-
3rd Shift Batch Maker
JOB DESCRIPTION RPM Industrial Coatings Group in Hudson, NC is looking for 3rd Shift Batch Makers (Shift Differential). $1,000 Sign-On Bonus! GENERAL SUMMARY Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods. This position also requires application and monitoring of established quality procedures and methods for production batches. Compiles, tabulates and summarizes QC data for analysis. Prepares and offers constructive criticisms relative to variables and deviations from prescribed standards of quality. Maintains statistical records having to do with quality, nature and causes of defects. Expedites and follows up changes to allow for prescribed quality standards. Request raw materials for use in formulas. Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge. PRINCIPLE DUTIES & RESPONSIBILITIES include the following. Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Consult with Main Lab chemist on products more than 10% out of product specifications Upon approval of product record data onto Quality Control car and enter information into computer data base Consult QC manual for specific requirements for product analysis of production batches and customers special requirements Calibrate QC equipment as required Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Experience and Education No previous experience required Experience in Manufacturing, Filling Area strongly preferred Specific Knowledge, Skills, and Abilities Required Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score Reasoning Ability Determine correct batch making procedures as instructed in initial training and described on batch ticket. Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms. The employee frequently is required to walk, sit, stoop, kneel and crouch. The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description. The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required. KEY PERFORMANCE INDICATORS (KPI) Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina Posted: 2026-09-10 15:12:22 -
2nd Shift QC Lab Technician
JOB DESCRIPTION RPM Industrial Coatings Group in Hudson, NC is looking for 2nd Shift QC Technician (Shift Differential). $1,000 Sign-On Bonus! GENERAL SUMMARY: Assists with application and monitoring of established quality procedures and methods for production batches and new raw materials. Compiles, tabulates and summarizes QC data for analysis. Prepares and communicates variables and deviations from prescribed standards of quality. Maintains statistical records having to do with quality, nature and causes of defects in D365. Expedites and follows up changes to allow for prescribed quality standards. PRINCIPLE DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Check production batches by comparison to standards Advise batchmaker of any necessary adjustments to apply to product batch Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specifications and to wet and/or dry samples Record results of comparison in D365 Consult with QC manager on products more than 10% out of product specifications Upon approval of product record data in D365 Check bulk raw materials against standard product specifications upon receipt Consult Quality control manual for specific requirements for product analysis of production batches as well as raw materials Calibrate QC/QA equipment as required Other duties as assigned by supervisor/manager QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Experience and Education Required High school diploma Proficient math and written communication skills Good computer skills - knowledge of Excel required Up to three years in industry related QC field helpful Prior batchmaking experience helpful Specific Knowledge, Skills, and Abilities Required Successful completion of Munsel Color test, helpful Familiarity with products used in batchmaking processes Familiarity with standard analytical tools Reasoning Ability Employee must work with limited supervision following written and verbal instructions. CERTIFICATES, LICENSES, REGISTRATIONS: N/A PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals to perform the essential functions. Occasional lifting and/or carrying of up to 40 lbs. Is required. Standing for extended periods of time (approximately 90% of 8-hour shift) is required with some sitting, walking, reaching, handling, bending and stooping. WORK ENVIRONMENT: Normal laboratory industry related environment conditions are present in the QC/QA laboratory. Employee on occasion will be required to go into the manufacturing areas, where normal manufacturing environment conditions are present. The company provides any required personal protective equipment. KEY PERFORMANCE INDICATORS (KPI) Turnover of correct production batches QC efficiency as gauged by customer RMA'sApply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina Posted: 2026-09-10 15:12:09 -
2nd Shift QC Lab Technician
JOB DESCRIPTION RPM Industrial Coatings Group in Hudson, NC is looking for 2nd Shift QC Technician (Shift Differential). $1,000 Sign-On Bonus! GENERAL SUMMARY: Assists with application and monitoring of established quality procedures and methods for production batches and new raw materials. Compiles, tabulates and summarizes QC data for analysis. Prepares and communicates variables and deviations from prescribed standards of quality. Maintains statistical records having to do with quality, nature and causes of defects in D365. Expedites and follows up changes to allow for prescribed quality standards. PRINCIPLE DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Check production batches by comparison to standards Advise batchmaker of any necessary adjustments to apply to product batch Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specifications and to wet and/or dry samples Record results of comparison in D365 Consult with QC manager on products more than 10% out of product specifications Upon approval of product record data in D365 Check bulk raw materials against standard product specifications upon receipt Consult Quality control manual for specific requirements for product analysis of production batches as well as raw materials Calibrate QC/QA equipment as required Other duties as assigned by supervisor/manager QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Experience and Education Required High school diploma Proficient math and written communication skills Good computer skills - knowledge of Excel required Up to three years in industry related QC field helpful Prior batchmaking experience helpful Specific Knowledge, Skills, and Abilities Required Successful completion of Munsel Color test, helpful Familiarity with products used in batchmaking processes Familiarity with standard analytical tools Reasoning Ability Employee must work with limited supervision following written and verbal instructions. CERTIFICATES, LICENSES, REGISTRATIONS: N/A PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals to perform the essential functions. Occasional lifting and/or carrying of up to 40 lbs. Is required. Standing for extended periods of time (approximately 90% of 8-hour shift) is required with some sitting, walking, reaching, handling, bending and stooping. WORK ENVIRONMENT: Normal laboratory industry related environment conditions are present in the QC/QA laboratory. Employee on occasion will be required to go into the manufacturing areas, where normal manufacturing environment conditions are present. The company provides any required personal protective equipment. KEY PERFORMANCE INDICATORS (KPI) Turnover of correct production batches QC efficiency as gauged by customer RMA'sApply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina Posted: 2026-09-10 15:12:00 -
Corporate Manager - EH&S - Arnette Polymers, LLC
JOB DESCRIPTION Position Summary: This position is responsible for developing, instituting, and overseeing all aspects of Environmental, Health, Safety and Corporate Compliance. This includes but is not limited to ensuring the company complies with all federal and state health, safety and environmental laws, regulations and reporting standards. Essential Functions: Works with all personnel at the facility to make sure all safety and environmental regulations are met and are being followed; Primarily responsible for both the overview of compliance as well as day-to-day operations with respect to safety and regulatory permits and reports. Ensure all are met with best practices and are compliant. This pertains to Federal, State, and Local regulations i.e. RCRA, EPA reporting requirements both directly to the EPA as well as those governed by Missouri DNR Air Pollution and HAZ WASTE; Conduct and coordinate on-site daily inspections to audit physical conditions and safe work practices. Including but not limited to: PPE for specific tasks, Emission Points, Work Permits, General Housekeeping, Spill Kits, Satellite and Pre-Transport Waste Storage Areas, Fire Extinguishers, Shower and Eye Wash, etc.; Be aware concerning all city, state and federal compliance regulations; Conduct and improve training programs related to all aspects of safety and compliance in the facility for all personnel. This includes but not limited to: new employee training and refreshers, forklift safety, OSHA, hazwoper, contractor orientation, FOT/IATA, etc. All training should be conducted in a timely manner and ensure additional process specific trainings are sufficient to maintain safety for employees. Maintain and update all plans required at the facility, including but not limited to: General Operating Permit, Hazardous Waste Generator Compliance, Storm water Pollution Prevention Plan, Spill Prevention Control and Countermeasures, Emergency Response Plan, Compressed Gas Plan, Contingency Plans, Hazard Communication Program and Security Plans; Essential reports such as TRI, Tier II, RMP, Quarterly and Biennial Waste Reporting (and their due dates) is the responsibility of your department. Assistance will be given from other staff to prepare and maintain this data; Participate and help conduct Safety Committee meetings; Works closely with HR manager and Vice President/CFO to become responsible for the hands-on administration of the workers' compensation program. Maintain the OSHA 300 log and tracking. Manage medical monitoring program; Maintain and improve environmental compliance programs related to hazardous wastes, air permitting, water pollution control, and community right-to-know programs; Select and maintain safety equipment and safety supplies on site. To include purchasing and keeping track of the supplies and managing the costs of these supplies; Reduce waste generation and costs of disposal. Upgrade monitoring, testing and instrumentation of waste and byproducts. Schedule and maintain all documentation related to all waste pickups, including certifying and recertifying waste profiles; Improve overall safety, housekeeping and reliability of plant work areas and compliance systems; Member of the PSM team; Implement and coordinate the documentation and schedule for preventative maintenance of equipment through the Faciliworks program. Maintain, create and close work orders. Keep Asset List up to date within Faciliworks database. Train all maintenance personnel on these procedures and manage to ensure proper procedures are followed; Ensure all permits (LOTO, Hot Work, Confined Space Entry), as well as MOC's are done correctly, and properly filed and archived. Become proficient in generating, reviewing and updating SDS's and Labels for our product line. This will be a multi-member team as GHS is being implemented in 2015, however, in 2016 and future years' maintenance of this system will become part of your department; Supervise, coach, motivate and develop staff. Minimum Requirements: Bachelor's degree in environmental management, Chemistry, Engineering, or a related discipline, or high school diploma if degree with 5 years or more of direct experience in Process Safety Management, or suitable combination of education and relevant experience as described; Specialized technical/aptitude experience: minimum of 3 years' experience in a manufacturing environment and demonstrated proficiency with manufacturing processes. Previous work and/or substantial knowledge of, including commonly used concepts, practices and procedures, within the thermoset polymer industry is a strongly considered asset; Demonstrated comprehensive knowledge of office and facilities coordination and basic leadership and management knowledge; (if applicable to position) Demonstrated organization, facilitation, communication and presentation skills; (if applicable to position) Ability to prioritize workflow and organize diverse material and ability to handle multiple, competing and changing priorities; ability to perform effectively without supervision and within established time limits and ongoing deadlines; Ability to interact and communicate effectively and professionally verbally and in writing, and to provide exceptional service internally and externally; Relevant computer skills for this position include knowledge and experience with Microsoft Office applications (Word, Excel, PowerPoint) and web-based applications. Experience using SAGE Platinum for Windows preferred. Displays adaptability in learning the use of relevant software and displays comprehension of fundamental computer practices and database management; Demonstrated ability to serve as a knowledgeable resource to the organization's management team that provides leadership and direction; Demonstrated leadership and vision managing staff groups and major projects or initiatives; Outstanding interpersonal relationship building and employee coaching and development skills. Benefits and Compensation The pay range for applicants in this position generally ranges between $120,000.00/year and $140,000/year. The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law. In addition to career advancement and growth, continuous training, and mentoring opportunities, Arnette Polymers offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans. Arnette Polymers is a division of The Stonhard Group, an RPM International company (NYSE: RPM) that is headquartered in Maple Shade, NJ and has more than 100 years of experience manufacturing and installing high performance, seamless floors throughout the world. We manufacture and install long-term floor, wall and lining solutions to markets including, but not limited to: food & beverage, general manufacturing, pharmaceutical, chemical processing, education, healthcare, government, technology and hospitality. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability. Pay: $120,000.00 - $140,00.00 per yearApply for this ad Online! ....Read more...
