care team to ensure the company is meeting its legal obligations in line with equipment maintenance and compliance, while maintaining service records. , Track and monitor costs and variances using on site accounting and maintenance software. , Participate in meetings with operations and maintenance teams to review daily/ weekly work issues and backlogs.
The successful Maintenance Planner will ideally have experience in the below:
- Maintenance planning - Managing contractors - Data Analysis - Shutdown planning - CMMS - System used is Piranha Company Profile: Being one of the leaders in their industry, employees of this company are given stability and opportunity.
The company are committed to continually improving their products, sustainability and growth which helps partnering businesses grow.
Benefits of being a Maintenance Planner:
Salary - £43,000 Shift - Monday - Friday (Days) 33 days holiday
15% pension
If this sounds like the role for you and you would like to apply for the maintenance planner position please contact or alternatively call 01923 227 543 ....Read more...
Type: Permanent Location: Peterborough, England
Start: ASAP
Salary / Rate: £42000 - £44000 per annum + 15% Pension,Holidays, Healthcare
Posted: 2026-10-08 10:27:16
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Junior Mechanical Engineer provides engineering support to the program and/or area to ensure the product is processed in accordance with customer and division quality requirements while maintaining production flow.
Charged with assisting with the development and maintenance of systems to ensure that all products manufactured by the plant meet customer specifications and achieve superior reliability levels.
Responsible for investigating and implementing new process technology at the plant.
The Junior Mechanical Engineer is responsible for maintaining, upgrading, and optimizing the plant.
This position is responsible for influencing the development of preventative maintenance programs at the facility, assisting in work area design, plant layout, visual control, metric implementation, material flow, process tracking, and communication.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Analyze statistical data and product specifications to determine standards and establish quality and reliability objectives of the finished product.
Participate in plant metric reporting.
Coordinate quality control objectives and activities as detailed in the facility site plan to resolve any production problems that may occur, maximize product consistency, and minimize cost.
Design measurement and control systems for chemical plants based on data collected in laboratory experiments and in pilot plant operations.
Use SAP to monitor production/business functions.
Provides engineering support for all operations in the plant.
Recommend modifications to current processes and equipment; document and follow up with engineers responsible for the modifications.
Works with the plant engineers, maintenance, and facilities to influence the direction of preventative maintenance best practices.
Support a high-performance results-oriented culture and maintain high standards of safety and compliance.
Provide technical and operational leadership for equipment and facility maintenance and improvements.
Deliver disciplined project management and product development assistance.
Regular review of batch first pass yield, production quality, distressed, obsolete, scrap, and returned material.
Troubleshoot and implement repeatability best practices.
Support investigations on equipment failures, difficulties, and deficiencies.
Interface with leadership, operators, and maintenance to ensure continuous improvement and continuous production.
Assist in the Collection of site metrics and KPI's Implementation and continued support of PIE.
Perform a job in accordance with all Tremco safety policies and procedures.
Perform other duties, as assigned.
EDUCATION & EXPERIENCE REQUIREMENT:
Bachelor's degree (B.
S.) in mechanical or electrical engineering preferred.
Previous experience in a manufacturing environment preferred.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
Compensation will be commensurate with the applicant's relevant experience.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2026-10-08 07:10:34
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Junior Mechanical Engineer provides engineering support to the program and/or area to ensure the product is processed in accordance with customer and division quality requirements while maintaining production flow.
Charged with assisting with the development and maintenance of systems to ensure that all products manufactured by the plant meet customer specifications and achieve superior reliability levels.
Responsible for investigating and implementing new process technology at the plant.
The Junior Mechanical Engineer is responsible for maintaining, upgrading, and optimizing the plant.
This position is responsible for influencing the development of preventative maintenance programs at the facility, assisting in work area design, plant layout, visual control, metric implementation, material flow, process tracking, and communication.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Analyze statistical data and product specifications to determine standards and establish quality and reliability objectives of the finished product.
Participate in plant metric reporting.
Coordinate quality control objectives and activities as detailed in the facility site plan to resolve any production problems that may occur, maximize product consistency, and minimize cost.
