-
JOB DESCRIPTION
The Process Engineer is responsible for evaluating and improving processes within Stonhard manufacturing operations.
Additionally, the Process Engineer is responsible for implementation of continuous improvement initiatives, capital project support, production efficiency, maintenance process improvements, and equipment reliability.
Essential Functions
Lead root cause analysis for process failures.
Develop and maintain standard work instructions.
Develop and maintain Process Failure Mode Effect Analysis for areas of responsibility.
Improves production line efficiency to show a measurable increase in OEE.
Support maintenance in equipment troubleshooting.
Working knowledge of I/O, PLC, and 24V controls is preferred.
Programming a plus.
Experience with Manufacturing Execution Systems preferred.
Design and coordinate fabrication of manufacturing support components.
Support day-to-day production operations.
Re-engineer existing equipment to meet new optimization, reliability, safety, throughput, and process requirements.
Evaluate and make recommendations, which will increase output and decrease costs by addressing/improving workflow, ergonomics, time/motion characteristics, cycle-times, set-up times, waste, etc.
Confer with management and general staff to implement plans and recommendations.
Ensure CI project goals are met and sustained through the development of effective control plans.
Ensure Continuous Improvement processes and procedures are followed and adhered to through auditing and process confirmation practices.
Lead C.I.
initiatives in areas of 5S, Waste Reduction, Value-Stream Mapping, etc.
Ensure appropriate validations are completed as part of solution implementation.
Downtime Loss Analysis and Reduction - Start-up & Changeovers downtime improvement
Equipment failure (Structured failure analysis 5W's, Fishbone analysis)
Minimum Requirements
Bachelor's degree in engineering
Lean and/or Six Sigma preferred but not required.
Minimum 5 years of manufacturing experience preferably in a GMP environment.
Physical Requirements
While performing the duties of this position, the employee is regularly required to use hands to finger, handle, or feel and talk or hear.
The employee is frequently required to stand; walk and reach with hands and arms.
The employee is occasionally required to sit; stoop, kneel, crouch, or crawl.
The employee must regularly lift and /or move up to 10-25 pounds; frequently lift and/or move up to 50 pounds.
Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and ability to adjust focus.
Benefits and Compensation
The pay range for applicants in this position generally ranges between $65,000 and $75,000.
The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law.
In addition to career advancement and growth, continuous training, and mentoring opportunities, Stonhard offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Fort Wayne, Indiana
Posted: 2026-10-16 15:15:37
-
Are you a Qualified F-Gas Category 1 Engineer with both commercial and domestic experience? This could be a great opportunity for you!
An opportunity has arisen for an Air Conditioning Engineer to join a family-run heating, cooling and HVAC company, providing installation, servicing and repair services for domestic and commercial properties.
Location: the ideal candidates will be based in West/North-West London, Hertfordshire, or surrounding areas.
Engineers travel directly from home to customer sites, with no Central London work required.
This full-time, permanent PAYE position offers a basic salary of £50,000-£55,000, negotiable for the right candidate, plus benefits.
Candidates with strong commercial and domestic air conditioning experience will be considered, even if they have limited experience with chillers, ventilation or electrical installations
Key Responsibilities
* Install domestic and commercial split, multi-split and VRF/VRV air conditioning systems.
* Service and maintain air conditioning and refrigeration equipment across residential and commercial sites.
* Diagnose faults and carry out repairs on air conditioning and associated systems.
* Undertake planned maintenance and respond to breakdowns, including work on commercial chillers and ventilation equipment where required.
* Carry out refrigerant checks, testing and commissioning, along with electrical tasks where appropriately qualified and competent.
* Complete service reports, maintain safe working practices
* Perform other duties as required.
The candidates from the following background will be considered:
* Air Conditioning Engineer, HVAC Engineer, HVAC & Refrigeration Engineer, Air Conditioning and Refrigeration Engineer, Refrigeration and Air Conditioning Engineer, Air Conditioning Service Engineer, Air Conditioning Installation Engineer, AC Engineer
What We Are Looking For
* F-Gas Category 1 qualification.
* Proven experience with both domestic and commercial air conditioning systems.
* Experience installing, servicing and repairing air conditioning equipment.
* Strong diagnostic and fault-finding skills.
* A good understanding of refrigeration principles and electrical controls.
* Ability to manage workloads and work independently.
* Full UK driving licence.
Whats on offer
* Competitive salary.
* Overtime opportunities.
* Company van, fuel card, tools and equipment.
* Company pension.
* Paid annual leave plus bank holidays.
* Christmas bonus.
* Employee discounts and benefits portal.
* Employee mentoring programme
* Financial planning services
* Free or subsidised travel
* Gym membership
* Health & wellbeing programme
* Referral programme
* Sick pay
* Store discount
* Manufacturer training and ongoing professional development.
* Full-time PAYE employment.
This is an excellent opportunity for an HVAC & Refrigeration Engineer to broaden their experience across domestic and commercial systems while developing their technical skills and career.
Important Information: We endeavour to process your personal data in a fair and transparent manner.
In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone, or text message.
For more information see our Privacy Policy on our website.
It is important you are aware of your individual rights and the provisions the company has put in place to protect your data.
If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Type: Permanent Location: Watford,Harrow, West london, North West London, Home counties, England
Start:
Duration:
Salary / Rate: £50000 - £55000 Per Annum
Posted: 2026-10-16 14:57:14
-
Job Title: Electrical Maintenance Engineer
Location: Leicester Job Reference: JBTLEI Job Type: Contract Duration: ongoing
Shift: Monday to friday rotational shifts
Rate: £36+ per hour outside of IR35 Job Description - Electrical maintenance engineer
My Client is a leading manufacturing site looking for Electrical maintenance engineer with FMCG experience to join on both an ongoing basis.
Duties as a Electrical maintenance engineer: Reacting to breakdowns both electrically and mechanically, fault finding, analysing and continuously improving the site.
Work closely with other departments to improve the site.
Attend meetings as required, analyse data and find solutions to improve equipment performance whilst ensuring safe working practice and full communications are maintained at all times.
In addition, you will be involved in projects within the business to develop an effective engineering install and commissioning.
PLC fault finding Requirements as a Electrical maintenance engineer: A formal qualification in an electrical or mechanical engineering subject (apprentice served, NVQ, HNC or equivalent) Strong electrical experience preferable within a FMCG environment.
Knowledge / experience of working with controls, analysing faults and providing solutions.
Experience of both reactive and preventative maintenance Good technical ability relating to automation hardware and software.
Strong organisation and communication skills and the ability to work in a multi-disciplined team of varying levels of technical experience.
please apply ASAP if you are interested in this eletcrical maintenance engineer position ....Read more...
Type: Contract Location: Leicester, England
Salary / Rate: £36 - £37 per hour
Posted: 2026-10-16 11:01:57
-
Information Security Manager
3-month contract
Central London or Birmingham (hybrid working)
Up to £650 per day (inside IR35)
IT Information Security Manager sought by a well-known, public-facing organisation operating across a complex and critical transport environment, providing services to hundreds of thousands of customers.
As part of a Critical National Infrastructure environment, the IT Information Security Manager will play a crucial role in the day-to-day management of the technical cyber security landscape, SOC services and wider information security management.
