-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Production Operator starts, troubleshoots, and operates manufacturing equipment safely.
There are three Production Operator levels (I, II, & III).
The level will be determined by experience, ability to assume various roles on the plant floor, and demonstrated ability to independently troubleshoot and problem-solve machine issues resulting in efficient cycles and minimal downtime.
The Production Operator will operate production equipment, including industrial blenders, in accordance with the established production schedule.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform work in a safe manner by following all written and verbally communicated safety rules and procedures.
Follow standard work procedures to operate and maintain assigned machine(s).
Routinely meet or exceed production output rates per standards.
Ensure product meets certain tolerances and specifications.
Perform routine inspections per quality standards.
Understand production instructions.
Maintain accurate paperwork.
Inspects equipment, structures, and materials to identify problems or defects prior to production to ensure a clean, clear and safe work environment.
Reads and follows work orders and formulas to meet production specifications and schedules.
Examines materials, ingredients, or product per quality standards.
Weighs or measures materials, ingredients, and products per requirements.
Adds and mixes raw materials according to specifications.
Transfers materials, supplies, and products between work areas.
Discharges blenders of powder when necessary.
Ensures quality and conformity of blended products to meet standards.
Ensures equipment is set-up, cleaned, sanitized, and operating properly before, after and between runs.
Completes cleaning logs and notifies quality control for hygiene testing.
Records operational and production data on specified forms/production documents.
Reports malfunctions to a supervisor and confirms proactive and routine maintenance.
Conducts on-going assessment of quality control and operational procedures.
EDUCATION REQUIREMENT: No formal education required.
EXPERIENCE REQUIREMENT: No prior experience or training.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
ADDITIONAL INFORMATION:
Ability to function effectively in a team setting.
Ability to multi-task while maintaining attention to detail.
Demonstrates reliability, flexibility, and dependability
Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage.
Demonstrates accepted ethical and professional business behavior.
Executes ISO authority and responsibility.
Completes and maintains all required training.
Reports suspected violations including those of a business associate.
Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2026-09-15 15:11:51
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Production Operator starts, troubleshoots, and operates manufacturing equipment safely.
There are three Production Operator levels (I, II, & III).
The level will be determined by experience, ability to assume various roles on the plant floor, and demonstrated ability to independently troubleshoot and problem-solve machine issues resulting in efficient cycles and minimal downtime.
The Production Operator will operate production equipment, including industrial blenders, in accordance with the established production schedule.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform work in a safe manner by following all written and verbally communicated safety rules and procedures.
Follow standard work procedures to operate and maintain assigned machine(s).
Routinely meet or exceed production output rates per standards.
Ensure product meets certain tolerances and specifications.
Perform routine inspections per quality standards.
Understand production instructions.
Maintain accurate paperwork.
Inspects equipment, structures, and materials to identify problems or defects prior to production to ensure a clean, clear and safe work environment.
Reads and follows work orders and formulas to meet production specifications and schedules.
Examines materials, ingredients, or product per quality standards.
Weighs or measures materials, ingredients, and products per requirements.
Adds and mixes raw materials according to specifications.
Transfers materials, supplies, and products between work areas.
Discharges blenders of powder when necessary.
Ensures quality and conformity of blended products to meet standards.
Ensures equipment is set-up, cleaned, sanitized, and operating properly before, after and between runs.
Completes cleaning logs and notifies quality control for hygiene testing.
Records operational and production data on specified forms/production documents.
Reports malfunctions to a supervisor and confirms proactive and routine maintenance.
Conducts on-going assessment of quality control and operational procedures.
EDUCATION REQUIREMENT: No formal education required.
EXPERIENCE REQUIREMENT: No prior experience or training.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
ADDITIONAL INFORMATION:
Ability to function effectively in a team setting.
Ability to multi-task while maintaining attention to detail.
Demonstrates reliability, flexibility, and dependability
Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage.
Demonstrates accepted ethical and professional business behavior.
Executes ISO authority and responsibility.
Completes and maintains all required training.
Reports suspected violations including those of a business associate.
Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2026-09-15 15:11:34
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Machine Operator starts, troubleshoots, and operates manufacturing equipment safely.
There are three Machine Operator levels (I, II, & III).
The level will be determined by experience, ability to assume various roles on the plant floor, and demonstrated ability to independently troubleshoot and problem-solve machine issues resulting in efficient cycles and minimal downtime.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform work in a safe manner by following all written and verbally communicated safety rules and procedures.
Follow standard work procedures to operate and maintain assigned machine(s).
Routinely meet or exceed production output rates per standards.
Ensure product meets certain tolerances and specifications.
Perform routine inspections per quality standards.
Understand production instructions.
Maintain accurate paperwork.
Package, label, and store products.
Cross-train on other production functions as business need dictates.
Clean and maintain assigned area to ensure proper functionality.
Report and assist with resolving safety, quality, and mechanical issues.
Participate in the continuous improvement process.
If appropriate, set up and operate various off-line and secondary equipment.
EDUCATION REQUIREMENT:
No formal educational required.
EXPERIENCE REQUIREMENT:
Machine Operator: 0 years of experience
Machine Operator II: 1+ Years of experience
Machine Operator III: 3+ Years of experience
Previous experience operating a machine in a manufacturing environment requiring speed and dexterity is preferred.
CERTIFICATES, LICENSES, REGISTRATIONS:
Forklift certification preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Ability to function effectively in a team setting.
Ability to multi-task while maintaining attention to detail.
Demonstrates reliability, flexibility, and dependability.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS:
The hourly range for applicants in this position generally ranges between $17.25 and $19.55.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Spearfish, South Dakota
Posted: 2026-09-13 23:11:46
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Machine Operator starts, troubleshoots, and operates manufacturing equipment safely.