Design measurement and control systems for chemical plants based on data collected in laboratory experiments and in pilot plant operations.
Use SAP to monitor production/business functions.
Provides engineering support for all operations in the plant.
Recommend modifications to current processes and equipment; document and follow up with engineers responsible for the modifications.
Works with the plant engineers, maintenance, and facilities to influence the direction of preventative maintenance best practices.
Support a high-performance results-oriented culture and maintain high standards of safety and compliance.
Provide technical and operational leadership for equipment and facility maintenance and improvements.
Deliver disciplined project management and product development assistance.
Regular review of batch first pass yield, production quality, distressed, obsolete, scrap, and returned material.
Troubleshoot and implement repeatability best practices.
Support investigations on equipment failures, difficulties, and deficiencies.
Interface with leadership, operators, and maintenance to ensure continuous improvement and continuous production.
Assist in the Collection of site metrics and KPI's Implementation and continued support of PIE.
Perform a job in accordance with all Tremco safety policies and procedures.
Perform other duties, as assigned.
EDUCATION & EXPERIENCE REQUIREMENT:
Bachelor's degree (B.
S.) in mechanical or electrical engineering preferred.
Previous experience in a manufacturing environment preferred.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
Compensation will be commensurate with the applicant's relevant experience.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2026-10-07 23:12:09
-
JOB DESCRIPTION
We are pursuing a Manufacturing Technology Manager who is a professional problem solver, an equipment translator and a champion of technology that will shape how we manufacture today and tomorrow!
Do inefficient processes bother you just a little too much? Do you look at manufacturing methods and think "there's got to be a better way?" Do machines, technology and tough problems sound enjoyable? If automation, manufacturing technology, process improvement, and solving problems that make everyone else scratch their heads sound like your kind of fun, apply now at our Legend Brands careers page below.
Please apply directly on our careers page - Legend Brands Careers Page
Employer Description:
Legend Brands is a growing multi-vertical manufacturer serving restoration, cleaning, and construction professionals; performance automotive cooling markets; fish hatchery and aquaculture operations; through a portfolio of industry-leading brands including Dri-Eaz, Mediclean, UnSmoke, OdorX, Sapphire Scientific, Prochem, Chemspec, Flex-A-Lite, and Marisource.
Essential Duties:
Lead manufacturing launch of new and revised products including tooling, equipment, methods and shop floor support
With the team and through personal contributions, troubleshoot manufacturing assembly and assembly problems, identify root causes and implement corrective actions that prevent recurrence
Lead and execute engineering projects through direct contribution and through team members
Design and implement the layout of equipment and workstations to ensure maximum efficiency and product flow
Select, develop, coach and evaluate department personnel, establishing clear expectations and hold accountable for results
Lead plastics process engineering activities, including process development, tooling qualification, validation, and optimization, to ensure safe, consistent, and cost-effective production of plastic components
Provide hands-on technical leadership to Plastics Process Engineers in troubleshooting molding issues, establishing process parameters and standards, and implementing improvements that reduce scrap, improve quality, and increase throughput
Maintain and prioritize project backlog with defined owners, milestones, and completion dates.
Actively involved in Tier Meetings, working with a cross-functional team to resolve technical manufacturing issues
Communicate project status, resource constraints, risks, and decisions requiring escalation
Develop team capabilities and enhance cross-training to reduce dependence on individual technical experts
Performs other related duties as assigned
Qualifications:
Bachelor's Degree in Manufacturing Engineering/Technology, Mechanical, Industrial Engineering or directly related field required
Minimum seven years' proven leadership experience in a technical environment required
Ability to evaluate capacity, cycle time, manufacturing costs, and capital project justification
Experience with plastics injection molding and roto molding preferred
Strong communication skills with all levels of staff
Knowledge of Six Sigma/Lean practices
Skilled in budget preparation
Ability to communicate technical items to non-technical personnel
Ability to effectively communicate to all levels within the organization
Ability to pass a pre-employment background check.
