-
Working as part of the Street Works Team, you will be:
Providing support in coordinating all works and events affecting the carriageways and footways on all Roads.
Providing support in ensuring the organisation carries out its Network Management Duty under the Traffic Management Act 2004.
Ensuring the Streetworks register is maintained and represents a true and accurate picture of works on the highway in Lewisham.
Playing a key role in achieving aims of continuous improvement in journey times, journey time reliability and customer satisfaction.
Responsibilities
To validate and check all permit applications and notices submitted to Lewisham's Streetworks Register using Street Manager and Confirm.
To validate and check all geographical information on permit applications.
To check all works against Section 58 and 58A restrictions, where possible resolving conflicts.
To check all works against road designations, special events database and engineering difficulties.
To check all works against parking restrictions and ensure applicant follows appropriate process for any suspensions necessary.
Enter permit applications and notices not submitted by third parties direct to Street Manager.
To proactively assess incoming notice/permit applications and where necessary disseminate information to team members for further investigation/action.
Ensure information on all granted permits is correct before sending.
Ensure information on all permit refusals is correct before sending.
To validate and check all start works and works clear or closed notices.
To validate and check reinstatement information, ensuring data is consistent with permit.
To issue Fixed Penalty Notices, recording and collating information to endure fine is correct.
To issue S50 licences and manage associated administration and deposit refunds.
Manage the administration process to create, where required, collate, check and distribute the performance indicators required for The London Permit Scheme.
Liaise with senior officers throughout the organisation.
Maintain good communications with the public, officers of other authorities, government agencies, police, utility companies, London Buses, consultants and contractors.
Attend meetings taking minutes as appropriate.
Resolve issues raised concerning the Streetworks and Permitting part of the Confirm System, raising help desk calls with the supplier or the Lewisham I.T.
help desk as required.
Maintain appropriate knowledge of current standards and legislation relative to the work of the service.
Assist in ensuring compliance with statutory and legal requirements.
To record and file accurately correspondence and technical documents.
To provide support on specific policy, corporate and service plan areas as assigned,
To carry out other general administration work as may be required.
To undertake any other duties as required within the scope of the post.
Required
A good knowledge of computer systems, ideally of a Streetworks system such as Confirm and the Street Manager System.
Detailed knowledge of the London Permit Scheme.
Detailed knowledge of the current Health and Safety code and Chapter 8 of The Traffic Signs Manual.
Good communication skills.
Analytical and problem solving skills.
Experience of dealing effectively with utility companies and highway maintenance contractors.
Experience of the street works system Street Manager and ideally Confirm.
If interested, please submit CV and call Varsha on 02036913890 between 9am to 5pm (Mon to Fri) ....Read more...
Type: Contract Location: Lewisham, England
Salary / Rate: £18 - £19 per hour
Posted: 2025-09-18 16:27:05
-
Technical Lead - Azure/O365 - Cheltenham x5 days per week on-site£45,000 - £60,000 salaryA leading Cheltenham client seeks a hands-on Technical Lead to drive complex infrastructure projects, cloud migrations, and maintain technical standards.
The role serves as the L3 escalation point and engineering team role model, with potential to advance to Technical Director and senior leadership.Key skills and responsibilities,, Led Microsoft 365, SharePoint, and Azure/cloud migration projects from scoping to rollout., Delivered technical solutions and infrastructure migrations, ensuring quality and acting as escalation point., Developed and maintained cybersecurity strategies aligned with industry standards., Built secure user devices and managed device integrity and anti-malware., Implemented proactive monitoring and automation tools for predictive operations., Drove service management improvements including ticketing and root cause analysis., Ensured robust backup strategies and data integrity across on-premises and cloud., Expert in infrastructure, endpoint security, network services, RMM, and ITIL-based service delivery., All backup strategies, whether on-premises or cloud-based, should be assessed for suitability, with monitoring and management processes implemented to maintain data integrity and support business continuity, Develop and implement a cybersecurity strategy for all customers, ensuring compliance with industry standards and best practices., Design and build secure user devices, including PC/laptop setups, anti-malware measures, mirroring, and device integrity.
Interested? Please submit your updated CV to Olivia Yafai at Crimson for immediate consideration.
Not interested? Do you know someone who might be a perfect fit for this role? Refer a friend and earn £250 worth of vouchers!
Crimson is acting as an employment agency regarding this vacancy ....Read more...
Type: Permanent Location: Cheltenham, England
Start: ASAP
Salary / Rate: £50000 - £60000 per annum
Posted: 2025-09-18 15:23:34
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
During each term as our R&D Intern/Co-Op they will have the opportunity to perform real-world takes like product testing, data analysis, and prototyping under the guidance of experienced engineers and mentors.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Lead small projects Collect and analyze data Conduct and participate in meetings to communicate information or collaborate on projects Assist with new product development, improving existing products, troubleshooting problems, and managing testing schedules. Learn new technical skills, gain experience with design processes, and contribute to innovation.
EDUCATION REQUIREMENT:
High school graduate or equivalent required. Must be a sophomore, junior or senior in good academic standing, pursuing a bachelor's degree in chemical, electrical or mechanical engineering at an accredited college or university.
EXPERIENCE REQUIREMENT:
Experience with engineering projects focused on improvement and innovation is encouraged but not required
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Understanding process variance and the resultant effects Knowledge of applied statistics Ability to perform problem analysis utilizing problem solving methodology
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The hourly rate for applicants in this position starts at $20 per hour and increases based on college progression and repeat internship or co-op opportunities.
This rate is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2025-09-18 15:11:09
-
JOB DESCRIPTION
Summary:
Carboline is seeking a strategic and collaborative Project Development Manager in the Central Region (Chicago, St.
Louis, Minneapolis, Kansas City, Detroit, Indianapolis, etc.) with a proactive approach to drive major project growth through early engagement with engineers, architects, EPCs, and other key influencers.
This role leads cross-functional teams to ensure Carboline is specified early in the design cycle and delivers winning outcomes.
Ideal candidates bring strong leadership, influencing skills, excellent communication, and analytical expertise-especially in pipeline management.
Minimum Requirements:
Bachelor's degree or technical discipline or equivalent experience.
Minimum 5 years of sales experience with a proven track record in project selling and specification influence.
Strong leadership and coordination skills across cross-functional teams.
Excellent communication, presentation, and facilitation abilities.
Analytical mindset with pipeline management expertise (Salesforce experience preferred).
Valid driver's license.
Physical Requirements:
Minimal physical activity; occasional lifting up to 50 lbs.
Extended computer usage (up to 8 hours/day).
Occasional exposure to chemicals.
Travel by car or air up to 50%, including overnight stays.
Essential Functions:
Identify and engage major projects early in the design cycle to influence specifications and construction documents.
Build and manage a robust pipeline of strategic projects within your territory/market.
Develop and execute project pursuit strategies that position Carboline for success.
Cultivate relationships with engineers, architects, EPCs, consultants, and owners.
Lead internal coordination across Sales, Business Development, Marketing, and Project Development teams.
Champion high-value projects internally, mobilizing resources and driving alignment.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best."Apply for this ad Online! ....Read more...
Type: Permanent Location: St. Louis, Missouri
Posted: 2025-09-18 15:10:26
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB: The Building Sciences team will participate in different projects with various scopes of work.
The Field Engineer is responsible for the organization, research, and documentation of cross-departmental assignments supporting the continued growth and operations of Pure Air Control Services, a Weatherproofing Technologies, Inc.
division.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Supports the Building Sciences Project Manager with test and balance research, consultation, operations policy generation, and quality issues.
Adjust systems controls to settings recommended by the vendor, conduct measurement tests, and discuss system malfunctions with system users to isolate the problems.
Read and interpret blueprints, technical drawings, schematics, and computer-generated reports.
