-
Repairs & Test Engineer - London - circa £40 per hour Umbrella - Contract (min 6 Months, Rolling)
About the Role
We are seeking a skilled Repairs & Test Engineer to join a Manufacturing team on an initial 6-month rolling contract, with strong potential for extension.
This hands-on, lab-based role is key to maintaining manufacturing throughput through diagnosis, fault-finding and component-level repair of power transmission equipment and customer returns.
You will work closely with Manufacturing, Quality, Industrial Engineering and R&D teams to support testing, repair and continuous improvement activities.
Purpose of the Role
To support manufacturing and customer service operations by:
Repairing production failures and customer-returned power transmission equipment
Performing component-level diagnostics and root cause analysis
Supporting manufacturing test systems and engineering improvements
Ensuring product quality and reliability standards are consistently maintained
Key Responsibilities
Repair and fault-find customer-returned and production-failed power transmission equipment to component level.
Diagnose faults using schematics, datasheets, and technical documentation.
Conduct root cause analysis on product and field failures.
Use test equipment (oscilloscopes, multimeters, etc.) to verify faults and repairs.
Perform PCB-level soldering and rework (SMT and through-hole).
Support and maintain manufacturing test stations and equipment.
Record repairs and failure data in the ERP system.
Support continuous improvement through engineering and quality feedback.
Technical Requirements
The successful candidate will demonstrate strong hands-on electronics capability, including:
Strong component-level diagnostics (resistors, capacitors, ICs, etc.)
Confident ability to interpret complex schematics, datasheets and technical drawings
Experience using standard test equipment including oscilloscopes, multimeters etc.
Skilled in soldering, desoldering and PCB rework, including SMT and through-hole
Ability to safely test, verify and validate repaired electronic assemblies
Experience working with board-level electronics in an industrial environment
Experience & Qualifications
HND or Degree in Electronics Engineering (or equivalent qualification with relevant experience)
Minimum 3+ years' experience in electronics repair, test or fault-finding roles
Proven experience working with electronic schematics and circuit diagnostics
Industrial or manufacturing electronics experience (not consumer electronics)
Apply now by submitting your CV for review.
....Read more...
Type: Contract Location: Greenwich, England
Salary / Rate: £40 - £45 per hour + Umbrella
Posted: 2026-06-04 14:41:12
-
Production Supervisor
£32 to 35k
Progression and career development
Good Benefits
Ready to lead from the front in a fast-paced, tech-driven environment?
We're looking for a hands-on Production Supervisor to take ownership of daily operations, drive team performance, and keep everything running like clockwork.
If you've got a strong technical mindset and know how to get the best out of people, this could be your next move.
What you'll be doing:
- Leading, motivating, and developing a production team
- Planning workloads and ensuring targets are met efficiently
- Keeping operations commercially focused - balancing quality, cost, and output
- Using Excel, ERP systems and data to track performance and improve processes
- Troubleshooting and supporting technical issues where needed
What we're looking for:
- Proven team leadership experience - you know how to manage and inspire
- Strong planning and organisational skills
- Commercial awareness - you understand SLA V's the bigger picture
- Confident with Excel and IT systems
- A technical mindset
- Fast learner
Why join?
- Competitive salary of £32k-£35k
- Opportunity to step into a key leadership role
- Growing, dynamic environment where your impact will be visible
If you're a natural leader with a technical edge and a drive to deliver results, we want to hear from you.
At KHR we take care to ensure that you are represented as well as possible so it is worth checking your CV for layout, spelling and grammar as well as making sure it is up to date before you submit.
If you feel you need to highlight particular qualifications, skills or relevant experience with regards to a specific role then please add a cover letter or a preface page.
This does not need to be formatted in the same manner.
In addition, if your CV is heavy with graphics etc, please could you also submit a "clean" copy in Word.
Thank you.
KH Recruitment Ltd is acting as an Employment Agency in relation to this vacancy.
KHR - Recruitment Specialists is a trading name of KH Recruitment Ltd Keep in touch with us online for job alerts, industry updates and market...
....Read more...
Type: Permanent Location: Borough Green, England
Start: 27/06/2026
Duration: Permanent
Salary / Rate: £32000 - £35000 per annum + + Benefits
Posted: 2026-06-04 09:59:03
-
Metal Fabrication Machine Operator required to join an existing workshop team working on heavy machinery build and repair.
The successful candidate will have knowledge of manufacturing machine operation and maintenance, metal fabrication and CNC machining.
Responsibilities
Fault Finding and Repair or electrical machines.
Manual and sophisticated CNC machinery operation.
Wiring, crimping and electrical assembly.
Maintenance and preventative maintenance, cleaning, testing, and troubleshooting.
Type: Permanent Location: Liverpool, England
Start: ASAP
Duration: Permanent
Salary / Rate: £38000 - £55000 Per Annum None
Posted: 2026-06-04 09:44:54
-
Time served manual machinists with lathe, boring machine and milling experience required to join an existing workshop team manufacturing heavy machinery for rotating systems build and repair.
The successful candidate will have ideally an apprenticeship using manual lathes, boring and milling machines.
Responsibilities
Manual machine operation.
Fault Finding and Repair or electrical machines.
