-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and offers constructive criticisms relative to variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Consult with Main Lab chemist on products more than 10% out of product specifications Upon approval of product record data onto Quality Control car and enter information into computer data base Consult QC manual for specific requirements for product analysis of production batches and customers special requirements Calibrate QC equipment as required Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude. Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-05-30 22:09:20
-
JOB DESCRIPTION
As our Production Supervisor you will be there to supervise the shift to manufacture paint and related products.
Solving challenges is the very foundation of who we are.
After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint.
When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution.
Today, that discovery is Rust-Oleum Corporation.
The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today.
When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry.
Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry.
Here's what you can expect every day:
Ensure schedule adherence and quality standards are met.
Provide direction to associates in Production Dept.
Maintain employee records, Kronos/Payroll, corrective action, warnings, etc.
Adhere to company policies, Federal, State Local requirement and ISO Standards.
Ensure all operations are in compliance with all procedures, rules and regulations.
Perform routine inspection on all production activities assuring that quality standards are met.
Document training of all associates on new procedures and equipment.
Keep employees trained and well informed on new processes.
Work with Maintenance Manager and Mechanics on all equipment problems, change-overs and issues concerning safety in all departments.
Oversee shift clean up tasks, communicate safety and processing concerns as well as issues with regulatory compliance.
Communicate results/ concerns/ issues with Managers, Purchasing and Production Scheduler.
Ensure shift to shift hand-off is completed and problems are addressed via email to Production Manager and other shifts.
Accomplish related results as assigned.
Required Experience:
Associate degree required; BS in an Engineering or Business discipline strongly preferred or commensurate experience.
Minimum of 3+ years of supervisory experience in a manufacturing environment; preferably in chemical/paint manufacturing.
A proven change agent with demonstrated ability to supervise and lead a diverse group of associates.
Train and Coordinate teams to achieve high levels of productivity, quality and safety performance.
Good written and verbal communication skills.
Good computer skills with working knowledge of MS Office packages, SAP experience preferred.
Proven abilities to successfully drive continuous improvement, manage multiple priorities and multitask.
Ability to work well with other peer groups.
Knowledge of industrial safety regulations, BRI, 5S Housekeeping and Lean Manufacturing.
Knowledge of local, state and federal regulations.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Attleboro, Massachusetts
Posted: 2026-05-30 14:09:46
-
JOB DESCRIPTION
Solving challenges is the very foundation of who we are.
After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint.
When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution.
Today, that discovery is Rust-Oleum Corporation.
The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today.
When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry.
Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry.
As our Material Handler, you will work in our plant to pick orders.
We can't ship without you.
Every day you will work alongside a hardworking and fast-paced team to select orders from the warehouse floor and place them on the correct pallet.
To thrive you must be prepared to lift packages of 50 pounds repeatedly and always think safety first.
You'll be someone your team can rely on to make sure our orders are right before they're in route to our customers.
As our Material Handler, you don't need experience but you do need strong character.
What does that mean to us?
You pay attention to details because you care as much about hitting production goals as accuracy on your pallet.
Safety matters.
When you see something, you'll say something to a teammate to make sure that everyone leaves as they come.
You'll show up.
We've built a team you can rely on, and we trust each other to show up every day. Required Experience:
1+ years of related experience preferred.
High school diploma or GED.
Must be able to work above average overtime and flexible hours.
Strong communication and interpersonal skills; ability to read, write, speak, and understand English.
Appropriate forklift and comparable equipment operating skills.
Ability to lift 50 lbs.
repeatedly for extended periods.
Shift: 6am-6:30pm; 2-2-3 shift rotation (continuous operations schedule)
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.
Internal Applicants: If you have been in your current position for one year (unless waived by your Manager), and meet the position requirements, you are welcome to apply for this position.
Please apply in Oracle on Requisition 13803 under 'Current Jobs'.Apply for this ad Online! ....Read more...
Type: Permanent Location: Kenosha, Wisconsin
Posted: 2026-05-30 14:09:46
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Production Operator starts, troubleshoots, and operates manufacturing equipment safely.
There are three Production Operator levels (I, II, & III).
The level will be determined by experience, ability to assume various roles on the plant floor, and demonstrated ability to independently troubleshoot and problem-solve machine issues resulting in efficient cycles and minimal downtime.
The Production Operator will operate production equipment, including industrial blenders, in accordance with the established production schedule.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform work in a safe manner by following all written and verbally communicated safety rules and procedures.
Follow standard work procedures to operate and maintain assigned machine(s).
Routinely meet or exceed production output rates per standards.
Ensure product meets certain tolerances and specifications.
Perform routine inspections per quality standards.
Understand production instructions.
Maintain accurate paperwork.
Inspects equipment, structures, and materials to identify problems or defects prior to production to ensure a clean, clear and safe work environment.
Reads and follows work orders and formulas to meet production specifications and schedules.
Examines materials, ingredients, or product per quality standards.
Weighs or measures materials, ingredients, and products per requirements.
Adds and mixes raw materials according to specifications.
Transfers materials, supplies, and products between work areas.
Discharges blenders of powder when necessary.
Ensures quality and conformity of blended products to meet standards.
Ensures equipment is set-up, cleaned, sanitized, and operating properly before, after and between runs.
Completes cleaning logs and notifies quality control for hygiene testing.
Records operational and production data on specified forms/production documents.
Reports malfunctions to a supervisor and confirms proactive and routine maintenance.
Conducts on-going assessment of quality control and operational procedures.
EDUCATION REQUIREMENT: No formal education required.
EXPERIENCE REQUIREMENT: No prior experience or training.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
ADDITIONAL INFORMATION:
Ability to function effectively in a team setting.
Ability to multi-task while maintaining attention to detail.
Demonstrates reliability, flexibility, and dependability
Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage.
Demonstrates accepted ethical and professional business behavior.
Executes ISO authority and responsibility.
Completes and maintains all required training.
Reports suspected violations including those of a business associate.
Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2026-05-30 14:09:46
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Team Leader (Manufacturing) is proficient in all areas of production and efficiently & correctly performs all duties in addition to more complex maintenance and continuous improvement.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Works under minimal supervision
Adjusts machines to achieve production goals
Collaborates with machine operators in production process
Assists in carrying out production growth strategy
Troubleshoots complex processing problems with little or no assistance
Actively participates in identifying and implementing continuous improvement initiatives
Determines priorities and creates procedures to meet objectives of the plant
Ensures maintenance is completed according to Preventative Maintenance Plan
Cross trains on all production areas in the facility (i.e.
safety, production, equipment)
Sets production schedule based on plant and customer needs utilizing factors such as lead time and manufacturing efficiency
Supports and validates the work of machine operators by answering questions, preparing production lines, and providing general direction
EDUCATION REQUIREMENT: No formal education required.
EXPERIENCE REQUIREMENT: Four to seven years' related experience and/or training.
CERTIFICATES, LICENSES, REGISTRATIONS:
Forklift Certification
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Proficient in Windows and MS Office products (Word, Excel, & Outlook)
Excellent organizational and communication skills (both written and verbal)
Positive team player
Knowledge of area operations and related safe work practices/procedures and demonstrated ability to coordinate work activities.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2026-05-30 14:09:26
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Production Operator starts, troubleshoots, and operates manufacturing equipment safely.
There are three Production Operator levels (I, II, & III).
The level will be determined by experience, ability to assume various roles on the plant floor, and demonstrated ability to independently troubleshoot and problem-solve machine issues resulting in efficient cycles and minimal downtime.
The Production Operator will operate production equipment, including industrial blenders, in accordance with the established production schedule.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform work in a safe manner by following all written and verbally communicated safety rules and procedures.
Follow standard work procedures to operate and maintain assigned machine(s).
Routinely meet or exceed production output rates per standards.
Ensure product meets certain tolerances and specifications.
Perform routine inspections per quality standards.
Understand production instructions.
Maintain accurate paperwork.
Inspects equipment, structures, and materials to identify problems or defects prior to production to ensure a clean, clear and safe work environment.
Reads and follows work orders and formulas to meet production specifications and schedules.
Examines materials, ingredients, or product per quality standards.
Weighs or measures materials, ingredients, and products per requirements.
Adds and mixes raw materials according to specifications.
Transfers materials, supplies, and products between work areas.
Discharges blenders of powder when necessary.
Ensures quality and conformity of blended products to meet standards.
Ensures equipment is set-up, cleaned, sanitized, and operating properly before, after and between runs.
Completes cleaning logs and notifies quality control for hygiene testing.
Records operational and production data on specified forms/production documents.
Reports malfunctions to a supervisor and confirms proactive and routine maintenance.
Conducts on-going assessment of quality control and operational procedures.
EDUCATION REQUIREMENT: No formal education required.
EXPERIENCE REQUIREMENT: No prior experience or training.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
ADDITIONAL INFORMATION:
Ability to function effectively in a team setting.
Ability to multi-task while maintaining attention to detail.
Demonstrates reliability, flexibility, and dependability
Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage.
Demonstrates accepted ethical and professional business behavior.
Executes ISO authority and responsibility.
Completes and maintains all required training.
Reports suspected violations including those of a business associate.
Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly.
BENEFITS:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2026-05-30 14:09:18
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Production Operator starts, troubleshoots, and operates manufacturing equipment safely.
There are three Production Operator levels (I, II, & III).
The level will be determined by experience, ability to assume various roles on the plant floor, and demonstrated ability to independently troubleshoot and problem-solve machine issues resulting in efficient cycles and minimal downtime.
The Production Operator will operate production equipment, including industrial blenders, in accordance with the established production schedule.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform work in a safe manner by following all written and verbally communicated safety rules and procedures.
Follow standard work procedures to operate and maintain assigned machine(s).
Routinely meet or exceed production output rates per standards.
Ensure product meets certain tolerances and specifications.
Perform routine inspections per quality standards.
Understand production instructions.
Maintain accurate paperwork.
Inspects equipment, structures, and materials to identify problems or defects prior to production to ensure a clean, clear and safe work environment.
Reads and follows work orders and formulas to meet production specifications and schedules.
Examines materials, ingredients, or product per quality standards.
Weighs or measures materials, ingredients, and products per requirements.
Adds and mixes raw materials according to specifications.
Transfers materials, supplies, and products between work areas.
Discharges blenders of powder when necessary.
Ensures quality and conformity of blended products to meet standards.
Ensures equipment is set-up, cleaned, sanitized, and operating properly before, after and between runs.
Completes cleaning logs and notifies quality control for hygiene testing.
Records operational and production data on specified forms/production documents.
Reports malfunctions to a supervisor and confirms proactive and routine maintenance.
Conducts on-going assessment of quality control and operational procedures.
EDUCATION REQUIREMENT: No formal education required.
EXPERIENCE REQUIREMENT: No prior experience or training.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
ADDITIONAL INFORMATION:
Ability to function effectively in a team setting.
Ability to multi-task while maintaining attention to detail.
Demonstrates reliability, flexibility, and dependability
Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage.
Demonstrates accepted ethical and professional business behavior.
Executes ISO authority and responsibility.
Completes and maintains all required training.
Reports suspected violations including those of a business associate.
Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2026-05-30 14:09:16
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Production Operator starts, troubleshoots, and operates manufacturing equipment safely.
There are three Production Operator levels (I, II, & III).
The level will be determined by experience, ability to assume various roles on the plant floor, and demonstrated ability to independently troubleshoot and problem-solve machine issues resulting in efficient cycles and minimal downtime.
The Production Operator will operate production equipment, including industrial blenders, in accordance with the established production schedule.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform work in a safe manner by following all written and verbally communicated safety rules and procedures.
Follow standard work procedures to operate and maintain assigned machine(s).
Routinely meet or exceed production output rates per standards.
Ensure product meets certain tolerances and specifications.
Perform routine inspections per quality standards.
