-
JOB DESCRIPTION
Position Summary: This position is responsible for developing, instituting, and overseeing all aspects of Environmental, Health, Safety and Corporate Compliance.
This includes but is not limited to ensuring the company complies with all federal and state health, safety and environmental laws, regulations and reporting standards.
Essential Functions:
Works with all personnel at the facility to make sure all safety and environmental regulations are met and are being followed;
Primarily responsible for both the overview of compliance as well as day-to-day operations with respect to safety and regulatory permits and reports.
Ensure all are met with best practices and are compliant.
This pertains to Federal, State, and Local regulations i.e.
RCRA, EPA reporting requirements both directly to the EPA as well as those governed by Missouri DNR Air Pollution and HAZ WASTE;
Conduct and coordinate on-site daily inspections to audit physical conditions and safe work practices.
Including but not limited to: PPE for specific tasks, Emission Points, Work Permits, General Housekeeping, Spill Kits, Satellite and Pre-Transport Waste Storage Areas, Fire Extinguishers, Shower and Eye Wash, etc.;
Be aware concerning all city, state and federal compliance regulations;
Conduct and improve training programs related to all aspects of safety and compliance in the facility for all personnel.
This includes but not limited to: new employee training and refreshers, forklift safety, OSHA, hazwoper, contractor orientation, FOT/IATA, etc.
All training should be conducted in a timely manner and ensure additional process specific trainings are sufficient to maintain safety for employees.
Maintain and update all plans required at the facility, including but not limited to: General Operating Permit, Hazardous Waste Generator Compliance, Storm water Pollution Prevention Plan, Spill Prevention Control and Countermeasures, Emergency Response Plan, Compressed Gas Plan, Contingency Plans, Hazard Communication Program and Security Plans;
Essential reports such as TRI, Tier II, RMP, Quarterly and Biennial Waste Reporting (and their due dates) is the responsibility of your department.
Assistance will be given from other staff to prepare and maintain this data;
Participate and help conduct Safety Committee meetings;
Works closely with HR manager and Vice President/CFO to become responsible for the hands-on administration of the workers' compensation program.
Maintain the OSHA 300 log and tracking.
Manage medical monitoring program;
Maintain and improve environmental compliance programs related to hazardous wastes, air permitting, water pollution control, and community right-to-know programs;
Select and maintain safety equipment and safety supplies on site.
To include purchasing and keeping track of the supplies and managing the costs of these supplies;
Reduce waste generation and costs of disposal.
Upgrade monitoring, testing and instrumentation of waste and byproducts.
Schedule and maintain all documentation related to all waste pickups, including certifying and recertifying waste profiles;
Improve overall safety, housekeeping and reliability of plant work areas and compliance systems;
Member of the PSM team;
Implement and coordinate the documentation and schedule for preventative maintenance of equipment through the Faciliworks program.
Maintain, create and close work orders.
Keep Asset List up to date within Faciliworks database.
Train all maintenance personnel on these procedures and manage to ensure proper procedures are followed;
Ensure all permits (LOTO, Hot Work, Confined Space Entry), as well as MOC's are done correctly, and properly filed and archived.
Become proficient in generating, reviewing and updating SDS's and Labels for our product line.
This will be a multi-member team as GHS is being implemented in 2015, however, in 2016 and future years' maintenance of this system will become part of your department;
Supervise, coach, motivate and develop staff.
Minimum Requirements:
Bachelor's degree in environmental management, Chemistry, Engineering, or a related discipline, or high school diploma if degree with 5 years or more of direct experience in Process Safety Management, or suitable combination of education and relevant experience as described;
Specialized technical/aptitude experience: minimum of 3 years' experience in a manufacturing environment and demonstrated proficiency with manufacturing processes.
Previous work and/or substantial knowledge of, including commonly used concepts, practices and procedures, within the thermoset polymer industry is a strongly considered asset;
Demonstrated comprehensive knowledge of office and facilities coordination and basic leadership and management knowledge; (if applicable to position)
Demonstrated organization, facilitation, communication and presentation skills; (if applicable to position)
Ability to prioritize workflow and organize diverse material and ability to handle multiple, competing and changing priorities; ability to perform effectively without supervision and within established time limits and ongoing deadlines;
Ability to interact and communicate effectively and professionally verbally and in writing, and to provide exceptional service internally and externally;
Relevant computer skills for this position include knowledge and experience with Microsoft Office applications (Word, Excel, PowerPoint) and web-based applications.
Experience using SAGE Platinum for Windows preferred.
Displays adaptability in learning the use of relevant software and displays comprehension of fundamental computer practices and database management;
Demonstrated ability to serve as a knowledgeable resource to the organization's management team that provides leadership and direction;
Demonstrated leadership and vision managing staff groups and major projects or initiatives;
Outstanding interpersonal relationship building and employee coaching and development skills.
Benefits and Compensation
The pay range for applicants in this position generally ranges between $120,000.00/year and $140,000/year.
The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law.
In addition to career advancement and growth, continuous training, and mentoring opportunities, Arnette Polymers offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans.
Arnette Polymers is a division of The Stonhard Group, an RPM International company (NYSE: RPM) that is headquartered in Maple Shade, NJ and has more than 100 years of experience manufacturing and installing high performance, seamless floors throughout the world.
We manufacture and install long-term floor, wall and lining solutions to markets including, but not limited to: food & beverage, general manufacturing, pharmaceutical, chemical processing, education, healthcare, government, technology and hospitality.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
Pay: $120,000.00 - $140,00.00 per yearApply for this ad Online! ....Read more...
Type: Permanent Location: Richmond, Missouri
Posted: 2026-09-10 15:11:22
-
Core-Asset Consulting is working with a leading investment management business to recruit a Senior Fund Administrator on a 12-month fixed-term contract based in Edinburgh. This role supports key Fund Administration activities, with a particular focus on NAV Oversight and Investment Operations across the investment lifecycle.
The role will involve: , Performing and overseeing allocated activities across Investment Operations and NAV Oversight, ensuring tasks are completed accurately, on time and in line with documented procedures and control requirements. , Supporting oversight of investment operations processes across the trade and post-trade lifecycle, including monitoring operational events, exception management and follow-up of open items. , Investigating and helping to resolve trade issues, cash and position discrepancies, NAV breaks, pricing or valuation exceptions and stakeholder queries. , Acting as a senior point of contact for day-to-day queries, process interpretation and more complex operational items. , Working with internal teams and third-party providers to support timely completion of deliverables and resolution of operational issues. , Executing controls and maintaining supporting evidence to the required standard. , Contributing to operational resilience through accurate procedures, effective handovers and cross-training. , Identifying practical process improvements that enhance efficiency, accuracy, scalability and control effectiveness.
Required Experience
Solid experience in Investment Operations across the trade and post-trade lifecycle
, Experience and working knowledge of Aladdin. , Knowledge of fund operations and/or fund administration, with relevant exposure to NAV Oversight, valuation support, Investment Operations or related activities within an asset management environment. , Good understanding of EMEA fund ranges, structures and associated operational requirements. , Comfortable working with Aladdin.
Core-Asset Consulting is an equal opportunities recruiter and we welcome applications from everyone irrespective of age, disability, gender, gender identity or expression, race, colour, ethnic or national origin, sexual orientation, religion or belief, marital/civil partner status or pregnancy.
To apply for this vacancy applicants must be eligible to work in the UK in accordance with the Immigration, Asylum and Nationality Act 2006.
At Core-Asset, we're committed to protecting and respecting your privacy.
Our privacy statement explains when and why we collect personal information about people who engage with our services, how we use it, the conditions under which we may disclose it to others, and how we keep it secure.
We may change this policy from time to time, so please check this policy occasionally to ensure that you're happy with any changes.
By engaging with us (either by applying for a job we're advertising, registering through our website, or getting in touch with our business) you're agreeing to be bound by this policy.
Core-Asset Consulting is committed to protecting the privacy of our candidates, clients and website users.
For further information, please refer to our full Privacy Statement available on our website http://www.core-asset.co.uk/about-core-asset/privacy-statement
Core-Asset Consulting offers specialist recruitment services to asset management, accounting & finance, asset servicing, legal and the wider financial services sector in Scotland. ....Read more...
