-
JOB DESCRIPTION
Employer Description
Legend Brands, an industry leader and long standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
Job Summary
Under general supervision, the Manufacturing Engineer (MfgE) I/II/Senior is responsible for developing, implementing, directing and coordinating manufacturing materials and processes to achieve the most efficient, cost effective and high-quality production possible in a safe and environmentally responsible manner.
The MfgE is responsible for leading the transition from new product development to manufacturing; providing daily manufacturing support for existing products; and leading implementation of design changes and quality improvements.
The MfgE works closely with all functional groups to develop robust, cost-effective manufacturing and assembly processes and related documentation for use throughout the manufacturing facility.
The MfgE drives continuous improvement and best practices by applying lean methods to eliminate waste in the value stream.
Supervision Responsibility
None
Essential Duties
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
Reasonable accommodations may be made to enable qualified individuals with a disability to perform the essential duties.
The list below is intended to be illustrative of the responsibilities of this position and is not all encompassing, nor does it constitute an employment agreement, and the duties may change at any time. Analyze, develop, and recommend design approaches to meet production requirements for new or improved products and/or processes using a Design for Manufacturing (DFM) and Design for Quality (DFQ) methods. Help coordinate manufacturing launch of new/revised products including tooling, equipment, methods and shop floor support. Create Engineering Change Orders (ECOs) and drawing package updates to support implementation of new product development efforts and changes to existing products. Specify/Design and coordinate fabrication of patterns, molds, fixtures, and gauges required in the manufacture of components and assemblies. Provide shop floor support, interfacing with other functional groups as required, to resolve processing issues with sound, lasting, corrective actions. Participate in "make/buy" decisions to determine the most cost-effective manner in which to manufacture hardware. Review new tooling (injection mold, vacuum form, and rotomold) packages to ensure all tooling meets part design and manufacturing requirements. Establish process control parameters and help to define Standard Work to optimize efficiency and First Pass Yield (FPY). Analyze space requirements and workflow, and design the layout of equipment and workstations to ensure maximum efficiency and an ergonomically sound work environment. Perform research and development of manufacturing processes including production flow, assembly methods and production equipment.
Conduct studies and evaluations aimed at developing new technologies to reduce cost/lead time, and improve quality/product flow Performs other related duties as assigned.
Minimum Qualifications
The requirements listed below are representative of the education, experience, certification and/or licensure required.
An equivalent combination of education and experience to perform the essential duties and meet the necessary employment standards may be considered.
Education and Experience
Bachelor's Degree in Manufacturing Engineering or Mechanical Engineering required. ________________________________________________________________________
Manufacturing Engineer II
This is the next level of the Manufacturing Engineer series and is required to have a minimum of 4 years of previous experience and working knowledge and competent demonstration of the following: Design for Manufacturing and Design for Quality in new products and changes to existing products to improve process efficiency, ergonomics, tooling/fixturing, etc. Ability to address issues in the manufacturing environment through development of process improvements Support new product development early in the product design phase to ensure DFM and DFQ are considered and implemented early in the project. Strong SolidWorks design and drawing package skills that meet project deadlines and internal/external customer needs. Demonstrated team leadership with strong communication skills. This level requires the following certifications: SolidWorks CAD Design Professional (CSWP) Manufacturing Engineer II perform broader range of duties, proven skillset to fully perform Manufacturing Engineer responsibilities, more technically complex tasks, expected to set an example of professional efficiency, and provide technical direction to less experienced staff.
May also operate more than one station. The Manufacturing Engineer II receives minimal instruction or assistance and is fully aware of the operating procedures and policies associated with the department. ____________________________________________________________________________
Senior Manufacturing Engineer
This is the senior level of the Manufacturing Engineer series and is required to have a minimum of 7 years of previous experience and working knowledge and competent demonstration of the following: All the skills listed in MfgE II position with greater experience and understanding of plastics injection molding part design and processes. Proven leadership ability to lead groups through the implementation of a new product and/or process change. Strong design skills in tooling/fixturing/jigs for production. Understanding and deployment of Design of Experiments methodologies to uncover optimum processing conditions. Excellent analytical skills in the areas of process efficiency to focus efforts on "bottle neck" elimination and develop justification for capital improvements. This level requires the following certifications: Design of Experiments SolidWorks Administration PDM (CPAP) Senior Manufacturing Engineer perform broader skilled work and specialize in one trade or craft but perform work in a variety of disciplines.
The Senior Manufacturing Engineer receives minimal instruction or assistance and is fully aware of the operating procedures and policies associated with the department.
_________________________________________________________________________
Hiring Range
Between $86K - $105K annually
Benefits
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, leaves of absence, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability. Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's All job offers are contingent upon satisfactory pre-employment drug test and background screening. Accepting applications through April 30, 2025.
Applications will be reviewed as received and on-going interviews will be conducted as necessary. Apply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2025-03-20 06:20:00
-
JOB DESCRIPTION
DAP is looking for Engineering Design Intern for Summer 2025 based out of Fenton, MO.
Job Responsibilities
The summer intern would work under mentorship of Senior Design Engineer. Participate in assembly, testing, and evaluation of engineering prototypes. Conduct upfront engineering system research for new to market products. Utilize SolidWorks CAD program to generate and update engineering documentation.
Requirements
Major: Mechanical Engineering College classification: Sophomore or Junior. Able to use Excel, Word and MS Project to complete assigned tasks. A working familiarity with SolidWorks is preferrable. Candidate should have excellent communication skills since they will be interfacing with team members in Baltimore and in Fenton.