Coordinate with multi-disciplined teams, including sales personnel and field team, to develop a scope of work and estimate the cost of a project.
Organize material and complete reports according to pre-defined standards regarding order, clarity, conciseness, style, and terminology.
Evaluate current processes and develop innovative approaches for improvement. Write and develop in-house training materials supporting the staff and franchise partners.
Contacts and communicates directly with all levels of company management, staff members, and clients.
OTHER SKILLS AND ABILITIES:
Bachelor's Degree in an Engineering field (preferred) Industry certificates are preferred but not required. Ability to obtain Engineer Intern certification preferred but not required. Working knowledge of Heating, Ventilation, and Air Conditioning systems. Familiarity with current building, energy, and mechanical codes and standards.
Understanding of Indoor Air Quality and how it affects the building occupants.
Understanding of HVAC design principles, including heating load, air change, and ventilation requirements, and applying different HVAC systems (Constant volume, VAV, 100% OA, ERV units, etc.). Understanding of HVAC engineering fundamentals, including load calculations, conceptual systems analysis through construction documentation design, equipment design and layout, and duct and pipe sizing.
Customer service oriented. Proficient computer skills and strong technical writing skills.
Proficient in Microsoft Office Suite (Word, Excel, and Outlook). Well organized and possess superior time management abilities to support several projects simultaneously. Self-motivated and self-directed while remaining a team player.
Ability to travel out of state up to 50% of the time.
The salary range for applicants in this position generally ranges between $58,000 and $75,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Clearwater, Florida
Posted: 2025-09-18 15:10:24
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB: The Building Sciences team will participate in different projects with various scopes of work.
The Field Engineer is responsible for the organization, research, and documentation of cross-departmental assignments supporting the continued growth and operations of Pure Air Control Services, a Weatherproofing Technologies, Inc.
division.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Supports the Building Sciences Project Manager with test and balance research, consultation, operations policy generation, and quality issues.
Adjust systems controls to settings recommended by the vendor, conduct measurement tests, and discuss system malfunctions with system users to isolate the problems.
Read and interpret blueprints, technical drawings, schematics, and computer-generated reports.
Coordinate with multi-disciplined teams, including sales personnel and field team, to develop a scope of work and estimate the cost of a project.
Organize material and complete reports according to pre-defined standards regarding order, clarity, conciseness, style, and terminology.
Evaluate current processes and develop innovative approaches for improvement. Write and develop in-house training materials supporting the staff and franchise partners.
Contacts and communicates directly with all levels of company management, staff members, and clients.
OTHER SKILLS AND ABILITIES:
Bachelor's Degree in an Engineering field (preferred) Industry certificates are preferred but not required. Ability to obtain Engineer Intern certification preferred but not required. Working knowledge of Heating, Ventilation, and Air Conditioning systems. Familiarity with current building, energy, and mechanical codes and standards.
Understanding of Indoor Air Quality and how it affects the building occupants.
Understanding of HVAC design principles, including heating load, air change, and ventilation requirements, and applying different HVAC systems (Constant volume, VAV, 100% OA, ERV units, etc.). Understanding of HVAC engineering fundamentals, including load calculations, conceptual systems analysis through construction documentation design, equipment design and layout, and duct and pipe sizing.
Customer service oriented. Proficient computer skills and strong technical writing skills.
Proficient in Microsoft Office Suite (Word, Excel, and Outlook). Well organized and possess superior time management abilities to support several projects simultaneously. Self-motivated and self-directed while remaining a team player.
Ability to travel out of state up to 50% of the time.
The salary range for applicants in this position generally ranges between $58,000 and $75,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Clearwater, Florida
Posted: 2025-09-18 15:10:19
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
Business Systems Team Leader
General Purpose of the Job:
Provide leadership and project management for SAP and other business systems supporting Supply Chain Management across Tremco's American operations.
This role encompasses business analysis, process design, and the development and implementation of IT solutions aligned with business goals.
The SAP Team Lead is responsible for leading the development and execution of SAP and related business system initiatives.
This includes conducting business analysis, designing and optimizing business processes, and integrating systems across multiple functional areas such as supply chain management, sales and distribution, finance and accounting, and manufacturing.
This position enforces best practices for comprehensive testing of all new and modified system functions and reports, and oversees quality assurance of procedural documentation and training materials.
The role facilitates collaboration between SAP specialists and business departments to identify operational needs and design effective, documented processes supported by SAP solutions.
The Team Lead manages user expectations regarding SAP functionality and ensures that delivered solutions align with Tremco's broader IT and SAP strategy.
This includes providing oversight, governance, and process alignment from a global perspective.
The role also involves analyzing complex business challenges to be solved with SAP and similar automated systems.
Provides technical expertise in identifying, evaluating and developing systems and procedures that are cost effective and meet user requirements.
Configures system settings and options; plans and executes unit, integration and acceptance testing; and creates specifications for systems to meet business requirements.
Design, configuration, and functional experience in SAP.
May lead cross-functional linked teams to address business or systems issues.
Additionally, the position oversees the daily processing of all EDI transactions-managing trading partner communications, coordinating testing, identifying root causes of issues, and handling all SAP EDI/IDoc processing requirements.
Essential Duties and Responsibilities: Note: Include the phrase "Other duties may be assigned.)
Assist in establishing EDI governances, along with implementing these governances
Write functional, technical and data specifications and documentation
Coordinate SAP functional and development resources on EDI projects
Perform and coordinate testing
Lead mapping solutions by gathering business requirements, propose effective remedies, develop and deploy scalable, well-coordinated solutions to business requirements
Working knowledge of business concepts and processes (SAP Sales order processing, Distribution, Invoicing and Purchasing)
Manage EDI specific master data and cross references
Provide communication, documentation and training as necessary to the business users and trading partners who will be impacted by EDI and Integration projects
Monitoring all Inbound and Outbound EDI, ensuring all EDI transactions are processed accurately and on schedule
Provide daily technical and administrative support for all EDI activity, including failed EDI transmissions and transactions
Identify and recommend enhancements to EDI processes or configuration to improve reliability and performance
Drive implementation and enhancement of SAP IBP modules including Demand Planning, Supply Planning, Inventory Optimization, and S&OP.
Collaborate with business units to gather and analyze requirements, translating them into SAP IBP solutions.
Lead system configuration, integration, and testing efforts, ensuring data integrity and process alignment.
Continuously assess and improve existing processes and systems for performance, scalability, and cost-effectiveness.
Supervise support personnel and/or Jr.
Business Analyst
Manages medium-scale SAP projects with teams of 5 or more participants.
Demonstrates strong leadership, organizational and communication skills, and works with end-users and middle management to identify information systems and business solutions (leveraging SAP) that improve operations and enhance profitability.
When evaluating projects, identifies multiple alternatives and objectively evaluates them to determine the best solution for balancing the business needs and cost/benefits.
Designs and implements high quality, information systems business solutions, on-time and within budget.
Develops and implements quality testing protocols.
Provides management of both end-user staff and IT resources for the implementation of information systems and business solutions.
This includes responsibilities associated with day-to-day project management, such as, but not limited to: project definition (scope, timeframe, resources, costs), weekly status, issue identification and resolution, etc.
Provides IT professional development of others through: day-to-day management of project personnel, the on-going objective and performance review process, training, both formal and informal, etc.
Organizes training initiatives related to the effective use of the SAP system.
Develops programs to train and assist employees in the use of SAP business application software.
Programs include training materials, classroom, small-group and one-on-one training.
Acts as liaison to software vendors.
Is actively involved in software and/or functional user groups.
Organizes and leads various in-house user groups to address issue management, to field & manage enhancements requests, and to facilitate the exchange of information and ideas among users in a given functional area of the business operation.