Understand production instructions.
Maintain accurate paperwork.
Inspects equipment, structures, and materials to identify problems or defects prior to production to ensure a clean, clear and safe work environment.
Reads and follows work orders and formulas to meet production specifications and schedules.
Examines materials, ingredients, or product per quality standards.
Weighs or measures materials, ingredients, and products per requirements.
Adds and mixes raw materials according to specifications.
Transfers materials, supplies, and products between work areas.
Discharges blenders of powder when necessary.
Ensures quality and conformity of blended products to meet standards.
Ensures equipment is set-up, cleaned, sanitized, and operating properly before, after and between runs.
Completes cleaning logs and notifies quality control for hygiene testing.
Records operational and production data on specified forms/production documents.
Reports malfunctions to a supervisor and confirms proactive and routine maintenance.
Conducts on-going assessment of quality control and operational procedures.
EDUCATION REQUIREMENT: No formal education required.
EXPERIENCE REQUIREMENT: No prior experience or training.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
ADDITIONAL INFORMATION:
Ability to function effectively in a team setting.
Ability to multi-task while maintaining attention to detail.
Demonstrates reliability, flexibility, and dependability
Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage.
Demonstrates accepted ethical and professional business behavior.
Executes ISO authority and responsibility.
Completes and maintains all required training.
Reports suspected violations including those of a business associate.
Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2026-05-30 14:09:15
-
JOB DESCRIPTION
As our Production Supervisor you will be there to supervise the shift to manufacture paint and related products.
Solving challenges is the very foundation of who we are.
After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint.
When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution.
Today, that discovery is Rust-Oleum Corporation.
The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today.
When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry.
Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry.
Here's what you can expect every day:
Ensure schedule adherence and quality standards are met.
Provide direction to associates in Production Dept.
Maintain employee records, Kronos/Payroll, corrective action, warnings, etc.
Adhere to company policies, Federal, State Local requirement and ISO Standards.
Ensure all operations are in compliance with all procedures, rules and regulations.
Perform routine inspection on all production activities assuring that quality standards are met.
Document training of all associates on new procedures and equipment.
Keep employees trained and well informed on new processes.
Work with Maintenance Manager and Mechanics on all equipment problems, change-overs and issues concerning safety in all departments.
Oversee shift clean up tasks, communicate safety and processing concerns as well as issues with regulatory compliance.
Communicate results/ concerns/ issues with Managers, Purchasing and Production Scheduler.
Ensure shift to shift hand-off is completed and problems are addressed via email to Production Manager and other shifts.
Accomplish related results as assigned.
Required Experience:
Associate degree required; BS in an Engineering or Business discipline strongly preferred or commensurate experience.
Minimum of 3+ years of supervisory experience in a manufacturing environment; preferably in chemical/paint manufacturing.
A proven change agent with demonstrated ability to supervise and lead a diverse group of associates.
Train and Coordinate teams to achieve high levels of productivity, quality and safety performance.
Good written and verbal communication skills.
Good computer skills with working knowledge of MS Office packages, SAP experience preferred.
Proven abilities to successfully drive continuous improvement, manage multiple priorities and multitask.
Ability to work well with other peer groups.
Knowledge of industrial safety regulations, BRI, 5S Housekeeping and Lean Manufacturing.
Knowledge of local, state and federal regulations.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Attleboro, Massachusetts
Posted: 2026-05-30 14:09:15
-
JOB DESCRIPTION
Solving challenges is the very foundation of who we are.
After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint.
When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution.
Today, that discovery is Rust-Oleum Corporation.
The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today.
When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry.
Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry.
As our Material Handler, you will work in our plant to pick orders.
We can't ship without you.
Every day you will work alongside a hardworking and fast-paced team to select orders from the warehouse floor and place them on the correct pallet.
To thrive you must be prepared to lift packages of 50 pounds repeatedly and always think safety first.
You'll be someone your team can rely on to make sure our orders are right before they're in route to our customers.
As our Material Handler, you don't need experience but you do need strong character.
What does that mean to us?
You pay attention to details because you care as much about hitting production goals as accuracy on your pallet.
Safety matters.
When you see something, you'll say something to a teammate to make sure that everyone leaves as they come.
You'll show up.
We've built a team you can rely on, and we trust each other to show up every day. Required Experience:
1+ years of related experience preferred.
High school diploma or GED.
Must be able to work above average overtime and flexible hours.
Strong communication and interpersonal skills; ability to read, write, speak, and understand English.
Appropriate forklift and comparable equipment operating skills.
Ability to lift 50 lbs.
repeatedly for extended periods.
Shift: 6am-6:30pm; 2-2-3 shift rotation (continuous operations schedule)
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.
Internal Applicants: If you have been in your current position for one year (unless waived by your Manager), and meet the position requirements, you are welcome to apply for this position.
Please apply in Oracle on Requisition 13803 under 'Current Jobs'.Apply for this ad Online! ....Read more...
Type: Permanent Location: Kenosha, Wisconsin
Posted: 2026-05-30 14:09:14
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Team Leader (Manufacturing) is proficient in all areas of production and efficiently & correctly performs all duties in addition to more complex maintenance and continuous improvement.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Works under minimal supervision
Adjusts machines to achieve production goals
Collaborates with machine operators in production process
Assists in carrying out production growth strategy
Troubleshoots complex processing problems with little or no assistance
Actively participates in identifying and implementing continuous improvement initiatives
Determines priorities and creates procedures to meet objectives of the plant
Ensures maintenance is completed according to Preventative Maintenance Plan
Cross trains on all production areas in the facility (i.e.
safety, production, equipment)
Sets production schedule based on plant and customer needs utilizing factors such as lead time and manufacturing efficiency
Supports and validates the work of machine operators by answering questions, preparing production lines, and providing general direction
EDUCATION REQUIREMENT: No formal education required.
EXPERIENCE REQUIREMENT: Four to seven years' related experience and/or training.
