-
Technician I - Testing
JOB DESCRIPTION Title: Testing Technician Summary: Support the Research & Development laboratory team in the development, modification, and evaluation of high-performance corrosion-resistant coatings, linings, and fireproofing products. This role reports directly to the Testing Supervisor or senior lab personnel and plays a key part in ensuring product quality and innovation. The Technician I will perform routine laboratory testing, conduct quality control evaluations, grade test panels, complete paint calculations, and maintain accurate laboratory documentation-all while gaining hands-on experience under the guidance of experienced team members. Minimum Requirements: High School Diploma or equivalent required. Preferred: 1 year of college-level Chemistry coursework or a minimum of 1 year of laboratory experience. Must successfully pass a Jaeger Eye Test. Physical Requirements: Ability to lift up to 50 pounds. Regular exposure to various chemicals including, but not limited to, amines, polyamides, isocyanates, epoxies, alkyds, acrylics, and certain inorganic compounds. Use of personal protective equipment (PPE) is required. Must be able to pass an annual respirator medical evaluation and pulmonary function test in compliance with OSHA regulations. Essential Functions: Operate laboratory instruments and perform testing in accordance with established procedures. Maintain accurate, organized, and timely documentation in lab notebooks and digital systems. Grade test panels and record results following standard evaluation methods. Assist with data collection and analysis to support product performance and troubleshooting. Utilize lab software for reporting, calculations, and inventory tracking. Collaborate with supervisors to prepare and complete project reports. Understand and reference Safety Data Sheets (SDS) for all materials used. Follow all safety protocols, SOPs, and environmental regulations. Apply coatings using spray, roller, and brush techniques. Communicate effectively and work collaboratively with team members and other departments. Perform basic equipment maintenance and troubleshooting as needed. Support compliance with hazardous waste handling and training requirements. Use Microsoft Office tools (Teams, Word, Excel) for daily tasks. Who We Are: Carboline is a St. Louis-based coatings manufacturer with a global reach. The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world. Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously. Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you. What We Offer: We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions. Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan. Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace. Individuals with Disabilities and Protected Veterans are encouraged to apply. "In order to be the best, we must hire the best."Apply for this ad Online! ....Read more...
Type: Permanent Location: St. Louis, Missouri Posted: 2026-08-08 23:11:38 -
Technician I - Testing
JOB DESCRIPTION Title: Testing Technician Summary: Support the Research & Development laboratory team in the development, modification, and evaluation of high-performance corrosion-resistant coatings, linings, and fireproofing products. This role reports directly to the Testing Supervisor or senior lab personnel and plays a key part in ensuring product quality and innovation. The Technician I will perform routine laboratory testing, conduct quality control evaluations, grade test panels, complete paint calculations, and maintain accurate laboratory documentation-all while gaining hands-on experience under the guidance of experienced team members. Minimum Requirements: High School Diploma or equivalent required. Preferred: 1 year of college-level Chemistry coursework or a minimum of 1 year of laboratory experience. Must successfully pass a Jaeger Eye Test. Physical Requirements: Ability to lift up to 50 pounds. Regular exposure to various chemicals including, but not limited to, amines, polyamides, isocyanates, epoxies, alkyds, acrylics, and certain inorganic compounds. Use of personal protective equipment (PPE) is required. Must be able to pass an annual respirator medical evaluation and pulmonary function test in compliance with OSHA regulations. Essential Functions: Operate laboratory instruments and perform testing in accordance with established procedures. Maintain accurate, organized, and timely documentation in lab notebooks and digital systems. Grade test panels and record results following standard evaluation methods. Assist with data collection and analysis to support product performance and troubleshooting. Utilize lab software for reporting, calculations, and inventory tracking. Collaborate with supervisors to prepare and complete project reports. Understand and reference Safety Data Sheets (SDS) for all materials used. Follow all safety protocols, SOPs, and environmental regulations. Apply coatings using spray, roller, and brush techniques. Communicate effectively and work collaboratively with team members and other departments. Perform basic equipment maintenance and troubleshooting as needed. Support compliance with hazardous waste handling and training requirements. Use Microsoft Office tools (Teams, Word, Excel) for daily tasks. Who We Are: Carboline is a St. Louis-based coatings manufacturer with a global reach. The company, founded in 1947, produces high-quality performance coatings, linings, and fireproofing products in more than 20 manufacturing facilities around the world. Carboline has been ranked a top workplace, so culture and maintaining a safe and clean work environment is something we take very seriously. Carboline is part of RPM International Inc., a $7.6 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. If you want to be part of a growing global organization with opportunity for growth, we would like to meet you. What We Offer: We offer a team atmosphere that fosters cooperation and creativity; a management team committed to employee development and an environment where people are empowered to make decisions. Our career opportunities offer unlimited earnings potential, and our comprehensive benefits package is among the best in the industry which includes affordable benefits, a company match 401K plan and a retirement pension plan. Carboline is an Equal Opportunity Employer that values the strength diversity brings to the workplace. Individuals with Disabilities and Protected Veterans are encouraged to apply. "In order to be the best, we must hire the best."Apply for this ad Online! ....Read more...
Type: Permanent Location: St. Louis, Missouri Posted: 2026-08-08 23:11:37 -
Sr. Field Technical Service Representative
JOB DESCRIPTION Company Information RPM Industrial Coatings Group is home to 11 industry-leading coatings and finishing brands. Our dynamic portfolio includes liquid coatings, powder coatings, touch-up and repair products, sundries, adjuvants, and much more. You'll find our products around the globe in industries from architecture and automotive to farming, forestry, marine, and more. RPM Industrial Coatings Group is part of RPM International Inc., a $7.9 billion global company with subsidiaries that are market and industry leaders in specialty coatings, sealants, building materials, and related services. From homes and workplaces to infrastructure and precious landmarks, RPM's brands are trusted by consumers and professionals alike to help build a better world. At TCI, Inc. we're more than a premier supplier of powder coatings-we're a team of innovators, problem-solvers, and customer champions, serving clients across North America. As an industry leader, we take pride in our people, products, and unmatched service, and we're looking for talented individuals ready to help us grow even further. Our commitment to excellence starts with our team. From Sales to Technical Service, Manufacturing to Customer Service, we offer exciting career opportunities that align with your strengths, ambitions, and goals. Whether you're looking to kickstart your career or take it to the next level, we provide clear paths to individual growth and overall company success. Job Description The Sr. Field Technical Service Representative serves as the organization's highest-level field technical resource, partnering with customers, sales teams, manufacturing, and product development to optimize coating performance and deliver exceptional customer support. This role provides expert consultation in industrial liquid and powder coating technologies, leads complex troubleshooting efforts, performs technical audits, delivers customer training, and identifies opportunities to improve process efficiency, quality, and productivity. The successful candidate combines extensive coatings knowledge with exceptional problem-solving, communication, and relationship-building skills to help customers maximize the performance of their coating operations. Main Responsibilities Technical Support & Customer Service Provide advanced technical support to customers, distributors, prospects, and internal teams regarding liquid and powder coating technologies. Serve as the primary technical resource for complex application issues, product performance concerns, and process optimization. Build strong customer relationships by delivering responsive, value-added technical service. Support sales and marketing initiatives through technical expertise and customer engagement. Process Optimization & Troubleshooting Lead investigations into coating defects, equipment performance, and process variability. Conduct root cause analysis utilizing methodologies including: FMEA 5 Why Analysis Fishbone Analysis Statistical Process Control Design of Experiments (DOE) Diagnosing and resolving issues including: Adhesion failures Orange peel Solvent pop Cratering Blistering Cure deficiencies Film build variation Corrosion failures Powder contamination Reclaim system performance Coating Systems Expertise Provide technical expertise across industrial finishing operations including: Liquid coating systems Powder coating systems Pretreatment processes Surface preparation Material handling systems Conveyor systems Cure technologies Automated and robotic application systems Maintain expert knowledge of coating chemistries including solventborne, waterborne, high-solids, epoxy, polyurethane, alkyd, polyester, hybrid, acrylic, and architectural coating systems. Laboratory Testing & Process Validation Perform and interpret laboratory and field testing in accordance with ASTM, PCI, AAMA, ISO, and customer specifications. Utilize testing equipment and methodologies including: Salt Spray G85 Cyclic Corrosion QUV FTIR DSC XRF MEK Resistance Gloss Measurement Color Analysis Impact Testing Flexibility Testing Hardness Testing Operate Datapaq equipment and analyze thermal profiles to validate curing processes. Interpret laboratory results and correlate testing data with customer specifications and manufacturing performance. Auditing, Reporting & Training Conduct technical audits, certification assessments, and process evaluations. Develop detailed technical reports documenting observations, findings, corrective actions, and recommendations. Deliver technical training programs for customers, distributors, sales personnel, and manufacturing teams. Present technical information clearly to groups of varying technical backgrounds. Represent the company at customer events, industry meetings, and technical seminars. Collaboration & Leadership Partner with Sales, Marketing, R&D, Manufacturing, and Quality teams to support customer success. Lead technical initiatives that improve customer productivity, product performance, and operational efficiency. Promote continuous improvement through technical expertise and best-practice sharing. Key Qualifications Bachelor's degree in Chemistry, Chemical Engineering, Materials Science, Engineering, or a related technical field, or an equivalent combination of education and relevant industry experience. Minimum of 8 years of progressive experience in industrial coatings with demonstrated expertise in liquid coating technologies and strong working knowledge of powder coating systems. Extensive knowledge of industrial finishing processes including pretreatment, application equipment, curing technologies, and process optimization. Experience in performing technical troubleshooting and root cause analysis in manufacturing environments. Demonstrated experience conducting laboratory and field evaluations using recognized industry testing standards. Strong analytical, problem-solving, and decision-making skills. Excellent written and verbal communication skills with the ability to prepare technical reports and deliver presentations. Strong organizational skills with the ability to manage multiple projects simultaneously. Proficiency with Microsoft Office applications. Valid driver's license with an acceptable driving record. Valid passport or ability to obtain one. Willingness to travel extensively, including overnight travel (approximately 50-70%, depending on business needs). Preferred Qualifications Experience supporting OEM, agricultural, architectural, transportation, heavy equipment, or general industrial finishing operations. Knowledge of automated and robotic coating application systems. Experience with powder coating reclaim systems and process optimization. Experience conducting applicator certification audits. Familiarity with ASTM, PCI, AAMA, and ISO testing standards. Experience using statistical analysis and continuous improvement methodologies such as SPC, DOE, Lean Manufacturing, or Six Sigma. Experience delivering technical presentations and customer training programs. Working knowledge of infrared, convection, catalytic, and combination curing technologies. Experience with laboratory instrumentation including FTIR, DSC, XRF, Datapaq, and color measurement systems. Demonstrated success building long-term customer partnerships through technical consulting and service excellence. Apply for this ad Online! ....Read more...
Type: Permanent Location: Little Rock, Arkansas Posted: 2026-08-07 23:12:06 -
Field Technical Representative - South California
JOB DESCRIPTION The Technical Sales Rep ensures that the assigned revenue, margin and product mix objectives, within the corporate business framework, are met or exceeded. This is to be accomplished by securing, developing, and managing key architects, designers, general contractors, distributors, subcontractors, and end-user accounts. This position will also own and manage all related performance and service metrics for the assigned accounts for San Jose, CA region. This position is in the Tremco Commercial Sealants and Waterproofing Division covering the San Jose, CA area. Tremco Sealants manufactures sealants, air barriers, waterproofing membranes, traffic coatings, glazing accessories and more for new construction and restoration. Our products can be seen on structures from parking garages and mixed-use buildings to single-family homes and high-rises, and are also used in the modular, residential window and door, industrial and manufacturing markets. ESSENTIAL DUTIES AND RESPONSIBILITIES: Achieves or exceeds assigned sales goals and expectations. Works primarily with existing accounts, while seeking and developing new account opportunities to influence and increase use of Tremco CPG products in assigned territory. Manages assigned accounts to establish business development opportunities through account penetration, analysis, partnership with key decision makers, and strategic initiatives. Drives product specifications and project opportunities throughout assigned territory. Leverages industry knowledge, marketplace dynamics and key relationships both internally and externally to develop trusted partnerships and advisory relationships with customers with a focus on problem identification, exploration and resolution. Annually prepares and delivers strategic business/territory plans for each customer with monthly forecasts. Consistently and efficiently follows the standard sales process to identify prospects and decision makers, gain customer commitment, predict sales probability, and effectively close deals. Manages day-to-day contact, exchanges information succinctly, truthfully and ethically while addressing issues directly and tactfully in pursuit of mutual interest and benefit. Develops and delivers technical, high quality and directed digital collateral, product prospectus, presentations, and business correspondence in support of the overall sales process. Collaborates with senior staff to coordinate and execute product knowledge training sessions with internal and external customers, as appropriate, utilizing supplier representatives. Leverages all available technology on a daily basis for productivity and effective lead generation, account maintenance, sales and expense tracking, forecasting, account reviews, customer contact, presentations, etc. Works collaboratively with internal support resources to develop teamwork through cooperation, trust and mutual respect. Attends and presents business unit products and services at industry conventions and trade shows. Maintains extensive product knowledge in all product lines and service offerings. Adheres to and enforces all company policies, pricing, and operational procedures with special attention to the professional image of the company. Performs other related duties as required, requested or assigned. EDUCATION Bachelor's degree in business, Sales, Construction Management and 2-3 years of construction or industry experience OR Minimum High School Diploma or GED with 5 years of construction or industry experience EXPERIENCE Two to four years' related experience and/or training Construction knowledge (i.e., waterproofing, air barriers, framing, modular, etc.) Basic knowledge of product chemistry OTHER SKILLS AND ABILITIES: Ability to travelwithin assigned territory. (Southern New England residency preferred) Must be well organized,self-motivated, with outstandingwritten and verbalcommunication skills Proficient with Microsoft Office Suite (Word, Excel, PowerPoint) Salesforce.com or other CRM software preferred Possess a professional curiosity to figure out how things work or are put together Ability to retain knowledge and training Proven ability to understand, use, and manage your own emotions in positive ways to relieve stress, communicate effectively, empathize with others, overcome challenges and diffuse conflict. Demonstrates self-awareness and emotional self-control through adaptability, achievement orientation, and a positive outlook. Accepts and utilizes feedback effectively. Reads an audience and adjust style and approach accordingly. Excellent written and verbal communication skills Strong presentations skills Excellent interpersonal and organizational skills Ability to build relationships and deliver exceptional customer service. PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, kneel, talk, hear, and lift up to 25 lbs. BENEFITS AND COMPENSATION: The salary range for applicants in this position generally starts at $90,000 and goes up based on experience. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran statusApply for this ad Online! ....Read more...
