-
JOB DESCRIPTION
GENERAL SUMMARY: Performs tasks and maintains logs required in preparation of hazardous waste for disposal.
Under the supervision of the Quality Control Manager, the hazardous waste attendant is responsible for collecting, separating, containing, sealing, weighing, marking, labeling, and preparing waste for transport in accordance with all applicable regulatory requirements.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Empty obsolete lab retains into appropriate collection containers for proper disposal.
Empty obsolete finish goods into appropriate collection containers for proper disposal. Empty collected drums of waste into Kiln Direct box. Must keep accurate logs. Empties, organizes, and keeps clean containers according to applicable regulations. Ensures waste compliance under supervision. Monitors waste collection and capacity; alerts manager to ensure that units are emptied before reaching full capacity. Operates and monitors the distillation units. Inspects and accurately inventories waste staging areas. Must maintain a valid forklift operator's certification. Assist in the on-site transfer of waste to staging areas as necessary. Assists vendors and transporters with waste collection and provides manifests. Maintains waste area in a clean and orderly condition. Always ensures safe working conditions; utilizes safety equipment and/or protective equipment as directed (i.e.
safety gloves and eye protection) and follows defined safety procedures. Maintain Spill Kit and absorbent pad inventories; notifies manager for deficiencies. Assists in the collection of samples that are required. Reports any problems or deviations to the manager immediately. Receive environment and safety training as required. Perform other job duties as assigned. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
Previous manufacturing, quality control and/or forklift experience preferred. High school diploma or equivalent preferred.
Specific Knowledge, Skills, and Abilities Required
Ability to receive and maintain forklift certification.
Ability to understand and provide practicing knowledge of tasks given. Excellent communications skills. Basic machine operation capabilities . Basic math, reading and comprehension skills.
Attention to detail and awareness.
Reasoning Ability: Ability to determine correct procedures in relation to specified guidelines learned during initial training and during any ongoing training.
CERTIFICATES, LICENSES, REGISTRATIONS: Forklift Certification.PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions. While performing the essential functions of this job the employee is required to stand and use hands to grasp, handle or feel.
The employee is required to walk, bend, stoop, and talk or hear.
Employees must regularly lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds using appropriate equipment..
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protective equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Accuracy of hazardous waste disposal and associated logs. Cleanliness, organization, and compliance of area. Movement of waste in a timely manner. Excellent Attendance.
ABOUT US
RPM International Inc.
is a $5.5 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces, to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
The company operates across four reportable segments, including construction products, performance coatings, consumer and specialty products.
It boasts a diverse portfolio with hundreds of brand-name products-many of which are leaders in the markets they serve. Shares of the company's common stock are traded on the New York Stock Exchange under the symbol RPM and are owned by more than 740 institutional investors and 139,000 individuals.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-10-29 14:14:46
-
JOB DESCRIPTION
GENERAL SUMMARY
Move materials with forklift to appropriate locations within department and around facility.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Check inventory of machine tape, hot glue, UPC labels, box labels, ribbons, pallets, etc.
Order materials and maintain supplies necessary for the daily running of materials, such as cans, boxes, lids, pallet ship sheets, etc.
Maintain supplies for filling line, such as empty cans, boxes, etc.
and operate forklift to manage supply of materials to line
Move full pallets of finished material to pallet wrappers and wrap with shrink wrap.
Move completed pallets to shipping staging areas
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
Previous forklift experience preferred
Fill off experience preferred
Specific Knowledge, Skills, and Abilities Required
Basic math/ measurement skills
Basic reading and comprehension skills
Reasoning Ability
Determine correct processes regarding standard filling line procedures as instructed in initial training and from batch ticket instructions.
Work without continuous supervision and complete assigned projects.
CERTIFICATES, LICENSES, REGISTRATIONS: Must be able to obtain forklift license.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions.
While performing the essential functions of this job the employee is regularly required to stand, bend and/or stoop, grasp, handle or feel.
The employee is occasionally required to walk, talk and/or hear.
The employee must regularly lift and/or move up to 50 pounds.
Employee operates forklift for most of shift.
Employees must also be able to read and comprehend written instructions and remember processes and procedures for safe and accurate completion of duties for the entirety of the shift.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
KEY PERFORMANCE INDICATORS (KPI)
Accuracy of units produced
Appearance of work areaApply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-10-29 14:14:44
-
JOB DESCRIPTION
This individaul is responsible for management of Tremco's various product safety compliance programs to ensure the safe and legal packaging, distribution, and application of Tremco products globally.
Requirements:
Responsible for managing Tremco's product safety compliance programs, specifically maintaining compliance with U.S.
TSCA, EU REACH, EU CLP, and other global chemical regulations.
This includes coordination of chemical reviews and raw material evaluations with the R&D and Technical Service staff, as well as coordination with RPM international colleagues for import/export compliance.
Interfacing with Product Managers via SAP and SmartSheet to facilitate new product rollouts.
Responsible for maintaining Tremco's transportation safety data in SAP to ensure packaging and transport compliance with U.S.
DOT, IMDG, and IATA regulations.
Responsible for maintaining product Safety Data Sheets in the SAP database for all Tremco.
Assist marketing department to ensure product labels and technical data sheets are compliant with various regulations and review/approve all labels prior to release.
Assist in maintaining North American Chemical Management System.
Duties include developing, reviewing and releasing SDSs and Label Guides, and reviewing and updating substance toxicological data.
Compile data for submissions related to environmental programs (TSCA, TRI, etc.) and corporate EHS submissions.
Responsible for interfacing with agency representatives during compliance inspections.
Stay informed of global and national changes in EHS laws and regulations, proactively adapting the company's systems and policies to maintain compliance.The above description identifies only the primary duties pertaining to this position.
Additional tasks are performed, as required, and do not significantly alter this description.
Background Requirements:
B.S.
Degree in Safety / Environmental Management or Safety Sciences.
3 to 5 years' experience preferred
Excellent verbal, written and interpersonal skills
Experience working with SAP preferredApply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2026-10-29 14:14:44
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 2nd Shift Fill Off Attendants ($2 Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY
Fill completed batches into appropriate containers or onto tanker for shipping purposes, following appropriate procedures for different fill-off methods as indicated on batch ticket.
Seal and apply appropriate labeling to containers as indicated on batch tickets.
Move finished goods to finished goods warehouse for shipping.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate appropriate vat to be filled off per batch ticket instructions
Pre-mix material in vat before filling
Locate appropriate materials (containers, strainers, equipment, etc.) used for filling, as indicated by batch ticket, and in fill-off manuals
Always bond and ground containers before filling
Obtain retain per instructions in fill-off procedures.
