-
JOB DESCRIPTION
We are seeking experienced Commercial Roofers to join our team.
The skilled Commercial Roofers will be responsible for the maintenance, repairs, and installation of commercial roofing systems.
Benefits:
401K Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Installation of different types of roofing systems such as BUR, EPDM, Single-ply, coatings, and other forms of low-slope roofing systems Safe operation of tools of the trade (hand tools, power tools etc.) Follow OSHA regulations and other regulatory agencies relating to job site safety, demonstrates safe work practices. Work outside in a wide variety of weather conditions and to meet the physical demands of the position, including mobility needed to complete tasks. Climbing and operating on ladders, able to handle at least 50 lbs. Effective communication with foremen, supervisors, and other WTI and Tremco employees
Job Requirements:
Commercial Roofing: All levels; at least 1 year preferred Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical
The hourly rate for applicants in this position generally ranges between $20 and $33.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Benefits: Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
$20.00-$33.00/hora Buscamos techadores comerciales con experiencia para unirse a nuestro equipo.
Los techadores comerciales calificados serán responsables del mantenimiento, las reparaciones y la instalación de los sistemas de techado comerciales.
BENEFICIOS
401KSeguro de saludTiempo libre pagadoReembolso de millasEducación continua
DEBERES Y RESPONSABILIDADES DE EL PUESTO
Instalación de diferentes tipos de sistemas de techado como BUR, EPDM, de una sola capa, revestimientos y otras formas de sistemas de techado de pendiente baja Operación segura de herramientas del oficio (herramientas manuales, herramientas eléctricas, etc.) Siga las regulaciones de OSHA y otras agencias reguladoras relacionadas con la seguridad en el lugar de trabajo, demostrar prácticas de trabajo seguras. Trabaje al aire libre en una amplia variedad de condiciones climáticas y para cumplir con las demandas físicas del puesto, incluida la movilidad necesaria para completar las tareas. Subir y operar en escaleras, capaz de manejar al menos 50 lbs. Comunicación efectiva con capataces, supervisores y otros empleados de WTI y Tremco
REQUISITOS DEL TRABAJO
Techos Comerciales: Todos los niveles; al menos 1 año preferido Medio de transporte confiable Verificación de antecedentes aceptable según los estándares de la empresa Capacidad para pasar una prueba de drogas previa al empleo y examen físico Los solicitantes calificados recibirán consideración para el empleo sin importar su raza, color, religión, origen nacional, sexo, orientación sexual, identidad de género, estado de veterano protegido o discapacidad. Tipo de puesto: Medio tiempo Salario: $20.00 - $33.00 la hora
ABOUT US
Tremco Construction Products Group (CPG) brings together Tremco Incorporated's Commercial Sealants & Waterproofing and Roofing & Building Maintenance operating divisions; Dryvit Systems, Inc.; Nudura Inc.; Willseal; Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada, Inc.
Structures with Tremco CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
Six-sided solutions from Tremco CPG companies deliver demonstrable performance at the lowest possible life-cycle cost, and stop leaks before they happen through ongoing maintenance programs.
Building owners gain the peace of mind that comes with industry-leading system warranties - all from a single source platform.Apply for this ad Online! ....Read more...
Type: Permanent Location: Grand Rapids, Michigan
Posted: 2025-04-08 15:12:06
-
JOB DESCRIPTION
Euclid Chemical is a fully owned subsidiary of RPM International (NYSE: RPM), one of the world's largest coatings companies.
With over 110 years of experience, we provide innovative solutions to the construction and restoration markets through our extensive range of treatments, sealants, coatings, sealers, and decorative products.
Recognized as a 2024 NE Ohio Top Workplace by Energage, Euclid Chemical prides itself on fostering a people-first culture that values collaboration, respect, and growth.
Summary: We are seeking a Dispenser Service Technician (DST) responsible for managing and maintaining dispenser equipment in the field.
This position will involve travel to various customer locations to provide installation, and ongoing maintenance of equipment.
The successful candidate will be detail-oriented, able to work independently, and possess a variety of technical skills in plumbing, electrical work, and fabrication.
Why join our team? Euclid Chemical offers an attractive package for full time personnel, company benefits include but are not limited to:
Medical, Dental and Vision coverage Life Insurance Short Term/Long Term Disability Parental Leave 401k with company match Defined benefit pension plan Vacation and holiday time
SALARY: $55,000 - $65,000 annually plus annual company bonus program
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Responsible for all dispenser equipment in the field. Ability to visit and evaluate a plant to order the proper dispenser equipment needed to do the job right (such as conduit for electrical, hose lengths, position of dispenser, etc.) Install the dispenser equipment and help assist the customer in matching our dispenser to their plant (such as counts, added products, etc.).
When the install is complete tech is responsible to clean up any mess that was created during the visit. Will be responsible to pick up any equipment in the field that needs to be removed, and returned to a Euclid facility.
Responsible to wash out any tanks immediately upon being returned at the Euclid Chemical plant with the guidance of the plant manager on the waste product. Willingness and ability to restore any used equipment that can be reused. Will be required to do paperwork (such as DOT Certifications, Expense Reports, Daily or Weekly Reports, etc.) The DOT Certifications will be done professionally on Euclid Letterhead and handed to the customer. May be asked to transfer safe amounts of material from location to location (such as raw materials for concrete testing, admixture, fiber, etc.). Required to order equipment and install that equipment at the designated customer location and maintain that equipment after installation. Perform preventative maintenance on the equipment when needed. Assist in state inspections where necessary. Respond to customer issues with those dispensers when needed. Assure that their truck is properly equipped with the necessary parts to fix or repair the equipment.
SKILLS AND REQUIREMENTS:
Travel: Ability to travel up to 50% of the time, including overnight stays when required.
Flexibility: A flexible schedule, including early mornings, late nights, and weekends, depending on customer needs.
Work Ethic: Ability to work independently as well as part of a team.
Skills: Strong organizational, problem-solving, and time-management skills.
Basic knowledge of plumbing, electrical work, fabrication, and mathematical concepts is essential.
Physical Requirements: Ability to perform tasks in various environmental conditions and handle equipment safely.
