-
Electronic Production Technician to work on low volume, high value Electronic Systems manufacturing principally with hand tools including micro soldering, test, fault finding and repair of electrical and electronic systems and components.
You will integrate and test electrical and electromechanical tools and take responsibility for the test equipment used to test tools.
Experience and skills required
Electronic lab equipment including: Multi-meter, Oscilloscope, Low Voltage Power Supplies, High Voltage Power Supply, measurement, test and debugging of electromechanical assemblies.
Electrical or Electronic engineering qualification (e.g ONC, HNC, HND, NVQ Level 2)
Proven ability to work successfully within design constraints.
Electronic tools and general test equipment competence.
Producing deliverable items from full drawing packs to relevant IPC standards.
Role responsibilities
Good electronic technician skills: testing, low and high voltage experience, basic soldering, crimping, and assembly.
Fault finding and rectification at system and component level. ....Read more...
Type: Permanent Location: Stroud, England
Start: ASAP
Duration: Permanent
Salary / Rate: £36000 - £42000 Per Annum None
Posted: 2026-03-13 15:34:10
-
Electrical Assembly Technician required ideally with IPC certification (IPC 620 or J-Std ideal) to work on PCB component soldering, micro-soldering, crimping and general wiring on the assembly of high value, low volume rugged devices.
You will work to schematics, following routings, testing and taking performance measurements with a PC based system.
This role will be building systems and various components of complex drilling tools that have to perform within tight tolerances.
Key Skills.
Soldering
Crimping
Wiring
Electronics equipment
Test and build equipment
Safety equipment ....Read more...
Type: Permanent Location: Stroud, England
Start: ASAP
Duration: Permanent
Salary / Rate: £32000 - £36000 Per Annum None
Posted: 2026-03-13 15:32:44
-
A Field Service Engineer is sought to join a growing engineering team in Cork, Ireland, contributing to the installation, service, commissioning, and technical support of advanced electronics manufacturing equipment across customer sites.
The Field Service Engineer, Cork, Ireland, will be expected to develop your understanding in the field, learning from peers and senior engineers in technical areas and industry best practices.
This may include installation and commissioning of SMT equipment, fault diagnosis, preventative maintenance, calibration, and applications support within electronics manufacturing environments.
Responsibilities include:
Provide installation, service, repair, calibration, and preventative maintenance of equipment at customer sites.
Commission equipment at customer facilities and support final release into production environments.
Assess the suitability of equipment and processes prior to customer purchase where required.
Diagnose faults and resolve technical issues relating to equipment and production processes.
Provide technical expertise and support to customers and internal stakeholders.
Maintain accurate documentation and service records associated with installations, maintenance, and repairs.
Identify equipment and process-related issues that could impact successful installation, training, or commissioning.
Support customer training and applications assistance where required.
Attend meetings, conferences, trade shows, and technical training courses as necessary.
Ensure full compliance with company policies, procedures, and operational standards.
Key skills & experience:
Degree in Mechanical or Electrical Engineering, or equivalent industry experience.
Minimum of five years' experience within electronic engineering or electronics manufacturing environments.
Experience installing, servicing, repairing, and maintaining industrial or manufacturing equipment.
Knowledge of SMT and electronics manufacturing processes such as printing, dispensing, pick-and-place, reflow, vapour phase, selective and wave soldering, coating, cleaning, testing, and inspection.
Ability to interpret electrical and mechanical engineering drawings.
Strong IT skills including knowledge of PC systems, networking, or SQL databases.
Strong practical mechanical and technical problem-solving abilities.
Highly organised, self-motivated, and able to work independently in field-based environments.
Full driving licence and willingness to travel across Ireland and occasionally the UK.
How to apply:
Apply now for the Field Service Engineer role in Cork, Ireland.
Send your CV to adighton@redlinegroup.Com or call Adam on 01582878821. ....Read more...
Type: Permanent Location: Cork, Republic of Ireland
Start: ASAP
Salary / Rate: £35000 - £42000 per annum
Posted: 2026-03-13 15:32:31
-
Electronic Manufacturing Technician required to test, fault find and repair various electrical or electronic systems and components of rotary steerable systems, Measurement While Drilling tools, Specialised Measurement tools and Rechargeable Batteries for Downhole use and power source products.
Experience
Electronic technician experience of testing, low and high voltage experience, basic soldering, crimping, and assembly.
Basic fault finding and rectification at system and component level.
Further education in Electrical or Electronic engineering (ONC, HNC, HND, NVQ Level 2)
Responsibilities
Producing deliverable items from full drawing packs with minimal additional help to relevant IPC standards.
....Read more...
Type: Permanent Location: Stroud, England
Start: ASAP
Duration: Permanent
Salary / Rate: £30000 - £36000 Per Annum None
Posted: 2026-03-13 15:30:08
-
Field Service Engineer
Electrical / Electronics & Mechanical
Location: Shropshire / Black Country / Midlands / CentralPackage: Circa (£45k ££neg) + Vehicle f/expensed + Benefits + Career Prog + Continuous Training + Development + Private Health Care
Join a leading Class A OEM specialising in designing, developing, and manufacturing world-class precision machine tools for the manufacturing sector.
As technology advances rapidly, we have an exciting opportunity for a highly skilled electrical/electronics professional to contribute to the design, development, and fault-finding processes on exceptionally complex, electrically powered precision machine tools.
What We're Looking For:
Electrical fault-finding expertise - Priority
Proficiency in reading electrical schematic drawings
Strong IT skills (networking, fault-finding)
Understanding of mechanical systems and machinery and Precision Engineering
Experience in test and commissioning
Understanding of PLC controls and control functionalities
Knowledge of installing full turnkey lines, interconnecting several pieces of machinery to form a production line ensuring all safety measures and meeting industry standards & conformity
Desired Skills:
PLC programming experience (Beckhoff, Siemens, Allen Bradley, Fanuc, ABB)
Ability to design electrical circuits on CAD
Knowledge of UKCA / CE standards
Understanding of Mechanical Applications and work with Mechanical Machinery
Soft Skills:
Can-do attitude
Precise attention to detail
Problem-solving expertise for complex issues
Here's the future vision….
Based at our new UK HQ centrally located, this role offers tremendous potential and serves as a springboard into higher positions within our international manufacturing business.
Ready to elevate your career? Apply today and join a team that's pushing the boundaries of precision engineering!
