-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and offers constructive criticisms relative to variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Consult with Main Lab chemist on products more than 10% out of product specifications Upon approval of product record data onto Quality Control car and enter information into computer data base Consult QC manual for specific requirements for product analysis of production batches and customers special requirements Calibrate QC equipment as required Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude. Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2025-11-04 14:09:24
-
ASSOCIATE DENTIST REQUIRED IN YORKA new opportunity has become available for an associate dentist to join this well established practice in York.To start - As soon as possiblePermanent positionFull or part time consideredPay to be discussed further at interview stageAll candidates must be fully qualified and GDC registered in order to apply.
Type: Permanent Location: York, North Yorkshire, England
Salary / Rate: £0 per year
Posted: 2025-11-04 11:28:46
-
DENTAL ASSOCIATE REQUIRED IN POCKLINGTON A new opportunity has become available for an associate dentist to join this well established practice in Pocklington, East Riding of YorkshireTo start - ASAPWorking hours 9am-5pmFull or part time consideredPay to be discussed further at interview stageAll candidates must be fully qualified and GDC registered in order to apply.
Type: Permanent Location: Pocklington, E Riding of Yorkshire, England
Salary / Rate: £0 per year
Posted: 2025-11-04 11:28:37
-
DENTAL ASSOCIATE - BEVERLEYA new opportunity has become available for a Dental Associate to join an independent private practice, located in Beverley, East Yorkshire•Start date: Asap•Days of work: Monday - Friday (Full or part time)•Working Hours: M-F 8-5, will cover the practice on call rota and there is an option to work the Saturday mornings on that week covered •45-50% on private / 45% on lab billsPractice information:Listed building in the heart of a historic town, the practice has been open since 1962.
Private practice with Den plan care and Den plan essentials, currently 8 dental surgeries with plans to extend.
Computerised using SOE/Exact software with Digital Xray's, CBCT/OPT, Trios Scanner.
Location information:Car parking available and a 5 minute walk away from the train stationThe successful candidate must have right to work in the UK as sponsorship is not available for this position.All candidates must fully qualified and GDC registered with UK experience. ....Read more...
Type: Permanent Location: Beverley, E Riding of Yorkshire, England
Salary / Rate: £0 per year
Posted: 2025-11-04 11:14:41
-
Are you a Senior Support Worker or Team Leader who holds a level 3 in residential childcare? Are you looking for an opportunity in a brand new home?
My client are a family run business with residential homes and independent living services around the UK.
They are currently expanding and looking for team leaders for multiple brand new EBD homes.
The role would be assiting the manager in all aspects of the homes opperation, ensure all guidlines and regualtions are met, sleep in duties etc
Please note no sponsorship is available for this role.
The Role
£14.75 per hour (40 hour contract)
£55 per sleep in shift
Variable shift pattern over 7 days
About You
Level 3 diploma in residential childcare (required)
Experience as a senior or above in a residential setting
A full UK driving licence (preferred)
Does this sound like it could be the next step in your career, apply now!
Summer Smith
07436 412 945 ....Read more...
Type: Permanent Location: Northampton, England
Salary / Rate: Up to £14.75 per hour + £55 per sleep in
Posted: 2025-11-04 11:12:48
-
DENTAL ASSOCIATE REQUIRED IN WHITBYA new opportunity has become available for Dental Associate to join this well established practice in Whitby.To start - ASAPPermanent positionFull or part time, flexile on days.
Pay to be discussed further at interview stageWorking in a 3 surgery practice, fully computerised using SOE software.All candidates must be fully qualified and GDC registered in order to apply.
Type: Permanent Location: Whitby, North Yorkshire, England
Salary / Rate: £0 per year
Posted: 2025-11-04 10:59:49
-
The Job:
The Company: Internal Sales Engineer
Cash rich, leading distributor of Control & Automation equipment who have excellent partnerships with leading manufacturers.
Looking to strengthen their customer contact team with the recruitment of a high calibre Internal Sales Engineer.