There are three Machine Operator levels (I, II, & III).
The level will be determined by experience, ability to assume various roles on the plant floor, and demonstrated ability to independently troubleshoot and problem-solve machine issues resulting in efficient cycles and minimal downtime.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform work in a safe manner by following all written and verbally communicated safety rules and procedures.
Follow standard work procedures to operate and maintain assigned machine(s).
Routinely meet or exceed production output rates per standards.
Ensure product meets certain tolerances and specifications.
Perform routine inspections per quality standards.
Understand production instructions.
Maintain accurate paperwork.
Package, label, and store products.
Cross-train on other production functions as business need dictates.
Clean and maintain assigned area to ensure proper functionality.
Report and assist with resolving safety, quality, and mechanical issues.
Participate in the continuous improvement process.
If appropriate, set up and operate various off-line and secondary equipment.
EDUCATION REQUIREMENT:
No formal educational required.
EXPERIENCE REQUIREMENT:
Machine Operator: 0 years of experience
Machine Operator II: 1+ Years of experience
Machine Operator III: 3+ Years of experience
Previous experience operating a machine in a manufacturing environment requiring speed and dexterity is preferred.
CERTIFICATES, LICENSES, REGISTRATIONS:
Forklift certification preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Ability to function effectively in a team setting.
Ability to multi-task while maintaining attention to detail.
Demonstrates reliability, flexibility, and dependability.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS:
The hourly range for applicants in this position generally ranges between $17.25 and $19.55.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Spearfish, South Dakota
Posted: 2026-09-13 23:11:26
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Machine Operator starts, troubleshoots, and operates manufacturing equipment safely.
There are three Machine Operator levels (I, II, & III).
The level will be determined by experience, ability to assume various roles on the plant floor, and demonstrated ability to independently troubleshoot and problem-solve machine issues resulting in efficient cycles and minimal downtime.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform work in a safe manner by following all written and verbally communicated safety rules and procedures.
Follow standard work procedures to operate and maintain assigned machine(s).
Routinely meet or exceed production output rates per standards.
Ensure product meets certain tolerances and specifications.
Perform routine inspections per quality standards.
Understand production instructions.
Maintain accurate paperwork.
Package, label, and store products.
Cross-train on other production functions as business need dictates.
Clean and maintain assigned area to ensure proper functionality.
Report and assist with resolving safety, quality, and mechanical issues.
Participate in the continuous improvement process.
If appropriate, set up and operate various off-line and secondary equipment.
EDUCATION REQUIREMENT:
No formal educational required.
EXPERIENCE REQUIREMENT:
Machine Operator: 0 years of experience
Machine Operator II: 1+ Years of experience
Machine Operator III: 3+ Years of experience
Previous experience operating a machine in a manufacturing environment requiring speed and dexterity is preferred.
CERTIFICATES, LICENSES, REGISTRATIONS:
Forklift certification preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Ability to function effectively in a team setting.
Ability to multi-task while maintaining attention to detail.
Demonstrates reliability, flexibility, and dependability.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS:
The hourly range for applicants in this position generally ranges between $17.25 and $19.55.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Spearfish, South Dakota
Posted: 2026-09-13 23:11:03
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
The Process Engineer provides engineering support to the assigned program and/or area to ensure the product is processed in accordance with customer and division quality requirements while maintaining production flow.
Charged with developing and maintaining systems to assure that all products manufactured by the plant meet customer specifications and achieve superior and reliability levels.
The resident expert regarding process technology.
Responsible for investigating and implementing new process technology at the plant.
The Process Engineer is responsible for maintaining, upgrading, and optimizing the plant.
This position is responsible for influencing the development of preventative maintenance programs at the facility and will have a significant role in capital improvement plans while assisting in work area design, plant layout, visual control and metric implementation, material flow, process tracking, and communication.
GENERAL PURPOSE OF THE JOB:
The Engineer's role is viewed as an extension of management.
Responsibilities are broad and include safety, product quality, process control, productivity improvement, and development of a LEAN culture.
The Engineer is expected to spend a significant amount of time on the floor.
ESSENTIAL DUTIES & RESPONSIBILITIES:
Safety
Assume a leadership position at the facility in partnership with the shift supervisors.
Activities include resolution and communication regarding safety issues.
Execute on scheduled PHA's and JSA's.
Proactively monitor area and remediate potential safety issues.
Use DAKOTA software as a tool for compliance and environmental, health and safety.
Use the tool to report incidents, near misses, and non-conformances.
LEAN Culture
Develop and execute upon "standard work" activities.
Assume responsibility for assigned activities on the Engineering Tier and other accountability boards.
Conduct "GEMBA Walks" daily.
Use walks as the primary means of education and communication of expectations.
Improve productivity through elimination of non-value-added activities.
Apply Engineering principles and methodologies to Improve productivity and eliminate waste.
Product Quality
Work to maximize equipment efficiency and quality for output.
Member of the facility QIC.
Ensure identification of root cause and subsequent prevention of future customer complaints.
Assist in the training of operators with a focus on quality critical product specifications and process parameters.
Capable of equipment troubleshooting and process design.
EDUCATION:
Bachelor's degree from a 4 or 5-year college or university.
B.S.
in Mechanical, Chemical, Electrical, or Controls Engineering.
EXPERIENCE:
Six months or more of PLC, Mechanical, and/or Electrical troubleshooting experience and/or training.
Bachelor's Degree (B.S.) in Chemical Engineering, Mechanical Engineering, Electrical, or Controls Engineering from an ABET-accredited university.
Packaging experience or automation equipment preferred.