CERTIFICATES, LICENSES, REGISTRATIONS:
Forklift Certification
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Proficient in Windows and MS Office products (Word, Excel, & Outlook)
Excellent organizational and communication skills (both written and verbal)
Positive team player
Knowledge of area operations and related safe work practices/procedures and demonstrated ability to coordinate work activities.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2026-05-30 14:08:47
-
JOB DESCRIPTION
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Attend and understand daily onsite safety brief prior to the start of the WTI project.
Inspect and ensure safety of surroundings, equipment and tools and identify and discuss any safety concerns.
Execution of project tasks with knowledge of expected production rates, ensuring tools and materials are used safely and efficiently to complete the assigned project. Complete the project per the scope or work, design and specification of contract & engineering documents as directed by foreman.
Responsible to aid foreman in tracking and monitoring project inventory. Maintains highest quality on-site customer relations in projecting positive image. Has knowledge/understanding and performs work in compliance with all governmental rules and regulations affecting work sites and employees, i.e.
OSHA, DOT, EEO/Affirmative Action, EPA, etc. Provides management with earliest possible notification of real and potential job problems. Accepts responsibility for the care, custody, and use of company equipment, material, tools, and other assets as assigned by the WTI Commercial Foreman. Understands and executes proper material and equipment usage, maintenance, and storage. Perform any other duty and/or project as required or assigned by the WTI Foreman and/or Commercial Business Manager. Maintains ethical business conduct.
Job Requirements:
Masons & Tuckpointers Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Cold Applied Waterproofing Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $21 and $38.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Fort Lauderdale, Florida
Posted: 2026-05-30 14:08:43
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Production Operator starts, troubleshoots, and operates manufacturing equipment safely.
There are three Production Operator levels (I, II, & III).
The level will be determined by experience, ability to assume various roles on the plant floor, and demonstrated ability to independently troubleshoot and problem-solve machine issues resulting in efficient cycles and minimal downtime.
The Production Operator will operate production equipment, including industrial blenders, in accordance with the established production schedule.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform work in a safe manner by following all written and verbally communicated safety rules and procedures.
Follow standard work procedures to operate and maintain assigned machine(s).
Routinely meet or exceed production output rates per standards.
Ensure product meets certain tolerances and specifications.
Perform routine inspections per quality standards.
Understand production instructions.
Maintain accurate paperwork.
Inspects equipment, structures, and materials to identify problems or defects prior to production to ensure a clean, clear and safe work environment.
Reads and follows work orders and formulas to meet production specifications and schedules.
Examines materials, ingredients, or product per quality standards.
Weighs or measures materials, ingredients, and products per requirements.
Adds and mixes raw materials according to specifications.
Transfers materials, supplies, and products between work areas.
Discharges blenders of powder when necessary.
Ensures quality and conformity of blended products to meet standards.
Ensures equipment is set-up, cleaned, sanitized, and operating properly before, after and between runs.
Completes cleaning logs and notifies quality control for hygiene testing.
Records operational and production data on specified forms/production documents.
Reports malfunctions to a supervisor and confirms proactive and routine maintenance.
Conducts on-going assessment of quality control and operational procedures.
EDUCATION REQUIREMENT: No formal education required.
EXPERIENCE REQUIREMENT: No prior experience or training.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
ADDITIONAL INFORMATION:
Ability to function effectively in a team setting.
Ability to multi-task while maintaining attention to detail.
Demonstrates reliability, flexibility, and dependability
Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage.
Demonstrates accepted ethical and professional business behavior.
Executes ISO authority and responsibility.
Completes and maintains all required training.
Reports suspected violations including those of a business associate.
Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly.
BENEFITS:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2026-05-30 14:08:43
-
JOB DESCRIPTION
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Attend and understand daily onsite safety brief prior to the start of the WTI project.
Inspect and ensure safety of surroundings, equipment and tools and identify and discuss any safety concerns.
Execution of project tasks with knowledge of expected production rates, ensuring tools and materials are used safely and efficiently to complete the assigned project. Complete the project per the scope or work, design and specification of contract & engineering documents as directed by foreman.
Responsible to aid foreman in tracking and monitoring project inventory. Maintains highest quality on-site customer relations in projecting positive image. Has knowledge/understanding and performs work in compliance with all governmental rules and regulations affecting work sites and employees, i.e.
OSHA, DOT, EEO/Affirmative Action, EPA, etc. Provides management with earliest possible notification of real and potential job problems. Accepts responsibility for the care, custody, and use of company equipment, material, tools, and other assets as assigned by the WTI Commercial Foreman. Understands and executes proper material and equipment usage, maintenance, and storage. Perform any other duty and/or project as required or assigned by the WTI Foreman and/or Commercial Business Manager. Maintains ethical business conduct.
Job Requirements:
Masons & Tuckpointers Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Cold Applied Waterproofing Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $21 and $38.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Orlando, Florida
Posted: 2026-05-30 14:08:40
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Production Operator starts, troubleshoots, and operates manufacturing equipment safely.
There are three Production Operator levels (I, II, & III).
The level will be determined by experience, ability to assume various roles on the plant floor, and demonstrated ability to independently troubleshoot and problem-solve machine issues resulting in efficient cycles and minimal downtime.
The Production Operator will operate production equipment, including industrial blenders, in accordance with the established production schedule.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform work in a safe manner by following all written and verbally communicated safety rules and procedures.
Follow standard work procedures to operate and maintain assigned machine(s).
Routinely meet or exceed production output rates per standards.
Ensure product meets certain tolerances and specifications.
Perform routine inspections per quality standards.
Understand production instructions.
Maintain accurate paperwork.
Inspects equipment, structures, and materials to identify problems or defects prior to production to ensure a clean, clear and safe work environment.
Reads and follows work orders and formulas to meet production specifications and schedules.
Examines materials, ingredients, or product per quality standards.
Weighs or measures materials, ingredients, and products per requirements.
Adds and mixes raw materials according to specifications.
Transfers materials, supplies, and products between work areas.
Discharges blenders of powder when necessary.
