-
Motion control Embedded Software Engineer required to develop motor control systems, motion sensors and their interfaces.
Skills
Embedded software development including Embedded Linux.
Firmware design and debug, Protocol sniffers, Oscilloscope etc.
Communication protocol knowledge.
Electronic or Electrical Engineering degree.
Role
Programming Embedded C, firmware for microprocessors ARM, STM32 and DSPs.
Type: Permanent Location: Edenbridge, England
Start: ASAP
Duration: Permanent
Salary / Rate: £34000 - £52000 Per Annum None
Posted: 2025-03-13 17:22:44
-
Converter and Inverter Embedded Power Electronics Engineer to join an existing Electronic Engineering team working from requirements capture, design and development of low cost, high reliability electronic and electric systems.
You will have strong general electronic design and embedded firmware development ideally from the perspective of Power Electronics working through prototypes with test equipment and rework.
Skills
3 phase inverter, DC to DC converter, microcontroller and analogue electronic design.
PCB layout design of batteries, electric machines and wiring for manufacture.
Full electronics product life cycle design, requirement, prototype, test, rework and support.
Verification and validation test and simulation.
Schematic and assembly drawing using CAD tools.
EMC for power electronics
Beng in electronics, electrical engineering, mechatronics or related.
Hands on commercial experience in a similar Electronics development role.
Role
Design and build electronic components and circuits.
Design, analyse, and verify electronics systems throughout the engineering lifecycle.
Collaborate with Systems and Software engineers and on other cross functional teams on any issues.
Support manufacturing quality test and production where needed. ....Read more...
Type: Permanent Location: Greenford, England
Start: ASAP
Duration: Permanent
Salary / Rate: £32000 - £58000 Per Annum None
Posted: 2025-03-13 17:16:29
-
Embedded Digital Electronics Design Engineer required to design military aerospace technology products.
You will have embedded control system design experience in automotive, telecoms, aerospace or medical sectors and degree qualified in electronics.
Key Skills
Embedded controller design in FPGA, Processor and Micro Controllers.
Embedded controller hardware design and development.
Circuit simulation and design in DOORS, SPICE, Saber, SiMetrix, EWB, TINA, Mathcad, MATLAB, Simulink and Xilinx.
Communication protocol design CAN, ARINC and AFDX.
Precision analogue and digital electronics circuit design, LVDTs, Resolvers, Temperature and Pressure Sensors, Solenoids and PWM circuits.
PCB layout and design for signal integrity and EMC.
DFM, DFT designing to cost requirements.
Design verification, test specification and quality reporting.
PCB design, schematic capture and circuit simulation.
Mentor Graphics, Cadence design tools
VHDL, Python and C advantageous.
PCB design in Mentor Graphics or Cadence.
....Read more...
Type: Permanent Location: Birmingham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £70000 Per Annum None
Posted: 2025-03-13 17:10:01
-
Electronic Engineer required to work on new product development by supporting the hardware design of embedded electronics systems using microprocessors, power supplies, sensor interfacing, power systems control including relays, triacs, stepper motors and user interfaces.
Experience
8, 16 and 32 bit microcontrollers also familiarity with ST, Atmel or Microchip products would be advantageous.
Circuit design and PCB layout for EMC design consideration, ideally OrCAD.
Embedded C ideally Keil or IAR.
EMC compliance testing.
Interaction of electro mechanical products and mechanisms or experience of control and system design would be desirable
The ideal candidate will be a degree qualified Electronic Engineer with an interest in consumer electronics product design and 3 to 5 years industry experience. ....Read more...
Type: Permanent Location: Cheltenham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £28000 - £45000 Per Annum None
Posted: 2025-03-13 17:05:54
-
Embedded Software Engineer with bare metal programming required to write low level code for embedded systems in C and C++.
The Embedded Software Engineer will develop firmware and software for new and existing products as part of a project team contributing to design discussions and activities.
This is a Hybrid role with three days a week working from the office.
???Requirements
1 or 2 years Embedded C and C++ Design and Development experience.
Electronics degree or other relevant subject.
Real time embedded programming and debugging skills.
Diagnostic tool and measurement equipment knowledge.
FreeRTOS exposure would be an advantage.
Responsibilities
Design, Develop and test firmware for new and existing products.
Develop test software and procedures, e.g.
test automation.
Evaluate new technologies and products.
Take part in design architecture and code reviews. ....Read more...
Type: Permanent Location: Buckingham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £35000 - £45000 Per Annum None
Posted: 2025-03-13 17:03:51
-
Graduate Internal Auditor - Internal Audit Management & Consultancy - Cannock
A great opportunity has become available for a graduate in Internal Audit Management & Consultancy.