CERTIFICATES, LICENSES, REGISTRATIONS:
Six Sigma Green Belt is a plus.
OTHER SKILLS AND ABILITIES:
Understanding process variance and the resultant effects on Quality.
Knowledge of applied statistics.
Ability to perform problem analysis utilizing problem-solving methodology.
Troubleshooting and mechanical aptitude
BENEFITS:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2026-09-12 15:11:51
-
CNC Programmer
Location: Bournemouth
Salary: £43,000 + bens
Job Type: Permanent
CNC Programmer
We are currently recruiting for an experienced CNC programmer to join a growing machine shop facility in Bournemouth.
This is an excellent opportunity for a skilled CNC machinist with experience in CNC programming, to join a progressive engineering environment.
The successful CNC Programmer will be responsible for programming, setting and operating CNC sliding head machines to manufacture high-quality, close-tolerance components safely and efficiently.
Experience working with Citizen or Tornos sliding head lathes would be highly advantageous, although this is not essential as full training can be provided to the right candidate.
Key Responsibilities for the CNC Programmer opportunity in Bournemouth
Program sliding head CNC lathes using G-code and/or offline CAM software
Set and prove out CNC sliding head machines, including Citizen and Tornos
Modify and optimise existing CNC programs to improve cycle times, tooling efficiency and machining performance
Select, prepare and set cutting tools, guide bushes and workholding
Operate CNC machinery to manufacture components in line with engineering drawings and specifications
Monitor machine performance and make adjustments to offsets where required
Identify and resolve machining issues to maintain production efficiency and component quality
Inspect finished components using micrometers, verniers, gauges and other precision measuring equipment
Ensure all components meet required dimensional tolerances, quality standards and surface finish requirements
Maintain high standards of health and safety throughout the machining process
Report any health, safety, quality or production concerns promptly
Ensure compliance with relevant company procedures, policies and regulations
About You
The ideal candidate will have previous experience as a CNC Programmer, within a precision engineering or manufacturing environment.
You should have:
Proven experience programming, setting and operating CNC machinery
Experience with sliding head CNC lathes is desirable
Knowledge of G-code and/or CAM programming
Experience with Citizen or Tornos machines would be advantageous
Ability to read and interpret engineering drawings
Experience using precision measuring equipment
Strong understanding of machining tolerances, tooling and offsets
A quality-focused and safety-conscious approach
Good problem-solving skills and attention to detail
Why Apply?
This is a great opportunity for an experienced CNC Programmerto join a growing machine shop where you can develop your technical skills and work with modern CNC machining technology.
Citizen or Tornos experience is beneficial but not essential, making this role suitable for experienced CNC machinists who are looking to develop their sliding head machining experience.
Apply Now for the CNC Programmer opportunity in Bournemouth
If you are an experienced CNC Programmer, CNC Setter Operator, CNC Machinist or Sliding Head CNC Programmer looking for your next opportunity, we would be keen to hear from you.
Please send over an updated cv to nking@redlinegroup.Com or call 01582 878839.
....Read more...
Type: Permanent Location: Bournemouth, England
Start: ASAP
Salary / Rate: £35000 - £43000 per annum
Posted: 2026-09-12 00:00:02
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Production Operator starts, troubleshoots, and operates manufacturing equipment safely.
There are three Production Operator levels (I, II, & III).
The level will be determined by experience, ability to assume various roles on the plant floor, and demonstrated ability to independently troubleshoot and problem-solve machine issues resulting in efficient cycles and minimal downtime.
The Production Operator will operate production equipment, including industrial blenders, in accordance with the established production schedule.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform work in a safe manner by following all written and verbally communicated safety rules and procedures.
Follow standard work procedures to operate and maintain assigned machine(s).
Routinely meet or exceed production output rates per standards.
Ensure product meets certain tolerances and specifications.
Perform routine inspections per quality standards.
Understand production instructions.
Maintain accurate paperwork.
Inspects equipment, structures, and materials to identify problems or defects prior to production to ensure a clean, clear and safe work environment.
Reads and follows work orders and formulas to meet production specifications and schedules.
Examines materials, ingredients, or product per quality standards.
Weighs or measures materials, ingredients, and products per requirements.
Adds and mixes raw materials according to specifications.
Transfers materials, supplies, and products between work areas.
Discharges blenders of powder when necessary.
Ensures quality and conformity of blended products to meet standards.
Ensures equipment is set-up, cleaned, sanitized, and operating properly before, after and between runs.
Completes cleaning logs and notifies quality control for hygiene testing.
Records operational and production data on specified forms/production documents.
Reports malfunctions to a supervisor and confirms proactive and routine maintenance.
Conducts on-going assessment of quality control and operational procedures.
EDUCATION REQUIREMENT: No formal education required.
EXPERIENCE REQUIREMENT: No prior experience or training.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
ADDITIONAL INFORMATION:
Ability to function effectively in a team setting.
Ability to multi-task while maintaining attention to detail.
Demonstrates reliability, flexibility, and dependability
Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage.
Demonstrates accepted ethical and professional business behavior.
Executes ISO authority and responsibility.
Completes and maintains all required training.
Reports suspected violations including those of a business associate.
Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly.
BENEFITS:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2026-09-11 23:12:39
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Machine Operator starts, troubleshoots, and operates manufacturing equipment safely.
There are three Machine Operator levels (I, II, & III).
The level will be determined by experience, ability to assume various roles on the plant floor, and demonstrated ability to independently troubleshoot and problem-solve machine issues resulting in efficient cycles and minimal downtime.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform work in a safe manner by following all written and verbally communicated safety rules and procedures.
Follow standard work procedures to operate and maintain assigned machine(s).
Routinely meet or exceed production output rates per standards.
