-
JOB DESCRIPTION
General Purpose:
To provide safety leadership to all Tremco CPG field employees (including but not limited to Regional Techs, Field Resource Representatives, and leadership), ensure site compliance with corporate and client safety standards, implement safety directives, improve safety performance, and ensure site safety policies and procedures are aligned with governmental regulations.
Responsibilities and Duties:
Conduct both virtual and physical visits to perform site safety audits and safety process audits (e.g., safety document evaluation/compliance)
*This should take place at least 75-80% of the week.
*
Enforce all Federal, State, local, owner, and Tremco regulations throughout all regional projects.
Assist site leadership in developing site-specific safety programs aligned with Tremco Safety policies and instruct supervisors on safety procedures, planning, and equipment.
Assist the Director of Health and Safety with rolling out new safety initiatives and briefing employees as needed on new or updated policies (e.g., Daily Task Planning, 100% audit compliance, safety training programs).
Educate the workforce and regional leadership on understanding Tremco's safety cultural advancements, such as safety leadership and safety management systems.
Effectively represent our Tremco safety culture with our subcontractors and help Tremco site leadership to ensure complete compliance with our subcontractors with applicable rules and regulations (Federal, State, local, owner, Tremco, and their own).
Act as a subject matter resource for workers within the field in producing a documented assessment of safe working processes, risk potentials, and solutions/corrective measures.
Motivating, organizing, and encouraging teamwork within the workforce to ensure safety practices and policies are being adhered to effectively.
Review the safety obligations of the clients and ensure they are carried out as per the terms of the agreement, and communicate to the Field Leadership and Safety Supervisors.
Assist the Director of Health and Safety with EHS Notification and Incident Investigation processes, as well as implementation of response action items.
Ensure that all incidents are reported immediately per the Tremco Incident Notification Policy.
Participate and assist all field leadership in the investigation of incidents to determine the root cause, and take corrective actions where necessary.
Ensure incident corrective actions are followed up on and completed.
Ensure injured workers are offered modified duties, and documentation has been completed.
Monitor and follow up on modified workers in the field.
As a direct report to, regularly communicate safety audit results and/or field safety concerns (e.g., Stop Work Authority) with the Director of Health and Safety and prepare observation reports as needed.
At minimum must have 30 Hr.
OSHA Training.
(With willingness to get 500 Hr.
OSHA Training to operate asan official component of the OSHA Construction Outreach Program.)
Ensure all new employees within the Region meet their training objectives, e.g., complete their Day 1 Orientation, iLead New Employee Training, and Tremco (OSHA) Construction 10 Hr.
Training within 1 month of their employment.
Qualifications:
An Occupational Health and Safety Degree, Diploma, or Nationally Recognized Safety Certification or Designation is a mandatory requirement.
Minimum 8 years of Health and Safety field experience that includes strong skills in incident investigation
Minimum 5 years of supervisory experience
Proficient in Microsoft Office applications
The ability to demonstrate the application of risk assessment to company operations and activities.
Experience in the building maintenance and/or general construction safety industries strongly preferred.
Work remotely with the ability to travel 75% or greater
Skills /Knowledge/Competencies:
Must have excellent skills and/or abilities in the following areas:
Leadership, conflict resolution, and problem-solving
Verbal and written communications
Interpersonal skills with all levels of staff
Ability to perform under stressful conditions, with the ability to diffuse situations
Situation analysis
Decision-making
Attention to detail and high level of accuracy
Organized approach to work, including excellent follow-up on issues
Multitasking in a fast-paced environment with good prioritization skills
Professional Safety Certifications are a plus The salary range for applicants in this position generally ranges between $82,000 and $102,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Raleigh, North Carolina
Posted: 2026-03-07 14:43:48
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for Fill Off Attendants.
GENERAL SUMMARY
Fill completed batches into appropriate containers or onto tanker for shipping purposes, following appropriate procedures for different fill-off methods as indicated on batch ticket.
Seal and apply appropriate labeling to containers as indicated on batch tickets.
Move finished goods to finished goods warehouse for shipping.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate appropriate vat to be filled off per batch ticket instructions Pre-mix material in vat before filling Locate appropriate materials (containers, strainers, equipment, etc.) used for filling, as indicated by batch ticket, and in fill-off manuals Always bond and ground containers before filling Obtain retain per instructions in fill-off procedures.
Labels retain as directed by QC department Complete fill-off procedure Clean vat and equipment using appropriate cleaning solution indicated on batch ticket Make proper notations on batch ticket regarding fill-off Apply appropriate labeling as instructed on batch ticket Move finished goods to warehouse if necessary Maintain neat and orderly work area
Pay: From $16.00 per hour Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Flexible spending account Health insurance Life insurance Paid time off Retirement plan Tuition reimbursement Vision insurance Schedule: 8 hour shift Monday to Friday Weekend availability Supplemental Pay: Signing bonus Ability to commute/relocate: Hudson, NC: Reliably commute or planning to relocate before starting work (Required) Experience: Basic reading and comprehension skills Basic math skills
Shift availability: Day Shift (Preferred) Work Location: In person All candidates must pass background check and drug test to qualify for employment.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-03-06 22:09:05
-
JOB DESCRIPTION
GENERAL SUMMARY: Perform a variety of general repairs, installations, and maintenance on facility equipment, building and utility systems.
Perform general carpentry, floor repairs and general repairs of facility.
Maintain record of maintenance and repairs.
Make routine checks and inspections of equipment for proper lubrication and other general maintenance functions.
Check out problem areas and make repairs and adjustments as needed.