Meet the employer:
Short 20 min bite sized meet the employer sessions will be organised with our exclusive recruitment partner, Glen Shepherd.
Please get in touch via CV submission & arrange your pre-interview session NOW.
Tel 07977 266309 /
JOB REF: 4312GS
Glen Callum Associates is committed to creating diverse and inclusive workplaces.
We welcome applications from all qualified candidates regardless of gender, age, ethnicity, disability, sexual orientation, or background.
We believe that a variety of perspectives makes a team stronger and a workplace better.
If you need any adjustments during the recruitment process, please let us know - we're here to support you. ....Read more...
Type: Permanent Location: Dudley, England
Start: 13/04/2026
Salary / Rate: £45000 - £50000 per annum + +vehicle f/expensed, private health care
Posted: 2026-03-13 13:00:02
-
Field Service Engineer
Electrical / Electronics & Mechanical
Location: Shropshire / Black Country / Midlands / CentralPackage: Circa (£45k ££neg) + Vehicle f/expensed + Benefits + Career Prog + Continuous Training + Development + Private Health Care
Join a leading Class A OEM specialising in designing, developing, and manufacturing world-class precision machine tools for the manufacturing sector.
As technology advances rapidly, we have an exciting opportunity for a highly skilled electrical/electronics professional to contribute to the design, development, and fault-finding processes on exceptionally complex, electrically powered precision machine tools.
What We're Looking For:
Electrical fault-finding expertise - Priority
Proficiency in reading electrical schematic drawings
Strong IT skills (networking, fault-finding)
Understanding of mechanical systems and machinery and Precision Engineering
Experience in test and commissioning
Understanding of PLC controls and control functionalities
Knowledge of installing full turnkey lines, interconnecting several pieces of machinery to form a production line ensuring all safety measures and meeting industry standards & conformity
Desired Skills:
PLC programming experience (Beckhoff, Siemens, Allen Bradley, Fanuc, ABB)
Ability to design electrical circuits on CAD
Knowledge of UKCA / CE standards
Understanding of Mechanical Applications and work with Mechanical Machinery
Soft Skills:
Can-do attitude
Precise attention to detail
Problem-solving expertise for complex issues
Here's the future vision….
Based at our new UK HQ centrally located, this role offers tremendous potential and serves as a springboard into higher positions within our international manufacturing business.
Ready to elevate your career? Apply today and join a team that's pushing the boundaries of precision engineering!
Meet the employer:
Short 20 min bite sized meet the employer sessions will be organised with our exclusive recruitment partner, Glen Shepherd.
Please get in touch via CV submission & arrange your pre-interview session NOW.
Tel 07977 266309 /
JOB REF: 4312GS
Glen Callum Associates is committed to creating diverse and inclusive workplaces.
We welcome applications from all qualified candidates regardless of gender, age, ethnicity, disability, sexual orientation, or background.
We believe that a variety of perspectives makes a team stronger and a workplace better.
If you need any adjustments during the recruitment process, please let us know - we're here to support you. ....Read more...
Type: Permanent Location: Wolverhampton, England
Start: 13/04/2026
Salary / Rate: £45000 - £50000 per annum + +vehicle f/expensed, private health care
Posted: 2026-03-13 09:00:17
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The In Studio Videographer creates leading edge, compelling, branded videos for online use, corporate presentations, and tradeshow displays.
The Videographer will accomplish the bulk of the technical tasks related to production, post-production and subject matter including but not limited to product and company promotional videos, customer testimonials, and product application techniques as well as transport, set up, equipment operation, staging, set preparation, dressing, etc.
THIS POSITION WORKS ON SITE AT:
1824 Spirit of Texas Way, Suite 200, Conroe, Texas 77301
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Create cutting edge styled product videos for e-commerce, Amazon or social media platforms.
Translate ideas into storyboards, based on direction from marketing leadership.
Shoot and edit video footage, including syncing to music and other audio, as well as creation of motion graphics and effects.
Transport, set-up, and operate various production equipment including cameras, audio and video recorders, lighting equipment, props, and microphones for location and studio production.
Assist with pop-up marketing labs which include working with sales regions to develop digital content.
Assist with staging, set preparation and dressing.
Work with outside editors and crews when necessary.
Operate and care for camera equipment in accordance with all company standards and safety best practices.
Operate and maintain proper calibration levels for cameras, audio and video recorders, and other production equipment.
Collaborate with members of the creative team and key stakeholders as appropriate.
Create templates and ensure graphic solutions and look/feel are consistent with brand and style guidelines.
Manage the company YouTube and Vimeo sites, creating descriptions and optimizing pages.
Create social media content in partnership with the digital marketing team to promote key/desired content.
Articulate and present creative ideas to business partners
Set up and operate computer editing systems, electronic titling systems, video switching equipment, and digital video effects units to produce a final product.
EDUCATION REQUIREMENT:
Four-year degree in video/media production or related field.
EXPERIENCE REQUIREMENT:
2 -4 years in studio video production experience with an agency or corporation.
Experience working with third-party vendors.
Styling experience a plus.
CERTIFICATES, LICENSES, REGISTRATIONS:
HubSpot Inbound Marketing, Marketing Software and other related HubSpot certifications preferred
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Ability to create video graphics, edit footage, produce, and upload optimized video files.
Demonstrated ability to think conceptually, stay on top of current digital trends and push the envelope by consistently bringing new ideas to the table.
Excellent communication skills - verbal, written, listening, and presentation skills; ability to communicate effectively with engineers and jobsite personnel.
Demonstrated ability to thrive in a fast-paced, fluid creative environment.
Attention to detail and consistent follow-through a must.
Solid working understanding of Tremco Branding and Products to ensure directed storytelling.
An understanding of Tremco Sales Points (Sales Force, Case Studies, One-Stop-Shop).
Familiarity with construction terms and visiting jobsites following all safety rules and regulations.
Ability to manage several timetables successfully in a collaborative environment including but not limited to video projects, schedules, and deadlines.
Solid understanding of typography and a clean design aesthetic.
Expert hands-on knowledge in:
Graphics or photo imaging software - Adobe Systems Adobe After Effects; Adobe Systems Adobe Illustrator; Adobe Systems Adobe Photoshop software
Music or sound editing software - Avid Digidesign Pro Tools
Video creation and editing software - Adobe Systems Adobe Premiere Pro software; Apple Final Cut Pro; Boris FX Continuum Complete; Windows Media Services
Understanding of YouTube functionality and optimization a plus
Self-starter with ability to troubleshoot and work independently.