Ensures quality and conformity of blended products to meet standards.
Ensures equipment is set-up, cleaned, sanitized, and operating properly before, after and between runs.
Completes cleaning logs and notifies quality control for hygiene testing.
Records operational and production data on specified forms/production documents.
Reports malfunctions to a supervisor and confirms proactive and routine maintenance.
Conducts on-going assessment of quality control and operational procedures.
EDUCATION REQUIREMENT: No formal education required.
EXPERIENCE REQUIREMENT: No prior experience or training.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
ADDITIONAL INFORMATION:
Ability to function effectively in a team setting.
Ability to multi-task while maintaining attention to detail.
Demonstrates reliability, flexibility, and dependability
Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage.
Demonstrates accepted ethical and professional business behavior.
Executes ISO authority and responsibility.
Completes and maintains all required training.
Reports suspected violations including those of a business associate.
Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2026-05-30 14:08:38
-
Homologation & Compliance Manager - Automotive
Are you an experienced Vehicle Homologation & Compliance professional with a background in automotive manufacturing, vehicle conversion, or specialist vehicles? Do you have strong knowledge of vehicle type approval, Conformity of Production (CoP), and experience working with regulatory bodies such as the VCA?
This is an excellent opportunity to join a growing automotive manufacturing business where you will take ownership of all vehicle approvals, compliance, certification, and quality systems.
Working closely with Engineering and Production teams, you will play a key role in supporting new vehicle development, ensuring regulatory compliance, and helping drive the business forward.
This is a hands-on, highly influential role offering genuine long-term career development within a dynamic and expanding automotive environment.
Ideal Location South Yorkshire -Rotherham, Sheffield, Leeds, Bradford, Wakefield, Doncaster, Huddersfield, Barnsley, Chesterfield, Mansfield
Salary - £55K to £75K basic + 25 days basic annual leave + Pension + Package
Key Responsibilities
Lead all GB / UKNI Type Approval activities across vehicle programmes
Manage and develop Conformity of Production (CoP) systems
Act as the key contact for VCA and external regulatory bodies
Ensure compliance with all relevant UK and international automotive legislation
Support engineering and product development teams from a compliance perspective
Manage TÜV and external certification processes
Coordinate testing, technical documentation, and approval submissions
Maintain and develop ISO9001 Quality Management Systems
Conduct audits, manage corrective actions, and drive continuous improvement
Support Health & Safety compliance within manufacturing and workshop environments
Manage calibration systems, records, and equipment traceability
Train and support internal teams on compliance procedures and standards
Essential Skills & Experience
Proven experience in automotive homologation / vehicle type approval
Strong understanding of Conformity of Production (CoP)
Experience working with VCA or equivalent approval bodies
ISO9001 Quality Management Systems experience
Background within automotive manufacturing or engineering
To Register Your Interest:
To find out more about this role contact Robert Cox - Senior Recruitment Consultant at Glen Callum Associates Ltd by calling 07398 204832 or email a full up to date CV
Job Ref: 4352RC - Homologation & Compliance Manager - Automotive
Glen Callum Associates is committed to creating diverse and inclusive workplaces.
We welcome applications from all qualified candidates regardless of gender, age, ethnicity, disability, sexual orientation, or background.
We believe that a variety of perspectives makes a team stronger and a workplace better.
If you need any adjustments during the recruitment process, please let us know - we're here to support you. ....Read more...
Type: Permanent Location: Sheffield, England
Start: 30/06/2026
Salary / Rate: £55000 - £75000 per annum + 25 days basic annual leave + pension
Posted: 2026-05-30 08:00:15
-
JOB DESCRIPTION
DAP is hiring Graphic Design Intern for Summe 2026.
The intern will work under the mentorship of Art Director.
This summer internship is designed for a student seeking hands-on experience in a supportive, high-energy environment.
You won't just be watching from the sidelines; you will be a key contributor to meaningful creative work that supports our sales and marketing campaigns.
This is an opportunity to develop real-world skills, build your portfolio, and work alongside industry experts in a culture that values professional development and teamwork
Responsibilities
Brand Stewardship & Design: Leverage our brand guidelines to create consistent, high-quality visual content that reflects DAP's values.
Design and generate a wide variety of assets, including graphics, images, and presentation materials for print, digital and social media platforms.
Implement all new templates for sales kits across lines and sub-brands.
Collaborative Content Creation: Work closely with the design team to develop creative and strategic communications, ensuring allvisual content is adapted specifically for the home improvement and construction industry.
Creative Strategy: Contribute to creative brainstorming sessions and brand development initiatives.
Asset Management: Re-color and adjust photography to meet production standards.
Market Intelligence: Conduct market research to stay ahead of design trends in the CPG and home improvement sectors.
Operational Support: Provide general support as needed for day-to-day creative operations.
Requirements:
Major: Graphic Designing
Technically Proficient: Working knowledge of Adobe Creative Suite is required.
Knowledge of Adobe AI (Artificial Intelligence) features is a strong plus.
A Visual Communicator: You must have a portfolio demonstrating experience in graphic design, with a specific focus on digital and social media formats.
Professional & Collaborative: Excellent communication skills and the ability to work effectively in a team environment are essential.
You must be open to feedback and collaboration.
Driven & Reliable: We are looking for someone energetic, enthusiastic, and willing to learn.
You must be reliable, prepared, responsible, detail-oriented, and organized.
On-Site Availability: You must be able to work on-site for the majority of the internship to maximize collaboration and mentorship opportunities.
Industry Interest: An interest in CPG branding and the home improvement/construction industry is a plus.
Pay
$17 / hour
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world.
At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Baltimore, Maryland
Posted: 2026-05-29 22:10:05
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
The Design Engineer assesses project requirements, gathers technical field data, determines design requirements, selects appropriate equipment, and provides drafting of HVAC (Heating, Ventilation, and Air Conditioning) restoration projects.
This role combines engineering expertise with drafting skills to ensure that projects are planned and constructed effectively.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
• Conducts on-site visits and assessments to understand the specific scope and technical requirements of individual projects.
