-
JOB DESCRIPTION
The Process Engineer will manage and commercialize new processes developed by the Research and Development department into full scale production within the Tremco Corsicana plant.
The Process Engineer will determine which equipment in the plant is most suited to make new products and what modifications may be necessary for such production to successfully occur. Over the next two years, the Tremco Corsicana facility will design, construct, and commission a new reactor.
This new major plant expansion will introduce new production capabilities to the Corsicana facility and is expected to serve as a model project for further plant modernization efforts.
The employee filling this role will lead this expansion project all the way through the commissioning and scaleup phases. In addition to supporting new products and plant expansions, this individual will also manage and optimize existing processes throughout the plant with the goals of maximizing yield and minimizing batch cycle times. SUMMARY OF JOB DUTIES: Safety The Process Engineer will actively participate in process safety reviews, and process hazards analysis as the technical representative. Must understand the hazards of the raw materials, processes, and products in order to develop a safe manufacturing process. Subject matter expert in wide range of chemical plant processes and systems.
Perform safety vent calculations for process upset conditions. Determine the correct control systems and interlocks to safely operate the process. Participate in plantwide process safety programs. LEAN Culture Use knowledge of existing processes to propose process modifications which will reduce waste. The Process Engineer, will be the technical consultant to the plant continuous improvement team. Understand the principle and philosophy behind the implementation of a LEAN culture. Product Quality Provide process knowledge to quality control department in order to troubleshoot quality issues. After developing a new process, coordinate the training of operators with a focus on quality critical product specifications, Standard Operating Procedures and process parameters. Productivity Use knowledge of the manufacturing process to improve productivity through elimination of non-value-added activities. Lead the effort to identify causes which result in productivity levels below the expected. Participate with maintenance in facility continuous improvement programs MINIMUM QUALIFICATIONS (special skills, knowledge, ability, education, etc.): Bachelor's degree from four-year College or university in Chemical Engineering.
6+ years related experience in Process Engineering in a manufacturing environment. Ability to comprehend and apply principles of advanced calculus, modern algebra, and advanced statistical theory.
Knowledge of SAP and demonstrated basic knowledge of Process Control Systems. Understand of plant operations Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents.
Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community.
Ability to write speeches and articles for publication that conform to prescribed style and format.
Ability to effectively present information to top management, public groups, and/or boards of directors. Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Ability to define problems, collect data, establish facts, and draw valid conclusions.
Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Must be literate in engineering, R&D, maintenance, quality, production, scheduling, forecasting, SAP, finance, EH&S, and will assist in plant management Process oriented Outside of the box thinking Business comprehension
BENEFITS AND COMPENSATION:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Corsicana, Texas
Posted: 2025-05-05 23:09:40
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and Pure Air Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America. The intern will participate in the standard corporate summer internship program and gain general knowledge and experience within all aspects of the Tremco CPG career and support pathways.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
This intern will work cross-functionally across product lines and with a wide variety of departments to complete the following responsibilities: Competitive Analysis - Complete competitive analysis reports for various product lines Market Research - Compile reports of vital market research data in various segments of our business.
Marketing - Assist with creation of marketing collateral (i.e.
announcements, brochures, etc.), product landing pages, website content, etc.
Product Line Management - Assist with a variety of daily product management tasks including education/training opportunities, field support, product-based collateral (PDS, SDS, etc.), product development and commercialization processes, product testing (application/field trials, 3rd Party testing), SKU creation and sunsetting, etc.
Sales Reporting - Pull, review, and analyze sales report data
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2025-05-05 23:09:39
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB: Project Administrators play a crucial role in ensuring the smooth execution and success of projects by providing essential administrative support in collaboration with Construction Managers and Field Representatives throughout various project phases.
Specifically, the Business Operations Project Administrator is tasked with managing and coordinating all administrative aspects for an array of project types.
This includes services like Patch and Repair, Patch and Repair Plus, General Contracting, Safety Patch and Repair, Building Envelope services, IAQ Services (both standalone and integrated with General Contracting), Job Site Inspections, Roofing Advisor Days, Consulting, Diagnostics, TRACE, ACT, and several emergency repair services. Key responsibilities encompass managing contractor payables, handling customer billings and receivables, ensuring compliance with standards and policies, applying book pricing and WTI documentation policies, overseeing commission and discounting policies, processing change orders, document management, financial data entry, and coordinating communications with Field Resources and Customers as required. Success in this role requires a high level of professionalism, strong organizational and prioritization skills, effective time management, and proficiency in relevant technology and software.
Excellent interpersonal, written, and oral communication skills, coupled with meticulous attention to detail, accuracy, and a self-motivated attitude, are vital.
The administrator must work effectively both independently and as part of a team, demonstrating the ability to collaborate with customers, field staff, and various internal stakeholders. This position involves regular interaction with multiple departments and teams, including General Services, General Contracting field operations, Field Representatives, Business Operations, IT, Finance/Accounting, Warranty, Tremcare, Sales, Accounts Payable, Credit, and Products.
Given the dynamic and fast-paced nature of the role, flexibility and adaptability are essential, as the Project Administrator must navigate and respond to evolving project requirements and organizational needs.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
The Project Administrator plays an integral role in the project lifecycle by validating, organizing, and ensuring compliance for all project documentation and financial processes.
Upon receiving SAP Sales Order information from Customer Service Representatives, the administrator confirms all compliance requirements based on the WTI Price Book Policy/Procedures and Contract Management Policy, completing checklists to ensure data accuracy and completeness.
Key responsibilities include managing critical project documents, such as vendor applications, subcontracts, purchase orders, Master Service Agreements, specifications, certificates of insurance, payment and performance bonds, prevailing wage rates, certified payroll reports, and state-specific compliance documentation.
Project Administrators also facilitate and manage compliance submissions as needed. This role includes dispatching service orders to WTI Technicians, tailored to the specific project type.
For General Contracting projects, the administrator provides WTI Superintendents with essential service orders and field report links to streamline daily reporting.
Additionally, they maintain a comprehensive tracking spreadsheet for all projects, providing up-to-date project insights. Throughout each project, the Project Administrator coordinates with Construction Managers, Field Representatives, field technicians, customers, and management to ensure seamless operations.
Project management duties cover tracking time and expenses, managing payables over 30 days, monitoring plan versus actual costs, verifying that all documents (such as bonds, insurance, and submittals) are submitted and approved, ensuring costs align with budget expectations, and validating all projects older than 90 days. This role includes preparing customer invoices with accuracy and timeliness, adhering to book pricing, time and materials (T&M), not-to-exceed (NTE) limits, lump-sum pricing, and customer-specific billing requirements.
Project Administrators must understand and apply WTI's commission and discount policies when processing invoices across both General Contracting and General Services.
They also review projects for job closeout audits, updating planned versus actual costs, and completing a job closing checklist for final approval. The Project Administrator is essential to ensuring that WTI's policies and procedures are followed precisely, maintaining accurate financial data for reporting at month-end, quarter-end, and fiscal year-end.
This role requires a comprehensive understanding of WTI's operational, financial, and compliance frameworks to support accurate project execution and reporting.