Reporting to the Head of IT and managing an IT Security Operations Engineer, this is a hands-on leadership role with responsibility for ensuring appropriate cyber security controls are in place, managing security risk and incidents, and maintaining ongoing compliance with relevant regulatory frameworks and industry standards.
Key Responsibilities
, Work with the Head of IT to create, maintain and deliver a robust Cyber Security Roadmap to minimise organisational risk
, Develop and maintain the Information Security Strategy, security policies and procedures
, Provide day-to-day oversight of the technical cyber security environment and associated security controls
, Manage the organisation's third-party SOC service, ensuring effective monitoring, escalation and response
, Take ownership of cyber security incidents, coordinating prompt technical response, remediation and mitigation
, Embed Security by Design principles across technology projects and initiatives
, Drive a strong culture of IT and cyber security awareness and responsibility across the organisation
, Conduct ongoing security threat, risk, capability and maturity assessments
, Manage vulnerability management, penetration testing schedules, remediation activities and threat intelligence
, Maintain and develop incident management processes and security playbooks
, Conduct and respond to security audits and support ongoing regulatory and standards compliance
, Support the implementation and ongoing management of ISO 27001, including gap analysis and remediation
, Oversee areas including patch management, PCI DSS, NIS, GDPR and data protection
, Engage and manage specialist third-party security providers across areas such as penetration testing, forensic analysis and security auditing
, Provide clear security reporting to senior stakeholders
Required Experience
, Previous experience working in a Cyber Security Manager, Information Security Manager, Cyber Risk Manager, Cyber Threat Manager, IT Security Manager or similar role
, Strong experience spanning both information security strategy/framework management and oversight of technical security controls
, Experience setting up, running and/or managing SOC services, including third-party SOC providers
, Strong cyber incident management experience, including coordinating technical response and remediation
, Extensive knowledge of security standards and frameworks including ISO 27001 and NIST
, Experience assessing an organisation against security standards, identifying gaps and delivering remediation plans
, Extensive experience with GDPR, data protection and relevant security legislation/regulatory frameworks
, Knowledge of security assessment methodologies including threat modelling, controls assessments and risk assessments
, Experience across vulnerability management, penetration testing, threat intelligence, incident playbooks and patch management
, Solid understanding of IT infrastructure fundamentals including networks, operating systems, databases, Azure and Microsoft 365
, Experience with Rapid7, Sophos MTR, SolarWinds and ServiceNow would be highly advantageous
, Exposure to PCI DSS and NIS would also be beneficial
, Excellent stakeholder management and reporting skills
, Relevant security qualifications such as CISSP, CRISC, CISM or Security+ are highly desirable
The successful candidate will need to be comfortable working across both the strategic and operational sides of information security, with the ability to engage senior stakeholders while maintaining sufficient technical depth to oversee security controls, incidents and third-party security services. ....Read more...
Type: Contract Location: London, England
Duration: 3 months
Salary / Rate: £600 - £650 per day + inside IR35
Posted: 2026-10-15 16:43:07
-
A leading global technology company in the energy sector is seeking a Mechanical Assembly Test Engineer to join its on-site operations team in Cumbria.
In this role, you will be responsible for performing a range of technical and mechanical tasks to support production, assembly, and testing processes.
You will contribute to maintaining high quality standards and continuous improvement across manufacturing operations.
Responsibilities
Perform technical duties across mechanical, electronic, and system-based projects.
Conduct testing, measurements, and process controls on key production lines.
Read and interpret engineering drawings and job documentation ( work orders, bills of materials).
Troubleshoot and repair product or process issues.
Maintain tools, machinery, and equipment to ensure operational efficiency.
Support continuous improvement using modern manufacturing principles.
Skills
Hands on experience in mechanical assembly, testing, or manufacturing environments.
Ability to read blueprints and perform precision tasks such as wire preparation, crimping, and harness termination.
Familiarity with hydraulic, electronic, and mechanical systems.
Strong problem-solving and diagnostic skills. ....Read more...
Type: Contract Location: Barrow-in-Furness, England
Start: ASAP
Duration: Temp to Perm
Salary / Rate: £18 - £22 Per Annum None
Posted: 2026-10-15 11:26:29
-
Mechanical Technician required to produce and assemble components including conduct tests, measurements, operations and process controls as part of a marine assembly systems manufacturing team.
The ideal candidate will have precision engineering maritime or aerospace production experience reading blueprints to identify components, perform production assembly, test and repair.
Requirements
Manufacturing experience in comparable high value low volume environment, ideally maritime, subsea or aerospace.
Mechanical production using hand tools, automated machines and assemblies.
Quality processes understanding, assembly, test, troubleshoot, repair, test.
Other relevant skills include:
Wire preparation, strip, crimp and termination.
Manufacturing Systems tools maintenance and harness repair.
Hydraulic machine operation and programming.
Continuous improvement.
Responsibilities
Mechanical assembly of precision engineers high value projects.
Prosecute test techniques as per cell procedure.
Work from bill of materials, job packets, routings, work orders, wire lists and quality procedures.
Evaluate, repair and maintain production tooling and equipment. ....Read more...
Type: Contract Location: Barrow-in-Furness, England
Start: ASAP
Duration: Temp-to-Perm
Salary / Rate: £17 - £19 Per Annum None
Posted: 2026-10-15 11:25:26
-
A leading global technology company in the energy sector is seeking a Mechanical Assembly Test Engineer to join its on site operations team in Cumbria.
In this role, you will be responsible for performing a range of technical and mechanical tasks to support production, assembly, and testing processes.
You will contribute to maintaining high-quality standards and continuous improvement across manufacturing operations.
Responsibilities
Perform technical duties across mechanical, electronic, and system-based projects.
Conduct testing, measurements, and process controls on key production lines.
Read and interpret engineering drawings and job documentation ( work orders, bills of materials).
Troubleshoot and repair product or process issues.
Maintain tools, machinery, and equipment to ensure operational efficiency.
Support continuous improvement using modern manufacturing principles.
Skills
Hands on experience in mechanical assembly, testing, or manufacturing environments.
Ability to read blueprints and perform precision tasks such as wire preparation, crimping, and harness termination.
Familiarity with hydraulic, electronic, and mechanical systems.
Strong problem-solving and diagnostic skills. ....Read more...
Type: Contract Location: Barrow-in-Furness, England
Start: ASAP
Duration: Temp-to-Perm
Salary / Rate: £16 - £22 Per Annum None
Posted: 2026-10-15 11:25:14
-
Mechanical Technician required to produce and assemble components including conduct tests, measurements, operations and process controls as part of a marine assembly systems manufacturing team.
The ideal candidate will have precision engineering maritime or aerospace production experience reading blueprints to identify components, perform production assembly, test and repair.
Requirements
Manufacturing experience in comparable high value low volume environment, ideally maritime, subsea or aerospace.
Mechanical production using hand tools, automated machines and assemblies.
Quality processes understanding, assembly, test, troubleshoot, repair, test.
Other relevant skills include
Wire preparation, strip, crimp and termination.
Manufacturing Systems tools maintenance and harness repair.
Hydraulic machine operation and programming.
Continuous improvement.
Responsibilities
Mechanical assembly of precision engineers high value projects.
