-
Microwave Antenna and RF Design Engineer required to join an RF Microwave module design, development, test as well as antenna design, modelling and requirement translation.
Requirements
Microwave frequency PCB Design experience
RF system design knowledge of cascade analysis or receiver to transmitter performance
High Power RF amplifier, Low Noise Amplifiers, Limiters, Circulators, Filters, Mixers, Phase Locked Loop usage design, build and test.
Antenna theory and design with array antennas slotted array and printed antennas.
Altium, Altair, digital electronics, power electronics etc.
beneficial.
Responsibilities
Antenna and RF equipment design, development and delivery. ....Read more...
Type: Permanent Location: Waltham Cross, England
Start: ASAP
Duration: Permanent
Salary / Rate: £57000 - £85000 Per Annum None
Posted: 2026-05-10 13:49:05
-
Are you a skilled MIG Welder Fabricator looking for more than just repetitive production work? This is an opportunity to join a well-established specialist manufacturer where your skills are genuinely valued, and no two days are the same.MIG Welder Fabricator
Location: Huddersfield
Salary: Up to £17.50, overtime x1.5
Hours: Full Time, Permanent
Benefits: On-site parking, supportive team environment, ongoing skill development
We are recruiting for an experienced MIG Welder Fabricator to join a respected manufacturing business specialising in bespoke heavy vehicle body builds and modifications.
This is a hands-on role working on a wide variety of projects including new body fabrication, vehicle refurbishments, chassis modifications and crane fitting work.Key Responsibilities of the MIG Welder Fabricator
Fabrication and assembly of heavy vehicle components and bespoke body structures
MIG welding heavy plate materials up to 15mm in multiple positions
Chassis alterations and modification work
Refurbishment and repair of existing vehicle bodies
Reading and working from engineering drawings and specifications
Ensuring all fabrication work meets quality and safety standards
Checking dimensions and alignment throughout the build process
Supporting production deadlines while maintaining a high standard of finish
Working collaboratively within a skilled and supportive workshop team
Skills & Experience Required
Strong MIG welding skills with experience in heavy fabrication
Experience working with commercial or heavy vehicles would be advantageous
Ability to work from technical drawings and specifications
Good understanding of health and safety within a workshop environment
Self-motivated with the ability to work independently and as part of a team
Organised approach with good attention to detail
Why Apply?
Join a stable and well-established business with a strong reputation for quality
Work on bespoke and interesting projects rather than repetitive production line work
Be part of a friendly, close-knit and supportive team
Opportunities to broaden your fabrication and engineering skills
Long-term permanent opportunity with excellent workshop culture
If you are an experienced MIG Welder Fabricator looking for your next opportunity within a supportive and skilled engineering environment, then we would love to hear from you.Contact Sophie Ranson at E3 Recruitment for more information. ....Read more...
Type: Permanent Location: Huddersfield, England
Start: ASAP
Salary / Rate: £38000.00 - £48000.00 per annum
Posted: 2026-05-10 09:00:15
-
£27,000 - £28,000 DOE + Overtime at x1.5 + Weekly Pay + Early Friday Finish.
A fantastic opportunity has become available for a Mechanical Assembler to join a market-leading engineering and manufacturing business with a strong reputation for quality, long-term stability, and employee development.
Following significant investment into the site and with a full order book, this is a great opportunity to work within a modern and well-organised production environment.
Full product training will be provided, making this an excellent chance for someone with mechanical assembly or fitting experience to further their career for this globally recognised company.
Benefits of the Mechanical Assembler position:
£27,000 - £28,000 depending on experience
Overtime paid at x1.5
Weekly pay
Early Friday finish
Full product and industry training provided
Stable business with a strong forward order book
Modern working environment with supportive management
As a Mechanical Assembler, you will play a key role within the production team assembling components to a high standard.
Duties will include:
Assembling rotating mechanical components and transmission assemblies to specification
Reading and working from engineering drawings
Using hand tools and assembly equipment
Carrying out assembly and fitting duties
Working to quality and health & safety standards
Supporting the wider production team when required
The Mechanical Assembler opportunity could suit candidates from a range of mechanical or engineering backgrounds including:
Mechanical Fitter
Bench Fitter
Assembly Technician
Hydraulics Engineer
Production Assembler
We would like to speak with people who have:
Previous assembly or fitting experience
The ability to read engineering drawings
Good attention to detail and quality standards
A positive attitude and willingness to learn
Experience using hand and power tools.
If you would like, a private to chat about the Mechanical Assembler role before applying then please contact Rodger Morley at E3 Recruitment.
....Read more...
Type: Permanent Location: Pudsey, England
Start: ASAP
Salary / Rate: £27000 - £30000 per annum
Posted: 2026-05-10 09:00:14
-
Senior RF Antenna Design Engineer - Electronic Warfare
Location: Lincoln, Lincolnshire (Hybrid)
An exciting opportunity has arisen for a Senior RF Antenna Design Engineer to join a confidential, UK-based defence technology organisation specialising in electronic warfare systems.
This role sits within a growing and highly capable RF engineering team developing advanced antenna and RF subsystems across HF to SHF frequencies for complex, mission-critical applications.
This position is ideal for an experienced, hands-on RF and antenna engineer who enjoys technical ownership, solving complex electromagnetic challenges, and mentoring junior engineers, while contributing to the development of a strong UK-based R&D capability.
