-
JOB DESCRIPTION
We are seeking experienced Commercial Roofers to join our team.
The skilled Commercial Roofers will be responsible for the maintenance, repairs, and installation of commercial roofing systems.
Benefits:
401K Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Installation of different types of roofing systems such as BUR, EPDM, Single-ply, coatings, and other forms of low-slope roofing systems Safe operation of tools of the trade (hand tools, power tools etc.) Follow OSHA regulations and other regulatory agencies relating to job site safety, demonstrates safe work practices. Work outside in a wide variety of weather conditions and to meet the physical demands of the position, including mobility needed to complete tasks. Climbing and operating on ladders, able to handle at least 50 lbs. Effective communication with foremen, supervisors, and other WTI and Tremco employees
Job Requirements:
Commercial Roofing: All levels; at least 1 year preferred Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical
The hourly rate for applicants in this position generally ranges between $20 and $33.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Benefits: Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
$20.00-$33.00/hora Buscamos techadores comerciales con experiencia para unirse a nuestro equipo.
Los techadores comerciales calificados serán responsables del mantenimiento, las reparaciones y la instalación de los sistemas de techado comerciales.
BENEFICIOS
401KSeguro de saludTiempo libre pagadoReembolso de millasEducación continua
DEBERES Y RESPONSABILIDADES DE EL PUESTO
Instalación de diferentes tipos de sistemas de techado como BUR, EPDM, de una sola capa, revestimientos y otras formas de sistemas de techado de pendiente baja Operación segura de herramientas del oficio (herramientas manuales, herramientas eléctricas, etc.) Siga las regulaciones de OSHA y otras agencias reguladoras relacionadas con la seguridad en el lugar de trabajo, demostrar prácticas de trabajo seguras. Trabaje al aire libre en una amplia variedad de condiciones climáticas y para cumplir con las demandas físicas del puesto, incluida la movilidad necesaria para completar las tareas. Subir y operar en escaleras, capaz de manejar al menos 50 lbs. Comunicación efectiva con capataces, supervisores y otros empleados de WTI y Tremco
REQUISITOS DEL TRABAJO
Techos Comerciales: Todos los niveles; al menos 1 año preferido Medio de transporte confiable Verificación de antecedentes aceptable según los estándares de la empresa Capacidad para pasar una prueba de drogas previa al empleo y examen físico Los solicitantes calificados recibirán consideración para el empleo sin importar su raza, color, religión, origen nacional, sexo, orientación sexual, identidad de género, estado de veterano protegido o discapacidad. Tipo de puesto: Medio tiempo Salario: $20.00 - $33.00 la hora
ABOUT US
Tremco Construction Products Group (CPG) brings together Tremco Incorporated's Commercial Sealants & Waterproofing and Roofing & Building Maintenance operating divisions; Dryvit Systems, Inc.; Nudura Inc.; Willseal; Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada, Inc.
Structures with Tremco CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
Six-sided solutions from Tremco CPG companies deliver demonstrable performance at the lowest possible life-cycle cost, and stop leaks before they happen through ongoing maintenance programs.
Building owners gain the peace of mind that comes with industry-leading system warranties - all from a single source platform.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cincinnati, Ohio
Posted: 2025-06-28 23:10:10
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
This position performs diagnostic various onsite inspections for customers as well as other inspection services
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform/assist with diagnostic roof inspections, including Infrared, Nuclear, visual, & other inspection services, along with related information gathering and verification tasks.
Work with Lead Diagnostics Technician Collaborate with other Field Supervisors as necessary. Assist with the Quality Control (QC) process of all diagnostic jobs, including the proper documentation, to ensure that all work was completed properly and that the customer was fully satisfied. Conduct and foster professional and timely communication (via email, voicemail, in person) with the customers, sales reps, field staff, and internal company personnel on all diagnostic related matters. Serve as a contact for the office personnel if there are any problems concerning a diagnostic issue. Project a professional appearance and demeanor at all times while completing services for a customer. In conjunction with the Manager of Diagnostic Services, assist in the training of other field personnel on diagnostic tools, techniques, processes, etc. Proper completion of all services and related paperwork. Participate in all safety trainings and complete any required documentation. Perform any other duty and/or project as required or assigned by the Manager of Diagnostic Services or the VP of General Services
ADDITIONAL SKILLS AND QUALIFICATIONS:
Prior roofing inspection and diagnostic experience Prior roofing experience, including patch and repair skills Knowledge of Project Management, planning, and scheduling skills Knowledge and experience in monitoring and maintaining Quality Control Functional computer skills Prior safety training and complete a minimum of 10-hour OSHA certification Planning and organizational skills.
Able to juggle multiple priorities and demonstrate good task management Ability to work independently Excellent customer service skills and ability to build relationships Ability to climb up and down interior/exterior ladders to access roofs (minimum of 20 ft.) and carry basic hand tools, equipment, and/or material up to approx.
75 lbs.
over long distances Capable of walking along rooftop edges (no fear of heights, good balance, etc.) Ability to handle prolonged exposure to outside weather conditions (heat, cold, etc.)
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: New York, New York
Posted: 2025-06-28 23:10:02
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
The WTI Field Resources Supervisor (Supervisor) is responsible for the timely delivery of services, profitability, and all employee management and training within their respective region.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Coordinate with the Field Resource Foreman (Foreman) for staffing and scheduling of all WTI Field Resources Reps (Field Reps) in their respective region to ensure proper utilization of manpower on specific jobs for the highest profitability.
Collaborate with other Supervisors as necessary.
Oversee the Quality Control (QC) process in conjunction with the Quality Control Specialist (QCS) of all the Field Reps in the region, which will include random site visits to current and previous job sites and proper documentation to ensure that all work was completed properly and that the customer is fully satisfied.
Ensure profitability within the region by monitoring and managing employee expenses for accuracy and abuse, use of overtime hours, and all full-time personnel's billable time to meet the required percentage.
The Supervisor should stress the profitability factor to all field personnel.
Field all questions and concerns from the Field Reps and handle all discrepancies between the Field Reps and the Sales Reps.
Conduct and foster professional and timely communication (via email, text message, voicemail, or in person) with the customers, Sales Reps, field staff, and internal company personnel on all work-related matters.
Be the primary contact for the office personnel if there are any issues concerning a Field Rep.
Ensure all Field Reps will have a professional appearance and demeanor while completing services for a customer.
Conduct and/or assist with the training (both hands-on field training and classroom setting) for the Field Reps, according to the WTI Training Policy, to include:
Proper completion of all services and related paperwork.
Safety training and training documentation for all Field Reps within the region.
Approval and certification of each Field Rep, including, but not limited to, OSHA Hazard Awareness, Toolbox Talks, etc.
Demonstrate a working knowledge of all services provided.
Manage, monitor, and document the performance of Field Reps and take appropriate steps or corrective measures to resolve employee and work-related issues.
Consult with the Regional Business Manager (RBM) and HR as needed.
Work with the HR and Recruiting department to hire all new personnel.
Ensure all required paperwork is submitted to the corporate office on a timely basis.
Conduct new employee orientation for all new hires, including training on all company policies, administrative processes, procedures, and required technical and safety information.
Handle all administrative matters and corresponding paperwork within the region, including, but not limited to, expense management, monthly sales projections, Field Tech time management, status reports, bidding jobs with Reps, large job sign-offs, project documentation, etc.
Review time reports daily and make necessary corrections with the admin team.
Attend all required calls and meetings.
Perform any other duties and/or projects as required or assigned by the RBM.
CERTIFICATES, LICENSES, REGISTRATIONS:
30-hour OSHA certification (The company will provide it if needed.)
Registered Roof Observer (RRO) is preferred but not required. OTHER SKILLS AND ABILITIES:
Qualifications:
Prior supervisory skills and ability to manage people and tasks.
Prior roofing experience, including patch and repair skills.
Knowledge of Project Management, planning, and scheduling.
Knowledge and experience in monitoring and maintaining quality control.
Functional computer skills.
Safety training and OSHA knowledge.
Understanding of budgeting and expense management.
Competencies:
Adaptable and willing to change with business needs.
Professional and leads by example.
Diversity awareness and ability to adjust to multiple personalities.
Planning and organizational skills.
Able to juggle multiple priorities and demonstrate good task management.
Work independently, solve problems, and delegate assignments, such as quoting and pricing.
Demonstrate a high degree of accountability and ethical behaviors.
Excellent customer service and ability to build relationships.
Other Requirements:
Ability to travel out of town, including overnight stays.
Must have reliable transportation and a valid driver's license.
Ability to work weekends and/or holidays when needed.
