-
FPGA Engineer required to develop state of the art video processing, distribution and interfacing systems.
You will join a team of creative hardware engineers, designing video products and developing new products in high-performance real-time video.
You will design and test digital video processing products using application processors and FPGAs and be responsible for FPGA IP development and integration of video processing, distribution and control logic.
This includes integration of vendor or locally produced IP, logic and algorithm implementation in RTL, constraint management, synthesis, place and route, simulation, test and debug using the latest FPGA development tools.
Key skills
FPGA technology including VHDL.
Embedded design, low level hardware and systems.
CAE tools.
First Degree (or equivalent) qualification in electronics or another relevant subject.
Hardware design engineering commercial experience.
FPGA peripheral interfaces: pcie: DDR3/4: high-speed transceivers.
Video interfaces: HDMI: HDCP: DisplayPort
Role Responsibilities
Work with managers and senior technical staff to develop digital products and their associated designs.
Advising on board level design for FPGA power-supply specification, I/O pin placement signal type, board bring-up and hardware debug.
....Read more...
Type: Permanent Location: Dartford, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £70000 Per Annum None
Posted: 2025-12-04 16:35:40
-
Firmware Developer required to help design FPGA firmware across the full design lifecycle from requirements to delivery.
You will focus on writing firmware to be deployed on FPGAs but an appreciation of electronics will aid your decision making, particularly knowledge of DSP, Radio communication, power, analogue or digital hardware.
Skills
Firmware development experience for FPGA implementation.
RF signal processing knowledge, ADC, DAC and DSP design.
Electronic design particularly RFSoC, MPSoC, Ultrascale or other Xilinx FPGAs with Vivado, Vitis or Petalinux design suites.
Laboratory equipment familiarity such as spectrum analysers, oscilloscopes, RF signal generators, network analysers etc.
2:1 or above Electronic, Communications or similar degree and ideally post grad MSc and PhD.
RTL Digital logic design and HDL programming in VHDL or Verilog.
Other technologies, Linux, Git, TCL, Embedded C programming
Role
FPGA firmware development of signal processing, glue logic, highspeed interface, testbench verification, FPGAs, SoCs and PLD.
....Read more...
Type: Permanent Location: Reading, England
Start: ASAP
Duration: Permanent
Salary / Rate: £50000 - £75000 Per Annum None
Posted: 2025-12-04 16:33:38
-
We are seeking a FPGA firmware engineer, specialising in the design and development of advanced electronics hardware, including power systems, analogue, digital, and RF components.
In this role, you will oversee the complete firmware development cycle, from negotiating requirements and drafting design architecture to validating and verifying the final product.
Main Duties
Design and implement high-quality FPGA firmware, incorporating signal processing and high-speed data interfaces.
Create and execute testbenches to verify FPGA firmware functionality.
Develop firmware for complex FPGAs, SoCs, and PLDs, ensuring optimal performance.
Conduct firmware testing on actual hardware systems.
Technical Expertise
A degree in Electrical Engineering, Communications Engineering
Strong foundation in electronic engineering, including binary number systems and digital logic design (RTL level).
Proficiency in HDL languages (VHDL or Verilog) and a minimum of two years of experience as a firmware developer.
Comprehensive understanding of FPGA architecture and signal processing for RF signals, ADCs, and DACs.
Familiarity with digital electronic and DSP design principles.
Experience with Xilinx FPGAs
Competence in using lab equipment such as oscilloscopes, spectrum analysers, RF signal generators, and network analysers.
Knowledge of Linux, Git, TCL, and C programming. ....Read more...
Type: Permanent Location: Reading, England
Start: ASAP
Duration: Permanent
Salary / Rate: £65000 - £75000 Per Annum None
Posted: 2025-12-04 16:32:36
-
Could you be interested in an exciting new Manufacturing Engineer role based in Norfolk within an industry-leading, well-established business?
Responsibilities for the Manufacturing Engineer job in Norfolk:
Develop and maintain software for robotic systems and automated test equipment
Collaborate with hardware engineers to optimise manufacturing processes
Evaluate new and existing production lines to identify improvements to manufacturing processes, analytical requirements, and equipment; advise appropriate engineering personnel on manufacturability, process robustness, and equipment requirements
Ensure the smooth transition of new products into manufacturing (NPI)
Document software architecture, code, and system configurations
Key skills and experience required for the Manufacturing Engineer job:
Education: Bachelor's degree in Engineering / HND / Electrical or Electronic Engineering, or related industry qualification
Experience in production engineering
Strong knowledge of manufacturing engineering relating to Electronics, Software, and Automation
Familiarity with PLC programming and SCADA systems
This is a fantastic opportunity to join a successful, world-leading technology company with cutting-edge products, offering dynamic, challenging, and exciting career opportunities.
APPLY NOW! If you are interested in this Manufacturing Engineer job in Norfolk or other similar roles, please call Kyle Graveney on 01582 878817 or 07961 158774.
To apply by email: KGraveney@redlinegroup.Com ....Read more...
Type: Permanent Location: Norfolk, England
Start: ASAP
Salary / Rate: £32000 - £53000 per annum
Posted: 2025-12-04 16:07:18
-
Lead Electrical & Electronics Engineer - Contract£40-£45 p/h | Outside IR35 | Initial 3-month contractRingwood
An innovative engineering manufacturer is seeking an experienced Lead Electrical & Electronics Engineer to support their product design team on a contract basis.