Project management and administration.
Maintains work plans, tracks effort and progress vs.
plan, and provides appropriate status information regarding projects.
Contributes to the development of the SAP budget.
Undertakes cost benefit analyses and makes recommendations to optimize business processes supported by SAP applications, including business re-engineering, systems enhancements and implementation of new IT capabilities.
Manages contracts and service level agreements with vendors and 3rd party service providers, including management of on-site contractors.
Ensures that SAP projects are delivered within established time frames and budget parameters.
Additional Job Functions: (Other Less Critical Job Activities)
Note: Other duties may be assigned, as required, based upon the demands of project or problem resolution specifics.
Competencies:
The competencies listed here are representative of those that must be met to successfully perform the essential functions of this job.
3+ years' experience in the Integrated Business Planning (IBP) modules
5+ years SAP implementation experience.
S4 Hana experience preferred
3+ Years of supporting related SCM and Material Master data including managing data and mass loads / changes
Experience with SAP PP/DS & Digital Manufacturing are a plus
Understanding of ABAP and debugging skills are a plus
Strong customer service skills and orientation.
High degree of flexibility in interface with customers / constituents.
2 years experience in project management skills.
Ability to distinguish, learn and accept differences in business and end-user requirements.
Ability to learn and expand technical knowledge and interpersonal skills.
Highly organized with effective and cycle time sensitive time management and project management skills.
Proficient SAP technical, configuration, and business area knowledge.
Good understanding of EDI and Integration concepts of collecting, transforming, exchanging, consuming data and associated mapping and configuration.
Strong technical knowledge of EDI technologies and standards including Intermediate Documents (IDOC), EDI, Application Link Enabling (ALE), SAP functional expertise; EDI system configuration and support.
Capable of translating customer and internal specifications for enhancements and extensions to electronic data interface application interfaces and maps.
Experience working with Trading Partners and EDI service providers.
Must have good analytical and problem solving skills in order to carry out their daily functions effectively.
Experience with SAP BTP, middleware tools, and integration platforms is a strong plus.
They must have the capability to work well in a team-based environment as well as on their own.
Support of IDOC, RFC, File, Proxy, SOAP, HTTP, REST, SFTP adapters
Integration knowledge on ODATA/Webservice API interface development
Demonstrate strong formal and informal communication skills including: written, oral and team.
Reads, writes, and communicates fluently in English.
Qualifications:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education and/or Experience:
Formal Education Required:
College degree in IT or business is preferred, but not required.
Practical Work Experience Required:
5+ years of experience with EDI document standards (ANSI X12, EDIFACT)
5+ years of experience in SAP ERP - MM, SD, FI, ABAP, IDocs - in the areas of implementation, enhancement and/or production support of EDI
Good understanding of EDI and Integration concepts of collecting, transforming, exchanging & consuming data
Strong technical knowledge of EDI technologies and standards including Intermediate Documents (IDOC), EDI, Application Link Enabling (ALE), SAP functional expertise; EDI system configuration and support
Strong functional and technical knowledge of SAP, especially in the SD & SCM module; ability to navigate throughout the system, data dictionary, and the related table structures
Support of IDOC, RFC, File, Proxy, SOAP, HTTP, REST, SFTP adapters
Hands-on experience with SAP IBP modules and planning functionalities.
ABAP experience is an asset.
Integration knowledge on ODATA/Webservice API interface development
Note: Some of the experiences and time frames may be concurrent.
Special Knowledge and Skill:
In-depth knowledge of specific functional areas of business operations (manufacturing, finance & accounting, sales & distribution, etc.).
In-depth knowledge of the SAP application software, including its functions and capabilities, installation and support requirements.
Proficiency in analysis, design and testing techniques.
Working knowledge of many computing platforms.
Working knowledge of several relational databases.
Working knowledge of IT communications networks.
Analytical Abilities:
Requires a high level of analytical ability and creativity in order to develop effective and cost efficient business solutions, through the deployment of IT.
Language Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.
Ability to write reports, business correspondence, and procedure manuals.
Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
Must be able to read, write and communicate fluently in English.
Mathematical Skills: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, and percentages.
Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
Computer Skills:
Must be highly skilled in the use of personal computers.
This includes, PC operation, printing, file management, and the ability to use Office 365 tools and functionality.
Working knowledge of the following databases: Primary focus on SS4 Hana, Oracle, and other cloud-based applications.
Basic understanding of IT communications networks.
Certificates, Licenses, Registrations:
SAP or other Certifications would be an asset.
Other Qualifications:
Must be available for meetings between 8:30 to 16:30 USA Eastern Standard Time.
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions.
While performing the duties of this job, the employee is regularly required to talk, hear, and use hands to operate a computer and telephone keyboard.
Employee will also be required to view a computer screen on a regular basis.
(80 - 100%)
Sitting at desk or conference table (90 - 100%).
Occasional standing at main computer console in data center (0 - 10%).
Some travel and overnight travel are required to regional offices and plant locations.
(0-25%)
Work Environment:
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions.
Work remotely 90% of the time; may be called in to corporate office from time to time for project meetings.
Occasional visits to manufacturing plants, including office areas and shop floor.
(0 - 10%)
Some overtime, night work and/or weekend work required, related to project work, problem resolution or major IT upgrades (0-20%).
Eye strain could be a problem due to extensive use of a CRT monitor.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2025-09-18 15:10:19
-
JOB DESCRIPTION
Team Leader ERP Development (NA)
Supervises the ERP development staff of the IT department in North America.
In addition, continues to perform development work, while serving as the leader of the team.
Provide leadership and supervision to the ERP development staff of North America, while supporting the definition, analysis and implementation of information systems and business solutions.
This support includes both business processes and IT solutions.
Essential Duties and Responsibilities:
Demonstrate strong leadership while working with the IT development staff, end-users, IT management and business analyst team members, while supporting the implementation of strategic information systems and business solutions that support the operational needs of the business.
Provide supervision of IT resources (primarily the development staff) and other project team members for the implementation of information systems and business solutions.
This includes responsibilities associated with day-to-day project management, such as, but not limited to: project definition (scope, timeframe, resources, costs), weekly status, issue identification and resolution, etc.
Supervises consultants, contract programmers, interns, part-time clerical assistance, and business team members, as needed.
Provide guidance and support IT professional development of the development staff by: day-to-day management of project personnel, setting and monitoring annual performance objectives and conducting performance reviews, training, (formal and informal OJT).
Perform analysis and development duties and activities.
Provide overall development support in the implementation of new ERP application software packages, package modules and new releases upgrades.
Projects may be global and cross-divisional and can be solely business re-engineering and/or IT.
This support should be of the highest quality, on-time and within budget.
Plans and schedules development projects and staff assignments.
Coordinates the scheduling of work with the other IT departments, including business analyst and technical teams, as well as the business community.
Assist in the identification of multiple alternatives and objectively evaluate each for the best solution balancing both business needs and cost benefits.
Demonstrate strong formal and informal communication skills including: written, oral and team.
Reads, writes, and communicates fluently in English.
Other duties may be assigned.
Additional Job Functions: (Other Less Critical Job Activities)
Coordinates / directs the activities of project teams to accomplish the goals of a project.
Team members may be other IT staff, as well as end-user staff.
Note: Other duties may be assigned, as required, based upon the demands of project or problem resolution specifics.
Supervisory Responsibilities:
This position has a staff of professional IT analysts and/or developers as direct reports and is the final decision maker on hiring and terminating.
Also provides direction and supervision to project team members, consultants, contract programmers, interns, and temporary help, as required.
Supervision includes work assignments, discipline, quality/performance reviews, training and scheduling.
Competencies:
Analytical skills, IT technical skills, understanding of business operations, business ethics, problem solving ability, team work, leadership, effective communication skills, organizational skills, professionalism, commitment to quality, ability to manage multiple concurrent projects/tasks.