Ensure product meets certain tolerances and specifications.
Perform routine inspections per quality standards.
Understand production instructions.
Maintain accurate paperwork.
Package, label, and store products.
Cross-train on other production functions as business need dictates.
Clean and maintain assigned area to ensure proper functionality.
Report and assist with resolving safety, quality, and mechanical issues.
Participate in the continuous improvement process.
If appropriate, set up and operate various off-line and secondary equipment.
EDUCATION REQUIREMENT:
No formal education required.
EXPERIENCE REQUIREMENT:
Machine Operator: 0 years of experience.
Machine Operator II: 1+ Years of experience.
Machine Operator III: 3+ Years of experience.
Previous experience operating a machine in a manufacturing environment requiring speed and dexterity is preferred.
CERTIFICATES, LICENSES, REGISTRATIONS:
Forklift certification preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Ability to function effectively in a team setting.
Ability to multi-task while maintaining attention to detail.
Demonstrates reliability, flexibility, and dependability.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Ashland, Ohio
Posted: 2026-09-11 23:12:33
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Production Operator starts, troubleshoots, and operates manufacturing equipment safely.
There are three Production Operator levels (I, II, & III).
The level will be determined by experience, ability to assume various roles on the plant floor, and demonstrated ability to independently troubleshoot and problem-solve machine issues resulting in efficient cycles and minimal downtime.
The Production Operator will operate production equipment, including industrial blenders, in accordance with the established production schedule.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform work in a safe manner by following all written and verbally communicated safety rules and procedures.
Follow standard work procedures to operate and maintain assigned machine(s).
Routinely meet or exceed production output rates per standards.
Ensure product meets certain tolerances and specifications.
Perform routine inspections per quality standards.
Understand production instructions.
Maintain accurate paperwork.
Inspects equipment, structures, and materials to identify problems or defects prior to production to ensure a clean, clear and safe work environment.
Reads and follows work orders and formulas to meet production specifications and schedules.
Examines materials, ingredients, or product per quality standards.
Weighs or measures materials, ingredients, and products per requirements.
Adds and mixes raw materials according to specifications.
Transfers materials, supplies, and products between work areas.
Discharges blenders of powder when necessary.
Ensures quality and conformity of blended products to meet standards.
Ensures equipment is set-up, cleaned, sanitized, and operating properly before, after and between runs.
Completes cleaning logs and notifies quality control for hygiene testing.
Records operational and production data on specified forms/production documents.
Reports malfunctions to a supervisor and confirms proactive and routine maintenance.
Conducts on-going assessment of quality control and operational procedures.
EDUCATION REQUIREMENT: No formal education required.
EXPERIENCE REQUIREMENT: No prior experience or training.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
ADDITIONAL INFORMATION:
Ability to function effectively in a team setting.
Ability to multi-task while maintaining attention to detail.
Demonstrates reliability, flexibility, and dependability
Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage.
Demonstrates accepted ethical and professional business behavior.
Executes ISO authority and responsibility.
Completes and maintains all required training.
Reports suspected violations including those of a business associate.
Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly.
BENEFITS:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2026-09-11 23:12:30
-
JOB DESCRIPTION
Solving challenges is the very foundation of who we are.
After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint.
When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution.
Today, that discovery is Rust-Oleum Corporation.
The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today.
When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry.
Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry.
As our Batch Maker is to produce paint and related products by setting up, operating, or tending machines to mix or blend materials, such as chemicals, liquids, color pigments, explosive ingredients, or rust-proofing materials.
Here's what you can expect every day:
Stages and charges necessary raw materials into process flow tanks.
Follows batch work instructions in order to manufacture quality products.
Prepares disperser and letdown tank for production, including any necessary equipment clean up.
Monitors and controls high-speed disperser, mixer, pumps, flow meters and other instruments in order to make sure that a batch is produced according to work instructions.
Adjust a batch, under QC guidance, until it is approved.
Get batch tickets from floor supervisor and discuss with floor supervisor the best order.
Determine raw materials needed.
Housekeeping - Clean up work area to 5S standards, takes out trash, participate in cycle count and inventory program.
May assist in other departments such as filling, and material handling or help make sample batches
Ensure work area is safe, clean and free of recognizable hazards, communicating all spills or other hazards to the shift supervisor
Responsible for Dust collector cleanouts when required.
Required Experience:
High school diploma or equivalent
One year of production experience
Able to read batch tickets and prepare labels for products; basic math
Able to operate high-speed dispersers and other operating equipment
Ability to lift 50-100 pounds, read digital scales and flow meters
Experienced forklift operator
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers (9.5) paid holidays and (2) floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Waupun, Wisconsin
Posted: 2026-09-11 23:12:29
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
The Process Engineer provides engineering support to the assigned program and/or area to ensure the product is processed in accordance with customer and division quality requirements while maintaining production flow.
Charged with developing and maintaining systems to assure that all products manufactured by the plant meet customer specifications and achieve superior and reliability levels.
The resident expert regarding process technology.
Responsible for investigating and implementing new process technology at the plant.
The Process Engineer is responsible for maintaining, upgrading, and optimizing the plant.
This position is responsible for influencing the development of preventative maintenance programs at the facility and will have a significant role in capital improvement plans while assisting in work area design, plant layout, visual control and metric implementation, material flow, process tracking, and communication.
GENERAL PURPOSE OF THE JOB:
The Engineer's role is viewed as an extension of management.
Responsibilities are broad and include safety, product quality, process control, productivity improvement, and development of a LEAN culture.
The Engineer is expected to spend a significant amount of time on the floor.
ESSENTIAL DUTIES & RESPONSIBILITIES:
Safety
Assume a leadership position at the facility in partnership with the shift supervisors.