Pay
$17 / hour
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world. At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Fenton, Missouri
Posted: 2025-03-20 06:19:58
-
JOB DESCRIPTION
DAP is looking for Engineering / Design Intern for Summer 2025.
Job Responsibilities
The summer intern would work under mentorship of Senior Design Engineer. Participate in assembly, testing, and evaluation of engineering prototypes. Conduct upfront engineering system research for new to market products. Utilize SolidWorks CAD program to generate and update engineering documentation.
Requirements
Major: Mechanical Engineering College classification: Sophomore or Junior. Able to use Excel, Word and MS Project to complete assigned tasks. A working familiarity with SolidWorks is preferrable. Candidate should have excellent communication skills since they will be interfacing with team members in Baltimore and in Fenton.
Pay
$17 / hour
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world. At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Baltimore, Maryland
Posted: 2025-03-20 06:19:53
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America. The Engineering, Facilities and Maintenance Manager is responsible for directing all engineering activities and maintaining and upgrading the Site's facilities and production equipment.
In addition, this position is responsible for maintaining/advancing a viable and visual Preventative Maintenance Program at the facility, while identifying capital requirements for the annual capital plan.
Responsibilities also include developing and assisting in value stream design and implementation of lean principles and tools within the manufacturing environment.
This includes, but is not limited to, assisting with value stream mapping, employee training, continuous improvement event facilitation, waste identification and elimination, problem solving (through the scientific method), work area and station design and layout, visual control implementation, material flow, and progress tracking and communication.
Lastly, this resource acts as a passionate advocate for a cultural change toward lean thinking throughout the organization.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Partner with LEAN leadership in eliminating unplanned production interruptions. Use DAKOTA as the compliance tool to report incidents, near misses and non-conformances, and to maintain compliance with EH&S. Work with the maintenance crew to implement the needed preventative measures. Recommend design modifications to eliminate machine or system malfunctions. Prepare capital projects for submission to management.
Included are costs, schedule, Job Hazard Analysis (JHA), Process Hazard Analysis (PHA), and needed procedures. Serve as lead project engineer for approved capital projects with the goal of on time and on budget completion. Develop and administer a viable and visual Preventative Maintenance Program that reduces downtime and improves overall reliability of production and production supporting machinery.
Responsible for identifying capital requirements for the facility's annual capital plan and budget. Direct, review, and approve product design and changes consistent with MOC procedures.
Recruit departmental employees; assign, direct, and evaluate their work; and oversee the development and maintenance of staff competence.
Analyze annual site utility expenditure and develop plan to optimize plant efficiency to reduce costs (ISO 14001).
Perform administrative functions such as reviewing and writing reports, approving expenditures, enforcing rules, and making decisions about the purchase of materials or services.
Integrate the plant PHA initiative with the appropriate capital projects. Investigate equipment failures and difficulties to diagnose faulty operations and work with the maintenance crew to implement the needed preventative measures. Interface with leadership, operators, and maintenance to develop needed TPM programs. Support SPC, DOE's, and other Quality initiatives. Lead Engineer for the production processes. Develop facility infrastructure upgrade plan.
EDUCATION REQUIREMENT:
B.S.
in Mechanical, Chemical or Electrical Engineering.
EXPERIENCE REQUIREMENT:
At least 1-2 years in a supervisory role. 5-10 years of Facility and Process Engineering experience. Experience managing capital projects required. Experience is Engineering Management. PHA and "Process Safety Management" experience a positive.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance. Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. Computers and Electronics - Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming. Complex Problem Solving - Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions. Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense. Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong.
It does not involve solving the problem, only recognizing there is a problem. People Interaction - Ability to work with diverse groups to reach consensus regarding problems, and needed changes.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, balance, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally ranges between $99,222 and $124,027.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: North Kingstown, Rhode Island
Posted: 2025-03-20 06:16:29
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America. The Engineering, Facilities and Maintenance Manager is responsible for directing all engineering activities and maintaining and upgrading the Site's facilities and production equipment.
In addition, this position is responsible for maintaining/advancing a viable and visual Preventative Maintenance Program at the facility, while identifying capital requirements for the annual capital plan.
Responsibilities also include developing and assisting in value stream design and implementation of lean principles and tools within the manufacturing environment.
This includes, but is not limited to, assisting with value stream mapping, employee training, continuous improvement event facilitation, waste identification and elimination, problem solving (through the scientific method), work area and station design and layout, visual control implementation, material flow, and progress tracking and communication.
Lastly, this resource acts as a passionate advocate for a cultural change toward lean thinking throughout the organization.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Partner with LEAN leadership in eliminating unplanned production interruptions. Use DAKOTA as the compliance tool to report incidents, near misses and non-conformances, and to maintain compliance with EH&S. Work with the maintenance crew to implement the needed preventative measures. Recommend design modifications to eliminate machine or system malfunctions. Prepare capital projects for submission to management.
Included are costs, schedule, Job Hazard Analysis (JHA), Process Hazard Analysis (PHA), and needed procedures. Serve as lead project engineer for approved capital projects with the goal of on time and on budget completion. Develop and administer a viable and visual Preventative Maintenance Program that reduces downtime and improves overall reliability of production and production supporting machinery.
Responsible for identifying capital requirements for the facility's annual capital plan and budget. Direct, review, and approve product design and changes consistent with MOC procedures.
Recruit departmental employees; assign, direct, and evaluate their work; and oversee the development and maintenance of staff competence.
Analyze annual site utility expenditure and develop plan to optimize plant efficiency to reduce costs (ISO 14001).