Qualifications:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education and/or Experience:
Formal Education Required:
College degree in IT or business is preferred, but not required.
Practical Work Experience Required:
5 - 7 years of applications programming experience.
5 - 7 years of systems analysis and design experience.
2 years of experience in project management skills.
2 years of experience in supervision or project leadership, overseeing the work of project team members is preferred, but not required.
Read, write and communicate fluently in English.Special Knowledge and Skill:
Demonstrates leadership and supervisory abilities.
General knowledge and understanding of business operations.
In-depth knowledge of specific functional areas of business operations (manufacturing, finance & accounting, sales & distribution, etc.).
In-depth knowledge of the SAP application software, including its functions and capabilities, installation and support requirements.
Proficiency in analysis, design and testing techniques.
Good project management skills, including planning, methodologies, time tracking, leadership, etc.
Good communication skills.
Working knowledge of many computing platforms.
Working knowledge of several relational databases.
Working knowledge of IT communication networks.
Analytical Abilities:
Requires a high level of analytical ability and creativity to develop effective and cost-efficient business solutions, through the deployment of IT solutions.
Language Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, and governmental regulations.
Ability to write formal business correspondence and specification documents.
Ability to effectively present information and respond to questions from groups of managers, clients, customers, and vendors.
Must be able to read, write and communicate fluently in English.
Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
Technical Skills:
Must be highly skilled in the use of personal computers.
This includes proficient use of Microsoft Office 365 applications, such as, but not limited to, Outlook, Word, Excel, PowerPoint, Visio, SharePoint.
Proficiency with SAP applications and databases, development tools and integration components, such as, but not limited to, ABAP, SAPGUI, Adobe Forms, Adobe Live Cycle Designer, Smartforms, SAPScript, ECC/Oracle, S/4HANA, SAP BW, SAP APO, SAP GTS, SAP Fiori Apps, SAP Netweaver Gateway, SAP PI/XI, Business Explorer, Synactive GuiXT/Liquid UI, debugging and tracing utilities, HTML, XML, SAP Workflow.
Working knowledge of web browsers and VPN clients.
Basic understanding of IT communication networks.
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions.
While performing the duties of this job, the employee is regularly required to talk, hear, and use hands to operate a computer and telephone.
Employee will also be required to view a computer screen on a regular basis.
(80 - 100%)
Sitting at desk or conference table (90 - 100%).
Some travel, including overnight travel, may be required for training opportunities and/or business engagement at various locations.
(0 - 20%)
Works from home and/or in an office environment with controlled climate and generally quiet conditions.
(80 - 100%)
Some travel, including overnight travel, may be required for training opportunities and/or business engagement at various locations.
(0 - 20%)
Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2025-09-18 15:10:16
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
During each term as our R&D Intern/Co-Op they will have the opportunity to perform real-world takes like product testing, data analysis, and prototyping under the guidance of experienced engineers and mentors.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Lead small projects Collect and analyze data Conduct and participate in meetings to communicate information or collaborate on projects Assist with new product development, improving existing products, troubleshooting problems, and managing testing schedules. Learn new technical skills, gain experience with design processes, and contribute to innovation.
EDUCATION REQUIREMENT:
High school graduate or equivalent required. Must be a sophomore, junior or senior in good academic standing, pursuing a bachelor's degree in chemical, electrical or mechanical engineering at an accredited college or university.
EXPERIENCE REQUIREMENT:
Experience with engineering projects focused on improvement and innovation is encouraged but not required
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Understanding process variance and the resultant effects Knowledge of applied statistics Ability to perform problem analysis utilizing problem solving methodology
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The hourly rate for applicants in this position starts at $20 per hour and increases based on college progression and repeat internship or co-op opportunities.
This rate is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2025-09-18 15:10:08
-
JOB DESCRIPTION
Summary:
Carboline is seeking a strategic and collaborative Project Development Manager in the Central Region (Chicago, St.
Louis, Minneapolis, Kansas City, Detroit, Indianapolis, etc.) with a proactive approach to drive major project growth through early engagement with engineers, architects, EPCs, and other key influencers.
This role leads cross-functional teams to ensure Carboline is specified early in the design cycle and delivers winning outcomes.
Ideal candidates bring strong leadership, influencing skills, excellent communication, and analytical expertise-especially in pipeline management.
Minimum Requirements:
Bachelor's degree or technical discipline or equivalent experience.
Minimum 5 years of sales experience with a proven track record in project selling and specification influence.
Strong leadership and coordination skills across cross-functional teams.
Excellent communication, presentation, and facilitation abilities.
Analytical mindset with pipeline management expertise (Salesforce experience preferred).
Valid driver's license.
Physical Requirements:
Minimal physical activity; occasional lifting up to 50 lbs.
Extended computer usage (up to 8 hours/day).
Occasional exposure to chemicals.
Travel by car or air up to 50%, including overnight stays.
Essential Functions:
Identify and engage major projects early in the design cycle to influence specifications and construction documents.
Build and manage a robust pipeline of strategic projects within your territory/market.
Develop and execute project pursuit strategies that position Carboline for success.
Cultivate relationships with engineers, architects, EPCs, consultants, and owners.
Lead internal coordination across Sales, Business Development, Marketing, and Project Development teams.
Champion high-value projects internally, mobilizing resources and driving alignment.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best."Apply for this ad Online! ....Read more...
Type: Permanent Location: St. Louis, Missouri
Posted: 2025-09-18 15:09:57
-
JOB DESCRIPTION
Team Leader ERP Development (NA)
Supervises the ERP development staff of the IT department in North America.
In addition, continues to perform development work, while serving as the leader of the team.
Provide leadership and supervision to the ERP development staff of North America, while supporting the definition, analysis and implementation of information systems and business solutions.
This support includes both business processes and IT solutions.
Essential Duties and Responsibilities:
Demonstrate strong leadership while working with the IT development staff, end-users, IT management and business analyst team members, while supporting the implementation of strategic information systems and business solutions that support the operational needs of the business.
Provide supervision of IT resources (primarily the development staff) and other project team members for the implementation of information systems and business solutions.
This includes responsibilities associated with day-to-day project management, such as, but not limited to: project definition (scope, timeframe, resources, costs), weekly status, issue identification and resolution, etc.
Supervises consultants, contract programmers, interns, part-time clerical assistance, and business team members, as needed.
Provide guidance and support IT professional development of the development staff by: day-to-day management of project personnel, setting and monitoring annual performance objectives and conducting performance reviews, training, (formal and informal OJT).
Perform analysis and development duties and activities.
Provide overall development support in the implementation of new ERP application software packages, package modules and new releases upgrades.
Projects may be global and cross-divisional and can be solely business re-engineering and/or IT.
This support should be of the highest quality, on-time and within budget.
Plans and schedules development projects and staff assignments.
Coordinates the scheduling of work with the other IT departments, including business analyst and technical teams, as well as the business community.
Assist in the identification of multiple alternatives and objectively evaluate each for the best solution balancing both business needs and cost benefits.
Demonstrate strong formal and informal communication skills including: written, oral and team.
Reads, writes, and communicates fluently in English.
Other duties may be assigned.
Additional Job Functions: (Other Less Critical Job Activities)
Coordinates / directs the activities of project teams to accomplish the goals of a project.
Team members may be other IT staff, as well as end-user staff.
Note: Other duties may be assigned, as required, based upon the demands of project or problem resolution specifics.
Supervisory Responsibilities:
This position has a staff of professional IT analysts and/or developers as direct reports and is the final decision maker on hiring and terminating.
Also provides direction and supervision to project team members, consultants, contract programmers, interns, and temporary help, as required.
