-
A Technical Support Engineer is sought to join an established engineering team in Dover, Kent, contributing to the delivery of technical support, troubleshooting, and application expertise across a range of electrical testing and measurement products.
The Technical Support Engineer, Dover, Kent, will be expected to develop your understanding in the field, learning from peers and senior engineers in technical areas and industry best practices.
This may include supporting low voltage instruments, electrical test equipment, battery systems, and rotating machines, as well as contributing to product development, training, and customer engagement activities.
Responsibilities include:
Provide expert technical support to customers and distributors via phone, email, and other communication channels.
Deliver on-site technical support and assistance when required.
Support pre- and post-sales activities, acting as a key technical point of contact.
Create technical content including application notes, competitor comparisons, and support materials.
Support product development activities, including testing during alpha, beta, and product launch phases.
Assist with regression testing and validation of new products.
Deliver technical demonstrations at trade shows, exhibitions, and industry events.
Maintain and manage demonstration equipment and departmental stock.
Input and maintain accurate records within CRM systems.
Complete departmental reporting, including visit reports, monthly updates, and expense submissions.
Support internal teams including sales, product management, and marketing with technical expertise.
Undertake additional duties such as testing services and workshop support as required.
Key skills & experience:
Strong understanding of electrical installations and testing procedures (e.G., BS7671, BS2391).
Hands-on experience as an electrician within commercial or industrial environments.
HNC/HND in Electrical Engineering or working towards a degree-level qualification.
Strong knowledge of electrical power systems and testing/measurement principles.
Proficiency with IT systems including MS Office and CRM platforms.
Strong communication and presentation skills with a customer-focused approach.
Ability to manage multiple priorities and work independently.
Full UK driving licence and willingness to travel within the UK and internationally.
How to apply:
Apply now for the Technical Support Engineer role in Dover, Kent.
Send your CV to adighton@redlinegroup.Com or call Adam on 01582878821. ....Read more...
Type: Permanent Location: Dover, England
Start: ASAP
Salary / Rate: £35000 - £42000 per annum
Posted: 2026-03-18 15:49:39
-
Production & Process Engineer
Location:Exeter, Devon, UK (On-site)
An opportunity has arisen for a Production & Process Engineer to join a specialist engineering and manufacturing organisation delivering high-performance mechanical systems for defence and specialist industrial applications.
The Exeter based organisation has a long-standing heritage in the design, development and manufacture of complex engineered products, supporting both domestic and international customers across defence and commercial markets.
With a strong in-house capability spanning design, fabrication, assembly and testing, the business operates across both proprietary product lines and third-party engineering programmes.
The company has experienced continued growth driven by new product development and defence-related programmes, and is investing in its engineering and manufacturing capability to support future demand.
This role sits at the intersection of design engineering and manufacturing, focused on improving production processes, supporting new product introduction and driving continuous improvement across both internal operations and the wider supply chain.
This position is suited to a hands-on mechanical or production engineer with strong CAD capability and a solid understanding of manufacturing processes, looking to work within a collaborative, workshop-integrated engineering environment.
Main Responsibilities of the Production & Process Engineer (Exeter, Devon, UK):
Design and develop 3D models and detailed engineering drawings using CAD software (SolidWorks or similar)
Create clear and effective production documentation to support manufacturing operations
Review and improve production engineering drawings, implementing design and process enhancements
Support engineering change control processes, including drawing release and revision management
Develop and implement standard operating procedures and work instructions to reduce manufacturing variability
Identify and implement continuous improvement initiatives to increase efficiency and reduce waste
Support new product introduction by defining manufacturing requirements and build processes
Investigate production and process issues, providing technical solutions and support
Create and manage production Bills of Materials (BOMs) and support virtual build reviews
Work closely with engineering, operations, suppliers and customers to resolve technical queries
Source and evaluate components in collaboration with suppliers
Perform basic structural analysis and support simulation activities where required
Support design reviews and incorporate feedback into engineering solutions
Implement production performance metrics and contribute to process optimisation initiatives
Requirements of the Production & Process Engineer (Devon, UK):
HNC, HND or Degree in Mechanical Engineering, Automotive Engineering or a related discipline
Proven experience in an engineering design or production engineering role
Strong 3D CAD skills (SolidWorks preferred) with the ability to produce detailed models and drawings
Experience working within a manufacturing, workshop or production environment
Understanding of engineering drawing control and PDM systems
Knowledge of manufacturing processes including machining, fabrication and assembly
Ability to perform basic engineering calculations and support analysis activities
Strong communication skills with the ability to work cross-functionally with internal teams and suppliers
Good report writing and documentation skills
Strong organisational skills with the ability to manage multiple tasks and meet deadlines
Proactive, hands-on approach with a focus on quality and continuous improvement
Desirable Experience:
Experience with FEA tools (e.G.