Refer complex situations to supervisor.
Operate machines, tools, perform welding and other maintenance tasks as required.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned. Maintain, adjust, and repair machinery and equipment throughout facility Perform general carpentry work and repairs to building and grounds Perform inspections of equipment and machines and make necessary repairs as directed Maintain log of maintenance performed on machinery and equipment Respond to maintenance request items as assigned by supervisor Operate tools and equipment in a safe and efficient manner Maintain clean and safe work environment using correct tools properly
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
High school diploma or equivalent Minimum 4 years experience in maintenance field Basic math skills Basic reading and comprehension skills
Specific Knowledge, Skills, and Abilities Required
Knowledge of plumbing, carpentry, painting, machine servicing, electrical skills and pneumatics Work in cross-functional environment, with frequent interruptions to daily schedule
Reasoning Ability:
Determine correctness of a variety of processes in relation to specified guidelines learned through prior experience in field Relies on experience and judgment to accomplish goals Work without continuous supervision while completing assigned projects
CERTIFICATES, LICENSES, REGISTRATIONS: None required
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform essential functions. While performing the essential functions of this job the employee is regularly required to stand, reach, handle, twist and/or turn, talk, see and hear and lift and/or move up to 50 pounds.
The employee is frequently required to bend, squat, and stoop.
The employee occasionally is required to sit, walk, lift, carry, push, pull, climb and kneel, write and drive.
WORK ENVIRONMENT:
The work environment is representative of those an employee would encounter in a normal paint manufacturing environment.
The noise level is usually moderate.
KEY PERFORMANCE INDICATORS (KPI):
Performance of assigned tasks Adherence to Preventive Maintenance Program and hours of down time in plant Knowledge of assigned area of responsibility Timeliness and accuracy of project completion Attendance Attitude Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-03-06 14:09:14
-
JOB DESCRIPTION
As a Regional Sales Director, you will guide our regional strategy and ensure we meet our goals.
Your primary responsibilities will include:
Sales and Profitability
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="1">Lead the region to achieve sales and profit targets.
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="2">Oversee all field sales and service activities, including account management and new business development.
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="3">Ensure customer issues are resolved effectively.
Team Leadership
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="1">Manage and develop Regional Sales Managers and Technical Sales and Service Representatives.
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="2">Conduct performance reviews and set clear annual objectives for your team.
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="3">Drive the execution of company-wide goals and policies.
Marketing and Reporting
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="1">Contribute to key sales and marketing programs, including creating and delivering presentations.
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="2">Provide regular updates to senior leadership on sales activities, team performance, and market competition.
Industry Engagement
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="1">Represent FinishWorks professionally at trade shows and industry events.
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="2">Network with key organizations like the KCMA.
What You Will Bring
We are looking for a candidate with a proven track record of sales leadership and a passion for developing people.
Qualifications & Experience
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="1">Bachelor's Degree in Business Administration or equivalent experience.
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="2">A minimum of 10 years of sales experience, preferably in a related industry.
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="3">Professional training in sales or sales management.
Skills & Abilities
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="1">Strong leadership and motivational skills.
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="2">Excellent organizational and people skills.
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="3">Strong analytical and decision-making abilities.
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="4">Proficient in verbal and written communication.
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="5">Comfortable using computer applications, including word processing and spreadsheets.
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="6">A self-motivated and proactive approach to achieving results.
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="7">Creative problem-solving capabilities.Apply for this ad Online! ....Read more...
Type: Permanent Location: Mocksville, North Carolina
Posted: 2026-03-06 14:09:12
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for Fill Off Attendants.
GENERAL SUMMARY
Fill completed batches into appropriate containers or onto tanker for shipping purposes, following appropriate procedures for different fill-off methods as indicated on batch ticket.
Seal and apply appropriate labeling to containers as indicated on batch tickets.
Move finished goods to finished goods warehouse for shipping.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate appropriate vat to be filled off per batch ticket instructions Pre-mix material in vat before filling Locate appropriate materials (containers, strainers, equipment, etc.) used for filling, as indicated by batch ticket, and in fill-off manuals Always bond and ground containers before filling Obtain retain per instructions in fill-off procedures.
Labels retain as directed by QC department Complete fill-off procedure Clean vat and equipment using appropriate cleaning solution indicated on batch ticket Make proper notations on batch ticket regarding fill-off Apply appropriate labeling as instructed on batch ticket Move finished goods to warehouse if necessary Maintain neat and orderly work area
Pay: From $16.00 per hour Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Flexible spending account Health insurance Life insurance Paid time off Retirement plan Tuition reimbursement Vision insurance Schedule: 8 hour shift Monday to Friday Weekend availability Supplemental Pay: Signing bonus Ability to commute/relocate: Hudson, NC: Reliably commute or planning to relocate before starting work (Required) Experience: Basic reading and comprehension skills Basic math skills
Shift availability: Day Shift (Preferred) Work Location: In person All candidates must pass background check and drug test to qualify for employment.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-03-06 14:09:10
-
JOB DESCRIPTION
GENERAL SUMMARY Drive tractor-trailer unit to make deliveries and pick-ups of finished products, empty drums, etc.
Perform truck safety inspection prior to each trip checking motor, brakes, lights, and tires for proper operation conditions.
Check and assist in loading and/or unloading trailers.
Obtain proper authorizations for all deliveries and pick-ups.
Maintain accurate DOT driver log of required information.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned. Assist with loading trailer according to bills of lading.