Type: Permanent Location: Richmond, Missouri Posted: 2026-09-10 15:12:00 -
2nd Shift QC Lab Technician
JOB DESCRIPTION RPM Industrial Coatings Group in Hudson, NC is looking for 2nd Shift QC Technician (Shift Differential). $1,000 Sign-On Bonus! GENERAL SUMMARY: Assists with application and monitoring of established quality procedures and methods for production batches and new raw materials. Compiles, tabulates and summarizes QC data for analysis. Prepares and communicates variables and deviations from prescribed standards of quality. Maintains statistical records having to do with quality, nature and causes of defects in D365. Expedites and follows up changes to allow for prescribed quality standards. PRINCIPLE DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Check production batches by comparison to standards Advise batchmaker of any necessary adjustments to apply to product batch Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specifications and to wet and/or dry samples Record results of comparison in D365 Consult with QC manager on products more than 10% out of product specifications Upon approval of product record data in D365 Check bulk raw materials against standard product specifications upon receipt Consult Quality control manual for specific requirements for product analysis of production batches as well as raw materials Calibrate QC/QA equipment as required Other duties as assigned by supervisor/manager QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Experience and Education Required High school diploma Proficient math and written communication skills Good computer skills - knowledge of Excel required Up to three years in industry related QC field helpful Prior batchmaking experience helpful Specific Knowledge, Skills, and Abilities Required Successful completion of Munsel Color test, helpful Familiarity with products used in batchmaking processes Familiarity with standard analytical tools Reasoning Ability Employee must work with limited supervision following written and verbal instructions. CERTIFICATES, LICENSES, REGISTRATIONS: N/A PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals to perform the essential functions. Occasional lifting and/or carrying of up to 40 lbs. Is required. Standing for extended periods of time (approximately 90% of 8-hour shift) is required with some sitting, walking, reaching, handling, bending and stooping. WORK ENVIRONMENT: Normal laboratory industry related environment conditions are present in the QC/QA laboratory. Employee on occasion will be required to go into the manufacturing areas, where normal manufacturing environment conditions are present. The company provides any required personal protective equipment. KEY PERFORMANCE INDICATORS (KPI) Turnover of correct production batches QC efficiency as gauged by customer RMA'sApply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina Posted: 2026-09-10 15:11:58 -
3rd Shift Batch Maker
JOB DESCRIPTION RPM Industrial Coatings Group in Hudson, NC is looking for 3rd Shift Batch Makers (Shift Differential). $1,000 Sign-On Bonus! GENERAL SUMMARY Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods. This position also requires application and monitoring of established quality procedures and methods for production batches. Compiles, tabulates and summarizes QC data for analysis. Prepares and offers constructive criticisms relative to variables and deviations from prescribed standards of quality. Maintains statistical records having to do with quality, nature and causes of defects. Expedites and follows up changes to allow for prescribed quality standards. Request raw materials for use in formulas. Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge. PRINCIPLE DUTIES & RESPONSIBILITIES include the following. Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Consult with Main Lab chemist on products more than 10% out of product specifications Upon approval of product record data onto Quality Control car and enter information into computer data base Consult QC manual for specific requirements for product analysis of production batches and customers special requirements Calibrate QC equipment as required Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Experience and Education No previous experience required Experience in Manufacturing, Filling Area strongly preferred Specific Knowledge, Skills, and Abilities Required Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score Reasoning Ability Determine correct batch making procedures as instructed in initial training and described on batch ticket. Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms. The employee frequently is required to walk, sit, stoop, kneel and crouch. The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description. The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required. KEY PERFORMANCE INDICATORS (KPI) Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina Posted: 2026-09-10 15:11:24 -
Corporate Manager - EH&S - Arnette Polymers, LLC
JOB DESCRIPTION Position Summary: This position is responsible for developing, instituting, and overseeing all aspects of Environmental, Health, Safety and Corporate Compliance. This includes but is not limited to ensuring the company complies with all federal and state health, safety and environmental laws, regulations and reporting standards. Essential Functions: Works with all personnel at the facility to make sure all safety and environmental regulations are met and are being followed; Primarily responsible for both the overview of compliance as well as day-to-day operations with respect to safety and regulatory permits and reports. Ensure all are met with best practices and are compliant. This pertains to Federal, State, and Local regulations i.e. RCRA, EPA reporting requirements both directly to the EPA as well as those governed by Missouri DNR Air Pollution and HAZ WASTE; Conduct and coordinate on-site daily inspections to audit physical conditions and safe work practices. Including but not limited to: PPE for specific tasks, Emission Points, Work Permits, General Housekeeping, Spill Kits, Satellite and Pre-Transport Waste Storage Areas, Fire Extinguishers, Shower and Eye Wash, etc.; Be aware concerning all city, state and federal compliance regulations; Conduct and improve training programs related to all aspects of safety and compliance in the facility for all personnel. This includes but not limited to: new employee training and refreshers, forklift safety, OSHA, hazwoper, contractor orientation, FOT/IATA, etc. All training should be conducted in a timely manner and ensure additional process specific trainings are sufficient to maintain safety for employees. Maintain and update all plans required at the facility, including but not limited to: General Operating Permit, Hazardous Waste Generator Compliance, Storm water Pollution Prevention Plan, Spill Prevention Control and Countermeasures, Emergency Response Plan, Compressed Gas Plan, Contingency Plans, Hazard Communication Program and Security Plans; Essential reports such as TRI, Tier II, RMP, Quarterly and Biennial Waste Reporting (and their due dates) is the responsibility of your department. Assistance will be given from other staff to prepare and maintain this data; Participate and help conduct Safety Committee meetings; Works closely with HR manager and Vice President/CFO to become responsible for the hands-on administration of the workers' compensation program. Maintain the OSHA 300 log and tracking. Manage medical monitoring program; Maintain and improve environmental compliance programs related to hazardous wastes, air permitting, water pollution control, and community right-to-know programs; Select and maintain safety equipment and safety supplies on site. To include purchasing and keeping track of the supplies and managing the costs of these supplies; Reduce waste generation and costs of disposal. Upgrade monitoring, testing and instrumentation of waste and byproducts. Schedule and maintain all documentation related to all waste pickups, including certifying and recertifying waste profiles; Improve overall safety, housekeeping and reliability of plant work areas and compliance systems; Member of the PSM team; Implement and coordinate the documentation and schedule for preventative maintenance of equipment through the Faciliworks program. Maintain, create and close work orders. Keep Asset List up to date within Faciliworks database. Train all maintenance personnel on these procedures and manage to ensure proper procedures are followed; Ensure all permits (LOTO, Hot Work, Confined Space Entry), as well as MOC's are done correctly, and properly filed and archived. Become proficient in generating, reviewing and updating SDS's and Labels for our product line. This will be a multi-member team as GHS is being implemented in 2015, however, in 2016 and future years' maintenance of this system will become part of your department; Supervise, coach, motivate and develop staff. Minimum Requirements: Bachelor's degree in environmental management, Chemistry, Engineering, or a related discipline, or high school diploma if degree with 5 years or more of direct experience in Process Safety Management, or suitable combination of education and relevant experience as described; Specialized technical/aptitude experience: minimum of 3 years' experience in a manufacturing environment and demonstrated proficiency with manufacturing processes. Previous work and/or substantial knowledge of, including commonly used concepts, practices and procedures, within the thermoset polymer industry is a strongly considered asset; Demonstrated comprehensive knowledge of office and facilities coordination and basic leadership and management knowledge; (if applicable to position) Demonstrated organization, facilitation, communication and presentation skills; (if applicable to position) Ability to prioritize workflow and organize diverse material and ability to handle multiple, competing and changing priorities; ability to perform effectively without supervision and within established time limits and ongoing deadlines; Ability to interact and communicate effectively and professionally verbally and in writing, and to provide exceptional service internally and externally; Relevant computer skills for this position include knowledge and experience with Microsoft Office applications (Word, Excel, PowerPoint) and web-based applications. Experience using SAGE Platinum for Windows preferred. Displays adaptability in learning the use of relevant software and displays comprehension of fundamental computer practices and database management; Demonstrated ability to serve as a knowledgeable resource to the organization's management team that provides leadership and direction; Demonstrated leadership and vision managing staff groups and major projects or initiatives; Outstanding interpersonal relationship building and employee coaching and development skills. Benefits and Compensation The pay range for applicants in this position generally ranges between $120,000.00/year and $140,000/year. The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law. In addition to career advancement and growth, continuous training, and mentoring opportunities, Arnette Polymers offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans. Arnette Polymers is a division of The Stonhard Group, an RPM International company (NYSE: RPM) that is headquartered in Maple Shade, NJ and has more than 100 years of experience manufacturing and installing high performance, seamless floors throughout the world. We manufacture and install long-term floor, wall and lining solutions to markets including, but not limited to: food & beverage, general manufacturing, pharmaceutical, chemical processing, education, healthcare, government, technology and hospitality. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability. Pay: $120,000.00 - $140,00.00 per yearApply for this ad Online! ....Read more...
Type: Permanent Location: Richmond, Missouri Posted: 2026-09-10 15:11:22 -
Nursery Manager / Deputy Manager
An opportunity has arisen for a Nursery Manager / Deputy Manager to join a childcare provider offering quality early years education, with a focus on EYFS development, outdoor learning and Forest School activities. As a Nursery Manager / Deputy Manager, you will be leading the nurserys day-to-day operation, supporting the team and ensuring high standards of care, learning and development. This full-time permanent role offers a salary range of £35,000 - £42,000 which is negotiable for the right candidate and benefits. We are looking for two Nursery Managers, with one position available in each location: Alton and Liss. You will be responsible for: * Overseeing the daily running of the nursery and maintaining effective operational procedures. * Managing staff rotas, team supervision and ongoing development plans. * Supporting the delivery of room-based care and maintaining high standards of practice. * Ensuring health and safety requirements are consistently met. * Monitoring childrens development and maintaining accurate records through the nurserys systems. * Building positive relationships with parents, colleagues and the wider nursery community. * Supporting and promoting outdoor learning and Forest School approach. The candidates from the following background will be considered: * Nursery Manager, Deputy Manager, Childcare Manager, EYFS Manager, Early Years Manager, Nursery Deputy Manager, Deputy Nursery Manager, Nursery Supervisor or in a similar role What we are looking for: * 3 years of Nursery and childcare management experience. * Proven leadership experience of 1 year within a nursery or early years setting. * A Level 3 Early Years qualification, Early Years degree or equivalent. * Strong working knowledge of the Early Years Foundation Stage (EYFS). * Experience working with children with Special Educational Needs (SEN). * An interest in Forest School and outdoor learning. * A full UK driving licence and a valid DBS Whats on offer * Competitive Salary * Generous annual leave, with additional leave available. * Paid time off for your birthday. * Free onsite parking. * Free hot lunches or discounted food. * Employee discount. * Company pension. * Company events. * Sick pay. * Company uniform. * Ongoing mentoring and training. This is a great opportunity for a Nursery Manager to join a supportive childcare environment and make a real contribution to the childrens day-to-day experience. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone, or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us. Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003. ....Read more...
