-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude.
All candidates are required to pass drug test and background check.Apply for this ad Online! ....Read more...
Type: Permanent Location: Westfield, Massachusetts
Posted: 2026-07-16 15:09:02
-
JOB DESCRIPTION
Tremco Incorporated is a leading manufacturer of products for the construction and new building maintenance markets and a fast-growing division of RPM.
Our Weatherproofing Technologies Division currently seeks a Commercial Construction Superintendent with a proven track record in running and supervising commercial construction projects to deliver projects on time and within budget. You will be responsible for jobsite safety, resolving project issues and problems, scheduling and providing coordination between subcontractors and owner operations, quality and affirming specifications are followed in accordance with Tremco standards, project costs and generating reports on project status, and ensuring owner satisfaction. This position requires 5-10 years' experience in commercial construction or 5 years as a foreman.
You must be able to keep project records and interface with owners, subcontractors, and Company management.
Travel is required. Additional duties will include participating in development and enforcement of jobsite safety plans, specifications, price estimates, schedules, and sales efforts as they affect the aforementioned projects.
Also, responsibilities will include Sales & Service Support, Field Resource & Customer Management communication as necessary.
Core understanding of General building standards knowledge, Scheduling, Shop drawing review.
OSHA 10 Hour Certification is required.
Deep understanding of all Construction Management tasks, understanding of Superintendent roles & responsibilities communications, Superior written, oral and digital communication skills, Able to create performance reporting
Computer Literacy: Email, web, MSWord, and MSExcel The hourly rate for applicants in this position generally ranges between $20 and $33.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Benefits: Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Altoona, Pennsylvania
Posted: 2026-07-16 15:09:01
-
JOB DESCRIPTION
DAP has an exciting opportunity for Machine Operators at our Baltimore Plant!
Our associates enjoy competitive pay in addition to a comprehensive benefits package that includes:
Pension Plan
401k with Company Match
Health/Dental/Vision Insurance
Paid Parental Leave
Stock Purchase Plan
...and much more! This position supports the plant's manufacturing operation by ensuring the various packaging and filling equipment within our dry products department runs smoothly and minimizes downtime.
Below ais the available shift schedule:
1st Shift (Monday to Thursday from 5:00 AM - 3:00 PM)Overtime is available/required.
Associates earn double-time pay for all hours worked in excess of 50 hours in your standard work week!
Responsibilities:
Operates a variety of packaging and filling lines including: placing of packaging on the line, monitoring the filling operation, packing-off finished product, performing quality checks and assisting in the cleaning and changeover of the line.
Assists in maintaining an accurate inventory by proper reporting of material usage, minimizing waste, reporting any spills, and ensuring all items per case and cases per pallet counts are accurate.
Utilize RF scanner and SAP system.
Maintain production logs to accurately record downtime/issues.
Completes all paperwork accurately.
Performs housekeeping duties to ensure a neat and orderly work area.
Abides by all departmental and plant safety rules.
Works in other areas as required by business needs.
Requirements:
Previous experience in a manufacturing environment
Must be able to lift up to 50 lbs.
regularly and stand for periods of up to 3 hours at a time
Must be able to team lift 70-100 lbs.
occasionally
Ability to climb steps/ladders
Ability to become a licensed DAP forklift driver
Must wear required PPE at all times throughout the shift (safety glasses, ear plugs, steel-toed shoes)
Excellent communication skills and ability to work well with others
Pay Rate:
$22.23/hr
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world.
At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Baltimore, Maryland
Posted: 2026-07-16 15:08:52
-
JOB DESCRIPTION
DAP has an exciting opportunity for Machine Operators at our Baltimore Plant!
Our associates enjoy competitive pay in addition to a comprehensive benefits package that includes:
Pension Plan
401k with Company Match
Health/Dental/Vision Insurance
Paid Parental Leave
Stock Purchase Plan
...and much more! This position supports the plant's manufacturing operation by ensuring the various packaging and filling equipment within our dry products department runs smoothly and minimizes downtime.
Below ais the available shift schedule:
1st Shift (Monday to Thursday from 5:00 AM - 3:00 PM)Overtime is available/required.
Associates earn double-time pay for all hours worked in excess of 50 hours in your standard work week!
Responsibilities:
Operates a variety of packaging and filling lines including: placing of packaging on the line, monitoring the filling operation, packing-off finished product, performing quality checks and assisting in the cleaning and changeover of the line.
Assists in maintaining an accurate inventory by proper reporting of material usage, minimizing waste, reporting any spills, and ensuring all items per case and cases per pallet counts are accurate.
Utilize RF scanner and SAP system.
Maintain production logs to accurately record downtime/issues.
Completes all paperwork accurately.
Performs housekeeping duties to ensure a neat and orderly work area.
Abides by all departmental and plant safety rules.
Works in other areas as required by business needs.
Requirements:
Previous experience in a manufacturing environment
Must be able to lift up to 50 lbs.
regularly and stand for periods of up to 3 hours at a time
Must be able to team lift 70-100 lbs.
occasionally
Ability to climb steps/ladders
Ability to become a licensed DAP forklift driver
Must wear required PPE at all times throughout the shift (safety glasses, ear plugs, steel-toed shoes)
Excellent communication skills and ability to work well with others
Pay Rate:
$22.23/hr
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world.
At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Baltimore, Maryland
Posted: 2026-07-16 15:08:42
-
JOB DESCRIPTION
JOB DESCRIPTION
WAREHOUSE ASSOCIATE RESPONSIBILITIES/ESSENTIAL TASKS:
• High-energy individual with a strong work ethic
• Self-motivated with ability to work with limited supervision
• Independent decision maker as needed to accomplish tasks
• Lift and carry a minimum of 50 pounds repeatedly throughout shift
• Handling of freight as directed by Capstone management and customer, meeting company standards, customer time lines and maintaining a safe work environment
• Keeps site Supervisor and manager informed regarding conditions on the dock, accomplishments and concerns; contributes suggestions for improvements
• Ensures proper LOT rotation and including FIFO (first in-first out) and organic product handling and shipping process
• Strong organization and prioritizing skills
• Must be proficient in math
• Must be have forklift license
• Manage response to rapidly changing products on inbound and outbound
• Must be able to follow directions and work independently
• Verify all shipments are recorded and verified the accuracy of the shipment against the paperwork for incoming and outgoing shipments
• Requires high degree of attention, skills, and dexterity in the control of a forklift and stacking of the product on the pallet
• Transport selected product to designated dock area using power equipment.
