-
High power electronics (> 100kW) design Engineer required to work on high value low volume product design.
This is a senior role that will take a lead role on all aspects of Power Electronics Design for the product.
Design teams are typically quite small (5 ??? 20 Engineers) and work on the full Product Development lifecycle from concept, design, development, manufacture and support.
This is a perfect opportunity for an Experienced high Power Electronics Design Engineer who would like to work in a scientific environment on new designs with cutting edge technologies with technical autonomy over their domain. ....Read more...
Type: Permanent Location: Leicester, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £70000 Per Annum None
Posted: 2025-12-10 09:44:00
-
My client is looking for a Power Electronics Engineer at Graduate, MSc, PhD or with some post grad experience in Switch Mode Power Supply design.
The ideal candidate will have worked on 280 Volt / 50 ??? 100 Watt designs.
The role will require a strong fundamental understanding of Power circuits down to component level and want to work on novel Power circuit design.
On-going training will be provided, this is a fantastic opportunity for any bright recent graduates with a passion for power and interest in making stuff. ....Read more...
Type: Permanent Location: Birmingham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £32000 - £50000 Per Annum None
Posted: 2025-12-10 09:42:58
-
My client is looking for Power Electronics Engineers to work on high voltage 3 phase Motor control techniques.
The ideal candidate will have experience of designing converters in the range of: 230 ??? 600 Volts / 5 ??? 50 Kilowatts but any comparable experience considered.
Multiple levels required up to Principal depending on experience level.
Type: Permanent Location: Birmingham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £45000 - £65000 Per Annum None
Posted: 2025-12-10 09:42:56
-
Embedded Software Engineer required to design and develop firmware and COTS device driver diagnostic software including system testing applications.
Target platforms are typically high speed, high performance boards driven by ARM CPU???s so an understanding of the underlying hardware and experience of programming down to registry level is highly beneficial.
This role will be primarily independent working on projects in parallel with some involvement in complex support issues and customer application integration.
You will have an Engineering degree and experience of
Embedded C programming for ARM microprocessors.
Programming hardware devices at register level.
Boot loader, PC BIOS development or Linux device drivers.
Please apply in the first instance with your CV and contact number for a confidential chat. ....Read more...
Type: Permanent Location: Reading, England
Start: ASAP
Duration: Permanent
Salary / Rate: £32000 - £48000 Per Annum None
Posted: 2025-12-10 09:41:53
-
Intel processor, (32 / 64 bit x86 families) Board Designer required to work on high specification single microcontroller boards.
The ideal candidate will have experience of designing boards that exploit: PCI, (compact & express) bus for high speed, high performance applications, schematic design, power supply, digital and analog interfacing with Embedded C / firmware.
The successful candidate will work on the full design life cycle from definition to production and support.
This is a senior hands on role but there are many opportunities to grow or recruit into a team lead or managerial position.
You will have Digital Hardware Design experience of:
32/64 bit microprocessors.
High performance bus architectures e.g.
PCI, Rapid IO
Gigabit Ethernet
DDR4, DRAM or similar.
FPGAs
GPGPU
This is a fantastic opportunity for a competent Engineer looking for autonomy in design decisions.
....Read more...
Type: Permanent Location: Reading, England
Start: ASAP
Duration: Permanent
Salary / Rate: £38000 - £55000 Per Annum None
Posted: 2025-12-10 09:41:50
-
Are you looking for the best FPGA Design Engineer jobs? Want to work for an industry leader?
A challenging opportunity for a FPGA Design Engineer - VHDL based in Berkshire has become available with a leader in state-of-the-art electronics.
My client is a worldwide provider of innovative electronics for a range of industries predominantly in the image/video markets.
As a FPGA Design Engineer - VHDL you will be involved in the innovative design and development of new FPGA and digital electronic components.
You will be involved in full life-cycle design including specification, design, implementation, simulation and hardware testing.
A FPGA Design Engineer - VHDL will have:
- Degree educated in electronic engineering or a similar discipline.
- You will have a good understanding of designing with FPGAs - ideally Xilinx
- VHDL Experience
This is a fantastic opportunity to have a huge impact on a vastly growing company within the Berkshire area.
Hybrid working available.