You'll take a technical lead role across electrical and electronic design for complex educational and industrial technology products used worldwide.
In this hands-on position, you'll guide a small electronics team while working across the full product lifecycle — from concept and schematics to PCB/PCBA work, component selection, integration of motors, pumps, heaters, and embedded systems, as well as fault-finding down to component level.
Experience with PLCs, HMIs, microcontrollers, and electrical systems up to ~10kW is highly valuable.
What you'll be doing:
Leading electrical & electronic design for new and legacy products
Diagnosing and improving PCBAs at component level
Creating electrical schematics and integrating mechanical/electromechanical systems
Selecting components and suppliers, balancing cost, performance & reliability
Supporting product compliance, documentation, testing and design reviews
Collaborating closely with engineering, projects, and manufacturing teams
What you'll need:
Strong background in electrical/electronic engineering (degree-qualified)
Proficiency with ECAD tools (SolidWorks Electrical, ePlan, PCB design software)
Solid understanding of product safety directives (Machinery, LVD)
Project leadership experience and ability to manage multiple design workflows
A methodical, detail-driven engineering mindset
This is a great opportunity to step into a highly varied, technically rich role within a small, collaborative team working on globally-used products.
Immediate start available — apply now to discuss the contract in detail. ....Read more...
Type: Contract Location: Hampshire, England
Duration: 3 months
Salary / Rate: £40 - £45 per hour
Posted: 2025-12-03 16:21:42
-
Embedded Hardware Engineer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: FPGA/VHDL, Java or C/C++Nice to have's: Python, Siemens PLC, Maven/Ant, SQL Server, Linux, Docker, GIT, Jenkins, Sonatype Nexus
Our Client:Is a pioneering, family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We seek a highly skilled Embedded Hardware Developer with a background in Electronic Engineering and experience in FPGA/VHDL to join our client's team.
As an Embedded Hardware Developer, you will design, develop, and maintain simulated signal-processing systems, combining C++, Java or Python with FPGA/VHDL.
Your Tasks:
Development and simulation of complex signal processing systems
Design and verification of simulated signal processing system with hardware (mainly FPGA/ VHDL)
Design and development of PCB for control systems
Maintenance and further development of the internal firmware environment and hardware
Commissioning and tests of control systems
Required Skills:
Master's or Bachelor's degree in electrical science or similar education
Experience in signal processing, FPGA designs and VHDL programming
Experience in PCB development for control systems
Knowledge of component-oriented design with JAVA OSGI/RCP, with SPS programming (Siemens) and with Python as a plus
Alternatively, strong C++ skills are welcome
Good language skills in English and German (both spoken and written)
Positive work attitude.
Collaborative team player with excellent communication skills to support team members
Ability to work in interdisciplinary teams
Benefits:
CHF 100 -130k + Bonus Benefits
Opportunity to work on exciting projects
Collaborative and dynamic international team environment
Remote work options with flexible working hours
Professional development opportunities and mentorship
Comprehensive benefits package, including health insurance, retirement plan, and more
Access to cutting-edge technologies and tools
Recognition and rewards for outstanding performance
30 Days Annual Leave
Location: Aargau, Baden, Switzerland (Remote)Salary: CHF 100 -130k + Bonus Benefits
Mandatory Skillset: FPGA/VHDL, Java or C/C++Nice to have's: Python, Siemens PLC, Maven/Ant, SQL Server, Linux, Docker, GIT, Jenkins, Sonatype Nexus
Applicants for the Senior Software Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/ARG100130 ....Read more...
Type: Permanent Location: Baden, Switzerland
Start: ASAP
Salary / Rate: Swiss Franc100000 - Swiss Franc130000 per annum
Posted: 2025-12-03 01:13:50
-
Electrical Engineer/Designer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: Zuken E3 or E-PLAN P8
Our Client:Is a pioneering family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We seek an experienced Electrical Design Engineer or Elektroplaner with Zuken E3 or E-Plan expertise to join our team.
The successful candidate will be responsible for developing schematic drawings and Bills of Materials (BOMs) for complete systems.
This role's primary focus will be creating high-quality schematic drawings and BOMs with a good understanding of the Low Voltage Directive.
Requirements:
Higher Technical School Qualification or Apprenticeship in Electrical Engineering
4+ years of experience in electrical design engineering
Strong understanding of electrical design principles, including circuit analysis and design
Proficiency in Zuken E3 or E-PLAN, with expertise in creating schematic drawings and BOMs
Knowledge of the Low Voltage Directive and relevant electrical safety standards
Excellent communication and collaboration skills
Ability to work independently and as part of a team
Strong problem-solving and analytical skills
Familiarity with design automation tools and methodologies
Nice to Have:
Bachelor's or Master's degree in Electrical Engineering or a related field
Experience with PCB design and layout
Knowledge of electrical testing and validation procedures
Familiarity with industry-standard design tools and software
Certification in electrical engineering or a related field
Benefits:
Competitive salary and benefits package - Up to CHF 120k
Opportunity to work on exciting and challenging projects
Collaborative and dynamic work environment
Professional development and training opportunities
Comprehensive benefits package, including health insurance, retirement plan, and more
Flexible working hours and remote work options
30 Days Annual Leave
Location: Aargau, Baden, SwitzerlandSalary: CHF 100 -130k + Bonus Benefits
Tech Stack: Zuken E3, E-PLAN, PCB
Applicants for the Senior Software Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/EDARG100120 ....Read more...