Ability to travel for shooting on location
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, talk, hear, and lift up to 25 lbs.
occasionally.
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally ranges between $54,549 and $68,186.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Houston, Texas
Posted: 2026-03-12 22:08:40
-
LEGAL PERSONAL ASSISTANT - ENTRY LEVEL
Manchester City Centre | Hybrid Working | Permanent | Competitive Salary + Excellent Benefits
We're recruiting on behalf of a global law firm who are recruiting for an experienced Legal Administrator / Entry Level Personal Assistant.This is a fantastic opportunity to join a law firm known for its progressive culture, investment in development, and commitment to innovation, inclusion and client service excellence.
The Role:As a Legal PA, you will provide confidential, proactive and professional support to a designated group of stakeholders, ensuring they are fully supported in a fast-paced and high-performing environment.
Proactive diary, inbox and travel management
Organising internal and external meetings (including agendas and preparation)
Acting as a key liaison for internal/external clients and handling correspondence
End-to-end workflow management, including delegation across support teams
Matter opening and management, electronic filing and records maintenance
Supporting billing/finance processes and ensuring compliance with procedures
Assisting with pitches, presentations and business development activity
Coordinating events and marketing initiatives
Championing process improvements and embracing new technology
About You:
Experience in a similar Personal Assistant role, OR Office Administrative experience within professional services
Strong stakeholder management skills and confidence working at Partner level
Excellent organisation, communication and attention to detail
A proactive, solutions-focused approach with strong ownership of tasks
Ability to delegate and coordinate with wider support functions
Strong IT skills including Outlook, Teams and Microsoft Office
A flexible and collaborative mindset, comfortable supporting across a wider team
Our client offers an excellent benefits package, hybrid working, and a supportive environment focused on development, progression and inclusion.
You'll also have the opportunity to get involved in wider initiatives.
By sending an application or applying for a job, you consent to your personal data being processed and stored by Get Recruited (UK) Ltd in accordance with our Cookie & Privacy Policy (available in the footer on our website).
Get Recruited (UK) Ltd acts as an employment agency for permanent recruitment and as an employment business for the supply of temporary workers.
We are an equal opportunities employer and we never charge candidates a fee for our services. ....Read more...
Type: Permanent Location: Manchester, England
Start: ASAP
Salary / Rate: £26000.00 - £27000.00 per annum + Progression + Benefits
Posted: 2026-03-12 16:09:03
-
Field Service Engineer
Electrical / Electronics & Mechanical
Location: Shropshire / Black Country / Midlands / CentralPackage: Circa (£45k ££neg) + Vehicle f/expensed + Benefits + Career Prog + Continuous Training + Development + Private Health Care
Join a leading Class A OEM specialising in designing, developing, and manufacturing world-class precision machine tools for the manufacturing sector.
As technology advances rapidly, we have an exciting opportunity for a highly skilled electrical/electronics professional to contribute to the design, development, and fault-finding processes on exceptionally complex, electrically powered precision machine tools.
What We're Looking For:
Electrical fault-finding expertise - Priority
Proficiency in reading electrical schematic drawings
Strong IT skills (networking, fault-finding)
Understanding of mechanical systems and machinery and Precision Engineering
Experience in test and commissioning
Understanding of PLC controls and control functionalities
Knowledge of installing full turnkey lines, interconnecting several pieces of machinery to form a production line ensuring all safety measures and meeting industry standards & conformity
Desired Skills:
PLC programming experience (Beckhoff, Siemens, Allen Bradley, Fanuc, ABB)
Ability to design electrical circuits on CAD
Knowledge of UKCA / CE standards
Understanding of Mechanical Applications and work with Mechanical Machinery
Soft Skills:
Can-do attitude
Precise attention to detail
Problem-solving expertise for complex issues
Here's the future vision….
Based at our new UK HQ centrally located, this role offers tremendous potential and serves as a springboard into higher positions within our international manufacturing business.
Ready to elevate your career? Apply today and join a team that's pushing the boundaries of precision engineering!
Meet the employer:
Short 20 min bite sized meet the employer sessions will be organised with our exclusive recruitment partner, Glen Shepherd.
Please get in touch via CV submission & arrange your pre-interview session NOW.
Tel 07977 266309 /
JOB REF: 4312GS
Glen Callum Associates is committed to creating diverse and inclusive workplaces.
We welcome applications from all qualified candidates regardless of gender, age, ethnicity, disability, sexual orientation, or background.
We believe that a variety of perspectives makes a team stronger and a workplace better.
If you need any adjustments during the recruitment process, please let us know - we're here to support you. ....Read more...
Type: Permanent Location: Telford, England
Start: 12/04/2026
Salary / Rate: £45000 - £50000 per annum + +vehicle f/expensed, private health care
Posted: 2026-03-12 14:52:40
-
JOB DESCRIPTION
Tasks PROFILE: Typical tasks for this position include (but are not limited to) the following: Monitor machinery used in the production process and assist machine operators. Examine products to verify conformance to quality standards, BOM, and test. Lift raw materials, finished products, and packed items, manually or using non-motorized equipment. Stop machines when malfunctions occur, clear jams, and report unresolved malfunctions to a machine operator, lead, maintenance, and then management. Secure finished packaged items by gluing, stapling, wrapping, taping, or attaching fastener. Mark or tag identification on parts. Load and unload materials, product, or packaging from machines, containers, conveyors, and conveyances. Help team members by performing duties of lesser skill, such as supplying or holding materials or tools, and cleaning work areas and equipment. Perform TPM (Total Productive Maintenance) per requirements.
May require recording information such as weight, count, time, scrap and date packaged. Stock and sort product for packaging or filling machine operation, and replenish packaging supplies, such as wrapping paper, plastic sheet, boxes, cartons, glue, ink, or labels to ensure all shifts requirements are met. Perform other duties as assigned. Responsibilities/Expectations: Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person. Maintain a good record of attendance and punctuality. Learn all manual tasks performed within the department. Perform tasks assigned using specific operating procedures and following department specific quality control processes and procedures. Treat people with dignity and respect. Conduct all business with integrity. Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities. Follow all safety procedures and company policies.
