-
JOB DESCRIPTION
GENERAL SUMMARY
Fill completed batches into appropriate containers or onto tanker for shipping purposes, following appropriate procedures for different fill-off methods as indicated on batch ticket.
Seal and apply appropriate labeling to containers as indicated on batch tickets.
Move finished goods to finished goods warehouse for shipping.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate appropriate vat to be filled off per batch ticket instructions Pre-mix material in vat before filling Locate appropriate materials (containers, strainers, equipment, etc.) used for filling, as indicated by batch ticket, and in fill-off manuals Always bond and ground containers before filling Obtain retain per instructions in fill-off procedures.
Labels retain as directed by QC department Complete fill-off procedure Clean vat and equipment using appropriate cleaning solution indicated on batch ticket Make proper notations on batch ticket regarding fill-off Apply appropriate labeling as instructed on batch ticket Move finished goods to warehouse if necessary Maintain neat and orderly work area
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
Basic reading and comprehension skills Basic math skills
Specific Knowledge, Skills, and Abilities Required
Basic machine operation capabilities
Reasoning Ability:
Ability to determine correctness of filling procedures in relation to specified guidelines learned during initial training and during any ongoing training.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions. While performing the essential functions of this job the employee is required to stand and use hands to grasp, handle or feel for entire shift.
The employee is required to walk, bend, stoop, and talk or hear.
Employee must regularly lift and/or move up to 50 pounds and lift and/or move up to 100 pounds with appropriate equipment. Employees must also be able to read and comprehend written instructions and remember processes and procedures for safe and accurate completion of duties for the entirety of the shift.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protective equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Number of batches filled Accuracy of filling Attendance Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2025-04-12 15:15:23
-
JOB DESCRIPTION
Key Resin Company, a high-performance flooring manufacturer, is seeking production associates.
This is a wonderful opportunity to join a stable, growing company where you'll know everyone's name, have a steady schedule, and there are reasonable expectations.
We offer a full range of benefits including health insurance, dental, vision, company paid life and disability, paid time off, 401(k) match, and pension.
The position responsibilities include:
Obtaining materials, measuring, and dispersing material into a mixing vessel
Preparing and blending batches of chemicals to specifications
Color matching to satisfy customer requests
Cleaning and preparing vessels for next batch
Monitoring and reporting raw material inventory
Providing information for production schedulingQualifications
1-2+ years applicable experience
Ability to see and differentiate color
Ability to lift 50-70 lbs.
regularly and move 100 lbs.
occasionally
Longevity in previous positionsSkill Set
Attentive to detail and organized
Self-directed and good problem-solving abilities
Strong math skills, convert weight and measurement
Desire to learn our product and industry
ABOUT US
Key Resin Company is a high-performance flooring manufacturer.
We offer a wide range of floor coverings and wall systems, concrete repair materials, and maintenance products for industrial, institutional and commercial applications.
Key Resin's objective is to provide contractors and facility owners with quality material, excellent service, and technical expertise.
We offer great opportunities to join a stable, growing company that is family oriented, where you'll know everyone's name, and have a good work/life balance.
We offer a full range of benefits including health insurance, dental, vision, life, disability, paid time off, 401(k) match, and pension.Apply for this ad Online! ....Read more...
Type: Permanent Location: Batavia, Ohio
Posted: 2025-04-12 15:15:22
-
JOB DESCRIPTION
Key Resin Company, a high-performance flooring manufacturer, is seeking production associates.
This is a wonderful opportunity to join a stable, growing company where you'll know everyone's name, have a steady schedule, and there are reasonable expectations.
We offer a full range of benefits including health insurance, dental, vision, company paid life and disability, paid time off, 401(k) match, and pension.
The position responsibilities include:
Obtaining materials, measuring, and dispersing material into a mixing vessel
Preparing and blending batches of chemicals to specifications
Color matching to satisfy customer requests
Cleaning and preparing vessels for next batch
Monitoring and reporting raw material inventory
Providing information for production schedulingQualifications
1-2+ years applicable experience
Ability to see and differentiate color
Ability to lift 50-70 lbs.
regularly and move 100 lbs.
occasionally
Longevity in previous positionsSkill Set
Attentive to detail and organized
Self-directed and good problem-solving abilities
Strong math skills, convert weight and measurement
Desire to learn our product and industry
ABOUT US
Key Resin Company is a high-performance flooring manufacturer.
We offer a wide range of floor coverings and wall systems, concrete repair materials, and maintenance products for industrial, institutional and commercial applications.
Key Resin's objective is to provide contractors and facility owners with quality material, excellent service, and technical expertise.
We offer great opportunities to join a stable, growing company that is family oriented, where you'll know everyone's name, and have a good work/life balance.
We offer a full range of benefits including health insurance, dental, vision, life, disability, paid time off, 401(k) match, and pension.Apply for this ad Online! ....Read more...
Type: Permanent Location: Batavia, Ohio
Posted: 2025-04-12 15:10:49
-
JOB DESCRIPTION
GENERAL SUMMARY
Fill completed batches into appropriate containers or onto tanker for shipping purposes, following appropriate procedures for different fill-off methods as indicated on batch ticket.
Seal and apply appropriate labeling to containers as indicated on batch tickets.
Move finished goods to finished goods warehouse for shipping.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate appropriate vat to be filled off per batch ticket instructions Pre-mix material in vat before filling Locate appropriate materials (containers, strainers, equipment, etc.) used for filling, as indicated by batch ticket, and in fill-off manuals Always bond and ground containers before filling Obtain retain per instructions in fill-off procedures.
Labels retain as directed by QC department Complete fill-off procedure Clean vat and equipment using appropriate cleaning solution indicated on batch ticket Make proper notations on batch ticket regarding fill-off Apply appropriate labeling as instructed on batch ticket Move finished goods to warehouse if necessary Maintain neat and orderly work area
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
Basic reading and comprehension skills Basic math skills
Specific Knowledge, Skills, and Abilities Required
Basic machine operation capabilities
Reasoning Ability:
Ability to determine correctness of filling procedures in relation to specified guidelines learned during initial training and during any ongoing training.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions. While performing the essential functions of this job the employee is required to stand and use hands to grasp, handle or feel for entire shift.
The employee is required to walk, bend, stoop, and talk or hear.
Employee must regularly lift and/or move up to 50 pounds and lift and/or move up to 100 pounds with appropriate equipment. Employees must also be able to read and comprehend written instructions and remember processes and procedures for safe and accurate completion of duties for the entirety of the shift.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protective equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Number of batches filled Accuracy of filling Attendance Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2025-04-12 15:10:48
-
Catfoss Recruitment Ltd are currently in partnership with a globally respected R&D company that is looking to recruit a Site Security Controller on a permanent basis to their expanding team.We currently have an exciting opportunity for a Site Security Controller to join our facilities in Bedford.
Reporting directly to Senior Leadership, the job holder will be seen as the subject expert in all security related matters and will be the champion in promoting Security Culture across the organisation.They will be expected to manage all aspects of the physical and procedural Security Operations in line with Company Security Policy.
They will be responsible for ensuring that site security controls are effective and remain compliant in line with MOD and Client requirements.The successful candidate will have significant security experience within a high-profile, high-risk organisation holding Secret materials.
