-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and offers constructive criticisms relative to variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Consult with Main Lab chemist on products more than 10% out of product specifications Upon approval of product record data onto Quality Control car and enter information into computer data base Consult QC manual for specific requirements for product analysis of production batches and customers special requirements Calibrate QC equipment as required Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude. Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-05-30 22:09:20
-
Field Sales Manager - Automotive Aftermarket / Motorsport
Represent a long‑established manufacturer of OE‑quality automotive components trusted across the independent aftermarket, performance tuning, and motorsport sectors.
We're looking for a Field Sales Manager with genuine hands‑on automotive knowledge, ideally gained in the aftermarket, motorsport or performance parts environment, to grow sales through a key distributor network across the UK and Europe.
This role suits someone who loves being in workshops, race garages, and distributor branches, talking parts, solving problems, and turning technical know‑how into commercial wins.
What's on Offer
Salary: £45,000 - £50,000 basic Benefits: Up to £6,000 bonus + car allowance
Contract: Long‑term rolling contract with strong potential for extension
Location: Field‑based across the UK, with European travel as the role expands Ideal bases: Birmingham, Wolverhampton, Coventry, Manchester, Liverpool, Sheffield, Bradford, Milton Keynes, Oxford, Bristol
Why This Role Appeals to Aftermarket & Motorsport People
Real‑World Impact: Work directly with independent garages, performance specialists, race teams, and distributor branches, demonstrating high‑quality components in real applications.
Technical Credibility: Use your practical understanding of vehicle systems to train, troubleshoot, and influence buying decisions.
Autonomy: Own your territory, relationships, and schedule — no micromanagement.
Career Growth: Learn from a global technical team and gain exposure to European performance and aftermarket markets.
Industry Presence: Attend trade shows, motorsport events, and aftermarket exhibitions representing a respected global brand.
What You'll Do
Visit workshops, performance tuners, race teams, and distributors to present and demonstrate products
Deliver hands‑on technical training on product features, installation, and troubleshooting
Resolve technical and commercial queries on‑site, becoming the trusted expert for your region
Generate genuine demand at trade level to support internal sales and marketing
Represent the brand at aftermarket and motorsport events, exhibitions, and trade shows
Gather market intelligence from the field to influence product development and marketing
Maintain accurate sales forecasts based on territory activity
What We're Looking For
Proven experience in automotive aftermarket sales, motorsport, performance parts, or technical automotive roles with commercial exposure
Strong practical understanding of vehicle systems, components, and installation
Confident communicator who enjoys engaging with mechanics, tuners, race engineers, and trade customers
Self‑motivated, organised, and comfortable managing a field‑based territory
Willingness to travel across the UK and Europe, including overnight stays
Full UK driving licence
If you're passionate about the automotive aftermarket or motorsport sector, enjoy face‑to‑face relationship building, and want a role where your technical knowledge directly drives commercial success, this is an excellent opportunity to represent a premium global brand.
Register Your Interest
To apply for the Field Sales Manager - Automotive Aftermarket role, please send your CV to Kayleigh Bradley at Glen Callum Associates Ltd, or call 07908 893621 for a confidential introductory chat.
Job Reference: 4339KBA - Field Sales Manager - Automotive Aftermarket
Glen Callum Associates specialises in automotive recruitment, leveraging extensive industry expertise and a global network to connect exceptional talent with leading organisations worldwide.
Glen Callum Associates is committed to creating diverse and inclusive workplaces.
We welcome applications from all qualified candidates regardless of gender, age, ethnicity, disability, sexual orientation, or background.
We believe that a variety of perspectives makes a team stronger and a workplace better.
If you need any adjustments during the recruitment process, please let us know - we're here to support you.
Note we are not able to provide sponsorship for this role.
....Read more...
Type: Contract Location: Wolverhampton, England
Start: 30/06/2026
Duration: 12 months
Salary / Rate: £45000 - £56000 per annum + 45-50k basic +upto £6k bonus+car allowance
Posted: 2026-05-30 16:00:14
-
Assistant Manager - Technical Services
Ideal backgrounds: Technical Support Team Leader, Product Data Specialist, Catalogue Manager, Senior Technical Advisor, Technical Support Lead
A fantastic opportunity for a senior technical specialist to step into a broader role supporting the coordination of a small technical team within a respected aftermarket brand.
This position blends hands‑on technical expertise with product data accuracy, range management, and cross‑functional collaboration - perfect for someone ready to take the next step in their technical career.
You'll play a key role in maintaining high‑quality product information, supporting technical enquiries, and ensuring accurate application data across UK and EMEA systems.
Working closely with Sales, Marketing, Supply Chain and wider technical colleagues, you'll help deliver a reliable, well‑supported product offering to the aftermarket.
What's in It for You
Competitive salary
Excellent benefits package including enhanced pension, private medical and 25 days holiday
Excellent training and development opportunities
Hybrid working (3 days in the office) with occasional UK travel
A genuine step‑up role for someone looking to broaden their technical responsibilities
Location
Commutable locations include St Albans, Watford, Luton, Milton Keynes, Aylesbury, High Wycombe, Stevenage, Hitchin, Harpenden, Hatfield, Welwyn Garden City, Leighton Buzzard, Amersham, Rickmansworth
What We're Looking For
Automotive technical qualification or relevant engineering degree
Proven automotive aftermarket experience at technician, workshop, technical support or parts supplier level
Experience with product application data, cataloguing or range management
Familiarity with ignition and electronic systems
Strong analytical skills with the ability to interpret data and identify trends
Excellent attention to detail and a structured, organised approach
Ability to coordinate workload and support a small technical team
Confident communicator able to collaborate across Sales, Marketing, Supply Chain and EMEA teams
Understanding of warranty processes and quality control procedures
Comfortable attending exhibitions, seminars and customer events when required
What You'll Be Doing
Support the coordination and day‑to‑day guidance of the Technical Services team
Maintain and improve product application databases, ensuring accuracy across UK and EMEA systems
Assist with the creation of technical content, bulletins and product information for new ranges
Monitor range coverage and ensure catalogues and technical data remain up to date
Track technical enquiries, analyse call log trends and recommend corrective actions
Support the processing of warranty and damaged product returns
Work collaboratively with Sales, Marketing, Supply Chain and Technical teams to deliver a complete product and service offering
Attend exhibitions, seminars, PR events and customer activities as required
Build strong relationships with internal teams, external customers and third‑party data partners
About the Company
A well‑established and respected name in the automotive aftermarket, known for technical excellence, product quality and a collaborative culture.
You'll join a team that values accuracy, continuous improvement and strong technical foundations.
Register Your Interest
To register your interest in this Assistant Manager - Technical Services position, please send your CV to Kayleigh Bradley at Glen Callum Associates Ltd, or call Kayleigh for a confidential introductory chat on 07908 893621.
Job Reference: 4354KB - Assistant Manager - Technical Services - Automotive Aftermarket
Glen Callum Associates specialises in automotive recruitment, connecting exceptional talent with leading organisations across the aftermarket and aligned sectors.
We welcome applications from all qualified candidates and are committed to fostering diverse and inclusive workplaces.
If you require adjustments during the recruitment process, we're here to support you.
Please note we are unable to offer sponsorship for this role. ....Read more...
Type: Permanent Location: Milton Keynes, England
Start: 30/06/2026
Salary / Rate: Competitive salary + pension + private medical
Posted: 2026-05-30 15:00:04
-
JOB DESCRIPTION
About us:
Legend Brands is a growing multi-vertical manufacturer serving restoration, cleaning, and construction professionals; performance automotive cooling markets; fish hatchery and aquaculture operations; through a portfolio of industry-leading brands including Dri-Eaz, Mediclean, UnSmoke, OdorX, Sapphire Scientific, Prochem, Chemspec, Flex-A-Lite, and Marisource.
