-
Field Service Engineer
Leeds
£30,000 - £34,000 Basic + Overtime (Earnings of £45,000+) + Training + Progression + Vehicle + Mobile + Pension
Work a field service engineer role for the best regarded and most successful company in their industry, whilst getting specialist training and earning over £45,000 with overtime.
You'll get recognition and be rewarded for your work with a company that will treat you as more than just another number.
This company are specialists in the repair, maintenance and calibration of a vast range of mechanical machinery and equipment used in the automotive industry UK wide.
Due to continued growth and an overflowing order book, they are looking for a field service engineer to join their highly experienced team.
You'll have opportunity to develop your skills through continuous training and earn over £45,000 with consistent overtime.
Your Role As Field Service Engineer Will Include:
* Field service engineer role - Product training given
* Mechanical servicing of MOT equipment / Garage equipment
* Some electrical fault finding
* Regional cover field service engineer role - No stay away required!
As the Successful Field Service Engineer You'll Have:
* Good mechanical engineering knowledge and skills - any garage equipment experience is a benefit.
* Background as a mechanical / field service engineer / technician (or similar)
* Ex-forces engineers welcomed
* Live around the Leeds / Bradford area and be willing to travel as a field service engineer
Please apply or contact Sam Eastgate for immediate consideration
Keywords: Field service engineer, service engineer, engineer, mobile engineer, field engineer, mechanic, field service, mechanical, electrical, calibration, garage equipment, REME, Army, Ex forces, Navy, RAF, Leeds, Bradford, Yorkshire, Wakefield, Huddersfield.
This vacancy is being advertised by Future Engineering Recruitment Ltd.
The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.
Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.
....Read more...
Type: Permanent Location: Leeds, England
Start: ASAP
Duration: PERM
Salary / Rate: £30000 - £34000 per annum + Overtime (£45,000 OTE) + Regular Training
Posted: 2025-05-19 16:25:02
-
Field Service Engineer
Glasgow
£30,000 - £34,000 Basic + Overtime (Earnings of £45,000+) + Regular Training + Progression + Vehicle + Mobile + Pension
Work a field service engineer role for the best regarded and most successful company in their industry, whilst getting specialist training and earning over £45,000 with overtime.
You'll get recognition and be rewarded for your work with a company that will treat you as more than just another number.
This company are specialists in the repair, maintenance and calibration of a vast range of mechanical machinery and equipment used in the automotive industry UK wide.
Due to continued growth and an overflowing order book, they are looking for a field service engineer to join their highly experienced team.
You'll have opportunity to develop your skills through continuous training and earn over £45,000 with consistent overtime.
Your Role As Field Service Engineer Will Include:
* Field service engineer role - Product training given
* Mechanical servicing of MOT equipment / Garage equipment - including Gas and Smoke analysers and lifts etc.
* Electrical fault finding
* Calibration work required on a variety of company equipment
* Regional cover field service engineer role - No stay away required!
As the Successful Field Service Engineer You'll Have:
* Good mechanical engineering knowledge and skills - any garage equipment experience is a benefit.
* Background as a mechanical / field service engineer / technician (or similar)
* Experience with / competent using PC systems
* Ex-forces engineers welcomed
* Live around the Glasgow area and be willing to travel as a field service engineer
Please apply or contact Sam Eastgate for immediate consideration
Keywords: Field service engineer, service engineer, engineer, mobile engineer, field engineer, mechanic, field service, mechanical, electrical, calibration, garage equipment, REME, Army, Ex forces, Navy, RAF, Glasgow, Falkirk, Central Belt, Airdrie.
This vacancy is being advertised by Future Engineering Recruitment Ltd.
The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.
Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.
....Read more...
Type: Permanent Location: Glasgow, Scotland
Start: ASAP
Duration: PERM
Salary / Rate: £30000 - £34000 per annum + Overtime (£45,000 OTE) + Regular Training
Posted: 2025-05-19 16:16:10
-
Field Service Engineer
Dundee
£30,000 - £34,000 Basic + Overtime (Earnings of £45,000+) + Regular Training + Progression + Vehicle + Mobile + Pension
Work a field service engineer role for the best regarded and most successful company in their industry, whilst getting specialist training and earning over £45,000 with overtime.
You'll get recognition and be rewarded for your work with a company that will treat you as more than just another number.
This company are specialists in the repair, maintenance and calibration of a vast range of mechanical machinery and equipment used in the automotive industry UK wide.
Due to continued growth and an overflowing order book, they are looking for a field service engineer to join their highly experienced team.
You'll have opportunity to develop your skills through continuous training and earn over £45,000 with consistent overtime.
Your Role As Field Service Engineer Will Include:
* Field service engineer role - Product training given
* Mechanical servicing of MOT equipment / Garage equipment
* Electrical fault finding
* Regional cover field service engineer role - No stay away required!
As the Successful Field Service Engineer You'll Have:
* Good mechanical engineering knowledge and skills - any garage equipment experience is a benefit.
* Background as a mechanical / field service engineer / technician (or similar)
* Ex-forces engineers welcomed
* Live around the Dundee area and be willing to travel as a field service engineer
Please apply or contact Sam Eastgate for immediate consideration
Keywords: Field service engineer, service engineer, engineer, mobile engineer, field engineer, mechanic, field service, mechanical, electrical, calibration, garage equipment, REME, Army, Ex forces, Navy, RAF, Dundee, Scotland.
This vacancy is being advertised by Future Engineering Recruitment Ltd.
The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.
Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.
....Read more...
Type: Permanent Location: Dundee, Scotland
Start: ASAP
Duration: PERM
Salary / Rate: £30000 - £34000 per annum + Overtime (£45,000 OTE) + Regular Training
Posted: 2025-05-19 16:08:44
-
Your responsibility will be to ensure that our automotive products meet the quality standards set by the company.
This involves thorough validation of their functionality, performance, and reliability.
Additionally, you'll be entrusted with the creation and maintenance of technical documentation, test plans, and tools.
Requirements:
Possession of an engineering degree or equivalent qualification.
Familiarity with hardware testing equipment like oscilloscopes, logic analysers, and mustimeters.
Familiarity with various automotive testing methodologies, tools, such as CAD, MATLAB, Simulink, Python, Power BI.
Experience in software testing techniques, including manual and automated testing.
You must have full clean UK driving license
Your role involves:
Active engagement in all stages of product testing, from research and development to final product launch.
Effective prioritization and management of tasks to meet project deadlines.
Utilisation and development of software, firmware, and hardware testing tools tailored for comprehensive automotive product testing. ....Read more...
Type: Permanent Location: Buckingham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £28000 - £32000 Per Annum None
Posted: 2025-05-19 15:14:19
-
Field Service Engineer
Birmingham
£32,000 - £40,000 basic + Door to Door + Family feel + Job satisfaction + Company Vehicle WITH Personal use + Training + Work life balance + Immediate start
Solidify your career now as a field service engineer (pumps) with a stable company where you will be appreciated for the long term.
