-
Subsea under water connector system Assembly Technician required to join an electrical and mechanical production team who build electrical connector pins for Oil and Gas tree systems.
Responsibilities
Mechanical, and electrical assembly.
Test, measurement and production process control.
Maintain tools, machinery, and equipment to ensure optimal operation.
Support continuous improvement initiatives and apply modern manufacturing principles.
Skills
Hands on experience in mechanical assembly, testing and manufacture.
Ability to read blueprints and perform precision electrical tasks such as wire preparation, crimping, and harness termination.
Hydraulic, electronic, and mechanical system understanding. ....Read more...
Type: Contract Location: Barrow in Furness, England
Start: ASAP
Duration: Temp to Perm
Salary / Rate: £17 - £20 Per Annum None
Posted: 2026-05-27 11:21:49
-
Subsea under water connector system Assembly Technician required to join an electrical and mechanical production team who build electrical connector pins for Oil and Gas tree systems.
Responsibilities
Mechanical, and electrical assembly.
Test, measurement and production process control.
Maintain tools, machinery, and equipment to ensure optimal operation.
Support continuous improvement initiatives and apply modern manufacturing principles.
Skills
Hands on experience in mechanical assembly, testing and manufacture.
Ability to read blueprints and perform precision electrical tasks such as wire preparation, crimping, and harness termination.
Hydraulic, electronic, and mechanical system understanding. ....Read more...
Type: Permanent Location: Barrow in Furness, England
Start: ASAP
Duration: Temp to Perm
Salary / Rate: £28000 - £36000 Per Annum None
Posted: 2026-05-27 11:20:44
-
We are currently looking for an experienced Machinist Technician with CNC experience to support manufacturing and production operations in a high-precision engineering environment.
Key Responsibilities
Set up, operate and maintain CNC machines (including turning and milling)
Read and interpret engineering drawings and technical specifications
Produce components to tight tolerances and quality standards
Carry out routine machine maintenance and basic fault finding
Perform in-process inspections using measuring equipment ( micrometers, verniers)
Follow HSE, quality and company procedures at all times
Requirements
Proven experience as a Machinist , CNC Machinist, Machinist Technician
Strong experience with CNC turning and milling
Ability to read and work from technical drawings
Knowledge of precision measurement tools
Engineering qualification or apprenticeship (preferred)
Experience in oil and gas, aerospace, defence, or heavy engineering environments is an advantage
....Read more...
Type: Permanent Location: Barrow in Furness, England
Start: ASAP
Duration: Temp to Perm
Salary / Rate: £28000 - £36000 Per Annum None
Posted: 2026-05-27 11:20:41
-
A leading oil and gas engineering company is looking for an experienced Machinist to support safe, efficient and reliable manufacturing operations.
You will set up, operate and maintain lathes and CNC machines to produce electrical connector components to specification.
The role involves machine maintenance, quality inspection, fault finding and continuous improvement activities within a busy machine shop environment.
Key responsibilities
Set up and operate machines safely and efficiently
Maintain equipment and report faults or deviations
Inspect components to ensure quality and accuracy
Follow production schedules and safety procedures
Participate in shop floor and toolbox meetings
Key Skills
Previous machine shop experience
Ability to read and interpret technical drawings
Mechanical engineering qualification
Basic CNC programming experience
....Read more...
Type: Contract Location: Barrow in Furness, England
Start: ASAP
Duration: Temp to Perm
Salary / Rate: £17 - £20 Per Annum None
Posted: 2026-05-27 11:20:38
-
Machinist required to join an steel tubing manufacturing team who produce offshore and subsea umbilicals comprising of mechanical machined metal components and electrical connectors for power transfer and control communications.
You will help ensure that Oil and gas subsea equipment is produced, assembled and delivered on time by maintaining workshop and field tooling equipment.
Requirements
Metal working, tooling machining, CNC experience.
The ideal candidate will have offshore, subsea or oil and gas equipment experience.
Responsibilities
Operate tools, machining and production equipment.
Maintain equipment and manufacturing systems tools helping drive continuous improvement.
Work from pre job and Toolbox crew and assembly meetings.
Failure investigation as relevant.
....Read more...