Ability to pass a pre-employment drug test.
Ability to read, write, and speak English.
Benefits:
Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
The salary range for applicants in this position generally ranges between $87,991.00 and $109,989.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Boston, Massachusetts
Posted: 2025-06-28 23:09:59
-
JOB DESCRIPTION
We are seeking experienced Commercial Roofers to join our team.
The skilled Commercial Roofers will be responsible for the maintenance, repairs, and installation of commercial roofing systems.
Benefits:
401K Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Installation of different types of roofing systems such as BUR, EPDM, Single-ply, coatings, and other forms of low-slope roofing systems Safe operation of tools of the trade (hand tools, power tools etc.) Follow OSHA regulations and other regulatory agencies relating to job site safety, demonstrates safe work practices. Work outside in a wide variety of weather conditions and to meet the physical demands of the position, including mobility needed to complete tasks. Climbing and operating on ladders, able to handle at least 50 lbs. Effective communication with foremen, supervisors, and other WTI and Tremco employees
Job Requirements:
Commercial Roofing: All levels; at least 1 year preferred Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical
The hourly rate for applicants in this position generally ranges between $20 and $33.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Benefits: Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
ABOUT US
Tremco Construction Products Group (CPG) brings together Tremco Incorporated's Commercial Sealants & Waterproofing and Roofing & Building Maintenance operating divisions; Dryvit Systems, Inc.; Nudura Inc.; Willseal; Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada, Inc.
Structures with Tremco CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
Six-sided solutions from Tremco CPG companies deliver demonstrable performance at the lowest possible life-cycle cost, and stop leaks before they happen through ongoing maintenance programs.
Building owners gain the peace of mind that comes with industry-leading system warranties - all from a single source platform.Apply for this ad Online! ....Read more...
Type: Permanent Location: Tallahassee, Florida
Posted: 2025-06-28 23:09:58
-
JOB DESCRIPTION
Position Summary:
Carboline is seeking an EH&S Specialist located at our manufacturing facility in Lake Charles, LA. This person would be responsible for implementing and managing the environmental, health, safety, security, and emergency response programs for the local production and distribution facility.
We are looking for a dynamic trainer and behavior-based safety implementer for this facility.
This position will involve spending a lot of time on the production floor interacting with employees and supervisors identifying improvements in best practices and improving safety within processes.
PSM experience, hazardous waste management and someone that has worked within a Chemical processing facility is preferred.
Requirements:
Minimum of a BS degree in a safety, regulatory, or chemical related discipline or equivalent experience.
Minimum of 5 years of practical experience in safety, regulatory, and/or chemical fields.
Proven experience as safety manager.
Ability to produce reports and develop relevant policies.
Experience in data analysis and risk assessment.
Excellent organizational and motivational skills.
Outstanding attention to detail and observation ability.
Exceptional communication and interpersonal abilities.
Proven experience as a safety manager.
Ability to produce reports and develop relevant policies.
Strong working knowledge of the OSHA process safety management regulations (PSM) elements:
Training
Contractor Safety
PSSR
Permit to Work
Incident Investigation
MOC (program oversight)
Compliance audits
Emergency planning and response
Overall written program maintenance
Physical Requirements:
This position requires some physical activity including but not limited to standing/kneeling/walking/sitting on concrete for approximately 50% of workday.
This position could also require computer usage for an extended period of time - up to 8 hours in a day.
Lifting up to 50 pounds; exposure to dust and chemicals including but not limited to: Amines, Polyamides, Isocyanates, Epoxies, Alkyds, Acrylics, and certain inorganic compounds.
Personal protective equipment would be utilized.
This position will require travel by air and/or car including nighttime and overnight up to 25% of the time.
Essential Functions:
Ensure compliance with all local, state, and federal EH&S regulations including written programs, record keeping, reports, inspections, monitoring, testing, and training.
Maintain compliance with environmental regulations (Title40CFR) including specifically, but not limited to:
Solid and Hazardous Waste management and disposal
Clean Air Act compliance
Clean Water Act compliance
Emergency Response
Pollution Prevention Planning and Control
Establish local EH&S goals and objectives along with the timely and accurate reporting mechanisms.
Coordinate the investigation of incidents (including near misses and losses) and accidents to determine root causes and assist in the development of corrective and preventive action plans.
Serve as the site liaison to local emergency response providers.
Develop and conduct environmental, safety and health training programs to ensure employee's knowledge, understanding and adherence to safety and environmental regulations.
Serve as Facility Security Officer to implement and maintain facility security requirements as required by the Department of Homeland Security.
Conduct EH&S reviews for new product development, facility modification, product manufacturing modifications and new equipment/machinery installations per the OSHA PSM standard.
Create and update compliance-related standard operating procedures (SOPs) and job hazard analysis (JHAs).
Administer and monitor industrial hygiene sampling and communicate exposure information and/or personal protective equipment requirements to employees.
Report on health and safety awareness, issues, and statistics.
Maintain the health & safety statistics database.
Provide coaching and support to employees, supervision, and management to proactively address safety, health, and environmental risks and concerns.
Initiate or assist in efforts to continuously improve the overall working environment in the facility.
Provide technical assistance, training, and work direction to colleagues in other departments.
Analyze problems, identifying alternative solutions, and implementing recommendations in support of the Company safety goals and objectives.
Identify potential or actual areas of non-compliance through regular auditing and inspections and ensure appropriate corrective actions are taken.
Review and develop profiles for classification of hazardous waste.
Responsible for timely disposal of process waste and waste finished goods.
Provide support to the Corporate Director of EH&S.
Perform additional duties as assigned.
Commit to the Company's safety and quality programs.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace for seven years in a row, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best"Apply for this ad Online! ....Read more...
Type: Permanent Location: Lake Charles, Louisiana
Posted: 2025-06-28 15:10:12
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
THE PROPOSED SCHEDULE FOR THIS ROLE IS A 3 DAYS ON AND 2 DAYS OFF ROTATING SCHEDULE CONSISTING OF THREE OR FOUR 12-HOUR DAYS PER WEEK.
THE HOURS ARE 6 A.M.
TO 6 P.M., SPANISH AND ENGLISH SPEAKING, PREFERRED
GENERAL PURPOSE OF THE JOB:
Hands-on leader to oversee and manage a team of assembly workers to ensure efficient, high-quality production of EIFS panels while adhering to safety and quality standards.
Demonstrate ownership and accountability for developing, growing, and continuously improving a strategic value stream to meet sales demand and volume expectations.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Develop and manage daily work/production schedules, allocate resources, and manage the workflow to ensure efficiency, timely completion of orders, and adherence to production targets.
Lead Tier 1 meetings and support Tier 2/3 meetings daily/weekly.
Plan and schedule production runs based on customer demand and agreed upon delivery dates.
Prepare and coordinate front-end set-up and planning to ensure smooth operations to meet daily production targets.
Monitor the assembly process and workflow as well as staging and packaging to identify potential issues, resolve production problems, address employee questions, and implement solutions to improve efficiency.
Drive continuous improvement initiatives to optimize processes, reduce waste, and meet quality specifications.
Recommend capital investments to automate processes.
Oversee the maintenance, repair, and set-up of production equipment to ensure maximum operating efficiency.
Work with Quality Control to conduct quality checks on completed panels to validate tolerances and specifications.
Ensure proper staging and packaging to minimize damage.
Review daily production records, identify trends, and evaluate employee performance.
Lead and motivate assembly workers, providing guidance and support on the floor side by side with the assembly team.
Oversee and guide employees in their daily tasks, including training, delegating tasks, and ensuring they adhere to company policies and procedures including those regarding safety.
Train new employees and document and provide guidance on new processes and/or equipment.
Communicate with other departments and key personnel, customer service, operations, shipping, procurement, etc.
to facilitate seamless workflow and address concerns to ensure customer expectations are understood and relevant information is shared and communicated to enhance overall customer satisfaction.
Prepare production reports and maintain records.
Ensure compliance with all company policies, safety regulations, and labor laws.
EDUCATION REQUIREMENT:
High school diploma or GED required.
Bachelor's degree in construction management, industrial manufacturing, engineering or related field preferred.
EXPERIENCE REQUIREMENT:
3-5 years of experience in manufacturing or assembly with proven supervisory skill and experience with lean manufacturing, continuous improvement, quality control, and production management.
Minimum of 2 years construction or trades experience - plastering, troweling, painting, or other application technology preferred.
Experience safely and effectively using hand tools.
Experience with CNC equipment, preferred.
CERTIFICATES, LICENSES, REGISTRATIONS:
Quality assurance or manufacturing management certifications preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Knowledge of assembly line operations and basic construction management.