ANSYS)
Exposure to vehicle systems or mechanical assemblies
Experience with production testing, data logging or instrumentation
Understanding of supply chain and manufacturing process optimisation
Working Pattern & Benefits:
Full-time, on-site role based in Devon, UK
Collaborative engineering environment with close interaction between design and manufacturing teams
Opportunity to work on complex, high-performance engineered products
Involvement in full product lifecycle from concept through to production
Supportive team environment with opportunities for professional development
To apply for this Production & Process Engineer role, please send your CV to Nicola King:
Nking@redlinegroup.Com
01582 878 839 ....Read more...
Type: Permanent Location: Exeter, England
Start: ASAP
Salary / Rate: £40000 - £45000 per annum
Posted: 2026-03-18 10:45:08
-
Power Electronics Engineer — Medium Power (100 W-10 kW)
Clevedon, Somerset
Our client is seeking an experienced Power Electronics Engineer to join their engineering team, contributing to the design and development of advanced medium-power electronic systems.
This role offers hands-on involvement across the full product lifecycle, working on power conversion, control electronics, and embedded systems typically in the 100 W-10 kW range.
You will work closely with multidisciplinary teams to deliver robust, production-ready designs for modern electrical and industrial applications.
Key Responsibilities:
Design and develop medium-power electronics (100 W-10 kW) including:
Power conversion stages
Analog and digital control circuitry
Signal conditioning and feedback systems
Produce high-quality schematic designs, component selection, and multi-layer PCB layouts.
Perform simulation, prototyping, debugging, and verification testing.
Support new product introduction from concept through production.
Collaborate with test, manufacturing, and service teams to ensure reliable and manufacturable designs.
Contribute to continuous improvement of design processes and product performance.
Ensure compliance with ISO9001, ISO14001, EMC requirements, and relevant safety standards.
Qualifications & Experience
Degree in Power Electronics, Electronics Engineering, Embedded Systems, or equivalent.
Strong background in hardware and power electronics design, including: Analog and digital circuit design, Power supply and converter design, High-quality PCB layout (OrCad preferred)
You can be experienced from 1 year all the way through to Senior level.
This position offers a rare balance between hands-on power electronics design, analog engineering, and real-world medium-power systems, making it ideal for engineers who enjoy working across both control electronics and power hardware.
Please send your CV to ndrain@redlinegroup.Com Or call 01582878828 to speak with Nick Drain for more information. ....Read more...
Type: Permanent Location: Clevedon, England
Start: ASAP
Salary / Rate: £45000 - £65000 per annum
Posted: 2026-03-18 09:22:06
-
Electronic Design Engineer required to work on detailed hardware design, building test equipment for research and device deployment.
This is a hands on technical leadership role, suiting a Seinor or Pricipal Enigneer with international standards test and compliance process management knowledge.
Requirements
Schematic CAD experience taking designs through to production.
Experience of designing analogue front ends, ESD protection and for EMC
Experience with board bring up and debugging
Electronics Engineering degree or equivalent and commercial design experience.
Embedded C microcontrollers
Altium
PCB layout
RF and high-speed data busses ....Read more...
Type: Permanent Location: Central London, England
Start: ASAP
Duration: Permanent
Salary / Rate: £66000 - £82000 Per Annum None
Posted: 2026-03-17 16:39:38
-
Holt Engineering are working with a family run manufacturing based in Portsmouth.
They are looking for a proactive and detail-oriented Production Support Technician to join the manufacturing team.
This is a hands-on role supporting production operations, ensuring efficiency, accuracy, and smooth communication across departments.
You will play a key part in maintaining production systems, managing documentation, and supporting shop floor activities.
This is a Full time Role working Monday to Friday 7:30am-4pm with an early finish on Fridays.
Paying £14-£14.50 Per Hour
Key Responsibilities for the Production Support Technician:
- Act as the main contact for production queries, working with the Inspection team
- Process forms submitted by operators
- Carry out weekly checks of COSHH cupboards
- Manage the tool cupboard, including issuing and tracking tools
- Update and maintain Manufacturing Build Instructions, including digitising documents
- Keep location data up to date on the Production Management system
- Return unused stock to stores
- Monitor job timings and report any issues
- Update BOM requests and manage data
- Raise Non-Conformance Incident Reports
- Issue stock for specific projects
To be a successful Production Support Technician:
- Previous experience working in a manufacturing environment
- Strong organisational skills with attention to detail
- Confident using production or manufacturing systems
- Good communication skills and ability to work across teams
- Ability to manage multiple tasks and prioritise effectively
- Experience with time and motion studies or process improvement (Desirable)
Benefits for the Production Support Technician:
- Competitive salary
- Free Parking
- Opportunities for development and progression long term
- Supportive and collaborative working environment
- Training on internal systems and processes
If you are looking for a new challenge in your Career then the Production Support Technician role could be the position for you! For further details please call 01202 147689. ....Read more...