Type: Permanent Location: Alton, Liss, England Start: Duration: Salary / Rate: £42000 Per Annum Posted: 2026-09-10 11:18:54 -
Specification Specialist I
JOB DESCRIPTION GENERAL PURPOSE OF THE JOB: The Specification Specialist reviews and develops project specifications and Scopes of Work to ensure compliance with local building codes, industry standards, and company standards, using their expertise to select appropriate items based on project requirements. We are looking for an Specification Specialist to support our Pacific Northwest Region. ESSENTIAL DUTIES AND RESPONSIBILITIES: Develop AIA MasterFormat specifications that comply with Tremco requirements, purchasing agreements, local building codes, and industry standards (NRCA, SPRI, Factory Mutual, etc.). Develop specifications in compliance with IBC, IECC, and Tremco-specific requirements & standards Develop specifications based on individual project Scopes of Work, using expertise, experience, and best practices to select appropriate items. Assist Estimators in understanding specifications for bid preparation and pricing. Calculate wind-uplift design pressures based on project specifics. Understand and apply 3rd party test reports for Tremco systems for specifications Identify and resolve service, process, or quality system problems; ensure proper resolution implementation. Implement best practices to enhance the efficiency and accuracy of the specification development process. Stay updated with compliance policies to ensure specifications and drawings align with contract agreements. Monitor and ensure compliance with evolving building codes, industry regulations, and roofing standards by staying current with building code changes; escalate and implement necessary adjustments in design and construction practices. Ensure specification work is completed in a timely manner Ensure specification work is compliant, clear, concise, correct, and complete. Ensure compatibility of specified products. Collaborate, coordinate, and communicate with Program Managers, Construction Managers, Sales, Estimators, and Field Technicians throughout the specification development process to ensure contract requirements are specified. Communicate with Product & Technical as needed throughout the specification development process. Provide support to the Specification Specialist team and Product & Technical Solutions Department to achieve company-wide goals and targets. Maintain educational credentials Responsibilities include any and all responsibilities deemed necessary by the manager Utilize Tremco's platforms for job and data management (E-builder, Spec Writer, Salesforce, Microsoft Teams, etc.). Proficient in Tremco's products and systems, including application, use, coverage rates, compatibility, and limitations. Proficient in UL Product iQ, RoofNav, Florida Building Code (NEMO reports) and NRCA Roof Wind Designer websites/programs. These additional duties may also be required depending on region: Prepare and review addenda and pre-bid documentation as needed. Create AutoCAD drawings from detailed Scopes of Work. Use established cost models to build a price for company bids Assist & train Sales Reps with the Specification process Assist & train in proposal/presentation preparation for key accounts EDUCATION: Bachelor's degree or applicable 3-5 years of experience in Specifications EXPERIENCE: 3-5 years of applicable experience in Specifications; 2+ years of in-field experience preferred. CERTIFICATES, LICENSES, REGISTRATIONS: American Institute of Architects (AIA) member IIBEC member Construction Specifications Institute (CSI) member OTHER SKILLS AND ABILITIES: Computer Skills - Ability to efficiently use computers, type accurately, navigate the internet, and utilize basic computer functions to support daily tasks and communication.Highly ProficientAttention to Detail - Ensuring specifications are accurate and meet company standards.Highly ProficientTechnical Knowledge - Understanding of building materials and codes, construction techniques, as well as building material characteristics, performance and compatibilityProficientTechnical Knowledge - CAD knowledge / familiarityProficientAnalytical Skills - Ability to assess project requirements and select appropriate items.ProficientCommunication Skills - Effectively communicate verbally and in writingProficientOrganizational Skills - Managing multiple projects and administrative tasks efficiently in alignment with deadlinesProficientProblem-Solving - Addressing any discrepancies or issues in project specificationsProficientCollaboration Skills - Effectively collaborating with colleagues and sales teams.ProficientTechnical Adaptability - Learning and using various software or tools; adapting to new technologies and processes; troubleshooting and resolving technical issues.ProficientCognitive Flexibility - Ability to learn new concepts quickly; problem solving in novel situations; open-mindedness to different perspectivesProficientProgram Familiarity - Microsoft 365 suite, Salesforce, RoofNav, UL IQ, Miami-Dade Product Control SearchProficientThe salary range for applicants in this position generally ranges between $74,000 and $90,000. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Benefits: Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Commission, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Seattle, Washington Posted: 2026-09-09 23:13:18 -
Project Administrator
JOB DESCRIPTION BUILD YOUR FUTURE WHILE YOU HELP BUILD A BETTER WORLD! Tremco Construction Products Group brings together Roofing & Building Maintenance, Commercial Sealants, Waterproofing divisions, Tremco Barrier Solutions Inc., Dryvit, Nudura and Willseal brands, Prebuck LLC, Weatherproofing Technologies, Inc., Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America. If you're looking for a place to build a career and a life, with great benefits, advancement opportunity, technology, people and a commitment to a sustainable future, you've found it with us. PROJECT ADMINISTRATOR This is a 100% remote position that will support the Pacific Northwest and Pacific Southwest Regions of our Western Division. Preferred candidate will reside in the Mountain or Pacific time zone. GENERAL PURPOSE OF THE JOB: Project Administrators play a crucial role in ensuring the smooth execution and success of projects by providing essential administrative support in collaboration with Construction Managers and Field Representatives throughout various project phases. Specifically, the Business Operations Project Administrator is tasked with managing and coordinating all administrative aspects for an array of project types. This includes services like Patch and Repair, Patch and Repair Plus, General Contracting, Safety Patch and Repair, Building Envelope services, IAQ Services (both standalone and integrated with General Contracting), Job Site Inspections, Roofing Advisor Days, Consulting, Diagnostics, TRACE, ACT, and several emergency repair services. Key responsibilities encompass managing contractor payables, handling customer billings and receivables, ensuring compliance with standards and policies, applying book pricing and WTI documentation policies, overseeing commission and discounting policies, processing change orders, document management, financial data entry, and coordinating communications with Field Resources and Customers as required. Success in this role requires a high level of professionalism, strong organizational and prioritization skills, effective time management, and proficiency in relevant technology and software. Excellent interpersonal, written, and oral communication skills, coupled with meticulous attention to detail, accuracy, and a self-motivated attitude, are vital. The administrator must work effectively both independently and as part of a team, demonstrating the ability to collaborate with customers, field staff, and various internal stakeholders. This position involves regular interaction with multiple departments and teams, including General Services, General Contracting field operations, Field Representatives, Business Operations, IT, Finance/Accounting, Warranty, Tremcare, Sales, Accounts Payable, Credit, and Products. Given the dynamic and fast-paced nature of the role, flexibility and adaptability are essential, as the Project Administrator must navigate and respond to evolving project requirements and organizational needs. ESSENTIAL DUTIES AND RESPONSIBILITIES: The Project Administrator plays an integral role in the project lifecycle by validating, organizing, and ensuring compliance for all project documentation and financial processes. Upon receiving SAP Sales Order information from Customer Service Representatives, the administrator confirms all compliance requirements based on the WTI Price Book Policy/Procedures and Contract Management Policy, completing checklists to ensure data accuracy and completeness. Key responsibilities include managing critical project documents, such as vendor applications, subcontracts, purchase orders, Master Service Agreements, specifications, certificates of insurance, payment and performance bonds, prevailing wage rates, certified payroll reports, and state-specific compliance documentation. Project Administrators also facilitate and manage compliance submissions as needed. This role includes dispatching service orders to WTI Technicians, tailored to the specific project type. For General Contracting projects, the administrator provides WTI Superintendents with essential service orders and field report links to streamline daily reporting. Additionally, they maintain a comprehensive tracking spreadsheet for all projects, providing up-to-date project insights. Throughout each project, the Project Administrator coordinates with Construction Managers, Field Representatives, field technicians, customers, and management to ensure seamless operations. Project management duties cover tracking time and expenses, managing payables over 30 days, monitoring plan versus actual costs, verifying that all documents (such as bonds, insurance, and submittals) are submitted and approved, ensuring costs align with budget expectations, and validating all projects older than 90 days. This role includes preparing customer invoices with accuracy and timeliness, adhering to book pricing, time and materials (T&M), not-to-exceed (NTE) limits, lump-sum pricing, and customer-specific billing requirements. Project Administrators must understand and apply WTI's commission and discount policies when processing invoices across both General Contracting and General Services. They also review projects for job closeout audits, updating planned versus actual costs, and completing a job closing checklist for final approval. The Project Administrator is essential to ensuring that WTI's policies and procedures are followed precisely, maintaining accurate financial data for reporting at month-end, quarter-end, and fiscal year-end. This role requires a comprehensive understanding of WTI's operational, financial, and compliance frameworks to support accurate project execution and reporting. OTHER REQUIRED DUTIES: Project Management within the following technology platforms, Salesforce, e-Builder, RoofSnap, OLI, Smartsheet, WTI Quick Price App, Concur Hours to Day Conversions Calculating Market Price Weekly backlog meetings Review and resolve customer disputes Manage tech service expenses Assist with travel and hotel arrangements for maintenance and repair routes Coordinate larger supply and equipment purchases, arrange pickup, payments and cost allocation Coordinate material orders Review and process Readsoft workflow items Monitor daily, weekly and monthly reports Customer/Vendor Billing Portals Bi-weekly Project Review Meetings Payment Reconciliation Report low margin jobs Facilitate effective communication Process Implementation Reviews Assist in the preparation of project presentations, reports, and other project-related materials Problem Solving Conflict Management Escalation of concerns and issues Archive Project files as necessary Participate in special projects when necessary EDUCATION: Business Management/Administration or equivalent combination of education and experience. EXPERIENCE: 4-7 years related experience and/or training Project Administration/Management, Construction Accounting, Sarbanes-Oxley, public procurement or job order contract, prevailing wage OTHER SKILLS AND ABILITIES: Ability to handle multiple tasks, prioritize effectively, and manage time efficiently. Keeping records, documents, and project files organized and easily accessible. Excellent written and verbal communication skills to interact with team members, stakeholders, and clients. Proficiency in project management software, as well as standard office applications like Microsoft Office (Word, Excel, PowerPoint). Capacity to identify potential issues early on and proactively seek solutions or escalate problems as needed. Ability to think critically and adapt to changing project conditions. Understanding of project budgets, cost tracking, and financial reporting. Ability to assist with financial documentation, such as purchase orders, invoices, and expense reports. Strong time management skills to handle project deadlines and ensure timely task completion. Ability to manage time effectively in a fast-paced environment. Ability to work well with a diverse group of people, from team members to external vendors. Skill in fostering a collaborative, respectful work environment. Strong focus on meeting the needs of clients and stakeholders, understanding project requirements, and keeping them updated on project progress. Ability to resolve conflicts and keep the team working toward common goals. Handling disputes diplomatically and maintaining positive relationships among project team members. Knowledge of State prevailing wage, DB and SCAThe salary range for applicants in this position generally ranges between $57,000 and $66,000. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Benefits: Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Commission, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio Posted: 2026-09-09 23:13:10 -
Field Resource Foreman
JOB DESCRIPTION GENERAL PURPOSE OF THE JOB: The WTI Field Resource Foreman (Foreman) oversees and performs the safety, efficiency, and quality of the WTI field service business. Safety is our primary priority and will be embedded into every discussion, meeting, and project. As the clear and established leader of the WTI crew, the Foreman is focused on safety, crew management, and efficient execution of all WTI projects assigned within their respective region. It is the Foreman's responsibility to deliver timely service to all WTI customers and manage exposure to risks. ESSENTIAL DUTIES AND RESPONSIBILITIES: Conduct the daily onsite safety brief before the start of the WTI project with the Sales Rep, customer, and the WTI crew. Inspect and ensure all surroundings, equipment, and tools and identify and discuss any safety concerns. Complete the Daily Hazard Analysis form and submit it to the Supervisors as applicable. Foreman also ensures that all technicians complete Daily Hazard Analysis. Ensure all project communication is completed before the start of any WTI project. This includes but is not limited to communication with: WTI Field Resources Supervisor (Supervisor) daily and before starting new projects (ensure any/all communication with the Sales Reps is also shared with the Supervisor. Sales Rep weekly and/or as needed and before new projects. WTI crew members will discuss the scope of work, daily tasks, and the overall schedule. Customer/Client (as needed or required by the Sales Rep) daily and/or weekly. Efficient management of projects will include managing the crew's start and end times, daily productivity (hours, man-days, etc.), and ensuring tools and materials are available to complete the assigned project safely and efficiently. Complete the project per the approved scope of work or specification and after issuance by the Supervisor. Using a designated company-mandated reporting tool, the Foreman will complete an end-of-day and/or end-of-project walk-through to ensure the quality of workmanship and address any punch list items before leaving the job site. These items will include updates on work performed, materials consumed (T&M projects), and supplies purchased. Ensure all WTI Field Resources Reps (Field Reps) have a professional appearance and customer interaction while completing services for a customer. Responsible for ordering, tracking, and monitoring inventory and ensuring quarterly cycle counts are completed and submitted timely. Provide pricing for self-performing projects over $12,500. Submit all proposals of over $20,000 to the Supervisor for review and approval before submitting them to the GS Administrator for logging and distribution to the Sales Rep. Monitor and manage the Field Reps. Consult with the Supervisor to take appropriate steps or corrective measures to resolve employee work-related issues and necessary documentation. Work with the Supervisor to elevate the issues to HR as required. Coordinate with the Supervisor to create project schedules. Review time reports daily and make necessary corrections with the admin team. Attending all appropriate calls, meetings, and trainings. Perform any other duties and/or projects as required or assigned by the Supervisor or Regional Business Manager. EXPERIENCE: Minimum of five years of experience in the roofing industry. Must be thoroughly familiar with built-up, EPDM, PVC, and other forms of low-slope roofing systems, as well as metal and other steep-sloop roofing systems, and how to repair them properly. CERTIFICATES, LICENSES, REGISTRATIONS: 30-hour OSHA certification Registered Roof Observer (RRO) preferred but not required. OTHER SKILLS AND ABILITIES: Ability to travel out of town, including overnight stays. Must have reliable transportation and a valid driver's license. Ability to work weekends and/or holidays when needed. Ability to pass a pre-employment drug test. Ability to read, write, and speak English. The salary range for applicants in this position generally ranges between $55,000 and $75,000. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Springfield, Illinois Posted: 2026-09-09 23:12:26 -