Type: Permanent Location: Baden, Switzerland
Start: ASAP
Salary / Rate: Swiss Franc90000 - Swiss Franc130000 per annum
Posted: 2025-12-03 01:06:33
-
Test Engineer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: PCB, Testing, Electronics
Our Client:Is a pioneering family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We are seeking a skilled Test Engineer to join our client's team, who is responsible for developing test requirements, creating test instructions, and testing PCBs, assemblies, and systems.
The ideal candidate will have a strong background in electronics and measurement technology, with practical experience in handling measuring equipment and a good understanding of radio frequency and power engineering.
Main Responsabilities:
Development of test requirements and new test methods in collaboration with the development department
Creation of test instructions and test reports
Testing, repairing (requires e.g.
soldering skills) and commissioning of PCB's, assemblies and systems as well as participation in tests in the test field
Checking production orders and goods receipt material according to quality characteristics
Perform factory inspections with customers
Management of measuring equipment storage
Construction of test facilities for the rationalization of test procedures
Required Competencies:
Completed technical training in the direction of electronics/measurement technology, technician school, an advantage
Practical experience in handling measuring equipment
Knowledge of radio frequency and power engineering is an advantage
Excellent knowledge of German and English
Positive attitude to work
Reliable team player with a pronounced quality awareness
Enjoy working independently
Benefits:
Competitive salary and benefits package - Up to CHF 110k
Opportunity to work on exciting and challenging projects
Collaborative and dynamic work environment
Professional development and training opportunities
Comprehensive benefits package, including health insurance, retirement plan, and more
Flexible working hours and remote work options
30 Days Annual Leave
Location: Aargau, Baden, SwitzerlandSalary: CHF 80-110k + Bonus Benefits
Tech Stack: PCB, Testing & Electronics
Applicants for the Test Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/TESARG80110 ....Read more...
Type: Permanent Location: Baden, Switzerland
Start: ASAP
Salary / Rate: Swiss Franc80000 - Swiss Franc110000 per annum
Posted: 2025-12-03 01:06:33
-
An opportunity has arisen for a Senior Electronics Engineer to join an innovative and future thinking business based in Berkshire.
The successful Berkshire based Senior Electronics Engineer will work with a market-leading design team focused on developing innovative and robust electronic products.
The role involves leading projects from initial concept through to final production, including schematic design, PCB layout, prototyping, testing, and customer support as products scale to volume production.
Key Responsibilities:
Lead electronic product development projects from concept to production.
Design innovative electronics and embedded firmware solutions.
Conduct automated and manual testing for electronics and software.
Act as the lead architect for assigned projects, collaborating with other engineers where needed.
Manufacture and test embedded components and harnesses for prototypes.
Participate in formal design reviews and follow an agile development methodology.
Ensure accurate documentation and maintain up-to-date project tracking (Jira, Atlassian).
Conduct EMC testing and compliance evaluations for various industry standards.
Skills and Experience:
A relevant degree or HNC/HND in Electronic Engineering, or significant proven experience in electronic product development.
Extensive industry experience in electronics design and embedded systems development.
Expertise in Altium Designer for schematic capture and PCB layout.
Ability to design and integrate digital and industrial communication buses such as SPI, I2C, UART, Ethernet, CANbus/LINbus.
Experience with task tracking tools like Jira and version control applications like Bitbucket.
Familiarity with EMC testing and certification requirements for automotive, aerospace, or medical applications is an advantage.
Experience in miniaturisation and high-density electronic designs.
APPLY NOW for the Senior Electronics Engineer position based in, Berkshire, by sending your CV and cover letter to bwiles@redlinegroup.Com or call Ben on 01582 878826 / 07471 181784. ....Read more...
Type: Permanent Location: Berkshire, England
Start: ASAP
Salary / Rate: £50000 - £75000 per annum
Posted: 2025-12-03 00:00:05
-
My client is a world leader in specialised electronic technologies and are looking for a Production Manager based in Hampshire.
The Production Manager based in Hampshire, will report into the General Manager and will be responsible for driving performance, compliance, and continuous improvement across all production areas.
Other responsibilities for the Production Manager based in Hampshire, include:
Lead, inspire and motivate section leaders and operators to achieve production targets.
Ensure risk assessments are in place and all health & safety requirements are fully adhered to.
Set clear objectives, monitor performance, and conduct regular reviews for all direct reports.
Manage inductions, training plans, and skills/competency matrices.
Work with planning to determine required human and material resources.
Oversee recruitment, onboarding, and offboarding of production staff.
Support Sales with quotation inputs including cycle times, capacity constraints, and lead times.
Provide input to Engineering, Process Engineering and QA for manufacturing instructions, processes, and quality specifications.
Ensure the contract review process is executed accurately and on time.
Provide planning with realistic and efficient production schedules, ensuring strong communication and adherence to the plan within production teams.
Collaborate cross-functionally to ensure product and process readiness before production starts.
The Production Manager based in Hampshire, will ideally have:
People management: leadership, directing and coaching.
Excellent organisational skills: Able to manage multiple priorities, deadlines, and work in progress levels effectively
Proficient with ERP/MRP Systems: Knowledge of BoMs, routings, works orders and material control process
Familiarity with high-reliability electronics.