You will be joining a growing Internal Auditing business in Cannock, a company with a successful track record of developing junior Internal Auditors into more senior positions with more responsibility, which will help develop your career.
To begin with, you will need to be in the office daily, but once you have been fully trained, the role will become hybrid, meaning you will only need to be in the office a couple of days a week.
Specifically, we are looking for you to hold an MSc in Internal Audit Management & Consultancy.
We are open to candidates who have recently graduated or individuals who have moved into a role but have perhaps not been offered the development they expected in an Internal Auditor role.
If you are a recent graduate, any placements during your education would be advantageous.
The company will develop your career, primarily focusing on Internal Auditing for local government, charity, and public services organisations.
Previous individuals who have joined the business have gone on to develop into more senior roles.
In addition, you will be rewarded with an excellent starting salary, the ability to work from home (once trained), and a benefits package.
You will be given a career track that will include obtaining industry qualifications that will help advance your career in the future.
I anticipate significant interest in this role, so I suggest you make an application now or miss out.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices recruitment and Scientific recruitment specialists at Newton Colmore, on +44 121 268 2240, or make an application, and one of our team members at Newton Colmore will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Data Science, Machine Learning, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors.
....Read more...
Type: Permanent Location: Cannock, England
Salary / Rate: Negotiable
Posted: 2025-03-13 14:48:25
-
Internal Auditor - Public Sector Services - Cannock - Homebased
Due to recent expansion, a growing Internal Auditing Organisation is currently looking for a few Internal Auditors to help with their growing workload.
The offices are based in Cannock, but the company offer hybrid working meaning you will only need to be in the office two or three times a week.
The company provides internal auditing services for a range of organisations, mainly in public sector services, charity, and local government sectors.
It would be useful if you have experience in these fields; however, if your internal auditing experience has been varied, it would be good to hear from you.
You will need to have at least 12 months of experience as an Internal Auditor; however, we are open to candidates who have more experience, as the role can be developed into a Senior Internal Auditor role for someone with five plus years of experience.
It would be great if you have any industry qualifications in Internal Auditing or are working towards any qualifications.
The company will help with your qualifications when needed and has been involved with different industry bodies in the past.
This company has a track record of developing the careers of their staff.
If you show initiative and have a productive work rate, hitting deadlines within budget, you can expect regular pay reviews and career opportunities.
Apart from an interesting career path, you will be rewarded with an excellent starting salary, pay reviews, bonus, and other excellent benefits.
Due to the opportunities this role provides, I'm expecting a lot of interest.
So, if you are interested, I suggest making an application now or risk missing out.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices recruitment and Scientific recruitment specialists at Newton Colmore, on +44 121 268 2240, or make an application, and one of our team at Newton Colmore will contact you.
Newton Colmore Consulting is a specialist recruitment company within the Medical Devices, Scientific Engineering, Data Science, Machine Learning, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance, and Field Service Engineering sectors. ....Read more...
Type: Permanent Location: Cannock, England
Salary / Rate: Negotiable
Posted: 2025-03-13 14:47:24
-
Senior Electrical Engineer (Contract)
Location: Weymouth, Dorset, UKContract: Initial 6 months, Outside IR35Rate: £57 per hour (dependent on experience)Start Date: Immediate
Role Overview
We are seeking a highly experienced Senior Electrical Engineer to join our Research and Development team.
This role involves developing innovative solutions for printing systems, factory line processes, and associated modules.
You will tackle complex engineering challenges using cutting-edge technologies, technical analysis, and creative problem-solving.
Key Responsibilities
Develop and implement new designs and systems based on evolving technologies.
Conduct technical risk assessments and recommend mitigation measures.
Prepare and review specifications, ensuring compliance with industry standards.
Collaborate with teams to identify project requirements and deliver technical solutions.
Manage quality, cost, and time balance for assigned tasks.
Actively contribute to continuous improvement by evaluating outcomes and incorporating feedback.
Essential Skills & Experience
Qualifications:
Master's Degree in a technical discipline with mid-level experience or
Bachelor's Degree with senior-level experience, or Chartered Engineer status with mid-level experience.
High-level understanding of electrical, electronic, electromechanical, and mechatronic systems.
Proven experience in the design and assembly of electrical/electronic components and associated cost management.
Technical Proficiency:
Expertise in CAD tools such as ePlan or Altium and EDM systems (e.g., Teamcenter PLM).
Strong understanding of BS EN 61082 standards and related industry benchmarks.
Skilled in measurement, control, and regulation systems, including sensors, actuators, wiring, safety, and circuit design.
Knowledge of EMC and ESD applications and testing.
Desirable Skills
Experience with motion control systems and motor tuning.
Knowledge of PCB layout and SAP systems.
Background in designing special-purpose machinery.
What We Value
Strong problem-solving capabilities and a proactive mindset.
