-
Redline has been retained by a leading process instrumentation designer & manufacturer who are looking for a Procurement Lead - Electronics to join their team based in Surrey.
This role is a specialist procurement position focused on managing electronic and electrical components, ensuring suppliers deliver on cost, quality, and delivery in a regulated manufacturing environment.
This is a hands-on supplier management and sourcing role, supporting both new product introduction (NPI) and ongoing production.
Key responsibilities for Procurement Lead - Electronics - Surrey:
Own supplier selection, negotiation, and contract award for electronic commodities
Support RFQs by providing pricing and lead times to Sales
Ensure suppliers meet all technical, regulatory, and commercial requirements
Manage supplier performance (quality, cost, delivery) and drive improvements
Resolve supply chain issues (quality, delays, etc.) With internal teams and suppliers
Support ongoing purchasing and supply continuity
Ensure compliance with ISO9001 and company standards
Experience required for Procurement Lead - Electronics - Surrey:
Experience sourcing electronic/electrical components in a regulated industry
Strong supplier management, negotiation, and problem-solving skills
Ability to understand technical requirements and communicate them to suppliers
Confident stakeholder management across engineering, production, and suppliers
MCIPS qualified would be ideal
This is a great opportunity to join a growing, competitive and industry leading organisation who can offer the opportunity for career development and personal growth.
Onsite position.
Competitive benefits.
....Read more...
Type: Permanent Location: Frimley, England
Start: ASAP
Salary / Rate: £45000 - £55000 per annum
Posted: 2026-08-03 08:16:47
-
Electronic Instrument Test technician with good all round precision engineering electronic data acquisition, test validation and verification experience required to join a comprehensive in house test facility.
Component and product, instrumentation, electronic / electrical testing experience ideally in a very practical precision design environment.
Key skills
Data acquisition system build and administration to experiment, collect data and calculate results.
Set up, configure data acquisitions system software, example NI DAQ, NI LabVIEW, DASYLab.
Instrumentation use including:
Pressure sensors
Accelerometers
Flow meters
Loadcells
Thermocouples.
Cable layout and installation route cabling
Soldering skills at connector and PCB level
Digital multi meter (DMM) and oscilloscope knowledge.
Environmental testing.
Inverters, 3 phase motors and programmable Logic controller knowledge. ....Read more...
Type: Permanent Location: Gloucester, England
Start: ASAP
Duration: Permanent
Salary / Rate: £26000 - £42000 Per Annum None
Posted: 2026-08-02 14:43:01
-
JOB DESCRIPTION
Legend Brands, an industry leader and long-standing company, combining over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
Job Summary
Under general supervision, the Drafter II is responsible for working with design engineers to produce drawings from sketches, existing drawings, and electronic images.
Utilize CAD tools to create and maintain individual part and assembly drawings.
Support the change control process, complete engineering change orders and update engineering and manufacturing databases.
Please apply directly on our careers page - https://hcwx.fa.us2.oraclecloud.com/hcmUI/CandidateExperience/en/sites/CX_2
Essential Duties
• Ensure product documentation of drawings, revisions, engineering change requests, and engineering change orders are accurate and complete• Respond to production and/or process problems through Engineering Change Requests (ECR) and by conferring with the engineers• Support new product development by creating part and assembly drawings under the direction of the product designer • Provide Bills of Materials (BOM) for new product or improvements to existing products and maintain BOMs in material planning computer system (MRP 9000)• Create Engineering Change Requests and Engineering Change Orders (ECO) for communicating and recording new products and product changes.
• Prepare miscellaneous diagrams, charts and drawings• Maintain revision-controlled drawings and models in a PDM vault.
• Communicate with QA, Vendors, Buyers, Inventory and Manufacturing regarding new and revised drawings.
• Performs other related duties as assigned.
Additional knowledge to qualify for Drafter II classification
• Basic proficiency in Word and Excel
• Basic creation of part model and assemblies.
Follow the QC drawing and the drawing release process.
• Understanding of CAD filing system on the main network, PDM, and in SharePoint
• Process ECR's and ECO's
• Basic knowledge of ERP databases
• Understanding and practicing SW configurations; creation of new and editing existing configurations
• Applying sheet metal properties for Press Brake based on material type and thickness
Minimum Qualifications
Education and Experience • High school diploma or equivalent required.
• Minimum of 2-4 years related work experience required.
Employment Standards
• Knowledge of SolidWorks • Knowledge of reading drawings • Skilled in SolidWorks • Skilled in Microsoft office and excel • Ability to Organize and work to priorities • Ability to process drawing revision on part level CAD files • Ability to pass a pre-employment background check.
Hiring Range Between $34.00/hr.
- $38.00/hr.
Benefits
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations • Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
• Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's.
• All job offers are contingent upon satisfactory pre-employment drug test and background screening.Apply for this ad Online! ....Read more...
Type: Permanent Location: Prescott, Arizona
Posted: 2026-08-01 15:13:52
-
JOB DESCRIPTION
Legend Brands, an industry leader and long-standing company, combining over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
Job Summary
Under general supervision, the Drafter II is responsible for working with design engineers to produce drawings from sketches, existing drawings, and electronic images.
Utilize CAD tools to create and maintain individual part and assembly drawings.
Support the change control process, complete engineering change orders and update engineering and manufacturing databases.
Please apply directly on our careers page - https://hcwx.fa.us2.oraclecloud.com/hcmUI/CandidateExperience/en/sites/CX_2
Essential Duties
• Ensure product documentation of drawings, revisions, engineering change requests, and engineering change orders are accurate and complete• Respond to production and/or process problems through Engineering Change Requests (ECR) and by conferring with the engineers• Support new product development by creating part and assembly drawings under the direction of the product designer • Provide Bills of Materials (BOM) for new product or improvements to existing products and maintain BOMs in material planning computer system (MRP 9000)• Create Engineering Change Requests and Engineering Change Orders (ECO) for communicating and recording new products and product changes.