Hold a security industry recognised qualification (CSMP/Degree) and ideally an in-depth knowledge of HMG and industry standard security policy, standards and good practice guidance.Line Management responsibility for site physical security operations team.Salary: £45,000Typical Hours: Full time, 38 hours per weekSite Security Controller - This is a varied and demanding role and it involves a number of duties and responsibilities, including:, Production and maintenance of company Site Risk Register and threat assessments., Conducting first line audits and musters to provide assurance and evidence to MOD, Client and Internal Governance Teams., Conducting security reviews and supporting on site teams in the implementation of required infrastructure uplifts to maintain regulatory compliance., Ensure all protectively marked material assets/information is handled and accounted for in the correct manner., Liaison with government regulators to refine requirements, frameworks and operational evaluation criteria., Adherence to all legislative and customer physical and operational security standards., Manage Service Level Agreements with the manned guarding service provider to ensure contractual requirements are met., Support and provide expert Security Advice to Emergency Planning Teams., Engage with Senior Stakeholders to ensure Operational Security needs are identified and captured in business planning and development., Represent Security in Site SHE activities.Site Security Controller - What we are looking for in you, Demonstrates technical knowledge and skills reflective of a security SQEP practitioner who has progressed within security positions of increasing responsibility, Understanding of legislation and regulations across the market/ business area, Knowledge approaches to security management including physical, information and operational security, Experience of security risk management techniques, Experience of security systems, manned guarding and incident response principles , Good understanding of government and industry security standards and best practice guidance, Holistic approach to security, ideally with knowledge in Cyber/Information Security, Hold a security industry recognised qualification (CSMP/Degree) and ideally an in-depth knowledge of HMG and industry standard security policy, standards and good practice guidance.Site Security Controller previous suitable job titles: Security Controller, Security Manager, Head of Security, Site Security Manager, Head of Site Security etc…The successful candidate must satisfy security clearance requirements - including the last 5 years continual UK residency and British Citizenship (no dual nationals)Please apply ASAP ....Read more...
Type: Permanent Location: Bedford, England
Start: ASAP
Salary / Rate: Up to £45000.00 per annum + +BUPA, Life, Pension, Sharesave
Posted: 2025-04-11 16:37:01
-
Role Overview
We are currently looking for a Supply Chain Manager to join a leading company in the London area.
As the Supply Chain Manager, you will be responsible for leading the operational delivery of pest control products.
This includes managing all aspects of procurement, production, inventory, logistics, supplier relationships, and fulfilment to ensure products are delivered on time, within budget, and to specification.
Key Duties and Responsibilities
Your duties as the Supply Chain Manager will be varied however the key duties and responsibilities are as follows:
1.
Manage relationships with external manufacturers, co-packers, and component suppliers, ensuring production schedules align with product timelines and quality assurance procedures are monitored.
2.
Source and maintain relationships with key suppliers, including contract negotiation, onboarding, and performance management, while ensuring timely procurement of components, packaging materials, and finished goods.
3.
Oversee inventory levels across production and storage sites, coordinate warehousing, shipping, and last-mile logistics, and identify improvements to reduce waste and inefficiencies.
4.
Work with Commercial and Finance teams to develop demand forecasts, build dashboards and reporting to monitor supply chain performance, and support the transition from small-batch operations to scalable production and fulfilment.
Role Requirements
To be successful in your application to this exciting role as the Supply Chain Manager, we are looking to identify the following on your profile and past history:
1.
Relevant degree in a related field.
2.
Proven industry experience in supply chain, production, or operations management, ideally in a startup, FMCG, healthtech, or regulated consumer product environment.
3.
A working knowledge and practical experience with inventory systems, supplier negotiation, and production scheduling.
Key Words: Supply Chain Manager / Procurement / Inventory Management / Logistics / Supplier Relationships / Production Scheduling / Quality Assurance / FMCG / Healthtech / Operations Management / Manufacturing
Hyper Recruitment Solutions Ltd (HRS) is an Equal Opportunities employer.
We welcome applications from anyone who meets the role requirements.
HRS exclusively supports the Life Science sectors, combining recruitment expertise with scientific knowledge to help you advance your career. ....Read more...
Type: Permanent Location: Greater London,England
Start: 11/04/2025
Salary / Rate: £40000 - £50000 per annum, Benefits: Dependent on experience
Posted: 2025-04-11 16:18:09
-
Role Overview
We are currently looking for a Product Sales Manager to join a growing innovative pest control solutions company based in Edinburgh.
As the Product Sales Manager, you will be responsible for driving the sales of the innovative product range and expanding the company's reach across multiple global markets.
Key Duties and Responsibilities
Your duties as the Product Sales Manager will be varied; however, the key duties and responsibilities are as follows:
1.
Own and execute strategic sales plans to meet product sales targets and expand the customer base in the UK, US, European markets, and beyond.
2.
Identify and prospect potential customers, developing and maintaining strong relationships with key decision-makers and stakeholders across distributors, B2B, and B2C sectors.
3.
Showcase the features and benefits of the innovative pest control solutions through compelling product demonstrations and engaging presentations to potential clients.
4.
Collaborate with the marketing team to create promotional materials and campaigns that will support sales efforts and drive brand awareness.
Role Requirements
To be successful in your application to this exciting role as the Product Sales Manager, we are looking to identify the following on your profile and past history:
1.
Relevant degree in a related field.
2.
Proven industry experience in sales, ideally within B2B and B2C environments.
3.
A working knowledge and practical experience with CRM tools like Salesforce and other sales tracking systems.
Key Words:
Product Sales Manager / Pest Control / Sales Strategy / B2B Sales / B2C Sales / Customer Relationship Management / Product Demonstrations / Negotiation / Market Expansion / Sales Forecasting
Hyper Recruitment Solutions Ltd (HRS) is an Equal Opportunities employer.
We welcome applications from anyone who meets the role requirements.
HRS exclusively supports the Life Science sectors, combining recruitment expertise with scientific knowledge to help you advance your career. ....Read more...
Type: Permanent Location: City of Edinburgh,Scotland
Start: 11/04/2025
Salary / Rate: £35000 - £45000 per annum, Benefits: OTE Bonus
Posted: 2025-04-11 15:47:34
-
Stock Controller
Manufacturing Industry
£35,000-£40,000
Office-Based Role in Wigan WN5 0UH
Permanent Role
Monday-Friday Day Shifts
Are you an organised professional with experience in stock control and inventory management, who thrives in a fast-paced environment?
If so, we want to hear from you..
With over 20 years of expertise in the manufacturing industry, our client is a global leader in designing and manufacturing innovative systems for a diverse customer base worldwide.
We are seeking a Stock Controller to manage inventory effectively and ensure products are consistently available.
In this role, you will be responsible for sourcing and purchasing high-quality materials, managing supplier relationships, and working closely with internal teams to streamline procurement and inventory processes.
Other job titles could include: Inventory Manager, Inventory Controller, Purchasing Coordinator, Inventory Specialist, Supply Chain Planner, Stock Assistant, Materials Controller or Materials Planner.
Key Responsibilities - Stock Controller:
- Source and purchase high-quality products and materials.