Job Summary:
Under general supervision, this position leads the execution, optimization, and growth of the company's digital commerce channels, with primary ownership of Amazon Vendor Central/Seller Central, Shopify and other direct eCommerce platforms.
This role manages marketplace performance, product listings, digital advertising, pricing, inventory coordination, content enhancement, and reporting to drive revenue growth, improve customer experience, and support long-term eCommerce strategy.
Supervision Responsibility:
None
Essential Duties:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
Reasonable accommodations may be made to enable qualified individuals with a disability to perform the essential duties.
The list below is intended to be illustrative of the responsibilities of this position and is not all encompassing, nor does it constitute an employment agreement, and the duties may change at any time.
Own day-to-day management and performance of Amazon Vendor Central and Seller Central accounts
Create, optimize, and maintain Amazon product listings, including titles, bullets, descriptions, back-end keywords, images, variations, and A+ Content
Manage Amazon catalog health, listing suppression's, account issues, policy compliance, and overall account health metrics
Oversee Amazon advertising programs including Sponsored Products, Sponsored Brands, Sponsored Display, and related campaign reporting and optimization
Monitor pricing, Buy Box performance, promotions, and competitive activity to support with sales operations
Analyze sales trends, traffic, conversion, advertising efficiency, and channel performance; prepare regular reports and recommendations for leadership
Identify process improvements, platform opportunities, and scalable best practices that strengthen our digital commerce operations and support long-term growth
Minimum Qualifications:
The requirements listed below are representative of the education, experience, certification and/or licensure required.
An equivalent combination of education and experience to perform the essential duties and meet the necessary employment standards may be considered.
Bachelor's Degree in Marketing, Business, eCommerce, Communications, or a related field
5 years of eCommerce, Amazon marketplace management, or related experience required
3 years of hands-on experience managing Amazon Seller Central and/or Vendor Central required
Experience with Amazon listing optimization, catalog management, and account performance reporting required
Experience managing Amazon PPC campaigns and advertising performance a plus
Experience with Shopify or another direct-to-consumer eCommerce platform preferred
Google Analytics certification preferred
Amazon Advertising certification preferred
Employment Standards
Knowledge of Amazon Vendor Central, Seller Central, and Amazon marketplace operations.
Knowledge of eCommerce merchandising, listing optimization, SEO principles, and digital advertising concepts.
Knowledge of online retail analytics, pricing practices, inventory flow, and marketplace compliance requirements.
Skilled in managing Amazon product listings, advertising campaigns, and marketplace performance metrics.
Skilled in analyzing data, building reports, and using Excel, Google Sheets, Shopify analytics, or similar reporting tools.
Ability to manage multiple digital commerce priorities, deadlines, and cross-functional projects with strong attention to detail.
Ability to communicate effectively with internal stakeholders, external partners, and leadership while solving problems and driving results.
Ability to pass a pre-employment background check.
Hiring Range
$80.2K - $90.2K
Benefits
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, 10 paid holidays, generous paid time off, employer matching 401(k) PLUS a company-sponsored pension, and more!
Additional Considerations
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's.
All job offers are contingent upon satisfactory pre-employment drug test and background checks.Apply for this ad Online! ....Read more...
Type: Permanent Location: Phoenix, Arizona
Posted: 2026-05-30 14:09:48
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
The WTI Field Resource Foreman (Foreman) oversees and performs the safety, efficiency, and quality of the WTI field service business.
Safety is our primary priority and will be embedded into every discussion, meeting, and project.
As the clear and established leader of the WTI crew, the Foreman is focused on safety, crew management, and efficient execution of all WTI projects assigned within their respective region.
It is the Foreman's responsibility to deliver timely service to all WTI customers and manage exposure to risks.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Conduct the daily onsite safety brief before the start of the WTI project with the Sales Rep, customer, and the WTI crew.
Inspect and ensure all surroundings, equipment, and tools and identify and discuss any safety concerns.
Complete the Daily Hazard Analysis form and submit it to the Supervisors as applicable.
Foreman also ensures that all technicians complete Daily Hazard Analysis.
Ensure all project communication is completed before the start of any WTI project.
This includes but is not limited to communication with:
WTI Field Resources Supervisor (Supervisor) daily and before starting new projects (ensure any/all communication with the Sales Reps is also shared with the Supervisor.
Sales Rep weekly and/or as needed and before new projects.
WTI crew members will discuss the scope of work, daily tasks, and the overall schedule.
Customer/Client (as needed or required by the Sales Rep) daily and/or weekly.
Efficient management of projects will include managing the crew's start and end times, daily productivity (hours, man-days, etc.), and ensuring tools and materials are available to complete the assigned project safely and efficiently.
Complete the project per the approved scope of work or specification and after issuance by the Supervisor.
Using a designated company-mandated reporting tool, the Foreman will complete an end-of-day and/or end-of-project walk-through to ensure the quality of workmanship and address any punch list items before leaving the job site.
These items will include updates on work performed, materials consumed (T&M projects), and supplies purchased.
Ensure all WTI Field Resources Reps (Field Reps) have a professional appearance and customer interaction while completing services for a customer.
Responsible for ordering, tracking, and monitoring inventory and ensuring quarterly cycle counts are completed and submitted timely.
Provide pricing for self-performing projects over $12,500.
Submit all proposals of over $20,000 to the Supervisor for review and approval before submitting them to the GS Administrator for logging and distribution to the Sales Rep.
Monitor and manage the Field Reps.
Consult with the Supervisor to take appropriate steps or corrective measures to resolve employee work-related issues and necessary documentation.
Work with the Supervisor to elevate the issues to HR as required.
Coordinate with the Supervisor to create project schedules.
Review time reports daily and make necessary corrections with the admin team.
Attending all appropriate calls, meetings, and trainings.
Perform any other duties and/or projects as required or assigned by the Supervisor or Regional Business Manager.
EXPERIENCE:
Experience in commercial roofing a plus
Machinery, mechanic, auto mechanic experience
CERTIFICATES, LICENSES, REGISTRATIONS:
30-hour OSHA certification
Registered Roof Observer (RRO) preferred but not required.
DOT certification or ability to pass OTHER SKILLS AND ABILITIES:
Ability to travel out of town, including overnight stays.
Must have reliable transportation and a valid driver's license.
Ability to work weekends and/or holidays when needed.
Ability to pass a pre-employment drug test.
Ability to read, write, and speak English.
The salary range for applicants in this position generally ranges between $55,000 and $75,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Toledo, Ohio
Posted: 2026-05-30 14:09:47
-
JOB DESCRIPTION
As our Production Supervisor you will be there to supervise the shift to manufacture paint and related products.
Solving challenges is the very foundation of who we are.
After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint.
When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution.
Today, that discovery is Rust-Oleum Corporation.
The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today.
When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry.
Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry.
Here's what you can expect every day:
Ensure schedule adherence and quality standards are met.
Provide direction to associates in Production Dept.
Maintain employee records, Kronos/Payroll, corrective action, warnings, etc.
Adhere to company policies, Federal, State Local requirement and ISO Standards.
Ensure all operations are in compliance with all procedures, rules and regulations.
Perform routine inspection on all production activities assuring that quality standards are met.
Document training of all associates on new procedures and equipment.