Activities include resolution and communication regarding safety issues.
Execute on scheduled PHA's and JSA's.
Proactively monitor area and remediate potential safety issues.
Use DAKOTA software as a tool for compliance and environmental, health and safety.
Use the tool to report incidents, near misses, and non-conformances.
LEAN Culture
Develop and execute upon "standard work" activities.
Assume responsibility for assigned activities on the Engineering Tier and other accountability boards.
Conduct "GEMBA Walks" daily.
Use walks as the primary means of education and communication of expectations.
Improve productivity through elimination of non-value-added activities.
Apply Engineering principles and methodologies to Improve productivity and eliminate waste.
Product Quality
Work to maximize equipment efficiency and quality for output.
Member of the facility QIC.
Ensure identification of root cause and subsequent prevention of future customer complaints.
Assist in the training of operators with a focus on quality critical product specifications and process parameters.
Capable of equipment troubleshooting and process design.
EDUCATION:
Bachelor's degree from a 4 or 5-year college or university.
B.S.
in Mechanical, Chemical, Electrical, or Controls Engineering.
EXPERIENCE:
Six months or more of PLC, Mechanical, and/or Electrical troubleshooting experience and/or training.
Bachelor's Degree (B.S.) in Chemical Engineering, Mechanical Engineering, Electrical, or Controls Engineering from an ABET-accredited university.
Packaging experience or automation equipment preferred.
CERTIFICATES, LICENSES, REGISTRATIONS:
Six Sigma Green Belt is a plus.
OTHER SKILLS AND ABILITIES:
Understanding process variance and the resultant effects on Quality.
Knowledge of applied statistics.
Ability to perform problem analysis utilizing problem-solving methodology.
Troubleshooting and mechanical aptitude
BENEFITS:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2026-09-11 23:12:28
-
JOB DESCRIPTION
Solving challenges is the very foundation of who we are.
After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint.
When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution.
Today, that discovery is Rust-Oleum Corporation.
The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today.
When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry.
Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry.
As our Batch Maker is to produce paint and related products by setting up, operating, or tending machines to mix or blend materials, such as chemicals, liquids, color pigments, explosive ingredients, or rust-proofing materials.
Here's what you can expect every day:
Stages and charges necessary raw materials into process flow tanks.
Follows batch work instructions in order to manufacture quality products.
Prepares disperser and letdown tank for production, including any necessary equipment clean up.
Monitors and controls high-speed disperser, mixer, pumps, flow meters and other instruments in order to make sure that a batch is produced according to work instructions.
Adjust a batch, under QC guidance, until it is approved.
Get batch tickets from floor supervisor and discuss with floor supervisor the best order.
Determine raw materials needed.
Housekeeping - Clean up work area to 5S standards, takes out trash, participate in cycle count and inventory program.
May assist in other departments such as filling, and material handling or help make sample batches
Ensure work area is safe, clean and free of recognizable hazards, communicating all spills or other hazards to the shift supervisor
Responsible for Dust collector cleanouts when required.
Required Experience:
High school diploma or equivalent
One year of production experience
Able to read batch tickets and prepare labels for products; basic math
Able to operate high-speed dispersers and other operating equipment
Ability to lift 50-100 pounds, read digital scales and flow meters
Experienced forklift operator
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers (9.5) paid holidays and (2) floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Waupun, Wisconsin
Posted: 2026-09-11 23:12:27
-
JOB DESCRIPTION
Solving challenges is the very foundation of who we are.
After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint.
When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution.
Today, that discovery is Rust-Oleum Corporation.
The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today.
When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry.
Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry.
As our Batch Maker is to produce paint and related products by setting up, operating, or tending machines to mix or blend materials, such as chemicals, liquids, color pigments, explosive ingredients, or rust-proofing materials.
Here's what you can expect every day:
Stages and charges necessary raw materials into process flow tanks.
Follows batch work instructions in order to manufacture quality products.
Prepares disperser and letdown tank for production, including any necessary equipment clean up.
Monitors and controls high-speed disperser, mixer, pumps, flow meters and other instruments in order to make sure that a batch is produced according to work instructions.
Adjust a batch, under QC guidance, until it is approved.
Get batch tickets from floor supervisor and discuss with floor supervisor the best order.
Determine raw materials needed.
Housekeeping - Clean up work area to 5S standards, takes out trash, participate in cycle count and inventory program.
May assist in other departments such as filling, and material handling or help make sample batches
Ensure work area is safe, clean and free of recognizable hazards, communicating all spills or other hazards to the shift supervisor
Responsible for Dust collector cleanouts when required.
Required Experience:
High school diploma or equivalent
One year of production experience
Able to read batch tickets and prepare labels for products; basic math
Able to operate high-speed dispersers and other operating equipment
Ability to lift 50-100 pounds, read digital scales and flow meters
Experienced forklift operator
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers (9.5) paid holidays and (2) floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Waupun, Wisconsin
Posted: 2026-09-11 23:12:06
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Machine Operator starts, troubleshoots, and operates manufacturing equipment safely.
There are three Machine Operator levels (I, II, & III).
The level will be determined by experience, ability to assume various roles on the plant floor, and demonstrated ability to independently troubleshoot and problem-solve machine issues resulting in efficient cycles and minimal downtime.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform work in a safe manner by following all written and verbally communicated safety rules and procedures.
Follow standard work procedures to operate and maintain assigned machine(s).
Routinely meet or exceed production output rates per standards.
Ensure product meets certain tolerances and specifications.
Perform routine inspections per quality standards.
Understand production instructions.
Maintain accurate paperwork.
Package, label, and store products.