Type: Permanent Location: Hilsea,England
Start: 17/03/2026
Salary / Rate: £14 - £14.50 per hour
Posted: 2026-03-17 16:24:03
-
Electronic Test Equipment Calibration Engineer required to join a growing Calibration and Maintenance team for a defence company supporting Armed Forces to defending our freedom.
As part of an experienced team of Calibration and Maintenance Engineers you will support complex test platforms in the manufacture and test of missile systems by calibrating bespoke factory test equipment from DC to Microwave.
Requirements
Experience calibrating test equipment to component level.
Ability to work from specifications, handbooks and drawings to conduct appropriate measurements and repairs down to component level on electronic test equipment.
HNC, HND or higher qualification in Electrical or Electronics Engineering.
Responsibilities
Service Electrical and Electronic Test Equipment, including Special to Type Test Equipment STTE, work is extremely varied, interesting and challenging.
Support manufacturing across all stages of product assembly integration and test.
Resolve routine and nonroutine including calibrations, commissioning, drift analysis, fault finding and repair of test equipment. ....Read more...
Type: Permanent Location: Stevenage, England
Start: ASAP
Duration: Permanent
Salary / Rate: £32000 - £48000 Per Annum None
Posted: 2026-03-17 12:50:37
-
Calibration Engineer required to test, calibrate and adjust a wide range of metrological test and measurement equipment on site and external customer premises
Skills
Electrical or Electronic qualification or relevant experience.
Experience within the instrumentation industry.
Mathematical knowledge.
Quality standards.
Responsibilities
Provide detailed calibration certificates.
Understand equipment specifications and test techniques
Obtain and maintain a library of product specifications.
Calibrate multi parameter test equipment.
Provide certificate details when calibration is complete.
Synchronise data within designated timescales.
Keeping thorough record of calibration procedures and results. ....Read more...
Type: Permanent Location: Peterlee, England
Start: ASAP
Duration: Permanent
Salary / Rate: £32000 - £48000 Per Annum None
Posted: 2026-03-17 12:45:29
-
Laboratory Calibration Technician required to fine tune power testing and measurement equipment for a wide range of client driven power electronics applications, testing and measurement of: energy storage devices, electric cars power trains and renewable energy sources.
Our client provides ISO and IEC 17025 standard Calibration Laboratory Services, as a calibration technician you will calibrate measuring instruments and report on calibration results.
Requirements
Hands-on calibration experience of test equipment in a laboratory environment.
Must be able to work with minimal supervision.
Excellent customer service skills. ....Read more...
Type: Permanent Location: Petersfield, England
Start: ASAP
Duration: Permanent
Salary / Rate: £35000 - £48000 Per Annum None
Posted: 2026-03-17 12:41:24
-
Leading company of electrical equipment are seeking a highly skilled Calibration Engineer to join their dedicated team.
As a Calibration Engineer will ensure the accuracy and reliability of electrical and electronic instruments through meticulous calibration procedures.
You will work closely with service team to provide comprehensive repair and calibration services, both in our environmentally-controlled laboratory and on-site at client locations.
Responsibilities
Perform calibration and testing of AC and DC power equipment, metering test equipment, and general purpose test and measurement instruments.
Conduct on-site visits for equipment repairs and calibration as part of our field service capability.
Maintain accurate records of calibration activities and ensure traceability to national standards.
Requirements
Bachelor's degree in Electrical Engineering, Electronics, or related field.
Proven experience in calibration, preferably in a UKAS-accredited laboratory environment.
Strong knowledge of AC power and energy measurements, with proficiency in calibration techniques.
Familiarity with electrical test equipment and standards, including power sources and electronic instruments. ....Read more...
Type: Permanent Location: Guildford, England
Start: ASAP
Duration: Permanent
Salary / Rate: £38000 - £45000 Per Annum None
Posted: 2026-03-17 12:40:14
-
We are looking for a Calibration Technician with hands on laboratory experience in calibration and a UKAS accredited environment.
The ideal candidate will have expertise in calibrating a range of instruments, including temperature, dimensional, torque, pressure, frequency, and vibration equipment.
Key Responsibilities
Perform calibration, routine inspection, testing, maintenance, and repair of meters, gauges, instruments, and other measurement equipment in compliance with UKAS standards.
Ensure the calibration and traceability of an externally audited, UKAS-accredited electrical laboratory.
Coordinate externally calibrated equipment, manage maintenance schedules, and oversee budget planning.
Conduct internal calibration of calibrators and standards equipment used within the lab.
Key Skills
Proven experience in laboratory calibration (temperature, torque, pressure, vibration, etc.).
Strong understanding of UKAS accreditation and external auditing.
Experience in equipment maintenance and budget coordination.
Ability to troubleshoot, repair, and optimize lab instruments and measuring equipment. ....Read more...