OTHER REQUIRED DUTIES:
Project Management within the following technology platforms, Salesforce, e-Builder, RoofSnap, OLI, Smartsheet, WTI Quick Price App, Concur Hours to Day Conversions Calculating Market Price Weekly backlog meetings Review and resolve customer disputes Manage tech service expenses Assist with travel and hotel arrangements for maintenance and repair routes Coordinate larger supply and equipment purchases, arrange pickup, payments and cost allocation Coordinate material orders Review and process Readsoft workflow items Monitor daily, weekly and monthly reports Customer/Vendor Billing Portals Bi-weekly Project Review Meetings Payment Reconciliation Report low margin jobs Facilitate effective communication Process Implementation Reviews Assist in the preparation of project presentations, reports, and other project-related materials Problem Solving Conflict Management Escalation of concerns and issues Archive Project files as necessary Participate in special projects when necessary
EDUCATION:
Business Management/Administration or equivalent combination of education and experience.
EXPERIENCE: 4-7 years related experience and/or training Project Administration/Management, Construction Accounting, Sarbanes-Oxley, public procurement or job order contract, prevailing wage
OTHER SKILLS AND ABILITIES:
Ability to handle multiple tasks, prioritize effectively, and manage time efficiently. Keeping records, documents, and project files organized and easily accessible. Excellent written and verbal communication skills to interact with team members, stakeholders, and clients. Proficiency in project management software, as well as standard office applications like Microsoft Office (Word, Excel, PowerPoint). Capacity to identify potential issues early on and proactively seek solutions or escalate problems as needed. Ability to think critically and adapt to changing project conditions. Understanding of project budgets, cost tracking, and financial reporting. Ability to assist with financial documentation, such as purchase orders, invoices, and expense reports. Strong time management skills to handle project deadlines and ensure timely task completion. Ability to manage time effectively in a fast-paced environment. Ability to work well with a diverse group of people, from team members to external vendors. Skill in fostering a collaborative, respectful work environment. Strong focus on meeting the needs of clients and stakeholders, understanding project requirements, and keeping them updated on project progress. Ability to resolve conflicts and keep the team working toward common goals. Handling disputes diplomatically and maintaining positive relationships among project team members. Knowledge of State prevailing wage, DB and SCA
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2025-05-05 23:09:39
-
JOB DESCRIPTION
The Process Engineer will manage and commercialize new processes developed by the Research and Development department into full scale production within the Tremco Corsicana plant.
The Process Engineer will determine which equipment in the plant is most suited to make new products and what modifications may be necessary for such production to successfully occur. Over the next two years, the Tremco Corsicana facility will design, construct, and commission a new reactor.
This new major plant expansion will introduce new production capabilities to the Corsicana facility and is expected to serve as a model project for further plant modernization efforts.
The employee filling this role will lead this expansion project all the way through the commissioning and scaleup phases. In addition to supporting new products and plant expansions, this individual will also manage and optimize existing processes throughout the plant with the goals of maximizing yield and minimizing batch cycle times. SUMMARY OF JOB DUTIES: Safety The Process Engineer will actively participate in process safety reviews, and process hazards analysis as the technical representative. Must understand the hazards of the raw materials, processes, and products in order to develop a safe manufacturing process. Subject matter expert in wide range of chemical plant processes and systems.
Perform safety vent calculations for process upset conditions. Determine the correct control systems and interlocks to safely operate the process. Participate in plantwide process safety programs. LEAN Culture Use knowledge of existing processes to propose process modifications which will reduce waste. The Process Engineer, will be the technical consultant to the plant continuous improvement team. Understand the principle and philosophy behind the implementation of a LEAN culture. Product Quality Provide process knowledge to quality control department in order to troubleshoot quality issues. After developing a new process, coordinate the training of operators with a focus on quality critical product specifications, Standard Operating Procedures and process parameters. Productivity Use knowledge of the manufacturing process to improve productivity through elimination of non-value-added activities. Lead the effort to identify causes which result in productivity levels below the expected. Participate with maintenance in facility continuous improvement programs MINIMUM QUALIFICATIONS (special skills, knowledge, ability, education, etc.): Bachelor's degree from four-year College or university in Chemical Engineering.
6+ years related experience in Process Engineering in a manufacturing environment. Ability to comprehend and apply principles of advanced calculus, modern algebra, and advanced statistical theory.
Knowledge of SAP and demonstrated basic knowledge of Process Control Systems. Understand of plant operations Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents.
Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community.
Ability to write speeches and articles for publication that conform to prescribed style and format.
Ability to effectively present information to top management, public groups, and/or boards of directors. Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Ability to define problems, collect data, establish facts, and draw valid conclusions.
Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Must be literate in engineering, R&D, maintenance, quality, production, scheduling, forecasting, SAP, finance, EH&S, and will assist in plant management Process oriented Outside of the box thinking Business comprehension
BENEFITS AND COMPENSATION:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Corsicana, Texas
Posted: 2025-05-05 23:09:26
-
33 days paid holidays , Permanent Position, OT available, Pension Contribution of up to 5% , 4 Day working week, well established market leading manufacturing company
We are looking to recruit a Mechanical Fitter, for a national Market Leading vehicle building company.
Location of role: Warwick
We welcome applications from a Mechanical Fitting or Fabricator Welder background, vehicle building, vehicle manufacture and vehicle repair background
Strong fabrication and welding skills with a recognised vocational qualification.
2 years' experience working in a Manufacturing Engineering or commercial vehicle industry must be able to read technical drawings and recognise welding symbols.
Used to working to tight delivery timescales
Duties of the Mechanical Fitter:
Fitters/fabricators with building chassis' of municipal vehicles.
Use of hand and power tools
Working to engineering diagrams and drawings
Measuring, marking up and using raw material such as aluminium, mild steel and stainless steel
Fabrication duties
What we need from you for the Mechanical Fitter role:
Treat H&S as the number one priority at all times.
Use the correct PPE.
Highlight any areas of risk.
Take ownership of your own quality and workmanship.
Carrying out personal inspections of own work.
Ensure that drawings, build procedures, processes and instructions are adhered to
Knowledge and experience of production processes and working to a takt time.
Previous experience in a similar role.
Ability to work in awkward, confined positions, climbing over vehicle, ability to enter/exit bodies and hoppers.
Occasional heavy lifting required.
Benefits of the Mechanical Fitter role:
33 days paid holidays
Permanent Position
OT available,
Pension Contribution of up to 5% ,
4 Day working week,
National market leading manufacturing company
If you are interested in this position, or would like to have a private and confidential chat, please contact Joe Reid at E3 Recruitment. ....Read more...
Type: Permanent Location: Warwick, England
Start: ASAP
Salary / Rate: Up to £34000 per annum
Posted: 2025-05-05 18:00:05
-
Workshop Fitter - Hagley Starting Salary: £35,000 + Quarterly BonusesMonday to Friday | Permanent PositionJoin a leading global name in the automotive industry as a Workshop Fitter, contributing to the maintenance and repair of HGVs.