• Prepare miscellaneous diagrams, charts and drawings• Maintain revision-controlled drawings and models in a PDM vault.
• Communicate with QA, Vendors, Buyers, Inventory and Manufacturing regarding new and revised drawings.
• Performs other related duties as assigned.
Additional knowledge to qualify for Drafter II classification
• Basic proficiency in Word and Excel
• Basic creation of part model and assemblies.
Follow the QC drawing and the drawing release process.
• Understanding of CAD filing system on the main network, PDM, and in SharePoint
• Process ECR's and ECO's
• Basic knowledge of ERP databases
• Understanding and practicing SW configurations; creation of new and editing existing configurations
• Applying sheet metal properties for Press Brake based on material type and thickness
Minimum Qualifications
Education and Experience • High school diploma or equivalent required.
• Minimum of 2-4 years related work experience required.
Employment Standards
• Knowledge of SolidWorks • Knowledge of reading drawings • Skilled in SolidWorks • Skilled in Microsoft office and excel • Ability to Organize and work to priorities • Ability to process drawing revision on part level CAD files • Ability to pass a pre-employment background check.
Hiring Range Between $34.00/hr.
- $38.00/hr.
Benefits
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations • Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
• Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's.
• All job offers are contingent upon satisfactory pre-employment drug test and background screening.Apply for this ad Online! ....Read more...
Type: Permanent Location: Prescott, Arizona
Posted: 2026-08-01 15:12:36
-
JOB DESCRIPTION
Legend Brands, an industry leader and long-standing company, combining over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
Job Summary
Under general supervision, the Drafter II is responsible for working with design engineers to produce drawings from sketches, existing drawings, and electronic images.
Utilize CAD tools to create and maintain individual part and assembly drawings.
Support the change control process, complete engineering change orders and update engineering and manufacturing databases.
Please apply directly on our careers page - https://hcwx.fa.us2.oraclecloud.com/hcmUI/CandidateExperience/en/sites/CX_2
Essential Duties
• Ensure product documentation of drawings, revisions, engineering change requests, and engineering change orders are accurate and complete• Respond to production and/or process problems through Engineering Change Requests (ECR) and by conferring with the engineers• Support new product development by creating part and assembly drawings under the direction of the product designer • Provide Bills of Materials (BOM) for new product or improvements to existing products and maintain BOMs in material planning computer system (MRP 9000)• Create Engineering Change Requests and Engineering Change Orders (ECO) for communicating and recording new products and product changes.
• Prepare miscellaneous diagrams, charts and drawings• Maintain revision-controlled drawings and models in a PDM vault.
• Communicate with QA, Vendors, Buyers, Inventory and Manufacturing regarding new and revised drawings.
• Performs other related duties as assigned.
Additional knowledge to qualify for Drafter II classification
• Basic proficiency in Word and Excel
• Basic creation of part model and assemblies.
Follow the QC drawing and the drawing release process.
• Understanding of CAD filing system on the main network, PDM, and in SharePoint
• Process ECR's and ECO's
• Basic knowledge of ERP databases
• Understanding and practicing SW configurations; creation of new and editing existing configurations
• Applying sheet metal properties for Press Brake based on material type and thickness
Minimum Qualifications
Education and Experience • High school diploma or equivalent required.
• Minimum of 2-4 years related work experience required.
Employment Standards
• Knowledge of SolidWorks • Knowledge of reading drawings • Skilled in SolidWorks • Skilled in Microsoft office and excel • Ability to Organize and work to priorities • Ability to process drawing revision on part level CAD files • Ability to pass a pre-employment background check.
Hiring Range Between $34.00/hr.
- $38.00/hr.
Benefits
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations • Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
• Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's.
• All job offers are contingent upon satisfactory pre-employment drug test and background screening.Apply for this ad Online! ....Read more...
Type: Permanent Location: Prescott, Arizona
Posted: 2026-08-01 15:11:37
-
Engineering Physicist - Sensor Design
An exciting opportunity has arisen for an experienced engineering physicist to join a new team in Cambridge to work on their revolutionary sensor technologies.
This company are at the forefront of innovation and are developing a potentially disruptive product for their market.
As an Engineering Physicist, you will take a hands-on approach to a variety of roles including the design, fabrication and test of electronic modules for sensing in harsh environments and the identification and resolution of any issues with the technology.
You will also be responsible for the measurement and analysis of the devices and the integration of the modules into larger oil and gas sensors.
You will also be developing demonstrations and contribute towards field deployment.
You will use your experience with signal processing and electronics in general to lead the development of this new technology.
We are looking for physicists who love solving highly complex problems on leading edge technology and who enjoy hands-on R&D.
To be considered for this exciting role you will need to have a degree in electronics, physics or a closely related discipline along with hands on R&D experience with sensors.
You will ideally have experience with MEMS, signal processing and low-noise, precision electronics design.
Additionally, you will also have some exposure to high temperature electronics design.
In exchange for your skills and expertise, the company offer a highly competitive package as well as providing a generous share option scheme.
Because of the stage the company are at it is a really exciting time to join as they look to expand their operation and bring their product to market.
For more information, please call Matthew Lowdon of Newton Colmore Consulting on 0044 121 268 2240 or make an application and one of our team will be in touch.
Newton Colmore Consulting is a highly specialist recruitment consultancy operating within the medical devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance and Field Service Engineering sectors throughout Europe and the US.
Key words: Sensor Development, Oil and Gas, MEMS, Microelectromechanical Systems, Physics, Electronics, Signal Processing ....Read more...
Type: Permanent Location: Cambridge, England
Salary / Rate: Negotiable + bonus
Posted: 2026-07-31 14:56:51
-
A Systems Engineer is required to join an innovative engineering business developing advanced train-borne monitoring and intelligent technology solutions.