ADDITIONAL REQUIREMENTS:
Valid driver's license and clean driving record. Willingness to complete necessary certifications and safety training as required by the company.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Mobile, Alabama
Posted: 2025-04-08 15:12:06
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Field Material Installer applies coating material to new residential construction (homes, condos, and multi-family projects).
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Load materials, tools, and equipment onto the vehicle to be transported to the jobsite.
Install each job using company-approved methods.
Move each job along at a pace to ensure efficiency and quality.
Complete any necessary prep work for proper installation.
Inspect products and materials for defects prior to installation.
Perform quality checks after products are installedto ensure the job is completed toboththe builder's and Tremco's scope.
Ensure thework areas at theshop and jobsite arecleanedand that trash and wasteare properly disposed.
Complete any necessary paperwork as required for each job.
Comply with all company safety policies and procedures.
Keep timesheetsupto date and accurate.
EDUCATION REQUIREMENT:
No formal education requirement.
EXPERIENCE REQUIREMENT:
No formal experience requirement.
CERTIFICATES, LICENSES, REGISTRATIONS:
Valid driver's licenserequired.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Ohio
Posted: 2025-04-08 15:12:03
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
Work assigned tasks on a production line making below grade waterproofing material using bentonite and High-Density Polyethylene (HDPE).
Operate and observe machinery used in the production process so that malfunctions can be detected, and supervision can be notified.
Measure material and utilize cutting tools to cut materials to specified length.
Fill pails with manufactured material.
Pack and store manufactured material by rolling materials onto a core, place the roll in a bag, and seal with a wire twist tie.
Shrink wrap or band finished goods.
Rework rejected materials.
Box manufactured accessories for further processing or shipment, following prescribed procedures.
Use a forklift to lift and transfer manufactured materials between work and storage areas.
Sift bentonite that is recycled from floors and rejected materials.
Assist in representing environmental and quality ISO management plans.
Participate in facility projects by performing maintenance and repair work related to the facility.
Utilize, sustain, and audit established Lean Manufacturing processes.
Clean work areas, machinery, and equipment.
EDUCATION REQUIREMENT: High school diploma or general education degree (GED)
EXPERIENCE REQUIREMENT: 1+ Years of related experience
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Basic computer skills required.
Attention to detail - this job requires being careful about detail and thorough in completing work tasks.
Selective attention - the ability to concentrate on a task over a period of time without being distracted.
Effective team player with ability to work independently.
Knowledge of machines and tools, including their uses, repair, and maintenance.
ISO knowledge.
Troubleshooting - ability to identify causes of operating errors and determine how to resolve errors.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The hourly rate/salary range for applicants in this position generally ranges between $15.85 and $18.98 .
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Spearfish, South Dakota
Posted: 2025-04-08 15:11:52
-
JOB DESCRIPTION
$20.00-$33.00/hour (not including prevailing wage)
We are seeking experienced Commercial Roofers to join our team.
The skilled Commercial Roofers will be responsible for the maintenance, repairs, and installation of commercial roofing systems.
Benefits:
401K Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Installation of different types of roofing systems such as BUR, EPDM, Single-ply, coatings, and other forms of low-slope roofing systems Safe operation of tools of the trade (hand tools, power tools etc.) Follow OSHA regulations and other regulatory agencies relating to job site safety, demonstrates safe work practices. Work outside in a wide variety of weather conditions and to meet the physical demands of the position, including mobility needed to complete tasks. Climbing and operating on ladders, able to handle at least 50 lbs. Effective communication with foremen, supervisors, and other WTI and Tremco employees
Job Requirements:
Commercial Roofing: All levels; at least 1 year preferred Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
ABOUT US
Tremco Construction Products Group (CPG) brings together Tremco Incorporated's Commercial Sealants & Waterproofing and Roofing & Building Maintenance operating divisions; Dryvit Systems, Inc.; Nudura Inc.; Willseal; Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada, Inc.
Structures with Tremco CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
Six-sided solutions from Tremco CPG companies deliver demonstrable performance at the lowest possible life-cycle cost, and stop leaks before they happen through ongoing maintenance programs.
Building owners gain the peace of mind that comes with industry-leading system warranties - all from a single source platform.Apply for this ad Online! ....Read more...
Type: Permanent Location: Phoenix, Arizona
Posted: 2025-04-08 15:11:51
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
Performs visual and physical inspection, sampling, testing and control of parts, products and raw materials to conform to established specifications, applicable standards and the ISO 9001 Quality System.
ESSENTIAL DUTIES AND RESPONSIBILITIES: Follows the established quality control procedures to ensure all products are manufactured in compliance with IMS, customer specifications, ISO9001:2015 and ISO14000-2015.
Conducts the inspection and testing of raw materials and products, both in process and finished.
Performs color quality control and corrections by interpreting results obtained using appropriate measurements.
Performs measurement checks using tape measure and calibers. Inspects, calibrates and supervises the use of various instrumentation for testing.
Performs data analysis, provides feedback and improvement suggestions to plant personnel, production management, QC Supervisor on all issues concerning quality.
Maintains Quality Control documents and daily reporting of information.
Assists in complaint investigations by performing tests to detect or duplicate issues observed in the field.
Assists in trouble shooting machine functions and production issues as they arise.
Maintains a clean and organized work area.
Performs other duties as assigned.
EDUCATION REQUIREMENT: High school diploma or general education degree (GED) required.
EXPERIENCE REQUIREMENT:
A minimum of 1-2 years experience in a quality control role within a manufacturing environment with oversight of both raw materials and finished goods.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Microsoft Office Suite. Previous experience using enterprise software such as SAP is preferred.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The hourly rate/salary range for applicants in this position generally ranges between $19.00 and $22.87.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: North Kingstown, Rhode Island
Posted: 2025-04-08 15:11:50
-
JOB DESCRIPTION
WE WILL TRAIN YOU! NOW HIRING IN MULTIPLE LOCATIONS!
The Commercial Façade Field Technician actively performs and enforces Company safety policy and program to minimize accidents affecting employees, the public, and property.
They will be responsible for attending safety meetings, complying with governmental regulations, reporting, and investigating accidents, and planning site-specific job safety procedures including:
$21-38/hour (not including prevailing wage)
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Attend and understand daily onsite safety brief prior to the start of the WTI project.