Type: Permanent Location: Santa Ana, California Posted: 2026-08-07 15:34:10 -
Field Technical Representative - South California
JOB DESCRIPTION The Technical Sales Rep ensures that the assigned revenue, margin and product mix objectives, within the corporate business framework, are met or exceeded. This is to be accomplished by securing, developing, and managing key architects, designers, general contractors, distributors, subcontractors, and end-user accounts. This position will also own and manage all related performance and service metrics for the assigned accounts for San Jose, CA region. This position is in the Tremco Commercial Sealants and Waterproofing Division covering the San Jose, CA area. Tremco Sealants manufactures sealants, air barriers, waterproofing membranes, traffic coatings, glazing accessories and more for new construction and restoration. Our products can be seen on structures from parking garages and mixed-use buildings to single-family homes and high-rises, and are also used in the modular, residential window and door, industrial and manufacturing markets. ESSENTIAL DUTIES AND RESPONSIBILITIES: Achieves or exceeds assigned sales goals and expectations. Works primarily with existing accounts, while seeking and developing new account opportunities to influence and increase use of Tremco CPG products in assigned territory. Manages assigned accounts to establish business development opportunities through account penetration, analysis, partnership with key decision makers, and strategic initiatives. Drives product specifications and project opportunities throughout assigned territory. Leverages industry knowledge, marketplace dynamics and key relationships both internally and externally to develop trusted partnerships and advisory relationships with customers with a focus on problem identification, exploration and resolution. Annually prepares and delivers strategic business/territory plans for each customer with monthly forecasts. Consistently and efficiently follows the standard sales process to identify prospects and decision makers, gain customer commitment, predict sales probability, and effectively close deals. Manages day-to-day contact, exchanges information succinctly, truthfully and ethically while addressing issues directly and tactfully in pursuit of mutual interest and benefit. Develops and delivers technical, high quality and directed digital collateral, product prospectus, presentations, and business correspondence in support of the overall sales process. Collaborates with senior staff to coordinate and execute product knowledge training sessions with internal and external customers, as appropriate, utilizing supplier representatives. Leverages all available technology on a daily basis for productivity and effective lead generation, account maintenance, sales and expense tracking, forecasting, account reviews, customer contact, presentations, etc. Works collaboratively with internal support resources to develop teamwork through cooperation, trust and mutual respect. Attends and presents business unit products and services at industry conventions and trade shows. Maintains extensive product knowledge in all product lines and service offerings. Adheres to and enforces all company policies, pricing, and operational procedures with special attention to the professional image of the company. Performs other related duties as required, requested or assigned. EDUCATION Bachelor's degree in business, Sales, Construction Management and 2-3 years of construction or industry experience OR Minimum High School Diploma or GED with 5 years of construction or industry experience EXPERIENCE Two to four years' related experience and/or training Construction knowledge (i.e., waterproofing, air barriers, framing, modular, etc.) Basic knowledge of product chemistry OTHER SKILLS AND ABILITIES: Ability to travelwithin assigned territory. (Southern New England residency preferred) Must be well organized,self-motivated, with outstandingwritten and verbalcommunication skills Proficient with Microsoft Office Suite (Word, Excel, PowerPoint) Salesforce.com or other CRM software preferred Possess a professional curiosity to figure out how things work or are put together Ability to retain knowledge and training Proven ability to understand, use, and manage your own emotions in positive ways to relieve stress, communicate effectively, empathize with others, overcome challenges and diffuse conflict. Demonstrates self-awareness and emotional self-control through adaptability, achievement orientation, and a positive outlook. Accepts and utilizes feedback effectively. Reads an audience and adjust style and approach accordingly. Excellent written and verbal communication skills Strong presentations skills Excellent interpersonal and organizational skills Ability to build relationships and deliver exceptional customer service. PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, kneel, talk, hear, and lift up to 25 lbs. BENEFITS AND COMPENSATION: The salary range for applicants in this position generally starts at $90,000 and goes up based on experience. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran statusApply for this ad Online! ....Read more...
Type: Permanent Location: Santa Ana, California Posted: 2026-08-07 15:28:06 -
Sr. Chemist
JOB DESCRIPTION Company Information RPM Industrial Coatings Group is home to 11 industry-leading coatings and finishing brands. Our dynamic portfolio includes liquid coatings, powder coatings, touch-up and repair products, sundries, adjuvants, and much more. You'll find our products around the globe in industries from architecture and automotive to farming, forestry, marine, and more. RPM Industrial Coatings Group is part of RPM International Inc., a $7.3 billion global company with subsidiaries that are market and industry leaders in specialty coatings, sealants, building materials, and related services. From homes and workplaces to infrastructure and precious landmarks, RPM's brands are trusted by consumers and professionals alike to help build a better world. Pettit Marine Paint manufactures and markets a complete line of high performance, American made, marine coatings. Pettit's name is recognized throughout the world as a leader in the marine industry, and our reputation is based on results; our products outperform all other major brands in the industry time and time again. We're committed to keeping your boat protected and beautiful by providing long-lasting, quality products that let you spend less time maintaining your boat and more time enjoying it. From topside paints to antifoulant bottom paints and everything in-between, Pettit's products have you covered. Job Description The Sr. Chemist, Recreational and Marine Coatings is responsible for leading the research, development, and optimization of high-performance coating technologies across MRT's recreational coatings portfolio, with primary emphasis on marine applications under Pettit and secondary support for aquatics applications under Ramuc and Tuff Coat. This role is responsible for developing new products, improving existing formulations, and providing technical expertise to support manufacturing, quality, regulatory compliance, and customer needs. The Sr. Chemist will drive projects from concept through commercialization while collaborating with cross-functional teams to deliver coating solutions that meet demanding performance, environmental, and customer requirements. Main Responsibilities Lead the formulation, development, and testing of marine recreational coating systems across marine and aquatic applications, including anti-fouling/fouling-release coatings, primers, anti-corrosion coatings, topside systems, and protective finishes, while also supporting pool, deck, and other recreational surface coatings as needed.. Design and execute laboratory experiments to evaluate coating performance, durability, adhesion, corrosion resistance, weatherability, chemical resistance, application properties, and suitability for marine and aquatic environments. Manage new product development projects from concept through scale-up and commercial launch. Analyze experimental data and prepare technical reports, recommendations, and presentations. Investigate and resolve product performance, manufacturing, and customer-related technical issues. Identify opportunities for raw material optimization, cost reduction, and continuous improvement while maintaining product quality and performance. Stay current with industry trends, competitive technologies, environmental regulations, and emerging raw materials. Mentor chemists and other laboratory personnel while promoting safe laboratory practices and technical excellence. Maintain accurate laboratory documentation and ensure compliance with company, customer, and regulatory requirements. Key Qualifications Bachelor's degree in Chemistry or related scientific discipline, Master's degree preferred. 5+ years of related work experience, preferably in marine, recreational, industrial, or protective coatings. Strong knowledge of epoxy, polyurethane, acrylic, alkyd, and other resin technologies. Experience supporting product scale-up and manufacturing processes. Preferred Qualifications Experience with anti-fouling/fouling-release technologies, marine and aquatic recreational coating performance requirements. Knowledge of EPA FIFRA registrations and testing for biocide products. Strong analytical, problem-solving, and project management skills. Excellent written and verbal communication skills with the ability to present technical information to both technical and non-technical audiences. Demonstrated ability to work independently while leading cross-functional development efforts.Apply for this ad Online! ....Read more...
Type: Permanent Location: Greensboro, North Carolina Posted: 2026-08-07 15:26:50 -
Sr. Field Technical Service Representative
JOB DESCRIPTION Company Information RPM Industrial Coatings Group is home to 11 industry-leading coatings and finishing brands. Our dynamic portfolio includes liquid coatings, powder coatings, touch-up and repair products, sundries, adjuvants, and much more. You'll find our products around the globe in industries from architecture and automotive to farming, forestry, marine, and more. RPM Industrial Coatings Group is part of RPM International Inc., a $7.9 billion global company with subsidiaries that are market and industry leaders in specialty coatings, sealants, building materials, and related services. From homes and workplaces to infrastructure and precious landmarks, RPM's brands are trusted by consumers and professionals alike to help build a better world. At TCI, Inc. we're more than a premier supplier of powder coatings-we're a team of innovators, problem-solvers, and customer champions, serving clients across North America. As an industry leader, we take pride in our people, products, and unmatched service, and we're looking for talented individuals ready to help us grow even further. Our commitment to excellence starts with our team. From Sales to Technical Service, Manufacturing to Customer Service, we offer exciting career opportunities that align with your strengths, ambitions, and goals. Whether you're looking to kickstart your career or take it to the next level, we provide clear paths to individual growth and overall company success. Job Description The Sr. Field Technical Service Representative serves as the organization's highest-level field technical resource, partnering with customers, sales teams, manufacturing, and product development to optimize coating performance and deliver exceptional customer support. This role provides expert consultation in industrial liquid and powder coating technologies, leads complex troubleshooting efforts, performs technical audits, delivers customer training, and identifies opportunities to improve process efficiency, quality, and productivity. The successful candidate combines extensive coatings knowledge with exceptional problem-solving, communication, and relationship-building skills to help customers maximize the performance of their coating operations. Main Responsibilities Technical Support & Customer Service Provide advanced technical support to customers, distributors, prospects, and internal teams regarding liquid and powder coating technologies. Serve as the primary technical resource for complex application issues, product performance concerns, and process optimization. Build strong customer relationships by delivering responsive, value-added technical service. Support sales and marketing initiatives through technical expertise and customer engagement. Process Optimization & Troubleshooting Lead investigations into coating defects, equipment performance, and process variability. Conduct root cause analysis utilizing methodologies including: FMEA 5 Why Analysis Fishbone Analysis Statistical Process Control Design of Experiments (DOE) Diagnosing and resolving issues including: Adhesion failures Orange peel Solvent pop Cratering Blistering Cure deficiencies Film build variation Corrosion failures Powder contamination Reclaim system performance Coating Systems Expertise Provide technical expertise across industrial finishing operations including: Liquid coating systems Powder coating systems Pretreatment processes Surface preparation Material handling systems Conveyor systems Cure technologies Automated and robotic application systems Maintain expert knowledge of coating chemistries including solventborne, waterborne, high-solids, epoxy, polyurethane, alkyd, polyester, hybrid, acrylic, and architectural coating systems. Laboratory Testing & Process Validation Perform and interpret laboratory and field testing in accordance with ASTM, PCI, AAMA, ISO, and customer specifications. Utilize testing equipment and methodologies including: Salt Spray G85 Cyclic Corrosion QUV FTIR DSC XRF MEK Resistance Gloss Measurement Color Analysis Impact Testing Flexibility Testing Hardness Testing Operate Datapaq equipment and analyze thermal profiles to validate curing processes. Interpret laboratory results and correlate testing data with customer specifications and manufacturing performance. Auditing, Reporting & Training Conduct technical audits, certification assessments, and process evaluations. Develop detailed technical reports documenting observations, findings, corrective actions, and recommendations. Deliver technical training programs for customers, distributors, sales personnel, and manufacturing teams. Present technical information clearly to groups of varying technical backgrounds. Represent the company at customer events, industry meetings, and technical seminars. Collaboration & Leadership Partner with Sales, Marketing, R&D, Manufacturing, and Quality teams to support customer success. Lead technical initiatives that improve customer productivity, product performance, and operational efficiency. Promote continuous improvement through technical expertise and best-practice sharing. Key Qualifications Bachelor's degree in Chemistry, Chemical Engineering, Materials Science, Engineering, or a related technical field, or an equivalent combination of education and relevant industry experience. Minimum of 8 years of progressive experience in industrial coatings with demonstrated expertise in liquid coating technologies and strong working knowledge of powder coating systems. Extensive knowledge of industrial finishing processes including pretreatment, application equipment, curing technologies, and process optimization. Experience in performing technical troubleshooting and root cause analysis in manufacturing environments. Demonstrated experience conducting laboratory and field evaluations using recognized industry testing standards. Strong analytical, problem-solving, and decision-making skills. Excellent written and verbal communication skills with the ability to prepare technical reports and deliver presentations. Strong organizational skills with the ability to manage multiple projects simultaneously. Proficiency with Microsoft Office applications. Valid driver's license with an acceptable driving record. Valid passport or ability to obtain one. Willingness to travel extensively, including overnight travel (approximately 50-70%, depending on business needs). Preferred Qualifications Experience supporting OEM, agricultural, architectural, transportation, heavy equipment, or general industrial finishing operations. Knowledge of automated and robotic coating application systems. Experience with powder coating reclaim systems and process optimization. Experience conducting applicator certification audits. Familiarity with ASTM, PCI, AAMA, and ISO testing standards. Experience using statistical analysis and continuous improvement methodologies such as SPC, DOE, Lean Manufacturing, or Six Sigma. Experience delivering technical presentations and customer training programs. Working knowledge of infrared, convection, catalytic, and combination curing technologies. Experience with laboratory instrumentation including FTIR, DSC, XRF, Datapaq, and color measurement systems. Demonstrated success building long-term customer partnerships through technical consulting and service excellence. Apply for this ad Online! ....Read more...