Specification Specialist I
JOB DESCRIPTION GENERAL PURPOSE OF THE JOB: The Specification Specialist reviews and develops project specifications and Scopes of Work to ensure compliance with local building codes, industry standards, and company standards, using their expertise to select appropriate items based on project requirements. We are looking for an Specification Specialist to support our Pacific Northwest Region. ESSENTIAL DUTIES AND RESPONSIBILITIES: Develop AIA MasterFormat specifications that comply with Tremco requirements, purchasing agreements, local building codes, and industry standards (NRCA, SPRI, Factory Mutual, etc.). Develop specifications in compliance with IBC, IECC, and Tremco-specific requirements & standards Develop specifications based on individual project Scopes of Work, using expertise, experience, and best practices to select appropriate items. Assist Estimators in understanding specifications for bid preparation and pricing. Calculate wind-uplift design pressures based on project specifics. Understand and apply 3rd party test reports for Tremco systems for specifications Identify and resolve service, process, or quality system problems; ensure proper resolution implementation. Implement best practices to enhance the efficiency and accuracy of the specification development process. Stay updated with compliance policies to ensure specifications and drawings align with contract agreements. Monitor and ensure compliance with evolving building codes, industry regulations, and roofing standards by staying current with building code changes; escalate and implement necessary adjustments in design and construction practices. Ensure specification work is completed in a timely manner Ensure specification work is compliant, clear, concise, correct, and complete. Ensure compatibility of specified products. Collaborate, coordinate, and communicate with Program Managers, Construction Managers, Sales, Estimators, and Field Technicians throughout the specification development process to ensure contract requirements are specified. Communicate with Product & Technical as needed throughout the specification development process. Provide support to the Specification Specialist team and Product & Technical Solutions Department to achieve company-wide goals and targets. Maintain educational credentials Responsibilities include any and all responsibilities deemed necessary by the manager Utilize Tremco's platforms for job and data management (E-builder, Spec Writer, Salesforce, Microsoft Teams, etc.). Proficient in Tremco's products and systems, including application, use, coverage rates, compatibility, and limitations. Proficient in UL Product iQ, RoofNav, Florida Building Code (NEMO reports) and NRCA Roof Wind Designer websites/programs. These additional duties may also be required depending on region: Prepare and review addenda and pre-bid documentation as needed. Create AutoCAD drawings from detailed Scopes of Work. Use established cost models to build a price for company bids Assist & train Sales Reps with the Specification process Assist & train in proposal/presentation preparation for key accounts EDUCATION: Bachelor's degree or applicable 3-5 years of experience in Specifications EXPERIENCE: 3-5 years of applicable experience in Specifications; 2+ years of in-field experience preferred. CERTIFICATES, LICENSES, REGISTRATIONS: American Institute of Architects (AIA) member IIBEC member Construction Specifications Institute (CSI) member OTHER SKILLS AND ABILITIES: Computer Skills - Ability to efficiently use computers, type accurately, navigate the internet, and utilize basic computer functions to support daily tasks and communication.Highly ProficientAttention to Detail - Ensuring specifications are accurate and meet company standards.Highly ProficientTechnical Knowledge - Understanding of building materials and codes, construction techniques, as well as building material characteristics, performance and compatibilityProficientTechnical Knowledge - CAD knowledge / familiarityProficientAnalytical Skills - Ability to assess project requirements and select appropriate items.ProficientCommunication Skills - Effectively communicate verbally and in writingProficientOrganizational Skills - Managing multiple projects and administrative tasks efficiently in alignment with deadlinesProficientProblem-Solving - Addressing any discrepancies or issues in project specificationsProficientCollaboration Skills - Effectively collaborating with colleagues and sales teams.ProficientTechnical Adaptability - Learning and using various software or tools; adapting to new technologies and processes; troubleshooting and resolving technical issues.ProficientCognitive Flexibility - Ability to learn new concepts quickly; problem solving in novel situations; open-mindedness to different perspectivesProficientProgram Familiarity - Microsoft 365 suite, Salesforce, RoofNav, UL IQ, Miami-Dade Product Control SearchProficientThe salary range for applicants in this position generally ranges between $74,000 and $90,000. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Benefits: Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Commission, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Seattle, Washington Posted: 2026-09-09 23:11:59 -
Nursery Manager / Deputy Manager
An opportunity has arisen for a Nursery Manager / Deputy Manager to join a childcare provider offering quality early years education, with a focus on EYFS development, outdoor learning and Forest School activities. As a Nursery Manager / Deputy Manager, you will be deading the nurserys day-to-day operation, supporting the team and ensuring high standards of care, learning and development. This full-time permanent role offers a salary range of £35,000 - £42,000 which is negotiable for the right candidate and benefits. We are looking for two Nursery Managers, with one position available at each of our Hampshire locations. You will be responsible for: * Overseeing the daily running of the nursery and maintaining effective operational procedures. * Managing staff rotas, team supervision and ongoing development plans. * Supporting the delivery of room-based care and maintaining high standards of practice. * Ensuring health and safety requirements are consistently met. * Monitoring childrens development and maintaining accurate records through the nurserys systems. * Building positive relationships with parents, colleagues and the wider nursery community. * Supporting and promoting outdoor learning and Forest School approach. The candidates from the following background will be considered: * Nursery Manager, Deputy Manager, Childcare Manager, EYFS Manager, Early Years Manager, Nursery Deputy Manager, Deputy Nursery Manager, Nursery Supervisor or in a similar role What we are looking for: * Approx. 3 years of Nursery and childcare management experience. * Proven leadership experience of 1 year within a nursery or early years setting. * A Level 3 Early Years qualification, Early Years degree or equivalent. * Strong working knowledge of the Early Years Foundation Stage (EYFS). * Experience working with children with Special Educational Needs (SEN). * An interest in Forest School and outdoor learning. * A full UK driving licence and a valid DBS Whats on offer * Competitive Salary * Generous annual leave, with additional leave available. * Paid time off for your birthday. * Free onsite parking. * Free hot lunches or discounted food. * Employee discount. * Company pension. * Company events. * Sick pay. * Company uniform. * Ongoing mentoring and training. This is a great opportunity for a Nursery Manager to join a supportive childcare environment and make a real contribution to the childrens day-to-day experience. Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone, or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please contact us. Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003. ....Read more...
Type: Permanent Location: Alton, Liss, England Start: Duration: Salary / Rate: £42000 Per Annum Posted: 2026-09-09 17:40:40 -
Construction Management Associate
JOB DESCRIPTION GENERAL PURPOSE OF THE JOB: The Construction Management Associate is responsible for assisting the Construction Manager in all aspects associated with a construction-related project. This will include but is not limited to, General Contracting projects, larger-scale Contracting Patch and Repair Projects, TremCares, etc. This will involve working with the Construction Manager, Project Superintendent, or WTI Technician assigned to the project to ensure the project is effectively executed anc completed safely, and all contractual obligations are adhered to. Additional duties will include participating in onsite meetings, scope of work development, proposal review, specification review, completion of project schedules, assembling project submittals, obtaining building permits, project closeout documents, and other duties as directed by the Construction Manager. ESSENTIAL DUTIES AND RESPONSIBILITIES: Responsible for contributing to and validating proposals and specifications. Conceptual Phase (specification development, establishment of milestone dates) Program Planning Phase Design Phase Conduct Pre-Proposal Meetings Proposal Phase Construction Phase Conduct Pre-Construction Effective Close-out Cost Estimates and schedules Use of ebuilder for all project documentation per policy manual. Assist the Construction Manager in tracking project costs, budget variances, and profitability. Accountable for Quality Assurance. Ensure the subcontractor has submitted the required documents. Establish timelines and goals. Manage key metrics and report as required. Coordinate with Program Managers, Project Administrators, Project Estimators, Specification Writers, Sales Representatives, and RBM when needed. Assist in the review of submitted proposals and contractor interviews for specification and contractual compliance. Review of line-item generated proposal documents. Direct Project Superintendents as needed. Competencies: Adaptable, willing to change with business necessity Professional and lead by example Diversity awareness and ability to adjust to multiple personalities Planning and organizational skills. Able to juggle multiple priorities and demonstrate good task management Excellent customer service skills and ability to build relationships Technical knowledge of all products and services that WTI offers Understanding of Construction Management tasks Superior written, oral, and digital communication skills Able to create performance reporting 24-hour reply response to all inquiries Ability to use and understand Microsoft Office and other software as required. Specification Development Stage: Works with the Construction Manager and Sales Representative to establish a scope of work for the project. Completion of specification requests and related documents. Responsible for specification review as required by the Construction Manager. Pre-Proposal Stage: Conducts Pre-Proposal Meeting and distributes completed Pre-Proposal Meeting documentation to all applicable parties. Assist the Construction Manager in reviewing proposals. Prepare Proposal Documents as directed by the Construction Manager. Pre-Construction Stage: Publish the Project Schedule. Assists Construction Manager in planning and coordinating the Pre-Construction Meeting. Engages with the Project Superintendent to provide necessary project information. Conducts Pre-Construction Meetings and distributes completed Pre-Construction Meeting documentation to all applicable parties. Obtain Building Permit when required. Construction Stage: Review Daily Inspection Forms and ensure they are distributed to all applicable parties and uploaded into project files. Visits job site as necessary or directed by the Construction Manager. Conduct weekly Progress Meetings, virtual or onsite, and distribute meeting minutes to all applicable parties. Maintain Project Schedule and update on a weekly basis. Perform site audits as appropriate. Review subcontractor payment requests with the Construction Manager. Assemble AIA billing applications for the Construction Manager's review and approval. Assist the Construction Manager, Project Superintendent, Subcontractor, Owner, or Sales Representative as needed. Close Out Stage: Assist the Construction Manager in coordinating the final inspection. Ensure all required documents are uploaded into the project files. Other Requirements: Ability to travel out of town may include overnight travel Must have transportation and a valid driver's license Ability to work weekends and/or holidays if needed Ability to pass pre-employment drug test Ability to read, write, and speak English Open to relocation after completion of the programThe salary range for applicants in this position generally ranges between $52,000 and $55,000. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Seattle, Washington Posted: 2026-09-09 15:13:43 -
Sanitation Worker
JOB DESCRIPTION Basic Function and Scope of Responsibilities: Sanitation is responsible for all activities involved in maintaining the cleanliness and food safe environment of the Processing facility, surrounding area and equipment. Reports to the Production supervisor and receives direction concerning sanitation activities. Perform daily sanitation of all processing lines and mixing rooms. Ensure food safety and food defense in the plant. Promotes a safe work environment through knowledge of the sanitation program and commitment to a safe workplace for all. Ensures that staff are informed of corporate safety requirements and that safety is a priority in day to day functions. Develops and implements new methods, procedures, and systems to improve quality and food safety performance, determine and implement corrective actions. Follow best practices for safety, SDS guidelines, and the proper use of personal protective equipment. Responsible for filling out daily sanitation logs, performance reports and shift paperwork. Regularly complete training in methods of improving sanitation processes Makes certain that all areas are kept clean of waste, debris, and liquids to avoid safety hazards Ensures that at the end of the shift all documentation pertinent to sanitation. Maintains effective communications between the Manager and shift supervisors. Other duties as assigned by manager. Education Requirements: High School Diploma or equivalent Must possess good reading, writing and math skills. Must always be safety conscious. Must be able to lift up to 60 lbs. Must be self-directed and able to work without close supervision Willing and able to work overtime as needed Hardworking, dependable, and safety conscious Bilingual - English/Spanish is preferred Willingness to work varied shifts, including nights, weekends and holidays Strong quantitative skills, interpersonal skills and the ability to think critically. Ability to effectively plan, organize and prioritize work. Read and understand chemical labels. Read and understand HACCP along with SQF and OSHA requirements. Demonstrated ability to motivate and train employees Training, Skills, Knowledge and/or Experience: Must possess good reading, writing and math skills. Must always be safety conscious. Must be able to lift up to 60 lbs. Must be self-directed and able to work without close supervision Willing and able to work overtime as needed Hardworking, dependable, and safety conscious Bilingual - English/Spanish is preferred Willingness to work varied shifts, including nights, weekends and holidays Strong quantitative skills, interpersonal skills and the ability to think critically. Ability to effectively plan, organize and prioritize work. Read and understand chemical labels. Read and understand HACCP along with SQF and OSHA requirements. Position Reports To: Production Supervisor Apply for this ad Online! ....Read more...
