-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and offers constructive criticisms relative to variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Consult with Main Lab chemist on products more than 10% out of product specifications Upon approval of product record data onto Quality Control car and enter information into computer data base Consult QC manual for specific requirements for product analysis of production batches and customers special requirements Calibrate QC equipment as required Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude. Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2025-03-20 06:21:01
-
JOB DESCRIPTION
Essential Functions & Responsibilities
Executes tasks of quality control testing, including analyzing, recording and reporting accurate results in a timely fashion. Communicates results with the Process Chemist and if directed, Plant Operators/Supervisor.
Participates in R&D & technical services projects to include gathering necessary raw materials / intermediates.
Assists when requested in testing of materials being worked on related to R&D or Process Improvement • Collects and prepares high quality, accurate samples for customers and prepares for shipment. Maintains clean and organized lab work area. As directed, manages lab chemical inventory and stock /storage room re-organization.
Participates in all environmental and safety training as required by Federal, State, County, and Local regulations as well as company policies.
Suggests improvements for safety and compliance.
Promptly reports any safety incidents and participates in incident investigations as requested. Additional duties may be added or removed as management requires.
Placement Criteria:
Minimum education and practical work experience: bachelor's degree in chemistry, biology or related field and 1-5 years' experience working in an analytical lab or similar position, or a suitable combination of education and relevant experience. Specialized technical/aptitude experience: minimum of 1-5 years' experience and demonstrated knowledge and proficiency with gravimetric and analytic techniques. Extensive knowledge of commonly-used concepts, practices, and procedures within the chemical manufacturing industry; previous work and/or substantial knowledge of, including commonlyused concepts, practices, and procedures, within in the thermoset polymer industry is a strongly considered asset.
Demonstrated ability to prioritize workflow and organize diverse material and ability to handle multiple, competing and changing priorities; ability to perform effectively and problem solve without supervision and within established time limits and ongoing deadlines. Ability to interact and communicate effectively and professionally verbally and in writing, and to provide exceptional service internally and externally. Relevant computer skills for this position include knowledge and experience with Microsoft Office applications and instrumental software.
Experience with SAGE Platinum for Windows is preferred. Displays adaptability in learning the use of relevant software and displays comprehension of fundamental computer practices and database management. Apply for this ad Online! ....Read more...
Type: Permanent Location: Richmond, Missouri
Posted: 2025-03-20 06:20:42
-
JOB DESCRIPTION
Essential Functions & Responsibilities
Executes tasks of quality control testing, including analyzing, recording and reporting accurate results in a timely fashion. Communicates results with the Process Chemist and if directed, Plant Operators/Supervisor.
Participates in R&D & technical services projects to include gathering necessary raw materials / intermediates.
Assists when requested in testing of materials being worked on related to R&D or Process Improvement • Collects and prepares high quality, accurate samples for customers and prepares for shipment. Maintains clean and organized lab work area. As directed, manages lab chemical inventory and stock /storage room re-organization.
Participates in all environmental and safety training as required by Federal, State, County, and Local regulations as well as company policies.
Suggests improvements for safety and compliance.
Promptly reports any safety incidents and participates in incident investigations as requested. Additional duties may be added or removed as management requires.
Placement Criteria:
Minimum education and practical work experience: bachelor's degree in chemistry, biology or related field and 1-5 years' experience working in an analytical lab or similar position, or a suitable combination of education and relevant experience. Specialized technical/aptitude experience: minimum of 1-5 years' experience and demonstrated knowledge and proficiency with gravimetric and analytic techniques. Extensive knowledge of commonly-used concepts, practices, and procedures within the chemical manufacturing industry; previous work and/or substantial knowledge of, including commonlyused concepts, practices, and procedures, within in the thermoset polymer industry is a strongly considered asset.
Demonstrated ability to prioritize workflow and organize diverse material and ability to handle multiple, competing and changing priorities; ability to perform effectively and problem solve without supervision and within established time limits and ongoing deadlines. Ability to interact and communicate effectively and professionally verbally and in writing, and to provide exceptional service internally and externally. Relevant computer skills for this position include knowledge and experience with Microsoft Office applications and instrumental software.
Experience with SAGE Platinum for Windows is preferred. Displays adaptability in learning the use of relevant software and displays comprehension of fundamental computer practices and database management. Apply for this ad Online! ....Read more...
Type: Permanent Location: Richmond, Missouri
Posted: 2025-03-20 06:17:52
-
JOB DESCRIPTION
The Senior R&D Scientist will demonstrate and apply the following skills to their work and has a proven track record of performing this consistently.