Type: Permanent Location: Little Rock, Arkansas Posted: 2026-08-07 15:26:41 -
Sr. Field Technical Service Representative
JOB DESCRIPTION Company Information RPM Industrial Coatings Group is home to 11 industry-leading coatings and finishing brands. Our dynamic portfolio includes liquid coatings, powder coatings, touch-up and repair products, sundries, adjuvants, and much more. You'll find our products around the globe in industries from architecture and automotive to farming, forestry, marine, and more. RPM Industrial Coatings Group is part of RPM International Inc., a $7.9 billion global company with subsidiaries that are market and industry leaders in specialty coatings, sealants, building materials, and related services. From homes and workplaces to infrastructure and precious landmarks, RPM's brands are trusted by consumers and professionals alike to help build a better world. At TCI, Inc. we're more than a premier supplier of powder coatings-we're a team of innovators, problem-solvers, and customer champions, serving clients across North America. As an industry leader, we take pride in our people, products, and unmatched service, and we're looking for talented individuals ready to help us grow even further. Our commitment to excellence starts with our team. From Sales to Technical Service, Manufacturing to Customer Service, we offer exciting career opportunities that align with your strengths, ambitions, and goals. Whether you're looking to kickstart your career or take it to the next level, we provide clear paths to individual growth and overall company success. Job Description The Sr. Field Technical Service Representative serves as the organization's highest-level field technical resource, partnering with customers, sales teams, manufacturing, and product development to optimize coating performance and deliver exceptional customer support. This role provides expert consultation in industrial liquid and powder coating technologies, leads complex troubleshooting efforts, performs technical audits, delivers customer training, and identifies opportunities to improve process efficiency, quality, and productivity. The successful candidate combines extensive coatings knowledge with exceptional problem-solving, communication, and relationship-building skills to help customers maximize the performance of their coating operations. Main Responsibilities Technical Support & Customer Service Provide advanced technical support to customers, distributors, prospects, and internal teams regarding liquid and powder coating technologies. Serve as the primary technical resource for complex application issues, product performance concerns, and process optimization. Build strong customer relationships by delivering responsive, value-added technical service. Support sales and marketing initiatives through technical expertise and customer engagement. Process Optimization & Troubleshooting Lead investigations into coating defects, equipment performance, and process variability. Conduct root cause analysis utilizing methodologies including: FMEA 5 Why Analysis Fishbone Analysis Statistical Process Control Design of Experiments (DOE) Diagnosing and resolving issues including: Adhesion failures Orange peel Solvent pop Cratering Blistering Cure deficiencies Film build variation Corrosion failures Powder contamination Reclaim system performance Coating Systems Expertise Provide technical expertise across industrial finishing operations including: Liquid coating systems Powder coating systems Pretreatment processes Surface preparation Material handling systems Conveyor systems Cure technologies Automated and robotic application systems Maintain expert knowledge of coating chemistries including solventborne, waterborne, high-solids, epoxy, polyurethane, alkyd, polyester, hybrid, acrylic, and architectural coating systems. Laboratory Testing & Process Validation Perform and interpret laboratory and field testing in accordance with ASTM, PCI, AAMA, ISO, and customer specifications. Utilize testing equipment and methodologies including: Salt Spray G85 Cyclic Corrosion QUV FTIR DSC XRF MEK Resistance Gloss Measurement Color Analysis Impact Testing Flexibility Testing Hardness Testing Operate Datapaq equipment and analyze thermal profiles to validate curing processes. Interpret laboratory results and correlate testing data with customer specifications and manufacturing performance. Auditing, Reporting & Training Conduct technical audits, certification assessments, and process evaluations. Develop detailed technical reports documenting observations, findings, corrective actions, and recommendations. Deliver technical training programs for customers, distributors, sales personnel, and manufacturing teams. Present technical information clearly to groups of varying technical backgrounds. Represent the company at customer events, industry meetings, and technical seminars. Collaboration & Leadership Partner with Sales, Marketing, R&D, Manufacturing, and Quality teams to support customer success. Lead technical initiatives that improve customer productivity, product performance, and operational efficiency. Promote continuous improvement through technical expertise and best-practice sharing. Key Qualifications Bachelor's degree in Chemistry, Chemical Engineering, Materials Science, Engineering, or a related technical field, or an equivalent combination of education and relevant industry experience. Minimum of 8 years of progressive experience in industrial coatings with demonstrated expertise in liquid coating technologies and strong working knowledge of powder coating systems. Extensive knowledge of industrial finishing processes including pretreatment, application equipment, curing technologies, and process optimization. Experience in performing technical troubleshooting and root cause analysis in manufacturing environments. Demonstrated experience conducting laboratory and field evaluations using recognized industry testing standards. Strong analytical, problem-solving, and decision-making skills. Excellent written and verbal communication skills with the ability to prepare technical reports and deliver presentations. Strong organizational skills with the ability to manage multiple projects simultaneously. Proficiency with Microsoft Office applications. Valid driver's license with an acceptable driving record. Valid passport or ability to obtain one. Willingness to travel extensively, including overnight travel (approximately 50-70%, depending on business needs). Preferred Qualifications Experience supporting OEM, agricultural, architectural, transportation, heavy equipment, or general industrial finishing operations. Knowledge of automated and robotic coating application systems. Experience with powder coating reclaim systems and process optimization. Experience conducting applicator certification audits. Familiarity with ASTM, PCI, AAMA, and ISO testing standards. Experience using statistical analysis and continuous improvement methodologies such as SPC, DOE, Lean Manufacturing, or Six Sigma. Experience delivering technical presentations and customer training programs. Working knowledge of infrared, convection, catalytic, and combination curing technologies. Experience with laboratory instrumentation including FTIR, DSC, XRF, Datapaq, and color measurement systems. Demonstrated success building long-term customer partnerships through technical consulting and service excellence. Apply for this ad Online! ....Read more...
Type: Permanent Location: Little Rock, Arkansas Posted: 2026-08-07 15:16:07 -
Sr. Chemist
JOB DESCRIPTION Company Information RPM Industrial Coatings Group is home to 11 industry-leading coatings and finishing brands. Our dynamic portfolio includes liquid coatings, powder coatings, touch-up and repair products, sundries, adjuvants, and much more. You'll find our products around the globe in industries from architecture and automotive to farming, forestry, marine, and more. RPM Industrial Coatings Group is part of RPM International Inc., a $7.3 billion global company with subsidiaries that are market and industry leaders in specialty coatings, sealants, building materials, and related services. From homes and workplaces to infrastructure and precious landmarks, RPM's brands are trusted by consumers and professionals alike to help build a better world. Pettit Marine Paint manufactures and markets a complete line of high performance, American made, marine coatings. Pettit's name is recognized throughout the world as a leader in the marine industry, and our reputation is based on results; our products outperform all other major brands in the industry time and time again. We're committed to keeping your boat protected and beautiful by providing long-lasting, quality products that let you spend less time maintaining your boat and more time enjoying it. From topside paints to antifoulant bottom paints and everything in-between, Pettit's products have you covered. Job Description The Sr. Chemist, Recreational and Marine Coatings is responsible for leading the research, development, and optimization of high-performance coating technologies across MRT's recreational coatings portfolio, with primary emphasis on marine applications under Pettit and secondary support for aquatics applications under Ramuc and Tuff Coat. This role is responsible for developing new products, improving existing formulations, and providing technical expertise to support manufacturing, quality, regulatory compliance, and customer needs. The Sr. Chemist will drive projects from concept through commercialization while collaborating with cross-functional teams to deliver coating solutions that meet demanding performance, environmental, and customer requirements. Main Responsibilities Lead the formulation, development, and testing of marine recreational coating systems across marine and aquatic applications, including anti-fouling/fouling-release coatings, primers, anti-corrosion coatings, topside systems, and protective finishes, while also supporting pool, deck, and other recreational surface coatings as needed.. Design and execute laboratory experiments to evaluate coating performance, durability, adhesion, corrosion resistance, weatherability, chemical resistance, application properties, and suitability for marine and aquatic environments. Manage new product development projects from concept through scale-up and commercial launch. Analyze experimental data and prepare technical reports, recommendations, and presentations. Investigate and resolve product performance, manufacturing, and customer-related technical issues. Identify opportunities for raw material optimization, cost reduction, and continuous improvement while maintaining product quality and performance. Stay current with industry trends, competitive technologies, environmental regulations, and emerging raw materials. Mentor chemists and other laboratory personnel while promoting safe laboratory practices and technical excellence. Maintain accurate laboratory documentation and ensure compliance with company, customer, and regulatory requirements. Key Qualifications Bachelor's degree in Chemistry or related scientific discipline, Master's degree preferred. 5+ years of related work experience, preferably in marine, recreational, industrial, or protective coatings. Strong knowledge of epoxy, polyurethane, acrylic, alkyd, and other resin technologies. Experience supporting product scale-up and manufacturing processes. Preferred Qualifications Experience with anti-fouling/fouling-release technologies, marine and aquatic recreational coating performance requirements. Knowledge of EPA FIFRA registrations and testing for biocide products. Strong analytical, problem-solving, and project management skills. Excellent written and verbal communication skills with the ability to present technical information to both technical and non-technical audiences. Demonstrated ability to work independently while leading cross-functional development efforts.Apply for this ad Online! ....Read more...
Type: Permanent Location: Greensboro, North Carolina Posted: 2026-08-07 15:13:46 -
Sr. Chemist
JOB DESCRIPTION Company Information RPM Industrial Coatings Group is home to 11 industry-leading coatings and finishing brands. Our dynamic portfolio includes liquid coatings, powder coatings, touch-up and repair products, sundries, adjuvants, and much more. You'll find our products around the globe in industries from architecture and automotive to farming, forestry, marine, and more. RPM Industrial Coatings Group is part of RPM International Inc., a $7.3 billion global company with subsidiaries that are market and industry leaders in specialty coatings, sealants, building materials, and related services. From homes and workplaces to infrastructure and precious landmarks, RPM's brands are trusted by consumers and professionals alike to help build a better world. Pettit Marine Paint manufactures and markets a complete line of high performance, American made, marine coatings. Pettit's name is recognized throughout the world as a leader in the marine industry, and our reputation is based on results; our products outperform all other major brands in the industry time and time again. We're committed to keeping your boat protected and beautiful by providing long-lasting, quality products that let you spend less time maintaining your boat and more time enjoying it. From topside paints to antifoulant bottom paints and everything in-between, Pettit's products have you covered. Job Description The Sr. Chemist, Recreational and Marine Coatings is responsible for leading the research, development, and optimization of high-performance coating technologies across MRT's recreational coatings portfolio, with primary emphasis on marine applications under Pettit and secondary support for aquatics applications under Ramuc and Tuff Coat. This role is responsible for developing new products, improving existing formulations, and providing technical expertise to support manufacturing, quality, regulatory compliance, and customer needs. The Sr. Chemist will drive projects from concept through commercialization while collaborating with cross-functional teams to deliver coating solutions that meet demanding performance, environmental, and customer requirements. Main Responsibilities Lead the formulation, development, and testing of marine recreational coating systems across marine and aquatic applications, including anti-fouling/fouling-release coatings, primers, anti-corrosion coatings, topside systems, and protective finishes, while also supporting pool, deck, and other recreational surface coatings as needed.. Design and execute laboratory experiments to evaluate coating performance, durability, adhesion, corrosion resistance, weatherability, chemical resistance, application properties, and suitability for marine and aquatic environments. Manage new product development projects from concept through scale-up and commercial launch. Analyze experimental data and prepare technical reports, recommendations, and presentations. Investigate and resolve product performance, manufacturing, and customer-related technical issues. Identify opportunities for raw material optimization, cost reduction, and continuous improvement while maintaining product quality and performance. Stay current with industry trends, competitive technologies, environmental regulations, and emerging raw materials. Mentor chemists and other laboratory personnel while promoting safe laboratory practices and technical excellence. Maintain accurate laboratory documentation and ensure compliance with company, customer, and regulatory requirements. Key Qualifications Bachelor's degree in Chemistry or related scientific discipline, Master's degree preferred. 5+ years of related work experience, preferably in marine, recreational, industrial, or protective coatings. Strong knowledge of epoxy, polyurethane, acrylic, alkyd, and other resin technologies. Experience supporting product scale-up and manufacturing processes. Preferred Qualifications Experience with anti-fouling/fouling-release technologies, marine and aquatic recreational coating performance requirements. Knowledge of EPA FIFRA registrations and testing for biocide products. Strong analytical, problem-solving, and project management skills. Excellent written and verbal communication skills with the ability to present technical information to both technical and non-technical audiences. Demonstrated ability to work independently while leading cross-functional development efforts.Apply for this ad Online! ....Read more...
Type: Permanent Location: Greensboro, North Carolina Posted: 2026-08-07 15:13:42 -
Field Technical Representative - South California
JOB DESCRIPTION The Technical Sales Rep ensures that the assigned revenue, margin and product mix objectives, within the corporate business framework, are met or exceeded. This is to be accomplished by securing, developing, and managing key architects, designers, general contractors, distributors, subcontractors, and end-user accounts. This position will also own and manage all related performance and service metrics for the assigned accounts for San Jose, CA region. This position is in the Tremco Commercial Sealants and Waterproofing Division covering the San Jose, CA area. Tremco Sealants manufactures sealants, air barriers, waterproofing membranes, traffic coatings, glazing accessories and more for new construction and restoration. Our products can be seen on structures from parking garages and mixed-use buildings to single-family homes and high-rises, and are also used in the modular, residential window and door, industrial and manufacturing markets. ESSENTIAL DUTIES AND RESPONSIBILITIES: Achieves or exceeds assigned sales goals and expectations. Works primarily with existing accounts, while seeking and developing new account opportunities to influence and increase use of Tremco CPG products in assigned territory. Manages assigned accounts to establish business development opportunities through account penetration, analysis, partnership with key decision makers, and strategic initiatives. Drives product specifications and project opportunities throughout assigned territory. Leverages industry knowledge, marketplace dynamics and key relationships both internally and externally to develop trusted partnerships and advisory relationships with customers with a focus on problem identification, exploration and resolution. Annually prepares and delivers strategic business/territory plans for each customer with monthly forecasts. Consistently and efficiently follows the standard sales process to identify prospects and decision makers, gain customer commitment, predict sales probability, and effectively close deals. Manages day-to-day contact, exchanges information succinctly, truthfully and ethically while addressing issues directly and tactfully in pursuit of mutual interest and benefit. Develops and delivers technical, high quality and directed digital collateral, product prospectus, presentations, and business correspondence in support of the overall sales process. Collaborates with senior staff to coordinate and execute product knowledge training sessions with internal and external customers, as appropriate, utilizing supplier representatives. Leverages all available technology on a daily basis for productivity and effective lead generation, account maintenance, sales and expense tracking, forecasting, account reviews, customer contact, presentations, etc. Works collaboratively with internal support resources to develop teamwork through cooperation, trust and mutual respect. Attends and presents business unit products and services at industry conventions and trade shows. Maintains extensive product knowledge in all product lines and service offerings. Adheres to and enforces all company policies, pricing, and operational procedures with special attention to the professional image of the company. Performs other related duties as required, requested or assigned. EDUCATION Bachelor's degree in business, Sales, Construction Management and 2-3 years of construction or industry experience OR Minimum High School Diploma or GED with 5 years of construction or industry experience EXPERIENCE Two to four years' related experience and/or training Construction knowledge (i.e., waterproofing, air barriers, framing, modular, etc.) Basic knowledge of product chemistry OTHER SKILLS AND ABILITIES: Ability to travelwithin assigned territory. (Southern New England residency preferred) Must be well organized,self-motivated, with outstandingwritten and verbalcommunication skills Proficient with Microsoft Office Suite (Word, Excel, PowerPoint) Salesforce.com or other CRM software preferred Possess a professional curiosity to figure out how things work or are put together Ability to retain knowledge and training Proven ability to understand, use, and manage your own emotions in positive ways to relieve stress, communicate effectively, empathize with others, overcome challenges and diffuse conflict. Demonstrates self-awareness and emotional self-control through adaptability, achievement orientation, and a positive outlook. Accepts and utilizes feedback effectively. Reads an audience and adjust style and approach accordingly. Excellent written and verbal communication skills Strong presentations skills Excellent interpersonal and organizational skills Ability to build relationships and deliver exceptional customer service. PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, kneel, talk, hear, and lift up to 25 lbs. BENEFITS AND COMPENSATION: The salary range for applicants in this position generally starts at $90,000 and goes up based on experience. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Tremco offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran statusApply for this ad Online! ....Read more...