Keep employees trained and well informed on new processes.
Work with Maintenance Manager and Mechanics on all equipment problems, change-overs and issues concerning safety in all departments.
Oversee shift clean up tasks, communicate safety and processing concerns as well as issues with regulatory compliance.
Communicate results/ concerns/ issues with Managers, Purchasing and Production Scheduler.
Ensure shift to shift hand-off is completed and problems are addressed via email to Production Manager and other shifts.
Accomplish related results as assigned.
Required Experience:
Associate degree required; BS in an Engineering or Business discipline strongly preferred or commensurate experience.
Minimum of 3+ years of supervisory experience in a manufacturing environment; preferably in chemical/paint manufacturing.
A proven change agent with demonstrated ability to supervise and lead a diverse group of associates.
Train and Coordinate teams to achieve high levels of productivity, quality and safety performance.
Good written and verbal communication skills.
Good computer skills with working knowledge of MS Office packages, SAP experience preferred.
Proven abilities to successfully drive continuous improvement, manage multiple priorities and multitask.
Ability to work well with other peer groups.
Knowledge of industrial safety regulations, BRI, 5S Housekeeping and Lean Manufacturing.
Knowledge of local, state and federal regulations.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Attleboro, Massachusetts
Posted: 2026-05-30 14:09:46
-
JOB DESCRIPTION
Solving challenges is the very foundation of who we are.
After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint.
When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution.
Today, that discovery is Rust-Oleum Corporation.
The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today.
When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry.
Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry.
As our Material Handler, you will work in our plant to pick orders.
We can't ship without you.
Every day you will work alongside a hardworking and fast-paced team to select orders from the warehouse floor and place them on the correct pallet.
To thrive you must be prepared to lift packages of 50 pounds repeatedly and always think safety first.
You'll be someone your team can rely on to make sure our orders are right before they're in route to our customers.
As our Material Handler, you don't need experience but you do need strong character.
What does that mean to us?
You pay attention to details because you care as much about hitting production goals as accuracy on your pallet.
Safety matters.
When you see something, you'll say something to a teammate to make sure that everyone leaves as they come.
You'll show up.
We've built a team you can rely on, and we trust each other to show up every day. Required Experience:
1+ years of related experience preferred.
High school diploma or GED.
Must be able to work above average overtime and flexible hours.
Strong communication and interpersonal skills; ability to read, write, speak, and understand English.
Appropriate forklift and comparable equipment operating skills.
Ability to lift 50 lbs.
repeatedly for extended periods.
Shift: 6am-6:30pm; 2-2-3 shift rotation (continuous operations schedule)
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.
Internal Applicants: If you have been in your current position for one year (unless waived by your Manager), and meet the position requirements, you are welcome to apply for this position.
Please apply in Oracle on Requisition 13803 under 'Current Jobs'.Apply for this ad Online! ....Read more...
Type: Permanent Location: Kenosha, Wisconsin
Posted: 2026-05-30 14:09:46
-
JOB DESCRIPTION
About us:
Legend Brands is a growing multi-vertical manufacturer serving restoration, cleaning, and construction professionals; performance automotive cooling markets; fish hatchery and aquaculture operations; through a portfolio of industry-leading brands including Dri-Eaz, Mediclean, UnSmoke, OdorX, Sapphire Scientific, Prochem, Chemspec, Flex-A-Lite, and Marisource.
Job Summary:
Under general supervision, this position leads the execution, optimization, and growth of the company's digital commerce channels, with primary ownership of Amazon Vendor Central/Seller Central, Shopify and other direct eCommerce platforms.
This role manages marketplace performance, product listings, digital advertising, pricing, inventory coordination, content enhancement, and reporting to drive revenue growth, improve customer experience, and support long-term eCommerce strategy.
Supervision Responsibility:
None
Essential Duties:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
Reasonable accommodations may be made to enable qualified individuals with a disability to perform the essential duties.
The list below is intended to be illustrative of the responsibilities of this position and is not all encompassing, nor does it constitute an employment agreement, and the duties may change at any time.
Own day-to-day management and performance of Amazon Vendor Central and Seller Central accounts
Create, optimize, and maintain Amazon product listings, including titles, bullets, descriptions, back-end keywords, images, variations, and A+ Content
Manage Amazon catalog health, listing suppression's, account issues, policy compliance, and overall account health metrics
Oversee Amazon advertising programs including Sponsored Products, Sponsored Brands, Sponsored Display, and related campaign reporting and optimization
Monitor pricing, Buy Box performance, promotions, and competitive activity to support with sales operations
Analyze sales trends, traffic, conversion, advertising efficiency, and channel performance; prepare regular reports and recommendations for leadership
Identify process improvements, platform opportunities, and scalable best practices that strengthen our digital commerce operations and support long-term growth
Minimum Qualifications:
The requirements listed below are representative of the education, experience, certification and/or licensure required.
An equivalent combination of education and experience to perform the essential duties and meet the necessary employment standards may be considered.
Bachelor's Degree in Marketing, Business, eCommerce, Communications, or a related field
5 years of eCommerce, Amazon marketplace management, or related experience required
3 years of hands-on experience managing Amazon Seller Central and/or Vendor Central required
Experience with Amazon listing optimization, catalog management, and account performance reporting required
Experience managing Amazon PPC campaigns and advertising performance a plus
Experience with Shopify or another direct-to-consumer eCommerce platform preferred
Google Analytics certification preferred
Amazon Advertising certification preferred
Employment Standards
Knowledge of Amazon Vendor Central, Seller Central, and Amazon marketplace operations.
Knowledge of eCommerce merchandising, listing optimization, SEO principles, and digital advertising concepts.
Knowledge of online retail analytics, pricing practices, inventory flow, and marketplace compliance requirements.
Skilled in managing Amazon product listings, advertising campaigns, and marketplace performance metrics.
Skilled in analyzing data, building reports, and using Excel, Google Sheets, Shopify analytics, or similar reporting tools.
Ability to manage multiple digital commerce priorities, deadlines, and cross-functional projects with strong attention to detail.
Ability to communicate effectively with internal stakeholders, external partners, and leadership while solving problems and driving results.
Ability to pass a pre-employment background check.
Hiring Range
$80.2K - $90.2K
Benefits
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, 10 paid holidays, generous paid time off, employer matching 401(k) PLUS a company-sponsored pension, and more!
Additional Considerations
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's.
All job offers are contingent upon satisfactory pre-employment drug test and background checks.Apply for this ad Online! ....Read more...
Type: Permanent Location: Phoenix, Arizona
Posted: 2026-05-30 14:09:27
-
JOB DESCRIPTION
As our Production Supervisor you will be there to supervise the shift to manufacture paint and related products.
Solving challenges is the very foundation of who we are.
After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint.
When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution.
Today, that discovery is Rust-Oleum Corporation.
The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today.
When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry.
Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry.
Here's what you can expect every day:
Ensure schedule adherence and quality standards are met.
Provide direction to associates in Production Dept.
Maintain employee records, Kronos/Payroll, corrective action, warnings, etc.
Adhere to company policies, Federal, State Local requirement and ISO Standards.
Ensure all operations are in compliance with all procedures, rules and regulations.
Perform routine inspection on all production activities assuring that quality standards are met.
Document training of all associates on new procedures and equipment.
Keep employees trained and well informed on new processes.
Work with Maintenance Manager and Mechanics on all equipment problems, change-overs and issues concerning safety in all departments.
Oversee shift clean up tasks, communicate safety and processing concerns as well as issues with regulatory compliance.