Trailer should be loaded in order that best accommodates stops Check truck according to "Driver's Daily Check List" making necessary adjustments and corrections before leaving. Deliver material to customer's location Assist in unloading at customer site if required and have customer sign proper acknowledgement of delivery Pick up empty drums as instructed Unload empty drums upon return to plant Complete DOT driver log sheets Return completed shipping paperwork to shipping office Notify supervisor of and schedule truck repair and maintenance as necessary
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
High school diploma preferred At least 5 years prior experience driving tractor-trailer/tanker unit Hazardous material endorsement
Specific Knowledge, Skills, and Abilities Required
Basic math/measurement skills Basic reading and comprehension skills Current CDL license with proper endorsements (ie., tanker-hazmat certification) Proper current DOT certification (current medical card, identification card, etc.) Acceptable driving record for past seven years as required by DOT Forklift operation experience preferred
Reasoning Ability
Determine correct processes regarding standard DOT and company truck driving requirements with regard to material transportation and vehicle operating procedures as instructed in initial and ongoing training Work without continuous supervision while completing assigned tasks
CERTIFICATES, LICENSES, REGISTRATIONS
Must successfully complete RPM Wood Finishes Group forklift operation training and receive forklift operation license
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential function of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the essential functions of this job the employee is regularly required to walk, sit for extended periods of time, stand, bend, and/or stoop, grasp, handle or feel, talk and/or hear.
The employee must regularly lift and/or move up to 100 pounds, using appropriate equipment.
WORK ENVIRONMENT
The work environment is diverse in that drivers are in different locations throughout the facility within a given shift as well as in customer's facilities while performing the job tasks listed in this description.
KEY PERFORMANCE INDICATORS (KPI)
Timely delivery of materials Successful interaction with customers at delivery points Safe driving record Maintenance of assigned equipment Attendance and attitude Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-03-06 14:09:10
-
JOB DESCRIPTION
As a Regional Sales Director, you will guide our regional strategy and ensure we meet our goals.
Your primary responsibilities will include:
Sales and Profitability
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="1">Lead the region to achieve sales and profit targets.
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="2">Oversee all field sales and service activities, including account management and new business development.
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="3">Ensure customer issues are resolved effectively.
Team Leadership
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="1">Manage and develop Regional Sales Managers and Technical Sales and Service Representatives.
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="2">Conduct performance reviews and set clear annual objectives for your team.
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="3">Drive the execution of company-wide goals and policies.
Marketing and Reporting
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="1">Contribute to key sales and marketing programs, including creating and delivering presentations.
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="2">Provide regular updates to senior leadership on sales activities, team performance, and market competition.
Industry Engagement
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="1">Represent FinishWorks professionally at trade shows and industry events.
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="2">Network with key organizations like the KCMA.
What You Will Bring
We are looking for a candidate with a proven track record of sales leadership and a passion for developing people.
Qualifications & Experience
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="1">Bachelor's Degree in Business Administration or equivalent experience.
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="2">A minimum of 10 years of sales experience, preferably in a related industry.
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="3">Professional training in sales or sales management.
Skills & Abilities
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="1">Strong leadership and motivational skills.
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="2">Excellent organizational and people skills.
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="3">Strong analytical and decision-making abilities.
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="4">Proficient in verbal and written communication.
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="5">Comfortable using computer applications, including word processing and spreadsheets.
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="6">A self-motivated and proactive approach to achieving results.
ol]:!pb-0 [&>ol]:!pt-0 [&>ul]:!pb-0 [&>ul]:!pt-0" value="7">Creative problem-solving capabilities.Apply for this ad Online! ....Read more...
Type: Permanent Location: Mocksville, North Carolina
Posted: 2026-03-06 14:09:07
-
JOB DESCRIPTION
General Purpose:
To provide safety leadership to all Tremco CPG field employees (including but not limited to Regional Techs, Field Resource Representatives, and leadership), ensure site compliance with corporate and client safety standards, implement safety directives, improve safety performance, and ensure site safety policies and procedures are aligned with governmental regulations.
Responsibilities and Duties:
Conduct both virtual and physical visits to perform site safety audits and safety process audits (e.g., safety document evaluation/compliance)
*This should take place at least 75-80% of the week.
*
Enforce all Federal, State, local, owner, and Tremco regulations throughout all regional projects.
Assist site leadership in developing site-specific safety programs aligned with Tremco Safety policies and instruct supervisors on safety procedures, planning, and equipment.
Assist the Director of Health and Safety with rolling out new safety initiatives and briefing employees as needed on new or updated policies (e.g., Daily Task Planning, 100% audit compliance, safety training programs).
Educate the workforce and regional leadership on understanding Tremco's safety cultural advancements, such as safety leadership and safety management systems.
Effectively represent our Tremco safety culture with our subcontractors and help Tremco site leadership to ensure complete compliance with our subcontractors with applicable rules and regulations (Federal, State, local, owner, Tremco, and their own).
Act as a subject matter resource for workers within the field in producing a documented assessment of safe working processes, risk potentials, and solutions/corrective measures.
Motivating, organizing, and encouraging teamwork within the workforce to ensure safety practices and policies are being adhered to effectively.
Review the safety obligations of the clients and ensure they are carried out as per the terms of the agreement, and communicate to the Field Leadership and Safety Supervisors.
Assist the Director of Health and Safety with EHS Notification and Incident Investigation processes, as well as implementation of response action items.
Ensure that all incidents are reported immediately per the Tremco Incident Notification Policy.
Participate and assist all field leadership in the investigation of incidents to determine the root cause, and take corrective actions where necessary.
Ensure incident corrective actions are followed up on and completed.