Labels retain as directed by QC department
Complete fill-off procedure
Clean vat and equipment using appropriate cleaning solution indicated on batch ticket
Make proper notations on batch ticket regarding fill-off
Apply appropriate labeling as instructed on batch ticket
Move finished goods to warehouse if necessary
Maintain neat and orderly work area
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
Basic reading and comprehension skills
Basic math skills
Specific Knowledge, Skills, and Abilities Required
Basic machine operation capabilities
Reasoning Ability:
Ability to determine correctness of filling procedures in relation to specified guidelines learned during initial training and during any ongoing training.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions.
While performing the essential functions of this job the employee is required to stand and use hands to grasp, handle or feel for entire shift.
The employee is required to walk, bend, stoop, and talk or hear.
Employee must regularly lift and/or move up to 50 pounds and lift and/or move up to 100 pounds with appropriate equipment.
Employees must also be able to read and comprehend written instructions and remember processes and procedures for safe and accurate completion of duties for the entirety of the shift.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protective equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Number of batches filled
Accuracy of filling
AttendanceApply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-10-29 14:14:43
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 2nd Shift QC Technician (Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY: Assists with application and monitoring of established quality procedures and methods for production batches and new raw materials.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and communicates variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects in D365.
Expedites and follows up changes to allow for prescribed quality standards.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Check production batches by comparison to standards
Advise batchmaker of any necessary adjustments to apply to product batch
Recheck batch after adjustments are made until product is within standard product specifications
Use proper analytical tools to compare product to standard specifications and to wet and/or dry samples
Record results of comparison in D365
Consult with QC manager on products more than 10% out of product specifications
Upon approval of product record data in D365
Check bulk raw materials against standard product specifications upon receipt
Consult Quality control manual for specific requirements for product analysis of production batches as well as raw materials
Calibrate QC/QA equipment as required
Other duties as assigned by supervisor/manager
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
High school diploma
Proficient math and written communication skills
Good computer skills - knowledge of Excel required
Up to three years in industry related QC field helpful
Prior batchmaking experience helpful
Specific Knowledge, Skills, and Abilities Required
Successful completion of Munsel Color test, helpful
Familiarity with products used in batchmaking processes
Familiarity with standard analytical tools
Reasoning Ability
Employee must work with limited supervision following written and verbal instructions.
CERTIFICATES, LICENSES, REGISTRATIONS: N/A
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions.
Occasional lifting and/or carrying of up to 40 lbs.
Is required.
Standing for extended periods of time (approximately 90% of 8-hour shift) is required with some sitting, walking, reaching, handling, bending and stooping.
WORK ENVIRONMENT: Normal laboratory industry related environment conditions are present in the QC/QA laboratory.
Employee on occasion will be required to go into the manufacturing areas, where normal manufacturing environment conditions are present.
The company provides any required personal protective equipment.
KEY PERFORMANCE INDICATORS (KPI)
Turnover of correct production batches
QC efficiency as gauged by customer RMA'sApply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-10-29 14:14:41
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 3rd Shift Fill Off Attendants (Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY
Fill completed batches into appropriate containers or onto tanker for shipping purposes, following appropriate procedures for different fill-off methods as indicated on batch ticket.
Seal and apply appropriate labeling to containers as indicated on batch tickets.
Move finished goods to finished goods warehouse for shipping.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate appropriate vat to be filled off per batch ticket instructions
Pre-mix material in vat before filling
Locate appropriate materials (containers, strainers, equipment, etc.) used for filling, as indicated by batch ticket, and in fill-off manuals
Always bond and ground containers before filling
Obtain retain per instructions in fill-off procedures.
Labels retain as directed by QC department
Complete fill-off procedure
Clean vat and equipment using appropriate cleaning solution indicated on batch ticket
Make proper notations on batch ticket regarding fill-off
Apply appropriate labeling as instructed on batch ticket
Move finished goods to warehouse if necessary
Maintain neat and orderly work area
Pay: From $18.00 per hour
Benefits:
401(k)
401(k) matching
Dental insurance
Employee assistance program
Flexible spending account
Health insurance
Life insurance
Paid time off
Retirement plan
Tuition reimbursement
Vision insuranceSchedule:
8 hour shift
Sunday to Thursday
Weekend availabilitySupplemental Pay:
Signing bonusAbility to commute/relocate:
Hudson, NC: Reliably commute or planning to relocate before starting work (Required)Experience:
Basic reading and comprehension skills
Basic math skills
Shift availability:
Night Shift (Preferred)Work Location: In person
All candidates must pass background check and drug test to qualify for employment.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-10-29 14:14:39
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 2nd Shift Aerosol Line Operators (Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY
Responsible for filling production batches into aerosol containers as indicated on batch tickets.
Performs routine maintenance and makes mechanical or electrical adjustments or repairs to production line machines as needed.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate proper product and filling items such as cans, lids, labels, etc.
to fill aerosol containers per batch ticket instructions.
Set up all equipment on filling line and make changeovers for filling new batch ticket orders.
Review finished order for final counts on product and fill rates.
Maintain neat and orderly work area.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
No experience necessary
Fill off experience preferred
Specific Knowledge, Skills, and Abilities Required
Basic math/ measurement skills
Basic reading and comprehension skills
Basic mechanical and machine repair skills
Prior Aerosol Line Attendant knowledge preferred
Reasoning Ability
Ability to determine correct processes regarding standard aerosol filling procedures as instructed in initial training.
Ability to determine and make basic mechanical adjustments and know when additional assistance is needed.
The ability to work without continuous supervision and complete assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions.
While performing the essential functions of this job the employee is regularly required to stand and use hands to grasp, handle or feel.
The employee is occasionally required to walk, bend, stoop, talk and/or hear.
Employee must regularly lift and/or move up to 20 pounds and occasionally lift and/or move up to 100 pounds.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is regularly exposed to moving mechanical parts and occasionally to wet and/or humid conditions.
The noise level in the work environment is usually moderate.
KEY PERFORMANCE INDICATORS (KPI)
Number of units produced online each day
Accuracy of units produced
Proper maintenance of equipment
Appearance of work area.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-10-29 14:14:37
-
JOB DESCRIPTION
GENERAL SUMMARY
Move materials with forklift to appropriate locations within department and around facility.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Check inventory of machine tape, hot glue, UPC labels, box labels, ribbons, pallets, etc.
Order materials and maintain supplies necessary for the daily running of materials, such as cans, boxes, lids, pallet ship sheets, etc.
Maintain supplies for filling line, such as empty cans, boxes, etc.
and operate forklift to manage supply of materials to line
Move full pallets of finished material to pallet wrappers and wrap with shrink wrap.