Wiring, crimping and electrical assembly.
Maintenance and preventative maintenance, cleaning, testing, and troubleshooting. ....Read more...
Type: Permanent Location: Liverpool, England
Start: ASAP
Duration: Permanent
Salary / Rate: £38000 - £55000 Per Annum None
Posted: 2026-06-04 09:44:50
-
Redline has been retained by a leading instrumentation manufacturer who are looking for a Lead Electronics Design Engineer to join their R&D team based in Surrey.
Due to significant growth, they are seeking a Lead Electronics Design Engineer to be responsible for the design and development of analogue and digital circuit design across new and existing products, going into a variety of regulated industries.
You will be involved with PCB design, prototyping, test and validation and software interface.
The nature of the industry and products will require someone who is a British Citizen.
Key skills and experience for Lead Electronics Design Engineer, based in Surrey:
Proven experience within a hands-on electronics design role
Mixed signal design within a regulated industry i.e.
Defence, Aerospace, Medical, Automotive etc.
Experience in sensor design
Experience within a lead / mentor role, supporting and leading junior engineers
Degree qualified in a related Electronics discipline
Firmware / embedded knowledge
Excellent verbal and written communication skills
This is an exciting opportunity to join a growing company who can offer the opportunity for career progression and personal development.
....Read more...
Type: Permanent Location: Surrey, England
Start: ASAP
Salary / Rate: £35000 - £55000 per annum
Posted: 2026-06-04 08:10:55
-
A highly skilled Electronics Design Engineer Job has come up to join my client who is a global leader in developing embedded computing, based in Northamptonshire.
With a high investment in research and development, several on-going projects and substantial growth, my client are looking to recruit a Electronics Design Engineer to join their R&D department.
This Electronics Design Engineer Job will be responsible for technical and project leadership and the leading of a cross-functional team of engineers working on the development of high-performance Graphic Cards, Sensor Processing products and Network Switches.
The successful applicant with be happy to embrace a culture of outstanding team work as well as the ability to work under own direction.
This Electronics Design Engineer Job will have extensive skills in Hardware development and be a good influencer and communicator.
Self-motivation and good organisation are essential.
Ideal candidates for the Electronics Design Engineer job based in Northamptonshire will have design and development experience in the following areas:
Designing high speed digital circuits that utilise the latest FPGA, Microprocessor and high-speed interconnect technologies.
Schematic Capture using Altium.
Integrating in-house designs with COTS modules (power supplies, single board computers, RF interfaces).
The successful candidate for this Electronics Design Engineer job will have:
A degree educated in Electronic Engineering or similar subjects with provable practical design experience, ideally in an aerospace or defence company
Working knowledge of serial interfaces i.E.
RS485, RS422, MLVDS.
Mixed signal knowledge using ADC/DAC, FPGA, SoC based design for high performance signal processing, communications and control.
This is a fantastic opportunity to join a well-established, highly profitable company investing heavily in R&D.
If you would like further information on the Electronics Design Engineer Job opportunity, based in Northamptonshire, please send an up to date CV to rwilcocks@RedlineGroup.Com or call Ricky Wilcocks on 01582 878810. ....Read more...
Type: Permanent Location: Northamptonshire, England
Start: ASAP
Posted: 2026-06-03 23:00:05
-
An exciting job opportunity has arisen for an Engineering Manager based in Norfolk to join a market leader involved within an exciting technology sector providing bespoke software, test tools and technology that will support customers today and in the future.
The Engineering Manager, Norfolk, will be expected to develop and lead multi-disciplinary engineering teams, learning from senior leadership while driving best practice across project, design, and delivery functions.
This may include mechanical, electronic, electro-mechanical, integration, and software engineering, as well as overseeing design compliance, project management, and team development.
Responsibilities include:
Manage and structure multi-disciplinary engineering teams to deliver high-quality technical solutions across customer projects.
Lead and oversee multiple concurrent engineering projects from customer engagement through R&D, design, manufacture, and delivery.
Provide subject matter expertise across mechanical, electrical, electronic, and software engineering, ensuring designs are optimised for reliability, manufacturability, and compliance.
Ensure smooth New Product Introduction (NPI) handovers to production, including build instructions, training, and ongoing support.
Mentor, coach, and develop staff, creating a high-performing, motivated, and engaged engineering team.
Key skills & experience:
Proven leadership and management experience in multi-disciplinary engineering teams(mechanical, electronic, electro-mechanical, integration, and software).
Experience in project-driven, customer-led environments, delivering complex, high-reliability solutions.
Track record of taking products from customer engagement through R&D, manufacture, and delivery.
Ability to implement and manage department structures, processes, and standards within a growing, ambitious organisation.
Strategic thinker with the ability to drive process improvements, team development, and business growth.
Hands-on approach with experience working closely with engineering teams during probation and beyond.
This is a fantastic job opportunity to join a well-established, successful Norfolk based company who are investing very heavily in R&D.
To find out more about Engineering Manager job or other potential jobs we currently have at the moment, please contact Ricky Wilcocks on 01582 878810 or kindly email your most up to date CV and covering letter to RWilcocks@redlinegroup.Com ....Read more...