This is an exciting opportunity to work across the full systems engineering lifecycle, supporting the development of complex electronic systems from concept through to customer deployment.
This role would suit an engineer with experience in systems engineering, technical bids, systems integration or multidisciplinary engineering, looking to work on cutting-edge rail technology within a collaborative engineering environment.
Responsibilities include:
Develop system architectures, high-level designs and engineering documentation.
Capture and manage customer requirements throughout the project lifecycle.
Support technical bids, proposals, compliance matrices and engineering estimates.
Coordinate the integration of hardware, software and communication systems.
Produce interface specifications and support verification and validation activities.
Support installation, commissioning and customer acceptance testing.
Liaise with customers, suppliers and internal engineering teams to resolve technical challenges.
Identify technical risks and contribute to project planning and delivery.
Key skills & experience:
Degree in Systems, Electronic, Electrical or Computer Engineering (or equivalent experience).
Experience within systems engineering or complex multidisciplinary engineering environments.
Ability to interpret technical specifications and customer requirements.
Knowledge of the systems engineering lifecycle and requirements management.
Experience producing technical documentation and engineering specifications.
Understanding of networking and communication protocols such as Ethernet, TCP/IP, RS232 or RS485.
Excellent communication and problem-solving skills.
Rail, video systems, embedded electronics or systems integration experience would be advantageous.
APPLY NOW
This Systems Engineer job based in Gateshead, Tyne and Wear could be of interest to you.
To apply, please send your CV to adighton@redlinegroup.Com or call Adam Dighton on 01582 878821. ....Read more...
Type: Permanent Location: Gateshead, England
Start: ASAP
Salary / Rate: £40000 - £50000 per annum
Posted: 2026-07-29 17:28:08
-
An exciting opportunity has arisen for a Mechanical Design Engineer to join a globally recognised engineering and manufacturing organisation specialising in electronic and electro-mechanical systems and components, primarily for demanding transport and industrial sectors.
Based in Saffron Walden, Essex, this role offers the chance to work on innovative, high-reliability products designed for use in harsh and safety-critical environments.
You will be joining a well-established engineering team focused on delivering high-quality, robust solutions across a range of complex programmes.
Duties of the Mechanical Design Engineer based in Essex
Utilise your mechanical and electro-mechanical engineering expertise to support the design and development of new products
Create and develop detailed 3D CAD models, assemblies, and engineering drawings using industry-standard tools
Design robust enclosures, housings, and mechanical systems for use in harsh and demanding environments
Interpret and evaluate technical requirements to develop effective concept and detailed design solutions
Work across the full product lifecycle, from initial concept through to prototype, testing, and production support
Collaborate with cross-functional engineering teams including electrical, electronic, and manufacturing departments
Support continuous improvement in design quality, manufacturability, and product performance
Key Skills and Experience for the Mechanical Design Engineer based in Essex
Proven experience as a Mechanical Design Engineer within an electro-mechanical or mechanical engineering environment
Strong proficiency in CATIA and/or SolidWorks, including complex part modelling, assemblies, and detailed drawings
Experienced in producing fully dimensioned engineering drawings with appropriate linear and geometric tolerancing (GD&T)
Strong understanding of mechanical engineering principles, manufacturing processes, and industry standards
Solid experience in Design for Manufacturability (DFM) and Design for Assembly (DFA)
Experience designing products for harsh, ruggedised, or safety-critical environments (e.G.
Rail, defence, aerospace, industrial) would be highly advantageous
This is an excellent opportunity for an ambitious engineer looking to further develop their career within a long-standing and highly respected UK manufacturer, working on technically challenging and innovative engineering projects.
To apply for the Mechanical Design Engineer position based in Saffron Walden, Essex, please send your CV to nking@redlinegroup.Com or for more information contact Nicola King on 01582 878839 ....Read more...
Type: Permanent Location: Essex, England
Start: ASAP
Salary / Rate: £45000 - £50000 per annum
Posted: 2026-07-29 16:18:09
-
A fantastic job opportunity for a Supplier Quality Engineer has arisen in Great Yarmouth, Norfolk, with a company offering a 9-day working fortnight!
This exciting new job for a Supplier Quality Engineer, based in Great Yarmouth, Norfolk, will see you a pivotal role in supplied product and services into the organisation, to comply within their highly regulated environment to AS9100.
The Supplier Quality Engineer located in Great Yarmouth, Norfolk will be supporting the supplier approval process, supplier performance management, implementing supplier corrective actions and supplier auditing to AS9100.
The ideal Supplier Quality Engineer, based in Great Yarmouth, Norfolk will have;
Experience working within an electronic, electrical or highly complex precision manufacturing industry
Background in either Defence / Military, Aerospace or Space sectors
Supplier auditing experience to ISO9001 or AS9110 standards
This is for a company that specialise in the design and manufacture of secure communication devices for predominately the defence and aerospace sectors.
APPLY NOW! For the Supplier Quality Engineer job located in Great Yarmouth, Norfolk by sending a cover letter and CV to TDrew@redlinegroup.Com or by calling Tom Drew on 01582 878848 quoting ref.
THD1234.
Alternatively, if this job is not suitable but you are looking for a job within Quality, please call 01582 878 848 for a confidential discussion. ....Read more...
Type: Permanent Location: Great Yarmouth, England
Start: ASAP
Salary / Rate: £40000 - £45000 per annum
Posted: 2026-07-29 14:17:48
-
Supplier Business Development Manager - Semiconductors (AMD/Xilinx)
Istanbul or Ankara, Turkey | Hybrid
€70,000 - €90,000 OTE + Company Car + Excellent Benefits
Are you an experienced business development or technical sales professional with a background in semiconductors or electronic components?
Do you enjoy identifying new market opportunities, developing supplier strategies and working closely with customers, suppliers and technical teams? If so, this is an excellent opportunity to join a global leader in semiconductor distribution.