Ensure injured workers are offered modified duties, and documentation has been completed.
Monitor and follow up on modified workers in the field.
As a direct report to, regularly communicate safety audit results and/or field safety concerns (e.g., Stop Work Authority) with the Director of Health and Safety and prepare observation reports as needed.
At minimum must have 30 Hr.
OSHA Training.
(With willingness to get 500 Hr.
OSHA Training to operate asan official component of the OSHA Construction Outreach Program.)
Ensure all new employees within the Region meet their training objectives, e.g., complete their Day 1 Orientation, iLead New Employee Training, and Tremco (OSHA) Construction 10 Hr.
Training within 1 month of their employment.
Qualifications:
An Occupational Health and Safety Degree, Diploma, or Nationally Recognized Safety Certification or Designation is a mandatory requirement.
Minimum 8 years of Health and Safety field experience that includes strong skills in incident investigation
Minimum 5 years of supervisory experience
Proficient in Microsoft Office applications
The ability to demonstrate the application of risk assessment to company operations and activities.
Experience in the building maintenance and/or general construction safety industries strongly preferred.
Work remotely with the ability to travel 75% or greater
Skills /Knowledge/Competencies:
Must have excellent skills and/or abilities in the following areas:
Leadership, conflict resolution, and problem-solving
Verbal and written communications
Interpersonal skills with all levels of staff
Ability to perform under stressful conditions, with the ability to diffuse situations
Situation analysis
Decision-making
Attention to detail and high level of accuracy
Organized approach to work, including excellent follow-up on issues
Multitasking in a fast-paced environment with good prioritization skills
Professional Safety Certifications are a plus The salary range for applicants in this position generally ranges between $82,000 and $102,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Raleigh, North Carolina
Posted: 2026-03-06 14:08:37
-
JOB DESCRIPTION
GENERAL SUMMARY Drive tractor-trailer unit to make deliveries and pick-ups of finished products, empty drums, etc.
Perform truck safety inspection prior to each trip checking motor, brakes, lights, and tires for proper operation conditions.
Check and assist in loading and/or unloading trailers.
Obtain proper authorizations for all deliveries and pick-ups.
Maintain accurate DOT driver log of required information.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned. Assist with loading trailer according to bills of lading.
Trailer should be loaded in order that best accommodates stops Check truck according to "Driver's Daily Check List" making necessary adjustments and corrections before leaving. Deliver material to customer's location Assist in unloading at customer site if required and have customer sign proper acknowledgement of delivery Pick up empty drums as instructed Unload empty drums upon return to plant Complete DOT driver log sheets Return completed shipping paperwork to shipping office Notify supervisor of and schedule truck repair and maintenance as necessary
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
High school diploma preferred At least 5 years prior experience driving tractor-trailer/tanker unit Hazardous material endorsement
Specific Knowledge, Skills, and Abilities Required
Basic math/measurement skills Basic reading and comprehension skills Current CDL license with proper endorsements (ie., tanker-hazmat certification) Proper current DOT certification (current medical card, identification card, etc.) Acceptable driving record for past seven years as required by DOT Forklift operation experience preferred
Reasoning Ability
Determine correct processes regarding standard DOT and company truck driving requirements with regard to material transportation and vehicle operating procedures as instructed in initial and ongoing training Work without continuous supervision while completing assigned tasks
CERTIFICATES, LICENSES, REGISTRATIONS
Must successfully complete RPM Wood Finishes Group forklift operation training and receive forklift operation license
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential function of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the essential functions of this job the employee is regularly required to walk, sit for extended periods of time, stand, bend, and/or stoop, grasp, handle or feel, talk and/or hear.
The employee must regularly lift and/or move up to 100 pounds, using appropriate equipment.
WORK ENVIRONMENT
The work environment is diverse in that drivers are in different locations throughout the facility within a given shift as well as in customer's facilities while performing the job tasks listed in this description.
KEY PERFORMANCE INDICATORS (KPI)
Timely delivery of materials Successful interaction with customers at delivery points Safe driving record Maintenance of assigned equipment Attendance and attitude Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-03-06 14:08:23
-
JOB DESCRIPTION
GENERAL SUMMARY: Perform a variety of general repairs, installations, and maintenance on facility equipment, building and utility systems.
Perform general carpentry, floor repairs and general repairs of facility.
Maintain record of maintenance and repairs.
Make routine checks and inspections of equipment for proper lubrication and other general maintenance functions.
Check out problem areas and make repairs and adjustments as needed.
Refer complex situations to supervisor.
Operate machines, tools, perform welding and other maintenance tasks as required.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned. Maintain, adjust, and repair machinery and equipment throughout facility Perform general carpentry work and repairs to building and grounds Perform inspections of equipment and machines and make necessary repairs as directed Maintain log of maintenance performed on machinery and equipment Respond to maintenance request items as assigned by supervisor Operate tools and equipment in a safe and efficient manner Maintain clean and safe work environment using correct tools properly
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
High school diploma or equivalent Minimum 4 years experience in maintenance field Basic math skills Basic reading and comprehension skills
Specific Knowledge, Skills, and Abilities Required
Knowledge of plumbing, carpentry, painting, machine servicing, electrical skills and pneumatics Work in cross-functional environment, with frequent interruptions to daily schedule
Reasoning Ability:
Determine correctness of a variety of processes in relation to specified guidelines learned through prior experience in field Relies on experience and judgment to accomplish goals Work without continuous supervision while completing assigned projects
CERTIFICATES, LICENSES, REGISTRATIONS: None required
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform essential functions. While performing the essential functions of this job the employee is regularly required to stand, reach, handle, twist and/or turn, talk, see and hear and lift and/or move up to 50 pounds.