Communicate results/ concerns/ issues with Managers, Purchasing and Production Scheduler.
Ensure shift to shift hand-off is completed and problems are addressed via email to Production Manager and other shifts.
Accomplish related results as assigned.
Required Experience:
Associate degree required; BS in an Engineering or Business discipline strongly preferred or commensurate experience.
Minimum of 3+ years of supervisory experience in a manufacturing environment; preferably in chemical/paint manufacturing.
A proven change agent with demonstrated ability to supervise and lead a diverse group of associates.
Train and Coordinate teams to achieve high levels of productivity, quality and safety performance.
Good written and verbal communication skills.
Good computer skills with working knowledge of MS Office packages, SAP experience preferred.
Proven abilities to successfully drive continuous improvement, manage multiple priorities and multitask.
Ability to work well with other peer groups.
Knowledge of industrial safety regulations, BRI, 5S Housekeeping and Lean Manufacturing.
Knowledge of local, state and federal regulations.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Attleboro, Massachusetts
Posted: 2026-05-30 14:09:15
-
JOB DESCRIPTION
Solving challenges is the very foundation of who we are.
After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint.
When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution.
Today, that discovery is Rust-Oleum Corporation.
The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today.
When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry.
Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry.
As our Material Handler, you will work in our plant to pick orders.
We can't ship without you.
Every day you will work alongside a hardworking and fast-paced team to select orders from the warehouse floor and place them on the correct pallet.
To thrive you must be prepared to lift packages of 50 pounds repeatedly and always think safety first.
You'll be someone your team can rely on to make sure our orders are right before they're in route to our customers.
As our Material Handler, you don't need experience but you do need strong character.
What does that mean to us?
You pay attention to details because you care as much about hitting production goals as accuracy on your pallet.
Safety matters.
When you see something, you'll say something to a teammate to make sure that everyone leaves as they come.
You'll show up.
We've built a team you can rely on, and we trust each other to show up every day. Required Experience:
1+ years of related experience preferred.
High school diploma or GED.
Must be able to work above average overtime and flexible hours.
Strong communication and interpersonal skills; ability to read, write, speak, and understand English.
Appropriate forklift and comparable equipment operating skills.
Ability to lift 50 lbs.
repeatedly for extended periods.
Shift: 6am-6:30pm; 2-2-3 shift rotation (continuous operations schedule)
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.
Internal Applicants: If you have been in your current position for one year (unless waived by your Manager), and meet the position requirements, you are welcome to apply for this position.
Please apply in Oracle on Requisition 13803 under 'Current Jobs'.Apply for this ad Online! ....Read more...
Type: Permanent Location: Kenosha, Wisconsin
Posted: 2026-05-30 14:09:14
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
The WTI Field Resource Foreman (Foreman) oversees and performs the safety, efficiency, and quality of the WTI field service business.
Safety is our primary priority and will be embedded into every discussion, meeting, and project.
As the clear and established leader of the WTI crew, the Foreman is focused on safety, crew management, and efficient execution of all WTI projects assigned within their respective region.
It is the Foreman's responsibility to deliver timely service to all WTI customers and manage exposure to risks.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Conduct the daily onsite safety brief before the start of the WTI project with the Sales Rep, customer, and the WTI crew.
Inspect and ensure all surroundings, equipment, and tools and identify and discuss any safety concerns.
Complete the Daily Hazard Analysis form and submit it to the Supervisors as applicable.
Foreman also ensures that all technicians complete Daily Hazard Analysis.
Ensure all project communication is completed before the start of any WTI project.
This includes but is not limited to communication with:
WTI Field Resources Supervisor (Supervisor) daily and before starting new projects (ensure any/all communication with the Sales Reps is also shared with the Supervisor.
Sales Rep weekly and/or as needed and before new projects.
WTI crew members will discuss the scope of work, daily tasks, and the overall schedule.
Customer/Client (as needed or required by the Sales Rep) daily and/or weekly.
Efficient management of projects will include managing the crew's start and end times, daily productivity (hours, man-days, etc.), and ensuring tools and materials are available to complete the assigned project safely and efficiently.
Complete the project per the approved scope of work or specification and after issuance by the Supervisor.
Using a designated company-mandated reporting tool, the Foreman will complete an end-of-day and/or end-of-project walk-through to ensure the quality of workmanship and address any punch list items before leaving the job site.
These items will include updates on work performed, materials consumed (T&M projects), and supplies purchased.
Ensure all WTI Field Resources Reps (Field Reps) have a professional appearance and customer interaction while completing services for a customer.
Responsible for ordering, tracking, and monitoring inventory and ensuring quarterly cycle counts are completed and submitted timely.
Provide pricing for self-performing projects over $12,500.
Submit all proposals of over $20,000 to the Supervisor for review and approval before submitting them to the GS Administrator for logging and distribution to the Sales Rep.
Monitor and manage the Field Reps.
Consult with the Supervisor to take appropriate steps or corrective measures to resolve employee work-related issues and necessary documentation.
Work with the Supervisor to elevate the issues to HR as required.
Coordinate with the Supervisor to create project schedules.
Review time reports daily and make necessary corrections with the admin team.
Attending all appropriate calls, meetings, and trainings.
Perform any other duties and/or projects as required or assigned by the Supervisor or Regional Business Manager.
EXPERIENCE:
Experience in commercial roofing a plus
Machinery, mechanic, auto mechanic experience
CERTIFICATES, LICENSES, REGISTRATIONS:
30-hour OSHA certification
Registered Roof Observer (RRO) preferred but not required.
DOT certification or ability to pass OTHER SKILLS AND ABILITIES:
Ability to travel out of town, including overnight stays.
Must have reliable transportation and a valid driver's license.
Ability to work weekends and/or holidays when needed.
Ability to pass a pre-employment drug test.
Ability to read, write, and speak English.
The salary range for applicants in this position generally ranges between $55,000 and $75,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Toledo, Ohio
Posted: 2026-05-30 14:08:44
-
JOB DESCRIPTION
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Attend and understand daily onsite safety brief prior to the start of the WTI project.
Inspect and ensure safety of surroundings, equipment and tools and identify and discuss any safety concerns.
Execution of project tasks with knowledge of expected production rates, ensuring tools and materials are used safely and efficiently to complete the assigned project. Complete the project per the scope or work, design and specification of contract & engineering documents as directed by foreman.
Responsible to aid foreman in tracking and monitoring project inventory. Maintains highest quality on-site customer relations in projecting positive image. Has knowledge/understanding and performs work in compliance with all governmental rules and regulations affecting work sites and employees, i.e.
OSHA, DOT, EEO/Affirmative Action, EPA, etc. Provides management with earliest possible notification of real and potential job problems. Accepts responsibility for the care, custody, and use of company equipment, material, tools, and other assets as assigned by the WTI Commercial Foreman. Understands and executes proper material and equipment usage, maintenance, and storage. Perform any other duty and/or project as required or assigned by the WTI Foreman and/or Commercial Business Manager. Maintains ethical business conduct.
Job Requirements:
Masons & Tuckpointers Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Cold Applied Waterproofing Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $21 and $38.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Fort Lauderdale, Florida
Posted: 2026-05-30 14:08:43
-
JOB DESCRIPTION
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Attend and understand daily onsite safety brief prior to the start of the WTI project.
Inspect and ensure safety of surroundings, equipment and tools and identify and discuss any safety concerns.
Execution of project tasks with knowledge of expected production rates, ensuring tools and materials are used safely and efficiently to complete the assigned project. Complete the project per the scope or work, design and specification of contract & engineering documents as directed by foreman.