Main Responsibilities of the Senior RF Antenna Design Engineer (Lincoln / Hybrid):
Design, simulate, and develop RF and microwave antenna systems for electronic warfare applications
Own antenna and RF design activities from concept through simulation, prototyping, test, and production handover
Carry out electromagnetic modelling and optimisation using CST, HFSS, Keysight ADS and Microwave Office
Act as a senior technical contributor on projects, supporting architectural decisions and design reviews
Collaborate closely with RF, electronics, systems, and mechanical engineers to ensure optimal system integration
Support development of RF subsystems including filters, amplifiers, switches, and associated control interfaces
Perform antenna, RF, and EMC testing, correlating lab results with simulation data
Produce high-quality technical documentation and contribute to internal and customer-facing reviews
Mentor and technically support junior RF and antenna engineers within the team
Support proposal activity, requirements definition, and early-stage concept development where required
Requirements of the Senior RF Antenna Design Engineer (Lincoln / Hybrid):
Proven experience in RF and microwave antenna design for defence, electronic warfare, or other high-reliability environments
Strong grounding in electromagnetic theory, RF propagation, and antenna performance metrics
Hands-on experience with CST, HFSS, Keysight Microwave Office and ADS
Practical experience across simulation, prototyping, measurement, and validation
Experience contributing to or leading technical projects and mentoring junior engineers
Ability to communicate complex RF concepts clearly within multidisciplinary teams
British passport holder required due to security clearance requirements
Working Pattern & Benefits:
Full-time, permanent role
Hybrid working, with regular onsite presence in Lincoln
Competitive salary and benefits package
Opportunity to work on cutting-edge electronic warfare antenna and RF technology
Technically driven environment with strong long-term career progression
To apply for this Senior RF Antenna Design Engineer role, please send your CV to Kishan Chandarana:
Kchandarana@redlinegroup.Com
01582 878 830 ....Read more...
Type: Permanent Location: Lincolnshire, England
Start: ASAP
Salary / Rate: £75000 - £90000 per annum
Posted: 2026-05-09 23:00:03
-
The Redline Group are working in collaboration with a leading designer in specialised instrumentation to secure the services of a Contract FPGA Design Engineer - VHDL to work on-site at their offices near Staines.
Commutable from Windsor, Leatherhead and the surrounding areas, this is an initial 3-month opportunity where you will assist in the re-design of key electronics.
Our client has been designing cutting-edge equipment used in a range of industries for many years, focusing on technology which not only provides safety, but will allow analysis and monitoring.
You will join a small design team who have been tasked with a re-design project, creating a secure and robust product which will be in use for years to come.
This role has an indicative OUTSIDE IR35 determination therefore we can accept candidates who would like to operate through their own PSC.
Key Skills Required - Contract FPGA Design Engineer, Staines:
- Proven experience of FPGA development, in particular the Xilinx Spartan family
- Strong experience of using VHDL
- Experience within a scientific/instrumentation/regulated background is not essential but useful.
For more information or to apply for the Contract FPGA Design Engineer opportunity in Staines, please contact Jack Kelly - Jkelly@redlinegroup.Com // 01582 878812 quoting reference JWK1073 ....Read more...
Type: Contract Location: Staines, England
Start: ASAP
Duration: 3 months +
Salary / Rate: £55 - £65 per hour
Posted: 2026-05-09 23:00:03
-
Senior Business Development Manager - Defence Electronics
Location: Canada - Remote
An opportunity has arisen for a Senior Business Development Manager - Defence to join a specialist technology manufacturer delivering rugged industrial computing and embedded server systems for demanding defence and mission-critical environments.
The organisation designs and manufactures custom embedded computing platforms, embedded servers and ruggedised rack computing systems used inside larger defence platforms.
These high-performance systems are engineered for reliability in extreme operational environments where commercial computing solutions cannot operate effectively.
This is a strategic growth role focused on expanding the organisation's presence within the Canadian defence sector, driven by increased localisation initiatives and growing demand for domestically supported defence technology.
The successful candidate will play a key role in building new customer relationships and securing high-value programmes with defence primes and system integrators.
This role is suited to a highly motivated new business hunter with a proven track record of selling complex technical solutions and securing large defence contracts.
Main Responsibilities of the Senior Business Development Manager - Defence (Canada - Remote):
Identify, develop and secure new business opportunities across the Canadian defence sector
Build and manage a strong sales pipeline targeting defence primes, system integrators and sub-prime contractors
Develop and execute strategic prospecting and territory development plans
Lead complex consultative sales cycles from early engagement through to contract award
Develop tailored proposals and competitive bids in collaboration with engineering teams
Build long-term relationships with defence procurement stakeholders and programme teams
Represent the organisation at defence trade shows, industry forums and networking events
Maintain accurate CRM records and provide structured forecasting and pipeline reporting
Secure high-value contracts for customised computing and embedded technology solutions
Requirements of the Senior Business Development Manager - Defence (Canada - Remote):
Provable and Extensive experience in business development or technical sales
Significant experience selling into defence markets
Proven track record of winning new business and securing large strategic contracts
Experience navigating defence procurement environments and engaging with defence primes
Strong consultative sales approach with the ability to position customised technology solutions
Experience working with engineering teams to develop technical proposals and bids
Excellent communication, negotiation and presentation skills
Entrepreneurial mindset with the ability to build a territory from the ground up
Background in electronics, embedded computing, defence systems or industrial computing desirable
Working Pattern & Benefits:
Full-time remote role based in Canada
Travel across Canada as required for customer meetings and industry events
Opportunity to join a growing North American business with significant defence market opportunity
Entrepreneurial environment with strong potential for career progression as the sales organisation scales
To apply for this Senior Business Development Manager - Defence role, please send your CV to Kishan Chandarana: kchandarana@redlinegroup.Com
01582 878 830 ....Read more...
Type: Permanent Location: Canada
Start: ASAP
Posted: 2026-05-09 23:00:02
-
Business Development Manager - Electronic Components (Passive & RF)
Location: UK Remote - Based Midlands or above (regular UK travel)
An exciting opportunity has arisen for a Business Development Manager - Electronic Components (Passive & RF) to join a well-established UK specialist distributor and manufacturer supplying high-reliability electronic components into demanding markets.
This full-time, permanent role offers UK remote working (Midlands or further north) with regular travel to customer sites across the UK.
This role is ideally suited to a commercially driven sales professional with a strong background in B2B technical sales, particularly within passive components, RF, power, interconnect or electromechanical technologies, who enjoys developing new customer relationships and driving sustainable revenue growth.