Type: Permanent Location: Santa Ana, California Posted: 2026-08-07 15:13:05 -
R&D Scientist & Technical Leader - Waterborne
JOB DESCRIPTION We are seeking an R&D Scientist and Technical Leader, a critical role within our R&D organization. If you have expertise in waterborne chemistry and formulations knowledge in both architectural and industrial products, this is the opportunity you've been looking for. You should also have an expert level of technical knowledge with a strong track record of product and process development, innovation, and commercialization in coating technologies. You must also possess strong, demonstrated competencies and experience in project management accompanied by people and organizational leadership skills. Technology Knowledge: Expertise in broad ranges of coating chemistries particularly acrylic, epoxy, urethane, polyaspartics and sil(ox)anes etc. Expertise in application and formulation science for various coating systems of primer, basecoat, topcoat systems for liquid waterborne, solventborne and 2K coatings along with expert understanding of DIY, Contractor, and OEM Coatings. Strong command on analytical methods and structure-property relationship Expert understanding of manufacturing process and product development Technical Leadership: Action Oriented - ability to make strategic decisions (technical and staff utilization) and influence leaders and scientist to execute those initiative while managing business strategy and value creation Demonstrated skillset and track record in creating an environment to scout new ideas and innovation. Continuous learning and intimate awareness of open literature and competitive landscape Demonstrated ability to develop and execute project plan - time management, prioritization, managing the projects and R&D projects/teams and measuring progress. Excellent effectiveness to allocate resources towards initiatives by working with cross-functional leadership Demonstrated ability to communicate with project stakeholders and cross-functional teams, leadership and external scientific community. People Leadership: Outstanding personal and interpersonal skills - listening, compassion, motivating, inspiring, humor, patience, understanding diversity, negotiating etc. Energetic, Driving and Inspiring Action oriented, perseverance and results driven Demonstrates Courage Leadership (technical & managerial) command skills, conflict management Continuous learning/growth and mentorship and teaching skills Organization Leadership: Ability to lead and interact with cross-functional teams in a matrixed organization Agility to respond emerging business needs - strong change of management skills Managing high stakes and challenging situation with all levels of organizations Using, assessing the organizational processes and developing new processes to improve efficiency and quality Demonstrate strong career ambition - potential to become top leader. QUALIFICATIONS: KNOWLEDGE: Chemistry - Knowledge of the chemical composition, structure, and properties of substances and of the chemical processes and transformations that they undergo. This includes uses of chemicals and their interactions, danger signs, production techniques, and disposal methods. Mathematics - Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications. Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. Administration and Management - Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources. Customer and Personal Service - Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction. Engineering and Technology - Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services. At least 4 years of technical supervisory or management experience with a diverse workforce., M.S. or equivalent science degree in Chemistry, must possess a strong knowledge of organic chemistry, or related scientific field, minimum 10 years technical experience in product development in specific area of expertise, strong understanding of manufacturing, Quality assurance, scale up procedures, applications, raw materials purchasing, regulatory matters and must be computer literate, 2 to 3 years successful working experience with marketing group. From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and generous PTO (vacation/sick days/parental leave). Rust-Oleum offers (9.5) paid holidays and (2) floating holidays per year. We also offer a 401(k) plan after three months of employment. Associates are vested in the RPM Pension plan after completing five years of service. Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin Posted: 2026-08-06 15:15:30 -
R&D Scientist & Technical Leader - Waterborne
JOB DESCRIPTION We are seeking an R&D Scientist and Technical Leader, a critical role within our R&D organization. If you have expertise in waterborne chemistry and formulations knowledge in both architectural and industrial products, this is the opportunity you've been looking for. You should also have an expert level of technical knowledge with a strong track record of product and process development, innovation, and commercialization in coating technologies. You must also possess strong, demonstrated competencies and experience in project management accompanied by people and organizational leadership skills. Technology Knowledge: Expertise in broad ranges of coating chemistries particularly acrylic, epoxy, urethane, polyaspartics and sil(ox)anes etc. Expertise in application and formulation science for various coating systems of primer, basecoat, topcoat systems for liquid waterborne, solventborne and 2K coatings along with expert understanding of DIY, Contractor, and OEM Coatings. Strong command on analytical methods and structure-property relationship Expert understanding of manufacturing process and product development Technical Leadership: Action Oriented - ability to make strategic decisions (technical and staff utilization) and influence leaders and scientist to execute those initiative while managing business strategy and value creation Demonstrated skillset and track record in creating an environment to scout new ideas and innovation. Continuous learning and intimate awareness of open literature and competitive landscape Demonstrated ability to develop and execute project plan - time management, prioritization, managing the projects and R&D projects/teams and measuring progress. Excellent effectiveness to allocate resources towards initiatives by working with cross-functional leadership Demonstrated ability to communicate with project stakeholders and cross-functional teams, leadership and external scientific community. People Leadership: Outstanding personal and interpersonal skills - listening, compassion, motivating, inspiring, humor, patience, understanding diversity, negotiating etc. Energetic, Driving and Inspiring Action oriented, perseverance and results driven Demonstrates Courage Leadership (technical & managerial) command skills, conflict management Continuous learning/growth and mentorship and teaching skills Organization Leadership: Ability to lead and interact with cross-functional teams in a matrixed organization Agility to respond emerging business needs - strong change of management skills Managing high stakes and challenging situation with all levels of organizations Using, assessing the organizational processes and developing new processes to improve efficiency and quality Demonstrate strong career ambition - potential to become top leader. QUALIFICATIONS: KNOWLEDGE: Chemistry - Knowledge of the chemical composition, structure, and properties of substances and of the chemical processes and transformations that they undergo. This includes uses of chemicals and their interactions, danger signs, production techniques, and disposal methods. Mathematics - Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications. Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. Administration and Management - Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources. Customer and Personal Service - Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction. Engineering and Technology - Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services. At least 4 years of technical supervisory or management experience with a diverse workforce., M.S. or equivalent science degree in Chemistry, must possess a strong knowledge of organic chemistry, or related scientific field, minimum 10 years technical experience in product development in specific area of expertise, strong understanding of manufacturing, Quality assurance, scale up procedures, applications, raw materials purchasing, regulatory matters and must be computer literate, 2 to 3 years successful working experience with marketing group. From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and generous PTO (vacation/sick days/parental leave). Rust-Oleum offers (9.5) paid holidays and (2) floating holidays per year. We also offer a 401(k) plan after three months of employment. Associates are vested in the RPM Pension plan after completing five years of service. Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin Posted: 2026-08-06 15:13:31 -
R&D Scientist & Technical Leader - Waterborne
JOB DESCRIPTION We are seeking an R&D Scientist and Technical Leader, a critical role within our R&D organization. If you have expertise in waterborne chemistry and formulations knowledge in both architectural and industrial products, this is the opportunity you've been looking for. You should also have an expert level of technical knowledge with a strong track record of product and process development, innovation, and commercialization in coating technologies. You must also possess strong, demonstrated competencies and experience in project management accompanied by people and organizational leadership skills. Technology Knowledge: Expertise in broad ranges of coating chemistries particularly acrylic, epoxy, urethane, polyaspartics and sil(ox)anes etc. Expertise in application and formulation science for various coating systems of primer, basecoat, topcoat systems for liquid waterborne, solventborne and 2K coatings along with expert understanding of DIY, Contractor, and OEM Coatings. Strong command on analytical methods and structure-property relationship Expert understanding of manufacturing process and product development Technical Leadership: Action Oriented - ability to make strategic decisions (technical and staff utilization) and influence leaders and scientist to execute those initiative while managing business strategy and value creation Demonstrated skillset and track record in creating an environment to scout new ideas and innovation. Continuous learning and intimate awareness of open literature and competitive landscape Demonstrated ability to develop and execute project plan - time management, prioritization, managing the projects and R&D projects/teams and measuring progress. Excellent effectiveness to allocate resources towards initiatives by working with cross-functional leadership Demonstrated ability to communicate with project stakeholders and cross-functional teams, leadership and external scientific community. People Leadership: Outstanding personal and interpersonal skills - listening, compassion, motivating, inspiring, humor, patience, understanding diversity, negotiating etc. Energetic, Driving and Inspiring Action oriented, perseverance and results driven Demonstrates Courage Leadership (technical & managerial) command skills, conflict management Continuous learning/growth and mentorship and teaching skills Organization Leadership: Ability to lead and interact with cross-functional teams in a matrixed organization Agility to respond emerging business needs - strong change of management skills Managing high stakes and challenging situation with all levels of organizations Using, assessing the organizational processes and developing new processes to improve efficiency and quality Demonstrate strong career ambition - potential to become top leader. QUALIFICATIONS: KNOWLEDGE: Chemistry - Knowledge of the chemical composition, structure, and properties of substances and of the chemical processes and transformations that they undergo. This includes uses of chemicals and their interactions, danger signs, production techniques, and disposal methods. Mathematics - Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications. Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. Administration and Management - Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources. Customer and Personal Service - Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction. Engineering and Technology - Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services. At least 4 years of technical supervisory or management experience with a diverse workforce., M.S. or equivalent science degree in Chemistry, must possess a strong knowledge of organic chemistry, or related scientific field, minimum 10 years technical experience in product development in specific area of expertise, strong understanding of manufacturing, Quality assurance, scale up procedures, applications, raw materials purchasing, regulatory matters and must be computer literate, 2 to 3 years successful working experience with marketing group. From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and generous PTO (vacation/sick days/parental leave). Rust-Oleum offers (9.5) paid holidays and (2) floating holidays per year. We also offer a 401(k) plan after three months of employment. Associates are vested in the RPM Pension plan after completing five years of service. Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin Posted: 2026-08-06 15:11:38 -
Chief Technologist â Synthetic Therapeutics
ROLE OVERVIEW Are you a seasoned technical expert in synthetic therapeutics looking to shape the future of a leading organisation? A leading company in the industry is seeking a Chief Technologist Synthetic Therapeutics to join their Glasgow facility, initially on a 20 month fixed term contract (with a possibility of it becoming a permanent role). This newly created role offers the unique chance to build and lead a cutting-edge capability in peptides, oligonucleotides, and oligo conjugation. KEY DUTIES AND RESPONSIBILITIES: Your duties as the Chief Technologist Synthetic Therapeutics will be varied however the key duties and responsibilities are as follows: 1. Act as the technical expert in peptide and oligonucleotide chemistry, including synthesis, modification, and conjugation. 2. Shape the future technology strategy by identifying capability gaps, market trends, and unmet industry needs. 3. Translate technical insights into commercially viable propositions and deliverable plans. 4. Build and influence an external network of stakeholders, representing the company in industrial and academic forums. ROLE REQUIREMENTS: To be successful in your application to this exciting role as the Chief Technologist Synthetic Therapeutics we are looking to identify the following on your profile and past history: 1. Proven experience of strategic technical leadership and market awareness within the field. 2. Extensive industry experience in synthetic therapeutics, particularly in peptides and/or oligonucleotides. 3. Proven ability to translate scientific expertise into commercially relevant capabilities. This role is not just about technical delivery; its about becoming the go-to authority in synthetic therapeutics, shaping a new offering, and establishing credibility in the UK market. You will have the opportunity to build internal skills, develop the team, and create a strong external network. The role is initially a fixed-term contract for around 20 months, with the potential to become permanent based on performance and business needs. If you are ready to take on a strategic leadership role that combines deep technical knowledge with market awareness and external network strength, apply now to join a company that values innovation and expertise. Hyper Recruitment Solutions Ltd (HRS) is an Equal Opportunities employer. We welcome applications from anyone who meets the role requirements. HRS exclusively supports the Life Science sectors, combining recruitment expertise with scientific knowledge to help you advance your career. Key Words: Chief Technologist / Technical Director / Scientific Director / Principal Scientist / Synthetic Therapeutics / Oligonucleotides / Oligo Conjugates / Peptides / Peptide Synthesis / Peptide Conjugation / Synthetic Chemistry / Therapeutic Oligos / Technology Strategy / Capability Build / External Partnerships ....Read more...