Type: Permanent Location: Elgin, Illinois Posted: 2026-09-09 15:13:39 -
Project Administrator
JOB DESCRIPTION BUILD YOUR FUTURE WHILE YOU HELP BUILD A BETTER WORLD! Tremco Construction Products Group brings together Roofing & Building Maintenance, Commercial Sealants, Waterproofing divisions, Tremco Barrier Solutions Inc., Dryvit, Nudura and Willseal brands, Prebuck LLC, Weatherproofing Technologies, Inc., Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America. If you're looking for a place to build a career and a life, with great benefits, advancement opportunity, technology, people and a commitment to a sustainable future, you've found it with us. PROJECT ADMINISTRATOR This is a 100% remote position that will support the Pacific Northwest and Pacific Southwest Regions of our Western Division. Preferred candidate will reside in the Mountain or Pacific time zone. GENERAL PURPOSE OF THE JOB: Project Administrators play a crucial role in ensuring the smooth execution and success of projects by providing essential administrative support in collaboration with Construction Managers and Field Representatives throughout various project phases. Specifically, the Business Operations Project Administrator is tasked with managing and coordinating all administrative aspects for an array of project types. This includes services like Patch and Repair, Patch and Repair Plus, General Contracting, Safety Patch and Repair, Building Envelope services, IAQ Services (both standalone and integrated with General Contracting), Job Site Inspections, Roofing Advisor Days, Consulting, Diagnostics, TRACE, ACT, and several emergency repair services. Key responsibilities encompass managing contractor payables, handling customer billings and receivables, ensuring compliance with standards and policies, applying book pricing and WTI documentation policies, overseeing commission and discounting policies, processing change orders, document management, financial data entry, and coordinating communications with Field Resources and Customers as required. Success in this role requires a high level of professionalism, strong organizational and prioritization skills, effective time management, and proficiency in relevant technology and software. Excellent interpersonal, written, and oral communication skills, coupled with meticulous attention to detail, accuracy, and a self-motivated attitude, are vital. The administrator must work effectively both independently and as part of a team, demonstrating the ability to collaborate with customers, field staff, and various internal stakeholders. This position involves regular interaction with multiple departments and teams, including General Services, General Contracting field operations, Field Representatives, Business Operations, IT, Finance/Accounting, Warranty, Tremcare, Sales, Accounts Payable, Credit, and Products. Given the dynamic and fast-paced nature of the role, flexibility and adaptability are essential, as the Project Administrator must navigate and respond to evolving project requirements and organizational needs. ESSENTIAL DUTIES AND RESPONSIBILITIES: The Project Administrator plays an integral role in the project lifecycle by validating, organizing, and ensuring compliance for all project documentation and financial processes. Upon receiving SAP Sales Order information from Customer Service Representatives, the administrator confirms all compliance requirements based on the WTI Price Book Policy/Procedures and Contract Management Policy, completing checklists to ensure data accuracy and completeness. Key responsibilities include managing critical project documents, such as vendor applications, subcontracts, purchase orders, Master Service Agreements, specifications, certificates of insurance, payment and performance bonds, prevailing wage rates, certified payroll reports, and state-specific compliance documentation. Project Administrators also facilitate and manage compliance submissions as needed. This role includes dispatching service orders to WTI Technicians, tailored to the specific project type. For General Contracting projects, the administrator provides WTI Superintendents with essential service orders and field report links to streamline daily reporting. Additionally, they maintain a comprehensive tracking spreadsheet for all projects, providing up-to-date project insights. Throughout each project, the Project Administrator coordinates with Construction Managers, Field Representatives, field technicians, customers, and management to ensure seamless operations. Project management duties cover tracking time and expenses, managing payables over 30 days, monitoring plan versus actual costs, verifying that all documents (such as bonds, insurance, and submittals) are submitted and approved, ensuring costs align with budget expectations, and validating all projects older than 90 days. This role includes preparing customer invoices with accuracy and timeliness, adhering to book pricing, time and materials (T&M), not-to-exceed (NTE) limits, lump-sum pricing, and customer-specific billing requirements. Project Administrators must understand and apply WTI's commission and discount policies when processing invoices across both General Contracting and General Services. They also review projects for job closeout audits, updating planned versus actual costs, and completing a job closing checklist for final approval. The Project Administrator is essential to ensuring that WTI's policies and procedures are followed precisely, maintaining accurate financial data for reporting at month-end, quarter-end, and fiscal year-end. This role requires a comprehensive understanding of WTI's operational, financial, and compliance frameworks to support accurate project execution and reporting. OTHER REQUIRED DUTIES: Project Management within the following technology platforms, Salesforce, e-Builder, RoofSnap, OLI, Smartsheet, WTI Quick Price App, Concur Hours to Day Conversions Calculating Market Price Weekly backlog meetings Review and resolve customer disputes Manage tech service expenses Assist with travel and hotel arrangements for maintenance and repair routes Coordinate larger supply and equipment purchases, arrange pickup, payments and cost allocation Coordinate material orders Review and process Readsoft workflow items Monitor daily, weekly and monthly reports Customer/Vendor Billing Portals Bi-weekly Project Review Meetings Payment Reconciliation Report low margin jobs Facilitate effective communication Process Implementation Reviews Assist in the preparation of project presentations, reports, and other project-related materials Problem Solving Conflict Management Escalation of concerns and issues Archive Project files as necessary Participate in special projects when necessary EDUCATION: Business Management/Administration or equivalent combination of education and experience. EXPERIENCE: 4-7 years related experience and/or training Project Administration/Management, Construction Accounting, Sarbanes-Oxley, public procurement or job order contract, prevailing wage OTHER SKILLS AND ABILITIES: Ability to handle multiple tasks, prioritize effectively, and manage time efficiently. Keeping records, documents, and project files organized and easily accessible. Excellent written and verbal communication skills to interact with team members, stakeholders, and clients. Proficiency in project management software, as well as standard office applications like Microsoft Office (Word, Excel, PowerPoint). Capacity to identify potential issues early on and proactively seek solutions or escalate problems as needed. Ability to think critically and adapt to changing project conditions. Understanding of project budgets, cost tracking, and financial reporting. Ability to assist with financial documentation, such as purchase orders, invoices, and expense reports. Strong time management skills to handle project deadlines and ensure timely task completion. Ability to manage time effectively in a fast-paced environment. Ability to work well with a diverse group of people, from team members to external vendors. Skill in fostering a collaborative, respectful work environment. Strong focus on meeting the needs of clients and stakeholders, understanding project requirements, and keeping them updated on project progress. Ability to resolve conflicts and keep the team working toward common goals. Handling disputes diplomatically and maintaining positive relationships among project team members. Knowledge of State prevailing wage, DB and SCAThe salary range for applicants in this position generally ranges between $57,000 and $66,000. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Benefits: Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Commission, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio Posted: 2026-09-09 15:13:16 -
Pricing Analyst (Sr)
JOB DESCRIPTION BUILD YOUR FUTURE WHILE YOU HELP BUILD A BETTER WORLD! Tremco CPG is an aggressive, growth-oriented company with revenues of over $1 billion. We are a world leader in solving complex waterproofing and roofing problems for our commercial, institutional, and industrial customers. If you're looking for a place to build a career, with great benefits, advancement opportunities, technology, people and a commitment to a sustainable future, you've found it with us. We are currently looking for an innovative Sr. pricing analyst to increase our business' competitiveness and profitability. In this role, you will be analyzing pricing data, preparing market share and revenue forecasts, and comparing the outcomes of different pricing strategies. To ensure success as a Sr. pricing analyst, you should possess sound knowledge of quantitative and qualitative data analysis methods and experience in a similar role. An accomplished Sr. pricing analyst is someone who can translate pricing data into actionable profit-enhancing strategies. ESSENTIAL DUTIES AND RESPONSIBILITIES: RPM end of month reporting based on brand/region analyzing sales trends & PVM effects on margin. End-of-month reporting based on select customer list defined by Pricing Manager/Pricing Director (including sales trends + PVM effects). End-of month reporting on Price Effect including validation/analysis against automated tools to ensure no errors across all reports. Weekly reporting for low-margin items/transactions across all Tremco brands/regions. Ad-hoc updates to Pricing Master for new items/item updates including all respective updates to price lists and GM% files. Build out all load files necessary for Ops team to execute. Includes maintenance for PowerBI price lists + necessary Sharepoint reference files. Assist Pricing Manager with data validation/testing regarding PowerBI models/dashboards and major IT projects (RPM One, Tremco Data Lake etc.) Ad-hoc development of PowerBI models/dashboards. Identify opportunities where PowerBI can be leveraged to automate manual Excel processes/reports. Execute ad-hoc queries in SQL and build respective Excel reports. Prepare and present internal customer facing analytics. Identify opportunities to improve/streamline existing reporting methods/processes to ensure optimal turnaround times and improve data quality. Keeping informed on pricing analysis methods and industry trends. Continued learning on current data science methodologies (Python, Databricks, etc. Analyzing competitor pricing and market trends to increase market share and profitability. EDUCATION: A Bachelor's degree in mathematics, statistics, finance, economics, or in a related field. A Master's degree in business administration will be advantageous. EXPERIENCE: A minimum of two to four years' experience as a pricing analyst in a similar industry. Experience in Chemical, Building Materials and/or Industrial Product industry experience preferred SKILLS AND ABILITIES: Proficiency in business intelligence (BI) software, such as PowerBI. Experience utilizing pricing in SAP advantageous. Experience working within Salesforce platform advantageous. In-depth knowledge of statistical methods and data analysis. Extensive experience in analyzing pricing strategies and forecasting revenue and market share. Experience in collaborating on pricing strategies with sales and marketing departments. Ability to keep abreast of industry trends and develop dynamic pricing tools. Advanced ability to present pricing analysis reports to relevant stakeholders. Excellent analytical and communication skills. OTHER QUALIFICATIONS: Ability to travel up to 15% ADDITIONAL INFORMATION: Primary Role (Summary) Improving data structures, integration between systems, data reliability/consistency for usage in pricing analytics Tracking Price realization, leakage and other related KPIs Supporting design and tracking of price approval process Supporting deal review and providing guidance and analytics on improving pricing/profitability Setting and tracking pricing policies, business rules and RACIs Skills: Behavioral & Technical: Profitability and growth orientation; does not hesitate in challenging sales force when required; Willingness and mindset to get into details Strong financial skills to utilize the decision support systems to interface with the sales and marketing organizations to drive specific action plans and programs Comfortable executing analyses independently in MS Excel Comfortable with independently accessing and running analyses on data directly from a database (e.g. via SQL) Experience with BI or dashboarding technologies (e.g. Tableau, Power BI) to independently build and manipulate fit-for-purpose reporting Key Accountabilities / Essential Functions of the Job: Supporting and refining existing price realization dashboards while spearheading monthly investigations into price performance and providing insights to Pricing Leader and other business leaders Identifying gaps in current data structures, closing these gaps in collaboration with other business functions Performing historical price analysis and transactional analysis to continuously track pricing discipline as well as potential for list price changes based on customer willingness to pay Support tracking of raw material inflation pass through and setting pricing targets working with Procurement, and Finance Support price list design changes and price setting analytics based on market dynamics, competitive intelligence, historical transactional data in collaboration with Product Marketing and Sales Support monitoring of pricing approvals and governance processes within the business The salary range for applicants in this position generally ranges between $75,000 and $90,000. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Benefits: Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Commission, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio Posted: 2026-09-09 15:11:54 -
Field Resource Foreman
JOB DESCRIPTION GENERAL PURPOSE OF THE JOB: The WTI Field Resource Foreman (Foreman) oversees and performs the safety, efficiency, and quality of the WTI field service business. Safety is our primary priority and will be embedded into every discussion, meeting, and project. As the clear and established leader of the WTI crew, the Foreman is focused on safety, crew management, and efficient execution of all WTI projects assigned within their respective region. It is the Foreman's responsibility to deliver timely service to all WTI customers and manage exposure to risks. ESSENTIAL DUTIES AND RESPONSIBILITIES: Conduct the daily onsite safety brief before the start of the WTI project with the Sales Rep, customer, and the WTI crew. Inspect and ensure all surroundings, equipment, and tools and identify and discuss any safety concerns. Complete the Daily Hazard Analysis form and submit it to the Supervisors as applicable. Foreman also ensures that all technicians complete Daily Hazard Analysis. Ensure all project communication is completed before the start of any WTI project. This includes but is not limited to communication with: WTI Field Resources Supervisor (Supervisor) daily and before starting new projects (ensure any/all communication with the Sales Reps is also shared with the Supervisor. Sales Rep weekly and/or as needed and before new projects. WTI crew members will discuss the scope of work, daily tasks, and the overall schedule. Customer/Client (as needed or required by the Sales Rep) daily and/or weekly. Efficient management of projects will include managing the crew's start and end times, daily productivity (hours, man-days, etc.), and ensuring tools and materials are available to complete the assigned project safely and efficiently. Complete the project per the approved scope of work or specification and after issuance by the Supervisor. Using a designated company-mandated reporting tool, the Foreman will complete an end-of-day and/or end-of-project walk-through to ensure the quality of workmanship and address any punch list items before leaving the job site. These items will include updates on work performed, materials consumed (T&M projects), and supplies purchased. Ensure all WTI Field Resources Reps (Field Reps) have a professional appearance and customer interaction while completing services for a customer. Responsible for ordering, tracking, and monitoring inventory and ensuring quarterly cycle counts are completed and submitted timely. Provide pricing for self-performing projects over $12,500. Submit all proposals of over $20,000 to the Supervisor for review and approval before submitting them to the GS Administrator for logging and distribution to the Sales Rep. Monitor and manage the Field Reps. Consult with the Supervisor to take appropriate steps or corrective measures to resolve employee work-related issues and necessary documentation. Work with the Supervisor to elevate the issues to HR as required. Coordinate with the Supervisor to create project schedules. Review time reports daily and make necessary corrections with the admin team. Attending all appropriate calls, meetings, and trainings. Perform any other duties and/or projects as required or assigned by the Supervisor or Regional Business Manager. EXPERIENCE: Minimum of five years of experience in the roofing industry. Must be thoroughly familiar with built-up, EPDM, PVC, and other forms of low-slope roofing systems, as well as metal and other steep-sloop roofing systems, and how to repair them properly. CERTIFICATES, LICENSES, REGISTRATIONS: 30-hour OSHA certification Registered Roof Observer (RRO) preferred but not required. OTHER SKILLS AND ABILITIES: Ability to travel out of town, including overnight stays. Must have reliable transportation and a valid driver's license. Ability to work weekends and/or holidays when needed. Ability to pass a pre-employment drug test. Ability to read, write, and speak English. The salary range for applicants in this position generally ranges between $55,000 and $75,000. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Springfield, Illinois Posted: 2026-09-09 15:11:53 -