Prosecute test techniques as per cell procedure.
Work from bill of materials, job packets, routings, work orders, wire lists and quality procedures.
Evaluate, repair and maintain production tooling and equipment. ....Read more...
Type: Permanent Location: Barrow-in-Furness, England
Start: ASAP
Duration: Temp-to-Perm
Salary / Rate: £27000 - £40000 Per Annum None
Posted: 2026-10-15 11:24:07
-
Mechanical Assembly Test Technician required to perform technical and mechanical quality control tasks to support production, assembly, and testing processes.
You will contribute to maintaining high quality standards and continuous improvement across manufacturing operations.
Requirements
Quality Control.
Hands on experience in mechanical assembly, testing, or manufacturing environments.
Familiarity with hydraulic, electronic, and mechanical systems.
Responsibilities
Perform technical duties across mechanical, electronic, and system-based projects.
Conduct testing, measurements, and process controls on key production lines.
Read and interpret engineering drawings and job documentation ( work orders, bills of materials).
Troubleshoot and repair product or process issues.
Maintain tools, machinery, and equipment to ensure operational efficiency.
Support continuous improvement using modern manufacturing principles. ....Read more...
Type: Contract Location: Barrow-in-Furness, England
Start: ASAP
Duration: Temp-to-Perm
Salary / Rate: £14 - £19 Per Annum None
Posted: 2026-10-15 11:18:30
-
Mechanical Assembly Test Technician required to perform technical and mechanical quality control tasks to support production, assembly, and testing processes.
You will contribute to maintaining high quality standards and continuous improvement across manufacturing operations.
Requirements
Quality Control.
Hands on experience in mechanical assembly, testing, or manufacturing environments.
Familiarity with hydraulic, electronic, and mechanical systems.
Responsibilities
Perform technical duties across mechanical, electronic, and system-based projects.
Conduct testing, measurements, and process controls on key production lines.
Read and interpret engineering drawings and job documentation ( work orders, bills of materials).
Troubleshoot and repair product or process issues.
Maintain tools, machinery, and equipment to ensure operational efficiency.
Support continuous improvement using modern manufacturing principles. ....Read more...
Type: Permanent Location: Barrow-in-Furness, England
Start: ASAP
Duration: Temp-to-Perm
Salary / Rate: £28000 - £32000 Per Annum None
Posted: 2026-10-15 11:18:27
-
A leading global technology company in the energy sector is seeking a Mechanical Assembly Test Engineer to join its on site operations team in Cumbria.
In this role, you will be responsible for performing a range of technical and mechanical tasks to support production, assembly, and testing processes.
You will contribute to maintaining high quality standards and continuous improvement across manufacturing operations.
Responsibilities
Perform technical duties across mechanical, electronic, and system-based projects.
Conduct testing, measurements, and process controls on key production lines.
Read and interpret engineering drawings and job documentation ( work orders, bills of materials).
Troubleshoot and repair product or process issues.
Maintain tools, machinery, and equipment to ensure operational efficiency.
Support continuous improvement using modern manufacturing principles.
Skills
Hands on experience in mechanical assembly, testing, or manufacturing environments.
Ability to read blueprints and perform precision tasks such as wire preparation, crimping, and harness termination.
Familiarity with hydraulic, electronic, and mechanical systems.
Strong problem-solving and diagnostic skills. ....Read more...
Type: Contract Location: Barrow-in-Furness, England
Start: ASAP
Duration: Temp-to-Perm
Salary / Rate: £16 - £18 Per Annum None
Posted: 2026-10-15 11:15:08
-
A leading global technology company in the energy sector is seeking a Mechanical Assembly Test Engineer to join its on-site operations team in Cumbria.
In this role, you will be responsible for performing a range of technical and mechanical tasks to support production, assembly, and testing processes.
You will contribute to maintaining high-quality standards and continuous improvement across manufacturing operations.
Key Responsibilities
Perform technical duties across mechanical, electronic, and system-based projects.
Conduct testing, measurements, and process controls on key production lines.
Read and interpret engineering drawings and job documentation ( work orders, bills of materials).
Troubleshoot and repair product or process issues.
Maintain tools, machinery, and equipment to ensure operational efficiency.
Support continuous improvement using modern manufacturing principles.
Key Skills
Hands on experience in mechanical assembly, testing, or manufacturing environments.
Ability to read blueprints and perform precision tasks such as wire preparation, crimping, and harness termination.
Familiarity with hydraulic, electronic, and mechanical systems.
Strong problem-solving and diagnostic skills. ....Read more...
Type: Contract Location: Barrow-in-Furness, England
Start: ASAP
Duration: Temp-to-Perm
Salary / Rate: £18 - £20 Per Annum None
Posted: 2026-10-15 11:14:02
-
Job Description:
Our client is looking to appoint a Security Engineer to build, integrate and maintain the security capabilities that protect its systems, data and people.
You will work closely with Infrastructure, Cloud, Development, DevOps and other security teams to embed security earlier in the technology lifecycle and reduce reliance on manual security processes.
This is a hands-on role, engineering and improving security capabilities across cloud, identity, endpoint and vulnerability management.
You will develop integrations, tooling and automation that improve security outcomes while simplifying how security is used by other teams.
Skills/Experience:
Practical experience within Cybersecurity, Infrastructure, Cloud Engineering, Identity & Access Management, DevOps or a closely related technical discipline.
Strong knowledge and practical engineering experience across several of the areas below, with solid technical foundations and the ability to learn across different security domains.
Security engineering and architecture principles, vulnerability management, security testing and control validation.
Cloud security, with a good understanding of Windows and/or Linux environments and enterprise networking.
Identity and access management, privileged access and secrets management.
Security platforms, including endpoint security, SIEM, SOAR and other security technologies.
Automation and integration skills, including scripting or development using PowerShell, Python, Bash or similar, API-based integrations and Infrastructure as Code.
CI/CD pipelines, version control and integrating security controls and testing into development workflows.
Understanding of AI technologies, emerging security risks and appropriate guardrails.
A practical and curious engineer who enjoys solving technical problems and building security solutions that help others work securely.
Comfortable learning and applying your experience to unfamiliar technologies and problems.
A pragmatic approach to security, able to identify the risks that matter and turn them into practical solutions.
Clear communication and good technical judgement, with the confidence to challenge existing approaches.
Strong team working, systems thinking, data literacy and an improvement mindset.
Core Responsibilities:
Design, build, configure and maintain security platforms and protective controls across the technology environment.
Develop security tooling, integrations and automation, turning repetitive or manual processes into scalable capabilities where appropriate.
Support and improve identity security, privileged access and secrets management capabilities.
Support the secure adoption of AI by understanding emerging risks and contributing to practical guardrails.
Work closely with technology teams to embed security earlier in project and development lifecycles.
Support and improve cloud security and the integration of security testing and controls into CI/CD and development workflows.
Contribute to security architecture, technical design reviews and threat modelling, providing practical guidance on risk.
Develop and maintain security integrations and data flows that support security operations and incident response, providing specialist engineering support during incidents where required.
Test and continuously validate security controls, using the results to improve preventative and detective controls.
Produce and maintain clear technical documentation for security platforms, integrations and solutions.