• Handle all products so as not to injure teammates or damage the product, the bags or cases
• Comply effectively with company work and safety rules.
• Maintain a quality of work that limits mis picks, short and damages
• Comply with company attendance policy.
The warehouse Associate is responsible for loading or unloading pallets, bags and cases, on and off trailers and other vehicles by using a forklift, pallet jack or by hand.
• Warehouse associate is responsible for operating a forklift to move, locate, stack, Stretch wrap and count items throughout Profile Food.
Work with direct contact with customer's staff and outside delivery personnel; emphasis is placed on the ability to relate in a positive, friendly manner.
The Operator is accountable for the safe and efficient operation of the vehicle and may also be required to perform Order Filler and Checker Duties.
EDUCATION AND EXPERIENCE:
• Graduation from high school or GED equivalent
• Previous experience in shipping, receiving or other related fields.
5 years preferred.
• Ability to handle physical workload
• Ability to multi-task and prioritize
• Strong organizational skills
• Forklift Certified
• Strong knowledge of warehouse, inventory, and shipping operations methods and practices
• Ability to read, write and speak English required, bilingual skills (English/Spanish) preferred.
• Problem solving, team building, project execution and ability to multi-task
PHYSICAL REQUIREMENTS:
Some standing, walking, moving, climbing, carrying, bending, kneeling, crawling, reaching, handling, pushing and pulling.
Ability to lift 50lbs.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential tasks.
SPECIAL REQUIREMENTS:
Possession of a valid driver's license and Forklift Certification
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to medical, dental, vision, Employer paid life insurance, STD/LTD, vacation/sick days/parental leave, 401(k), employee stock purchase plan, and pension.
Hourly: $18-$21+ DOE
ABOUT US
Mantrose Group is a world leader in specialty coatings and functional blends for the food, pharmaceutical and personal care industries.
Founded more than 100 years ago, Mantrose is proud to be part of RPM International Inc., a $5.6 billion multinational company with 14,600 employees worldwide and subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
The company has a diverse portfolio with hundreds of name-brand products, many of which are leaders in the markets they serve.
Mantrose-Haeuser Co., Inc.
has been at the forefront of developing superior edible coatings and specialty products for the pharmaceutical, confectionery, agricultural, food, personal care and industrial industries for decades.
Since our company was founded over 100 years ago, we have been delivering unparalleled results to our clients for all of their coating and custom product development needs.
NatureSeal® both an industry veteran and fresh-cut produce pioneer, has been a leading expert in shelf-life extension technology worldwide.
Our patented line of products has grown exponentially, offering produce solutions to the processor, foodservice and home use markets.
Profile Food Ingredients offers a wide range of specialty product formulations for use in dairy products, baked goods, beverages, confections, nutraceuticals, dips, dressings and sauces.
Its product line promotes uniformity, enhances texture, thickens, prevents separation and extends shelf life and includes clean label, non-GMO, organic and natural solutions.
Since 1946, Holton Food Products has been helping its customers succeed by providing quality ingredients, customized product development and technical support-all fueled by strong food science and applications experience.
This dedication and know-how has enabled our customers to build appealing product lines, increase sales and improve margins.Apply for this ad Online! ....Read more...
Type: Permanent Location: Elgin, Illinois
Posted: 2026-07-16 15:08:40
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The purpose of the Manufacturing Systems Engineer is to manage and maintain SAP manufacturing and warehouse master data to ensure accurate, compliant, and efficient execution of production, planning, inventory, and logistics processes across the organization.
The position is responsible for creating, updating, and governing material master records, Bills of Materials (BOMs), and master recipes while supporting SAP EWM integration and collaborating with cross-functional teams to ensure data accuracy, system readiness, and operational effectiveness.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Material Master Data Management
Create, extend, update, and maintain material master records in SAP for raw materials, semi-finished goods, finished goods, packaging, and other relevant material types.
Ensure required data fields are completed accurately across applicable views, including production, warehousing, planning, and logistics-related attributes needed for downstream execution and reporting.
Validate material descriptions, units of measure, plant-specific data, status settings, and other relevant master data attributes for consistency and business readiness.
Coordinate with business stakeholders to gather source information and confirm new material setups or changes before implementation in SAP.
Bill of Materials (BOM) Creation and Maintenance
Create and maintain Bills of Materials (BOMs) to accurately define the components, quantities, and units of measure required to manufacture finished and semi-finished products.
Review BOM requests for completeness and verify component structure, usage, and revision accuracy prior to release.
Process BOM revisions and updates in alignment with engineering, operations, or formulation changes while preserving documentation and version integrity.
Support data accuracy for production planning and warehouse staging by ensuring components are correctly aligned to the finished good and plant requirements.
Recipe / Master Recipe Setup and Maintenance
Create, maintain, and revise master recipes in SAP for process manufacturing environments.
Maintain recipe structures including operations, phases, resource assignments, process sequence relationships, and material usage as required by the manufacturing process.
Coordinate with operations, technical, quality, and process owners to ensure recipes reflect approved manufacturing methods, process instructions, and production requirements.
Ensure BOMs and recipes are aligned appropriately for products that require both material definition and process definition in SAP production execution.
SAP EWM and Production Support
Support master data readiness for SAP EWM-enabled warehouse and production integration processes, including data needed for product setup, staging, and production supply.
Collaborate with warehouse and production teams to ensure material and product master data supports correct staging, warehouse task processing, and goods movement execution where applicable.
Help maintain data needed for warehouse product setup or related EWM master data dependencies where the business process requires alignment between ERP material master records and EWM product master records.
Assist with issue resolution for master data-related errors impacting production orders, process orders, warehouse staging, or inventory movements.
Data Governance, Quality, and Compliance
Follow established procedures, naming conventions, approval workflows, and internal controls for creation and maintenance of SAP master data.