Perform administrative functions such as reviewing and writing reports, approving expenditures, enforcing rules, and making decisions about the purchase of materials or services.
Integrate the plant PHA initiative with the appropriate capital projects. Investigate equipment failures and difficulties to diagnose faulty operations and work with the maintenance crew to implement the needed preventative measures. Interface with leadership, operators, and maintenance to develop needed TPM programs. Support SPC, DOE's, and other Quality initiatives. Lead Engineer for the production processes. Develop facility infrastructure upgrade plan.
EDUCATION REQUIREMENT:
B.S.
in Mechanical, Chemical or Electrical Engineering.
EXPERIENCE REQUIREMENT:
At least 1-2 years in a supervisory role. 5-10 years of Facility and Process Engineering experience. Experience managing capital projects required. Experience is Engineering Management. PHA and "Process Safety Management" experience a positive.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance. Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. Computers and Electronics - Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming. Complex Problem Solving - Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions. Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense. Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong.
It does not involve solving the problem, only recognizing there is a problem. People Interaction - Ability to work with diverse groups to reach consensus regarding problems, and needed changes.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, balance, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally ranges between $99,222 and $124,027.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: North Kingstown, Rhode Island
Posted: 2025-03-20 06:12:36
-
JOB DESCRIPTION
Employer Description
Legend Brands, an industry leader and long standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
Job Summary
Under general supervision, the Manufacturing Engineer (MfgE) I/II/Senior is responsible for developing, implementing, directing and coordinating manufacturing materials and processes to achieve the most efficient, cost effective and high-quality production possible in a safe and environmentally responsible manner.
The MfgE is responsible for leading the transition from new product development to manufacturing; providing daily manufacturing support for existing products; and leading implementation of design changes and quality improvements.
The MfgE works closely with all functional groups to develop robust, cost-effective manufacturing and assembly processes and related documentation for use throughout the manufacturing facility.
The MfgE drives continuous improvement and best practices by applying lean methods to eliminate waste in the value stream.
Supervision Responsibility
None
Essential Duties
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
Reasonable accommodations may be made to enable qualified individuals with a disability to perform the essential duties.
The list below is intended to be illustrative of the responsibilities of this position and is not all encompassing, nor does it constitute an employment agreement, and the duties may change at any time. Analyze, develop, and recommend design approaches to meet production requirements for new or improved products and/or processes using a Design for Manufacturing (DFM) and Design for Quality (DFQ) methods. Help coordinate manufacturing launch of new/revised products including tooling, equipment, methods and shop floor support. Create Engineering Change Orders (ECOs) and drawing package updates to support implementation of new product development efforts and changes to existing products. Specify/Design and coordinate fabrication of patterns, molds, fixtures, and gauges required in the manufacture of components and assemblies. Provide shop floor support, interfacing with other functional groups as required, to resolve processing issues with sound, lasting, corrective actions. Participate in "make/buy" decisions to determine the most cost-effective manner in which to manufacture hardware. Review new tooling (injection mold, vacuum form, and rotomold) packages to ensure all tooling meets part design and manufacturing requirements. Establish process control parameters and help to define Standard Work to optimize efficiency and First Pass Yield (FPY). Analyze space requirements and workflow, and design the layout of equipment and workstations to ensure maximum efficiency and an ergonomically sound work environment. Perform research and development of manufacturing processes including production flow, assembly methods and production equipment.
Conduct studies and evaluations aimed at developing new technologies to reduce cost/lead time, and improve quality/product flow Performs other related duties as assigned.
Minimum Qualifications
The requirements listed below are representative of the education, experience, certification and/or licensure required.
An equivalent combination of education and experience to perform the essential duties and meet the necessary employment standards may be considered.
Education and Experience
Bachelor's Degree in Manufacturing Engineering or Mechanical Engineering required. ________________________________________________________________________
Manufacturing Engineer II
This is the next level of the Manufacturing Engineer series and is required to have a minimum of 4 years of previous experience and working knowledge and competent demonstration of the following: Design for Manufacturing and Design for Quality in new products and changes to existing products to improve process efficiency, ergonomics, tooling/fixturing, etc. Ability to address issues in the manufacturing environment through development of process improvements Support new product development early in the product design phase to ensure DFM and DFQ are considered and implemented early in the project. Strong SolidWorks design and drawing package skills that meet project deadlines and internal/external customer needs. Demonstrated team leadership with strong communication skills. This level requires the following certifications: SolidWorks CAD Design Professional (CSWP) Manufacturing Engineer II perform broader range of duties, proven skillset to fully perform Manufacturing Engineer responsibilities, more technically complex tasks, expected to set an example of professional efficiency, and provide technical direction to less experienced staff.
May also operate more than one station. The Manufacturing Engineer II receives minimal instruction or assistance and is fully aware of the operating procedures and policies associated with the department. ____________________________________________________________________________
Senior Manufacturing Engineer
This is the senior level of the Manufacturing Engineer series and is required to have a minimum of 7 years of previous experience and working knowledge and competent demonstration of the following: All the skills listed in MfgE II position with greater experience and understanding of plastics injection molding part design and processes. Proven leadership ability to lead groups through the implementation of a new product and/or process change. Strong design skills in tooling/fixturing/jigs for production. Understanding and deployment of Design of Experiments methodologies to uncover optimum processing conditions. Excellent analytical skills in the areas of process efficiency to focus efforts on "bottle neck" elimination and develop justification for capital improvements. This level requires the following certifications: Design of Experiments SolidWorks Administration PDM (CPAP) Senior Manufacturing Engineer perform broader skilled work and specialize in one trade or craft but perform work in a variety of disciplines.
