-
JOB DESCRIPTION
The Process Engineer will manage and commercialize new processes developed by the Research and Development department into full scale production within the Tremco Corsicana plant.
The Process Engineer will determine which equipment in the plant is most suited to make new products and what modifications may be necessary for such production to successfully occur. Over the next two years, the Tremco Corsicana facility will design, construct, and commission a new reactor.
This new major plant expansion will introduce new production capabilities to the Corsicana facility and is expected to serve as a model project for further plant modernization efforts.
The employee filling this role will lead this expansion project all the way through the commissioning and scaleup phases. In addition to supporting new products and plant expansions, this individual will also manage and optimize existing processes throughout the plant with the goals of maximizing yield and minimizing batch cycle times. SUMMARY OF JOB DUTIES: Safety The Process Engineer will actively participate in process safety reviews, and process hazards analysis as the technical representative. Must understand the hazards of the raw materials, processes, and products in order to develop a safe manufacturing process. Subject matter expert in wide range of chemical plant processes and systems.
Perform safety vent calculations for process upset conditions. Determine the correct control systems and interlocks to safely operate the process. Participate in plantwide process safety programs. LEAN Culture Use knowledge of existing processes to propose process modifications which will reduce waste. The Process Engineer, will be the technical consultant to the plant continuous improvement team. Understand the principle and philosophy behind the implementation of a LEAN culture. Product Quality Provide process knowledge to quality control department in order to troubleshoot quality issues. After developing a new process, coordinate the training of operators with a focus on quality critical product specifications, Standard Operating Procedures and process parameters. Productivity Use knowledge of the manufacturing process to improve productivity through elimination of non-value-added activities. Lead the effort to identify causes which result in productivity levels below the expected. Participate with maintenance in facility continuous improvement programs MINIMUM QUALIFICATIONS (special skills, knowledge, ability, education, etc.): Bachelor's degree from four-year College or university in Chemical Engineering.
6+ years related experience in Process Engineering in a manufacturing environment. Ability to comprehend and apply principles of advanced calculus, modern algebra, and advanced statistical theory.
Knowledge of SAP and demonstrated basic knowledge of Process Control Systems. Understand of plant operations Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents.
Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community.
Ability to write speeches and articles for publication that conform to prescribed style and format.
Ability to effectively present information to top management, public groups, and/or boards of directors. Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Ability to define problems, collect data, establish facts, and draw valid conclusions.
Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Must be literate in engineering, R&D, maintenance, quality, production, scheduling, forecasting, SAP, finance, EH&S, and will assist in plant management Process oriented Outside of the box thinking Business comprehension
BENEFITS AND COMPENSATION:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Corsicana, Texas
Posted: 2025-05-05 23:09:26
-
JOB DESCRIPTION
Employer Description
Legend Brands, an industry leader and long standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
Job Summary
Under general supervision, the Manufacturing Engineer (MfgE) I/II/Senior is responsible for developing, implementing, directing and coordinating manufacturing materials and processes to achieve the most efficient, cost effective and high-quality production possible in a safe and environmentally responsible manner.
The MfgE is responsible for leading the transition from new product development to manufacturing; providing daily manufacturing support for existing products; and leading implementation of design changes and quality improvements.
The MfgE works closely with all functional groups to develop robust, cost-effective manufacturing and assembly processes and related documentation for use throughout the manufacturing facility.
The MfgE drives continuous improvement and best practices by applying lean methods to eliminate waste in the value stream.
Supervision Responsibility
None
Essential Duties
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
Reasonable accommodations may be made to enable qualified individuals with a disability to perform the essential duties.
The list below is intended to be illustrative of the responsibilities of this position and is not all encompassing, nor does it constitute an employment agreement, and the duties may change at any time. Analyze, develop, and recommend design approaches to meet production requirements for new or improved products and/or processes using a Design for Manufacturing (DFM) and Design for Quality (DFQ) methods. Help coordinate manufacturing launch of new/revised products including tooling, equipment, methods and shop floor support. Create Engineering Change Orders (ECOs) and drawing package updates to support implementation of new product development efforts and changes to existing products. Specify/Design and coordinate fabrication of patterns, molds, fixtures, and gauges required in the manufacture of components and assemblies. Provide shop floor support, interfacing with other functional groups as required, to resolve processing issues with sound, lasting, corrective actions. Participate in "make/buy" decisions to determine the most cost-effective manner in which to manufacture hardware. Review new tooling (injection mold, vacuum form, and rotomold) packages to ensure all tooling meets part design and manufacturing requirements. Establish process control parameters and help to define Standard Work to optimize efficiency and First Pass Yield (FPY). Analyze space requirements and workflow, and design the layout of equipment and workstations to ensure maximum efficiency and an ergonomically sound work environment. Perform research and development of manufacturing processes including production flow, assembly methods and production equipment.