Understanding of Scientific Methodology.
Hypothesis driven research and problem-solving capability using experimental design, data analysis and documentation. H&I Cleaning Formulation Science: Surfactants, solvents, chelating agents, builders, enzymes, fragrances, additives, and preservatives Strong analytical science and material science understanding with an emphasis on structure-property relationship Apply expert knowledge of organic chemistry and synthesis to troubleshoot complex formulation issues, enhance product performance, and ensure product stability and safety.
Technical Leadership:
Ability to develop and implement project plans with proven technical leadership, technically guiding complex R&D projects and team members Ability to generate accurate timelines, time management, prioritization, and resource utilization, while measuring progress and providing updates in alignment with our marketing team Ability to make strategic decisions both technically as well as guide staff utilization, advising leaders and scientists to execute initiatives while managing business strategy and value creation Outstanding verbal and written technical communication, interpersonal communication and presentation skills. Has a plan and executes for innovation.
Skillset and track record in identifying and scouting new and innovative ideas. Continuous learning and intimate awareness of open literature and competitive landscape The Senior R&D Scientist works with assistance on the allocation of resources towards initiatives by working with leadership The Senior R&D Scientist demonstrates the ability to have influence in decision making and a demonstrated ability to communicate with project stakeholders and cross-functional teams, leadership and external scientific community.
Organization Leadership:
The Senior R&D Scientist demonstrates and applies the following attributes Continuous learning, growth mentorship, and teaching skills.
This candidate must have a willingness to develop others and work with R&D management to help refine and develop the skillsets of the team. Agility to respond to emerging business needs - strong management of change skills Builds strong partnerships internally within R&D, internal functions (marketing, manufacturing, sourcing, etc.) and externally (vendors, customers, etc.) Managing high stakes and challenging situation with all levels of organizations Using, assessing the organizational processes and developing new processes to improve efficiency and quality Outstanding presentation skills Demonstrate strong career ambition - potential to become top leader Strong business acumen
Education Guidelines
BS in Chemistry, Chemical Engineering, Materials, or other equivalent scientific field required MS or PhD strongly preferred Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.
ABOUT US
Solving challenges is the very foundation of who we are.
After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint.
When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution.
Today, that discovery is Rust-Oleum Corporation.
The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today.
When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry.
Our creative and talented team of over 3000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin
Posted: 2025-03-20 06:12:54
-
JOB DESCRIPTION
R&D Scientist position for the Analytical and Physical Chemistry team requires strong technical knowledge with experience in the practical application of Rheology and Dynamic Mechanical Analysis to coatings.
Innovation and experience in analysis of coatings or resins, is desired.
This position provides leadership to internal research, and development, product development, and synthesis.
The candidate must also possess demonstrated competencies and experiences in project management, documentation, and communication.
Technology Knowledge:
Experience with viscoelastic or rheology theory and application.
With a demonstrated practical application of concepts.
Required concepts; Dynamic Mechanical Analysis, Rheology, structure property relationship, coatings properties, and polymer properties, Desired concepts; DSC, Tg, polymer and coating property relationships, test method design, statistical correlation studies, Ability to validate or demonstrate concepts and research.
Knowledge of property testing and linking results to consumer impact.
Ability to document procedures, processes, and outcome in detail for ultimate technology transfer package generation Working knowledge of various suppliers for required equipment. Understanding of DOE and statistical analysis to provide highest quality data
Technical Leadership:
Action Oriented - ability to make technical decisions as needed for experimental testing and design Continuous learning and awareness of open literature and competitive landscape, as well as most current developments to leverage Demonstrated ability to develop and execute project plan - time management, prioritization, managing ongoing progress of project work to completion Demonstrated ability to regularly communicate status and results with project stakeholders and cross-functional teams Demonstrates courage through proposed system upgrades and improved technology; always improving
People Leadership:
Outstanding personal and interpersonal skills - listening, compassion, motivating, inspiring, humor, patience, understanding diversity, negotiating etc. Energetic, driving and inspiring Action oriented, perseverance and results driven Continuous learning/growth and mentorship/teaching skills Shared knowledge and learnings among coworkers for broader impact to RO
Organization Leadership:
Ability to work and thrive in cross-functional environment.
Agility to respond to emerging business needs Using, assessing, or developing organization technology and developing improved technology or processes. Demonstrate strong technical ambition - potential to become senior technical SME
Experience and Education:
Preferred minimum 4-6 years experience primarily doing coatings or material science research, testing and/or development B.S.