Project Administrator
JOB DESCRIPTION BUILD YOUR FUTURE WHILE YOU HELP BUILD A BETTER WORLD! Tremco Construction Products Group brings together Roofing & Building Maintenance, Commercial Sealants, Waterproofing divisions, Tremco Barrier Solutions Inc., Dryvit, Nudura and Willseal brands, Prebuck LLC, Weatherproofing Technologies, Inc., Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America. If you're looking for a place to build a career and a life, with great benefits, advancement opportunity, technology, people and a commitment to a sustainable future, you've found it with us. PROJECT ADMINISTRATOR This is a 100% remote position that will support the Pacific Northwest and Pacific Southwest Regions of our Western Division. Preferred candidate will reside in the Mountain or Pacific time zone. GENERAL PURPOSE OF THE JOB: Project Administrators play a crucial role in ensuring the smooth execution and success of projects by providing essential administrative support in collaboration with Construction Managers and Field Representatives throughout various project phases. Specifically, the Business Operations Project Administrator is tasked with managing and coordinating all administrative aspects for an array of project types. This includes services like Patch and Repair, Patch and Repair Plus, General Contracting, Safety Patch and Repair, Building Envelope services, IAQ Services (both standalone and integrated with General Contracting), Job Site Inspections, Roofing Advisor Days, Consulting, Diagnostics, TRACE, ACT, and several emergency repair services. Key responsibilities encompass managing contractor payables, handling customer billings and receivables, ensuring compliance with standards and policies, applying book pricing and WTI documentation policies, overseeing commission and discounting policies, processing change orders, document management, financial data entry, and coordinating communications with Field Resources and Customers as required. Success in this role requires a high level of professionalism, strong organizational and prioritization skills, effective time management, and proficiency in relevant technology and software. Excellent interpersonal, written, and oral communication skills, coupled with meticulous attention to detail, accuracy, and a self-motivated attitude, are vital. The administrator must work effectively both independently and as part of a team, demonstrating the ability to collaborate with customers, field staff, and various internal stakeholders. This position involves regular interaction with multiple departments and teams, including General Services, General Contracting field operations, Field Representatives, Business Operations, IT, Finance/Accounting, Warranty, Tremcare, Sales, Accounts Payable, Credit, and Products. Given the dynamic and fast-paced nature of the role, flexibility and adaptability are essential, as the Project Administrator must navigate and respond to evolving project requirements and organizational needs. ESSENTIAL DUTIES AND RESPONSIBILITIES: The Project Administrator plays an integral role in the project lifecycle by validating, organizing, and ensuring compliance for all project documentation and financial processes. Upon receiving SAP Sales Order information from Customer Service Representatives, the administrator confirms all compliance requirements based on the WTI Price Book Policy/Procedures and Contract Management Policy, completing checklists to ensure data accuracy and completeness. Key responsibilities include managing critical project documents, such as vendor applications, subcontracts, purchase orders, Master Service Agreements, specifications, certificates of insurance, payment and performance bonds, prevailing wage rates, certified payroll reports, and state-specific compliance documentation. Project Administrators also facilitate and manage compliance submissions as needed. This role includes dispatching service orders to WTI Technicians, tailored to the specific project type. For General Contracting projects, the administrator provides WTI Superintendents with essential service orders and field report links to streamline daily reporting. Additionally, they maintain a comprehensive tracking spreadsheet for all projects, providing up-to-date project insights. Throughout each project, the Project Administrator coordinates with Construction Managers, Field Representatives, field technicians, customers, and management to ensure seamless operations. Project management duties cover tracking time and expenses, managing payables over 30 days, monitoring plan versus actual costs, verifying that all documents (such as bonds, insurance, and submittals) are submitted and approved, ensuring costs align with budget expectations, and validating all projects older than 90 days. This role includes preparing customer invoices with accuracy and timeliness, adhering to book pricing, time and materials (T&M), not-to-exceed (NTE) limits, lump-sum pricing, and customer-specific billing requirements. Project Administrators must understand and apply WTI's commission and discount policies when processing invoices across both General Contracting and General Services. They also review projects for job closeout audits, updating planned versus actual costs, and completing a job closing checklist for final approval. The Project Administrator is essential to ensuring that WTI's policies and procedures are followed precisely, maintaining accurate financial data for reporting at month-end, quarter-end, and fiscal year-end. This role requires a comprehensive understanding of WTI's operational, financial, and compliance frameworks to support accurate project execution and reporting. OTHER REQUIRED DUTIES: Project Management within the following technology platforms, Salesforce, e-Builder, RoofSnap, OLI, Smartsheet, WTI Quick Price App, Concur Hours to Day Conversions Calculating Market Price Weekly backlog meetings Review and resolve customer disputes Manage tech service expenses Assist with travel and hotel arrangements for maintenance and repair routes Coordinate larger supply and equipment purchases, arrange pickup, payments and cost allocation Coordinate material orders Review and process Readsoft workflow items Monitor daily, weekly and monthly reports Customer/Vendor Billing Portals Bi-weekly Project Review Meetings Payment Reconciliation Report low margin jobs Facilitate effective communication Process Implementation Reviews Assist in the preparation of project presentations, reports, and other project-related materials Problem Solving Conflict Management Escalation of concerns and issues Archive Project files as necessary Participate in special projects when necessary EDUCATION: Business Management/Administration or equivalent combination of education and experience. EXPERIENCE: 4-7 years related experience and/or training Project Administration/Management, Construction Accounting, Sarbanes-Oxley, public procurement or job order contract, prevailing wage OTHER SKILLS AND ABILITIES: Ability to handle multiple tasks, prioritize effectively, and manage time efficiently. Keeping records, documents, and project files organized and easily accessible. Excellent written and verbal communication skills to interact with team members, stakeholders, and clients. Proficiency in project management software, as well as standard office applications like Microsoft Office (Word, Excel, PowerPoint). Capacity to identify potential issues early on and proactively seek solutions or escalate problems as needed. Ability to think critically and adapt to changing project conditions. Understanding of project budgets, cost tracking, and financial reporting. Ability to assist with financial documentation, such as purchase orders, invoices, and expense reports. Strong time management skills to handle project deadlines and ensure timely task completion. Ability to manage time effectively in a fast-paced environment. Ability to work well with a diverse group of people, from team members to external vendors. Skill in fostering a collaborative, respectful work environment. Strong focus on meeting the needs of clients and stakeholders, understanding project requirements, and keeping them updated on project progress. Ability to resolve conflicts and keep the team working toward common goals. Handling disputes diplomatically and maintaining positive relationships among project team members. Knowledge of State prevailing wage, DB and SCAThe salary range for applicants in this position generally ranges between $57,000 and $66,000. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Benefits: Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Commission, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio Posted: 2026-09-09 15:11:25 -
Pricing Analyst (Sr)
JOB DESCRIPTION BUILD YOUR FUTURE WHILE YOU HELP BUILD A BETTER WORLD! Tremco CPG is an aggressive, growth-oriented company with revenues of over $1 billion. We are a world leader in solving complex waterproofing and roofing problems for our commercial, institutional, and industrial customers. If you're looking for a place to build a career, with great benefits, advancement opportunities, technology, people and a commitment to a sustainable future, you've found it with us. We are currently looking for an innovative Sr. pricing analyst to increase our business' competitiveness and profitability. In this role, you will be analyzing pricing data, preparing market share and revenue forecasts, and comparing the outcomes of different pricing strategies. To ensure success as a Sr. pricing analyst, you should possess sound knowledge of quantitative and qualitative data analysis methods and experience in a similar role. An accomplished Sr. pricing analyst is someone who can translate pricing data into actionable profit-enhancing strategies. ESSENTIAL DUTIES AND RESPONSIBILITIES: RPM end of month reporting based on brand/region analyzing sales trends & PVM effects on margin. End-of-month reporting based on select customer list defined by Pricing Manager/Pricing Director (including sales trends + PVM effects). End-of month reporting on Price Effect including validation/analysis against automated tools to ensure no errors across all reports. Weekly reporting for low-margin items/transactions across all Tremco brands/regions. Ad-hoc updates to Pricing Master for new items/item updates including all respective updates to price lists and GM% files. Build out all load files necessary for Ops team to execute. Includes maintenance for PowerBI price lists + necessary Sharepoint reference files. Assist Pricing Manager with data validation/testing regarding PowerBI models/dashboards and major IT projects (RPM One, Tremco Data Lake etc.) Ad-hoc development of PowerBI models/dashboards. Identify opportunities where PowerBI can be leveraged to automate manual Excel processes/reports. Execute ad-hoc queries in SQL and build respective Excel reports. Prepare and present internal customer facing analytics. Identify opportunities to improve/streamline existing reporting methods/processes to ensure optimal turnaround times and improve data quality. Keeping informed on pricing analysis methods and industry trends. Continued learning on current data science methodologies (Python, Databricks, etc. Analyzing competitor pricing and market trends to increase market share and profitability. EDUCATION: A Bachelor's degree in mathematics, statistics, finance, economics, or in a related field. A Master's degree in business administration will be advantageous. EXPERIENCE: A minimum of two to four years' experience as a pricing analyst in a similar industry. Experience in Chemical, Building Materials and/or Industrial Product industry experience preferred SKILLS AND ABILITIES: Proficiency in business intelligence (BI) software, such as PowerBI. Experience utilizing pricing in SAP advantageous. Experience working within Salesforce platform advantageous. In-depth knowledge of statistical methods and data analysis. Extensive experience in analyzing pricing strategies and forecasting revenue and market share. Experience in collaborating on pricing strategies with sales and marketing departments. Ability to keep abreast of industry trends and develop dynamic pricing tools. Advanced ability to present pricing analysis reports to relevant stakeholders. Excellent analytical and communication skills. OTHER QUALIFICATIONS: Ability to travel up to 15% ADDITIONAL INFORMATION: Primary Role (Summary) Improving data structures, integration between systems, data reliability/consistency for usage in pricing analytics Tracking Price realization, leakage and other related KPIs Supporting design and tracking of price approval process Supporting deal review and providing guidance and analytics on improving pricing/profitability Setting and tracking pricing policies, business rules and RACIs Skills: Behavioral & Technical: Profitability and growth orientation; does not hesitate in challenging sales force when required; Willingness and mindset to get into details Strong financial skills to utilize the decision support systems to interface with the sales and marketing organizations to drive specific action plans and programs Comfortable executing analyses independently in MS Excel Comfortable with independently accessing and running analyses on data directly from a database (e.g. via SQL) Experience with BI or dashboarding technologies (e.g. Tableau, Power BI) to independently build and manipulate fit-for-purpose reporting Key Accountabilities / Essential Functions of the Job: Supporting and refining existing price realization dashboards while spearheading monthly investigations into price performance and providing insights to Pricing Leader and other business leaders Identifying gaps in current data structures, closing these gaps in collaboration with other business functions Performing historical price analysis and transactional analysis to continuously track pricing discipline as well as potential for list price changes based on customer willingness to pay Support tracking of raw material inflation pass through and setting pricing targets working with Procurement, and Finance Support price list design changes and price setting analytics based on market dynamics, competitive intelligence, historical transactional data in collaboration with Product Marketing and Sales Support monitoring of pricing approvals and governance processes within the business The salary range for applicants in this position generally ranges between $75,000 and $90,000. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Benefits: Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Commission, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio Posted: 2026-09-09 15:11:25 -
Sanitation Worker
JOB DESCRIPTION Basic Function and Scope of Responsibilities: Sanitation is responsible for all activities involved in maintaining the cleanliness and food safe environment of the Processing facility, surrounding area and equipment. Reports to the Production supervisor and receives direction concerning sanitation activities. Perform daily sanitation of all processing lines and mixing rooms. Ensure food safety and food defense in the plant. Promotes a safe work environment through knowledge of the sanitation program and commitment to a safe workplace for all. Ensures that staff are informed of corporate safety requirements and that safety is a priority in day to day functions. Develops and implements new methods, procedures, and systems to improve quality and food safety performance, determine and implement corrective actions. Follow best practices for safety, SDS guidelines, and the proper use of personal protective equipment. Responsible for filling out daily sanitation logs, performance reports and shift paperwork. Regularly complete training in methods of improving sanitation processes Makes certain that all areas are kept clean of waste, debris, and liquids to avoid safety hazards Ensures that at the end of the shift all documentation pertinent to sanitation. Maintains effective communications between the Manager and shift supervisors. Other duties as assigned by manager. Education Requirements: High School Diploma or equivalent Must possess good reading, writing and math skills. Must always be safety conscious. Must be able to lift up to 60 lbs. Must be self-directed and able to work without close supervision Willing and able to work overtime as needed Hardworking, dependable, and safety conscious Bilingual - English/Spanish is preferred Willingness to work varied shifts, including nights, weekends and holidays Strong quantitative skills, interpersonal skills and the ability to think critically. Ability to effectively plan, organize and prioritize work. Read and understand chemical labels. Read and understand HACCP along with SQF and OSHA requirements. Demonstrated ability to motivate and train employees Training, Skills, Knowledge and/or Experience: Must possess good reading, writing and math skills. Must always be safety conscious. Must be able to lift up to 60 lbs. Must be self-directed and able to work without close supervision Willing and able to work overtime as needed Hardworking, dependable, and safety conscious Bilingual - English/Spanish is preferred Willingness to work varied shifts, including nights, weekends and holidays Strong quantitative skills, interpersonal skills and the ability to think critically. Ability to effectively plan, organize and prioritize work. Read and understand chemical labels. Read and understand HACCP along with SQF and OSHA requirements. Position Reports To: Production Supervisor Apply for this ad Online! ....Read more...