- Build and maintain strong supplier relationships to ensure timely and accurate deliveries.
- Oversee stock replenishment using MRP and other inventory management systems.
- Perform regular inventory checks to maintain accurate stock levels.
- Analyse sales data and stock performance to enhance inventory and category management.
- Work with warehouse staff to improve logistics and operational efficiency.
- Utilise data visualisation tools to present inventory metrics effectively.
- Ensure compliance with safety protocols, including manual handling when needed.
- Collaborate with team members to enhance the customer experience and support sales initiatives.
Candidate Requirements - Stock Controller:
- Proven experience in procurement, stock control, or inventory management within the manufacturing industry
- Experience in operating/ optimising an MRP system
- Strong analytical skills with the ability to interpret sales trends and inventory metrics.
- Proficiency in Microsoft Excel and Microsoft Office applications.
- Familiarity with SQL or database management tools is advantageous.
- Ability to multitask and perform duties effectively with minimal supervision.
- Strong communication and teamwork skills.
- Excellent attention to detail and organisational abilities.
Salary / Package - Stock Controller:
- Competitive salary £35,000 - £40,000 per year
- Monday-Friday day shifts 40 hours per week
- 28 days holidays (including bank holidays)
- Development to grow and progress in Senior Roles
- Company Pension Scheme
- Office-based role in Wigan
- On-site parking
If you are passionate about stock management and inventory control and want to be part of a thriving company, we encourage you to apply today!
- "This is the job for me! When can I start?" - Call now and lets talk through your experience.
Ask for Emma Gilmore 0116 254 5411 between 7:30am - 4.30pm.
- "I think I'm right for this position, but I'm not sure I have enough to get an interview" - Click "apply now" so I can read your CV and let you know
Precision People is committed to keeping our candidates informed and offer a guaranteed response within 7 days when applying through the application system. PPDEL ....Read more...
Type: Permanent Location: Wigan,England
Start: 11/04/2025
Salary / Rate: £35000 - £40000 per annum, Benefits: Holiday, Pension, Longterm Progression
Posted: 2025-04-11 15:26:08
-
JOB DESCRIPTION
Title: Field Technical Service Engineer I- Houma, LA
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace for seven years in a row, so culture and maintaining a safe and clean work environment is something we take very seriously. Carboline is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
Position Summary:
Travels to field job sites giving routine guidance and assistance with job startups, coating inspection and problems encountered on the job.
Assists in routine in-house work such as product evaluations, equipment maintenance, panel preparation, and other duties necessary for normal function of the department.
Essential Functions:
Preparation of panels prior to coating.
Have a good understanding of the basic operation of hand tools, power tools, abrasive blast cabinet, and pin welder.
To include minor maintenance of same. Provide documentation for panels which will be tested.
Spray nuclear testing orders upon certification. Starting position in Field Service, will handle routine field jobs within capabilities. Contact customers/salesmen to gather pertinent data prior to field trips. Demonstrate proper use of mixing equipment, airless and conventional spray equipment, etc., to apply Carboline products in the assigned divisions. Interpret surface preparation standards per specifications. Demonstrate use and techniques involved with inspections equipment. Train supervisors, inspectors, and painters in the above technical areas. Assist in application of new or revised product evaluations, new equipment evaluations. Carry out procedures as defined in the Technical Service Procedures Manual. Perform additional duties as assigned Commit to the Company's safety and quality programs.
Requirements:
High School Diploma or equivalent, 2-year college Chemistry or minimum 5 years Technical Service experience.
Valid driver's license.
Valid Passport NACE Certified CIP preferred Level 1, NACE Level 2 or NACE Level 3, or ability to obtain within 6 months.
Physical Requirements:
This position requires occasional physical activity.
May require lifting up to 75 lbs.
on occasion.
May require computer usage for an extended period of time - up to 8 hours in a day.
Be able to climb and meet the requirements of a 1A Ladder.
Occasional exposure to various chemicals.
Will require travel of 50% plus, including nighttime and weekends.
Must be able to pass a respirator fit test & maintain respirator requirement.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.Apply for this ad Online! ....Read more...
Type: Permanent Location: New Orleans, Louisiana
Posted: 2025-04-11 15:11:31
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: Performs visual and physical inspection, sampling, testing and control of parts, products and raw materials to conform to established specifications, applicable standards and the ISO 9001 Quality System.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Follows the established quality control procedures to ensure all products are manufactured in compliance with IMS, customer specifications, ISO9001:2015 and ISO14000-2015.
Conducts the inspection and testing of raw materials and products, both in process and finished.
Performs color quality control and corrections by interpreting results obtained using appropriate measurements.
Inspects, calibrates and supervises the use of various instrumentation for testing.
Performs data analysis and provides feedback and improvement suggestions to plant personnel, production management, QC Supervisor and Quality Assurance Manager on all issues concerning quality.
Maintains Quality Control documents and daily reporting of information.
Assists in complaint investigations by performing tests to detect or duplicate issues observed in the field.
Assists in trouble shooting machine functions and production issues as they arise.
Maintains a clean and organized work area.
Performs other duties as assigned.
EDUCATION REQUIREMENT:
High school degree required.
EXPERIENCE REQUIREMENT:
No experience required.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Microsoft Office Suite experience.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2025-04-11 15:11:30
-
JOB DESCRIPTION
Employer Description:
Legend Brands, an industry leader and long standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration. Please apply directly on our careers page - https://hcwx.fa.us2.oraclecloud.com/hcmUI/CandidateExperience/en/sites/CX_2
Job Description:
Legend Brands is seeking a Welder for Prescott, AZ location.
Lays out, fits, and fabricates metal components to assemble structural forms.
Joins, fabricates, and repairs metal and other materials applying appropriate welding techniques.
This is a day shift position, Monday - Friday 5:00 am to 3:30 pm.
Some overtime may be required based on business needs.
Job Requirements:
Inspect completed welds to determine structural soundness Lay out, position, and secure parts and assemblies according to specifications, using straightedge, combination square, calipers, and ruler Tack-weld or weld components and assemblies, using electric, gas, arc, or other welding equipment Remove rough spots from work piece using a grinder Ignite torch and adjust valves, amperage, or voltage to obtain desired flame or arc
Qualifications:
Must have one year of previous experience in a manufacturing environment, welding aluminum, stainless steel, and mild steel using MIG and TIG methods Excellent knowledge of welding machinery, electrical equipment, and manual tools Ability to read and interpret blueprints, specifications, diagrams, or schematics to determine the appropriate welding process Outstanding attention to detail
Hiring Range:
Between $19.00/hour to $21.25/hour
Benefits:
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, 10 paid holidays per year, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations:
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's All job offers are contingent upon satisfactory pre-employment drug test and background screening Accepting applications through May 31, 2025.
Applications will be reviewed as received and on-going interviews will be conducted as necessary Apply for this ad Online! ....Read more...
Type: Permanent Location: Prescott, Arizona
Posted: 2025-04-11 15:11:25
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB: The WTI Field Resource Foreman (Foreman) oversees and performs the safety, efficiency, and quality of the WTI field service business.
Safety is our primary priority and will be embedded into every discussion, meeting, and project.