Main Responsibilities of the Business Development Manager - Electronic Components (UK Remote - Midlands or above):
Identify, develop and secure new business opportunities with OEMs, CEMs and Tier 1 contractors across the UK
Sell and promote passive components, RF components and related high-reliability electronic technologies
Research and target new markets, applications and customers aligned to distribution and manufacturing capabilities
Proactively generate and qualify leads through cold outreach, networking and industry events
Arrange and attend customer meetings, product presentations and technical discussions
Manage and maintain a robust sales pipeline with accurate forecasting and reporting
Work closely with internal sales, product management and engineering teams to deliver tailored solutions
Provide regular sales activity updates, KPIs and performance reports to senior management
Requirements of the Business Development Manager - Electronic Components (UK Remote - Midlands or above):
Proven experience in B2B business development or technical sales within the electronic components sector
Demonstrable experience selling passive components, RF components, power or electromechanical products
Strong communication and presentation skills with the ability to engage technical and commercial stakeholders
Ability to work independently and manage a regional sales territory effectively
Strong commercial awareness with experience negotiating and closing complex sales opportunities
Full UK driving licence and willingness to travel regularly to customer sites
Experience selling into defence, aerospace, rail, industrial or other high-reliability markets is advantageous
Technical background in electronics, electrical engineering or a related discipline is beneficial
Working Pattern & Benefits:
Full-time, permanent role
UK remote working (Midlands or above) with regular UK-wide travel
Competitive base salary with performance-related commission
Pension scheme and additional benefits
Opportunity to join a respected UK organisation with a strong technical reputation and long-term customer relationships
To apply for this Business Development Manager - Electronic Components role, please send your CV to Kishan Chandarana:
Kchandarana@redlinegroup.Com
01582 878 830 ....Read more...
Type: Permanent Location: Wales
Start: ASAP
Salary / Rate: £50000 - £60000 per annum
Posted: 2026-05-09 23:00:02
-
Senior Electronics & Software Product Engineer
Location: Cambridge, Cambridgeshire
An exciting opportunity has arisen for a Senior Electronics & Software Product Engineer to join a well-established UK technology consultancy specialising in the development of innovative products for regulated and safety-critical markets, including medical devices and advanced electromechanical systems.
This role is ideal for an experienced electronics and embedded software engineer who has successfully delivered multiple product development programmes and is looking to take on increased technical responsibility while remaining hands-on within a collaborative engineering environment.
Main Responsibilities of the Senior Electronics & Software Product Engineer (Cambridge):
Design and develop electronic circuits and embedded software for complex new products.
Integrate electronics, software, and electromechanical design through to manufacture.
Deliver structured technical progress updates to customers and internal stakeholders.
Support products through the full development lifecycle, from concept to production planning.
Contribute to project leadership activities and multidisciplinary engineering teams.
Assist, over time, with developing new technical opportunities into commercial programmes.
Requirements of the Senior Electronics & Software Product Engineer (Cambridge):
Proven industry experience in electronic circuit design and embedded software development.
Strong communication skills, including written, verbal, and presentation abilities.
First-class or 2:1 degree in Engineering or a related discipline.
Ability to work independently while contributing effectively within a team environment.
Eligibility to work in the UK (no sponsorship available).
Desirable Experience:
Experience delivering products from concept through to manufacture.
Background in regulated or safety-critical product development.
Exposure to project leadership or technical team coordination.
Interest in supporting customer engagement or business development activities.
To apply for this Senior Electronics & Software Product Engineer role, please send your CV to:
Kchandarana@redlinegroup.Com
01582 878 830 ....Read more...
Type: Permanent Location: Cambridge, England
Start: ASAP
Salary / Rate: £60000 - £80000 per annum
Posted: 2026-05-09 23:00:02
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Junior Mechanical Engineer provides engineering support to the program and/or area to ensure the product is processed in accordance with customer and division quality requirements while maintaining production flow.
Charged with assisting with the development and maintenance of systems to ensure that all products manufactured by the plant meet customer specifications and achieve superior reliability levels.
Responsible for investigating and implementing new process technology at the plant.
The Junior Mechanical Engineer is responsible for maintaining, upgrading, and optimizing the plant.
This position is responsible for influencing the development of preventative maintenance programs at the facility, assisting in work area design, plant layout, visual control, metric implementation, material flow, process tracking, and communication.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Analyze statistical data and product specifications to determine standards and establish quality and reliability objectives of the finished product.
Participate in plant metric reporting.
Coordinate quality control objectives and activities as detailed in the facility site plan to resolve any production problems that may occur, maximize product consistency, and minimize cost.
Design measurement and control systems for chemical plants based on data collected in laboratory experiments and in pilot plant operations.
Use SAP to monitor production/business functions.
Provides engineering support for all operations in the plant.
Recommend modifications to current processes and equipment; document and follow up with engineers responsible for the modifications.
Works with the plant engineers, maintenance, and facilities to influence the direction of preventative maintenance best practices.
Support a high-performance results-oriented culture and maintain high standards of safety and compliance.
Provide technical and operational leadership for equipment and facility maintenance and improvements.
Deliver disciplined project management and product development assistance.
Regular review of batch first pass yield, production quality, distressed, obsolete, scrap, and returned material.
Troubleshoot and implement repeatability best practices.
Support investigations on equipment failures, difficulties, and deficiencies.
Interface with leadership, operators, and maintenance to ensure continuous improvement and continuous production.
Assist in the Collection of site metrics and KPI's Implementation and continued support of PIE.
Perform a job in accordance with all Tremco safety policies and procedures.
Perform other duties, as assigned.
EDUCATION & EXPERIENCE REQUIREMENT:
Bachelor's degree (B.
S.) in mechanical or electrical engineering preferred.
Previous experience in a manufacturing environment preferred.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
Compensation will be commensurate with the applicant's relevant experience.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2026-05-09 22:25:33
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Junior Mechanical Engineer provides engineering support to the program and/or area to ensure the product is processed in accordance with customer and division quality requirements while maintaining production flow.
Charged with assisting with the development and maintenance of systems to ensure that all products manufactured by the plant meet customer specifications and achieve superior reliability levels.
Responsible for investigating and implementing new process technology at the plant.