Responsible to aid foreman in tracking and monitoring project inventory. Maintains highest quality on-site customer relations in projecting positive image. Has knowledge/understanding and performs work in compliance with all governmental rules and regulations affecting work sites and employees, i.e.
OSHA, DOT, EEO/Affirmative Action, EPA, etc. Provides management with earliest possible notification of real and potential job problems. Accepts responsibility for the care, custody, and use of company equipment, material, tools, and other assets as assigned by the WTI Commercial Foreman. Understands and executes proper material and equipment usage, maintenance, and storage. Perform any other duty and/or project as required or assigned by the WTI Foreman and/or Commercial Business Manager. Maintains ethical business conduct.
Job Requirements:
Masons & Tuckpointers Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Cold Applied Waterproofing Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $21 and $38.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Orlando, Florida
Posted: 2026-05-30 14:08:40
-
Product & Business Development Manager - Automotive Software
An exciting opportunity to join a fast‑growing provider of automotive business management software as it expands into Germany.
We are looking for a Product and Business Development Manager to drive product localisation, market growth and reseller support across the independent garage and workshop sector.
This role suits an ambitious professional with hands‑on experience in independent workshops or garages who is passionate about the automotive industry and ready to take the next step in their career.
What's on offer
Salary - circa €50-60k depending upon experience, with the opportunity to increase with experience in role
Field‑based role covering Germany
Germany based, flexible on location, ideal locations include: Dortmund, Essen, Bochum, Duisburg, Cologne, Leverkusen, Bonn, Hannover, Hildesheim, Braunschweig, Leipzig, Dresden, Nuremberg, Erlangen, Hamburg
The role
Product Localisation: Work with R&D to tailor the product for local market needs.
Marketing Localisation: Adapt marketing efforts to resonate with German-speaking audiences.
Sales Development: Present, promote, and develop sales to independent garages across Germany.
Implementation Support: Guide garages through onboarding and software implementation, including site visits.
Partnership Building: Identify and onboard local resellers.
Build long-term relationships with them.
Training & Support: Equip resellers with knowledge and tools to succeed in promoting the product to end users.
Our ideal candidate
A native or bilingual German speaker is required for this role.
A professional proficiency in English.
A proven background in the automotive sector with a strong knowledge of independent garages and how they operate.
Tech savvy, with an interest in IT / software and a willingness to learn in this area.
Driven, self-motivated and career orientated.
Comfortable working independently and collaboratively.
This role offers an excellent opportunity for someone with strong experience across independent garages in Germany to join a fast‑growing automotive software business.
You will play a key part in the company's expansion and have the scope to shape your own development as you grow into the role.
Register your interest
To register your interest for this Product & Business Development Manager position, please send your CV to Kayleigh Bradley at Glen Callum Associates Ltd or call Kayleigh for an introductory chat on +44 7908 893621.
Job Reference: 4340KB - Product & Business Development Manager - Automotive Software
Glen Callum Associates specialises in automotive recruitment, leveraging extensive industry expertise and a global network to connect exceptional talent with leading organisations worldwide.
Glen Callum Associates is committed to creating diverse and inclusive workplaces.
We welcome applications from all qualified candidates regardless of gender, age, ethnicity, disability, sexual orientation, or background.
We believe that a variety of perspectives makes a team stronger and a workplace better.
If you need any adjustments during the recruitment process, please let us know - we're here to support you. ....Read more...
Type: Permanent Location: Hamburg (20099), Germany
Start: 30/06/2026
Salary / Rate: €50000 - €60000 per annum
Posted: 2026-05-30 13:00:14
-
Assistant Manager - Technical Services
Ideal backgrounds: Technical Support Team Leader, Product Data Specialist, Catalogue Manager, Senior Technical Advisor, Technical Support Lead
A fantastic opportunity for a senior technical specialist to step into a broader role supporting the coordination of a small technical team within a respected aftermarket brand.
This position blends hands‑on technical expertise with product data accuracy, range management, and cross‑functional collaboration - perfect for someone ready to take the next step in their technical career.
You'll play a key role in maintaining high‑quality product information, supporting technical enquiries, and ensuring accurate application data across UK and EMEA systems.
Working closely with Sales, Marketing, Supply Chain and wider technical colleagues, you'll help deliver a reliable, well‑supported product offering to the aftermarket.
What's in It for You
Competitive salary
Excellent benefits package including enhanced pension, private medical and 25 days holiday
Excellent training and development opportunities
Hybrid working (3 days in the office) with occasional UK travel
A genuine step‑up role for someone looking to broaden their technical responsibilities
Location
Commutable locations include St Albans, Watford, Luton, Milton Keynes, Aylesbury, High Wycombe, Stevenage, Hitchin, Harpenden, Hatfield, Welwyn Garden City, Leighton Buzzard, Amersham, Rickmansworth
What We're Looking For
Automotive technical qualification or relevant engineering degree
Proven automotive aftermarket experience at technician, workshop, technical support or parts supplier level
Experience with product application data, cataloguing or range management
Familiarity with ignition and electronic systems
Strong analytical skills with the ability to interpret data and identify trends
Excellent attention to detail and a structured, organised approach
Ability to coordinate workload and support a small technical team
Confident communicator able to collaborate across Sales, Marketing, Supply Chain and EMEA teams
Understanding of warranty processes and quality control procedures
Comfortable attending exhibitions, seminars and customer events when required
What You'll Be Doing
Support the coordination and day‑to‑day guidance of the Technical Services team
Maintain and improve product application databases, ensuring accuracy across UK and EMEA systems
Assist with the creation of technical content, bulletins and product information for new ranges
Monitor range coverage and ensure catalogues and technical data remain up to date
Track technical enquiries, analyse call log trends and recommend corrective actions
Support the processing of warranty and damaged product returns
Work collaboratively with Sales, Marketing, Supply Chain and Technical teams to deliver a complete product and service offering
Attend exhibitions, seminars, PR events and customer activities as required
Build strong relationships with internal teams, external customers and third‑party data partners
About the Company
A well‑established and respected name in the automotive aftermarket, known for technical excellence, product quality and a collaborative culture.
You'll join a team that values accuracy, continuous improvement and strong technical foundations.
Register Your Interest
To register your interest in this Assistant Manager - Technical Services position, please send your CV to Kayleigh Bradley at Glen Callum Associates Ltd, or call Kayleigh for a confidential introductory chat on 07908 893621.
Job Reference: 4354KB - Assistant Manager - Technical Services - Automotive Aftermarket
Glen Callum Associates specialises in automotive recruitment, connecting exceptional talent with leading organisations across the aftermarket and aligned sectors.
We welcome applications from all qualified candidates and are committed to fostering diverse and inclusive workplaces.
If you require adjustments during the recruitment process, we're here to support you.
Please note we are unable to offer sponsorship for this role. ....Read more...
Type: Permanent Location: St. Albans, England
Start: 30/06/2026
Salary / Rate: Competitive salary + pension + private medical
Posted: 2026-05-30 13:00:14
-
Product & Pricing Manager / Commercial Manager
The company is seeking a strong, technically minded Product & Pricing Manager / Commercial Manager / Product Manager to own and optimise its product portfolio and pricing strategy.
This role is ideal for a commercial pricing professional from the automotive aftermarket or a similar technical B2B environment.
Working closely with Sales, Purchasing, Operations, and suppliers, you will shape pricing models, manage product data, support tenders and quotations, and drive margin improvement across multiple product families and customer groups.