As the clear and established leader of the WTI crew, the Foreman is focused on safety, crew management, and efficient execution of all WTI projects assigned within their respective region.
It is the Foreman's responsibility to deliver timely service to all WTI customers and manage exposure to risks.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Conduct the daily onsite safety brief before the start of the WTI project with the Sales Rep, customer, and the WTI crew.
Inspect and ensure all surroundings, equipment, and tools and identify and discuss any safety concerns.
Complete the Daily Hazard Analysis form and submit it to the Supervisors as applicable.
Foreman also ensures that all technicians complete Daily Hazard Analysis. Ensure all project communication is completed before the start of any WTI project.
This includes but is not limited to communication with: WTI Field Resources Supervisor (Supervisor) daily and before starting new projects (ensure any/all communication with the Sales Reps is also shared with the Supervisor.
Sales Rep weekly and/or as needed and before new projects.
WTI crew members will discuss the scope of work, daily tasks, and the overall schedule. Customer/Client (as needed or required by the Sales Rep) daily and/or weekly.
Efficient management of projects will include managing the crew's start and end times, daily productivity (hours, man-days, etc.), and ensuring tools and materials are available to complete the assigned project safely and efficiently.
Complete the project per the approved scope of work or specification and after issuance by the Supervisor.
Using a designated company-mandated reporting tool, the Foreman will complete an end-of-day and/or end-of-project walk-through to ensure the quality of workmanship and address any punch list items before leaving the job site.
These items will include updates on work performed, materials consumed (T&M projects), and supplies purchased.
Ensure all WTI Field Resources Reps (Field Reps) have a professional appearance and customer interaction while completing services for a customer.
Responsible for ordering, tracking, and monitoring inventory and ensuring quarterly cycle counts are completed and submitted timely.
Provide pricing for self-performing projects over $12,500.
Submit all proposals of over $20,000 to the Supervisor for review and approval before submitting them to the GS Administrator for logging and distribution to the Sales Rep.
Monitor and manage the Field Reps.
Consult with the Supervisor to take appropriate steps or corrective measures to resolve employee work-related issues and necessary documentation.
Work with the Supervisor to elevate the issues to HR as required.
Coordinate with the Supervisor to create project schedules.
Review time reports daily and make necessary corrections with the admin team.
Attending all appropriate calls, meetings, and trainings.
Perform any other duties and/or projects as required or assigned by the Supervisor or Regional Business Manager.
OTHER SKILLS AND ABILITIES:
Ability to travel out of town, including overnight stays.
Must have reliable transportation and a valid driver's license. Ability to work weekends and/or holidays when needed. Ability to pass a pre-employment drug test.
Ability to read, write, and speak English.
30-hour OSHA certification Registered Roof Observer (RRO) preferred but not required. Minimum of five years of experience in the roofing industry.
Must be thoroughly familiar with built-up, EPDM, PVC, and other forms of low-slope roofing systems, as well as metal and other steep-sloop roofing systems, and how to repair them properly.
The salary range for applicants in this position generally ranges between $53,000 and $65,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Denver, Colorado
Posted: 2025-04-11 15:11:24
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB: The WTI Field Resource Foreman (Foreman) oversees and performs the safety, efficiency, and quality of the WTI field service business.
Safety is our primary priority and will be embedded into every discussion, meeting, and project.
As the clear and established leader of the WTI crew, the Foreman is focused on safety, crew management, and efficient execution of all WTI projects assigned within their respective region.
It is the Foreman's responsibility to deliver timely service to all WTI customers and manage exposure to risks.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Conduct the daily onsite safety brief before the start of the WTI project with the Sales Rep, customer, and the WTI crew.
Inspect and ensure all surroundings, equipment, and tools and identify and discuss any safety concerns.
Complete the Daily Hazard Analysis form and submit it to the Supervisors as applicable.
Foreman also ensures that all technicians complete Daily Hazard Analysis. Ensure all project communication is completed before the start of any WTI project.
This includes but is not limited to communication with: WTI Field Resources Supervisor (Supervisor) daily and before starting new projects (ensure any/all communication with the Sales Reps is also shared with the Supervisor.
Sales Rep weekly and/or as needed and before new projects.
WTI crew members will discuss the scope of work, daily tasks, and the overall schedule. Customer/Client (as needed or required by the Sales Rep) daily and/or weekly.
Efficient management of projects will include managing the crew's start and end times, daily productivity (hours, man-days, etc.), and ensuring tools and materials are available to complete the assigned project safely and efficiently.
Complete the project per the approved scope of work or specification and after issuance by the Supervisor.
Using a designated company-mandated reporting tool, the Foreman will complete an end-of-day and/or end-of-project walk-through to ensure the quality of workmanship and address any punch list items before leaving the job site.
These items will include updates on work performed, materials consumed (T&M projects), and supplies purchased.
Ensure all WTI Field Resources Reps (Field Reps) have a professional appearance and customer interaction while completing services for a customer.
Responsible for ordering, tracking, and monitoring inventory and ensuring quarterly cycle counts are completed and submitted timely.
Provide pricing for self-performing projects over $12,500.
Submit all proposals of over $20,000 to the Supervisor for review and approval before submitting them to the GS Administrator for logging and distribution to the Sales Rep.
Monitor and manage the Field Reps.
Consult with the Supervisor to take appropriate steps or corrective measures to resolve employee work-related issues and necessary documentation.
Work with the Supervisor to elevate the issues to HR as required.
Coordinate with the Supervisor to create project schedules.
Review time reports daily and make necessary corrections with the admin team.
Attending all appropriate calls, meetings, and trainings.
Perform any other duties and/or projects as required or assigned by the Supervisor or Regional Business Manager.
OTHER SKILLS AND ABILITIES:
Ability to travel out of town, including overnight stays.
Must have reliable transportation and a valid driver's license. Ability to work weekends and/or holidays when needed. Ability to pass a pre-employment drug test.
Ability to read, write, and speak English.
30-hour OSHA certification Registered Roof Observer (RRO) preferred but not required. Minimum of five years of experience in the roofing industry.
Must be thoroughly familiar with built-up, EPDM, PVC, and other forms of low-slope roofing systems, as well as metal and other steep-sloop roofing systems, and how to repair them properly.
The salary range for applicants in this position generally ranges between $53,000 and $65,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Denver, Colorado
Posted: 2025-04-11 15:11:01
-
JOB DESCRIPTION
Position Summary:
Carboline is seeking an EH&S Specialist located at our manufacturing facility in Green Bay, WI. This person would be responsible for implementing and managing the environmental, health, safety, security, and emergency response programs for the local production and distribution facility.
We are looking for a dynamic trainer and behavior-based safety implementer for this facility.
This position will involve spending a lot of time on the production floor interacting with employees and supervisors identifying improvements in best practices and improving safety within processes.
PSM experience, hazardous waste management and someone that has worked within a Chemical processing facility is preferred.
Requirements:
Minimum of a BS degree in a safety, regulatory, or chemical related discipline or equivalent experience.
Minimum of 3 years of practical experience in safety, regulatory, and/or chemical fields.
Strong working knowledge of the OSHA process safety management regulations (PSM).
Proven experience as safety manager.