Hiring Range:
Between $120,000 - $138,000/year
Benefits:
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, 10 paid holidays, paid time off, employer matching 401(k) PLUS a company-sponsored pension, and more!
Additional Considerations:
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability
Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's All job offers are contingent upon satisfactory pre-employment drug test and background screeningApply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2026-10-07 15:12:58
-
JOB DESCRIPTION
We are pursuing a Manufacturing Technology Manager who is a professional problem solver, an equipment translator and a champion of technology that will shape how we manufacture today and tomorrow!
Do inefficient processes bother you just a little too much? Do you look at manufacturing methods and think "there's got to be a better way?" Do machines, technology and tough problems sound enjoyable? If automation, manufacturing technology, process improvement, and solving problems that make everyone else scratch their heads sound like your kind of fun, apply now at our Legend Brands careers page below.
Please apply directly on our careers page - Legend Brands Careers Page
Employer Description:
Legend Brands is a growing multi-vertical manufacturer serving restoration, cleaning, and construction professionals; performance automotive cooling markets; fish hatchery and aquaculture operations; through a portfolio of industry-leading brands including Dri-Eaz, Mediclean, UnSmoke, OdorX, Sapphire Scientific, Prochem, Chemspec, Flex-A-Lite, and Marisource.
Essential Duties:
Lead manufacturing launch of new and revised products including tooling, equipment, methods and shop floor support
With the team and through personal contributions, troubleshoot manufacturing assembly and assembly problems, identify root causes and implement corrective actions that prevent recurrence
Lead and execute engineering projects through direct contribution and through team members
Design and implement the layout of equipment and workstations to ensure maximum efficiency and product flow
Select, develop, coach and evaluate department personnel, establishing clear expectations and hold accountable for results
Lead plastics process engineering activities, including process development, tooling qualification, validation, and optimization, to ensure safe, consistent, and cost-effective production of plastic components
Provide hands-on technical leadership to Plastics Process Engineers in troubleshooting molding issues, establishing process parameters and standards, and implementing improvements that reduce scrap, improve quality, and increase throughput
Maintain and prioritize project backlog with defined owners, milestones, and completion dates.
Actively involved in Tier Meetings, working with a cross-functional team to resolve technical manufacturing issues
Communicate project status, resource constraints, risks, and decisions requiring escalation
Develop team capabilities and enhance cross-training to reduce dependence on individual technical experts
Performs other related duties as assigned
Qualifications:
Bachelor's Degree in Manufacturing Engineering/Technology, Mechanical, Industrial Engineering or directly related field required
Minimum seven years' proven leadership experience in a technical environment required
Ability to evaluate capacity, cycle time, manufacturing costs, and capital project justification
Experience with plastics injection molding and roto molding preferred
Strong communication skills with all levels of staff
Knowledge of Six Sigma/Lean practices
Skilled in budget preparation
Ability to communicate technical items to non-technical personnel
Ability to effectively communicate to all levels within the organization
Ability to pass a pre-employment background check.
Hiring Range:
Between $120,000 - $138,000/year
Benefits:
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, 10 paid holidays, paid time off, employer matching 401(k) PLUS a company-sponsored pension, and more!
Additional Considerations:
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability
Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's All job offers are contingent upon satisfactory pre-employment drug test and background screeningApply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2026-10-07 15:12:57
-
JOB DESCRIPTION
We are pursuing a Manufacturing Technology Manager who is a professional problem solver, an equipment translator and a champion of technology that will shape how we manufacture today and tomorrow!
Do inefficient processes bother you just a little too much? Do you look at manufacturing methods and think "there's got to be a better way?" Do machines, technology and tough problems sound enjoyable? If automation, manufacturing technology, process improvement, and solving problems that make everyone else scratch their heads sound like your kind of fun, apply now at our Legend Brands careers page below.
Please apply directly on our careers page - Legend Brands Careers Page
Employer Description:
Legend Brands is a growing multi-vertical manufacturer serving restoration, cleaning, and construction professionals; performance automotive cooling markets; fish hatchery and aquaculture operations; through a portfolio of industry-leading brands including Dri-Eaz, Mediclean, UnSmoke, OdorX, Sapphire Scientific, Prochem, Chemspec, Flex-A-Lite, and Marisource.