Ideal Location - Northampton | Hybrid
Basic Salary Circa £55,000 + bonus + 25 days holiday plus bank holidays (32 days total) + Pension + Hybrid working + Clear career progression
Key Focus Areas:
Ownership of product range, pricing models, and margin frameworks
Technical pricing for aftermarket, OEM, fleet, and distributor customers
Commercial and cost analysis, including supplier pricing and landed costs
Product performance analysis, SKU rationalisation, and new product introduction
Market and competitor pricing analysis (UK, EU, international)
Cross-functional support for Sales, Purchasing, and Operations
What We're Looking For:
Proven experience as a technical pricing or commercial manager, ideally within the automotive aftermarket (or similar engineered / heavy-duty sectors)
Strong analytical capability with advanced Excel skills
Experience managing product data, supplier pricing, and commercial models
Confident communicator able to influence across commercial and technical teams
Detail-driven, commercially curious, and comfortable operating independently
To register your interest: please contact Robert Cox, Senior Recruitment Consultant at Glen Callum Associates Ltd, on 07398 204832, or email your CV
JOB REF: 4321RC Product & Pricing Manager
Glen Callum Associates is committed to creating diverse and inclusive workplaces.
We welcome applications from all qualified candidates regardless of gender, age, ethnicity, disability, sexual orientation, or background.
We believe that a variety of perspectives makes a team stronger and a workplace better.
If you need any adjustments during the recruitment process, please let us know - we're here to support you.
Applicants must be eligible to work in the UK.
We are unable to offer sponsorship. ....Read more...
Type: Permanent Location: Milton Keynes, England
Start: 30/06/2026
Salary / Rate: £50000 - £60000 per annum + circa £55k + bonus + pension. Hybrid.
Posted: 2026-05-30 12:00:03
-
Field Sales Executive
I am currently looking for a Field Sales Executive to join a market-leading company supplying specialist products into the automotive aftermarket.
This opportunity would suit an experienced Field Sales Executive with aftermarket experience, or a successful field sales professional from another sector looking for a new challenge.
This role is also an excellent next step for a high-performing Internal Sales or Telesales professional ready to progress their career into a field-based sales role.
Joining this market leading businesses in the Automotive Aftermarket can offer great earning potential, ongoing support, ongoing training, personal development, supportive work colleagues and realistic career or further development.
Location: Dartford, Tonbridge, South East London, Redhill, Medway, Croydon, Brighton, Kingston upon Thames, Canterbury
Salary: £28K basic (OTE £38K) + Bonus + Company Car + 24 days Leave (inc BH 32 days total) + Pension + Benefits + Hours: Monday to Friday (NO Weekends)
What You'll Be Doing:
Visiting bodyshops, garages, and repair centres across your region
Demonstrating cutting-edge refinishing, paint, and repair products
Talking to technicians, bodyshop managers, and paint pros
Promoting new lines and helping customers find the best solutions
Building long-term relationships with fellow car enthusiasts
Who We're Looking For:
Someone with a strong interest in cars, car bodywork, or accident repair
Ideally hands-on - maybe from a bodyshop or mechanical background
Confident communicator who enjoys talking to people
Sales experience is great, but not essential - we'll train you!
Full UK driving licence is essential
Register Your Interest:
Interested in starting a rewarding sales career with full training and progression? Send your CV to Robert Cox, Glen Callum Associates Ltd: / 07398 204832 Glen Callum Associates Ltd - Automotive Aftermarket Recruitment Specialists
JOB REF: 4338RC
Glen Callum Associates is committed to creating diverse and inclusive workplaces.
We welcome applications from all qualified candidates regardless of gender, age, ethnicity, disability, sexual orientation, or background.
We believe that a variety of perspectives makes a team stronger and a workplace better.
If you need any adjustments during the recruitment process, please let us know - we're here to support you.
Applicants must be eligible to work in the UK.
We are unable to offer sponsorship. ....Read more...
Type: Permanent Location: Crawley, England
Start: 30/06/2026
Salary / Rate: £28000 - £38000 per annum + £28k basic (OTE £38k) + bonus + car
Posted: 2026-05-30 10:00:04
-
Field Sales Manager - Automotive Aftermarket / Motorsport
Represent a long‑established manufacturer of OE‑quality automotive components trusted across the independent aftermarket, performance tuning, and motorsport sectors.
We're looking for a Field Sales Manager with genuine hands‑on automotive knowledge, ideally gained in the aftermarket, motorsport or performance parts environment, to grow sales through a key distributor network across the UK and Europe.
This role suits someone who loves being in workshops, race garages, and distributor branches, talking parts, solving problems, and turning technical know‑how into commercial wins.
What's on Offer
Salary: £45,000 - £50,000 basic Benefits: Up to £6,000 bonus + car allowance
Contract: Long‑term rolling contract with strong potential for extension
Location: Field‑based across the UK, with European travel as the role expands Ideal bases: Birmingham, Wolverhampton, Coventry, Manchester, Liverpool, Sheffield, Bradford, Milton Keynes, Oxford, Bristol
Why This Role Appeals to Aftermarket & Motorsport People
Real‑World Impact: Work directly with independent garages, performance specialists, race teams, and distributor branches, demonstrating high‑quality components in real applications.
Technical Credibility: Use your practical understanding of vehicle systems to train, troubleshoot, and influence buying decisions.
Autonomy: Own your territory, relationships, and schedule — no micromanagement.
Career Growth: Learn from a global technical team and gain exposure to European performance and aftermarket markets.
Industry Presence: Attend trade shows, motorsport events, and aftermarket exhibitions representing a respected global brand.
What You'll Do
Visit workshops, performance tuners, race teams, and distributors to present and demonstrate products
Deliver hands‑on technical training on product features, installation, and troubleshooting
Resolve technical and commercial queries on‑site, becoming the trusted expert for your region
Generate genuine demand at trade level to support internal sales and marketing
Represent the brand at aftermarket and motorsport events, exhibitions, and trade shows
Gather market intelligence from the field to influence product development and marketing
Maintain accurate sales forecasts based on territory activity
What We're Looking For
Proven experience in automotive aftermarket sales, motorsport, performance parts, or technical automotive roles with commercial exposure
Strong practical understanding of vehicle systems, components, and installation
Confident communicator who enjoys engaging with mechanics, tuners, race engineers, and trade customers
Self‑motivated, organised, and comfortable managing a field‑based territory
Willingness to travel across the UK and Europe, including overnight stays
Full UK driving licence
If you're passionate about the automotive aftermarket or motorsport sector, enjoy face‑to‑face relationship building, and want a role where your technical knowledge directly drives commercial success, this is an excellent opportunity to represent a premium global brand.
Register Your Interest
To apply for the Field Sales Manager - Automotive Aftermarket role, please send your CV to Kayleigh Bradley at Glen Callum Associates Ltd, or call 07908 893621 for a confidential introductory chat.
Job Reference: 4339KBA - Field Sales Manager - Automotive Aftermarket
Glen Callum Associates specialises in automotive recruitment, leveraging extensive industry expertise and a global network to connect exceptional talent with leading organisations worldwide.
Glen Callum Associates is committed to creating diverse and inclusive workplaces.
We welcome applications from all qualified candidates regardless of gender, age, ethnicity, disability, sexual orientation, or background.
We believe that a variety of perspectives makes a team stronger and a workplace better.
If you need any adjustments during the recruitment process, please let us know - we're here to support you.
Note we are not able to provide sponsorship for this role.
....Read more...
