-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and offers constructive criticisms relative to variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Consult with Main Lab chemist on products more than 10% out of product specifications Upon approval of product record data onto Quality Control car and enter information into computer data base Consult QC manual for specific requirements for product analysis of production batches and customers special requirements Calibrate QC equipment as required Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude. Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2025-11-15 14:08:45
-
JOB DESCRIPTION
GENERAL SUMMARY
Assist with operating filling line and box completed product.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Maintain supplies for filling line, such as empty cans, boxes, etc. Assist operator in changing filing line components from run to run Check application of lids on containers and manually tighten any loose lids Print and apply labeling to filled boxes Box and palletize finished product Complete tracking forms and attach to pallets Move completed pallets to shipping staging areas
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
No experience necessary Fill off experience preferred
Specific Knowledge, Skills, and Abilities Required
Basic math/ measurement skills Basic reading and comprehension skills Reasoning Ability
Determine correct processes regarding standard filling line procedures as instructed in initial training and from batch ticket instructions. Work without continuous supervision and complete assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the essential functions of this job the employee is regularly required to stand, bend and/or stoop, grasp, handle or feel.
The employee is occasionally required to walk, talk and/or hear.
The employee must regularly lift and/or move up to 50 pounds.
Employees must also be able to read and comprehend written instructions and remember processes and procedures for safe and accurate completion of duties for the entirety of the shift.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
KEY PERFORMANCE INDICATORS (KPI)
Number of units produced daily Accuracy of units produced Appearance of work area Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2025-11-15 14:08:45
-
JOB DESCRIPTION
Seeking several motivated technicians to help support our mission of "healthy buildings, healthy people" - all levels of experience will be considered.
We offer paid training and opportunities for rapid career progression for those interested in management opportunities.
Technicians will be responsible for the cleaning, sanitizing, and restoring commercial HVAC systems (to include duct cleaning, coil cleaning/steaming, protective coatings, etc.).
If you have experience or vocational training in the commercial construction and/or HVAC industry, contact us for an immediate interview.
If you don't have experience but are interested in career growth and learning a new trade, please apply.
We offer world class, industry leading, benefits and opportunities for advancement. Benefits include: 401k with company match Comprehensive medical/dental Earned Paid time off Paid training and continuing education Life insurance Company Pension Plan Employee Assistance Program Company paid travel, lodging and per diem.
It's a plus if you have a valid driver's license.
Generous sign-on and referral bonuses are available! The hourly rate for applicants in this position generally ranges between $17.75 and $26.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Nashville, Tennessee
Posted: 2025-11-15 14:08:45
-
Dentist Jobs in Christchurch, New Zealand.
High-specification purpose-built clinic, full books, high earnings.
ZEST Dental Recruitment working in partnership with an established private dental practice is seeking to recruit a Dentist.
Private / Independent Dental Practice
Dentist
Christchurch, New Zealand
High-specification purpose-built clinic
Full books, high earnings
Immigration Accredited Employer / Visa Approved
Reference: DW6645
An exciting opportunity has arisen for an experienced general dentist to join a well-established and modern practice in the heart of Christchurch.
With a steady flow of new patients and a supportive, professional environment, this is the perfect role for a motivated dentist looking to build a successful and rewarding career.
About the Practice and the Role:
The practice is a well-established 5-surgery facility located in a central, easily accessible area of Christchurch.
Dentists at the practice benefit from guaranteed full books, with hundreds of new patients joining the practice each month.
The premises are purpose-built, offering a modern, comfortable working environment, equipped with OPG and digital X-rays.
The practice has a low staff turnover, ensuring a stable and collaborative team culture.
Working hours are typically Monday to Friday, 8 am to 4 pm, though flexibility is available for the right candidate.
There are also opportunities to work late nights and weekends if preferred.
Remuneration is set at a competitive 45% commission-based structure.
About the Ideal Candidate:
The practice is looking for a dentist with the following qualities:
At least 3 years of clinical experience in a similar general dentistry role.
Strong interpersonal skills, with an excellent patient manner and the ability to build rapport with patients.
A track record of being a consistent performer, demonstrating reliable clinical outcomes and steady invoicing.
Experience with root canal therapy is advantageous.
Any specialist interests in areas such as Endodontics, Oral Surgery, or Periodontics would be beneficial.
A positive, professional attitude with a proactive approach to supporting and promoting the practice's values and philosophy.
Strong time management skills to ensure a smooth and efficient daily schedule.
Proficient communication skills, both with patients and colleagues, to foster teamwork and collaboration.
Experience using Microsoft Office and Practice Management Software (PMS).
The ideal candidate will be looking for a medium to long-term role, where they can grow professionally and contribute to the ongoing success of the practice.
Relocate to Christchurch!
Christchurch, the largest city on New Zealand's South Island, offers a vibrant lifestyle and a welcoming community.
Known as the "Garden City" for its lush parks and green spaces, Christchurch blends modern amenities with easy access to outdoor adventures, from hiking and cycling to skiing in nearby mountain ranges.
The city boasts a thriving arts scene, an affordable cost of living, and a high standard of education and healthcare, making it a perfect destination for professionals looking to relocate and establish a rewarding career.
Whether enjoying the city's diverse restaurants and cafes or exploring the natural beauty of the surrounding region, Christchurch offers the ideal balance of professional opportunities and quality of life.
For a motivated dentist looking to thrive in a supportive and growing practice, this is an exciting opportunity to take the next step in their career.
Successful candidates will be DCNZ registered or have qualified from New Zealand, Australia, the UK, or Ireland.
If you are not already DCNZ registered, or not qualified from one of the above countries, please check with DCNZ to check your eligibility.
For further information regarding this position, confidential enquiries can be made by submitting your CV to ZEST Dental.
Zest Dental has been helping dentists and dental practices in New Zealand, Australia, the UK, and throughout the World to find their perfect job match since 2006.
Contact: Darran WalentaEmail: Telephone: UK: +44 114 238 1729 | AU: +61 730 534 271 ....Read more...
Type: Permanent Location: Christchurch Central, Christchurch, New Zealand
Salary / Rate: £80000 - £120000 per annum + Visa, high earnings, high-spec
Posted: 2025-11-15 11:00:55
-
Nurse or Physiotherapist Pressure Care / Wound Care Specialist Are you an experienced Nurse or Physiotherapist with expertise in pressure care and/or wound management? Were recruiting on behalf of a leading medical device company looking for a clinical professional to join their team and support patients and healthcare professionals across the northern region.
The Role: Provide clinical education, product training, and support on advanced pressure care and wound care solutions.
Work closely with nurses, tissue viability teams, and community healthcare professionals to improve patient outcomes.
Conduct product trials, evaluations, and deliver in-service training sessions.
Act as a key clinical contact, ensuring best practice in the use of pressure area care equipment and wound management systems.
The Candidate: Registered Nurse (RGN) or Physiotherapist with active registration (NMC or HCPC).
Experience in pressure ulcer prevention, tissue viability, or wound care.
Strong clinical communication and presentation skills.
Ability to work autonomously and build strong relationships with clinical stakeholders.
Full clean UK driving licence Whats on Offer: Excellent salary and benefits package.