Degree in material science, chemistry, or related field.
Masters or PHD preferred. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin
Posted: 2025-03-20 06:12:41
-
Quality / Governance & Risk ManagerFull-time, 37.5 hours per week, 9am to 5.30pmHybrid - min 3 days on siteLocation: LondonSalary: up to £65kWe are looking for an experienced Quality /Governance & Risk Manager to join a growing and highly skilled team at a leading healthcare provider with over 35 years of expertise in delivering top-tier pathology services across a variety of care settings.The team plays a vital role in supporting pathology / laboratory services such as acute care, IVF, healthcare screening, insurance work, and GP services.
The laboratory spans multiple disciplines, including allergy, biochemistry, endocrinology, haematology, blood transfusion, histopathology, cytology, immunology, and microbiology, all supported by cutting-edge analytical technology.What we're looking for:
Solid experience in leading a team within quality management ideally in a laboratory / pathology environment
Extensive experience in risk management and laboratory health and safety.
Microbiology experience would be preferable - ideally across multiple disciplines (although this is not essential)
In-depth knowledge of ISO15189, ISO15190, and ISO22367 standards.
IBMS qualifications
Masters degree essential
Qualification in Quality management
HCPC registration desirable but not essential
Fantastic, extensive benefits package available.This role offers the opportunity to make a meaningful impact within a high-performing team.
If you're passionate about driving quality, governance and risk management practices in a laboratory setting, we'd love to hear from you!Please apply with your CV or you can email for more information!
....Read more...
Type: Permanent Location: London, England
Salary / Rate: Up to £65000 per annum
Posted: 2025-03-14 11:55:15
-
We are looking for a Laboratory Technician with expertise in fluid analysis and a passion for data science.
This role combines hands-on laboratory work with advanced data analysis and visualisation using Power BI.
You will be working with ICP-AES, HPLC, and other analytical techniques to assess the composition of fluids such as oil, grease, and coolant while ensuring compliance with Good Laboratory Practice (GLP) standards.
Key Responsibilities:
Conduct chemical and biochemical analyses using techniques like ICP-AES and HPLC.
Apply Good Laboratory Practice (GLP) to ensure accuracy and reliability of results.
Analyse fluid samples (oil, grease, coolant) to assess their chemical composition.
Use Power BI to create data visualisations and generate insights from laboratory results.
Develop expertise in health data science, business intelligence, and advanced analytics.
Key Skills:
Laboratory skills and experience in analytical chemistry.
Understanding of fluid chemistry and its industrial applications.
Critical thinking and problem-solving abilities.
Interest in data science
Knowledge of Power BI (or willingness to learn). ....Read more...
Type: Permanent Location: Nottingham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £24000 - £30000 Per Annum None
Posted: 2025-03-11 16:05:04
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: Ensures that the assigned revenue, margin and product mix objectives, within the corporate business framework, are met or exceeded.
This is to be accomplished by securing, developing, and managing key architects, designers, general contractors, distributors, subcontractors, and end-user accounts.
This position will also own and manage all related performance and service metrics for the assigned accounts.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Achieves or exceeds assigned sales goals and expectations.
Works primarily with existing accounts, while seeking and developing new account opportunities to influence and increase use of Tremco CPG products in assigned territory.
Manages assigned accounts to establish business development opportunities through account penetration, analysis, partnership with key decision makers, and strategic initiatives.
Drives product specifications and project opportunities throughout assigned territory.
Leverages industry knowledge, marketplace dynamics and key relationships both internally and externally to develop trusted partnerships and advisory relationships with customers with a focus on problem identification, exploration and resolution.
Annually prepares and delivers strategic business/territory plans for each customer with monthly forecasts.
Consistently and efficiently follows the standard sales process to identify prospects and decision makers, gain customer commitment, predict sales probability, and effectively close deals.
Manages day-to-day contact, exchanges information succinctly, truthfully and ethically while addressing issues directly and tactfully in pursuit of mutual interest and benefit.
Develops and delivers technical, high quality and directed digital collateral, product prospectus, presentations, and business correspondence in support of the overall sales process.
Independently coordinates and executes product knowledge training sessions with internal and external customers, as appropriate, utilizing supplier representatives.
Leverages all available technology on a daily basis for productivity and effective lead generation, account maintenance, sales and expense tracking, forecasting, account reviews, customer contact, presentations, etc.
Works collaboratively with internal support resources to develop teamwork through cooperation, trust and mutual respect.
Attends and presents business unit products and services at industry conventions and trade shows.