The Senior Manufacturing Engineer receives minimal instruction or assistance and is fully aware of the operating procedures and policies associated with the department.
_________________________________________________________________________
Hiring Range
Between $86K - $105K annually
Benefits
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, leaves of absence, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability. Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's All job offers are contingent upon satisfactory pre-employment drug test and background screening. Accepting applications through April 30, 2025.
Applications will be reviewed as received and on-going interviews will be conducted as necessary. Apply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2025-03-20 06:12:08
-
mmWave RF PCB Design Engineer required to refine existing satellite communications terminals hardware and contribute to the next generation of products.
You will test, debug and diagnose complex PCB assemblies while supporting both established products and new designs.
Requirements
Satellite antenna terminal design experience integrating mmWave RF antennas.
RF hardware circuit expert.
Programming and scripting skills with Python, MATLAB or similar.
Laboratory test equipment experience with oscilloscopes, spectrum analysers, signal generators.
SPI, I2C and CAN standards.
PCBA rework skills, including experience with irons, hot air, and IR rework equipment.
Role
Test production PCB and PCBA assemblies, diagnose faults to the component level, and document test yields and rework actions.
Develop automated test systems.
Work in cross functional hardware and software teams to find and remove inefficiency.
Meet manufacturing targets while maintaining quality and test standards.
Burild and work up PCB or PCBA board debugging, including initial power on tests and visual inspection.
Improve design documentation such as schematics, drawings, BOMs, and update formal documentation with ECNs.
Create and document Work Instructions for testing, repairing, and modifying products. ....Read more...
Type: Permanent Location: Reading, England
Start: ASAP
Duration: Permanent
Salary / Rate: £38000 - £80000 Per Annum None
Posted: 2025-03-18 23:35:02
-
Electrical Control Engineer required to join a growing company who integrate plant, processing, operational technology with digital transformations for energy, water, renewables, manufacturing and other highly regulated industrial environments.
You will support the integration of telemetry systems with hardware and software solutions from design, testing, installation to commissioning in collaboration with clients.
Requirements
18th Edition Wiring Regulations.
NVQ Level 3 or higher qualification in Electrical Installations or similar.
Electrical control systems experience including installing electrical equipment.
Able to work from electrical diagrams and schematics.
Telemetry station knowledge.
Desirable skills, PLC, RTU or similar control systems.
ISaGRAF, AutoCAD, Inspection and Testing qualifications.
Full UK driving license.
Responsibilities
Collaborate with clients to understand their needs and translate them into engineering solutions.
Integrate telemetry systems with existing hardware and software solutions, including design, testing, installation, and commissioning.
Create and maintain technical documentation, including schematics, diagrams, and specifications.
Provide site surveys and technical support for the wider team and clients.
Travel frequently to customer sites across the UK.
Participate in design reviews and offer constructive feedback. ....Read more...
Type: Permanent Location: Stoke-on-Trent, England
Start: ASAP
Duration: Permanent
Salary / Rate: £35000 - £52000 Per Annum None
Posted: 2025-03-18 22:31:43
-
Senior Hardware Design Engineer will support the design and implementation of hardware subsystems for advanced mobile and fixed satellite tracking antenna terminals.
Key Responsibilities
Lead complex hardware designs and manage priorities.
Architect and design terminal hardware, ensuring quality and cost goals.
Present design analyses during reviews.
Verify and test hardware in a lab setting.
Mentor junior engineers.
Requirements
6 to 10 years in hardware design and testing.
Strong PCB design skills, Altium preferred.
Experience in power supply design and compliance testing.
Knowledge of embedded systems, high-speed digital design, and interconnect technologies. ....Read more...
Type: Permanent Location: Reading, England
Start: ASAP
Duration: Permanent
Salary / Rate: £60000 - £90000 Per Annum None
Posted: 2025-03-18 11:52:59
-
Senior Electronics Engineer required to join a growing team designing and developing motion systems and control algorithms for motor, valve and other mechatronic applications.
Requirements
Extensive experience in electronics development for industrial applications.
PCB design, power electronics, EMI or EMC testing, and simulation.
Linear, SMPS, signal conditioning, and driver circuit design.
PSpice and LTspice.
Hardware architecture design, microcontroller-based designs, and testing for compliance.
Degree and ideally Masters in Electronics, Mechatronics, Embedded Electronics or similar subject.
Full hardware development life cycle, including verification and validation.
Wireless communication protocols and high speed PCB design knowledge.
Responsibilities
Design and develop innovative, cost-effective electronics and controls for proportional valves.
Develop designs, specifications, and recommendations for new and existing product electronics control boards.
Technical peer reviews and provide solutions to complex development and field issues.
Oversee testing and validation, ensuring products meet required certifications. ....Read more...
Type: Permanent Location: Waterlooville, England
Start: ASAP
Duration: Permanent
Salary / Rate: £48000 - £70000 Per Annum None
Posted: 2025-03-18 10:34:14
-
JOB DESCRIPTION
DAP is looking for Engineering / Design Intern for Summer 2025.
Job Responsibilities
The summer intern would work under mentorship of Senior Design Engineer. Participate in assembly, testing, and evaluation of engineering prototypes. Conduct upfront engineering system research for new to market products. Utilize SolidWorks CAD program to generate and update engineering documentation.