This is an exciting opportunity to be part of a growing, reputable organisation known for its modern facilities and clean, well-equipped workshops.Working Hours for the Workshop Fitter - Monday - Friday, standard hours
What's in it for you as our Workshop Fitter?
Starting salary circa £35,000
Quarterly production bonuses
Overtime available and paid at a premium rate
Access to a private healthcare scheme
Stable, full-time, weekday hours with a well-established employer
Your Role: As a Workshop Fitter, you'll be working on vehicles, focusing on both bodywork and chassis-mounted equipment.
Your daily tasks will include:
Disassembling and assembling body-mounted components
Diagnosing faults on chassis-mounted systems
Reading and interpreting engineering drawings
Drilling, assembling, and fitting both interior and exterior fixtures
Carrying out light fabrication tasks - measuring, cutting, and grinding
What we're looking for: Candidates with experience in the following areas are encouraged to apply:
Vehicle body building or coachbuilding
Plant engineer
Trailer engineer
Welder/Fabricator
If you are interested in this workshop fitter role, please apply now or contact Grace at E3 Recruitment . ....Read more...
Type: Permanent Location: Stourbridge, England
Start: ASAP
Salary / Rate: £35000.00 - £38000.00 per annum
Posted: 2025-05-05 18:00:05
-
Electrical Fitter StourbridgeA growing, global automotive company are looking for an electrical fitter to help with the electrical installation of specialist HGVs.
This role is working for a well-known, reputable company within the automotive sector.
They operate in a clean modern working environment.The Electrical Fitter role offers -
Starting salary of circa £27,800
Weekly pay
Monday -Thursday (7am-5.30pm)
½ hour lunch break
Overtime paid at 1.5x hourly rates
Private healthcare scheme
20 days holiday + public holidays
An exciting opportunity to accelerate your career within a growing, global business
The Vehicle Electrical Assembler role is to assist with the manufacture of specialist vehicles, the role would suit people who have experience with electrics in some capacity - there is not an need to have experience working with vehicles directly as full training will be given.
The position would also suit experienced electricians or somebody who has recently gained an electrical qualification at college and would like to build on this to develop their career.What the Electrical Fitter role entails -
Wiring vehicles according to technical diagrams
Connecting systems to vehicles
Terminating cables, soldering and running wires
Record and monitor production progress
If you are interested in this fitter role please apply now or contact Grace Hudson-Morgan at E3 Recruitment ....Read more...
Type: Permanent Location: Stourbridge, England
Start: ASAP
Salary / Rate: Up to £27800.00 per annum
Posted: 2025-05-05 10:00:22
-
Senior Commercial Account Handler | Harrogate | Up to £40,000 | Office Based (with flexibility)
Ready to bring your years of experience to a business that values expertise and client-first thinking?
Location: Harrogate Salary: Up to £40,000 Job Type: Office Based (with flexibility)
About the Company This independent brokerage has earned a strong reputation across Yorkshire for its tailored approach and long-standing client relationships.
With a high-performing team and solid backing, they're now looking for an experienced Senior Commercial Account Handler to support their growing portfolio of SME and mid-market clients.
Role Overview You'll work alongside a close-knit team of Account Executives, playing a key role in managing client relationships and ensuring seamless policy administration.
From handling renewals and MTAs to liaising with underwriters and preparing pre-renewal reports, you'll be trusted to manage key accounts with care and precision.
Key Responsibilities
Support Account Executives in managing SME and mid-market commercial clients
Process policies, MTAs, and renewals with accuracy and attention to detail
Maintain regular client contact and respond to queries efficiently
Liaise with insurers to negotiate competitive terms and ensure smooth placement
Prepare pre-renewal and mid-term meeting reports
Keep client records compliant and up to date
Work closely with internal teams to support the wider broking process
Assist with claims handling and client updates as required
About You
5 -10 years of commercial insurance experience
Strong technical knowledge across commercial products
Experience handling SME and mid-market premiums (ideally £10k-£30k GWP)
Cert CII qualified or working towards it (support available)
Comfortable working in a fast-paced broking environment
Proficiency with Acturis preferred
Confident communicator with a strong service mindset
What's On Offer
Salary up to £40,000, depending on experience
Annual bonus based on company performance
Group pension plan and life cover
Group income protection cover
Medicash cash plan
Training and progression support including Cert CII
Flexible working hours and a supportive, well-resourced team
If you're looking for a stable role in a professional, friendly environment—where your experience will be valued and your future supported—drop me a message to learn more.
Get Recruited is acting as an Employment Agency in relation to this vacancy. ....Read more...
Type: Permanent Location: Harrogate, England
Start: ASAP
Salary / Rate: £30000.00 - £40000.00 per annum
Posted: 2025-05-05 09:58:34
-
£31,050 + Great BenefitsAn exciting new career opportunity has arisen for an accomplished, organised and highly professional individual to join a growing business.
You will be joining a team that has built long-standing commercial success and an impressive reputation for providing outstanding specialist advisory services to clients across the globe.Our client is a leading commercial barristers' chambers, with a thriving domestic and international practice, specialising in providing services across the areas of construction and engineering; energy and natural resources; infrastructure and utilities; international arbitration; IT and technology; offshore construction and marine engineering; planning and environment; procurement; competition; and associated professional negligence.The successful Receptionist / Conference Facilitator will work as the first point of contact for visitors to Chambers, creating a professional and welcoming environment for clients and other visitors.
They will provide effective and efficient support services to ensure the smooth running of front of house.
They will ensure conference suite bookings are fully planned and managed and will handle all calls to Chambers courteously and efficiently.
The ideal applicant is a diligent, confident and professional individual, able to provide the full range of reception duties in a friendly and proactive manner.
The successful candidate will report directly to the Finance and Administration Manager.Key Responsibilities
Providing a courteous service to all enquiries.
Operating the switchboard and actioning calls as appropriate.
Taking messages and ensuring they reach the appropriate person promptly.
Welcoming visitors and advising of arrivals as required or directed.
Advising clerks of clients arriving in the building.
Advising the administration department of any contractors in the building.
Providing permits to work, if appropriate.
Ensuring building security entry and exit procedures are adhered to.
Booking conference rooms on the Chambers practice management system (Lex).
Ordering lunches for conferences, meetings, etc.
Assisting with mini-pupillage and pupillage application processes.
Assisting with advertising Legal Assistant vacancy on university websites.
Keeping reception areas clean and tidy.
Booking restaurants and taxis and ordering flowers/gifts/couriers as requested.
Ordering coffee, tea, crockery, glassware, cutlery and all other sundry or stock items as required.
Receiving deliveries and liaising with the post room to ensure prompt dispatch to addressee.
Assisting the administration department with various duties.
Ensuring stock room always has sufficient wine, beer, Champagne, etc.
with fridges fully stocked.