Full product training and ongoing professional development.
Opportunity to join a respected healthcare company making a real difference to patient care.
If youre passionate about clinical education and want to use your expertise in a rewarding commercial role, wed love to hear from you.
....Read more...
Type: Permanent Location: Leeds, England
Salary / Rate: Car Allowance, 20% bonus
Posted: 2025-11-14 17:20:45
-
The Company:
Leading medical devices supplier.
Business is exceeding targets.
Opportunities for career advancement.
Supportive culture, a fun place to work.
Invest in their staff.
Benefits of the Clinical Applications Specialist:
£45k basic salary + company related bonus (Approx £5k)
Fully expensed company vehicle
Lunch allowance
Employee Assistance Program
Pension, Life assurance
Educational Assistance
Training academy
Enhanced annual and life leave?
Engagement initiatives?
Supportive colleagues to learn from and enjoy company social outings, parties, and events
The Role of the Clinical Applications Specialist
Preform training in the use of diagnostic radiology equipment for new and existing customers
Provide internal training for sales team members when in the pursuit of new business and post-installation clinical instruction, supporting engineers with any application-based queries
Supporting a team of 4 x territory managers, project managers and product specialists (Approx 12 in total)
Will be involved in the pre-sales of the equipment so demonstrations, clinical trials and training once the installation of the equipment has happened.
Will be nights away from home and travel around the country
Observe and responding to market trends, competitors’ activities and initiatives
Be available to travel nationally with the UK and overseas to meet with business needs - ideally based in the North as current team is based in one in the South and one in the Midlands to ensure full coverage of the UK
Ensure full company compliance with the quality standard ISO 13485-2016 and security standard ISO 27001, Health and Safety and other regulated areas of the business
The Ideal Person for the Clinical Applications Specialist
Be a qualified HHPC registered Radiographer
Previous Clinical Applications experience in a commercial environment is advantageous
A strong aptitude for customer service
Exceptional time management skills
Good working knowledge of the public and private healthcare sector
Full Clean Driving licence
Be flexible and have an enthusiastic mindset
Establish and maintain good working and interpersonal relationships
Possess a high degree of motivation
If you think the role of Clinical Applications Specialist is for you, apply now!
Consultant: David Gray
Email: davidg@otrsales.co.uk
Tel no.
0208 397 4114
Candidates must be eligible to work and live in the UK.
About On Target
At On Target, we specialise in sales, technical and commercial jobs in the Engineering, Construction, Building Services, Medical & Scientific, and Commercial & Industrial Solutions sectors, enabling our consultants to become experts in their market sector.
We place all levels of personnel, up to Director across the UK and internationally. ....Read more...
Type: Permanent Location: Manchester, Liverpool, Backburn, Leeds, Newcastle, England
Start: ASAP
Duration: Full-Time
Salary / Rate: £45000 - £45000 Per Annum Excellent Benefits
Posted: 2025-11-14 16:29:25
-
Black Country Women's Aid Let us introduce ourselves… Black Country Women's Aid (BCWA) is an established charity working across the Black Country and wider West Midlands, providing accommodation and community support services to victims of domestic abuse, sexual abuse and human trafficking.
Services range from advocacy, civil remedies, support in court, individual and group support and access to a range of therapeutic interventions.
All services are client and needs-led. The team: Advice and Guidance Team
We know the first call or conversation can be the most difficult for those living with abuse.
We also know some people just want information about how agencies can help.
BCWA is strengthening its first contact service to ensure that every victim who contacts the support centre gets the immediate help and support they need to make decisions to break free from their abuse.
Working across the Black Country, the team will receive and take referrals from individuals and agencies, assess the immediate needs of victims, provide safety advice as well as work with other agencies.
The service will encourage victims to engage in longer-term support provided by specialist advocates and collate feedback that the services always reflect the changing needs of people living with abuse.
Our integrated approach provides effective, holistic support for survivors of abuse using a trauma-informed approach.
We have a team of supportive, dedicated, self-driven individuals who empower clients to make informed choices, helping them to live a life free from abuse.
Job Role Job Title: Senior Information, Advice and Guidance Advisor/CaseholderPosition available: 1 full-time position (37.5 hours, Monday-Friday, 9 am-5 pm), based at Head Office, SandwellSalary: £29,267 - £33,281.98Closing date: 28 November 2025 Is this you?We are looking for a dedicated individual to join our dynamic front door service.
We are looking for someone who can manage a caseload, providing support to victims/survivors within a fast-paced environment.
This individual must be empathetic, approachable and have the knowledge about safeguarding around abuse, with opportunity of continued professional development within the organisation.
The Role: This role will be responsible for delivering an effective trauma-informed approach of first contact, care and support to clients who are victims/survivors of abuse.
The postholder will provide immediate high-quality information, advice and guidance to victims of domestic abuse, offering Tier 1 support (Tier 1 support is defined as no more than 5 days).
This includes an understanding of the current/ historic situation, risk assessment, victim impact and decisions on next steps.
The senior will lead in more complex circumstances, manage the webchat and other sources of communication and lead on developing resources that can be used within the team and for the benefit of victims.
Partner liaison will be essential in responding to victims.
The team will work within set targets for response and victims' outcomes.
This is a challenging role that requires a timely response to all stakeholders, excellent interpersonal skills, IT confident and efficient and organised administration.
It is from this first contact that the relationship with BCWA begins. If you are self-driven, conscientious, hardworking, with lots of ambition, we would love to hear from you. To be considered for this position, click 'apply' and you will be emailed a link to an application form, job description, and an equal ops form, plus details on how to complete your application.
CVs will not be accepted. Important information for all positions
Black Country Women's Aid is committed to safeguarding and promoting the welfare of vulnerable adults, children and young people and expects all staff and volunteers to share this commitment.
All posts are subject to the Rehabilitation of Offenders Act (Exceptions Order) 1975.
It will be necessary for an enhanced disclosure to be made to the Disclosure and Barring Service for details of any previous criminal convictions.
Occupational Requirement under Schedule 9 (part 1) of the Equality Act 2010 applies.
The post holder must be female.
Employment checks
As a responsible employer, we adhere to safer recruitment practice and all our employees are subject to the following recruitment checks:
Right to work in the UKUnder Section 8 of the Asylum and Immigration Act, we, as a responsible employer, need to ensure that we do not employ anyone illegally.
To avoid discrimination, we treat all job applicants equally.
We therefore ask all candidates selected for interview to bring original documentation to show their Right to Work in the UK.
A copy of these will be taken.
Once the successful candidate has been appointed, the unsuccessful candidates' documents will be destroyed confidentially.
You may be refused an interview if you do not bring the correct documents with you.
References
Following your interview, two employment references will be sought.
One of these should be your current or most recent employer.
If you have finished full-time education and you have no employer reference, we will accept a reference from:
, a professional from your centre of study, for instance, a teacher, lecturer or headteacher, GP or health visitor, a character reference from a person who knows you, a civil servant from a government agency, a bank manager
DBS
All positions are subject to DBS checks at the relevant level. ....Read more...