Type: Permanent Location: Corby, England
Start: ASAP
Duration: Permanent
Salary / Rate: £24000 - £33000 Per Annum None
Posted: 2026-03-17 12:40:10
-
Test Technician - Electronics
Are you a Test Technician with hands-on experience testing electronic or power-based systems, looking to work with high-power, cutting-edge technology?
Our client, a global leader in green energy technology, is expanding their specialist R&D and test team in Glasgow, Scotland.
This hybrid role offers strong technical exposure, long-term development, and the opportunity to support advanced battery charging and power conversion products used in robotics, defence, rail, and industrial automation.
Key Responsibilities for this Test Technician - Electronics job are:
Test industrial charging systems, comparing results to given specifications.
Construct, modify and maintain test fixtures and setups, following electrical diagrams.
Setup equipment such as power supplies, oscilloscopes and data loggers.
Assembly of cables and connectors for test setups.
Prepare reports to be shared with R&D engineers and management.
Requirements for this Test Technician - Electronics job are:
Experience working with high power electrical systems.
Knowledge of product test procedures and the ability to follow instructions.
Practical knowledge of laboratory equipment such as Thermal chambers, power supplies and oscilloscopes would be ideal.
Otherwise, the potential to transfer skills from another background.
The ability to work safely with high voltages, as our current products may be powered by up to 660Vac, 3Ph, input.
Experience in industrial, defence, rail, power, or similar sectors is beneficial.
To apply for this Test Technician - Electronics role: Please send your CV to NDrain@redlinegroup.Com ....Read more...
Type: Permanent Location: Glasgow, Scotland
Start: ASAP
Salary / Rate: £30000 - £40000 per annum
Posted: 2026-03-16 00:00:04
-
An urgent job as a Mechanical Engineer has arisen in Great Yarmouth, Norfolk for a company that offers a 9 day working fortnight!
An exciting new job has arisen for a Mechanical Engineer, based in Great Yarmouth, Norfolk to design, develop, and optimise precision jigs, fixtures, and tooling to support the manufacturing of microelectronic components.
The ideal Mechanical Engineer, based in Great Yarmouth, Norfolk will have;
Produce high quality conceptual and detailed designs for jigs, fixtures, nests, alignment systems, and handling tools.
Use SolidWorks and Creo for 3D modelling, assemblies, simulations, and fully defined engineering drawings.
Proficiency in SolidWorks, Creo or similar, with the ability to create detailed drawings and manufacturing packs.
This is for a company that specialise in the design and manufacture of secure communication devices for predominately the defence and aerospace sectors.
They offer a range of excellent benefits from a 9 day working fortnight, hybrid working, flexitime as well as assisting with relocation costs of up to £8,000.
APPLY NOW! For the Mechanical Engineer job located in Great Yarmouth, Norfolk by sending a cover letter and CV to TDrew@redlinegroup.Com or by calling Tom Drew on 01582 878848 quoting ref.
THD1364.
Alternatively, if this job is not suitable but you are looking for a job within Engineering, please call 01582 878 848 for a confidential discussion. ....Read more...
Type: Permanent Location: Great Yarmouth, England
Start: ASAP
Salary / Rate: £45000 - £47000 per annum
Posted: 2026-03-15 00:00:04
-
Junior PCB Layout Engineer - Glasgow (Hybrid)
Our client, a precision engineering company specialising in high-end audio equipment, is seeking a Junior PCB Layout Engineer to join their Glasgow-based team.
This is a fantastic opportunity for a graduate or junior engineer with a passion for PCB design and electronics.
Key responsibilities for the Junior PCB Layout Engineer position:
PCB design and layout for audio products
Support schematic capture and library management
Assist with testing, prototyping, and project work
Work closely with R&D, design, and manufacturing teams
About the Junior PCB Layout Engineer
Interest in PCB layout and electronic design
Degree in Electronics or related discipline preferred
Strong communication and willingness to learn
Some experience with PCB design tools desirable (training provided)
Apply now to join a growing Glasgow based team with real progression opportunities in PCB design and precision engineering.
Please send an updated cv over to nking@redlinegroup.Com or call 01582 878839.
....Read more...
Type: Permanent Location: Glasgow, Scotland
Start: ASAP
Salary / Rate: £30000 - £40000 per annum
Posted: 2026-03-13 16:43:38
-
My client, a globally recognised audio manufacturer based in Glasgow, is seeking a highly skilled Electronics Design Engineer with strong analogue expertise.
This is an exceptional opportunity to work on cutting-edge, low-noise electronics for some of the best music systems in the world.
This position is ideal for an engineer who thrives in both analogue and digital domains.
You will design, test, and refine complex mixed-signal circuitry used in premium audio systems where noise performance, signal integrity, and precision are critical.
You'll work on-site within a technically exceptional R&D team dedicated to pushing the boundaries of high-end audio design.
Based in Glasgow, this company is internationally renowned for producing some of the highest-performing audio systems in existence.
Their engineering is rooted in deep analogue expertise, innovative mixed-signal design, and meticulous craftsmanship.