Skills & Experience
Educated to GCSE standard as a minimum, with 5 GCSEs including English and Maths minimum grade 5 (or equivalent)
A minimum of 2 years' experience in a reception role ideally in the professional services sector
Well presented, conscientious and reliable
Excellent organisational skills
Professional with an eye for detail
Strong written and verbal communication skills including excellent telephone manner
Self-motivated and proactive with a willingness to learn
Ability to plan ahead and prioritise workloads effectively
Good IT skills with experience of O365
Benefits
20 days holiday plus bank holidays (rising to 22 days after one year and 25 days after two years)
6% pension contribution
Bonus scheme
Season ticket loan
Permanent health insurance
Private medical insurance
Half day 'birthday' holiday
This is a superb opportunity for a highly organised individual with a positive outlook, excited by the prospect of a career in a client facing role within the legal sector.
It is an ideal full-time role for a friendly individual with a professional demeanour and a client-focused attitude.
You will be part of a small team that works closely together to deliver outstanding client service.
08:00 - 17:00 Mon - Fri.
Apply now! ....Read more...
Type: Permanent Location: City of London, England
Start: ASAP
Salary / Rate: Up to £31050.00 per annum + Great Benefits
Posted: 2025-05-04 23:35:03
-
We are looking for a Supervising Social Worker for this well thought of organisation covering a caseload in the East Midlands.
There is a full-time position with hybrid working.
You must have a Diploma/Degree in Social Work and the right to work in the UK (no VISA sponsorship)
About the team
This organisation is committed to safeguarding and promoting the welfare of Children and their families and work with a therapeutic approach.
They are very creative with their work and work therapeutically.
About you
The successful candidate will have experience within Children's Social Work post qualification whilst having an up-to-date understanding of relevant legislation.
What's on offer?
Salary dependent on experience
Mileage covered
Hybrid working
Training & development opportunities
Hours: Full time / Permanent
For more information, please contact Jamil Olweny
07587 031 098 / jolweny@charecruitment.com
What do you get from working with me?
CV enhancement
Application form enhancement
Access to many jobs in the market
One central point of contact
Interview preparation assistance
Expert consultation
Questions answered
Offer negotiation
....Read more...
Type: Permanent Location: Nottinghamshire, England
Posted: 2025-05-04 20:00:11
-
We are looking for a Service Manager (Registered with OFSTED) for this well thought of organisation's Fostering service in the South West.
This is a full time position that is homeworking.
You must have a Diploma/Degree in Social Work and the right to work in the UK (no VISA sponsorship)
About the team
This organisation is committed to safeguarding and promoting the welfare of Children and their families and work with a therapeutic approach.
They are very creative with their work and have multiple Children's services.
About you
The successful candidate will have significant experience within Fostering teams, to Team Manager + level, post qualification whilst having an up-to-date understanding of relevant legislation.
You will be able to work towards your level 5 in leadership & management.
What's on offer?
Salary dependent on experience
Mileage covered
Training & development opportunities
Further benefits to be discussed
Hours: Full time / Permanent
For more information, please contact Jamil Olweny
07587 031 098 / jolweny@charecruitment.com
What do you get from working with me?
CV enhancement
Application form enhancement
Access to many jobs in the market
One central point of contact
Interview preparation assistance
Expert consultation
Questions answered
Offer negotiation
....Read more...
Type: Permanent Location: South West England, England
Salary / Rate: £55000 - £65000 per annum
Posted: 2025-05-04 19:00:11
-
We are looking for a Service Manager (Registered with OFSTED) for this well thought of organisation's Fostering service in Yorkshire.
This is a full time position that can have some homeworking.
You must have a Diploma/Degree in Social Work and the right to work in the UK (no VISA sponsorship)
About the team
This organisation is committed to safeguarding and promoting the welfare of Children and their families and work with a therapeutic approach.
They are very creative with their work and have multiple Children's services.
About you
The successful candidate will have significant experience within Fostering teams, to Team Manager + level, post qualification whilst having an up-to-date understanding of relevant legislation.
You will be able to work towards your level 5 in leadership & management.
What's on offer?
Salary dependent on experience
Mileage covered
Training & development opportunities
Further benefits to be discussed
Hours: Full time / Permanent
For more information, please contact Jamil Olweny
07587 031 098 / jolweny@charecruitment.com
What do you get from working with me?
CV enhancement
Application form enhancement
Access to many jobs in the market
One central point of contact
Interview preparation assistance
Expert consultation
Questions answered
Offer negotiation
....Read more...
Type: Permanent Location: Yorkshire and the Humber, England
Posted: 2025-05-04 18:00:02
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: The Production Assembler performs assigned tasks that include, but are not limited to, producing architectural shapes, EIFS wall components, and exterior panel systems.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Follows the daily production schedule set by the Production Supervisor Hand applies adhesive mesh to parts.
Mixes base coats and finishes with electric drill and paddle.
Works as part of a team to run parts through extrusion equipment.
Assembles and pours mold for cast stone.
Trims parts with cutting equipment. Assists in building custom crates based on project specifications.
Prepares and organizes parts for shipment.
Assists with shipping and receiving.
Follows all safety requirements.
Cleans equipment after use and assists team in keeping production space clean and organized.
Assists with monthly inventory counts.
EDUCATION REQUIREMENT: No formal educational requirement.
EXPERIENCE REQUIREMENT: No prior experience or training.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage.
Demonstrates accepted ethical and professional business behavior.
Executes ISO authority and responsibility.
Completes and maintains all required training.
Reports suspected violations including those of a business associate.
Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The hourly rate for applicants in this position generally ranges between $15.85 and $18.98.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: North Kingstown, Rhode Island
Posted: 2025-05-04 15:11:05
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: The Supply Chain Network Analyst analyzes optimization efforts, identifies business needs, tracks performance metrics, evaluates risks/opportunities and drives improvements in the supply chain process.
Effectively communicates to leadership and leads initiatives in support of the Supply Chain Optimization Manager.
ESSENTIAL DUTIES AND RESPONSIBILITIES: Works with the Optimization Manager and key stakeholders in sales, marketing, and operations to determine key supply initiatives and inventory targets. Maintain Dryvit SIOP process - monthly plant meetings and network inventory management. Analyzes data to help set DOI targets and manage deliverables for OSD reduction process and excess inventory reduction efforts.
Determines inventory needs including but not limited to quantity, quality, location, etc.
Create cross functional accountability in optimization projects.
Manage PIF process and after launch follow- ups for new products and exits.
Dryvit SKU rationalization - work with inventory specialist to analyze data, change status, and balance existing product amongst plants.
Supports the development of innovative supply chain solutions and tools to support drive strategic and tactical decision-making.
Identifies significant and/or critical supply-demand imbalances.
Works with Operations and procurement to solve and communicates with business leaders effectively and timely to allow for proactive resolution.
Assists with the development and execution of network models, capacity analysis, system standards, as well as the replenishment and redistribution of inventory within the network.
Identifies current state and potential future state flows of the fabrication, panelization, and offsite business from supply chain to internally fabricated façade finish and external third-party capacity.
Provides continuous process mapping support as new methods and sites are added to the network.
Travels to sites in the network to fully understand processes and workflows.
In scope deliverables include all upstream products that are part of the system.
Completes or leads special projects or other supply chain functions as assigned.
EDUCATION REQUIREMENT: A bachelor's degree in business or supply chain-related field.