Type: Permanent Location: Sandwell, England
Start: ASAP
Salary / Rate: £29267.00 - £33281.00 per annum
Posted: 2025-11-14 16:17:44
-
Black Country Women's Aid Let us introduce ourselves… Black Country Women's Aid (BCWA) is an established charity working across the Black Country and wider West Midlands, providing accommodation and community support services to victims of domestic abuse, sexual abuse and human trafficking.
Services range from advocacy, civil remedies, support in court, individual and group support and access to a range of therapeutic interventions.
All services are client and needs-led. The team:
BCWA Modern Slavery Support Service is a specialist service providing accommodation and community support to victims of modern-day slavery and human trafficking, who have accessed the National Referral Mechanism and are supported under the Home Office national contracting arrangements.
BCWA is the lead provider of services covering the West Midlands areas and some of the bordering local authorities.
The service works in partnership with key agencies to assess risk and provide tailored support plans for service users.
BCWA support, as defined by the national contract, is to ensure that victims of modern slavery receive a safe space to live, support including financial and practical assistance and referrals to partner agencies as necessary. Job Role Job Title: Modern Slavery Outreach AdvocatePosition type: Full-time positions available (37.5 hours/Monday-Friday), based in the West MidlandsSalary: £24,315.30 - £26,917.29Closing date: 12 December 2025 Is this you?
We are looking for a highly skilled Modern Slavery Outreach Advocate with excellent communication skills, compassion and understanding of the impact of abuse and exploitation.
We are looking for an innovative candidate who has experience working with adults who have experienced trauma and abuse.
This is a great opportunity for someone who enjoys problem-solving and developing their leadership skills.
The Role: The successful candidate will provide a high-quality frontline service to both female and male victims of Modern Slavery (international human trafficking) and their children within the West Midlands area.
You will be involved in all aspects of case management, including risk assessment, needs assessment, journey planning, outcomes and case review when supporting clients through their recovery and reflection period.
If you are self-driven, conscientious, hardworking, with lots of ambition, we would love to hear from you. To be considered for this position, click 'apply' and you will be emailed a link to an application form, job description, and an equal ops form, plus details on how to complete your application.
CVs will not be accepted.
Important information for all positions
Black Country Women's Aid is committed to safeguarding and promoting the welfare of vulnerable adults, children and young people and expects all staff and volunteers to share this commitment.
All posts are subject to the Rehabilitation of Offenders Act (Exceptions Order) 1975.
It will be necessary for an enhanced disclosure to be made to the Disclosure and Barring Service for details of any previous criminal convictions.
Employment checks
As a responsible employer, we adhere to safer recruitment practice and all our employees are subject to the following recruitment checks:
Right to work in the UKUnder Section 8 of the Asylum and Immigration Act, we, as a responsible employer, need to ensure that we do not employ anyone illegally.
To avoid discrimination, we treat all job applicants equally.
We therefore ask all candidates selected for interview to bring original documentation to show their Right to Work in the UK.
A copy of these will be taken.
Once the successful candidate has been appointed, the unsuccessful candidate's documents will be destroyed confidentially.
You may be refused an interview if you do not bring the correct documents with you.
References
Following your interview, two employment references will be sought.
One of these should be your current or most recent employer.
If you have finished full-time education and you have no employer reference, we will accept a reference from:
, a professional from your centre of study, for instance, a teacher, lecturer or headteacher, GP or health visitor, a character reference from a person who knows you, a civil servant from a government agency, a bank manager
DBS
All positions are subject to DBS checks at the relevant level. ....Read more...
Type: Permanent Location: Sandwell, England
Start: ASAP
Salary / Rate: £24315.00 - £26917.00 per annum
Posted: 2025-11-14 16:15:17
-
Up to £30,000 + Great Benefits
A fantastic opportunity is now available to join a leading supplier of textile accessory brands to the business-to-business personalisation industry.As the home of four leading textile brands, each with their own unique identity and philosophy, our client has established themselves as the go-to brand for quality, innovative products in the rebrandable accessories market, with over 3000 SKUs and approximately 500 styles across their range of headwear, bags, and accessories.The successful Product Sourcing Coordinator, who is proactive and detail-focused, will support the end-to-end sourcing process across a network of 50+ factories in the Far East, helping to ensure supplier performance, compliance, and timely delivery.
This is a key position requiring excellent communication, strong organisational skills, and the ability to manage multiple priorities.
You'll work closely with internal teams, including Product Development, Merchandising, Purchasing, and Quality Control, as well as with international suppliers.Key Responsibilities:
Serve as a main point of contact for 50+ factories across the Far East.
Build and maintain strong working relationships with all suppliers.
Ensure supplier compliance with Trading Agreements and our Code of Conduct.
Contribute to supplier reviews, recognising strong performance and addressing areas for improvement.
Produce quarterly supplier performance summaries for internal team reviews.
Actively support the Critical Path Process to meet seasonal deadlines.
Assist with onboarding new suppliers, including training and documentation.
Maintain up-to-date supplier files and reference materials for internal use.
Communicate business-as-usual (BAU) standards clearly with all new suppliers.
Research and present four potential new suppliers each month to support sourcing expansion.
Contribute to supply chain mapping and visibility projects.
Collect and file CSR (Corporate Social Responsibility) reports; organise information for internal access and training.
Proactively manage delays, non-compliance, and other issues with relevant stakeholders.
Identify sourcing risks and propose solutions to improve efficiency, consistency, and cost control.
Supply accurate pricing and lead times for bespoke customer orders.
Coordinate communication between customers and suppliers through to delivery.
Review and refine special order processes to improve speed and service.
Skills & Experience:
Previous experience in sourcing, procurement, supply chain, or logistics
Strong Microsoft Excel skills
Knowledge of ethical sourcing practices and supplier compliance processes
Excellent verbal and written communication skills
Proficiency in ERP systems and supply chain software; familiarity with AI tools is an advantage
Excellent organisational and multitasking abilities with high attention to detail
GCSE-level qualifications (or equivalent) in English and Mathematics
Further education beyond GCSE level, whether academic or vocational is desirable
A CIPS (Chartered Institute of Procurement & Supply) qualification is desirable, or an interest in obtaining this qualification alongside this role.
Desirable Experience:
Understanding of international shipping, Incoterms, and customs procedures (UK & EU)
Exposure to working with Far East suppliers
Experience working to a Critical Path is an advantage
Company BenefitsBecause our client genuinely cares about their team members, they offer a fantastic range of benefits:
22 days holiday increasing with length of service
Birthday off - In addition to your annual leave
Private Healthcare Scheme
4% employer pension contributions
Life Assurance x4 annual salary to the loved one(s) you have nominated
Modern office space with free parking and free on-site electric vehicle charging points.
This is an exciting opportunity for an ambitious, highly organised Product Sourcing Coordinator to join a successful business at a time of impressive growth in an important organisational role as part of a friendly, supportive team.
A competitive, negotiable salary based on experience is on offer, in addition to an impressive employee-centred benefits package and genuine career development opportunities.
Apply now! ....Read more...