The employee is frequently required to bend, squat, and stoop.
The employee occasionally is required to sit, walk, lift, carry, push, pull, climb and kneel, write and drive.
WORK ENVIRONMENT:
The work environment is representative of those an employee would encounter in a normal paint manufacturing environment.
The noise level is usually moderate.
KEY PERFORMANCE INDICATORS (KPI):
Performance of assigned tasks Adherence to Preventive Maintenance Program and hours of down time in plant Knowledge of assigned area of responsibility Timeliness and accuracy of project completion Attendance Attitude Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-03-06 14:08:02
-
JOB DESCRIPTION
General Purpose:
To provide safety leadership to all Tremco CPG field employees (including but not limited to Regional Techs, Field Resource Representatives, and leadership), ensure site compliance with corporate and client safety standards, implement safety directives, improve safety performance, and ensure site safety policies and procedures are aligned with governmental regulations.
Responsibilities and Duties:
Conduct both virtual and physical visits to perform site safety audits and safety process audits (e.g., safety document evaluation/compliance)
*This should take place at least 75-80% of the week.
*
Enforce all Federal, State, local, owner, and Tremco regulations throughout all regional projects.
Assist site leadership in developing site-specific safety programs aligned with Tremco Safety policies and instruct supervisors on safety procedures, planning, and equipment.
Assist the Director of Health and Safety with rolling out new safety initiatives and briefing employees as needed on new or updated policies (e.g., Daily Task Planning, 100% audit compliance, safety training programs).
Educate the workforce and regional leadership on understanding Tremco's safety cultural advancements, such as safety leadership and safety management systems.
Effectively represent our Tremco safety culture with our subcontractors and help Tremco site leadership to ensure complete compliance with our subcontractors with applicable rules and regulations (Federal, State, local, owner, Tremco, and their own).
Act as a subject matter resource for workers within the field in producing a documented assessment of safe working processes, risk potentials, and solutions/corrective measures.
Motivating, organizing, and encouraging teamwork within the workforce to ensure safety practices and policies are being adhered to effectively.
Review the safety obligations of the clients and ensure they are carried out as per the terms of the agreement, and communicate to the Field Leadership and Safety Supervisors.
Assist the Director of Health and Safety with EHS Notification and Incident Investigation processes, as well as implementation of response action items.
Ensure that all incidents are reported immediately per the Tremco Incident Notification Policy.
Participate and assist all field leadership in the investigation of incidents to determine the root cause, and take corrective actions where necessary.
Ensure incident corrective actions are followed up on and completed.
Ensure injured workers are offered modified duties, and documentation has been completed.
Monitor and follow up on modified workers in the field.
As a direct report to, regularly communicate safety audit results and/or field safety concerns (e.g., Stop Work Authority) with the Director of Health and Safety and prepare observation reports as needed.
At minimum must have 30 Hr.
OSHA Training.
(With willingness to get 500 Hr.
OSHA Training to operate asan official component of the OSHA Construction Outreach Program.)
Ensure all new employees within the Region meet their training objectives, e.g., complete their Day 1 Orientation, iLead New Employee Training, and Tremco (OSHA) Construction 10 Hr.
Training within 1 month of their employment.
Qualifications:
An Occupational Health and Safety Degree, Diploma, or Nationally Recognized Safety Certification or Designation is a mandatory requirement.
Minimum 8 years of Health and Safety field experience that includes strong skills in incident investigation
Minimum 5 years of supervisory experience
Proficient in Microsoft Office applications
The ability to demonstrate the application of risk assessment to company operations and activities.
Experience in the building maintenance and/or general construction safety industries strongly preferred.
Work remotely with the ability to travel 75% or greater
Skills /Knowledge/Competencies:
Must have excellent skills and/or abilities in the following areas:
Leadership, conflict resolution, and problem-solving
Verbal and written communications
Interpersonal skills with all levels of staff
Ability to perform under stressful conditions, with the ability to diffuse situations
Situation analysis
Decision-making
Attention to detail and high level of accuracy
Organized approach to work, including excellent follow-up on issues
Multitasking in a fast-paced environment with good prioritization skills
Professional Safety Certifications are a plus The salary range for applicants in this position generally ranges between $82,000 and $102,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Raleigh, North Carolina
Posted: 2026-03-06 14:07:59
-
Tractor Mechanic / Agricultural Engineer
Location: Northern Ireland Salary: Competitive (depending on experience) Job Type: Full-time, Permanent
We are working with a specialist agricultural engineering workshop that focuses on the repair, rebuild, and restoration of tractors and agricultural machinery.
The business works on everything from modern workhorses to full nut-and-bolt restorations of classic tractors, delivering high-quality mechanical and engineering work for customers across the UK and Ireland.
Due to continued demand, they are now looking to recruit a Tractor Mechanic / Agricultural Engineer to join their growing team.
The Role
You will be responsible for diagnosing, repairing, and rebuilding tractors and agricultural machinery in a well-equipped workshop environment.
Typical duties will include:
Servicing and maintaining tractors and agricultural machinery
Engine strip-downs, rebuilds, and tuning
Gearbox repairs and clutch replacements
Hydraulic and electrical fault finding
Diagnostics and performance troubleshooting
Welding, fabrication, and mechanical restoration work
Supporting full machinery rebuild and restoration projects
The role offers the chance to work on both working farm machinery and specialist restoration projects, making it ideal for someone who enjoys hands-on engineering.