Type: Contract Location: Edinburgh, Scotland
Start: ASAP
Duration: 12 months
Posted: 2026-09-10 11:28:06
-
JOB DESCRIPTION
BUILD YOUR FUTURE WHILE YOU HELP BUILD A BETTER WORLD!
Tremco Construction Products Group brings together Roofing & Building Maintenance, Commercial Sealants, Waterproofing divisions, Tremco Barrier Solutions Inc., Dryvit, Nudura and Willseal brands, Prebuck LLC, Weatherproofing Technologies, Inc., Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
If you're looking for a place to build a career and a life, with great benefits, advancement opportunity, technology, people and a commitment to a sustainable future, you've found it with us.
PROJECT ADMINISTRATOR
This is a 100% remote position that will support the Pacific Northwest and Pacific Southwest Regions of our Western Division.
Preferred candidate will reside in the Mountain or Pacific time zone.
GENERAL PURPOSE OF THE JOB:
Project Administrators play a crucial role in ensuring the smooth execution and success of projects by providing essential administrative support in collaboration with Construction Managers and Field Representatives throughout various project phases.
Specifically, the Business Operations Project Administrator is tasked with managing and coordinating all administrative aspects for an array of project types.
This includes services like Patch and Repair, Patch and Repair Plus, General Contracting, Safety Patch and Repair, Building Envelope services, IAQ Services (both standalone and integrated with General Contracting), Job Site Inspections, Roofing Advisor Days, Consulting, Diagnostics, TRACE, ACT, and several emergency repair services.
Key responsibilities encompass managing contractor payables, handling customer billings and receivables, ensuring compliance with standards and policies, applying book pricing and WTI documentation policies, overseeing commission and discounting policies, processing change orders, document management, financial data entry, and coordinating communications with Field Resources and Customers as required.
Success in this role requires a high level of professionalism, strong organizational and prioritization skills, effective time management, and proficiency in relevant technology and software.
Excellent interpersonal, written, and oral communication skills, coupled with meticulous attention to detail, accuracy, and a self-motivated attitude, are vital.
The administrator must work effectively both independently and as part of a team, demonstrating the ability to collaborate with customers, field staff, and various internal stakeholders.
This position involves regular interaction with multiple departments and teams, including General Services, General Contracting field operations, Field Representatives, Business Operations, IT, Finance/Accounting, Warranty, Tremcare, Sales, Accounts Payable, Credit, and Products.
Given the dynamic and fast-paced nature of the role, flexibility and adaptability are essential, as the Project Administrator must navigate and respond to evolving project requirements and organizational needs.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
The Project Administrator plays an integral role in the project lifecycle by validating, organizing, and ensuring compliance for all project documentation and financial processes.
Upon receiving SAP Sales Order information from Customer Service Representatives, the administrator confirms all compliance requirements based on the WTI Price Book Policy/Procedures and Contract Management Policy, completing checklists to ensure data accuracy and completeness.
Key responsibilities include managing critical project documents, such as vendor applications, subcontracts, purchase orders, Master Service Agreements, specifications, certificates of insurance, payment and performance bonds, prevailing wage rates, certified payroll reports, and state-specific compliance documentation.
Project Administrators also facilitate and manage compliance submissions as needed.
This role includes dispatching service orders to WTI Technicians, tailored to the specific project type.
For General Contracting projects, the administrator provides WTI Superintendents with essential service orders and field report links to streamline daily reporting.
Additionally, they maintain a comprehensive tracking spreadsheet for all projects, providing up-to-date project insights.
Throughout each project, the Project Administrator coordinates with Construction Managers, Field Representatives, field technicians, customers, and management to ensure seamless operations.
Project management duties cover tracking time and expenses, managing payables over 30 days, monitoring plan versus actual costs, verifying that all documents (such as bonds, insurance, and submittals) are submitted and approved, ensuring costs align with budget expectations, and validating all projects older than 90 days.
This role includes preparing customer invoices with accuracy and timeliness, adhering to book pricing, time and materials (T&M), not-to-exceed (NTE) limits, lump-sum pricing, and customer-specific billing requirements.
Project Administrators must understand and apply WTI's commission and discount policies when processing invoices across both General Contracting and General Services.
They also review projects for job closeout audits, updating planned versus actual costs, and completing a job closing checklist for final approval.
The Project Administrator is essential to ensuring that WTI's policies and procedures are followed precisely, maintaining accurate financial data for reporting at month-end, quarter-end, and fiscal year-end.
This role requires a comprehensive understanding of WTI's operational, financial, and compliance frameworks to support accurate project execution and reporting.
OTHER REQUIRED DUTIES:
Project Management within the following technology platforms, Salesforce, e-Builder, RoofSnap, OLI, Smartsheet, WTI Quick Price App, Concur
Hours to Day Conversions
Calculating Market Price
Weekly backlog meetings
Review and resolve customer disputes
Manage tech service expenses
Assist with travel and hotel arrangements for maintenance and repair routes
Coordinate larger supply and equipment purchases, arrange pickup, payments and cost allocation
Coordinate material orders
Review and process Readsoft workflow items
Monitor daily, weekly and monthly reports
Customer/Vendor Billing Portals
Bi-weekly Project Review Meetings
Payment Reconciliation
Report low margin jobs
Facilitate effective communication
Process Implementation Reviews
Assist in the preparation of project presentations, reports, and other project-related materials
Problem Solving
Conflict Management
Escalation of concerns and issues
Archive Project files as necessary
Participate in special projects when necessary
EDUCATION:
Business Management/Administration or equivalent combination of education and experience.
EXPERIENCE:
4-7 years related experience and/or training
Project Administration/Management, Construction Accounting, Sarbanes-Oxley, public procurement or job order contract, prevailing wage
OTHER SKILLS AND ABILITIES:
Ability to handle multiple tasks, prioritize effectively, and manage time efficiently.
Keeping records, documents, and project files organized and easily accessible.
Excellent written and verbal communication skills to interact with team members, stakeholders, and clients.
Proficiency in project management software, as well as standard office applications like Microsoft Office (Word, Excel, PowerPoint).
Capacity to identify potential issues early on and proactively seek solutions or escalate problems as needed.
Ability to think critically and adapt to changing project conditions.
Understanding of project budgets, cost tracking, and financial reporting.
Ability to assist with financial documentation, such as purchase orders, invoices, and expense reports.
Strong time management skills to handle project deadlines and ensure timely task completion.
Ability to manage time effectively in a fast-paced environment.
Ability to work well with a diverse group of people, from team members to external vendors.
Skill in fostering a collaborative, respectful work environment.
Strong focus on meeting the needs of clients and stakeholders, understanding project requirements, and keeping them updated on project progress.
Ability to resolve conflicts and keep the team working toward common goals.
Handling disputes diplomatically and maintaining positive relationships among project team members.
Knowledge of State prevailing wage, DB and SCAThe salary range for applicants in this position generally ranges between $57,000 and $66,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Benefits:
Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Commission, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2026-09-09 23:13:10
-
Our client, a growing and technically specialised engineering business, are looking for an RF Product Specialist in Nottinghamshire to join their team on a permanent basis.
This is a technically focused role supporting the development, specification and management of a niche RF interconnect product portfolio.
The position offers flexibility in seniority and the opportunity to work closely with engineering and technical teams within a growing and highly specialised area of the business.
Key responsibilities of the RF Product Specialist job based in Nottinghamshire:
Provide technical support and product expertise across a range of RF and interconnect products.
Develop a strong understanding of RF product specifications, applications and technical requirements.
Work closely with engineering, production and other technical teams to support product development and improvement.
Assist with the technical evaluation, specification and selection of RF and interconnect components.
Support customers and internal teams with technical queries relating to RF products and applications.
Review product data, specifications and technical documentation to ensure accuracy and suitability.
Contribute to the development and introduction of new RF products and technologies.
Support technical problem-solving and provide product knowledge across the wider business.
Experience required for the RF Product Specialist job based in Nottinghamshire:
Experience working with RF, microwave, interconnect or related electronic technologies.
Strong technical understanding of RF products, components and applications.
Knowledge of RF connectors, coaxial products, cable assemblies or associated interconnect technologies would be highly desirable.