The Junior Mechanical Engineer is responsible for maintaining, upgrading, and optimizing the plant.
This position is responsible for influencing the development of preventative maintenance programs at the facility, assisting in work area design, plant layout, visual control, metric implementation, material flow, process tracking, and communication.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Analyze statistical data and product specifications to determine standards and establish quality and reliability objectives of the finished product.
Participate in plant metric reporting.
Coordinate quality control objectives and activities as detailed in the facility site plan to resolve any production problems that may occur, maximize product consistency, and minimize cost.
Design measurement and control systems for chemical plants based on data collected in laboratory experiments and in pilot plant operations.
Use SAP to monitor production/business functions.
Provides engineering support for all operations in the plant.
Recommend modifications to current processes and equipment; document and follow up with engineers responsible for the modifications.
Works with the plant engineers, maintenance, and facilities to influence the direction of preventative maintenance best practices.
Support a high-performance results-oriented culture and maintain high standards of safety and compliance.
Provide technical and operational leadership for equipment and facility maintenance and improvements.
Deliver disciplined project management and product development assistance.
Regular review of batch first pass yield, production quality, distressed, obsolete, scrap, and returned material.
Troubleshoot and implement repeatability best practices.
Support investigations on equipment failures, difficulties, and deficiencies.
Interface with leadership, operators, and maintenance to ensure continuous improvement and continuous production.
Assist in the Collection of site metrics and KPI's Implementation and continued support of PIE.
Perform a job in accordance with all Tremco safety policies and procedures.
Perform other duties, as assigned.
EDUCATION & EXPERIENCE REQUIREMENT:
Bachelor's degree (B.
S.) in mechanical or electrical engineering preferred.
Previous experience in a manufacturing environment preferred.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
Compensation will be commensurate with the applicant's relevant experience.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2026-05-09 22:10:30
-
An exciting opportunity to join a high-performing aerospace engineering team developing state-of-the-art Full Flight Simulators (Level D) used by leading aviation organisations worldwide.
We are hiring across multiple disciplines, offering the chance to work on high-fidelity simulation systems that replicate real aircraft behaviour and directly contribute to pilot training and aviation safety.
Opportunities Available
- C / Software Engineers (Real-Time Systems)
- Sound Systems Engineers (Audio & Acoustics)
- Aircraft Systems & Avionics Engineers
- Environment & Communications Simulation Engineers
- Visual Systems Engineers
- Vendor Software / Integration Engineers
What Youll Be Doing
- Develop and integrate real-time simulation software and systems
- Work across the full engineering lifecycle requirements, design, integration, verification & validation, and certification
- Model and simulate aircraft systems, avionics, environment, and visual/audio behaviour
- Support system integration, testing, fault finding, and performance optimisation
- Collaborate with multidisciplinary teams across software, systems, hardware, and simulation
- Contribute to customer delivery, qualification, and post-delivery support
What Were Looking For
- Experience in aerospace, automotive, or other safety-critical environments
- Strong understanding of systems engineering principles / development lifecycle
- Experience in one or more of the following:
- C / C++ / Python software development
- Real-time or embedded systems
- Aircraft systems, avionics, or simulation modelling
- Audio systems, acoustics, or signal processing
- Visual systems, rendering, or simulation environments
- System integration and complex engineering environments
- Strong problem-solving skills and a collaborative mindset
- Degree in a relevant engineering or technical discipline (or equivalent experience)
Desirable Experience
- Flight simulation or Level D simulator environments
- Knowledge of ARINC, AFDX, CAN, or aviation data protocols
- Experience with MATLAB/Simulink or similar tools
- Familiarity with EASA / FAA simulation or certification standards
- Experience with real-time systems, networking, or hardware integration
Why Apply?
- Work on cutting-edge flight simulation technology used globally
- Be part of a collaborative, multidisciplinary engineering environment
- Gain exposure to complex, safety-critical aerospace systems
- Strong opportunities for career development and progression
- Competitive salary and comprehensive benefits package
Please note: Candidates must have the right to work in the UK.
If youre passionate about simulation, aerospace systems, or real-time engineering, this is a fantastic opportunity to work on technology that truly makes an impact.
TT ....Read more...
Type: Permanent Location: West Sussex,England
Start: 09/05/2026
Salary / Rate: Competitive
Posted: 2026-05-09 09:45:05
-
Junior Electronics Engineer
Location: Lincoln, Lincolnshire
An opportunity has arisen for a Junior Electronics Engineer to join a highly specialised engineering organisation developing advanced RF and antenna technologies.
The company is expanding its R&D capability in Lincoln and is building a small, high-performance technical team focused on solving complex electromagnetic and RF system challenges.
This role is suited to a recently qualified or early-career engineer with a strong grounding in electromagnetics or microwave engineering who is eager to work on technically demanding projects in a fast-paced development environment.
Main Responsibilities of the Junior Electronics Engineer (Lincoln):
Support the design and development of antenna systems across HF to SHF frequencies
Perform electromagnetic simulation and optimisation of antenna structures
Assist in RF circuit design including filters, amplifiers, and switching networks
Contribute to PCB layout and detailed design activities
Build, modify, and test RF and antenna prototypes
Conduct antenna measurements and support validation activities
Assist with mixed-signal and system-level development tasks
Support modelling and performance analysis (e.G.
MATLAB or similar tools)
Prepare clear technical documentation and test reports
Assist with production handover and early-stage manufacturing support
Support fault finding and root-cause investigations
Requirements of the Junior Electronics Engineer (Lincoln):
MUST HOLD BRITISH PASSPORT
Bachelor's degree in Electronic Engineering or closely related discipline (Master's advantageous)
Academic or industry experience in electromagnetics or RF/microwave engineering
Strong understanding of electromagnetic theory, physics, and applied mathematics
Familiarity with simulation tools such as CST, HFSS, FEKO, Microwave Office, ADS or similar
Exposure to PCB design tools (Altium, Eagle or similar) desirable
Hands-on practical ability including soldering, prototype construction, and use of RF test equipment
Strong analytical and problem-solving skills
Clear written and verbal communication ability
High attention to detail and ability to meet project deadlines
Eligibility to work in the UK
Working Pattern & Benefits:
Full-time, permanent role
Onsite role based in Lincoln with collaborative R&D environment
Exposure to complex RF and antenna system development
Strong opportunity for technical growth and progression
To apply for this Junior Antenna & RF Design Engineer role, please send your CV to Kishan Chandarana:
Kchandarana@redlinegroup.Com
01582 878 830 ....Read more...