If this job opportunity as a FPGA Design Engineer based in Berkshire, could be of interest, send your CV to rwilcocks@redlinegroup.Com or call 01582 878810/ 07931788834. ....Read more...
Type: Permanent Location: Berkshire, England
Start: ASAP
Salary / Rate: £40000 - £65000 per annum
Posted: 2025-12-10 09:28:08
-
Senior Test Development Engineer - Power Electronics & Battery Systems
Are you a Senior Test Development Engineer with strong experience in automated test systems and high-power electronics, looking to shape next-generation battery charging technology?
Our client, a global leader in green energy tech, is expanding their specialist R&D team in Glasgow, Scotland.
This hybrid role offers clear progression, technical ownership, and the chance to influence test strategy for cutting-edge power solutions used in robotics, defence, rail, and industrial automation.
Key Responsibilities for this Senior Test Development Engineer job are:
Develop automated test systems for high-power battery chargers and AC/DC converters.
Create test architectures covering validation, characterisation, and production test.
Design hardware-in-the-loop and power-stage test setups using advanced lab instrumentation.
Build, optimise, and maintain automated test scripts and frameworks (LabVIEW/Python).
Work closely with design teams to drive reliability, safety, and compliance improvements.
Requirements for this Senior Test Development Engineer job are:
5+ years of experience in test development for power electronics or high-power systems.
Strong LabVIEW and/or Python programming for automation and data analysis.
Background in power converters, magnetics, switching devices, or control systems.
Hands-on experience with oscilloscopes, dataloggers, power meters, and test rigs.
Industry exposure in defence, data centres, industrial, traction, or similar sectors is a plus.
Degree in Electrical/Electronic Engineering or a related discipline.
To apply for this Senior Test Development Engineer role, please send your CV to NDrain@redlinegroup.Com or call 01582 878828. ....Read more...
Type: Permanent Location: Glasgow, Scotland
Start: ASAP
Posted: 2025-12-10 09:24:04
-
Electronics Test Engineer
Location: Horsham, West Sussex
Salary: £35,000 £40,000 per annum
Hours: Full-time, Monday to Friday, onsite
The Role We are seeking a skilled Test Engineer to join the Test Department of a leading technology business in Horsham.
Reporting to the Test Engineering Manager, you will be responsible for testing electroâopticalâmechanical components, sub-assemblies, and complete systems, ensuring accuracy of results, diagnosing faults, and supporting the wider engineering team in resolving production or design issues.
This is an exciting opportunity for someone with strong hands-on electrical/electro-mechanical test expertise to contribute to developing high-quality, cutting-edge products in a collaborative engineering environment.
Key Responsibilities
- Carry out Factory Acceptance Tests (FATs) using standard test equipment (power supplies, oscilloscopes, digital multi-meters).
- Assist in the creation of comprehensive test procedures and FAT documentation.
- Fault-find across a wide range of electromechanical equipment.
- Communicate effectively with both technical and non-technical colleagues.
- Ensure compliance with quality processes, ISO9001 standards, and company policies.
- Maintain accurate test documentation and reporting.
- Contribute to continuous improvement of test processes and facilities.
- Support field service activities when required.
- Maintain a safe, clean, and well-organised workshop and office environment.
Skills & Experience
Essential:
- Strong knowledge of testing electrical and electro-mechanical systems.
- Ability to write and execute test plans and FATs for new product launches.
- Competent in reading technical drawings, wiring diagrams, and PCB schematics.
- Ability to support wider production and quality teams where needed.
- HNC or equivalent qualification in Electronics Engineering.
- Hands-on experience in manual testing and integration.
- Computer literate with experience in Microsoft Word & Excel.
Desirable:
- PCB testing and fault-finding experience.
- Familiarity with digital camera and video protocols.
- Knowledge of automated test software.
- Awareness of communication protocols and networking.
- Experience in PLC programming, CAD packages.
To find out more please contact Max Sinclair max@holtengineering.co.uk or hit apply! ....Read more...
Type: Permanent Location: Rusper,England
Start: 10/12/2025
Salary / Rate: £35000 - £40000 per annum
Posted: 2025-12-10 07:27:10
-
JOB DESCRIPTION
WE WILL TRAIN YOU! NOW HIRING IN MULTIPLE LOCATIONS!