Inspect and ensure safety of surroundings, equipment and tools and identify and discuss any safety concerns.
Execution of project tasks with knowledge of expected production rates, ensuring tools and materials are used safely and efficiently to complete the assigned project. Complete the project per the scope or work, design and specification of contract & engineering documents as directed by foreman.
Responsible to aid foreman in tracking and monitoring project inventory. Maintains highest quality on-site customer relations in projecting positive image. Has knowledge/understanding and performs work in compliance with all governmental rules and regulations affecting work sites and employees, i.e.
OSHA, DOT, EEO/Affirmative Action, EPA, etc. Provides management with earliest possible notification of real and potential job problems. Accepts responsibility for the care, custody, and use of company equipment, material, tools, and other assets as assigned by the WTI Commercial Foreman. Understands and executes proper material and equipment usage, maintenance, and storage. Perform any other duty and/or project as required or assigned by the WTI Foreman and/or Commercial Business Manager. Maintains ethical business conduct.
Job Requirements:
Masons & Tuckpointers Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Cold Applied Waterproofing Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $21 and $38.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Austin, Texas
Posted: 2025-04-08 15:11:50
-
JOB DESCRIPTION
Euclid Chemical is a fully owned subsidiary of RPM International (NYSE: RPM), one of the world's largest coatings companies.
With over 110 years of experience, we provide innovative solutions to the construction and restoration markets through our extensive range of treatments, sealants, coatings, sealers, and decorative products.
Recognized as a 2024 NE Ohio Top Workplace by Energage, Euclid Chemical prides itself on fostering a people-first culture that values collaboration, respect, and growth.
Summary: We are seeking a Dispenser Service Technician (DST) responsible for managing and maintaining dispenser equipment in the field.
This position will involve travel to various customer locations to provide installation, and ongoing maintenance of equipment.
The successful candidate will be detail-oriented, able to work independently, and possess a variety of technical skills in plumbing, electrical work, and fabrication.
Why join our team? Euclid Chemical offers an attractive package for full time personnel, company benefits include but are not limited to:
Medical, Dental and Vision coverage Life Insurance Short Term/Long Term Disability Parental Leave 401k with company match Defined benefit pension plan Vacation and holiday time
SALARY: $55,000 - $65,000 annually plus annual company bonus program
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Responsible for all dispenser equipment in the field. Ability to visit and evaluate a plant to order the proper dispenser equipment needed to do the job right (such as conduit for electrical, hose lengths, position of dispenser, etc.) Install the dispenser equipment and help assist the customer in matching our dispenser to their plant (such as counts, added products, etc.).
When the install is complete tech is responsible to clean up any mess that was created during the visit. Will be responsible to pick up any equipment in the field that needs to be removed, and returned to a Euclid facility.
Responsible to wash out any tanks immediately upon being returned at the Euclid Chemical plant with the guidance of the plant manager on the waste product. Willingness and ability to restore any used equipment that can be reused. Will be required to do paperwork (such as DOT Certifications, Expense Reports, Daily or Weekly Reports, etc.) The DOT Certifications will be done professionally on Euclid Letterhead and handed to the customer. May be asked to transfer safe amounts of material from location to location (such as raw materials for concrete testing, admixture, fiber, etc.). Required to order equipment and install that equipment at the designated customer location and maintain that equipment after installation. Perform preventative maintenance on the equipment when needed. Assist in state inspections where necessary. Respond to customer issues with those dispensers when needed. Assure that their truck is properly equipped with the necessary parts to fix or repair the equipment.
SKILLS AND REQUIREMENTS:
Travel: Ability to travel up to 50% of the time, including overnight stays when required.
Flexibility: A flexible schedule, including early mornings, late nights, and weekends, depending on customer needs.
Work Ethic: Ability to work independently as well as part of a team.
Skills: Strong organizational, problem-solving, and time-management skills.
Basic knowledge of plumbing, electrical work, fabrication, and mathematical concepts is essential.
Physical Requirements: Ability to perform tasks in various environmental conditions and handle equipment safely.
ADDITIONAL REQUIREMENTS:
Valid driver's license and clean driving record. Willingness to complete necessary certifications and safety training as required by the company.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Mobile, Alabama
Posted: 2025-04-08 15:11:46
-
JOB DESCRIPTION
We are seeking experienced Commercial Roofers to join our team.
The skilled Commercial Roofers will be responsible for the maintenance, repairs, and installation of commercial roofing systems.
Benefits:
401K Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Installation of different types of roofing systems such as BUR, EPDM, Single-ply, coatings, and other forms of low-slope roofing systems Safe operation of tools of the trade (hand tools, power tools etc.) Follow OSHA regulations and other regulatory agencies relating to job site safety, demonstrates safe work practices. Work outside in a wide variety of weather conditions and to meet the physical demands of the position, including mobility needed to complete tasks. Climbing and operating on ladders, able to handle at least 50 lbs. Effective communication with foremen, supervisors, and other WTI and Tremco employees
Job Requirements:
Commercial Roofing: All levels; at least 1 year preferred Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical
The hourly rate for applicants in this position generally ranges between $20 and $33.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Benefits: Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
$20.00-$33.00/hora Buscamos techadores comerciales con experiencia para unirse a nuestro equipo.
Los techadores comerciales calificados serán responsables del mantenimiento, las reparaciones y la instalación de los sistemas de techado comerciales.