Join their supportive team and enjoy a great package, including full training to do your job to the best of your ability.
You will have everyday job satisfaction working with a great supportive team and training to get the job done.
This company operates in the fire safety solution industry and specializes in high quality services of fire pumps and sprinkler systems.
They are currently expanding so they now require a field service engineer to join their tight knit team and help contribute to their consistent workload.
Your Role as a field service engineer will include:
*Service, maintenance and installations of fire pumps
*Full training and support
*Field service role around the Midlands area
The successful field service engineer will have:
* A mechanical engineering background (car / HGV mechanic wanted to get into pumps desired)
* Experience with diesel engines is a must
* Full driving license
* Ability to commute to the Midlands area
Please apply and call Georgia on 07458163040 for immediate consideration.Key words: field service engineer, pump engineer, car mechanic, HGV technician, mechanic, plant engineer, Coventry, Birmingham, Manchester, Cheshire, Wolverhampton, Nottingham, Leicestershire, Worcester, Staffordshire, ShropshireThis vacancy is being advertised by Future Engineering Recruitment Ltd.
The services of Future Engineering Recruitment Ltd are that of an Employment Agency. Please visit our website at futureengineer.co.uk to view other positions we are currently handling. Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.
Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed. We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted. ....Read more...
Type: Permanent Location: Birmingham, England
Start: ASAP
Salary / Rate: £32000 - £40000 per annum + Door to Door + Family feel + Package
Posted: 2025-05-19 14:52:42
-
The Job Heavy Commercial Refrigeration Engineer
The Company:
Our client is the No.1 market leader in Industrial & Commercial Refrigeration.
Strong Global presence with multi-million pound contracts with some of the world’s largest organisations
Great opportunities to progress within the organisation.
Largest refrigeration company in the UK & Europe with exceptional training & development based overseas as well as in the UK.
Benefits of the Heavy Commercial Refrigeration Engineer
£40k-£50k basic salary
Extensive overtime (OTE £60k-£75k)
Company Van
Smartphone
Laptop
25 Days Holiday + bank holidays
Pension Contribution
Healthcare
39 hour working week
Overtime available (1.5x – x2 time hourly rates)
The Role of the Heavy Commercial Refrigeration Engineer
This is an opportunity for a hungry, career minded individual to undertake Service, Repair, Maintenance and Commissioning on all Heavy Commercial Refrigeration units including multi-compressor packages, food factory process cooling, blast cooling and spiral freezer systems as well as F-Gas equipment.
You will be working from home, autonomously, occasionally in pairs for larger jobs, covering a territory in the South East of England including Middlesex, Surrey, Hertfordshire, Buckinghamshire and London.
Undertaking work for customers within industries & applications such as Food & Beverages, Production, Pharmaceutical etc…
Majority of work will be planned in advance, although the Engineer will be required to be on-call 1 week in 6 on a reactive/call-out basis (including Weekends).
£40k-£50k basic salary + Extensive overtime (OTE £60-£75k), Company Van, Smartphone, Laptop, 25 Days Holiday + bank holidays, Pension Contribution, Healthcare, 39 hour working week, Overtime available (1.5x – x2 time)
The Ideal Person for the Heavy Commercial Refrigeration Engineer
Hands-on servicing experience within Industrial or Commercial Refrigeration .
Previous experience working in Supermarket Refrigeration or Compressor Systems.
F-Gas Certification is essential.
Experience with Ammonia, CO2 or Hydrocarbon would be beneficial.
Excellent communication skills with the ability to work under minimal supervision .
Solution focussed, with the ability to work under pressure and resolve tricky scenarios.
Hungry and Money Motivated with a strong hard working ethic.
Full UK Driving Licence .
If you think the role of Heavy Commercial Refrigeration Engineer is for you, apply now!
Consultant: Bjorn Johnson
Email: bjorn@otrsales.co.uk
Tel no.
0208 397 4114
Candidates must be eligible to work and live in the UK.
About On Target
At On Target, we specialise in sales, technical and commercial jobs in the Engineering, Construction, Building Services, Medical & Scientific, and Commercial & Industrial Solutions sectors, enabling our consultants to become experts in their market sector.
We place all levels of personnel, up to Director across the UK and internationally. ....Read more...
Type: Permanent Location: Wembley, London, Slough, Watford, Wimbledon, England
Start: ASAP
Duration: Full-Time
Salary / Rate: £40000 - £50000 Per Annum Excellent Benefits
Posted: 2025-05-19 14:29:36
-
Field Service Engineer Bromsgrove£30,000 to £38,000 Basic + Variety + Job For Life + Recession Proof Industry + Very Low Staff Turnover + Package Be part of a highly skilled team for a long standing and well respected company in their industry.
Enjoy working as a field service engineer for an established business where you'll be looked after, treated as more than just another number and have a job for life!This company specialises in maintenance and installation of various types of material handling equipment across the UK.
Due to continued growth and expansion they are looking for a field service engineer to join their existing team.
Thrive working for a company who trusts and respects their staff where you'll truly feel part of a team.Your Role As Field Service Engineer Will Include:
* Home based field service engineer role covering UK wide
* Carry out service and breakdowns of material handling and lifting equipment (Mechanical engineering)
* Occasionally assist the installation team when needed.
* Some stay away / overnight stays (roughly 5 nights a month)The Successful Field Service Engineer Will Need To Have:
* Experience as an installation / maintenance / mechanical / field service engineer or similar
* Experience with material handling / lifting / mechanical equipment or machinery.
* Must have a UK driving licence
* Live around the Bromsgrove area or nearby and happy to travel as a field service engineerPlease apply or contact Sam Eastgate for immediate considerationKeywords: field service engineer, field installation engineer, installation engineer, service engineer, field engineer, mobile engineer, material handling, lifting, LEEA, mechanical, mechanical engineer, Bromsgrove, Birmingham, West Midlands, Redditch, Kidderminster.
This vacancy is being advertised by Future Engineering Recruitment Ltd.
The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Please visit our website to view other positions we are currently handling.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.
Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
....Read more...
Type: Permanent Location: Bromsgrove, England
Start: ASAP
Duration: PERM
Salary / Rate: £30000 - £38000 per annum + + Variety + Job For Life
Posted: 2025-05-19 12:07:49
-
33 days paid holidays, pay rate is £17.24 per hour, Permanent Position, OT available, Pension Contribution of up to 5% , 4 Day working week, well established market leading manufacturing company
We welcome applications from a Fabricator Welder background, vehicle building, vehicle maintenance, vehicle manufacture and vehicle repair background
Commutable from Worksop, Sheffield, Mansfield, Chesterfield, Rotherham and Doncaster
Strong fabrication and welding skills with a recognised vocational qualification.
2 years' experience working in a Manufacturing Engineering or commercial vehicle industry must be able to read technical drawings and recognise welding symbols.