Requirements
Major: Mechanical Engineering College classification: Sophomore or Junior. Able to use Excel, Word and MS Project to complete assigned tasks. A working familiarity with SolidWorks is preferrable. Candidate should have excellent communication skills since they will be interfacing with team members in Baltimore and in Fenton.
Pay
$17 / hour
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world. At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Baltimore, Maryland
Posted: 2025-03-18 06:08:26
-
JOB DESCRIPTION
DAP is looking for Engineering Design Intern for Summer 2025 based out of Fenton, MO.
Job Responsibilities
The summer intern would work under mentorship of Senior Design Engineer. Participate in assembly, testing, and evaluation of engineering prototypes. Conduct upfront engineering system research for new to market products. Utilize SolidWorks CAD program to generate and update engineering documentation.
Requirements
Major: Mechanical Engineering College classification: Sophomore or Junior. Able to use Excel, Word and MS Project to complete assigned tasks. A working familiarity with SolidWorks is preferrable. Candidate should have excellent communication skills since they will be interfacing with team members in Baltimore and in Fenton.
Pay
$17 / hour
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world. At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Fenton, Missouri
Posted: 2025-03-18 06:08:13
-
Are you a Project Manager - Electronics looking for the next step in your career, based in Rochester, Kent?
My client are a world leading manufacturer of commercial and industrial fire detection and emergency lighting solutions.
They are looking for a Project Manager - Electronics to lead the design, develop and sustain electronic hardware products.
The job will include working on development cycles for existing products and new product development.
You will also be doing analogue and digital design at system, product, and circuit level.
The successful candidate will be working alongside the existing multidiscipline R&D team but should also be comfortable working alone.
The successful candidate will have a strong track record in delivery of engineering projects; they will be self-motivated, enthusiastic, technically excellent, business savvy and a strong communicator.
The successful Project Manager - Electronics will come from a manufacturing background, either mechanical or electronic background.
Skills and Responsibilities of this Project Manager - Electronics job:
- Create project plans, present to and review with customers.
- Provide technical leadership and direction to cross functional project teams (hardware, software, mechanical).
- Manage the NPI development and ensure new products are delivered on time and to quality and cost targets.
- Experience with electronic assembly techniques.
- Advanced Microsoft Professional experience.
- Provable Project Management experience with Waterfall & Scrum.
Benefits include hybrid working, and a company bonus which has paid over 10% of salary in recent years.
This Project Manager - Electronics will join a highly successful technology company in the Rochester area and play an important role in their projects going forward.
They are renowned for investing into their employees and providing excellent training & career progression.
If you are interested in the Project Manager - Electronics job based in Rochester, Kent with a hybrid working environment, please send an updated version of your CV to RWilcocks@RedlineGroup.Com or call Ricky Wilcocks on 01582 878810 or 079317 88834 for further information, otherwise, we always welcome the opportunity to discuss other engineering jobs. ....Read more...
Type: Permanent Location: Rochester, England
Start: ASAP
Salary / Rate: £40000 - £55000 per annum
Posted: 2025-03-18 00:00:03
-
JOB DESCRIPTION
Employer Description
Legend Brands, an industry leader and long standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
Job Summary
Under general supervision, the Manufacturing Engineer (MfgE) I/II/Senior is responsible for developing, implementing, directing and coordinating manufacturing materials and processes to achieve the most efficient, cost effective and high-quality production possible in a safe and environmentally responsible manner.
The MfgE is responsible for leading the transition from new product development to manufacturing; providing daily manufacturing support for existing products; and leading implementation of design changes and quality improvements.
The MfgE works closely with all functional groups to develop robust, cost-effective manufacturing and assembly processes and related documentation for use throughout the manufacturing facility.
The MfgE drives continuous improvement and best practices by applying lean methods to eliminate waste in the value stream.
Supervision Responsibility
None
Essential Duties
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
Reasonable accommodations may be made to enable qualified individuals with a disability to perform the essential duties.
The list below is intended to be illustrative of the responsibilities of this position and is not all encompassing, nor does it constitute an employment agreement, and the duties may change at any time. Analyze, develop, and recommend design approaches to meet production requirements for new or improved products and/or processes using a Design for Manufacturing (DFM) and Design for Quality (DFQ) methods. Help coordinate manufacturing launch of new/revised products including tooling, equipment, methods and shop floor support. Create Engineering Change Orders (ECOs) and drawing package updates to support implementation of new product development efforts and changes to existing products. Specify/Design and coordinate fabrication of patterns, molds, fixtures, and gauges required in the manufacture of components and assemblies. Provide shop floor support, interfacing with other functional groups as required, to resolve processing issues with sound, lasting, corrective actions. Participate in "make/buy" decisions to determine the most cost-effective manner in which to manufacture hardware. Review new tooling (injection mold, vacuum form, and rotomold) packages to ensure all tooling meets part design and manufacturing requirements. Establish process control parameters and help to define Standard Work to optimize efficiency and First Pass Yield (FPY). Analyze space requirements and workflow, and design the layout of equipment and workstations to ensure maximum efficiency and an ergonomically sound work environment. Perform research and development of manufacturing processes including production flow, assembly methods and production equipment.
Conduct studies and evaluations aimed at developing new technologies to reduce cost/lead time, and improve quality/product flow Performs other related duties as assigned.
Minimum Qualifications
The requirements listed below are representative of the education, experience, certification and/or licensure required.
An equivalent combination of education and experience to perform the essential duties and meet the necessary employment standards may be considered.