The Commercial Façade Field Technician actively performs and enforces Company safety policy and program to minimize accidents affecting employees, the public, and property.
They will be responsible for attending safety meetings, complying with governmental regulations, reporting, and investigating accidents, and planning site-specific job safety procedures including:
$21-38/hour (not including prevailing wage)
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Attend and understand daily onsite safety brief prior to the start of the WTI project.
Inspect and ensure safety of surroundings, equipment and tools and identify and discuss any safety concerns.
Execution of project tasks with knowledge of expected production rates, ensuring tools and materials are used safely and efficiently to complete the assigned project. Complete the project per the scope or work, design and specification of contract & engineering documents as directed by foreman.
Responsible to aid foreman in tracking and monitoring project inventory. Maintains highest quality on-site customer relations in projecting positive image. Has knowledge/understanding and performs work in compliance with all governmental rules and regulations affecting work sites and employees, i.e.
OSHA, DOT, EEO/Affirmative Action, EPA, etc. Provides management with earliest possible notification of real and potential job problems. Accepts responsibility for the care, custody, and use of company equipment, material, tools, and other assets as assigned by the WTI Commercial Foreman. Understands and executes proper material and equipment usage, maintenance, and storage. Perform any other duty and/or project as required or assigned by the WTI Foreman and/or Commercial Business Manager. Maintains ethical business conduct.
Job Requirements:
Masons & Tuckpointers Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Cold Applied Waterproofing Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $21 and $38.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Jacksonville, Florida
Posted: 2025-12-10 06:08:06
-
JOB DESCRIPTION
WE WILL TRAIN YOU! NOW HIRING IN MULTIPLE LOCATIONS!
The Commercial Façade Field Technician actively performs and enforces Company safety policy and program to minimize accidents affecting employees, the public, and property.
They will be responsible for attending safety meetings, complying with governmental regulations, reporting, and investigating accidents, and planning site-specific job safety procedures including:
$21-38/hour (not including prevailing wage)
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Attend and understand daily onsite safety brief prior to the start of the WTI project.
Inspect and ensure safety of surroundings, equipment and tools and identify and discuss any safety concerns.
Execution of project tasks with knowledge of expected production rates, ensuring tools and materials are used safely and efficiently to complete the assigned project. Complete the project per the scope or work, design and specification of contract & engineering documents as directed by foreman.
Responsible to aid foreman in tracking and monitoring project inventory. Maintains highest quality on-site customer relations in projecting positive image. Has knowledge/understanding and performs work in compliance with all governmental rules and regulations affecting work sites and employees, i.e.
OSHA, DOT, EEO/Affirmative Action, EPA, etc. Provides management with earliest possible notification of real and potential job problems. Accepts responsibility for the care, custody, and use of company equipment, material, tools, and other assets as assigned by the WTI Commercial Foreman. Understands and executes proper material and equipment usage, maintenance, and storage. Perform any other duty and/or project as required or assigned by the WTI Foreman and/or Commercial Business Manager. Maintains ethical business conduct.
Job Requirements:
Masons & Tuckpointers Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Cold Applied Waterproofing Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $21 and $38.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Jacksonville, Florida
Posted: 2025-12-10 06:07:57
-
JOB DESCRIPTION
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Attend and understand daily onsite safety brief prior to the start of the WTI project.
Inspect and ensure safety of surroundings, equipment and tools and identify and discuss any safety concerns.
Execution of project tasks with knowledge of expected production rates, ensuring tools and materials are used safely and efficiently to complete the assigned project. Complete the project per the scope or work, design and specification of contract & engineering documents as directed by foreman.
Responsible to aid foreman in tracking and monitoring project inventory. Maintains highest quality on-site customer relations in projecting positive image. Has knowledge/understanding and performs work in compliance with all governmental rules and regulations affecting work sites and employees, i.e.
OSHA, DOT, EEO/Affirmative Action, EPA, etc. Provides management with earliest possible notification of real and potential job problems. Accepts responsibility for the care, custody, and use of company equipment, material, tools, and other assets as assigned by the WTI Commercial Foreman. Understands and executes proper material and equipment usage, maintenance, and storage. Perform any other duty and/or project as required or assigned by the WTI Foreman and/or Commercial Business Manager. Maintains ethical business conduct.