Perform data validation checks to ensure completeness, accuracy, and consistency across material master, BOM, and recipe records.
Maintain supporting documentation for setups, revisions, and change requests in accordance with company recordkeeping and audit requirements.
Participate in master data clean-up efforts, standardization initiatives, and continuous improvement activities to improve data quality and process efficiency.
Cross-Functional Coordination and Support
Serve as a coordination point between business users and SAP support/resources for master data requests, updates, and issue resolution.
Communicate effectively with manufacturing, planning, procurement, engineering, quality, and warehouse stakeholders to gather requirements and confirm changes.
Support training, documentation, and standard work development related to master data setup and maintenance processes.
Assist in preparing reports, audits, SAP usage metrics, and status updates related to master data requests and processing volumes.
EDUCATION REQUIREMENT:
Bachelors degree in Engineering or equivalent from an accredited four or five year college or university.
EXPERIENCE REQUIREMENT:
Prior experience in a manufacturing or industrial setting, preferably with batch/recipe manufacturing.
Knowledge of SAP, SmartSheet, and other technology systems.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Strong attention to detail and high level of data accuracy.
Understanding of manufacturing master data concepts, including Material Master, Bill of Materials (BOM), Master Recipe / Recipe Management
Ability to manage multiple requests, priorities, and deadlines in a fast-paced environment.
Strong organizational, administrative, and documentation skills.
Effective written and verbal communication skills.
Ability to work cross-functionally and follow structured approval and change control processes.
Proficiency in Microsoft Office applications, especially Excel.
Comfortable learning new technology systems and leveraging systems for maximum efficiency.
TRAVEL REQUIRED: Occasional travel to company events may be requested.
WORK LOCATION: Onsite at our Sealants manufacturing facility in Columbus, GA.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally ranges between $62,807 and $77,609.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2026-07-16 15:08:34
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The purpose of the Manufacturing Systems Engineer is to manage and maintain SAP manufacturing and warehouse master data to ensure accurate, compliant, and efficient execution of production, planning, inventory, and logistics processes across the organization.
The position is responsible for creating, updating, and governing material master records, Bills of Materials (BOMs), and master recipes while supporting SAP EWM integration and collaborating with cross-functional teams to ensure data accuracy, system readiness, and operational effectiveness.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Material Master Data Management
Create, extend, update, and maintain material master records in SAP for raw materials, semi-finished goods, finished goods, packaging, and other relevant material types.
Ensure required data fields are completed accurately across applicable views, including production, warehousing, planning, and logistics-related attributes needed for downstream execution and reporting.
Validate material descriptions, units of measure, plant-specific data, status settings, and other relevant master data attributes for consistency and business readiness.
Coordinate with business stakeholders to gather source information and confirm new material setups or changes before implementation in SAP.
Bill of Materials (BOM) Creation and Maintenance
Create and maintain Bills of Materials (BOMs) to accurately define the components, quantities, and units of measure required to manufacture finished and semi-finished products.
Review BOM requests for completeness and verify component structure, usage, and revision accuracy prior to release.
Process BOM revisions and updates in alignment with engineering, operations, or formulation changes while preserving documentation and version integrity.
Support data accuracy for production planning and warehouse staging by ensuring components are correctly aligned to the finished good and plant requirements.
Recipe / Master Recipe Setup and Maintenance
Create, maintain, and revise master recipes in SAP for process manufacturing environments.
Maintain recipe structures including operations, phases, resource assignments, process sequence relationships, and material usage as required by the manufacturing process.
Coordinate with operations, technical, quality, and process owners to ensure recipes reflect approved manufacturing methods, process instructions, and production requirements.
Ensure BOMs and recipes are aligned appropriately for products that require both material definition and process definition in SAP production execution.
SAP EWM and Production Support
Support master data readiness for SAP EWM-enabled warehouse and production integration processes, including data needed for product setup, staging, and production supply.
Collaborate with warehouse and production teams to ensure material and product master data supports correct staging, warehouse task processing, and goods movement execution where applicable.
Help maintain data needed for warehouse product setup or related EWM master data dependencies where the business process requires alignment between ERP material master records and EWM product master records.
Assist with issue resolution for master data-related errors impacting production orders, process orders, warehouse staging, or inventory movements.
Data Governance, Quality, and Compliance
Follow established procedures, naming conventions, approval workflows, and internal controls for creation and maintenance of SAP master data.
Perform data validation checks to ensure completeness, accuracy, and consistency across material master, BOM, and recipe records.
Maintain supporting documentation for setups, revisions, and change requests in accordance with company recordkeeping and audit requirements.
Participate in master data clean-up efforts, standardization initiatives, and continuous improvement activities to improve data quality and process efficiency.
Cross-Functional Coordination and Support
Serve as a coordination point between business users and SAP support/resources for master data requests, updates, and issue resolution.
Communicate effectively with manufacturing, planning, procurement, engineering, quality, and warehouse stakeholders to gather requirements and confirm changes.
Support training, documentation, and standard work development related to master data setup and maintenance processes.
Assist in preparing reports, audits, SAP usage metrics, and status updates related to master data requests and processing volumes.
EDUCATION REQUIREMENT:
Bachelors degree in Engineering or equivalent from an accredited four or five year college or university.
EXPERIENCE REQUIREMENT:
Prior experience in a manufacturing or industrial setting, preferably with batch/recipe manufacturing.
Knowledge of SAP, SmartSheet, and other technology systems.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Strong attention to detail and high level of data accuracy.
Understanding of manufacturing master data concepts, including Material Master, Bill of Materials (BOM), Master Recipe / Recipe Management
Ability to manage multiple requests, priorities, and deadlines in a fast-paced environment.
Strong organizational, administrative, and documentation skills.
Effective written and verbal communication skills.
Ability to work cross-functionally and follow structured approval and change control processes.
Proficiency in Microsoft Office applications, especially Excel.
Comfortable learning new technology systems and leveraging systems for maximum efficiency.
TRAVEL REQUIRED: Occasional travel to company events may be requested.