Ability to read blueprints and technical designs, and translate to production assembly processes.
Ability to take and record accurate measurements.
Proven ability to plaster, trowel, paint, or other accurately apply coatings.
Knowledge of CNC programming.
Ability to safely and effectively use, operate and maintain hand tools.
Problem-solving.
Attention to detail.
Ability to work under pressure.
Strong communication and interpersonal skills.
Proficiency in relevant software including MS Office and SAP.
Bi-lingual in English and Spanish, preferred.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally ranges between $73,651 and $90,063 .
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: North Kingstown, Rhode Island
Posted: 2025-06-28 15:10:12
-
JOB DESCRIPTION
Position Summary:
Carboline is seeking an EH&S Specialist located at our manufacturing facility in Lake Charles, LA. This person would be responsible for implementing and managing the environmental, health, safety, security, and emergency response programs for the local production and distribution facility.
We are looking for a dynamic trainer and behavior-based safety implementer for this facility.
This position will involve spending a lot of time on the production floor interacting with employees and supervisors identifying improvements in best practices and improving safety within processes.
PSM experience, hazardous waste management and someone that has worked within a Chemical processing facility is preferred.
Requirements:
Minimum of a BS degree in a safety, regulatory, or chemical related discipline or equivalent experience.
Minimum of 5 years of practical experience in safety, regulatory, and/or chemical fields.
Proven experience as safety manager.
Ability to produce reports and develop relevant policies.
Experience in data analysis and risk assessment.
Excellent organizational and motivational skills.
Outstanding attention to detail and observation ability.
Exceptional communication and interpersonal abilities.
Proven experience as a safety manager.
Ability to produce reports and develop relevant policies.
Strong working knowledge of the OSHA process safety management regulations (PSM) elements:
Training
Contractor Safety
PSSR
Permit to Work
Incident Investigation
MOC (program oversight)
Compliance audits
Emergency planning and response
Overall written program maintenance
Physical Requirements:
This position requires some physical activity including but not limited to standing/kneeling/walking/sitting on concrete for approximately 50% of workday.
This position could also require computer usage for an extended period of time - up to 8 hours in a day.
Lifting up to 50 pounds; exposure to dust and chemicals including but not limited to: Amines, Polyamides, Isocyanates, Epoxies, Alkyds, Acrylics, and certain inorganic compounds.
Personal protective equipment would be utilized.
This position will require travel by air and/or car including nighttime and overnight up to 25% of the time.
Essential Functions:
Ensure compliance with all local, state, and federal EH&S regulations including written programs, record keeping, reports, inspections, monitoring, testing, and training.
Maintain compliance with environmental regulations (Title40CFR) including specifically, but not limited to:
Solid and Hazardous Waste management and disposal
Clean Air Act compliance
Clean Water Act compliance
Emergency Response
Pollution Prevention Planning and Control
Establish local EH&S goals and objectives along with the timely and accurate reporting mechanisms.
Coordinate the investigation of incidents (including near misses and losses) and accidents to determine root causes and assist in the development of corrective and preventive action plans.
Serve as the site liaison to local emergency response providers.
Develop and conduct environmental, safety and health training programs to ensure employee's knowledge, understanding and adherence to safety and environmental regulations.
Serve as Facility Security Officer to implement and maintain facility security requirements as required by the Department of Homeland Security.
Conduct EH&S reviews for new product development, facility modification, product manufacturing modifications and new equipment/machinery installations per the OSHA PSM standard.
Create and update compliance-related standard operating procedures (SOPs) and job hazard analysis (JHAs).
Administer and monitor industrial hygiene sampling and communicate exposure information and/or personal protective equipment requirements to employees.
Report on health and safety awareness, issues, and statistics.
Maintain the health & safety statistics database.
Provide coaching and support to employees, supervision, and management to proactively address safety, health, and environmental risks and concerns.
Initiate or assist in efforts to continuously improve the overall working environment in the facility.
Provide technical assistance, training, and work direction to colleagues in other departments.
Analyze problems, identifying alternative solutions, and implementing recommendations in support of the Company safety goals and objectives.
Identify potential or actual areas of non-compliance through regular auditing and inspections and ensure appropriate corrective actions are taken.
Review and develop profiles for classification of hazardous waste.
Responsible for timely disposal of process waste and waste finished goods.
Provide support to the Corporate Director of EH&S.
Perform additional duties as assigned.
Commit to the Company's safety and quality programs.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace for seven years in a row, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best"Apply for this ad Online! ....Read more...
Type: Permanent Location: Lake Charles, Louisiana
Posted: 2025-06-28 15:10:11
-
JOB DESCRIPTION
We are seeking experienced Commercial Roofers to join our team.
The skilled Commercial Roofers will be responsible for the maintenance, repairs, and installation of commercial roofing systems. Position Duties & Responsibilities:• Installation of different types of roofing systems such as BUR, EPDM, Single-ply, coatings, and other forms of low-slope roofing systems• Safe operation of tools of the trade (hand tools, power tools etc.)• Follow OSHA regulations and other regulatory agencies relating to job site safety, demonstrates safe work practices.• Work outside in a wide variety of weather conditions and to meet the physical demands of the position, including mobility needed to complete tasks.• Climbing and operating on ladders, able to handle at least 50 lbs.• Effective communication with foremen, supervisors, and other WTI and Tremco employees Job Requirements:• Commercial Roofing: All levels; at least 1 year preferred• Reliable form of transportation• Acceptable background check per company standards• Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $20 and $30.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Benefits: Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: New Castle, Delaware
Posted: 2025-06-28 15:10:10
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
THE PROPOSED SCHEDULE FOR THIS ROLE IS A 3 DAYS ON AND 2 DAYS OFF ROTATING SCHEDULE CONSISTING OF THREE OR FOUR 12-HOUR DAYS PER WEEK.
THE HOURS ARE 6 A.M.
TO 6 P.M., SPANISH AND ENGLISH SPEAKING, PREFERRED
GENERAL PURPOSE OF THE JOB:
Hands-on leader to oversee and manage a team of assembly workers to ensure efficient, high-quality production of EIFS panels while adhering to safety and quality standards.
Demonstrate ownership and accountability for developing, growing, and continuously improving a strategic value stream to meet sales demand and volume expectations.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Develop and manage daily work/production schedules, allocate resources, and manage the workflow to ensure efficiency, timely completion of orders, and adherence to production targets.
Lead Tier 1 meetings and support Tier 2/3 meetings daily/weekly.
Plan and schedule production runs based on customer demand and agreed upon delivery dates.
Prepare and coordinate front-end set-up and planning to ensure smooth operations to meet daily production targets.
Monitor the assembly process and workflow as well as staging and packaging to identify potential issues, resolve production problems, address employee questions, and implement solutions to improve efficiency.
Drive continuous improvement initiatives to optimize processes, reduce waste, and meet quality specifications.
Recommend capital investments to automate processes.
Oversee the maintenance, repair, and set-up of production equipment to ensure maximum operating efficiency.
Work with Quality Control to conduct quality checks on completed panels to validate tolerances and specifications.
Ensure proper staging and packaging to minimize damage.
Review daily production records, identify trends, and evaluate employee performance.
Lead and motivate assembly workers, providing guidance and support on the floor side by side with the assembly team.
Oversee and guide employees in their daily tasks, including training, delegating tasks, and ensuring they adhere to company policies and procedures including those regarding safety.
Train new employees and document and provide guidance on new processes and/or equipment.
Communicate with other departments and key personnel, customer service, operations, shipping, procurement, etc.
to facilitate seamless workflow and address concerns to ensure customer expectations are understood and relevant information is shared and communicated to enhance overall customer satisfaction.
Prepare production reports and maintain records.
Ensure compliance with all company policies, safety regulations, and labor laws.
EDUCATION REQUIREMENT:
High school diploma or GED required.
Bachelor's degree in construction management, industrial manufacturing, engineering or related field preferred.
EXPERIENCE REQUIREMENT:
3-5 years of experience in manufacturing or assembly with proven supervisory skill and experience with lean manufacturing, continuous improvement, quality control, and production management.
Minimum of 2 years construction or trades experience - plastering, troweling, painting, or other application technology preferred.
Experience safely and effectively using hand tools.
Experience with CNC equipment, preferred.
CERTIFICATES, LICENSES, REGISTRATIONS:
Quality assurance or manufacturing management certifications preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Knowledge of assembly line operations and basic construction management.
Ability to read blueprints and technical designs, and translate to production assembly processes.
Ability to take and record accurate measurements.
Proven ability to plaster, trowel, paint, or other accurately apply coatings.