BENEFICIOS
401KSeguro de saludTiempo libre pagadoReembolso de millasEducación continua
DEBERES Y RESPONSABILIDADES DE EL PUESTO
Instalación de diferentes tipos de sistemas de techado como BUR, EPDM, de una sola capa, revestimientos y otras formas de sistemas de techado de pendiente baja Operación segura de herramientas del oficio (herramientas manuales, herramientas eléctricas, etc.) Siga las regulaciones de OSHA y otras agencias reguladoras relacionadas con la seguridad en el lugar de trabajo, demostrar prácticas de trabajo seguras. Trabaje al aire libre en una amplia variedad de condiciones climáticas y para cumplir con las demandas físicas del puesto, incluida la movilidad necesaria para completar las tareas. Subir y operar en escaleras, capaz de manejar al menos 50 lbs. Comunicación efectiva con capataces, supervisores y otros empleados de WTI y Tremco
REQUISITOS DEL TRABAJO
Techos Comerciales: Todos los niveles; al menos 1 año preferido Medio de transporte confiable Verificación de antecedentes aceptable según los estándares de la empresa Capacidad para pasar una prueba de drogas previa al empleo y examen físico Los solicitantes calificados recibirán consideración para el empleo sin importar su raza, color, religión, origen nacional, sexo, orientación sexual, identidad de género, estado de veterano protegido o discapacidad. Tipo de puesto: Medio tiempo Salario: $20.00 - $33.00 la hora
ABOUT US
Tremco Construction Products Group (CPG) brings together Tremco Incorporated's Commercial Sealants & Waterproofing and Roofing & Building Maintenance operating divisions; Dryvit Systems, Inc.; Nudura Inc.; Willseal; Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada, Inc.
Structures with Tremco CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
Six-sided solutions from Tremco CPG companies deliver demonstrable performance at the lowest possible life-cycle cost, and stop leaks before they happen through ongoing maintenance programs.
Building owners gain the peace of mind that comes with industry-leading system warranties - all from a single source platform.Apply for this ad Online! ....Read more...
Type: Permanent Location: Grand Rapids, Michigan
Posted: 2025-04-08 15:11:45
-
JOB DESCRIPTION
WE WILL TRAIN YOU! NOW HIRING IN MULTIPLE LOCATIONS!
The Commercial Façade Field Technician actively performs and enforces Company safety policy and program to minimize accidents affecting employees, the public, and property.
They will be responsible for attending safety meetings, complying with governmental regulations, reporting, and investigating accidents, and planning site-specific job safety procedures including:
$21-38/hour (not including prevailing wage)
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Attend and understand daily onsite safety brief prior to the start of the WTI project.
Inspect and ensure safety of surroundings, equipment and tools and identify and discuss any safety concerns.
Execution of project tasks with knowledge of expected production rates, ensuring tools and materials are used safely and efficiently to complete the assigned project. Complete the project per the scope or work, design and specification of contract & engineering documents as directed by foreman.
Responsible to aid foreman in tracking and monitoring project inventory. Maintains highest quality on-site customer relations in projecting positive image. Has knowledge/understanding and performs work in compliance with all governmental rules and regulations affecting work sites and employees, i.e.
OSHA, DOT, EEO/Affirmative Action, EPA, etc. Provides management with earliest possible notification of real and potential job problems. Accepts responsibility for the care, custody, and use of company equipment, material, tools, and other assets as assigned by the WTI Commercial Foreman. Understands and executes proper material and equipment usage, maintenance, and storage. Perform any other duty and/or project as required or assigned by the WTI Foreman and/or Commercial Business Manager. Maintains ethical business conduct.
Job Requirements:
Masons & Tuckpointers Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Cold Applied Waterproofing Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $21 and $38.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Austin, Texas
Posted: 2025-04-08 15:11:44
-
JOB DESCRIPTION
Tremco Construction Products Group brings togetherTremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Kettle Operator is responsible for processing Tremco Sealants and/or Roofing products by carefully reading and following the process order card.
The operator is responsible for area readiness to produce which includes safety and collection and preparation of materials like pails, drums, and other raw chemical materials.
One batch is complete the operator will test for quality, adjust as needed to assure specification is met by following written standard operating procedures, and then fill product into specified packaging and palletize pails or drums.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Control or operate chemical processes or systems of machines using control boards, Human Machine Interface (HMI computer touch screen) or semi-automatic equipment.
Draw samples of products, and conduct quality control tests to monitor processing and ensure that standards are met.
Use appropriate scales or measurement devices to add materials to the kettle as specified by batch process orders.
Must be able to read and understand recording instruments, pressure gauges, scales, flow meters, panel lights, and other indicators to verify the conformity of process conditions.
Monitor control settings and make necessary adjustments on equipment.
Accurately record production and downtime via written documentation.
EXPERIENCE:
No prior experience is required.
OTHER SKILLS AND ABILITIES:
Basic Computer Skills required (Windows Familiarity).
Lean and VFM (Visual Factory Management) skills and/or willingness to train.
Ability to manage multiple priorities.
Effective team player, self-motivated, quick learner.
Ability to read, write and comprehend the batch-making processes.
Ability to add, subtract, multiply, and divide into all units of measure, using whole numbers, common fractions, and decimals.Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
Ability to stack 30-pound boxes in high-frequencies.
Ability to lift up to 60-poundpailsusing mechanical assistance and teamwork.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.
Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-04-08 15:11:44
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
Work assigned tasks on a production line making below grade waterproofing material using bentonite and High-Density Polyethylene (HDPE).
Operate and observe machinery used in the production process so that malfunctions can be detected, and supervision can be notified.
Measure material and utilize cutting tools to cut materials to specified length.
Fill pails with manufactured material.
Pack and store manufactured material by rolling materials onto a core, place the roll in a bag, and seal with a wire twist tie.
Shrink wrap or band finished goods.
Rework rejected materials.
Box manufactured accessories for further processing or shipment, following prescribed procedures.
Use a forklift to lift and transfer manufactured materials between work and storage areas.
Sift bentonite that is recycled from floors and rejected materials.
Assist in representing environmental and quality ISO management plans.
Participate in facility projects by performing maintenance and repair work related to the facility.
Utilize, sustain, and audit established Lean Manufacturing processes.
Clean work areas, machinery, and equipment.
EDUCATION REQUIREMENT: High school diploma or general education degree (GED)
EXPERIENCE REQUIREMENT: 1+ Years of related experience
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Basic computer skills required.
Attention to detail - this job requires being careful about detail and thorough in completing work tasks.
Selective attention - the ability to concentrate on a task over a period of time without being distracted.
Effective team player with ability to work independently.
Knowledge of machines and tools, including their uses, repair, and maintenance.
ISO knowledge.
Troubleshooting - ability to identify causes of operating errors and determine how to resolve errors.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The hourly rate/salary range for applicants in this position generally ranges between $15.85 and $18.98 .