Used to working to tight delivery timescales
Duties of the Fabricator Welder:
Carry out fabrication of parts, components and chassis' of brand new vehicles
MIG Welding
Work to fabrication drawings
Self inspect of own work
Working with fabrication machinery
Work with Mild Steel & Stainless steel (Aluminium a bonus but not essential)
What we need from you for this Fabricator Welder role:
Adhere to H&S Guidelines
Previous experience in a vehicle building environment
Ability to work to fabrication drawings and understand fabrication and welding symbols on diagrams
Self starter
To be comfortable filling in and completing job sheets
To work with correct PPE and ensure all equipment is used correctly and safely
Benefits of the Fabricator Welder role;
33 days paid holiday
Permanent Position
OT available
Pension Contribution of up to 5%
4 Day working week
Well established market leading manufacturing company
If you are interested in the Fabricator Welder position, or for a confidential chat, please contact Joe Reid at E3 Recruitment. ....Read more...
Type: Permanent Location: Worksop, England
Start: ASAP
Salary / Rate: Up to £36000 per annum
Posted: 2025-05-18 18:00:06
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
The Construction Manager Junior Associate position will train in many departments within Roofing and WTI while engaged in a degree seeking program through RISE.
The following areas will be included in training as well as any others deemed appropriate: WTI Field - WTI Field Resources to learn installation of different types of roofing systems such as BUR, EPDM, Single-ply, coatings, and other forms of low-slope roofing systems, as well as safe operations of tools of the trade.
This position requires hands on; roof or construction site activity. General Contracting - learn and assist in project management duties including but not limited to managing all projects (including GC and larger-scale P&R, TremCares, etc), participating in all proposals, specifications, price estimates, schedules, and sales efforts as they affect the aforementioned projects.
Sales & Service Support - Report database management and QC related activities, warranty adjustment, leak tracking, customer service, project administration, product training activities, etc. The Construction Manager Junior Associate will be required to apply and take courses working towards a degree in Construction Management through the WTI partnership with The University of Akron, must maintain a minimum of 2.0 GPA, and will work through the Junior Associate curriculum which includes training in the following: OLI QC, superintendent training, estimating, spec writing, CM admin support, PR/Inspection field services.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Installation, maintenance, and repair of different types of roofing systems such as BUR, EPDM, Single-ply, coatings, and other forms of low-slope roofing systems Safe operation of tools of the trade (hand tools, power tools etc.) Follow OSHA regulations and other regulatory agencies relating to job site safety, demonstrates safe work practices. Work outside in a wide variety of weather conditions and to meet the physical demands of the position, including mobility needed to complete tasks. Climbing and operating on ladders, able to handle at least 50 lbs. Effective communication with foremen, supervisors, and other WTI and Tremco employees Be responsible for contributing to proposals and specifications GC project administration and tracking activities Conceptual Phase (estimates & schedules) Program Planning Phase Design Phase Conduct Prebid Construction Phase Conduct Pre con Effective Close-out Cost Estimates and schedules Use of eBuilder for all project documentation per policy manual Analyze for project cost / budget variance & profitability Understanding of subcontractor agreement and corrective measures of notification to subcontractor per the executed agreement Any other activities to support the training and development within the organization
EDUCATION & EXPERIENCE
High school diploma or general education degree (GED) No prior professional experience or training required. (Currently Earning): Degree in Construction Management, Construction building Engineering, Construction Technology, Project Management or Industrial
The hourly rate for applicants in this position generally ranges between $20 and $33.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2025-05-18 15:10:20
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
The Construction Manager Junior Associate position will train in many departments within Roofing and WTI while engaged in a degree seeking program through RISE.
The following areas will be included in training as well as any others deemed appropriate: WTI Field - WTI Field Resources to learn installation of different types of roofing systems such as BUR, EPDM, Single-ply, coatings, and other forms of low-slope roofing systems, as well as safe operations of tools of the trade.
This position requires hands on; roof or construction site activity. General Contracting - learn and assist in project management duties including but not limited to managing all projects (including GC and larger-scale P&R, TremCares, etc), participating in all proposals, specifications, price estimates, schedules, and sales efforts as they affect the aforementioned projects.
Sales & Service Support - Report database management and QC related activities, warranty adjustment, leak tracking, customer service, project administration, product training activities, etc. The Construction Manager Junior Associate will be required to apply and take courses working towards a degree in Construction Management through the WTI partnership with The University of Akron, must maintain a minimum of 2.0 GPA, and will work through the Junior Associate curriculum which includes training in the following: OLI QC, superintendent training, estimating, spec writing, CM admin support, PR/Inspection field services.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Installation, maintenance, and repair of different types of roofing systems such as BUR, EPDM, Single-ply, coatings, and other forms of low-slope roofing systems Safe operation of tools of the trade (hand tools, power tools etc.) Follow OSHA regulations and other regulatory agencies relating to job site safety, demonstrates safe work practices. Work outside in a wide variety of weather conditions and to meet the physical demands of the position, including mobility needed to complete tasks. Climbing and operating on ladders, able to handle at least 50 lbs. Effective communication with foremen, supervisors, and other WTI and Tremco employees Be responsible for contributing to proposals and specifications GC project administration and tracking activities Conceptual Phase (estimates & schedules) Program Planning Phase Design Phase Conduct Prebid Construction Phase Conduct Pre con Effective Close-out Cost Estimates and schedules Use of eBuilder for all project documentation per policy manual Analyze for project cost / budget variance & profitability Understanding of subcontractor agreement and corrective measures of notification to subcontractor per the executed agreement Any other activities to support the training and development within the organization
EDUCATION & EXPERIENCE
High school diploma or general education degree (GED) No prior professional experience or training required. (Currently Earning): Degree in Construction Management, Construction building Engineering, Construction Technology, Project Management or Industrial
The hourly rate for applicants in this position generally ranges between $20 and $33.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2025-05-18 15:10:15
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Field Technical Representative ensures proper application of Tremco CPG Modulite products in accordance with all company and industry guidelines by providing on-site application and problem resolution.
Modulite has everything you need for the construction of 2D panelized walls systems, 3D modular units and prefabricated building components.
We manufacture exterior wall panels and supply materials to modular manufacturers and panel fabricators, such as: Sealants & adhesives Air and weather barriers Spray foams Firestopping Continuous insulation & exterior cladding
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Provide independent support for primary territory product lines.
Recommend products and solutions outside of primary product lines with occasional direction.
Provide site support by performing general and complex product applications.
Perform substrate analysis using specialty equipment.
Keep up-to-date technically on practical procedures, specialized techniques to apply new knowledge within the field.
Provide field support by collecting data for project or product specific testing and interpreting results.
Recommend application policies within technical literature.
Coordinate 3rd party testing certification/approvals Provide live and/or web-based training for internal staff and/or external customers.
Create instructional hands-on demonstrations in a classroom, distributor locations, or job site settings showing application of products.