Excellent communication skills to collaborate effectively across teams and stakeholders.
Commitment to quality, sustainability, and health & safety.
Apply Now: Take the next step in your career by joining a team that values innovation, excellence, and professional growth.
Reach out to us for further details and to submit your application. ....Read more...
Type: Permanent Location: Weymouth, England
Start: ASAP
Salary / Rate: Up to £57 per hour
Posted: 2025-03-13 11:43:51
-
We are working with leading provider of industrial automation equipment manufacturer who offers a wide range of products in Science, Engineering, and Technology sectors based in Halifax West Yorkshire, We're recruiting for a Mechanical Design Engineer who can design products and solutions suitable for educational institutions, understanding market trends and latest developments in technology, having some understanding of subject matter and a capability of technical writing as required.
Mechanical Design Engineer: , Use of Solidworks , Ability to produce and maintain of BOM's , Ability to generate costing estimates , Ability to source new components and obtaining quotes and pricing for both standard components and bespoke items , Knowledge of basic machining, sheet metal and bending processes , Knowledge and appropriate selection of common engineering metal alloys such as steels, aluminium etc plus common engineering plastics such as acrylic and ABS , Knowledge and appropriate selection of finishes for aesthetic and corrosion resistance including painting/powder coating, plating, anodising etc. , Knowledge of common place mechanical components such as bearings, couplings, gears, timing pulleys etc and their appropriate limits and fits , Knowledge and appreciation of measuring techniques for mechanical parameters such as force, torque, strain, pressure, flow rate, displacement etc , Good Theoretical Engineering background.
Ability to do design calculations and understand the theories being taught with the equipment. , Be able to work with electrical and electronic engineers in the development of new products, awareness of mounting of PCB's and electrical components such as switches, panel connectors circuit breakers etc , Be able to write technical documentation, both for internal use and as an input into customer facing documents such as product manuals and user information , Ability to perform product demonstrations both internally and externally to customers and end users , Assist in the production of technical briefs for new products
Desirable: , Knowledge of running Solidworks PDM to control CAD models and drawing issues and revisions, or alternatively someone with knowledge about how to handle data files in CAD systems
Great opportunity to be part of a leading bespoke deisgn and manufacturing business who aspire to be the leader in class globally. ....Read more...
Type: Permanent Location: Huddersfield, England
Start: ASAP
Salary / Rate: £42000.00 - £47000.00 per annum + large package
Posted: 2025-03-12 16:15:01
-
Holt Executive is partnered with a leading electro-optics design and manufacturing business, seeking a highly skilled Senior Software Engineer to join their innovative team, supporting cutting-edge video and imaging processing products.
Key Responsibilities for Senior Software Engineer:
- Design, develop, and test application software and Linux drivers for video applications on custom embedded hardware.
- Provide technical support and integration assistance to international customers.
- Develop system specifications, test documentation, and unit tests in a continuous integration environment.
- Fault-find, debug, and resolve issues in complex systems.
- Assist with the administration and successful delivery of engineering projects.
- Continuously improve team procedures and working practices.
- Opportunity to take on team-leading responsibilities if desired.
Key Experience for Senior Software Engineer:
Essential:
- Degree in Computer Science, Electronics, Mathematics, or Physics.
- Proven experience in C++ development for Windows and Linux using Microsoft Visual Studio.
- Expertise in Linux driver development for ARM processors.
- A team player with initiative and adaptability in an Agile environment.
- Strong technical leadership experience.
Desirable:
- Experience in video processing or computer vision algorithms.
- Video streaming application development and HMI development using OpenGL.
- Familiarity with CUDA, OpenCV, and GPU computing technologies.
- Experience interfacing with custom hardware and FPGAs.
- Customer-facing experience.
- Coaching and mentoring abilities to support team talent development.
Why Join?
- Flexible hours: 37.5-hour week with lunchtime finishes on Fridays.
- Hybrid working: Enjoy the flexibility of remote and onsite work.
- Annual leave: 28 days, plus Christmas closure and a holiday purchasing scheme.
- Pension: Matched contributions up to 5%.
- Wellbeing support: Access to remote GP services, mental health pathways, physiotherapy consultations, and more.
- Professional growth: Excellent learning and development opportunities.
- Additional perks: Electric vehicle salary sacrifice scheme, gym discounts, high street rewards platform, and regular sports/social activities.
Security Clearance
Applicants must be eligible for UK Security Clearance, requiring proof of identity, employment history, and UK residency for at least five years.
Ready to make a difference?
Apply now to join a team where innovation meets impact.
Your expertise will drive solutions that are relied upon in critical environments worldwide.
....Read more...