Move completed pallets to shipping staging areas
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
Previous forklift experience preferred
Fill off experience preferred
Specific Knowledge, Skills, and Abilities Required
Basic math/ measurement skills
Basic reading and comprehension skills
Reasoning Ability
Determine correct processes regarding standard filling line procedures as instructed in initial training and from batch ticket instructions.
Work without continuous supervision and complete assigned projects.
CERTIFICATES, LICENSES, REGISTRATIONS: Must be able to obtain forklift license.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions.
While performing the essential functions of this job the employee is regularly required to stand, bend and/or stoop, grasp, handle or feel.
The employee is occasionally required to walk, talk and/or hear.
The employee must regularly lift and/or move up to 50 pounds.
Employee operates forklift for most of shift.
Employees must also be able to read and comprehend written instructions and remember processes and procedures for safe and accurate completion of duties for the entirety of the shift.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
KEY PERFORMANCE INDICATORS (KPI)
Accuracy of units produced
Appearance of work areaApply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-10-29 14:14:36
-
JOB DESCRIPTION
GENERAL SUMMARY: Performs tasks and maintains logs required in preparation of hazardous waste for disposal.
Under the supervision of the Quality Control Manager, the hazardous waste attendant is responsible for collecting, separating, containing, sealing, weighing, marking, labeling, and preparing waste for transport in accordance with all applicable regulatory requirements.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Empty obsolete lab retains into appropriate collection containers for proper disposal.
Empty obsolete finish goods into appropriate collection containers for proper disposal. Empty collected drums of waste into Kiln Direct box. Must keep accurate logs. Empties, organizes, and keeps clean containers according to applicable regulations. Ensures waste compliance under supervision. Monitors waste collection and capacity; alerts manager to ensure that units are emptied before reaching full capacity. Operates and monitors the distillation units. Inspects and accurately inventories waste staging areas. Must maintain a valid forklift operator's certification. Assist in the on-site transfer of waste to staging areas as necessary. Assists vendors and transporters with waste collection and provides manifests. Maintains waste area in a clean and orderly condition. Always ensures safe working conditions; utilizes safety equipment and/or protective equipment as directed (i.e.
safety gloves and eye protection) and follows defined safety procedures. Maintain Spill Kit and absorbent pad inventories; notifies manager for deficiencies. Assists in the collection of samples that are required. Reports any problems or deviations to the manager immediately. Receive environment and safety training as required. Perform other job duties as assigned. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
Previous manufacturing, quality control and/or forklift experience preferred. High school diploma or equivalent preferred.
Specific Knowledge, Skills, and Abilities Required
Ability to receive and maintain forklift certification.
Ability to understand and provide practicing knowledge of tasks given. Excellent communications skills. Basic machine operation capabilities . Basic math, reading and comprehension skills.
Attention to detail and awareness.
Reasoning Ability: Ability to determine correct procedures in relation to specified guidelines learned during initial training and during any ongoing training.
CERTIFICATES, LICENSES, REGISTRATIONS: Forklift Certification.PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions. While performing the essential functions of this job the employee is required to stand and use hands to grasp, handle or feel.
The employee is required to walk, bend, stoop, and talk or hear.
Employees must regularly lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds using appropriate equipment..
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protective equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Accuracy of hazardous waste disposal and associated logs. Cleanliness, organization, and compliance of area. Movement of waste in a timely manner. Excellent Attendance.
ABOUT US
RPM International Inc.
is a $5.5 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces, to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
The company operates across four reportable segments, including construction products, performance coatings, consumer and specialty products.
It boasts a diverse portfolio with hundreds of brand-name products-many of which are leaders in the markets they serve. Shares of the company's common stock are traded on the New York Stock Exchange under the symbol RPM and are owned by more than 740 institutional investors and 139,000 individuals.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-10-29 14:14:34
-
JOB DESCRIPTION
The Executive Assistant will provide high-level administrative support to members of the executive leadership team.
This role demands exceptional organizational skills, attention to detail, and the ability to manage competing priorities in a fast-paced environment.
Key responsibilities include managing calendars, coordinating meetings, arranging travel, preparing communications, and handling confidential information with professionalism and discretion.
Essential Functions
The following responsibilities are general duties that a particular employee in this position may or may not be required to perform.
The actual duties required of this position may vary.
Manage complex calendars, including scheduling meetings, appointments and travel for executive leaders.
Coordinate logistics for meetings, conferences and events, including preparation of materials, agendas and follow-up items.
Screen and prioritize incoming communications, including emails, calls and mail; respond or route as appropriate.
Manage a variety of complex and confidential situations and duties to support executive management in accordance with company policies, practices, and procedures.
Prepare executive expense reports.
Prepare, edit and proofread correspondence, presentations, reports and other documents.
Support annual budget (GTO) process by coordinating deadlines and assisting in the preparation of key deliverables.
Maintain organized filing systems and ensure timely access to critical documents and records.
Assist with the upkeep of HR databases and personnel records, ensuring data is accurate, confidential and compliant with company protocol.
Assist with tracking, processing, and organizing legal invoices, including coordination with internal legal team and external vendors to ensure timely and accurate billing.
Performs other activities assigned.
Minimum Requirements:
Associates degree.
3-5 years of experience in an administrative or executive support role.
Experience supporting senior executives or C-level leaders strongly preferred.
Advanced proficiency in MS Office (Outlook, Word, PowerPoint, and Excel).
Experience in calendar management and expense reporting.
Professional demeanor and ability to interact with internal and external stakeholders at all levels.
Proven ability to handle confidential and sensitive information with discretion.
Flexibility and adaptability in managing multiple and shifting priorities while maintaining a high degree of accuracy and attention to detail.
Excellent organizational and time management skills.
Excellent written and verbal communication skills.
Strong problem-solving skills and ability to work independently with minimal supervision; seeks to understand the underlying need, asks timely questions when clarification is required, and identifies opportunities to improve processes and outcomes.
Preferred Requirements:
Familiarity with productivity tools (e.g, Teams, Concur, Oracle).
Commitment to excellence - perform duties at the highest level possible on a consistent basis.
Excellent communicator - able to interact with people of all levels in a confident, professional manner.
Business sense - has a strong business sense and ability to perform work with tact and judgment; handle confidential information with discretion.
Service and stakeholder focus - builds effective relationships across functions, seeks to understand stakeholder needs, and delivers responsive support aligned with those needs.
Strong event planning and logistics coordination experience.
Experience preparing executive-level reports, presentations and communications.
Self-starter who proactively anticipates needs, identifies opportunities to contribute, takes ownership through completion, and resolves issues without waiting to be directed.