WORK LOCATION: Onsite at our Sealants manufacturing facility in Columbus, GA.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally ranges between $62,807 and $77,609.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2026-07-16 15:08:32
-
JOB DESCRIPTION
Quality Control Tech:
The QC Tech works in a production setting ensuring product quality at various stages of processing.
Testing product samples is performed using various types of lab equipment.
The ability to multi-task and complete testing in a timely manner is essential in order to expedite production.
Our QC Tech "Pay for Skills Program" is a defined career path that provides opportunity to advance in your position and increase compensation based on skill level.
To find out more apply today! Preferred Skills: Quality Control experience is an ISO environment Good math skills. Self-motivated with attention to detail. Excellent communication skills. Accurately enter and retrieve computer data. Ability to solve problems in a team environment. Willing to work overtime as required. Job Type: Full-time Pay: $13.50 - $15.50 per hour.
This position is bonus eligible.
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401(k) matching Employee Stock Purchase Plan Dental insurance Employee assistance program Flexible spending account Health insurance Life insurance Paid time off Referral program Tuition reimbursement Vision insurance Pension Schedule: 8-hour shift 1st Shift Monday - Friday,6 am-2:30 pm 2nd Shift, Monday - Friday, 2 pm- 10:30 pm 3rd Shift, Sunday-Thursday, 10 pm- 6:30 am TCI is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Ellaville, Georgia
Posted: 2026-07-16 15:08:31
-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude.
All candidates are required to pass drug test and background check.Apply for this ad Online! ....Read more...
Type: Permanent Location: Westfield, Massachusetts
Posted: 2026-07-16 15:08:30
-
JOB DESCRIPTION
Tremco Incorporated is a leading manufacturer of products for the construction and new building maintenance markets and a fast-growing division of RPM.
Our Weatherproofing Technologies Division currently seeks a Commercial Construction Superintendent with a proven track record in running and supervising commercial construction projects to deliver projects on time and within budget. You will be responsible for jobsite safety, resolving project issues and problems, scheduling and providing coordination between subcontractors and owner operations, quality and affirming specifications are followed in accordance with Tremco standards, project costs and generating reports on project status, and ensuring owner satisfaction. This position requires 5-10 years' experience in commercial construction or 5 years as a foreman.
You must be able to keep project records and interface with owners, subcontractors, and Company management.
Travel is required. Additional duties will include participating in development and enforcement of jobsite safety plans, specifications, price estimates, schedules, and sales efforts as they affect the aforementioned projects.
Also, responsibilities will include Sales & Service Support, Field Resource & Customer Management communication as necessary.
Core understanding of General building standards knowledge, Scheduling, Shop drawing review.
OSHA 10 Hour Certification is required.
Deep understanding of all Construction Management tasks, understanding of Superintendent roles & responsibilities communications, Superior written, oral and digital communication skills, Able to create performance reporting
Computer Literacy: Email, web, MSWord, and MSExcel The hourly rate for applicants in this position generally ranges between $20 and $33.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Benefits: Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Youngstown, Ohio
Posted: 2026-07-16 15:08:26
-
Quality Control Inspector
Beckenham
£32'000- £40'000 + Variety Of Work + Technical Training + Flexi Time + Competitive Pension + Stability + Family Feel Environment + Immediate Start
An excellent opportunity for a Quality Control Inspector with CMM inspection experience to join a close-knit and highly skilled team where your attention to detail and expertise will be genuinely valued.
This company operates within the medical sector, supplying specialist products across Europe.
Due to continued growth, they are looking for a Quality Control Inspector who enjoys hands-on inspection work and wants to contribute to meaningful, high-precision projects.
As part of a small team, you will play a key role in ensuring products meet the highest quality standards, carrying out detailed inspections and supporting continuous improvement across the quality department.
As A Quality Control Inspector You Will Be:
Site Based - Monday - Friday 37.5 Hour Week
Operating ZEISS CMM Equipment
Carrying Out First-Off, In-Process and Final Inspection
Measuring Components Using Precision Measuring Equipment
Recording Inspection Results and Completing Quality Documentation
Supporting Continuous Improvement Activities
The Successful Quality Control Inspector Will Have:
Experience using CMM technology (ZEISS desirable)
Inspection and Testing experience within a manufacturing environment
Experience using precision measuring equipment
Ability to read and interpret engineering drawings
Commutable to Beckenham
If interested, please apply or contact Charlie Auburn on 02038137949 for immediate consideration.
Keywords: ZEISS, CMM, Quality Control Inspector, Quality Inspector, Inspector, Inspection, Metrology, Precision Engineering, Manufacturing, Medical Devices, Healthcare, Engineering, Quality, Beckenham, Kent, Bromley, London, South London, South East London.
This vacancy is being advertised by Future Engineering Recruitment Ltd. The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.
Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit, should not apply as your details will not be processed.
We will endeavour to respond to all applicants; however, due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted. ....Read more...
Type: Permanent Location: Beckenham, England
Start: ASAP
Salary / Rate: £32000 - £40000 per annum + Leading Package + Progression
Posted: 2026-07-16 15:01:27
-
An exciting opportunity has arisen for a Quality Control Inspector, based in Portsmouth, to join a global leader specialising in high-tech electronic technologies.
The Quality Control Inspector, based in Portsmouth, will ensure all components meet quality standards before leaving the manufacturing area, preventing errors within the process to deliver a quality product to the customer.
Key Responsibilities and Accountabilities
Carry out shopfloor inspections on product, ensuring customer specifications/industry standards are met i.E.
AS9100, MIL Standard
Ensure compliance with quality procedures, validating product quality against internal & external standards
Use various measuring tools to make sure components/parts/products are within standard variances
Record inspection information and update quality database as required
Raise non-conformance paperwork
Share findings of inspections with quality and production management individuals
This is a unique chance to join a forward-thinking company in an exciting technology market who can offer the opportunity of career progression and personal development.
To apply for this Quality Control Inspector role based in Portsmouth, please send your CV to jthompson@redlinegroup.Com, or for more information contact James Thompson on 01582 878831 ....Read more...
Type: Permanent Location: Portsmouth, England
Start: ASAP
Salary / Rate: £25000 - £30000 per annum
Posted: 2026-07-16 14:56:35
-
Private Dentist Jobs in Belcoo, County Fermanagh.