Continually develop your expertise across security engineering, cloud, identity, application security and other emerging technologies, sharing knowledge with the wider team.
Core-Asset Consulting is an equal opportunities recruiter and we welcome applications from everyone irrespective of age, disability, gender, gender identity or expression, race, colour, ethnic or national origin, sexual orientation, religion or belief, marital/civil partner status or pregnancy.
To apply for this vacancy applicants must be eligible to work in the UK in accordance with the Immigration, Asylum and Nationality Act 2006.
At Core-Asset, we're committed to protecting and respecting your privacy.
Our privacy statement explains when and why we collect personal information about people who engage with our services, how we use it, the conditions under which we may disclose it to others, and how we keep it secure.
We may change this policy from time to time, so please check this policy occasionally to ensure that you're happy with any changes.
By engaging with us (either by applying for a job we're advertising, registering through our website, or getting in touch with our business) you're agreeing to be bound by this policy.
Core-Asset Consulting is committed to protecting the privacy of our candidates, clients and website users.
For further information, please refer to our full Privacy Statement available on our website http://www.core-asset.co.uk/about-core-asset/privacy-statement
Core-Asset Consulting offers specialist recruitment services to asset management, accounting & finance, asset servicing, legal and the wider financial services sector in Scotland. ....Read more...
Type: Permanent Location: Edinburgh, Scotland
Start: ASAP
Posted: 2026-10-15 10:35:58
-
Are you a qualified Gas Engineer with both commercial and domestic experience? This could be a great opportunity for you!
An opportunity has arisen for a Gas Engineer to join a heating and HVAC company based in Hertfordshire, providing services to domestic and commercial customers.
Location: the ideal candidates will be based in West/North-West London, Hertfordshire, or surrounding areas.
Engineers travel directly from home to customer sites, with no Central London work required.
The successful candidate will be responsible for servicing, repairing and installing domestic and commercial gas systems, identifying faults and carrying out relevant maintenance work.
This is a full-time, permanent position offering a basic salary of £50,000-£55,000, negotiable for the right candidate, plus benefits.
Key Responsibilities
* Service, maintain and repair domestic and commercial gas heating systems.
* Install and commission domestic and commercial boilers.
* Diagnose faults and carry out repairs on heating systems and associated controls.
* Undertake planned maintenance, breakdown work and remedial repairs, including on commercial plant room equipment.
* Carry out gas safety checks, testing and certification, and document any identified issues.
* Perform other duties as required.
The candidates from the following background will be considered:
* Commercial & Domestic Gas Engineer, Heating Engineer, Gas Service Engineer, Gas Installation Engineer, Boiler Engineer, Boiler Engineer, Gas Maintenance Engineer, Mobile Gas Engineer, Gas Repair Engineer, Commercial Gas Service Engineer, Heating Systems Engineer, Gas Engineer
Essential Requirements
* Relevant qualifications in both domestic and commercial gas.
* Proven experience servicing, repairing and installing commercial gas boilers.
* Experience working with domestic gas systems, including servicing, repairs and installations.
* Strong fault-finding and diagnostic skills across heating systems.
* Ideally, experience working in commercial plant rooms.
* A full UK driving licence.
Whats on Offer
* Salary of £50,000-£55,000, negotiable.
* Company van and fuel card.
* Company tools and equipment.
* Overtime opportunities.
* Christmas bonus.
* Company pension.
* Paid annual leave plus bank holidays.
* Sick pay.
* Gym membership and employee discounts.
* Company events.
* Free on-site parking.
* Manufacturer training and professional development.
* Full-time PAYE employment.
This is an opportunity for a suitably qualified Gas Engineer to work across domestic and commercial environments, applying their skills in installation, servicing, repairs and fault-finding.
Important Information: We endeavour to process your personal data in a fair and transparent manner.
In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone, or text message.
For more information see our Privacy Policy on our website.
It is important you are aware of your individual rights and the provisions the company has put in place to protect your data.
If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Type: Permanent Location: Watford,Harrow,West london, North West London,Home counties, England
Start:
Duration:
Salary / Rate: £50000 - £55000 Per Annum
Posted: 2026-10-14 17:16:26
-
Are you a qualified Gas Engineer with both commercial and domestic experience? This could be a great opportunity for you!
An opportunity has arisen for a Gas Engineer to join a heating and HVAC company based in Hertfordshire, providing services to domestic and commercial customers.
Location: the ideal candidates will be based in West/North-West London, Hertfordshire, or surrounding areas.
Engineers travel directly from home to customer sites, with no Central London work required.
The successful candidate will be responsible for servicing, repairing and installing domestic and commercial gas systems, identifying faults and carrying out relevant maintenance work.
This is a full-time, permanent position offering a basic salary of £50,000-£55,000, negotiable for the right candidate, plus benefits.
Key Responsibilities
* Service, maintain and repair domestic and commercial gas heating systems.
* Install and commission domestic and commercial boilers.
* Diagnose faults and carry out repairs on heating systems and associated controls.
* Undertake planned maintenance, breakdown work and remedial repairs, including on commercial plant room equipment.
* Carry out gas safety checks, testing and certification, and document any identified issues.
* Perform other duties as required.
The candidates from the following background will be considered:
* Commercial & Domestic Gas Engineer, Heating Engineer, Gas Service Engineer, Gas Installation Engineer, Boiler Engineer, Boiler Engineer, Gas Maintenance Engineer, Mobile Gas Engineer, Gas Repair Engineer, Commercial Gas Service Engineer, Heating Systems Engineer, Gas Engineer
Essential Requirements
* Relevant qualifications in both domestic and commercial gas.
* Proven experience servicing, repairing and installing commercial gas boilers.
* Experience working with domestic gas systems, including servicing, repairs and installations.
* Strong fault-finding and diagnostic skills across heating systems.
* Ideally, experience working in commercial plant rooms.
* A full UK driving licence.
Whats on Offer
* Salary of £50,000-£55,000, negotiable.
* Company van and fuel card.
* Company tools and equipment.
* Overtime opportunities.
* Christmas bonus.
* Company pension.
* Paid annual leave plus bank holidays.
* Sick pay.
* Gym membership and employee discounts.
* Company events.
* Free on-site parking.
* Manufacturer training and professional development.
* Full-time PAYE employment.
This is an opportunity for a suitably qualified Gas Engineer to work across domestic and commercial environments, applying their skills in installation, servicing, repairs and fault-finding.
Important Information: We endeavour to process your personal data in a fair and transparent manner.
In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone, or text message.
For more information see our Privacy Policy on our website.
It is important you are aware of your individual rights and the provisions the company has put in place to protect your data.
If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Type: Permanent Location: Harrow, West london, North West London, Watford, Home counties, England
Start:
Duration:
Salary / Rate: £50000 - £55000 Per Annum
Posted: 2026-10-14 17:04:18
-
Are you a Qualified F-Gas Category 1 Engineer with both commercial and domestic experience? This could be a great opportunity for you!
An opportunity has arisen for an Air Conditioning Engineer to join a family-run heating, cooling and HVAC company, providing installation, servicing and repair services for domestic and commercial properties.
Location: the ideal candidates will be based in West/North-West London, Hertfordshire, or surrounding areas.