Essential Duties:
Lead manufacturing launch of new and revised products including tooling, equipment, methods and shop floor support
With the team and through personal contributions, troubleshoot manufacturing assembly and assembly problems, identify root causes and implement corrective actions that prevent recurrence
Lead and execute engineering projects through direct contribution and through team members
Design and implement the layout of equipment and workstations to ensure maximum efficiency and product flow
Select, develop, coach and evaluate department personnel, establishing clear expectations and hold accountable for results
Lead plastics process engineering activities, including process development, tooling qualification, validation, and optimization, to ensure safe, consistent, and cost-effective production of plastic components
Provide hands-on technical leadership to Plastics Process Engineers in troubleshooting molding issues, establishing process parameters and standards, and implementing improvements that reduce scrap, improve quality, and increase throughput
Maintain and prioritize project backlog with defined owners, milestones, and completion dates.
Actively involved in Tier Meetings, working with a cross-functional team to resolve technical manufacturing issues
Communicate project status, resource constraints, risks, and decisions requiring escalation
Develop team capabilities and enhance cross-training to reduce dependence on individual technical experts
Performs other related duties as assigned
Qualifications:
Bachelor's Degree in Manufacturing Engineering/Technology, Mechanical, Industrial Engineering or directly related field required
Minimum seven years' proven leadership experience in a technical environment required
Ability to evaluate capacity, cycle time, manufacturing costs, and capital project justification
Experience with plastics injection molding and roto molding preferred
Strong communication skills with all levels of staff
Knowledge of Six Sigma/Lean practices
Skilled in budget preparation
Ability to communicate technical items to non-technical personnel
Ability to effectively communicate to all levels within the organization
Ability to pass a pre-employment background check.
Hiring Range:
Between $120,000 - $138,000/year
Benefits:
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, 10 paid holidays, paid time off, employer matching 401(k) PLUS a company-sponsored pension, and more!
Additional Considerations:
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability
Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's All job offers are contingent upon satisfactory pre-employment drug test and background screeningApply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2026-10-07 15:12:20
-
We are currently recruiting for a Project Manager to join one of our well-established clients in Stansted.
Our client is a leading UK construction company specialising in RC frames, groundworks, civil engineering and infrastructure projects.
Key Responsibilities:
Lead the planning, execution, and delivery of highways and infrastructure projects.
Manage site teams, subcontractors, suppliers, and key stakeholders.
Ensure projects are delivered safely, on programme, within budget, and to the required quality standards.
Oversee contract administration, commercial performance, and risk management.
Develop and maintain project programmes, reporting regularly on progress and key milestones.
Coordinate with clients, local authorities, utility providers, and design consultants.
Drive compliance with HSE legislation, company procedures, and industry best practices.
Identify opportunities for programme improvements, value engineering, and cost efficiencies.
Support bid and pre-construction activities where required.
Skills & Requirements:
Proven experience as a Project Manager within Highways, Civil Engineering, or Infrastructure projects.
Strong understanding of highways construction, road schemes, junction improvements, S278 works, earthworks, drainage, utilities, and associated civil engineering activities.
Ability to manage multiple stakeholders while maintaining programme and budget control.
Experience working under NEC contracts is highly desirable.
Excellent leadership, communication, and organisational skills.
Proficient in project reporting, planning, and risk management.
Degree or HNC/HND in Civil Engineering, Construction Management, or a related discipline.
SMSTS.
CSCS Card.
First Aid at Work (desirable).
If interested, please get in touch with Gearoid on 07889 806024 or contact the office on 0203 008 5212.
Alternatively, click "Apply" to forward an up-to-date copy of your CV.
Cavendish (Recruitment) Professionals Ltd are proud to be an equal opportunity employer and believe that inclusivity begins with the candidate experience.
All qualified applicants will receive consideration for employment regardless of gender, race, age, sexual orientation, religion, or belief. ....Read more...