Ability to produce reports and develop relevant policies.
Experience in data analysis and risk assessment.
Excellent organizational and motivational skills.
Outstanding attention to detail and observation ability.
Exceptional communication and interpersonal abilities.
Physical Requirements:
This position requires some physical activity including but not limited to standing/kneeling/walking/sitting on concrete for approximately 50% of workday.
This position could also require computer usage for an extended period of time - up to 8 hours in a day.
Lifting up to 50 pounds; exposure to dust and chemicals including but not limited to: Amines, Polyamides, Isocyanates, Epoxies, Alkyds, Acrylics, and certain inorganic compounds.
Personal protective equipment would be utilized.
This position will require travel by air and/or car including nighttime and overnight up to 25% of the time.
Essential Functions:
Ensure compliance with all local, state, and federal EH&S regulations including written programs, record keeping, reports, inspections, monitoring, testing, and training. Maintain compliance with environmental regulations (Title40CFR) including specifically, but not limited to: Solid and Hazardous Waste management and disposal Clean Air Act compliance Clean Water Act compliance Emergency Response Pollution Prevention Planning and Control Establish local EH&S goals and objectives along with the timely and accurate reporting mechanisms.
Coordinate the investigation of incidents (including near misses and losses) and accidents to determine root causes and assist in the development of corrective and preventive action plans.
Serve as the site liaison to local emergency response providers.
Develop and conduct environmental, safety and health training programs to ensure employee's knowledge, understanding and adherence to safety and environmental regulations.
Serve as Facility Security Officer to implement and maintain facility security requirements as required by the Department of Homeland Security.
Conduct EH&S reviews for new product development, facility modification, product manufacturing modifications and new equipment/machinery installations per the OSHA PSM standard.
Create and update compliance-related standard operating procedures (SOPs) and job hazard analysis (JHAs).
Administer and monitor industrial hygiene sampling and communicate exposure information and/or personal protective equipment requirements to employees.
Report on health and safety awareness, issues, and statistics.
Maintain the health & safety statistics database. Provide coaching and support to employees, supervision, and management to proactively address safety, health, and environmental risks and concerns. Initiate or assist in efforts to continuously improve the overall working environment in the facility.
Provide technical assistance, training, and work direction to colleagues in other departments.
Analyze problems, identifying alternative solutions, and implementing recommendations in support of the Company safety goals and objectives.
Identify potential or actual areas of non-compliance through regular auditing and inspections and ensure appropriate corrective actions are taken.
Review and develop profiles for classification of hazardous waste.
Responsible for timely disposal of process waste and waste finished goods.
Provide support to the Corporate Director of EH&S.
Perform additional duties as assigned.
Commit to the Company's safety and quality programs.
Who We Are: Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace for seven years in a row, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan. Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best"Apply for this ad Online! ....Read more...
Type: Permanent Location: Green Bay, Wisconsin
Posted: 2025-04-11 15:11:00
-
JOB DESCRIPTION
Employer Description:
Legend Brands, an industry leader and long standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration. Please apply directly on our careers page - https://hcwx.fa.us2.oraclecloud.com/hcmUI/CandidateExperience/en/sites/CX_2
Job Description:
Legend Brands is seeking a Welder for Prescott, AZ location.
Lays out, fits, and fabricates metal components to assemble structural forms.
Joins, fabricates, and repairs metal and other materials applying appropriate welding techniques.
This is a day shift position, Monday - Friday 5:00 am to 3:30 pm.
Some overtime may be required based on business needs.
Job Requirements:
Inspect completed welds to determine structural soundness Lay out, position, and secure parts and assemblies according to specifications, using straightedge, combination square, calipers, and ruler Tack-weld or weld components and assemblies, using electric, gas, arc, or other welding equipment Remove rough spots from work piece using a grinder Ignite torch and adjust valves, amperage, or voltage to obtain desired flame or arc
Qualifications:
Must have one year of previous experience in a manufacturing environment, welding aluminum, stainless steel, and mild steel using MIG and TIG methods Excellent knowledge of welding machinery, electrical equipment, and manual tools Ability to read and interpret blueprints, specifications, diagrams, or schematics to determine the appropriate welding process Outstanding attention to detail
Hiring Range:
Between $19.00/hour to $21.25/hour
Benefits:
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, 10 paid holidays per year, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations:
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's All job offers are contingent upon satisfactory pre-employment drug test and background screening Accepting applications through May 31, 2025.
Applications will be reviewed as received and on-going interviews will be conducted as necessary Apply for this ad Online! ....Read more...
Type: Permanent Location: Prescott, Arizona
Posted: 2025-04-11 15:10:56
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: Performs visual and physical inspection, sampling, testing and control of parts, products and raw materials to conform to established specifications, applicable standards and the ISO 9001 Quality System.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Follows the established quality control procedures to ensure all products are manufactured in compliance with IMS, customer specifications, ISO9001:2015 and ISO14000-2015.
Conducts the inspection and testing of raw materials and products, both in process and finished.
Performs color quality control and corrections by interpreting results obtained using appropriate measurements.
Inspects, calibrates and supervises the use of various instrumentation for testing.
Performs data analysis and provides feedback and improvement suggestions to plant personnel, production management, QC Supervisor and Quality Assurance Manager on all issues concerning quality.
Maintains Quality Control documents and daily reporting of information.
Assists in complaint investigations by performing tests to detect or duplicate issues observed in the field.
Assists in trouble shooting machine functions and production issues as they arise.
Maintains a clean and organized work area.
Performs other duties as assigned.
EDUCATION REQUIREMENT:
High school degree required.
EXPERIENCE REQUIREMENT:
No experience required.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Microsoft Office Suite experience.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2025-04-11 15:10:56
-
JOB DESCRIPTION
Position Summary:
Carboline is seeking an EH&S Specialist located at our manufacturing facility in Green Bay, WI. This person would be responsible for implementing and managing the environmental, health, safety, security, and emergency response programs for the local production and distribution facility.
We are looking for a dynamic trainer and behavior-based safety implementer for this facility.
This position will involve spending a lot of time on the production floor interacting with employees and supervisors identifying improvements in best practices and improving safety within processes.
PSM experience, hazardous waste management and someone that has worked within a Chemical processing facility is preferred.
Requirements:
Minimum of a BS degree in a safety, regulatory, or chemical related discipline or equivalent experience.
Minimum of 3 years of practical experience in safety, regulatory, and/or chemical fields.
Strong working knowledge of the OSHA process safety management regulations (PSM).
Proven experience as safety manager.
Ability to produce reports and develop relevant policies.
Experience in data analysis and risk assessment.
Excellent organizational and motivational skills.
Outstanding attention to detail and observation ability.
Exceptional communication and interpersonal abilities.
Physical Requirements:
This position requires some physical activity including but not limited to standing/kneeling/walking/sitting on concrete for approximately 50% of workday.
This position could also require computer usage for an extended period of time - up to 8 hours in a day.
Lifting up to 50 pounds; exposure to dust and chemicals including but not limited to: Amines, Polyamides, Isocyanates, Epoxies, Alkyds, Acrylics, and certain inorganic compounds.
Personal protective equipment would be utilized.