Type: Contract Location: Oxford, England
Start: 30/06/2026
Duration: 12 months
Salary / Rate: £45000 - £56000 per annum + 45-50k basic +upto £6k bonus+car allowance
Posted: 2026-05-30 10:00:02
-
Product & Pricing Manager / Commercial Manager
The company is seeking a strong, technically minded Product & Pricing Manager / Commercial Manager / Product Manager to own and optimise its product portfolio and pricing strategy.
This role is ideal for a commercial pricing professional from the automotive aftermarket or a similar technical B2B environment.
Working closely with Sales, Purchasing, Operations, and suppliers, you will shape pricing models, manage product data, support tenders and quotations, and drive margin improvement across multiple product families and customer groups.
Ideal Location - Northampton | Hybrid
Basic Salary Circa £55,000 + bonus + 25 days holiday plus bank holidays (32 days total) + Pension + Hybrid working + Clear career progression
Key Focus Areas:
Ownership of product range, pricing models, and margin frameworks
Technical pricing for aftermarket, OEM, fleet, and distributor customers
Commercial and cost analysis, including supplier pricing and landed costs
Product performance analysis, SKU rationalisation, and new product introduction
Market and competitor pricing analysis (UK, EU, international)
Cross-functional support for Sales, Purchasing, and Operations
What We're Looking For:
Proven experience as a technical pricing or commercial manager, ideally within the automotive aftermarket (or similar engineered / heavy-duty sectors)
Strong analytical capability with advanced Excel skills
Experience managing product data, supplier pricing, and commercial models
Confident communicator able to influence across commercial and technical teams
Detail-driven, commercially curious, and comfortable operating independently
To register your interest: please contact Robert Cox, Senior Recruitment Consultant at Glen Callum Associates Ltd, on 07398 204832, or email your CV
JOB REF: 4321RC Product & Pricing Manager
Glen Callum Associates is committed to creating diverse and inclusive workplaces.
We welcome applications from all qualified candidates regardless of gender, age, ethnicity, disability, sexual orientation, or background.
We believe that a variety of perspectives makes a team stronger and a workplace better.
If you need any adjustments during the recruitment process, please let us know - we're here to support you.
Applicants must be eligible to work in the UK.
We are unable to offer sponsorship. ....Read more...
Type: Permanent Location: Northampton, England
Start: 30/06/2026
Salary / Rate: £50000 - £60000 per annum + circa £55k + bonus + pension. Hybrid.
Posted: 2026-05-30 09:00:05
-
Homologation & Compliance Manager - Automotive
Are you an experienced Vehicle Homologation & Compliance professional with a background in automotive manufacturing, vehicle conversion, or specialist vehicles? Do you have strong knowledge of vehicle type approval, Conformity of Production (CoP), and experience working with regulatory bodies such as the VCA?
This is an excellent opportunity to join a growing automotive manufacturing business where you will take ownership of all vehicle approvals, compliance, certification, and quality systems.
Working closely with Engineering and Production teams, you will play a key role in supporting new vehicle development, ensuring regulatory compliance, and helping drive the business forward.
This is a hands-on, highly influential role offering genuine long-term career development within a dynamic and expanding automotive environment.
Ideal Location South Yorkshire -Rotherham, Sheffield, Leeds, Bradford, Wakefield, Doncaster, Huddersfield, Barnsley, Chesterfield, Mansfield
Salary - £55K to £75K basic + 25 days basic annual leave + Pension + Package
Key Responsibilities
Lead all GB / UKNI Type Approval activities across vehicle programmes
Manage and develop Conformity of Production (CoP) systems
Act as the key contact for VCA and external regulatory bodies
Ensure compliance with all relevant UK and international automotive legislation
Support engineering and product development teams from a compliance perspective
Manage TÜV and external certification processes
Coordinate testing, technical documentation, and approval submissions
Maintain and develop ISO9001 Quality Management Systems
Conduct audits, manage corrective actions, and drive continuous improvement
Support Health & Safety compliance within manufacturing and workshop environments
Manage calibration systems, records, and equipment traceability
Train and support internal teams on compliance procedures and standards
Essential Skills & Experience
Proven experience in automotive homologation / vehicle type approval
Strong understanding of Conformity of Production (CoP)
Experience working with VCA or equivalent approval bodies
ISO9001 Quality Management Systems experience
Background within automotive manufacturing or engineering
To Register Your Interest:
To find out more about this role contact Robert Cox - Senior Recruitment Consultant at Glen Callum Associates Ltd by calling 07398 204832 or email a full up to date CV
Job Ref: 4352RC - Homologation & Compliance Manager - Automotive
Glen Callum Associates is committed to creating diverse and inclusive workplaces.
We welcome applications from all qualified candidates regardless of gender, age, ethnicity, disability, sexual orientation, or background.
We believe that a variety of perspectives makes a team stronger and a workplace better.
If you need any adjustments during the recruitment process, please let us know - we're here to support you. ....Read more...
Type: Permanent Location: Sheffield, England
Start: 30/06/2026
Salary / Rate: £55000 - £75000 per annum + 25 days basic annual leave + pension
Posted: 2026-05-30 08:00:15
-
Product & Business Development Manager - Automotive Software
An exciting opportunity to join a fast‑growing provider of automotive business management software as it expands into Germany.
We are looking for a Product and Business Development Manager to drive product localisation, market growth and reseller support across the independent garage and workshop sector.
This role suits an ambitious professional with hands‑on experience in independent workshops or garages who is passionate about the automotive industry and ready to take the next step in their career.
What's on offer
Salary - circa €50-60k depending upon experience, with the opportunity to increase with experience in role
Field‑based role covering Germany
Germany based, flexible on location, ideal locations include: Dortmund, Essen, Bochum, Duisburg, Cologne, Leverkusen, Bonn, Hannover, Hildesheim, Braunschweig, Leipzig, Dresden, Nuremberg, Erlangen, Hamburg
The role
Product Localisation: Work with R&D to tailor the product for local market needs.
Marketing Localisation: Adapt marketing efforts to resonate with German-speaking audiences.
Sales Development: Present, promote, and develop sales to independent garages across Germany.
Implementation Support: Guide garages through onboarding and software implementation, including site visits.
Partnership Building: Identify and onboard local resellers.
Build long-term relationships with them.
Training & Support: Equip resellers with knowledge and tools to succeed in promoting the product to end users.
Our ideal candidate
A native or bilingual German speaker is required for this role.
A professional proficiency in English.
A proven background in the automotive sector with a strong knowledge of independent garages and how they operate.
Tech savvy, with an interest in IT / software and a willingness to learn in this area.
Driven, self-motivated and career orientated.
Comfortable working independently and collaboratively.
This role offers an excellent opportunity for someone with strong experience across independent garages in Germany to join a fast‑growing automotive software business.
You will play a key part in the company's expansion and have the scope to shape your own development as you grow into the role.
Register your interest
To register your interest for this Product & Business Development Manager position, please send your CV to Kayleigh Bradley at Glen Callum Associates Ltd or call Kayleigh for an introductory chat on +44 7908 893621.
Job Reference: 4340KB - Product & Business Development Manager - Automotive Software
Glen Callum Associates specialises in automotive recruitment, leveraging extensive industry expertise and a global network to connect exceptional talent with leading organisations worldwide.
Glen Callum Associates is committed to creating diverse and inclusive workplaces.
We welcome applications from all qualified candidates regardless of gender, age, ethnicity, disability, sexual orientation, or background.
We believe that a variety of perspectives makes a team stronger and a workplace better.
If you need any adjustments during the recruitment process, please let us know - we're here to support you. ....Read more...