Benefits and Compensation
The pay range for applicants in this position generally ranges between $28.85/hour and $38.46/hour.
The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law.
In addition to career advancement and growth, continuous training, and mentoring opportunities, PCG/Stonhard offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
ABOUT US
RPM Performance Coatings is a strategic operating unit of RPM International Inc.
RPM Performance Coatings joins exceptional products, technologies, service and individuals together to provide a comprehensive building solution package to markets throughout North America, as well as internationally.
RPM Performance Coatings products and services are sold directly to contractors, distributors and end users, such as industrial manufacturing facilities, public institutions and other commercial customers.
RPM Performance Coatings generated $1.5 billion in net sales for the fiscal year ended May 31, 2024.Apply for this ad Online! ....Read more...
Type: Permanent Location: Maple Shade, New Jersey
Posted: 2026-10-29 14:14:34
-
JOB DESCRIPTION
Title: Technician - Fireproofing Applications
Location: St.
Louis, MO
Summary:
As a Fireproofing Applications Technician, you'll play a critical role in applying intumescent and cementitious fireproofing products to test articles with precision and efficiency.
You'll ensure samples are completed accurately, delivered on schedule, and meet the highest quality standards.
This hands-on position requires strong mechanical aptitude and the ability to perform all duties of an application technician, including maintaining and operating specialized spray equipment.
If you thrive in a technical, fast-paced environment and take pride in craftsmanship, this role is for you!
Minimum Requirements:
High school diploma or equivalent required; additional college coursework, including chemistry, is preferred.
Minimum of 1-3 years of laboratory experience, or a combination of relevant education and laboratory experience.
Must successfully pass a Jaeger Eye Test.
Physical Requirements:
Ability to lift up to 50 lbs and utilize personal protective equipment.
Must pass annual respirator medical evaluation and pulmonary function test per OSHA standards; respirator use required at least 40% of the time.
Comfortable working with a variety of chemicals and materials, including epoxies, fiberglass, zincs, urethanes, phenolics, coal tars, polyurethanes, isocyanates, and more.
Skilled in operating, repairing, and maintaining equipment requiring strong hand-eye coordination, including airless pumps, sandblasting tools, welding equipment, and power saws.
Essential Functions:
Lead the way in mastering surface preparation and application techniques for intumescent and cementitious fireproofing products.
Drive hands-on excellence by setting up and operating spray equipment for in-house demonstrations, training sessions, evaluations, and special projects.
Guarantee top-tier quality by ensuring all panels meet rigorous standards outlined in the Applications Department Quality Control Procedures Manual.
Keep operations running smoothly through proactive maintenance and repair of spray equipment, spray booths, blast cabinets, pin welders, and hand/power tools.
Represent Carboline in the field with short-term travel for demonstrations, training, troubleshooting, and sales support.
Operate and optimize mixing equipment, airless and conventional spray systems, and other tools to deliver flawless product applications.
Apply expertise in interpreting surface preparation standards and showcasing inspection techniques.
Collaborate on innovation by assisting with evaluations of new or revised products and equipment.
Own the process of managing panel orders from Sales Representatives and Technical Service teams, including scheduling and shipping.
Ensure readiness by ordering and stocking materials and supplies for seamless department operations.
Champion safety and cleanliness by maintaining a hazard-free work environment and adhering to all safety and environmental regulations.
Be proactive in risk management through hazard recognition, injury prevention, and prompt incident reporting.
Protect the environment by following all hazardous material and waste management guidelines.
Stay compliant and informed by completing annual RCRA Hazardous Waste and Contingency Plan training and applying this knowledge daily.
Lead by example in promoting Carboline's commitment to safety and quality programs.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.
Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best."Apply for this ad Online! ....Read more...
Type: Permanent Location: St. Louis, Missouri
Posted: 2026-10-29 14:14:33
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 2nd Shift Maintenance Mechanics ($2 Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY:
Perform a variety of general repairs, installations, and maintenance on facility equipment, building and utility systems.
Perform general carpentry, floor repairs and general repairs of facility.
Maintain record of maintenance and repairs.
Make routine checks and inspections of equipment for proper lubrication and other general maintenance functions.
Check out problem areas and make repairs and adjustments as needed.
Refer complex situations to supervisor.
Operate machines, tools, perform welding and other maintenance tasks as required.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Maintain, adjust, and repair machinery and equipment throughout facility
Perform general carpentry work and repairs to building and grounds
Perform inspections of equipment and machines and make necessary repairs as directed
Maintain log of maintenance performed on machinery and equipment
Respond to maintenance request items as assigned by supervisor
Operate tools and equipment in a safe and efficient manner
Maintain clean and safe work environment using correct tools properly
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
High school diploma or equivalent
Minimum 4 years experience in maintenance field
Basic math skills
Basic reading and comprehension skills
Specific Knowledge, Skills, and Abilities Required
Knowledge of plumbing, carpentry, painting, machine servicing, electrical skills and pneumatics
Work in cross-functional environment, with frequent interruptions to daily schedule
Reasoning Ability:
Determine correctness of a variety of processes in relation to specified guidelines learned through prior experience in field
Relies on experience and judgment to accomplish goals
Work without continuous supervision while completing assigned projects
CERTIFICATES, LICENSES, REGISTRATIONS: None required
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform essential functions.
While performing the essential functions of this job the employee is regularly required to stand, reach, handle, twist and/or turn, talk, see and hear and lift and/or move up to 50 pounds.
The employee is frequently required to bend, squat, and stoop.
The employee occasionally is required to sit, walk, lift, carry, push, pull, climb and kneel, write and drive.
WORK ENVIRONMENT:
The work environment is representative of those an employee would encounter in a normal paint manufacturing environment.
The noise level is usually moderate.
KEY PERFORMANCE INDICATORS (KPI):
Performance of assigned tasks
Adherence to Preventive Maintenance Program and hours of down time in plant
Knowledge of assigned area of responsibility
Timeliness and accuracy of project completion
Attendance
AttitudeApply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-10-29 14:14:31
-
JOB DESCRIPTION
Job Description
We are seeking experienced Commercial Roofers to join our team.
The skilled Commercial Roofers will be responsible for the maintenance, repairs, and installation of commercial roofing systems.
$23-29/hour (not including prevailing wage)
Benefits:
401K
Health Insurance
Paid time-off
Mileage reimbursement
Continuing education
Position Duties & Responsibilities:
Installation of different types of roofing systems such as BUR, EPDM, Single-ply, coatings, and other forms of low-slope roofing systems
Safe operation of tools of the trade (hand tools, power tools etc.)
Follow OSHA regulations and other regulatory agencies relating to job site safety, demonstrates safe work practices.