Conduct studies and evaluations aimed at developing new technologies to reduce cost/lead time, and improve quality/product flow Performs other related duties as assigned.
Minimum Qualifications
The requirements listed below are representative of the education, experience, certification and/or licensure required.
An equivalent combination of education and experience to perform the essential duties and meet the necessary employment standards may be considered.
Education and Experience
Bachelor's Degree in Manufacturing Engineering or Mechanical Engineering required. ________________________________________________________________________
Manufacturing Engineer II
This is the next level of the Manufacturing Engineer series and is required to have a minimum of 4 years of previous experience and working knowledge and competent demonstration of the following: Design for Manufacturing and Design for Quality in new products and changes to existing products to improve process efficiency, ergonomics, tooling/fixturing, etc. Ability to address issues in the manufacturing environment through development of process improvements Support new product development early in the product design phase to ensure DFM and DFQ are considered and implemented early in the project. Strong SolidWorks design and drawing package skills that meet project deadlines and internal/external customer needs. Demonstrated team leadership with strong communication skills. This level requires the following certifications: SolidWorks CAD Design Professional (CSWP) Manufacturing Engineer II perform broader range of duties, proven skillset to fully perform Manufacturing Engineer responsibilities, more technically complex tasks, expected to set an example of professional efficiency, and provide technical direction to less experienced staff.
May also operate more than one station. The Manufacturing Engineer II receives minimal instruction or assistance and is fully aware of the operating procedures and policies associated with the department. ____________________________________________________________________________
Senior Manufacturing Engineer
This is the senior level of the Manufacturing Engineer series and is required to have a minimum of 7 years of previous experience and working knowledge and competent demonstration of the following: All the skills listed in MfgE II position with greater experience and understanding of plastics injection molding part design and processes. Proven leadership ability to lead groups through the implementation of a new product and/or process change. Strong design skills in tooling/fixturing/jigs for production. Understanding and deployment of Design of Experiments methodologies to uncover optimum processing conditions. Excellent analytical skills in the areas of process efficiency to focus efforts on "bottle neck" elimination and develop justification for capital improvements. This level requires the following certifications: Design of Experiments SolidWorks Administration PDM (CPAP) Senior Manufacturing Engineer perform broader skilled work and specialize in one trade or craft but perform work in a variety of disciplines.
The Senior Manufacturing Engineer receives minimal instruction or assistance and is fully aware of the operating procedures and policies associated with the department.
_________________________________________________________________________
Hiring Range
Between $86K - $105K annually
Benefits
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, leaves of absence, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability. Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's All job offers are contingent upon satisfactory pre-employment drug test and background screening. Accepting applications through June 30, 2025.
Applications will be reviewed as received and on-going interviews will be conducted as necessary. Apply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2025-05-03 23:10:58
-
JOB DESCRIPTION
Employer Description
Legend Brands, an industry leader and long standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
Job Summary
Under general supervision, the Manufacturing Engineer (MfgE) I/II/Senior is responsible for developing, implementing, directing and coordinating manufacturing materials and processes to achieve the most efficient, cost effective and high-quality production possible in a safe and environmentally responsible manner.
The MfgE is responsible for leading the transition from new product development to manufacturing; providing daily manufacturing support for existing products; and leading implementation of design changes and quality improvements.
The MfgE works closely with all functional groups to develop robust, cost-effective manufacturing and assembly processes and related documentation for use throughout the manufacturing facility.
The MfgE drives continuous improvement and best practices by applying lean methods to eliminate waste in the value stream.
Supervision Responsibility
None
Essential Duties
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
Reasonable accommodations may be made to enable qualified individuals with a disability to perform the essential duties.