Knowledge of CNC programming.
Ability to safely and effectively use, operate and maintain hand tools.
Problem-solving.
Attention to detail.
Ability to work under pressure.
Strong communication and interpersonal skills.
Proficiency in relevant software including MS Office and SAP.
Bi-lingual in English and Spanish, preferred.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally ranges between $73,651 and $90,063 .
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: North Kingstown, Rhode Island
Posted: 2025-06-28 15:10:08
-
JOB DESCRIPTION
We are seeking experienced Commercial Roofers to join our team.
The skilled Commercial Roofers will be responsible for the maintenance, repairs, and installation of commercial roofing systems. Position Duties & Responsibilities:• Installation of different types of roofing systems such as BUR, EPDM, Single-ply, coatings, and other forms of low-slope roofing systems• Safe operation of tools of the trade (hand tools, power tools etc.)• Follow OSHA regulations and other regulatory agencies relating to job site safety, demonstrates safe work practices.• Work outside in a wide variety of weather conditions and to meet the physical demands of the position, including mobility needed to complete tasks.• Climbing and operating on ladders, able to handle at least 50 lbs.• Effective communication with foremen, supervisors, and other WTI and Tremco employees Job Requirements:• Commercial Roofing: All levels; at least 1 year preferred• Reliable form of transportation• Acceptable background check per company standards• Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $20 and $30.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Benefits: Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: New Castle, Delaware
Posted: 2025-06-28 15:09:57
-
JOB DESCRIPTION
We are seeking experienced Commercial Roofers to join our team.
The skilled Commercial Roofers will be responsible for the maintenance, repairs, and installation of commercial roofing systems. Position Duties & Responsibilities:• Installation of different types of roofing systems such as BUR, EPDM, Single-ply, coatings, and other forms of low-slope roofing systems• Safe operation of tools of the trade (hand tools, power tools etc.)• Follow OSHA regulations and other regulatory agencies relating to job site safety, demonstrates safe work practices.• Work outside in a wide variety of weather conditions and to meet the physical demands of the position, including mobility needed to complete tasks.• Climbing and operating on ladders, able to handle at least 50 lbs.• Effective communication with foremen, supervisors, and other WTI and Tremco employees Job Requirements:• Commercial Roofing: All levels; at least 1 year preferred• Reliable form of transportation• Acceptable background check per company standards• Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $20 and $30.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Benefits: Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cherry Hill, New Jersey
Posted: 2025-06-28 15:09:56
-
JOB DESCRIPTION
Position Summary:
Carboline is seeking an EH&S Specialist located at our manufacturing facility in Green Bay, WI. This person would be responsible for implementing and managing the environmental, health, safety, security, and emergency response programs for the local production and distribution facility.
We are looking for a dynamic trainer and behavior-based safety implementer for this facility.
This position will involve spending a lot of time on the production floor interacting with employees and supervisors identifying improvements in best practices and improving safety within processes.
PSM experience, hazardous waste management and someone that has worked within a Chemical processing facility is preferred.
Requirements:
Minimum of a BS degree in a safety, regulatory, or chemical related discipline or equivalent experience.
Minimum of 5 years of practical experience in safety, regulatory, and/or chemical fields.
Proven experience as safety manager.
Ability to produce reports and develop relevant policies.
Experience in data analysis and risk assessment.
Excellent organizational and motivational skills.
Outstanding attention to detail and observation ability.
Exceptional communication and interpersonal abilities.
Proven experience as a safety manager.
Ability to produce reports and develop relevant policies.
Strong working knowledge of the OSHA process safety management regulations (PSM) elements:
Training
Contractor Safety
PSSR
Permit to Work
Incident Investigation
MOC (program oversight)
Compliance audits
Emergency planning and response
Overall written program maintenance
Physical Requirements:
This position requires some physical activity including but not limited to standing/kneeling/walking/sitting on concrete for approximately 50% of workday.
This position could also require computer usage for an extended period of time - up to 8 hours in a day.
Lifting up to 50 pounds; exposure to dust and chemicals including but not limited to: Amines, Polyamides, Isocyanates, Epoxies, Alkyds, Acrylics, and certain inorganic compounds.
Personal protective equipment would be utilized.
This position will require travel by air and/or car including nighttime and overnight up to 25% of the time.
Essential Functions:
Ensure compliance with all local, state, and federal EH&S regulations including written programs, record keeping, reports, inspections, monitoring, testing, and training.
Maintain compliance with environmental regulations (Title40CFR) including specifically, but not limited to:
Solid and Hazardous Waste management and disposal
Clean Air Act compliance
Clean Water Act compliance
Emergency Response
Pollution Prevention Planning and Control
Establish local EH&S goals and objectives along with the timely and accurate reporting mechanisms.
Coordinate the investigation of incidents (including near misses and losses) and accidents to determine root causes and assist in the development of corrective and preventive action plans.
Serve as the site liaison to local emergency response providers.
Develop and conduct environmental, safety and health training programs to ensure employee's knowledge, understanding and adherence to safety and environmental regulations.
Serve as Facility Security Officer to implement and maintain facility security requirements as required by the Department of Homeland Security.
Conduct EH&S reviews for new product development, facility modification, product manufacturing modifications and new equipment/machinery installations per the OSHA PSM standard.
Create and update compliance-related standard operating procedures (SOPs) and job hazard analysis (JHAs).
Administer and monitor industrial hygiene sampling and communicate exposure information and/or personal protective equipment requirements to employees.
Report on health and safety awareness, issues, and statistics.
Maintain the health & safety statistics database.
Provide coaching and support to employees, supervision, and management to proactively address safety, health, and environmental risks and concerns.
Initiate or assist in efforts to continuously improve the overall working environment in the facility.
Provide technical assistance, training, and work direction to colleagues in other departments.
Analyze problems, identifying alternative solutions, and implementing recommendations in support of the Company safety goals and objectives.
Identify potential or actual areas of non-compliance through regular auditing and inspections and ensure appropriate corrective actions are taken.
Review and develop profiles for classification of hazardous waste.
Responsible for timely disposal of process waste and waste finished goods.
Provide support to the Corporate Director of EH&S.
Perform additional duties as assigned.
Commit to the Company's safety and quality programs.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace for seven years in a row, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best"Apply for this ad Online! ....Read more...
Type: Permanent Location: Green Bay, Wisconsin
Posted: 2025-06-28 15:09:54
-
JOB DESCRIPTION
Position Summary:
Carboline is seeking an EH&S Specialist located at our manufacturing facility in Green Bay, WI. This person would be responsible for implementing and managing the environmental, health, safety, security, and emergency response programs for the local production and distribution facility.
We are looking for a dynamic trainer and behavior-based safety implementer for this facility.
This position will involve spending a lot of time on the production floor interacting with employees and supervisors identifying improvements in best practices and improving safety within processes.
PSM experience, hazardous waste management and someone that has worked within a Chemical processing facility is preferred.
Requirements:
Minimum of a BS degree in a safety, regulatory, or chemical related discipline or equivalent experience.
Minimum of 5 years of practical experience in safety, regulatory, and/or chemical fields.
Proven experience as safety manager.
Ability to produce reports and develop relevant policies.
Experience in data analysis and risk assessment.
Excellent organizational and motivational skills.
Outstanding attention to detail and observation ability.
Exceptional communication and interpersonal abilities.
Proven experience as a safety manager.
Ability to produce reports and develop relevant policies.
Strong working knowledge of the OSHA process safety management regulations (PSM) elements:
Training
Contractor Safety
PSSR
Permit to Work
Incident Investigation
MOC (program oversight)
Compliance audits
Emergency planning and response
Overall written program maintenance
Physical Requirements:
This position requires some physical activity including but not limited to standing/kneeling/walking/sitting on concrete for approximately 50% of workday.
This position could also require computer usage for an extended period of time - up to 8 hours in a day.
Lifting up to 50 pounds; exposure to dust and chemicals including but not limited to: Amines, Polyamides, Isocyanates, Epoxies, Alkyds, Acrylics, and certain inorganic compounds.
Personal protective equipment would be utilized.
This position will require travel by air and/or car including nighttime and overnight up to 25% of the time.
Essential Functions:
Ensure compliance with all local, state, and federal EH&S regulations including written programs, record keeping, reports, inspections, monitoring, testing, and training.
Maintain compliance with environmental regulations (Title40CFR) including specifically, but not limited to:
Solid and Hazardous Waste management and disposal
Clean Air Act compliance
Clean Water Act compliance
Emergency Response
Pollution Prevention Planning and Control
Establish local EH&S goals and objectives along with the timely and accurate reporting mechanisms.