This includes evaluating existing HVAC systems, identifying issues or challenges, and testing equipment performance.
• Determines scope and designs solutions for HVAC restoration projects via site visits and coordination with owner/facility staff.
• Understands components and functions of existing mechanical systems being altered or renovated.
• Exercises control over design and production tasks to enable HVAC restoration projects.
• Drafts construction documents and generates specifications for HVAC restoration projects.
• Utilizes in-house estimating tools to create project budgets.
• Assists the sales team with scope reviews and support as needed.
• Creates, maintains, and improves drafting tools and templates.
• Determines the estimated cost of HVAC projects.
This includes calculating costs for labor, materials, equipment, subcontractors, and any other expenses associated with the project.
• Ensures a smooth transition from design to project execution, providing technical guidance and insights during and after construction.
• Other duties as assigned by the manager.
CERTIFICATES, LICENSES, REGISTRATIONS:
• Engineer Intern (EI) Certification
• Professional Engineer (PE) License is preferred
OTHER SKILLS AND ABILITIES:
• Bachelor's degree or equivalent experience.
• 5+ years of industry-specific experience.
• Experience with construction drafting in AutoCAD.
• EI certification with the ability to obtain a PE license preferred.
• Advanced Microsoft Office Suite knowledge preferred.
• Experience with a programming language (VBA, C#, etc.) preferred.
• Experience with cloud-based platforms (Pro-Core, E-Builder, iAuditor, etc.) preferred.
• Ability to travel out of state up to 50% of the time.
The salary range for applicants in this position generally ranges between $91,000 and $125,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Clearwater, Florida
Posted: 2026-05-29 22:10:05
-
JOB DESCRIPTION
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Attend and understand daily onsite safety brief prior to the start of the WTI project.
Inspect and ensure safety of surroundings, equipment and tools and identify and discuss any safety concerns.
Execution of project tasks with knowledge of expected production rates, ensuring tools and materials are used safely and efficiently to complete the assigned project. Complete the project per the scope or work, design and specification of contract & engineering documents as directed by foreman.
Responsible to aid foreman in tracking and monitoring project inventory. Maintains highest quality on-site customer relations in projecting positive image. Has knowledge/understanding and performs work in compliance with all governmental rules and regulations affecting work sites and employees, i.e.
OSHA, DOT, EEO/Affirmative Action, EPA, etc. Provides management with earliest possible notification of real and potential job problems. Accepts responsibility for the care, custody, and use of company equipment, material, tools, and other assets as assigned by the WTI Commercial Foreman. Understands and executes proper material and equipment usage, maintenance, and storage. Perform any other duty and/or project as required or assigned by the WTI Foreman and/or Commercial Business Manager. Maintains ethical business conduct.
Job Requirements:
Masons & Tuckpointers Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Cold Applied Waterproofing Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $21 and $38.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Fort Lauderdale, Florida
Posted: 2026-05-29 22:10:02
-
JOB DESCRIPTION
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Attend and understand daily onsite safety brief prior to the start of the WTI project.
Inspect and ensure safety of surroundings, equipment and tools and identify and discuss any safety concerns.
Execution of project tasks with knowledge of expected production rates, ensuring tools and materials are used safely and efficiently to complete the assigned project. Complete the project per the scope or work, design and specification of contract & engineering documents as directed by foreman.
Responsible to aid foreman in tracking and monitoring project inventory. Maintains highest quality on-site customer relations in projecting positive image. Has knowledge/understanding and performs work in compliance with all governmental rules and regulations affecting work sites and employees, i.e.
OSHA, DOT, EEO/Affirmative Action, EPA, etc. Provides management with earliest possible notification of real and potential job problems. Accepts responsibility for the care, custody, and use of company equipment, material, tools, and other assets as assigned by the WTI Commercial Foreman. Understands and executes proper material and equipment usage, maintenance, and storage. Perform any other duty and/or project as required or assigned by the WTI Foreman and/or Commercial Business Manager. Maintains ethical business conduct.
Job Requirements:
Masons & Tuckpointers Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Cold Applied Waterproofing Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $21 and $38.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Orlando, Florida
Posted: 2026-05-29 22:09:57
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
The Design Engineer assesses project requirements, gathers technical field data, determines design requirements, selects appropriate equipment, and provides drafting of HVAC (Heating, Ventilation, and Air Conditioning) restoration projects.
This role combines engineering expertise with drafting skills to ensure that projects are planned and constructed effectively.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
• Conducts on-site visits and assessments to understand the specific scope and technical requirements of individual projects.
This includes evaluating existing HVAC systems, identifying issues or challenges, and testing equipment performance.
• Determines scope and designs solutions for HVAC restoration projects via site visits and coordination with owner/facility staff.
• Understands components and functions of existing mechanical systems being altered or renovated.
• Exercises control over design and production tasks to enable HVAC restoration projects.
• Drafts construction documents and generates specifications for HVAC restoration projects.
• Utilizes in-house estimating tools to create project budgets.
• Assists the sales team with scope reviews and support as needed.
• Creates, maintains, and improves drafting tools and templates.
• Determines the estimated cost of HVAC projects.
This includes calculating costs for labor, materials, equipment, subcontractors, and any other expenses associated with the project.
• Ensures a smooth transition from design to project execution, providing technical guidance and insights during and after construction.
• Other duties as assigned by the manager.
CERTIFICATES, LICENSES, REGISTRATIONS:
• Engineer Intern (EI) Certification
• Professional Engineer (PE) License is preferred
OTHER SKILLS AND ABILITIES:
• Bachelor's degree or equivalent experience.
• 5+ years of industry-specific experience.
• Experience with construction drafting in AutoCAD.
• EI certification with the ability to obtain a PE license preferred.
• Advanced Microsoft Office Suite knowledge preferred.
• Experience with a programming language (VBA, C#, etc.) preferred.
• Experience with cloud-based platforms (Pro-Core, E-Builder, iAuditor, etc.) preferred.