EXPERIENCE REQUIREMENT:
Educational experience with a degree in Supply Chain or professional experience including one year in demand planning.
Hands on experience with SAP APO and BI modules utilized for demand planning, preferably in a manufacturing environment.
Experience in formulating and implementing optimization models is a plus.
Must have experience manipulating and analyzing complex, high-volume, highly dimensional data from varying sources as well as driving the collection of new data.
CERTIFICATES, LICENSES, REGISTRATIONS:
APICS preferred, or green belt desired.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Preferred SAP APO and BW knowledge.
Strong MS office skills, with advanced proficiency in Excel.
Knowledge of analytical techniques in optimization, and statistical modeling.
Strong analytical and problem-solving skills.
Ability to collaborate across the organization.
Demonstrates strong verbal and written communication skills with active listening practices.
Self-managed and motivated to contribute individually as well as a member of the team.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
BENEFITS AND COMPENSATION: The salary range for applicants in this position generally ranges between $65,000 and $75,000 plus a bonus opportunity.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2025-05-04 15:11:05
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: The Production Assembler performs assigned tasks that include, but are not limited to, producing architectural shapes, EIFS wall components, and exterior panel systems.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Follows the daily production schedule set by the Production Supervisor Hand applies adhesive mesh to parts.
Mixes base coats and finishes with electric drill and paddle.
Works as part of a team to run parts through extrusion equipment.
Assembles and pours mold for cast stone.
Trims parts with cutting equipment. Assists in building custom crates based on project specifications.
Prepares and organizes parts for shipment.
Assists with shipping and receiving.
Follows all safety requirements.
Cleans equipment after use and assists team in keeping production space clean and organized.
Assists with monthly inventory counts.
EDUCATION REQUIREMENT: No formal educational requirement.
EXPERIENCE REQUIREMENT: No prior experience or training.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage.
Demonstrates accepted ethical and professional business behavior.
Executes ISO authority and responsibility.
Completes and maintains all required training.
Reports suspected violations including those of a business associate.
Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The hourly rate for applicants in this position generally ranges between $15.85 and $18.98.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: North Kingstown, Rhode Island
Posted: 2025-05-04 15:10:45
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: The Supply Chain Network Analyst analyzes optimization efforts, identifies business needs, tracks performance metrics, evaluates risks/opportunities and drives improvements in the supply chain process.
Effectively communicates to leadership and leads initiatives in support of the Supply Chain Optimization Manager.
ESSENTIAL DUTIES AND RESPONSIBILITIES: Works with the Optimization Manager and key stakeholders in sales, marketing, and operations to determine key supply initiatives and inventory targets. Maintain Dryvit SIOP process - monthly plant meetings and network inventory management. Analyzes data to help set DOI targets and manage deliverables for OSD reduction process and excess inventory reduction efforts.
Determines inventory needs including but not limited to quantity, quality, location, etc.
Create cross functional accountability in optimization projects.
Manage PIF process and after launch follow- ups for new products and exits.
Dryvit SKU rationalization - work with inventory specialist to analyze data, change status, and balance existing product amongst plants.
Supports the development of innovative supply chain solutions and tools to support drive strategic and tactical decision-making.
Identifies significant and/or critical supply-demand imbalances.
Works with Operations and procurement to solve and communicates with business leaders effectively and timely to allow for proactive resolution.
Assists with the development and execution of network models, capacity analysis, system standards, as well as the replenishment and redistribution of inventory within the network.
Identifies current state and potential future state flows of the fabrication, panelization, and offsite business from supply chain to internally fabricated façade finish and external third-party capacity.
Provides continuous process mapping support as new methods and sites are added to the network.
Travels to sites in the network to fully understand processes and workflows.
In scope deliverables include all upstream products that are part of the system.
Completes or leads special projects or other supply chain functions as assigned.
EDUCATION REQUIREMENT: A bachelor's degree in business or supply chain-related field.
EXPERIENCE REQUIREMENT:
Educational experience with a degree in Supply Chain or professional experience including one year in demand planning.
Hands on experience with SAP APO and BI modules utilized for demand planning, preferably in a manufacturing environment.
Experience in formulating and implementing optimization models is a plus.
Must have experience manipulating and analyzing complex, high-volume, highly dimensional data from varying sources as well as driving the collection of new data.
CERTIFICATES, LICENSES, REGISTRATIONS:
APICS preferred, or green belt desired.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Preferred SAP APO and BW knowledge.
Strong MS office skills, with advanced proficiency in Excel.
Knowledge of analytical techniques in optimization, and statistical modeling.
Strong analytical and problem-solving skills.
Ability to collaborate across the organization.
Demonstrates strong verbal and written communication skills with active listening practices.
Self-managed and motivated to contribute individually as well as a member of the team.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
BENEFITS AND COMPENSATION: The salary range for applicants in this position generally ranges between $65,000 and $75,000 plus a bonus opportunity.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2025-05-04 15:10:37
-
We are recruiting for a Qualified Social Worker to join a MASH Team in the Greater Manchester area.
ONLY APPLY IF YOU ARE A QUALIFIED SOCIAL WORKER, REGISTERED WITH SOCIAL WORK ENGLAND
What's on offer?
Up to £45,718 Dependent on Experience
Mileage coverage
Flexible Working
Free Parking
Generous Annual Leave
Continuous Training Development
About the team
This team is a multi-agency collaboration working with local police, schools, and the public.
The team aims to respond to contacts made to the MASH team in a timely way to identify and secure the most appropriate service to support and safeguard the children and families.
You will need to be able to make strong evidence-based decisions in line with the practice standards and statutory duties of this team.
About you
The ideal candidate will have post-qualifying experience in child protection, children in need, safeguarding, or referral and assessment.
A degree in Social Work (Degree/DipSW/CQSW).
You will also need to be Social Work England Registered.
Job type: Full-time
For more information, please get in contact:
Samantha Cunningham, scunningham@charecruitment.com, 07825213518
What do you get from working with me?
CV enhancement
Application form enhancement
Access to many jobs in the market
One central point of contact
Interview preparation assistance
Expert consultation
Questions answered
Offer negotiation
....Read more...
Type: Permanent Location: Greater Manchester, England
Salary / Rate: £36648 - £45718 per annum + benefits
Posted: 2025-05-04 11:00:04
-
JOB DESCRIPTION
Employer Description
Legend Brands, an industry leader and long standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
Job Summary
Under general supervision, the Manufacturing Engineer (MfgE) I/II/Senior is responsible for developing, implementing, directing and coordinating manufacturing materials and processes to achieve the most efficient, cost effective and high-quality production possible in a safe and environmentally responsible manner.
The MfgE is responsible for leading the transition from new product development to manufacturing; providing daily manufacturing support for existing products; and leading implementation of design changes and quality improvements.
The MfgE works closely with all functional groups to develop robust, cost-effective manufacturing and assembly processes and related documentation for use throughout the manufacturing facility.
The MfgE drives continuous improvement and best practices by applying lean methods to eliminate waste in the value stream.
Supervision Responsibility
None
Essential Duties
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
Reasonable accommodations may be made to enable qualified individuals with a disability to perform the essential duties.