Coordinate the investigation of incidents (including near misses and losses) and accidents to determine root causes and assist in the development of corrective and preventive action plans.
Serve as the site liaison to local emergency response providers.
Develop and conduct environmental, safety and health training programs to ensure employee's knowledge, understanding and adherence to safety and environmental regulations.
Serve as Facility Security Officer to implement and maintain facility security requirements as required by the Department of Homeland Security.
Conduct EH&S reviews for new product development, facility modification, product manufacturing modifications and new equipment/machinery installations per the OSHA PSM standard.
Create and update compliance-related standard operating procedures (SOPs) and job hazard analysis (JHAs).
Administer and monitor industrial hygiene sampling and communicate exposure information and/or personal protective equipment requirements to employees.
Report on health and safety awareness, issues, and statistics.
Maintain the health & safety statistics database.
Provide coaching and support to employees, supervision, and management to proactively address safety, health, and environmental risks and concerns.
Initiate or assist in efforts to continuously improve the overall working environment in the facility.
Provide technical assistance, training, and work direction to colleagues in other departments.
Analyze problems, identifying alternative solutions, and implementing recommendations in support of the Company safety goals and objectives.
Identify potential or actual areas of non-compliance through regular auditing and inspections and ensure appropriate corrective actions are taken.
Review and develop profiles for classification of hazardous waste.
Responsible for timely disposal of process waste and waste finished goods.
Provide support to the Corporate Director of EH&S.
Perform additional duties as assigned.
Commit to the Company's safety and quality programs.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace for seven years in a row, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best"Apply for this ad Online! ....Read more...
Type: Permanent Location: Green Bay, Wisconsin
Posted: 2025-06-28 15:09:36
-
JOB DESCRIPTION
We are seeking experienced Commercial Roofers to join our team.
The skilled Commercial Roofers will be responsible for the maintenance, repairs, and installation of commercial roofing systems. Position Duties & Responsibilities:• Installation of different types of roofing systems such as BUR, EPDM, Single-ply, coatings, and other forms of low-slope roofing systems• Safe operation of tools of the trade (hand tools, power tools etc.)• Follow OSHA regulations and other regulatory agencies relating to job site safety, demonstrates safe work practices.• Work outside in a wide variety of weather conditions and to meet the physical demands of the position, including mobility needed to complete tasks.• Climbing and operating on ladders, able to handle at least 50 lbs.• Effective communication with foremen, supervisors, and other WTI and Tremco employees Job Requirements:• Commercial Roofing: All levels; at least 1 year preferred• Reliable form of transportation• Acceptable background check per company standards• Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $20 and $30.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Benefits: Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cherry Hill, New Jersey
Posted: 2025-06-28 15:09:33
-
JOB DESCRIPTION
As our Maintenance Planner, you are responsible for analyzing the plant parts system to ensures necessary parts are on hand to minimize production downtime and maintenance repair time, while controlling spare parts inventory values, and driving improvements to key metrics such as work order completion time, breakdown reductions, and autonomous maintenance implementations.
Solving challenges is the very foundation of who we are.
After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint.
When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution.
Today, that discovery is Rust-Oleum Corporation. The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today.
When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry.
Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry. Here is what to expect: Develop and manage the engineering maintenance schedules for the plant Prioritize and schedule required preventative maintenance in coordination with Production Supervisors and Managers.
Input and maintain the maintenance data on SAP PM Generate and analyze maintenance KPIs such as work order completion time, breakdown reduction, and % completion orders.
Analyze the parts inventory system.
This includes assisting the entering of all parts transactions such as POs, issues, returns, and inventory adjustments. Maintain accurate inventory records to help perform or manage periodic cycle counts and physical inventories.
Utilize TPM to deliver maintenance initiatives on site Responsible for maintenance data capture and reporting (losses, costs, breakdown analyses, tag resolution) Maintain records such as documentation of contracts and agreements, costs, budget information for maintenance/building accounts and maintenance performance history.
Provide expertise with the computer based maintenance management system (CMMS) to schedule, document, and update all plant maintenance work orders in SAP.
Assist buyer in ordering and recommending of materials, supplies, and services to support the operation and maintenance for the facility.
Support Regulatory and Corporate Standards by maintaining accurate files and records.
Develop, plan and execute training activities to expand the skills of the team.
Analyze total cost of ownership - parts, time, and downtime for each piece of equipment.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.
Responsibilities:
Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person. Maintain a good record of attendance and punctuality. Learn all manual tasks performed within the department. Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures. Treat people with dignity and respect. Conduct all business with integrity. Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities. Follow all safety procedures and company policies. Apply for this ad Online! ....Read more...
Type: Permanent Location: Attleboro, Massachusetts
Posted: 2025-06-27 23:10:12
-
JOB DESCRIPTION
As our Maintenance Planner, you are responsible for analyzing the plant parts system to ensures necessary parts are on hand to minimize production downtime and maintenance repair time, while controlling spare parts inventory values, and driving improvements to key metrics such as work order completion time, breakdown reductions, and autonomous maintenance implementations.
Solving challenges is the very foundation of who we are.
After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint.
When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution.
Today, that discovery is Rust-Oleum Corporation. The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today.
When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry.
Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry. Here is what to expect: Develop and manage the engineering maintenance schedules for the plant Prioritize and schedule required preventative maintenance in coordination with Production Supervisors and Managers.
Input and maintain the maintenance data on SAP PM Generate and analyze maintenance KPIs such as work order completion time, breakdown reduction, and % completion orders.
Analyze the parts inventory system.
This includes assisting the entering of all parts transactions such as POs, issues, returns, and inventory adjustments. Maintain accurate inventory records to help perform or manage periodic cycle counts and physical inventories.
Utilize TPM to deliver maintenance initiatives on site Responsible for maintenance data capture and reporting (losses, costs, breakdown analyses, tag resolution) Maintain records such as documentation of contracts and agreements, costs, budget information for maintenance/building accounts and maintenance performance history.
Provide expertise with the computer based maintenance management system (CMMS) to schedule, document, and update all plant maintenance work orders in SAP.
Assist buyer in ordering and recommending of materials, supplies, and services to support the operation and maintenance for the facility.
Support Regulatory and Corporate Standards by maintaining accurate files and records.
Develop, plan and execute training activities to expand the skills of the team.
Analyze total cost of ownership - parts, time, and downtime for each piece of equipment.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.
Responsibilities:
Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person. Maintain a good record of attendance and punctuality. Learn all manual tasks performed within the department. Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures. Treat people with dignity and respect. Conduct all business with integrity. Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities. Follow all safety procedures and company policies. Apply for this ad Online! ....Read more...
Type: Permanent Location: Attleboro, Massachusetts
Posted: 2025-06-27 23:09:22
-
JOB DESCRIPTION
JOB DESCRIPTION
WAREHOUSE ASSOCIATE RESPONSIBILITIES/ESSENTIAL TASKS:
• High-energy individual with a strong work ethic
• Self-motivated with ability to work with limited supervision
• Independent decision maker as needed to accomplish tasks
• Lift and carry a minimum of 50 pounds repeatedly throughout shift
• Handling of freight as directed by Capstone management and customer, meeting company standards, customer time lines and maintaining a safe work environment
• Keeps site Supervisor and manager informed regarding conditions on the dock, accomplishments and concerns; contributes suggestions for improvements
• Ensures proper LOT rotation and including FIFO (first in-first out) and organic product handling and shipping process
• Strong organization and prioritizing skills
• Must be proficient in math
• Must be have forklift license
• Manage response to rapidly changing products on inbound and outbound
• Must be able to follow directions and work independently
• Verify all shipments are recorded and verified the accuracy of the shipment against the paperwork for incoming and outgoing shipments
• Requires high degree of attention, skills, and dexterity in the control of a forklift and stacking of the product on the pallet
• Transport selected product to designated dock area using power equipment.
• Handle all products so as not to injure teammates or damage the product, the bags or cases
• Comply effectively with company work and safety rules.
• Maintain a quality of work that limits mis picks, short and damages
• Comply with company attendance policy.
The warehouse Associate is responsible for loading or unloading pallets, bags and cases, on and off trailers and other vehicles by using a forklift, pallet jack or by hand.
• Warehouse associate is responsible for operating a forklift to move, locate, stack, Stretch wrap and count items throughout Profile Food.
Work with direct contact with customer's staff and outside delivery personnel; emphasis is placed on the ability to relate in a positive, friendly manner.
The Operator is accountable for the safe and efficient operation of the vehicle and may also be required to perform Order Filler and Checker Duties.