Engineers travel directly from home to customer sites, with no Central London work required.
This full-time, permanent PAYE position offers a basic salary of £50,000-£55,000, negotiable for the right candidate, plus benefits.
Candidates with strong commercial and domestic air conditioning experience will be considered, even if they have limited experience with chillers, ventilation or electrical installations
Key Responsibilities
* Install domestic and commercial split, multi-split and VRF/VRV air conditioning systems.
* Service and maintain air conditioning and refrigeration equipment across residential and commercial sites.
* Diagnose faults and carry out repairs on air conditioning and associated systems.
* Undertake planned maintenance and respond to breakdowns, including work on commercial chillers and ventilation equipment where required.
* Carry out refrigerant checks, testing and commissioning, along with electrical tasks where appropriately qualified and competent.
* Complete service reports, maintain safe working practices
* Perform other duties as required.
The candidates from the following background will be considered:
* Air Conditioning Engineer, HVAC Engineer, HVAC & Refrigeration Engineer, Air Conditioning and Refrigeration Engineer, Refrigeration and Air Conditioning Engineer, Air Conditioning Service Engineer, Air Conditioning Installation Engineer, AC Engineer
What We Are Looking For
* F-Gas Category 1 qualification.
* Proven experience with both domestic and commercial air conditioning systems.
* Experience installing, servicing and repairing air conditioning equipment.
* Strong diagnostic and fault-finding skills.
* A good understanding of refrigeration principles and electrical controls.
* Ability to manage workloads and work independently.
* Full UK driving licence.
Whats on offer
* Competitive salary.
* Overtime opportunities.
* Company van, fuel card, tools and equipment.
* Company pension.
* Paid annual leave plus bank holidays.
* Christmas bonus.
* Employee discounts and benefits portal.
* Employee mentoring programme
* Financial planning services
* Free or subsidised travel
* Gym membership
* Health & wellbeing programme
* Referral programme
* Sick pay
* Store discount
* Manufacturer training and ongoing professional development.
* Full-time PAYE employment.
This is an excellent opportunity for an HVAC & Refrigeration Engineer to broaden their experience across domestic and commercial systems while developing their technical skills and career.
Important Information: We endeavour to process your personal data in a fair and transparent manner.
In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone, or text message.
For more information see our Privacy Policy on our website.
It is important you are aware of your individual rights and the provisions the company has put in place to protect your data.
If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Type: Permanent Location: Watford,Harrow, West london, North West London, Home counties, England
Start:
Duration:
Salary / Rate: £50000 - £55000 Per Annum
Posted: 2026-10-14 16:59:11
-
Are you a Qualified F-Gas Category 1 Engineer with both commercial and domestic experience? This could be a great opportunity for you!
An opportunity has arisen for an Air Conditioning Engineer to join a family-run heating, cooling and HVAC company, providing installation, servicing and repair services for domestic and commercial properties.
Location: the ideal candidates will be based in West/North-West London, Hertfordshire, or surrounding areas.
Engineers travel directly from home to customer sites, with no Central London work required.
This full-time, permanent PAYE position offers a basic salary of £50,000-£55,000, negotiable for the right candidate, plus benefits.
Candidates with strong commercial and domestic air conditioning experience will be considered, even if they have limited experience with chillers, ventilation or electrical installations
Key Responsibilities
* Install domestic and commercial split, multi-split and VRF/VRV air conditioning systems.
* Service and maintain air conditioning and refrigeration equipment across residential and commercial sites.
* Diagnose faults and carry out repairs on air conditioning and associated systems.
* Undertake planned maintenance and respond to breakdowns, including work on commercial chillers and ventilation equipment where required.
* Carry out refrigerant checks, testing and commissioning, along with electrical tasks where appropriately qualified and competent.
* Complete service reports, maintain safe working practices
* Perform other duties as required.
The candidates from the following background will be considered:
* Air Conditioning Engineer, HVAC Engineer, HVAC & Refrigeration Engineer, Air Conditioning and Refrigeration Engineer, Refrigeration and Air Conditioning Engineer, Air Conditioning Service Engineer, Air Conditioning Installation Engineer, AC Engineer
What We Are Looking For
* F-Gas Category 1 qualification.
* Proven experience with both domestic and commercial air conditioning systems.
* Experience installing, servicing and repairing air conditioning equipment.
* Strong diagnostic and fault-finding skills.
* A good understanding of refrigeration principles and electrical controls.
* Ability to manage workloads and work independently.
* Full UK driving licence.
Whats on offer
* Competitive salary.
* Overtime opportunities.
* Company van, fuel card, tools and equipment.
* Company pension.
* Paid annual leave plus bank holidays.
* Christmas bonus.
* Employee discounts and benefits portal.
* Employee mentoring programme
* Financial planning services
* Free or subsidised travel
* Gym membership
* Health & wellbeing programme
* Referral programme
* Sick pay
* Store discount
* Manufacturer training and ongoing professional development.
* Full-time PAYE employment.
This is an excellent opportunity for an HVAC & Refrigeration Engineer to broaden their experience across domestic and commercial systems while developing their technical skills and career.
Important Information: We endeavour to process your personal data in a fair and transparent manner.
In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone, or text message.
For more information see our Privacy Policy on our website.
It is important you are aware of your individual rights and the provisions the company has put in place to protect your data.
If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Type: Permanent Location: Harrow, West london, North West London, Watford, Home counties, England
Start:
Duration:
Salary / Rate: £50000 - £55000 Per Annum
Posted: 2026-10-14 16:46:01
-
Electrical Maintenance Engineer - Food Manufacturing - £63,000 + 15% Pension
£63,000 | 4 on 4 off (Days & Nights) | 15% Pension |
Salary: £63,000 (including shift allowance)
Shift Pattern: 4 on 4 off Days & Nights
Benefits: , 15% Pension Contribution , Life Assurance , Ongoing Training & Development , Career Progression Opportunities , Employee Benefits Package , Free On-Site Parking , Long-Term Job Security
The Opportunity
An exciting opportunity has arisen for an Electrical Maintenance Engineer to join a market-leading food manufacturing business operating a highly automated production facility in East London.
This is a fantastic opportunity to join a well-invested manufacturing site producing household-name products, with continued investment in automation, engineering excellence and operational performance.
Working within a skilled engineering team, you'll play a key role in maintaining and improving production equipment, ensuring maximum reliability and minimal downtime across a fast-paced FMCG environment.
The Role
As an Electrical Maintenance Engineer, you'll be responsible for maintaining a variety of high-speed automated manufacturing and packaging equipment, ensuring the site continues to operate safely and efficiently.