Fully private referral practice, established clinical team and excellent opportunity to build a private list.
ZEST Dental Recruitment, in partnership with an established dental practice, is seeking to recruit a Private Dentist in Belcoo, County Fermanagh.
Private Dentist
Belcoo, County Fermanagh
Part-time position, two days per week, Wednesday and Thursday, with scope to increase
Guaranteed minimum earnings of £400 per day for the first two months
Excellent private earning potential with opportunities in restorative dentistry, Invisalign, composite bonding and implants
Growth role with the opportunity to establish a private patient list
Fully private three-surgery referral practice
Dentally software, OPG and CBCT scanner
Dedicated Treatment Coordinator, Hygienist and experienced support team
Established referral base from both internal and external sources
Excellent patient feedback with a 4.9 Google rating
Permanent position
Reference: DW100317
This is an excellent opportunity to join a well-established fully private referral practice in the picturesque village of Belcoo, close to the border with the Republic of Ireland.
Initially available for two days per week, Wednesday and Thursday, the position offers genuine scope to increase sessions as the patient list develops.
This is a growth role, with the successful clinician building a new private list supported by an established referral network, excellent marketing support and a dedicated Treatment Coordinator.
The practice already accepts both internal and external referrals across a broad range of private treatments, creating an excellent platform for future growth.
The practice is equipped with Dentally software, OPG and CBCT imaging and is supported by an experienced clinical and administrative team.
Existing clinicians provide restorative dentistry, Invisalign, composite bonding and implant treatment within a modern, high-quality clinical environment.
Successful candidates will be GDC registered dentists with experience of providing high-quality private dental treatment in the UK or Ireland.
For further information regarding this dentist position, confidential enquiries can be made by submitting your CV.
All applications and enquiries will be treated in the strictest confidence. ....Read more...
Type: Permanent Location: Enniskillen, Northern Ireland
Salary / Rate: £80000 - £120000 per annum + Fully private with guaranteed day rate
Posted: 2026-07-16 14:22:09
-
Regional Sales Manager | Ophthalmic Lenses | North East England
Zest Optical is working in partnership with a global leader in ophthalmic lenses to recruit a Regional Sales Manager for the North East.
This is an exciting opportunity to join a premium manufacturer renowned for innovation, clinical excellence and cutting-edge lens technology.
This is a highly commercial role focused on developing new business while growing existing independent optical accounts across the region.
You'll work with practice owners and key decision makers to introduce industry-leading lens solutions, build long-term partnerships and drive sustainable sales growth.
Regional Sales Manager - Role
Manage and develop a territory across the North West, driving sales growth and market share.
Identify and win new independent optical accounts through proactive business development.
Build strong, long-term relationships with existing customers to maximise account performance.
Deliver commercial presentations and product demonstrations to practice owners and dispensing teams.
Promote premium ophthalmic lens technologies and value-added solutions.
Develop strategic territory plans to achieve and exceed sales targets.
Negotiate commercial agreements and identify opportunities to increase product penetration and profitability.
Maintain a strong understanding of market trends, competitor activity and customer requirements.
Represent the business professionally, acting as a brand ambassador throughout the region.
Regional Sales Manager - Requirements
Previous B2B sales experience within the optical industry.
Experience selling ophthalmic lenses, optical equipment or premium eyewear products.
A proven track record of developing new business and growing existing accounts.
Strong commercial awareness with excellent negotiation and relationship-building skills.
Self-motivated, ambitious and target-driven with the ability to work autonomously.
Excellent presentation and communication skills.
Full UK driving licence.
Regional Sales Manager - Benefits
Up to £47,000 basic salary (depending on experience).
Lucrative bonus scheme.
Company car or car allowance.
Pension.
Private healthcare.
25 days holiday plus bank holidays.
Ongoing training and career development.
Opportunity to join a market-leading international organisation with an outstanding reputation for innovation and product quality.
To avoid missing out on this opportunity, please click on the Apply Now link below.
....Read more...
Type: Permanent Location: Leeds, England
Salary / Rate: £41000 - £55000 per annum + Additional Benefits
Posted: 2026-07-16 13:40:00
-
Senior Packaging Technologist
Normanton
£63,000 - £65,000 + Industry-Leading Pension + Excellent Benefits + Career Progression + Training + Immediate Start
Are you a Senior Packaging Technologist looking to step into a role where you can influence packaging strategy, drive innovation, and lead major improvement projects across a market-leading FMCG manufacturer?
This is an exciting opportunity to join one of the UK's leading food manufacturers, investing heavily in its people, packaging technology, and manufacturing capability.
You'll take ownership of packaging performance across a high-volume production environment, working on everything from material optimisation and packaging development to efficiency improvements, sustainability initiatives, and the introduction of new technologies.
Working closely with Operations, Engineering, Procurement, Quality, and NPD teams, you'll play a key role in improving packaging performance, reducing waste, increasing line efficiencies, and delivering innovative packaging solutions that support long-term business growth.
Your Role As A Senior Packaging Technologist Will Include:
Leading packaging development and continuous improvement projects across manufacturing.
Optimising packaging materials to improve performance, quality, and cost.
Driving reductions in waste, downtime, and material losses across packaging operations.
Supporting packaging trials, validation, and the implementation of new packaging formats and technologies.
Working closely with production teams to improve packaging line performance and efficiency.
Leading root cause investigations relating to packaging failures and quality issues.
Collaborating with suppliers to identify new materials, innovations, and sustainability opportunities.
Using production and packaging data to identify opportunities for improvement.
Supporting automation, process optimisation, and future packaging investment projects.
As A Senior Packaging Technologist You Will Have:
Experience as a Senior Packaging Technologist, Packaging Technologist, Packaging Development Technologist, Packaging Development Manager, or similar within FMCG.
A background in food, beverage, pharmaceutical, personal care, or another fast-paced manufacturing environment.
Strong knowledge of packaging materials, packaging processes, and manufacturing operations.
Experience delivering packaging improvement, cost reduction, or packaging innovation projects.
Excellent communication and stakeholder management skills with the ability to influence cross-functional teams.