Job Requirements:
Masons & Tuckpointers Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Cold Applied Waterproofing Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $21 and $38.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Jacksonville, Florida
Posted: 2025-12-10 06:07:57
-
JOB DESCRIPTION
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Attend and understand daily onsite safety brief prior to the start of the WTI project.
Inspect and ensure safety of surroundings, equipment and tools and identify and discuss any safety concerns.
Execution of project tasks with knowledge of expected production rates, ensuring tools and materials are used safely and efficiently to complete the assigned project. Complete the project per the scope or work, design and specification of contract & engineering documents as directed by foreman.
Responsible to aid foreman in tracking and monitoring project inventory. Maintains highest quality on-site customer relations in projecting positive image. Has knowledge/understanding and performs work in compliance with all governmental rules and regulations affecting work sites and employees, i.e.
OSHA, DOT, EEO/Affirmative Action, EPA, etc. Provides management with earliest possible notification of real and potential job problems. Accepts responsibility for the care, custody, and use of company equipment, material, tools, and other assets as assigned by the WTI Commercial Foreman. Understands and executes proper material and equipment usage, maintenance, and storage. Perform any other duty and/or project as required or assigned by the WTI Foreman and/or Commercial Business Manager. Maintains ethical business conduct.
Job Requirements:
Masons & Tuckpointers Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Cold Applied Waterproofing Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $21 and $38.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Jacksonville, Florida
Posted: 2025-12-10 06:07:53
-
An exciting opportunity has arisen for a Electronic Engineer based in Milton Keynes, Buckinghamshire to join a leading engineering company that design a range of electronic components and systems for aerospace and defence applications.
The main purpose of the Electronic Engineer role, based in Milton Keynes, Buckinghamshire, will be to Lead the design and layout of PCBAs and thick film hybrid circuits for new and existing products.
You will work with packages such as Altium Designer to produce detailed PCB and substrate layouts, wire bonding layouts, and package designs.
Some of the key experiences and competencies for the Electronic Engineer, based in Milton Keynes, Buckinghamshire will be to work to aerospace / defence standards ideally within a microelectronic product line.
You will have a strong Electronics engineering background, including analogue/digital circuit design.
This is a great opportunity to join a highly successful, multi-national engineering company with a fantastic working environment and benefits.
Apply Now, if this Electronic Engineer job based in Milton Keynes, Buckinghamshire sounds like the opportunity for you, click the APPLY NOW button, or alternatively call Tom Drew on 01582 878 848 or email TDrew@redlinegroup.Com quoting THD1299.
Alternatively, if this job is not suitable but you are looking for a job within Engineering, please call 07961158762 for a confidential discussion. ....Read more...
Type: Permanent Location: Milton Keynes, England
Start: ASAP
Salary / Rate: £50000 - £55000 per annum
Posted: 2025-12-10 00:00:04
-
A highly skilled Principal Electronics Engineer Job has come up to join my client who is a global leader in developing embedded computing, based in Northamptonshire.
With a high investment in research and development, several on-going projects and substantial growth, my client are looking to recruit a Principal Electronics Engineer to join their R&D department.
This Principal Electronics Engineer Job will be responsible for technical and project leadership and the leading of a cross-functional team of engineers working on the development of high-performance Graphic Cards, Sensor Processing products and Network Switches.
The successful applicant with be happy to embrace a culture of outstanding team work as well as the ability to work under own direction.
This Principal Electronics Engineer Job will have extensive skills in Hardware development and be a good influencer and communicator.
Self-motivation and good organisation are essential.
Ideal candidates for the Principal Electronics Engineer job based in Northamptonshire will have design and development experience in the following areas:
Designing high speed digital circuits that utilise the latest FPGA, Microprocessor and high-speed interconnect technologies.
Schematic Capture using Altium.
Integrating in-house designs with COTS modules (power supplies, single board computers, RF interfaces).
The successful candidate for this Principal Electronics Engineer job will have:
A degree educated in Electronic Engineering or similar subjects with provable practical design experience, ideally in an aerospace or defence company
Working knowledge of serial interfaces i.E.
RS485, RS422, MLVDS.
Mixed signal knowledge using ADC/DAC, FPGA, SoC based design for high performance signal processing, communications and control.