Type: Permanent Location: Barkham,England
Start: 12/03/2025
Salary / Rate: £60000 - £65000 per annum
Posted: 2025-03-12 11:44:07
-
An exciting opportunity has risen for a Software Developer - C# based in Berkshire to join this innovative and successful company, who develop a range of products for varying industries which could include consumer electronics, Aerospace, Automotive and IOT to name a few!
The successful Software Developer - C#, based in Berkshire, will work as an integral member of our project teams, contributing from the initial requirements phase through to testing and deployment.
You will assist in drafting detailed specifications and take part in the design, coding, and prototyping of software solutions.
The Software Developer - C# will have:
A degree in Computer Science, Software Engineering, or very significant proven technical experience.
Experience coding in C# within a commercial setting.
Strong communication skills, both verbal and written.
Strong acceptance of instruction throughout project life cycles.
Self-motivated, with a strong commitment to timekeeping and project deadlines.
Excellent understanding of object-oriented design principles and software design processes.
Some exposure to web design, including the ability to contribute to front-end development initiatives.
APPLY NOW for this fantastic Software Developer - C# job opportunity, based in Berkshire, by sending your cv to blongden@redlinegroup.Com or contact Brett on 01592 878841 or 07961 158773. ....Read more...
Type: Permanent Location: Berkshire, England
Start: ASAP
Salary / Rate: £40000 - £50000 per annum
Posted: 2025-03-12 10:49:24
-
Electronics Engineer - PCB Circuits Design - Didcot
A growing complex technology company, based in Didcot, are currently looking for an experienced Electronics Engineer to help with the PCB circuits design of a range of brand-new Medical Devices that will help with life saving and life improving technologies.
The company are hoping to add skillsets to the business they don't currently have.
Due to this, it would be highly advantageous if you have been an Electronics Engineer who has worked on PCB design and circuits design.
The type of Medical Devices you will be working on will change regularly, due to this it would be beneficial if you have worked on a range of projects during your career.
Due to the highly regulated field you will be working in, past Medical Devices experience would be ideal but we are open to other complex fiends such as wearable tech, biotech, Labtech, wireless tech, technologies that communicate with smart devices etc.
The invention of and improvement of Medical Devices is the core focus of this company, meaning you will always be working on the cutting edge of the sector learning new things all of the time.
As the company grows, I would expect this role to become more senior.
You will be mentoring junior and graduate engineers, so we are looking for someone at senior or principal engineer level.
Apart from having some experience as an Electronics Engineer, it is expected that you would hold a degree within an electronics field, or another role that let you into an electronics engineering role.
This is a great company for advancing your career due to working on complex products continued skills/industry training.
Apart from this you will be rewarded with an excellent starting salary, bonuses, pension, income protection cover, higher than normal holiday allowance and other excellent benefits.
I expect there to be a lot of interest in this role, so if you are interested, I suggest making an application now or risk missing out.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery recruitment specialists, Newton Colmore, on +44 121 268 2240 or submit an application, and a member of our team at Newton Colmore will be in touch with you. ....Read more...
Type: Permanent Location: Didcot, England
Salary / Rate: bonus, pension, income protection
Posted: 2025-03-12 10:16:35
-
A unique opportunity has arisen for a Senior Mechanical Design Engineer to join the world leading Product Design Consultancy based in Warwickshire.
Working with customers across a variety of industries their globally operating development teams have helped to create some of the market-leading products within the medical, scientific, consumer and transport markets.
Due to continued growth, they are seeking a Senior Mechanical Design Engineer to be based from their Warwickshire campus where you will be instrumental in the full concept product development process of a range of complex technology products.
Working closely with customers you will be significant in the development of new designs, evaluation of new technologies and guidance of projects across multiple disciplines.
The role will suit a creative candidate with good problem-solving skills, and someone that is able to generate innovative solutions to design problems.
Key skills and experience for Senior Mechanical Design Engineer:
BENG or CENG qualified with a 1st or a 2:1
Experience of product development from concept to volume manufacturing
Experience of 3D CAD packages
Ideally worked within a relevant industry i.e.
Medical, Automotive, FMCG, Industrial, Consumer electronics
Excellent verbal and written communication skills
This is a great opportunity to work with a global recognised company who work with some of the world's leading technology based organisations.
A business that offers their employees the freedom to be creative, work across a variety of industries and be able to create career development and personal growth.
To apply for Senior Mechanical Design Engineer based in Warwickshire, please send your cv to ntyler@redlinegroup.Com, or for more information contact Natalie Tyler on 01582 878808 or 07751240250. ....Read more...
Type: Permanent Location: Warwickshire, England
Start: ASAP
Salary / Rate: £40000 - £80000 per annum
Posted: 2025-03-12 09:23:04
-
An exciting opportunity at a leading technology solutions provider has hit the market; the company is hiring for a Graduate Electronics Engineer based in Lincoln.