Type: Permanent Location: Lincolnshire, England
Start: ASAP
Salary / Rate: £27500 - £35000 per annum
Posted: 2026-05-08 23:00:12
-
Principal Electronics & Software Product Engineer
Location: Cambridge, Cambridgeshire
An exciting opportunity has arisen for a Principal Electronics & Software Product Engineer to join a specialist product design consultancy focused on developing innovative technologies for multinational clients across the medical industry.
The business has expanded its global capability while maintaining a reputation for exceptional engineering, strong project leadership, and delivery within regulated and safety-critical markets.
This role sits within a rapidly growing technical team developing complex electromechanical products from concept through to manufacture.
This position is ideal for an experienced electronics or electromechanical product development engineer looking to step into a principal-level role, lead multidisciplinary teams, and take ownership of full product architectures while contributing to business growth and client development.
Main Responsibilities of the Principal Electronics & Software Product Engineer (Cambridge):
Develop electronics and embedded software (C/C++) for diverse and technically complex new products
Lead the integration of electromechanical product designs through to manufacture and production transfer
Take technical ownership of product architecture from concept generation through to launch
Deliver technical progress to clients and, over time, lead multidisciplinary project teams
Contribute to requirements definition, specification development, schematic capture, PCB layout, hardware bring-up, debugging, and product validation
Support project planning, resourcing, and leadership activities
Build strong client relationships and support the conversion of new opportunities into commercial contracts
Requirements of the Principal Electronics & Software Product Engineer (Cambridge):
Proven industry experience designing, prototyping, and testing electronic circuits and systems, including embedded software development in C/C++
Strong practical electronics skills including soldering, PCB rework/modification, wiring, and use of common laboratory test equipment
Experience across the electronic product development lifecycle from concept through to prototype and manufacture
Ability to work effectively within cross-disciplinary teams, with strong written, verbal, and presentation skills
A First or 2:1 degree in Engineering from a leading university (UK top 10 or equivalent)
Eligibility to work in the UK (visa sponsorship not available)
Experience in project planning, leadership, or team coordination would be advantageous
Working Pattern & Benefits:
Full-time, permanent role
Competitive salary and performance-based bonus structure
Career development support including mentoring and personal training budgets
Opportunity to work on innovative, safety-critical products in regulated international markets
Exposure to multinational clients and potential travel opportunities
Ethical working environment focused on improving lives through engineering excellence
To apply for this Principal Electronics & Software Product Engineer role, please send your CV to Kishan Chandarana:
Kchandarana@redlinegroup.Com
01582 878 830 ....Read more...
Type: Permanent Location: Cambridge, England
Start: ASAP
Salary / Rate: £75000 - £90000 per annum
Posted: 2026-05-08 23:00:12
-
We are seeking a Maintenance Engineer to join a leading manufacturer based in the Arnold area of Nottingham, working days Monday to Friday 8am-4:30pm.The salary being offered to the Maintenance Engineer is £42,500, with an opportunity to earn an additional £5k.
The role comes with fantastic company benefits, pension match of up to 10%, and job security working for a market leader, that values its employees.With accredited cross skilling, continuous upskilling, and clear career progression pathways, this is a role that offers long term stability, standout benefits, and exceptional earning potential.What's on offer as a Mechanical Maintenance Engineer
Basic Salary: £42,500
Opportunity to earn an additional £5k, in access of £47,500
Working days Monday to Friday 8am-4:30pm
Pension matched up to 10%
KPI Bonus
Location near Arnold with excellent transport links
Training & Development
Role & Responsibilities as a Mechanical Maintenance Engineer
Deliver plant-wide proactive and reactive mechanical maintenance to ensure optimum factory performance
Execute PPM schedules and respond effectively to breakdowns as part of the maintenance team
Fault-find and repair key mechanical systems including hydraulics, pneumatics, conveyors, and gearboxes
Participate in continuous improvement and reliability initiatives to support world-class manufacturing standards
What do you require to apply as a Mechanical Maintenance Engineer
City & Guilds Level 3 / BTEC Level 3 (or higher) with NVQ Level 3 in engineering
Apprenticeship trained in Mechanical Engineering, Mechatronics, or related discipline
Strong background in planned and reactive mechanical maintenance within manufacturing
To apply for the Mechanical Engineering position, please click "Apply Now" and attach your most up to date CV. ....Read more...
Type: Permanent Location: Nottingham, England
Start: ASAP
Salary / Rate: Up to £42500.00 per annum + Excellent Benefits
Posted: 2026-05-08 15:55:44
-
Our client is an international market-leading manufacturing business, that has recently undergone a multi-million-pound capex investment across their manufacturing facility, with further investment planned this year, and beyond.
They are now seeking an Reliability Engineer to take their maintenance capabilities to the next level, close to the Buxton area.
This is an exciting opportunity where you will manage all aspects of the reliability Engineering with a large team.What's in it for you as a Reliability Engineer?
A Salary of upto £55,000
8% Bonus
Monday - Friday Days based position (8am-4pm)
Location - Buxton (Commutable from Maccesfield, Buxton, Chapel-en-le-Frith)
Comprehensive Company Pension
Development opportunities
Employee benefits program
In the role of Reliability Engineer you will be responsible for:
Measuring and monitoring equipment condition, analysing trends and identifying the needs of rectification work for the maintenance team.
Ownership of work order creation, ensuring the correct priorities for repairs or further inspections.
These are to be carried out in an efficient and timely manner.
Continuously improving the inspection process and job plans using new technologies and OEM data where available.
Maintaining in depth knowledge of the condition of all plant equipment on a continuous basis.