Work outside in a wide variety of weather conditions and to meet the physical demands of the position, including mobility needed to complete tasks.
Climbing and operating on ladders, able to handle at least 50 lbs.
Effective communication with foremen, supervisors, and other WTI and Tremco employees
Job Requirements:
Commercial Roofing: All levels; at least 1 year preferred
Reliable form of transportation
Acceptable background check per company standardsAbility to pass a pre-employment drug screen and physical
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Houston, Texas
Posted: 2026-10-29 14:14:29
-
JOB DESCRIPTION
Seeking several motivated technicians to help support our mission of "healthy buildings, healthy people" - all levels of experience will be considered.
We offer paid training and opportunities for rapid career progression for those interested in management opportunities.
Technicians will be responsible for the cleaning, sanitizing, and restoring commercial HVAC systems (to include duct cleaning, coil cleaning/steaming, protective coatings, etc.).
If you have experience or vocational training in the commercial construction and/or HVAC industry, contact us for an immediate interview.
If you don't have experience but are interested in career growth and learning a new trade, please apply.
We offer world class, industry leading, benefits and opportunities for advancement.
Benefits include:
401k with company match
Comprehensive medical/dental
Earned Paid time off
Paid training and continuing education
Life insurance
Company Pension Plan
Employee Assistance Program
Company paid travel, lodging and per diem.
It's a plus if you have a valid driver's license.
Generous sign-on and referral bonuses are available!
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Clearwater, Florida
Posted: 2026-10-29 14:14:28
-
JOB DESCRIPTION
As our Machine Operator you are to package paint and related products by operating, setting up, adjusting, and performing QC checks while tending to machines/hand fills to package paint in a safe, consistent, and efficient manner, according to specifications.
Solving challenges is the very foundation of who we are.
After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint.
When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution.
Today, that discovery is Rust-Oleum Corporation.
The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today.
When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry.
Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry.
Here's what you can expect every day:
Inspect and examine products for quality, packaging accuracy, conformance to specifications, and external defects.
Change over equipment, adjust equipment, or otherwise adjust machines to improve equipment performance and quality.
Set and adjust speed, temperature, product flow, and positions and tolerances of equipment.
Examine job orders to determine details such as quantities to be filled, production times, stock specifications, BOM's, and SKU sequences.
Monitor filling equipment to maintain specified operating levels and to detect malfunctions, making adjustments as necessary.
Operate equipment at most efficient speed to ensure proper quality and output.
Responsibility for the equipment performance, efficient changeovers, operation, and preventative maintenance.
High school graduate or equivalent.
Experience with CNC Operations preferred.
Ability to read and fully understand batch cards and instructions to effectively communicate directions to other associates.
Ability to do basic math.
Ability to read and understand various meters, scales and electronic read outs.
Ability to enter computer data.
Industrial experience is desirable.
Good mechanical aptitude.
Ability to coordinate the work of others.
Ability to solve problems in a team environment.
Ability to lift 75 pounds
Salary Target Range: $20.00 p/h - $22.00 p/h.
Bonus Eligible
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers (9.5) paid holidays and (2) floating holiday per year.
You are also eligible to earn (2) weeks of vacation on an annualized basis.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Attleboro, Massachusetts
Posted: 2026-10-29 14:14:25
-
JOB DESCRIPTION
Title: Technician - Industrial Coatings
Location: St.
Louis, MO
Summary:
Join our Research & Development team and play a hands-on role in developing and improving corrosion-resistant coatings, linings, and fireproofing products.
In this role, you'll work alongside experienced lab professionals to support day-to-day operations, contribute to product development, and help ensure quality and performance standards are met.
Minimum Requirements:
High school diploma or equivalent required
Completion of at least one year of college-level chemistry coursework or 1-3 years of relevant laboratory experience preferred.
Must pass a Jaeger Eye Test.
Physical Requirements:
Ability to lift up to 50 pounds.
Exposure to various chemicals, including but not limited to amines, polyamides, isocyanates, epoxies, alkyds, acrylics, and certain inorganic compounds.
Proper use of personal protective equipment (PPE) is required at all times.
Must be able to pass an annual respirator medical evaluation and pulmonary function test in accordance with OSHA regulations.
Essential Functions:
Operate laboratory instruments and equipment while following established testing procedures.
Maintain accurate, organized laboratory notes and documentation; assist with report writing as needed.
Conduct quality control testing, grade test panels, and collect data for product evaluation and troubleshooting.
Utilize laboratory computer systems for reporting, formula calculations, graphics, and inventory tracking.
Support the preparation and evaluation of lab-scale batches according to prescribed formulas.
Learn and apply coating techniques using spray, roller, and brush methods.
Reference and follow Material Safety Data Sheets (MSDS) for raw materials and finished goods.
Adhere to all safety, environmental, and quality procedures, including proper use of PPE and hazardous material handling.
Proactively identify hazards, support injury prevention efforts, and report incidents promptly.
Collaborate positively with team members, supervisors, and cross-functional partners.
Complete required training (including RCRA Hazardous Waste and Contingency Plan) and apply it in daily work.
Demonstrate a strong commitment to company safety and quality standards.
Who We Are:
Carboline is a St.
Louis-based coatings manufacturer with a global reach.
The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world.
Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously.
Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
If you want to be part of a growing global organization with opportunity for growth, we would like to meet you.
What We Offer:
We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions.
Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan.Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace.
Individuals with Disabilities and Protected Veterans are encouraged to apply.
"In order to be the best, we must hire the best."Apply for this ad Online! ....Read more...
Type: Permanent Location: St. Louis, Missouri
Posted: 2026-10-29 14:14:25
-
JOB DESCRIPTION
Job Title: Customer Service Manager
Location: Vernon Hills
Reports To: Director, Customer Service & Product Support
Direct Reports: Yes
Position Summary:
We are seeking an experienced, analytical Customer Service Manager to lead our B2B Customer Service, Returns, and Order Entry operations.
This leader will be accountable for service performance, timely and accurate order processing, issue resolution, workforce effectiveness, employee engagement, and the continued development of the team.
The ideal candidate brings progressive leadership experience in a complex service or order-management environment, hands-on SAP knowledge, and the ability to translate data into practical actions that improve the customer experience and operational results.
Key Responsibilities:
Lead team performance: Direct the day-to-day work of the Customer Service, Returns, and Order Entry teams, set clear priorities, and ensure department goals and service expectations are met.
Manage B2B service operations: Oversee inbound customer contacts, order-related inquiries, issue resolution, and escalations while maintaining a professional and customer-focused approach.
Ensure accurate, timely order processing: Monitor workflow and remove barriers to the on-time and accurate processing of customer orders, returns, and related transactions.