The list below is intended to be illustrative of the responsibilities of this position and is not all encompassing, nor does it constitute an employment agreement, and the duties may change at any time. Analyze, develop, and recommend design approaches to meet production requirements for new or improved products and/or processes using a Design for Manufacturing (DFM) and Design for Quality (DFQ) methods. Help coordinate manufacturing launch of new/revised products including tooling, equipment, methods and shop floor support. Create Engineering Change Orders (ECOs) and drawing package updates to support implementation of new product development efforts and changes to existing products. Specify/Design and coordinate fabrication of patterns, molds, fixtures, and gauges required in the manufacture of components and assemblies. Provide shop floor support, interfacing with other functional groups as required, to resolve processing issues with sound, lasting, corrective actions. Participate in "make/buy" decisions to determine the most cost-effective manner in which to manufacture hardware. Review new tooling (injection mold, vacuum form, and rotomold) packages to ensure all tooling meets part design and manufacturing requirements. Establish process control parameters and help to define Standard Work to optimize efficiency and First Pass Yield (FPY). Analyze space requirements and workflow, and design the layout of equipment and workstations to ensure maximum efficiency and an ergonomically sound work environment. Perform research and development of manufacturing processes including production flow, assembly methods and production equipment.
Conduct studies and evaluations aimed at developing new technologies to reduce cost/lead time, and improve quality/product flow Performs other related duties as assigned.
Minimum Qualifications
The requirements listed below are representative of the education, experience, certification and/or licensure required.
An equivalent combination of education and experience to perform the essential duties and meet the necessary employment standards may be considered.
Education and Experience
Bachelor's Degree in Manufacturing Engineering or Mechanical Engineering required. ________________________________________________________________________
Manufacturing Engineer II
This is the next level of the Manufacturing Engineer series and is required to have a minimum of 4 years of previous experience and working knowledge and competent demonstration of the following: Design for Manufacturing and Design for Quality in new products and changes to existing products to improve process efficiency, ergonomics, tooling/fixturing, etc. Ability to address issues in the manufacturing environment through development of process improvements Support new product development early in the product design phase to ensure DFM and DFQ are considered and implemented early in the project. Strong SolidWorks design and drawing package skills that meet project deadlines and internal/external customer needs. Demonstrated team leadership with strong communication skills. This level requires the following certifications: SolidWorks CAD Design Professional (CSWP) Manufacturing Engineer II perform broader range of duties, proven skillset to fully perform Manufacturing Engineer responsibilities, more technically complex tasks, expected to set an example of professional efficiency, and provide technical direction to less experienced staff.
May also operate more than one station. The Manufacturing Engineer II receives minimal instruction or assistance and is fully aware of the operating procedures and policies associated with the department. ____________________________________________________________________________
Senior Manufacturing Engineer
This is the senior level of the Manufacturing Engineer series and is required to have a minimum of 7 years of previous experience and working knowledge and competent demonstration of the following: All the skills listed in MfgE II position with greater experience and understanding of plastics injection molding part design and processes. Proven leadership ability to lead groups through the implementation of a new product and/or process change. Strong design skills in tooling/fixturing/jigs for production. Understanding and deployment of Design of Experiments methodologies to uncover optimum processing conditions. Excellent analytical skills in the areas of process efficiency to focus efforts on "bottle neck" elimination and develop justification for capital improvements. This level requires the following certifications: Design of Experiments SolidWorks Administration PDM (CPAP) Senior Manufacturing Engineer perform broader skilled work and specialize in one trade or craft but perform work in a variety of disciplines.
The Senior Manufacturing Engineer receives minimal instruction or assistance and is fully aware of the operating procedures and policies associated with the department.
_________________________________________________________________________
Hiring Range
Between $86K - $105K annually
Benefits
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, leaves of absence, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability. Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's All job offers are contingent upon satisfactory pre-employment drug test and background screening. Accepting applications through June 30, 2025.
Applications will be reviewed as received and on-going interviews will be conducted as necessary. Apply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2025-05-03 23:10:42
-
JOB DESCRIPTION
Tremco Construction ProductsGroupbrings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
Accountable for the development and implementation of programs in the Environmental, Health, Safety and Security areas of manufacturing.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Lead Comprehensive EHS Programs: Oversee all safety and environmental initiatives within the plant, aligning them with government regulations and company standards.
Develop and implement strategies to enhance EHS performance. Compliance Assurance: Ensure rigorous compliance with federal, state, and local regulations, as well as corporate EHS practices.
Act as a liaison between the plant and regulatory agencies to maintain a transparent and cooperative relationship. Project Management: Identify, design, and execute EHS-related projects to address safety and environmental challenges.