This position will require travel by air and/or car including nighttime and overnight up to 25% of the time.
Essential Functions:
Ensure compliance with all local, state, and federal EH&S regulations including written programs, record keeping, reports, inspections, monitoring, testing, and training. Maintain compliance with environmental regulations (Title40CFR) including specifically, but not limited to: Solid and Hazardous Waste management and disposal Clean Air Act compliance Clean Water Act compliance Emergency Response Pollution Prevention Planning and Control Establish local EH&S goals and objectives along with the timely and accurate reporting mechanisms.
Coordinate the investigation of incidents (including near misses and losses) and accidents to determine root causes and assist in the development of corrective and preventive action plans.
Serve as the site liaison to local emergency response providers.
Develop and conduct environmental, safety and health training programs to ensure employee's knowledge, understanding and adherence to safety and environmental regulations.
Serve as Facility Security Officer to implement and maintain facility security requirements as required by the Department of Homeland Security.
Conduct EH&S reviews for new product development, facility modification, product manufacturing modifications and new equipment/machinery installations per the OSHA PSM standard.
Create and update compliance-related standard operating procedures (SOPs) and job hazard analysis (JHAs).
Administer and monitor industrial hygiene sampling and communicate exposure information and/or personal protective equipment requirements to employees.
Report on health and safety awareness, issues, and statistics.
Maintain the health & safety statistics database. Provide coaching and support to employees, supervision, and management to proactively address safety, health, and environmental risks and concerns. Initiate or assist in efforts to continuously improve the overall working environment in the facility.
Provide technical assistance, training, and work direction to colleagues in other departments.
Analyze problems, identifying alternative solutions, and implementing recommendations in support of the Company safety goals and objectives.
Identify potential or actual areas of non-compliance through regular auditing and inspections and ensure appropriate corrective actions are taken.
Review and develop profiles for classification of hazardous waste.
Responsible for timely disposal of process waste and waste finished goods.
Provide support to the Corporate Director of EH&S.
Perform additional duties as assigned.
Commit to the Company's safety and quality programs.
Who We Are: Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace for seven years in a row, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan. Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best"Apply for this ad Online! ....Read more...
Type: Permanent Location: Green Bay, Wisconsin
Posted: 2025-04-11 15:10:56
-
JOB DESCRIPTION
Title: Field Technical Service Engineer I- Houma, LA
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace for seven years in a row, so culture and maintaining a safe and clean work environment is something we take very seriously. Carboline is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
Position Summary:
Travels to field job sites giving routine guidance and assistance with job startups, coating inspection and problems encountered on the job.
Assists in routine in-house work such as product evaluations, equipment maintenance, panel preparation, and other duties necessary for normal function of the department.
Essential Functions:
Preparation of panels prior to coating.
Have a good understanding of the basic operation of hand tools, power tools, abrasive blast cabinet, and pin welder.
To include minor maintenance of same. Provide documentation for panels which will be tested.
Spray nuclear testing orders upon certification. Starting position in Field Service, will handle routine field jobs within capabilities. Contact customers/salesmen to gather pertinent data prior to field trips. Demonstrate proper use of mixing equipment, airless and conventional spray equipment, etc., to apply Carboline products in the assigned divisions. Interpret surface preparation standards per specifications. Demonstrate use and techniques involved with inspections equipment. Train supervisors, inspectors, and painters in the above technical areas. Assist in application of new or revised product evaluations, new equipment evaluations. Carry out procedures as defined in the Technical Service Procedures Manual. Perform additional duties as assigned Commit to the Company's safety and quality programs.
Requirements:
High School Diploma or equivalent, 2-year college Chemistry or minimum 5 years Technical Service experience.
Valid driver's license.
Valid Passport NACE Certified CIP preferred Level 1, NACE Level 2 or NACE Level 3, or ability to obtain within 6 months.
Physical Requirements:
This position requires occasional physical activity.
May require lifting up to 75 lbs.
on occasion.
May require computer usage for an extended period of time - up to 8 hours in a day.
Be able to climb and meet the requirements of a 1A Ladder.
Occasional exposure to various chemicals.
Will require travel of 50% plus, including nighttime and weekends.
Must be able to pass a respirator fit test & maintain respirator requirement.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.Apply for this ad Online! ....Read more...
Type: Permanent Location: New Orleans, Louisiana
Posted: 2025-04-11 15:10:56
-
Holt Executive is supporting a well-established and rapidly growing design and manufacturing business, seeking a Principal Mechanical Engineer to join its engineering team.
Specialising in advanced systems for the defence sector, the company delivers innovative, precision-engineered solutions to meet complex customer requirements.
This role offers the opportunity to lead a skilled engineering team and contribute to the design and delivery of cutting-edge technology.
Key Responsibilities for the Principal Mechanical Engineer:
- Lead and manage a multi-disciplinary design team to deliver high-quality mechanical design solutions, ensuring projects are completed on time, within budget, and to specification.
- Drive innovative design of complex electro-mechanical systems, mechanisms, and structures using SolidWorks and supporting analysis tools.
- Perform detailed engineering analysis including stress, fatigue, vibration, and materials performance, using both conventional methods and simulation software.
- Produce and manage detailed engineering documentation, including 3D CAD models, manufacturing drawings, test plans, reports, and technical documentation to support product development and customer requirements.
- Integrate mechanical designs with electronic, control, and drive systems, collaborating closely with wider engineering teams.
- Lead design reviews, manage design releases to production, and support manufacturing, testing, and field engineering teams.
- Support project managers with resource planning, progress reporting, and technical problem-solving.
- Assist sales and bid teams with proposals, quotations, and technical input.
- Promote continuous improvement in product development processes, working cross-functionally with other engineering and production teams.
Skills & Experience for the Principal Mechanical Engineer:
- Degree qualified in Mechanical Engineering.
- Proven experience leading the design of complex mechanical systems, preferably within defence or other high-reliability sectors (e.g., R&D, scientific equipment, bespoke machinery).
- Strong knowledge of material selection, machining, fabrication techniques, and surface treatment processes for use in harsh environments.
- Expertise in motion control, precision mechanisms, gear drives, bearings, and motor integration.
- Proficient in SolidWorks 3D CAD and engineering analysis.
- Experience managing small to medium-sized design teams, with a focus on mentoring, coaching, and talent development.
- Excellent communication and stakeholder management skills, capable of presenting complex technical arguments clearly.
- Demonstrated ability to work collaboratively within multi-disciplinary teams and deliver results within fast-paced environments.
- Familiarity with producing technical documentation, safety reviews, risk assessments, and quality control processes.
Benefits & Work-Life Balance:
- 37.5-hour working week with early finish on Fridays
- Hybrid and flexible working arrangements
- 28 days annual leave + Christmas closure + holiday purchase scheme
- Matched pension contributions up to 5%
- Life assurance, income protection, and employee assistance programme
- Electric vehicle salary sacrifice scheme
- Wellbeing support, gym discounts, and reward platform with high street discounts
- Employee share scheme and referral bonus
- Continuous learning & development opportunities
- Free onsite parking
Security Clearance Requirement:
Due to the nature of this role, candidates must be eligible to obtain UK Security Clearance.
Proof of identity, right to work, employment history, and residency in the UK for at least five years will be required.