Requirements
Experience as a Tractor Mechanic, Agricultural Engineer, Plant Mechanic, or similar
Strong knowledge of diesel engines, hydraulics, gearboxes, and mechanical systems
Ability to diagnose faults and carry out mechanical repairs independently
Experience with agricultural machinery or heavy plant equipment
Welding or fabrication experience would be an advantage
Strong attention to detail and pride in quality workmanship
What's On Offer
Competitive salary depending on experience
Work on a wide variety of machinery and restoration projects
Supportive, skilled engineering team
Opportunity to develop specialist restoration skills
Apply
If you are an experienced Tractor Mechanic or Agricultural Engineer looking for a new challenge, we would like to hear from you.
Apply today or contact us for a confidential discussion. ....Read more...
Type: Permanent Location: Londonderry, Northern Ireland
Start: ASAP
Salary / Rate: £11000 - £40000 per annum
Posted: 2026-03-06 09:48:10
-
JOB DESCRIPTION
Our unique summer program has been specially designed to provide a strong foundation for your career.
Depending on your focus, you will be partnered with a senior mentor and work alongside industry experts while also learning construction project management technology.
You will gain real experience on jobsites that could include arenas and stadiums, hospitals, historical landmarks, commercial properties, and some of the best schools in our country.
During your time in our program, you will also become certified in OSHA's 10-hour safety course at no cost to you.
Interested? Apply today! We are seeking students in their junior or senior year in Construction Management, Architecture, Engineering, Business, or students interested in a career in construction and committed to building both a better world and a better future. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Greensboro, North Carolina
Posted: 2026-03-06 06:10:17
-
JOB DESCRIPTION
Our unique summer program has been specially designed to provide a strong foundation for your career.
Depending on your focus, you will be partnered with a senior mentor and work alongside industry experts while also learning construction project management technology.
You will gain real experience on jobsites that could include arenas and stadiums, hospitals, historical landmarks, commercial properties, and some of the best schools in our country.
During your time in our program, you will also become certified in OSHA's 10-hour safety course at no cost to you.
Interested? Apply today! We are seeking students in their junior or senior year in Construction Management, Architecture, Engineering, Business, or students interested in a career in construction and committed to building both a better world and a better future. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Raleigh, North Carolina
Posted: 2026-03-06 06:10:11
-
JOB DESCRIPTION
Our unique summer program has been specially designed to provide a strong foundation for your career.
Depending on your focus, you will be partnered with a senior mentor and work alongside industry experts while also learning construction project management technology.
You will gain real experience on jobsites that could include arenas and stadiums, hospitals, historical landmarks, commercial properties, and some of the best schools in our country.
During your time in our program, you will also become certified in OSHA's 10-hour safety course at no cost to you.
Interested? Apply today! We are seeking students in their junior or senior year in Construction Management, Architecture, Engineering, Business, or students interested in a career in construction and committed to building both a better world and a better future. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Greensboro, North Carolina
Posted: 2026-03-05 22:17:27
-
JOB DESCRIPTION
Our unique summer program has been specially designed to provide a strong foundation for your career.
Depending on your focus, you will be partnered with a senior mentor and work alongside industry experts while also learning construction project management technology.
You will gain real experience on jobsites that could include arenas and stadiums, hospitals, historical landmarks, commercial properties, and some of the best schools in our country.
During your time in our program, you will also become certified in OSHA's 10-hour safety course at no cost to you.
Interested? Apply today! We are seeking students in their junior or senior year in Construction Management, Architecture, Engineering, Business, or students interested in a career in construction and committed to building both a better world and a better future. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Raleigh, North Carolina
Posted: 2026-03-05 22:09:18
-
An amazing new job opportunity has arisen for a Care Quality Manager to cover care home services across Belfast.
You will be working for one of UK's leading healthcare provider
This exceptional care home provider is dedicated to creating a safe, clean, relaxed, and homely environment while delivering high-quality, person-centred care to every resident
*
*To be considered for this position you must be qualified as a Registered Nurse with an active NMC Pin + Nursing/Clinical Experience within a care home is essential
*
*
As the Care Quality Manager your key responsibilities will include:
Support Home Managers and staff to ensure they provide high quality care
Ensure homes are compliant with RQIA and prepared for any upcoming inspections
Conduct weekly reports sent to the Operations Director regarding service quality
Conduct weekly audits, create and implement development points to further improve the home
Developing positive relationships with commissioners and external professionals and the delivery of clinical quality training across the Area
Monitor results and improvements
The following skills and experience would be preferred and beneficial for the role:
Experience working as a Quality Manager
Exposure to RQIA inspections
Passion for the care of elderly people
Care Home background
The ability to work over a 7 day period to include weekend visits
Experience of care planning
Experience of management within a care home
The successful Care Quality Manager will receive an excellent salary of £53,500 per annum.
This exciting position is a permanent full time role working through days.
In return for your hard work and commitment you will receive the following generous benefits:
*
*Car Allowance
*
*
Annual Leave/Paid time off
Retirement plan and/or pension
Flexible schedule
Employee development programs
Free parking
Work With Charities
Social Opportunities
Employee Recognition Scheme
Reference ID: 7228
To apply for this fantastic job role, please call on 0121 638 0567 or send your CV ....Read more...
Type: Permanent Location: Whiteabbey, Northern Ireland
Start: ASAP
Duration: Permanent
Salary / Rate: Up to £53500 per annum + Car Allowance
Posted: 2026-03-05 17:49:15
-
An amazing new job opportunity has arisen for a Care Quality Manager to cover care home services across Belfast.