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Spearfish, South Dakota
Posted: 2025-04-08 15:11:32
-
JOB DESCRIPTION
Tremco Construction Products Group brings togetherTremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Kettle Operator is responsible for processing Tremco Sealants and/or Roofing products by carefully reading and following the process order card.
The operator is responsible for area readiness to produce which includes safety and collection and preparation of materials like pails, drums, and other raw chemical materials.
One batch is complete the operator will test for quality, adjust as needed to assure specification is met by following written standard operating procedures, and then fill product into specified packaging and palletize pails or drums.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Control or operate chemical processes or systems of machines using control boards, Human Machine Interface (HMI computer touch screen) or semi-automatic equipment.
Draw samples of products, and conduct quality control tests to monitor processing and ensure that standards are met.
Use appropriate scales or measurement devices to add materials to the kettle as specified by batch process orders.
Must be able to read and understand recording instruments, pressure gauges, scales, flow meters, panel lights, and other indicators to verify the conformity of process conditions.
Monitor control settings and make necessary adjustments on equipment.
Accurately record production and downtime via written documentation.
EXPERIENCE:
No prior experience is required.
OTHER SKILLS AND ABILITIES:
Basic Computer Skills required (Windows Familiarity).
Lean and VFM (Visual Factory Management) skills and/or willingness to train.
Ability to manage multiple priorities.
Effective team player, self-motivated, quick learner.
Ability to read, write and comprehend the batch-making processes.
Ability to add, subtract, multiply, and divide into all units of measure, using whole numbers, common fractions, and decimals.Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
Ability to stack 30-pound boxes in high-frequencies.
Ability to lift up to 60-poundpailsusing mechanical assistance and teamwork.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.
Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-04-08 15:11:30
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Field Material Installer applies coating material to new residential construction (homes, condos, and multi-family projects).
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Load materials, tools, and equipment onto the vehicle to be transported to the jobsite.
Install each job using company-approved methods.
Move each job along at a pace to ensure efficiency and quality.
Complete any necessary prep work for proper installation.
Inspect products and materials for defects prior to installation.
Perform quality checks after products are installedto ensure the job is completed toboththe builder's and Tremco's scope.
Ensure thework areas at theshop and jobsite arecleanedand that trash and wasteare properly disposed.
Complete any necessary paperwork as required for each job.
Comply with all company safety policies and procedures.
Keep timesheetsupto date and accurate.
EDUCATION REQUIREMENT:
No formal education requirement.
EXPERIENCE REQUIREMENT:
No formal experience requirement.
CERTIFICATES, LICENSES, REGISTRATIONS:
Valid driver's licenserequired.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Ohio
Posted: 2025-04-08 15:11:26
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
Performs visual and physical inspection, sampling, testing and control of parts, products and raw materials to conform to established specifications, applicable standards and the ISO 9001 Quality System.
ESSENTIAL DUTIES AND RESPONSIBILITIES: Follows the established quality control procedures to ensure all products are manufactured in compliance with IMS, customer specifications, ISO9001:2015 and ISO14000-2015.
Conducts the inspection and testing of raw materials and products, both in process and finished.
Performs color quality control and corrections by interpreting results obtained using appropriate measurements.
Performs measurement checks using tape measure and calibers. Inspects, calibrates and supervises the use of various instrumentation for testing.
Performs data analysis, provides feedback and improvement suggestions to plant personnel, production management, QC Supervisor on all issues concerning quality.
Maintains Quality Control documents and daily reporting of information.
Assists in complaint investigations by performing tests to detect or duplicate issues observed in the field.
Assists in trouble shooting machine functions and production issues as they arise.
Maintains a clean and organized work area.
Performs other duties as assigned.
EDUCATION REQUIREMENT: High school diploma or general education degree (GED) required.
EXPERIENCE REQUIREMENT:
A minimum of 1-2 years experience in a quality control role within a manufacturing environment with oversight of both raw materials and finished goods.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Microsoft Office Suite. Previous experience using enterprise software such as SAP is preferred.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The hourly rate/salary range for applicants in this position generally ranges between $19.00 and $22.87.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: North Kingstown, Rhode Island
Posted: 2025-04-08 15:11:17
-
Field Service Engineer
Northampton
£38,000 - £45,000 (OTE £57,000+) + Progression + Overtime + Training + Vehicle + Door to Door + Company Phone + Pension + ‘ Immediate Start'
Work for an innovative company where you can progress into a managerial position and earn in excess of £57,000 a year.
The role as a Field Service Engineer offers variety, daily challenges, and a great team environment, where no two days are the same.
If you are a hardworking engineer and want to progress to a lead position, whilst being part of a growing company in an evolving industry, this role will be perfect for you.
This company is a leading provider of advanced solutions for the beverage and packaging sectors.
With projects expanding and new business on the horizon, they are looking for a Field Service Engineer to help their clients with the installation and servicing of their processing equipment.
This role is ideal for someone who wants to work hard for a growing company, earn well and wants to progress.
Your Role As A Field Service Engineer Will Include:
Nationwide Field Service (occasional stayway included)
Onsite installation, servicing and maintenance of equipment
Technical support for customers
Project work
As A Field Service Engineer You Will Have:
Experience as a Field Service Engineer or similar
Mechanical and electrical - Manufacturing / Industrial Experience
Full UK driving license
If you are interested in this role, please apply or call Ben Francis on 07537153940.
Key words: Field Service engineer, maintenance engineer, FMCG, Food manufacturing, Production operative, Brewing operator, Rugby, Kettering, Wellingborough, Coventry, Luton, Daventry, Brackley, Birmingham
This vacancy is being advertised by Future Engineering Recruitment Ltd.
The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.
Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted ....Read more...