A passion for packaging innovation, continuous improvement, and delivering measurable business results.
Keywords: Senior Packaging Technologist, Packaging Technologist, Packaging Development Technologist, Packaging Development Manager, Packaging Innovation Manager, Packaging Engineer, FMCG, Food Manufacturing, Packaging Development, Sustainable Packaging, Normanton, Wakefield, Leeds, West Yorkshire. ....Read more...
Type: Permanent Location: Normanton, England
Start: ASAP
Salary / Rate: £63000 - £65000 per annum + Leading Package + Progression
Posted: 2026-07-16 13:16:58
-
SEN Teacher
We are seeking a SEN Teacher to support our client in Hermitage, West Berkshire.
Our client operates a Residential SEN School for pupils with Complex Autism aged 5-25 years.
You will be delivering a high-quality learning programme in an environment that will support young people to grow and develop.
You will plan, deliver and evidence learning to help young people to achieve individual progress in relevant Areas of Learning.
You will also undertake tutor responsibilities to a small cohort of young people working in conjunction with their residential team.
Location: Hermitage, West Berkshire
Rate of Pay:
Starting £18.00 - £23.00 per hour PAYE + Holiday Pay
Requirements:
Enhanced Child & Adult DBS on the Update Service
Hold a UK Driving License (Desirable)
Experience working with Children with Learning Difficulties and Complex Autism
Degree-level education, teaching or SEND qualifications (or willingness to work towards them), TEACCH training.
We do not offer sponsorship for this role
If you are interested in this role, please apply.
You can also send your CV to Emily egame@charecruitment.com ....Read more...
Type: Contract Location: Newbury, England
Start: September 2026
Duration: Ongoing
Salary / Rate: £18.00 - £23.00 per hour
Posted: 2026-07-16 13:13:35
-
Team Leader
We are seeking a Team Leader for our Supported Living Accomodation in Reading.
Our client has both Adults and Young People (16+) services.
As a Team Leader you will provide leadership to a team of staff.
To provide support to Service Users in line with the Organisation's aim to provide high quality support tailored to suit each of our service users, create and follow individual support plans or PCPs and to promote independence and choice.
Shifts:
Location: Reading
Rate of Pay:
Starting £14.00 per hour
Requirements:
NVQ level 3 desirable
Enhanced Child & Adult DBS on the Update Service
Hold a UK Driving License (Desirable)
Experience working within CQC and or Ofsted regulated service
We do not offer sponsorship for this role
If you are interested in this role, please apply.
You can also send your CV to Emily egame@charecruitment.com ....Read more...
Type: Contract Location: Reading, England
Start: ASAP
Duration: Ongoing
Salary / Rate: Up to £14.00 per hour
Posted: 2026-07-16 13:13:31
-
CSA Design Manager
Cardiff
£65,000 - £80,000 + Travel Allowance + Accommodation + Private Medical + Pension + Bonus + Career Progression + Long-Term Project + Immediate Start
Join a leading international main contractor delivering one of the UK's largest and most technically challenging construction developments.
This is an opportunity to become a CSA Design Manager on a landmark project that is expected to run for several years, providing genuine long-term stability, exposure to complex construction, and outstanding career progression.
You'll work within an experienced multidisciplinary design and construction team, coordinating Civil, Structural and Architectural design from pre-construction through to project completion.
This is a business that promotes from within, rewards performance, and offers clear opportunities to progress into Senior Design Management and leadership roles as the project and wider business continue to grow.
If you're looking to work on a major project where you'll be given responsibility, autonomy and the chance to develop your career over the long term, this is an excellent opportunity.
Your Role as a CSA Design Manager Will Include:
Managing the Civil, Structural and Architectural design process throughout the project lifecycle.
Coordinating consultants, subcontractors and internal project teams to ensure successful design delivery.
Reviewing drawings, technical submissions and design information.
Ensuring design programmes are achieved while maintaining quality and compliance.
Managing design interfaces between CSA, MEP and construction teams.
Supporting design workshops, value engineering and technical problem solving throughout delivery.
As a CSA Design Manager You Will Have:
Previous experience working for a main contractor or specialist contractor on major construction projects.
Strong understanding of Civil, Structural or Architectural design coordination.
Excellent communication and stakeholder management skills.
Ability to manage multiple design packages within a fast-paced construction environment.
Willingness to work full-time on site Monday-Friday.
Keywords: CSA Design Manager, Design Manager, Civil Design Manager, Structural Design Manager, Architectural Design Manager, CSA Coordinator, Design Coordination, Main Contractor, Construction Design, Building Design, Industrial Construction, Advanced Manufacturing, Major Projects, Infrastructure, Mission Critical, Design Management, Somerset, Bridgwater, Taunton, Bristol, Weston-super-Mare, Burnham-on-Sea, Glastonbury, Street, Yeovil, Exeter, Bath, Frome, Wells. ....Read more...
Type: Permanent Location: Cardiff, Wales
Start: ASAP
Salary / Rate: £65000.00 - £80000 per annum + Travel Allowance + Package
Posted: 2026-07-16 12:37:08
-
Design Manager
Bristol
£65,000 - £80,000 + Travel Allowance + Accommodation + Private Medical + Pension + Bonus + Career Progression + Long-Term Project + Immediate Start
Join a leading international main contractor delivering one of the UK's largest and most technically challenging construction developments.
This is an opportunity to become a CSA Design Manager on a landmark project that is expected to run for several years, providing genuine long-term stability, exposure to complex construction, and outstanding career progression.
You'll work within an experienced multidisciplinary design and construction team, coordinating Civil, Structural and Architectural design from pre-construction through to project completion.
This is a business that promotes from within, rewards performance, and offers clear opportunities to progress into Senior Design Management and leadership roles as the project and wider business continue to grow.
If you're looking to work on a major project where you'll be given responsibility, autonomy and the chance to develop your career over the long term, this is an excellent opportunity.
Your Role as a CSA Design Manager Will Include:
Managing the Civil, Structural and Architectural design process throughout the project lifecycle.
Coordinating consultants, subcontractors and internal project teams to ensure successful design delivery.