• Ability to travel out of state up to 50% of the time.
The salary range for applicants in this position generally ranges between $91,000 and $125,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Clearwater, Florida
Posted: 2026-05-29 22:09:54
-
JOB DESCRIPTION
DAP is hiring Graphic Design Intern for Summe 2026.
The intern will work under the mentorship of Art Director.
This summer internship is designed for a student seeking hands-on experience in a supportive, high-energy environment.
You won't just be watching from the sidelines; you will be a key contributor to meaningful creative work that supports our sales and marketing campaigns.
This is an opportunity to develop real-world skills, build your portfolio, and work alongside industry experts in a culture that values professional development and teamwork
Responsibilities
Brand Stewardship & Design: Leverage our brand guidelines to create consistent, high-quality visual content that reflects DAP's values.
Design and generate a wide variety of assets, including graphics, images, and presentation materials for print, digital and social media platforms.
Implement all new templates for sales kits across lines and sub-brands.
Collaborative Content Creation: Work closely with the design team to develop creative and strategic communications, ensuring allvisual content is adapted specifically for the home improvement and construction industry.
Creative Strategy: Contribute to creative brainstorming sessions and brand development initiatives.
Asset Management: Re-color and adjust photography to meet production standards.
Market Intelligence: Conduct market research to stay ahead of design trends in the CPG and home improvement sectors.
Operational Support: Provide general support as needed for day-to-day creative operations.
Requirements:
Major: Graphic Designing
Technically Proficient: Working knowledge of Adobe Creative Suite is required.
Knowledge of Adobe AI (Artificial Intelligence) features is a strong plus.
A Visual Communicator: You must have a portfolio demonstrating experience in graphic design, with a specific focus on digital and social media formats.
Professional & Collaborative: Excellent communication skills and the ability to work effectively in a team environment are essential.
You must be open to feedback and collaboration.
Driven & Reliable: We are looking for someone energetic, enthusiastic, and willing to learn.
You must be reliable, prepared, responsible, detail-oriented, and organized.
On-Site Availability: You must be able to work on-site for the majority of the internship to maximize collaboration and mentorship opportunities.
Industry Interest: An interest in CPG branding and the home improvement/construction industry is a plus.
Pay
$17 / hour
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world.
At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Baltimore, Maryland
Posted: 2026-05-29 22:09:48
-
E3 Recruitment is looking to recruit an Aluminium Fabricator to join a well-established, leading architectural glazing manufacturer in Huddersfield.In this position, you will fabricate aluminium windows, doors, and curtain walling systems to precise specifications.This is a permanent position offering job security for an established, growing company with a strong order book and a busy year ahead.
What's in it for you as an Aluminium Fabricator:, Basic salary of up to £30,160 dependent on experience , Hours of work: Monday - Thursday 6am - 3pm (early finish Friday at 12pm), Full-time, permanent role (40 hours per week), Overtime paid at a premium of 1.5x and 2x, Location: Huddersfield, 28 days holiday increasing to 33 days , Job security and personal development within a market-leading manufacturing organisation.Duties of the Aluminium Fabricator:
Fabricating aluminium windows, doors, and curtain walling systems to precise specifications
Reading and interpreting technical drawings
Measuring, cutting, assembling, and finishing aluminium profiles
Using a range of hand and power tools
Working to production schedules while maintaining high standards of accuracy and quality.
Requirements of the Aluminium Fabricator:
Experience in aluminium fabrication - windows, doors, or curtain walling
Excellent attention to detail and a proactive, can-do attitude
The ability to work well under pressure and meet deadlines
Punctual, reliable, and eager to learn and develop new skills
Knowledge of profile systems is desirable; Reynaers, Technal, Cortizo or Senior.
If you want to be part of a successful, growing company, please apply now. ....Read more...
Type: Permanent Location: Huddersfield, England
Start: ASAP
Salary / Rate: Up to £30160.00 per annum + Dependent on Experience
Posted: 2026-05-29 15:59:26
-
All About UsReporting to the Vice President of Operations at the PNE, this role provides strategic leadership for all technical production and operations across PNE venues, delivering world-class support for concerts, festivals, trade shows, sporting events, and special events.Who we are…The Pacific National Exhibition is an iconic institution in BC, famous for bringing generations of people together to celebrate and build memories.
This 116-year-old, non-profit organization has an annual operating budget of over $70 million dollars and generates revenue through four activity streams: the 15 day annual summer Fair which averages more than 700,000 people annually, Playland amusement park which welcomes 400,000 guests annually including Fright Nights, and a busy year-round portfolio of events including concerts, trade shows and film, cultural and community events. In total we bring over 2 million people through the site each year.
The fourth activity stream is park care and facility maintenance. PNE is proud of the work it does at Hastings Park and has a vibrant team that is passionate about events, guest experience and delivering memorable experiences.At the PNE, we strive to create an environment that reflects our organization’s core values: Enthusiasm, Excellence and Evolution.
With a focus on these core values, we are committed to achieving our mission which is to “Deliver Memorable Experiences” for all who interact with the PNE whether it is our guests, our employees or the community.Reporting to the Vice President of Operations at the PNE, this role provides strategic leadership for all technical production and operations across PNE venues, delivering world-class support for concerts, festivals, trade shows, sporting events, and special events.Why join our Team?
Exhilarating and fun-loving cultureFlexible work environmentOpportunity for free or discounted tickets to shows, events, sports games, and much moreStaff discounts for Playland, The Fair, and Fright Nights, as well as all PNE Food StandsCompetitive compensation packageOpportunity to create lasting memories and friendships!
What will you do this year?In your role as Director, Production, your primary accountabilities will be to:Production Leadership & Oversight
Lead all technical production operations across PNE venues, including concerts, festivals, trade shows, sports, and special events.Supervise, schedule, and coordinate IATSE crews for load-ins, show calls, and load-outs.
And non-unionDevelop and enforce venue production policies, procedures, and safety protocols in compliance with WorkSafeBC standards.