The list below is intended to be illustrative of the responsibilities of this position and is not all encompassing, nor does it constitute an employment agreement, and the duties may change at any time. Analyze, develop, and recommend design approaches to meet production requirements for new or improved products and/or processes using a Design for Manufacturing (DFM) and Design for Quality (DFQ) methods. Help coordinate manufacturing launch of new/revised products including tooling, equipment, methods and shop floor support. Create Engineering Change Orders (ECOs) and drawing package updates to support implementation of new product development efforts and changes to existing products. Specify/Design and coordinate fabrication of patterns, molds, fixtures, and gauges required in the manufacture of components and assemblies. Provide shop floor support, interfacing with other functional groups as required, to resolve processing issues with sound, lasting, corrective actions. Participate in "make/buy" decisions to determine the most cost-effective manner in which to manufacture hardware. Review new tooling (injection mold, vacuum form, and rotomold) packages to ensure all tooling meets part design and manufacturing requirements. Establish process control parameters and help to define Standard Work to optimize efficiency and First Pass Yield (FPY). Analyze space requirements and workflow, and design the layout of equipment and workstations to ensure maximum efficiency and an ergonomically sound work environment. Perform research and development of manufacturing processes including production flow, assembly methods and production equipment.
Conduct studies and evaluations aimed at developing new technologies to reduce cost/lead time, and improve quality/product flow Performs other related duties as assigned.
Minimum Qualifications
The requirements listed below are representative of the education, experience, certification and/or licensure required.
An equivalent combination of education and experience to perform the essential duties and meet the necessary employment standards may be considered.
Education and Experience
Bachelor's Degree in Manufacturing Engineering or Mechanical Engineering required. ________________________________________________________________________
Manufacturing Engineer II
This is the next level of the Manufacturing Engineer series and is required to have a minimum of 4 years of previous experience and working knowledge and competent demonstration of the following: Design for Manufacturing and Design for Quality in new products and changes to existing products to improve process efficiency, ergonomics, tooling/fixturing, etc. Ability to address issues in the manufacturing environment through development of process improvements Support new product development early in the product design phase to ensure DFM and DFQ are considered and implemented early in the project. Strong SolidWorks design and drawing package skills that meet project deadlines and internal/external customer needs. Demonstrated team leadership with strong communication skills. This level requires the following certifications: SolidWorks CAD Design Professional (CSWP) Manufacturing Engineer II perform broader range of duties, proven skillset to fully perform Manufacturing Engineer responsibilities, more technically complex tasks, expected to set an example of professional efficiency, and provide technical direction to less experienced staff.
May also operate more than one station. The Manufacturing Engineer II receives minimal instruction or assistance and is fully aware of the operating procedures and policies associated with the department. ____________________________________________________________________________
Senior Manufacturing Engineer
This is the senior level of the Manufacturing Engineer series and is required to have a minimum of 7 years of previous experience and working knowledge and competent demonstration of the following: All the skills listed in MfgE II position with greater experience and understanding of plastics injection molding part design and processes. Proven leadership ability to lead groups through the implementation of a new product and/or process change. Strong design skills in tooling/fixturing/jigs for production. Understanding and deployment of Design of Experiments methodologies to uncover optimum processing conditions. Excellent analytical skills in the areas of process efficiency to focus efforts on "bottle neck" elimination and develop justification for capital improvements. This level requires the following certifications: Design of Experiments SolidWorks Administration PDM (CPAP) Senior Manufacturing Engineer perform broader skilled work and specialize in one trade or craft but perform work in a variety of disciplines.
The Senior Manufacturing Engineer receives minimal instruction or assistance and is fully aware of the operating procedures and policies associated with the department.
_________________________________________________________________________
Hiring Range
Between $86K - $105K annually
Benefits
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, leaves of absence, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability. Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's All job offers are contingent upon satisfactory pre-employment drug test and background screening. Accepting applications through June 30, 2025.
Applications will be reviewed as received and on-going interviews will be conducted as necessary. Apply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2025-05-03 23:10:58
-
JOB DESCRIPTION
Employer Description:
Legend Brands, an industry leader and long standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
Job Summary
The EHS Manager is responsible for providing leadership for the EHS staff to implement EHS standards & procedures, provide expert technical assistance on EHS issues and will partner with functional leadership on compliance, project management, environmental compliance, reporting matters and related EHS management issues for all Legend Brands facilities.
Essential Duties
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
Reasonable accommodations may be made to enable qualified individuals with a disability to perform the essential duties.
The below list is intended to be illustrative of the responsibilities of this position and is not all encompassing.
This job description does not constitute an employment agreement and may change these duties at any time. Safety audit process, reporting, and develop action items to drive improved safety culture. Completes required air permit reports. Completes wastewater reports Maintains EHS records.
Coordinates with Production Manager and facility managers on preventive safety and environmental related issues.
Ensures compliance with all safety standards and compliance for the States and local jurisdictions where we have operations. Assists in gathering data for environmental reports. Oversees Inspection of facilities to identify safety, health, and environmental risks.
Proactive in addressing preventative issues. Develops and implements inspection policies and procedures, and schedules routine inspections.
Develops health, safety, and environmental procedures for all areas of the company.
Investigates any safety incidents, provide root cause analysis, and set plans to address improvement opportunities.
Works with various contractors/vendors as needed. Prepares and schedules training to cover emergency procedures, workplace safety, and other relevant topics.
Monitors compliance with safety procedures.
Drafts inspection reports to document inspection findings.
Maintains records of discharge of, or employee exposure to, hazardous waste and/or pollutants, as required.
Completes all required OSHA forms and postings. Performs other related duties as assigned.
Minimum Qualifications
The requirements listed below are representative of the education, experience, certification and/or licensure required.
An equivalent combination of education and experience to perform the essential duties and meet the necessary employment standards may be considered. Bachelor's degree required in field related to Environmental, Health, and/or Safety.
Minimum 5 years' management level experience required, ideally in manufacturing environment. Certification in one or more of the following is required: Certified Safety Professional Certifies Hazardous Materials Manager Certified CPR/First Aid Trainer OSHA 30-Hour OSHA Course Preferred certifications: HAZWOPER 24-Hour Training Root Cause Analysis Training Demonstrated ability to work efficiently/independently with minimal supervision. Ability to stay calm and lead under stressful conditions. Ability to travel up to 15%. Capacity to maintain a high level of confidentiality.
Employment Standards
The requirements listed below are representative of the knowledge, skill, and/or ability required. Knowledge of relevant local, state, and federal EHS regulations Knowledge and/or experience in worker exposure assessments. Knowledge of statistics, data collection and analysis. Skill in the training and supervision of others. Skill in managing multiple tasks, projects, and deadlines, ensuring that all aspects of EHS management are addressed in a timely manner. Skill in motivating site leadership and employees to adhere to safety protocols and implementing new policies and procedures effectively. Ability to lead EHS reviews of new and existing processes. Ability to quickly and effectively solve problems. Ability to maintain a level of confidentiality. Ability to perform well under pressure, manage competing demands, and deal with frequent changes, delays, and unexpected events while meeting deadlines and necessary objectives. Ability to work efficiently/independently with minimal supervision. Ability to develop a great team. Ability to travel to other locations as needed. Ability to identify, define, analyze, and prioritize opportunities and problems, collect data, establish facts, draw valid conclusions, and solve problems efficiently.