If your qualifications and experience align with this Principal Mechanical Engineer opportunity, we encourage you to submit your CV to info@holtexecutive.com for consideration. ....Read more...
Type: Permanent Location: West Sussex,England
Start: 11/04/2025
Salary / Rate: £60000 - £75000 per annum
Posted: 2025-04-11 11:10:29
-
Are you an adaptable, strong leader, who wants to be part of forward thinking, growing charity with a modern, creative and holistic approach?
I am looking for an experienced Deputy or Service Manager to lead staff in services for a specialist provider that supports the independence of those with Learning Disabilities.
This role is based in Andover with a salary of £32,000 -£35,00 (DOE)
Please do not apply for this job if you require sponsorship to work in the UK.
This position is only available for those who have right to work in the UK.
Charles Hunter Associates are a specialist recruitment consultancy, established for 13 years.
I work within in the South of England and will work closely with you to help find the most suitable role.
Requirements:
QCF Level 5 Leadership and Management or willingness to complete
A successful track record of performance managing staff within adult social care services
A great understanding of CQC framework and regulations, as well as risk assessment and safety management
Excellent IT and organisational skills
Full, clean driving licence and access to a car
Benefits
Access to a rewards scheme designed to save money on shopping
Contributory Pension Scheme
Induction and ongoing training.
Employee Assistance Programme
Cycle to Work
Wellbeing support (including counselling services, occupational health, and physiotherapy)
If you are looking for your next exciting and rewarding career, then apply now! I will call you within 3 days of your successful application, answer any questions, and fast track your application to my client.
Alternatively, please contact Laura for more information on similar roles.
#IND-CH-SUPWK-PRM24
Hello {CANDIDATE_FIRSTNAME}
I found your resume on Indeed and wanted to reach out about the Children's Deputy Manager position with Charles Hunter Associates.
Your experience as a Deputy Manager, in children's homes and experience with therapeutic practice aligns well with this role.
This position offers a competitive salary and excellent benefits, along with the opportunity to work in a newly refurbished home with a Local Authority provider.
If you're interested, please select 'Confirm my interest' to learn more!
If for whatever reason, this role doesn't quite tick all the boxes, confirm your interest anyway and I can you something more suitable!
Thanks,
Laura Hulin
I am looking or Special Educational Needs (SEN) Teacher who specialises in Maths as a subject for an SEMH school based in Croydon.
The school is part of a nationwide provider that provides specialised educational and residential services for young people with SEMH, SEN and additional needs.
You will be part of a team that values innovation, compassion, and excellence in education, ensuring that every student receives the support they need to succeed.
As an SEMH Teacher, you'll have the opportunity to make a significant impact in the lives of students, helping them achieve their full potential.
A SEMH Teacher's primary goal is to create an inclusive and supportive learning environment where every student can thrive.
This role is crucial in providing high-quality learning experiences for students with diverse needs.
This rewarding position requires a deep understanding of various challenges that students may face, including Autism, Social Emotional and Mental Health (SEMH) issues, and Learning Disabilities.
Your Responsibilities
Individualized Education Plans (IEPs):Developing and implementing personalized learning plans tailored to each student's unique needs and abilities.
Classroom Management: Maintaining a structured and positive classroom atmosphere that encourages participation and learning.
Collaboration: Working closely with other teachers, support staff, and parents to ensure a consistent approach to each student's education and well-being.
Continuous Assessment: Regularly evaluating student progress and adjusting teaching strategies to meet evolving needs.
Required Qualifications
A Postgraduate Certificate in Education (PGCE)or equivalent qualification, emphasizing special education.
Experience or specialized training in working with children with Autism, SEMH, and Learning Disabilities.
Strong communication and interpersonal skills to effectively engage with students, colleagues, and families.
Skills and Attributes
Empathy and Patience: Understanding the unique challenges faced by students with special needs and showing compassion in addressing them.
Adaptability: Being able to adjust teaching methods and materials to suit different learning styles and abilities.
Problem-solving: Developing creative solutions to overcome educational barriers and foster student success.
Commitment to Inclusion: Dedicated to promoting an inclusive environment where all students feel valued and supported.
If this sounds like a match for you, then please get in touch for more information
Work for an Independent, progressive and OFSTED rated ‘OUTSTANDING' children's social care provider that specialises in the support of young people and children with Learning Disabilities, based in Herne Bay.
If you have experience leading staff within children's residential homes and a Level 3 in residential childcare, then I want to hear from you! Starting salary of £30,160 - £34,830
Please do not apply for this job if you require sponsorship to work in the UK.
This position is only available for those who have right to work in the UK.
Charles Hunter Associates are a specialist recruitment consultancy, established for 13 years.
I work within in the South of England and work closely with you to help find the most suitable role.
Benefits:
Competitive salary and pension
Refer a friend scheme
Staff recognition schemes
Team building days and events
Award and achievement ceremonies
Part & full time, sessional contracts
High level of management support
Bespoken training packages
Coaching for professional and personal development, career progression including fully funded Level 3,4 and 5 adult & child care diplomas
Well-being individual counselling and group session support
Requirements:
A level 3 Residential Childcare Diploma or equivalent specific to children's residential care
You must be 21 years of age or older
Social care experience with challenging behaviours at senior level in either Adult or Children's social care
Good knowledge of Ofsted
A successful track record of shift leading teams within children's homes.
Experience with and a passion for working with children and young people
Responsibilities:
Team Leadership, staff allocation and performance management
Rotas
Risk Assessments and care plan updates
Safeguarding
Medication
Auditing
If you are looking for your next exciting and rewarding career move contact: Laura
....Read more...
Type: Permanent Location: Chatham, England
Salary / Rate: £32000 - £35000 per annum + Plus Bonuses
Posted: 2025-04-11 10:13:41
-
Press Brake setter / Operator
Permanent Opportunity
Paying up to £15 per hour
Permanent role Located just off the M11 this role is within 25 miles of London, and within commutable distance from Cambridge, Bishops Stortford and Hertford.
Our client is looking for an experienced Sheet metal worker with Amada Press brake setting and operating experience to join their expanding team.
Interviewing immediately
Start time 07.00.
Finish time 17.00.
Monday to Friday
JOB PURPOSE
To report to the factory Supervisor
To set and operate an Amada Press Brake
To set up a laser cutting machine, Turret punch, drilling and milling machines
General Sheet Metal Fabrication
To read all engineering drawings
Operate an FLT
Press Brake Setter / Operator
CANDIDATE:
- Ability to set and Operate an Amada Press Brake
- Ability to set up a laser cutting machine, Turret punch, drilling and milling machines
- Fabrication Experience
- Highly skilled apprentice trained fabricator who can read engineering drawings cope with varied jobs and materials.
- National FLT Licence
- More than 3 years industry experience setting and operating an Amada Press brake
- Candidate should be able to work on their own initiative.
- Willing to learn and undertake courses as and when needed
Interested? To apply for the Amada Press Brake role
, here are your two options:
- "This is the job for me! When can I start?" - Call now and lets talk through your experience.
Ask for Stacey Catterall on 0116 2545411 between 8am - 5pm or email staceyc@precisionrecruitment.co.uk outside of these hours.