Type: Permanent Location: Bury, England
Start: ASAP
Salary / Rate: Up to £30000 per annum + Great Benefits
Posted: 2025-11-14 14:31:06
-
Commercial Electrician Middlesbrough £37,000 - £40,000 + Van + Fuel Card + Family Run + Local Patch + Limited Work Away + Christmas Closure + Work Life Balance + Additional Qualifications As a Commercial Electrician, you will enjoy a structured work-life balance, with core hours Monday to Friday and minimal callouts, giving you the flexibility to enjoy your personal time while delivering high-quality electrical services.
This role provides the chance to work across exciting commercial and industrial projects, ensuring variety and professional satisfaction in every day.Joining this team as a Commercial Electrician also means becoming part of a supportive, people-first family run company where your skills are valued and your initiative rewarded.
You will be involved in projects ranging from small installations to larger maintenance works, offering a real sense of achievement for those committed to their craft.Your Role As a Industrial Electrician Will Include:
Deliver small to medium electrical projects (£5k-£20k), including installations, remedials, and supporting project teams.
Perform EICR remedial, fixed wire testing, emergency lighting maintenance, and general maintenance in educational and public sector buildings.
Working in North Yorkshire, occasional London site work working Mon-Fri 8-4pm
The Successful industrial Electrician Will Have:
JIB Gold Qualified Electrician
Experience working on Commercial / Industrial projects
Full UK Right to work + Valid UK Driving Licence
For Immediate consideration please call Liam on: 07458143259 Key Words: Commercial Electrician, Electrical Engineer, Electrical Project Engineer, Electrical maintenance engineer, Commercial Electrician, JIB Card ....Read more...
Type: Permanent Location: Middlesbrough, England
Salary / Rate: £37000 - £40000 per annum
Posted: 2025-11-14 14:29:09
-
JOB DESCRIPTION
Typical tasks for this position include (but are not limited to) the following:
Review processing schedules or production orders to make decisions concerning inventory requirements, staffing requirements, work procedures, or duty assignments, considering budgetary limitations and time constraints.
Direct or coordinate production, processing, distribution, or marketing activities of industrial organizations.
Develop or implement production tracking or quality control systems, analyzing production, quality control, maintenance, or other operational reports, to detect production problems.
Assist in the hiring, training, evaluating, or discharging of staff or resolving personnel grievances.
Prepare and maintain production reports or personnel records.
Set and monitor product standards, examining samples of raw products or directing testing during processing, to ensure finished products are of prescribed quality.
Initiate or coordinate inventory or cost control programs.
Coordinate or recommend procedures for facility or equipment maintenance or modification, including the replacement of machines.
Responsibilities/Expectations:
Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person.
Maintain a good record of attendance and punctuality.
Learn all manual tasks performed within the department.
Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures.
Treat people with dignity and respect.
Conduct all business with integrity.
Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities.
Follow all safety procedures and company policies.
QUALIFICATIONS:
KNOWLEDGE
English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar.
Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
Administration and Management - Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources.
Customer and Personal Service - Knowledge of principles and processes for providing customer and personal services.
This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction.
Engineering and Technology - Knowledge of the practical application of engineering science and technology.
This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services.
Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
Computers and Electronics - Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming.
Education and Training - Knowledge of principles and methods for curriculum and training design, teaching and instruction for individuals and groups, and the measurement of training effects.
Skills
Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
Speaking - Talking to others to convey information effectively.
Coordination - Adjusting actions in relation to others' actions.
Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
Management of Personnel Resources - Motivating, developing, and directing people as they work, identifying the best people for the job.
Reading Comprehension - Understanding written sentences and paragraphs in work related documents.
Time Management - Managing one's own time and the time of others.
Judgment and Decision Making - Considering the relative costs and benefits of potential actions to choose the most appropriate one.
Monitoring - Monitoring/Assessing performance of yourself, other individuals, or organizations to make improvements or take corrective action.
Social Perceptiveness - Being aware of others' reactions and understanding why they react as they do.From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis.Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.
Job Type: Full-Time
Salary: $75,000 - $110,000
Shift: Monday -Thursday: 3:30PM - 2:30AM, Friday: 2-3 hours on non-mandatory Fridays to wrap up the week (if necessary)
We are currently working mandatory every other Friday until the weekend shift gets up and running
There is a shift premium for FridaysApply for this ad Online! ....Read more...
Type: Permanent Location: Brooklyn Park, Minnesota
Posted: 2025-11-14 14:10:11
-
JOB DESCRIPTION
The primary function of a Tremco Project & Compatibility Lab Technician is to manage internal testing procedures that are used to establish a compatibility matrix for all Tremco products that are subject to contact in typical construction applications.
The P&C Lab Technician will perform Project Testing and support testing functions for Decks, Below Grade Waterproofing, Sealants and Air Barriers.
These test functions include Product Comparison, Product Compatibly, ASTM Testing (potential addendums to existing standard method requirements).
The P&C Lab Technician will be required to communicate results in an organized manner and manage the flow of data through the proper channels to the proper recipients in a timely fashion
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Laboratory: 75% of time will be spent in the laboratory in constructing test samples, documenting performance and maintaining a clean working environment.
Must be familiar with a laboratory setting and safety and be able to: Test to ASTM C 1248, ASTM C 1247, ASTM C 1193, ASTM C 1135, ASTM C 1087, ASTM 794, ASTM C 793, ASTM C 719, ASTM C 679, ASTM C 679, ASTM C 661, ASTM C 639 and ASTM C 510 standard test methods. Prepare test substrates for testing using cutting equipment including band saw, table saw and wet saw. Document observations and results of standard testing in detailed test reports. Maintain organization of test articles during sample preparation, conditioning, testing and storage. Maintain cleanliness of laboratory environment and enforce laboratory hygiene plan.
Use of material testing equipment including microscope and Instron 5565. Other duties as assigned. Customer Support (External and Internal): Provide timely response on requests from internal and external customers as it relates to compatibility testing and posting of results in the database.
Develop a test schedule to provide accurate turnaround time estimates. Maintain quick and accurate written and verbal responses to technical and non-technical questions. Work with minimal dependence. Display excellent problem solving & communication skills. Provide general Technical Service phone support. Travel on a limited basis to job sites and for product application support training. Possess a team player attitude. Be self-motivated and dedicated to quality work. Other duties as assigned.
EDUCATION
Minimum HS Diploma or GED with 5 years' experience in a laboratory environment OR Bachelor's Degree in Chemistry, Biology, General Science or similar with 3-6 months of work or coursework in a laboratory environment.
EXPERIENCE
Minimum HS Diploma or GED with 5 years' experience in a laboratory environment OR Bachelor's Degree in Chemistry, Biology, General Science or similar with 3-6 months of work or coursework in a laboratory environment.
OTHER SKILLS AND ABILITIES:
Use of common construction tools such as wet saw, band saw and caulking gun. Familiar with laboratory safety and general laboratory procedures.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran statusApply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-11-14 14:10:10
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
Starting in the Felt Department or Roofing Department of the East 80th Cleveland Manufacturing Plant, the Operator will start up, troubleshoot, and operate manufacturing and production equipment safely and routinely, while achieving or exceeding standard levels of production, according to specifications.
This position can turn into a regular, full-time, union position if the employee completes the probationary period.