Exercise clear and confident communication of product lines and construction practices during presentation delivery.
Use relevant information and individual judgment to determine whether designs or applications comply with local codes, industry standards, and regulations.
EDUCATION:
Bachelor's Degree in Science, Engineering, Construction, or similar preferred.
and 2-4 years of construction or industry experience OR Minimum High School Diploma or GED with 5 years of construction or industry experience
EXPERIENCE: Minimum 2 years of related experience and/or training with the application of EIFS / Plastering Metal or exterior wall panels experience Active listening and attention to detail Building and construction knowledge of materials, methods, and the tools involved in the construction or restoration of buildings or other structures Knowledge of product application Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models.
Knowledge of chemical composition, structure, and properties of substances and of the chemical processes and transformations they undergo.
This includes chemistry of current and future products and systems.
Customer Service skills, including needs assessments and evaluation of customer satisfaction.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:. Excellent written and verbal communication skills Effective team player Proficient in Microsoft Office (Word, Excel, Outlook) Proven ability to understand, use, and manage your own emotions in positive ways to relieve stress, communicate effectively, empathize with others, overcome challenges and diffuse conflict. Demonstrates self-awareness and emotional self-control through adaptability, achievement orientation, and a positive outlook. Accepts and utilizes feedback effectively. Reads an audience and adjust style and approach accordingly. Strong presentations skills Excellent interpersonal and organizational skills
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally starts at $80K and goes up based on experience.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran statusApply for this ad Online! ....Read more...
Type: Permanent Location: Chicago, Illinois
Posted: 2025-05-18 15:10:06
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Field Technical Representative ensures proper application of Tremco CPG Modulite products in accordance with all company and industry guidelines by providing on-site application and problem resolution.
Modulite has everything you need for the construction of 2D panelized walls systems, 3D modular units and prefabricated building components.
We manufacture exterior wall panels and supply materials to modular manufacturers and panel fabricators, such as: Sealants & adhesives Air and weather barriers Spray foams Firestopping Continuous insulation & exterior cladding
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Provide independent support for primary territory product lines.
Recommend products and solutions outside of primary product lines with occasional direction.
Provide site support by performing general and complex product applications.
Perform substrate analysis using specialty equipment.
Keep up-to-date technically on practical procedures, specialized techniques to apply new knowledge within the field.
Provide field support by collecting data for project or product specific testing and interpreting results.
Recommend application policies within technical literature.
Coordinate 3rd party testing certification/approvals Provide live and/or web-based training for internal staff and/or external customers.
Create instructional hands-on demonstrations in a classroom, distributor locations, or job site settings showing application of products.
Exercise clear and confident communication of product lines and construction practices during presentation delivery.
Use relevant information and individual judgment to determine whether designs or applications comply with local codes, industry standards, and regulations.
EDUCATION:
Bachelor's Degree in Science, Engineering, Construction, or similar preferred.
and 2-4 years of construction or industry experience OR Minimum High School Diploma or GED with 5 years of construction or industry experience
EXPERIENCE: Minimum 2 years of related experience and/or training with the application of EIFS / Plastering Metal or exterior wall panels experience Active listening and attention to detail Building and construction knowledge of materials, methods, and the tools involved in the construction or restoration of buildings or other structures Knowledge of product application Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models.
Knowledge of chemical composition, structure, and properties of substances and of the chemical processes and transformations they undergo.
This includes chemistry of current and future products and systems.
Customer Service skills, including needs assessments and evaluation of customer satisfaction.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:. Excellent written and verbal communication skills Effective team player Proficient in Microsoft Office (Word, Excel, Outlook) Proven ability to understand, use, and manage your own emotions in positive ways to relieve stress, communicate effectively, empathize with others, overcome challenges and diffuse conflict. Demonstrates self-awareness and emotional self-control through adaptability, achievement orientation, and a positive outlook. Accepts and utilizes feedback effectively. Reads an audience and adjust style and approach accordingly. Strong presentations skills Excellent interpersonal and organizational skills
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally starts at $80K and goes up based on experience.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran statusApply for this ad Online! ....Read more...
Type: Permanent Location: Chicago, Illinois
Posted: 2025-05-18 15:10:03
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: The Engineer's role is viewed as an extension of management.
Responsibilities are broad and include safety, product quality, process control, productivity improvement, and development of a LEAN culture.
The Engineer is expected to spend a significant amount of time on the floor.
ESSENTIAL DUTIES & RESPONSIBILITIES:
Safety Assume a leadership position at the facility in partnership with the shift supervisors.
Activities include resolution and communication regarding safety issues.
Execute on scheduled PHA's and JSA's.
Proactively monitor area and remediate potential safety issues.
Use DAKOTA software as a tool for compliance and environmental, health and safety.
Use the tool to report incidents, near misses, and non-conformances.
LEAN Culture Develop and execute upon "standard work" activities.
Assume responsibility for assigned activities on the Engineering Tier and other accountability boards.
Conduct "GEMBA Walks" daily.
Use walks as the primary means of education and communication of expectations.
Improve productivity through elimination of non-value-added activities.
Apply Engineering principles and methodologies to Improve productivity and eliminate waste.
Product Quality Work to maximize equipment efficiency and quality for output.
Member of the facility QIC.
Ensure identification of root cause and subsequent prevention of future customer complaints.
Assist in the training of operators with a focus on quality critical product specifications and process parameters.
Capable of equipment troubleshooting and process design.
EDUCATION:
Bachelor's degree from four or 5-year college or university.
B.S.
in Mechanical, Chemical, Electrical or Controls Engineering.
EXPERIENCE:
Six months to one year related experience and/or training. Bachelor's Degree (B.S.) in Chemical Engineering, Mechanical Engineering, Electrical or Controls Engineering from an ABET Accredited university. Relevant experience from internship is acceptable for experience. CERTIFICATES, LICENSES, REGISTRATIONS: Six Sigma Green Belt is a plus. OTHER SKILLS AND ABILITIES:
Understanding process variance and the resultant effects on Quality. Knowledge of applied statistics. Ability to perform problem analysis utilizing problem-solving methodology.
BENEFITS:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-05-18 15:09:56
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: The Engineer's role is viewed as an extension of management.
Responsibilities are broad and include safety, product quality, process control, productivity improvement, and development of a LEAN culture.
The Engineer is expected to spend a significant amount of time on the floor.
ESSENTIAL DUTIES & RESPONSIBILITIES:
Safety Assume a leadership position at the facility in partnership with the shift supervisors.
Activities include resolution and communication regarding safety issues.
Execute on scheduled PHA's and JSA's.
Proactively monitor area and remediate potential safety issues.
Use DAKOTA software as a tool for compliance and environmental, health and safety.
Use the tool to report incidents, near misses, and non-conformances.
LEAN Culture Develop and execute upon "standard work" activities.
Assume responsibility for assigned activities on the Engineering Tier and other accountability boards.
Conduct "GEMBA Walks" daily.