Type: Permanent Location: Scotland,Scotland Start: 05/08/2026 Salary / Rate: £64000 - £84000 per annum, Benefits: Dependent on experience Posted: 2026-08-05 21:21:03 -
Corporate Manager - EH&S
JOB DESCRIPTION Position Summary: This position is responsible for developing, instituting, and overseeing all aspects of Environmental, Health, Safety and Corporate Compliance. This includes but is not limited to ensuring the company complies with all federal and state health, safety and environmental laws, regulations and reporting standards. Essential Functions: Works with all personnel at the facility to make sure all safety and environmental regulations are met and are being followed; Primarily responsible for both the overview of compliance as well as day-to-day operations with respect to safety and regulatory permits and reports. Ensure all are met with best practices and are compliant. This pertains to Federal, State, and Local regulations i.e. RCRA, EPA reporting requirements both directly to the EPA as well as those governed by Missouri DNR Air Pollution and HAZ WASTE; Conduct and coordinate on-site daily inspections to audit physical conditions and safe work practices. Including but not limited to: PPE for specific tasks, Emission Points, Work Permits, General Housekeeping, Spill Kits, Satellite and Pre-Transport Waste Storage Areas, Fire Extinguishers, Shower and Eye Wash, etc.; Be aware concerning all city, state and federal compliance regulations; Conduct and improve training programs related to all aspects of safety and compliance in the facility for all personnel. This includes but not limited to: new employee training and refreshers, forklift safety, OSHA, hazwoper, contractor orientation, FOT/IATA, etc. All training should be conducted in a timely manner and ensure additional process specific trainings are sufficient to maintain safety for employees. Maintain and update all plans required at the facility, including but not limited to: General Operating Permit, Hazardous Waste Generator Compliance, Storm water Pollution Prevention Plan, Spill Prevention Control and Countermeasures, Emergency Response Plan, Compressed Gas Plan, Contingency Plans, Hazard Communication Program and Security Plans; Essential reports such as TRI, Tier II, RMP, Quarterly and Biennial Waste Reporting (and their due dates) is the responsibility of your department. Assistance will be given from other staff to prepare and maintain this data; Participate and help conduct Safety Committee meetings; Works closely with HR manager and Vice President/CFO to become responsible for the hands-on administration of the workers' compensation program. Maintain the OSHA 300 log and tracking. Manage medical monitoring program; Maintain and improve environmental compliance programs related to hazardous wastes, air permitting, water pollution control, and community right-to-know programs; Select and maintain safety equipment and safety supplies on site. To include purchasing and keeping track of the supplies and managing the costs of these supplies; Reduce waste generation and costs of disposal. Upgrade monitoring, testing and instrumentation of waste and byproducts. Schedule and maintain all documentation related to all waste pickups, including certifying and recertifying waste profiles; Improve overall safety, housekeeping and reliability of plant work areas and compliance systems; Member of the PSM team; Implement and coordinate the documentation and schedule for preventative maintenance of equipment through the Faciliworks program. Maintain, create and close work orders. Keep Asset List up to date within Faciliworks database. Train all maintenance personnel on these procedures and manage to ensure proper procedures are followed; Ensure all permits (LOTO, Hot Work, Confined Space Entry), as well as MOC's are done correctly, and properly filed and archived. Become proficient in generating, reviewing and updating SDS's and Labels for our product line. This will be a multi-member team as GHS is being implemented in 2015, however, in 2016 and future years' maintenance of this system will become part of your department; Supervise, coach, motivate and develop staff. Minimum Requirements: Bachelor's degree in environmental management, Chemistry, Engineering, or a related discipline, or high school diploma if degree with 5 years or more of direct experience in Process Safety Management, or suitable combination of education and relevant experience as described; Specialized technical/aptitude experience: minimum of 3 years' experience in a manufacturing environment and demonstrated proficiency with manufacturing processes. Previous work and/or substantial knowledge of, including commonly used concepts, practices and procedures, within the thermoset polymer industry is a strongly considered asset; Demonstrated comprehensive knowledge of office and facilities coordination and basic leadership and management knowledge; (if applicable to position) Demonstrated organization, facilitation, communication and presentation skills; (if applicable to position) Ability to prioritize workflow and organize diverse material and ability to handle multiple, competing and changing priorities; ability to perform effectively without supervision and within established time limits and ongoing deadlines; Ability to interact and communicate effectively and professionally verbally and in writing, and to provide exceptional service internally and externally; Relevant computer skills for this position include knowledge and experience with Microsoft Office applications (Word, Excel, PowerPoint) and web-based applications. Experience using SAGE Platinum for Windows preferred. Displays adaptability in learning the use of relevant software and displays comprehension of fundamental computer practices and database management; Demonstrated ability to serve as a knowledgeable resource to the organization's management team that provides leadership and direction; Demonstrated leadership and vision managing staff groups and major projects or initiatives; Outstanding interpersonal relationship building and employee coaching and development skills. Benefits and Compensation The pay range for applicants in this position generally ranges between $120,000.00/year and $140,000/year. The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law. In addition to career advancement and growth, continuous training, and mentoring opportunities, Arnette Polymers offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans. Arnette Polymers is a division of The Stonhard Group, an RPM International company (NYSE: RPM) that is headquartered in Maple Shade, NJ and has more than 100 years of experience manufacturing and installing high performance, seamless floors throughout the world. We manufacture and install long-term floor, wall and lining solutions to markets including, but not limited to: food & beverage, general manufacturing, pharmaceutical, chemical processing, education, healthcare, government, technology and hospitality. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability. Pay: $120,000.00 - $140,00.00 per yearApply for this ad Online! ....Read more...
Type: Permanent Location: Richmond, Missouri Posted: 2026-08-05 15:12:30 -
Corporate Manager - EH&S
JOB DESCRIPTION Position Summary: This position is responsible for developing, instituting, and overseeing all aspects of Environmental, Health, Safety and Corporate Compliance. This includes but is not limited to ensuring the company complies with all federal and state health, safety and environmental laws, regulations and reporting standards. Essential Functions: Works with all personnel at the facility to make sure all safety and environmental regulations are met and are being followed; Primarily responsible for both the overview of compliance as well as day-to-day operations with respect to safety and regulatory permits and reports. Ensure all are met with best practices and are compliant. This pertains to Federal, State, and Local regulations i.e. RCRA, EPA reporting requirements both directly to the EPA as well as those governed by Missouri DNR Air Pollution and HAZ WASTE; Conduct and coordinate on-site daily inspections to audit physical conditions and safe work practices. Including but not limited to: PPE for specific tasks, Emission Points, Work Permits, General Housekeeping, Spill Kits, Satellite and Pre-Transport Waste Storage Areas, Fire Extinguishers, Shower and Eye Wash, etc.; Be aware concerning all city, state and federal compliance regulations; Conduct and improve training programs related to all aspects of safety and compliance in the facility for all personnel. This includes but not limited to: new employee training and refreshers, forklift safety, OSHA, hazwoper, contractor orientation, FOT/IATA, etc. All training should be conducted in a timely manner and ensure additional process specific trainings are sufficient to maintain safety for employees. Maintain and update all plans required at the facility, including but not limited to: General Operating Permit, Hazardous Waste Generator Compliance, Storm water Pollution Prevention Plan, Spill Prevention Control and Countermeasures, Emergency Response Plan, Compressed Gas Plan, Contingency Plans, Hazard Communication Program and Security Plans; Essential reports such as TRI, Tier II, RMP, Quarterly and Biennial Waste Reporting (and their due dates) is the responsibility of your department. Assistance will be given from other staff to prepare and maintain this data; Participate and help conduct Safety Committee meetings; Works closely with HR manager and Vice President/CFO to become responsible for the hands-on administration of the workers' compensation program. Maintain the OSHA 300 log and tracking. Manage medical monitoring program; Maintain and improve environmental compliance programs related to hazardous wastes, air permitting, water pollution control, and community right-to-know programs; Select and maintain safety equipment and safety supplies on site. To include purchasing and keeping track of the supplies and managing the costs of these supplies; Reduce waste generation and costs of disposal. Upgrade monitoring, testing and instrumentation of waste and byproducts. Schedule and maintain all documentation related to all waste pickups, including certifying and recertifying waste profiles; Improve overall safety, housekeeping and reliability of plant work areas and compliance systems; Member of the PSM team; Implement and coordinate the documentation and schedule for preventative maintenance of equipment through the Faciliworks program. Maintain, create and close work orders. Keep Asset List up to date within Faciliworks database. Train all maintenance personnel on these procedures and manage to ensure proper procedures are followed; Ensure all permits (LOTO, Hot Work, Confined Space Entry), as well as MOC's are done correctly, and properly filed and archived. Become proficient in generating, reviewing and updating SDS's and Labels for our product line. This will be a multi-member team as GHS is being implemented in 2015, however, in 2016 and future years' maintenance of this system will become part of your department; Supervise, coach, motivate and develop staff. Minimum Requirements: Bachelor's degree in environmental management, Chemistry, Engineering, or a related discipline, or high school diploma if degree with 5 years or more of direct experience in Process Safety Management, or suitable combination of education and relevant experience as described; Specialized technical/aptitude experience: minimum of 3 years' experience in a manufacturing environment and demonstrated proficiency with manufacturing processes. Previous work and/or substantial knowledge of, including commonly used concepts, practices and procedures, within the thermoset polymer industry is a strongly considered asset; Demonstrated comprehensive knowledge of office and facilities coordination and basic leadership and management knowledge; (if applicable to position) Demonstrated organization, facilitation, communication and presentation skills; (if applicable to position) Ability to prioritize workflow and organize diverse material and ability to handle multiple, competing and changing priorities; ability to perform effectively without supervision and within established time limits and ongoing deadlines; Ability to interact and communicate effectively and professionally verbally and in writing, and to provide exceptional service internally and externally; Relevant computer skills for this position include knowledge and experience with Microsoft Office applications (Word, Excel, PowerPoint) and web-based applications. Experience using SAGE Platinum for Windows preferred. Displays adaptability in learning the use of relevant software and displays comprehension of fundamental computer practices and database management; Demonstrated ability to serve as a knowledgeable resource to the organization's management team that provides leadership and direction; Demonstrated leadership and vision managing staff groups and major projects or initiatives; Outstanding interpersonal relationship building and employee coaching and development skills. Benefits and Compensation The pay range for applicants in this position generally ranges between $120,000.00/year and $140,000/year. The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law. In addition to career advancement and growth, continuous training, and mentoring opportunities, Arnette Polymers offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans. Arnette Polymers is a division of The Stonhard Group, an RPM International company (NYSE: RPM) that is headquartered in Maple Shade, NJ and has more than 100 years of experience manufacturing and installing high performance, seamless floors throughout the world. We manufacture and install long-term floor, wall and lining solutions to markets including, but not limited to: food & beverage, general manufacturing, pharmaceutical, chemical processing, education, healthcare, government, technology and hospitality. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability. Pay: $120,000.00 - $140,00.00 per yearApply for this ad Online! ....Read more...
Type: Permanent Location: Richmond, Missouri Posted: 2026-08-05 15:12:07 -
Corporate Manager - EH&S
JOB DESCRIPTION Position Summary: This position is responsible for developing, instituting, and overseeing all aspects of Environmental, Health, Safety and Corporate Compliance. This includes but is not limited to ensuring the company complies with all federal and state health, safety and environmental laws, regulations and reporting standards. Essential Functions: Works with all personnel at the facility to make sure all safety and environmental regulations are met and are being followed; Primarily responsible for both the overview of compliance as well as day-to-day operations with respect to safety and regulatory permits and reports. Ensure all are met with best practices and are compliant. This pertains to Federal, State, and Local regulations i.e. RCRA, EPA reporting requirements both directly to the EPA as well as those governed by Missouri DNR Air Pollution and HAZ WASTE; Conduct and coordinate on-site daily inspections to audit physical conditions and safe work practices. Including but not limited to: PPE for specific tasks, Emission Points, Work Permits, General Housekeeping, Spill Kits, Satellite and Pre-Transport Waste Storage Areas, Fire Extinguishers, Shower and Eye Wash, etc.; Be aware concerning all city, state and federal compliance regulations; Conduct and improve training programs related to all aspects of safety and compliance in the facility for all personnel. This includes but not limited to: new employee training and refreshers, forklift safety, OSHA, hazwoper, contractor orientation, FOT/IATA, etc. All training should be conducted in a timely manner and ensure additional process specific trainings are sufficient to maintain safety for employees. Maintain and update all plans required at the facility, including but not limited to: General Operating Permit, Hazardous Waste Generator Compliance, Storm water Pollution Prevention Plan, Spill Prevention Control and Countermeasures, Emergency Response Plan, Compressed Gas Plan, Contingency Plans, Hazard Communication Program and Security Plans; Essential reports such as TRI, Tier II, RMP, Quarterly and Biennial Waste Reporting (and their due dates) is the responsibility of your department. Assistance will be given from other staff to prepare and maintain this data; Participate and help conduct Safety Committee meetings; Works closely with HR manager and Vice President/CFO to become responsible for the hands-on administration of the workers' compensation program. Maintain the OSHA 300 log and tracking. Manage medical monitoring program; Maintain and improve environmental compliance programs related to hazardous wastes, air permitting, water pollution control, and community right-to-know programs; Select and maintain safety equipment and safety supplies on site. To include purchasing and keeping track of the supplies and managing the costs of these supplies; Reduce waste generation and costs of disposal. Upgrade monitoring, testing and instrumentation of waste and byproducts. Schedule and maintain all documentation related to all waste pickups, including certifying and recertifying waste profiles; Improve overall safety, housekeeping and reliability of plant work areas and compliance systems; Member of the PSM team; Implement and coordinate the documentation and schedule for preventative maintenance of equipment through the Faciliworks program. Maintain, create and close work orders. Keep Asset List up to date within Faciliworks database. Train all maintenance personnel on these procedures and manage to ensure proper procedures are followed; Ensure all permits (LOTO, Hot Work, Confined Space Entry), as well as MOC's are done correctly, and properly filed and archived. Become proficient in generating, reviewing and updating SDS's and Labels for our product line. This will be a multi-member team as GHS is being implemented in 2015, however, in 2016 and future years' maintenance of this system will become part of your department; Supervise, coach, motivate and develop staff. Minimum Requirements: Bachelor's degree in environmental management, Chemistry, Engineering, or a related discipline, or high school diploma if degree with 5 years or more of direct experience in Process Safety Management, or suitable combination of education and relevant experience as described; Specialized technical/aptitude experience: minimum of 3 years' experience in a manufacturing environment and demonstrated proficiency with manufacturing processes. Previous work and/or substantial knowledge of, including commonly used concepts, practices and procedures, within the thermoset polymer industry is a strongly considered asset; Demonstrated comprehensive knowledge of office and facilities coordination and basic leadership and management knowledge; (if applicable to position) Demonstrated organization, facilitation, communication and presentation skills; (if applicable to position) Ability to prioritize workflow and organize diverse material and ability to handle multiple, competing and changing priorities; ability to perform effectively without supervision and within established time limits and ongoing deadlines; Ability to interact and communicate effectively and professionally verbally and in writing, and to provide exceptional service internally and externally; Relevant computer skills for this position include knowledge and experience with Microsoft Office applications (Word, Excel, PowerPoint) and web-based applications. Experience using SAGE Platinum for Windows preferred. Displays adaptability in learning the use of relevant software and displays comprehension of fundamental computer practices and database management; Demonstrated ability to serve as a knowledgeable resource to the organization's management team that provides leadership and direction; Demonstrated leadership and vision managing staff groups and major projects or initiatives; Outstanding interpersonal relationship building and employee coaching and development skills. Benefits and Compensation The pay range for applicants in this position generally ranges between $120,000.00/year and $140,000/year. The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law. In addition to career advancement and growth, continuous training, and mentoring opportunities, Arnette Polymers offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans. Arnette Polymers is a division of The Stonhard Group, an RPM International company (NYSE: RPM) that is headquartered in Maple Shade, NJ and has more than 100 years of experience manufacturing and installing high performance, seamless floors throughout the world. We manufacture and install long-term floor, wall and lining solutions to markets including, but not limited to: food & beverage, general manufacturing, pharmaceutical, chemical processing, education, healthcare, government, technology and hospitality. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability. Pay: $120,000.00 - $140,00.00 per yearApply for this ad Online! ....Read more...