Maintains extensive product knowledge in all product lines and service offerings.
Adheres to and enforces all company policies, pricing, and operational procedures with special attention to the professional image of the company.
Performs other related duties as required, requested or assigned.
EDUCATION REQUIREMENT:
Bachelor's Degree in Business, Sales, Construction Management and 2-3 years of construction or industry experience OR Minimum High School Diploma or GED with 5 years of construction or industry experience
EXPERIENCE REQUIREMENT:
Must have 4-7 years of hands-on, sales account management experience preferably in the construction industry Construction knowledge (i.e., waterproofing, air barriers, framing, modular, etc.) Knowledge of the local marketplace dynamics and competitive products and landscape Basic knowledge of product chemistries as it relates to adhesives, coatings, and sealants.
CERTIFICATES, LICENSES, REGISTRATIONS:
Valid Driver's license, statutory automobile insurance with reliabletransportation 10-hour OSHA Safety Card or equal in Canada
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Handles moderately complex issues and problems, consistently brings solutions when seeking guidance from higher level colleagues for more complex issues.
Consistently leverages internal network and resources/channels effectively.
Pursues multiple perspectives to find solutions; sees hidden problems and probes the correct sources for answers.
Ability to travel extensivelywithin assigned territory.
Must be well organized,self-motivated, with outstandingwritten and verbalcommunication skills, listening and presentation skills.
Demonstrate core sales competencies (i.e., account development, value-selling, closing new business, etc.) Proven ability to understand, use, and manage your own emotions in positive ways to relieve stress, communicate effectively, empathize with others, overcome challenges and diffuse conflict.
Demonstrates self-awareness and emotional self-control through adaptability, achievement orientation, and a positive outlook.
Ability to accept and utilize feedback effectively and constructively.
Ability to read an audience and adjust style and approach accordingly.
Ability to build relationships and deliver exceptional customer service.
Understand basic accounting principles and pricing calculations Possesses good analytical and problem-solving skills with the ability to define and analyze basic problems, ask penetrating questions, see hidden patterns, and develop solutions.
Efficiently uses resources Expertise with Microsoft Office Suite (Word, Excel, PowerPoint) and Salesforce.com or other CRM software experience required.
Ability to use technology to effectively orchestrate and manage virtual/remote meetings and presentations.
Suitable home office or workspace to conduct work.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The salary range for applicants in this position is based on employee qualifications, business needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbia, South Carolina
Posted: 2025-03-10 22:06:08
-
Quality / Governance & Risk Manager Full-time, 37.5 hours per week, 9am to 5.30pm Hybrid - min 3 days on site Location: London Salary: up to £65kWe are looking for an experienced Quality /Governance & Risk Manager to join a growing and highly skilled team at a leading healthcare provider with over 35 years of expertise in delivering top-tier pathology services across a variety of care settings. The team plays a vital role in supporting pathology / laboratory services such as acute care, IVF, healthcare screening, insurance work, and GP services.
The laboratory spans multiple disciplines, including allergy, biochemistry, endocrinology, haematology, blood transfusion, histopathology, cytology, immunology, and microbiology, all supported by cutting-edge analytical technology.What we're looking for:
Solid experience in leading a team within quality management ideally in a laboratory / pathology environment
Extensive experience in risk management and laboratory health and safety.
Microbiology experience would be preferable - ideally across multiple disciplines (although this is not essential)
In-depth knowledge of ISO15189, ISO15190, and ISO22367 standards.
IBMS qualifications
Masters degree essential
Qualification in Quality management
HCPC registration desirable but not essential
Fantastic, extensive benefits package available.This role offers the opportunity to make a meaningful impact within a high-performing team.
If you're passionate about driving quality, governance and risk management practices in a laboratory setting, we'd love to hear from you!Email or call: 07587 697411 ....Read more...
Type: Permanent Location: London, England
Salary / Rate: Up to £65000 per annum
Posted: 2025-03-07 10:44:26
-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and offers constructive criticisms relative to variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Consult with Main Lab chemist on products more than 10% out of product specifications Upon approval of product record data onto Quality Control car and enter information into computer data base Consult QC manual for specific requirements for product analysis of production batches and customers special requirements Calibrate QC equipment as required Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude. Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2025-03-05 22:08:00
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: Ensures that the assigned revenue, margin and product mix objectives, within the corporate business framework, are met or exceeded.
This is to be accomplished by securing, developing, and managing key architects, designers, general contractors, distributors, subcontractors, and end-user accounts.