Type: Permanent Location: Norfolk, England
Start: ASAP
Salary / Rate: £38000 - £90000 per annum
Posted: 2026-06-03 23:00:05
-
Power Supply Design Engineer - West Yorkshire
An exciting opportunity has arisen with a leading UK engineering manufacturer specialising in electrical connection systems and power solutions for the rail, aerospace and industrial sectors, who are looking to appoint a Power Supply Design Engineer to play a key role in the development of high-reliability power electronics for critical rail applications based from their offices in West Yorkshire
This well-established engineering business designs and manufactures specialist electrical systems used in demanding and safety-critical environments.
As part of its continued growth, the company is seeking an experienced engineer to take ownership of switch mode power supply (SMPS) design activities, supporting innovative lighting and control systems used within rolling stock applications.
As a Power Supply Design Engineer, you will be responsible for the full design lifecycle of robust, high-reliability power supplies, from concept and architecture development through to testing, validation and production support.
This is a hands-on technical role offering the opportunity to become a key contributor within the organisation's power electronics capability.
Key responsibilities for the Power Supply Design Engineer based in West Yorkshire include:
Design and develop high-reliability SMPS power supplies (typically 400W-500W) for rail applications.
Develop power solutions for lighting systems and control electronics used within rolling stock.
Translate customer and system requirements into power supply architectures, schematics and detailed designs.
Select key power electronics components including magnetics, switching devices, controllers and protection circuits.
Optimise designs for efficiency, thermal performance, reliability and manufacturability.
Perform electrical, thermal and EMC simulations and analysis.
Build, test and validate prototypes, carrying out verification and compliance activities.
Troubleshoot design issues and resolve performance challenges throughout the product lifecycle.
Ensure designs meet rail industry standards, safety requirements and environmental constraints.
Address EMC/EMI performance, thermal management and mechanical robustness requirements including shock and vibration.
Collaborate closely with Mechanical Design, Manufacturing, Test and Project teams to ensure successful product delivery.
Support products from concept through to production, including manufacturing support, field issue resolution and continuous improvement activities.
Key skills required for the Power Supply Design Engineer based in West Yorkshire include:
Degree qualified in Electrical or Electronic Engineering or equivalent.
Proven experience as a Power Electronics or SMPS Design Engineer.
Strong background in the design of 400W+ power supplies, ideally around 500W.
Experience designing products for harsh, industrial or safety-critical environments.
Strong knowledge of AC-DC and DC-DC converter topologies.
Experience with power electronics components including MOSFETs, IGBTs and magnetic components.
Knowledge of simulation tools such as SPICE, MATLAB/Simulink or equivalent.
Understanding of thermal design, EMC mitigation and compliance requirements.
Familiarity with PCB layout considerations for power electronics applications.
Desirable experience:
Experience within the rail industry, particularly rolling stock systems, lighting systems or control electronics.
Knowledge of rail-related EN and IEC standards.
Experience working within safety-critical engineering environments.
Background in low-volume, high-reliability product development.
Working environment and opportunities:
Opportunity to take ownership of a key technical discipline within the business.
Work on bespoke, high-reliability engineering solutions rather than high-volume consumer products.
Direct involvement in products that support critical rail infrastructure and passenger systems.
Collaborative engineering environment working alongside design, manufacturing and project teams.
Opportunity to influence future product development and power electronics capability across the organisation.
This position would suit an experienced Power Supply Design Engineer looking to play a pivotal role in the development of advanced SMPS solutions for harsh rail environments, while taking ownership of a critical technical capability within a highly respected engineering business.
To apply please send your CV to clam@redlinegroup.Com, or for more information contact Chuck Lam on 01582 878868. ....Read more...
Type: Permanent Location: West Yorkshire, England
Start: ASAP
Salary / Rate: £70000 - £80000 per annum
Posted: 2026-06-03 13:02:16
-
Industrialisation Test Engineer - LabVIEW & Test Bench Development
London | £55,000 - £60,000 + Bonus + Excellent Benefits | Permanent
The Role
We are seeking an Industrialisation Test Engineer with proven experience designing and developing automated test benches for electronic and electromechanical products.
This is a hands-on role focused on the design, development, integration and support of production test systems.
You'll take ownership of both the hardware and software elements of automated test equipment, developing robust test solutions using LabVIEW and TestStand to support new product introduction and manufacturing.
Key Responsibilities
Design and develop automated test benches, including hardware and software architecture.
Develop and maintain test applications using NI LabVIEW and TestStand.
Design test fixtures and validation systems for manufacturing environments.
Install, commission and support production test equipment.
Work closely with R&D and Manufacturing teams to industrialise new products.
Diagnose and resolve hardware and software test issues.
Produce test specifications, procedures and validation documentation.
Support NPI, continuous improvement and manufacturing test activities.
Requirements
Degree qualified in Electronics, Electrical Engineering, High Voltage Engineering or a related discipline.
Proven experience developing automated test systems within a manufacturing environment.
Strong experience designing both hardware and software test benches.
Advanced LabVIEW skills and experience with NI TestStand.
Experience of instrumentation, control systems and automated testing.
Strong fault-finding and problem-solving skills.