APPLY NOW! For the Production Manager based in Hampshire, by sending a cover letter and CV to adighton@redlinegroup.Com or by calling Adam on 07961158768 Alternatively, if this job is not suitable but you are looking for a job within Production, please call 01582 878 841 for a confidential discussion. ....Read more...
Type: Permanent Location: Hampshire, England
Start: ASAP
Salary / Rate: £60000 - £75000 per annum
Posted: 2025-12-02 16:50:17
-
Redline have a fantastic opportunity for an experienced Field Application Engineer to join this leading global provider of custom engineered connector and cable solutions.
As part of this fast paced dynamic team you will be responsible for recommending products and configurations for customer projects during the design phase.
You will provide the critical link between the customers, development and sales team at all stages of the process, understanding customer needs through developing strong relationships, identify opportunities for sales and increase revenues.
This position is a Remote UK Field Based role working with customers throughout the UK, therefore the Field Applications Engineer can be based from home anywhere in the UK.
The UK Head Office is based in Buckinghamshire and the successful candidate will be required to visit site once every 6 weeks.
This position will be working with Defence Prime contractors so you must be eligible for Security Clearance.
Key skills / experience required for Field Application Engineer:
Significant technical background within a design or applications engineering or technical sales role
Relevant product knowledge experience i.E.
Connectors, Cables, E-Mech, Electronics etc.
Relevant industry experience within Defence, Aerospace or Mil Aero
Ability to liaise with engineers and customers to design level
Effective communication, presentation, organisational and negotiation skills
Ideally qualified in an Electronics or related engineering discipline
The client offers a fantastic basic salary and bonus scheme along with substantial benefits package, combined with exceptional career opportunities.
To apply for Field Applications Engineer, please send your CV and covering to Ben Wiles at Bwiles@redlinegroup.Com, or for more information contact me on 01582 878816 / 07471 181784.
....Read more...
Type: Permanent Location: England
Start: ASAP
Salary / Rate: £50000 - £60000 per annum
Posted: 2025-12-02 09:45:38
-
Senior System Modelling Engineer - Whiteley, Fareham, Hampshire (Hybrid Working)
Location: Whiteley, Fareham, Hampshire
Working pattern: Hybrid (flexible mix of on-site and remote working)
My client is the European headquarters of a high-growth, high-innovation semiconductor company.
They are seeking a talented, ambitious engineer to join their expanding Research team, working on cutting-edge touch and human-machine interface (HMI) technologies in a modern, fast-paced environment.
________________________________________
About the Role
This is an exciting opportunity for a hands-on engineer who enjoys working at the intersection of system modelling, hardware experimentation, and algorithm development.
You will play a key role in shaping future HMI technologies, taking concepts from simulation through to real-world hardware validation.
The role is based in Whiteley but offers hybrid working, allowing flexibility between on-site and remote work.
You will collaborate closely with system architects, IC design teams, firmware engineers, and system validation teams to ensure a smooth and consistent modelling-to-hardware workflow.
________________________________________
Key Responsibilities
Support the research, development, and definition of mixed-signal front-end components using simulations or prototypes
Perform high-level system modelling, analysis, and simulations
Implement, integrate, and validate algorithms
Support the development of new touch detection schemes aligned with the technology roadmap
Evolve and improve existing algorithms to meet project and business needs
Work with stakeholders to define problem statements and research objectives
________________________________________
Skills & Experience
Essential:
Proven experience in high-level modelling and simulation of complex systems
Strong knowledge of Digital Signal Processing (DSP)
Solid understanding of ASIC design and mixed-signal systems
Proficient with version control systems (e.G., Git, Subversion) and familiar with Agile methodologies
Proactive, curious, collaborative, with a passion for knowledge sharing
Proficient in MATLAB, Simulink, Python (at least two)
Willingness to travel for collaborative research or project work
Qualifications:
MSc or PhD in electronics engineering or signal processing-related subjects
BEng or MEng in Engineering, Electronics, or related subjects (upper second class or equivalent)
5+ years post-graduate engineering experience
Desirable:
Knowledge of SPICE, HDL, Verilog, or FPGA
Experience with physics modelling tools such as Ansys / HFSS
Previous HMI or display industry experience
________________________________________
________________________________________
How to Apply
If you are keen, please send an updated CV to nking@redlinegroup.Com or call 01582 878839 / 07961 158788 for more information. ....Read more...
Type: Permanent Location: Whiteley, England
Start: ASAP
Salary / Rate: £70000 - £87000 per annum
Posted: 2025-12-01 16:19:00
-
Electrical Design Engineer
Location: Staffordshire
Salary: Competitive + Excellent BenefitsEmployment Type: Permanent
Insignis Talent is seeking an adaptable and detail-driven Electrical Design Engineer to join their client, working on exciting and innovative Maritime Defence projects.
This position offers the chance to join a forward-thinking organisation delivering complex, high-impact projects within a secure and innovative environment.
The Role
The successful candidate will play a key role in developing high-quality electrical designs and system documentation, ensuring compliance, safety, and performance across a range of engineering projects.
This opportunity provides variety, collaboration, and meaningful involvement in long-term programmes.
Responsibilities
Designing and developing advanced electrical schematics.
Analysing and optimising electrical systems for efficiency and performance.
Generating and defining detailed electrical system requirements.