Type: Permanent Location: Richmond, Missouri Posted: 2026-08-05 15:11:39 -
Technical Application Support - Lubricants, Oils, Additives
Technical Advisor Specialist - World Class Lubricant Brand West Midlands / Central England / Birmingham Lubricants, Oils & Fuel Additives £48,000 Basic + Bonus | Company Car | Generous Holiday Allowance Industry-Leading Product Training | Ongoing Technical Development | Global Manufacturer Become the Technical Authority Behind a World-Class Lubricants Brand As part of a strategic investment in automotive technical services, we are seeking an experienced Technical Advisor to join a globally recognised manufacturer of premium lubricants, oils and fuel additive technologies. This is a highly visible and influential technical position, acting as the critical link between Product Development, Sales, Marketing and Customer channels across multiple automotive sectors. You will provide expert guidance on product selection, application suitability, technical troubleshooting and performance optimisation, helping customers and colleagues maximise the value of a market-leading product portfolio. If you thrive on solving complex technical challenges and enjoy being recognised as the subject matter expert, this is an opportunity to build your reputation with one of the industry's most respected names. What You'll Be Doing Delivering expert Technical Support to internal sales & marketing teams as well as external customers on our complete product group. Advising on correct Automotive applications aligning product with specifications and applications. Investigating Technical Product issues, diagnosing root causes and recommending effective solutions. Supporting product positioning through delivering Technical Presentations, onsite training and customer engagement. Acting as a trusted technical resource across OEM, Distributor and end-user / Workshop Maintaining technical documentation and ensuring compliance with relevant industry specifications and classifications. Collaborating with colleagues across commercial and technical functions to support business growth and customer satisfaction. What We're Looking For We are seeking a technically accomplished individual with a strong background in lubricants, oils, additive chemistry or Automotive Engine / Drivetrain related technologies. Able to engage and communicate at all levels and delivering “best in class” technical support across the aftermarket channels. Essential Technical Expertise Strong understanding of technical automotive under bonnet applications Knowledge of automotive lubricants would be particularly interesting. Experience interpreting technical documentation, specifications and performance data. Technical application knowledge across sectors such as: Passenger Car Motor Oils (PCMO) Motorcycles Electric Vehicles (EV) Commercial Vehicles Marine Bicycle Agricultural and Off-Highway Equipment Good working knowledge of additive technologies including: Fuel System Cleaners Oil Additives Maintenance Products Problem-Solving Treatments Preferred Background Academic achievement in Chemistry, Mechanical / Automotive Engineering or a related Engineering Genuine passion for automotive technology and vehicle performance. Strong communication, presentation and stakeholder management skills. Flexible approach to office-based work and customer-facing travel when required. Training & Development Representing products manufactured to stringent OEM standards, you'll receive extensive support to deepen your technical expertise and remain at the forefront of lubricant and additive technology. Through ongoing product, industry and technical training, you'll be empowered to become the recognised go-to expert within the business and across the wider customer network. Interested? Register your interest by sending: Your up-to-date CV A brief note outlining why this opportunity aligns with your experience and career aspirations Glen Shepherd 07977266309 REF 4371GSA Technical Advisor / Technical Application Support Glen Callum Associates is committed to creating diverse and inclusive workplaces. We welcome applications from all qualified candidates regardless of gender, age, ethnicity, disability, sexual orientation, or background. We believe that a variety of perspectives makes a team stronger and a workplace better. If you need any adjustments during the recruitment process, please let us know - we're here to support you. ....Read more...
Type: Permanent Location: Birmingham, England Start: ASAP Salary / Rate: £48000 - £50000 per annum + Car + Pension + Generous Holiday Allow Posted: 2026-08-05 10:54:15 -
EH&S Manager
JOB DESCRIPTION Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc. and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems. With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects. GENERAL PURPOSE OF THE JOB: The EHS manager is accountable for the development and implementation of Environmental, Health, Safety, and Security (EHS&S) programs and best practices to ensure compliance with governmental agencies and alignment with Construction Products Group EHS&S standards. ESSENTIAL DUTIES AND RESPONSIBILITIES: Develops and communicates standards of EHS&S code of conduct, ensures mutual understanding, and mitigates exposure to hazardous / undesirable conditions in our business operations and product uses. Leads the development and implementation of comprehensive regulatory compliance programs in the areas of occupational health and safety, hazardous materials management, environmental management, transportation materials safety, security and product compliance. Interprets regulations, develops legislatively compliant, organizationally appropriate standards for Tremco CPG. Conducts EHS&S audits, documents statistics with respect to EHS&S program compliance, and makes recommendations with respect to annual safety program changes and objectives. Represents CPG with professional organizations, regulatory bodies and governmental agencies. Serves as the primary point of contact for Tremco CPG EHS&S business unit operations and associated EHS&S staff. May act as expert witness in the event of investigations and legal proceedings. Maintains up-to-date knowledge and relevant documentation with respect to EHS&S rules, regulations and legislation, as applicable to business operations and product mix. Researches best practices and investigates program innovations, both broadly and with respect to chemicals manufacturing, distribution and disposal, and makes recommendations regarding policy gaps and program improvement opportunities. Prepares recommendations with respect to pending or anticipated changes in legislation, and develops proactive, cost effective program options in support of chemical product and regulatory changes. Travel to and work with Tremco CPG locations as needed to serve as a resource to Tremco CPG operations regarding policies, standards and best practices with respect to EHS&S compliance, hazardous materials management, and product compliance. Develops and implements enterprise-wide programs for EHS&S compliance and delivers tools and training to ensure organizational compliance with regulations and best practices. Identifies and corrects non-code compliant processes by formal audits and makes recommendations to rectify compliance issues and mitigate risk of accident / liability. Ensures that all business units are aware of, and that programs are in place to train and resource employees to comply with Tremco Construction Products Group and RPM EHS&S standards. Assesses EHS&S human resources requirements in medium and long term, and prepares plans to develop and/or recruit needed talent to achieve organization objectives. Prepares, implements and monitors the annual program budget, and takes corrective action on budget variances. Provides analysis and recommendations with respect to financial implications of product, program and regulatory changes, including cost / benefit analysis of program improvements to mitigate the financial impact of EHS&S related accidents / incidents. Establishes regulatory guidelines and performance standards in the areas of EHS&S risks, conducts ongoing audits and reporting with respect to program compliance. Assist the business units with investigating serious EHS&S related accidents, incidents and program and product breaches. Prepares evaluative reports and recommendations, and implements new program measures to mitigate continuing / future risk Provides guidance to business unit leaders to ensure that near and long-term operational plans are compliant with organizational and jurisdictional EHS&S standards. Develops standards to meet ongoing and developing requirements in the areas of training, audit and reporting. As a resource to the management teams, provide feedback to senior management regarding feasibility / advisability of business strategy from a regulatory compliance and EHS&S best practices. EDUCATION REQUIREMENT: Bachelors degree from a 4-year accredited college or university in 4 year College or University degree in Natural Sciences (Chemistry, Engineering, Environmental Sciences, or Safety Sciences) EXPERIENCE REQUIREMENT: 4-10 years' experience leading and contributing to compliance and regulatory policy and program development in a materials processing environment. Formal training in occupational health and safety is a must. CERTIFICATES, LICENSES, REGISTRATIONS: Board of Certified Safety Professionals - Certified Safety Professional certificate. OTHER SKILLS, ABILITIES, AND QUALIFICATIONS: Ability to travel across North America approximately 25% of the time. Broad understanding of regulatory compliance requirements, risk assessment and mitigation programs in multiple (particularly North American) jurisdictions. Ability to inspire others to commit to and achieve EHS&S program goals and performance measures in a production environment with varying levels of literacy and educational background. Ability to develop a business case for new program development / program modification. Ability to manage program administration requirements across multiple, disparate (production, distribution, warehousing, sales, and marketing) divisions. ISO 9001 and 14001 are highly preferred. Bilingual in either English/French or English/Spanish, highly preferred. WORK LOCATION: Will work onsite at one of our manufacturing locations. PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs. BENEFITS AND COMPENSATION: The salary range for applicants in this position generally ranges between $93,000 to $120,000. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia Posted: 2026-08-04 15:11:38 -
EH&S Manager
JOB DESCRIPTION Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc. and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems. With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects. GENERAL PURPOSE OF THE JOB: The EHS manager is accountable for the development and implementation of Environmental, Health, Safety, and Security (EHS&S) programs and best practices to ensure compliance with governmental agencies and alignment with Construction Products Group EHS&S standards. ESSENTIAL DUTIES AND RESPONSIBILITIES: Develops and communicates standards of EHS&S code of conduct, ensures mutual understanding, and mitigates exposure to hazardous / undesirable conditions in our business operations and product uses. Leads the development and implementation of comprehensive regulatory compliance programs in the areas of occupational health and safety, hazardous materials management, environmental management, transportation materials safety, security and product compliance. Interprets regulations, develops legislatively compliant, organizationally appropriate standards for Tremco CPG. Conducts EHS&S audits, documents statistics with respect to EHS&S program compliance, and makes recommendations with respect to annual safety program changes and objectives. Represents CPG with professional organizations, regulatory bodies and governmental agencies. Serves as the primary point of contact for Tremco CPG EHS&S business unit operations and associated EHS&S staff. May act as expert witness in the event of investigations and legal proceedings. Maintains up-to-date knowledge and relevant documentation with respect to EHS&S rules, regulations and legislation, as applicable to business operations and product mix. Researches best practices and investigates program innovations, both broadly and with respect to chemicals manufacturing, distribution and disposal, and makes recommendations regarding policy gaps and program improvement opportunities. Prepares recommendations with respect to pending or anticipated changes in legislation, and develops proactive, cost effective program options in support of chemical product and regulatory changes. Travel to and work with Tremco CPG locations as needed to serve as a resource to Tremco CPG operations regarding policies, standards and best practices with respect to EHS&S compliance, hazardous materials management, and product compliance. Develops and implements enterprise-wide programs for EHS&S compliance and delivers tools and training to ensure organizational compliance with regulations and best practices. Identifies and corrects non-code compliant processes by formal audits and makes recommendations to rectify compliance issues and mitigate risk of accident / liability. Ensures that all business units are aware of, and that programs are in place to train and resource employees to comply with Tremco Construction Products Group and RPM EHS&S standards. Assesses EHS&S human resources requirements in medium and long term, and prepares plans to develop and/or recruit needed talent to achieve organization objectives. Prepares, implements and monitors the annual program budget, and takes corrective action on budget variances. Provides analysis and recommendations with respect to financial implications of product, program and regulatory changes, including cost / benefit analysis of program improvements to mitigate the financial impact of EHS&S related accidents / incidents. Establishes regulatory guidelines and performance standards in the areas of EHS&S risks, conducts ongoing audits and reporting with respect to program compliance. Assist the business units with investigating serious EHS&S related accidents, incidents and program and product breaches. Prepares evaluative reports and recommendations, and implements new program measures to mitigate continuing / future risk Provides guidance to business unit leaders to ensure that near and long-term operational plans are compliant with organizational and jurisdictional EHS&S standards. Develops standards to meet ongoing and developing requirements in the areas of training, audit and reporting. As a resource to the management teams, provide feedback to senior management regarding feasibility / advisability of business strategy from a regulatory compliance and EHS&S best practices. EDUCATION REQUIREMENT: Bachelors degree from a 4-year accredited college or university in 4 year College or University degree in Natural Sciences (Chemistry, Engineering, Environmental Sciences, or Safety Sciences) EXPERIENCE REQUIREMENT: 4-10 years' experience leading and contributing to compliance and regulatory policy and program development in a materials processing environment. Formal training in occupational health and safety is a must. CERTIFICATES, LICENSES, REGISTRATIONS: Board of Certified Safety Professionals - Certified Safety Professional certificate. OTHER SKILLS, ABILITIES, AND QUALIFICATIONS: Ability to travel across North America approximately 25% of the time. Broad understanding of regulatory compliance requirements, risk assessment and mitigation programs in multiple (particularly North American) jurisdictions. Ability to inspire others to commit to and achieve EHS&S program goals and performance measures in a production environment with varying levels of literacy and educational background. Ability to develop a business case for new program development / program modification. Ability to manage program administration requirements across multiple, disparate (production, distribution, warehousing, sales, and marketing) divisions. ISO 9001 and 14001 are highly preferred. Bilingual in either English/French or English/Spanish, highly preferred. WORK LOCATION: Will work onsite at one of our manufacturing locations. PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs. BENEFITS AND COMPENSATION: The salary range for applicants in this position generally ranges between $93,000 to $120,000. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia Posted: 2026-08-04 15:10:42 -
EH&S Manager
JOB DESCRIPTION Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc. and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems. With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects. GENERAL PURPOSE OF THE JOB: The EHS manager is accountable for the development and implementation of Environmental, Health, Safety, and Security (EHS&S) programs and best practices to ensure compliance with governmental agencies and alignment with Construction Products Group EHS&S standards. ESSENTIAL DUTIES AND RESPONSIBILITIES: Develops and communicates standards of EHS&S code of conduct, ensures mutual understanding, and mitigates exposure to hazardous / undesirable conditions in our business operations and product uses. Leads the development and implementation of comprehensive regulatory compliance programs in the areas of occupational health and safety, hazardous materials management, environmental management, transportation materials safety, security and product compliance. Interprets regulations, develops legislatively compliant, organizationally appropriate standards for Tremco CPG. Conducts EHS&S audits, documents statistics with respect to EHS&S program compliance, and makes recommendations with respect to annual safety program changes and objectives. Represents CPG with professional organizations, regulatory bodies and governmental agencies. Serves as the primary point of contact for Tremco CPG EHS&S business unit operations and associated EHS&S staff. May act as expert witness in the event of investigations and legal proceedings. Maintains up-to-date knowledge and relevant documentation with respect to EHS&S rules, regulations and legislation, as applicable to business operations and product mix. Researches best practices and investigates program innovations, both broadly and with respect to chemicals manufacturing, distribution and disposal, and makes recommendations regarding policy gaps and program improvement opportunities. Prepares recommendations with respect to pending or anticipated changes in legislation, and develops proactive, cost effective program options in support of chemical product and regulatory changes. Travel to and work with Tremco CPG locations as needed to serve as a resource to Tremco CPG operations regarding policies, standards and best practices with respect to EHS&S compliance, hazardous materials management, and product compliance. Develops and implements enterprise-wide programs for EHS&S compliance and delivers tools and training to ensure organizational compliance with regulations and best practices. Identifies and corrects non-code compliant processes by formal audits and makes recommendations to rectify compliance issues and mitigate risk of accident / liability. Ensures that all business units are aware of, and that programs are in place to train and resource employees to comply with Tremco Construction Products Group and RPM EHS&S standards. Assesses EHS&S human resources requirements in medium and long term, and prepares plans to develop and/or recruit needed talent to achieve organization objectives. Prepares, implements and monitors the annual program budget, and takes corrective action on budget variances. Provides analysis and recommendations with respect to financial implications of product, program and regulatory changes, including cost / benefit analysis of program improvements to mitigate the financial impact of EHS&S related accidents / incidents. Establishes regulatory guidelines and performance standards in the areas of EHS&S risks, conducts ongoing audits and reporting with respect to program compliance. Assist the business units with investigating serious EHS&S related accidents, incidents and program and product breaches. Prepares evaluative reports and recommendations, and implements new program measures to mitigate continuing / future risk Provides guidance to business unit leaders to ensure that near and long-term operational plans are compliant with organizational and jurisdictional EHS&S standards. Develops standards to meet ongoing and developing requirements in the areas of training, audit and reporting. As a resource to the management teams, provide feedback to senior management regarding feasibility / advisability of business strategy from a regulatory compliance and EHS&S best practices. EDUCATION REQUIREMENT: Bachelors degree from a 4-year accredited college or university in 4 year College or University degree in Natural Sciences (Chemistry, Engineering, Environmental Sciences, or Safety Sciences) EXPERIENCE REQUIREMENT: 4-10 years' experience leading and contributing to compliance and regulatory policy and program development in a materials processing environment. Formal training in occupational health and safety is a must. CERTIFICATES, LICENSES, REGISTRATIONS: Board of Certified Safety Professionals - Certified Safety Professional certificate. OTHER SKILLS, ABILITIES, AND QUALIFICATIONS: Ability to travel across North America approximately 25% of the time. Broad understanding of regulatory compliance requirements, risk assessment and mitigation programs in multiple (particularly North American) jurisdictions. Ability to inspire others to commit to and achieve EHS&S program goals and performance measures in a production environment with varying levels of literacy and educational background. Ability to develop a business case for new program development / program modification. Ability to manage program administration requirements across multiple, disparate (production, distribution, warehousing, sales, and marketing) divisions. ISO 9001 and 14001 are highly preferred. Bilingual in either English/French or English/Spanish, highly preferred. WORK LOCATION: Will work onsite at one of our manufacturing locations. PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs. BENEFITS AND COMPENSATION: The salary range for applicants in this position generally ranges between $93,000 to $120,000. This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia Posted: 2026-08-04 15:10:39 -