Experience of high-voltage, power electronics or electrical testing would be advantageous.
What's on Offer?
Technical ownership of sophisticated automated test systems.
A key role in the development of next-generation production test benches.
Competitive salary, bonus and excellent benefits package.
Apply now by submitting your CV for review.
....Read more...
Type: Permanent Location: Greenwich, England
Salary / Rate: £55000 - £60000 per annum + + Bonus + Ex. Benefits
Posted: 2026-06-03 10:52:31
-
Test Engineer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: PCB, Testing, Electronics
Our Client:Is a pioneering family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We are seeking a skilled Test Engineer to join our client's team, who is responsible for developing test requirements, creating test instructions, and testing PCBs, assemblies, and systems.
The ideal candidate will have a strong background in electronics and measurement technology, with practical experience in handling measuring equipment and a good understanding of radio frequency and power engineering.
Main Responsabilities:
Development of test requirements and new test methods in collaboration with the development department
Creation of test instructions and test reports
Testing, repairing (requires e.g.
soldering skills) and commissioning of PCB's, assemblies and systems as well as participation in tests in the test field
Checking production orders and goods receipt material according to quality characteristics
Perform factory inspections with customers
Management of measuring equipment storage
Construction of test facilities for the rationalization of test procedures
Required Competencies:
Completed technical training in the direction of electronics/measurement technology, technician school, an advantage
Practical experience in handling measuring equipment
Knowledge of radio frequency and power engineering is an advantage
Excellent knowledge of German and English
Positive attitude to work
Reliable team player with a pronounced quality awareness
Enjoy working independently
Benefits:
Competitive salary and benefits package - Up to CHF 110k
Opportunity to work on exciting and challenging projects
Collaborative and dynamic work environment
Professional development and training opportunities
Comprehensive benefits package, including health insurance, retirement plan, and more
Flexible working hours and remote work options
30 Days Annual Leave
Location: Aargau, Baden, SwitzerlandSalary: CHF 80-110k + Bonus Benefits
Tech Stack: PCB, Testing & Electronics
Applicants for the Test Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/TESARG80110 ....Read more...
Type: Permanent Location: Baden, Switzerland
Start: ASAP
Salary / Rate: Swiss Franc80000 - Swiss Franc110000 per annum
Posted: 2026-06-03 01:07:02
-
Electrical Engineer/Designer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: Zuken E3 or E-PLAN P8
Our Client:Is a pioneering family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We seek an experienced Electrical Design Engineer or Elektroplaner with Zuken E3 or E-Plan expertise to join our team.
The successful candidate will be responsible for developing schematic drawings and Bills of Materials (BOMs) for complete systems.
This role's primary focus will be creating high-quality schematic drawings and BOMs with a good understanding of the Low Voltage Directive.
Requirements:
Higher Technical School Qualification or Apprenticeship in Electrical Engineering
4+ years of experience in electrical design engineering
Strong understanding of electrical design principles, including circuit analysis and design
Proficiency in Zuken E3 or E-PLAN, with expertise in creating schematic drawings and BOMs
Knowledge of the Low Voltage Directive and relevant electrical safety standards
Excellent communication and collaboration skills
Ability to work independently and as part of a team
Strong problem-solving and analytical skills
Familiarity with design automation tools and methodologies
Nice to Have:
Bachelor's or Master's degree in Electrical Engineering or a related field
Experience with PCB design and layout
Knowledge of electrical testing and validation procedures
Familiarity with industry-standard design tools and software
Certification in electrical engineering or a related field
Benefits:
Competitive salary and benefits package - Up to CHF 120k
Opportunity to work on exciting and challenging projects
Collaborative and dynamic work environment
Professional development and training opportunities
Comprehensive benefits package, including health insurance, retirement plan, and more
Flexible working hours and remote work options
30 Days Annual Leave
Location: Aargau, Baden, SwitzerlandSalary: CHF 100 -130k + Bonus Benefits
Tech Stack: Zuken E3, E-PLAN, PCB
Applicants for the Senior Software Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/EDARG100120 ....Read more...
Type: Permanent Location: Baden, Switzerland
Start: ASAP
Salary / Rate: Swiss Franc90000 - Swiss Franc130000 per annum
Posted: 2026-06-03 01:06:55
-
Test technician with good all round precision engineering mechanical test validation and verification experience required to join a comprehensive in house test facility.
Component, product, mechanical testing, assembly and disassembly experience ideally with test equipment maintenance, calibration, environmental screening, modification, troubleshooting and repair skills will be put to great use in this role.
Previous experience in a mechanical apprenticeship, ONC or HNC in engineering, NVQ or C&G level 3 in mechanical engineering is required ideally with.
Proficient in the use of measurement equipment such as micrometres, megohmmeter, gauges etc .
Advantageous to have industry experience with tools ideally in Well Intervention ....Read more...
Type: Contract Location: Aberdeen, Scotland
Start: ASAP
Duration: Permanent
Salary / Rate: £17 - £26 Per Annum None
Posted: 2026-06-03 00:00:39
-
Technician required with electrical assembly experience and IPC certification.
Key skills
Soldering, crimping and general wiring skills.