This is a rare chance to contribute to world-class products with a company that values long-term employee development.
Essential Requirements (must haves) for the Electronics Design Engineer:
Excellent understanding of analogue circuit principles (op-amps, filters, noise optimisation, precision signal paths).
This will be technically tested.
Practical experience in FPGA design using VHDL or Verilog.
Ties to Glasgow or Scotland - they seek engineers committed to a long-term future with the company.
Already eligible to work in the UK - no visa sponsorship or overseas relocation.
On-site role - all-remote working is not available.
Genuine enthusiasm for audio electronics and precision design (not just being a musician).
Key Responsibilities for the Electronics Design Engineer:
Design, simulate, and test mixed-signal circuits for high-end audio devices
Develop analogue front-ends with extremely low noise and distortion
Work on data conversion stages, DSP pathways, and FPGA-based control
Generate schematics, work closely on PCB layout optimisation, and validate prototypes
Collaborate with hardware, software, and acoustic engineering teams
Ensure designs meet the company's world-class audio performance standards
Interested? Apply Today!
If you're a Electronics Design Engineer with strong analogue knowledge, send your updated CV to Nicola at Nking@redlinegroup.Com Or contact Nicola directly on 01582 878839/ 07961 158788.
Take the next step in your career and help shape the future of world-class audio engineering. ....Read more...
Type: Permanent Location: Glasgow, Scotland
Start: ASAP
Salary / Rate: £35000 - £55000 per annum
Posted: 2026-03-13 16:43:02
-
Electrical Assembly Technician required ideally with IPC certification (IPC 620 or J-Std ideal) to work on PCB component soldering, micro-soldering, crimping and general wiring on the assembly of high value, low volume rugged devices.
You will work to schematics, following routings, testing and taking performance measurements with a PC based system.
This role will be building systems and various components of complex drilling tools that have to perform within tight tolerances.
Key Skills.
Soldering
Crimping
Wiring
Electronics equipment
Test and build equipment
Safety equipment ....Read more...
Type: Permanent Location: Stroud, England
Start: ASAP
Duration: Permanent
Salary / Rate: £32000 - £36000 Per Annum None
Posted: 2026-03-13 15:32:44
-
A Field Service Engineer is sought to join a growing engineering team in Cork, Ireland, contributing to the installation, service, commissioning, and technical support of advanced electronics manufacturing equipment across customer sites.
The Field Service Engineer, Cork, Ireland, will be expected to develop your understanding in the field, learning from peers and senior engineers in technical areas and industry best practices.
This may include installation and commissioning of SMT equipment, fault diagnosis, preventative maintenance, calibration, and applications support within electronics manufacturing environments.
Responsibilities include:
Provide installation, service, repair, calibration, and preventative maintenance of equipment at customer sites.
Commission equipment at customer facilities and support final release into production environments.
Assess the suitability of equipment and processes prior to customer purchase where required.
Diagnose faults and resolve technical issues relating to equipment and production processes.
Provide technical expertise and support to customers and internal stakeholders.
Maintain accurate documentation and service records associated with installations, maintenance, and repairs.
Identify equipment and process-related issues that could impact successful installation, training, or commissioning.
Support customer training and applications assistance where required.
Attend meetings, conferences, trade shows, and technical training courses as necessary.
Ensure full compliance with company policies, procedures, and operational standards.
Key skills & experience:
Degree in Mechanical or Electrical Engineering, or equivalent industry experience.
Minimum of five years' experience within electronic engineering or electronics manufacturing environments.
Experience installing, servicing, repairing, and maintaining industrial or manufacturing equipment.
Knowledge of SMT and electronics manufacturing processes such as printing, dispensing, pick-and-place, reflow, vapour phase, selective and wave soldering, coating, cleaning, testing, and inspection.
Ability to interpret electrical and mechanical engineering drawings.
Strong IT skills including knowledge of PC systems, networking, or SQL databases.
Strong practical mechanical and technical problem-solving abilities.
Highly organised, self-motivated, and able to work independently in field-based environments.
Full driving licence and willingness to travel across Ireland and occasionally the UK.
How to apply:
Apply now for the Field Service Engineer role in Cork, Ireland.
Send your CV to adighton@redlinegroup.Com or call Adam on 01582878821. ....Read more...
Type: Permanent Location: Cork, Republic of Ireland
Start: ASAP
Salary / Rate: £35000 - £42000 per annum
Posted: 2026-03-13 15:32:31
-
A fantastic opportunity has arisen for a Mechanical Manufacturing Technician at a leading company.
You will be working with the production team comprised of Electrical assemblers, Electrical manufacturing Technicians, and supervisors
Key requirements
Good competencies with electrical tools and general test equipment.
Capable of producing deliverable items from full drawing packs with minimal additional help.
Good mechanical technician skills.