During the probationary period, this position will work on the 1st Shift.
If the employee successfully completes the probationary period and becomes a regular employee, the position will most likely change to 2nd or 3rd shift, depending on the Plant's needs.
3-SHIFT FACILITY:
1st Shift: 6 a.m.
to 2:30 p.m.
2nd Shift: 2 p.m.
to 10:30 p.m.
(Shift Differential of $0.75)
3rd Shift: 10 p.m.
to 6:30 a.m.
(Shift Differential of $1.00)
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Performs work safely, according to safety rules and guidelines, and follows Tremco's Escalation Policy for any safety or quality concerns.
Communicates with Team Lead and/or Supervisor during shift changes and throughout shift.
Understands and operates the HMI at the various stations along the line to keep the line operating safely and efficiently.
Monitors weight, speed, and other metrics along the line.
Operates forklift to move raw materials, load carrier, and move finished product.
Makes raw material batches in the appropriate mixer(s), according to specifications.
Performs quality control tests on the batches, per established guidelines.
Ensures proper labels are being used on the taping machine.
Fills appropriate-sized pails, drums, or totes, labels filled items, and places pails/drums on pallet.
Performs daily housekeeping/cleaning of immediate area and other surrounding areas and departments, as needed.
Performs other duties, as assigned.
EDUCATION & EXPERIENCE:
No prior education or experience required.
Previous manufacturing, warehouse, or similar industry experience preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Basic knowledge of mathematics-i.e., addition, subtraction, fractions, etc.
Ability to read, write, and comprehend simple instructions.
Forklift Certificate and operations experience preferred.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
ADDITIONAL INFORMATION:
This is a United Auto Workers (UAW) Local 70 - Union Position and Facility.
BENEFITS:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.
ABOUT US
Tremco Construction Products Group is the industry's only provider of comprehensive systems and services for all six sides of the building enclosure.
Whether new construction or restoration, commercial, residential, in-field or in-plant - structures with CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
For restoration and renovation of existing structures, Tremco CPG's six-sided solutions deliver demonstrable performance at the lowest possible life-cycle costs, and ensure peace of mind through long-term warranties and maintenance programs. Tremco CPG represents the combined power of Dryvit Systems, Nudura Inc., Willseal and Tremco Incorporated's Commercial Sealants & Waterproofing, Roofing & Building Maintenance, along with affiliates Weatherproofing Technologies (WTI) and Weatherproofing Technologies Canada.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-11-14 14:10:09
-
JOB DESCRIPTION
As a hand packager, you will be responsible for packaging and boxing a variety of abrasive sanding products.
Tasks PROFILE: Typical tasks for this position include (but are not limited to) the following: Insert abrasive products into specified package and box (if required) Inspect and examine parts for quality Ability to meet production standards Record operational data on specified forms. Responsibilities/Expectations: Communicate with supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person. Maintain a good record of attendance and punctuality. Learn all packaging tasks performed within the department. Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures. Treat people with dignity and respect. Conduct all business with integrity. Adhere to Ali Industries/Rust-Oleum corporation quality principles and participate in all departmental and company-wide quality activities. Follow all safety procedures and company policies. Essential Job Results:
1. Package abrasive products Measure of Performance % of time Following the production orders and documenting results; packaging products; communicating production issues.
Must achieve production quota for required job
70% 2. Maintains Quality Control Standards
Measure of Performance % of time Completing in-process inspection of parts; checking materials and inspecting components for flaws and non-conformance.
Continuous inspection of quality control and reporting any issues 10% 3. Maintains Safe and Clean Working Environment Measure of Performance % of time Complying with procedures, rules and regulations; completing daily and shift clean up task lists; communicating safety and processing concerns and issues with supervisor and appropriate co-workers.
Goal of zero recordable injuries and keeping the area clean and organized 10% 4. Contributes to Team Effort Measure of Performance % of time Communicating results/ concerns/ issues with supervisor and co-workers to accomplishing team goals as required.
Focus on continuous improvement.
Achieve < 2 complaints/month for shift hand-off from supervisor related to your work area and working relationships.
Maintain being in good standing with no written disciplinary corrective action.
10%
QUALIFICATIONS:
KNOWLEDGE
English language - Ability to effectively communicate, both in written and spoken. Skills Quality control analysis inspections of products Attention to detail skills
WORK ACTIVITIES
Packaging of products - using hands and arms and wrists continuously Inspecting products - inspecting materials to identify any problems or defects Performing general physical activities - performing physical activities that require continuous use of your arms, hands, and wrists throught the shift.
Handling and moving objects - using hands and arms in handling, installing, positioning, and moving materials, and manipulating things. Work Context Wear common protective or safety equipment such as safety shoes, glasses, gloves.
How much does this job require wearing common protective or safety equipment such as safety shoes, glasses, gloves? 100% of the time Spend time standing - how much does this job require standing? 50% of the time Time pressure - how often does this job require the worker to meet strict deadlines? 85% of the time Sounds, noise levels are distracting or uncomfortable - how often does this job require working exposed to sounds and noise levels that are distracting or uncomfortable? 0% of the time Spend time using your hands to handle, control, or feel objects, products, or packages - how much does this job require using your hands to handle, control, or feel objects, tools or controls? 95% of the time Job Zone Profile: Education: These occupations usually require a high school diploma or GED. Related Experience: Some previous work-related skill, knowledge, or experience is preferred, but not required.
Job Training: Employees in these occupations need anywhere from a few weeks to a month of working with experienced employees.Apply for this ad Online! ....Read more...
Type: Permanent Location: Fairborn, Ohio
Posted: 2025-11-14 14:10:02
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
Starting in the Felt Department or Roofing Department of the East 80th Cleveland Manufacturing Plant, the Operator will start up, troubleshoot, and operate manufacturing and production equipment safely and routinely, while achieving or exceeding standard levels of production, according to specifications.
This position can turn into a regular, full-time, union position if the employee completes the probationary period.
During the probationary period, this position will work on the 1st Shift.
If the employee successfully completes the probationary period and becomes a regular employee, the position will most likely change to 2nd or 3rd shift, depending on the Plant's needs.
3-SHIFT FACILITY:
1st Shift: 6 a.m.
to 2:30 p.m.
2nd Shift: 2 p.m.
to 10:30 p.m.
(Shift Differential of $0.75)
3rd Shift: 10 p.m.
to 6:30 a.m.
(Shift Differential of $1.00)
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Performs work safely, according to safety rules and guidelines, and follows Tremco's Escalation Policy for any safety or quality concerns.
Communicates with Team Lead and/or Supervisor during shift changes and throughout shift.
Understands and operates the HMI at the various stations along the line to keep the line operating safely and efficiently.
Monitors weight, speed, and other metrics along the line.
Operates forklift to move raw materials, load carrier, and move finished product.
Makes raw material batches in the appropriate mixer(s), according to specifications.
Performs quality control tests on the batches, per established guidelines.
Ensures proper labels are being used on the taping machine.
Fills appropriate-sized pails, drums, or totes, labels filled items, and places pails/drums on pallet.
Performs daily housekeeping/cleaning of immediate area and other surrounding areas and departments, as needed.