Capturing, documenting, and reviewing electrical designs with accuracy.
Selecting appropriate cables, protective devices, and electrical components.
Providing expert technical input into component selection and system design.
Collaborating with multidisciplinary engineering and project teams.
Supporting a broad range of engineering tasks and programme activities.
Participating in internal and external project meetings.
Maintaining organised and thorough documentation in line with internal procedures.
Essential Experience & Skills
Minimum HNC in Electrical/Electronic Engineering.
Strong team player with effective communication skills.
Previous experience specifying electrical components.
Solid understanding of electrical standards and compliance.
Proficiency in MS Office.
Quick learner with a flexible, adaptable approach to electrical design challenges.
Experience with electrical schematic capture and design review.
Desirable
Knowledge of electronics.
Experience designing complete electrical systems.
Familiarity with Zuken E3 or similar design tools.
Why This Role?
Opportunity to contribute to exciting, technically advanced engineering projects.
A dynamic, supportive environment that values innovation and professional growth.
Competitive salary and benefits package.
Collaboration with talented engineers on impactful projects.
Security Requirements
Due to the nature of the work, applicants must meet UK security vetting criteria and must be sole British nationals.
....Read more...
Type: Permanent Location: Rugeley, England
Posted: 2025-12-01 11:58:10
-
Insignis Talent is seeking an adaptable and detail-driven Electrical Design Engineer to join their client, working on exciting and innovative Maritime Defence projects.
This position offers the chance to join a forward-thinking organisation delivering complex, high-impact projects within a secure and innovative environment.
The Role
The successful candidate will play a key role in developing high-quality electrical designs and system documentation, ensuring compliance, safety, and performance across a range of engineering projects.
This opportunity provides variety, collaboration, and meaningful involvement in long-term programmes.
Responsibilities
Designing and developing advanced electrical schematics.
Analysing and optimising electrical systems for efficiency and performance.
Generating and defining detailed electrical system requirements.
Capturing, documenting, and reviewing electrical designs with accuracy.
Selecting appropriate cables, protective devices, and electrical components.
Providing expert technical input into component selection and system design.
Collaborating with multidisciplinary engineering and project teams.
Supporting a broad range of engineering tasks and programme activities.
Participating in internal and external project meetings.
Maintaining organised and thorough documentation in line with internal procedures.
Essential Experience & Skills
Minimum HNC in Electrical/Electronic Engineering.
Strong team player with effective communication skills.
Previous experience specifying electrical components.
Solid understanding of electrical standards and compliance.
Proficiency in MS Office.
Quick learner with a flexible, adaptable approach to electrical design challenges.
Experience with electrical schematic capture and design review.
Desirable
Knowledge of electronics.
Experience designing complete electrical systems.
Familiarity with Zuken E3 or similar design tools.
Why This Role?
Opportunity to contribute to exciting, technically advanced engineering projects.
A dynamic, supportive environment that values innovation and professional growth.
Competitive salary and benefits package.
Collaboration with talented engineers on impactful projects.
Security Requirements
Due to the nature of the work, applicants must meet UK security vetting criteria and must be sole British nationals.
....Read more...
Type: Permanent Location: Rugeley, England
Posted: 2025-12-01 11:51:20
-
Are you a hands-on Embedded Engineer passionate about power systems and embedded technology? A leading UK-based engineering company, operating at the forefront of defence innovation, is seeking a Power Applications Controls Engineer to join its growing multi-disciplinary team.
This is your opportunity to play a pivotal role in developing mission-critical technologies used across naval, aerospace, and defence applications. About the Role As part of a small, dynamic team, you'll focus on the design and development of advanced power electronics systems including motor drives, inverters, converters, and power management technologies.
You'll be heavily involved in the full lifecycle, from control strategy design to prototyping and embedded firmware development using DSPs and microcontrollers. Key Responsibilities
Develop control strategies for power electronic systems.
Implement and test DSP/microcontroller-based embedded code.
Collaborate across teams on system design and integration.
Engage in system analysis, verification, and validation activities.
Interact with customers to clarify technical requirements.
Drive innovation and promote reuse of existing technologies.
Essential Skills & Experience
Bachelor's or Master's degree in Electrical/Electronic Engineering or similar.
Proven embedded software/firmware delivery experience in sectors such as defence, aerospace, nuclear, or automotive.
Proficient in embedded C/C++ programming.
Experience with DSPs and microcontrollers.
Ability to gain UK Security Clearance (SC).
Desirable
Experience in power electronics / systems testing.
Familiarity with requirements management tools (e.g.
DOORS, Polarion).
Agile methodology (e.g.
Jira, sprints/scrums).
What's on Offer
Flexible working arrangements including hybrid and compressed hours.
A collaborative, inclusive culture driven by integrity and innovation.
Financial relocation support considered on a case-by-case basis.
Excellent career development and progression opportunities.
Due to the nature of work, all applicants must be eligible for UK Security Clearance. To Apply Submit your CV via this advert today!
....Read more...
Type: Permanent Location: Rugeley, England
Posted: 2025-12-01 11:32:56
-
Junior Field Service Engineer
Leeds
£34,000 - £38,000 + OTE (£45'000) Technical Training + Private Healthcare + Holidays + Progression + Industry Leading Pension + Car / Van Option + Company Credit Card + ‘Immediate Start
Fantastic opportunity for a Junior Engineer to join industry leader who will take your career to the next level.