Reviewing drawings, technical submissions and design information.
Ensuring design programmes are achieved while maintaining quality and compliance.
Managing design interfaces between CSA, MEP and construction teams.
Supporting design workshops, value engineering and technical problem solving throughout delivery.
As a CSA Design Manager You Will Have:
Previous experience working for a main contractor or specialist contractor on major construction projects.
Strong understanding of Civil, Structural or Architectural design coordination.
Excellent communication and stakeholder management skills.
Ability to manage multiple design packages within a fast-paced construction environment.
Willingness to work full-time on site Monday-Friday.
Keywords: CSA Design Manager, Design Manager, Civil Design Manager, Structural Design Manager, Architectural Design Manager, CSA Coordinator, Design Coordination, Main Contractor, Construction Design, Building Design, Industrial Construction, Advanced Manufacturing, Major Projects, Infrastructure, Mission Critical, Design Management, Somerset, Bridgwater, Taunton, Bristol, Weston-super-Mare, Burnham-on-Sea, Glastonbury, Street, Yeovil, Exeter, Bath, Frome, Wells. ....Read more...
Type: Permanent Location: Bristol, England
Start: ASAP
Salary / Rate: £65000.00 - £80000 per annum + Travel Allowance + Package
Posted: 2026-07-16 12:31:40
-
Junior Mechanical Project Manager High Wycombe £65,000 - £80,000 + Travel Allowance + Stay Away Included + Discretionary Bonus + Pension + Holidays + Private Medical + Full Package + Progression + Immediate Start Take on the role of Junior Mechanical Project Manager with a leading technical main contractor delivering complex projects across the UK's rapidly growing mission-critical and industrial construction sectors.
This is a fantastic opportunity for a hands-on mechanical professional - plumber, pipefitter, HVAC engineer or mechanical supervisor or looking to step into site management and progress within a major contractor environment.
You'll join a business known for promoting from within and giving practical, site-based professionals the opportunity to move into construction and project management.
This role suits someone with a strong tools background who understands site delivery and wants long-term career progression.Your Role as a Junior Mechanical Project Manager Will Include:
Coordinating mechanical subcontractors, direct labour, and specialist trades on site.
Monitoring progress against the programme and reporting into senior site leadership.
Ensuring all mechanical works meet quality standards, drawings, and specifications.
Attending site coordination and progress meetings.
Maintaining strong health & safety standards and site compliance at all times.
As a Junior Mechanical Project Manager, You Will Have:
A strong mechanical background such as plumber, pipefitter, HVAC engineer, or mechanical supervisor.
Experience working in industrial, pharmaceutical, manufacturing, or data-centre environments.
Ambition to progress into construction or project management roles.
Willingness to travel or stay away for projects when required.
Strong communication and organisational skills with a proactive mindset.
Keywords: Mechanical Construction Manager, Mechanical Supervisor, Plumber, Pipefitter, HVAC Engineer, Mechanical Site Manager, Building Services, Industrial Construction, Data Centres, Mechanical Project Engineer, MEP Construction, UK Construction Jobs, Derby, Nottingham, Leicester, Sheffield, Birmingham, Coventry, Wolverhampton, Stoke-on-Trent, Burton upon Trent, Loughborough, Chesterfield, Mansfield, Tamworth, Rugby, Lincoln, Northampton, Slough, Berkshire, High Wycombe, Oxford, Reading, London, Beaconsfield, Maidenhead, Bracknell, Watford, Bath, Swindon, Guildford ....Read more...
Type: Permanent Location: High Wycombe, England
Start: ASAP
Salary / Rate: £65000 - £80000 per annum + + Travel Allowance + Bonus
Posted: 2026-07-16 12:20:51
-
We are partnered with a technology-led product development business in Marlow, Buckinghamshire, that designs and delivers sophisticated electronic products used by customers around the world.
As part of their ongoing growth, they are looking for an Electronic Design Engineer to join an established hardware team working across the full product development lifecycle, from early concept work through to production and ongoing product improvement.
In this Electronic Design Engineer role, you will:
Design and develop analogue and digital electronic hardware for commercial products
Take ownership of designs from initial requirements through to production release and ongoing support
Carry out hardware debugging, fault finding, testing, and performance analysis
Work closely with software, systems, manufacturing, and product teams to deliver high-quality products to market
The ideal Electronic Design Engineer will have:
Experience designing and delivering commercial electronic products
Strong analogue design and hardware debugging skills
Knowledge of embedded systems and mixed-signal electronics
Experience within consumer electronics, embedded systems, communications, audio, or other high-performance electronic products
This is an excellent opportunity to join a collaborative engineering environment where you'll have genuine influence over product development, work alongside experienced engineers, and contribute to products used by customers worldwide.
If you're interested in this Electronic Design Engineer role in Marlow, Buckinghamshire, apply now or contact Ed at efrost@redlinegroup.Com or 01582 878819 for more information. ....Read more...
Type: Permanent Location: Marlow, England
Start: ASAP
Salary / Rate: £50000 - £60000 per annum
Posted: 2026-07-16 12:02:32
-
Regional Sales Manager | Ophthalmic Lenses | North West England
Zest Optical is working in partnership with a global leader in ophthalmic lenses to recruit a Regional Sales Manager for the North West.
This is an exciting opportunity to join a premium manufacturer renowned for innovation, clinical excellence and cutting-edge lens technology.
This is a highly commercial role focused on developing new business while growing existing independent optical accounts across the region.
You'll work with practice owners and key decision makers to introduce industry-leading lens solutions, build long-term partnerships and drive sustainable sales growth.
Regional Sales Manager - Role
Manage and develop a territory across the North West, driving sales growth and market share.
Identify and win new independent optical accounts through proactive business development.
Build strong, long-term relationships with existing customers to maximise account performance.
Deliver commercial presentations and product demonstrations to practice owners and dispensing teams.
Promote premium ophthalmic lens technologies and value-added solutions.
Develop strategic territory plans to achieve and exceed sales targets.
Negotiate commercial agreements and identify opportunities to increase product penetration and profitability.
Maintain a strong understanding of market trends, competitor activity and customer requirements.