Experience within industries such as RF interconnect, aerospace, defence, satellite or telecommunications would be beneficial.
Ability to interpret technical specifications, datasheets and engineering requirements.
Strong analytical and problem-solving skills with a technically inquisitive approach.
Ability to work effectively with engineering, production and other technical teams.
Strong communication skills and the ability to explain technical information clearly.
This is an excellent opportunity to join a business with strong growth plans and an increasing focus on RF technology, where you can develop your technical expertise and build a career within a highly specialised RF and interconnect market.
The role can be tailored from junior to experienced level depending on the candidate.
If this RF Product Specialist job based in Nottinghamshire could be of interest, please send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878816. ....Read more...
Type: Permanent Location: Nottinghamshire, England
Start: ASAP
Salary / Rate: £40000 - £65000 per annum
Posted: 2026-09-09 17:01:15
-
Our client, a well-established technology business specialising in electronic and embedded systems, are looking for a Systems Engineer to join their team on a permanent basis.
This is a multidisciplinary engineering role focused on the development of application-specific embedded products, working across firmware, electronics and mechanical hardware to ensure systems meet customer requirements and deliver reliable, efficient and secure solutions.
Key responsibilities of the Systems Engineer job based in Lymington:
Support the definition of overall embedded system architecture, considering performance, scalability and power efficiency.
Interpret user and customer needs and translate them into clear technical system requirements.
Define and negotiate requirements for firmware, electronic and mechanical hardware development.
Work closely with Product Management, Sales and other stakeholders to establish and communicate technical requirements.
Collaborate with software, electronics and mechanical engineering teams throughout the development lifecycle.
Support the integration of hardware and software components to ensure complete system functionality.
Develop and execute system-level test and validation plans.
Troubleshoot and debug embedded systems to identify and resolve technical issues.
Ensure systems meet defined performance, reliability and security requirements.
Produce and maintain comprehensive technical documentation covering system design, functionality and requirements.
Experience required for the Systems Engineer job based in Lymington:
Bachelor's degree in Computer Engineering, Electrical Engineering, Computer Science or a related engineering discipline.
Experience working with embedded systems and application-specific electronic products.
Proficiency in C and C++ programming languages.
Knowledge of modern operating system concepts, IP protocols and hardware interfaces.
Understanding of electronics and PCB design, with experience using relevant design or EDA tools.
Experience with embedded systems debugging tools and techniques.
Strong understanding of system-level development, integration, testing and validation.
Excellent problem-solving and critical-thinking skills.
Strong communication skills with the ability to work effectively across multidisciplinary engineering teams.
Ability to translate customer and user requirements into practical technical solutions.
If this Systems Engineer job based in Lymington could be of interest, please send your CV to bwiles@redlingroup.Com or call Ben on 01582 878816 ....Read more...
Type: Permanent Location: Lymington, England
Start: ASAP
Salary / Rate: £50000 - £60000 per annum
Posted: 2026-09-09 16:59:24
-
Role: Production Operatives X4
Location: Edenbridge
Shifts: Monday to Friday 6:30am-2:30pm or 7am-3pm or Monday to Thursday 2:30pm-11:30pm
Starting Salary: £24,784.50
Contract Type: Full-time, permanent
Full Training Provided
Don't have experience? No problem.
They offer comprehensive training to help you gain the skills you need to succeed.
A fantastic opportunity has arisen within our production team for Production Operatives to join a company that takes real pride in its people and products.
Are you looking to grow your career in manufacturing with a company that truly values its people? We have a fantastic opportunity for a Production Operative to join a thriving and supportive production team!
What You'll Be Doing
You'll play a hands-on role in assembling and wiring components in a quality-assured production environment.
From using microscopes for precision work to reading electrical schematics and contributing to continuous improvement, every day is different and rewarding!
Ideal Candidate Profile (Full and comprehensive training for this role will be provided)
- Possess a versatile skill base with the capability to apply these skills across a range of tasks.
- Have basic knowledge of equipment, tools, and measuring instruments associated with the
manufacturing of electrical wiring and cable assembly.
- Ability to work on intricate and small assemblies.
- Ability to read and interpret electrical drawings, schematics, and instructions.
- Some experience in wiring or assembly (preferred but not essential)
- Good eye for detail and dexterity for small, intricate work
- Comfortable working with tools, schematics, and technical instructions
- IPC 620 trained? That's a bonus - but they will train you if not!
If you're enthusiastic, detail-oriented, and looking to join a company that values high standards and invests in its people, we want to hear from you.
At KHR, we take care to ensure that you are represented as well as possible, so it is worth checking your CV for layout, spelling and grammar as well as making sure it is up to date before you submit.
If you feel you need to highlight particular qualifications, skills or relevant experience with regard to a specific role, then please add a cover letter or a preface page.
This does not need to be formatted in the same manner.
In addition, if your CV is heavy with graphics, etc, please could you also submit a "clean" copy in Word.
Thank you.
Knowledge House Resourcing Ltd is acting as an Employment Agency in relation to this vacancy.
KHR - Recruitment Specialists is a trading name of Knowledge House Resourcing Ltd.
Keep in touch with us online for job alerts, industry updates and market...
....Read more...
Type: Permanent Location: Edenbridge, England
Start: 28/09/2026
Duration: Permanent
Salary / Rate: Up to £24784.5 per annum + + Benefits
Posted: 2026-09-09 15:39:15
-
JOB DESCRIPTION
The Business Analyst partners with business stakeholders and technology teams to analyze business processes, identify opportunities for improvement, and translate business needs into technology-enabled solutions.
This role gathers requirements, designs future-state processes, and supports business transformation initiatives.
Essential Functions
Analyze business processes, systems, and workflows to identify improvement opportunities.
Gather, document, and validate business and functional requirements.
Facilitate workshops and interviews with stakeholders.
Develop process maps, user stories, functional specifications, and business cases.
Partner with IT, project managers, developers, and business leaders to deliver solutions.
Support solution design, testing, user acceptance testing (UAT), and implementation.
Analyze business data and KPIs to support decision-making.
Prepare executive presentations and project documentation.
Identify project risks, assumptions, and dependencies.
Drive continuous process improvement and change management.
Core Competencies
Business Process Analysis
Requirements Elicitation
Stakeholder Management
Project Coordination
Critical Thinking
Communication
Change Management
Process Improvement
Typical Deliverables
Business Requirements Documents (BRDs)
Functional Requirements Specifications
User Stories and Acceptance Criteria
Current-State and Future-State Process Maps
Business Cases
Gap Analyses
UAT Plans and Test Scripts
Executive Presentations
Minimum Requirements
Bachelor's degree in Business, Finance, Information Systems, Computer Science, or related field.
3-7+ years of experience in business analysis, consulting, process improvement, or related field.
Strong analytical, communication, and problem-solving skills.
Experience with requirements gathering and documentation.
Experience working in Agile project environments preferred.
Proficiency in Microsoft Excel, PowerPoint, Word, and Visio or similar tools.
Preferred Requirements
Business process modeling
Data analysis and reporting
ERP and CRM systems experience
Jira, Confluence, or similar collaboration tools
Digital transformation experience
CBAP, PMI-PBA, or Agile certifications (preferred)
Benefits and Compensation
The pay range for applicants in this position generally ranges between $85,000 and $110,000.
The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law.
In addition to career advancement and growth, continuous training, and mentoring opportunities, Stonhard offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cherry Hill, New Jersey
Posted: 2026-09-09 15:13:52
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
Ensures goods shipped and received are accurate, orders are packed and processed correctly and in a timely, cost-effective manner.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform standard work in a safe manner by following all written and verbally communicated safety rules and procedures.
Operate forklift and/or pallet jack to move raw materials and finished goods.
Ensure items are properly packed, labeled, and staged for shipment.
Document and maintain accurate shipping records.
Safely and accurately load all outbound freight.
Manually load and unload trailers, and complete supporting documents (i.e., bill of lading (BOL))
Identify, record, and provide recommendations for any issues or non-conformities relating to the product, process, and quality system.
Participate in inventory procedures and cycle counts.
Cross-train on other production functions to aid as business need dictates.
Clean and maintain assigned area.
EDUCATION REQUIREMENT: No formal education required.