Take charge of corrective actions for any EHS concerns that arise. Training and Education: Conduct EHS training sessions to raise awareness among employees about safety protocols, environmental responsibilities, and regulatory compliance. Emergency Preparedness: Lead the development and maintenance of the Emergency Preparedness Program, ensuring its effectiveness and alignment with industry best practices. Inspections and Audits: Coordinate and lead both internal and external inspections and audits.
Address findings promptly and develop strategies to continuously improve EHS performance. Knowledge Transfer: Facilitate knowledge sharing across teams by leveraging your expertise gained from formal and informal training.
Empower employees with EHS insights and best practices. EHS Reporting: Compile data for submission related to environmental permits (air, water & hazardous waste), safety statistics and corporate EHS submissions. EDUCATION AND EXPERIENCE:
Bachelor's degree in Engineering, Industrial Safety, Industrial Hygiene or related professional field of study. 7 plus years' experience working in EHS or related field, including experience leading the development and implementation of environmental and safety programs in a manufacturing or chemical operation. Multi-site experience preferred. SAP experience preferred.
CERTIFICATES, LICENSES, REGISTRATIONS:
CSP (certified safety professional) and/or other related EHS certifications a plus.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Strong knowledge and understanding of State and Federal EHS Regulations. Proficient in environmental air permits including QDRs, PERs and PTOs. Strong understanding of hazardous waste management for LQG & SQG. Experience with PSM with PHAs. Experience with ISO 14001&45001. Proficient in Microsoft Office. Strong communication skills both in oral and written. Ability to proactively identify and correct conditions that affect employee safety.
BENEFITS:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-05-02 23:11:46
-
JOB DESCRIPTION
Tremco Construction ProductsGroupbrings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
Accountable for the development and implementation of programs in the Environmental, Health, Safety and Security areas of manufacturing.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Lead Comprehensive EHS Programs: Oversee all safety and environmental initiatives within the plant, aligning them with government regulations and company standards.
Develop and implement strategies to enhance EHS performance. Compliance Assurance: Ensure rigorous compliance with federal, state, and local regulations, as well as corporate EHS practices.
Act as a liaison between the plant and regulatory agencies to maintain a transparent and cooperative relationship. Project Management: Identify, design, and execute EHS-related projects to address safety and environmental challenges.
Take charge of corrective actions for any EHS concerns that arise. Training and Education: Conduct EHS training sessions to raise awareness among employees about safety protocols, environmental responsibilities, and regulatory compliance. Emergency Preparedness: Lead the development and maintenance of the Emergency Preparedness Program, ensuring its effectiveness and alignment with industry best practices. Inspections and Audits: Coordinate and lead both internal and external inspections and audits.
Address findings promptly and develop strategies to continuously improve EHS performance. Knowledge Transfer: Facilitate knowledge sharing across teams by leveraging your expertise gained from formal and informal training.
Empower employees with EHS insights and best practices. EHS Reporting: Compile data for submission related to environmental permits (air, water & hazardous waste), safety statistics and corporate EHS submissions. EDUCATION AND EXPERIENCE:
Bachelor's degree in Engineering, Industrial Safety, Industrial Hygiene or related professional field of study. 7 plus years' experience working in EHS or related field, including experience leading the development and implementation of environmental and safety programs in a manufacturing or chemical operation. Multi-site experience preferred. SAP experience preferred.
CERTIFICATES, LICENSES, REGISTRATIONS:
CSP (certified safety professional) and/or other related EHS certifications a plus.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Strong knowledge and understanding of State and Federal EHS Regulations. Proficient in environmental air permits including QDRs, PERs and PTOs. Strong understanding of hazardous waste management for LQG & SQG. Experience with PSM with PHAs. Experience with ISO 14001&45001. Proficient in Microsoft Office. Strong communication skills both in oral and written. Ability to proactively identify and correct conditions that affect employee safety.
BENEFITS:
Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2025-05-02 23:11:08
-
Are you an experienced Mechanical Fitter seeking an exciting opportunity to work with a leader in the chemical manufacturing industry? This business is currently looking to expand their engineering team at their site based in the Halifax area and invite applications for this rewarding and dynamic role.
Role Overview for the Mechanical Fitter: As a Mechanical Fitter, you will play a crucial role in supporting the engineering team by performing both planned and unplanned maintenance on their COMAH regulated site.
This is a days-based role working Monday - Friday, offering a great work-life balance.