You will be working for one of UK's leading healthcare provider
This exceptional care home provider is dedicated to creating a safe, clean, relaxed, and homely environment while delivering high-quality, person-centred care to every resident
*
*To be considered for this position you must be qualified as a Registered Nurse with an active NMC Pin + Nursing/Clinical Experience within a care home is essential
*
*
As the Care Quality Manager your key responsibilities will include:
Support Home Managers and staff to ensure they provide high quality care
Ensure homes are compliant with RQIA and prepared for any upcoming inspections
Conduct weekly reports sent to the Operations Director regarding service quality
Conduct weekly audits, create and implement development points to further improve the home
Developing positive relationships with commissioners and external professionals and the delivery of clinical quality training across the Area
Monitor results and improvements
The following skills and experience would be preferred and beneficial for the role:
Experience working as a Quality Manager
Exposure to RQIA inspections
Passion for the care of elderly people
Care Home background
The ability to work over a 7 day period to include weekend visits
Experience of care planning
Experience of management within a care home
The successful Care Quality Manager will receive an excellent salary of £53,500 per annum.
This exciting position is a permanent full time role working through days.
In return for your hard work and commitment you will receive the following generous benefits:
*
*Car Allowance
*
*
Annual Leave/Paid time off
Retirement plan and/or pension
Flexible schedule
Employee development programs
Free parking
Work With Charities
Social Opportunities
Employee Recognition Scheme
Reference ID: 7228
To apply for this fantastic job role, please call on 0121 638 0567 or send your CV ....Read more...
Type: Permanent Location: Whiteabbey, Northern Ireland
Start: ASAP
Duration: Permanent
Salary / Rate: Up to £53500 per annum + Car Allowance
Posted: 2026-03-05 17:49:12
-
We are looking for a Children's Team Manager to join our Initial Directions Team.
Do not apply for this role if you do not have a minimum of 3 years experience post qualified experience in permanent contract/s.
About the team
This team acts as the first point of contact for all safeguarding concerns and requests for support regarding children in the local community.
The team manage the incoming referrals from schools, health professionals and the general public when concerns regarding the children's safety/ welfare arises.
The role of this team is to ensure that the referrals receive the most appropriate level of need required in a timely manner, they play a vital role in the progression of each allegation and case.
As a team manager, the role involves leading and supporting individuals and the team in achieving the organisations goals.
About you
A degree within Social Work (Degree/DipDW/CQSW) with a minimum of three years experiences is essential to be considered for this role.
Essential to have previous experience being managing a team and having direct experience working with children in need and their families as well as having an extensive understanding of safeguarding children processes is key in the role.
Ability to be flexible resilient and reflective is also essential.
A valid UK driving license and vehicle is required to qualify for this role.
What's on offer?
Up to £45.00 per hour umbrella (PAYE payment options also available)
9 - 5 structured hours
Non caseholding role
Non customer facing
Hybrid working scheme
For more information, please get in contact
Liberty Hodder - Candidate Consultant
0118 948 5555 / 07884008267 ....Read more...
Type: Contract Location: North Somerset, England
Salary / Rate: Up to £45.00 per hour
Posted: 2026-03-05 17:29:22
-
We are looking for a Senior Radar Systems Engineer to join a team developing advanced radar systems.
You will model, design, and analyse radar and related systems, support hardware and software development, and develop digital signal processing algorithms.
Key Requirements
Bachelor or Master degree in Engineering, Physics, or Mathematics.
Experience with MATLAB and digital signal processing.
Knowledge of radar or related technologies ( sonar, image processing, communications).
Strong team player with good written and verbal communication.
Willingness to travel in the UK and overseas.
Desirable
Radar concepts Pulse Compression, Doppler, CFAR.
Experience with Phased Array Radar, FPGA, Linux, RF electronics.
Programming in Python, C++ and lab hardware testing experience.
....Read more...
Type: Permanent Location: North London, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £65000 Per Annum None
Posted: 2026-03-05 16:14:15
-
We are seeking a Senior Systems Integration Engineer to join a leading engineering company based in North London.
This role involves working across the design, integration, and testing of complex systems, collaborating with multidisciplinary engineering teams.
Key Responsibilities
Support systems design, integration, and test activities.
Contribute across the full product lifecycle from concept through to delivery.
Work with software, mechanical, and electrical engineering teams.
Produce technical documentation, specifications, and reports.
Support system verification and validation activities.
Requirements
Degree in Engineering, Physics, Mathematics, or equivalent experience.
Experience in systems integration, design, or testing.
Understanding of systems and product lifecycle development.
Strong communication and technical documentation skills.
UK driving licence and eligibility for UK Security Clearance.
Experience with radar, RF, or electronic systems.
Knowledge of communication protocols
Experience with test equipment (oscilloscopes, spectrum analysers, multimeters).
Background in defence, aerospace, or complex engineering environments. ....Read more...
Type: Permanent Location: North London, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £60000 Per Annum None
Posted: 2026-03-05 16:01:08
-
Are you an experienced Mechanical Development Engineer looking for your next challenge? This is an exciting opportunity to join a growing engineering team and play a key role in developing innovative, high-quality mechanical products from concept through to production.
Looking for a motivated and detail-oriented Mechanical Development Engineer to lead the mechanical design and development of sensor-based products.
You will be responsible for delivering cost-effective, manufacturable designs that meet both customer and internal specifications.
This role involves full product lifecycle management — from initial concept and prototyping through to documentation, supplier engagement, and supporting production teams.