The Opportunity
As the Supplier Business Development Manager, you will take ownership of driving growth for a portfolio of world-leading semiconductor suppliers, with a particular focus on AMD/Xilinx technologies.
Rather than carrying a traditional sales territory, you will work across the Turkish market to develop supplier strategy, identify new opportunities and support the wider sales organisation in winning business.
Approximately 90% of your focus will be within Turkey, with occasional support across parts of the Middle East and Greece.
This is a highly visible position where you'll work closely with Account Managers, Field Application Engineers and supplier partners to maximise design wins and revenue growth.
Key Responsibilities
Develop and execute business growth strategies for assigned semiconductor suppliers.
Drive market development activities across Turkey.
Identify new business opportunities and emerging market trends.
Support and coach Account Managers and Field Application Engineers on product positioning and customer opportunities.
Deliver supplier updates, product training and market intelligence to internal teams.
Prepare and lead Quarterly Business Reviews (QBRs), including presentations, action plans and performance analysis.
Build strong relationships with key supplier partners and strategic customers.
Support supplier events, customer workshops and marketing activities where required.
About You
We're looking for a commercially focused semiconductor professional who understands the Turkish electronics market.
You may currently be working as a:
Business Development Manager
Technical Business Development Manager
Technical Sales Manager
Product Marketing Manager
Product Manager
Supplier Manager
Technical Account Manager
Experience we're looking for:
Experience within semiconductor or electronic component distribution.
Strong knowledge of the Turkish electronics and semiconductor market.
Commercial mindset with a proven track record of developing business opportunities.
Ability to communicate technical concepts to both customers and internal teams.
Strong presentation and stakeholder management skills.
Fluent English communication skills.
Experience with AMD/Xilinx products would be highly advantageous, although candidates with broader semiconductor experience are encouraged to apply.
What's on Offer
€70,000 - €80,000 On-Target Earnings (with flexibility for exceptional candidates)
Company Car
Comprehensive Benefits Package
Hybrid working
The opportunity to work with market-leading semiconductor technologies and globally recognised suppliers.
Excellent career development within an international organisation at the forefront of the electronics industry.
To apply for the Supplier Business Development Manager position, please contact Yuon Skelton - yskelton@redlinegroup.Com ....Read more...
Type: Permanent Location: Turkey
Start: ASAP
Salary / Rate: €70000 - €90000 per annum
Posted: 2026-07-29 10:53:11
-
JOB DESCRIPTION
Typical tasks for this position include (but are not limited to) the following:
Monitor product quality to ensure compliance to standards and specifications.Develop an understanding with supervision of the fundamentals of coatings technology.Compile results of tests and analyses.Set up and conduct experiments, tests, and analyses using standard paint test procedures and physical and chemical techniques.Conduct chemical and physical laboratory tests to assist scientists in making qualitative and quantitative analyses of solids, liquids, and gaseous materials, and document all experimental results.Provide and maintain a safe work environment by participating in safety programs, committees, or teams, and by conducting laboratory and plant safety audits.Prepare paint batches for products and following standardized formulas, or create experimental formulas.Preform lab support activities which may include routine maintenance or upkeep of equipment and lab areas such as salt fogs, QUV'S, milling room, hot room, or controlled temp.
& humidity cabinet.
Responsibilities/Expectations:
Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person.Maintain a good record of attendance and punctuality.Learn all manual tasks performed within the department.Perform tasks assigned using specific operating procedures and following department specific quality control processes and procedures.Treat people with dignity and respect.Conduct all business with integrity.Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities.Follow all safety procedures and company policies.
QUALIFICATIONS:
Chemistry - Knowledge of the chemical composition, structure, and properties of substances and of the chemical processes and transformations that they undergo.
This includes uses of chemicals and their interactions, danger signs, production techniques, and disposal methods.English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar.Computers and Electronics - Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming.Mathematics - Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications.Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance.Engineering and Technology - Knowledge of the practical application of engineering science and technology.
This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services.Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.High school graduate or equivalent (GED) with a focus in the sciences, with chemistry and related sciences preferred.
Skills
Science - Using scientific rules and methods to solve problems.Reading Comprehension - Understanding written sentences and paragraphs in work related documents.Quality Control Analysis - Conducting tests and inspections of products, services, or processes to evaluate quality or performance.Mathematics - Using mathematics to solve problems.Operation Monitoring - Watching gauges, dials, or other indicators to make sure a machine is working properly.Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.Time Management - Managing one's own time and the time of others.Writing - Communicating effectively in writing as appropriate for the needs of the audience.Active Learning - Understanding the implications of new information for both current and future problem-solving and decision-making.
DESCRIPTION OF POSITION DUTIES/TASKS:
Satellite Hazardous Waste Accumulation
Production tank/Cleaning/filling
1.
Production Quality Lab Technicians may have to dispose of product samples, line flush, off-spec product, or expired product retain samples.
This waste material is transferred to the hazardous waste satellite accumulation drum.
2.
Production workers clean equipment and tanks pre-rinse, wipe, scrub, and final rinse surfaces using wash solvent, brushes and rags.
Dirty solvent is transferred to the satellite accumulation area.
3.
Transfer used wash solvent to the satellite accumulation drum or tank.
4.
Ensure hazardous waste storage or accumulation containers remain sealed except during the addition or removal of waste.
5.
Ensure Hazardous Waste storage containers are clearly labeled "Hazardous Waste."
6.
Care must be exercised when introducing waste into the satellite accumulation drum.
Do not drop on floor or area.
In the case of any spilled material, spills or drops shall be cleaned up immediately.
7.
When 55 gallons has accumulated, the satellite accumulation container must be moved to a permanent hazardous waste storage area within 3 days and relabeled "Hazardous Waste."
REQUISITE SKILL, EDUCATION, OR OTHER QUALIFICATIONS:
1.