LCMS Technical Sales Specialist
ROLE OVERVIEW We are currently looking for an LCMS Technical Sales Specialist to join a leading provider of analytical instrumentation based in the UK. This role will cover the Central West of the UK. This is an exciting opportunity for a technically skilled professional to contribute to the growth of our clients mass spectrometry business by delivering tailored solutions and exceptional customer support. The role offers a chance to work at the forefront of innovative technologies that support healthcare, environmental wellbeing, and scientific progress. In this position, you will be actively involved in driving revenue through direct sales of LC-MS/MS, HRMS, and MALDI solutions, collaborating closely with internal teams, and providing vital technical expertise to customers. If you are passionate about analytical science and thrive in a dynamic, customer-focused environment, this could be the perfect next step for your career. KEY DUTIES AND RESPONSIBILITIES Your duties as the LCMS Technical Sales Specialist will be varied however the key duties and responsibilities are as follows: Drive the growth of our clients mass spectrometry solutions by promoting and selling their range of instruments, achieving or exceeding sales targets. Lead technical and commercial discussions with customers to evaluate their needs, recommend suitable solutions, and guide them through the sales process from initial contact to closure. Collaborate with internal teams such as service, product specialists, and marketing to develop tailored business plans, deliver customer demonstrations, and support marketing initiatives. Prepare and present technical proposals, application reports, and solution demonstrations to showcase the value of our clients technology and differentiate from competitors. Provide ongoing customer support, application advice, and training to ensure optimal use of instruments and foster long-term relationships. As the LCMS Technical Sales Specialist you will maintain accurate CRM records, support pipeline management, and contribute to market intelligence gathering. ROLE REQUIREMENTS To be successful in your application to this exciting role as the LCMS Technical Sales Specialist we are looking to identify the following on your profile and past history: A Degree or higher level in scientific disciplines such as chemistry, analytical chemistry, pharmacy, biochemistry, or a related field. Proven technical knowledge and practical experience in solution selling, with a strong background in LC-MS systems and mass spectrometry applications. Hands-on laboratory experience with chromatography and mass spectrometry techniques. A solid understanding of mass spectrometry and chromatography theory, with familiarity with software systems and the ability to learn new systems quickly. Willingness to travel regularly within the territory and occasional international travel for training and conferences. WHATS IN IT FOR YOU? Joining our client means becoming part of a forward-thinking, innovative organization dedicated to scientific excellence. Benefits include a competitive salary package with on-target earnings, a company vehicle, structured ongoing training, private healthcare, pension scheme, generous annual leave, and a supportive work environment focused on professional development and career progression. Key Words: sales / mass spectrometry / LC-MS/MS / HRMS / MALDI / technical support / customer engagement / solutions-selling / laboratory techniques / scientific knowledge / territory management "Hyper Recruitment Solutions Ltd (HRS) is an Equal Opportunities employer. We welcome applications from anyone who meets the role requirements. HRS exclusively supports the STEM sectors, combining recruitment expertise with scientific knowledge to help you advance your career". ....Read more...
Type: Permanent Location: Birmingham,England Start: 03/08/2026 Salary / Rate: £0 - £60000 per annum, Benefits: Company car, OTE Posted: 2026-08-03 23:13:04 -
Product Manager - Automotive
JOB DESCRIPTION Job Title: Product Manager - Automotive Location: Vernon Hills, IL Department: Product Management Reports To: Director Product Management, Automotive Direct Reports/Manages others: No Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry. We offer a wide range of products including decorative fashion paints and finishes, durable industrial, roof repair, and flooring coatings and, of course, our famous rust-fighting formula that started it all. Summary: As Product Manager for the Automotive category, you will own strategy, innovation, and portfolio performance for a key growth segment of the business. This role blends consumer insight, technical product development, and commercial execution to deliver differentiated solutions for both DIY and professional users. You will identify market opportunities, lead new product development, and bring compelling innovation(s) to market in partnership with cross-functional teams. This is a highly visible role with direct impact on category growth, brand strength, and consumer experience. Responsibilities: Strategy Development: Define and execute long-term product strategies that align with business growth goals; including development of an innovation roadmap, completion of competitive analysis, and evaluation of market trends. Create the 3-to-5-year strategic product plan that translates into actionable 0-2 year functional, business and marketing plans Assist sales and finance functions with annual budget processes Perform strategic periodic reviews of the product line analyzing it from a financial, market, competitor and user perspective Identify initiatives for revenue growth and margin expansion for the product line(s) Coordinate a cross functional team to select initiatives based on P&L impact and financial investment to build into the platform's 1-3 year action plan Innovation Leadership: Lead the ideation and development of unique breakthrough products and enhancements that set the standard in the category. Growth Acceleration: Identify and capitalize on opportunities to expand market share, drive revenue, and increase brand relevance. Brand Activation: Partner with marketing to bring the brand to life through compelling content, storytelling, positioning, packaging, and go-to-market campaigns. Subject Matter Expert on assigned product line(s), with deep understanding of the product, chemistry, users, customer requirements and emerging trends Team Collaboration: Work cross-functionally with R&D, sales, operations, and customer insights to ensure seamless execution and continuous improvement. Partner with sales teams to provide them with the tools and information needed to effectively sell innovative Automotive products. Develop sales materials, presentations, and training programs. Direct market research and market intelligence gathering to ensure understanding of applications, users, competition, and market trends. Analyze and leverage data and insights to develop and formulate category and product recommendations. Conduct early-stage opportunity assessment, ideation and concept development for a new product opportunity from ideation to market launch. Driving new product development activities through Stage-Gate process. Define and develop product positioning, messaging, feature specifications, unique selling proposition and pricing strategies. Travel is approximately 5-10% annually for customer presentations, trade shows, etc. Qualifications: Bachelor's degree in Business, Marketing, or related field; MBA a plus 6+ years of relevant Product Development or Brand experience (Automotive Aftermarket experience preferred). Strong new product development experience required. Exhibit understanding of the product commercialization process and documentation and information sharing needs and protocols. Exhibit understanding of retail, automotive aftermarket, and hardware/distribution business models. Strong project management skills with the ability to manage multiple projects simultaneously. Passionate problem solver and creative thinker, with ability to pitch new ideas and be open to feedback. Analytic and strategic thinking skills, with ability to digest complex information and make data-driven decisions. Team player who will work well on cross-functional teams including Operations, Finance, Sales, Research & Development, Customer Service, etc. Confident public speaker with the ability to influence senior level management. Leadership Traits Technical Understanding & Business Acumen: Knows the business and the mission-critical technical and functional skills to perform the job at a high level. Understands various types of business propositions and how the business operates. Learn new methods and technologies easily. Learning Agility: Learns quickly when facing new problems. Is a relentless and versatile learner and is open to change. Enjoys the challenge of unfamiliar tasks and can quickly discern the underlying structure of anything. Strategic Agility: See ahead clearly and can anticipate future consequences and trends. Is future oriented and offers broad knowledge and perspective. Can scenario plan possibilities and outcomes. Leadership: Provides the essential critical thinking to determine the necessary approaches to get things done. Offers good judgement about which creative ideas and suggestions will work; can facilitate effective brainstorming, can project how potential ideas could play out in the marketplace. Create New & Different: Ability to recognize the next great breakthrough. Is creative, visionary, and can create and bring exciting ideas to market. Action Oriented: Enjoys working hard and is full of energy, steadfastly pushing self and other for results. Can be counted on to exceed goals successfully and is consistently a top performer. Financial Acumen: Has demonstrated financial acumen, can successfully budget and forecast, and understands cost implications of decisions. Effective project management skills Excellent communication skills to all levels of the organization. Strong interpersonal, verbal and written communication skills. Is clear, concise and persuasive. Experience creating and presenting business proposals, handling objections and overcoming obstacles Salary Target Range: $90,000 - $120,000, bonus eligible From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave. We also offer a 401(k) plan after three months of employment and offer a company match. Associates are vested in the RPM Pension plan after completing five years of service. Rust-Oleum offers nine paid holidays and two floating holidays per year. You are also eligible to earn three weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Vernon Hills, Illinois Posted: 2026-08-03 15:12:00 -
Product Manager - Automotive
JOB DESCRIPTION Job Title: Product Manager - Automotive Location: Vernon Hills, IL Department: Product Management Reports To: Director Product Management, Automotive Direct Reports/Manages others: No Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry. We offer a wide range of products including decorative fashion paints and finishes, durable industrial, roof repair, and flooring coatings and, of course, our famous rust-fighting formula that started it all. Summary: As Product Manager for the Automotive category, you will own strategy, innovation, and portfolio performance for a key growth segment of the business. This role blends consumer insight, technical product development, and commercial execution to deliver differentiated solutions for both DIY and professional users. You will identify market opportunities, lead new product development, and bring compelling innovation(s) to market in partnership with cross-functional teams. This is a highly visible role with direct impact on category growth, brand strength, and consumer experience. Responsibilities: Strategy Development: Define and execute long-term product strategies that align with business growth goals; including development of an innovation roadmap, completion of competitive analysis, and evaluation of market trends. Create the 3-to-5-year strategic product plan that translates into actionable 0-2 year functional, business and marketing plans Assist sales and finance functions with annual budget processes Perform strategic periodic reviews of the product line analyzing it from a financial, market, competitor and user perspective Identify initiatives for revenue growth and margin expansion for the product line(s) Coordinate a cross functional team to select initiatives based on P&L impact and financial investment to build into the platform's 1-3 year action plan Innovation Leadership: Lead the ideation and development of unique breakthrough products and enhancements that set the standard in the category. Growth Acceleration: Identify and capitalize on opportunities to expand market share, drive revenue, and increase brand relevance. Brand Activation: Partner with marketing to bring the brand to life through compelling content, storytelling, positioning, packaging, and go-to-market campaigns. Subject Matter Expert on assigned product line(s), with deep understanding of the product, chemistry, users, customer requirements and emerging trends Team Collaboration: Work cross-functionally with R&D, sales, operations, and customer insights to ensure seamless execution and continuous improvement. Partner with sales teams to provide them with the tools and information needed to effectively sell innovative Automotive products. Develop sales materials, presentations, and training programs. Direct market research and market intelligence gathering to ensure understanding of applications, users, competition, and market trends. Analyze and leverage data and insights to develop and formulate category and product recommendations. Conduct early-stage opportunity assessment, ideation and concept development for a new product opportunity from ideation to market launch. Driving new product development activities through Stage-Gate process. Define and develop product positioning, messaging, feature specifications, unique selling proposition and pricing strategies. Travel is approximately 5-10% annually for customer presentations, trade shows, etc. Qualifications: Bachelor's degree in Business, Marketing, or related field; MBA a plus 6+ years of relevant Product Development or Brand experience (Automotive Aftermarket experience preferred). Strong new product development experience required. Exhibit understanding of the product commercialization process and documentation and information sharing needs and protocols. Exhibit understanding of retail, automotive aftermarket, and hardware/distribution business models. Strong project management skills with the ability to manage multiple projects simultaneously. Passionate problem solver and creative thinker, with ability to pitch new ideas and be open to feedback. Analytic and strategic thinking skills, with ability to digest complex information and make data-driven decisions. Team player who will work well on cross-functional teams including Operations, Finance, Sales, Research & Development, Customer Service, etc. Confident public speaker with the ability to influence senior level management. Leadership Traits Technical Understanding & Business Acumen: Knows the business and the mission-critical technical and functional skills to perform the job at a high level. Understands various types of business propositions and how the business operates. Learn new methods and technologies easily. Learning Agility: Learns quickly when facing new problems. Is a relentless and versatile learner and is open to change. Enjoys the challenge of unfamiliar tasks and can quickly discern the underlying structure of anything. Strategic Agility: See ahead clearly and can anticipate future consequences and trends. Is future oriented and offers broad knowledge and perspective. Can scenario plan possibilities and outcomes. Leadership: Provides the essential critical thinking to determine the necessary approaches to get things done. Offers good judgement about which creative ideas and suggestions will work; can facilitate effective brainstorming, can project how potential ideas could play out in the marketplace. Create New & Different: Ability to recognize the next great breakthrough. Is creative, visionary, and can create and bring exciting ideas to market. Action Oriented: Enjoys working hard and is full of energy, steadfastly pushing self and other for results. Can be counted on to exceed goals successfully and is consistently a top performer. Financial Acumen: Has demonstrated financial acumen, can successfully budget and forecast, and understands cost implications of decisions. Effective project management skills Excellent communication skills to all levels of the organization. Strong interpersonal, verbal and written communication skills. Is clear, concise and persuasive. Experience creating and presenting business proposals, handling objections and overcoming obstacles Salary Target Range: $90,000 - $120,000, bonus eligible From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave. We also offer a 401(k) plan after three months of employment and offer a company match. Associates are vested in the RPM Pension plan after completing five years of service. Rust-Oleum offers nine paid holidays and two floating holidays per year. You are also eligible to earn three weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Vernon Hills, Illinois Posted: 2026-08-03 15:11:59
-
Technician I - Testing
JOB DESCRIPTION Title: Testing Technician Summary: Support the Research & Development laboratory team in the development, modification, and evaluation of high-performance corrosion-resistant coatings, linings, and fireproofing products. This role reports directly to the Testing Supervisor or senior lab personnel and plays a key part in ensuring product quality and innovation. The Technician I will perform routine laboratory testing, conduct quality control evaluations, grade test panels, c ....Read more...