Ability to apply basic arithmetic operations, compute ratio and rate, percentage, fractions and ratios, and calculate weights and measures, including Imperial to Metric conversions.
Electronics precision engineering workmanship practices.
Role will be to perform all Electronic Assembler duties under zero supervision.
Following routings and records test measurements on PC based systems.
Specifically to build and tests various components of a complex downhole drilling tools.
....Read more...
Type: Permanent Location: Strouod, England
Start: ASAP
Duration: Permanent
Salary / Rate: £27000 - £36000 Per Annum None
Posted: 2026-06-02 23:12:25
-
Contract - Outside IR35, £40-£50 p/h, 6-Month initial contractWith a workforce of over 500 employees across four state-of-the-art facilities in Europe and North America, this dynamic engineering group delivers comprehensive, end-to-end solutions—from concept design and manufacturing to installation, commissioning, and aftercare.Serving a diverse client base across sectors such as Online Retail & Distribution, FMCG, Life Sciences, and Automotive, this company is renowned for its technical expertise and customer-centric approach.
Following a series of strategic developments, the organisation is now entering a significant phase of accelerated growth and seeking an experience Controls Engineer to bolster the growth.This employer is based in WAKEFIELD, under 10 minutes from the M1 motorway, meaning the successful Controls Engineer will easily be able to commute from surrounding towns & cities including Leeds, Dewsbury, Pontefract, Castleford, Huddersfield, Barnsley, Sheffield and Halifax.Key responsibilities of the Controls Engineer will include:
Design, develop, and deliver PLC, HMI, and SCADA control system solutions aligned to defined project outcomes
Produce and maintain technical documentation including functional design specifications, system architectures, and wiring diagrams
Take ownership of end-to-end project deliverables, from development through to testing, commissioning, and handover
Collaborate with internal teams, suppliers, and stakeholders to ensure successful delivery of agreed milestones
Conduct system testing, including FAT and SAT, ensuring compliance with industry standards and safety requirements
Diagnose and resolve technical issues across control systems, software, and communications during delivery phases
Provide structured training and documentation to support system handover, with support services defined separately from core delivery
Benefits:
Between £40 to £50 per hour
Outside IR35
6-Month initial contract (potential for extension)
For the Controls Engineer opportunity, we are keen to receive CV's from candidates who possess:
Proven experience in PLC programming across platforms such as Allen Bradley, Siemens, Beckhoff, and Schneider, including advanced motion control applications
Strong background in HMI and SCADA development using tools such as FactoryTalk Optix and Siemens HMI Unified
Practical experience integrating and supporting industrial robotic systems (e.g.
ABB, Fanuc, Staubli) within automated environments
Hands-on knowledge of machine vision systems, including implementation and troubleshooting using Cognex and Keyence technologies
Solid understanding of industrial communication networks and machinery safety systems, including risk assessment, design, and compliance with relevant standards
To apply for the Controls Engineer position, please click “Apply Now” and attach a copy of your updated CV.
Alternatively, please contact Alex Feather at E3 Recruitment for more information ....Read more...
Type: Contract Location: Wakefield, England
Start: ASAP
Salary / Rate: £40 - £50 per hour
Posted: 2026-06-02 07:46:44
-
AV Rack Builder - I have new requirement for someone that can bring at least 5 years or rack building skills to the party.
Candidates that have either worked building racks in the residential, corporate / commercial or the pro-audio broadcast arena will be considered.
Due to the nature of the role you will need to be able to travel overseas to build racks on site as well as work in the companies AV rack workshop.
If you have skills regarding test & commissioning of racks then please make this clear within your CV.
You must be able to demonstrate exceptional hands on skills and be able to fully read wiring diagrams / schematics for the desired racks.
As part of the interview process you will be assigned a technical test in the workshop, if you also have photos of previous racks built these will need to be supplied.
AV A-V A/V AUDIOVIUSAL AUDIO-VISUAL AUDIO/VISUAL LIGHTING CI CEDIA CUSTOM INSTALLATION INTEGRATION SOLDER CRIMP TERMINATE TECHNICAL CEDIA SMARTHOME RACK LUTRON PROGRAMM COMMISSION HERTS HERTFORDSHIRE CAMBS CAMBRIDGESHIRE ANGLIA ESSEX
YOU MUST BE LIVING IN THE UK AND ALLOWED TO WORK HERE LEGALLY AND SHOW A CLEARLY DEFINED SKILL SET WITHIN THE CV
....Read more...
Type: Permanent Location: Hertfordshire, England
Salary / Rate: £35000 - £45000 per annum
Posted: 2026-06-02 07:00:15
-
Great opportunity for a highly skilled Senior Electronics Design Engineer to develop, design, and test advanced electronic modules and PCB systems for innovative electronic products.
This role is ideal for experienced electronics professional with strong expertise in analog design, digital design, FPGA development, embedded systems, and mixed-signal simulation.