This is a fantastic opportunity to join an industry leader committed to developing you into a top-level Field Service Engineer in a highly technical and rewarding sector.
This globally recognised company is continuing to grow and is now looking to expand its skilled engineering team.
You'll benefit from ongoing training—both virtual and on-site—along with strong progression routes, a good package, and the opportunity to work with the most advanced equipment in the industry.
Your Role As A Junior Field Service Engineer Will include:
* Calibration & Servicing Of Equipment
* Electrical and Mechanical Work - Checkweighers, X-ray Machines, Metal Detectors,
* Consistent Virtual & Hands on Training
The Successful Junior Engineer Will have:
* Electrical/Electronic Qualifications
* Happy To Travel To The UK Regularly
* Maintenance / Production / Manufacturing Background - Desirable
If interested in this role please apply or contact Charlie Auburn 0203 813 7949
Keywords: Junior Engineer, Electronics Engineer,Electrical,Field Service Engineer, X RAY Engineer, Metal Detectors, Maintenance Engineer, Mobile Engineer, FMCG, Production Line, Food, Electrical Engineer, PLC's, Leeds, Yorkshire, Bradford ....Read more...
Type: Permanent Location: Huddersfield, England
Start: ASAP
Salary / Rate: £34000.00 - £38000 per annum + OTE ( £45'000 )+Progression+Training
Posted: 2025-12-01 09:10:44
-
An exciting opportunity has arisen for a System Engineer to join a cutting-edge team developing advanced Cyber and Information Assurance (IA) products.
This role offers the chance to work across multiple development projects, applying innovative engineering solutions to complex, real-world problems.
What Youll Do
- Take technical ownership of system engineering activities across one or more IA product developments.
- Collaborate closely with hardware, software, FPGA and mechanical teams to define and deliver coherent technical solutions.
- Engage in requirements engineering, capturing, analysing and refining requirements across all design disciplines.
- Contribute throughout the full product lifecycle, from initial concept and architecture through to development, verification, and customer delivery.
- Support bid proposals and provide technical input to customer discussions to ensure solutions meet end-user needs.
What Were Looking For
- Degree in a relevant engineering discipline and 5+ years industry experience in systems engineering or a related field.
- Strong understanding of the systems engineering lifecycle, including requirements management, architecture, and product validation/verification.
- Broad technical awareness across multiple engineering disciplines, with expertise in at least one area.
- Ability to produce clear, concise technical documentation and communicate effectively with cross-functional teams.
- Experience using DOORS or similar tools for requirements management is an advantage.
- Must hold sole British nationality and be eligible for UK Security Clearance (SC).
Desirable Skills
- Knowledge of system design languages (UML, SysML) and techniques such as use-case analysis or trade studies.
- Experience preparing technical estimates for bids.
- Familiarity with mechanical and environmental qualification processes.
This is a fantastic opportunity for an experienced System Engineer, or an electronics/software engineer looking to broaden their scope, to play a key role in the design of unique, high-assurance products used in critical national security applications.
Youll work with an innovative team tackling challenging technical problems and shaping solutions from concept to delivery.
TT ....Read more...
Type: Permanent Location: Farnborough,England
Start: 01/12/2025
Salary / Rate: Competitive
Posted: 2025-12-01 07:56:04
-
Join a dynamic RF and Hardware team working across the full lifecycle of advanced datalinks and RF systems for defence and aerospace.
This permanent role involves both new product development and sustaining existing products.
Key Responsibilities
Lead RF design, system architecture, simulation, schematic capture, and PCB layout (Altium)
Scope new technologies and manage external design resources
Support manufacturing, test and troubleshoot hardware issues
Conduct design reviews, verify specs, and mentor junior engineers
Collaborate across engineering disciplines and contribute to design documentation
Key Skills
Five years in RF design
Experience with wideband RF amplifiers
Proficiency in PCB design tools and RF simulation software
Solid understanding of EMC, analog and digital electronics, and RF test equipment
Strong team player with a proactive attitude
Experience with Altium, AWR Microwave Office, or Ansys HFSS
Familiarity with military or airborne applications and standards
Knowledge of SMPS, embedded systems, and DFM or DFT
Perks and Benefits
Annual bonus (3???6 percent)
25 days holiday ( buy up to 5 more)
Flexible hybrid work (3 office and 2 WFH)
40 hour week ....Read more...
Type: Permanent Location: Brackley, England
Start: ASAP
Duration: Permanent
Salary / Rate: £65000 - £70000 Per Annum None
Posted: 2025-11-29 16:48:01
-
CAD Manager - PCB
Are you an experienced CAD Manager - PCB with strong skills in electronics and mechanical design looking to work with innovative touch technologies?
This company specialises in developing bespoke hardware and firmware silicon devices.
Their products serve automotive and industrial sectors, providing cutting-edge solutions that ensure high-quality customer integration.
They are seeking a talented CAD Manager to join their engineering team in Fareham, UK, to contribute to the development of their next-generation technology.
Responsibilities of this CAD Manager - PCB job based in Fareham:
Manage, guide, and develop CAD team members to deliver efficient and effective support to the wider Engineering team.
Focus on fast-turn, high-quality capacitive multi-touch and force-sensing designs, including supporting flex and rigid PCBs, mechanical housings, and test fixtures.