Represent the business professionally, acting as a brand ambassador throughout the region.
Regional Sales Manager - Requirements
Previous B2B sales experience within the optical industry.
Experience selling ophthalmic lenses, optical equipment or premium eyewear products.
A proven track record of developing new business and growing existing accounts.
Strong commercial awareness with excellent negotiation and relationship-building skills.
Self-motivated, ambitious and target-driven with the ability to work autonomously.
Excellent presentation and communication skills.
Full UK driving licence.
Regional Sales Manager - Benefits
Up to £47,000 basic salary (depending on experience).
Lucrative bonus scheme.
Company car or car allowance.
Pension.
Private healthcare.
25 days holiday plus bank holidays.
Ongoing training and career development.
Opportunity to join a market-leading international organisation with an outstanding reputation for innovation and product quality.
To avoid missing out on this opportunity, please click on the Apply Now link below.
....Read more...
Type: Permanent Location: Manchester, England
Salary / Rate: £45000 - £55000 per annum + Additional Benefits
Posted: 2026-07-16 11:59:00
-
We are partnered with a well-established British engineering company based in Stroud, Gloucestershire, renowned for designing and manufacturing premium, high-performance products.
They are looking for an experienced Quality Engineer to take ownership of quality across the business.
Reporting directly to senior leadership, this hands-on role offers genuine autonomy and the opportunity to improve processes, raise quality standards, and shape the future of the quality function.
In this Quality Engineer role based in Stroud, Gloucestershire, you will:
Drive quality activities across production, supplier quality, goods-in inspection, and customer returns
Investigate quality issues, implement corrective actions, and support continuous improvement
Develop quality procedures, documentation, and inspection processes across manufacturing
Work closely with suppliers and internal teams to embed a strong quality culture
The ideal Quality Engineer will have:
Experience in a Quality Engineering role within an electronics manufacturing environment
A hands-on approach, with experience implementing quality processes and driving continuous improvement
Strong problem-solving skills and the ability to investigate and resolve manufacturing quality issues
Experience working with suppliers, production teams, and customers to maintain high quality standards
This is an excellent opportunity to join a respected electronics manufacturer where quality is at the heart of every product.
You'll have the freedom to make improvements, influence working practices, and play a key role in developing the quality function.
If you're interested in this Quality Engineer role in Stroud, Gloucestershire, apply now or contact Ed at efrost@redlinegroup.Com for more information.
....Read more...
Type: Permanent Location: Stroud, England
Start: ASAP
Salary / Rate: £40000 - £50000 per annum
Posted: 2026-07-16 11:28:04
-
We are currently recruiting for experienced Freelance Scenic Carpenters / Bench Joiners to join a leading creative production and scenic fabrication company in London, delivering high-quality scenic builds across live events, exhibitions, experiential activations, retail environments and bespoke installations.
This is an excellent opportunity to join a busy workshop during a peak production period, working on a variety of exciting, high-profile projects.
Key Responsibilities:
Manufacture and assemble scenic sets, exhibition stands and bespoke joinery.
Read and interpret technical drawings and build specifications.
Produce high-quality scenic elements to strict production deadlines.
Use a range of woodworking machinery, power tools and hand tools safely.
Assemble bespoke fabricated components within a workshop environment.
Maintain high standards of workmanship and attention to detail.
Work collaboratively within a fast-paced production team.
Skills and Requirements:
Previous experience as a Scenic Carpenter, Bench Joiner or Exhibition Carpenter.
Background within scenic build, exhibitions, live events, retail fit-out or bespoke joinery.
Ability to read and work from technical drawings.
Strong assembly and workshop manufacturing experience.
Excellent attention to detail and quality of finish.
Experience using woodworking machinery, power tools and hand tools.
Reliable, hardworking and able to work to tight production deadlines.
Metalwork or press brake experience would be advantageous but is not essential.
If interested, please get in touch with Neil, or contact the office on 0203 008 5212.
Alternatively, click Apply to forward an up-to-date copy of your CV.
Cavendish (Recruitment) Professionals Ltd are proud to be an equal opportunity employer, and we believe that inclusivity begins with the candidate experience.
All qualified applicants will receive consideration for employment regardless of gender, race, age, sexual orientation, religion, or belief. ....Read more...
Type: Contract Location: Kingston upon Thames, England
Start: ASAP
Duration: Temporary
Posted: 2026-07-16 10:54:43
-
We are looking for a reliable and hardworking General Operative to join a busy and growing manufacturing team in Morley.This is a varied, hands-on role where you will support the day-to-day production process, helping to ensure products are manufactured efficiently and to a high standard.
The successful candidate will be willing to learn, work well as part of a team, and take pride in producing quality work.Their LEEDS-based facility is based just a few minutes from the M62 and M1 motorways, meaning the successful candidate will easily be able to commute from surrounding towns & cities, including Wakefield, Bradford, Huddersfield and Dewsbury.Key Responsibilities of the General Operative
Load, unload and move materials safely around the workshop and yard.
Prepare and organise products ready for storage, collection and delivery.
Keep the yard and work areas clean, tidy and safe.
Support stock control and carry out general labouring duties as required.
Work as part of a team to meet deadlines while following health and safety procedures.
I would be keen to speak to individuals who possess
Previous experience in a labouring, warehouse, yard operative or general operative role.
A hardworking and reliable attitude, with the ability to carry out physically demanding work.
Good awareness of health and safety procedures and the ability to follow instructions.
Strong teamwork and communication skills, with a flexible approach to working indoors and outdoors.
Experience using power tools and an FLT and working with steel product range.
Working Hours of the General Operative
Monday- Thursday: 07:30-16:30
Friday- 07:30-12:30
In Return, the General Operative will receive
Hourly Rate: £14.05 Per Hour
Early finish on a Friday
34 days paid holiday
Cycle to work scheme
Option to purchase an extra 4 holidays.
If you are interested in the General Operative role, please click “APPLY NOW” and upload your most recent CV, alternatively contact Ismail at E3 Recruitment. ....Read more...
Type: Permanent Location: Leeds, England
Start: ASAP
Salary / Rate: Up to £14.05 per hour
Posted: 2026-07-16 10:40:33