Performs other duties, as assigned.
EDUCATION & EXPERIENCE:
No prior education or experience required.
Previous manufacturing, warehouse, or similar industry experience preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Basic knowledge of mathematics-i.e., addition, subtraction, fractions, etc.
Ability to read, write, and comprehend simple instructions.
Forklift Certificate and operations experience preferred.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
ADDITIONAL INFORMATION:
This is a United Auto Workers (UAW) Local 70 - Union Position and Facility.
BENEFITS:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.
ABOUT US
Tremco Construction Products Group is the industry's only provider of comprehensive systems and services for all six sides of the building enclosure.
Whether new construction or restoration, commercial, residential, in-field or in-plant - structures with CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
For restoration and renovation of existing structures, Tremco CPG's six-sided solutions deliver demonstrable performance at the lowest possible life-cycle costs, and ensure peace of mind through long-term warranties and maintenance programs. Tremco CPG represents the combined power of Dryvit Systems, Nudura Inc., Willseal and Tremco Incorporated's Commercial Sealants & Waterproofing, Roofing & Building Maintenance, along with affiliates Weatherproofing Technologies (WTI) and Weatherproofing Technologies Canada.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-11-14 14:10:00
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
General Purpose of Job:
The Buyer Planner Jr is responsible for creation of PFR product forecast at the SKU level, the translation of the forecast into a purchase plan/schedule considering business objectives established for customer service levels, inventory investment, and factory efficiency targets.
Duties and Responsibilities:
Plans and schedules deliveries and inventory while keeping lead-time & space constraints in mind.
Procures purchased materials within parameters of lead times, eoq's, etc.
Creates purchase orders and/or converts planned orders in SAP.
Arranges for cycle counts of both raw material and finished products, as requested.
Changes delivery schedules as needed, to meet customer demand.
Enters P.O.'s and handle Distribution/Traffic aspects of direct ship trade goods from vendors to customers.
Creates & posts deliveries & P.O.'s for Total Logistics (TLOG).
Files Process Orders and Shipped Orders.
Creates and updates Product & SKU forecasts.
Interfaces with Customer Service, Shop Floor, Plant Supervisors, Managers, Technical Staff, and Purchasing personnel on production priorities & supply issues.
Formulates workarounds when necessary.
Analyzes MRP & MPS requirements & performs related planning duties.
Maintains appropriate levels of finished goods with respect to safety stock & budget levels.
Arranges for cycle counts of both raw materials & finished goods, as requested, to maintain the integrity of inventory balances.
Analyzes and maintains safety stock and lead times in SAP.
Performs other duties, as assigned.
Education:
High School Diploma required.
College Degree Preferred.
Experience:
Two to four years of related experience preferred.
Benefits:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.
Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-11-14 14:09:57
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: The Production Operator starts, troubleshoots, and operates manufacturing equipment safely.
There are three Production Operator levels (I, II, & III).
The level will be determined by experience, ability to assume various roles on the plant floor, and demonstrated ability to independently troubleshoot and problem-solve machine issues resulting in efficient cycles and minimal downtime.
The Production Operator will operate production equipment, including industrial blenders, in accordance with the established production schedule.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform work in a safe manner by following all written and verbally communicated safety rules and procedures.
Follow standard work procedures to operate and maintain assigned machine(s).
Routinely meet or exceed production output rates per standards.
Ensure product meets certain tolerances and specifications.
Perform routine inspections per quality standards.
Understand production instructions.
Maintain accurate paperwork.
Inspects equipment, structures, and materials to identify problems or defects prior to production to ensure a clean, clear and safe work environment.
Reads and follows work orders and formulas to meet production specifications and schedules.
Examines materials, ingredients, or product per quality standards.
Weighs or measures materials, ingredients, and products per requirements.
Adds and mixes raw materials according to specifications.
Transfers materials, supplies, and products between work areas.
Discharges blenders of powder when necessary.
Ensures quality and conformity of blended products to meet standards.
Ensures equipment is set-up, cleaned, sanitized, and operating properly before, after and between runs.
Completes cleaning logs and notifies quality control for hygiene testing.
Records operational and production data on specified forms/production documents.
Reports malfunctions to a supervisor and confirms proactive and routine maintenance.
Conducts on-going assessment of quality control and operational procedures.
EDUCATION REQUIREMENT:
No formal education required.
EXPERIENCE REQUIREMENT:
No experience required.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Ability to function effectively in a team setting.
Ability to multi-task while maintaining attention to detail.
Demonstrates reliability, flexibility, and dependability. Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage.
Demonstrates accepted ethical and professional business behavior.
Executes ISO authority and responsibility.
Completes and maintains all required training.
Reports suspected violations including those of a business associate.
Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 75 lbs.
BENEFITS:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2025-11-14 14:09:54
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Process Engineer II is an extension of management.
Responsibilities are broad and include safety, product quality, process control, productivity improvement, and development of a LEAN culture.
The Engineer is expected to spend a significant amount of time on the floor, lead major process equipment projects, and mentor less experienced engineers.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Assume a leadership position at the facility in partnership with the shift supervisors.
Activities include resolution and communication regarding safety issues.
Execute scheduled PHA's and JSA's.
Proactively monitor areas and remediate potential safety issues.
Use DAKOTA software as a tool for compliance and environmental, health and safety.
Use the tool to report incidents, near misses, and non-conformances.
Develop and execute upon "standard work" activities.
Assume responsibility for assigned activities on the Engineering Tier and other accountability boards.
Conduct "GEMBA Walks" daily.
Use walks as the primary means of education and communication of expectations.
Improve productivity through elimination of non-value-added activities.
Apply Engineering principles and methodologies to Improve productivity and eliminate waste.
Work to maximize equipment efficiency and quality for output.
Member of the facility QIC.
Ensure identification of root cause and subsequent prevention of future customer complaints.
Assist in the training of operators with a focus on quality critical product specifications and process parameters.
Significant experience with equipment troubleshooting and process design.
Must be capable of successfully managing major process equipment projects (>$750k) on time and on budget.
Must be capable of leading and/or supervising others in their role or in the execution of completing a project.
Mentors less experienced engineers.
EDUCATION REQUIREMENT:
B.S.
in Mechanical, Chemical, Electrical, Controls, or similar Engineering Degree.
EXPERIENCE REQUIREMENT:
Two+ years related experience and/or training.
Must have experience in both practical Process Engineering and Project Management.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Proficiency in workflow processes, value stream efficiency, and systems thinking.
Understanding process variance and the resultant effects on Quality.
Knowledge of applied statistics.
Ability to perform problem analysis utilizing problem-solving methodology.
Must be knowledgeable in the Project Management software being used.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Ashland, Ohio
Posted: 2025-11-14 14:09:54
-
JOB DESCRIPTION
Job Summary
Under the supervision of the Vice President of Retail Sales, the National Accounts Manager will be responsible for driving profitable, sustainable growth withing the automotive and general retail space.
Account focus will be primarily national accounts under the automotive banner with select specialty retail accounts where applicable.
Responsibilities will further include discovery and implementation of growth strategies and initiatives with internal and external marketing and support efforts.