Prepare 3D CAD design work in support of internal projects and customer requirements.
Interact professionally and efficiently with customers and suppliers.
Requirements of this CAD Manager - PCB job based in Fareham:
A degree (2:2 or better) in Electronics or Physics, or a closely related field.
Other degree subjects will be considered where strong aptitude in the required disciplines can be demonstrated.
An HND (or equivalent) will be considered with exceptional relevant experience.
Proven experience in team leadership/management, including coordinating a team and conducting reviews.
Hands-on experience with schematic capture, multi-layer PCB layout, and 3D CAD.
Familiarity with PC-based CAD applications, including (for example) Altium, Corel, SolidWorks, ProE, AutoCAD.
To apply for this CAD Manager job based in Fareham, please email NDrain@redlinegroup.Com
Or call Nick on 01582 878828 / 07961158760 ....Read more...
Type: Permanent Location: Fareham, England
Start: ASAP
Salary / Rate: £45000 - £55000 per annum
Posted: 2025-11-29 00:00:04
-
An exciting opportunity for an experienced SMT Technician, Bedford, Bedfordshire is available to lead a high-performing team within a fast-paced electronics manufacturing environment.
The SMT Technician, Bedford, Bedfordshire role is responsible for the manufacturing and assembly of Printed Circuit Boards (PCBs) and assemble product to agreed quality levels to meet customer expectations.
The Key Responsibilities for the SMT Technician, based in Bedford include;
Set-up and run SMT lines to specified efficiency and process quality levels
Ensure product meets IPC 610 to the specified class
The successful candidate for the SMT Technician, Bedford, Bedfordshire will have a proven background in;
Experience of running pick and place machines, X-ray and reflow ovens
Creating DEK, SPI, Jet printer programs
Previous experience in working from circuit and Engineering drawings
APPLY NOW for the SMT Technician, Bedford, Bedfordshire, by sending your CV to TDrew@redlinegroup.Com quoting ref.
THD1345.
Otherwise, we always welcome the opportunity to discuss other roles similar to Production related jobs on 01582 878 848 or 07961158762.
....Read more...
Type: Permanent Location: Bedfordshire, England
Start: ASAP
Posted: 2025-11-29 00:00:03
-
Are you an experienced assembler looking for a new opportunity?
Holt Engineering is currently working with an innovative manufacturing company based in Portsmouth, which is on the lookout for a PCB Assembler.
As a PCB Assembler, you will be supporting the production team with the assembly work flow this could include, masking, PCB assembly, conformal coating, and more.
If youre looking to secure a PCB Assembler position with a steadily growing business, then this job is for you!
To be successful in these PCB Assembler roles you must:
- Have experience working within electronics
- Soldering experience
- Previous experience working with PCBs
- Have good attention to detail and be able to work to tight deadlines
- Be able to work from drawings and part lists
For the successful PCB Assembler you will:
- Get a competitive pay structure
- Free parking
- Friendly work environment.
The role will be day shift work.
Paying between £12.21-£13.00ph depending on experience.
Sound like a good fit? Great, then we would love to hear from you!
Contact Sam at Holt Engineering on 07485 390946 or apply now for this advert.
All calls are recorded for training and quality purposes.
Further details are shown within our Privacy Policy which is displayed on our website
In line with the requirements of the Asylum and Immigration Act 1996, all applicants must be eligible to live and work in the UK As part of the recruitment process, you will be asked to provide documented evidence of eligibility please make sure you have this updated ....Read more...
Type: Permanent Location: Portsmouth,England
Start: 28/11/2025
Duration: 1.0 HOUR
Salary / Rate: £12.21 - £13 per hour
Posted: 2025-11-28 14:03:07
-
Holt Engineering are recruiting for an Experienced Assembler to join our client based in Horsham. Looking for an enthusiastic and driven individual to work within the electronics sector.
The Assembler role is a Night shift working Sunday to Thursday 10pm - 6am totalling 37.5hours a week.
The role is paying £12.21 with 25% shift allowance (£15.26) increasing to £12.65 after 12 weeks on site (£15.81 with shift allowance)
The duties for this Assembler position will include:
- Assembling, testing and calibrating manufactured parts
- Working within the SMT area
- Soldering
- PCB assembly
- Assembly of small electronic components
- Assembly of external units
- Following drawings and using hand and power tools
- Quality checking
- Packing
To be considered for this Assembler role you will need:
- Previous assembly experience, Electronic/ PCB would be advantageous
- Ability to use various tools
- PC literate as you will be using PC programmes to test and calibrate
- Comfortable with manual handling
If you are looking for an opportunity to build your career within the electronics sector this is the role for you!
Apply Now! If you would like to hear further details within the role please call Sam 07485 390946 to discuss further. ....Read more...
Type: Contract Location: Horsham,England
Start: 28/11/2025
Duration: 1.0 HOUR
Salary / Rate: £12.21 per hour
Posted: 2025-11-28 13:47:09
-
Field Sales Engineer
Fully Remote (Midlands Territory)
£35,000 £45,000 DOE + Car Allowance, Laptop, Phone, Bonus
An experienced Field Sales Engineer is required to drive sales growth of custom and standard cable assembly solutions across the Midlands, working fully remotely with regular customer visits.
This role blends technical understanding of cable assemblies and interconnects with relationship-building, helping OEM, industrial and technology customers specify and implement the right solutions for their applications.