Type: Permanent Location: Elgin, Illinois Posted: 2026-09-07 23:11:50 -
Sanitation Worker
JOB DESCRIPTION Basic Function and Scope of Responsibilities: Sanitation is responsible for all activities involved in maintaining the cleanliness and food safe environment of the Processing facility, surrounding area and equipment. Reports to the Production supervisor and receives direction concerning sanitation activities. Perform daily sanitation of all processing lines and mixing rooms. Ensure food safety and food defense in the plant. Promotes a safe work environment through knowledge of the sanitation program and commitment to a safe workplace for all. Ensures that staff are informed of corporate safety requirements and that safety is a priority in day to day functions. Develops and implements new methods, procedures, and systems to improve quality and food safety performance, determine and implement corrective actions. Follow best practices for safety, SDS guidelines, and the proper use of personal protective equipment. Responsible for filling out daily sanitation logs, performance reports and shift paperwork. Regularly complete training in methods of improving sanitation processes Makes certain that all areas are kept clean of waste, debris, and liquids to avoid safety hazards Ensures that at the end of the shift all documentation pertinent to sanitation. Maintains effective communications between the Manager and shift supervisors. Other duties as assigned by manager. Education Requirements: High School Diploma or equivalent Must possess good reading, writing and math skills. Must always be safety conscious. Must be able to lift up to 60 lbs. Must be self-directed and able to work without close supervision Willing and able to work overtime as needed Hardworking, dependable, and safety conscious Bilingual - English/Spanish is preferred Willingness to work varied shifts, including nights, weekends and holidays Strong quantitative skills, interpersonal skills and the ability to think critically. Ability to effectively plan, organize and prioritize work. Read and understand chemical labels. Read and understand HACCP along with SQF and OSHA requirements. Demonstrated ability to motivate and train employees Training, Skills, Knowledge and/or Experience: Must possess good reading, writing and math skills. Must always be safety conscious. Must be able to lift up to 60 lbs. Must be self-directed and able to work without close supervision Willing and able to work overtime as needed Hardworking, dependable, and safety conscious Bilingual - English/Spanish is preferred Willingness to work varied shifts, including nights, weekends and holidays Strong quantitative skills, interpersonal skills and the ability to think critically. Ability to effectively plan, organize and prioritize work. Read and understand chemical labels. Read and understand HACCP along with SQF and OSHA requirements. Position Reports To: Production Supervisor Apply for this ad Online! ....Read more...
Type: Permanent Location: Elgin, Illinois Posted: 2026-09-07 23:11:47 -
Sanitation Worker
JOB DESCRIPTION Basic Function and Scope of Responsibilities: Sanitation is responsible for all activities involved in maintaining the cleanliness and food safe environment of the Processing facility, surrounding area and equipment. Reports to the Production supervisor and receives direction concerning sanitation activities. Perform daily sanitation of all processing lines and mixing rooms. Ensure food safety and food defense in the plant. Promotes a safe work environment through knowledge of the sanitation program and commitment to a safe workplace for all. Ensures that staff are informed of corporate safety requirements and that safety is a priority in day to day functions. Develops and implements new methods, procedures, and systems to improve quality and food safety performance, determine and implement corrective actions. Follow best practices for safety, SDS guidelines, and the proper use of personal protective equipment. Responsible for filling out daily sanitation logs, performance reports and shift paperwork. Regularly complete training in methods of improving sanitation processes Makes certain that all areas are kept clean of waste, debris, and liquids to avoid safety hazards Ensures that at the end of the shift all documentation pertinent to sanitation. Maintains effective communications between the Manager and shift supervisors. Other duties as assigned by manager. Education Requirements: High School Diploma or equivalent Must possess good reading, writing and math skills. Must always be safety conscious. Must be able to lift up to 60 lbs. Must be self-directed and able to work without close supervision Willing and able to work overtime as needed Hardworking, dependable, and safety conscious Bilingual - English/Spanish is preferred Willingness to work varied shifts, including nights, weekends and holidays Strong quantitative skills, interpersonal skills and the ability to think critically. Ability to effectively plan, organize and prioritize work. Read and understand chemical labels. Read and understand HACCP along with SQF and OSHA requirements. Demonstrated ability to motivate and train employees Training, Skills, Knowledge and/or Experience: Must possess good reading, writing and math skills. Must always be safety conscious. Must be able to lift up to 60 lbs. Must be self-directed and able to work without close supervision Willing and able to work overtime as needed Hardworking, dependable, and safety conscious Bilingual - English/Spanish is preferred Willingness to work varied shifts, including nights, weekends and holidays Strong quantitative skills, interpersonal skills and the ability to think critically. Ability to effectively plan, organize and prioritize work. Read and understand chemical labels. Read and understand HACCP along with SQF and OSHA requirements. Position Reports To: Production Supervisor Apply for this ad Online! ....Read more...
Type: Permanent Location: Elgin, Illinois Posted: 2026-09-07 23:11:45 -
Plant Manager
JOB DESCRIPTION Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc. and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems. With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects. Tremco is currently looking for a Plant Manager in our Columbus, GA facility. The Plant Manager manages daily production operations to meet Safety, Quality, Service and Cost objectives. Ensures supply chain execution in the provision of finished goods. Establishes and/or executes operating policies and procedures to achieve EH&S standards, compliance, production schedules, product quality standards, customer expectations/satisfaction and operational cost targets. TREMCO'S EXPECTATIONS FOR ALL LEADERS: Embodies the company's core values of transparency, trust, and respect by demonstrating integrity, commitment, responsible entrepreneurship, and moral courage. Applies the company's policies and adheres to processes to ensure compliance and organizational best practices. Demonstrates a commitment to diversity, equity, and inclusion in all areas of responsibility such as hiring and promotion decisions. Effectively and efficiently onboards new employees. Conducts annual performance evaluations and provides ongoing performance feedback, maintaining clear and timely documentation. Coaches and manages employees using the company's philosophy and tools to ensure talent is developed and retained. Constructs succession plans to ensure sustainability and continuity of area of responsibility. ESSENTIAL DUTIES AND RESPONSIBILITIES: Responsible for the safety of staff, visitors, equipment, and facility in accordance with the North American Manufacturing Safety Program. Ensures execution and compliance with EHS requirements. Leads the manufacturing team to excellent performance through a structured lean manufacturing system (MS-168) with the use of Operational Excellence tools. Ensures that staff is competent to perform all required functions. Interfaces with senior management to ensure manufacturing goals are consistent with strategic direction. Responsible for managing employees, either directly or indirectly, that are assigned to the site. Determines organizational objectives and defines structure. Undertakes long and short-term planning and supervision of projects including management of the capital process for the site. Oversees, either directly or indirectly, investigations of labor, cost and process variances and deviations. Participates in annual budget preparation and is responsible for managing results to the budget. Ensures team members achieve their potential and the teams meet their goals. Demonstrates a commitment to diversity in hiring and promotion decisions. Effectively and efficiently onboards new employees. Conducts periodic performance evaluations and provides ongoing performance feedback, maintaining clear and timely documentation. Coaches and develops employees to ensure talent is developed and retained. EDUCATION REQUIREMENT: The educational minimal requirement for the Plant Manager position is a Bachelors' Degree. EXPERIENCE REQUIREMENT: A minimum of three years of management experience in a comparably sized manufacturing operation with similar products, manufacturing technologies, ERP systems, and operational processes. Experience leading the transfer, startup, or integration of manufacturing operations between facilities is strongly preferred. OTHER SKILLS, ABILITIES, AND QUALIFICATIONS: SAP/ERP experience Lean methodologies Ability to apply excel, word, and SAP applications to daily job responsibilities. PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 25 lbs. BENEFITS AND COMPENSATION: The salary range for applicants in this position generally ranges between $150,000 - $200,000. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia Posted: 2026-09-06 15:12:05 -
Plant Manager
JOB DESCRIPTION Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc. and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems. With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects. Tremco is currently looking for a Plant Manager in our Columbus, GA facility. The Plant Manager manages daily production operations to meet Safety, Quality, Service and Cost objectives. Ensures supply chain execution in the provision of finished goods. Establishes and/or executes operating policies and procedures to achieve EH&S standards, compliance, production schedules, product quality standards, customer expectations/satisfaction and operational cost targets. TREMCO'S EXPECTATIONS FOR ALL LEADERS: Embodies the company's core values of transparency, trust, and respect by demonstrating integrity, commitment, responsible entrepreneurship, and moral courage. Applies the company's policies and adheres to processes to ensure compliance and organizational best practices. Demonstrates a commitment to diversity, equity, and inclusion in all areas of responsibility such as hiring and promotion decisions. Effectively and efficiently onboards new employees. Conducts annual performance evaluations and provides ongoing performance feedback, maintaining clear and timely documentation. Coaches and manages employees using the company's philosophy and tools to ensure talent is developed and retained. Constructs succession plans to ensure sustainability and continuity of area of responsibility. ESSENTIAL DUTIES AND RESPONSIBILITIES: Responsible for the safety of staff, visitors, equipment, and facility in accordance with the North American Manufacturing Safety Program. Ensures execution and compliance with EHS requirements. Leads the manufacturing team to excellent performance through a structured lean manufacturing system (MS-168) with the use of Operational Excellence tools. Ensures that staff is competent to perform all required functions. Interfaces with senior management to ensure manufacturing goals are consistent with strategic direction. Responsible for managing employees, either directly or indirectly, that are assigned to the site. Determines organizational objectives and defines structure. Undertakes long and short-term planning and supervision of projects including management of the capital process for the site. Oversees, either directly or indirectly, investigations of labor, cost and process variances and deviations. Participates in annual budget preparation and is responsible for managing results to the budget. Ensures team members achieve their potential and the teams meet their goals. Demonstrates a commitment to diversity in hiring and promotion decisions. Effectively and efficiently onboards new employees. Conducts periodic performance evaluations and provides ongoing performance feedback, maintaining clear and timely documentation. Coaches and develops employees to ensure talent is developed and retained. EDUCATION REQUIREMENT: The educational minimal requirement for the Plant Manager position is a Bachelors' Degree. EXPERIENCE REQUIREMENT: A minimum of three years of management experience in a comparably sized manufacturing operation with similar products, manufacturing technologies, ERP systems, and operational processes. Experience leading the transfer, startup, or integration of manufacturing operations between facilities is strongly preferred. OTHER SKILLS, ABILITIES, AND QUALIFICATIONS: SAP/ERP experience Lean methodologies Ability to apply excel, word, and SAP applications to daily job responsibilities. PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 25 lbs. BENEFITS AND COMPENSATION: The salary range for applicants in this position generally ranges between $150,000 - $200,000. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia Posted: 2026-09-06 15:11:24
-
3rd Shift Batch Maker
JOB DESCRIPTION RPM Industrial Coatings Group in Hudson, NC is looking for 3rd Shift Batch Makers (Shift Differential). $1,000 Sign-On Bonus! GENERAL SUMMARY Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods. This position also requires application and monitoring of established quality procedures and me ....Read more...