Type: Permanent Location: Barrow in Furness, England
Start: ASAP
Duration: Temp to Perm
Salary / Rate: £32000 - £48000 Per Annum None
Posted: 2026-05-27 11:04:39
-
Senior Project Engineer
Location: Aberdeen/Liverpool
Job Type: Permanent, Full-time (Hybrid Flexibility)
Salary: Competitive
Are you an experienced Project Engineer ready to support key subsea energy projects? Do you thrive on offshore execution, technical assurance and quality? Then this sounds like the perfect role for you!
Key Responsibilities
Provide engineering support during tendering and project delivery phases.
Lead project kick-off activities and coordinate technical deliverables, schedules, and documentation.
Prepare and review offshore construction, fabrication, installation, and inspection documentation.
Coordinate with clients, subcontractors, offshore vessels, and internal teams to ensure successful project execution.
Review lifting plans, vessel deck layouts, and offshore procedures to ensure safe and compliant operations.
Provide technical support during offshore activities and resolve engineering queries.
Manage offshore construction schedules, project reporting, and as-built documentation.
Support equipment hire coordination, including on-hire/off-hire activities.
Mentor junior engineers and support workload/resource planning within the engineering team.
Ensure compliance with company QHSE standards, BMS procedures, and contractual requirements.
Skills & Experience
5+ years' experience within subsea operations, offshore construction, renewables, or oil & gas.
Degree-qualified in Engineering or equivalent industry experience.
Strong understanding of subsea/topside installation techniques, rigging, sea fastening, and offshore operations.
Proficient in CAD/design software and Microsoft Office applications.
Strong organisational, communication, and stakeholder management skills.
Self-motivated with the ability to manage priorities and work independently.
Desirable
Current Offshore Survival & Firefighting certification.
Current Topside Medical certificate
If you're ready for your next career move, then please apply below or forward your CV !
....Read more...
Type: Permanent Location: England
Posted: 2026-05-26 09:03:13
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The 3rd Shift Certified Maintenance Mechanic is responsible for the inspection, troubleshooting, and repair of process and facility-related equipment.
Equipment inspection includes preventative maintenance (PM) and associated documentation.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Comply with all safety policies (especially Cardinal Rules - e.g., Hot Work, LOTO, and line breaking).
Partner with Maintenance Supervisor and Facilities Manager to support LEAN initiatives to eliminate unplanned production interruptions due to process equipment failure.
Implement the needed preventative measures, including optimization of the PM program.
Ensure reliable operation of facility support processes and utilities (i.e., HVAC, Air Compressors, Tow motors, Hot Oil Heaters, and chiller systems).
Diagnose/Troubleshoot, repair/replace, and maintain facility electrical systems (e.g.
programmable logic controllers, human machine interfaces, and lighting) and components (e.g.
sensors, switches, valves, PLCs, and control wiring), and mechanical systems (e.g.
product vessels/reactors, pumps) and components.
Investigate equipment/process failures and difficulties to diagnose and troubleshoot faulty operation.
Assist the Maintenance Supervisor in arranging and coordinating contractors, safety permits, and tasks to support facility and process maintenance/repairs.
Serve, as needed, on process hazard analysis (PHA) teams/sessions.
EDUCATION AND EXPERIENCE:
One-year certificate from college or technical school.
Maintenance Mechanic Certificate or equivalent as deemed by the company.
Industrial Technology program graduate preferred.
Two to four years related experience and/or training.
Experience in LEAN manufacturing.
Military mechanical experience is a plus.
Experience in chemical/coating processing & production preferred.
Experience in dispensing operations preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Journeyman cards in various disciplines are preferred.
Ability to work overtime as needed.
Ability to manage multiple priorities, effective Team Player, self-motivated, quick learner.
Excellent communication skills with the ability to read, write, and communicate fluently in English.
Scope of experience: Electrical, Mechanical, HVAC, Welding.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2026-05-25 22:10:20
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The 3rd Shift Certified Maintenance Mechanic is responsible for the inspection, troubleshooting, and repair of process and facility-related equipment.
Equipment inspection includes preventative maintenance (PM) and associated documentation.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Comply with all safety policies (especially Cardinal Rules - e.g., Hot Work, LOTO, and line breaking).
Partner with Maintenance Supervisor and Facilities Manager to support LEAN initiatives to eliminate unplanned production interruptions due to process equipment failure.
Implement the needed preventative measures, including optimization of the PM program.
Ensure reliable operation of facility support processes and utilities (i.e., HVAC, Air Compressors, Tow motors, Hot Oil Heaters, and chiller systems).