The company conduct the R&D for a group who design and manufacture Microwave/RF components from concept to finished product.
Main responsibilities of the Graduate Electronics Engineer:
PCB Layout & building
Design and simulation of projects
Prototype building
Testing and qualifying RF designs
Drafting assembly instructions and user manuals
Requirements of the Graduate Electronics Engineer:
Must have achieved a first class honours at university (minimum a bachelors degree in electronics or related field)
Computer literate
Design experience in electronic related field - ideally Electromagnetics or RF/Microwave
Creative thinker
Desire to keep on learning and developing abilities
Hands-on practical skills
Soldering
This is a great opportunity for a Graduate Electronics Engineer that is an expert in their field, agile in their approach, and able to deliver optimal solutions for their customers.
To apply for this Graduate Electronics Engineer role in Lincoln please send your CV to kchandarana@redlingroup.com or please call 01582 878 830 / 07961 158784. ....Read more...
Type: Permanent Location: Lincolnshire, England
Start: ASAP
Salary / Rate: £27500 - £35000 per annum
Posted: 2025-03-11 12:43:01
-
Avionic System Design Engineer required to work as part of a team across aircraft, aviation and satellite connectivity.
Requirements
Avionics systems and SATCOM technology experience of Iridium, Inmarsat, Viasat, Starlink or similar.
DOORS, JAMA or similar systems engineering tool knowledge.
BEng in Electronics Engineering or related ideally with postgrad qualifications.
UAV regulations, safety standards ARP4754, ARP4761, DO178 or DO254 desirable.
Role
Avionic system design, development, and implementation.
SATCOM system integration of Iridium, Inmarsat, Viasat, Starlink.
Design review including testing, validation and regulatory compliance. ....Read more...
Type: Permanent Location: Farnborough, England
Start: ASAP
Duration: Permanent
Salary / Rate: £55000 - £80000 Per Annum None
Posted: 2025-03-11 11:44:02
-
Hybrid Electronics Engineer - PCB Circuits Design - Didcot
A growing complex technology company, based in Didcot, are currently looking for an experienced Electronics Engineer to help with the PCB circuits design of a range of brand-new Medical Devices that will help with life saving and life improving technologies.
The role is possible on a hybrid basis, coming into the office once or twice a week.
The company are hoping to add skillsets to the business they don't currently have.
Due to this, it would be highly advantageous if you have been an Electronics Engineer who has worked on PCB design and circuits design.
The type of Medical Devices you will be working on will change regularly, due to this it would be beneficial if you have worked on a range of projects during your career.
Due to the highly regulated field, you will be working in, past Medical Devices experience would be ideal, but we are open to other complex fiends such as wearable tech, biotech, Labtech, wireless tech, technologies that communicate with smart devices etc.
The invention of and improvement of Medical Devices is the core focus of this company, meaning you will always be working on the cutting edge of the sector learning new things all the time.
As the company grows, I would expect this role to become more senior.
You will be mentoring junior and graduate engineers, so we are looking for someone at senior or principal engineer level.
Apart from having some experience as an Electronics Engineer, it is expected that you would hold a degree within an electronics field, or another role that let you into an electronics engineering role.
This is a great company for advancing your career due to working on complex products continued skills/industry training.
Apart from this you will be rewarded with an excellent starting salary, bonuses, pension, income protection cover, higher than normal holiday allowance and other excellent benefits.
I expect there to be a lot of interest in this role, so if you are interested, I suggest making an application now or risk missing out.
For more information, please feel free to call Andrew Welsh, Director of Medical Devices, Biotech and Drug Discovery recruitment specialists, Newton Colmore, on +44 121 268 2240 or submit an application, and a member of our team at Newton Colmore will be in touch with you. ....Read more...
Type: Permanent Location: Didcot, England
Salary / Rate: bonus, pension, income protection
Posted: 2025-03-11 10:02:06
-
Product Engineer
Our client are seeking a proactive and adaptable Product Engineer to join their dynamic team.
Product Engineers play a ensure that the product development and production processes meet demands while maintaining high quality and cost-efficiency.
The successful candidate will collaborate with various departments including Sales, Engineering, Production, and Quality to drive initiatives that align with business objectives and contribute to continuous improvement.