QUALIFICATIONS:
KNOWLEDGE
English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar. Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
Skills
Operation Monitoring - Watching gauges, dials, or other indicators to make sure a machine is working properly. Quality Control Analysis - Conducting tests and inspections of products, services, or processes to evaluate quality or performance. Operation and Control - Controlling operations of equipment or systems. Monitoring - Monitoring/Assessing performance of yourself, other individuals, or organizations to make improvements or take corrective action. Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. Troubleshooting - Determining causes of operating errors and deciding what to do about it. Coordination - Adjusting actions in relation to others' actions. Equipment Maintenance - Performing routine maintenance on equipment and determining when and what kind of maintenance is needed.
WORK ACTIVITIES
Controlling Machines and Processes - Using either control mechanisms or direct physical activity to operate machines or processes (not including computers or vehicles). Inspecting Equipment, Structures, or Material - Inspecting equipment, structures, or materials to identify the cause of errors or other problems or defects. Monitor Processes, Materials, or Surroundings - Monitoring and reviewing information from materials, events, or the environment, to detect or assess problems. Performing General Physical Activities - Performing physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling of materials. Handling and Moving Objects - Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things. Repairing and Maintaining Mechanical Equipment - Servicing, repairing, adjusting, and testing machines, devices, moving parts, and equipment that operate primarily on the basis of mechanical (not electronic) principles. Evaluating Information to Determine Compliance with Standards - Using relevant information and individual judgement to determine whether events or processes comply with laws, regulations, or standards. From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class. Job Type: Full-time Shift: Monday - Thursday 5:45AM - 4:15PM, Friday: 2-3 hours on non-mandatory Fridays Work Location: In personApply for this ad Online! ....Read more...
Type: Permanent Location: Brooklyn Park, Minnesota
Posted: 2026-03-12 14:12:05
-
Field Service Engineer - UPS / Critical Power
Location: UK Nationwide
Are you an experienced Field Service Engineer with strong knowledge of UPS systems and critical power infrastructure?
Our client, a global provider of critical power and infrastructure solutions, is expanding their service engineering team.
This is an excellent opportunity for a skilled engineer to support the commissioning, servicing, and maintenance of UPS and critical power systems across customer sites throughout the UK and Ireland, ensuring reliable power protection for mission-critical environments.
As a Field Service Engineer - UPS / Critical Power, you will:
Prepare and carry out commissioning, servicing, maintenance, testing, and fault diagnosis of UPS and critical power infrastructure systems and associated battery systems in accordance with customer requirements and applicable procedures.
Perform servicing and preventative maintenance on all installed systems and equipment delivered by the company, including UPS systems, DC power solutions, and battery installations.
Carry out live working procedures safely while ensuring compliance with company safety policies and industry standards.
Complete detailed service reports and relevant documentation following each service visit in accordance with company procedures.
Key Skills and Experience for this Field Service Engineer - UPS / Critical Power role:
Provable experience as a Field Service Engineer, Service Technician, or similar role within power electronics, UPS systems, electrical installations, or critical power infrastructure.
Strong technical knowledge of DC power systems and AC UPS equipment.
Experience working with battery systems used in UPS or critical power environments.
Full UK driving licence required.
This is a fantastic opportunity to join a growing organisation within the UPS and critical power sector, supporting essential infrastructure across telecoms, data centres, and other mission-critical environments throughout the UK.
To apply, please send your CV to NDrain@redlinegroup.Com or call 01582 878828 for more information. ....Read more...
Type: Permanent Location: Hertfordshire, England
Start: ASAP
Salary / Rate: £35000 - £50000 per annum
Posted: 2026-03-12 14:11:33
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The In Studio Videographer creates leading edge, compelling, branded videos for online use, corporate presentations, and tradeshow displays.
The Videographer will accomplish the bulk of the technical tasks related to production, post-production and subject matter including but not limited to product and company promotional videos, customer testimonials, and product application techniques as well as transport, set up, equipment operation, staging, set preparation, dressing, etc.
THIS POSITION WORKS ON SITE AT:
1824 Spirit of Texas Way, Suite 200, Conroe, Texas 77301
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Create cutting edge styled product videos for e-commerce, Amazon or social media platforms.
Translate ideas into storyboards, based on direction from marketing leadership.
Shoot and edit video footage, including syncing to music and other audio, as well as creation of motion graphics and effects.
Transport, set-up, and operate various production equipment including cameras, audio and video recorders, lighting equipment, props, and microphones for location and studio production.
Assist with pop-up marketing labs which include working with sales regions to develop digital content.
Assist with staging, set preparation and dressing.
Work with outside editors and crews when necessary.
Operate and care for camera equipment in accordance with all company standards and safety best practices.
Operate and maintain proper calibration levels for cameras, audio and video recorders, and other production equipment.
Collaborate with members of the creative team and key stakeholders as appropriate.
Create templates and ensure graphic solutions and look/feel are consistent with brand and style guidelines.
Manage the company YouTube and Vimeo sites, creating descriptions and optimizing pages.
Create social media content in partnership with the digital marketing team to promote key/desired content.
Articulate and present creative ideas to business partners
Set up and operate computer editing systems, electronic titling systems, video switching equipment, and digital video effects units to produce a final product.
EDUCATION REQUIREMENT:
Four-year degree in video/media production or related field.
EXPERIENCE REQUIREMENT:
2 -4 years in studio video production experience with an agency or corporation.
Experience working with third-party vendors.
Styling experience a plus.
CERTIFICATES, LICENSES, REGISTRATIONS:
HubSpot Inbound Marketing, Marketing Software and other related HubSpot certifications preferred
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Ability to create video graphics, edit footage, produce, and upload optimized video files.
Demonstrated ability to think conceptually, stay on top of current digital trends and push the envelope by consistently bringing new ideas to the table.
Excellent communication skills - verbal, written, listening, and presentation skills; ability to communicate effectively with engineers and jobsite personnel.
Demonstrated ability to thrive in a fast-paced, fluid creative environment.
Attention to detail and consistent follow-through a must.
Solid working understanding of Tremco Branding and Products to ensure directed storytelling.
An understanding of Tremco Sales Points (Sales Force, Case Studies, One-Stop-Shop).
Familiarity with construction terms and visiting jobsites following all safety rules and regulations.
Ability to manage several timetables successfully in a collaborative environment including but not limited to video projects, schedules, and deadlines.