EDUCATION AND EXPERIENCE:
• Graduation from high school or GED equivalent
• Previous experience in shipping, receiving or other related fields.
5 years preferred.
• Ability to handle physical workload
• Ability to multi-task and prioritize
• Strong organizational skills
• Forklift Certified
• Strong knowledge of warehouse, inventory, and shipping operations methods and practices
• Ability to read, write and speak English required, bilingual skills (English/Spanish) preferred.
• Problem solving, team building, project execution and ability to multi-task
PHYSICAL REQUIREMENTS:
Some standing, walking, moving, climbing, carrying, bending, kneeling, crawling, reaching, handling, pushing and pulling.
Ability to lift 50lbs.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential tasks.
SPECIAL REQUIREMENTS:
Possession of a valid driver's license and Forklift Certification
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to medical, dental, vision, Employer paid life insurance, STD/LTD, vacation/sick days/parental leave, 401(k), employee stock purchase plan, and pension.
Hourly: $18-$21+ DOE
ABOUT US
Mantrose Group is a world leader in specialty coatings and functional blends for the food, pharmaceutical and personal care industries.
Founded more than 100 years ago, Mantrose is proud to be part of RPM International Inc., a $5.6 billion multinational company with 14,600 employees worldwide and subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
The company has a diverse portfolio with hundreds of name-brand products, many of which are leaders in the markets they serve.
Mantrose-Haeuser Co., Inc.
has been at the forefront of developing superior edible coatings and specialty products for the pharmaceutical, confectionery, agricultural, food, personal care and industrial industries for decades.
Since our company was founded over 100 years ago, we have been delivering unparalleled results to our clients for all of their coating and custom product development needs.
NatureSeal® both an industry veteran and fresh-cut produce pioneer, has been a leading expert in shelf-life extension technology worldwide.
Our patented line of products has grown exponentially, offering produce solutions to the processor, foodservice and home use markets.
Profile Food Ingredients offers a wide range of specialty product formulations for use in dairy products, baked goods, beverages, confections, nutraceuticals, dips, dressings and sauces.
Its product line promotes uniformity, enhances texture, thickens, prevents separation and extends shelf life and includes clean label, non-GMO, organic and natural solutions.
Since 1946, Holton Food Products has been helping its customers succeed by providing quality ingredients, customized product development and technical support-all fueled by strong food science and applications experience.
This dedication and know-how has enabled our customers to build appealing product lines, increase sales and improve margins.Apply for this ad Online! ....Read more...
Type: Permanent Location: Elgin, Illinois
Posted: 2025-06-27 15:10:27
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB: The WTI Field Resource Foreman (Foreman) oversees and performs the safety, efficiency, and quality of the WTI field service business.
Safety is our primary priority and will be embedded into every discussion, meeting, and project.
As the clear and established leader of the WTI crew, the Foreman is focused on safety, crew management, and efficient execution of all WTI projects assigned within their respective region.
It is the Foreman's responsibility to deliver timely service to all WTI customers and manage exposure to risks.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Conduct the daily onsite safety brief before the start of the WTI project with the Sales Rep, customer, and the WTI crew.
Inspect and ensure all surroundings, equipment, and tools and identify and discuss any safety concerns.
Complete the Daily Hazard Analysis form and submit it to the Supervisors as applicable.
Foreman also ensures that all technicians complete Daily Hazard Analysis. Ensure all project communication is completed before the start of any WTI project.
This includes but is not limited to communication with: WTI Field Resources Supervisor (Supervisor) daily and before starting new projects (ensure any/all communication with the Sales Reps is also shared with the Supervisor.
Sales Rep weekly and/or as needed and before new projects.
WTI crew members will discuss the scope of work, daily tasks, and the overall schedule. Customer/Client (as needed or required by the Sales Rep) daily and/or weekly.
Efficient management of projects will include managing the crew's start and end times, daily productivity (hours, man-days, etc.), and ensuring tools and materials are available to complete the assigned project safely and efficiently.
Complete the project per the approved scope of work or specification and after issuance by the Supervisor.
Using a designated company-mandated reporting tool, the Foreman will complete an end-of-day and/or end-of-project walk-through to ensure the quality of workmanship and address any punch list items before leaving the job site.
These items will include updates on work performed, materials consumed (T&M projects), and supplies purchased.
Ensure all WTI Field Resources Reps (Field Reps) have a professional appearance and customer interaction while completing services for a customer.
Responsible for ordering, tracking, and monitoring inventory and ensuring quarterly cycle counts are completed and submitted timely.
Provide pricing for self-performing projects over $12,500.
Submit all proposals of over $20,000 to the Supervisor for review and approval before submitting them to the GS Administrator for logging and distribution to the Sales Rep.
Monitor and manage the Field Reps.
Consult with the Supervisor to take appropriate steps or corrective measures to resolve employee work-related issues and necessary documentation.
Work with the Supervisor to elevate the issues to HR as required.
Coordinate with the Supervisor to create project schedules.
Review time reports daily and make necessary corrections with the admin team.
Attending all appropriate calls, meetings, and trainings.
Perform any other duties and/or projects as required or assigned by the Supervisor or Regional Business Manager.
OTHER SKILLS AND ABILITIES:
Ability to travel out of town, including overnight stays.
Must have reliable transportation and a valid driver's license. Ability to work weekends and/or holidays when needed. Ability to pass a pre-employment drug test.
Ability to read, write, and speak English.
30-hour OSHA certification Registered Roof Observer (RRO) preferred but not required. Minimum of five years of experience in the roofing industry.
Must be thoroughly familiar with built-up, EPDM, PVC, and other forms of low-slope roofing systems, as well as metal and other steep-sloop roofing systems, and how to repair them properly.
The salary range for applicants in this position generally ranges between $53,000 and $65,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Albuquerque, New Mexico
Posted: 2025-06-27 15:10:25
-
JOB DESCRIPTION
JOB DESCRIPTION
WAREHOUSE ASSOCIATE RESPONSIBILITIES/ESSENTIAL TASKS:
• High-energy individual with a strong work ethic
• Self-motivated with ability to work with limited supervision
• Independent decision maker as needed to accomplish tasks
• Lift and carry a minimum of 50 pounds repeatedly throughout shift
• Handling of freight as directed by Capstone management and customer, meeting company standards, customer time lines and maintaining a safe work environment
• Keeps site Supervisor and manager informed regarding conditions on the dock, accomplishments and concerns; contributes suggestions for improvements
• Ensures proper LOT rotation and including FIFO (first in-first out) and organic product handling and shipping process
• Strong organization and prioritizing skills
• Must be proficient in math
• Must be have forklift license
• Manage response to rapidly changing products on inbound and outbound
• Must be able to follow directions and work independently
• Verify all shipments are recorded and verified the accuracy of the shipment against the paperwork for incoming and outgoing shipments
• Requires high degree of attention, skills, and dexterity in the control of a forklift and stacking of the product on the pallet
• Transport selected product to designated dock area using power equipment.
• Handle all products so as not to injure teammates or damage the product, the bags or cases
• Comply effectively with company work and safety rules.
• Maintain a quality of work that limits mis picks, short and damages
• Comply with company attendance policy.
The warehouse Associate is responsible for loading or unloading pallets, bags and cases, on and off trailers and other vehicles by using a forklift, pallet jack or by hand.
• Warehouse associate is responsible for operating a forklift to move, locate, stack, Stretch wrap and count items throughout Profile Food.
Work with direct contact with customer's staff and outside delivery personnel; emphasis is placed on the ability to relate in a positive, friendly manner.
The Operator is accountable for the safe and efficient operation of the vehicle and may also be required to perform Order Filler and Checker Duties.
EDUCATION AND EXPERIENCE:
• Graduation from high school or GED equivalent
• Previous experience in shipping, receiving or other related fields.
5 years preferred.
• Ability to handle physical workload
• Ability to multi-task and prioritize
• Strong organizational skills
• Forklift Certified
• Strong knowledge of warehouse, inventory, and shipping operations methods and practices
• Ability to read, write and speak English required, bilingual skills (English/Spanish) preferred.
• Problem solving, team building, project execution and ability to multi-task
PHYSICAL REQUIREMENTS:
Some standing, walking, moving, climbing, carrying, bending, kneeling, crawling, reaching, handling, pushing and pulling.
Ability to lift 50lbs.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential tasks.
SPECIAL REQUIREMENTS:
Possession of a valid driver's license and Forklift Certification
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to medical, dental, vision, Employer paid life insurance, STD/LTD, vacation/sick days/parental leave, 401(k), employee stock purchase plan, and pension.