Use data to drive decisions: Develop, monitor, and communicate operational metrics and trends.
Analyze call, order, backlog, quality, and service data to identify root causes, risks, and improvement opportunities.
Coach and develop employees: Provide regular feedback, coaching, and development.
Complete performance evaluations and hold employees accountable for expectations and results.
Manage workforce needs: Oversee scheduling, workload coverage, timekeeping, and attendance compliance to support customer demand and business priorities.
Hire and onboard talent: Participate in recruiting and selection, lead effective onboarding, and ensure new employees are trained on systems, processes, and service standards.
Maintain training and procedures: Create, update, and reinforce training materials, standard work, policies, and procedures to improve consistency and knowledge retention.
Partner cross-functionally: Work closely with Supply Chain, Distribution, Product Management, Sales, IT, and other business partners to resolve issues, communicate customer needs, and implement process improvements.
Lead continuous improvement: Identify opportunities to simplify work, improve service levels, strengthen controls, and increase efficiency through process, system, and reporting improvements.
Strengthen employee engagement: Maintain regular communication, recognize contributions, address concerns, and support employee growth and retention.
Build alignment across teams: Create consistency across Customer Service, Order Entry, and Returns through clear expectations, strong communication, and shared ownership of customer and operational outcomes.
Lead change and technology adoption: Guide employees through system, process, and organizational changes while reinforcing communication, training, adoption, and accountability.
Required Qualifications:
Bachelor's degree or equivalent combination of education and relevant experience.
Minimum of five years of people-management experience in a B2B customer service call center or similarly complex customer service operation.
Previous SAP experience, including working with customer orders and related service transactions.
Strong analytical skills with demonstrated experience using data, KPIs, and operational reporting to identify trends and guide decisions.
Proven ability to lead, coach, and develop employees while driving accountability and measurable results.
Experience managing customer escalations, conflict resolution, and cross-functional problem solving.
Excellent written and verbal communication skills, with the ability to communicate clearly with employees, customers, and business partners.
Strong business acumen, attention to detail, organization, and the ability to manage multiple priorities in a fast-paced environment.
Proficiency with Microsoft Office, particularly Excel, and experience with call center or customer contact technology.
Experience leading employees through process, system, or organizational change.
Preferred Qualifications:
Experience leading teams responsible for customer service, order entry, and/or returns.
Experience building dashboards, scorecards, or recurring operational reporting.
Background in a manufacturing, distribution, or consumer products environment.
Experience leading process improvement, system implementation, or automation initiatives.
SAP S/4HANA experience.
Leadership Profile:
Balances customer focus with operational discipline and sound business judgment.
Uses facts and data to understand problems, set priorities, and follow through on results.
Builds ownership within the team rather than solving every issue for employees.
Creates strong partnerships across functions and communicates risks early.
Remains calm, professional, and decisive when managing urgent or complex issues.
Leads with consistency, approachability, and a genuine commitment to employee development.Salary Target Range: $86,000 - $102,000, bonus eligible
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and one floating holiday per year.
You are also eligible to earn three weeks of vacation on an annualized basis.
Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Vernon Hills, Illinois
Posted: 2026-10-29 14:14:24
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 3rd Shift Fill Off Attendants (Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY
Fill completed batches into appropriate containers or onto tanker for shipping purposes, following appropriate procedures for different fill-off methods as indicated on batch ticket.
Seal and apply appropriate labeling to containers as indicated on batch tickets.
Move finished goods to finished goods warehouse for shipping.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate appropriate vat to be filled off per batch ticket instructions
Pre-mix material in vat before filling
Locate appropriate materials (containers, strainers, equipment, etc.) used for filling, as indicated by batch ticket, and in fill-off manuals
Always bond and ground containers before filling
Obtain retain per instructions in fill-off procedures.
Labels retain as directed by QC department
Complete fill-off procedure
Clean vat and equipment using appropriate cleaning solution indicated on batch ticket
Make proper notations on batch ticket regarding fill-off
Apply appropriate labeling as instructed on batch ticket
Move finished goods to warehouse if necessary
Maintain neat and orderly work area
Pay: From $18.00 per hour
Benefits:
401(k)
401(k) matching
Dental insurance
Employee assistance program
Flexible spending account
Health insurance
Life insurance
Paid time off
Retirement plan
Tuition reimbursement
Vision insuranceSchedule:
8 hour shift
Sunday to Thursday
Weekend availabilitySupplemental Pay:
Signing bonusAbility to commute/relocate:
Hudson, NC: Reliably commute or planning to relocate before starting work (Required)Experience:
Basic reading and comprehension skills
Basic math skills
Shift availability:
Night Shift (Preferred)Work Location: In person
All candidates must pass background check and drug test to qualify for employment.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-10-29 14:14:21
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Inbound/Outbound Distribution Clerk is responsible for coordinating and processing the efficient movement of materials and finished goods into and out of the distribution center.
This position supports receiving, shipping, inventory control, and transportation activities by ensuring accurate documentation, timely product flow, and compliance with company procedures and customer service requirements.
The role serves as a key link between warehouse operations, transportation providers, customer service, inventory control, and production teams to ensure products are received, stored, picked, and shipped accurately and on schedule.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Verify receipts against purchase orders, packing slips, bills of lading, and advance shipping notices (ASNs).
Identify, document, and communicate shipment discrepancies, damages, or shortages.
Schedule and monitor inbound docking and unloading activities.
Enter receiving transactions into warehouse management systems (EWM) and ERP systems.
Ensure received materials are properly labeled and routed to designated storage locations.
Fulfill customer orders and shipment releases in accordance with shipping schedules.
Generate shipping documents including bills of lading, packing lists, labels, and carrier paperwork.
Coordinate outbound shipments with carriers, freight providers, and internal departments.
Verify order accuracy, shipment quantities, and routing requirements prior to shipment.
Monitor order status and resolve shipping issues to support customer service levels.
Track and communicate shipment information and delivery schedules.
Maintain accurate inventory transaction records, investigate inventory discrepancies and support cycle count activities.
Ensure timely system updates for receipts, transfers, adjustments, and shipments.
Review reports and transaction data to identify exceptions requiring corrective action.
Coordinate with warehouse personnel regarding receiving priorities and shipping schedules.
Support compliance with safety standards, company policies, and regulatory requirements.
Maintain organized shipping and receiving records.
Assist with continuous improvement initiatives related to warehouse and distribution processes.
Provide administrative support for distribution operations as needed.
EDUCATION REQUIREMENT:
High School Diploma or GED required; Associate degree in Supply Chain, Logistics, Business Administration, or related field preferred.