Diagnose/Troubleshoot, repair/replace, and maintain facility electrical systems (e.g.
programmable logic controllers, human machine interfaces, and lighting) and components (e.g.
sensors, switches, valves, PLCs, and control wiring), and mechanical systems (e.g.
product vessels/reactors, pumps) and components.
Investigate equipment/process failures and difficulties to diagnose and troubleshoot faulty operation.
Assist the Maintenance Supervisor in arranging and coordinating contractors, safety permits, and tasks to support facility and process maintenance/repairs.
Serve, as needed, on process hazard analysis (PHA) teams/sessions.
EDUCATION AND EXPERIENCE:
One-year certificate from college or technical school.
Maintenance Mechanic Certificate or equivalent as deemed by the company.
Industrial Technology program graduate preferred.
Two to four years related experience and/or training.
Experience in LEAN manufacturing.
Military mechanical experience is a plus.
Experience in chemical/coating processing & production preferred.
Experience in dispensing operations preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Journeyman cards in various disciplines are preferred.
Ability to work overtime as needed.
Ability to manage multiple priorities, effective Team Player, self-motivated, quick learner.
Excellent communication skills with the ability to read, write, and communicate fluently in English.
Scope of experience: Electrical, Mechanical, HVAC, Welding.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2026-05-25 22:09:31
-
JOB DESCRIPTION
JOB DUTIES AND RESPONSIBILITIES:
Supervise and lead on-site crews performing AHU restoration, HVAC system cleaning, duct rehabilitation, coil cleaning, system sanitization, and related mechanical services.
Execute projects in accordance with contractual scope, applicable industry standards (NADCA, IICRC, SMACNA when applicable), and internal QA/QC requirements
Coordinate daily work activities to meet project schedules, manpower plans, and budget constraints
Serve as the on-site technical authority for mechanical system restoration and HVAC cleaning operations
Verify proper containment, protection of building systems, and cleanliness standards throughout the project
Document conditions before, during, and after work via written reports and photo documentation
Identify scope gaps, system deficiencies, and repair needs, and communicate findings to the Project Manager
Conduct daily and weekly on-site safety meetings and enforce company and OSHA safety policies
Ensure proper use of PPE, fall protection, lockout/tagout procedures, and confined-space protocols where applicable
Maintain a clean, organized, and safe jobsite at all times
Manage, direct, and mentor field technicians assigned to HVAC restoration and mechanical cleaning projects
Provide hands-on training to new and existing personnel on safety procedures, AHU restoration techniques, and equipment operation
Monitor crew performance and workmanship, addressing deficiencies and reinforcing expectations
Manage truck and trailer inventory, ensure equipment readiness, and report material usage
Verify proper handling, storage, and deployment of chemicals, tools, and consumables
The Field Supervisor is expected to competently perform and supervise:
AHU and mechanical component restoration
Sheet metal fabrication, modification, and field fit-up related to HVAC systems, ductwork, plenums, and equipment enclosures
Read and implement engineered mechanical drawings
HVAC and duct system cleaning and rehabilitation
Coil, fan, cabinet, and plenum cleaning
HVAC-related restoration services in occupied facilities
Interface with Project Managers, Building Sciences teams, and company leadership
Support cross-department coordination between remediation, restoration, and mechanical scopes
Represent the company professionally with clients, consultants, and site representatives
The salary range for applicants in this position generally ranges between $55,000 and $68,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Clearwater, Florida
Posted: 2026-05-25 06:09:06
-
JOB DESCRIPTION
JOB DUTIES AND RESPONSIBILITIES:
Supervise and lead on-site crews performing AHU restoration, HVAC system cleaning, duct rehabilitation, coil cleaning, system sanitization, and related mechanical services.