Solid understanding of typography and a clean design aesthetic.
Expert hands-on knowledge in:
Graphics or photo imaging software - Adobe Systems Adobe After Effects; Adobe Systems Adobe Illustrator; Adobe Systems Adobe Photoshop software
Music or sound editing software - Avid Digidesign Pro Tools
Video creation and editing software - Adobe Systems Adobe Premiere Pro software; Apple Final Cut Pro; Boris FX Continuum Complete; Windows Media Services
Understanding of YouTube functionality and optimization a plus
Self-starter with ability to troubleshoot and work independently.
Ability to travel for shooting on location
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, talk, hear, and lift up to 25 lbs.
occasionally.
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally ranges between $54,549 and $68,186.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Houston, Texas
Posted: 2026-03-12 14:11:14
-
JOB DESCRIPTION
Tasks PROFILE: Typical tasks for this position include (but are not limited to) the following: Monitor machinery used in the production process and assist machine operators. Examine products to verify conformance to quality standards, BOM, and test. Lift raw materials, finished products, and packed items, manually or using non-motorized equipment. Stop machines when malfunctions occur, clear jams, and report unresolved malfunctions to a machine operator, lead, maintenance, and then management. Secure finished packaged items by gluing, stapling, wrapping, taping, or attaching fastener. Mark or tag identification on parts. Load and unload materials, product, or packaging from machines, containers, conveyors, and conveyances. Help team members by performing duties of lesser skill, such as supplying or holding materials or tools, and cleaning work areas and equipment. Perform TPM (Total Productive Maintenance) per requirements.
May require recording information such as weight, count, time, scrap and date packaged. Stock and sort product for packaging or filling machine operation, and replenish packaging supplies, such as wrapping paper, plastic sheet, boxes, cartons, glue, ink, or labels to ensure all shifts requirements are met. Perform other duties as assigned. Responsibilities/Expectations: Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person. Maintain a good record of attendance and punctuality. Learn all manual tasks performed within the department. Perform tasks assigned using specific operating procedures and following department specific quality control processes and procedures. Treat people with dignity and respect. Conduct all business with integrity. Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities. Follow all safety procedures and company policies.
QUALIFICATIONS:
KNOWLEDGE
English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar. Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
Skills
Operation Monitoring - Watching gauges, dials, or other indicators to make sure a machine is working properly. Quality Control Analysis - Conducting tests and inspections of products, services, or processes to evaluate quality or performance. Operation and Control - Controlling operations of equipment or systems. Monitoring - Monitoring/Assessing performance of yourself, other individuals, or organizations to make improvements or take corrective action. Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. Troubleshooting - Determining causes of operating errors and deciding what to do about it. Coordination - Adjusting actions in relation to others' actions. Equipment Maintenance - Performing routine maintenance on equipment and determining when and what kind of maintenance is needed.
WORK ACTIVITIES
Controlling Machines and Processes - Using either control mechanisms or direct physical activity to operate machines or processes (not including computers or vehicles). Inspecting Equipment, Structures, or Material - Inspecting equipment, structures, or materials to identify the cause of errors or other problems or defects. Monitor Processes, Materials, or Surroundings - Monitoring and reviewing information from materials, events, or the environment, to detect or assess problems. Performing General Physical Activities - Performing physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling of materials. Handling and Moving Objects - Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things. Repairing and Maintaining Mechanical Equipment - Servicing, repairing, adjusting, and testing machines, devices, moving parts, and equipment that operate primarily on the basis of mechanical (not electronic) principles. Evaluating Information to Determine Compliance with Standards - Using relevant information and individual judgement to determine whether events or processes comply with laws, regulations, or standards. From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class. Job Type: Full-time Shift: Monday - Thursday 5:45AM - 4:15PM, Friday: 2-3 hours on non-mandatory Fridays Work Location: In personApply for this ad Online! ....Read more...
Type: Permanent Location: Brooklyn Park, Minnesota
Posted: 2026-03-12 14:11:13
-
The Programme Manager, based in Milton Keynes, Buckinghamshire will play a pivotal role in shaping and managing the future electronic product line for Defence, Space and Aerospace applications.
They will be responsible for the management of subcontract manufacturers and 3rd party suppliers to ensure project delivery on-time, on budget and to requirements.
Ideal candidates for the Programme Manager job based in Milton Keynes, Buckinghamshire will have experience in the following areas:
Background in Electronics Engineering / RF based technologies.
Product lifecycle management from cradle to grave.
Experience in defence or aerospace sectors / high reliability industries with similar regulations as AS9100.
This is a fantastic opportunity for a Programme Manager to join a well R&D & Production team that will provide superb on-the-job training and opportunities for career progression.
To apply for this Product Manager role in Milton Keynes, Buckinghamshire, please contact Tom Drew quoting ref.
THD1365 on 01582 878848 or email TDrew@redlinegroup.Com.
Otherwise, we welcome conversation regarding similar positions to Project Management roles. ....Read more...
Type: Permanent Location: Milton Keynes, England
Start: ASAP
Salary / Rate: £60000 - £65000 per annum
Posted: 2026-03-12 12:54:56
-
A Graduate Electronic Component Engineer is required to join an innovative and collaborative engineering team based in Clacton-on-Sea.
This is an excellent opportunity for a graduate engineer to develop their career while supporting the selection, qualification, and lifecycle management of electronic components used across advanced hardware designs.
As a Graduate Electronic Component Engineer, you will work closely with experienced engineers and cross-functional teams, gaining valuable exposure to industry best practices in component selection, BOM management, compliance, and lifecycle monitoring.
This role offers hands-on involvement with both engineering and supply chain teams, providing a strong foundation in the technical and commercial aspects of electronic component management within a modern hardware development environment.
Responsibilities for this Graduate Electronic Component Engineer based in Clacton-on-Sea:
Work closely with hardware design, manufacturing, quality, and procurement teams to define component specifications and selection criteria
Create and maintain component libraries to support schematic capture and PCB layout activities
Perform component evaluations including parametric comparisons, second-source identification, and suitability assessments
Validate and assess component performance through testing and evaluation activities to ensure compliance with design requirements
Key Skills & Experience for this Graduate Electronic Component Engineer based in Clacton-on-Sea:
Degree in Electronic Engineering or a closely related discipline (or equivalent industry experience)
Familiarity with schematic capture and PCB layout tools
Practical experience working with BOMs, component datasheets, and spreadsheets
Strong analytical and problem-solving skills with excellent attention to detail
Effective communication and teamwork skills within a collaborative engineering environment
This role is unable to offer sponsorship, full UK working rights required.