This is a fantastic opportunity to join a well-established, highly profitable company investing heavily in R&D.
If you would like further information on the Principal Electronics Engineer Job opportunity, based in Northamptonshire, please send an up to date CV to rwilcocks@RedlineGroup.Com or call Ricky Wilcocks on 01582 878810. ....Read more...
Type: Permanent Location: Northamptonshire, England
Start: ASAP
Salary / Rate: £30000 - £80000 per annum
Posted: 2025-12-10 00:00:04
-
Advert Ref: RMW1198
East Sussex
Attractive Salary plus company benefits
A world leader in design and manufacturing of leading edge technologies is looking for a Quality Manager to be based at their site in East Sussex to join their growing engineering team.
The role of Quality Manager will be responsible for ensuring site Quality Management processes and procedures meet the requirements of International standards, customer requirements and company global standards.
The main responsibilities for the job of Quality Manager:
- To successfully improve product and process quality.
- To plan and lead internal quality management system audits to relevant international standards.
- Implementation and maintenance of the site annual Quality plan aligned to both local and group level Quality objectives.
A successful candidate for the Quality Manager job will have the following:
- Recent experience in a quality position with an ISO 9001, AS9100 or TS16949 certified organisation.
- IRCA/CQI chartership is preferred
- QMS lead auditor trained is mandatory
- A demonstrated track record of continuous improvement across various business functions.
- Experience of Electro-mechanical or electronics industry preferred but not essential.
- Business or technically based degree preferable
- Practical experience of supporting the design process from a quality perspective
This is a fantastic opportunity for a Quality Manager to join a global leader offering fantastic career progression opportunities and very competitive salaries.
APPLY Now! For interested and qualified applicants for the Quality Manager job in East Sussex, please send your updated CV to Ricky Wilcocks and email rwilcocks@redlinegroup.Com or call 01582 87 8810 or 079317 88834. ....Read more...
Type: Permanent Location: East Sussex, England
Start: ASAP
Salary / Rate: £43000 - £59000 per annum
Posted: 2025-12-10 00:00:04
-
An exciting opportunity for an experienced Senior RF Design Engineer to join a leading technology and engineering company specialising in advanced communication and defence systems.
You will play a key role in designing and developing high-performance RF systems used across defence, aerospace, and critical infrastructure sectors.
Key Responsibilities
Design and develop RF systems, including transmitters, receivers, filters, and amplifiers.
Work on schematic capture, PCB layout, and RF simulation (Altium and similar tools).
Support product testing, troubleshooting, and design verification.
Collaborate with multi-disciplinary engineering teams throughout the product lifecycle.
Mentor junior engineers and contribute to continuous process improvement.
Key Skills
Proven experience in RF design and development (amplifiers, filters, or transceivers).
Strong knowledge of RF simulation tools and PCB design software.
Practical experience testing and troubleshooting prototypes.
Degree in Electronics, Electrical Engineering, or equivalent.
Eligible for UK Security Clearance (British Citizenship required).
Why Join
Competitive salary and bonus structure.
Hybrid working and career development opportunities.
Work on cutting-edge technology that supports national security and innovation. ....Read more...
Type: Permanent Location: Brackley, England
Start: ASAP
Duration: Permanent
Salary / Rate: £65000 - £70000 Per Annum None
Posted: 2025-12-09 18:19:58
-
We are looking for a motivated Systems Engineer to join our dynamic engineering team.
You will help drive projects that deliver innovative, high performance automotive technologies.
Responsibilities
Capture, analyse, and manage system requirements
Support system architecture and design using MBSE principles (SysML, MATLAB, Simulink)
Collaborate across hardware, software, and mechanical teams
Contribute to system verification through test specification and results review
Maintain requirements traceability and documentation using tools like Siemens Polarion, Jira, and Confluence
Skills
Degree in a relevant engineering discipline
Experience in Systems Engineering or Requirements Management
Strong problem-solving and communication skills
Automotive industry experience
Familiarity with UML, SysML, MATLAB/Simulink
Understanding of electric or hybrid powertrains ....Read more...
Type: Permanent Location: Farnham, England
Start: ASAP
Duration: Permanent
Salary / Rate: £38000 - £45000 Per Annum None
Posted: 2025-12-09 18:18:56
-
We are looking for an experienced Senior Digital Design Lead to drive the development, implementation, and maintenance of CAD and BIM standards across multi-disciplinary engineering projects in the Energy and Resources sector.