Technical Systems Management
Oversee Maintenance, repair, and upgrade of all venue technical systems, including rigging, lighting, audio, video, digital screens, and power distribution infrastructure.Coordinate regular testing, documentation, and preventive maintenance programs to ensure reliability and compliance.Oversee in-house AV systems supporting small boardrooms, press conferences, and meeting spaces, including setup, troubleshooting, and vendor support.
Event Advancement & Execution
Serve as the primary technical production liaison for promoters, tour managers, resident tenants, and event producers.Advance all technical details, ensuring each event’s requirements are met efficiently and within venue capabilities.Develop comprehensive production schedules, crew calls, and technical documentation for all events.Provide on-site leadership during high-profile events, ensuring smooth coordination across departments.Maintain strong working relationships with preferred production vendors and suppliers for rigging, staging, lighting, sound, and video.Negotiate service agreements and pricing to ensure cost-effective, high-quality outcomes.Foster positive relationships with national and international concert promoters, touring productions, and event organizers to reinforce PNE’s reputation as a premier venue destination.Ensure both internal and external events have the proper sound management plans in place for their events and are compliant to the city sound bylaw. For some indoor and outdoor events the position will required to be onsite to manage sound levels with the promoter and the community relations team.
Financial Management
Prepare and present accurate technical production cost estimates for concerts, corporate events, and internal projects.Track, reconcile, and report on event technical production budgets and labor costs.Contribute to the development of annual department budgets and long-term capital investment planning for technical production systems.Partner with the Sales.
Events, Operations, and Guest Experience teams to ensure cohesive event delivery.Participate in pre-event planning and post-event debriefs to align production logistics with client expectations.Maintain clear communication with touring personnel, management, and staff to resolve technical and logistical challenges proactively.
What else?
Bachelor’s degree in Technical Theatre, Event Production, or a related field (or equivalent experience).Minimum of 10 years in live event or venue production, including at least 5 years in a leadership role overseeing multi-venue or arena-scale operations or touring management.Demonstrated experience managing concerts, sporting events, exhibitions, and large public gatherings.Proven experience working with IATSE or similar stagehand unions.Strong technical expertise in audio, lighting, video, rigging, and power systems.Strong leadership, communication, and interpersonal skills.Excellent budgeting, estimating, and financial management abilities.Proficiency in production and venue management software (e.g., AutoCAD, Vectorworks, VenueOps, Microsoft Office).Ability to multitask and manage high-pressure environments with professionalism and calm.Availability to work evenings, weekends, and holidays as required by the event schedule.Successful candidates must undergo a Criminal Record Check.
Who are you?
OrganizedMethodicalProactiveSkillful communicatorCritical thinkerCommitted to striving for excellence
Where and when to APPLY?Applications can be submitted via the PNE website at www.pne.ca/jobs and will be accepted until the role is filled.Preference will be given to candidates who submit their resume/cover letter before Sunday, March 01. We look forward to hearing from you!Additional InformationThe PNE's compensation offerings are in alignment with a pay-for-performance pay philosophy that recognizes individual, and teamwork performance.
The role is a permanent, full-time position with a typical salary range of $130,000 - $150,000 per annum. The starting salary will be based on the successful candidate’s competencies, including but not limited to knowledge, skills, experience, and internal pay structures.
As a part of the PNE's total compensation package, this position may be eligible for other benefits subject to program eligibility requirements. The PNE is proud to be an equal opportunity employer, committed to creating an inclusive workforce that reflects the diverse community we proudly serve.
All applicants will receive consideration for employment without regard to race, colour, national or ethnic origin, religion, sex, sexual orientation, gender identity or expression, disability, or age.
If you require any support or accommodations throughout any stage of the recruitment process, please contact the People & Culture Department at hr@pne.ca. ....Read more...
Type: Permanent Location: 2901 East Hastings St. Vancouver, British Columbia V5K5J1 Canada, Vancouver, Bri
Salary / Rate: £91.4k - 105.5k per year
Posted: 2026-05-29 15:39:18
-
Due to continued growth, this well-established manufacturing organisation is looking to increase their headcount by bringing in a sales executive on a permanent basis, offering genuine career development, growth and progression.Employing over 100 people across Leeds, this market-leading manufacturing organisation offers specialist welding and fabrication services, as well as their own range of bespoke equipment and machinery.This organisation is currently experiencing high levels of success and growth and has recently completed an acquisition, which will increase its market share whilst increasing its manufacturing output at its West Yorkshire production facilities.Their LEEDS-based facility is based just a few minutes from the M62 and M1 motorways, meaning the successful candidate will easily be able to commute from surrounding towns & cities, including Wakefield, Castleford, Pontefract, Bradford, Huddersfield, Halifax, Wetherby, Selby and Barnsley.Key Responsibilities of the Sales Executive
Focus on developing and expanding your account base while introducing the company's full product portfolio to new customers.
Re-engage dormant clients and rebuild valuable long-standing relationships.
Collaborate with the sales manager to support the delivery of the strategic business plan.
Attend internal meetings and networking events all across the UK.
Working Hours of the Sales Executive
Monday- Thursday: 08:30-17:00
Friday: 08:30-16:00
For the Sales Executive role, we are keen to receive applications from individuals who possess
A driven and ambitious attitude with a genuine passion for sales.
Confidence in cold calling and proactively engaging with new customers.
Strong IT skills with the ability to quickly learn new systems and processes.
Experience in similar roles such as Junior Sales Roles, Business Development Executive or Account Executives
In Return, the Sales Executive will receive:
Salary: £28,000-£31,000 Per Annum
Early finish on a Friday
Holiday Entitlement: 28 Days
Company Pension Scheme
If you are interested in the Sales Executive role, please click “APPLY NOW” Alternatively, please contact Ismail at E3 Recruitment. ....Read more...
Type: Permanent Location: Leeds, England
Start: ASAP
Salary / Rate: £28000 - £31000.00 per annum
Posted: 2026-05-29 15:39:05