- "I think I'm right for this position, but I'm not sure I have enough to be get an interview" - Click "apply now" so I can read your CV and let you know
Precision are committed to keeping our candidates informed and offer a guaranteed response within 7 days when applying through the application system
Ref: Amada Press Brake
INDTEMP ....Read more...
Type: Contract Location: Stevenage,England
Start: 11/04/2025
Duration: 1.0 HOUR
Salary / Rate: £15 per hour
Posted: 2025-04-11 10:05:16
-
Title: Supply chain officer
Location: Southampton SO15
Salary or Rate: up to £30K
Hours: Full time
Type: Permanent
HSB ID: 187/164
HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Shipping & Energy and Aerospace sectors.
We have several permanent and contract vacancies for multiple businesses across the UK and overseas – visit our website or LinkedIn page for more.
Typically, this person will be managing and developing a group of suppliers to meet quality, cost, and delivery goals for the company, aiming to support efficient and consistent operations.
Day to day duties and responsibilities of the Supply chain officer:
Purchase materials/services in line with business needs at optimal cost.
Act as the main contact and expert for assigned commodities.
Develop and implement commodity strategies.
Drive cost savings while ensuring product quality.
Build and manage strong vendor relationships.
Oversee supplier performance and ensure commercial agreements are in place.
Identify cost reduction and process improvement opportunities.
Support risk mitigation, benchmarking, and decision-making with data reports.
Collaborate on operational improvement projects.
Requirements Of the Supply chain officer:
Knowledge and minimum 2 years’ experience in Supply chain/procurement processes.
ERP system experience.
Supplier negotiations and relationship management.
Proficient in Microsoft Office (especially Excel and PowerPoint)
Marine industry or yacht production knowledge (desirable).
This vacancy is being advertised by HSB Technical Ltd who are governed by the Recruitment and Employment Confederation (REC) and have been appointed to act as the recruitment consultancy for this role. ....Read more...
Type: Permanent Location: Southampton SO15, England
Start: Asap
Duration: permanent
Salary / Rate: £30000 - £30000 Per Annum Benefits
Posted: 2025-04-11 10:01:40
-
Are you a highly skilled Aerospace Deburrer looking for a new opportunity?
We are partnering with a leading aerospace manufacturer seeking an experienced professional to debur, finish, and inspect precision aerospace components to the highest standards.
Key Responsibilities of an Aerospace Deburrer:
- Hand deburring, polishing, and finishing of aerospace components to exact tolerances.
- Reading and interpreting engineering drawings to ensure compliance with specifications.
- Using a range of hand and power tools (grinders, burr tools, scrapers) for precision finishing.
- Visual inspection and quality checking of parts for defects or inconsistencies.
- Working with aluminium, titanium, and other aerospace-grade materials.
- Ensuring all work meets industry standards, including AS9100 and NADCAP requirements.
- Maintaining a clean and organised work area, following health and safety guidelines.
What We're Looking For in an Aerospace Deburrer:
- Proven experience in aerospace deburring, finishing, or metalworking.
- Ability to work with tight tolerances and high-spec components.
- Excellent attention to detail and a strong understanding of aerospace quality standards.
- Comfortable using micrometers, calipers, and other measuring equipment.
- Ability to read and follow complex engineering drawings and instructions.
- A team player with a proactive and quality-focused mindset.
Whats in It for You?
- Competitive pay with overtime opportunities.
- Career growth within a well-established aerospace company.
- Work with cutting-edge aerospace technology.
- Long-term job stability and training opportunities.
- Generous holiday allowance and pension scheme.
Apply Today!
If you have the skills and experience to excel as an Aerospace Deburrer, apply now or contact Ian at Holt Engineering on 07734406996 for more information. ....Read more...
Type: Permanent Location: Ferndown,England
Start: 11/04/2025
Salary / Rate: £13 - £14 per hour
Posted: 2025-04-11 07:45:06
-
Sheet Metal Worker
Sheet Metal Worker Salary: £16-£19
*Please only apply if you have the permanent right to work in the UK.
Applications without this will be automatically rejected
*
The Company
A leading engineering company specialising in precision welding & fabrication, machining, and assemblies is looking for a Sheet Metal Worker to join their team on a permanent basis.
The company has a strong focus on quality and staff happiness and is committed to providing its customers with the highest level of service & value.
The company has a wide range of capabilities, including CNC machining, laser cutting, welding, and assemblies and supplies a wide range of industries.
Sheet Metal Worker Role & Responsibilities
- Able to set & operate CNC Brake Presses
- Work from technical drawings
- Background in aerospace, defence, nuclear or similar is preferable but not essential
- Deburring and dressing parts
- Comfortable working with very thin gauge materials
- Due to the versatile nature of the business, there is a good chance to be trained in different areas of the business
- Any CADCAM experience is also desirable but not essential as training will be provided for the right candidate.
What Next?
Apply now or for more information on the Sheet Metal Worker role, call or message Hayden at Holt Engineering on 07955 081 482. ....Read more...
Type: Permanent Location: Bournemouth,England
Start: 11/04/2025
Salary / Rate: £16 - £19 per hour
Posted: 2025-04-11 07:37:04
-
Wood Machinist
Wood Machinist Salary: £15ph
The Company
This business specialises in crafting bespoke, high-quality products for industries like marine, residential, and luxury markets.
It excels in creating interiors and exteriors for superyachts, custom furniture, and metal finishes, all tailored to client needs.
Its offerings include durable teak tables, bespoke doors, lightweight materials, and precision veneers for superior aesthetics and functionality.
Expertise extends to environmentally sound materials and advanced techniques, ensuring products meet the highest standards of durability and craftsmanship.
Wood Machinist Role & Responsibilities
Machine Operation
- Operate and set up machines like spindle moulders, dimension saws, overhand planers, and thicknessers to shape and finish timber accurately.
- Adjust machines to required settings, ensuring precision in cuts and profiles.
- Tool Preparation and Maintenance - Sharpen, replace, and maintain cutting tools such as blades and cutters.
- Ensure tools and machines are clean, safe, and in working order.
Material Handling
- Select and prepare the correct type and size of wood or board materials for machining based on project specifications.
Reading and Interpreting Technical Drawings
- Study detailed drawings, templates, and production specifications to understand dimensions and required finishes.
Shaping and Profiling Wood
- Create complex shapes and joints, including rebates, grooves, and mouldings, while maintaining high precision and quality.
Quality Control
- Inspect finished products for defects, ensuring dimensions and finishes meet client specifications.
- Perform adjustments to maintain consistency throughout production.
Problem-Solving and Adaptation
- Identify and resolve issues like incorrect cuts or machine malfunctions quickly to minimise waste and downtime.
Team Work
- Work alongside other machinists, designers, and production staff to meet project deadlines & communicate effectively about progress or challenges.
How to Apply for the Wood Machinist Position
Apply now or call/message Hayden at Holt Engineering on 07955 081 482 for more information on the Wood Machinist role. ....Read more...
Type: Contract Location: Poole,England
Start: 11/04/2025
Duration: 1.0 HOUR
Salary / Rate: £15 - £15.50 per hour
Posted: 2025-04-11 07:36:04