Relocation assistance can be offered for this role.
How to Apply
To apply for the Graduate Component Engineer role based in Clacton-on-Sea, please submit a copy of your CV today. ....Read more...
Type: Permanent Location: Clacton-On-Sea, England
Start: ASAP
Salary / Rate: £27000 - £29500 per annum
Posted: 2026-03-12 12:18:54
-
A Graduate Component Engineer is sought to join an innovative engineering team in Clacton, Essex, contributing to the selection, qualification, and lifecycle management of electronic components used across hardware designs.
The Graduate Component Engineer, Clacton, Essex, will be expected to develop your understanding in the field, learning from peers and senior engineers in technical areas and industry best practices.
This may include component selection processes, BOM management, lifecycle monitoring, compliance standards, and exposure to hardware design and testing activities used in production and supplier environments.
Responsibilities include:
Work with hardware design, manufacturing, quality and procurement teams to define component specifications and selection criteria.
Create and maintain component libraries, supporting schematic capture and PCB layout activities.
Develop and execute component evaluations, including parametric comparisons, second-source identification, and suitability assessments.
Debug and validate electronic component performance through testing and evaluation activities to ensure compliance with design requirements.
Collaborate with procurement and suppliers to gather technical data, availability information and lifecycle status updates.
Maintain comprehensive technical documentation, including BOM generation, BOM risk assessments and lifecycle tracking (NRND, LTB, EOL).
Support production and engineering teams with component-related technical queries and assist with quality system audits.
Key skills & experience:
Degree in Electronic Engineering or a closely related discipline, or equivalent industry experience.
Proficiency with schematic capture and PCB layout tools.
Practical experience working with BOMs, component datasheets and spreadsheets.
Strong problem-solving and analytical skills.
Effective communication and teamwork abilities, with excellent attention to detail.
How to apply:
Apply now for the Graduate Component Engineer role in Clacton, Essex.
Please apply with a copy of your CV! ....Read more...
Type: Permanent Location: Clacton-On-Sea, England
Start: ASAP
Salary / Rate: £27000 - £29500 per annum
Posted: 2026-03-12 12:14:55
-
A Graduate Electronics Design Engineer is required to join an innovative and forward-thinking engineering team based in Clacton-on-Sea.
This is an exciting opportunity for a graduate engineer to begin their career within a collaborative environment, contributing to the design, development, and validation of high-performance electronic hardware solutions across the full product lifecycle.
As a Graduate Electronics Design Engineer, you will work alongside experienced engineers who will support your professional development while exposing you to industry best practices and real-world engineering challenges.
You will gain hands-on experience across multiple areas of hardware design including product specification, schematic capture, PCB layout, prototype validation, hardware debugging, and cross-functional collaboration within a dynamic engineering team.
Responsibilities for this Graduate Electronics Design Engineer based in Clacton-on-Sea:
Work closely with Product Management to help define product and design specifications
Support and lead elements of product update and validation projects under the guidance of senior engineers
Produce detailed schematics and PCB layouts using Altium Designer
Develop and execute test plans for prototypes and production-ready hardware
Debug and troubleshoot hardware using laboratory equipment such as oscilloscopes and digital multimeters
Collaborate with mechanical and software teams to ensure seamless hardware and software integration
Key Skills & Experience for this Graduate Electronics Design Engineer based in Clacton-on-Sea:
Degree in Electronic Engineering or a closely related discipline
Experience with schematic capture and PCB layout tools
Hands-on experience using laboratory test equipment such as oscilloscopes and multimeters
Strong problem-solving skills and a proactive approach to learning and development
This role cannot offer sponsorship, therefore full UK working rights are required.
Relocation assistance may be available for the right candidate.
How to Apply
To apply for this Graduate Hardware Design Engineer role based in Clacton-on-Sea, please submit your CV today. ....Read more...
Type: Permanent Location: Clacton-On-Sea, England
Start: ASAP
Salary / Rate: £28000 - £30000 per annum
Posted: 2026-03-12 12:12:32
-
An exciting opportunity has arisen for a SMT Engineer based in Nottingham to join a world leading Engineering and Manufacturing company.
This is a fantastic chance to join a company developing lifesaving, safety critical equipment.
You will be responsible for low power, safety critical hardware to work with new and existing products, which are installed in hazardous areas.
You will lead and implement new design from initial concept though to launch.
The successful candidate for the SMT Engineer job based in Nottingham will have a strong background in, SMT, PCB and Final Product Assembly processes and techniques, have a good knowledge of modern manufacturing techniques including, OPF, Lean and 5S, also have a relevant degree or equivalent qualifications and also a strong working knowledge of electronic assembly and processes including IPC-A-610 and J-STD-001.
Ideally you will have experience leading a team and working with SMT machines and strong man-management skills.
This is a unique opportunity to join a leader in their market who can offer the opportunity for career progression and personal development, joining a well-established manufacturing site in Nottingham.
To apply for this SMT Engineer, based in Nottingham, please send your CV and covering letter to Rwilcocks@redlinegroup.Com, or for more information contact Ricky Wilcocks on 01582 878810. ....Read more...
Type: Permanent Location: Nottingham, England
Start: ASAP
Salary / Rate: £35000 - £42000 per annum
Posted: 2026-03-12 10:12:16
-
JOB DESCRIPTION
The Field Resource Inspector is responsible for completing documents, forms, processes and data gathering to ensure accuracy, quality and integrity in our field inspection reporting.
Documents include electronic, hard or soft copies.
This position is responsible to perform specific inspection services at the direction of the local Foreman or Supervisor.
The Field Resource Inspector will work independently or with other resources depending on the task being performed.
The Field Resource Inspector will complete and be responsible for all types of job site inspections including: TremCare, Job Site, QA and QA Plus.
The Inspection technician is responsible for daily review and performance of safety, efficiency, and quality as it relates to the performance of inspection services.
Safety is our number one priority and will be embedded into every discussion, meeting and project.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Field Resource Inspection Technician is responsible for performing the inspection services.
They are to be on time and complete work scheduled.
The Inspection Technician will perform all services in a professional manner as it pertains to conduct, appearance and communication.