Experience with various hand tools and assembly tools (presses)
Testing, low and high voltage assemblies, basic soldering, crimping, and mechanical lifting.
Basic fault finding when necessary.
Key skills
Experience in mechanical assembly and pressure equipment.
Experience in documentation, working with drawings.
As part of the recruitment process a practical test will be performed.
The test will involve building a standard sub-assembly.
Experience in fault finding, repairing electromechanically systems ....Read more...
Type: Permanent Location: Stroud, England
Start: ASAP
Duration: Permanent
Salary / Rate: £36000 - £38000 Per Annum None
Posted: 2026-03-13 15:28:43
-
Are you an experienced Electrical Installation Technician - Midlands with a background in vehicle electrical systems and onboard technology? This is an exciting mobile opportunity to work on a wide range of vehicles, delivering advanced onboard systems for fleet and public transport applications across the UK.
This role offers variety, autonomy, and strong career progression potential within a growing organisation that supports innovation, development, and long-term career growth.
You'll be installing, commissioning, and validating complex onboard systems across buses, cars, and trucks, working both independently and as part of a wider project team.
Key responsibilities of the Electrical Installation Technician - Midlands job:
Install and commission onboard systems, including CCTV, passenger counting, onboard media, telematics, and communications routers.
Commission new systems for customer handover, including linking installations to the central portal, using both laptop-based diagnostics and hands-on fault rectification.
Carry out installations personally and verify/commission systems installed by factories or third-party providers.
Support Project Engineers on new installations and projects to ensure best practice and successful delivery.
Accurately report daily progress and key information using worksheets and email updates.
Communicate effectively with internal teams and customer site staff to ensure smooth project delivery.
Manage issued stock responsibly and ensure unused stock is returned in line with company processes.
Maintain a safe, clean, and professional working environment at all customer sites.
Take responsibility for company vehicle care and professional presentation while representing the business.
Skills & experience required for the Electrical Installation Technician - Midlands job:
Proven experience working with motor vehicle electrical systems across cars, buses, or trucks.
Qualifications in electrical, auto-electrical, or EV awareness (advantageous but not essential).
Excellent communication skills, both internally and in customer-facing environments.
Ability to work independently and collaboratively as part of a team.
Full UK driving licence and a valid passport.
Experience working to health and safety standards.
Willingness to undertake a basic DBS check as part of the role.
Package & benefits for the Electrical Installation Technician - Midlands job:
Company vehicle(van)
Company laptop and mobile phone
Ongoing training and development
Pension scheme
25 days' holiday
If this Electrical Installation Technician - Midlands job could be of interest, send your CV to adighton@redlinegroup.Com or call Adam on 01582 878821 for more details.
....Read more...
Type: Permanent Location: England
Start: ASAP
Salary / Rate: £32000 - £35000 per annum
Posted: 2026-03-13 14:43:59
-
Are you an experienced Electrical Installation Technician - South with a background in vehicle electrical systems and onboard technology? This is an exciting mobile opportunity to work on a wide range of vehicles, delivering advanced onboard systems for fleet and public transport applications across the UK.
This role offers variety, autonomy, and strong career progression potential within a growing organisation that supports innovation, development, and long-term career growth.
You'll be installing, commissioning, and validating complex onboard systems across buses, cars, and trucks, working both independently and as part of a wider project team.
Key responsibilities of the Electrical Installation Technician - South job:
Install and commission onboard systems, including CCTV, passenger counting, onboard media, telematics, and communications routers.
Commission new systems for customer handover, including linking installations to the central portal, using both laptop-based diagnostics and hands-on fault rectification.
Carry out installations personally and verify/commission systems installed by factories or third-party providers.
Support Project Engineers on new installations and projects to ensure best practice and successful delivery.
Accurately report daily progress and key information using worksheets and email updates.
Communicate effectively with internal teams and customer site staff to ensure smooth project delivery.
Manage issued stock responsibly and ensure unused stock is returned in line with company processes.
Maintain a safe, clean, and professional working environment at all customer sites.
Take responsibility for company vehicle care and professional presentation while representing the business.
Skills & experience required for the Electrical Installation Technician - South job:
Proven experience working with motor vehicle electrical systems across cars, buses, or trucks.
Qualifications in electrical, auto-electrical, or EV awareness (advantageous but not essential).
Excellent communication skills, both internally and in customer-facing environments.
Ability to work independently and collaboratively as part of a team.
Full UK driving licence and a valid passport.
Experience working to health and safety standards.
Willingness to undertake a basic DBS check as part of the role.
Package & benefits for the Electrical Installation Technician - South job:
Company vehicle (van)
Company laptop and mobile phone
Ongoing training and development
Pension scheme
25 days' holiday
If this Electrical Installation Technician - South job could be of interest, send your CV to adighton@redlinegroup.Com or call Adam on 01582 878821 for more details. ....Read more...