Use walks as the primary means of education and communication of expectations.
Improve productivity through elimination of non-value-added activities.
Apply Engineering principles and methodologies to Improve productivity and eliminate waste.
Product Quality Work to maximize equipment efficiency and quality for output.
Member of the facility QIC.
Ensure identification of root cause and subsequent prevention of future customer complaints.
Assist in the training of operators with a focus on quality critical product specifications and process parameters.
Capable of equipment troubleshooting and process design.
EDUCATION:
Bachelor's degree from four or 5-year college or university.
B.S.
in Mechanical, Chemical, Electrical or Controls Engineering.
EXPERIENCE:
Six months to one year related experience and/or training. Bachelor's Degree (B.S.) in Chemical Engineering, Mechanical Engineering, Electrical or Controls Engineering from an ABET Accredited university. Relevant experience from internship is acceptable for experience. CERTIFICATES, LICENSES, REGISTRATIONS: Six Sigma Green Belt is a plus. OTHER SKILLS AND ABILITIES:
Understanding process variance and the resultant effects on Quality. Knowledge of applied statistics. Ability to perform problem analysis utilizing problem-solving methodology.
BENEFITS:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-05-18 15:09:56
-
JOB DESCRIPTION
The Process Engineer provides process engineering support for raw materials, compounding, production and packaging functions to improve safety, quality, service and cost efficiencies in the operations area in the Pacific, MO manufacturing plant.
Responsibilities
Support daily production needs through process troubleshooting, experimentation and support for production requirements. Work with project managers on designing and installing PLC controls for capital projects. Work with Allen-Bradley PLC's to maintain and improve current operations. Lead continuous improvement projects to reduce cost, increase material utilization, improve first time right, integrate new products/processes into production and reduce variation. Implement necessary changes and update all documentation (including drawings and SOP's) accordingly. Coordinates with plant engineer to oversee capital projects necessary for the continued improvement and modernization of the plant. Ensure completion of projects within budgets. Responsible for achieving and maintaining safety goals relative to the maintenance and engineering functions.
Responsible for safety devices, safe design, etc.
of all equipment.
Administer process hazard analyses (PHA's) for identified materials, processes, and RHP Compliance.
Create and maintain P&IDs for current and future processes. Support the implementation of statistical process control by implementation of data collection systems Support the site's environmental program by assisting with reporting, compliance monitoring, and QA results in support of process engineering improvements.
Troubleshooting machinery, including PLC coding adjustments.
Qualifications
Bachelor's degree in mechanical, Electrical, or Industrial engineering. 0 to 3 years' experience in manufacturing environment.
Six Sigma/lean manufacturing experience.
Safety and ergonomic experience. Understanding of process control methods, flowmeters, level monitors, and other process controls within a batch manufacturing process.
Mechanically inclined with a hands-on approach Previous Capital Project experience Ability to read and interpret process drawings Strong interpersonal skills: good communication skills both written and verbal. Strong Analytical & Troubleshooting skills.
PC usage with MS Office Suite Strong AutoCAD skillset.
(3D design utilizing Inventor Professional or Solidworks is plus) Experience with PLC's, Allen Bradley is desired.
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world.
At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pacific, Missouri
Posted: 2025-05-16 23:11:05
-
JOB DESCRIPTION
The Process Engineer provides process engineering support for raw materials, compounding, production and packaging functions to improve safety, quality, service and cost efficiencies in the operations area in the Pacific, MO manufacturing plant.
Responsibilities
Support daily production needs through process troubleshooting, experimentation and support for production requirements. Work with project managers on designing and installing PLC controls for capital projects. Work with Allen-Bradley PLC's to maintain and improve current operations. Lead continuous improvement projects to reduce cost, increase material utilization, improve first time right, integrate new products/processes into production and reduce variation. Implement necessary changes and update all documentation (including drawings and SOP's) accordingly. Coordinates with plant engineer to oversee capital projects necessary for the continued improvement and modernization of the plant. Ensure completion of projects within budgets. Responsible for achieving and maintaining safety goals relative to the maintenance and engineering functions.
Responsible for safety devices, safe design, etc.
of all equipment.
Administer process hazard analyses (PHA's) for identified materials, processes, and RHP Compliance.
Create and maintain P&IDs for current and future processes. Support the implementation of statistical process control by implementation of data collection systems Support the site's environmental program by assisting with reporting, compliance monitoring, and QA results in support of process engineering improvements.
Troubleshooting machinery, including PLC coding adjustments.
Qualifications
Bachelor's degree in mechanical, Electrical, or Industrial engineering. 0 to 3 years' experience in manufacturing environment.
Six Sigma/lean manufacturing experience.
Safety and ergonomic experience. Understanding of process control methods, flowmeters, level monitors, and other process controls within a batch manufacturing process.
Mechanically inclined with a hands-on approach Previous Capital Project experience Ability to read and interpret process drawings Strong interpersonal skills: good communication skills both written and verbal. Strong Analytical & Troubleshooting skills.
PC usage with MS Office Suite Strong AutoCAD skillset.
(3D design utilizing Inventor Professional or Solidworks is plus) Experience with PLC's, Allen Bradley is desired.
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world.
At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pacific, Missouri
Posted: 2025-05-16 23:10:55
-
Catfoss Recruitment Ltd are currently in partnership with an award-winning specialist manufacturing company based in Oxfordshire and they are looking to recruit a Multi-Skilled Maintenance Engineer with an Electrical Bias on a permanent basis to their expanding team.
Mon - Fri Days + Overtime & Bens - flexible start times 7am/8am/9am
As a Maintenance Engineer you will be responsible for the routine and preventative maintenance onsite.
Maintenance Engineer (Electrical Bias) - Roles and Responsibilities
Carry out routine maintenance work and respond to equipment faults
Ensure all automation within the business operates efficiently and effectively by carrying out regular inspections and diagnosing faults
Overcome unplanned problems and where possible carry out repairs
Work with other maintenance engineers to design and implement a preventative maintenance plan
Work with specialist equipment, such as programable logic controllers (PLC)
Facilitate installations of new machinery, automation projects and partake in site improvement projects
Carry out all work in line with company Health and safety guidelines
Ensure that your working area is kept in a safe and tidy
Mandatory Responsibilities:
All employees have the following responsibilities:
Working in accordance to the company health and safety policy to take reasonable care for their own and colleagues health and safety.
Adhere to the Company's H&S requirements (i.e.
risk assessments, work instructions and through training).
Work in accordance with information and training provided, and not undertake any task for which authorisation and / or training has not been given.
Desires, Knowledge, Skills and Experience
A proactive work ethic
Good at establishing working relationships with both internal staff and external suppliers, developing relationships and using those relationships to drive behaviours
Results oriented person that will constantly challenge the way things are done
Mechanical and hydraulic maintenance
Electrical maintenance
Injection / compression moulding
Qualifications: C&G/NVQ/BTEC/HNC/HND Electrical Engineering
Maintenance Engineer previous suitable job titles: Maintenance Engineer, Maintenance Technician, Electrical Engineer, Multi-Skilled Maintenance Engineer, Multi-Skilled Engineer, Shift Engineer, Electrical Maintenance Engineer, Electrical Maintenance Technician
Please apply ASAP ....Read more...