You will lead the strategy and governance of digital design, ensuring consistency and quality across platforms like Revit, Civil 3D, and Inventor, while coordinating with UK teams and an offshore design centre.
This hands-on role includes overseeing a team of BIM modellers and supporting complex projects
Key Responsibilities
Degree in Engineering, Architecture, or related field
Proven BIM leadership experience across large-scale, multi-sector projects
Skilled in Autodesk
Strong understanding of CDEs
Knowledge of ISO 19650 standards
Confident communicator with mentoring experience ....Read more...
Type: Permanent Location: Edinburgh, Scotland
Start: ASAP
Duration: Permanent
Salary / Rate: £55000 - £65000 Per Annum None
Posted: 2025-12-09 18:15:54
-
Motor Drives Engineer required to work on algorithms and systems for direct drive permanent magnet electric motors.
Control algorithm experience distributing torque and optimising energy efficiency would be ideal.
Requirements
Electric Vehicle development experience CAN Bus communications, electrical powertrains and control experience.
MATLAB and Simulink
Harness design process knowledge
Degree in software development, electronics, motor control or automotive engineering.
Responsibilities
Design, verification and validation of electric vehicle controls systems.
Development of torque vectoring traction control and ABS.
Brake by wire research and modelling.
Electrical power system architecture
Software development in Simulink, hardware in the loop, HIL, dyno and firmware across the vehicle. ....Read more...
Type: Permanent Location: Alton, England
Start: ASAP
Duration: Permanent
Salary / Rate: £35000 - £60000 Per Annum None
Posted: 2025-12-09 18:12:52
-
Highway Engineer required to join a civil engineering team delivering highways and public payment systems.
You will prepare and develop concepts, designs and specific elements for both foreign and domestic Highway Authorities, also private developers.
Requirements
Highway design civil engineering experience.
Civil 3D and AutoCAD experience producing drawings, models, schedules etc.
Construction Design and Management Regulations or CDM for national and local highway design.
MEng or BEng in Engineering.
Working towards Chartered Civil Engineer (CEng).
Responsibilities
Highway and public transport design.
Producing drawings,
Manage design packages
Site visits to measure and assess progress.
Assess Road construction methods, materials, and quality ....Read more...
Type: Permanent Location: Edinburgh, Scotland
Start: ASAP
Duration: Permanent
Salary / Rate: £32000 - £45000 Per Annum None
Posted: 2025-12-09 18:12:50
-
Production Engineer - CNC Machining
Take the next step in your engineering career with Penta.
We're looking for a Production Engineer to join our Production Preparation Team.
If you're an experienced machinist, CNC expert, or simply someone who thrives on solving problems and making things run smoothly, this could be the perfect role for you.
What you'll be doing
You'll ensure everything is in place before machining begins—materials, tooling, equipment, drawings, and CAD files—;so production runs efficiently, reliably, and to the highest quality standards.
You'll confirm customer requirements, prepare works order packs, and provide technical support to colleagues and customers.
You'll also play a hands-on role in improving how we prepare and plan our work, helping Penta deliver exceptional results every time.
What we're looking for
, A solid understanding of CNC machining processes., Confidence to engage with customers to clarify requirements and offer informed machining design advice where appropriate., Inquisitive with a strong attention to detail, the confidence to make decisions and translate customer requirements into clear, accurate work instructions., A collaborative approach, always ready to support colleagues and improve the way we work., A self-starter and team player who can manage their priorities and time., Computer and CAD/CAM literate and willing to train and adopt Autodesk Fusion 360.
If you're a machinist ready for the next step, don't worry if you don't tick every box.
If you share our values—flexibility, care, continuous improvement, teamwork—we'll invest in your development.
What's in it for you
, Competitive salary - tell us what you're looking for; if you're right for us, we'll make it work., Profit-related bonus scheme., 34 days' annual leave (including statutory holidays) - plus your birthday off!, Company sickness scheme, Contributory pension (qualifying criteria apply)., A modern, forward-thinking work environment with supportive colleagues., Hours: Mon-Thu 7:30am-5:00pm (30 min lunch), Fri 7:30am-12:30pm.