Offer manufacture training through a mixture of internal and external courses.
Opportunity to develop within the business, getting valuable experience in the automation sector.
The Role of the Internal Sales Engineer
Internal role working for a company who specialise in the distribution of automation components and systems.
Office based role M-F 08.30-17.00
Typically dealing with PLC’s, HMI’s and low voltage control gear.
Excellent customer service skills essential.
Supporting internal and external customers with orders and quotes.
Telephone and Email based role.
Deal with inbound enquiries using the internal database and excel.
This is a full-time role and is office based.
Benefits of the Internal Sales Engineer
£35k-£38k basic salary
£Bonus
Pension
25 Days Annual leave + 8 bank holidays – rising with length of service
Membership to a health and wellbeing cashback scheme
Life Assurance of 2 times salary
Benefits Package
The Ideal Person for the Internal Sales Engineer
Technically astute with knowledge of automation systems and components.
Electrical / Electronic engineering qualification.
Some sales experience would be a bonus.
Ability to learn new products and skills.
Strong communication skills.
Good IT skills.
Hard working, self-motivated, outgoing, confident, team player.
If you think the role of Internal Sales Engineer is for you, apply now!
Consultant: Darren Wrigley
Email: darrenw@otrsales.co.uk
Tel no.
0208 397 4114
Candidates must be eligible to work and live in the UK.
About On Target
At On Target, we specialise in sales, technical and commercial jobs in the Engineering, Construction, Building Services, Medical & Scientific, and Commercial & Industrial Solutions sectors, enabling our consultants to become experts in their market sector.
We place all levels of personnel, up to Director across the UK and internationally. ....Read more...
Type: Permanent Location: West Yorkshire, Leeds, England
Start: ASAP
Duration: Full-Time
Salary / Rate: £35000 - £38000 Per Annum Excellent Benefits
Posted: 2025-11-04 10:39:05
-
Big plans.
Fresh starts.
Be the face of something new.We’re not just opening pubs.
We’re creating places people love.
Our growing pub company is bringing fresh energy to Northampton, and we’re on the hunt for a Managing Partner who’s ready to take the reins and make these new venues thrive.Why this is different: This isn’t about clocking in and out.
It’s about stepping up, leading from the front, and running the pub as if it’s your own.
You’ll be at the heart of the action — building a buzzing team, welcoming guests, and making sure every pint, plate, and smile hits the mark.What you’ll be doing:
Running the show day-to-dayHiring, coaching & inspiring your teamDriving sales and creating local buzzKeeping things ship-shape behind the scenes (compliance, stock, finances)Being the face of the pub in the community
What we’re looking for:
Energy, personality, and a genuine love for pubs & peopleSolid experience in hospitality or pub managementA leader who can roll up their sleeves and get stuck inSomeone who’s as excited about growth as we are
What you’ll get back:
A true partnership opportunity – real influence, real rewards16% of wet and dry sales along with a £225 a week Operators allowanceFree AccommodationCompetitive pay plus performance perksCareer growth as we keep expandingBacking from a passionate, ambitious head office team
This is more than a job.
It’s your chance to make your mark, create a pub people talk about, and grow with a company that’s going places fast. Location: Northampton Start: ASAP Apply now – send us your CV and tell us why you’d make the perfect Managing Partner for our brand-new pubs. ....Read more...
Type: Permanent Location: Northampton, Northamptonshire, England
Start: ASAP
Duration: Permanent
Salary / Rate: Competitive pay plus performance perks
Posted: 2025-11-04 07:56:05
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for Fill Off Attendants.
GENERAL SUMMARY
Fill completed batches into appropriate containers or onto tanker for shipping purposes, following appropriate procedures for different fill-off methods as indicated on batch ticket.
Seal and apply appropriate labeling to containers as indicated on batch tickets.
Move finished goods to finished goods warehouse for shipping.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate appropriate vat to be filled off per batch ticket instructions Pre-mix material in vat before filling Locate appropriate materials (containers, strainers, equipment, etc.) used for filling, as indicated by batch ticket, and in fill-off manuals Always bond and ground containers before filling Obtain retain per instructions in fill-off procedures.