EXPERIENCE REQUIREMENT: No prior experience or training.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
ADDITIONAL INFORMATION:
Prior experience driving forklift and maintaining documentation preferred
Familiarity with shipping software preferred
BENEFITS:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2026-09-09 15:13:52
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Republic Powdered Metals, Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and Pure Air Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 3,000 people across North America.
A Filler is primarily responsible for accurately filling finished products into the proper packaging.
Packaging could be 1-gallon cans, 5-gallon pails, 55-gallon drums and large totes.
This position often involves working with industrial and consumer products.
Desired job skills include mechanical knowledge, math, strong attention to detail, and the ability to work within a team.
Your duties include, but are not limited to:
Operating and tending to machines.
Preparing products for delivery and storage and handling.
Moving materials to produce a smooth workflow.
Inspecting equipment to ensure safe operation.
Communicate with Buyer/Planner and Group Lead when inventory is low.
Read Process Orders and verify correct amount of labels and correct pails.
Work with Group Lead for Daily Production Schedule.
Run automated label machine.
Operate a forklift.
Keeping inventory of Labels, Black Ribbons, Red Ribbons, Black and White pails.
Print labels (SAP).
Daily Labeler Machine housekeeping.
Maintain 1 Day lead-time on labeled pails for production.
Run automated label machine.
Other duties as assigned.All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Medina, Ohio
Posted: 2026-09-09 15:13:46
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
Ensures goods shipped and received are accurate, orders are packed and processed correctly and in a timely, cost-effective manner.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform standard work in a safe manner by following all written and verbally communicated safety rules and procedures.
Operate forklift and/or pallet jack to move raw materials and finished goods.
Ensure items are properly packed, labeled, and staged for shipment.
Document and maintain accurate shipping records.
Safely and accurately load all outbound freight.
Manually load and unload trailers, and complete supporting documents (i.e., bill of lading (BOL))
Identify, record, and provide recommendations for any issues or non-conformities relating to the product, process, and quality system.
Participate in inventory procedures and cycle counts.
Cross-train on other production functions to aid as business need dictates.
Clean and maintain assigned area.
EDUCATION REQUIREMENT: No formal education required.
EXPERIENCE REQUIREMENT: No prior experience or training.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
ADDITIONAL INFORMATION:
Prior experience driving forklift and maintaining documentation preferred
Familiarity with shipping software preferred
BENEFITS:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2026-09-09 15:13:45
-
JOB DESCRIPTION
We are seeking experienced Commercial Roofers to join our team.
The Commercial Roofer will be responsible for the maintenance, repairs, and installation of commercial roofing systems.
$20-33/hour
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match
Company Pension Plan
Health Insurance
Paid time-off
Mileage reimbursement
Continuing education
Position Duties & Responsibilities:
Installation of different types of roofing systems such as BUR, EPDM, Single-ply, coatings, and other forms of low-slope roofing systems
Safe operation of tools of the trade (hand tools, power tools etc.)
Follow OSHA regulations and other regulatory agencies relating to job site safety, demonstrates safe work practices.
Work outside in a wide variety of weather conditions and to meet the physical demands of the position, including mobility needed to complete tasks.
Climbing and operating on ladders, able to handle at least 50 lbs.
Effective communication with foremen, supervisors, and other WTI and Tremco employees
Job Requirements:
Commercial Roofing: All levels; at least 1 year preferred
Reliable form of transportation
Acceptable background check per company standards
Ability to pass a pre-employment drug screen and physical
The hourly rate for applicants in this position generally ranges between $20 and $33.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
ABOUT US
Tremco Construction Products Group (CPG) brings together Tremco Incorporated's Commercial Sealants & Waterproofing and Roofing & Building Maintenance operating divisions; Dryvit Systems, Inc.; Nudura Inc.; Willseal; Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada, Inc.
Structures with Tremco CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
Six-sided solutions from Tremco CPG companies deliver demonstrable performance at the lowest possible life-cycle cost, and stop leaks before they happen through ongoing maintenance programs.
Building owners gain the peace of mind that comes with industry-leading system warranties - all from a single source platform.Apply for this ad Online! ....Read more...
Type: Permanent Location: Bentonville, Arkansas
Posted: 2026-09-09 15:13:41
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Machine Operator starts, troubleshoots, and operates manufacturing equipment safely.
There are three Machine Operator levels (I, II, & III).
The level will be determined by experience, ability to assume various roles on the plant floor, and demonstrated ability to independently troubleshoot and problem-solve machine issues resulting in efficient cycles and minimal downtime.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform work in a safe manner by following all written and verbally communicated safety rules and procedures.
Follow standard work procedures to operate and maintain assigned machine(s).
Routinely meet or exceed production output rates per standards.
Ensure product meets certain tolerances and specifications.
Perform routine inspections per quality standards.
Understand production instructions.
Maintain accurate paperwork.
Package, label, and store products.
Cross-train on other production functions as business need dictates.
Clean and maintain assigned area to ensure proper functionality.
Report and assist with resolving safety, quality, and mechanical issues.
Participate in the continuous improvement process.
If appropriate, set up and operate various off-line and secondary equipment.
EDUCATION REQUIREMENT:
No formal educational required.
EXPERIENCE REQUIREMENT:
No prior experience or training.
CERTIFICATES, LICENSES, REGISTRATIONS:
Forklift certification preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Ability to function effectively in a team setting.
Ability to multi-task while maintaining attention to detail.
Demonstrates reliability, flexibility, and dependability.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The hourly rate for applicants in this position generally ranges between $17.25 and $19.55.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Ashland, Ohio
Posted: 2026-09-09 15:13:40
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
Ensures that the assigned revenue, margin and product mix objectives, within the corporate business framework, are met or exceeded.
This is to be accomplished by securing, developing, and managing key architects, designers, general contractors, distributors, subcontractors, and end-user accounts.
This position will also own and manage all related performance and service metrics for the assigned accounts in the Twin Cities Metro geography.
You must live in the Minneapolis / St Paul Meto area and be available to travelin within the geography.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Achieves or exceeds assigned sales goals and expectations.
Works primarily with existing accounts, while seeking and developing new account opportunities to influence and increase use of Tremco CPG products in assigned territory.
Manages assigned accounts to establish business development opportunities through account penetration, analysis, partnership with key decision makers, and strategic initiatives.
Drives product specifications and project opportunities throughout assigned territory.
Leverages industry knowledge, marketplace dynamics and key relationships both internally and externally to develop trusted partnerships and advisory relationships with customers with a focus on problem identification, exploration and resolution.
Annually prepares and delivers strategic business/territory plans for each customer with monthly forecasts.
Consistently and efficiently follows the standard sales process to identify prospects and decision makers, gain customer commitment, predict sales probability, and effectively close deals.
Manages day-to-day contact, exchanges information succinctly, truthfully and ethically while addressing issues directly and tactfully in pursuit of mutual interest and benefit.
Develops and delivers technical, high quality and directed digital collateral, product prospectus, presentations, and business correspondence in support of the overall sales process.
Collaborates with senior staff to coordinate and execute product knowledge training sessions with internal and external customers, as appropriate, utilizing supplier representatives.
Leverages all available technology on a daily basis for productivity and effective lead generation, account maintenance, sales and expense tracking, forecasting, account reviews, customer contact, presentations, etc.
Works collaboratively with internal support resources to develop teamwork through cooperation, trust and mutual respect.
Attends and presents business unit products and services at industry conventions and trade shows.
Maintains extensive product knowledge in all product lines and service offerings.
Adheres to and enforces all company policies, pricing, and operational procedures with special attention to the professional image of the company.
Performs other related duties as required, requested or assigned.
EDUCATION
Bachelor's Degree in Business, Sales, Construction Management and 2-3 years of construction or industry experience OR
Minimum High School Diploma or GED with 5 years of construction or industry experience
EXPERIENCE
Two plus years related experience and/or training in the commercial construction industry
Construction knowledge (i.e., waterproofing, air barriers, framing, modular, etc.)
Knowledge and experience with EIFs, Facades, and/or stucco application
Assembly line related product segments
Basic knowledge of product chemistries
OTHER SKILLS AND ABILITIES:
Ability to travel extensivelywithin assigned territory.