Responsibilities as Product Engineer
- Working in collaboration with Sales, Purchasing, Engineering, Production, and Quality to meet sales and production
- Provide manufacturing documentation and engineering support to ensure build requirements are met
- Liaise between customer requirements and internal processes
- Convert lists and parts drawings into user-friendly documents
- Produce production documents
- Have a clear understanding of electronic and ideally mechanical assembly
- Drive continuous improvement initiatives and contribute to configuration control of documents and engineering packs
- Plan and implement new processes and procedures to maximise efficiency's
- Carry out customer design changes and support configuration control of documents and engineering packs
Qualifications and Experience Required as Product Engineer
- Proficiency in electronic and mechanical assembly, understanding of technical drawings,
- Demonstrate a sound knowledge of electronic components
- Experience in MRP (Material Requirements Planning) is ideal
- A focus on continuous improvement and efficiency maximisation
- Ability to communicate effectively and collaborate with cross-functional teams
- Proven experience in product engineering and manufacturing documentation
- Familiarity with configuration control and experience with customer design changes
Benefits as Product Engineer
- Up to £50k basic salary DOE
- Pension
- Parking on site
- Health and wellness benefits
- Opportunities for professional development and career growth
- Inclusive and diverse work environment
If you are interested in this position, please apply directly or contact alison.francis@holtengineering.co.uk ....Read more...
Type: Permanent Location: Fareham,England
Start: 10/03/2025
Salary / Rate: £42000 - £50000 per annum, Benefits: Pension, Parking on site
Posted: 2025-03-10 20:50:05
-
Redline Group are working closely with a leading international organisation who are actively looking to expand their Software Development team in the UK.
Our Bedfordshire based client design and manufacture high performance electronics applications, embedded computing devices, products and systems used in a variety of mission critical & safety critical applications globally.
Due to continued growth, they are seeking a Software Development Engineer, based in Bedfordshire, who will be working alongside a multi-disciplined R&D team developing their latest products.
Please get in touch if you have knowledge, skills or experience in any of the following: -
Embedded/Low level software code
HW interface - CAN, I2C, SPI, drivers etc
Languages/Knowledge
C, C++, Python
Real-Time environments
RTOS, Linux, VxWorks,
Experience of the full Software development cycle
Requirements, coding, Test, Integration, verification
Markets/Applications
Automotive, Medical, Avionics
Safety Critical - MISRA C/C++, IEC61508, DO178 etc
Relocation and hybrid working options available.
To apply for Software Development Engineer based in Bedfordshire please send your CV and covering letter to ntyler@redlinegroup.Com, reference MJC1006. ....Read more...
Type: Permanent Location: Bedfordshire, England
Start: ASAP
Salary / Rate: £45000 - £55000 per annum
Posted: 2025-03-10 14:11:05
-
Senior Electronics Engineer - Medical Devices R&D
Newton Colmore is working with a leading medical devices innovator in the UK, and we are searching for an experienced electronics engineer to join their research and development team.
As a senior electronics engineer in this company, you will hold responsibility for the design and development of new ideas, from designing complex analogue, digital, and mixed-signal systems, through to systems integration, testing, and validation.
This company make novel implantable medical devices, and they are looking for an engineer with a strong interest in this area and someone who enjoys solving complex engineering problems on technology that aims to improve lives.
You will be responsible for the entire design process, from initial idea, through several iterations and then ensuring the product is ready for manufacturing, and you will be working with a multidisciplinary team of engineers and scientists.
The company are open to candidates from senior to principal level, and so they are offering tailored salaries, to ensure they find the right person for the role.
This comes with a series of add-ons including income protection and an equity scheme.
The candidate will ideally be based in Oxfordshire, and work in the office as much as possible, but they are also considering people in London on a hybrid basis.
In terms of your skillset, we are ideally looking for someone with strong experience with hardware design, development and testing, mixed with an understanding of signal processing, and embedded systems.
Because of the nature of the product you will be designing, we are looking for someone with an electronics or biomedical engineering background.
If you would like to find out more about this opportunity than go ahead and make an application and a member of our team will be in touch to talk through the role further, confidentially.
Newton Colmore is a specialist search firm, and we connect exceptional engineering and scientific talent with impactful companies.
....Read more...
Type: Permanent Location: Oxford, England
Salary / Rate: Negotiable
Posted: 2025-03-10 13:49:29
-
Quality Engineer - Medical Devices
Newton Colmore is working with a medical devices company in the West Midlands, and we are assisting them with their search for a key Quality Engineer hire.
The role as Quality Engineer will give you the opportunity to work on market leading medical devices whilst working closely with the production team to ensure that the parts delivered from the company's suppliers meet the design specifications and quality requirements The quality engineer will help the production team in supplier quality assessments including creating and following up on SCARs and will also ensure that the Device History Record (DHR) is up to date for products manufactured.
This is a key new role within the team, and you will be reporting directly to the head of the team, and collaborating with the five members of the production team.
This role will also cover key responsibilities such as incoming inspection of parts, customer returns, and ensuring that document control, CAPA, and the complaints process is followed effectively.
To be considered for the Quality Engineer role you will need to have prior medical devices experience, ideally to both 13485 and 14971 ISO standards.
This will be paired with quality control and production knowledge within a manufacturing environment.