Knowledge and understanding of the chemical characteristics of the wastes which they are assigned to handle or control (i.e., flammability, toxics, incompatibilities, etc.).
2.
Type of protective equipment and clothing to be worn.
3.
Knowledge of what to do or who to notify in the event of a release, fire, or explosion.
4.
Knowledge of communication and alarm system.
5.
Know procedures for using facility emergency equipment.
6.
Predetermined responses and methods to control releases, fires, or explosions.
7.
Ability to shut down operations.
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis.
Rust-Oleum is an equal-opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Brooklyn Park, Minnesota
Posted: 2026-07-28 23:26:24
-
An Instrumentation Test & Process Improvement Engineer is sought to join a growing engineering and manufacturing business in Banbury, Oxfordshire, supporting the testing, calibration, and continuous improvement of advanced environmental monitoring instrumentation.
The Instrumentation Test & Process Improvement Engineer, Banbury, Oxfordshire, will be expected to combine hands-on production testing with continuous improvement activities, working closely with Production and R&D teams to enhance manufacturing processes, improve product reliability, and support the development of innovative monitoring solutions used by customers worldwide.
Responsibilities include:
Perform final testing, inspection, calibration, and certification of industrial monitoring instruments.
Assemble, configure, troubleshoot, and repair optical, electrical, and mechanical instrumentation.
Carry out fault finding and repair of production and returned products to component level.
Maintain and calibrate test equipment to ensure accurate and reliable product testing.
Develop and improve test procedures to increase efficiency, quality, and consistency.
Analyse production test data to identify recurring issues and recommend process improvements.
Work closely with R&D and Engineering teams to implement design and manufacturing improvements.
Support continuous improvement initiatives using Lean, Six Sigma, or similar methodologies.
Produce and maintain accurate technical documentation, calibration records, and test reports.
Contribute to new product introduction and wider engineering improvement projects.
Key skills & experience:
HNC/HND in Electronics, Electrical Engineering, or equivalent industry experience.
Experience testing, calibrating, fault finding, and repairing electronic or instrumentation products.
Strong understanding of electronics, measurement systems, and production test environments.
Experience working within manufacturing, instrumentation, or test engineering environments.
Knowledge of continuous improvement methodologies such as Lean or Six Sigma.
Ability to analyse technical data and identify opportunities for process optimisation.
Practical experience using electronic test equipment and hand tools.
Strong communication skills with the ability to work across Production and Engineering teams.
High level of computer literacy, including Microsoft Office.
Self-motivated with excellent analytical and problem-solving skills.
How to apply:
Apply now for the Instrumentation Test & Process Improvement Engineer role in Banbury, Oxfordshire.
Send your CV to adighton@redlinegroup.Com or call Adam Dighton on 01582 878821. ....Read more...
Type: Permanent Location: Banbury, England
Start: ASAP
Salary / Rate: £40000 - £50000 per annum
Posted: 2026-07-28 12:50:20
-
Are You an Electronics Test Support Engineer with Experience in ATE Systems?
This is a great chance to join a global technology manufacturer at the forefront of advanced electronics, software and high-tech industrial solutions.
With a long-standing reputation for innovation and engineering excellence, the company, based in Eastbourne, develops sophisticated products used in cutting-edge industries including semiconductor manufacturing, scientific research, renewable energy and advanced industrial applications.
The Role
As an Electronics Test Support Engineer based in Eastbourne, you will provide hands-on support for Automated Test Equipment (ATE), helping to ensure production runs efficiently and test systems operate at optimum performance.
You'll be responsible for troubleshooting test-related issues, maintaining equipment, repairing test fixtures and supporting continuous improvement activities across the production facility.
This is an excellent opportunity for a practical engineer who enjoys fault finding, problem solving and working across the interface of electronics, software and instrumentation.
Key Responsibilities for this Electronics Test Support Engineer based in Eastbourne;
Provide first-line support for automated and semi-automated test systems.
Diagnose and resolve hardware, software and instrumentation issues.
Carry out preventative maintenance and repair of test equipment and fixtures.
Respond to production test support requests and minimise downtime.
Support engineering projects, including upgrades and redesigns of legacy test stations.
Assist with validation, commissioning and duplication of test systems.
Work closely with engineering, manufacturing and production teams to deliver robust test solutions.
For this Electronics Test Support Engineer based in Eastbourne you need;
Experience supporting ATE, production test equipment or electronic test systems within a manufacturing environment.
Strong understanding of electronics and practical fault-finding techniques.
Ability to interpret electronic schematics and system diagrams.
Experience with test automation environments such as C#, LabVIEW, Python or similar.
Hands-on experience with electronic test fixtures, instrumentation and measurement equipment.
Degree, HNC or HND in Electronic Engineering, Electrical Engineering, Test Engineering or a related discipline.
Proven background in test engineering, production test support or electronics manufacturing.
Interested? Please send your CV to Kyle Graveney at KGraveney@redlinegroup.Com or call on 01582878817. ....Read more...
Type: Permanent Location: Eastbourne, England
Start: ASAP
Salary / Rate: £34000 - £40000 per annum
Posted: 2026-07-28 09:58:19
-
A position for a Technical Director role based in Catterick Garrison, North Yorkshire has become available, with a leading UK supplier and distributor of electronic components and value-added technical solutions.
We are currently recruiting on behalf of a well-established electronics distribution and technology solutions business that works with world-leading manufacturers across custom batteries, power supplies, semiconductors, displays, electromechanical components, IoT devices, microcontrollers, PCBs and EV charging solutions.
My client is backed by NVM Private Equity following a £24m management buyout, which continues to strengthen its position as a trusted technical distribution and design-led solutions partner.
The Technical Director job, based in Catterick Garrison, North Yorkshire, will report directly to the CEO and sit as part of the Senior Management Team (SMT), leading the technical team while driving product strategy, design funnel growth, supplier engagement, and technical sales support across the Group.