You will play a key role in taking concepts from initial design through prototyping, verification, and into high-volume production, ensuring robust, high-quality electronic systems
Key responsibilities for the Senior Electronics Design Engineer role based in Egham:
Design and develop analogue and digital circuits, selecting components based on product requirements
Create detailed circuit schematics and PCB designs
Develop and test prototype boards to validate performance
Perform mixed-signal simulation, analysis, and fault finding
Work with high-speed communication protocols including SPI, UART, I2C, USB, and Ethernet
Develop and support FPGA designs and embedded microcontroller systems
Generate comprehensive documentation including test plans, reports, BOMs, and production test documentation
Support verification, validation, and production testing activities
Troubleshoot technical issues and support engineering change management
Collaborate closely with engineering, production, and purchasing teams
Contribute to continuous improvement and knowledge sharing within the team
Key skills required for the Senior Electronics Design Engineer role based in Egham:
Strong expertise in analog electronics (amplifiers, filters, power electronics)
Advanced knowledge of digital electronics, timers, counters, ADCs, and FPGAs
Experience with embedded systems and microcontroller programming
Proficiency in circuit simulation, PCB layout, and prototyping
Experience using PCB design tools such as Altium
Strong analytical, problem-solving, and troubleshooting skills
Bachelor's degree in Electronics, Electrical Engineering, or related field
You will be instrumental in delivering reliable, high-performance electronic systems that meet production and customer requirements.
Your work will directly support successful product launches and ongoing manufacturing excellence.
APPLY NOW! To apply for the Senior Electronics Design Engineer role covering based in Egham, please send your CV to mbelmar@redlinegroup.Com, or for more information contact Mike Belmar on 01582 878807. ....Read more...
Type: Permanent Location: Egham, England
Start: ASAP
Salary / Rate: £65000 - £80000 per annum
Posted: 2026-06-01 15:35:50
-
Lead AV Installation Engineer / Lutron Programmer - I have a new position for a leading light in London that specialise in the world of high end residential AV Installation.
They are now looking for a true master in the fine art of custom av installation.
You will need to have a min of 4 years experience in this specific AV market.
The role will see you working on projects in London and the surrounding home counties.
The clients offer a good career and relevant AV training to further develop your skills and knowledge.
As a lead engineer you will be expected to be a figure on site that can take control of other engineers and trades to make sure the project is delivered on time and on budget.
You will have previous experience of the installation / configuration / commissioning of Crestron or Control4 or Savant AV control systems.
If you have the skills and experiences that fulfil the above then please send me your full CV asap.
AV A/V A-V AUDIOVISUAL AUDIO-VISUAL AUDIO/VISUAL VIDEO CRESTRON DM NVX LUTRON CONTROL4 CEDIA SAVANT AUTOMATION RESIDENTIAL BESPOKE MDUs PROGRAMMING CONFIGURATION HOME NETWORK LONDON SURREY KENT SUSSEX ....Read more...
Type: Permanent Location: South London, England
Salary / Rate: £40000 - £50000 per annum
Posted: 2026-06-01 08:42:55
-
Lead Electronics Engineer - East Sussex
Do you strive to be part of an organisation that develops cutting edge technologies for companies such as Samsung and Intel?
If so I'd like to speak with you!
A highly exciting Lead Electronics Engineer job has arisen with a market leading, global organisation.
The Lead Electronics Engineer will join a Multi-billion organisation, offering fantastic internal career development opportunities and is based in East Sussex.
My client is a world leader in the design and manufacturer of vacuum products and abatement solutions.
As a market leader, their products are integral to manufacturing processes for the semiconductors industry and industries alike.
The successful Lead Electronics Engineer will have the following experience:
- A BSc or MSc in Engineering (or relevant discipline)
- Mixed Signal Design Experience (Digital/Analogue)
- Familiarity with Schematic Capture using OrCAD, Altium or similar tool (Advantageous)
- Previous experience in Micro-Controller/Microprocessor based products
- Previous Experience in Drives.
- Experience with Power Electronics
This is a Golden opportunity for a Lead Electronics Engineer Job, to lead a small team and join a rewarding a fast paced R&D Environment, with opportunities to develop and progress.
This opportunity offers very good benefits.
APPLY NOW or for more information on the Lead Electronics Engineer job please email Ricky Wilcocks with your CV at rwilcocks@redlinegroup.Com or alternatively call 01582 878810. ....Read more...
Type: Permanent Location: East Sussex, England
Start: ASAP
Salary / Rate: £50000 - £65000 per annum
Posted: 2026-06-01 07:29:32
-
Are you looking for a new challenge?
Do you strive to be part of an organisation that develops cutting edge technologies for companies such as Samsung and Intel?
If so I'd like to speak with you!
A highly exciting Senior Electronics Engineer position has arisen with a market leading, global organisation.
The Senior Electronics Engineer will join a Multi-billion organisation, offering fantastic internal career development opportunities and is based in Eastbourne.
My client is a world leader in the design and manufacturer of vacuum products and abatement solutions.
As a market leader, their products are integral to manufacturing processes for the semiconductors industry and industries alike.
The successful Senior Electronics Engineer will have the following experience:
- A BSc or MSc in Engineering (or relevant discipline)
- Mixed Signal Design Experience (Digital/Analogue)
- Familiarity with Schematic Capture using OrCAD, Altium or similar tool (Advantageous)
- Located within a reasonable commute (E.G.