Key responsibilities include: , Carrying out planned preventative and reactive electrical maintenance , Diagnosing and repairing faults on PLC-controlled production equipment , Working on motors, drives, inverters, sensors, contactors and control systems , Maintaining high-speed production, processing and packaging machinery , Supporting mechanical maintenance activities where required , Responding quickly to breakdowns and minimising production downtime , Conducting root cause analysis and implementing permanent corrective actions , Supporting continuous improvement, reliability and efficiency projects , Working towards site KPIs including OEE, reliability and performance targets , Ensuring all work is completed in accordance with health and safety standards
What We're Looking For , Apprentice trained, NVQ Level 3, HNC or equivalent engineering qualification , Strong electrical fault-finding and diagnostic skills , Experience working with PLC-controlled equipment and automated machinery , Knowledge of drives, motors, sensors, relays, contactors and industrial controls , Previous experience within food manufacturing, FMCG, packaging, pharmaceutical or other high-speed manufacturing environments , A proactive approach to problem-solving and continuous improvement , Ability to work effectively within a rotating days and nights shift pattern
Why Apply? , £63,000 salary package , Industry-leading 15% pension contribution , 4 on 4 off days and nights shift pattern , Highly automated manufacturing environment , Ongoing investment in plant, equipment and technology , Secure, stable and growing manufacturing business , Genuine training, development and progression opportunities , Supportive engineering culture with a focus on continuous improvement
Apply Now
If you're an Electrical Maintenance Engineer looking to join a well-invested manufacturing business offering excellent earning potential, outstanding benefits and long-term career progression, please apply ....Read more...
Type: Permanent Location: Waltham Forest, England
Start: ASAP
Salary / Rate: £62000 - £63000 per annum
Posted: 2026-10-14 15:59:49
-
This is a fantastic opportunity to join an industry leading manufacturer in the area of Tamworth.Our client is now seeking to appoint a PLC Controls Engineer on a Monday to Friday Days only basis.
This role requires someone who has very strong knowledge and experience of electrical/automation and PLC systems to join the team.
Basic salary of £55,000 per annum, plus fantastic bonus as well as premium OT opportunities taking OTE to over £70K, plus pension matched up to 10%Our client is an industry-leading manufacturing business with a multi-million-pound turnover and impressive growth plans, supported with large-scale investment and an existing established network of manufacturing facilities across the UK.The working culture is friendly, and one that encourages the sharing of best practices, whilst providing a platform for continuous learning and development.What's In It for You as Controls and Automation Engineer
Base Salary of £55,000 per annum, Plus bonus and OT Opportunities
Pension matched up to 10%
Monday to Friday - Days Only
Extensive training and personal development are available, including accredited training and career development plans for those who want it.
Position Overview of Controls and Automation EngineerThe role will be working as part of the Maintenance Team providing ‘Hands-on' Electrical & Controls Technical support to both Production and other internal functions throughout the Factory.
PLC fault finding and modifications are vital skills to have for the role.
You will be solely working with electrical installations, fault finding, and repair of PLC controlled machinery, within a manufacturing environment.Experience with breakdowns, fault finding, and changing of PLC parameters and working with Controls and Automation. Experience of installing servo drives and projects, capex improvements, HMI, and profibus is all required.
Siemens S7 training is available.Within the position as Controls and Automation Engineer, you will have the opportunity to be involved with a wide of range of electrical maintenance operations and projects, which will be supported with a wide range of training opportunities, including accredited training programs.Experience and Qualification Required
Recognised Electrical Engineering Apprenticeship & Qualification or equivalent UK level 3 qualification - NVQ, City and Guilds AND BTEC 3 or HNC/HND in Electrical Engineering etc
PLC Fault finding experience and experience with breakdowns, fault finding, and changing of PLC parameters specifically.
The ability to work within a fast-paced manufacturing environment undertaking PPM and TPM activities
High degree of Health & Safety awareness.
Ability to fault find, repair and provide solutions to electrical machinery problems
This is a fantastic opportunity to join an industry leading business with huge opportunity for further training and career development.
Please apply now or contact us for more information on 01484 645269 ....Read more...
Type: Permanent Location: Tamworth, England
Start: ASAP
Salary / Rate: Up to £55000 per annum + Bonus + Premium OT, Leading Benefits
Posted: 2026-10-13 11:47:21
-
This PLC Controls Engineer position is days based Monday-Friday, company car, £55,000 plus 18% bonus, and offers training and career development with an international market leader in their field.
Within the position you will be provided with the opportunity to utilise your engineering experience and knowledge to identify and improve machinery, equipment and manufacturing lines.
What's in it for you as PLC Controls Engineer
£55,000 basic salary plus 18% Bonus
Pension match up to 10%
Location - Hinckley/Coalville area
Company Car + fuel card
Days based position Monday to Friday
Extensive training and career development programmes
The opportunity to work with a team of highly skilled technicians across maintenance and project engineering activities
Key Responsibilities of PLC Controls Engineer
Travel across the region to provide support to each of the group's manufacturing sites.
Provide ‘hands-on' technical support and expertise and drive Plant Operational Improvement as part of the Group Engineering function.
Support the development of the Reliability Centred Maintenance Strategy by supporting criticality assessments and drive towards condition-based monitoring
Enhance plant reliability by applying modern maintenance strategies and continuous improvement techniques.
Support new and innovative process automation initiatives.
I would love to speak to anyone who has any of the following of a PLC Controls Engineer;
Previous experience as Maintenance Engineer from either an electrical or mechanical background
Automation, Programming, PLC Controls
A Electrical Apprenticeship, NVQ Level 3 Engineering or City & Guilds Level 3, BTEC Level 3 in Engineering or equivalent Naric / Enic Conversion
Ability to trouble shoot & repair manufacturing plant equipment & machinery
Previous experience within Mechanical or Electrical Maintenance within industrial manufacturing plant environments
....Read more...
Type: Permanent Location: Nuneaton, England
Start: ASAP
Salary / Rate: £55000.00 - £60000.00 per annum + Car + Pension + Bonus
Posted: 2026-10-13 11:44:04
-
Industrial Electrical & Controls Engineer
Location: UK - Site-Based / Field-BasedSalary: Competitive, dependent on experienceJob Type: Permanent, Full-Time
Industrial Electrical Engineering | PLCs | Automation | Heavy Industry
Are you an experienced Industrial Electrical Engineer, Controls Engineer or EC&I Engineer who enjoys solving complex electrical and automation problems?
We're recruiting for an established engineering business supporting industrial plants, manufacturing facilities and heavy process environments across the UK.
This opportunity would suit a hands-on engineer with strong industrial electrical experience who is comfortable working with PLC-controlled machinery, motor control systems, variable speed drives and industrial automation equipment.
Whether your background is in electrical maintenance, industrial installations, commissioning or controls engineering, we're interested in engineers who can diagnose faults, understand how machinery operates and deliver practical solutions.
The Role
As an Industrial Electrical & Controls Engineer, you'll work across a variety of industrial sites, supporting electrical installations, fault diagnosis, control-system improvements and commissioning activities.
Your responsibilities may include:
Diagnose and resolve electrical and control-system faults across industrial machinery and production equipment.
Work with PLC-controlled systems, identifying faults within automated processes and associated electrical equipment.
Support the installation, modification and commissioning of industrial electrical and control systems.
Fault-find on motor control centres, electrical panels, three-phase motors and variable speed drives.
Investigate issues involving sensors, instrumentation, safety circuits and control equipment.
Assist with PLC, HMI and SCADA troubleshooting, configuration and system improvements.
Support machinery upgrades, automation improvements and the replacement of obsolete equipment.
Work alongside engineers, contractors and site teams to minimise downtime and improve plant reliability.
Read and interpret electrical drawings, wiring diagrams and control-system documentation.