Key responsibilities for the Mechanical Development Engineer based in Northants:
Lead mechanical design and product development activities, collaborating closely with electronics engineers.
Produce and test prototypes as required.
Create and manage technical documentation including BOMs, drawings, datasheets, FMEAs, technical files, and compliance documents.
Manage projects to agreed timescales, budgets, and specifications.
Maintain technical ownership of designs throughout the lifecycle, supporting production and customer delivery.
Apply design-for-manufacture and cost-control principles without compromising on quality.
Liaise with external suppliers and identify new supply partners when necessary.
Support the design or sourcing of bespoke tooling for assembly processes.
Produce clear assembly instructions for production teams.
Set up parts within ERP systems.
Ensure compliance with ISO requirements and internal processes.
Key skills required for the Mechanical Development Engineer based in Northants:
Degree in Mechanical Engineering, Mechatronics, or a related field.
Extensive experience in a mechanical design or engineering development environment.
Proven track record of delivering products from concept through to market launch.
Experience in prototyping, testing, and validation.
Proficiency with 3D CAD (SolidWorks preferred).
Knowledge of injection moulding, CNC machining, and sheet metal design.
Strong computer literacy (Microsoft Office/365/Teams, ERP systems).
Excellent communication skills, both written and verbal.
Highly self-motivated with the ability to manage multiple projects independently.
Strong attention to detail with a “right first time” approach.
Ability to work at pace and take initiative when faced with design challenges.
Benefits
27.5 days annual leave + bank holidays
Private medical insurance
Bonus scheme
Pension
Death benefit & income protection
The position is for a senior Mechanical Development Engineer who thrives in a fast-paced environment, is confident working independently, and enjoys taking full ownership of mechanical design projects.
APPLY NOW! To apply for the Mechanical Development Engineer based in Northants, please send your CV to mbelmar@redlinegroup.Com, or for more information contact Mike Belmar on 01582 878807 or 07961 158782. ....Read more...
Type: Permanent Location: Northamptonshire, England
Start: ASAP
Salary / Rate: £40000 - £50000 per annum
Posted: 2026-03-05 15:40:33
-
We are looking for a Software Test Engineer and Embedded Systems QA Specialist to support the build, testing, and validation of software for technical and embedded products.
You will work closely with software and hardware engineers to ensure reliable, high-quality systems.
Key Responsibilities
Execute and maintain software test plans, specifications, and reports
Perform functional, regression, and integration testing
Conduct hardware???software integration testing on embedded systems
Support software builds and test automation
Collaborate with engineering teams to debug and resolve issues
Requirements
Experience in software testing or QA engineering
Understanding of the Software Development Lifecycle, especially testing and integration
Experience testing Windows and PC-based software
Knowledge of scripting or programming (Python, Bash, Java, etc.)
Degree in Engineering, Computer Science, or related field ....Read more...
Type: Permanent Location: North London, England
Start: ASAP
Duration: Permanent
Salary / Rate: £40000 - £70000 Per Annum None
Posted: 2026-03-05 14:49:12
-
We are looking for a Fostering Social Worker for an Independent Fostering Agency.
You must have a Diploma/Degree in Social Work with 3 years post qualifying experience and the right to work in the UK (no VISA sponsorship)
About the team
This IFA is committed to safeguarding and promoting the welfare of children and their families and work with a therapeutic & creative approach.
The team work to complete Form F assessments for prospective foster carers.
About you
This role requires a Social Work Qualification with a minimum of 3 years post qualified experience.
You will need experience within Fostering post qualification whilst having an up-to-date understanding of relevant legislation, and experience completing Form F assessments.
A valid UK driving license is required to be considered for this position.
What's on offer?
No out of hours
£35.00 per hour umbrella (PAYE payment options available also)
Specialist team environment
An opportunity to work in a non-statutory IFA set up
Immediately available
Regular Supervision
For more information, please get in touch
Owen Giles - Consultant
07776 849119 ....Read more...
Type: Contract Location: North East England, England
Start: ASAP
Duration: 3-6 month
Salary / Rate: £30 - £35 per hour
Posted: 2026-03-05 14:36:46
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for MRT Filling Attendants.
GENERAL SUMMARY
Fill completed batches into appropriate containers or onto tanker for shipping purposes, following appropriate procedures for different fill-off methods as indicated on batch ticket.
Seal and apply appropriate labeling to containers as indicated on batch tickets.
Move finished goods to finished goods warehouse for shipping.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate appropriate vat to be filled off per batch ticket instructions Pre-mix material in vat before filling Locate appropriate materials (containers, strainers, equipment, etc.) used for filling, as indicated by batch ticket, and in fill-off manuals Always bond and ground containers before filling Obtain retain per instructions in fill-off procedures.
Labels retain as directed by QC department Complete fill-off procedure Clean vat and equipment using appropriate cleaning solution indicated on batch ticket Make proper notations on batch ticket regarding fill-off Apply appropriate labeling as instructed on batch ticket Move finished goods to warehouse if necessary Maintain neat and orderly work area
Pay: From $18.00 per hour Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Flexible spending account Health insurance Life insurance Paid time off Retirement plan Tuition reimbursement Vision insurance Schedule: 8 hour shift Monday to Friday Weekend availability Supplemental Pay: Signing bonus Ability to commute/relocate: Hudson, NC: Reliably commute or planning to relocate before starting work (Required) Experience: Basic reading and comprehension skills Basic math skills
Shift availability: Day Shift (Preferred) Night Shift (Preferred) Work Location: In person All candidates must pass background check and drug test to qualify for employment.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-03-05 14:09:23