Eastbourne, Brighton, Bexhill, Hastings etc…)
- Previous experience in Micro-Controller/Microprocessor based products
- Previous Experience in Communication Protocols (CAN, Ethernet, Wi-Fi, Profibus etc…)
This is a Golden opportunity for a Senior Electronics Engineer Job, to join a rewarding a fast paced R&D Environment, with opportunities to develop and progress.
APPLY NOW or for more information on the Senior Electronics Engineer job please email Ricky Wilcocks with your CV at rwilcocks@Redlinegroup.Com or alternatively call 01582 878810 ....Read more...
Type: Permanent Location: East Sussex, England
Start: ASAP
Salary / Rate: £45000 - £55000 per annum
Posted: 2026-06-01 07:26:04
-
Equipment Engineer urgently required for a global leading Semiconductor Manufacturing company.
A great opportunity for an Equipment Engineer to join my client, based in Oldham, Manchester who are looking to expand their equipment engineering team.
The job is based on a rotating day and night shift pattern (Continental) of 4 on 4 off 12 hours shifts so the candidate must be prepared to work shifts for this role and in a cleanroom environment.
Responsibilities of the Equipment Engineer based in the Oldham, Manchester area include maintaining, repairing and improving semiconductor wafer processing equipment.
In addition to this you will be diagnosing the root cause of equipment issues, dealing with equipment breakdowns and performing maintenance task and risk assessments.
To be successful in your application for the Equipment Engineer job, you will need to have previous experience working directly the semiconductor sector.
You will need to have a strong background across Electrical, Electronic and Mechanical Engineering disciplines.
You will also be educated to minimum HNC/HND level in a relevant engineering based discipline and have the ability to fault find to electronic component level.
Apply Now, if this Equipment Engineer job in Oldham, Manchester sounds like the opportunity for you, click the APPLY NOW button, or alternatively call Tom Drew on 01582 878 848 or email TDrew@redlinegroup.Com quoting THD1361.
Alternatively, if this job is not suitable but you are looking for a job within Manufacturing and Operations, please call 01582 878 848 for a confidential discussion. ....Read more...
Type: Permanent Location: Oldham, England
Start: ASAP
Posted: 2026-05-29 08:00:44
-
Electronics Engineer
Redline is working with a leading battery design and manufacturing company who are looking for an Electronics Engineer to join their engineering team based in Thurso, Scotland.
Due to continued growth, they are seeking an Electronics Engineer to be responsible for the design, development, testing and validation of advanced electronic systems, with a particular focus on battery management systems, power electronics and embedded control solutions across a range of high-reliability industries.
You will be involved with analogue and digital circuit design, PCB layout, prototyping, testing and system integration.
The nature of the industry and products will require someone with experience working within regulated or safety-critical environments.
Key skills and experience for Electronics Engineer, based in Thurso:
Proven experience within an electronics engineering role
Electronic design experience including analogue, digital or power electronics
Degree qualified in Electronic Engineering or related discipline
Schematic capture and PCB layout using tools such as Altium, OrCAD or KiCad
Knowledge of embedded systems and microcontroller-based design
Excellent analytical, problem-solving, verbal and written communication skills
This is an exciting opportunity to join a growing company who can offer the opportunity for career progression and personal development.
To apply for this Electronics Engineer job, based in Thurso, please send your CV to ndrain@redlinegroup.Com, or for more information contact Nick Drain on 01582 878828. ....Read more...
Type: Permanent Location: Thurso, Scotland
Start: ASAP
Salary / Rate: £45000 - £55000 per annum
Posted: 2026-05-28 09:46:13
-
An exciting Project Manager job has arisen to join a global industry leader in the design and development of complex special purpose machinery which is used in the production of semiconductors.
This Project Manager job is based in East Sussex, commutable from Bexhill, Hastings, Royal Tunbridge Wells, Heathfield, Uckfield, Haywards Heath, Burgess hill, Eastbourne, Brighton, Newhaven and Seaford.
With over 30 years' experience in industry with the attitude and opportunity of a start-up company, my Eastbourne based client are now looking to add a Project Manager to their expanding, high performing team.
The successful candidate will have a strong track record in delivery of engineering projects; they will be self-motivated, enthusiastic, technically excellent, business savvy and a strong communicator.
The successful project manager will come from a manufacturing background, either mechanical or electronic background.
Skills and Responsibilities of this Project Manager job:
- Create project plans, present to and review with customers.
- Provide technical leadership and direction to cross functional project teams (hardware, software, mechanical).
- Will manage the NPI development and ensure new products are delivered on time and to quality and cost targets.
- Experience with electronic assembly techniques.
- Advanced Microsoft Professional experience.
- Good Project Management experience with Waterfall & Scrum.
Benefits include hybrid working and a company bonus.
They are not in a position to sponsor work Visas.
This Project Manager job is to join a highly successful technology company in the Eastbourne, East Sussex area and play an important role in their projects going forward.
They are renowned for investing into their employees and providing excellent training & career progression.
For more information please contract Ricky Wilcocks on either rwilcocks@redlinegroup.Com or 01582 87 8810 ....Read more...