Supervision includes work assignments, discipline, quality/performance reviews, training and scheduling.
Competencies:
Analytical skills, IT technical skills, understanding of business operations, business ethics, problem solving ability, team work, leadership, effective communication skills, organizational skills, professionalism, commitment to quality, ability to manage multiple concurrent projects/tasks.
Qualifications:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education and/or Experience:
Formal Education Required:
College degree in IT or business is preferred, but not required.
Practical Work Experience Required:
5 - 7 years of applications programming experience.
5 - 7 years of systems analysis and design experience.
2 years of experience in project management skills.
2 years of experience in supervision or project leadership, overseeing the work of project team members is preferred, but not required.
Read, write and communicate fluently in English.Special Knowledge and Skill:
Demonstrates leadership and supervisory abilities.
General knowledge and understanding of business operations.
In-depth knowledge of specific functional areas of business operations (manufacturing, finance & accounting, sales & distribution, etc.).
In-depth knowledge of the SAP application software, including its functions and capabilities, installation and support requirements.
Proficiency in analysis, design and testing techniques.
Good project management skills, including planning, methodologies, time tracking, leadership, etc.
Good communication skills.
Working knowledge of many computing platforms.
Working knowledge of several relational databases.
Working knowledge of IT communication networks.
Analytical Abilities:
Requires a high level of analytical ability and creativity to develop effective and cost-efficient business solutions, through the deployment of IT solutions.
Language Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, and governmental regulations.
Ability to write formal business correspondence and specification documents.
Ability to effectively present information and respond to questions from groups of managers, clients, customers, and vendors.
Must be able to read, write and communicate fluently in English.
Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
Technical Skills:
Must be highly skilled in the use of personal computers.
This includes proficient use of Microsoft Office 365 applications, such as, but not limited to, Outlook, Word, Excel, PowerPoint, Visio, SharePoint.
Proficiency with SAP applications and databases, development tools and integration components, such as, but not limited to, ABAP, SAPGUI, Adobe Forms, Adobe Live Cycle Designer, Smartforms, SAPScript, ECC/Oracle, S/4HANA, SAP BW, SAP APO, SAP GTS, SAP Fiori Apps, SAP Netweaver Gateway, SAP PI/XI, Business Explorer, Synactive GuiXT/Liquid UI, debugging and tracing utilities, HTML, XML, SAP Workflow.
Working knowledge of web browsers and VPN clients.
Basic understanding of IT communication networks.
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions.
While performing the duties of this job, the employee is regularly required to talk, hear, and use hands to operate a computer and telephone.
Employee will also be required to view a computer screen on a regular basis.
(80 - 100%)
Sitting at desk or conference table (90 - 100%).
Some travel, including overnight travel, may be required for training opportunities and/or business engagement at various locations.
(0 - 20%)
Works from home and/or in an office environment with controlled climate and generally quiet conditions.
(80 - 100%)
Some travel, including overnight travel, may be required for training opportunities and/or business engagement at various locations.
(0 - 20%)
Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2025-09-18 15:09:53
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
Business Systems Team Leader
General Purpose of the Job:
Provide leadership and project management for SAP and other business systems supporting Supply Chain Management across Tremco's American operations.
This role encompasses business analysis, process design, and the development and implementation of IT solutions aligned with business goals.
The SAP Team Lead is responsible for leading the development and execution of SAP and related business system initiatives.
This includes conducting business analysis, designing and optimizing business processes, and integrating systems across multiple functional areas such as supply chain management, sales and distribution, finance and accounting, and manufacturing.
This position enforces best practices for comprehensive testing of all new and modified system functions and reports, and oversees quality assurance of procedural documentation and training materials.
The role facilitates collaboration between SAP specialists and business departments to identify operational needs and design effective, documented processes supported by SAP solutions.
The Team Lead manages user expectations regarding SAP functionality and ensures that delivered solutions align with Tremco's broader IT and SAP strategy.
This includes providing oversight, governance, and process alignment from a global perspective.
The role also involves analyzing complex business challenges to be solved with SAP and similar automated systems.
Provides technical expertise in identifying, evaluating and developing systems and procedures that are cost effective and meet user requirements.
Configures system settings and options; plans and executes unit, integration and acceptance testing; and creates specifications for systems to meet business requirements.
Design, configuration, and functional experience in SAP.
May lead cross-functional linked teams to address business or systems issues.
Additionally, the position oversees the daily processing of all EDI transactions-managing trading partner communications, coordinating testing, identifying root causes of issues, and handling all SAP EDI/IDoc processing requirements.
Essential Duties and Responsibilities: Note: Include the phrase "Other duties may be assigned.)
Assist in establishing EDI governances, along with implementing these governances
Write functional, technical and data specifications and documentation
Coordinate SAP functional and development resources on EDI projects
Perform and coordinate testing
Lead mapping solutions by gathering business requirements, propose effective remedies, develop and deploy scalable, well-coordinated solutions to business requirements
Working knowledge of business concepts and processes (SAP Sales order processing, Distribution, Invoicing and Purchasing)
Manage EDI specific master data and cross references
Provide communication, documentation and training as necessary to the business users and trading partners who will be impacted by EDI and Integration projects
Monitoring all Inbound and Outbound EDI, ensuring all EDI transactions are processed accurately and on schedule
Provide daily technical and administrative support for all EDI activity, including failed EDI transmissions and transactions
Identify and recommend enhancements to EDI processes or configuration to improve reliability and performance
Drive implementation and enhancement of SAP IBP modules including Demand Planning, Supply Planning, Inventory Optimization, and S&OP.
Collaborate with business units to gather and analyze requirements, translating them into SAP IBP solutions.
Lead system configuration, integration, and testing efforts, ensuring data integrity and process alignment.
Continuously assess and improve existing processes and systems for performance, scalability, and cost-effectiveness.
Supervise support personnel and/or Jr.
Business Analyst
Manages medium-scale SAP projects with teams of 5 or more participants.
Demonstrates strong leadership, organizational and communication skills, and works with end-users and middle management to identify information systems and business solutions (leveraging SAP) that improve operations and enhance profitability.
When evaluating projects, identifies multiple alternatives and objectively evaluates them to determine the best solution for balancing the business needs and cost/benefits.
Designs and implements high quality, information systems business solutions, on-time and within budget.
Develops and implements quality testing protocols.
Provides management of both end-user staff and IT resources for the implementation of information systems and business solutions.
This includes responsibilities associated with day-to-day project management, such as, but not limited to: project definition (scope, timeframe, resources, costs), weekly status, issue identification and resolution, etc.
Provides IT professional development of others through: day-to-day management of project personnel, the on-going objective and performance review process, training, both formal and informal, etc.
Organizes training initiatives related to the effective use of the SAP system.
Develops programs to train and assist employees in the use of SAP business application software.
Programs include training materials, classroom, small-group and one-on-one training.
Acts as liaison to software vendors.
Is actively involved in software and/or functional user groups.
Organizes and leads various in-house user groups to address issue management, to field & manage enhancements requests, and to facilitate the exchange of information and ideas among users in a given functional area of the business operation.
Project management and administration.
Maintains work plans, tracks effort and progress vs.
plan, and provides appropriate status information regarding projects.
Contributes to the development of the SAP budget.
Undertakes cost benefit analyses and makes recommendations to optimize business processes supported by SAP applications, including business re-engineering, systems enhancements and implementation of new IT capabilities.
Manages contracts and service level agreements with vendors and 3rd party service providers, including management of on-site contractors.
Ensures that SAP projects are delivered within established time frames and budget parameters.
Additional Job Functions: (Other Less Critical Job Activities)
Note: Other duties may be assigned, as required, based upon the demands of project or problem resolution specifics.
Competencies:
The competencies listed here are representative of those that must be met to successfully perform the essential functions of this job.