Must be well organized,self-motivated, with outstandingwritten and verbalcommunication skills
Proficient with Microsoft Office Suite (Word, Excel, PowerPoint)
Salesforce.com or other CRM software experience preferred
Possess a professional curiosity to figure out how things work or are put together
Ability to retain knowledge and training
Proven ability to understand, use, and manage your own emotions in positive ways to relieve stress, communicate effectively, empathize with others, overcome challenges and diffuse conflict.
Demonstrates self-awareness and emotional self-control through adaptability, achievement orientation, and a positive outlook.
Accepts and utilizes feedback effectively.
Reads an audience and adjust style and approach accordingly.
Excellent written and verbal communication skills
Strong presentations skills
Excellent interpersonal and organizational skills
Ability to build relationships and deliver exceptional customer service.
OTHER SKILLS AND ABILITIES:
The base salary range for applicants in this position generally is $85 to $115K depending on experience plus incentive compensation.
This starting rate is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Saint Paul, Minnesota
Posted: 2026-09-09 15:13:39
-
JOB DESCRIPTION
Summer 2027 Internship Opportunity!
Title: Chemist Intern
Location: St.
Louis, Missouri
Summary:
Are you ready to kickstart your career with a company that's making a global impact? Carboline is looking for motivated, curious, and driven students to join our team for an unforgettable summer internship experience! This immersive 12-week program (Anticipated: May 17, 2027 - August 6, 2027), offers a unique opportunity to gain valuable experience, build lasting connections, and make a meaningful impact-all before heading back to campus.
Step into the lab and bring chemistry to life! Our Chemist Internships offers hands-on experience in areas such as product development, applied research, or analytical testing.
You'll work side-by-side with senior chemists to design, perform, and analyze experiments focused on high-performance coatings, linings, and fireproofing technologies.
From day one, you'll take ownership of a real-world project, sharpen your technical skills, and present your findings to industry leaders-gaining invaluable insight into the fast-paced world of industrial chemistry.
What You'll Gain:
Meaningful, hands-on experience working on impactful projects that contribute to Carboline's success.
Exposure to cross-functional collaboration and insight into how a global organization operates.
Professional development opportunities, including mentorship from experienced leaders.
A chance to enhance your skills and apply classroom knowledge in a real-world setting.
Participation in team-building activities and a workplace culture that values innovation, integrity, and growth.
Minimum Requirements:
Currently pursuing a degree in Chemistry, Chemical Engineering, or a related field.
Available to work 30-40 hours per week from May through August.
Strong communication, organization, teamwork, and interpersonal skills.
A proactive attitude and willingness to learn.
Physical Requirements:
This position requires minimal physical activity but does require standing and computer usage for extended times (up to 8 hours/day).
Students must have housing arrangements in or near St.
Louis, MO for the summer, as housing allowance is not provided.
Basic knowledge of PPE and lab settings and equipment.
Essential Functions:
Gain hands-on experience with lab instruments and testing procedures to confidently conduct experiments.
Participate in all stages of applied research, review relevant technical literature, objective identification, formulation development, preparation, calibration, application, performance evaluation, and data analysis to support technical initiatives.
Design and execute experiments under expert mentorship as part of a defined research project.
Analyze results and draw meaningful scientific conclusions that support innovation.
Perform statistical experimental design to identify trends, compare results against specifications, and contribute to technical conclusions.
Present project findings to peers, senior executives, and business leaders, showcasing your impact.
Maintain strict adherence to all safety protocols and laboratory best practices, ensuring the proper handling of chemicals and raw materials while upholding a clean, organized, and fully compliant laboratory environment.
Uphold the company's safety and quality standards throughout all research activities.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best."Apply for this ad Online! ....Read more...
Type: Permanent Location: St. Louis, Missouri
Posted: 2026-09-09 15:13:39
-
JOB DESCRIPTION
Basic Function and Scope of Responsibilities:
Sanitation is responsible for all activities involved in maintaining the cleanliness and food safe environment of the Processing facility, surrounding area and equipment.
Reports to the Production supervisor and receives direction concerning sanitation activities.
Perform daily sanitation of all processing lines and mixing rooms.
Ensure food safety and food defense in the plant.
Promotes a safe work environment through knowledge of the sanitation program and commitment to a safe workplace for all.
Ensures that staff are informed of corporate safety requirements and that safety is a priority in day to day functions.
Develops and implements new methods, procedures, and systems to improve quality and food safety performance, determine and implement corrective actions.
Follow best practices for safety, SDS guidelines, and the proper use of personal protective equipment.
Responsible for filling out daily sanitation logs, performance reports and shift paperwork.
Regularly complete training in methods of improving sanitation processes
Makes certain that all areas are kept clean of waste, debris, and liquids to avoid safety hazards
Ensures that at the end of the shift all documentation pertinent to sanitation.
Maintains effective communications between the Manager and shift supervisors.
Other duties as assigned by manager.
Education Requirements:
High School Diploma or equivalent
Must possess good reading, writing and math skills.
Must always be safety conscious.
Must be able to lift up to 60 lbs.
Must be self-directed and able to work without close supervision
Willing and able to work overtime as needed
Hardworking, dependable, and safety conscious
Bilingual - English/Spanish is preferred
Willingness to work varied shifts, including nights, weekends and holidays
Strong quantitative skills, interpersonal skills and the ability to think critically.
Ability to effectively plan, organize and prioritize work.
Read and understand chemical labels.
Read and understand HACCP along with SQF and OSHA requirements.
Demonstrated ability to motivate and train employees
Training, Skills, Knowledge and/or Experience:
Must possess good reading, writing and math skills.
Must always be safety conscious.
Must be able to lift up to 60 lbs.
Must be self-directed and able to work without close supervision
Willing and able to work overtime as needed
Hardworking, dependable, and safety conscious
Bilingual - English/Spanish is preferred
Willingness to work varied shifts, including nights, weekends and holidays
Strong quantitative skills, interpersonal skills and the ability to think critically.
Ability to effectively plan, organize and prioritize work.
Read and understand chemical labels.
Read and understand HACCP along with SQF and OSHA requirements.
Position Reports To:
Production Supervisor Apply for this ad Online! ....Read more...
Type: Permanent Location: Elgin, Illinois
Posted: 2026-09-09 15:13:39
-
JOB DESCRIPTION
Summer 2027 Internship Opportunity!
Title: CI Engineering Intern
Location: Lake Charles, Louisiana
Summary:
Are you ready to kickstart your career with a company that's making a global impact? Carboline is looking for motivated, curious, and driven students to join our team for an unforgettable summer internship experience! This immersive 12-week program (Anticipated: May 17, 2027 - August 6, 2027), offers a unique opportunity to gain valuable experience, build lasting connections, and make a meaningful impact-all before heading back to campus.
Ready to make an impact this summer? As a Continuous Improvement (CI) Intern, you'll dive into real-world manufacturing challenges and help drive smarter, faster, and more efficient production processes.
You'll work side-by-side with experienced engineers, learn Lean Manufacturing principles, and contribute to projects that reduce waste, improve quality, and boost performance.
This is your chance to turn ideas into action and gain hands-on experience in a fast-paced, innovation-driven environment.
What You'll Gain:
Meaningful, hands-on experience working on impactful projects that contribute to Carboline's success.
Exposure to cross-functional collaboration and insight into how a global organization operates.
Professional development opportunities, including mentorship from experienced leaders.
A chance to enhance your skills and apply classroom knowledge in a real-world setting.
Participation in team-building activities and a workplace culture that values innovation, integrity, and growth.
Minimum Requirements:
Currently pursuing a degree in Engineering, Chemistry, or a related field.
Available to work 30-40 hours per week from May to August.
Comfortable using Microsoft Office and eager to learn new tools.
Strong communication, organization, teamwork, and interpersonal skills.
A proactive attitude, willingness to learn, and initiative.
Strong excel skills.
Preferred: Passion for process improvement and manufacturing operations and basic understanding of Lean or Six Sigma.
Physical Requirements:
Primarily office-based with extended computer use (up to 8 hours/day).
Occasional visits to the production floor will require proper footwear and PPE.
Must be able to lift/move up to 15 pounds as needed.
Occasionally exposed to moving mechanical parts; noise level is typically moderate.
Students must have housing arrangements in or near Lake Charles, LA for the summer, as housing allowance is not provided.