Key Responsibilities
- Develop and deliver a territory sales plan to achieve revenue and margin targets.
- Identify, qualify and win new business for cable assemblies, wire harnesses and related interconnect products, while growing existing accounts through regular contact, visits and technical presentations.
- Understand customer design requirements and translate them into feasible cable assembly solutions, advising on connectors, harness layouts, shielding, materials and assembly methods.
- Work closely with design engineers to support prototype builds, design validation and postâsales technical support, including troubleshooting issues on customer sites.
- Monitor market and competitor activity, feeding back customer insights and product improvement ideas, and representing the business at trade shows, conferences and technical events.
What Youll Need
- Background in technical sales, field sales or technical account management, experience working within cable assemblies, wire harnesses, interconnect products or electronics manufacturing
- Strong technical understanding of cable assembly design, materials, connectors and manufacturing processes, with confidence reading drawings, specifications and schematics.
- Excellent communication, presentation and negotiation skills, with a self-motivated, organised approach to managing a remote territory and pipeline.
- Comfortable using CRM systems and Microsoft Office, with a full UK driving licence and willingness to travel across the Midlands as needed.
To find out more please contact Max Sinclair and send your CV to max@holtengineering.co.uk ....Read more...
Type: Permanent Location: Midlands,England
Start: 28/11/2025
Salary / Rate: £35000 - £45000 per annum
Posted: 2025-11-28 13:07:04
-
Redline have been retained by a globally recognised manufacturer of switching devices for power generation.
Based in West Sussex, and as part of a larger international group, they are driving development and continuous improvement for solutions across power electronics, industrial electronics, automotive and telecommunications applications.
Due to continued growth, they are seeking a Field Applications Engineer - Relays / Connectors to join their technical sales and solutions team.
The Field Applications Engineer - Relays / Connectors will use own extensive technical knowledge to identify, develop and implement technical solutions for customers across the full product range.
You will be customer facing and support other customer-facing colleagues to deliver enhanced levels of sales growth whilst helping to define and extend the product range.
Key skills and experience required for Field Applications Engineer - Relays / Connectors, based in West Sussex:
Significant experience in the technical field of relays, connectors and contactors
Previous experience of delivering solutions to customer within a technical capacity
Ability to talk and communicate effectively at a technical level across both internal and external stakeholders
Qualified to a degree level in a related discipline, or equivalent
Must be able to travel extensively internationally, including the US
Must be able to obtain baseline security clearance
This role requires flexibility to be on site 3x days per week, with international travel a few times per month.
The role will suit someone in a technical sales, FAE or design oriented role, looking for a challenge within a commercial environment.
It's a great chance to be part of a larger organisation with the opportunity for career development and personal progression.
To apply for Field Applications Engineer - Relays / Connectors, based in West Sussex, please send your CV to Yuon Skelton at yskelton@redlinegroup.Com, or for more information contact us on 01582 878829. ....Read more...
Type: Permanent Location: West Sussex, England
Start: ASAP
Salary / Rate: £60000 - £70000 per annum
Posted: 2025-11-28 11:08:36
-
Im supporting a leading engineering organisation in Dorset who are looking for a Principal Embedded Electronics Engineer to take a technical lead role within a specialist product development team.
This is an opportunity to work on complex, high-performance electronic systems used in advanced maritime technology from high-bandwidth digital telemetry to low-noise analogue signal acquisition and power amplification.
If you enjoy solving difficult engineering problems, guiding talented engineers, and taking designs all the way from concept through to integration and acceptance, this role should be on your radar.
What youll be doing:
- Leading the design and development of cutting-edge digital and analogue electronics for advanced systems
- Owning requirements capture, schematic design, PCB layout, and circuit simulation
- Developing solutions across high-speed digital, FPGA/SoC, embedded processors, power electronics, and low-noise analogue
- Driving technical reviews and ensuring designs meet EMC, CE/UKCA and relevant engineering standards
- Leading system-level engineering work from prototype through to test, verification, and production readiness
- Working closely with cross-disciplinary teams to solve complex technical issues
- Coaching and mentoring junior engineers to strengthen capability across the department
- Maintaining high standards of technical documentation, design packs, and integration reports
What Im looking for:
- Degree-qualified Electronic Engineer
- Strong background in PCB design, simulation, and electronic development tools
- Expertise in one or more of:
- High-speed digital design (LVDS, Ethernet)
- FPGA/SoC with VHDL
- Embedded processor design (C/C++, RTOS)
- Analogue signal conditioning & data acquisition
- Power amplifier or power supply design
- Solid understanding of EMC, electrical safety, and CE/UKCA requirements
- Experience with system-level integration, debugging, and verification
- Confident communicator who can influence design decisions and lead technical discussions
- Able to work in a dynamic, fast-paced engineering environment
Why this opportunity?
Youll be joining a highly capable engineering team working on technology where reliability, precision, and performance genuinely matter.
Its a role with real technical depth, direct involvement in product innovation, and the chance to shape both engineering solutions and team capability.
How to Apply
Interested? Id love to tell you more about this role call Ian Broadhurst on 07734406996 or drop me a message at ian.broadhurst@holtengineering.co.uk. ....Read more...
Type: Permanent Location: Winfrith Newburgh,England
Start: 28/11/2025
Salary / Rate: £1 - £100000 per annum
Posted: 2025-11-28 10:43:06