Ideal candidates for the Technical Director job will have experience in the following areas:
Leading and developing technical and/or sales teams, including coaching, performance management and recruitment.
Managing a sustainable design funnel and converting projects into design wins and production business.
Creating and implementing product strategies that support sales growth and market share objectives.
Working closely with Sales, Account Management and Purchasing teams to maximise commercial opportunities and maintain profitable margins.
Developing strong relationships with customers, suppliers and key stakeholders at a senior level.
Managing supplier growth plans, quarterly business reviews (QBRs), and identifying opportunities for new franchise partnerships.
Providing technical support throughout the product design cycle, from evaluation and testing through to production and long-term customer support.
Driving KPIs, reporting performance metrics to SMT and Board level, and ensuring high levels of team performance.
Acting as the technical expert within a designated technology sector and identifying emerging market trends and technologies.
Supporting marketing activities including webinars, exhibitions, social media campaigns and supplier-focused promotional activities.
The successful candidate will ideally possess:
Extensive knowledge and expertise within a relevant electronics technology area.
Experience within electronics distribution, franchise distribution, or electronic component sales.
A strong commercial mindset with the ability to drive revenue growth and design-win activity.
Experience working directly with OEM customers and supporting product design-in activities.
An Electronics or Engineering degree, or equivalent qualification (desirable).
This is a fantastic opportunity for an experienced Technical Manager, Applications Engineering Manager, Business Development Director, or Senior Technical Sales professional looking to take on a strategic leadership role within a growing and highly respected electronics group.
To apply for this Technical Director role in Catterick Garrison, North Yorkshire, please contact Tony Broadhurst on 01582 878841 or email Tbroadhurst@RedlineGroup.Com quoting reference TDB1343.
Alternatively, we welcome conversations regarding similar opportunities within Technical Leadership, Engineering Management, and Electronics Distribution sectors. ....Read more...
Type: Permanent Location: Catterick Garrison, England
Start: ASAP
Salary / Rate: £85000 - £90000 per annum
Posted: 2026-07-28 08:58:18
-
An exciting opportunity has arisen for a Senior Electronic Engineer based in Milton Keynes, Buckinghamshire, to join a leading engineering company that design a range of electronic systems for aerospace and defence applications.
The main purpose of the Senior Electronic Engineer role, based in Milton Keynes, Buckinghamshire, is to be the technical lead for electronic modules used in high-reliability industries.
This role is focused on the architecture, design, development, and validation of new electronic module designs, with strong ownership from early requirements capture through to design release and onto production.
We are looking for a Senior Electronic Engineer with a strong analogue, mixed-signal, power, sensing, or signal-conditioning design experience.
This is a great opportunity to join a highly successful, multi-national engineering company with a fantastic working environment and benefits.
Apply Now, if this Senior Electronic Engineer job based in Milton Keynes, Buckinghamshire sounds like the opportunity for you, click the APPLY NOW button, or alternatively call Tom Drew on 01582 878 848 or email TDrew@redlinegroup.Com quoting THD1376.
Alternatively, if this job is not suitable but you are looking for a job within Engineering, please call 01582 878 848 for a confidential discussion.
....Read more...
Type: Permanent Location: Milton Keynes, England
Start: ASAP
Salary / Rate: £50000 - £80000 per annum
Posted: 2026-07-27 14:33:24
-
Are you looking to work for a global leading technology company? Are you keen work with cutting edge instrumentation? If so, then our client has the role for you!
In this Senior Electronics Engineer - Analogue/Digital job you must have electronics and engineering knowledge and experience in combination with good design and problem-solving ability to develop products that meet performance and cost targets and that are completed on time.
You will operate in a central role within a multidisciplinary project team and take responsibility for technical leadership, product specification, systems design, evaluation programs and troubleshooting.
An understanding of all aspects of system design is critical.
To apply for this Senior Electronics Engineer - Analogue/Digital job you will require a combination for the following skills:
Minimum of good Honours Degree in Electronics
Approximately 5 years practical experience in design and development of new products in one or more of these areas:
Analogue circuit design, layout and optimisation, specifically for low signal amplification and high-performance closed loop systems.
Digital signal processing, including an excellent understanding and application of sampling theory, noise reduction, filtering and digital signal conditioning
VHDL (less important)and low-level programming in C and assembler - useful
EMC / compliance testing
This is a fantastic role working for a business with a growing R&D team.
They are keen for someone to join the business who is passionate about engineering & is looking for a long term & progressive career within the business.
To apply for this Senior Electronics Engineer - Analogue/Digital job please email rwilcocks@redlinegroup.Com or phone 01582 87 8810. ....Read more...
Type: Permanent Location: Beaconsfield, England
Start: ASAP
Salary / Rate: £40000 - £70000 per annum
Posted: 2026-07-27 00:00:15
-
Are you an experienced Electronics Design Engineer seeking a new opportunity to join a well established company based in Chelmsford Essex?
My Chelmsford based client are a global leader in specialised components and subsystems for innovative solutions in medical, science, aerospace and industrial applications.
The products they produce are everywhere, hospitals, planes, ships and even outer space.
This role will enable you to develop and gain experience in the ideas that are behind some of the most advanced technologies in the world.
You will also get a chance to work alongside highly experienced engineers, technicians and scientists.
This is a crucial role within my Chelmsford based company ; the role is to be part of a High voltage electronics team to support product development, from design, realisation, design proving and implementation.
Responsibilities for the Electronics Design Engineer:
Development and design specifications for product/systems
Follow design processes from concept through to production.
Work under a Technical Authority and Product Authority who will guide the development
Experience & Skills for the Electronics Design Engineer:
Industry experience with design of HV power electronics for volume products, from top level design through to detailed design and verification.
Experience of test and commissioning high voltage systems and use of electrical, electronic and microwave test and measurement equipment.