Evaluating and improving the preventive maintenance job plans, creating and updating the corresponding inspection job plans.
Skills and Qualifications needed at a Reliability Engineer;
Mechanical qualification such as modern apprenticeship to HNC level or other relevant qualifications
Heavy Industry background
Strong understanding of equipment safety isolation procedures.
Strong interpersonal skills with an ability to clearly communicate maintenance priorities.
Strong understanding of plant operating principles.
Maintenance or inspection experience within cement or similar process industry is essential.
Self-motivated individual with an ability to assess business critical risks.
IT literacy (MS Office) with knowledge of SAP or similar CMMS.
This position would suit Multi-Skilled Engineer, Reliability Engineer, Mechanical Engineer, Electrical Engineer ....Read more...
Type: Permanent Location: Buxton, England
Start: ASAP
Salary / Rate: Up to £55000.00 per annum
Posted: 2026-05-08 15:45:37
-
This Mechanical Maintenance Engineer role is working with one of the UK's largest manufacturing organisations and offers a fantastic salary of £51,000 plus KPI bonus of 5%, excellent industry benefits, pension match to 10% and leading career development opportunities' premium overtime, a market leading double figure pension and a modern, fully invested engineering site built for high performance, located near Arnold, Nottingham.
What's on offer as a Mechanical Maintenance Engineer
Basic Salary: £51,000 + bonus
Premium overtime x1.5, x2
Pension matched up to 10%
4 on 4 off working pattern - days/nights
Location near Aldridge with excellent transport links
Private healthcare scheme
Training & Development
Role & Responsibilities as a Mechanical Maintenance Engineer
Deliver plant-wide proactive and reactive mechanical maintenance to ensure optimum factory performance
Execute PPM schedules and respond effectively to breakdowns as part of the maintenance team
Fault-find and repair key mechanical systems including hydraulics, pneumatics, conveyors, and gearboxes
Participate in continuous improvement and reliability initiatives to support world-class manufacturing standards
What do you require to apply as a Mechanical Maintenance Engineer
City & Guilds Level 3 / BTEC Level 3 (or higher) with NVQ Level 3 in engineering
Apprenticeship trained in Engineering, Mechanical, Mechatronics or related discipline such as an NVQ Level 3 with a HNC/HND
Strong background in planned and reactive mechanical maintenance within manufacturing
To apply for the Mechanical Maintenance Engineer position, please click "Apply Now" ....Read more...
Type: Permanent Location: Nottingham, England
Start: ASAP
Salary / Rate: Up to £51000 per annum
Posted: 2026-05-08 15:44:47
-
We are looking for a Senior Radar Systems Engineer to join a team developing advanced radar systems.
You will model, design, and analyse radar and related systems, support hardware and software development, and develop digital signal processing algorithms.
Key Requirements
Bachelor or Master degree in Engineering, Physics, or Mathematics.
Experience with MATLAB and digital signal processing.
Knowledge of radar or related technologies ( sonar, image processing, communications).
Strong team player with good written and verbal communication.
Willingness to travel in the UK and overseas.
Desirable
Radar concepts Pulse Compression, Doppler, CFAR.
Experience with Phased Array Radar, FPGA, Linux, RF electronics.
Programming in Python, C++ and lab hardware testing experience.
....Read more...
Type: Permanent Location: North London, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £65000 Per Annum None
Posted: 2026-05-08 15:31:10
-
A Senior to Principal Electronic Design technical lead required to take ownership of the companies electronic engineering efforts, you will report directly to the CTO and be the sole internal hardware resource.
Requirements
Automotive industry experience across power supply design, test, compliance and technical requirements.
Altium to design schematic, layout and BOM design and development.
Electronics test house process, debugging, oscilloscope, soldering, hands on skills.
Radio compliance, EMC, cellular etc.
Strong degree in Electronics
You will work on data acquisition devices that are deployed internationally on heavy vehicles and across construction supply chains providing valuable time series data fed into the cloud and processed by machine learning algorithms to drive quality and efficiency decisions.
These devices are deployed internationally and include cellular, BLE, GPS and CAN technologies.
You will run research projects leveraging custom designs, lead compliance testing and direct contracted Manufacturers on production.
The role is hybrid and requires at least 2 days in the office per week. ....Read more...
Type: Permanent Location: West End, London, England
Start: ASAP
Duration: Permanent
Salary / Rate: £58000 - £75000 Per Annum None
Posted: 2026-05-08 15:23:47
-
We are looking for a Senior Electronics Design Engineer to join their hardware team.
This is an exceptional opportunity to take ownership as the only Electronics Engineer within the business, leading hardware development from concept through to production.
You will play a key role in product development, compliance, and manufacturing collaboration, working closely with Contract Manufacturers to ensure high-quality builds and successful certification.
Key Responsibilities
Lead electronic hardware design and development
Design schematics, PCB layouts, and prepare Bills of Materials (BOM)
Conduct circuit design and simulation
Develop and debug hardware using oscilloscopes and lab equipment
Lead compliance and radio certification testing
Support automotive power supply design and validation
Required Skills
Strong degree in Electronics or Electronics Engineering
Expert user of Altium (schematic capture, PCB layout, BOM preparation)
Strong background in Circuit Design, Microcontrollers, Printed Circuit Board (PCB) Design, Schematic Capture
Hands-on electronics experience (debugging, soldering, oscilloscope usage)
Experience taking a product through radio compliance
Experience with automotive power supply design and testing requirements
It's a hybrid role, 2 days a week in London ....Read more...
Type: Permanent Location: central London, England
Start: ASAP
Duration: Permanent
Salary / Rate: £55000 - £70000 Per Annum None
Posted: 2026-05-08 15:20:40
-
Quality Assurance Manager
Are you an experienced, hands-on Quality Assurance professional with a strong background leading quality activities within an engineering environment?
My client, based in Fareham, specialises in the development of bespoke hardware and firmware silicon devices used across the automotive and industrial sectors.
They are looking for a Quality Assurance Manager to take full ownership of quality across the business and lead customer investigations through to resolution.