Execute projects in accordance with contractual scope, applicable industry standards (NADCA, IICRC, SMACNA when applicable), and internal QA/QC requirements
Coordinate daily work activities to meet project schedules, manpower plans, and budget constraints
Serve as the on-site technical authority for mechanical system restoration and HVAC cleaning operations
Verify proper containment, protection of building systems, and cleanliness standards throughout the project
Document conditions before, during, and after work via written reports and photo documentation
Identify scope gaps, system deficiencies, and repair needs, and communicate findings to the Project Manager
Conduct daily and weekly on-site safety meetings and enforce company and OSHA safety policies
Ensure proper use of PPE, fall protection, lockout/tagout procedures, and confined-space protocols where applicable
Maintain a clean, organized, and safe jobsite at all times
Manage, direct, and mentor field technicians assigned to HVAC restoration and mechanical cleaning projects
Provide hands-on training to new and existing personnel on safety procedures, AHU restoration techniques, and equipment operation
Monitor crew performance and workmanship, addressing deficiencies and reinforcing expectations
Manage truck and trailer inventory, ensure equipment readiness, and report material usage
Verify proper handling, storage, and deployment of chemicals, tools, and consumables
The Field Supervisor is expected to competently perform and supervise:
AHU and mechanical component restoration
Sheet metal fabrication, modification, and field fit-up related to HVAC systems, ductwork, plenums, and equipment enclosures
Read and implement engineered mechanical drawings
HVAC and duct system cleaning and rehabilitation
Coil, fan, cabinet, and plenum cleaning
HVAC-related restoration services in occupied facilities
Interface with Project Managers, Building Sciences teams, and company leadership
Support cross-department coordination between remediation, restoration, and mechanical scopes
Represent the company professionally with clients, consultants, and site representatives
The salary range for applicants in this position generally ranges between $55,000 and $68,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Clearwater, Florida
Posted: 2026-05-25 06:08:07
-
JOB DESCRIPTION
The maintenance mechanic supports production efficiencies by ensuring repair and preventive maintenance of industrial manufacturing equipment and plant facilities.
Opportunities exists for advanced training in manufacturing maintenance: thermography, vibration analysis, ultrasound, precision alignment.
Job Responsibilities:
Respond to urgent problems with equipment or facilities.
Execute assigned work orders of installing new equipment, repair/replace malfunctioning components, or preventive maintenance activities.
Document tasks by filling out forms.
Troubleshoot equipment failures.
Interact with production personnel to diagnose issues with the ability to decide course of action.
Follow safety protocols and environmental regulations.
Qualifications:
High School diploma or GED and completion of formal certified training program with completion certificates and a minimum 5 years of experience in an industrial manufacturing setting.
Able to read and interpret procedures to execute work tasks.
Understanding of basic OSHA safety standards for general industry.
Mechanical aptitude: using tools and measuring devices, basic understanding of piping, rotating parts, pneumatic.
hydraulic systems, and mechanical systems with panel controls.
Must be a team player and model the Values and Expectations of the organization and it's parent company.
Desired Skills and Experience:
Experience with chemicals: hazardous handling, waste, or spill management procedures.
Worked with liquid systems: pumps, mixers, agitators, valves, filters.
Familiar with solids or powder conveying, milling, packaging, filtering.
Understanding of plant utilities: Boilers, Heaters, Steam, Chilled Water, Compressed Air, etc.
Ability to repair or replace mechanical equipment: Motors, Pulleys, Belts, Valves, Bearings, Gearboxes, Piping, etc.
Experience navigating / entering information and notes in computer maintenance management system.
Physical Requirements:
Ability to stand, walk, bend, push, pull, lift, carry repetitively.
Lift 50 lbs to waist high.
Periodically work in an environment where dust is present (pigment) with use of a dust mask / respirator.
Handle exposure to outside environment with hot or cold temperatures.
Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2026-05-24 22:10:55
-
JOB DESCRIPTION
The maintenance mechanic supports production efficiencies by ensuring repair and preventive maintenance of industrial manufacturing equipment and plant facilities.
Opportunities exists for advanced training in manufacturing maintenance: thermography, vibration analysis, ultrasound, precision alignment.
Job Responsibilities:
Respond to urgent problems with equipment or facilities.
Execute assigned work orders of installing new equipment, repair/replace malfunctioning components, or preventive maintenance activities.
Document tasks by filling out forms.
Troubleshoot equipment failures.
Interact with production personnel to diagnose issues with the ability to decide course of action.
Follow safety protocols and environmental regulations.
Qualifications:
High School diploma or GED and completion of formal certified training program with completion certificates and a minimum 5 years of experience in an industrial manufacturing setting.
Able to read and interpret procedures to execute work tasks.
Understanding of basic OSHA safety standards for general industry.
Mechanical aptitude: using tools and measuring devices, basic understanding of piping, rotating parts, pneumatic.
hydraulic systems, and mechanical systems with panel controls.
Must be a team player and model the Values and Expectations of the organization and it's parent company.