Type: Permanent Location: Dortmund (44135), Germany
Start: 30/06/2026
Salary / Rate: €50000 - €60000 per annum
Posted: 2026-05-30 08:00:15
-
JOB DESCRIPTION
Company Overview
Be a part of Stonhard and be a part of something big.
We are a world-leading manufacturer and installer of seamless floors, walls and lining systems and we offer diverse and challenging careers throughout the world.
Stonhard is a leading brand under RPM Performance Coatings Group, an RPM International Inc.
operating group that generates more than $1.6 billion in annual revenue, employs over 4,600 people and maintains sales operations in more than 65 countries.
We are growing and we love what we do.
Does this sound like your kind of place?
Job Purpose
This role leads the U.S.
marketing team and works collaboratively across regions to support global marketing strategies.
It oversees digital programs and brand initiatives that drive sales growth, enhance customer experience, and strengthen Stonhard's brand presence, while also managing internal communications and company events to promote a positive and engaged culture.
Principal Accountabilities
The following responsibilities are general duties that a particular employee in this position may or may not be required to perform.
The actual duties required of this position may vary.
Support and implement marketing strategies across various channels and events that align with the company's overall vision.
Hold a seat on global marketing council, to make collaborative global marketing decisions with other marketing leaders.
Maintain a position on Stonhard leadership team to support company goals, including long-term strategy process.
Work with digital and content team to support compelling marketing content for websites, social media, literature, and digital signage tools.
Work with creative services to support graphic design, literature, and merchandise program and fulfillment.
Manage approvals for marketing purchases.
Support customer market manager on salesforce.com, automated marketing platform, leads, and customer survey program.
Guide US marketing team members to work together, inspire creativity and ensure effective marketing, and encourage career development and learning within the group.
Work closely with sales, tech service, R&D, business intelligence, and market managers to ensure alignment of sales and overall company goals and capture market trends, innovation, development and product launches, understand customer behavior, and competitor activities to identify opportunities for market growth and innovation.
Lead internal communications to maintain consistent and strong messaging and help build corporate culture.
Support tradeshow and event planning, aligning with company initiatives, outside interests, philanthropic goals to guide positive company culture.
Experience |Education | Certifications
Bachelor's in communications/marketing, or digital marketing with a minimum of five years marketing experience.
Experience managing others.
Experience across a broad range of marketing disciplines, including digital marketing (SEO, PPC, social media, content) and traditional marketing channels.
Leadership skills with a desire to grow and thrive in corporate culture.
Strong communication and organizational skills.
Understanding and ability to execute digital analytics, including SEO and GEO.
Strong analytical skills with the ability to interpret data and translate insights into actionable strategies.
Creative thinker.
Proficient with Microsoft applications.
Willingness to travel.
Benefits and Compensation
The salary range for applicants in this position generally ranges between $85,000 and $90,000.
The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law.
In addition to career advancement and growth, continuous training, and mentoring opportunities, Stonhard offers excellent comprehensive medical, dental and vision plans, financial benefit program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cherry Hill, New Jersey
Posted: 2026-05-29 22:10:23
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
The Design Engineer assesses project requirements, gathers technical field data, determines design requirements, selects appropriate equipment, and provides drafting of HVAC (Heating, Ventilation, and Air Conditioning) restoration projects.
This role combines engineering expertise with drafting skills to ensure that projects are planned and constructed effectively.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
• Conducts on-site visits and assessments to understand the specific scope and technical requirements of individual projects.
This includes evaluating existing HVAC systems, identifying issues or challenges, and testing equipment performance.
• Determines scope and designs solutions for HVAC restoration projects via site visits and coordination with owner/facility staff.
• Understands components and functions of existing mechanical systems being altered or renovated.
• Exercises control over design and production tasks to enable HVAC restoration projects.
• Drafts construction documents and generates specifications for HVAC restoration projects.
• Utilizes in-house estimating tools to create project budgets.
• Assists the sales team with scope reviews and support as needed.
• Creates, maintains, and improves drafting tools and templates.
• Determines the estimated cost of HVAC projects.
This includes calculating costs for labor, materials, equipment, subcontractors, and any other expenses associated with the project.
• Ensures a smooth transition from design to project execution, providing technical guidance and insights during and after construction.
• Other duties as assigned by the manager.
CERTIFICATES, LICENSES, REGISTRATIONS:
• Engineer Intern (EI) Certification
• Professional Engineer (PE) License is preferred
OTHER SKILLS AND ABILITIES:
• Bachelor's degree or equivalent experience.
• 5+ years of industry-specific experience.
• Experience with construction drafting in AutoCAD.
• EI certification with the ability to obtain a PE license preferred.
• Advanced Microsoft Office Suite knowledge preferred.
• Experience with a programming language (VBA, C#, etc.) preferred.
• Experience with cloud-based platforms (Pro-Core, E-Builder, iAuditor, etc.) preferred.
• Ability to travel out of state up to 50% of the time.
The salary range for applicants in this position generally ranges between $91,000 and $125,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Clearwater, Florida
Posted: 2026-05-29 22:10:05
-
JOB DESCRIPTION
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Attend and understand daily onsite safety brief prior to the start of the WTI project.
Inspect and ensure safety of surroundings, equipment and tools and identify and discuss any safety concerns.
Execution of project tasks with knowledge of expected production rates, ensuring tools and materials are used safely and efficiently to complete the assigned project. Complete the project per the scope or work, design and specification of contract & engineering documents as directed by foreman.
Responsible to aid foreman in tracking and monitoring project inventory. Maintains highest quality on-site customer relations in projecting positive image. Has knowledge/understanding and performs work in compliance with all governmental rules and regulations affecting work sites and employees, i.e.
OSHA, DOT, EEO/Affirmative Action, EPA, etc. Provides management with earliest possible notification of real and potential job problems. Accepts responsibility for the care, custody, and use of company equipment, material, tools, and other assets as assigned by the WTI Commercial Foreman. Understands and executes proper material and equipment usage, maintenance, and storage. Perform any other duty and/or project as required or assigned by the WTI Foreman and/or Commercial Business Manager. Maintains ethical business conduct.
Job Requirements:
Masons & Tuckpointers Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Cold Applied Waterproofing Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $21 and $38.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Fort Lauderdale, Florida
Posted: 2026-05-29 22:10:02
-
JOB DESCRIPTION
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Attend and understand daily onsite safety brief prior to the start of the WTI project.
Inspect and ensure safety of surroundings, equipment and tools and identify and discuss any safety concerns.
Execution of project tasks with knowledge of expected production rates, ensuring tools and materials are used safely and efficiently to complete the assigned project. Complete the project per the scope or work, design and specification of contract & engineering documents as directed by foreman.
Responsible to aid foreman in tracking and monitoring project inventory. Maintains highest quality on-site customer relations in projecting positive image. Has knowledge/understanding and performs work in compliance with all governmental rules and regulations affecting work sites and employees, i.e.
OSHA, DOT, EEO/Affirmative Action, EPA, etc. Provides management with earliest possible notification of real and potential job problems. Accepts responsibility for the care, custody, and use of company equipment, material, tools, and other assets as assigned by the WTI Commercial Foreman. Understands and executes proper material and equipment usage, maintenance, and storage. Perform any other duty and/or project as required or assigned by the WTI Foreman and/or Commercial Business Manager. Maintains ethical business conduct.
Job Requirements:
Masons & Tuckpointers Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Cold Applied Waterproofing Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $21 and $38.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Orlando, Florida
Posted: 2026-05-29 22:09:57