Type: Permanent Location: Northampton, England
Salary / Rate: £38000 - £45000 per annum + £57000+ Progression + Training
Posted: 2025-04-08 14:13:20
-
Job Title: Mechanical Maintenance EngineerJob Reference: JBTMECHRate - up to £36 per hourShift - Continental Days and nightsJob Type: ContractJob Description - Mechanical Maintenance EngineerMy Client is a manufacturing site looking for a Mechanical Maintenance Engineer with industrial experience.Undertaking day to day reactive maintenance to the site based in berkshireDuties as a Mechanical Maintenance Engineer:Reacting to breakdowns mechanically, fault finding, analysing and continuously improving the site.Work closely with other departments to improve the site.Attend meetings as required, analyse data and find solutions to improve equipment performance whilst ensuring safe working practice and full communications are maintained at all times.Requirements as a Mechanical Maintenance Engineer:A formal qualification in an mechanical engineering subject (apprentice served, NVQ, HNC or equivalent)Strong mechanical experience preferable within a FMCG environment.Knowledge / experience of working with controls, analysing faults and providing solutions.Experience of both reactive and preventative maintenanceGood technical ability relating to automation hardware and software.Strong organisation and communication skills and the ability to work in a multi-disciplined team of varying levels of technical experience.please apply ASAP if you are interested in this Mechanical Maintenance Engineer position ....Read more...
Type: Contract Location: Newbury, England
Salary / Rate: £35 - £36 per hour
Posted: 2025-04-08 13:05:47
-
This Continuous Improvement Coordinator role is working with a European Blue Chip Manufacturing Client and world leading manufacturer looking for a skilled Continuous Improvement Coordinator to join their Manufacturing Team.The company is a market leader, and international manufacturer, with an impressive background of investing in and developing employees at all levels of their business, providing extensive training and career progression opportunities.What's in it for you as Continuous Improvement Coordinator;
A salary of £49,000
Discretionary KPI Bonus
3x Life Assurance in Salary
Monday - Friday 40 hours per week (8am-4pm)
Group Company Pension
Location - Sevenoaks (approximately 7 miles away, with regular train services)
33 days holiday
Genuine career progression and development opportunities
Main Responsibilities of the Continuous Improvement Coordinator.
Deliver CI projects to support the operational and Engineering teams to always improve plant output and quality.
Support the delivery of financial budget aligned with the delivery of KPI's (waste, TOS, efficiency, machine uptime, planned tonnage and accidents).
Leverage and develop site capability on CI tools and techniques (Lean Six-sigma, Kaizen, SMED, 5S, Line-balancing, Centrelines).
Support the maintenance and drive CI in our bakery OEE performance management system.
Support embedding site values as part of CI Strategies.
Demonstrate Health and Safety adherence and cultural behaviours to support site culture.
Essential or desirable skills as the Continuous Improvement Coordinator.
Lean Six-Sigma Green Belt or similar relevant qualification in CI - essential.
Previous experience/qualifications in Manufacturing Excellence.
Clear understanding and application of CI tools and techniques, in particular DMAIC, SMED, 5S, Centre Lining, SIC, Kaizen and Line Balancing.
Experience working with production overall Equipment Effectiveness software systems.
Experience in analysing and presenting reports.
Please apply directly for further information regarding the Continuous Improvement ....Read more...
Type: Permanent Location: Kent, England
Start: ASAP
Salary / Rate: Up to £49000 per annum
Posted: 2025-04-08 11:53:18
-
An excellent opportunity has arisen for an experienced Master Technician / Diagnostic Technician to join a reputable vehicle repair centre.
This full-time, permanent role offers excellent benefits and a salary range of £36,000 - £48,000 with OTE up to £54,600.
As a Master Technician / Diagnostic Technician, you will carry out detailed diagnostics, maintenance, and repairs on high-end vehicles, delivering superior service quality consistently.
You will be responsible for:
* Performing detailed diagnostics and identifying faults accurately.
* Undertaking servicing and repairs according to manufacturer specifications.
* Collaborating closely with Service Advisors and providing clear customer communication.
* Maintaining a tidy, safe, and efficient workspace.
* Completing documentation and records to the required standards.
What we are looking for:
* Previously worked as a Master Technician, Diagnostic Technician, Vehicle Technician, Vehicle Mechanic, Car Technician, Car Mechanic or in a similar role.
* Experience working as a Diagnostic Technician or Master Technician or with Audi, Volkswagen, SEAT, or SKODA vehicles.
* A motivated professional with strong problem-solving skills.
* NVQ Level 3 or equivalent qualification in Vehicle Maintenance.
* Full, clean UK driving licence.
Whats on offer:
* Competitive salary
* Performance-related bonus scheme.
* Company pension scheme.
* Employee discount scheme.
* Regular company events.
* On-site parking facilities.
* Sick pay provision.
* Day shifts only, ensuring work-life balance.
If you are passionate about progressing your automotive career within a supportive and professional environment, apply today.
Important Information: We endeavour to process your personal data in a fair and transparent manner.
In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message.
For more information see our Privacy Policy on our website.
It is important you are aware of your individual rights and the provisions the company has put in place to protect your data.
If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Type: Permanent Location: Birmingham, England
Start:
Duration:
Salary / Rate: £36000 - £48000 Per Annum
Posted: 2025-04-08 10:38:53
-
Maintenance Engineer (Electrical Bias)Leeds | Up to £41500 | Panama Shift Pattern– 12hr Days & NightsKeep the machines running.
Keep the team winning.Our client, a leading global manufacturer, is on the lookout for an experienced Maintenance Engineer (electrically biased) to join their dynamic team in Leeds.Working in a fast-paced, high-output facility, you'll play a key role in keeping production smooth, safe, and efficient.What you’ll be doing:
Diagnosing and fixing electrical/mechanical faults across moulding and assembly equipmentCarrying out TPM and supporting production teamsValidating new machinery and driving automation improvementsLeading fault analysis, repairs, and upgradesUsing QMS tools (Q-Pulse, Microsoft apps) to keep things traceable and auditable
What you’ll need:
NVQ Level 3 / City & Guilds in Electrical EngineeringExperience with hydraulics, pneumatics, TPM & fault diagnosisHands-on background in injection moulding, robotics or rotational assembly (a bonus!)Proactive mindset, solid team player, and safety-first attitude
Why join?
Join a global brand with cutting-edge techShift pattern built for balance (12hr, 4 on 4 off – days & nights)Great team, strong support, and real opportunities to grow
Think you’ve got the tools for the job?Apply now and power up your career in engineering.Aqumen Business Solutions is acting as an Employment Agency in relation to this vacancy. ....Read more...