Hiring Range:
Between $102,000 - $120,000 annually.
Benefits:
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, leaves of absence, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations:
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's All job offers are contingent upon satisfactory pre-employment drug test and background screening Accepting applications through June 30, 2025.
Applications will be reviewed as received and on-going interviews will be conducted as necessary Apply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2025-05-03 23:10:58
-
JOB DESCRIPTION
The Intern will have the opportunity to learn, experience, and contribute to the operations of the liquids roofing plant.
The Intern will develop an understanding of the relationship between the manufacturing process and various support teams with a focus on safety, product quality testing, and process validation and improvement.
This position will spend a significant amount of time in the lab and on the plant floor.
ESSENTIAL DUTIES AND RESPONSIBILITIES: List the job's essential or most important functions and responsibilities.
Include all important aspects of the job -- whether performed daily, weekly, monthly, or annually; and any that occur at irregular intervals.
• Assist quality/EH&S team in performing routine tests accurately and timely to determine if the products meet product specifications and approve product for shipping and filling.• Manage retain room filing and disposal.• Sustain lab 5S (QC lab and retain room).• Participate in product quality projects with root cause investigations and effective corrective actions with the goal of preventing customer complaints and reducing internal rework.• Lead small project for quality improvement through test, data collection, and analysis.• Other tasks and projects as assigned.
The hourly range for applicants depends upon where the applicant is in their studies.
This is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-05-03 23:10:51
-
JOB DESCRIPTION
Employer Description
Legend Brands, an industry leader and long standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
Job Summary
Under general supervision, the Manufacturing Engineer (MfgE) I/II/Senior is responsible for developing, implementing, directing and coordinating manufacturing materials and processes to achieve the most efficient, cost effective and high-quality production possible in a safe and environmentally responsible manner.
The MfgE is responsible for leading the transition from new product development to manufacturing; providing daily manufacturing support for existing products; and leading implementation of design changes and quality improvements.
The MfgE works closely with all functional groups to develop robust, cost-effective manufacturing and assembly processes and related documentation for use throughout the manufacturing facility.
The MfgE drives continuous improvement and best practices by applying lean methods to eliminate waste in the value stream.
Supervision Responsibility
None
Essential Duties
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
Reasonable accommodations may be made to enable qualified individuals with a disability to perform the essential duties.
The list below is intended to be illustrative of the responsibilities of this position and is not all encompassing, nor does it constitute an employment agreement, and the duties may change at any time. Analyze, develop, and recommend design approaches to meet production requirements for new or improved products and/or processes using a Design for Manufacturing (DFM) and Design for Quality (DFQ) methods. Help coordinate manufacturing launch of new/revised products including tooling, equipment, methods and shop floor support. Create Engineering Change Orders (ECOs) and drawing package updates to support implementation of new product development efforts and changes to existing products. Specify/Design and coordinate fabrication of patterns, molds, fixtures, and gauges required in the manufacture of components and assemblies. Provide shop floor support, interfacing with other functional groups as required, to resolve processing issues with sound, lasting, corrective actions. Participate in "make/buy" decisions to determine the most cost-effective manner in which to manufacture hardware. Review new tooling (injection mold, vacuum form, and rotomold) packages to ensure all tooling meets part design and manufacturing requirements. Establish process control parameters and help to define Standard Work to optimize efficiency and First Pass Yield (FPY). Analyze space requirements and workflow, and design the layout of equipment and workstations to ensure maximum efficiency and an ergonomically sound work environment. Perform research and development of manufacturing processes including production flow, assembly methods and production equipment.
Conduct studies and evaluations aimed at developing new technologies to reduce cost/lead time, and improve quality/product flow Performs other related duties as assigned.
Minimum Qualifications
The requirements listed below are representative of the education, experience, certification and/or licensure required.
An equivalent combination of education and experience to perform the essential duties and meet the necessary employment standards may be considered.
Education and Experience
Bachelor's Degree in Manufacturing Engineering or Mechanical Engineering required. ________________________________________________________________________
Manufacturing Engineer II
This is the next level of the Manufacturing Engineer series and is required to have a minimum of 4 years of previous experience and working knowledge and competent demonstration of the following: Design for Manufacturing and Design for Quality in new products and changes to existing products to improve process efficiency, ergonomics, tooling/fixturing, etc. Ability to address issues in the manufacturing environment through development of process improvements Support new product development early in the product design phase to ensure DFM and DFQ are considered and implemented early in the project. Strong SolidWorks design and drawing package skills that meet project deadlines and internal/external customer needs. Demonstrated team leadership with strong communication skills. This level requires the following certifications: SolidWorks CAD Design Professional (CSWP) Manufacturing Engineer II perform broader range of duties, proven skillset to fully perform Manufacturing Engineer responsibilities, more technically complex tasks, expected to set an example of professional efficiency, and provide technical direction to less experienced staff.
May also operate more than one station. The Manufacturing Engineer II receives minimal instruction or assistance and is fully aware of the operating procedures and policies associated with the department. ____________________________________________________________________________
Senior Manufacturing Engineer
This is the senior level of the Manufacturing Engineer series and is required to have a minimum of 7 years of previous experience and working knowledge and competent demonstration of the following: All the skills listed in MfgE II position with greater experience and understanding of plastics injection molding part design and processes. Proven leadership ability to lead groups through the implementation of a new product and/or process change. Strong design skills in tooling/fixturing/jigs for production. Understanding and deployment of Design of Experiments methodologies to uncover optimum processing conditions. Excellent analytical skills in the areas of process efficiency to focus efforts on "bottle neck" elimination and develop justification for capital improvements. This level requires the following certifications: Design of Experiments SolidWorks Administration PDM (CPAP) Senior Manufacturing Engineer perform broader skilled work and specialize in one trade or craft but perform work in a variety of disciplines.
The Senior Manufacturing Engineer receives minimal instruction or assistance and is fully aware of the operating procedures and policies associated with the department.
_________________________________________________________________________
Hiring Range
Between $86K - $105K annually
Benefits
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, leaves of absence, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability. Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's All job offers are contingent upon satisfactory pre-employment drug test and background screening. Accepting applications through June 30, 2025.
Applications will be reviewed as received and on-going interviews will be conducted as necessary. Apply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2025-05-03 23:10:42
-
JOB DESCRIPTION
Employer Description:
Legend Brands, an industry leader and long standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
Job Summary
The EHS Manager is responsible for providing leadership for the EHS staff to implement EHS standards & procedures, provide expert technical assistance on EHS issues and will partner with functional leadership on compliance, project management, environmental compliance, reporting matters and related EHS management issues for all Legend Brands facilities.
Essential Duties
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
Reasonable accommodations may be made to enable qualified individuals with a disability to perform the essential duties.