Hourly: $18-$21+ DOE
ABOUT US
Mantrose Group is a world leader in specialty coatings and functional blends for the food, pharmaceutical and personal care industries.
Founded more than 100 years ago, Mantrose is proud to be part of RPM International Inc., a $5.6 billion multinational company with 14,600 employees worldwide and subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
The company has a diverse portfolio with hundreds of name-brand products, many of which are leaders in the markets they serve.
Mantrose-Haeuser Co., Inc.
has been at the forefront of developing superior edible coatings and specialty products for the pharmaceutical, confectionery, agricultural, food, personal care and industrial industries for decades.
Since our company was founded over 100 years ago, we have been delivering unparalleled results to our clients for all of their coating and custom product development needs.
NatureSeal® both an industry veteran and fresh-cut produce pioneer, has been a leading expert in shelf-life extension technology worldwide.
Our patented line of products has grown exponentially, offering produce solutions to the processor, foodservice and home use markets.
Profile Food Ingredients offers a wide range of specialty product formulations for use in dairy products, baked goods, beverages, confections, nutraceuticals, dips, dressings and sauces.
Its product line promotes uniformity, enhances texture, thickens, prevents separation and extends shelf life and includes clean label, non-GMO, organic and natural solutions.
Since 1946, Holton Food Products has been helping its customers succeed by providing quality ingredients, customized product development and technical support-all fueled by strong food science and applications experience.
This dedication and know-how has enabled our customers to build appealing product lines, increase sales and improve margins.Apply for this ad Online! ....Read more...
Type: Permanent Location: Elgin, Illinois
Posted: 2025-06-27 15:10:18
-
JOB DESCRIPTION
Title: Production Supervisor
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace for seven years in a row, so culture and maintaining a safe and clean work environment is something we take very seriously. Carboline is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
Position Summary:
You will be responsible for manufacturing at acceptably efficient levels, meeting production schedules, maintaining a clean and safe work environment, maintaining employee morale, and any employee relation issues.
Essential Functions:
Enforce safety regulations, investigate accidents, complete accident reports as required and eliminate potential and actual safety hazards. Maintain a complete understanding of emergency response plans in the event of spills or other similar disasters. Must adhere to the specific facilities safety process and procedures and follow all PPE requirements.
Report all safety injuries and incidents to your supervisor and EH&S department immediately. Ensure production quality expectations are met. Responsible for understanding all aspects of production schedule. Understand shift production requirements and hold daily meetings to share information with direct reports. Assign employees to specific work stations and tasks. Advise management of equipment and staffing requirements. Maintain housekeeping standards. Interface with other supervisors on all operations, staffing, and miscellaneous issues. Run daily cycle counts.
Input inventory transactions and monitor LN for accuracy.
Responsible for physical inventory, directs cycle counting, and full physical inventories when required. Assure the following shift is properly stocked with supplies and that materials are in sufficient quantities on the production floor to assure a smooth start-up. Responsible for ensuring ISO standards and procedures are followed. Review and approve time card hours in the timekeeping system by 8:30am every Monday morning. Communicate improper equipment operation or downtime to maintenance and coordinate required repairs. Perform annual evaluations and administer training for production employees. Monitor employee performance, coach, council, motivate, and discipline as necessary. Secure and lock facility when applicable. Enforce all company policies and regulations. Follow all environmental rules and regulations to ensure hazardous materials and waste are managed in an environmentally responsible manner as required by procedure. May be required to train and certify employees on proper use of forklifts. Perform additional duties as assigned Commit to the Company's safety and quality programs.
Requirements:
High School Diploma or equivalent. 2 years Supervisory or leadership experience in a manufacturing environment.
May have to occasionally travel to other facilities or training events.
Manage 2nd shift from 2pm-10pm with possible weekends when production schedules demand additional output.
Ability to read and interpret documents such as procedure manuals, operating and maintenance manuals and safety rules.
Ability to use a computer for all company required processes, procedures, and trainings.
Desired Qualification:
Strong Excel and Microsoft skill set. Lean Manufacturing- Six Sigma- Green Belt. 2-year college degree. Union background a plus.
Physical Requirements:
Occasionally lifts, carries, and moves raw materials or company products weighing up to 100+ pounds..
Exposure to chemicals including but not limited to: Amines, Polyamides, Isocyanates, Epoxies, Alkyds, Acrylics, and certain inorganic compounds.
(Personal protective equipment would be utilized.) Standing/kneeling/walking/sitting on concrete for approximately 75% of workday.
May be required to operate fork-lift.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
This position will also have the option to work from home 1 day per week after 6 months.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best"Apply for this ad Online! ....Read more...
Type: Permanent Location: Lake Charles, Louisiana
Posted: 2025-06-27 15:10:11
-
JOB DESCRIPTION
Title: Production Supervisor
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace for seven years in a row, so culture and maintaining a safe and clean work environment is something we take very seriously. Carboline is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
Position Summary:
You will be responsible for manufacturing at acceptably efficient levels, meeting production schedules, maintaining a clean and safe work environment, maintaining employee morale, and any employee relation issues.
Essential Functions:
Enforce safety regulations, investigate accidents, complete accident reports as required and eliminate potential and actual safety hazards. Maintain a complete understanding of emergency response plans in the event of spills or other similar disasters. Must adhere to the specific facilities safety process and procedures and follow all PPE requirements.
Report all safety injuries and incidents to your supervisor and EH&S department immediately. Ensure production quality expectations are met. Responsible for understanding all aspects of production schedule. Understand shift production requirements and hold daily meetings to share information with direct reports. Assign employees to specific work stations and tasks. Advise management of equipment and staffing requirements. Maintain housekeeping standards. Interface with other supervisors on all operations, staffing, and miscellaneous issues. Run daily cycle counts.
Input inventory transactions and monitor LN for accuracy.
Responsible for physical inventory, directs cycle counting, and full physical inventories when required. Assure the following shift is properly stocked with supplies and that materials are in sufficient quantities on the production floor to assure a smooth start-up. Responsible for ensuring ISO standards and procedures are followed. Review and approve time card hours in the timekeeping system by 8:30am every Monday morning. Communicate improper equipment operation or downtime to maintenance and coordinate required repairs. Perform annual evaluations and administer training for production employees. Monitor employee performance, coach, council, motivate, and discipline as necessary. Secure and lock facility when applicable. Enforce all company policies and regulations. Follow all environmental rules and regulations to ensure hazardous materials and waste are managed in an environmentally responsible manner as required by procedure. May be required to train and certify employees on proper use of forklifts. Perform additional duties as assigned Commit to the Company's safety and quality programs.
Requirements:
High School Diploma or equivalent. 2 years Supervisory or leadership experience in a manufacturing environment.
May have to occasionally travel to other facilities or training events.
Manage 2nd shift from 2pm-10pm with possible weekends when production schedules demand additional output.
Ability to read and interpret documents such as procedure manuals, operating and maintenance manuals and safety rules.
Ability to use a computer for all company required processes, procedures, and trainings.
Desired Qualification:
Strong Excel and Microsoft skill set. Lean Manufacturing- Six Sigma- Green Belt. 2-year college degree. Union background a plus.
Physical Requirements:
Occasionally lifts, carries, and moves raw materials or company products weighing up to 100+ pounds..
Exposure to chemicals including but not limited to: Amines, Polyamides, Isocyanates, Epoxies, Alkyds, Acrylics, and certain inorganic compounds.
(Personal protective equipment would be utilized.) Standing/kneeling/walking/sitting on concrete for approximately 75% of workday.
May be required to operate fork-lift.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
This position will also have the option to work from home 1 day per week after 6 months.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best"Apply for this ad Online! ....Read more...
Type: Permanent Location: Lake Charles, Louisiana
Posted: 2025-06-27 15:10:03
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB: The WTI Field Resource Foreman (Foreman) oversees and performs the safety, efficiency, and quality of the WTI field service business.
Safety is our primary priority and will be embedded into every discussion, meeting, and project.
As the clear and established leader of the WTI crew, the Foreman is focused on safety, crew management, and efficient execution of all WTI projects assigned within their respective region.
It is the Foreman's responsibility to deliver timely service to all WTI customers and manage exposure to risks.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Conduct the daily onsite safety brief before the start of the WTI project with the Sales Rep, customer, and the WTI crew.
Inspect and ensure all surroundings, equipment, and tools and identify and discuss any safety concerns.
Complete the Daily Hazard Analysis form and submit it to the Supervisors as applicable.
Foreman also ensures that all technicians complete Daily Hazard Analysis. Ensure all project communication is completed before the start of any WTI project.