Type: Permanent Location: Bicester, England
Start: ASAP
Salary / Rate: £44000.00 - £52000.00 per annum + DOE + OT + Bens - Mon - Fri Days
Posted: 2025-05-16 18:07:16
-
Catfoss Recruitment Ltd are currently in partnership with a globally respected R&D company that is looking to recruit am Instrumentation Engineer to their expanding team on a permanent basis.We are seeking to recruit an Instrumentation Engineer whose primary function will be to manufacture and install instrumentation for use within our R&D testing facilities.
This will include but is not limited to; equipment calibration, the set-up of specialised measurement/monitoring equipment, model assembly and integration for test, troubleshooting and assisting in the operation of facilities.The successful candidate will be expected to demonstrate the drive and commitment necessary for ensuring that work is completed in line with challenging schedule requirements whilst maintaining a clean, safe working environment.
To succeed in this position, you must be flexible in your approach to working hours, which will require shift working, and able to respond quickly to a changing workload.Instrumentation Engineer - Working hours: Mon - Fri, Full time, 40 hours per week, shift work required when testing facilities in operation (typical hours are 07.00 - 15:00 and 14.00 - 22:00 on a rotating weekly basis) office hours otherwiseInstrumentation Engineer - Main duties and responsibilities will include: -, Manufacture of bespoke wiring looms and assemblies with reference to circuit drawings / wiring lists., Hand soldering of fine components at the work-bench and on test models., Miniature strain-gauge installation and wiring., Calibration, maintenance, testing and fault-finding of sensors, signal conditioning and data acquisition systems down to component level., Specify required instrumentation from customer specification., Support the design and integration of instrumentation into customer models and rigs., Work as part of a team, involved in the preparation and assembly of models and rigs for testing to defined quality standards, giving consideration to schedule and costs;, Provide instrumentation support for projects in all of company test facilities., Assist in the operation of company test facilities., Maintenance of the instrumentation hardware and records., Preparation and installation of specialist optical measurement systems in test facilities;, Making recommendations for design, process or hardware modifications to support continuous improvement within the department., General departmental duties such as record maintenance, model storage, organization of equipment, rig maintenance,, Perform tasks with conformance to company Health & Safety Policy and Quality Standards., Ability to work in confined spaces and at heights., Flexible approach to shift working patterns & overtime as required., Undertaking training, where necessary, in support of the above duties, to ensure that safe working practices are observedTraining will be given in all of the specialist activities associated with this position.Instrumentation Engineer - Qualifications & ExperienceThe successful candidate will be an experienced time served technician, preferably educated to HNC/HND Electrical and Electronic Engineering level (or equivalent) with experience of working in an R&D and/or commercial environment.This is an exciting permanent opportunity for the right person to be part of a successful and highly skilled engineering company.
In return, we offer a range of benefits including: a competitive salary and pension scheme; free parking; employee assistance programme; optional sharesave scheme, private health insurance and 26 days' annual leave plus Bank Holidays (increasing with length of service after 5 years' service)Instrumentation Engineer previous suitable job titles: Instrumentation Technician, C&I Technician, EC&I Technician, Controls Technician etc…
Commutable from Bedford, St Neots, Milton Keynes, Northampton, Wellingborough, Biggleswade etc...The successful candidate must satisfy security clearance requirements - including the last 5 years continual UK residency.Please apply ASAP ....Read more...
Type: Permanent Location: Bedford, England
Start: ASAP
Salary / Rate: £35000.00 - £40000.00 per annum + DOE +BUPA,Pension,Life,Sharesave
Posted: 2025-05-16 18:06:38
-
An exciting opportunity has arisen for an experienced Fire Sprinkler Engineer to join a leading provider of fire protection services.
This full-time role offers excellent benefits and a salary range of £35,000 - £45,000.
As a Fire Sprinkler Engineer, you will be responsible for the servicing, testing, and repair of sprinkler systems and other fire safety systems, ensuring compliance with regulations and system functionality.
You will be responsible for:
* Diagnose and resolve faults to maintain system performance and safety.
* Test, inspect, and ensure compliance with fire safety regulations, identifying and addressing any issues.
* Provide detailed reports on system status and maintenance activities.
* Offer technical support and guidance to clients regarding system operations.
* Adhere to health and safety regulations while on-site.
* Participate in emergency callouts and urgent repairs as necessary.
What we are looking for:
* Previously worked as a Fire Sprinkler Engineer, Fire Safety Engineer, Fire suppression Engineer, Fire Sprinkler Maintenance Engineer, Fire systems Service Engineer, Fire systems engineer, Service Engineer or in a similar role.
* Experience of 1 year in sprinkler system maintenance and servicing.
* Understanding of BS EN 12845 and NFPA standards would be preferred.
* Excellent problem-solving and diagnostic abilities.
* Full UK driving licence.
Whats on offer:
* Competitive salary
* Company pension
* Company events
* Annual leave entitlement
* Company vehicle and fuel card
* Ongoing training and career development
* Supportive and friendly working environment
Apply now for this exceptional Fire Engineer opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner.
In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message.
For more information see our Privacy Policy on our website.
It is important you are aware of your individual rights and the provisions the company has put in place to protect your data.
If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Type: Permanent Location: Kent, England
Start:
Duration:
Salary / Rate: £35000 - £45000 Per Annum
Posted: 2025-05-16 16:54:48
-
Maintenance Engineer
Bury
£40,000 - £45,000 Basic + DAYS SHIFT + Career Progression + Training + Great Benefits + IMMEDIATE START
Tired of working in a dead-end job? Are you a maintenance engineer who wants to better yourself and progress your career? A rare opportunity has come up within a leading business in Bury for an ambitious individual looking to climb the ladder and develop themselves.
This progressive, market leading company has invested heavily in new machinery for their manufacturing department.
Due to the growth of the business they're looking for an ambitious maintenance engineer who wants to develop with the company and climb the ladder whilst soaking up as much training as possible.
Your role as maintenance engineer will include:
* Maintenance Engineer role - Days shift shift = Monday to Friday only
* Carry out planned / reactive maintenance and breakdowns
* Conduct electrical and mechanical fault finding and repairs on heavy production machinery
* Run and manage project work every year alongside the maintenance.
The successful maintenance engineer will have:
* A background as an electrical / multi skilled maintenance engineer or similar
* Knowledge of electrical engineering - 3-phase wiring, inverters, drives etc.
* Knowledge of mechanical engineering - Bearings, motors, gearboxes, pumps etc.