Type: Permanent Location: LS27, Morley, West Yorkshire, England
Start: ASAP
Salary / Rate: £39.5k - 41.5k per year + Bonus
Posted: 2025-04-08 09:54:13
-
IT Support Engineer
Location: London (office based)
Salary: Up to £40,000
About the Company:
A well established, luxury travel services company are looking for a IT Support Engineer to join the business on a permanent basis.
You'll be solely responsible for their whole IT infrastructure spanning across Servers, Network infrastructure, business applications and so on whilst having the support of a 3rd party Managed Services Provider if needed.
You'll be an integral part of the business providing strategic input from an IT perspective, suggesting improvements/projects which could benefit the efficiency of the business.
Key Responsibilities:
Managing and optimizing the company's IT infrastructure and network systems.
Implementing robust security measures to safeguard systems and sensitive data.
Providing technical support and promptly resolving IT-related issues.
Collaborating cross-functionally to enhance system efficiency and reliability.
Identifying opportunities for system improvements and upgrades.
Requirements:
Proven experience in a IT Support role or similar capacity.
(Ideally 2nd line)
Strong proficiency in IT systems, networks, and security protocols.
(VMWare, Office 365, Windows Server, MS/MAC OS, AzureAD, R&S, Firewalls, LAN, WAN etc.)
Skills in system configuration, troubleshooting, and maintenance.
Excellent problem-solving abilities with acute attention to detail.
Ability to work both independently and as part of a collaborative team.
What's in it for you:
Opportunity to join a Luxury Travel Services company who provide high end leisure and corporate travel.
Competitive salary of up to £40,000, reflective of experience and skills.
Prospects for career growth and professional development.
A supportive and inclusive work environment that values your expertise.
This position is an excellent opportunity for a proactive Systems Administrator ready to make a significant impact within a company experiencing growth.
....Read more...
Type: Permanent Location: London, England
Salary / Rate: Up to £40000 per annum
Posted: 2025-04-08 09:20:10
-
Site Service Engineer
Manufacturing Industry
Day Shifts - Cheddar - BS27
£28k-£36K Per Annum Depending on Experience
On-Call Work
Are you a hands-on engineer looking for a varied and rewarding role? My client is a leading provider of electro-mechanical services and is looking for a Site Service Engineer to join our team in Cheddar.
This role offers a fantastic opportunity to work on-site with clients across multiple industries, carrying out repairs, maintenance, and servicing of rotating equipment.
Commutable from Cheddar, Draycott, Axbridge, Wedmore, Badgworth and Winscombe.
As a Site Service Engineer, you will be responsible for diagnosing faults, carrying out on-site repairs, and performing maintenance on a variety of electro-mechanical equipment.
This role will involve travel to customer sites, providing excellent service and technical expertise.
The Role: Site Service Engineer
- Perform on-site repairs and servicing of motors, pumps, gearboxes, and other rotating equipment.
- Diagnose faults and carry out mechanical and electrical maintenance.
- Work closely with customers to ensure minimal downtime and maximum efficiency.
- Assist with installations, removals, and commissioning of new equipment.
- Maintain accurate service records and ensure all work complies with health and safety standards.
Minimum Skills / Experience Required: Site Service Engineer
- Experience in mechanical or electrical engineering, ideally in a field-based role.
- Strong knowledge of rotating equipment such as motors, pumps, and gearboxes.
- Ability to diagnose and repair faults on-site efficiently.
- Full UK driving license (essential).
- A proactive, problem-solving attitude with excellent customer service skills.
The Package: Site Service Engineer
- Base Salary £13.50-£17.50 per hour (negotiable depending on experience)
- Day shifts 8am-5pm Mon-Fri 40 hour week
- Over time and on-call work opportunities
- Company vehicle provided for on-call jobs
- 28 days holiday
- Pension scheme
Interested? To apply for this Site Service Engineerposition, here are your two options:
1.
"This is the job for me! When can I start?" - Call 0116 2545411 now and lets talk through your experience.
Ask for Nilam between 8.30am - 5.30pm.
2.
"I think I'm right for this position, but I'm not sure I have enough to get an interview" - Click "apply now" so I can read your CV and let you know
PPDEL ....Read more...
Type: Permanent Location: Cheddar,England
Start: 08/04/2025
Salary / Rate: £28000 - £36000 per annum, Benefits: Pension scheme. Overtime.
Posted: 2025-04-08 08:29:07
-
An exciting opportunity has arisen for a Lead Plant Technicianwith 5 years experience to join a well-established company, delivering specialist equipment solutions across telecoms, utilities, and infrastructure sectors worldwide.
This full-time role offers excellent benefits and a competitive salary.
As a Lead Plant Technician, you will be providing first-line technical support, managing plant operations, and deputising in the absence of the LPG Operations Manager to ensure smooth departmental functioning.
You will be responsible for:
* Assisting operational activities, primarily reporting to the LPG Operations Manager.
* Acting as Site Controller in the absence of the LPG Manager.
* Preparing routine and non-routine operational procedures for approval.
* Providing technical support to colleagues onsite.
* Completing accurate documentation and records.
* Supporting planning and managing workload effectively.
* Conducting LPG ship discharge operations and supervising jetty operators.
* Managing the Plant team in the absence of the LPG Manager during holidays or sick leave.
What we are looking for:
* Previously worked as a LPG Plant Technician, Plant Operations Technician, Plant Maintenance Technician, Gas Plant Technician, LPG Operations Technician, Plant Supervisor, Plant Technician, Plant Controller, Gas Operations Technician, LPG Site Technician, Plant Team Leader, Process Technician, Technical Plant Operator, Control Room Technician, Plant Engineer or in a similar role.
* At least 5 years experience in a gas or similar industry.
* Experience with emergency processes within mains, LPG, or plant operations.
* IOSH Managing Safety certification.
* Understanding of plant maintenance and operations.
* Strong technical, operational, and process knowledge relevant to gas and LPG operations.
* Familiarity with Health & Safety and Environmental legislation.