Type: Permanent Location: England
Start: ASAP
Salary / Rate: £32000 - £35000 per annum
Posted: 2026-03-13 14:39:35
-
Mechanical Design Engineer with subsea connector experience required to design and develop solutions with CAD and FEA tools high pressure underwater applications.
Requirements
Subsea or offshore mechanical system design experience.
CAD software and FEA tool fluency.
Subsea production systems, umbilicals, jumpers, electrical and fibre connector knowledge.
Pressure testing, connector design.
Understanding of sealing technologies, pressure-rated designs, and mechanical-electrical interface design.
BEng or MEng in mechanical engineering or related degree subject.
Responsibilities
Design and develop Low and High Voltage subsea electrical and optical connectors, pressure housings, and sealing systems.
Perform FEA mechanical, thermal, and pressure simulations for HPHT high pressure and temperature for deep sea environments.
Prototype testing, pressure testing, and standard qualification.
Detailed documentation Design Specifications, Qualification Test procedures, 3D models, 2D drawings, BOMs, and Test Reports.
Design reviews and PEER reviews.
RCAs, FMEA, dFMEA, pFEMA at development and design cycles.
Cross-functional Collaboration.
Technical 2D drawings ....Read more...
Type: Contract Location: Barrow-in-Furness, England
Start: ASAP
Duration: 12 months
Salary / Rate: £40 - £45 Per Hour Inside IR35
Posted: 2026-03-13 12:24:07
-
Holt Engineering are working with a proficent in electronics manufacturing.
They are looking for a highly organised Sales Administrator to support our sales team with customer enquiries, quotations, and order processing.
This role plays a key part in ensuring sales operations run smoothly while maintaining excellent customer service and accurate sales records.
This is a Temporary Contract working Full Time Monday to Friday The Hours are 7:30am - 4:00pm with an early finish on Fridays!
The Sales Administrator is Paying from £12.21 - £14 per hour (depending on expereince)
Key Responsibilities for the Sales Administrator:
- Provide administrative support to the sales team
- Prepare quotations, proposals, and sales documentation
- Process customer orders accurately and efficiently
- Respond to customer enquiries and provide order updates
- Maintain CRM and sales tracking systems
- Produce basic sales reports and maintain records
- Liaise with internal teams to ensure orders are fulfilled
To be a successful Sales Administrator:
- Strong administrative and organisational skills
- Excellent communication skills
- High attention to detail
- Good knowledge of Microsoft Office (Excel, Word, Outlook)
- Ability to manage multiple tasks and deadlines
- Experience in a sales administration or customer service role
- Experience using CRM or ERP systems
What Were Looking For in a Sales Administrator:
- Highly organised and proactive
- Customer-focused with a professional approach
- Strong team player with a positive attitude
If you are interested in a new career opportunity this could be the role for you! Please APPLY NOW! Or call 01202 147689. ....Read more...
Type: Contract Location: Waterlooville,England
Start: 12/03/2026
Duration: 1.0 HOUR
Salary / Rate: £12.21 - £14 per hour
Posted: 2026-03-12 16:20:07
-
A Graduate Electronic Component Engineer is required to join an innovative and collaborative engineering team based in Clacton-on-Sea.
This is an excellent opportunity for a graduate engineer to develop their career while supporting the selection, qualification, and lifecycle management of electronic components used across advanced hardware designs.
As a Graduate Electronic Component Engineer, you will work closely with experienced engineers and cross-functional teams, gaining valuable exposure to industry best practices in component selection, BOM management, compliance, and lifecycle monitoring.
This role offers hands-on involvement with both engineering and supply chain teams, providing a strong foundation in the technical and commercial aspects of electronic component management within a modern hardware development environment.
Responsibilities for this Graduate Electronic Component Engineer based in Clacton-on-Sea:
Work closely with hardware design, manufacturing, quality, and procurement teams to define component specifications and selection criteria
Create and maintain component libraries to support schematic capture and PCB layout activities
Perform component evaluations including parametric comparisons, second-source identification, and suitability assessments
Validate and assess component performance through testing and evaluation activities to ensure compliance with design requirements
Key Skills & Experience for this Graduate Electronic Component Engineer based in Clacton-on-Sea:
Degree in Electronic Engineering or a closely related discipline (or equivalent industry experience)
Familiarity with schematic capture and PCB layout tools
Practical experience working with BOMs, component datasheets, and spreadsheets
Strong analytical and problem-solving skills with excellent attention to detail
Effective communication and teamwork skills within a collaborative engineering environment
This role is unable to offer sponsorship, full UK working rights required.
Relocation assistance can be offered for this role.
How to Apply
To apply for the Graduate Component Engineer role based in Clacton-on-Sea, please submit a copy of your CV today. ....Read more...
Type: Permanent Location: Clacton-On-Sea, England
Start: ASAP
Salary / Rate: £27000 - £29500 per annum
Posted: 2026-03-12 12:18:54
-
A Graduate Component Engineer is sought to join an innovative engineering team in Clacton, Essex, contributing to the selection, qualification, and lifecycle management of electronic components used across hardware designs.