In return for your hard work the company offer a highly competitive salary and benefits package as well providing excellent career progression opportunities and hands on training.
Because of how closely you will be working with the production team, this will be a fully onsite role.
In regard to the process, there is a two-stage interview process where you will be invited to showcase your skills and experience, while finding out more about the company, their mission, and what they can offer you.
To enter the recruitment process click apply now and if you have the right skills and expertise, I will be in touch to discuss the opportunity further.
Newton Colmore Consulting is a highly specialist recruitment consultancy operating within the medical devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance and Field Service Engineering sectors throughout Europe and the US.
Keywords: Medical Devices, Quality Engineer, Quality Control, ISO 13485, QMS, Project Engineer, ISO 14971 ....Read more...
Type: Permanent Location: Birmingham, England
Salary / Rate: Negotiable
Posted: 2025-03-10 13:48:38
-
Quality Controller - Medical Technology
Newton Colmore is working with a medical technology company in north Birmingham, and we are assisting them with their search for a key quality control hire.
The role as an experienced quality controller will give you the opportunity to work on market leading medical devices whilst working closely with the production team to ensure that the parts delivered from the company's suppliers meet the design specifications and quality requirements The quality controller will help the production team in supplier quality assessments including creating and following up on SCARs and will also ensure that the Device History Record (DHR) is up to date for products manufactured.
This is a key new role within the team, and you will be reporting directly to the head of the team and collaborating with the five members of the production team.
This role will also cover key responsibilities such as incoming inspection of parts, customer returns, and ensuring that document control, CAPA, and the complaints process is followed effectively.
The company is looking for an experienced quality controller with medical technology knowledge, mixed with strong document control and inspection testing skills.
In return for your hard work the company offer a competitive salary and benefits package as well providing excellent career progression opportunities and hands on training.
In regard to the process, there is a two-stage interview process where you will be invited to showcase your skills and experience, while finding out more about the company, their mission, and what they can offer you.
To enter the recruitment process click apply now and if you have the right skills and expertise, I will be in touch to discuss the opportunity further.
Newton Colmore Consulting is a highly specialist recruitment consultancy operating within the medical devices, Scientific Engineering, Scientific Software, Robotics, Science, Electronics Design, New Product Design, Human Factors, Regulatory Affairs, Quality Assurance and Field Service Engineering sectors throughout Europe and the US.
Keywords: Medical Devices, Quality Engineer, Quality Control, ISO 13485, QMS, Project Engineer, ISO 14971 ....Read more...
Type: Permanent Location: Birmingham, England
Salary / Rate: £32000 - £40000 per annum
Posted: 2025-03-10 13:48:09
-
Technical Laboratory Manager
Birmingham
£57,000 - £65,000 Basic + Bonus + Progression to Technical Director + Company Car + Fuel Card + Company Credit card + Stay away allowance + Flexible working pattern + ‘IMMEDIATE START'
Step foot into a global medical and technical manufacturing company that provides on-site calibration and repair services in the audiometric, acoustic medical sector.
Your role as Technical Laboratory Manager positions you at the forefront of the day to day operations where you will help maintain UKAS accreditation for the company while leading on development projects to improve and expand the measurement capabilities of the UK and Ireland laboratories while assisting with the management of lab and on-site calibration systems and associated software (ADACS, NI etc).
Your role as Technical Laboratory Manager is designed for you to hit the ground running while working towards becoming Technical Director.
Be greatly rewarded and set up for success working towards a role in the maintenance and development of electro-acoustic standards through membership of the UK, EU and other committees.
Your role as Technical Laboratory Manager awaits.
Your Role As A Technical Laboratory Manager Will Include:
* Managing Laboratory research and development plans of electro-acoustic standards through membership of the UK, EU and other committees
* Based in between Birmingham and Hamilton Scotland with regular travel between
* Use calibration system (ADACS) which controls the calibration process and generates calibration certificates, job reportsThe Successful Technical Laboratory Manage will have:
* Experience as Service, Engineering or Technical Manager
* HNC/HND in electronics, science or engineering discipline.
* UK Driving LicensePlease apply or contact James for immediate consideration
Keywords: Research Engineer, Laboratory Manager, Technical Manager, Technical Laboratory Manager, audio, metrology, Instrumentation, service manager, chemist, laboratory assistant, electro scientist, Hamilton Scotland, Birmingham. ....Read more...
Type: Permanent Location: Birmingham, England
Start: ASAP
Salary / Rate: £55000.00 - £65000.00 per annum + Car + Fuel Card + Progression
Posted: 2025-03-10 11:58:21
-
The Redline group have an exciting new opportunity to work with an excellent company, based in North Wales, for an for an experienced Mechanical Design Engineer - Pneumatic/Hydraulic, to focus on mechanical system design and development of new imaging and sighting systems for Aerospace & Defence and Life Science sectors.