Education and Experience
Bachelor's Degree in Manufacturing Engineering or Mechanical Engineering required. ________________________________________________________________________
Manufacturing Engineer II
This is the next level of the Manufacturing Engineer series and is required to have a minimum of 4 years of previous experience and working knowledge and competent demonstration of the following: Design for Manufacturing and Design for Quality in new products and changes to existing products to improve process efficiency, ergonomics, tooling/fixturing, etc. Ability to address issues in the manufacturing environment through development of process improvements Support new product development early in the product design phase to ensure DFM and DFQ are considered and implemented early in the project. Strong SolidWorks design and drawing package skills that meet project deadlines and internal/external customer needs. Demonstrated team leadership with strong communication skills. This level requires the following certifications: SolidWorks CAD Design Professional (CSWP) Manufacturing Engineer II perform broader range of duties, proven skillset to fully perform Manufacturing Engineer responsibilities, more technically complex tasks, expected to set an example of professional efficiency, and provide technical direction to less experienced staff.
May also operate more than one station. The Manufacturing Engineer II receives minimal instruction or assistance and is fully aware of the operating procedures and policies associated with the department. ____________________________________________________________________________
Senior Manufacturing Engineer
This is the senior level of the Manufacturing Engineer series and is required to have a minimum of 7 years of previous experience and working knowledge and competent demonstration of the following: All the skills listed in MfgE II position with greater experience and understanding of plastics injection molding part design and processes. Proven leadership ability to lead groups through the implementation of a new product and/or process change. Strong design skills in tooling/fixturing/jigs for production. Understanding and deployment of Design of Experiments methodologies to uncover optimum processing conditions. Excellent analytical skills in the areas of process efficiency to focus efforts on "bottle neck" elimination and develop justification for capital improvements. This level requires the following certifications: Design of Experiments SolidWorks Administration PDM (CPAP) Senior Manufacturing Engineer perform broader skilled work and specialize in one trade or craft but perform work in a variety of disciplines.
The Senior Manufacturing Engineer receives minimal instruction or assistance and is fully aware of the operating procedures and policies associated with the department.
_________________________________________________________________________
Hiring Range
Between $86K - $105K annually
Benefits
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, leaves of absence, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability. Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's All job offers are contingent upon satisfactory pre-employment drug test and background screening. Accepting applications through April 30, 2025.
Applications will be reviewed as received and on-going interviews will be conducted as necessary. Apply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2025-03-17 14:09:09
-
You will be working on projects in the Defence, Avionics and Automotive industries.
The ideal candidate is passionate about computer technology and embedded software development and enjoys hands-on projects such as building computers.
Requirements
Degree in Computer Science or related field.
At least 5 years of experience in Defence, Avionics, Automotive, Medical industries
Strong knowledge of computer hardware (GPUs, Memory, Processors) and computer systems (Protocols, Networking, Secure BOOT).
Experience with Embedded Software Development and low-level coding (Drivers, I2C, SPI, CAN, Ethernet, USB, Serial).
Experience with UML-based design tools and programming languages (C, C++, Python, JavaScript).
Knowledge of Bare Metal, Linux, and RTOS systems
Understanding of Automated Testing and regulatory frameworks (DO178C, IEC61508, MISRA, C++).
Strong documentation and reporting skills. ....Read more...
Type: Permanent Location: Letchworth Garden City, England
Start: ASAP
Duration: Permanent
Salary / Rate: £65000 - £450000 Per Annum None
Posted: 2025-03-14 10:49:15
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America. The Engineering, Facilities and Maintenance Manager is responsible for directing all engineering activities and maintaining and upgrading the Site's facilities and production equipment.
In addition, this position is responsible for maintaining/advancing a viable and visual Preventative Maintenance Program at the facility, while identifying capital requirements for the annual capital plan.
Responsibilities also include developing and assisting in value stream design and implementation of lean principles and tools within the manufacturing environment.
This includes, but is not limited to, assisting with value stream mapping, employee training, continuous improvement event facilitation, waste identification and elimination, problem solving (through the scientific method), work area and station design and layout, visual control implementation, material flow, and progress tracking and communication.
Lastly, this resource acts as a passionate advocate for a cultural change toward lean thinking throughout the organization.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Partner with LEAN leadership in eliminating unplanned production interruptions. Use DAKOTA as the compliance tool to report incidents, near misses and non-conformances, and to maintain compliance with EH&S. Work with the maintenance crew to implement the needed preventative measures. Recommend design modifications to eliminate machine or system malfunctions. Prepare capital projects for submission to management.
Included are costs, schedule, Job Hazard Analysis (JHA), Process Hazard Analysis (PHA), and needed procedures. Serve as lead project engineer for approved capital projects with the goal of on time and on budget completion. Develop and administer a viable and visual Preventative Maintenance Program that reduces downtime and improves overall reliability of production and production supporting machinery.
Responsible for identifying capital requirements for the facility's annual capital plan and budget. Direct, review, and approve product design and changes consistent with MOC procedures.
Recruit departmental employees; assign, direct, and evaluate their work; and oversee the development and maintenance of staff competence.
Analyze annual site utility expenditure and develop plan to optimize plant efficiency to reduce costs (ISO 14001).
Perform administrative functions such as reviewing and writing reports, approving expenditures, enforcing rules, and making decisions about the purchase of materials or services.
Integrate the plant PHA initiative with the appropriate capital projects. Investigate equipment failures and difficulties to diagnose faulty operations and work with the maintenance crew to implement the needed preventative measures. Interface with leadership, operators, and maintenance to develop needed TPM programs. Support SPC, DOE's, and other Quality initiatives. Lead Engineer for the production processes. Develop facility infrastructure upgrade plan.