What We're Looking For
We're particularly interested in candidates with:
Experience working with three-phase motors, VSDs, control panels, MCCs and industrial electrical systems.
Practical experience fault-finding on PLC-controlled machinery.
An understanding of industrial automation, control circuits, sensors and instrumentation.
The ability to diagnose electrical faults systematically and work independently on industrial sites.
A full UK driving licence and willingness to travel to customer sites.
Controls & Automation Experience
Experience in any of the following would be particularly valuable:
Siemens, Allen-Bradley/Rockwell, Schneider or Mitsubishi PLC systems.
PLC fault-finding, software modifications or programming.
HMI and SCADA systems.
Industrial instrumentation and process control.
Variable speed drives, motor control and automated machinery.
Control panel design, wiring or modifications.
You don't need to be an expert PLC programmer to be considered. Engineers with strong industrial electrical experience and practical PLC fault-finding capability are encouraged to apply.
Equally, experienced Controls or Automation Engineers looking for a varied, hands-on industrial engineering role would be very well suited.
Relevant Industry Backgrounds
We would welcome applications from engineers working within:
Aggregates, quarrying and mineral processing | Asphalt, concrete, cement and building materials | Heavy manufacturing and industrial production Steel, metals and fabrication | Water treatment and utilities | Food and beverage manufacturing | Recycling and waste processing | Automated production and materials handling
Experience within heavy industrial or continuous-process environments would be particularly advantageous.
Qualifications
Relevant qualifications could include:
NVQ Level 3 in Electrical Installation or Electrical Engineering
Electrical or Electronic Engineering HNC/HND
Recognised electrical apprenticeship
18th Edition Wiring Regulations
Additional industrial safety training, such as IPAF, PASMA or site safety passports, would be advantageous.
What's on Offer?
Competitive salary dependent on experience
Opportunities to develop further technical and controls expertise
Long-term career development within an established engineering business
Interested?
If you're an Industrial Electrician, Electrical Engineer, Controls Engineer, Automation Engineer or EC&I Engineer with experience working on industrial machinery, we'd be keen to hear from you.
Apply today for a confidential discussion.
....Read more...
Type: Permanent Location: Sevenoaks, England
Salary / Rate: £45000 - £54000 per annum + + van + bonus
Posted: 2026-10-12 09:39:31
-
Senior IT Security Architect - Financial Services - Lugano / Hybrid
(Key skills: IT Security Architecture, Cybersecurity, Security Frameworks, Cloud Security, Network & System Security, Identity & Access Management, Secure Design, Threat Modelling, Security Standards (ISO 27001, NIST), Risk Management, Architecture Governance, Stakeholder Advisory)
Are you an experienced security architect with a passion for designing robust, scalable and compliant security solutions in complex environments? Do you want to work at the forefront of protecting critical financial services platforms and customer data? If so, we have an exciting opportunity for you to influence security strategy and shape secure architectures at scale.
Our client, a highly reputable financial services organisation, is seeking a Senior IT Security Architect to lead the design and implementation of enterprise-level security architectures across business-critical systems.
You will play a strategic role in shaping how secure digital services are delivered across the organisation, advising on security standards, controls and optimisations that protect both customers and internal operations.
As Senior IT Security Architect, you will partner with cross-functional teams including cloud engineering, software development, infrastructure, risk and compliance.
You will define secure architecture patterns for both on-premise and cloud services, review designs and implementations, and ensure alignment with regulatory and internal security requirements.
You'll be instrumental in developing threat models, conducting security risk assessments and embedding secure design principles into project lifecycles.
In this role, you will develop security reference architectures, recommend security controls, and guide technical teams on secure implementation practices.
You will be a trusted advisor to senior stakeholders, providing insight on emerging threats, vulnerability mitigations and compliance obligations.
You'll help maintain and enhance the organisation's security frameworks and contribute to continuous improvement of security governance and monitoring capabilities.
The ideal candidate will bring extensive experience in security architecture — particularly within financial services, banking or other regulated sectors — and a strong understanding of security frameworks such as ISO 27001, NIST, OWASP and CIS Controls.
You'll be comfortable working with cloud platforms (e.g., Azure, AWS), identity and access management solutions, encryption technologies and enterprise networking/security stacks.
Your ability to communicate complex security concepts to both technical and non-technical stakeholders will be key to your success.
This is a rare opportunity to own security architecture for an organisation where digital innovation, data protection and security best practices are integral to the business strategy.
You'll join a collaborative team that values experience, initiative and leadership — and you'll have significant influence over the future of secure technology delivery.
Location: Lugano, Switzerland / Hybrid working
Salary: CHF 100,000 - CHF 120,000 + Bonus + Pension + Benefits
Applicants must have the right to work in Switzerland.
NOIRSWITZERLANDREC
NOIREUROPEREC ....Read more...
Type: Permanent Location: Lugano, Switzerland
Start: ASAP
Salary / Rate: Swiss Franc100000 - Swiss Franc120000 per annum + + Bonus + Benefits + Pension
Posted: 2026-10-12 02:02:43
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
Want to learn more about who we are and what we do? Take a moment to explore our website and discover what sets us apart.
We encourage all applicants to check it out before applying! TCMC | Tremco CPG Inc.
GENERAL PURPOSE OF THE JOB:
The Maintenance Mechanic I provides technical expertise on all matters of maintenance excellence of all process control, electrical, & Instrumentation equipment.
Recommends needed improvements to operations, and maintenance leadership.
This position focuses on sustaining or returning to current performing standards and works with the maintenance manager to lead longer term improvement for electrical and instrumentation equipment and enhancing maintenance team competency in the areas of electrical, electrical diagnostics.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Ability to understand and perform complex repair procedures within Chemical Plant while following oral and written instruction specific to the equipment being repaired.
Work closely with the maintenance manager and plant engineers to enhance equipment reliability and develop equipment repair procedures.
work with current maintenance technicians to strengthen skills in the areas of electrical.
Work from ladders, scaffolds, catwalks, or high lifts
Develop a full understanding of chemical hazards specific to area assigned to, including knowledge of required PPE for each job.
Ability to read and interpret blueprints, layouts, drawings, and/or specifications.
Work in plant, and shop environment.
Support capital projects by participating and reviewing equipment selection and layout to optimize maintainability and meet reliability goals.
Promote consistency by inputting on standardizing equipment, providing technical expertise for installation, check out, maintenance procedures and start-up of all new or modified critical equipment.
Participate in PSM activities as defined by site manuals and practices.
Participate in continuing education and industry conferences to improve competencies and keep current and evaluate new technologies for their applicability
Develop a full understanding of material identification code system, including hazard identification numbering for repair jobs that require clearing of equipment in such service.
Develop a basic understanding of the function of plant auxiliary equipment, including the fire protection system, boiler, heaters, air compressor, waste handling and emission control devices.
This includes specific tests or preventive maintenance procedures required for all equipment.
Develop a basic understanding of bulk tank systems.
This includes a numbering system and location tank tables, level measuring systems and transfer pumps for repairing such systems.
Develop a full understanding of the plant waste handling systems.
This includes sumps operation, holding tanks, separation, and transfer equipment for repairing such systems.
Work with internal customers to provide support for small projects; troubleshoot problems using operational procedures and products to eliminate downtime.