Cross-train on other production functions as business need dictates.
Clean and maintain assigned area to ensure proper functionality.
Report and assist with resolving safety, quality, and mechanical issues.
Participate in the continuous improvement process.
If appropriate, set up and operate various off-line and secondary equipment.
EDUCATION REQUIREMENT:
No formal education required.
EXPERIENCE REQUIREMENT:
Machine Operator: 0 years of experience.
Machine Operator II: 1+ Years of experience.
Machine Operator III: 3+ Years of experience.
Previous experience operating a machine in a manufacturing environment requiring speed and dexterity is preferred.
CERTIFICATES, LICENSES, REGISTRATIONS:
Forklift certification preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Ability to function effectively in a team setting.
Ability to multi-task while maintaining attention to detail.
Demonstrates reliability, flexibility, and dependability.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Ashland, Ohio
Posted: 2026-09-11 23:12:02
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Production Operator starts, troubleshoots, and operates manufacturing equipment safely.
There are three Production Operator levels (I, II, & III).
The level will be determined by experience, ability to assume various roles on the plant floor, and demonstrated ability to independently troubleshoot and problem-solve machine issues resulting in efficient cycles and minimal downtime.
The Production Operator will operate production equipment, including industrial blenders, in accordance with the established production schedule.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform work in a safe manner by following all written and verbally communicated safety rules and procedures.
Follow standard work procedures to operate and maintain assigned machine(s).
Routinely meet or exceed production output rates per standards.
Ensure product meets certain tolerances and specifications.
Perform routine inspections per quality standards.
Understand production instructions.
Maintain accurate paperwork.
Inspects equipment, structures, and materials to identify problems or defects prior to production to ensure a clean, clear and safe work environment.
Reads and follows work orders and formulas to meet production specifications and schedules.
Examines materials, ingredients, or product per quality standards.
Weighs or measures materials, ingredients, and products per requirements.
Adds and mixes raw materials according to specifications.
Transfers materials, supplies, and products between work areas.
Discharges blenders of powder when necessary.
Ensures quality and conformity of blended products to meet standards.
Ensures equipment is set-up, cleaned, sanitized, and operating properly before, after and between runs.
Completes cleaning logs and notifies quality control for hygiene testing.
Records operational and production data on specified forms/production documents.
Reports malfunctions to a supervisor and confirms proactive and routine maintenance.
Conducts on-going assessment of quality control and operational procedures.
EDUCATION REQUIREMENT: No formal education required.
EXPERIENCE REQUIREMENT: No prior experience or training.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
ADDITIONAL INFORMATION:
Ability to function effectively in a team setting.
Ability to multi-task while maintaining attention to detail.
Demonstrates reliability, flexibility, and dependability
Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage.
Demonstrates accepted ethical and professional business behavior.
Executes ISO authority and responsibility.
Completes and maintains all required training.
Reports suspected violations including those of a business associate.
Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly.
BENEFITS:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2026-09-11 23:12:00
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Machine Operator starts, troubleshoots, and operates manufacturing equipment safely.
There are three Machine Operator levels (I, II, & III).
The level will be determined by experience, ability to assume various roles on the plant floor, and demonstrated ability to independently troubleshoot and problem-solve machine issues resulting in efficient cycles and minimal downtime.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform work in a safe manner by following all written and verbally communicated safety rules and procedures.
Follow standard work procedures to operate and maintain assigned machine(s).
Routinely meet or exceed production output rates per standards.
Ensure product meets certain tolerances and specifications.
Perform routine inspections per quality standards.
Understand production instructions.
Maintain accurate paperwork.
Package, label, and store products.
Cross-train on other production functions as business need dictates.
Clean and maintain assigned area to ensure proper functionality.
Report and assist with resolving safety, quality, and mechanical issues.
Participate in the continuous improvement process.
If appropriate, set up and operate various off-line and secondary equipment.
EDUCATION REQUIREMENT:
No formal education required.
EXPERIENCE REQUIREMENT:
Machine Operator: 0 years of experience.
Machine Operator II: 1+ Years of experience.
Machine Operator III: 3+ Years of experience.
Previous experience operating a machine in a manufacturing environment requiring speed and dexterity is preferred.
CERTIFICATES, LICENSES, REGISTRATIONS:
Forklift certification preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Ability to function effectively in a team setting.
Ability to multi-task while maintaining attention to detail.
Demonstrates reliability, flexibility, and dependability.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance-Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Ashland, Ohio
Posted: 2026-09-11 23:11:33
-
CNC Machinist required to join a precision manufacturing team
Requirements
CAD and CAM Programming
SolidCAM Mazak Mazatrol and Offline programming.
Knowledge of running machines outside of Mazak cellsM
Manual machining skills.
Responsibilities
Operate tools, machining and production equipment.
Maintain equipment and manufacturing systems tools helping drive continuous improvement.
Work from pre job and Toolbox crew and assembly meetings.
Failure investigation as relevant.
Type: Contract Location: Barrow in Furness, England
Start: ASAP
Duration: Temp to Perm
Salary / Rate: £16 - £26 Per Annum None
Posted: 2026-09-11 16:11:36
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Production Operator starts, troubleshoots, and operates manufacturing equipment safely.
There are three Production Operator levels (I, II, & III).
The level will be determined by experience, ability to assume various roles on the plant floor, and demonstrated ability to independently troubleshoot and problem-solve machine issues resulting in efficient cycles and minimal downtime.
The Production Operator will operate production equipment, including industrial blenders, in accordance with the established production schedule.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform work in a safe manner by following all written and verbally communicated safety rules and procedures.
Follow standard work procedures to operate and maintain assigned machine(s).