This position will also own and manage all related performance and service metrics for the assigned accounts.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Achieves or exceeds assigned sales goals and expectations.
Works primarily with existing accounts, while seeking and developing new account opportunities to influence and increase use of Tremco CPG products in assigned territory.
Manages assigned accounts to establish business development opportunities through account penetration, analysis, partnership with key decision makers, and strategic initiatives.
Drives product specifications and project opportunities throughout assigned territory.
Leverages industry knowledge, marketplace dynamics and key relationships both internally and externally to develop trusted partnerships and advisory relationships with customers with a focus on problem identification, exploration and resolution.
Annually prepares and delivers strategic business/territory plans for each customer with monthly forecasts.
Consistently and efficiently follows the standard sales process to identify prospects and decision makers, gain customer commitment, predict sales probability, and effectively close deals.
Manages day-to-day contact, exchanges information succinctly, truthfully and ethically while addressing issues directly and tactfully in pursuit of mutual interest and benefit.
Develops and delivers technical, high quality and directed digital collateral, product prospectus, presentations, and business correspondence in support of the overall sales process.
Independently coordinates and executes product knowledge training sessions with internal and external customers, as appropriate, utilizing supplier representatives.
Leverages all available technology on a daily basis for productivity and effective lead generation, account maintenance, sales and expense tracking, forecasting, account reviews, customer contact, presentations, etc.
Works collaboratively with internal support resources to develop teamwork through cooperation, trust and mutual respect.
Attends and presents business unit products and services at industry conventions and trade shows.
Maintains extensive product knowledge in all product lines and service offerings.
Adheres to and enforces all company policies, pricing, and operational procedures with special attention to the professional image of the company.
Performs other related duties as required, requested or assigned.
EDUCATION REQUIREMENT:
Bachelor's Degree in Business, Sales, Construction Management and 2-3 years of construction or industry experience OR Minimum High School Diploma or GED with 5 years of construction or industry experience
EXPERIENCE REQUIREMENT:
Must have 4-7 years of hands-on, sales account management experience preferably in the construction industry Construction knowledge (i.e., waterproofing, air barriers, framing, modular, etc.) Knowledge of the local marketplace dynamics and competitive products and landscape Basic knowledge of product chemistries as it relates to adhesives, coatings, and sealants.
CERTIFICATES, LICENSES, REGISTRATIONS:
Valid Driver's license, statutory automobile insurance with reliabletransportation 10-hour OSHA Safety Card or equal in Canada
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Handles moderately complex issues and problems, consistently brings solutions when seeking guidance from higher level colleagues for more complex issues.
Consistently leverages internal network and resources/channels effectively.
Pursues multiple perspectives to find solutions; sees hidden problems and probes the correct sources for answers.
Ability to travel extensivelywithin assigned territory.
Must be well organized,self-motivated, with outstandingwritten and verbalcommunication skills, listening and presentation skills.
Demonstrate core sales competencies (i.e., account development, value-selling, closing new business, etc.) Proven ability to understand, use, and manage your own emotions in positive ways to relieve stress, communicate effectively, empathize with others, overcome challenges and diffuse conflict.
Demonstrates self-awareness and emotional self-control through adaptability, achievement orientation, and a positive outlook.
Ability to accept and utilize feedback effectively and constructively.
Ability to read an audience and adjust style and approach accordingly.
Ability to build relationships and deliver exceptional customer service.
Understand basic accounting principles and pricing calculations Possesses good analytical and problem-solving skills with the ability to define and analyze basic problems, ask penetrating questions, see hidden patterns, and develop solutions.
Efficiently uses resources Expertise with Microsoft Office Suite (Word, Excel, PowerPoint) and Salesforce.com or other CRM software experience required.
Ability to use technology to effectively orchestrate and manage virtual/remote meetings and presentations.
Suitable home office or workspace to conduct work.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The salary range for applicants in this position is based on employee qualifications, business needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Tempe, Arizona
Posted: 2025-03-05 22:07:43
-
JOB DESCRIPTION
Euclid Chemical is a fully owned subsidiary of RPM International (NYSE: RPM), one of the world's largest coatings companies.
With over 110 years of experience, we provide innovative solutions to the construction and restoration markets through our extensive range of treatments, sealants, coatings, sealers, and decorative products.
Recognized as a 2024 NE Ohio Top Workplace by Energage, Euclid Chemical prides itself on fostering a people-first culture that values collaboration, respect, and growth.
Summary: The Cement Additives Process Engineer plays a pivotal role in driving business growth and profitability through strategic technical support and contribution to the sales process.