Salary & Benefits:
Annual Salary: £40,000 - £45,000 (DOE)
Annual Call Out Bonus: Of £2,600
Annual Leave: 33 Days (Inclusive of Bank Holidays)
Pension Scheme: Competitive Employer Contribution
Private Medical Cover
Overtime: Up To 2x Hourly Rate
Key Responsibilities of the Mechanical Fitter:
Perform routine, corrective, and breakdown maintenance to ensure the safe and efficient operation of plant equipment.
Perform daily maintenance and fitting tasks with pumps, motors, heat exchanges, drives, vessels and pipework.
Ensure all work complies with company standards, policies, and procedures, minimizing risks to personnel, the environment, and company assets.
Support and contribute to planning and scheduling strategies to provide optimal service to operating departments.
Work across various departments to meet operational goals while adhering to company standards.
Assist in the Competency-Based Training of departmental staff as needed.
Demonstrate a strong commitment to Health, Safety, and Environmental (HSE) initiatives.
Required Qualifications & Experience needed for the Mechanical Fitter:
A minimum of a Level 3 qualification in Mechanical Engineering (or equivalent).
Previous experience in an industrial environment within Chemical, Process Manufacturing, or Oil & Gas industries.
Must have experience of working on a COMAH site.
Hands-on experience with pumps, Heat Exchangers, Motors is essential.
Pipefitting and Fabrication would be beneficial.
If you are a skilled and dedicated Mechanical Fitter looking to join a thriving team and enjoy excellent benefits and a rewarding work environment, we would love to hear from you.
To apply for the Mechanical Fitter role: Please submit your CV for review.
....Read more...
Type: Permanent Location: Halifax, England
Start: ASAP
Salary / Rate: £40000.00 - £45000.00 per annum + (DOE) - Pension, 33 Holidays etc.
Posted: 2025-05-02 09:33:36
-
A globally leading chemical manufacturing company located in Lincolnshire is seeking a Mechanical Engineer to join their team, offering a salary of up to £65,000 per annum.
The comprehensive benefits package includes a double-figure pension, annual bonus, hybrid working options, private medical insurance, and 25 days of annual leave plus bank holidays.As a Mechanical Engineer you will provide technical insights on inspection findings for static and rotating equipment, ensuring repairs comply with codes, and proactively managing asset replacements to minimise plant downtime.Collaborating with Reliability Engineers, you'll improve plant reliability by addressing underperforming equipment or processes.
Proficiency in occupational and process safety is vital, given the multi-disciplinary nature of working in a COMAH site.
Additionally, you'll oversee maintenance within designated areas, adhering to relevant standards.Mechanical Engineer Responsibilities
Manage small projects, whether they involve capital or operational expenses.
Serve as a resource for maintenance supervisors, offering expertise in troubleshooting complex issues.
Analyse maintenance costs to identify areas for improvement.
Perform engineering design calculations as required to support the maintenance team.
Provide specialised assistance in managing reactive maintenance repair issues.
Develop Statements of Work (SOW) for the Reliability and Projects teams to address long-term solutions.
Assist the Maintenance Coordinator in optimising the execution of scheduled maintenance tasks.
Demonstrate proficiency in diagnosing faults and conducting equipment repairs.
We are seeking a motivated individual with a Mechanical Engineering degree, preferably chartered, along with knowledge of UK Health and Safety legislation, ideally NEBOSH Certificate qualified, and experience in high-quality maintenance engineering within chemical manufacturing.Please apply direct for further information regarding this Mechanical Engineer opportunity. ....Read more...
Type: Permanent Location: Brigg, England
Salary / Rate: £60000.00 - £65000.00 per annum + DOE- Plus Numerous Benefits
Posted: 2025-04-30 16:21:22
-
JOB DESCRIPTION
DAP is looking to hire R&D Intern for Summer 2025.
Responsibilities:
The summer intern would work under mentorship of a senior scientist to perform collaborative research and development of sealants with unique and differentiated properties.
This R&D work will include: Formulating raw materials into a functional product Analytical testing to understand raw materials, as well as formulated product properties Applications testing of formulated products for end-use performance prediction
Pay
$17 / hour.
Requirements
Major: Chemical Engineering, Chemistry, Physics, Polymer Engineering College classification (freshman, sophomore, junior or senior): Junior, or Senior Skills required to perform tasks: Preferred but not required: general lab skills (weighing materials on benchtop scale, transferring liquids/solids from one container to another, adherence to lab safety rules), some organic chemistry knowledge, adept with hands-on work, home cooking/baking experience is a plus! Attributes (i.e., communication, customer service, organized, critical-thinking, problem solving, initiative, quick learner): Attention to details, inquisitive, good notes taker, independent worker.