Knowledge of PCB design techniques.
Knowledge of industrial compliance requirements including legislative, EMC/EMI & environmental testing.
Experience of complete product life cycle design.
This is a great chance for an experienced Electronics Design Engineer to join a growing company who can offer the opportunity for career progression and personal development.
To apply for the Electronics Design Engineer role, please send your CV Rwilcocks@redlinegroup.Com, or for more information contact Ricky on 01582 878810 ....Read more...
Type: Permanent Location: Chelmsford, England
Start: ASAP
Salary / Rate: £35000 - £50000 per annum
Posted: 2026-07-27 00:00:13
-
We are partnered with a growing business building specialist electronics systems used in demanding industrial and scientific applications.
They are looking for a FPGA Design Engineer to build products that are high performance, reliable, and built to solve real-world challenges for global customers.
In this FPGA Design Engineer role, you will:
Develop FPGA solutions for high-speed imaging and data capture
Own FPGA tasks across new product designs, from initial concept to verification and support
Work closely with hardware, software, and systems engineers to deliver production-ready designs
Input into system architecture, specs, and ongoing improvements across the product range
The ideal FPGA Design Engineer will have:
Experience designing FPGAs
Hands-on background in high-speed digital or data-heavy systems
Strong electronics or engineering foundation with a practical mindset
Interest in imaging, embedded systems, or technically demanding hardware
The role comes with a competitive salary, benefits, bonus potential, opportunity for flexible working, and plenty of scope to make a real impact.
To apply for this FPGA Design Engineer role, click apply, send your CV to rwilcocks@redlinegroup.Com or call Ricky Wilcocks on 01582 878810. ....Read more...
Type: Permanent Location: Berkshire, England
Start: ASAP
Salary / Rate: £45000 - £75000 per annum
Posted: 2026-07-27 00:00:13
-
Radar Systems Analyst required to join a team developing advanced radar systems.
You will model, design, and analyse radar and related systems, support hardware and software development, and develop digital signal processing algorithms.
Key Requirements
Bachelor or Master degree in Engineering, Physics, or Mathematics.
Experience with MATLAB and digital signal processing.
Knowledge of radar or related technologies ( sonar, image processing, communications).
Strong team player with good written and verbal communication.
Willingness to travel in the UK and overseas.
Desirable
Radar concepts Pulse Compression, Doppler, CFAR.
Experience with Phased Array Radar, FPGA, Linux, RF electronics.
Programming in Python, C++ and lab hardware testing experience. ....Read more...
Type: Permanent Location: Waltham Cross, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £68000 Per Annum None
Posted: 2026-07-26 23:35:05
-
Systems Engineer required ideally with Maritime Defence or Radio Naval Navigation industry experience to manage external customer driven product concept, design, development and delivery with cross functional internal teams including Software, Mechanical and Electrical disciplines.
Requirements
British Citizen eligible for UK Security clearance.
Defence engineering experience of systems and product lifecycles from concept design, integration and test.
Valid UK Driving License
Beneficial
Radar, Radio System, communications protocols systems and bid proposal knowledge.
Naval Platform, Navigation equipment electronics EMC, ESD skills.
This is a fantastic opportunity to join a cutting edge technical team working on very exciting detection and navigation military systems. ....Read more...
Type: Permanent Location: Enfield, England
Start: ASAP
Duration: Permanent
Salary / Rate: £60000 - £78000 Per Annum None
Posted: 2026-07-26 23:35:05
-
Technical Account Manager
Finland | Remote / Field-Based
€90k - €100k OTE + Company Car + Excellent Benefits
Are you an electronics professional who enjoys solving complex technical challenges and building long-term customer relationships?
Perhaps you're currently working within semiconductor distribution, embedded computing, electronics manufacturing or technical sales and are looking for an opportunity where your technical expertise is genuinely valued—not simply measured by the number of products you sell.
Our client is one of Europe's most respected specialist technology distributors, partnering with many of the world's leading semiconductor manufacturers.
Their reputation has been built over decades by helping engineering teams solve complex design challenges and bringing innovative technologies to market.
As part of continued investment in the Finland region, they are looking to appoint a Technical Account Manager to join a highly experienced, collaborative team with exceptional staff retention and a genuine passion for technology.
The Opportunity
This is not a catalogue sales role.
You'll become a trusted technical advisor to key customers, working directly with design engineers, R&D teams and technical decision-makers to understand future projects, influence product selection and deliver innovative semiconductor and embedded technology solutions.
Working alongside specialist application engineers across Europe, you'll help customers navigate increasingly complex technologies while developing long-term strategic relationships that drive sustainable business growth.
You'll inherit established accounts whilst also identifying new design opportunities within existing customers and selectively developing new business where genuine long-term potential exists.
What You'll Be Doing
Develop trusted relationships with engineering teams, technical decision-makers and key stakeholders.
Support customers throughout the complete product development and design cycle.
Identify new design opportunities and generate demand for leading semiconductor and embedded technologies.
Translate customer requirements into practical technical solutions.
Collaborate closely with internal application engineers, supplier partners and commercial teams.
Build strategic account plans focused on long-term growth rather than transactional sales.
Conduct regular customer reviews and identify opportunities to expand existing relationships.
Stay up to date with emerging technologies, semiconductor market trends and competitor activity.
Manage your sales pipeline and deliver sustainable revenue growth across your territory.
About You
We're looking for someone who combines strong commercial awareness with genuine technical credibility.
You may currently be working as a:
Technical Account Manager
Field Sales Engineer
Technical Sales Engineer
Application Engineer looking to move into sales
Electronics Design Engineer with customer-facing experience
You'll ideally have:
A degree or equivalent qualification in Electronics Engineering or a related discipline.
A solid understanding of electronics and embedded systems.
Experience working with semiconductor, electronic component or embedded technology solutions.