Desired Skills and Experience:
Experience with chemicals: hazardous handling, waste, or spill management procedures.
Worked with liquid systems: pumps, mixers, agitators, valves, filters.
Familiar with solids or powder conveying, milling, packaging, filtering.
Understanding of plant utilities: Boilers, Heaters, Steam, Chilled Water, Compressed Air, etc.
Ability to repair or replace mechanical equipment: Motors, Pulleys, Belts, Valves, Bearings, Gearboxes, Piping, etc.
Experience navigating / entering information and notes in computer maintenance management system.
Physical Requirements:
Ability to stand, walk, bend, push, pull, lift, carry repetitively.
Lift 50 lbs to waist high.
Periodically work in an environment where dust is present (pigment) with use of a dust mask / respirator.
Handle exposure to outside environment with hot or cold temperatures.
Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2026-05-24 22:09:50
-
Join a team designing and testing advanced wireline electronic tools used in well site operations for oil and gas production.
Your role
Test electronic circuits and sub-assemblies manual and automated.
Fault-find to component level using oscilloscopes, DVMs, etc.
Perform electrical safety checks, Megger and flash tests.
Support occasional electronics assembly and give testing feedback
Contribute to a culture of safety and continuous improvement
What you will need
Apprenticeship, HNC or equivalent in electronics
Prior experience in electronics testing
Solid understanding of circuit theory and fault-finding techniques ....Read more...
Type: Permanent Location: Liverpool, England
Start: ASAP
Duration: Permanent
Salary / Rate: £32000 - £35000 Per Annum None
Posted: 2026-05-23 20:28:22
-
The role involves maintaining, servicing, and repairing a range of equipment including chillers, heaters, HVAC systems, boilers, heat exchangers, and process cooling units.
Key Responsibilities
Attend customer sites for maintenance, breakdowns, warranty, hire, and commissioning work
Diagnose and repair equipment using hand tools, diagnostic software, and blueprints
Build strong customer relationships and act as a trusted technical contact
Work closely with Service Desk, Sales, and Operations to share insights and drive improvements
Report on completed work orders and ensure accurate records in CRM systems
Skills and Experience
Experience in a service or field-based technician role
Strong customer service and communication skills
Ability to troubleshoot and solve technical problems
UK driving licence and willingness to cover nationwide sites ....Read more...
Type: Permanent Location: Southampton, England
Start: ASAP
Duration: Permanent
Salary / Rate: £35000 - £45000 Per Annum None
Posted: 2026-05-23 14:17:25
-
JOB DESCRIPTION
As our Control Systems Tech, you're there to apply electrical theory and related knowledge to test and modify developmental or operational electrical machinery and electrical control equipment and circuitry in industrial or laboratory environments by repairing, testing, adjusting, or installing electronic equipment, such as industrial controls, circuit boards, and switches; and reprogramming CNC and PLC controls.
Solving challenges is the very foundation of who we are.
After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint.
When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution.
Today, that discovery is Rust-Oleum Corporation.
The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today.
When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting-edge, durable and innovative products in the industry.
Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry.
Here is what you can expect:
Maintain current electrician's license or identification card to meet governmental regulations.
Connect wires to circuit breakers, transformers, or other components.
Repair or replace wiring, equipment, and fixtures, using hand tools and power tools
Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools.
Test electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices such as ohmmeters, voltmeters, and oscilloscopes, to ensure compatibility and safety of system.
Use a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment including oscilloscopes, ammeters, and test lamps.
Plan layout and installation of electrical wiring, equipment and fixtures, based on job specifications and local codes.
Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance with codes.
Diagnose malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem.
Operate and maintain high and low-pressure boilers
Operation and maintain air cooled chillers.
Operate various air handling systems, including process
Perform preventative maintenance on various systems
Perform air balance calculation on air handling systems
Diagnosis and troubleshoot
Steam Boiler systems
HVAC systems
Process Ventilation and ControlsRust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.
Required Experience:
High school diploma or GED certificate
Certified experience in HVAC and or Boiler Operation.
5 years experience in pipe fitting, welding and fabrication.
Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person.
Maintain a good record of attendance and punctuality.
Learn all manual tasks performed within the department.
Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures.
Treat people with dignity and respect.
Conduct all business with integrity.
Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities.
Follow all safety procedures and company policies.