* Must be able to commute to Bury
Apply now to Sam Eastgate at Future Engineering Recruitment Keywords: maintenance engineer, maintenance technician, maintenance, electrical engineer, electrical maintenance, multiskilled maintenance engineer, multiskilled, industrial electrician, electrician, electrics, electrical, Bury, Bolton, Manchester, Oldham, Rochdale.
This vacancy is being advertised by Future Engineering Recruitment Ltd.
The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Please visit our website to view other positions we are currently handling.Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.
Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.
....Read more...
Type: Permanent Location: Bury, England
Start: ASAP
Duration: PERM
Salary / Rate: £40000 - £45000 per annum + DAYS SHIFT + Career Progression
Posted: 2025-05-16 16:49:09
-
Overview: Synergi is proud to be working with a leading manufacturing company in Middlesex, currently seeking a skilled Senior Toolmaker to join their dynamic and experienced team.
This is an excellent opportunity to work on a busy industrial site equipped with a wide range of machinery, where your expertise will directly contribute to the success of the operation.
Key Responsibilities:
Manufacture tooling as per Tool Order Requests using current design drawings.
Interpret and work to BS 308 drawing standards and associated British Standards.
Confidently use precision measuring equipment including micrometres, verniers, slip gauges, pin/thread gauges, and shadow graphs.
Carry out maintenance, repair, and improvements on mould and press tooling.
Inspect and test tooling to ensure compliance with specifications and quality standards.
Adhere to all relevant work instructions and health & safety regulations.
Perform basic machine maintenance and maintain a clean, organized work environment.
Ideal Candidate Profile:
Time-served apprenticeship or relevant engineering qualification.
Current Abrasive Wheels Regulations certificate.
Experience with laser welding (desirable).
Familiarity with modern moulding and manufacturing processes.
Strong problem-solving skills with the ability to manage multiple tasks simultaneously.
What's in it for you?
Competitive salary
Day shifts only - enjoy your evenings and weekends
Comprehensive benefits package including training and development opportunities, Flexible holidays, rewards & recognition, etc.
Join a knowledgeable and supportive team in a well-established company
Interested? Apply now or contact Aash on 01923 227 543. Alternatively, send your CV to ....Read more...
Type: Permanent Location: Greenford, England
Start: ASAP
Salary / Rate: £42000 - £45000 per annum + Holidays, pension, training & development,
Posted: 2025-05-16 16:46:01
-
Calibration Engineer
Electrical DC / LF
Leicester, LE8
Mon-Fri Day Shifts, Flexible Hours
Early Finish Friday
Competitive Salary, Holiday and Pension
Are you an experienced Electrical Calibration Engineer looking for an exciting new opportunity? If so then please read on
Precision People is proud to work with a leading specialist in their chosen field.
Due to recent growth, they are looking to expand their team of engineers and grow their calibration team.
You will receive training to familiarise yourself with their products and processes as soon as you join the company.
You'll also have the chance to travel to customer sites as well as provide ongoing support on their products.
The ideal candidate will be a Calibration Engineer / Calibration Technician with experience working on electrical and electronic instrumentation.
The Calibration Engineers' primary responsibility is to carry out calibration procedures on controlled / test equipment and maintain the system around this.
You will work both within the in-house facility and also mobile laboratories which enable you to provide on-site calibration to customers.
As a Calibration Engineer, you should be able to review and conduct basic repairs of equipment.
Moreover, you should also be able to maintain a record of daily operations.
In addition to this, you should also be able to prepare calibration certificates and data reports.
Commutable from South Leicester, Wigston, Oadby, Blaby, Whetstone, Coventry, Hinckley, Nuneaton and Northamptonshire.
The Role of Calibration Engineer
- Performing Calibration tests and certifying electrical equipment, such as PAT Testers and other DC and Low-Frequency equipment
- Performing thorough equipment inspections
- Testing repaired equipment for quality standards
- Owning and running the calibration process to ensure all calibrated equipment is compliant to site
- Calibration requirements
- Scheduling appointments for equipment maintenance and servicing and calibration with third-party vendors where needed
- Addressing and troubleshooting any production queries and equipment failures
- Managing equipment repairs
- Analysing and suggesting equipment upgrades
- Maintaining and updating a record of all daily operations
- Ensuring a complete stock of calibration equipment and supplies
- Maintaining documentation of the calibration process
- Maintain defined KPIs
- Assisting in preparing calibration certificates and data reports
- Provide technical expertise during customer meetings
- On or Offsite customer support as necessary
- Provide excellent customer service in the field
- Adhere to all Health and Safety procedures as required
Key Candidate Requirements
- Apprenticeship, or a related field experience
- Proven work experience as a Calibration Technician or a similar role in the Engineering department
- Complete understanding of Calibration procedures and testing techniques
- Familiarity with electrical inspection tools
- Strong analytical and troubleshooting skills
- Good communication and interpersonal skills
- Excellent mechanical skills
- Proficiency in Microsoft Office
- A team player, as well as the ability to work independently
- Having an eye for detail
- Flexibility in order to deliver excellent customer service
- Ability to travel to customer sites for work
Package and Benefits
- Monday-Friday 39 hour week, day shifts with an early finish on Friday
- Flexible start and finish time
- Salary depending on skills and experience
- Company Pension
- 28 days holiday (including bank holidays)
- Overtime available
- In-house training and company support structure
- Access to fleet vehicles for occasional site visits
- Accommodation and allowances provided for site visits
Interested? To apply for this Calibration Engineer position, here are your two options:
1.
"This is the job for me! When can I start?" - Call now and lets talk through your experience.
Ask for Dan Henderson on 0116 254 5411 between 8.30am - 5.30pm.
2.
"I think I'm right for this position, but I'm not sure I have enough to get an interview" - Click "apply now" so I can read your CV and let you know.
PPDEL ....Read more...
Type: Permanent Location: Leicester,England
Start: 16/05/2025
Salary / Rate: £35000 - £40000 per annum, Benefits: Flexible Hours, Early Finish Friday, Holiday, Pension
Posted: 2025-05-16 15:23:10
-
JOB DESCRIPTION
Title: Continuous Improvement Engineer
Summary:
The Continuous Improvement Engineer will be a part of Carboline Global Continuous Improvement Team supporting the development and execution of continuous improvement projects at the Green Bay manufacturing facility.
The person in this role will serve as a key resource to support plant optimization efforts regarding capacity, cost, safety, quality, and environmental improvements.
Minimum Requirements:
4 years Chemistry, Engineering degree or Minium of 3+ years equivalent experience in a CI role Formal training in Lean and/or Six Sigma methodologies.
Ability to read and interpret documents such as procedure manuals, operating and maintenance manuals and safety rules.
Ability to use a computer for all company required processes, procedures, and training.
Essential Functions:
Understanding of Lean Manufacturing/Continuous Improvement methodologies and ability to teach and model them.