All required job information should be completed promptly via the required tools and resources.
Must be familiar with all forms of low slope roofing systems.
Must be knowledgeable with Tremco line of products and proper applications
Daily responsibilities include, but are not limited to:
Review and confirm all work orders scheduled.
Completion of all safety related activities using the designated tools mandated by Tremco
Take photos to document phases of work performed on the job
Job Site Inspection specific:
Ensure the Spec has been read and will be taken to the project location.- Job Site Inspection specific
Check materials for specification compliance, material type and proper storage
Walk the roof with the Foreman.
Address proper drainage, staging, application and details
Observe and document all work being done The hourly rate for applicants in this position generally ranges between $20 and $33.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Benefits:
Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Buffalo, New York
Posted: 2026-03-12 06:14:48
-
JOB DESCRIPTION
The Field Resource Inspector is responsible for completing documents, forms, processes and data gathering to ensure accuracy, quality and integrity in our field inspection reporting.
Documents include electronic, hard or soft copies.
This position is responsible to perform specific inspection services at the direction of the local Foreman or Supervisor.
The Field Resource Inspector will work independently or with other resources depending on the task being performed.
The Field Resource Inspector will complete and be responsible for all types of job site inspections including: TremCare, Job Site, QA and QA Plus.
The Inspection technician is responsible for daily review and performance of safety, efficiency, and quality as it relates to the performance of inspection services.
Safety is our number one priority and will be embedded into every discussion, meeting and project.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Field Resource Inspection Technician is responsible for performing the inspection services.
They are to be on time and complete work scheduled.
The Inspection Technician will perform all services in a professional manner as it pertains to conduct, appearance and communication.
All required job information should be completed promptly via the required tools and resources.
Must be familiar with all forms of low slope roofing systems.
Must be knowledgeable with Tremco line of products and proper applications
Daily responsibilities include, but are not limited to:
Review and confirm all work orders scheduled.
Completion of all safety related activities using the designated tools mandated by Tremco
Take photos to document phases of work performed on the job
Job Site Inspection specific:
Ensure the Spec has been read and will be taken to the project location.- Job Site Inspection specific
Check materials for specification compliance, material type and proper storage
Walk the roof with the Foreman.
Address proper drainage, staging, application and details
Observe and document all work being done The hourly rate for applicants in this position generally ranges between $20 and $33.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Benefits:
Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Buffalo, New York
Posted: 2026-03-12 06:08:42
-
Our client is a well-established and growing specialist manufacturer based in Portsmouth supplying high-quality technical components and engineered solutions to a range of highly regulated industries across the UK and internationally. Due to continued growth, they are looking to recruit a motivated and commercially driven Sales Executive to join their sales and business development team.
This role will focus on generating new business opportunities, developing strong customer relationships, and supporting the expansion of the companys presence across multiple technical markets.
This is an excellent opportunity for a sales professional who enjoys working within a technical or manufacturing environment and wants to contribute to the growth of a forward-thinking organisation.
This role is a remote based role working Monday to Friday, which includes customer visits, trade shows, salary is £45-55,000pa
Duties for the successful Sales Executive:
- Identify and develop new business opportunities across a range of technical and manufacturing sectors
- Promote the companys manufacturing capabilities and value-added services
- Prepare and present product and service information to prospective clients
- Build and maintain strong relationships with both new and existing customers
- Understand customer technical requirements and work with internal engineering and production teams to deliver appropriate solutions
- Manage customer accounts and ensure high levels of customer satisfaction
- Research and identify new market opportunities
- Attend trade shows, networking events, and customer visits to promote the companys capabilities
- Maintain accurate records of sales activities, communications, and pipeline opportunities within CRM systems
- Follow up on leads, quotations, and customer enquiries
Requirements for the successful Sales Executive: Essential
- Proven experience in B2B sales, ideally within manufacturing or technical products
- Strong communication, negotiation, and relationship-building skills
- Ability to understand and communicate technical products or solutions
- Self-motivated with a results-driven mindset
- Strong organisational and time management skills
- Experience using CRM systems and Microsoft Office
Desirable
- Experience within technical manufacturing, engineering, or electronics-related sectors
- Existing contacts within relevant industries
- Knowledge of manufacturing processes and supply chains
Benefits for the successful Sales Executive:
- Competitive base salary
- Commission / performance-based bonus structure
- Pension scheme
- Travel expenses covered
- Remote working
- Opportunity to attend industry events and trade shows
If you have the required skills and experience please apply today and Yasmin will call you. ....Read more...
Type: Permanent Location: Hilsea,England
Start: 11/03/2026
Salary / Rate: £45000 - £550000 per annum
Posted: 2026-03-11 17:13:04
-
Trainee Technical Support Engineer
Meath
€30,000 - €35,000 + Training + Industry Leader + Medical Sector + Immediate Start
Take the first step in your career as a Trainee Technical Support Engineer for a company who will offer constant support and personal development.
Work within a highly skilled team where you will be consistently challenged and learning new skills.
This supplier services and maintains a variety of medical equipment and is well known in the industry.
Start as a Trainee Technical Support Engineer and progress your career at your own pace through to senior positions whilst being able to develop your skill set.
Your Role As A Trainee Technical Support Engineer Will Include:
* Supporting Senior Engineers
* Diagnosing and Repairing Radiology Products
* Installing Hardware and Software
As A Trainee Technical Support Engineer You Will Have:
* Desire and attitude towards learning and development
* Full driving licence
* Live commutable to Meath
Keywords: trainee, engineer, mechanical, electrical, medical, radiology, electronics, hardware, software, Kells, Meath, Navan, Trim, Drogheda, Ireland ....Read more...
Type: Permanent Location: Meath, Republic of Ireland
Start: ASAP
Salary / Rate: €30000 - €35000 per annum
Posted: 2026-03-11 16:41:47
-
Workshop Controller / Automotive Workshop Supervisor / Service Controller
Location: Ashford, Kent
Job Type: Full Time Permanent
Industry: Automotive / Vehicle Service / Motor Trade
An established and busy automotive service centre in Ashford is seeking an experienced Workshop Controller / Workshop Supervisor / Automotive Service Controller to manage daily workshop operations and support a high-performing team of technicians.
This is an excellent opportunity for someone with strong motor trade, vehicle service, and workshop management experience to join a professional and well-organised service department.