EXPERIENCE REQUIREMENT:
2+ years of experience in shipping, receiving, warehouse operations, logistics coordination, or distribution support.
Experience working with inventory systems, warehouse management systems (WMS), or ERP systems.
Experience in a high-volume distribution center or manufacturing environment.
Experience coordinating transportation carriers and freight shipments.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, talk, hear, and lift up to 25 lbs.
ADDITIONAL INFORMATION:
Proven knowledge of distribution center and warehouse operations, shipping and receiving processes, inventory control principles and transportation and freight documentation.
Proficiency with Microsoft Office applications, particularly Excel, Warehouse Management Systems (WMS) and ERP applications.
Strong organizational and administrative skills.
Data entry and transaction processing accuracy.
Problem-solving and issue resolution.
Time management and prioritization.
Effective written and verbal communication.
Manage multiple priorities in a fast-paced environment.
Work effectively with warehouse personnel, drivers, carriers, suppliers, and customers.
Analyze and reconcile discrepancies in shipments and inventory transactions.
Maintain attention to detail while meeting operational deadlines.
Adapt to changing business demands and shipping schedules.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Georgia, USA
Posted: 2026-10-29 14:14:18
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB: Tremco CPG is seeking an applicant with a demonstrated knowledge of sealant/coating formulations across multiple chemistries, with a focus on reactive, one component systems and butyl technologies, and would be responsible for all efforts regarding new developmental projects and operational and supply chain support regarding them.
The incumbent in this role will advance projects effectively once given guidance from senior leadership and communicate project updates to assist in tactical decision making regarding the area of their expertise.
They will demonstrate competency regarding adaptability, resourcefulness, collaboration, and accountability to drive projects to completion when working individually or within a group dynamic.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Lead and supervise research projects that deliver business results
Lead multiple project activities through a defined product development process
Oversee the design of experiments to evaluate and optimize the performance attributes of these technologies
Understand process capability, design selection criteria, and/or structure-property relationships for developed products
Assure and validate proper documentation of responsible technical and experimental activities
Present work and subject matter cross-functionally to facilitate discussion with stakeholders
Explores conceptual ideas to prove or disprove concepts
Ability to travel as required up to 10%
EDUCATION REQUIREMENT: Bachelor's or master's degree in chemistry, chemical engineering or polymer science
EXPERIENCE REQUIREMENT: 4+ Years' experience in at least 3 of the following areas
Reactive Chemistries (1 and 2K polyurethanes, hybrids, and silicones)
Formulation and new product development experience
Knowledge of adhesive and sealants market
Technical services and applications testing preferred
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The hourly rate/salary range for applicants in this position generally ranges between $93,350 and $116,688.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2026-10-29 14:14:16
-
JOB DESCRIPTION
Compensation:
Base Compensation Range: $70,000 - $90,000
Uncapped earnings potential - get paid for your performance!
Outside Sales Reps that completed their first year average over $135K, with our top rookies earning over $200K.
Overall, veteran Stonhard Sales Reps average over $230K per year!
20% of our US sales team made over $300,000 per year
Employee Benefits:
Stonhard invests in our people - 401K matching AND a 100% company sponsored pension plan, along with strong medical, dental & vision benefits programs
World-class training and a commitment to ongoing career development and long-term growth
40% of Stonhard's US sales team have been with the company for 10+ years
You'll have flexibility to work from your home office when not in the field meeting clients
Supplemental Pay Types: Commission Pay, Car Allowance, Reimbursement for Business Expenses
Key Responsibilities:
Drive B2B sales growth through in-person sales calls by meeting/exceeding activity goals for quotes and orders
Targeted industries and customers include Federal and Government accounts, building relationships with decision makers through sales calls and bid processes.
Proactively identify new business opportunities (ZoomInfo subscription provided) and implement effective sales solutions quickly
Maintain accurate customer records, project details and activity logs using Salesforce CRM
Oversee project management responsibilities at installation sites, coordinating work with Stonhard's Construction Division approved installation crews (including occasional weekend/holiday installations)
Qualifications:
Two or more years of related sales B2B experience preferred, specializing in federal, government, construction, industrial, or commercial markets
Experience working with the General Services Administration (GSA) Schedule preferred.
Sales experience calling on Federal and Government Accounts
Strong oral and written communication, presentation, organization and planning skills
Ability to thrive in a self-directed and fast-changing environment with a high degree of flexibility
Computer literacy required, including experience with CRM systems (Salesforce, ZoomInfo) and Microsoft 365
Valid driver's license and reliable transportationApply for this ad Online! ....Read more...
Type: Permanent Location: Atlanta, Georgia
Posted: 2026-10-29 14:14:13
-
JOB DESCRIPTION
The Technical Sales Rep ensures that the assigned revenue, margin and product mix objectives, within the corporate business framework, are met or exceeded.
This is to be accomplished by securing, developing, and managing key architects, designers, general contractors, distributors, subcontractors, and end-user accounts.
This position will also own and manage all related performance and service metrics for the assigned accounts for Omaha, NE.
This position is in the Tremco Commercial Sealants and Waterproofing Division covering the Omaha, NE area.
Tremco Sealants manufactures sealants, air barriers, waterproofing membranes, traffic coatings, glazing accessories and more for new construction and restoration.
Our products can be seen on structures from parking garages and mixed-use buildings to single-family homes and high-rises, and are also used in the modular, residential window and door, industrial and manufacturing markets.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Achieves or exceeds assigned sales goals and expectations.
Works primarily with existing accounts, while seeking and developing new account opportunities to influence and increase use of Tremco CPG products in assigned territory.
Manages assigned accounts to establish business development opportunities through account penetration, analysis, partnership with key decision makers, and strategic initiatives.
Drives product specifications and project opportunities throughout assigned territory.
Leverages industry knowledge, marketplace dynamics and key relationships both internally and externally to develop trusted partnerships and advisory relationships with customers with a focus on problem identification, exploration and resolution.
Annually prepares and delivers strategic business/territory plans for each customer with monthly forecasts.
Consistently and efficiently follows the standard sales process to identify prospects and decision makers, gain customer commitment, predict sales probability, and effectively close deals.
Manages day-to-day contact, exchanges information succinctly, truthfully and ethically while addressing issues directly and tactfully in pursuit of mutual interest and benefit.
Develops and delivers technical, high quality and directed digital collateral, product prospectus, presentations, and business correspondence in support of the overall sales process.
Collaborates with senior staff to coordinate and execute product knowledge training sessions with internal and external customers, as appropriate, utilizing supplier representatives.
Leverages all available technology on a daily basis for productivity and effective lead generation, account maintenance, sales and expense tracking, forecasting, account reviews, customer contact, presentations, etc.