Key responsibilities for this Quality Assurance Manager based in Fareham:
Act as the sole QA lead across the business, owning all quality-related activity
Maintain the QMS and ISO9001 accreditation, including audit preparation and compliance activities
Lead customer quality investigations from cradle to grave, ensuring timely and effective resolution
Raise RMAs, coordinate inspections, liaise with factories, and gather evidence relating to defects, authenticity, and root cause analysis
Work closely with engineering teams and manufacturing partners while driving investigations and communicating findings to customers
Support supplier audits and occasional international customer visits
Take a proactive, hands-on approach with a willingness to personally drive issues through to completion
Requirements for this Quality Assurance Manager based in Fareham:
Strong experience managing ISO9001 and QMS systems
Audit preparation and compliance experience
Ability to work independently and take full ownership without relying on a wider QA team
Hands-on problem-solving mentality with strong investigative skills
Engineering or technical background preferred due to the complexity of the products and investigations
To apply for this Quality Assurance Manager opportunity based in Fareham, please send your CV to KGraveney@redlinegroup.Com or call Kyle on 01582 878817. ....Read more...
Type: Permanent Location: Fareham, England
Start: ASAP
Salary / Rate: £55000 - £65000 per annum
Posted: 2026-05-08 15:12:57
-
Maintenance Electrical, Control & Instrumentation Technician
Salary: £30-£35 per hour Location: West Yorkshire Contract Type: Contract, 1 month, full time, standard days Role: Maintenance EC&I Technician
Maintenance EC&I Technician role available! We are looking for someone to join a successful Chemical Manufacturing company.
The Maintenance Electrical Controls & Instrumentation Technician is responsible for assembly, installation, maintaining, troubleshooting, testing and fault diagnosis, repair and disassembly of a wide range of electrical plant and associated components.
This company has a great culture and is at a great site with many opportunities.
Qualifications & Skills Required for the Maintenance EC&I Technician Position:
Time-Served Apprenticeship with an NVQ Level 3 in in Engineering Maintenance, Electrical Engineering, or Maintenance & Operations Engineering Technician
Credentials: HNC/HND, ONC, or similar technical certificates in Electrical Engineering
Inspection & Testing: City & Guilds 2391 (or equivalent)
Com Ex (desirable)
Ability to read and interpret complex electrical blueprints and wiring diagrams
Responsibilities of the Maintenance EC&I Technician:
Have the required competencies to install, maintain, test and diagnose for faults and disassemble a wide range of electrical plant and associated components to the required standard while adhering to health, safety and environmental regulations and safe working practices, and considering environmental and sustainability considerations
Understand the relevant legislative, regulatory and local requirements or procedures and safe working practices, including their responsibilities with regards to reporting lines and procedures.
Understand the preparation and reinstatement requirements in respect of the work area, materials and equipment, and the possible consequences of incorrect actions in these areas.
Be able to read and interpret relevant engineering drawings, related specifications, quality standards and equipment manuals, and to follow work instructions and relevant plans and schedules
Where necessary, ensure ‘as built' drawings are updated and circulated as per organisational policy
Perform scheduled planned preventative maintenance in accordance with minimised unplanned downtime
As necessary, put forward suggestions and develop modification requests to improve plant/equipment efficiency/safety of operations.
Understand which tools and equipment to use, and when, and will follow relevant training, methods and techniques and quality control and safety procedures for their use.
Understand their responsibilities for ensuring the care and security of tools and equipment used.
Understand and work in accordance with mandatory requirements of Health, Safety and Environmental requirements
Understand types of defects and faults that can occur, how to identify them, and what action to take.
Be able to handle a range of digital information, technology and equipment to support work related tasks and to communicate information.
Undertake continuous training and development
Please apply directly for further information regarding this Maintenance EC&I Technician role or reach out to Ava Murphy at E3 recruitment.
....Read more...
Type: Permanent Location: Halifax, England
Start: ASAP
Salary / Rate: £30 - £35 per hour
Posted: 2026-05-08 14:56:51
-
Maintenance Electrical, Control & Instrumentation Technician
Salary: £45,600 Location: West Yorkshire Contract Type: Permanent, Full time, Standard days Role: Maintenance EC&I Technician
Maintenance EC&I Technician role available! We are looking for someone to join a successful Chemical Manufacturing company.
The Maintenance Electrical Controls & Instrumentation Technician is responsible for assembly, installation, maintaining, troubleshooting, testing and fault diagnosis, repair and disassembly of a wide range of electrical plant and associated components.
This company has a great culture and is at a great site with many opportunities.
Benefits:
Pension: Employer contribution up to 12%
Private Health Care
Overtime up to x1.5
25 days holiday + Bank Holidays
Qualifications & Skills Required for the Maintenance EC&I Technician Position:
Time-Served Apprenticeship with an NVQ Level 3 in in Engineering Maintenance, Electrical Engineering, or Maintenance & Operations Engineering Technician
Credentials: HNC/HND, ONC, or similar technical certificates in Electrical Engineering
Inspection & Testing: City & Guilds 2391 (or equivalent)
Com Ex (desirable)
Ability to read and interpret complex electrical blueprints and wiring diagrams
Responsibilities of the Maintenance EC&I Technician:
Have the required competencies to install, maintain, test and diagnose for faults and disassemble a wide range of electrical plant and associated components to the required standard while adhering to health, safety and environmental regulations and safe working practices, and considering environmental and sustainability considerations
Understand the relevant legislative, regulatory and local requirements or procedures and safe working practices, including their responsibilities with regards to reporting lines and procedures.
Understand the preparation and reinstatement requirements in respect of the work area, materials and equipment, and the possible consequences of incorrect actions in these areas.
Be able to read and interpret relevant engineering drawings, related specifications, quality standards and equipment manuals, and to follow work instructions and relevant plans and schedules
Where necessary, ensure ‘as built' drawings are updated and circulated as per organisational policy
Perform scheduled planned preventative maintenance in accordance with minimised unplanned downtime
As necessary, put forward suggestions and develop modification requests to improve plant/equipment efficiency/safety of operations.