Essential Functions:
Gather and analyze production data to uncover trends, inefficiencies, and opportunities for improvement.
Support ongoing process improvement projects using Lean and Six Sigma methodologies.
Create and update clear, user-friendly procedures and training materials.
Participate in/lead team meetings to brainstorm ideas and evaluate process enhancements.
Shadow engineers and quality professionals to gain hands-on insight into manufacturing systems.
Assist with safety and environmental initiatives to promote a responsible and compliant workplace.
Take on additional tasks and projects that support team goals and help build your professional skills.
Champion Carboline's commitment to safety and quality by adhering to all relevant policies and procedures.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best."Apply for this ad Online! ....Read more...
Type: Permanent Location: Lake Charles, Louisiana
Posted: 2026-09-09 15:13:38
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Machine Operator starts, troubleshoots, and operates manufacturing equipment safely.
There are three Machine Operator levels (I, II, & III).
The level will be determined by experience, ability to assume various roles on the plant floor, and demonstrated ability to independently troubleshoot and problem-solve machine issues resulting in efficient cycles and minimal downtime.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform work in a safe manner by following all written and verbally communicated safety rules and procedures.
Follow standard work procedures to operate and maintain assigned machine(s).
Routinely meet or exceed production output rates per standards.
Ensure product meets certain tolerances and specifications.
Perform routine inspections per quality standards.
Understand production instructions.
Maintain accurate paperwork.
Package, label, and store products.
Cross-train on other production functions as business need dictates.
Clean and maintain assigned area to ensure proper functionality.
Report and assist with resolving safety, quality, and mechanical issues.
Participate in the continuous improvement process.
If appropriate, set up and operate various off-line and secondary equipment.
EDUCATION REQUIREMENT:
No formal educational required.
EXPERIENCE REQUIREMENT:
No prior experience or training.
CERTIFICATES, LICENSES, REGISTRATIONS:
Forklift certification preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Ability to function effectively in a team setting.
Ability to multi-task while maintaining attention to detail.
Demonstrates reliability, flexibility, and dependability.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The hourly rate for applicants in this position generally ranges between $17.25 and $19.55.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Ashland, Ohio
Posted: 2026-09-09 15:13:38
-
JOB DESCRIPTION
Summer 2027 Internship Opportunity!
Title: Chemist Intern
Location: St.
Louis, Missouri
Summary:
Are you ready to kickstart your career with a company that's making a global impact? Carboline is looking for motivated, curious, and driven students to join our team for an unforgettable summer internship experience! This immersive 12-week program (Anticipated: May 17, 2027 - August 6, 2027), offers a unique opportunity to gain valuable experience, build lasting connections, and make a meaningful impact-all before heading back to campus.
Step into the lab and bring chemistry to life! Our Chemist Internships offers hands-on experience in areas such as product development, applied research, or analytical testing.
You'll work side-by-side with senior chemists to design, perform, and analyze experiments focused on high-performance coatings, linings, and fireproofing technologies.
From day one, you'll take ownership of a real-world project, sharpen your technical skills, and present your findings to industry leaders-gaining invaluable insight into the fast-paced world of industrial chemistry.
What You'll Gain:
Meaningful, hands-on experience working on impactful projects that contribute to Carboline's success.
Exposure to cross-functional collaboration and insight into how a global organization operates.
Professional development opportunities, including mentorship from experienced leaders.
A chance to enhance your skills and apply classroom knowledge in a real-world setting.
Participation in team-building activities and a workplace culture that values innovation, integrity, and growth.
Minimum Requirements:
Currently pursuing a degree in Chemistry, Chemical Engineering, or a related field.
Available to work 30-40 hours per week from May through August.
Strong communication, organization, teamwork, and interpersonal skills.
A proactive attitude and willingness to learn.
Physical Requirements:
This position requires minimal physical activity but does require standing and computer usage for extended times (up to 8 hours/day).
Students must have housing arrangements in or near St.
Louis, MO for the summer, as housing allowance is not provided.
Basic knowledge of PPE and lab settings and equipment.
Essential Functions:
Gain hands-on experience with lab instruments and testing procedures to confidently conduct experiments.
Participate in all stages of applied research, review relevant technical literature, objective identification, formulation development, preparation, calibration, application, performance evaluation, and data analysis to support technical initiatives.
Design and execute experiments under expert mentorship as part of a defined research project.
Analyze results and draw meaningful scientific conclusions that support innovation.
Perform statistical experimental design to identify trends, compare results against specifications, and contribute to technical conclusions.
Present project findings to peers, senior executives, and business leaders, showcasing your impact.
Maintain strict adherence to all safety protocols and laboratory best practices, ensuring the proper handling of chemicals and raw materials while upholding a clean, organized, and fully compliant laboratory environment.
Uphold the company's safety and quality standards throughout all research activities.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best."Apply for this ad Online! ....Read more...
Type: Permanent Location: St. Louis, Missouri
Posted: 2026-09-09 15:13:37
-
JOB DESCRIPTION
Summer 2027 Internship Opportunity!
Title: CI Engineering Intern
Location: Lake Charles, Louisiana
Summary:
Are you ready to kickstart your career with a company that's making a global impact? Carboline is looking for motivated, curious, and driven students to join our team for an unforgettable summer internship experience! This immersive 12-week program (Anticipated: May 17, 2027 - August 6, 2027), offers a unique opportunity to gain valuable experience, build lasting connections, and make a meaningful impact-all before heading back to campus.
Ready to make an impact this summer? As a Continuous Improvement (CI) Intern, you'll dive into real-world manufacturing challenges and help drive smarter, faster, and more efficient production processes.
You'll work side-by-side with experienced engineers, learn Lean Manufacturing principles, and contribute to projects that reduce waste, improve quality, and boost performance.
This is your chance to turn ideas into action and gain hands-on experience in a fast-paced, innovation-driven environment.
What You'll Gain:
Meaningful, hands-on experience working on impactful projects that contribute to Carboline's success.
Exposure to cross-functional collaboration and insight into how a global organization operates.
Professional development opportunities, including mentorship from experienced leaders.
A chance to enhance your skills and apply classroom knowledge in a real-world setting.
Participation in team-building activities and a workplace culture that values innovation, integrity, and growth.
Minimum Requirements:
Currently pursuing a degree in Engineering, Chemistry, or a related field.
Available to work 30-40 hours per week from May to August.
Comfortable using Microsoft Office and eager to learn new tools.
Strong communication, organization, teamwork, and interpersonal skills.
A proactive attitude, willingness to learn, and initiative.
Strong excel skills.
Preferred: Passion for process improvement and manufacturing operations and basic understanding of Lean or Six Sigma.
Physical Requirements:
Primarily office-based with extended computer use (up to 8 hours/day).
Occasional visits to the production floor will require proper footwear and PPE.
Must be able to lift/move up to 15 pounds as needed.
Occasionally exposed to moving mechanical parts; noise level is typically moderate.
Students must have housing arrangements in or near Lake Charles, LA for the summer, as housing allowance is not provided.
Essential Functions:
Gather and analyze production data to uncover trends, inefficiencies, and opportunities for improvement.
Support ongoing process improvement projects using Lean and Six Sigma methodologies.
Create and update clear, user-friendly procedures and training materials.
Participate in/lead team meetings to brainstorm ideas and evaluate process enhancements.
Shadow engineers and quality professionals to gain hands-on insight into manufacturing systems.
Assist with safety and environmental initiatives to promote a responsible and compliant workplace.
Take on additional tasks and projects that support team goals and help build your professional skills.
Champion Carboline's commitment to safety and quality by adhering to all relevant policies and procedures.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best."Apply for this ad Online! ....Read more...
Type: Permanent Location: Lake Charles, Louisiana
Posted: 2026-09-09 15:13:30
-
JOB DESCRIPTION
Summer 2027 Internship Opportunity!
Title: Digital Marketing Intern
Location: St.
Louis, Missouri
Summary:
Are you ready to kickstart your career with a company that's making a global impact? Carboline is looking for motivated, curious, and driven students to join our team for an unforgettable summer internship experience! This immersive 12-week program (Anticipated: May 17, 2027 - August 6, 2027), offers a unique opportunity to gain valuable experience, build lasting connections, and make a meaningful impact-all before heading back to campus.