EDUCATION REQUIREMENT:
B.S.
in Mechanical, Chemical or Electrical Engineering.
EXPERIENCE REQUIREMENT:
At least 1-2 years in a supervisory role. 5-10 years of Facility and Process Engineering experience. Experience managing capital projects required. Experience is Engineering Management. PHA and "Process Safety Management" experience a positive.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance. Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. Computers and Electronics - Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming. Complex Problem Solving - Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions. Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense. Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong.
It does not involve solving the problem, only recognizing there is a problem. People Interaction - Ability to work with diverse groups to reach consensus regarding problems, and needed changes.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, balance, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally ranges between $99,222 and $124,027.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: North Kingstown, Rhode Island
Posted: 2025-03-13 22:55:57
-
JOB DESCRIPTION
This position is accountable for providing capital engineering support within Operations.
This includes executing engineering projects for capital installations $20M+, project management from design through startup, and providing long range technical planning and strategies for the business.
Operations
Provides engineering support to Production to optimize packaging process. Develop packaging automation into reliable and robust production equipment with optimal performance. proactively identify and drive opportunities to improve packaging performance, reduce cost, increase material utilization, improve first time right, integrate new products/processes into production and reduce variation.
Implement necessary changes and update all documentation (including drawings and SOP's) Collect, review and present equipment reliability results and performance data to determine optimal equipment set-up to improve Overall Equipment Effectiveness
Capital Plan
Responsible for capital project execution including equipment selection, justification, CAR processing, purchasing, and installation.
Support start-up efforts including in person training and documentation. Manage projects through design review process from project scope charters through successful startup transition to the local site team.
This includes working with the plant operational teams on providing training, writing appropriate standard operating procedures, and maintenance training plans & parts. Design to incorporate Lean principles to improve reliability, ease of use & maintenance, minimize changeover times, and to minimize production losses.
Safety
Responsible for achieving and maintaining safety goals relative to the maintenance and engineering functions.
Responsible for safety devices, safe design, etc.
of all equipment.
Administer process hazard analyses (PHA's) for identified materials, processes, and RHP Compliance
Requirements:
Bachelor's degree in mechanical or chemical Engineering is preferred.
Industrial and Electrical Engineers with Hands-on experience will be considered. 5 years' experience in manufacturing environment. Ability to read and interpret process drawings (process flow diagrams and P&ID's).
PLC with ladder logic analysis.
Strong analytical and troubleshooting skills. project management, written and verbal communication skills are required along with a high level of initiative.
strong leadership skills, in project and people management in a continuous improvement environment in the areas of production, safety, quality and Lean manufacturing principles
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $7.3 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world. At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Dallas, Texas
Posted: 2025-03-13 22:52:59
-
Embedded Software Developer required to design, implement, and validate software for embedded devices.
Skills
Embedded Software Engineering in C and C++.
Hardware and protocol knowledge ideally of ARM chipsets and SPI, I2C, UART, CAN or USB communications.
Real time operating systems such as Keil RTX, FreeRTOS or ThreadX.
IDEs ideally Keil uVision, Freescale CodeWarrior, STM32cubeIDE or NXP MCUxpresso.
Role
Designing, developing, implementing and testing embedded software systems in C and C++ for ARM Cortex Microcontrollers.
Code for ThreadX and FreeRTOS real time operating systems.
Replicate, debug and resolve any problems. ....Read more...
Type: Permanent Location: Hemel Hempstead, England
Start: ASAP
Duration: Permanent
Salary / Rate: £55000 - £70000 Per Annum None
Posted: 2025-03-13 17:36:35
-
Experienced Embedded Software Engineer required to join an existing programming and control team using Model Based Design methodology for battery solutions using C and C++.
Skills
Embedded software development experience in industry.
MATLAB and Simulink modelling and simulation.
Experience developing software test plans and implementing software unit testing and integrated Testing using MIL, SIL and HIL.
Masters or PhD in Electrical, Electronic or Software Engineering, ideally relating to automotive and stationary energy storage application.
C, C++, Python and scripting.
MCU???s, such as Infineon, TI, NXP or ST.
Lower layer modules or drivers.
Debugging tools and troubleshooting both software and hardware.
Github, Gitlab, Bitbucket or other version control.
AUTOSAR architecture and RTE,
Vector or ETAS AUTOSAR configuration tools
Algorithms implementation in AUTOSAR and Auto-Code generation
Automotive communication protocols ETH, CAN, Flexray.
CANape, CAN analyzer, Control Desk, ECU Diagnostics
Role
Low level software development, integration, verification, and debugging, including.
MCAL, MCU, CAN, SPI, LIN, ETH, I2C, PWM, etc.
Design and develop complex platform software for powertrain electronic control units.
Configurating DEM, DCM, NM, NvM, UDS modules for Diagnostics.
Developing complex driver, OTA, and other functions as needed. ....Read more...
Type: Permanent Location: Warwick, England
Start: ASAP
Duration: Permanent
Salary / Rate: £40000 - £60000 Per Annum None
Posted: 2025-03-13 17:35:32
-
Real Time Embedded Firmware Engineer require to join an existing team to understand and analyse internal requirements then model, design and develop software architecture, applications and working solutions.
You will work in cross functional teams including software, hardware and user functions owning and where possible automating built in test processes and systems.
Requirements
Experience in developing real time software in C, C++ and Python.
Degree or higher qualification in relevant subject.
GNSS Positioning knowledge of signal generation.