This position is tasked with providing technical support and expertise of the cement manufacturing process to our cement additive sales team and customers.
Proficiency in this role requires exceptional cement manufacturing, analytical, and communication skills to collaborate seamlessly with internal teams at Euclid Chemical and build strong, lasting relationships with external cement customers - both active and potential customers.
This is a remote position, with Euclid Chemical's main campus located in Ceveland, OH.
Responsibilities:
Serve as a technical ambassador for the Euclid Chemical cement additive sales team. Subject matter expert to provide feedback and troubleshooting information for customers. Act as a technical expert on the latest cement manufacturing technologies, equipment, and best practices to maintain Euclid Chemical's competitive edge. Deliver customer support through industrial trials, mill audits, special projects, data analysis, and detailed reporting to retain existing customers and attract new ones Compile and analyze industrial trial process data, and prepare detailed reports providing conclusions and action items from industrial trial runs. Keep thorough and updated records of activity history with active and potential cement additive customers. Design and execution of plant industrial trials and mill audits. Maintenance and operation of portable pump equipment inventory to utilize during industrial trials. Collaborate with the Cement Additives Technical Manager and Cement Lab Manager to develop new products and enhance existing lines based on market trends, competitive analysis, and industrial trial results. Work collaboratively with Euclid Chemical Cement Additives Lab team in the development and improvement of laboratory ball mill methodologies for testing materials.
Education and Experience:
Bachelor's degree in engineering (chemical or mechanical) or chemistry - master's degree is preferred. Minimum of 5-7 years of experience in cement manufacturing process control or quality management.
Skills and Qualifications:
Advanced knowledge and understanding of cement manufacturing, cement chemistry, and raw and finish mill circuit operation. Basic understanding of cement additives chemistries. Ability to interpret lab outputs (e.g., XRD, clinker microscopy, isothermal calorimetry, and physical test results) to develop customer-specific strategies and product recommendations. Proficiency with cement standards (ASTM, CSA, etc.). Strong knowledge of milling equipment, particle classifiers, circuit configurations, and pyro processes for optimizing clinker performance. Advanced knowledge of MS Office computer software: Excel, PowerPoint, Word.
Basic knowledge of MS Outlook, Teams, Edge Internet Browser. Knowledge of industry trends, including low clinker content cement production and co-grinding with alternative materials. Data analysis and report writing skills. Communication and interpersonal skills. Leadership and team management capabilities. Analytical and problem-solving abilities. The ability to design and execute plant industrial trials and mill audits.
Travel:
Willingness to travel as needed for customer meetings and plant industrial trials (up to 50%).
Why join our team? Euclid Chemical offers an attractive package for personnel, company benefits include but are not limited to:
Medical, Dental and Vision coverage Life Insurance Short Term/Long Term Disability Parental Leave 401k with company match Defined benefit pension plan Vacation and holiday time A company vehicle or car allowance
Salary Range: $110,000 - $125,000 plus annual company bonus program
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-03-03 14:07:07
-
JOB DESCRIPTION
R&D Scientist position for the Analytical and Physical Chemistry team requires strong technical knowledge with experience in the practical application of Rheology and Dynamic Mechanical Analysis to coatings.
Innovation and experience in analysis of coatings or resins, is desired.
This position provides leadership to internal research, and development, product development, and synthesis.
The candidate must also possess demonstrated competencies and experiences in project management, documentation, and communication.
Technology Knowledge:
Experience with viscoelastic or rheology theory and application.
With a demonstrated practical application of concepts.
Required concepts; Dynamic Mechanical Analysis, Rheology, structure property relationship, coatings properties, and polymer properties, Desired concepts; DSC, Tg, polymer and coating property relationships, test method design, statistical correlation studies, Ability to validate or demonstrate concepts and research.
Knowledge of property testing and linking results to consumer impact.
Ability to document procedures, processes, and outcome in detail for ultimate technology transfer package generation Working knowledge of various suppliers for required equipment. Understanding of DOE and statistical analysis to provide highest quality data
Technical Leadership:
Action Oriented - ability to make technical decisions as needed for experimental testing and design Continuous learning and awareness of open literature and competitive landscape, as well as most current developments to leverage Demonstrated ability to develop and execute project plan - time management, prioritization, managing ongoing progress of project work to completion Demonstrated ability to regularly communicate status and results with project stakeholders and cross-functional teams Demonstrates courage through proposed system upgrades and improved technology; always improving
People Leadership:
Outstanding personal and interpersonal skills - listening, compassion, motivating, inspiring, humor, patience, understanding diversity, negotiating etc. Energetic, driving and inspiring Action oriented, perseverance and results driven Continuous learning/growth and mentorship/teaching skills Shared knowledge and learnings among coworkers for broader impact to RO
Organization Leadership:
Ability to work and thrive in cross-functional environment.