Item assortment will include well-positioned automotive brands, new item creation and innovation, and specialty opportunities.
A creative mindset and strong interpersonal skills are essential to create new and develop existing relationships with key retail accounts.
Supervision Responsibility:
With the passage of time and successful placement, there could potentially be additional supervision responsibilities as placement initiatives grow and expand.
Essential Duties
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
Reasonable accommodations may be made to enable qualified individuals with a disability to perform the essential duties.
The list below is intended to be illustrative of the responsibilities of this position and is not all encompassing, nor does it constitute an employment agreement, and the duties may change at any time. Gather product, customer, and market information to aid in the process of selling product. Manage sales process and achieve revenue targets. Display or demonstrate product, using visual tools, samples or catalog, and emphasize salable features at trade shows, open houses, and sales training opportunities. Maintain customer account portfolio, including sales volume, trip and customer reports, working agreements and other tracking reports.
Create reports for business transactions and keep expense accounts. Represent manufacturer in fair and honest way Receive customer feedback and respond in an appropriate manner. Maintain constant communication with clients. Participate in product development and product improvement processes. Act as an interface between the company and the customer on pricing, product availability, product information and credit issues.
Gather and disseminate internal information regarding product improvement, process improvements, including functions like shipping, quality, competitive information, and business opportunities. Performs other related duties as assigned.
Minimum Qualifications
The requirements listed below are representative of the education, experience, certification and/or licensure required.
An equivalent combination of education and experience to perform the essential duties and meet the necessary employment standards may be considered.
Education and Experience
Bachelor's Degree in Business / Sales & Marketing / Business Management required Five years of retail sales experience required. Retail placement and marketing support experience beneficial.
Certifications
None
Employment Standards
Knowledge of Word / PowerPoint / Excel Knowledge of Customer Management Software Knowledge of Retailer Experience / Past Sales Experience Ability to pass a pre-employment background check.
Hiring Range
Between $120K - $137K annually
Benefits
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, leaves of absence, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability. Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's All job offers are contingent upon satisfactory pre-employment drug test and background screening. Apply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2025-11-14 14:09:53
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
Starting in the Felt Department or Roofing Department of the East 80th Cleveland Manufacturing Plant, the Operator will start up, troubleshoot, and operate manufacturing and production equipment safely and routinely, while achieving or exceeding standard levels of production, according to specifications.
This position can turn into a regular, full-time, union position if the employee completes the probationary period.
During the probationary period, this position will work on the 1st Shift.
If the employee successfully completes the probationary period and becomes a regular employee, the position will most likely change to 2nd or 3rd shift, depending on the Plant's needs.
3-SHIFT FACILITY:
1st Shift: 6 a.m.
to 2:30 p.m.
2nd Shift: 2 p.m.
to 10:30 p.m.
(Shift Differential of $0.75)
3rd Shift: 10 p.m.
to 6:30 a.m.
(Shift Differential of $1.00)
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Performs work safely, according to safety rules and guidelines, and follows Tremco's Escalation Policy for any safety or quality concerns.
Communicates with Team Lead and/or Supervisor during shift changes and throughout shift.
Understands and operates the HMI at the various stations along the line to keep the line operating safely and efficiently.
Monitors weight, speed, and other metrics along the line.
Operates forklift to move raw materials, load carrier, and move finished product.
Makes raw material batches in the appropriate mixer(s), according to specifications.
Performs quality control tests on the batches, per established guidelines.
Ensures proper labels are being used on the taping machine.
Fills appropriate-sized pails, drums, or totes, labels filled items, and places pails/drums on pallet.
Performs daily housekeeping/cleaning of immediate area and other surrounding areas and departments, as needed.
Performs other duties, as assigned.
EDUCATION & EXPERIENCE:
No prior education or experience required.
Previous manufacturing, warehouse, or similar industry experience preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Basic knowledge of mathematics-i.e., addition, subtraction, fractions, etc.
Ability to read, write, and comprehend simple instructions.
Forklift Certificate and operations experience preferred.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
ADDITIONAL INFORMATION:
This is a United Auto Workers (UAW) Local 70 - Union Position and Facility.
BENEFITS:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-11-14 14:09:46
-
JOB DESCRIPTION
We are seeking individuals with experience in general construction, commercial roofing, building envelope, and general labor to join our team.
$20-33/hour
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Installation of different types of roofing systems such as BUR, EPDM, Single-ply, coatings, and other forms of low-slope roofing systems Masonry & Tuckpointing Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Safe operation of tools of the trade (hand tools, power tools etc.) Follow OSHA regulations and other regulatory agencies relating to job site safety, demonstrate safe work practices. Effective communication with foremen, supervisors, and other WTI and Tremco employees
Job Requirements:
Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical Work outside in a wide variety of weather conditions and to meet the physical demands of the position, including mobility needed to complete tasks. Climbing and operating on ladders, able to handle at least 50 lbs. Experience in general construction, commercial roofing, and/or building envelope a plus! The hourly rate for applicants in this position generally ranges between $20 and $33.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
ABOUT US
Tremco Construction Products Group (CPG) brings together Tremco Incorporated's Commercial Sealants & Waterproofing and Roofing & Building Maintenance operating divisions; Dryvit Systems, Inc.; Nudura Inc.; Willseal; Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada, Inc.
Structures with Tremco CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
Six-sided solutions from Tremco CPG companies deliver demonstrable performance at the lowest possible life-cycle cost, and stop leaks before they happen through ongoing maintenance programs.
Building owners gain the peace of mind that comes with industry-leading system warranties - all from a single source platform.Apply for this ad Online! ....Read more...
Type: Permanent Location: Albuquerque, New Mexico
Posted: 2025-11-14 14:09:45
-
JOB DESCRIPTION
Typical tasks for this position include (but are not limited to) the following:
Review processing schedules or production orders to make decisions concerning inventory requirements, staffing requirements, work procedures, or duty assignments, considering budgetary limitations and time constraints.
Direct or coordinate production, processing, distribution, or marketing activities of industrial organizations.
Develop or implement production tracking or quality control systems, analyzing production, quality control, maintenance, or other operational reports, to detect production problems.
Assist in the hiring, training, evaluating, or discharging of staff or resolving personnel grievances.
Prepare and maintain production reports or personnel records.
Set and monitor product standards, examining samples of raw products or directing testing during processing, to ensure finished products are of prescribed quality.
Initiate or coordinate inventory or cost control programs.
Coordinate or recommend procedures for facility or equipment maintenance or modification, including the replacement of machines.
Responsibilities/Expectations:
Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person.
Maintain a good record of attendance and punctuality.
Learn all manual tasks performed within the department.
Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures.
Treat people with dignity and respect.
Conduct all business with integrity.
Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities.
Follow all safety procedures and company policies.
QUALIFICATIONS:
KNOWLEDGE
English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar.
Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
Administration and Management - Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources.
Customer and Personal Service - Knowledge of principles and processes for providing customer and personal services.
This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction.
Engineering and Technology - Knowledge of the practical application of engineering science and technology.
This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services.
Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
Computers and Electronics - Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming.