Windows, Linux or other UNIX, Git and Subversion experience.
Driver development, GPU, IQ signal data, RF interface design including FPGA, Microblaze etc.
all highly desirable.
Advanced mathematical skills highly beneficial.
Responsibilities
The design, development and qualification of real time software solutions.
API Design and Development
Digital signal processing algorithm development.
Support product development and planning. ....Read more...
Type: Permanent Location: Paignton, England
Start: ASAP
Duration: Permanent
Salary / Rate: £38000 - £60000 Per Annum None
Posted: 2025-03-13 17:32:25
-
We are looking for a highly proficient Embedded Systems Engineer.
The selected candidate will be instrumental in developing core application software architecture and introducing new capabilities.
This role offers significant remote work flexibility but also requires some presence at our Yarnton office.
Required Skills
Deep expertise in modern C++ .
Proven experience in designing significant software systems and tackling challenging projects.
Proficiency in STL, Boost, and Python.
Experience with computer vision, sensor fusion, and scientific computing.
Familiarity with OpenGL, Qt or QML, and game engines.
Key Responsibilities
Develop and improve core application software architecture.
Design APIs, protocols, and plugins for integration with internal and external software and hardware systems.
Work on high-performance algorithms and highly parallel real-time processing frameworks.
Develop tools for testing, analysis, and data visualisation.
Research, design, and present new technologies and innovative approaches ....Read more...
Type: Permanent Location: Oxford, England
Start: ASAP
Duration: Permanent
Salary / Rate: £55000 - £65000 Per Annum None
Posted: 2025-03-13 17:24:52
-
Embedded Programmer required to work on the development of state-of-art video display devices.
Key Skills
Embedded systems development.
C++
Device drivers for embedded systems using DMA / interrupt.
Hardware design requirements around embedded processors.
Socket programming
USB, SPI, I2C and other bus interfaces.
Role responsibilities
Develop low level code and middleware for real time hardware.
Design and development of software and systems to specifications and in accordance with ISO9001.
Type: Permanent Location: Dartford, England
Start: ASAP
Duration: Permanent
Salary / Rate: £36000 - £60000 Per Annum None
Posted: 2025-03-13 17:20:41
-
Firmware / Embedded Software Engineer required to design and manage embedded software development for the hardware components of high-performance software and hardware products which interface with hardware and PC applications.
Key Skills
Embedded software in C and C++
FreeRTOS or other RTOS including interrupt handling code and device drivers.
Bluetooth wireless protocol, 802.15.4, and WiFi
ARM-based MCUs and/or MPUs - ARM Cortex M Series (32-bit ARM Cortex-M4F Processor) preferred
Low-level connectivity - UART, SPI, I2C, USB, and SDRAM, JTAG communication protocols
Reading circuit diagrams and data sheets, creating specifications
Software engineering, SDLC, and TDD and unit testing
Degree(s) in Computer science, Embedded systems, Software engineering or a related technical field.
What you will be doing
Design and implement new firmware for custom suite of embedded devices.
Interface with hardware designers and application developers, ensuring seamless integration.
Maintain and expand functionality on our existing products
Design, develop, test, review and debug system software
Design manufacturing test protocols to automatically test hardware during a large scale manufacturing process
This is a fantastic opportunity to join a diverse, practical, well established team working on cutting edge technologies. ....Read more...
Type: Permanent Location: Kidlington, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £60000 Per Annum None
Posted: 2025-03-13 17:19:38
-
The Embedded Software Engineer designs and implements measurement and control embedded firmware.
You will have a strong BSc, MSc, PhD or equivalent in Science or Engineering with low level software development.
Key Skills
C and Assembly languages ideally with some C++.
Hardware and software tools including emulator, simulator, modeling, scopes, logics analyzer, etc.
Microprocessor and DSP based hardware design, ability to read and understand schematics and manufacturer datasheets of components.
Peripherals and serial communications programming.
DSP algorithms and implementation.
Real Time Operating System, Matlab, Object Oriented Design and Embedded C++.
Agile and iterative development
Role Responsibilities
Design and implement embedded software for measurement and control systems incorporating multiple processors using Real Time Operating Systems.
Design of high speed, hard Real Time data acquisition & logging systems.
Testing and debugging hardware or software issues.
Implementation of DSP algorithms.
....Read more...
Type: Permanent Location: Aberdeen, Scotland
Start: ASAP
Duration: permanent
Salary / Rate: £30000 - £48000 Per Annum None
Posted: 2025-03-13 17:15:25
-
Software Engineer required to work on C# and C++ Front ends that drive measurement and control embedded firmware.
You will have a strong BSc, MSc, PhD or equivalent in Science or Engineering with low level software development.
Key Skills
C and Assembly languages with some C# or C++.
Hardware & software tools: emulator, simulator, modeling, scopes, logics analyzer, etc.
Microprocessor and DSP based hardware design, ability to read and understand schematics and manufacturer datasheets of components.
Peripherals and serial communications programming.
DSP algorithms and implementation.
Real Time Operating System, Matlab, Object Oriented Design and Embedded C++.
Agile and iterative development
Role Responsibilities
Design and implement embedded software for measurement and control systems incorporating multiple processors using Real Time Operating Systems.
Design of high speed, hard Real Time data acquisition and logging systems.
Testing and debugging hardware or software issues.
Implementation of DSP algorithms.
....Read more...
Type: Permanent Location: Stroud, England
Start: ASAP
Duration: Permanent
Salary / Rate: £40000 - £60000 Per Annum None
Posted: 2025-03-13 17:14:22