Type: Permanent Location: Eastbourne, England
Start: ASAP
Salary / Rate: £45000 - £57000 per annum
Posted: 2026-05-28 09:01:13
-
Subsea under water connector system Assembly Technician required to join an electrical and mechanical production team who build electrical connector pins for Oil and Gas tree systems.
Responsibilities
Mechanical, and electrical assembly.
Test, measurement and production process control.
Maintain tools, machinery, and equipment to ensure optimal operation.
Support continuous improvement initiatives and apply modern manufacturing principles.
Skills
Hands on experience in mechanical assembly, testing and manufacture.
Ability to read blueprints and perform precision electrical tasks such as wire preparation, crimping, and harness termination.
Hydraulic, electronic, and mechanical system understanding. ....Read more...
Type: Permanent Location: Barrow in Furness, England
Start: ASAP
Duration: Temp to Perm
Salary / Rate: £28000 - £36000 Per Annum None
Posted: 2026-05-27 11:20:44
-
An RF Test Engineer is sought to join an innovative engineering team in Sedgefield, County Durham, contributing to the development and validation of advanced RF, microwave and mmWave communication technologies for mission-critical applications.
The RF Test Engineer, Sedgefield, County Durham, will be expected to develop your understanding in the field, learning from peers and senior engineers in technical areas and industry best practices.
This may include RF test development, automated test systems, microwave measurement techniques, and production test processes within a high-technology manufacturing environment.
Responsibilities include:
Work with engineering and production teams to define RF test requirements and validation specifications.
Develop and maintain automated RF test solutions using LabVIEW and TestStand.
Create and execute test procedures for RF and microwave products from prototype through to volume production.
Debug and validate RF hardware systems using RF test equipment, microwave measurement tools, and diagnostic instrumentation.
Collaborate with engineering and manufacturing teams for seamless integration of test solutions into production environments.
Maintain comprehensive technical documentation, reports, and customer-facing presentations.
Support production and engineering teams with technical queries and fault diagnosis.
Analyse test data and provide technical recommendations to improve test capability and product performance.
Support the full test solution lifecycle including instrumentation selection, implementation, training, and change management.
Key skills & experience:
Degree qualification in Engineering or equivalent industry experience.
Proficiency with LabVIEW, TestStand, and RF test equipment.
Practical experience with microwave and RF measurement and diagnostic techniques.
Strong technical, analytical, and problem-solving skills.
Experience within electronics manufacturing or production test environments is beneficial.
Knowledge of serial communication protocols such as I2C/SPI would be advantageous.
Effective communication and teamwork abilities.
Ability to obtain UK Security Clearance is essential.
How to apply:
Apply now for the RF Test Engineer role in Sedgefield, County Durham.
Send your CV to adighton@redlinegorup.Com or call Adam on 01582 878821. ....Read more...
Type: Permanent Location: Sedgefield, England
Start: ASAP
Salary / Rate: £45000 - £65000 per annum
Posted: 2026-05-26 15:28:53
-
An RF Filter Alignment Technician is sought to join an innovative engineering team in Sedgefield, County Durham, contributing to the alignment, calibration, and testing of advanced RF, microwave and mmWave subsystems for mission-critical communication applications.
The RF Filter Alignment Technician, Sedgefield, County Durham, will be expected to develop your understanding in the field, learning from peers and senior engineers in technical areas and industry best practices.
This may include RF alignment techniques, microwave testing processes, calibration procedures, and production support within a high-technology manufacturing environment.
Responsibilities include:
Work with design, test, and production teams to support RF alignment and test activities.
Configure and operate RF and microwave test benches using spectrum analysers, network analysers, signal generators, power meters, and related instrumentation.
Perform alignment, tuning, and optimisation of RF/mmWave circuits, filters, amplifiers, transmit/receive units, and subsystems.
Develop and execute alignment and calibration procedures for prototypes and production units.
Debug and validate RF systems by troubleshooting component-level and board-level issues.
Collaborate with mechanical, electronic, and production engineering teams to improve manufacturability and testability.
Maintain comprehensive technical documentation, calibration logs, and test records.
Support production teams with technical queries, diagnostics, and maintenance of RF test equipment and test benches.
Assist with new product introduction (NPI) activities, supporting the transition from prototype to production.
Recommend and implement improvements to alignment processes, tooling, and test procedures.
Key skills & experience:
Qualification in Electronics, RF Engineering, or equivalent industry experience.
Proficiency with RF and microwave test equipment including network analysers, spectrum analysers, and signal generators.
Practical experience with RF alignment, calibration, and microwave measurement techniques.
Strong troubleshooting and fault-finding skills on RF and electronic assemblies.
Experience working within electronics manufacturing or production environments.
Understanding of RF parameters including gain, return loss, frequency response, noise, and spurious emissions.
Strong problem-solving and analytical skills.
Effective communication and teamwork abilities.
Positive attitude towards health and safety and continuous improvement.
How to apply:
Apply now for the RF Filter Alignment Technician role in Sedgefield, County Durham.
Send your CV to adighton@redlinegorup.Com or call Adam on 01582 878821. ....Read more...
Type: Permanent Location: Sedgefield, England
Start: ASAP
Salary / Rate: £28000 - £30000 per annum
Posted: 2026-05-26 15:26:27