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world. At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Baltimore, Maryland
Posted: 2025-04-30 15:11:12
-
JOB DESCRIPTION
DAP is looking to hire R&D Intern for Summer 2025.
Responsibilities:
The summer intern would work under mentorship of a senior scientist to perform collaborative research and development of sealants with unique and differentiated properties.
This R&D work will include: Formulating raw materials into a functional product Analytical testing to understand raw materials, as well as formulated product properties Applications testing of formulated products for end-use performance prediction
Pay
$17 / hour.
Requirements
Major: Chemical Engineering, Chemistry, Physics, Polymer Engineering College classification (freshman, sophomore, junior or senior): Junior, or Senior Skills required to perform tasks: Preferred but not required: general lab skills (weighing materials on benchtop scale, transferring liquids/solids from one container to another, adherence to lab safety rules), some organic chemistry knowledge, adept with hands-on work, home cooking/baking experience is a plus! Attributes (i.e., communication, customer service, organized, critical-thinking, problem solving, initiative, quick learner): Attention to details, inquisitive, good notes taker, independent worker.
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world. At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Baltimore, Maryland
Posted: 2025-04-30 15:11:09
-
Supply Chain Data Analyst required for an leading precision engineering company, serving industries such as Nuclear, Oil & Gas, Food & Beverage and Chemical Processing with critical components from multiple global locations including 4 UK sites.This opportunity is based in Huddersfield, meaning the successful Supply Chain Data Analyst will be able to commute from surrounding areas.Key Responsibilities of the Supply Chain Data Analyst will include;
Use advanced data analytic techniques to identify trends, cost saving and supply chain optimisation.
Analyse spend data across various business units to make strategic sourcing decisions
Monitor and report on cost saving initiatives ensuring alignment with business objectives
Work in collaboration with supply chain and finance teams to ensure data insights are shared and actioned
Develop thorough KPI's, using them to provide metrics and reports on performance
For the role of Supply Chain Data Analyst we are keen to receive applications from individuals who have;
Experience as Supply Chain Data Analyst or similar within an Engineering or Manufacturing environment
Strong analytical and problem solving skills
Experience using data analytics tools such as Excel, SQL and visualisation software
Excellent communication and presentation skills
Salary & Benefits;
Extremely competitive salary
Up to 25% Annual bonus
26 Days annual leave + Bank holidays
Up to 8% employer contributions
Mon - Thur 8am - 4.30pm
Fri - 8am - 1pm
Enhanced company sick pay
Optical vouchers, employee assistance, Discounts, cash back and offers
To apply for the Supply Chain Data Analyst position, please click “Apply Now” and attach an updated copy of your CV.
Alternatively, please contact Alex Feather at E3 Recruitment for more information. ....Read more...
Type: Permanent Location: Brighouse, England
Start: ASAP
Salary / Rate: £10000.00 - £1000000 per annum + 25% Annual Bonus
Posted: 2025-04-29 14:31:52
-
Cleanroom Technician required to join an existing technical team as part of the internal Electrical Engineering Division with multiple Cleanrooms.
You will be responsible for helping maintain equipment and report problems with the operation of the cleanrooms, from contributing to lab waste management, user requests, restocking, sample management and general housekeeping and safety in the cleanrooms.
The ideal candidate will be educated to GCSE level 4 / NVQ level 2 or equivalent with Mathematics, English and a science subject or have an equivalent level of practical experience.
As you will be joining an existing team, it is essential that you are a team player with good communication, interpersonal and organisational skills.
IT literacy is a bonus, the ideal candidate will have previous experience in a Cleanroom or laboratory environment with health and safety knowledge of hazardous materials, electricity, machinery, pressurised systems and the safe use of chemicals. ....Read more...
Type: Permanent Location: Cheltenham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £28000 - £33000 Per Annum None
Posted: 2025-04-25 16:00:47
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
During each term as a Process Engineering Co-Op they will have the opportunity to learn, experience and contribute to the operations of the polyurethane sealants and coatings manufacturing process.
The co-op will develop an understanding of the relationship between the manufacturing process and the various teams that support the process.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Will work in conjunction with the process and quality engineering group to support safety, quality, maintenance and production processes.