Help to maintain records on equipment to build history to track equipment service and replacement requirements.
Adhere to all company quality, safety, security, health and environmental requirements and policies.
Work with outside contractor.
Perform all work according to Tremco quality and safety procedures.
Knowledge of calibrating different types of 4-20mA transmitters.
Knowledge of meters and calibration tools.
Knowledge of troubleshooting Motors and Motor Controls.
Knowledge of NEC.
EDUCATION REQUIREMENT: High school diploma or equivalent.
EXPERIENCE REQUIREMENT:
1 or more years of experience in manufacturing mechanical field or AS degree from technical school.
Experience in installation, maintenance and troubleshooting plant issues.
Good analytical skills and attention to detail with ability to read and interpret blueprints, plans and manuals.
Basic safety training such as Right to Know, Hazmat, Hazwoper.
OTHER SKILLS AND ABILITIES:
Ability to work onsite in; Corsicana, TX.
PHYSICAL DEMANDS:
Ability to lift and carry 50 pounds.
Ability to bend, squat down, and reach above your head, throughout the day.
Ability to climb stairs and ladders.
Ability to wear a respirator and work in confined spaces.
Ability to work from heights and wear fall protections.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Corsicana, Texas
Posted: 2026-10-11 23:12:48
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
Want to learn more about who we are and what we do? Take a moment to explore our website and discover what sets us apart.
We encourage all applicants to check it out before applying! TCMC | Tremco CPG Inc.
GENERAL PURPOSE OF THE JOB:
The Maintenance Mechanic I provides technical expertise on all matters of maintenance excellence of all process control, electrical, & Instrumentation equipment.
Recommends needed improvements to operations, and maintenance leadership.
This position focuses on sustaining or returning to current performing standards and works with the maintenance manager to lead longer term improvement for electrical and instrumentation equipment and enhancing maintenance team competency in the areas of electrical, electrical diagnostics.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Ability to understand and perform complex repair procedures within Chemical Plant while following oral and written instruction specific to the equipment being repaired.
Work closely with the maintenance manager and plant engineers to enhance equipment reliability and develop equipment repair procedures.
work with current maintenance technicians to strengthen skills in the areas of electrical.
Work from ladders, scaffolds, catwalks, or high lifts
Develop a full understanding of chemical hazards specific to area assigned to, including knowledge of required PPE for each job.
Ability to read and interpret blueprints, layouts, drawings, and/or specifications.
Work in plant, and shop environment.
Support capital projects by participating and reviewing equipment selection and layout to optimize maintainability and meet reliability goals.
Promote consistency by inputting on standardizing equipment, providing technical expertise for installation, check out, maintenance procedures and start-up of all new or modified critical equipment.
Participate in PSM activities as defined by site manuals and practices.
Participate in continuing education and industry conferences to improve competencies and keep current and evaluate new technologies for their applicability
Develop a full understanding of material identification code system, including hazard identification numbering for repair jobs that require clearing of equipment in such service.
Develop a basic understanding of the function of plant auxiliary equipment, including the fire protection system, boiler, heaters, air compressor, waste handling and emission control devices.
This includes specific tests or preventive maintenance procedures required for all equipment.
Develop a basic understanding of bulk tank systems.
This includes a numbering system and location tank tables, level measuring systems and transfer pumps for repairing such systems.
Develop a full understanding of the plant waste handling systems.
This includes sumps operation, holding tanks, separation, and transfer equipment for repairing such systems.
Work with internal customers to provide support for small projects; troubleshoot problems using operational procedures and products to eliminate downtime.
Help to maintain records on equipment to build history to track equipment service and replacement requirements.
Adhere to all company quality, safety, security, health and environmental requirements and policies.
Work with outside contractor.
Perform all work according to Tremco quality and safety procedures.
Knowledge of calibrating different types of 4-20mA transmitters.
Knowledge of meters and calibration tools.
Knowledge of troubleshooting Motors and Motor Controls.
Knowledge of NEC.
EDUCATION REQUIREMENT: High school diploma or equivalent.
EXPERIENCE REQUIREMENT:
1 or more years of experience in manufacturing mechanical field or AS degree from technical school.
Experience in installation, maintenance and troubleshooting plant issues.
Good analytical skills and attention to detail with ability to read and interpret blueprints, plans and manuals.
Basic safety training such as Right to Know, Hazmat, Hazwoper.
OTHER SKILLS AND ABILITIES:
Ability to work onsite in; Corsicana, TX.
PHYSICAL DEMANDS:
Ability to lift and carry 50 pounds.
Ability to bend, squat down, and reach above your head, throughout the day.
Ability to climb stairs and ladders.
Ability to wear a respirator and work in confined spaces.
Ability to work from heights and wear fall protections.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Corsicana, Texas
Posted: 2026-10-11 23:12:00
-
JOB DESCRIPTION
The Process Engineer is responsible for evaluating and improving processes within Stonhard manufacturing operations.
Additionally, the Process Engineer is responsible for implementation of continuous improvement initiatives, capital project support, production efficiency, maintenance process improvements, and equipment reliability.
Essential Functions
Lead root cause analysis for process failures.
Develop and maintain standard work instructions.
Develop and maintain Process Failure Mode Effect Analysis for areas of responsibility.
Improves production line efficiency to show a measurable increase in OEE.
Support maintenance in equipment troubleshooting.
Working knowledge of I/O, PLC, and 24V controls is preferred.
Programming a plus.
Experience with Manufacturing Execution Systems preferred.
Design and coordinate fabrication of manufacturing support components.
Support day-to-day production operations.
Re-engineer existing equipment to meet new optimization, reliability, safety, throughput, and process requirements.
Evaluate and make recommendations, which will increase output and decrease costs by addressing/improving workflow, ergonomics, time/motion characteristics, cycle-times, set-up times, waste, etc.
Confer with management and general staff to implement plans and recommendations.
Ensure CI project goals are met and sustained through the development of effective control plans.
Ensure Continuous Improvement processes and procedures are followed and adhered to through auditing and process confirmation practices.
Lead C.I.
initiatives in areas of 5S, Waste Reduction, Value-Stream Mapping, etc.
Ensure appropriate validations are completed as part of solution implementation.
Downtime Loss Analysis and Reduction - Start-up & Changeovers downtime improvement
Equipment failure (Structured failure analysis 5W's, Fishbone analysis)
Minimum Requirements
Bachelor's degree in engineering
Lean and/or Six Sigma preferred but not required.
Minimum 5 years of manufacturing experience preferably in a GMP environment.
Physical Requirements
While performing the duties of this position, the employee is regularly required to use hands to finger, handle, or feel and talk or hear.
The employee is frequently required to stand; walk and reach with hands and arms.
The employee is occasionally required to sit; stoop, kneel, crouch, or crawl.
The employee must regularly lift and /or move up to 10-25 pounds; frequently lift and/or move up to 50 pounds.
Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and ability to adjust focus.
Benefits and Compensation
The pay range for applicants in this position generally ranges between $65,000 and $75,000.
The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law.
In addition to career advancement and growth, continuous training, and mentoring opportunities, Stonhard offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Fort Wayne, Indiana
Posted: 2026-10-10 15:12:31