Routinely meet or exceed production output rates per standards.
Ensure product meets certain tolerances and specifications.
Perform routine inspections per quality standards.
Understand production instructions.
Maintain accurate paperwork.
Inspects equipment, structures, and materials to identify problems or defects prior to production to ensure a clean, clear and safe work environment.
Reads and follows work orders and formulas to meet production specifications and schedules.
Examines materials, ingredients, or product per quality standards.
Weighs or measures materials, ingredients, and products per requirements.
Adds and mixes raw materials according to specifications.
Transfers materials, supplies, and products between work areas.
Discharges blenders of powder when necessary.
Ensures quality and conformity of blended products to meet standards.
Ensures equipment is set-up, cleaned, sanitized, and operating properly before, after and between runs.
Completes cleaning logs and notifies quality control for hygiene testing.
Records operational and production data on specified forms/production documents.
Reports malfunctions to a supervisor and confirms proactive and routine maintenance.
Conducts on-going assessment of quality control and operational procedures.
EDUCATION REQUIREMENT: No formal education required.
EXPERIENCE REQUIREMENT: No prior experience or training.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
ADDITIONAL INFORMATION:
Ability to function effectively in a team setting.
Ability to multi-task while maintaining attention to detail.
Demonstrates reliability, flexibility, and dependability
Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage.
Demonstrates accepted ethical and professional business behavior.
Executes ISO authority and responsibility.
Completes and maintains all required training.
Reports suspected violations including those of a business associate.
Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2026-09-11 15:14:55
-
JOB DESCRIPTION
Tremco Construction Products Group brings togetherTremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Kettle Operator is responsible for processing Tremco Sealants and/or Roofing products by carefully reading and following the process order card.
The operator is responsible for area readiness to produce which includes safety and collection and preparation of materials like pails, drums, and other chemical raw materials.
One batch is complete the operator will test for quality, adjust as needed to assure specification is met by following written standard operating procedures, and then fill product into specified packaging and palletize pails or drums.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Control or operate chemical processes or systems of machines using control boards, Human Machine Interface (HMI computer touch screen) or semi-automatic equipment.
Draw samples of products, and conduct quality control tests to monitor processing and ensure that standards are met.
Use appropriate scales or measurement devices to add materials to the kettle as specified by batch process orders.
Must be able to read and understand recording instruments, pressure gauges, scales, flow meters, panel lights, and other indicators to verify the conformity of process conditions.
Monitor control settings and make necessary adjustments on equipment.
Accurately record production and downtime via written documentation.
EXPERIENCE:
No prior experience is required.
OTHER SKILLS AND ABILITIES:
Basic Computer Skills required (Windows Familiarity).
Lean and VFM (Visual Factory Management) skills and/or willingness to train.
Ability to manage multiple priorities.
Effective team player, self-motivated, quick learner.
Ability to read, write and comprehend the batch-making processes.
Ability to add, subtract, multiply, and divide into all units of measure, using whole numbers, common fractions, and decimals.
Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
Ability to stack 30-pound boxes in high-frequencies.
Ability to lift up to 60-poundpailsusing mechanical assistance and teamwork.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.
Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2026-09-11 15:14:55
-
JOB DESCRIPTION
Tremco Construction Products Group brings togetherTremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Kettle Operator is responsible for processing Tremco Sealants and/or Roofing products by carefully reading and following the process order card.
The operator is responsible for area readiness to produce which includes safety and collection and preparation of materials like pails, drums, and other chemical raw materials.
One batch is complete the operator will test for quality, adjust as needed to assure specification is met by following written standard operating procedures, and then fill product into specified packaging and palletize pails or drums.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Control or operate chemical processes or systems of machines using control boards, Human Machine Interface (HMI computer touch screen) or semi-automatic equipment.
Draw samples of products, and conduct quality control tests to monitor processing and ensure that standards are met.
Use appropriate scales or measurement devices to add materials to the kettle as specified by batch process orders.
Must be able to read and understand recording instruments, pressure gauges, scales, flow meters, panel lights, and other indicators to verify the conformity of process conditions.
Monitor control settings and make necessary adjustments on equipment.
Accurately record production and downtime via written documentation.
EXPERIENCE:
No prior experience is required.
OTHER SKILLS AND ABILITIES:
Basic Computer Skills required (Windows Familiarity).
Lean and VFM (Visual Factory Management) skills and/or willingness to train.
Ability to manage multiple priorities.
Effective team player, self-motivated, quick learner.
Ability to read, write and comprehend the batch-making processes.
Ability to add, subtract, multiply, and divide into all units of measure, using whole numbers, common fractions, and decimals.
Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
Ability to stack 30-pound boxes in high-frequencies.
Ability to lift up to 60-poundpailsusing mechanical assistance and teamwork.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.
Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2026-09-11 15:14:44
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Production Operator starts, troubleshoots, and operates manufacturing equipment safely.
There are three Production Operator levels (I, II, & III).
The level will be determined by experience, ability to assume various roles on the plant floor, and demonstrated ability to independently troubleshoot and problem-solve machine issues resulting in efficient cycles and minimal downtime.
The Production Operator will operate production equipment, including industrial blenders, in accordance with the established production schedule.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform work in a safe manner by following all written and verbally communicated safety rules and procedures.
Follow standard work procedures to operate and maintain assigned machine(s).
Routinely meet or exceed production output rates per standards.
Ensure product meets certain tolerances and specifications.
Perform routine inspections per quality standards.
Understand production instructions.
Maintain accurate paperwork.
Inspects equipment, structures, and materials to identify problems or defects prior to production to ensure a clean, clear and safe work environment.
Reads and follows work orders and formulas to meet production specifications and schedules.