Step into the fast-paced world of digital marketing with a hands-on internship that offers meaningful project experience and opportunities to develop key marketing skills.
As a Digital Marketing Intern, you will work alongside experienced marketing professionals to support Carboline's digital presence through website enhancements, social media initiatives, and digital advertising efforts.
You'll gain real-world experience in content creation, brand management, digital strategy, and audience engagement while helping strengthen and grow Carboline's online presence.
What You'll Gain:
Meaningful, hands-on experience working on impactful projects that contribute to Carboline's success.
Exposure to cross-functional collaboration and insight into how a global organization operates.
Professional development opportunities, including mentorship from experienced leaders.
A chance to enhance your skills and apply classroom knowledge in a real-world setting.
Participation in team-building activities and a workplace culture that values innovation, integrity, and growth.
Minimum Requirements:
Currently pursuing a degree in Marketing, Communication, Digital Media, or a related field.
Available to work 30-40 hours per week from May through August.
Strong communication, organization, and interpersonal skills.
A proactive, detail-oriented, and passionate attitude and willingness to learn.
Physical Requirements:
Primarily office-based with extended computer use (up to 8 hours/day).
Students must have housing arrangements in or near St.
Louis, MO for the summer, as housing allowance is not provided.
No unusual lifting, environmental, or exertion requirements.
Essential Functions:
Assist the Digital Marketing Specialist with website updates and enhancements to improve the user experience and keep content current.
Support and strengthen Carboline's brand voice through social media posting, monitoring, and audience engagement.
Research, implement, and maintain digital advertising campaigns to support brand awareness and business growth.
Assist with improving and optimizing marketing automation tools and processes.
Champion Carboline's commitment to safety and quality by adhering to all relevant policies and procedures.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best
." Apply for this ad Online! ....Read more...
Type: Permanent Location: St. Louis, Missouri
Posted: 2026-09-09 15:13:29
-
JOB DESCRIPTION
Summer 2027 Internship Opportunity!
Title: Process Engineering Intern
Location: Green Bay, Wisconsin
Summary:
Are you ready to kickstart your career with a company that's making a global impact? Carboline is looking for motivated, curious, and driven students to join our team for an unforgettable summer internship experience! This immersive 12-week program (Anticipated: May 17, 2027 - August 6, 2027), offers a unique opportunity to gain valuable experience, build lasting connections, and make a meaningful impact-all before heading back to campus.
As a Process Engineering Intern, you'll be at the forefront of driving manufacturing excellence-partnering with engineers to streamline processes, boost efficiency, and innovate with LEAN, 5S, Kaizen, and Six Sigma tools.
You'll analyze designs for manufacturability, support safety and sustainability efforts, and help shape smarter production strategies using CAD/CAM and time studies.
This is a fast-paced, hands-on role where your ideas and energy fuel real impact.
What You'll Gain:
Meaningful, hands-on experience working on impactful projects that contribute to Carboline's success.
Exposure to cross-functional collaboration and insight into how a global organization operates.
Professional development opportunities, including mentorship from experienced leaders.
A chance to enhance your skills and apply classroom knowledge in a real-world setting.
Participation in team-building activities and a workplace culture that values innovation, integrity, and growth.
Minimum Requirements:
Currently pursuing a degree in Engineering or a related field.
Available to work 30-40 hours per week from May through August.
Strong communication, organization, teamwork, and interpersonal skills.
A proactive attitude and willingness to learn.
Physical Requirements:
Expect light physical activity and extended computer use (up to 8 hours/day).
Occasional visits to the production floor will require proper footwear and PPE.
Must be able to lift/move up to 15 pounds as needed.
Occasionally exposed to moving mechanical parts; noise level is typically moderate.
Students must have housing arrangements in or near Green Bay, WI for the summer, as housing allowance is not provided.
Essential Functions:
Collaborate with the Engineering Team to explore and optimize manufacturing methods and processes.
Gain exposure to LEAN manufacturing, ergonomics, time studies, 5S, Kaizen, and other productivity improvement methodologies.
Analyze engineering design documents, prototypes, and change orders for manufacturability.
Partner with EH&S personnel to support environmental and safety initiatives.
Assist in evaluating equipment, tooling, materials, and automation vs.
manual production decisions.
Coordinate with cross-functional teams to implement or revise manufacturing processes.
Conduct time studies, document workflows, and contribute to Lean and Six Sigma initiatives.
Utilize CAD/CAM tools for design-related tasks.
Take ownership of additional responsibilities as assigned by the department manager.
Champion Carboline's commitment to safety and quality by adhering to all relevant policies and procedures.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best."Apply for this ad Online! ....Read more...
Type: Permanent Location: Green Bay, Wisconsin
Posted: 2026-09-09 15:13:23
-
JOB DESCRIPTION
Solving challenges is the very foundation of who we are.
After all, our founder, sea captain Robert Fergusson, didn't particularly set out to invent rust preventive paint.
He just wanted to keep his ship intact and stumbled upon a valuable solution.
Today, that discovery is Rust-Oleum Corporation.
Founded in 1921, the same passion that drove the Captain to create the world's first rust-preventative paint still drives us today.
When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry.
Our creative and talented team of over 2,000 people across every corner of the world help us remain the global leader in protective paints and coatings for both home and industry.
As our Material Handler, you will work in our distribution center to pick orders on a rotating 2-2-3 schedule for 12 hour shifts (6pm-6:30am).We can't ship without you.
Every day you will work alongside a hardworking and fast-paced team to select orders from the warehouse floor and place them on the correct pallet.
To thrive you must be prepared to lift packages of 50 pounds repeatedly and always think safety first.
You'll be someone your team can rely on to make sure our orders are right before they're in route to our customers.
As our Material Handler, you don't need experience but you do need strong character.
What does that mean to us?
You pay attention to details because you care as much about hitting production goals as accuracy on your pallet.
Safety matters.
When you see something, you'll say something to a teammate to make sure that everyone leaves as they come.
You'll show up.
We've built a team you can rely on, and we trust each other to show up every day.
Required Experience:
High school diploma or GED.
Strong communication and interpersonal skills; ability to read, write, speak, and understand English.
Ability to lift 50 lbs.
repeatedly for extended periods.
Shift: 6pm-6:30am; 2-2-3 shift rotation (continuous operations schedule)
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.
Internal Applicants: If you have been in your current position for one year (unless waived by your Manager), and meet the position requirements, you are welcome to apply for this position.
Please apply in Oracle on Requisition 14661 under 'Current Jobs'.Apply for this ad Online! ....Read more...
Type: Permanent Location: Kenosha, Wisconsin
Posted: 2026-09-09 15:13:17
-
JOB DESCRIPTION
Title: IT Internship/ Co-Op
Location: Maryland Heights, MO; In Office Role
Schedule: Flexible Options
Part-Time Co-Op (Starting Immediately; 20-30hrs/week) - Ideal for students looking to gain hands-on experience during the academic year.
Full-Time Summer Internship (40hrs/week; Mon - Fri, 8am - 5pm) - Perfect for those seeking experience duing summer break.
Summary:
Ready to dive into the world of IT? You'll work hands-on with real projects that keep our systems running smoothly.
From setting up computers to troubleshooting issues, you'll learn the ropes of IT support while making a real impact.
Minimum Requirements:
Available to work:
Co-Op: 20-30 hours per week OR Internship: 30-40 hours per week from May - August.
Currently pursuing or completed a degree in Computer Science or related field.
Comfortable using Microsoft Office and eager to learn new tools.
Strong communication, organization, teamwork, and interpersonal skills.
A proactive attitude, willingness to learn, and initiative.
Preferred: Experience with SharePoint.
Physical Requirements:
Office-based work with extended computer use (up to 8 hours/day).
Must be able to occasionally lift up to 40 lbs as needed.
Students must have housing arrangements in or near Maryland Heights, MO, as housing allowance is not provided.
Essential Functions:
Assist with setting up IT equipment.
Provide technical support for users (in-office and remote).
Help manage Help Desk tickets and resolve issues.
Troubleshoot applications and assist with system access.
Assist with phone, network, and printer installations.
Conduct new hire IT onboarding presentations.