Type: Permanent Location: Hudson, North Carolina Posted: 2026-09-10 15:12:22 -
2nd Shift QC Lab Technician
JOB DESCRIPTION RPM Industrial Coatings Group in Hudson, NC is looking for 2nd Shift QC Technician (Shift Differential). $1,000 Sign-On Bonus! GENERAL SUMMARY: Assists with application and monitoring of established quality procedures and methods for production batches and new raw materials. Compiles, tabulates and summarizes QC data for analysis. Prepares and communicates variables and deviations from prescribed standards of quality. Maintains statistical records having to do with qua ....Read more...
Type: Permanent Location: Hudson, North Carolina Posted: 2026-09-10 15:12:09 -
2nd Shift QC Lab Technician
JOB DESCRIPTION RPM Industrial Coatings Group in Hudson, NC is looking for 2nd Shift QC Technician (Shift Differential). $1,000 Sign-On Bonus! GENERAL SUMMARY: Assists with application and monitoring of established quality procedures and methods for production batches and new raw materials. Compiles, tabulates and summarizes QC data for analysis. Prepares and communicates variables and deviations from prescribed standards of quality. Maintains statistical records having to do with qua ....Read more...
Type: Permanent Location: Hudson, North Carolina Posted: 2026-09-10 15:12:00 -
Corporate Manager - EH&S - Arnette Polymers, LLC
JOB DESCRIPTION Position Summary: This position is responsible for developing, instituting, and overseeing all aspects of Environmental, Health, Safety and Corporate Compliance. This includes but is not limited to ensuring the company complies with all federal and state health, safety and environmental laws, regulations and reporting standards. Essential Functions: Works with all personnel at the facility to make sure all safety and environmental regulations are met and are being follo ....Read more...
Type: Permanent Location: Richmond, Missouri Posted: 2026-09-10 15:12:00 -
2nd Shift QC Lab Technician
JOB DESCRIPTION RPM Industrial Coatings Group in Hudson, NC is looking for 2nd Shift QC Technician (Shift Differential). $1,000 Sign-On Bonus! GENERAL SUMMARY: Assists with application and monitoring of established quality procedures and methods for production batches and new raw materials. Compiles, tabulates and summarizes QC data for analysis. Prepares and communicates variables and deviations from prescribed standards of quality. Maintains statistical records having to do with qua ....Read more...
Type: Permanent Location: Hudson, North Carolina Posted: 2026-09-10 15:11:58 -
3rd Shift Batch Maker
JOB DESCRIPTION RPM Industrial Coatings Group in Hudson, NC is looking for 3rd Shift Batch Makers (Shift Differential). $1,000 Sign-On Bonus! GENERAL SUMMARY Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods. This position also requires application and monitoring of established quality procedures and me ....Read more...
Type: Permanent Location: Hudson, North Carolina Posted: 2026-09-10 15:11:24 -
Corporate Manager - EH&S - Arnette Polymers, LLC
JOB DESCRIPTION Position Summary: This position is responsible for developing, instituting, and overseeing all aspects of Environmental, Health, Safety and Corporate Compliance. This includes but is not limited to ensuring the company complies with all federal and state health, safety and environmental laws, regulations and reporting standards. Essential Functions: Works with all personnel at the facility to make sure all safety and environmental regulations are met and are being follo ....Read more...
Type: Permanent Location: Richmond, Missouri Posted: 2026-09-10 15:11:22 -
Nursery Manager / Deputy Manager
An opportunity has arisen for a Nursery Manager / Deputy Manager to join a childcare provider offering quality early years education, with a focus on EYFS development, outdoor learning and Forest School activities. As a Nursery Manager / Deputy Manager, you will be leading the nurserys day-to-day operation, supporting the team and ensuring high standards of care, learning and development. This full-time permanent role offers a salary range of £35,000 - £42,000 which is negotiable ....Read more...
Type: Permanent Location: Alton, Liss, England Start: Duration: Salary / Rate: £42000 Per Annum Posted: 2026-09-10 11:18:54 -
Specification Specialist I
JOB DESCRIPTION GENERAL PURPOSE OF THE JOB: The Specification Specialist reviews and develops project specifications and Scopes of Work to ensure compliance with local building codes, industry standards, and company standards, using their expertise to select appropriate items based on project requirements. We are looking for an Specification Specialist to support our Pacific Northwest Region. ESSENTIAL DUTIES AND RESPONSIBILITIES: Develop AIA MasterFormat specifications that comply with ....Read more...
Type: Permanent Location: Seattle, Washington Posted: 2026-09-09 23:13:18 -
Project Administrator
JOB DESCRIPTION BUILD YOUR FUTURE WHILE YOU HELP BUILD A BETTER WORLD! Tremco Construction Products Group brings together Roofing & Building Maintenance, Commercial Sealants, Waterproofing divisions, Tremco Barrier Solutions Inc., Dryvit, Nudura and Willseal brands, Prebuck LLC, Weatherproofing Technologies, Inc., Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/techn ....Read more...
Type: Permanent Location: Beachwood, Ohio Posted: 2026-09-09 23:13:10 -
Field Resource Foreman
JOB DESCRIPTION GENERAL PURPOSE OF THE JOB: The WTI Field Resource Foreman (Foreman) oversees and performs the safety, efficiency, and quality of the WTI field service business. Safety is our primary priority and will be embedded into every discussion, meeting, and project. As the clear and established leader of the WTI crew, the Foreman is focused on safety, crew management, and efficient execution of all WTI projects assigned within their respective region. It is the Foreman's responsibi ....Read more...
Type: Permanent Location: Springfield, Illinois Posted: 2026-09-09 23:12:26 -
Specification Specialist I
JOB DESCRIPTION GENERAL PURPOSE OF THE JOB: The Specification Specialist reviews and develops project specifications and Scopes of Work to ensure compliance with local building codes, industry standards, and company standards, using their expertise to select appropriate items based on project requirements. We are looking for an Specification Specialist to support our Pacific Northwest Region. ESSENTIAL DUTIES AND RESPONSIBILITIES: Develop AIA MasterFormat specifications that comply with ....Read more...
Type: Permanent Location: Seattle, Washington Posted: 2026-09-09 23:11:59 -
Nursery Manager / Deputy Manager
An opportunity has arisen for a Nursery Manager / Deputy Manager to join a childcare provider offering quality early years education, with a focus on EYFS development, outdoor learning and Forest School activities. As a Nursery Manager / Deputy Manager, you will be deading the nurserys day-to-day operation, supporting the team and ensuring high standards of care, learning and development. This full-time permanent role offers a salary range of £35,000 - £42,000 which is negotiable ....Read more...
Type: Permanent Location: Alton, Liss, England Start: Duration: Salary / Rate: £42000 Per Annum Posted: 2026-09-09 17:40:40 -
Construction Management Associate
JOB DESCRIPTION GENERAL PURPOSE OF THE JOB: The Construction Management Associate is responsible for assisting the Construction Manager in all aspects associated with a construction-related project. This will include but is not limited to, General Contracting projects, larger-scale Contracting Patch and Repair Projects, TremCares, etc. This will involve working with the Construction Manager, Project Superintendent, or WTI Technician assigned to the project to ensure the project is effectiv ....Read more...
Type: Permanent Location: Seattle, Washington Posted: 2026-09-09 15:13:43 -
Sanitation Worker
JOB DESCRIPTION Basic Function and Scope of Responsibilities: Sanitation is responsible for all activities involved in maintaining the cleanliness and food safe environment of the Processing facility, surrounding area and equipment. Reports to the Production supervisor and receives direction concerning sanitation activities. Perform daily sanitation of all processing lines and mixing rooms. Ensure food safety and food defense in the plant. Promotes a safe work environment through knowledge ....Read more...
Type: Permanent Location: Elgin, Illinois Posted: 2026-09-09 15:13:39 -
Project Administrator
JOB DESCRIPTION BUILD YOUR FUTURE WHILE YOU HELP BUILD A BETTER WORLD! Tremco Construction Products Group brings together Roofing & Building Maintenance, Commercial Sealants, Waterproofing divisions, Tremco Barrier Solutions Inc., Dryvit, Nudura and Willseal brands, Prebuck LLC, Weatherproofing Technologies, Inc., Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/techn ....Read more...
Type: Permanent Location: Beachwood, Ohio Posted: 2026-09-09 15:13:16 -
Pricing Analyst (Sr)
JOB DESCRIPTION BUILD YOUR FUTURE WHILE YOU HELP BUILD A BETTER WORLD! Tremco CPG is an aggressive, growth-oriented company with revenues of over $1 billion. We are a world leader in solving complex waterproofing and roofing problems for our commercial, institutional, and industrial customers. If you're looking for a place to build a career, with great benefits, advancement opportunities, technology, people and a commitment to a sustainable future, you've found it with us. We are curre ....Read more...
Type: Permanent Location: Beachwood, Ohio Posted: 2026-09-09 15:11:54 -
Field Resource Foreman
JOB DESCRIPTION GENERAL PURPOSE OF THE JOB: The WTI Field Resource Foreman (Foreman) oversees and performs the safety, efficiency, and quality of the WTI field service business. Safety is our primary priority and will be embedded into every discussion, meeting, and project. As the clear and established leader of the WTI crew, the Foreman is focused on safety, crew management, and efficient execution of all WTI projects assigned within their respective region. It is the Foreman's responsibi ....Read more...
Type: Permanent Location: Springfield, Illinois Posted: 2026-09-09 15:11:53 -
Project Administrator
JOB DESCRIPTION BUILD YOUR FUTURE WHILE YOU HELP BUILD A BETTER WORLD! Tremco Construction Products Group brings together Roofing & Building Maintenance, Commercial Sealants, Waterproofing divisions, Tremco Barrier Solutions Inc., Dryvit, Nudura and Willseal brands, Prebuck LLC, Weatherproofing Technologies, Inc., Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/techn ....Read more...
Type: Permanent Location: Beachwood, Ohio Posted: 2026-09-09 15:11:25 -
Pricing Analyst (Sr)
JOB DESCRIPTION BUILD YOUR FUTURE WHILE YOU HELP BUILD A BETTER WORLD! Tremco CPG is an aggressive, growth-oriented company with revenues of over $1 billion. We are a world leader in solving complex waterproofing and roofing problems for our commercial, institutional, and industrial customers. If you're looking for a place to build a career, with great benefits, advancement opportunities, technology, people and a commitment to a sustainable future, you've found it with us. We are curre ....Read more...
Type: Permanent Location: Beachwood, Ohio Posted: 2026-09-09 15:11:25 -
Sanitation Worker
JOB DESCRIPTION Basic Function and Scope of Responsibilities: Sanitation is responsible for all activities involved in maintaining the cleanliness and food safe environment of the Processing facility, surrounding area and equipment. Reports to the Production supervisor and receives direction concerning sanitation activities. Perform daily sanitation of all processing lines and mixing rooms. Ensure food safety and food defense in the plant. Promotes a safe work environment through knowledge ....Read more...
Type: Permanent Location: Elgin, Illinois Posted: 2026-09-07 23:11:50 -
Sanitation Worker
JOB DESCRIPTION Basic Function and Scope of Responsibilities: Sanitation is responsible for all activities involved in maintaining the cleanliness and food safe environment of the Processing facility, surrounding area and equipment. Reports to the Production supervisor and receives direction concerning sanitation activities. Perform daily sanitation of all processing lines and mixing rooms. Ensure food safety and food defense in the plant. Promotes a safe work environment through knowledge ....Read more...
Type: Permanent Location: Elgin, Illinois Posted: 2026-09-07 23:11:47 -
Sanitation Worker
JOB DESCRIPTION Basic Function and Scope of Responsibilities: Sanitation is responsible for all activities involved in maintaining the cleanliness and food safe environment of the Processing facility, surrounding area and equipment. Reports to the Production supervisor and receives direction concerning sanitation activities. Perform daily sanitation of all processing lines and mixing rooms. Ensure food safety and food defense in the plant. Promotes a safe work environment through knowledge ....Read more...
Type: Permanent Location: Elgin, Illinois Posted: 2026-09-07 23:11:45 -
Plant Manager
JOB DESCRIPTION Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc. and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems. With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supporte ....Read more...
Type: Permanent Location: Columbus, Georgia Posted: 2026-09-06 15:12:05 -
Plant Manager
JOB DESCRIPTION Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc. and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems. With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supporte ....Read more...
Type: Permanent Location: Columbus, Georgia Posted: 2026-09-06 15:11:24