Works collaboratively with internal support resources to develop teamwork through cooperation, trust and mutual respect.
Attends and presents business unit products and services at industry conventions and trade shows.
Maintains extensive product knowledge in all product lines and service offerings.
Adheres to and enforces all company policies, pricing, and operational procedures with special attention to the professional image of the company.
Performs other related duties as required, requested or assigned.
EDUCATION
Bachelor's Degree in Business, Sales, Construction Management and 2-3 years of construction or industry experience OR
Minimum High School Diploma or GED with 5 years of construction or industry experience
EXPERIENCE
Two to four years related experience and/or training
Construction knowledge (i.e., waterproofing, air barriers, framing, modular, etc.)
Basic knowledge of product chemistries
OTHER SKILLS AND ABILITIES:
Ability to travelwithin assigned territory.
(Southern New England residency preferred)
Must be well organized,self-motivated, with outstandingwritten and verbalcommunication skills
Proficient with Microsoft Office Suite (Word, Excel, PowerPoint)
Salesforce.com or other CRM software experience preferred
Possess a professional curiosity to figure out how things work or are put together
Ability to retain knowledge and training
Proven ability to understand, use, and manage your own emotions in positive ways to relieve stress, communicate effectively, empathize with others, overcome challenges and diffuse conflict.
Demonstrates self-awareness and emotional self-control through adaptability, achievement orientation, and a positive outlook.
Accepts and utilizes feedback effectively.
Reads an audience and adjust style and approach accordingly.
Excellent written and verbal communication skills
Strong presentations skills
Excellent interpersonal and organizational skills
Ability to build relationships and deliver exceptional customer service.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, kneel, talk, hear, and lift up to 25 lbs.
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally starts at $90,000 and goes up based on experience.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran statusApply for this ad Online! ....Read more...
Type: Permanent Location: Omaha, Nebraska
Posted: 2026-10-29 14:14:12
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 3rd Shift Fill Off Attendants (Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY
Fill completed batches into appropriate containers or onto tanker for shipping purposes, following appropriate procedures for different fill-off methods as indicated on batch ticket.
Seal and apply appropriate labeling to containers as indicated on batch tickets.
Move finished goods to finished goods warehouse for shipping.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate appropriate vat to be filled off per batch ticket instructions
Pre-mix material in vat before filling
Locate appropriate materials (containers, strainers, equipment, etc.) used for filling, as indicated by batch ticket, and in fill-off manuals
Always bond and ground containers before filling
Obtain retain per instructions in fill-off procedures.
Labels retain as directed by QC department
Complete fill-off procedure
Clean vat and equipment using appropriate cleaning solution indicated on batch ticket
Make proper notations on batch ticket regarding fill-off
Apply appropriate labeling as instructed on batch ticket
Move finished goods to warehouse if necessary
Maintain neat and orderly work area
Pay: From $18.00 per hour
Benefits:
401(k)
401(k) matching
Dental insurance
Employee assistance program
Flexible spending account
Health insurance
Life insurance
Paid time off
Retirement plan
Tuition reimbursement
Vision insuranceSchedule:
8 hour shift
Sunday to Thursday
Weekend availabilitySupplemental Pay:
Signing bonusAbility to commute/relocate:
Hudson, NC: Reliably commute or planning to relocate before starting work (Required)Experience:
Basic reading and comprehension skills
Basic math skills
Shift availability:
Night Shift (Preferred)Work Location: In person
All candidates must pass background check and drug test to qualify for employment.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-10-29 14:14:10
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for 2nd Shift QC Technician (Shift Differential).
$1,000 Sign-On Bonus!
GENERAL SUMMARY: Assists with application and monitoring of established quality procedures and methods for production batches and new raw materials.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and communicates variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects in D365.
Expedites and follows up changes to allow for prescribed quality standards.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Check production batches by comparison to standards
Advise batchmaker of any necessary adjustments to apply to product batch
Recheck batch after adjustments are made until product is within standard product specifications
Use proper analytical tools to compare product to standard specifications and to wet and/or dry samples
Record results of comparison in D365
Consult with QC manager on products more than 10% out of product specifications
Upon approval of product record data in D365
Check bulk raw materials against standard product specifications upon receipt
Consult Quality control manual for specific requirements for product analysis of production batches as well as raw materials
Calibrate QC/QA equipment as required
Other duties as assigned by supervisor/manager
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
High school diploma
Proficient math and written communication skills
Good computer skills - knowledge of Excel required
Up to three years in industry related QC field helpful
Prior batchmaking experience helpful
Specific Knowledge, Skills, and Abilities Required
Successful completion of Munsel Color test, helpful
Familiarity with products used in batchmaking processes
Familiarity with standard analytical tools
Reasoning Ability
Employee must work with limited supervision following written and verbal instructions.
CERTIFICATES, LICENSES, REGISTRATIONS: N/A
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions.
Occasional lifting and/or carrying of up to 40 lbs.
Is required.
Standing for extended periods of time (approximately 90% of 8-hour shift) is required with some sitting, walking, reaching, handling, bending and stooping.
WORK ENVIRONMENT: Normal laboratory industry related environment conditions are present in the QC/QA laboratory.
Employee on occasion will be required to go into the manufacturing areas, where normal manufacturing environment conditions are present.
The company provides any required personal protective equipment.
KEY PERFORMANCE INDICATORS (KPI)
Turnover of correct production batches
QC efficiency as gauged by customer RMA'sApply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-10-29 14:14:07
-
JOB DESCRIPTION
RPM Industrial Coatings Group in Hudson, NC is looking for Filling Line Operators.
GENERAL SUMMARY
Responsible for filling production batches into aerosol containers as indicated on batch tickets.
Performs routine maintenance and makes mechanical or electrical adjustments or repairs to production line machines as needed.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Locate proper product and filling items such as cans, lids, labels, etc.
to fill aerosol containers per batch ticket instructions. Set up all equipment on filling line and make changeovers for filling new batch ticket orders. Review finished order for final counts on product and fill rates. Maintain neat and orderly work area. Pay: From $18.00 per hour Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Flexible spending account Health insurance Life insurance Paid time off Retirement plan Tuition reimbursement Vision insurance Schedule: 8 hour shift Monday to Friday Weekend availability Supplemental Pay: Signing bonus Ability to commute/relocate: Hudson, NC: Reliably commute or planning to relocate before starting work (Required) Experience: No experience necessary Fill off experience preferred Shift availability: Day Shift (Preferred) Night Shift (Preferred) Work Location: In person All candidates must pass background check and drug test to qualify for employment.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-10-29 14:14:06