Shift: 6am -6:15 pm; 2-2-3 shift rotation
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.
This is a Non-Exempt position.
Salary Range: $31.58 - $42.68Apply for this ad Online! ....Read more...
Type: Permanent Location: Hagerstown, Maryland
Posted: 2026-05-23 14:09:59
-
JOB DESCRIPTION
As our Control Systems Tech, you're there to apply electrical theory and related knowledge to test and modify developmental or operational electrical machinery and electrical control equipment and circuitry in industrial or laboratory environments by repairing, testing, adjusting, or installing electronic equipment, such as industrial controls, circuit boards, and switches; and reprogramming CNC and PLC controls.
Solving challenges is the very foundation of who we are.
After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint.
When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution.
Today, that discovery is Rust-Oleum Corporation.
The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today.
When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting-edge, durable and innovative products in the industry.
Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry.
Here is what you can expect:
Maintain current electrician's license or identification card to meet governmental regulations.
Connect wires to circuit breakers, transformers, or other components.
Repair or replace wiring, equipment, and fixtures, using hand tools and power tools
Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools.
Test electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices such as ohmmeters, voltmeters, and oscilloscopes, to ensure compatibility and safety of system.
Use a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment including oscilloscopes, ammeters, and test lamps.
Plan layout and installation of electrical wiring, equipment and fixtures, based on job specifications and local codes.
Inspect electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance with codes.
Diagnose malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem.
Operate and maintain high and low-pressure boilers
Operation and maintain air cooled chillers.
Operate various air handling systems, including process
Perform preventative maintenance on various systems
Perform air balance calculation on air handling systems
Diagnosis and troubleshoot
Steam Boiler systems
HVAC systems
Process Ventilation and ControlsRust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.
Required Experience:
High school diploma or GED certificate
Certified experience in HVAC and or Boiler Operation.
5 years experience in pipe fitting, welding and fabrication.
Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person.
Maintain a good record of attendance and punctuality.
Learn all manual tasks performed within the department.
Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures.
Treat people with dignity and respect.
Conduct all business with integrity.
Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities.
Follow all safety procedures and company policies.
Shift: 6am -6:15 pm; 2-2-3 shift rotation
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.
This is a Non-Exempt position.
Salary Range: $31.58 - $42.68Apply for this ad Online! ....Read more...
Type: Permanent Location: Hagerstown, Maryland
Posted: 2026-05-23 14:09:57
-
JOB DESCRIPTION
As our Mechanic at Ready-Seal, Weatherford, TX you will be tasked to keep machines, mechanical equipment, or the structure of the facility in repair by Pipe fitting; boiler making; insulating; welding; machining; carpentry; repairing electrical or mechanical equipment; installing, aligning, and balancing new equipment; and repairing buildings, floors, or stairs.
Solving challenges is the very foundation of who we are.
After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint.
When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution.
Today, that discovery is Rust-Oleum Corporation.
The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today.
When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry.
Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry.
Here's what you can expect every day:
Repair or replace defective equipment parts, using hand tools and power tools, and reassemble equipment.
Perform routine preventive maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, or the physical condition of buildings does not deteriorate.
Follow checklists to inspect drives, motors, and belts, check fluid levels, replace filters, or perform other maintenance actions.
Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices.
Assemble, install or repair wiring, electrical and electronic components, pipe systems, machinery, and equipment.
Diagnose mechanical problems and determine how to correct them, checking blueprints, repair manuals, and parts catalogs as necessary.
Inspect, operate, and test machinery and equipment to diagnose machine malfunctions.
Record type and cost of maintenance or repair work.
Clean and lubricate shafts, bearings, gears, and other parts of machinery.
Dismantle devices to access and remove defective parts, using hoists, cranes, hand tools, and power tools.
Required Skills:
3+ years of maintenance experience in manufacturing environment; preferably in chemical/paint manufacturing
High School Diploma or equivalent
Must have expertise in packaging equipment, plumbing, and pipefitting, with skills in electrical work and instrument calibration considered a definite plus
Demonstrated ability to diagnose and troubleshoot complex packaging and material-handling equipment is required
Ability to do basic math.
Accurately enter and retrieve computer data.
Ability to operate machinery
Ability to solve problems in a team environment.
Active participation in our Continuous Improvement Process.
Ability to consistently lift 50 pounds.
Willing to work overtime as required.