Type: Contract Location: Stansted, England
Start: ASAP
Salary / Rate: £400 - £450 per day
Posted: 2026-10-06 16:34:35
-
Vehicle Damage Assessor / VDA Vacancy:
- Up to £49,000 Basic + Bonus
- Company Benefits
- Permanent Role
We have a fantastic opportunity for an experienced Estimator / Vehicle Damage Assessor to join an established Accident Repair Centre in the Colchester area.
Key role and responsibilities as an Estimator / Vehicle Damage Assessor:
- Accurately and professionally assess a wide range of vehicles
- Use computerised estimating systems
- Calculate costings and the time required to complete all necessary repairs
- Liaise regularly with insurance engineers
- Contact customers to provide updates
Minimum requirements as an Estimator / Vehicle Damage Assessor:
- Must have experience using estimating software (ideally Audatex)
- ATA is advantageous but not essential
- Ensure customer expectations are met and demonstrate great service skills
If you want to hear more about the VDA role, please send us your CV by clicking apply now or by contacting Piam on 01202 552915 / piam@holtautomotive.co.uk to discuss further.
Reference PP-346924 ....Read more...
Type: Permanent Location: Colchester,England
Start: 06/10/2026
Salary / Rate: £49000 per annum, Benefits: + Bonus
Posted: 2026-10-06 16:12:03
-
We are recruiting a Production Manager with strong SolidWorks design experience to lead the design and manufacture of specialist fleet vehicle conversions. This is a hands-on role where engineering design is a central responsibility.
Alongside managing workshop production, you will personally create vehicle conversion designs, develop 3D models and 2D manufacturing drawings, and produce accurate bills of materials (BOMs).
You will take ownership of projects from customer requirements and initial concept through to production, installation and completion.
The role would suit a Production Manager, Engineering Manager or Design and Production Manager who combines practical CAD design skills with experience leading manufacturing or workshop teams. The Production Manager role
Personally design and develop vehicle conversion solutions using SolidWorks, including vehicle layouts, mounting brackets, equipment housings and fabricated components.
Create detailed 3D CAD models, assemblies and 2D engineering drawings to support manufacture and installation.
Produce and maintain bills of materials (BOMs), component specifications and build documentation, ensuring accurate information is available for procurement and production.
Translate customer specifications into practical designs that consider available space, installation access, manufacturing processes and cost.
Review and amend designs throughout the build process, resolving fitment issues and incorporating workshop feedback.
Manage drawing revisions, engineering changes and the release of approved designs into production.
Lead day-to-day workshop operations, allocating work and coordinating production schedules, labour and materials.
Support production and installation teams with practical engineering guidance throughout each vehicle build.
Ensure completed conversions meet customer requirements, quality standards, vehicle manufacturer guidelines and applicable safety requirements.
Liaise with customers and suppliers on technical specifications, component selection and project progress.
Improve designs and production methods to reduce build times, material waste and rework.
What we are looking for
Strong hands-on SolidWorks experience, with the ability to independently create 3D models, assemblies and detailed manufacturing drawings.
Experience producing and managing BOMs for manufacture, assembly and procurement.
Production management, workshop management or team leadership experience within vehicle conversion, automotive engineering, fabrication or specialist manufacturing.
A practical understanding of mechanical design, fabrication, assembly and installation processes.
Experience taking engineering projects from concept and design through to manufacture.
The ability to balance hands-on design work with production planning, team leadership and project delivery.
Strong problem-solving skills and a clear focus on quality, safety and manufacturing efficiency.
A relevant engineering qualification or equivalent practical experience.
Experience with vehicles, commercial vehicle conversions, vehicle body building or specialist vehicle equipment would be beneficial.
Knowledge
Salary: £45,000 per annumHours: Monday to Thursday, 7.30am-4.30pm; Friday, 7.30am-2pmHoliday: 28 days ....Read more...
Type: Permanent Location: Manchester, England
Start: ASAP
Salary / Rate: Up to £45000.00 per annum + excellent benefits
Posted: 2026-10-06 11:18:27