This includes but is not limited to communication with: WTI Field Resources Supervisor (Supervisor) daily and before starting new projects (ensure any/all communication with the Sales Reps is also shared with the Supervisor.
Sales Rep weekly and/or as needed and before new projects.
WTI crew members will discuss the scope of work, daily tasks, and the overall schedule. Customer/Client (as needed or required by the Sales Rep) daily and/or weekly.
Efficient management of projects will include managing the crew's start and end times, daily productivity (hours, man-days, etc.), and ensuring tools and materials are available to complete the assigned project safely and efficiently.
Complete the project per the approved scope of work or specification and after issuance by the Supervisor.
Using a designated company-mandated reporting tool, the Foreman will complete an end-of-day and/or end-of-project walk-through to ensure the quality of workmanship and address any punch list items before leaving the job site.
These items will include updates on work performed, materials consumed (T&M projects), and supplies purchased.
Ensure all WTI Field Resources Reps (Field Reps) have a professional appearance and customer interaction while completing services for a customer.
Responsible for ordering, tracking, and monitoring inventory and ensuring quarterly cycle counts are completed and submitted timely.
Provide pricing for self-performing projects over $12,500.
Submit all proposals of over $20,000 to the Supervisor for review and approval before submitting them to the GS Administrator for logging and distribution to the Sales Rep.
Monitor and manage the Field Reps.
Consult with the Supervisor to take appropriate steps or corrective measures to resolve employee work-related issues and necessary documentation.
Work with the Supervisor to elevate the issues to HR as required.
Coordinate with the Supervisor to create project schedules.
Review time reports daily and make necessary corrections with the admin team.
Attending all appropriate calls, meetings, and trainings.
Perform any other duties and/or projects as required or assigned by the Supervisor or Regional Business Manager.
OTHER SKILLS AND ABILITIES:
Ability to travel out of town, including overnight stays.
Must have reliable transportation and a valid driver's license. Ability to work weekends and/or holidays when needed. Ability to pass a pre-employment drug test.
Ability to read, write, and speak English.
30-hour OSHA certification Registered Roof Observer (RRO) preferred but not required. Minimum of five years of experience in the roofing industry.
Must be thoroughly familiar with built-up, EPDM, PVC, and other forms of low-slope roofing systems, as well as metal and other steep-sloop roofing systems, and how to repair them properly.
The salary range for applicants in this position generally ranges between $53,000 and $65,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Albuquerque, New Mexico
Posted: 2025-06-27 15:09:55
-
I have an exciting opportunity to join a leading UK manufacturer of intelligent power amplifiers based in Herefordshire.
We are seeking a skilled Lead Electronic Assembler to take a hands-on leadership role in assembling high-performance systems and sub-assemblies in a fast-paced, high-quality manufacturing setting.
Key Responsibilities of the Lead Electronic Assembler job based in Herefordshire:
Lead and support a small team of electronic assemblers in the production of sub-systems, power amplifiers, and full systems
Assemble complex builds to exacting standards using detailed build documents and engineering drawings
Ensure all work meets our ‘Zero Defects, Remember Why' quality ethos
Maintain and promote productivity targets while ensuring assembly accuracy and consistency
Train and mentor junior team members in best practices and quality standards
Accurately record and review completed work both digitally and in hard copy
Skills required from the Lead Electronic Assembler job based in Herefordshire:
Extensive experience in electro-mechanical manufacturing with a leadership or supervisory background
Proven soldering skills to IPC 610 standards (certification preferred)
Strong knowledge of PCB assembly, rework, and ideally IPC 620 standards
Excellent attention to detail and strong computer literacy
British Passport holder (required)
If this Lead Electronic Assembler job based in Herefordshire could be of interest, please send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878816 / 07471181784. ....Read more...
Type: Permanent Location: Herefordshire, England
Start: ASAP
Salary / Rate: £25000 - £35000 per annum
Posted: 2025-06-27 14:06:24
-
We are currently seeking an experienced Electrical Maintenance Team Leader to join a market-leading PLC listed manufacturer based in the Calverton area of Nottingham. This Electrical Maintenance Team Leader vacancy offers a salary of up to £58,200, company pension matched to 10%, generous holiday allowance, annual production bonus and overtime opportunities, plus extensive accredited OEM training and personal development opportunities. The business truly values its employees which is reflected in the generous package and site facilities.
This is an exciting time to join the business with the multi-million Capex due to complete soon, which bring industry-leading production and operational facilities. What's in it for you as an Electrical Maintenance Team Leader:
Basic salary circa £58.2k and up to £65K OTE per annum, plus bonus, plus premium overtime.
In addition, you have a matched pension of up to 10%, share options, overtime at a premium, as well as an extensive benefits program such as a cycle to work scheme, shopping discounts etc
Hours of work - Days and Nights, 6am to 6pm, 6pm to 6am, 4 on, 4 off shift pattern
OEM Training and career development, including health and safety training, management training (ILM) & IOSH, cross-skilling and upskilling
Job security and personal development within a market-leading, international manufacturing organisation
The ability to work within a skilled team of engineers permanently.
Experience and Qualifications Required for Electrical Maintenance Team Leader:
Engineering qualified; City & Guilds, ONC, BTEC Level 3, NVQ Level 3, Apprenticeship or equivalent in Electrical
Proven experience in electrical maintenance within a manufacturing setting
Strong Health and Safety awareness
Previous experience as a Team Leader, Maintenance Supervisor, Engineering Manager, Maintenance Manager, etc
People Management, motivation and structured development of the team through performance reviews
Previous experience of the development and application of PPM activities.
The company is a market leader, and international manufacturer, with an impressive background of investing in and developing employees at all levels of their business, providing extensive training and career progression opportunities. If interested, please apply now... ....Read more...
Type: Permanent Location: Nottinghamshire, England
Start: ASAP
Salary / Rate: Up to £58200.00 per annum + Excellent Benefits
Posted: 2025-06-27 12:24:18
-
JOB DESCRIPTION
BUILD YOUR FUTURE WHILE YOU HELP BUILD A BETTER WORLD!
Tremco Construction Products Group brings together Roofing & Building Maintenance, Commercial Sealants, Waterproofing divisions, Tremco Barrier Solutions Inc., Dryvit, Nudura and Willseal brands, Prebuck LLC, Weatherproofing Technologies, Inc., Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
If you're looking for a place to build a career and a life, with great benefits, advancement opportunity, technology, people and a commitment to a sustainable future, you've found it with us.
GC Administration Supervisor
Note: This position will support the South Atlantic and Gulf Coast Regions within our Eastern Division.
GENERAL PURPOSE OF THE JOB:
Responsible for supervising and coordinating all General Contracting project administration staff in addition to project administration duties.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Supervises Project Administrators
Responsibilities of Project Administration
Possess a thorough understanding of all interfacing departments such as Field, Credit, Accounting, Finance, etc.
Process commission adjustments and chargebacks
Assist Business Operations Support Manager in open credit disputes with the finance team
Questions regarding billings, disputes, bonds, insurance, customer submittals, material issues, material releases, customer specific documents that are unfamiliar, commissions
Communicate changes in administrator roles to appropriate internal and external personnel (i.e.
sales reps, CM's, division managers, regional managers etc.)
Readsoft, Invoice Cancelation, and PO Review/Release approval
Responsible for interviewing, hiring, training, performance appraising, reward and discipline of employees
Coordinate work with key Project/Construction Managers, Tech Supervisors, Customers, Management, Sales Reps and Resource Management
Conflict resolution with Sales Reps, CM's, Division Managers and Internal personnel from other internal areas
Assist Business Operations Support Manager with audits
Assist Business Operations Support Manager with month end reporting
Monitor, review and resolve Daily, weekly and monthly reporting
Review and approve timesheets and vacation schedules
Perform reviews and PEPs for direct reports
Special projects as needed
EDUCATION:
Associates degree or equivalent from two-year college or technical school
EXPERIENCE:
Two to four years related experience and/or training
OTHER SKILLS AND ABILITIES:
General Contracting/Construction background preferred
Federal Contracting including Government, State and Local
Ability to look for ways to achieve greater efficiency in process and procedure
Must demonstrate independent thinking and decision making skills
Must be customer focused with strong written and verbal communication
Strong interpersonal skills with the ability to make group presentations
Intermediate understanding of basic accounting principles
Knowledge of Sarbanes-Oxley (compliance regulations for publicly traded companies)
Knowledge of State Prevailing Wage
Knowledge of David Bacon and SCA wagesThe salary range for applicants in this position generally ranges between $58,000 and $73,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Benefits:
Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Commission, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2025-06-26 15:11:47