Additional Consideration Given to Those With:
Exposure to quality programs
Paint/Coatings/chemical industry knowledge or experience
Experience with a continuous process discipline such as Six Sigma/Lean/TQM manufacturing environment.
Previous experience with safety programsRust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Weatherford, Texas
Posted: 2026-05-22 22:09:55
-
We have an exciting opportunity for an Electrical Technician, competent at soldering, crimping and general wiring skills
Responsibilities
Perform soldering, crimping, and general wiring tasks for the installation, maintenance, and repair of electrical systems and downhole electronics equipment.
Conduct inspections and identify workmanship issues in downhole electronics equipment and processes.
Collaborate with engineers, electricians, and other team members to plan and execute electrical projects related to oil and gas operations.
Read and interpret electrical schematics, blueprints, and technical drawings specific to the oil and gas industry.
Requirements
High school diploma or equivalent: technical certification or associate degree in Electrical Technology or a related field is preferred.
Proficiency in soldering, crimping, and general wiring techniques.
Familiarity with electrical codes, regulations, and safety guidelines specific to oil and gas operations.
Experience working with downhole electronics equipment and processes ....Read more...
Type: Permanent Location: Stonehouse, England
Start: ASAP
Duration: Permanent
Salary / Rate: £28000 - £36000 Per Annum None
Posted: 2026-05-22 15:25:19
-
Facilities Engineer required for a high tech Aerospace manufacturing site to perform building and equipment maintenance, corrective repairs and modifications to the Production Plant.
You will be responsible for applying fixes to productive equipment in an office environment and precision engineering Research and design facility containing hazardous chemicals and high pressure gas systems.
The ideal candidate will have a very practical attitude and experience of building maintenance tasks in various fields, e.g.
carpentry, electrical, HVAC (heating, ventilation, and air conditioning), plumbing, compressor and boiler maintenance, site vehicle upkeep, machine shop fabrication including welding.
You will have
Plumbing, carpentry and fabrication experience.
Hand and electrical tools understanding.
Machine shop equipment knowledge, lathes, band / chop saws, pillar drills, grinders etc.
Welding and fabrication skills, City and Guilds Level 2 minimum, Level 3 preferred, or similar structural welding qualification.
ASME certification would be an advantage.
Basic working knowledge of PC applications, such as use of Word and Excel.
Experience in a facilities maintenance or engineering fabrication environment.
Role will involve
General site fixes, repairs and maintenance activities.
Installing new appliances and equipment.
Site project works, such as new test and productions facilities installations and commissioning.
Fabrication and welding.
Liaising with, arrange and managing external contractors.
Inspecting, maintaining and troubleshooting equipment and systems (e.g.
ventilation).
Check site control panels and electrical wiring to identify issues.
Provide and assemble office and production area furniture, shelving, racking, as required.
Upkeep of site vehicles.
....Read more...
Type: Permanent Location: Aylesbury, England
Start: ASAP
Duration: Permanent
Salary / Rate: £35000 - £45000 Per Annum None
Posted: 2026-05-22 13:46:21
-
We are looking for a Maintenance Engineer to join a cutting-edge aerospace manufacturing facility.
Your role will encompass the maintenance, repairs, and enhancements of the production plant, covering both building and equipment.
Your responsibilities will involve addressing issues with office-based equipment and maintaining precision engineering research and design facilities, which include hazardous chemicals and high-pressure gas systems.
The ideal candidate should possess a pragmatic mindset and have practical experience in welding and a variety of maintenance areas, including carpentry, electrical work, HVAC systems, plumbing, compressor and boiler maintenance, vehicle upkeep, and machine shop fabrication.
You should have experience in:
Plumbing, carpentry, and fabrication
Familiarity with hand and electrical tools
Knowledge of machine shop equipment like lathes, band/chop saws, pillar drills, and grinders
Welding and fabrication skills, preferably holding at least a City and Guilds Level 2 certification, with Level 3 or similar structural welding qualifications being advantageous.
ASME certification is a plus.
Previous experience in facilities maintenance or engineering fabrication settings
....Read more...
Type: Permanent Location: Aylesbury, England
Start: ASAP
Duration: Permanent
Salary / Rate: £35000 - £45000 Per Annum None
Posted: 2026-05-22 13:41:00
-
Propulsion Test Engineer with mechanical fitting expertise required.