3+ years' experience in the Integrated Business Planning (IBP) modules
5+ years SAP implementation experience.
S4 Hana experience preferred
3+ Years of supporting related SCM and Material Master data including managing data and mass loads / changes
Experience with SAP PP/DS & Digital Manufacturing are a plus
Understanding of ABAP and debugging skills are a plus
Strong customer service skills and orientation.
High degree of flexibility in interface with customers / constituents.
2 years experience in project management skills.
Ability to distinguish, learn and accept differences in business and end-user requirements.
Ability to learn and expand technical knowledge and interpersonal skills.
Highly organized with effective and cycle time sensitive time management and project management skills.
Proficient SAP technical, configuration, and business area knowledge.
Good understanding of EDI and Integration concepts of collecting, transforming, exchanging, consuming data and associated mapping and configuration.
Strong technical knowledge of EDI technologies and standards including Intermediate Documents (IDOC), EDI, Application Link Enabling (ALE), SAP functional expertise; EDI system configuration and support.
Capable of translating customer and internal specifications for enhancements and extensions to electronic data interface application interfaces and maps.
Experience working with Trading Partners and EDI service providers.
Must have good analytical and problem solving skills in order to carry out their daily functions effectively.
Experience with SAP BTP, middleware tools, and integration platforms is a strong plus.
They must have the capability to work well in a team-based environment as well as on their own.
Support of IDOC, RFC, File, Proxy, SOAP, HTTP, REST, SFTP adapters
Integration knowledge on ODATA/Webservice API interface development
Demonstrate strong formal and informal communication skills including: written, oral and team.
Reads, writes, and communicates fluently in English.
Qualifications:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education and/or Experience:
Formal Education Required:
College degree in IT or business is preferred, but not required.
Practical Work Experience Required:
5+ years of experience with EDI document standards (ANSI X12, EDIFACT)
5+ years of experience in SAP ERP - MM, SD, FI, ABAP, IDocs - in the areas of implementation, enhancement and/or production support of EDI
Good understanding of EDI and Integration concepts of collecting, transforming, exchanging & consuming data
Strong technical knowledge of EDI technologies and standards including Intermediate Documents (IDOC), EDI, Application Link Enabling (ALE), SAP functional expertise; EDI system configuration and support
Strong functional and technical knowledge of SAP, especially in the SD & SCM module; ability to navigate throughout the system, data dictionary, and the related table structures
Support of IDOC, RFC, File, Proxy, SOAP, HTTP, REST, SFTP adapters
Hands-on experience with SAP IBP modules and planning functionalities.
ABAP experience is an asset.
Integration knowledge on ODATA/Webservice API interface development
Note: Some of the experiences and time frames may be concurrent.
Special Knowledge and Skill:
In-depth knowledge of specific functional areas of business operations (manufacturing, finance & accounting, sales & distribution, etc.).
In-depth knowledge of the SAP application software, including its functions and capabilities, installation and support requirements.
Proficiency in analysis, design and testing techniques.
Working knowledge of many computing platforms.
Working knowledge of several relational databases.
Working knowledge of IT communications networks.
Analytical Abilities:
Requires a high level of analytical ability and creativity in order to develop effective and cost efficient business solutions, through the deployment of IT.
Language Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.
Ability to write reports, business correspondence, and procedure manuals.
Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
Must be able to read, write and communicate fluently in English.
Mathematical Skills: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, and percentages.
Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
Computer Skills:
Must be highly skilled in the use of personal computers.
This includes, PC operation, printing, file management, and the ability to use Office 365 tools and functionality.
Working knowledge of the following databases: Primary focus on SS4 Hana, Oracle, and other cloud-based applications.
Basic understanding of IT communications networks.
Certificates, Licenses, Registrations:
SAP or other Certifications would be an asset.
Other Qualifications:
Must be available for meetings between 8:30 to 16:30 USA Eastern Standard Time.
Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions.
While performing the duties of this job, the employee is regularly required to talk, hear, and use hands to operate a computer and telephone keyboard.
Employee will also be required to view a computer screen on a regular basis.
(80 - 100%)
Sitting at desk or conference table (90 - 100%).
Occasional standing at main computer console in data center (0 - 10%).
Some travel and overnight travel are required to regional offices and plant locations.
(0-25%)
Work Environment:
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions.
Work remotely 90% of the time; may be called in to corporate office from time to time for project meetings.
Occasional visits to manufacturing plants, including office areas and shop floor.
(0 - 10%)
Some overtime, night work and/or weekend work required, related to project work, problem resolution or major IT upgrades (0-20%).
Eye strain could be a problem due to extensive use of a CRT monitor.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2025-09-18 15:09:48
-
My client is the leading design and manufacturing company specialising in power supplies and associated electronics systems for the Defence and Aerospace industries.
They are currently looking for an Electronic Assembler to join their team based in St Neots.
Key responsibilities of the Electronic Assembler job opportunity based in St Neots:
Assemble mechanical and electrical sub-assemblies
Perform product testing for performance, safety, and compliance following Acceptance Test Procedures(ATP)
Diagnose and repair faults in both sub-assemblies and final products
Interpret engineering drawings and carry out precision soldering to IPC 610 and IPC 620 standards
Experience required for the Electronic Assembler job opportunity based in St Neots:
HNC in a relevant subject (desirable)
Hands-on soldering experience within the electronics manufacturing industry
Familiarity with oscilloscopes, multimeters, and automated test equipment
If this Electronic Assembler job opportunity based in St Neots could be of interest, send your CV to bwiles@redlinegroup.Com, or call Ben on 01582 878816 / 07471181784. ....Read more...
Type: Permanent Location: Cambridgeshire, England
Start: ASAP
Salary / Rate: £26000 - £30000 per annum
Posted: 2025-09-18 13:58:27
-
An opportunity has arisen for a Design Draughts Person to join a well-established distribution business supplying specialist industrial components to a wide range of customers across the UK.
As a Design Draughts Person, you will be creating detailed designs and drawings, supporting multiple projects from concept to completion while ensuring technical accuracy.This role offers salary range £30,000 - £35,000 and benefits.
You will be responsible for:
* Producing 2D and 3D drawings in line with project requirements.
* Preparing detailed material and component lists.
* Ensuring compliance with current industry regulations and maintaining accurate records.
* Researching, quoting, and ordering bespoke materials and components.
* Managing several projects simultaneously to agreed timescales.
* Providing technical support to fabricators during the build process.
* Collaborating closely with suppliers and manufacturers.
What we are looking for:
* Previously worked as a Design Draughtsperson, Design Draughtsman, Draughtsperson, CAD Design, CAD Engineer, CAD Design Engineer or in a similar role.
* Solid design background within a relevant industry or structural engineering.
* Experience in sourcing, quoting, and ordering materials and components.
* HNC/HND in an engineering discipline.
* Strong knowledge of AutoCAD 2D (primary software) and Inventor 3D.
* Familiarity with design and AutoCAD standards.
* Skilled in Microsoft Office, particularly Excel.
* Full UK driving licence.
Shift:
* Monday - Friday: 08:30 - 17:00
What's on offer:
* Competitive salary
* 20 days holiday plus bank holidays
* Auto-enrolment pension scheme
Apply today for this fantastic opportunity to join a growing organisation in a pivotal role.
Important Information: We endeavour to process your personal data in a fair and transparent manner.
In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message.
For more information see our Privacy Policy on our website.
It is important you are aware of your individual rights and the provisions the company has put in place to protect your data.
If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Type: Permanent Location: Altrincham, England
Start:
Duration:
Salary / Rate: £30000 - £35000 Per Annum
Posted: 2025-09-18 10:06:42
-
Medical Devices Project Leader - Cambridge
We are seeking a dynamic and driven Project Leader to join our innovative medical devices team based in Cambridge.