Labels retain as directed by QC department Complete fill-off procedure Clean vat and equipment using appropriate cleaning solution indicated on batch ticket Make proper notations on batch ticket regarding fill-off Apply appropriate labeling as instructed on batch ticket Move finished goods to warehouse if necessary Maintain neat and orderly work area
Pay: From $16.00 per hour Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Flexible spending account Health insurance Life insurance Paid time off Retirement plan Tuition reimbursement Vision insurance Schedule: 8 hour shift Monday to Friday Weekend availability Supplemental Pay: Signing bonus Ability to commute/relocate: Hudson, NC: Reliably commute or planning to relocate before starting work (Required) Experience: Basic reading and comprehension skills Basic math skills
Shift availability: Day Shift (Preferred) Work Location: In person All candidates must pass background check and drug test to qualify for employment.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2025-11-04 06:08:21
-
JOB DESCRIPTION
GENERAL SUMMARY
Fill completed batches into appropriate containers or onto tanker for shipping purposes, following appropriate procedures for different fill-off methods as indicated on batch ticket.
Seal and apply appropriate labeling to containers as indicated on batch tickets.
Move finished goods to finished goods warehouse for shipping.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate appropriate vat to be filled off per batch ticket instructions Pre-mix material in vat before filling Locate appropriate materials (containers, strainers, equipment, etc.) used for filling, as indicated by batch ticket, and in fill-off manuals Always bond and ground containers before filling Obtain retain per instructions in fill-off procedures.
Labels retain as directed by QC department Complete fill-off procedure Clean vat and equipment using appropriate cleaning solution indicated on batch ticket Make proper notations on batch ticket regarding fill-off Apply appropriate labeling as instructed on batch ticket Move finished goods to warehouse if necessary Maintain neat and orderly work area
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
Basic reading and comprehension skills Basic math skills
Specific Knowledge, Skills, and Abilities Required
Basic machine operation capabilities
Reasoning Ability:
Ability to determine correctness of filling procedures in relation to specified guidelines learned during initial training and during any ongoing training.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions. While performing the essential functions of this job the employee is required to stand and use hands to grasp, handle or feel for entire shift.
The employee is required to walk, bend, stoop, and talk or hear.
Employee must regularly lift and/or move up to 50 pounds and lift and/or move up to 100 pounds with appropriate equipment. Employees must also be able to read and comprehend written instructions and remember processes and procedures for safe and accurate completion of duties for the entirety of the shift.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protective equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Number of batches filled Accuracy of filling Attendance Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2025-11-04 06:08:16
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for Filling Line Operators.
GENERAL SUMMARY
Responsible for filling production batches into aerosol containers as indicated on batch tickets.
Performs routine maintenance and makes mechanical or electrical adjustments or repairs to production line machines as needed.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate proper product and filling items such as cans, lids, labels, etc.
to fill aerosol containers per batch ticket instructions. Set up all equipment on filling line and make changeovers for filling new batch ticket orders. Review finished order for final counts on product and fill rates. Maintain neat and orderly work area. Pay: From $16.00 per hour Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Flexible spending account Health insurance Life insurance Paid time off Retirement plan Tuition reimbursement Vision insurance Schedule: 8 hour shift Monday to Friday Weekend availability Supplemental Pay: Signing bonus Ability to commute/relocate: Hudson, NC: Reliably commute or planning to relocate before starting work (Required) Experience: No experience necessary Fill off experience preferred Shift availability: Day Shift (Preferred) Night Shift (Preferred) Work Location: In person All candidates must pass background check and drug test to qualify for employment.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2025-11-04 06:08:07
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for Batch Makers/Mixer Techs.