Examines materials, ingredients, or product per quality standards.
Weighs or measures materials, ingredients, and products per requirements.
Adds and mixes raw materials according to specifications.
Transfers materials, supplies, and products between work areas.
Discharges blenders of powder when necessary.
Ensures quality and conformity of blended products to meet standards.
Ensures equipment is set-up, cleaned, sanitized, and operating properly before, after and between runs.
Completes cleaning logs and notifies quality control for hygiene testing.
Records operational and production data on specified forms/production documents.
Reports malfunctions to a supervisor and confirms proactive and routine maintenance.
Conducts on-going assessment of quality control and operational procedures.
EDUCATION REQUIREMENT: No formal education required.
EXPERIENCE REQUIREMENT: No prior experience or training.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
ADDITIONAL INFORMATION:
Ability to function effectively in a team setting.
Ability to multi-task while maintaining attention to detail.
Demonstrates reliability, flexibility, and dependability
Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage.
Demonstrates accepted ethical and professional business behavior.
Executes ISO authority and responsibility.
Completes and maintains all required training.
Reports suspected violations including those of a business associate.
Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2026-09-11 15:12:22
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Production Operator starts, troubleshoots, and operates manufacturing equipment safely.
There are three Production Operator levels (I, II, & III).
The level will be determined by experience, ability to assume various roles on the plant floor, and demonstrated ability to independently troubleshoot and problem-solve machine issues resulting in efficient cycles and minimal downtime.
The Production Operator will operate production equipment, including industrial blenders, in accordance with the established production schedule.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform work in a safe manner by following all written and verbally communicated safety rules and procedures.
Follow standard work procedures to operate and maintain assigned machine(s).
Routinely meet or exceed production output rates per standards.
Ensure product meets certain tolerances and specifications.
Perform routine inspections per quality standards.
Understand production instructions.
Maintain accurate paperwork.
Inspects equipment, structures, and materials to identify problems or defects prior to production to ensure a clean, clear and safe work environment.
Reads and follows work orders and formulas to meet production specifications and schedules.
Examines materials, ingredients, or product per quality standards.
Weighs or measures materials, ingredients, and products per requirements.
Adds and mixes raw materials according to specifications.
Transfers materials, supplies, and products between work areas.
Discharges blenders of powder when necessary.
Ensures quality and conformity of blended products to meet standards.
Ensures equipment is set-up, cleaned, sanitized, and operating properly before, after and between runs.
Completes cleaning logs and notifies quality control for hygiene testing.
Records operational and production data on specified forms/production documents.
Reports malfunctions to a supervisor and confirms proactive and routine maintenance.
Conducts on-going assessment of quality control and operational procedures.
EDUCATION REQUIREMENT: No formal education required.
EXPERIENCE REQUIREMENT: No prior experience or training.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
ADDITIONAL INFORMATION:
Ability to function effectively in a team setting.
Ability to multi-task while maintaining attention to detail.
Demonstrates reliability, flexibility, and dependability
Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage.
Demonstrates accepted ethical and professional business behavior.
Executes ISO authority and responsibility.
Completes and maintains all required training.
Reports suspected violations including those of a business associate.
Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2026-09-11 15:12:05
-
JOB DESCRIPTION
Tremco Construction Products Group brings togetherTremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Kettle Operator is responsible for processing Tremco Sealants and/or Roofing products by carefully reading and following the process order card.
The operator is responsible for area readiness to produce which includes safety and collection and preparation of materials like pails, drums, and other chemical raw materials.
One batch is complete the operator will test for quality, adjust as needed to assure specification is met by following written standard operating procedures, and then fill product into specified packaging and palletize pails or drums.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Control or operate chemical processes or systems of machines using control boards, Human Machine Interface (HMI computer touch screen) or semi-automatic equipment.
Draw samples of products, and conduct quality control tests to monitor processing and ensure that standards are met.
Use appropriate scales or measurement devices to add materials to the kettle as specified by batch process orders.
Must be able to read and understand recording instruments, pressure gauges, scales, flow meters, panel lights, and other indicators to verify the conformity of process conditions.
Monitor control settings and make necessary adjustments on equipment.
Accurately record production and downtime via written documentation.
EXPERIENCE:
No prior experience is required.
OTHER SKILLS AND ABILITIES:
Basic Computer Skills required (Windows Familiarity).
Lean and VFM (Visual Factory Management) skills and/or willingness to train.
Ability to manage multiple priorities.
Effective team player, self-motivated, quick learner.
Ability to read, write and comprehend the batch-making processes.
Ability to add, subtract, multiply, and divide into all units of measure, using whole numbers, common fractions, and decimals.
Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
Ability to stack 30-pound boxes in high-frequencies.
Ability to lift up to 60-poundpailsusing mechanical assistance and teamwork.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.
Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2026-09-11 15:11:32
-
Warehouse Operator is responsible for executing warehouse operations and driving a heavy goods vehicle in compliance with company policies, procedures, and safety regulations.
Warehouse Operator Duties
Pick, pack, and prepare orders for delivery or shipment.
Ensure accurate and on-time order fulfilment, including proper labelling and documentation.
Operate warehouse equipment, such as forklifts, pallet jacks, or reach trucks, to safely handle and move materials.
Follow equipment operating procedures and conduct routine maintenance checks.
Qualifications
Valid driver's license C1, CPC
Previous experience in warehouse operations and truck driving is preferred.
Knowledge of warehouse processes, inventory management, and logistics.
Familiarity with operating warehouse equipment, such as forklifts ....Read more...
Type: Contract Location: Gloucester, England
Start: ASAP
Duration: Permanent
Salary / Rate: £15 - £18 Per Annum None
Posted: 2026-09-11 10:27:03