Apply now for this exceptional Lead Plant Technicia opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner.
In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message.
For more information see our Privacy Policy on our website.
It is important you are aware of your individual rights and the provisions the company has put in place to protect your data.
If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Type: Permanent Location: Jersey, England
Start:
Duration:
Salary / Rate:
Posted: 2025-04-07 17:51:55
-
Our client is a leading engineering business that has been established for over half a century providing mechanical handling solutions to many industries across the globe.They are looking to strengthen their projects & design team by recruiting an additional project engineer / design engineer to their successful team.If you have previous design and or project experience within materials handling equipment and are looking to join a highly stable company who can offer a competitive salary then apply now for immediate consideration.Purpose of Job: Responsible for the engineering and technical disciplines needed to complete a project.Project Engineer / Design Engineer - Core Skillset, System layout experience, SolidWorks + AutoCAD (GA, Design & Detailing), Experience with special purpose machinery, ideally conveyors, Sheet metal, structural and fabrication design, Solid knowledge of material flow, Project Management, Managing costs, BOMs, ERP/ MRP systems, Prior experience with recycling equipment ideal but not essentialDesign Activities, To produce general arrangement drawings in 3D and/or 2D for the Projects and Sales departments.
This involves the full engineering integration of the company's inhouse products (conveyors, structures and ancillary equipment) with that of specialist third party manufacturers to create a tailored plant layout within the space available without compromising material flow., To work with the Sales team or the Projects team to optimise a layout until it reaches the point of Design Freeze at which the customer signs off the GA to allow full project launch., To ensure design quality, cost, time and standardisation are appropriately considered throughout the design and delivery process, To use SolidWorks and AutoCAD as the main design platforms for the above.Project Engineer / Design Engineer - Project Execution, Be hands-on, pro-active and own the engineering development of a project from initial concept through design, release, manufacturing, testing and commissioning., To model and detail detailed in-house products through to full release to the shopfloor producing detailed manufacturing drawings from 3D models (SolidWorks).
This will involve using the Company's standards library and customising if necessary., To create and release BOM's (Bill of Materials) within the company MRP system., To produce and maintain technical documents for the Engineering and Sales departments, operating manuals, H&S, maintenance etc., To define product technical specifications, both internal design standards and legislative/mandated industry standards., To attend site to take or check measurements, To produce technical specifications for in-house products or those we purchase., To challenge existing designs and manufacturing methods for the benefit of the Company and the customer., To work closely with the Manufacturing department, Project Engineers and Sales team to ensure designed products meet the overall requirements of the business, To provide full engineering support on the project including at site whenever needed and particularly over Installation, Commissioning and Testing., To give full support to the Project Manager over the course of the project and attend site as necessary to ensure the plant/machine is successfully commissioned and customer is delighted.Assessment and Improvement Duties, Assess which sales and/or project layouts worked well, and which did not in order to improve the design process for next time., Work on the continuous improvement of existing products and processes.
, Make any necessary adjustments to designs to reduce costs wherever possible., To analyse the costings of our proposals and projects in comparison to our competitors' Proposals to unlock the differences between what is being offered in order help the Company's Sales department become more effective with its own proposals., To remove cost from our proposals by working continuously toward smarter solutions, tighter designs, alternative third-party suppliers and new processing concepts.
To add as much functionality to every design, even if the extra functionality is included as priced extras.
Our aim is for the most efficient designs with best functionality at the most cost-effective prices., To appraise the Sales proposals to ensure the quality of our designs, offers and our approach is always at the highest possible level, visually appealing as possible, clear as possible in its concept to ensure our customers will value it.Experience & Qualifications, Experience as a Project Engineer / Design Engineer, Experience in sheet metal and fabricated product design is essential, Experience in special purpose machinery design, desirable, Experience in recycling and associated material flow, Proficient use of SolidWorks 2022 & AutoCAD 2D, Basic knowledge of electrical engineering, Creative and innovative with a desire to improve continuously, Excellent problem-solving skills, Able to efficiently communicate both written and oral, Confident decision-making ability, HNC or equivalent within mechanical / manufacturing engineering subjectProject Engineer previous suitable job titles: Project Design Engineer, Design Engineer, Draughtsperson, Draughtsman, Draughtswoman, Draughtsperson, Design Project Engineer, Detailer, Mechanical Design Engineer, CAD Draughtsperson, CAD Drafter, Project Manager, Mechanical Project Engineer, Design Technician, Mechanical Design TechnicianPlease apply ASAP ....Read more...
Type: Permanent Location: Kettering, England
Start: ASAP
Salary / Rate: £40000.00 - £45000.00 per annum + DOE + Bens
Posted: 2025-04-07 17:50:09
-
An exciting opportunity has arisen for a Gas Engineer to join a well-established company, delivering specialist equipment solutions across telecoms, utilities, and infrastructure sectors worldwide.
This full-time role offers excellent benefits and a competitive salary.
As a Gas Engineer, you will be delivering safe and efficient gas services across a wide customer base, both indoors and externally, supporting key operational objectives.
You will be responsible for:
* Responding to reported gas emergencies and ensuring compliance with procedural standards.
* Supporting maintenance and repair of gas networks and LPG supply systems.
* Installing, servicing, and fault-finding gas appliances and installations per manufacturer guidance.
* Supervising and mentoring apprentices and trainees in practical settings.
* Managing van stock and consumables responsibly.
* Accurately documenting completed work on paper or digital systems.
* Providing support to customers through service visits and follow-ups.
What we are looking for:
* Previously worked as a Gas Engineer, Heating Engineer, Service Engineer, Boiler Engineer, LPG Engineer, Gas Installation Engineer, Gas Service Engineer, or in a similar role.
* Ideally have experience in domestic gas services.
* Knowledge of gas regulations, codes of practice, and unsafe situations procedures.
* Practical understanding of both downstream and LPG systems maintenance.
Apply now for this exceptional opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner.
In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message.
For more information see our Privacy Policy on our website.
It is important you are aware of your individual rights and the provisions the company has put in place to protect your data.
If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Type: Permanent Location: Guernsey, England
Start:
Duration:
Salary / Rate:
Posted: 2025-04-07 17:14:40