The below list is intended to be illustrative of the responsibilities of this position and is not all encompassing.
This job description does not constitute an employment agreement and may change these duties at any time. Safety audit process, reporting, and develop action items to drive improved safety culture. Completes required air permit reports. Completes wastewater reports Maintains EHS records.
Coordinates with Production Manager and facility managers on preventive safety and environmental related issues.
Ensures compliance with all safety standards and compliance for the States and local jurisdictions where we have operations. Assists in gathering data for environmental reports. Oversees Inspection of facilities to identify safety, health, and environmental risks.
Proactive in addressing preventative issues. Develops and implements inspection policies and procedures, and schedules routine inspections.
Develops health, safety, and environmental procedures for all areas of the company.
Investigates any safety incidents, provide root cause analysis, and set plans to address improvement opportunities.
Works with various contractors/vendors as needed. Prepares and schedules training to cover emergency procedures, workplace safety, and other relevant topics.
Monitors compliance with safety procedures.
Drafts inspection reports to document inspection findings.
Maintains records of discharge of, or employee exposure to, hazardous waste and/or pollutants, as required.
Completes all required OSHA forms and postings. Performs other related duties as assigned.
Minimum Qualifications
The requirements listed below are representative of the education, experience, certification and/or licensure required.
An equivalent combination of education and experience to perform the essential duties and meet the necessary employment standards may be considered. Bachelor's degree required in field related to Environmental, Health, and/or Safety.
Minimum 5 years' management level experience required, ideally in manufacturing environment. Certification in one or more of the following is required: Certified Safety Professional Certifies Hazardous Materials Manager Certified CPR/First Aid Trainer OSHA 30-Hour OSHA Course Preferred certifications: HAZWOPER 24-Hour Training Root Cause Analysis Training Demonstrated ability to work efficiently/independently with minimal supervision. Ability to stay calm and lead under stressful conditions. Ability to travel up to 15%. Capacity to maintain a high level of confidentiality.
Employment Standards
The requirements listed below are representative of the knowledge, skill, and/or ability required. Knowledge of relevant local, state, and federal EHS regulations Knowledge and/or experience in worker exposure assessments. Knowledge of statistics, data collection and analysis. Skill in the training and supervision of others. Skill in managing multiple tasks, projects, and deadlines, ensuring that all aspects of EHS management are addressed in a timely manner. Skill in motivating site leadership and employees to adhere to safety protocols and implementing new policies and procedures effectively. Ability to lead EHS reviews of new and existing processes. Ability to quickly and effectively solve problems. Ability to maintain a level of confidentiality. Ability to perform well under pressure, manage competing demands, and deal with frequent changes, delays, and unexpected events while meeting deadlines and necessary objectives. Ability to work efficiently/independently with minimal supervision. Ability to develop a great team. Ability to travel to other locations as needed. Ability to identify, define, analyze, and prioritize opportunities and problems, collect data, establish facts, draw valid conclusions, and solve problems efficiently.
Hiring Range:
Between $102,000 - $120,000 annually.
Benefits:
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, leaves of absence, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations:
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's All job offers are contingent upon satisfactory pre-employment drug test and background screening Accepting applications through June 30, 2025.
Applications will be reviewed as received and on-going interviews will be conducted as necessary Apply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2025-05-03 23:10:42
-
JOB DESCRIPTION
The Intern will have the opportunity to learn, experience, and contribute to the operations of the liquids roofing plant.
The Intern will develop an understanding of the relationship between the manufacturing process and various support teams with a focus on safety, product quality testing, and process validation and improvement.
This position will spend a significant amount of time in the lab and on the plant floor.
ESSENTIAL DUTIES AND RESPONSIBILITIES: List the job's essential or most important functions and responsibilities.
Include all important aspects of the job -- whether performed daily, weekly, monthly, or annually; and any that occur at irregular intervals.
• Assist quality/EH&S team in performing routine tests accurately and timely to determine if the products meet product specifications and approve product for shipping and filling.• Manage retain room filing and disposal.• Sustain lab 5S (QC lab and retain room).• Participate in product quality projects with root cause investigations and effective corrective actions with the goal of preventing customer complaints and reducing internal rework.• Lead small project for quality improvement through test, data collection, and analysis.• Other tasks and projects as assigned.
The hourly range for applicants depends upon where the applicant is in their studies.
This is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-05-03 23:10:17
-
We are recruiting for a Qualified Social Worker to join a Independent Fostering Agency.
PLEASE ONLY APPLY IF YOU ARE A QUALIFIED SOCIAL WORKER, REGISTERED WITH SOCIAL WORK ENGLAND AND HAVE RIGHT TO WORK IN THE UK WITH UK EXPERIENCE
What's on offer?
A salary of up to £41,000
Hybrid working (2/3 days a week in the office)
Work/life balance
Critical injury insurance cover paid for by the company
Training & development opportunities
Starting annual leave package at 25 days plus bank holidays and increasing to 30 days plus bank holidays with length of service
Additional annual leave given during Christmas and new year (outside the annual leave allowance)
About the team
The team aims to provide children and local authorities with fully trained, compassionate, and competent foster care when they need it most.
You will be undertaking support and supervision visits to provide placement management, planning, and intervention to ensure the children's care and development needs are met.
About you
The ideal candidate will have post-qualifying experience in Children's Social Work.
A degree in Social Work (Degree/DipSW/CQSW).
You will also need to be Social Work England Registered.
Job type: Full-time
For more information, please get in contact:
Samantha Cunningham, scunningham@charecruitment.com, 07825213518
What do you get from working with me?
CV enhancement
Access to many jobs in the market
One central point of contact
Interview preparation assistance
Expert consultation
Offer negotiation
....Read more...
Type: Permanent Location: Bristol, England
Salary / Rate: £38600 - £41000 per annum + benefits
Posted: 2025-05-03 17:00:04
-
JOB DESCRIPTION
Short Description for Internal Candidates Maintenance Mechanic Description for Internal Candidates As our Maintenance Mechanic you are to maintain the facility and utilities to allow for efficient and safe production of quality product. Here's what you can expect every day: Repair or replace defective equipment parts, using hand tools and power tools, and reassemble equipment. Perform general cleaning duties of buildings or properties. Propose changes to Maintenance Supervisor. Comply with safety regulations and maintain clean and orderly work areas. Perform other work-related duties as assigned. Schedule and or work with contractors on building maintenance related activities Use hand tools and power tools in making facility maintenance repairs. Clean or lubricate shafts, bearings, gears, or other parts of machinery. Preferred Skills: 1+ years of experience in manufacturing environment Ability to do basic math. Accurately enter and retrieve computer data. Ability to solve problems in a team environment. Willing to work overtime as required. Job Type: Full-time Pay: $18.00 - $25.00 per hour.
This position is bonus eligible.
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401(k) matching Employee Stock Purchase Plan Dental insurance Employee assistance program Flexible spending account Health insurance Life insurance Paid time off Referral program Tuition reimbursement Vision insurance Pension Schedule: 8-hour shift TCI is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Ellaville, Georgia
Posted: 2025-05-03 15:11:53