Understand which tools and equipment to use, and when, and will follow relevant training, methods and techniques and quality control and safety procedures for their use.
Understand their responsibilities for ensuring the care and security of tools and equipment used.
Understand and work in accordance with mandatory requirements of Health, Safety and Environmental requirements
Understand types of defects and faults that can occur, how to identify them, and what action to take.
Be able to handle a range of digital information, technology and equipment to support work related tasks and to communicate information.
Undertake continuous training and development
Please apply directly for further information regarding this Maintenance EC&I Technician role or reach out to Ava Murphy at E3 recruitment.
....Read more...
Type: Permanent Location: Halifax, England
Start: ASAP
Salary / Rate: Up to £43000.00 per annum + £2,600 (on call allowance)
Posted: 2026-05-08 14:52:15
-
Field Service Engineer
Manchester
£35,000 - £45,000 Basic + Training + Supportive Team Environment + Job Security + Immediate Start
Join a respected leader in the water treatment industry (not sewage) as their next Field Service Engineer and become part of a genuinely supportive, people-focused company.
Enjoy the freedom to manage your own workload and take ownership of your day, while working within a close-knit team that values trust, autonomy, and long-term development.
Known for its high standards and loyal client base, this well-established organisation has built a strong reputation for delivering exceptional service and quality.
You'll work across a diverse range of projects, gaining valuable experience and continuous training in a company where engineers are truly appreciated and progression is actively encouraged.
Your role as a Field Service Engineer will include:
* Installation and commissioning of water purification systems
* Servicing and maintaining equipment at existing customer sites
* Adhering to high health and safety standards
* Liaising professionally with clients and handling technical queries
The Successful Field Service Engineer will include:
* Background as a Field Service Engineer or similar
* Experience with Water Purification / pumps / pipework / similar
* Happy to travel across the North West region
For immediate consideration, please apply now or contact Georgia Daly on 07458163040
Key Words: Water Treatment Engineer, Field Service Engineer, Reverse Osmosis, Deionisers, Water Softeners, Mechanical, Electrical, cambridge, newmarket, haverhill, ely, huntingdon, chatteris
This role is being advertised by Future Engineering Recruitment Ltd.
We operate as an employment agency.
For more opportunities, please visit our website.
Applicants must have the legal right to work in the UK.
Unfortunately, we are unable to process applications from individuals without this status. ....Read more...
Type: Permanent Location: Cambridge, England
Start: ASAP
Salary / Rate: £35000 - £45000 per annum + Autonomy + Family Feel + Package
Posted: 2026-05-08 14:38:28
-
Field Service Engineer
Manchester
£35,000 - £45,000 Basic + Training + Supportive Team Environment + Job Security + Immediate Start
Join a respected leader in the water treatment industry (not sewage) as their next Field Service Engineer and become part of a genuinely supportive, people-focused company.
Enjoy the freedom to manage your own workload and take ownership of your day, while working within a close-knit team that values trust, autonomy, and long-term development.
Known for its high standards and loyal client base, this well-established organisation has built a strong reputation for delivering exceptional service and quality.
You'll work across a diverse range of projects, gaining valuable experience and continuous training in a company where engineers are truly appreciated and progression is actively encouraged.
Your role as a Field Service Engineer will include:
* Installation and commissioning of water purification systems
* Servicing and maintaining equipment at existing customer sites
* Adhering to high health and safety standards
* Liaising professionally with clients and handling technical queries
The Successful Field Service Engineer will include:
* Background as a Field Service Engineer or similar
* Experience with Water Purification / pumps / pipework / similar
* Happy to travel across the North West region
For immediate consideration, please apply now or contact Georgia Daly on 07458163040
Key Words: Water Treatment Engineer, Field Service Engineer, Reverse Osmosis, Deionisers, Water Softeners, Mechanical, Electrical, manchester, warrington, liverpool, bolton, huddersfield
This role is being advertised by Future Engineering Recruitment Ltd.
We operate as an employment agency.
For more opportunities, please visit our website.
Applicants must have the legal right to work in the UK.
Unfortunately, we are unable to process applications from individuals without this status. ....Read more...
Type: Permanent Location: Manchester, England
Start: ASAP
Salary / Rate: £35000 - £45000 per annum + Autonomy + Progression + Package
Posted: 2026-05-08 14:28:20
-
Senior Business Development Manager - RF Electronics
Location: Anywhere in the USA (Remote)
An exciting opportunity has arisen for a Senior Business Development Manager to join a market leader in RF and antenna technology, serving the defence, telecommunications, and security sectors.
This role is ideal for a commercially driven, technically astute individual with antenna or RF electronics experience who thrives on building strong client relationships and driving business growth across North America.
Main responsibilities of the Senior Business Development Manager - RF Electronics(Remote - USA):
Develop and maintain high-level client relationships
Identify and pursue new business opportunities
Manage the full sales lifecycle including quoting, closing, and post-sales support
Track market trends and competitor activity
Lead regular sales meetings and utilise CRM tools for forecasting and reporting
Collaborate with engineering and product teams to deliver best-fit solutions
Represent the business at client sites and industry events
Requirements of the Senior Business Development Manager - RF Electronics (Remote - USA):
Bachelor's degree in Engineering, Business or related field
Proven sales experience in antennas or RF-related systems
Proven success in the defence, aerospace, or telecom markets
Proficiency with CRM systems and Microsoft Office tools
Excellent communication, presentation, and negotiation skills
Must be based in the USA
This is a fantastic opportunity to join a high-growth, forward-thinking organisation with a strong reputation for technical excellence.
You'll play a key role in expanding their market presence while working independently with the support of a collaborative global team.
To apply for this Senior Business Development Manager role based in the USA, please send your CV to:
Kchandarana@redlinegroup.com
Or call 01582 878 830 / 07961 158 784 ....Read more...
Type: Permanent Location: USA
Start: ASAP
Salary / Rate: US$120000 - US$150000 per annum
Posted: 2026-05-08 14:01:48