Education and Training - Knowledge of principles and methods for curriculum and training design, teaching and instruction for individuals and groups, and the measurement of training effects.
Skills
Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
Speaking - Talking to others to convey information effectively.
Coordination - Adjusting actions in relation to others' actions.
Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
Management of Personnel Resources - Motivating, developing, and directing people as they work, identifying the best people for the job.
Reading Comprehension - Understanding written sentences and paragraphs in work related documents.
Time Management - Managing one's own time and the time of others.
Judgment and Decision Making - Considering the relative costs and benefits of potential actions to choose the most appropriate one.
Monitoring - Monitoring/Assessing performance of yourself, other individuals, or organizations to make improvements or take corrective action.
Social Perceptiveness - Being aware of others' reactions and understanding why they react as they do.From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis.Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.
Job Type: Full-Time
Salary: $75,000 - $110,000
Shift: Monday -Thursday: 3:30PM - 2:30AM, Friday: 2-3 hours on non-mandatory Fridays to wrap up the week (if necessary)
We are currently working mandatory every other Friday until the weekend shift gets up and running
There is a shift premium for FridaysApply for this ad Online! ....Read more...
Type: Permanent Location: Brooklyn Park, Minnesota
Posted: 2025-11-14 14:09:43
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Maintenance Technician performs scheduled and unplanned plant process maintenance and repairs.
Responds to unscheduled maintenance issues as required.
Maintains parts inventories, submits purchase requisitions, and maintains equipment files.
Communicates job status as appropriate to operators, management, and other maintenance personnel.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Troubleshoots, plans, modifies, and repairs/rebuilds all types of plant equipment.
Performs basic electrical troubleshooting, repair, and construction, as required.
Tests new or repaired equipment to assure satisfactory performance.
Modifies/fabricates as required, using welder, cutting torches and various machines and tools .
Keeps equipment, maintenance shop, and job sites in a clean and orderly condition.
Works in accordance with OSHA and Tremco safety policies and procedures.
Works from ladders, lifts, elevated places, and confined spaces, as required.
Documents work completed; reports job outcome/supplies.
Daily handoff /communication with other shifts.
Details job status as appropriate to operators, management, and other maintenance personnel.
Submits requisitions for repair/replacement parts, as necessary.
Enters MRO receipts in SAP system, maintains parts inventory/shop/equipment files/records.
Lifts up to 50 lbs., as required.
Heavier parts/materials will be handled using other methods.
Works with solvents, degreasers, lubricants, and other common industrial chemicals.
Works with minimal supervision.
Directs work of others, as required (contractors, operators, etc.)
Researches equipment/facility needs, as appropriate, through manuals, files, internet, etc.
Regular hours/shifts may vary as production and maintenance coverage needs dictate.
Must have thorough knowledge of all plant equipment, machinery, and processes
Performs other job duties, as assigned.
EDUCATION:
High School Diploma required.
EXPERIENCE:
One-year certificate from college or technical school and 1-2 years' experience OR
High School Diploma and 2 years' experience.
OTHER SKILLS AND ABILITIES:
Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense.
Problem Sensitivity - The ability to tell when something is wrong or likely to go wrong.
It does not involve solving the problem, only recognizing there is a problem.
People Interaction - Ability to work with diverse groups to reach consensus regarding problems, and needed changes.
Mechanical - Knowledge of machines and tools, including their designs, uses, repair and maintenance.
Electrical - Knowledge of circuits, programmable logic controllers (PLCs), sensors, switches, including their connectivity to mechanical systems, uses, repair and troubleshooting.
BENEFITS AND COMPENSATION:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
This is a salaried non-exempt position.
The salary range for this position is $53,000 - $70,000 annually.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.
Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-11-14 14:09:43
-
JOB DESCRIPTION
We are seeking individuals with experience in general construction, commercial roofing, building envelope, and general labor to join our team.
$20-33/hour
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Installation of different types of roofing systems such as BUR, EPDM, Single-ply, coatings, and other forms of low-slope roofing systems Masonry & Tuckpointing Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Safe operation of tools of the trade (hand tools, power tools etc.) Follow OSHA regulations and other regulatory agencies relating to job site safety, demonstrate safe work practices. Effective communication with foremen, supervisors, and other WTI and Tremco employees
Job Requirements:
Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical Work outside in a wide variety of weather conditions and to meet the physical demands of the position, including mobility needed to complete tasks. Climbing and operating on ladders, able to handle at least 50 lbs. Experience in general construction, commercial roofing, and/or building envelope a plus! The hourly rate for applicants in this position generally ranges between $20 and $33.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
ABOUT US
Tremco Construction Products Group (CPG) brings together Tremco Incorporated's Commercial Sealants & Waterproofing and Roofing & Building Maintenance operating divisions; Dryvit Systems, Inc.; Nudura Inc.; Willseal; Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada, Inc.
Structures with Tremco CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
Six-sided solutions from Tremco CPG companies deliver demonstrable performance at the lowest possible life-cycle cost, and stop leaks before they happen through ongoing maintenance programs.
Building owners gain the peace of mind that comes with industry-leading system warranties - all from a single source platform.Apply for this ad Online! ....Read more...
Type: Permanent Location: Phoenix, Arizona
Posted: 2025-11-14 14:09:43
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The 3rd Shift Certified Maintenance Mechanic is responsible for the inspection, troubleshooting, and repair of process and facility-related equipment.
Equipment inspection includes preventative maintenance (PM) and associated documentation.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Comply with all safety policies (especially Cardinal Rules - e.g., Hot Work, LOTO, and line breaking).
Partner with Maintenance Supervisor and Facilities Manager to support LEAN initiatives to eliminate unplanned production interruptions due to process equipment failure.
Implement the needed preventative measures, including optimization of the PM program.
Ensure reliable operation of facility support processes and utilities (i.e., HVAC, Air Compressors, Tow motors, Hot Oil Heaters, and chiller systems).
Diagnose/Troubleshoot, repair/replace, and maintain facility electrical systems (e.g.
programmable logic controllers, human machine interfaces, and lighting) and components (e.g.
sensors, switches, valves, PLCs, and control wiring), and mechanical systems (e.g.
product vessels/reactors, pumps) and components.
Investigate equipment/process failures and difficulties to diagnose and troubleshoot faulty operation.
Assist the Maintenance Supervisor in arranging and coordinating contractors, safety permits, and tasks to support facility and process maintenance/repairs.
Serve, as needed, on process hazard analysis (PHA) teams/sessions.
EDUCATION AND EXPERIENCE:
One-year certificate from college or technical school.
Maintenance Mechanic Certificate or equivalent as deemed by the company.
Industrial Technology program graduate preferred.
Two to four years related experience and/or training.
Experience in LEAN manufacturing.
Military mechanical experience is a plus.
Experience in chemical/coating processing & production preferred.
Experience in dispensing operations preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Journeyman cards in various disciplines are preferred.
Ability to work overtime as needed.
Ability to manage multiple priorities, effective Team Player, self-motivated, quick learner.
Excellent communication skills with the ability to read, write, and communicate fluently in English.
Scope of experience: Electrical, Mechanical, HVAC, Welding.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-11-14 14:09:40