This is a unique opportunity to lead cutting-edge development projects that directly impact patient care and improve lives.
You'll be at the heart of a multidisciplinary environment, guiding cross-functional teams through the full product lifecycle—from concept to commercialisation.
The ideal candidate will bring proven experience in project leadership within the medical technology or life sciences sector, with a strong grasp of regulatory pathways and product development processes.
You'll be comfortable navigating complex technical challenges, managing timelines and budgets, and communicating effectively with stakeholders at all levels.
A strong academic foundation is essential.
We're looking for someone with a degree in a discipline that naturally leads into medical device design—mechanical engineering, electronics engineering, biomedical engineering, or a closely related field.
Your technical background will allow you to engage meaningfully with design teams and contribute to the development of robust, compliant, and innovative solutions.
Mentorship is a key part of this role.
We believe in nurturing talent and fostering growth, and you'll be expected to support and guide junior members of staff, helping them develop both technically and professionally.
Your ability to lead by example and share knowledge will be instrumental in building a high-performing, collaborative team culture.
What sets you apart is not just your professional expertise, but your mindset.
We value individuals who approach problems with curiosity and creativity.
If you have a technical hobby—whether it's tinkering with electronics, building software, or engineering side projects—that demonstrates your passion for problem solving, we see that as a distinct advantage.
In return, you'll be rewarded with an excellent starting salary, a comprehensive pension scheme, performance-related bonuses, and access to ongoing career development and skills training.
This is a role where your growth is taken seriously, and your contributions are genuinely valued.
For more information, please contact Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery Recruitment at Newton Colmore, on +44 121 268 2240.
Alternatively, submit your application and a member of our team will be in touch.
Please note that without a CV, we can only provide limited information.
....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: Pension, bonus, medical etc.
Posted: 2025-09-18 09:51:12
-
Optical Systems Engineer - Medical Devices - Cambridge
We are working with a leading Medical Devices company in Cambridge to recruit an Optical Systems Engineer who will play a key role in the development of industry disrupting and lifesaving/improving Medical Technologies.
This is a hands-on engineering role where you'll be designing and integrating optical systems into complex medical technologies.
From early feasibility through to product launch, you'll be involved in every stage of development, helping to shape devices that improve diagnostics, treatment, and patient outcomes across a range of clinical applications.
You'll be joining a multidisciplinary team of engineers and scientists, collaborating on projects that demand precision, creativity, and a deep understanding of how optics interact with mechanical, electronic, and biological systems.
Your work will span simulation, prototyping, testing, and refinement, with a strong emphasis on regulatory compliance and real-world usability.
We're looking for someone with a solid academic foundation in physics, engineering, or a related discipline, and hands-on experience in optical design and analysis.
You should be confident using industry-standard tools and have a track record of delivering robust solutions in regulated environments.
Experience in medical devices is highly desirable, but not essential if you bring strong transferable skills and a passion for healthcare innovation.
This role is ideal for someone who enjoys solving technical challenges, mentoring junior colleagues, and working closely with clients to bring ideas to life.
You'll be encouraged to explore new approaches, contribute to system-level thinking, and help shape the future of medical technology.
In return, you'll receive a competitive salary, annual bonus, private healthcare, generous pension contributions, and access to a wide range of lifestyle and professional development benefits.
For more information, please contact Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery Recruitment at Newton Colmore, on +44 121 268 2240.
Alternatively, submit your application and a member of our team will be in touch.
Please note that without a CV, we can only provide limited information. ....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: Pension, bonus, medical etc.
Posted: 2025-09-18 09:50:41
-
JOB DESCRIPTION
We are seeking an experienced and innovative Senior Chemist with deep expertise in aerosol coatings to join our R&D team in the Consumer Product Goods (CPG) sector.
This role focuses on developing and optimizing aerosol coating products, ensuring they meet the highest standards of performance, safety, and regulatory compliance.
The ideal candidate will possess a strong background in chemistry, particularly in the formulation and application of aerosol products.
Technology Competency:
The R&D Scientist candidate will demonstrate and apply the following skills to their work. Strong understanding of Scientific Methodology.
Hypothesis driven research and problem-solving capability using experimental design, data analysis and documentation. Coating Chemistries: alkyd, acrylic, epoxy, urethane, phenolic, polyaspartics and sil(ox)anes etc. Coating Formulation Science: Lead the design, development, and optimization of aerosol coating formulations, including paints, sprays, and specialty coatings for various consumer applications both solvent borne and waterborne Utilize in-depth knowledge of aerosol technology, including propellant systems, valve systems, and spray mechanisms, to develop high-performance products. Analytical science and material science with an emphasis on structure-property relationship
Technical Leadership:
Ability to develop and implement project plans and timelines while managing multiple high level projects.
Measuring progress and providing updates in alignment with marketing Demonstrated capability of becoming a vocal and influential voice in project planning and deliverables together in collaboration with a cross functional team Ability to make strategic decisions (technical and staff utilization) and influence leaders and scientist to execute those initiative while managing business strategy and value creation Outstanding technical skills, interpersonal communication, and presentation skills.
The R&D Scientist must demonstrate and apply the following skills. Drive product innovation by researching and integrating new raw materials, technologies, and methodologies into aerosol formulations to enhance performance, durability, and user experience. Proven track record of identifying, researching and prototyping innovative ideas. Address and resolve complex formulation and application challenges, including issues related to stability, compatibility, and application efficacy Continuous learning and intimate awareness of open literature and competitive landscape The R&D Scientist works to assist in the allocation of resources towards initiatives by working with the leadership team to identify long term platform strategies The R&D Scientist demonstrates the ability to have influence in decision making and a demonstrated ability to communicate with project stakeholders and cross-functional teams, leadership and the external scientific community
Organization Leadership:
The R&D Scientist should exhibit the following attributes: Agility to respond to emerging business needs with strong management of change skills Builds strong partnerships internally within R&D, internal functions (marketing, manufacturing, sourcing, etc.) and externally (vendors, customers, etc.) Manage high stakes and challenging situations with all levels of the organization Assess the organizational processes and develop new processes to improve efficiency and quality Demonstrate strong career ambition - potential to become a top leader Strong business acumen
Education Guidelines
BS in Chemistry, Chemical Engineering, Materials, or other equivalent scientific field required MS or PhD strongly preferred Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin
Posted: 2025-09-18 00:00:52
-
Redline has been retained by a leading process instrumentation manufacturer who are looking for a Electronics Design Engineer to join their R&D team based in Surrey.
Due to significant growth, they are seeking an Electronics Design Engineer to be responsible for the design and development of analogue and digital circuit design across new and existing products, going into a variety of regulated industries.
You will be involved with PCB design, prototyping, test and validation and software interface.
The nature of the industry and products will require someone who is a British Citizen.
Key skills and experience for Electronics Design Engineer, based in Surrey:
Proven experience within a senior electronics design role - mentor or managed small teams
Mixed signal design within a regulated industry i.E.
Defence, Aerospace, Medical, Automotive etc.
Degree qualified in a related Electronics discipline
Circuit and PCB design
C Software programming
Excellent verbal and written communication skills
This is an exciting opportunity to join a growing company who can offer the opportunity for career progression and personal development.
To apply for this Electronics Design Engineer job, based in Surrey, please send your CV to Rwilcocks@redlinegroup.Com, or for more information contact Ricky Wilcocks on 01582 878810 or 079317 88834. ....Read more...
Type: Permanent Location: Surrey, England
Start: ASAP
Salary / Rate: £35000 - £45000 per annum
Posted: 2025-09-18 00:00:02
-
JOB DESCRIPTION
We are seeking an experienced and innovative Senior Chemist with deep expertise in aerosol coatings to join our R&D team in the Consumer Product Goods (CPG) sector.