Key responsibilities for the Mechanical Design Engineer - Pneumatic/Hydraulic -
- Work on mechanical engineering input from concept through testing and manufacture
- Assist with requirements capture and specification definition, sensitivity analysis, reliability analysis as required
- Produce designs of mechanical assemblies, opto-mechanical sub-assemblies and mechanisms for electro optical systems
- Prepare presentations and reports for both formal and informal design reviews
- Work with Business Development and Engineering teams to support new opportunities and generate solutions for customers
- Drive products from design, to prototyping up to environmental qualification following internal or customer-driven NPI
Key skills/experience required:
- Bachelor's degree level in Mechanical engineering.
- Provable mechanical design experience using Solidworks and PDM.
- Comprehensive knowledge of 3D CAD, component design, assembly creation and production of drawings in accordance with BS.8888.
- Experience of design of precision machines and mechanisms.
- Experience of packaging electronics into systems enclosures.
- Understanding of common engineering materials and finishing techniques.
- Create and maintain technical documentation that supports the product development process including product specifications, data packs, manuals and end user instructions.
- Knowledge of finite element techniques to predict and simulate performance of proposed designs.
- Knowledge or experience of the full design lifecycle, including taking designs from initial negotiations through requirements capture, sub-system design, hardware design and test to final integration.
To apply for this excellent Mechanical Design Engineer - Pneumatic/Hydraulic opportunity, based in North Wales, please email a copy of your CV to Sophie Khuttan - SKhuttan@redlinegroup.Com quoting reference SKK1175, or for more information, please call Sophie on 01582 878817 / 07961158586. ....Read more...
Type: Permanent Location: St Asaph, Wales
Start: ASAP
Salary / Rate: £35000 - £40000 per annum
Posted: 2025-03-10 10:00:22
-
An exciting opportunity has arisen for a Senior Electronics Design Engineer - Digital/Analogue/Firmware based in Devon to join this world leader in Photonic Engineering and Manufacturing Services.
Operating globally this Senior Electronics Design Engineer - Digital/Analogue/Firmware will be based at their UK Centre of Excellence in Devon and join their dynamic, multi-disciplined engineering team working on cutting edge medical and life science devices and instruments.
You will be responsible for the electronics and firmware design of products from concept through to production.
Hybrid working available.
Sponsorship opportunities for the right candidate.
Key skills and experience required for Senior Electronics Design Engineer - Digital/Analogue/Firmware:
Industrial experience in an electronics design & development function
Good analogue/digital/mixed signal circuit design
Experience in Firmware/Software development for ARM based micro's.
Schematic capture and layout (e.G.
Altium)
Experience with prototyping and laboratory test equipment.
Bachelor's degree level in Electrical and/or Electronics engineering
This is a unique opportunity to join a leader in their market who can offer the opportunity for career progression and personal development.
To apply for this Senior Electronics Design Engineer - Digital/Analogue/Firmware opportunity, based in Devon, please send your CV to skhuttan@redlinegroup.Com, or for more information contact Sophie Khuttan on 01582 878817. ....Read more...
Type: Permanent Location: Devon, England
Start: ASAP
Salary / Rate: £50000 - £55000 per annum
Posted: 2025-03-09 00:00:09
-
Mechanical Design Engineer - Solidworks
Are you looking to work for a leading engineering business, based in Gatwick? Are you looking to develop and progress your career in Mechanical Design Engineering?
If so, our client is seeking a skilled Mechanical Design Engineer to join their growing engineering team.
As a Mechanical Design Engineer, you will:
Design metal enclosures using SolidWorks to meet mechanical and functional requirements.
Develop detailed 3D models and drawing packs for manufacturing.
Collaborate with cross-functional teams to integrate mechanical designs with electronic packaging needs.
To apply for this Gatwick based Mechanical Design Engineer job, you will need a combination of the following:
Proven experience in packaging electronics within mechanical designs.
Proficiency in SolidWorks and familiarity with Creo.
Experience in mechanical design, preferably more.
Strong understanding of wired temperature ranges, vibration, and shock constraints would be highly beneficial.
Ability to work independently and within a team environment.
Excellent problem-solving and communication skills.
This is an exciting opportunity for an engineer to progress their career with a Gatwick based, financially strong, progressive mid-sized electronics company.
To apply for the Mechanical Design Engineer role, please send your CV to NDrain@redlinegroup.Com.
If you have any specific questions about this role, please contact Nick on 07487756328/01582878828. ....Read more...
Type: Permanent Location: Gatwick, England
Start: ASAP
Salary / Rate: £30000 - £50000 per annum
Posted: 2025-03-08 00:00:03