Key Responsibilities Workshop Controller As Workshop Controller, you will be responsible for the efficient day-to-day running of the workshop, including:
- Allocating technician workloads and prioritising repair jobs
- Managing workshop scheduling and service planning
- Supporting vehicle diagnostics, repairs, servicing and inspections
- Monitoring vehicle health checks (VHC) and technician productivity
- Coordinating vehicle movement within the workshop
- Communicating job progress with service advisors and front-of-house teams
- Ensuring efficient workshop workflow and service turnaround times
- Managing job cards, administration and service documentation
- Maintaining high standards of health & safety, workshop organisation and cleanliness
- Supporting technicians to achieve productivity targets and performance standards
- Resolving workshop issues and ensuring smooth service department operations
Skills & Experience Required We are looking for a motivated Workshop Controller / Automotive Supervisor / Motor Trade Professional with experience in a fast-paced automotive service environment.
Essential skills:
- Previous experience as Workshop Controller, Workshop Manager, Automotive Service Controller, or Senior Technician
- Strong knowledge of vehicle servicing, repairs, diagnostics and workshop operations
- Experience managing technician productivity and job allocation
- Excellent organisation and time management
- Strong communication and leadership skills
- Ability to work under pressure in a busy motor trade environment
- Experience with job cards, service scheduling and workshop management systems
- A full UK driving licence
Working Hours
- Monday to Friday: 7:30am 5:30pm
- 1 in 4 Saturdays on a rota basis
Benefits
- 32 days annual leave including bank holidays
- Training and development opportunities
- Employee discounts on servicing and vehicle parts
- Staff events and team activities
- Modern paperless workshop systems and electronic job cards
- Supportive and professional team environment
About the Company This long-established family-owned automotive group has been serving customers across Kent for over 100 years, providing high-quality vehicles, servicing and customer care.
The business combines traditional customer service values with modern automotive technology and prides itself on building strong teams within its service departments.
Apply Now If you are an experienced Workshop Controller, Workshop Supervisor, Automotive Service Manager or Motor Trade Professional, we would love to hear from you.
Submit your CV and application today to be considered. ....Read more...
Type: Permanent Location: Ashford,England
Start: 11/03/2026
Salary / Rate: £35000 per annum, Benefits: Bonus
Posted: 2026-03-11 12:22:04
-
Are you an experienced Electronics/Electrical Technician? Would you like to work alongside our R&D team and contribute to developing our next generation of products?Cheyney Design (part of the Cheney Group of Companies) is a dynamic technology and manufacturing business based near Royston, Hertfordshire.
Working closely with our sister company, Sapphire Inspection Systems, we design and manufacture advanced X-ray inspection systems, modules, and software used globally across the food, pharmaceutical, and process equipment industries.Responsibilities and duties will include inspection, test & repair of some PCB sub-assemblies, and complete in-house components assembly production.
The Technician will be involved in a wide range of activities related to electronic/electrical components for the production and detection of x-rays and control of associated high-speed machinery.Key Responsibilities
Support the X-Ray and controls component manufacturing department in production, development, testing and quality control.Work according to test process for x-ray generators, detectors, control boards and industrial PC components prior to installation or shipment.Fault find electronics and define required revisions or repairs.Support testing, evaluating, modifying and re-testing solutions.Analyse data and create reports.Work alongside technical development teams on special development projects.Work with development, manufacturing and service departments to control/organise the versions of firmware to ensure that the latest versions are installed on devices.
Skills and ExperienceWhilst a qualified technician is preferred, we are interested in any candidate able to demonstrate an outside enthusiasm in electronics, an inquisitive, enquiring mind, and a "can do", self-starting character.The ideal candidate will be a great problem solver and have experience in:
Sub-Assembly testing, including provision of reports, using equipment such as multi-meters, oscilloscopes and other test rigsFollowing schematics and assembly diagrams to identify components and test points.Soldering and rework of printed circuit boards.Working to existing SOP'sProduction assembly of small batch runsPrototype assembly
Ideally, you will also have experience in:
Bill of materials creationCapture, author and editing SOP'sPCB assembly inspection
Package and BenefitsAs a key member of our growing team, this role offers opportunities for career growth and personal progression.
You will report to the Components Production Supervisor.
Office-based role, Monday-Friday, 9:00am-5:00pmLocation: Head Office, Litlington, RoystonSalary: circa £32,000, depending on experiencePension: Nest Pension SchemeHoliday: 25 days per annum
How to Apply:If you are interested in this position and would like to learn more we would love to hear from you.
Please attach your CV to the link provided and we will be in contact. ....Read more...
Type: Permanent Location: Royston, Hertfordshire, England
Start: ASAP
Duration: Permanent
Salary / Rate: £32k per year
Posted: 2026-03-11 11:51:46
-
Electronics Engineer Consultant - Security Clearance - Cambridge
A new design consultancy, based in Cambridge, are currently looking for a Electronics Engineer Consultant to add to the team of experienced experts, specifically with a focus on security cleared projects.
Although this is a new design consultancy, they have the backing of larger companies meaning you still have the job security of working for a large company.
You will also have benefits including pension, share purchase schemes, healthcare, life assurance and other excellent benefits not normally available to smaller organisations.
We are looking for an Electronics Engineer who has ideally worked on MOD, Security Clearance or other sensitive technologies.
Due to the nature of consultancy services, your electronics experience could be across a number of fields such as RF Engineering, Microwave Electronics, Analogue Electronics, Sensors Technologies, PCB Electronics or other complex electronics design.
It will also be ideal if you have specific Firmware, Embedded or other software experience.
Due to the nature of work, you must already hold or be able to obtain security clearance.
Apart from the benefits, you will be rewarded with an excellent salary, career opportunities and a continued skills training to keep you at the forefront of technologies.
This is a rare opportunity to be involved with a design consultancy at the ground level, meaning future career development will be more likely than with other consultancies or companies.
Due to this, I'm expecting a lot of interest in this role.
If you are interested in the role, apply now or risk missing out.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices recruitment and Scientific recruitment specialists Newton Colmore Consulting, on +44 121 268 2240 or make an application and one of our team at Newton Colmore Consulting will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Scientific Software, Robotics, Data Science, Healthcare Communications.
Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance and Field Service Engineering sectors.
....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: Negotiable
Posted: 2026-03-11 09:24:18