Investigating shortfalls, issues, and complaints in current business processes. Ability to influence, mentor, and coach to get results through others. Collaborates with operations manager and/or plant engineering on modification of equipment and processes to reduce cost and improve efficiency and quality. Works together with R&D, engineering, and plant resources to develop and implement continuous improvement projects. Collaborates with R&D on process development - Including reviewing and approving proposed manufacturing procedures for new products. Provides technical support and consultation to the Quality Control department.
Specifically, regarding recovery plans for off-specification, obsolete, and problem finished goods. Monitors the consistency of production using SQC, SPC, or other appropriate techniques. Strong communicator with top-notch presentation skills who can develop and provide training to production personnel on matters concerning formulation, materials handling, processing, and quality procedures. Follow all environmental rules and regulations to ensure hazardous materials and waste are managed in an environmentally responsible manner. Leadership role in effort to recertify and reclaim Non-Conforming material.
Works in coordination with QC and R&D to isolate, test and recertify Non-Conforming material that can be repackaged and sold. Observing production processes, conducting research, and finding ways to increase efficiency and quality. Continuously challenging the status quo understood as a day-to-day activity in our operating areas. Proactive problem solving based on statistical analysis of corrective actions / assigned by Engineering Director, Plant Manufacturing Manager, QA, EHS projects. Selection and development of tools and fixtures for improvements Perform additional duties as assigned. Commitment to the Company's Safety and Quality programs.
Take an active role in hazard recognition and injury prevention by following all safety rules & regulations
Physical Requirements:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
While performing the duties of this job, the employee must have the ability to stand for up to four hours regularly, required to use hands to finger, handle or feel; reach with hands and arms; and talk or hear.
The employee frequently is required to stand, walk, stoop, kneel, crouch or crawl.
The employee is occasionally required to sit and climb or balance.
Any function may be performed for up to four hours with no breaks.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace for seven years in a row, so culture and maintaining a safe and clean work environment is something we take very seriously. Carboline is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan. Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best"Apply for this ad Online! ....Read more...
Type: Permanent Location: Green Bay, Wisconsin
Posted: 2025-05-16 15:10:01
-
JOB DESCRIPTION
Title: Continuous Improvement Engineer
Summary:
The Continuous Improvement Engineer will be a part of Carboline Global Continuous Improvement Team supporting the development and execution of continuous improvement projects at the Green Bay manufacturing facility.
The person in this role will serve as a key resource to support plant optimization efforts regarding capacity, cost, safety, quality, and environmental improvements.
Minimum Requirements:
4 years Chemistry, Engineering degree or Minium of 3+ years equivalent experience in a CI role Formal training in Lean and/or Six Sigma methodologies.
Ability to read and interpret documents such as procedure manuals, operating and maintenance manuals and safety rules.
Ability to use a computer for all company required processes, procedures, and training.
Essential Functions:
Understanding of Lean Manufacturing/Continuous Improvement methodologies and ability to teach and model them.
Investigating shortfalls, issues, and complaints in current business processes. Ability to influence, mentor, and coach to get results through others. Collaborates with operations manager and/or plant engineering on modification of equipment and processes to reduce cost and improve efficiency and quality. Works together with R&D, engineering, and plant resources to develop and implement continuous improvement projects. Collaborates with R&D on process development - Including reviewing and approving proposed manufacturing procedures for new products. Provides technical support and consultation to the Quality Control department.
Specifically, regarding recovery plans for off-specification, obsolete, and problem finished goods. Monitors the consistency of production using SQC, SPC, or other appropriate techniques. Strong communicator with top-notch presentation skills who can develop and provide training to production personnel on matters concerning formulation, materials handling, processing, and quality procedures. Follow all environmental rules and regulations to ensure hazardous materials and waste are managed in an environmentally responsible manner. Leadership role in effort to recertify and reclaim Non-Conforming material.
Works in coordination with QC and R&D to isolate, test and recertify Non-Conforming material that can be repackaged and sold. Observing production processes, conducting research, and finding ways to increase efficiency and quality. Continuously challenging the status quo understood as a day-to-day activity in our operating areas. Proactive problem solving based on statistical analysis of corrective actions / assigned by Engineering Director, Plant Manufacturing Manager, QA, EHS projects. Selection and development of tools and fixtures for improvements Perform additional duties as assigned. Commitment to the Company's Safety and Quality programs.
Take an active role in hazard recognition and injury prevention by following all safety rules & regulations
Physical Requirements:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
While performing the duties of this job, the employee must have the ability to stand for up to four hours regularly, required to use hands to finger, handle or feel; reach with hands and arms; and talk or hear.
The employee frequently is required to stand, walk, stoop, kneel, crouch or crawl.
The employee is occasionally required to sit and climb or balance.
Any function may be performed for up to four hours with no breaks.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace for seven years in a row, so culture and maintaining a safe and clean work environment is something we take very seriously. Carboline is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan. Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best"Apply for this ad Online! ....Read more...
Type: Permanent Location: Green Bay, Wisconsin
Posted: 2025-05-16 15:10:00
-
Naval Architect - Portsmouth Naval Base - £45,000 Flexible & hybrid working options available
Are you ready to shape the future of naval engineering and support the Royal Navy's surface fleet? My client is looking for a talented Naval Architect to join their expert team based at Portsmouth Naval Base.
This is your opportunity to contribute to high-impact maritime projects and be part of a skilled engineering team with a strong reputation for innovation and technical excellence.
What you'll be doing:
Performing structural analysis using ANSYS Finite Element Analysis (FEA) tools and theoretical methods
Conducting ship stability assessments with Paramarine software
Supporting inclining experiments on naval vessels and conducting post-analysis evaluations
Designing ship modifications and capability upgrades
Carrying out drydock technical assessments and contributing to ship maintenance planning
Consulting on naval base infrastructure requiring naval architecture expertise
Involvement across the full ship lifecycle—from concept design to in-service support for naval platforms
What we're looking for:
Degree-qualified (MEng) in Naval Architecture, Marine Technology, or Ship Science (essential)
Experience with ANSYS Workbench FEA tools (desirable)
Familiarity with Paramarine or similar naval architecture software (desirable)
Proficiency in CAD tools such as AutoCAD or Inventor (desirable)
Why join? This is more than just a desk-based role.
you'll be actively involved with real-world naval platforms, including hands-on work with Royal Navy ships.
You'll enjoy direct exposure to waterfront engineering challenges and opportunities to influence through-life vessel performance.
In return, you'll receive:
A competitive salary of up to £45,000 (based on skills and experience)
Excellent pension scheme
Flexible working hours and hybrid options to support your lifestyle
Access to employee benefits including private healthcare, wellbeing programmes, green car scheme, shopping discounts, and share plans
Potential eligibility for an annual incentive bonus
Location: Portsmouth Naval Base Hours: Full-time, with flexible & hybrid arrangements available ....Read more...
Type: Permanent Location: Portsmouth, England
Start: ASAP
Salary / Rate: £40000 - £45000 per annum
Posted: 2025-05-16 14:50:12