The Graduate Component Engineer, Clacton, Essex, will be expected to develop your understanding in the field, learning from peers and senior engineers in technical areas and industry best practices.
This may include component selection processes, BOM management, lifecycle monitoring, compliance standards, and exposure to hardware design and testing activities used in production and supplier environments.
Responsibilities include:
Work with hardware design, manufacturing, quality and procurement teams to define component specifications and selection criteria.
Create and maintain component libraries, supporting schematic capture and PCB layout activities.
Develop and execute component evaluations, including parametric comparisons, second-source identification, and suitability assessments.
Debug and validate electronic component performance through testing and evaluation activities to ensure compliance with design requirements.
Collaborate with procurement and suppliers to gather technical data, availability information and lifecycle status updates.
Maintain comprehensive technical documentation, including BOM generation, BOM risk assessments and lifecycle tracking (NRND, LTB, EOL).
Support production and engineering teams with component-related technical queries and assist with quality system audits.
Key skills & experience:
Degree in Electronic Engineering or a closely related discipline, or equivalent industry experience.
Proficiency with schematic capture and PCB layout tools.
Practical experience working with BOMs, component datasheets and spreadsheets.
Strong problem-solving and analytical skills.
Effective communication and teamwork abilities, with excellent attention to detail.
How to apply:
Apply now for the Graduate Component Engineer role in Clacton, Essex.
Please apply with a copy of your CV! ....Read more...
Type: Permanent Location: Clacton-On-Sea, England
Start: ASAP
Salary / Rate: £27000 - £29500 per annum
Posted: 2026-03-12 12:14:55
-
A Graduate Electronics Design Engineer is required to join an innovative and forward-thinking engineering team based in Clacton-on-Sea.
This is an exciting opportunity for a graduate engineer to begin their career within a collaborative environment, contributing to the design, development, and validation of high-performance electronic hardware solutions across the full product lifecycle.
As a Graduate Electronics Design Engineer, you will work alongside experienced engineers who will support your professional development while exposing you to industry best practices and real-world engineering challenges.
You will gain hands-on experience across multiple areas of hardware design including product specification, schematic capture, PCB layout, prototype validation, hardware debugging, and cross-functional collaboration within a dynamic engineering team.
Responsibilities for this Graduate Electronics Design Engineer based in Clacton-on-Sea:
Work closely with Product Management to help define product and design specifications
Support and lead elements of product update and validation projects under the guidance of senior engineers
Produce detailed schematics and PCB layouts using Altium Designer
Develop and execute test plans for prototypes and production-ready hardware
Debug and troubleshoot hardware using laboratory equipment such as oscilloscopes and digital multimeters
Collaborate with mechanical and software teams to ensure seamless hardware and software integration
Key Skills & Experience for this Graduate Electronics Design Engineer based in Clacton-on-Sea:
Degree in Electronic Engineering or a closely related discipline
Experience with schematic capture and PCB layout tools
Hands-on experience using laboratory test equipment such as oscilloscopes and multimeters
Strong problem-solving skills and a proactive approach to learning and development
This role cannot offer sponsorship, therefore full UK working rights are required.
Relocation assistance may be available for the right candidate.
How to Apply
To apply for this Graduate Hardware Design Engineer role based in Clacton-on-Sea, please submit your CV today. ....Read more...
Type: Permanent Location: Clacton-On-Sea, England
Start: ASAP
Salary / Rate: £28000 - £30000 per annum
Posted: 2026-03-12 12:12:32
-
An exciting opportunity has arisen for a SMT Engineer based in Nottingham to join a world leading Engineering and Manufacturing company.
This is a fantastic chance to join a company developing lifesaving, safety critical equipment.
You will be responsible for low power, safety critical hardware to work with new and existing products, which are installed in hazardous areas.
You will lead and implement new design from initial concept though to launch.
The successful candidate for the SMT Engineer job based in Nottingham will have a strong background in, SMT, PCB and Final Product Assembly processes and techniques, have a good knowledge of modern manufacturing techniques including, OPF, Lean and 5S, also have a relevant degree or equivalent qualifications and also a strong working knowledge of electronic assembly and processes including IPC-A-610 and J-STD-001.
Ideally you will have experience leading a team and working with SMT machines and strong man-management skills.
This is a unique opportunity to join a leader in their market who can offer the opportunity for career progression and personal development, joining a well-established manufacturing site in Nottingham.
To apply for this SMT Engineer, based in Nottingham, please send your CV and covering letter to Rwilcocks@redlinegroup.Com, or for more information contact Ricky Wilcocks on 01582 878810. ....Read more...
Type: Permanent Location: Nottingham, England
Start: ASAP
Salary / Rate: £35000 - £42000 per annum
Posted: 2026-03-12 10:12:16