Agility to respond to emerging business needs Using, assessing, or developing organization technology and developing improved technology or processes. Demonstrate strong technical ambition - potential to become senior technical SME
Experience and Education:
Preferred minimum 4-6 years experience primarily doing coatings or material science research, testing and/or development B.S.
Degree in material science, chemistry, or related field.
Masters or PHD preferred. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin
Posted: 2025-03-03 14:06:50
-
JOB DESCRIPTION
Euclid Chemical is a fully owned subsidiary of RPM International (NYSE: RPM), one of the world's largest coatings companies.
With over 110 years of experience, we provide innovative solutions to the construction and restoration markets through our extensive range of treatments, sealants, coatings, sealers, and decorative products.
Recognized as a 2024 NE Ohio Top Workplace by Energage, Euclid Chemical prides itself on fostering a people-first culture that values collaboration, respect, and growth.
Summary: The Cement Additives Process Engineer plays a pivotal role in driving business growth and profitability through strategic technical support and contribution to the sales process.
This position is tasked with providing technical support and expertise of the cement manufacturing process to our cement additive sales team and customers.
Proficiency in this role requires exceptional cement manufacturing, analytical, and communication skills to collaborate seamlessly with internal teams at Euclid Chemical and build strong, lasting relationships with external cement customers - both active and potential customers.
Responsibilities:
Serve as a technical ambassador for the Euclid Chemical cement additive sales team. Subject matter expert to provide feedback and troubleshooting information for customers. Act as a technical expert on the latest cement manufacturing technologies, equipment, and best practices to maintain Euclid Chemical's competitive edge. Deliver customer support through industrial trials, mill audits, special projects, data analysis, and detailed reporting to retain existing customers and attract new ones Compile and analyze industrial trial process data, and prepare detailed reports providing conclusions and action items from industrial trial runs. Keep thorough and updated records of activity history with active and potential cement additive customers. Design and execution of plant industrial trials and mill audits. Maintenance and operation of portable pump equipment inventory to utilize during industrial trials. Collaborate with the Cement Additives Technical Manager and Cement Lab Manager to develop new products and enhance existing lines based on market trends, competitive analysis, and industrial trial results. Work collaboratively with Euclid Chemical Cement Additives Lab team in the development and improvement of laboratory ball mill methodologies for testing materials.
Education and Experience:
Bachelor's degree in engineering (chemical or mechanical) or chemistry - master's degree is preferred. Minimum of 5-7 years of experience in cement manufacturing process control or quality management.
Skills and Qualifications:
Advanced knowledge and understanding of cement manufacturing, cement chemistry, and raw and finish mill circuit operation. Basic understanding of cement additives chemistries. Ability to interpret lab outputs (e.g., XRD, clinker microscopy, isothermal calorimetry, and physical test results) to develop customer-specific strategies and product recommendations. Proficiency with cement standards (ASTM, CSA, etc.). Strong knowledge of milling equipment, particle classifiers, circuit configurations, and pyro processes for optimizing clinker performance. Advanced knowledge of MS Office computer software: Excel, PowerPoint, Word.
Basic knowledge of MS Outlook, Teams, Edge Internet Browser. Knowledge of industry trends, including low clinker content cement production and co-grinding with alternative materials. Data analysis and report writing skills. Communication and interpersonal skills. Leadership and team management capabilities. Analytical and problem-solving abilities. The ability to design and execute plant industrial trials and mill audits.
Travel:
Willingness to travel as needed for customer meetings and plant industrial trials (up to 50%).
Why join our team? Euclid Chemical offers an attractive package for personnel, company benefits include but are not limited to:
Medical, Dental and Vision coverage Life Insurance Short Term/Long Term Disability Parental Leave 401k with company match Defined benefit pension plan Generous vacation and holiday time
Salary Range: $110,000 - $125,000 plus annual company bonus program
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-02-28 14:07:36
-
JOB DESCRIPTION
DAP is looking to hire R&D Intern for Summer 2025.
Responsibilities:
The summer intern would work under mentorship of a senior scientist / Supervisor to perform collaborative research for development adhesives or repair products with unique and differentiated properties.