Perform other tasks as needed.
Champion Carboline's commitment to safety and quality by adhering to all relevant policies and procedures.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best."Apply for this ad Online! ....Read more...
Type: Permanent Location: St. Louis, Missouri
Posted: 2026-09-09 15:13:17
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Republic Powdered Metals, Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and Pure Air Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 3,000 people across North America.
A Filler is primarily responsible for accurately filling finished products into the proper packaging.
Packaging could be 1-gallon cans, 5-gallon pails, 55-gallon drums and large totes.
This position often involves working with industrial and consumer products.
Desired job skills include mechanical knowledge, math, strong attention to detail, and the ability to work within a team.
Your duties include, but are not limited to:
Operating and tending to machines.
Preparing products for delivery and storage and handling.
Moving materials to produce a smooth workflow.
Inspecting equipment to ensure safe operation.
Communicate with Buyer/Planner and Group Lead when inventory is low.
Read Process Orders and verify correct amount of labels and correct pails.
Work with Group Lead for Daily Production Schedule.
Run automated label machine.
Operate a forklift.
Keeping inventory of Labels, Black Ribbons, Red Ribbons, Black and White pails.
Print labels (SAP).
Daily Labeler Machine housekeeping.
Maintain 1 Day lead-time on labeled pails for production.
Run automated label machine.
Other duties as assigned.All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Medina, Ohio
Posted: 2026-09-09 15:13:17
-
JOB DESCRIPTION
BUILD YOUR FUTURE WHILE YOU HELP BUILD A BETTER WORLD!
Tremco Construction Products Group brings together Roofing & Building Maintenance, Commercial Sealants, Waterproofing divisions, Tremco Barrier Solutions Inc., Dryvit, Nudura and Willseal brands, Prebuck LLC, Weatherproofing Technologies, Inc., Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
If you're looking for a place to build a career and a life, with great benefits, advancement opportunity, technology, people and a commitment to a sustainable future, you've found it with us.
PROJECT ADMINISTRATOR
This is a 100% remote position that will support the Pacific Northwest and Pacific Southwest Regions of our Western Division.
Preferred candidate will reside in the Mountain or Pacific time zone.
GENERAL PURPOSE OF THE JOB:
Project Administrators play a crucial role in ensuring the smooth execution and success of projects by providing essential administrative support in collaboration with Construction Managers and Field Representatives throughout various project phases.
Specifically, the Business Operations Project Administrator is tasked with managing and coordinating all administrative aspects for an array of project types.
This includes services like Patch and Repair, Patch and Repair Plus, General Contracting, Safety Patch and Repair, Building Envelope services, IAQ Services (both standalone and integrated with General Contracting), Job Site Inspections, Roofing Advisor Days, Consulting, Diagnostics, TRACE, ACT, and several emergency repair services.
Key responsibilities encompass managing contractor payables, handling customer billings and receivables, ensuring compliance with standards and policies, applying book pricing and WTI documentation policies, overseeing commission and discounting policies, processing change orders, document management, financial data entry, and coordinating communications with Field Resources and Customers as required.
Success in this role requires a high level of professionalism, strong organizational and prioritization skills, effective time management, and proficiency in relevant technology and software.
Excellent interpersonal, written, and oral communication skills, coupled with meticulous attention to detail, accuracy, and a self-motivated attitude, are vital.
The administrator must work effectively both independently and as part of a team, demonstrating the ability to collaborate with customers, field staff, and various internal stakeholders.
This position involves regular interaction with multiple departments and teams, including General Services, General Contracting field operations, Field Representatives, Business Operations, IT, Finance/Accounting, Warranty, Tremcare, Sales, Accounts Payable, Credit, and Products.
Given the dynamic and fast-paced nature of the role, flexibility and adaptability are essential, as the Project Administrator must navigate and respond to evolving project requirements and organizational needs.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
The Project Administrator plays an integral role in the project lifecycle by validating, organizing, and ensuring compliance for all project documentation and financial processes.
Upon receiving SAP Sales Order information from Customer Service Representatives, the administrator confirms all compliance requirements based on the WTI Price Book Policy/Procedures and Contract Management Policy, completing checklists to ensure data accuracy and completeness.
Key responsibilities include managing critical project documents, such as vendor applications, subcontracts, purchase orders, Master Service Agreements, specifications, certificates of insurance, payment and performance bonds, prevailing wage rates, certified payroll reports, and state-specific compliance documentation.
Project Administrators also facilitate and manage compliance submissions as needed.
This role includes dispatching service orders to WTI Technicians, tailored to the specific project type.
For General Contracting projects, the administrator provides WTI Superintendents with essential service orders and field report links to streamline daily reporting.
Additionally, they maintain a comprehensive tracking spreadsheet for all projects, providing up-to-date project insights.
Throughout each project, the Project Administrator coordinates with Construction Managers, Field Representatives, field technicians, customers, and management to ensure seamless operations.
Project management duties cover tracking time and expenses, managing payables over 30 days, monitoring plan versus actual costs, verifying that all documents (such as bonds, insurance, and submittals) are submitted and approved, ensuring costs align with budget expectations, and validating all projects older than 90 days.
This role includes preparing customer invoices with accuracy and timeliness, adhering to book pricing, time and materials (T&M), not-to-exceed (NTE) limits, lump-sum pricing, and customer-specific billing requirements.
Project Administrators must understand and apply WTI's commission and discount policies when processing invoices across both General Contracting and General Services.
They also review projects for job closeout audits, updating planned versus actual costs, and completing a job closing checklist for final approval.
The Project Administrator is essential to ensuring that WTI's policies and procedures are followed precisely, maintaining accurate financial data for reporting at month-end, quarter-end, and fiscal year-end.
This role requires a comprehensive understanding of WTI's operational, financial, and compliance frameworks to support accurate project execution and reporting.
OTHER REQUIRED DUTIES:
Project Management within the following technology platforms, Salesforce, e-Builder, RoofSnap, OLI, Smartsheet, WTI Quick Price App, Concur
Hours to Day Conversions
Calculating Market Price
Weekly backlog meetings
Review and resolve customer disputes
Manage tech service expenses
Assist with travel and hotel arrangements for maintenance and repair routes
Coordinate larger supply and equipment purchases, arrange pickup, payments and cost allocation
Coordinate material orders
Review and process Readsoft workflow items
Monitor daily, weekly and monthly reports
Customer/Vendor Billing Portals
Bi-weekly Project Review Meetings
Payment Reconciliation
Report low margin jobs
Facilitate effective communication
Process Implementation Reviews
Assist in the preparation of project presentations, reports, and other project-related materials
Problem Solving
Conflict Management
Escalation of concerns and issues
Archive Project files as necessary
Participate in special projects when necessary
EDUCATION:
Business Management/Administration or equivalent combination of education and experience.
EXPERIENCE:
4-7 years related experience and/or training
Project Administration/Management, Construction Accounting, Sarbanes-Oxley, public procurement or job order contract, prevailing wage
OTHER SKILLS AND ABILITIES:
Ability to handle multiple tasks, prioritize effectively, and manage time efficiently.
Keeping records, documents, and project files organized and easily accessible.
Excellent written and verbal communication skills to interact with team members, stakeholders, and clients.
Proficiency in project management software, as well as standard office applications like Microsoft Office (Word, Excel, PowerPoint).
Capacity to identify potential issues early on and proactively seek solutions or escalate problems as needed.
Ability to think critically and adapt to changing project conditions.
Understanding of project budgets, cost tracking, and financial reporting.
Ability to assist with financial documentation, such as purchase orders, invoices, and expense reports.
Strong time management skills to handle project deadlines and ensure timely task completion.
Ability to manage time effectively in a fast-paced environment.
Ability to work well with a diverse group of people, from team members to external vendors.
Skill in fostering a collaborative, respectful work environment.
Strong focus on meeting the needs of clients and stakeholders, understanding project requirements, and keeping them updated on project progress.
Ability to resolve conflicts and keep the team working toward common goals.
Handling disputes diplomatically and maintaining positive relationships among project team members.
Knowledge of State prevailing wage, DB and SCAThe salary range for applicants in this position generally ranges between $57,000 and $66,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Benefits:
Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Commission, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2026-09-09 15:13:16