Type: Permanent Location: St. Louis, Missouri Posted: 2026-08-08 23:11:38 -
Technician I - Testing
JOB DESCRIPTION Title: Testing Technician Summary: Support the Research & Development laboratory team in the development, modification, and evaluation of high-performance corrosion-resistant coatings, linings, and fireproofing products. This role reports directly to the Testing Supervisor or senior lab personnel and plays a key part in ensuring product quality and innovation. The Technician I will perform routine laboratory testing, conduct quality control evaluations, grade test panels, c ....Read more...
Type: Permanent Location: St. Louis, Missouri Posted: 2026-08-08 23:11:37 -
Sr. Field Technical Service Representative
JOB DESCRIPTION Company Information RPM Industrial Coatings Group is home to 11 industry-leading coatings and finishing brands. Our dynamic portfolio includes liquid coatings, powder coatings, touch-up and repair products, sundries, adjuvants, and much more. You'll find our products around the globe in industries from architecture and automotive to farming, forestry, marine, and more. RPM Industrial Coatings Group is part of RPM International Inc., a $7.9 billion global company with subsidi ....Read more...
Type: Permanent Location: Little Rock, Arkansas Posted: 2026-08-07 23:12:06 -
Field Technical Representative - South California
JOB DESCRIPTION The Technical Sales Rep ensures that the assigned revenue, margin and product mix objectives, within the corporate business framework, are met or exceeded. This is to be accomplished by securing, developing, and managing key architects, designers, general contractors, distributors, subcontractors, and end-user accounts. This position will also own and manage all related performance and service metrics for the assigned accounts for San Jose, CA region. This position is in the ....Read more...
Type: Permanent Location: Santa Ana, California Posted: 2026-08-07 15:34:10 -
Field Technical Representative - South California
JOB DESCRIPTION The Technical Sales Rep ensures that the assigned revenue, margin and product mix objectives, within the corporate business framework, are met or exceeded. This is to be accomplished by securing, developing, and managing key architects, designers, general contractors, distributors, subcontractors, and end-user accounts. This position will also own and manage all related performance and service metrics for the assigned accounts for San Jose, CA region. This position is in the ....Read more...
Type: Permanent Location: Santa Ana, California Posted: 2026-08-07 15:28:06 -
Sr. Chemist
JOB DESCRIPTION Company Information RPM Industrial Coatings Group is home to 11 industry-leading coatings and finishing brands. Our dynamic portfolio includes liquid coatings, powder coatings, touch-up and repair products, sundries, adjuvants, and much more. You'll find our products around the globe in industries from architecture and automotive to farming, forestry, marine, and more. RPM Industrial Coatings Group is part of RPM International Inc., a $7.3 billion global company with subsidi ....Read more...
Type: Permanent Location: Greensboro, North Carolina Posted: 2026-08-07 15:26:50 -
Sr. Field Technical Service Representative
JOB DESCRIPTION Company Information RPM Industrial Coatings Group is home to 11 industry-leading coatings and finishing brands. Our dynamic portfolio includes liquid coatings, powder coatings, touch-up and repair products, sundries, adjuvants, and much more. You'll find our products around the globe in industries from architecture and automotive to farming, forestry, marine, and more. RPM Industrial Coatings Group is part of RPM International Inc., a $7.9 billion global company with subsidi ....Read more...
Type: Permanent Location: Little Rock, Arkansas Posted: 2026-08-07 15:26:41 -
Sr. Field Technical Service Representative
JOB DESCRIPTION Company Information RPM Industrial Coatings Group is home to 11 industry-leading coatings and finishing brands. Our dynamic portfolio includes liquid coatings, powder coatings, touch-up and repair products, sundries, adjuvants, and much more. You'll find our products around the globe in industries from architecture and automotive to farming, forestry, marine, and more. RPM Industrial Coatings Group is part of RPM International Inc., a $7.9 billion global company with subsidi ....Read more...
Type: Permanent Location: Little Rock, Arkansas Posted: 2026-08-07 15:16:07 -
Sr. Chemist
JOB DESCRIPTION Company Information RPM Industrial Coatings Group is home to 11 industry-leading coatings and finishing brands. Our dynamic portfolio includes liquid coatings, powder coatings, touch-up and repair products, sundries, adjuvants, and much more. You'll find our products around the globe in industries from architecture and automotive to farming, forestry, marine, and more. RPM Industrial Coatings Group is part of RPM International Inc., a $7.3 billion global company with subsidi ....Read more...
Type: Permanent Location: Greensboro, North Carolina Posted: 2026-08-07 15:13:46 -
Sr. Chemist
JOB DESCRIPTION Company Information RPM Industrial Coatings Group is home to 11 industry-leading coatings and finishing brands. Our dynamic portfolio includes liquid coatings, powder coatings, touch-up and repair products, sundries, adjuvants, and much more. You'll find our products around the globe in industries from architecture and automotive to farming, forestry, marine, and more. RPM Industrial Coatings Group is part of RPM International Inc., a $7.3 billion global company with subsidi ....Read more...
Type: Permanent Location: Greensboro, North Carolina Posted: 2026-08-07 15:13:42 -
Field Technical Representative - South California
JOB DESCRIPTION The Technical Sales Rep ensures that the assigned revenue, margin and product mix objectives, within the corporate business framework, are met or exceeded. This is to be accomplished by securing, developing, and managing key architects, designers, general contractors, distributors, subcontractors, and end-user accounts. This position will also own and manage all related performance and service metrics for the assigned accounts for San Jose, CA region. This position is in the ....Read more...
Type: Permanent Location: Santa Ana, California Posted: 2026-08-07 15:13:05 -
R&D Scientist & Technical Leader - Waterborne
JOB DESCRIPTION We are seeking an R&D Scientist and Technical Leader, a critical role within our R&D organization. If you have expertise in waterborne chemistry and formulations knowledge in both architectural and industrial products, this is the opportunity you've been looking for. You should also have an expert level of technical knowledge with a strong track record of product and process development, innovation, and commercialization in coating technologies. You must also possess strong, ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin Posted: 2026-08-06 15:15:30 -
R&D Scientist & Technical Leader - Waterborne
JOB DESCRIPTION We are seeking an R&D Scientist and Technical Leader, a critical role within our R&D organization. If you have expertise in waterborne chemistry and formulations knowledge in both architectural and industrial products, this is the opportunity you've been looking for. You should also have an expert level of technical knowledge with a strong track record of product and process development, innovation, and commercialization in coating technologies. You must also possess strong, ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin Posted: 2026-08-06 15:13:31 -
R&D Scientist & Technical Leader - Waterborne
JOB DESCRIPTION We are seeking an R&D Scientist and Technical Leader, a critical role within our R&D organization. If you have expertise in waterborne chemistry and formulations knowledge in both architectural and industrial products, this is the opportunity you've been looking for. You should also have an expert level of technical knowledge with a strong track record of product and process development, innovation, and commercialization in coating technologies. You must also possess strong, ....Read more...
Type: Permanent Location: Pleasant Prairie, Wisconsin Posted: 2026-08-06 15:11:38 -
Chief Technologist â Synthetic Therapeutics
ROLE OVERVIEW Are you a seasoned technical expert in synthetic therapeutics looking to shape the future of a leading organisation? A leading company in the industry is seeking a Chief Technologist Synthetic Therapeutics to join their Glasgow facility, initially on a 20 month fixed term contract (with a possibility of it becoming a permanent role). This newly created role offers the unique chance to build and lead a cutting-edge capability in peptides, oligonucleotides, and oligo c ....Read more...
Type: Permanent Location: Scotland,Scotland Start: 05/08/2026 Salary / Rate: £64000 - £84000 per annum, Benefits: Dependent on experience Posted: 2026-08-05 21:21:03 -
Corporate Manager - EH&S
JOB DESCRIPTION Position Summary: This position is responsible for developing, instituting, and overseeing all aspects of Environmental, Health, Safety and Corporate Compliance. This includes but is not limited to ensuring the company complies with all federal and state health, safety and environmental laws, regulations and reporting standards. Essential Functions: Works with all personnel at the facility to make sure all safety and environmental regulations are met and are being follo ....Read more...
Type: Permanent Location: Richmond, Missouri Posted: 2026-08-05 15:12:30 -
Corporate Manager - EH&S
JOB DESCRIPTION Position Summary: This position is responsible for developing, instituting, and overseeing all aspects of Environmental, Health, Safety and Corporate Compliance. This includes but is not limited to ensuring the company complies with all federal and state health, safety and environmental laws, regulations and reporting standards. Essential Functions: Works with all personnel at the facility to make sure all safety and environmental regulations are met and are being follo ....Read more...
Type: Permanent Location: Richmond, Missouri Posted: 2026-08-05 15:12:07 -
Corporate Manager - EH&S
JOB DESCRIPTION Position Summary: This position is responsible for developing, instituting, and overseeing all aspects of Environmental, Health, Safety and Corporate Compliance. This includes but is not limited to ensuring the company complies with all federal and state health, safety and environmental laws, regulations and reporting standards. Essential Functions: Works with all personnel at the facility to make sure all safety and environmental regulations are met and are being follo ....Read more...
Type: Permanent Location: Richmond, Missouri Posted: 2026-08-05 15:11:39 -
Technical Application Support - Lubricants, Oils, Additives
Technical Advisor Specialist - World Class Lubricant Brand West Midlands / Central England / Birmingham Lubricants, Oils & Fuel Additives £48,000 Basic + Bonus | Company Car | Generous Holiday Allowance Industry-Leading Product Training | Ongoing Technical Development | Global Manufacturer Become the Technical Authority Behind a World-Class Lubricants Brand As part of a strategic investment in automotive technical services, we are seeking an experienced Technical Advisor to join a glo ....Read more...
Type: Permanent Location: Birmingham, England Start: ASAP Salary / Rate: £48000 - £50000 per annum + Car + Pension + Generous Holiday Allow Posted: 2026-08-05 10:54:15 -
EH&S Manager
JOB DESCRIPTION Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc. and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems. With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supporte ....Read more...
Type: Permanent Location: Columbus, Georgia Posted: 2026-08-04 15:11:38 -
EH&S Manager
JOB DESCRIPTION Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc. and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems. With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supporte ....Read more...
Type: Permanent Location: Columbus, Georgia Posted: 2026-08-04 15:10:42 -
EH&S Manager
JOB DESCRIPTION Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc. and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems. With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supporte ....Read more...
Type: Permanent Location: Columbus, Georgia Posted: 2026-08-04 15:10:39 -
LCMS Technical Sales Specialist
ROLE OVERVIEW We are currently looking for an LCMS Technical Sales Specialist to join a leading provider of analytical instrumentation based in the UK. This role will cover the Central West of the UK. This is an exciting opportunity for a technically skilled professional to contribute to the growth of our clients mass spectrometry business by delivering tailored solutions and exceptional customer support. The role offers a chance to work at the forefront of innovative technologies that ....Read more...
Type: Permanent Location: Birmingham,England Start: 03/08/2026 Salary / Rate: £0 - £60000 per annum, Benefits: Company car, OTE Posted: 2026-08-03 23:13:04 -
Product Manager - Automotive
JOB DESCRIPTION Job Title: Product Manager - Automotive Location: Vernon Hills, IL Department: Product Management Reports To: Director Product Management, Automotive Direct Reports/Manages others: No Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry. We offer a wide range of products including decorative fashion paints and finishes, durable industrial, roof repair, and flooring coatings and, of course, our famous rust-fight ....Read more...
Type: Permanent Location: Vernon Hills, Illinois Posted: 2026-08-03 15:12:00 -
Product Manager - Automotive
JOB DESCRIPTION Job Title: Product Manager - Automotive Location: Vernon Hills, IL Department: Product Management Reports To: Director Product Management, Automotive Direct Reports/Manages others: No Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry. We offer a wide range of products including decorative fashion paints and finishes, durable industrial, roof repair, and flooring coatings and, of course, our famous rust-fight ....Read more...
Type: Permanent Location: Vernon Hills, Illinois Posted: 2026-08-03 15:11:59