The intern will work on Study effect of graphene on water resistance and tensile properties of adhesive, 2 weeks. Study effect of graphene on lap shear test and substrate of adhesive, 2 weeks. Study effect of graphene on rheology of adhesive, 2 weeks. Study effect of preparation method on performances of adhesive, 2 weeks. Validate and optimize for the most feasible formula in terms of performances and cost, 3 weeks. Review, prepare for final presentation, 1 week
Pay
$17 / hour.
Requirements
Currently pursuing a bachelor's degree in chemistry, materials science, polymer science, or related discipline from an accredited institution with a total GPA of 3.0 or higher. Completed a minimum of 4 semesters by the start of the internship. Available to work the entirety of the 12-week summer internship program in 2025. 6-12 months of practical laboratory experience in polymers, chemical/polymer processing, advanced analytical and materials characterization. Previous relevant intern experience or co-op with company or university. Use of designed experiments and statistical analysis of experimental results. Demonstrated scientific and technical acumen, with ability to make connections between science/technology and real-world concerns. Strong problem-solving skills. Ability to deal with the ambiguity as it relates to technical problems and experimentation. Demonstrated scientific excellence as evidenced by publications and presentations. Self-motivated and self-directed
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world. At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Baltimore, Maryland
Posted: 2025-02-27 14:07:11
-
Senior Materials Scientist - Novel characterisation
A pioneer of cutting-edge instrumentation in Cambridge are looking for an experienced materials scientist to join their research group.
As a Materials Scientist, you will be charged with providing multi-instrumental characterisation data together with high quality analysis, interpretation, and reporting with particular emphasis on the purity analysis and characterisation of materials by liquid chromatography techniques, including LC-MS and HPLC.
This all aims to improve current characterisation methods and provide scientific structure property correlations.
This includes the development of new test methodologies, characterisation of both novel and known small molecule and polymer systems and the successful evaluation of new techniques to improve current characterisation methods from concept to delivery.
This means that you will be able to make a significant impact with you work.
To be considered for this role we are ideally looking for people with the following attributes;
Proven expertise in the characterisation of materials and identifying impurities by liquid chromatographic techniques, including LC-MS and HPLC.
Demonstrable experience of detailed interpretation of analytical chemistry results and data to draw clear conclusions and recommendations
Strong academic record with a materials focus
Naturally inquisitive mindset
In exchange for your skills and expertise, the company offer a highly competitive package as well as providing excellent career progression within an innovative environment.
For more information, please call Matthew Lowdon of Newton Colmore Consulting on 0121 268 2240 or make an application and one of our team will be in touch.
Newton Colmore Consulting is a specialist talent acquisition consultancy operating within the medical devices and biotechnology sectors.
We have over ten years worth of expertise of placing candidates with our clients, globally.
Our sole aim is to utilise this expertise and knowledge to maximise your chances of securing your ideal role with our clients.
....Read more...
Type: Permanent Location: Cambridge, England
Posted: 2025-02-27 12:29:29
-
ROLE OVERVIEW
We are currently looking for a Quality Control Analyst to join a leading manufacturing company based in the East Yorkshire area.
As the Lead Quality Control Analyst, you will be responsible for ensuring the highest standards of quality and process control for the site.
KEY DUTIES AND RESPONSIBILITIES:
Your duties as the Lead Quality Control Analyst will be varied however the key duties and responsibilities are as follows:
1.
Continuously plan, organise, and perform routine QC analysis of incoming material, in-process, and finished process samples in accordance with documented testing methodology.
2.
Make daily decisions on QC results, utilising problem-solving skills to ensure only accurate results are accepted, which could have a minor impact on the business.
3.
Proactively identify and initiate continuous improvements to products and systems used within QC.
4.
Carry out short-term projects involving non-routine analysis, including customer complaint investigations, which may require problem-solving based on vague information and knowledge of site products.
ROLE REQUIREMENTS:
To be successful in your application to this exciting role as the Lead Quality Control Analyst we are looking to identify the following on your profile and past history:
1.
Relevant degree in a scientific discipline.
2.
Proven industry experience in quality control or analytical chemistry.
3.
A working knowledge and practical experience with site analytical techniques such as titration, weighing, pipetting, making up reagents/standards, use of GC.
Key Words:
Quality Control / QC Analyst / Manufacturing / Process Control / Analytical Chemistry / Quality Assurance / Laboratory Analysis / Continuous Improvement / Calibration / Problem Solving ....Read more...
Type: Contract Location: Rawcliffe Bridge,England
Start: 27/02/2025
Duration: 6-12month
Salary / Rate: £23.84 per hour
Posted: 2025-02-27 11:38:13