This role focuses on developing and optimizing aerosol coating products, ensuring they meet the highest standards of performance, safety, and regulatory compliance.
The ideal candidate will possess a strong background in chemistry, particularly in the formulation and application of aerosol products.
Technology Competency:
The R&D Scientist candidate will demonstrate and apply the following skills to their work. Strong understanding of Scientific Methodology.
Hypothesis driven research and problem-solving capability using experimental design, data analysis and documentation. Coating Chemistries: alkyd, acrylic, epoxy, urethane, phenolic, polyaspartics and sil(ox)anes etc. Coating Formulation Science: Lead the design, development, and optimization of aerosol coating formulations, including paints, sprays, and specialty coatings for various consumer applications both solvent borne and waterborne Utilize in-depth knowledge of aerosol technology, including propellant systems, valve systems, and spray mechanisms, to develop high-performance products. Analytical science and material science with an emphasis on structure-property relationship
Technical Leadership:
Ability to develop and implement project plans and timelines while managing multiple high level projects.
Measuring progress and providing updates in alignment with marketing Demonstrated capability of becoming a vocal and influential voice in project planning and deliverables together in collaboration with a cross functional team Ability to make strategic decisions (technical and staff utilization) and influence leaders and scientist to execute those initiative while managing business strategy and value creation Outstanding technical skills, interpersonal communication, and presentation skills.
The R&D Scientist must demonstrate and apply the following skills. Drive product innovation by researching and integrating new raw materials, technologies, and methodologies into aerosol formulations to enhance performance, durability, and user experience. Proven track record of identifying, researching and prototyping innovative ideas. Address and resolve complex formulation and application challenges, including issues related to stability, compatibility, and application efficacy Continuous learning and intimate awareness of open literature and competitive landscape The R&D Scientist works to assist in the allocation of resources towards initiatives by working with the leadership team to identify long term platform strategies The R&D Scientist demonstrates the ability to have influence in decision making and a demonstrated ability to communicate with project stakeholders and cross-functional teams, leadership and the external scientific community
Organization Leadership:
The R&D Scientist should exhibit the following attributes: Agility to respond to emerging business needs with strong management of change skills Builds strong partnerships internally within R&D, internal functions (marketing, manufacturing, sourcing, etc.) and externally (vendors, customers, etc.) Manage high stakes and challenging situations with all levels of the organization Assess the organizational processes and develop new processes to improve efficiency and quality Demonstrate strong career ambition - potential to become a top leader Strong business acumen
Education Guidelines
BS in Chemistry, Chemical Engineering, Materials, or other equivalent scientific field required MS or PhD strongly preferred Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin
Posted: 2025-09-17 23:59:33
-
I have an exciting opportunity for a Data Engineer to join an Agritech company based in Scotland.
Your prime responsibility is to create data models, pipelines, and analysis tools in Azure cloud to provide real time control and information for market leading product solutions.
Candidate Requirements
Experience working with Python Programming language
SQL
Azure
Knowledge of Artificial Intelligence, Deep Learning, Machine Learning
ETL Design
CI/CD
Unit testing
Docker
Type: Permanent Location: Edinburgh, Scotland
Start: ASAP
Duration: Permanent
Salary / Rate: £40000 - £52000 Per Annum None
Posted: 2025-09-17 21:24:03
-
Our client has an opportunity for a PCB Engineer.
Main duties are transferring of new hardware products from the initial design to mass production.
The candidate must be inquisitive and driven to strive for excellence in manufacturing.
Key Responsibilities
Support the PCB Engineer in the development of test processes, training, and manufacturing transfer to Production.
Work with the design engineers to ensure new products are manufacturable with consideration to Design for Test, Design for Manufacturing, Design for Assembly.
Support the development and implementation of automated testing for production and our external manufacturing partners.
Essential skills
Key requirements are an aptitude for electronics manufacturing, enthusiasm for efficiency, and desire to make process improvements.
Suitable candidates will be ideally educated to a degree level in Electronic Engineering (or equivalent)
Previous experience in electronic PCB manufacture, designing circuits, soldering, and Arduino development would be advantageous. ....Read more...
Type: Permanent Location: Bicester, England
Start: ASAP
Duration: Permanent
Salary / Rate: £30000 - £40000 Per Annum None
Posted: 2025-09-17 21:21:00
-
A global leader in Biometrics Verification is looking for a Senior Python Engineer to join their growing Innovation Team.
They work closely with global banks, governments, travel and healthcare providers to provide secure and faster Biometric verification.
You will be responsible for designing, developing and maintaining new greenfield product solutions.
You will also contribute to the broader research of the company products.
Candidate requirements
Strong and extensive experience with Python.
Knowledge of decentralised authentication systems.
Experience working with REST APIs.
Knowledge and experience with SSO Technologies.
....Read more...
Type: Permanent Location: London, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £65000 Per Annum None
Posted: 2025-09-17 21:19:58
-
Electronic System and Hardware Design Engineer required to work with research teams designing novel military, marine and aeronautical battery systems.
My client designs and manufactures specialist batteries, chargers and intelligent power management systems for rugged, high-performance applications.
Skills
Mixed signal analogue and digital system design experience, of measurement or data acquisition circuits.
Degree qualified with commercial electronics design and test experience.
Prototyping, debugging and functional testing of complex electronic boards.
Power electronics knowledge, ideally of DC-DC converter-based systems.
Microprocessor hardware design.
Also practical electrical skills e.g.
soldering, troubleshooting, wiring and general test equipment. ....Read more...
Type: Permanent Location: Ash Vale, England
Start: ASAP
Duration: Permanent
Salary / Rate: £42000 - £60000 Per Annum None
Posted: 2025-09-17 21:13:50
-
I have a client looking for an experienced Electronics Design Engineer to join their growing team of Engineers.
The company designs and manufactures bespoke battery solutions for top tier clients including UK defence and UK military.
Your prime responsibility will be to design complex analogue and digital systems with power elements.
Essential Skills
Relevant degree and Experience in Electronic Design.
Knowledge of measurement and acquisition of Circuit Design.
Knowledge of Electromagnetic design principles and experience working with EMC design and application.
Experience in prototyping, debugging and function test of complex electronic systems.
Desirable Skills
Knowledge and understanding of Electronics communication protocols such as I2C, SPI, CAN etc.
Experience working with power electronics. ....Read more...
Type: Permanent Location: Aldershot, England
Start: ASAP
Duration: Permanent
Salary / Rate: £40000 - £55000 Per Annum None
Posted: 2025-09-17 21:12:48
-
Electronic Manufacturing Technician required to test, fault find and repair various electrical or electronic systems and components of rotary steerable systems, Measurement While Drilling tools, Specialised Measurement tools and Rechargeable Batteries for Downhole use and power source products.
You will work as part of engineering and quality driven manufacturing teams covering Mechanical manufacturing Technicians and supervisors integrating and testing electrical and electromechanical tools.
You will also be responsible for maintaining and repairing the test equipment used to test tools.
Experience
Electronic technician experience of testing, low and high voltage experience, basic soldering, crimping, and assembly.
Basic fault finding and rectification at system and component level.
Further education in Electrical or Electronic engineering (ONC, HNC, HND, NVQ Level 2)
Working within design constraints.
Multi-meter, Oscilloscope, Low Voltage Power Supplies, High Voltage Power Supply (up to 400VDC) to make measurements on and for test and debugging of electromechanical assemblies
Responsibilities
Producing deliverable items from full drawing packs with minimal additional help to relevant IPC standards.
....Read more...
Type: Permanent Location: Dyce, Scotland
Start: ASAP
Duration: Permanent
Salary / Rate: £25000 - £32000 Per Annum None
Posted: 2025-09-17 21:08:46