GENERAL SUMMARY
Mixes chemicals, dry resins and nitrocellulose in the process of making lacquer's, sealers and thinners used in the furniture industry. Mixes different colors and bases in several different resin systems and tint them to match color standards provided by QA Lab.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Measure and weigh specified quantities of solvent and dry resins into proper blending tank according to formula sheet Match colors to standards provided by QA Lab by tinting products with tint colors specified on formula sheet Take products to QA Lab for QC checks and make final adjustments Maintain work area in a neat and orderly fashion Job Type: Full-time Pay: From $19.50 per hour Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Flexible spending account Health insurance Life insurance Paid time off Retirement plan Tuition reimbursement Vision insurance Schedule: 8 hour shift Monday to Friday Weekend availability Supplemental Pay: Signing bonus Ability to commute/relocate: Hudson, NC: Reliably commute or planning to relocate before starting work (Required) Experience: Manufacturing: 3 years (Preferred) Mixing/Batch Making: 1 year (Preferred) Shift availability: Day Shift (Preferred) Night Shift (Preferred) Work Location: In person All candidates must pass background check and drug test to qualify for employment.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2025-11-04 06:08:02
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for Fill Off Attendants.
GENERAL SUMMARY
Fill completed batches into appropriate containers or onto tanker for shipping purposes, following appropriate procedures for different fill-off methods as indicated on batch ticket.
Seal and apply appropriate labeling to containers as indicated on batch tickets.
Move finished goods to finished goods warehouse for shipping.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate appropriate vat to be filled off per batch ticket instructions Pre-mix material in vat before filling Locate appropriate materials (containers, strainers, equipment, etc.) used for filling, as indicated by batch ticket, and in fill-off manuals Always bond and ground containers before filling Obtain retain per instructions in fill-off procedures.
Labels retain as directed by QC department Complete fill-off procedure Clean vat and equipment using appropriate cleaning solution indicated on batch ticket Make proper notations on batch ticket regarding fill-off Apply appropriate labeling as instructed on batch ticket Move finished goods to warehouse if necessary Maintain neat and orderly work area
Pay: From $16.00 per hour Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Flexible spending account Health insurance Life insurance Paid time off Retirement plan Tuition reimbursement Vision insurance Schedule: 8 hour shift Monday to Friday Weekend availability Supplemental Pay: Signing bonus Ability to commute/relocate: Hudson, NC: Reliably commute or planning to relocate before starting work (Required) Experience: Basic reading and comprehension skills Basic math skills
Shift availability: Day Shift (Preferred) Work Location: In person All candidates must pass background check and drug test to qualify for employment.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2025-11-04 06:08:02
-
JOB DESCRIPTION
GENERAL SUMMARY
Assist with operating filling line and box completed product.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Maintain supplies for filling line, such as empty cans, boxes, etc. Assist operator in changing filing line components from run to run Check application of lids on containers and manually tighten any loose lids Print and apply labeling to filled boxes Box and palletize finished product Complete tracking forms and attach to pallets Move completed pallets to shipping staging areas
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
No experience necessary Fill off experience preferred
Specific Knowledge, Skills, and Abilities Required
Basic math/ measurement skills Basic reading and comprehension skills Reasoning Ability
Determine correct processes regarding standard filling line procedures as instructed in initial training and from batch ticket instructions. Work without continuous supervision and complete assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the essential functions of this job the employee is regularly required to stand, bend and/or stoop, grasp, handle or feel.
The employee is occasionally required to walk, talk and/or hear.
The employee must regularly lift and/or move up to 50 pounds.
Employees must also be able to read and comprehend written instructions and remember processes and procedures for safe and accurate completion of duties for the entirety of the shift.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
KEY PERFORMANCE INDICATORS (KPI)
Number of units produced daily Accuracy of units produced Appearance of work area Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2025-11-04 06:07:56
-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and offers constructive criticisms relative to variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Consult with Main Lab chemist on products more than 10% out of product specifications Upon approval of product record data onto Quality Control car and enter information into computer data base Consult QC manual for specific requirements for product analysis of production batches and customers special requirements Calibrate QC equipment as required Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude. Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2025-11-04 06:07:55