Learn and use process tools such as Process Safety Management, Behavioral Risk Improvement and Lean Six-Sigma tools including 5S, A3 Problem Solving, Statistical Process Control and Value Stream Mapping.
Interaction with the plant will be part of the daily routine.
Some responsibilities are, but not limited to:
Lead small projects for improvement of a process or equipment. Collect data for process waste reduction.
Edit or create P&IDs.
Work alongside Process Engineers on Capital Expense Projects.
Conduct meetings to communicate information or collaborate on projects.
Serve as a back-up for the Quality Lab Safety.
EDUCATION REQUIREMENT:
Must be a sophomore, junior or senior in good academic standing, pursuing a bachelor's degree in chemical, electrical or mechanical engineering at an accredited college or university.
EXPERIENCE REQUIREMENT:
No prior experience or training required.
Experience with manufacturing is encouraged but not required.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Understanding process variance and the resultant effects on Quality.
Knowledge of applied statistics.
Ability to perform problem analysis utilizing problem solving methodology.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, talk, hear, and lift up to 50 lbs.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Ashland, Ohio
Posted: 2025-04-25 15:12:48
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
During each term as a Process Engineering Co-Op they will have the opportunity to learn, experience and contribute to the operations of the polyurethane sealants and coatings manufacturing process.
The co-op will develop an understanding of the relationship between the manufacturing process and the various teams that support the process.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Will work in conjunction with the process and quality engineering group to support safety, quality, maintenance and production processes.
Learn and use process tools such as Process Safety Management, Behavioral Risk Improvement and Lean Six-Sigma tools including 5S, A3 Problem Solving, Statistical Process Control and Value Stream Mapping.
Interaction with the plant will be part of the daily routine.
Some responsibilities are, but not limited to:
Lead small projects for improvement of a process or equipment. Collect data for process waste reduction.
Edit or create P&IDs.
Work alongside Process Engineers on Capital Expense Projects.
Conduct meetings to communicate information or collaborate on projects.
Serve as a back-up for the Quality Lab Safety.
EDUCATION REQUIREMENT:
Must be a sophomore, junior or senior in good academic standing, pursuing a bachelor's degree in chemical, electrical or mechanical engineering at an accredited college or university.
EXPERIENCE REQUIREMENT:
No prior experience or training required.
Experience with manufacturing is encouraged but not required.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Understanding process variance and the resultant effects on Quality.
Knowledge of applied statistics.
Ability to perform problem analysis utilizing problem solving methodology.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, talk, hear, and lift up to 50 lbs.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Ashland, Ohio
Posted: 2025-04-25 15:12:23
-
Head of Commercial Operations required for an leading precision engineering company, serving industries such as Nuclear, Oil & Gas, Food & Beverage and Chemical Processing with critical components from multiple global locations including 4 UK sites.This opportunity is based in Huddersfield, meaning the successful Head of Commercial Operations will be able to commute from surrounding areas.Key Responsibilities of the Head of Commercial Operations will include;
Achieve business targets across all product ranges
Maximise quotation potential via the Internal Sales Department
Provide detailed and accurate forecasting and budgets (weekly, monthly and quarterly)
Develop actions plans to penetrate new markets
Manage the product mix, project pricing and margins
Develop relationships with existing and new customers
Assist in project tender proposals and presentations with the External Sales Department
For the role of Head of Commercial Operations we are keen to receive applications from individuals who have;
Experience as Head of Commercial Operations, Head of Sales or similar within an Engineering or Manufacturing environment
Experience managing sales teams and delivering targets
HNC or Degree qualified (preferred)
Knowledge of the Oil & Gas industry
Strong analytical skills
Salary & Benefits;
Extremely competitive salary (depending on experience)
20-30% Annual bonus
26 Days annual leave + Bank holidays
Up to 8% employer contributions
Mon - Thur 8am - 4.30pm
Fri - 8am - 1pm
Enhanced company sick pay
Optical vouchers, employee assistance, Discounts, cash back and offers
To apply for the Head of Commercial Operations position, please click “Apply Now” and attach an updated copy of your CV.
Alternatively, please contact Alex Feather at E3 Recruitment for more information. ....Read more...
Type: Permanent Location: Elland, England
Start: ASAP
Salary / Rate: £10000.00 - £1000000 per annum + up to 30% Annual Bonus
Posted: 2025-04-25 10:37:05