The ability to communicate confidently with design engineers and technical stakeholders.
A consultative approach to business development and account management.
Excellent relationship-building and communication skills.
A genuine passion for technology and continuous learning.
Experience within semiconductor distribution would be advantageous, although candidates from electronics manufacturers, Embedded computing businesses or OEM environments are equally encouraged to apply.
Why Join?
This is an opportunity to join an organisation that genuinely invests in its people.
You'll become part of a small, highly collaborative team where knowledge sharing, technical excellence and long-term customer relationships are valued above short-term sales targets.
Many employees have built long careers within the business, creating a supportive environment where you'll be encouraged to develop both technically and commercially.
To apply for the Technical Account Manager position please contact yskelton@redlinegroup.Com
....Read more...
Type: Permanent Location: Finland
Start: ASAP
Salary / Rate: €90000 - €100000 per annum
Posted: 2026-07-24 16:41:58
-
A Product Development Engineer is sought to join an innovative engineering business in Gateshead, Tyne & Wear, supporting the development, enhancement, and lifecycle management of advanced rail safety and surveillance systems.
The Product Development Engineer, Gateshead, Tyne & Wear, will be expected to act as the technical expert for key product lines, driving product improvements, supporting customers, and ensuring products remain compliant with industry and safety standards.
Working closely with engineering, production, and commercial teams, you will play a key role in delivering innovative solutions that support the company's long-term technology roadmap.
Responsibilities include:
Act as the technical expert for the company's rail safety and surveillance product portfolio.
Support product development activities from concept through to production and in-service support.
Provide technical input for customer tenders, proposals, and new product initiatives.
Investigate, diagnose, and resolve hardware, software, and system-level technical issues.
Develop and maintain technical documentation, product datasheets, system schematics, and test specifications.
Ensure products comply with relevant industry standards, including Safety Integrity Level (SIL) and cybersecurity requirements.
Work with cross-functional teams to identify and implement product improvements.
Support production with technical guidance, validation, and product release activities.
Build strong customer relationships and provide technical support during product lifecycle activities.
Contribute to technology roadmaps and continuous product innovation.
Key skills & experience:
Degree in Electronics Engineering, Systems Engineering, or equivalent industry experience.
Experience in product development within electronics, embedded systems, or engineering environments.
Knowledge of electronic hardware design and system integration.
Experience supporting IP-based CCTV, video, or networked electronic systems.
Understanding of communication protocols including Ethernet, TCP/IP, RS232, and RS485.
Strong technical problem-solving and troubleshooting skills.
Excellent communication and stakeholder management abilities.
Experience working across the full product lifecycle would be advantageous.
Knowledge of C/C++, Safety Integrity Level (SIL), or rail technologies would be beneficial.
Self-motivated with strong organisational skills and the ability to manage multiple priorities.
How to apply:
Apply now for the Product Development Engineer role in Gateshead, Tyne & Wear.
Send your CV to adighton@redlinegroup.Com or call Adam Dighton on 01582 878821. ....Read more...
Type: Permanent Location: Gateshead, England
Start: ASAP
Salary / Rate: £40000 - £60000 per annum
Posted: 2026-07-24 16:33:45
-
Systems Engineer required ideally with Maritime Defence or Radio Naval Navigation industry experience to manage external customer driven product concept, design, development and delivery with cross functional internal teams including Software, Mechanical and Electrical disciplines.
Requirements
British Citizen eligible for UK Security clearance.
Defence engineering experience of systems and product lifecycles from concept design, integration and test.
Valid UK Driving License
Beneficial
Radar, Radio System, communications protocols systems and bid proposal knowledge.
Naval Platform, Navigation equipment electronics EMC, ESD skills.
This is a fantastic opportunity to join a cutting edge technical team working on very exciting detection and navigation military systems. ....Read more...
Type: Permanent Location: Waltham Cross, England
Start: ASAP
Duration: Permanent
Salary / Rate: £63000 - £75000 Per Annum None
Posted: 2026-07-24 12:45:23
-
We are looking for a Senior RF Engineer to lead the design, development, and testing of RF, microwave, and antenna systems used in advanced electronic products.
Key responsibilities
Lead RF and antenna design projects (including modules and sub-contracted work)
Design and optimise microwave PCB layouts and RF systems
Perform RF component selection and system-level analysis
Support antenna design, modelling, testing, and validation
Troubleshoot RF production issues and perform root cause analysis
Work closely with manufacturing, supply chain, quality, and customers
Ensure engineering standards, documentation, and procedures are followed
Key Skills
RF PCB design at microwave frequencies
Strong knowledge of RF components (amplifiers, filters, mixers, PLLs)
RF system design (cascade analysis)
Experience with RF test equipment (VNA, spectrum analysers)
Antenna design knowledge (including array and printed antennas)
Altium and RF simulation tools
Radar or communications background
MATLAB and Python for test automation ....Read more...
Type: Permanent Location: Enfield, England
Start: ASAP
Duration: Permanent
Salary / Rate: £55000 - £80000 Per Annum None
Posted: 2026-07-24 12:41:10
-
Microwave Antenna and RF Design Engineer required to join an RF Microwave module design, development, test as well as antenna design, modelling and requirement translation.
Requirements
Microwave frequency PCB Design experience
RF system design knowledge of cascade analysis or receiver to transmitter performance
High Power RF amplifier, Low Noise Amplifiers, Limiters, Circulators, Filters, Mixers, Phase Locked Loop usage design, build and test.
Antenna theory and design with array antennas slotted array and printed antennas.
Altium, Altair, digital electronics, power electronics etc.
beneficial.
Responsibilities
Antenna and RF equipment design, development and delivery. ....Read more...
Type: Permanent Location: Waltham Cross, England
Start: ASAP
Duration: Permanent
Salary / Rate: £57000 - £85000 Per Annum None
Posted: 2026-07-24 12:35:53