This position involves overseeing the design implementation, conducting Hot Fire Testing programs.
Key Responsibilities
Support in test activities across all hot fire and environmental test facilities.
Ensure comprehensive understanding and knowledge of all aspects of the firing sites, including site preparation, fuel and oxidiser handling, pressure systems, instrumentation, control systems, space thruster theory, steam boiler operation, data analysis, site and system safety.
Develop test, maintenance, and setup procedures for all test activities.
Requirements
Proficiency in mechanical fitting, preferably attained through completion of an apprenticeship or relevant experience within an engineering-oriented environment.
Ideally holds qualifications equivalent to a graduate-level course in a related engineering field from OU or similar institutions.
Must have undergone at least Level 4 training on the ....Read more...
Type: Permanent Location: Aylesbury, England
Start: ASAP
Duration: Permanent
Salary / Rate: £46000 - £52000 Per Annum None
Posted: 2026-05-22 13:40:56
-
Hot Fire Test Engineer required with experience of COMAH controlled testing of Firing engines using propellants.
You will work within a Test department of a space thruster test facility on Hot Fire Testing programmes including: site preparation and maintenance, fuel and oxidiser handling, pressure systems, instrumentation, control systems, space thruster theory, steam boiler operation, data analysis, site and system safety, etc.
This is a fantastic opportunity to join an exciting and rapidly growing organisation at the cutting edge of Aerospace and Space Research, Design and Development. ....Read more...
Type: Permanent Location: Aylesbury, England
Start: ASAP
Duration: Permanent
Salary / Rate: £35000 - £45000 Per Annum None
Posted: 2026-05-22 13:38:51
-
Hot Fire Space Thruster Test Engineer required join a very busy space thruster test facility focusing on Hot Fire Testing programmes.
The ideal candidate will understand space thruster theory particularly the ground test of thrusters for the design and manufacture of liquid propellant and high pressure gas feed systems.
You will have an input to Research and Development and other space propulsion related activities so need to be proficient in analysing and assessing test data including collation and analysis then presentation graphs, tables, etc.
Requirements
Space thruster Knowledge
Understand propellant MIL spec analysis, Military Standard Propellants
Chemical laboratory techniques and processes
Mechanical fitter/practical engineering skills preferably gained from an apprenticeship or from within an engineering related organization.
Responsibilities
Site preparation and maintenance
Fuel and oxidiser handling
Pressure systems
Instrumentation
Control systems
Space thruster theory
Steam boiler operation
Data analysis
Site and system safety ....Read more...
Type: Permanent Location: Aylesbury, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £55000 Per Annum None
Posted: 2026-05-22 13:37:42
-
We are seeking a proactive and detail-oriented individual to join our team as a Test Technician.
In this role, you will provide essential support to lead Test Engineers in various tasks related to site preparation, maintenance, and testing activities.
Your responsibilities will include but are not limited to:
Assisting in site preparation and maintenance tasks
Conducting pressure and control systems checks
Operating mechanical and steam vacuum systems
Performing instrumentation calibrations
Maintaining and operating steam boilers
Operating high-pressure gas and fluidic systems
Utilising electrical and electronic measurement and testing equipment
Skills and Behavioural Competencies:
Degree in Aerospace, Mechanical or Electrical Engineering, or equivalent
Experience working with high-pressure gas systems
Familiarity with electronics and High Voltage equipment
....Read more...
Type: Permanent Location: Aylesbury, England
Start: ASAP
Duration: Permanent
Salary / Rate: £42000 - £48000 Per Annum None
Posted: 2026-05-22 13:33:37
-
Mechanical Fitter required to work as a Space thruster Test Technician supporting Hot Fire Space Propulsion Testing programmes.
The successful application will work with Test Engineers on site preparation, propellant handling, propellant sampling, pressure control systems checks, mechanical and steam vacuum systems, instrumentation calibrations, steam boiler operation also the collation and review of test data.
There will be extensive work on high pressure gas and fluidic systems including interpretation and understanding of Piping and Instrumentation Diagrams and the use of electrical and electronic measurement and testing equipment.
You will be working with satellite flight hardware, the preparation of space flight engines for test.
Including instrumentation, installation on to the test stand, removal post hot fire test, and subsequent engine decontamination activities, etc.
....Read more...
Type: Permanent Location: Aylesbury, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £48000 Per Annum None
Posted: 2026-05-22 13:31:32