About Penta
Founded in 1998 by five engineers, Penta has grown into a trusted partner for aerospace, defence, medical, marine and scientific industries.
In 2012, we achieved ship-to-stock status with a major aerospace OEM after maintaining a quality performance of over 99.5%.
Since then, we've invested in new facilities, people, and 24/7 automated 5-axis machinery—trebling our size and capabilities.
Our Core Target is simple: to be “the engineering company where everyone wants to work, and everyone wants to buy from.”
Ready to apply?
If you're excited by this opportunity and ready to grow with us, we'd love to hear from you.
Apply today and take the next big step in your career. ....Read more...
Type: Permanent Location: Fareham, England
Start: ASAP
Salary / Rate: £40000.00 - £55000.00 per annum
Posted: 2025-12-09 16:46:43
-
Electrical Technician role paying £23 per hour, providing LTD company and CIS opportunities.
The role is working for a world leading Chemical Manufacturer based in the Bradford area.
The role offers free onsite parking which provides easy commutes from surrounding areas such as Huddersfield, Dewsbury, Mirfield, Birstall and Brighouse.
Key Information for the Electrical Technician:
£23 Per Hour (Ltd Company or CIS)
Monday - Friday Days (39 hours per week)
Working 7am - 3.30pm
30pm Finish on a Friday
Who Will You Be Working For?
The business are a leader in the UK in the full turnkey delivery of CAPEX Projects.
They specialise within the design, manufacture and installation of bespoke projects to their many clients across the UK.
They cover projects across industries within Chemical, Pharmaceutical, Food & Beverage and Industrial Manufacturing.
The role of Electrical Technician
This hands-on role involves performing a wide range of electrical maintenance activities, including fault finding, breakdown response, and planned preventive maintenance (PPM).
You will ensure the safe, reliable, and compliant operation of electrical systems across the site's production, utilities, and storage areas.
Working within a high-hazard environment, you will play a key part in maintaining safety, operational performance, and adherence to regulatory standards.
Carry out reactive maintenance, fault diagnosis, and repair of electrical equipment and systems across the site.
Perform planned preventive maintenance (PPMs) to maximise equipment reliability and minimise downtime.
Work safely and effectively within an upper-tier COMAH environment, following all site safety procedures, permits-to-work, and risk controls.
Install, test, inspect, and maintain electrical systems, including motors, control panels, instrumentation interfaces, and plant services.
Support continuous improvement activities, contributing to equipment upgrades, modifications, and reliability initiatives.
I am keen to speak to anyone with the following experience:
Skills and Experience Needed of the Electrical Technician:
Prior experience as an Electrical Technician in a chemical, manufacturing, or heavy industrial environment.
Strong understanding of electrical maintenance within high-hazard or safety-critical settings (COMAH experience desirable but not essential if similar experience is held).
18th Edition Wiring Regulations qualification (essential).
NVQ Level 3 in Electrical Engineering or equivalent vocational qualification (essential).
Competent in fault finding on complex electrical systems and control equipment.
How to Apply: To apply for the role of Electrical Technician, please submit your CV for review.
Alternatively, please reach out to Toni-Marie Monks at E3 Recruitment.
....Read more...
Type: Contract Location: Bradford, England
Start: ASAP
Salary / Rate: Up to £23 per hour + 1.30pm Finish on a Friday!
Posted: 2025-12-09 13:51:56
-
Assistant Showroom Manager - Step Into a World of Luxury Location: Notting Hill, London Salary: £28,000 - £34,000 (DOE) Hours: Full-time | 10am-6pm, Monday to Saturday | No Sundays
Looking to elevate your retail career? If you're ready to swap high street hustle for a slower-paced, service-led environment, this is your chance to join a celebrated, family-owned jewellery brand in the heart of Notting Hill.
Their beautifully curated showroom is known for its craftsmanship, creativity and unmistakably elegant atmosphere.
Whether you're currently a Senior Sales Assistant, Supervisor or Assistant Manager in fashion, accessories or jewellery, this role gives you the space to build meaningful relationships with customers, represent a premium product and enjoy a more balanced working week.
Why you'll love this role
No Sunday trading - reclaim your weekends
Luxury product & clientele - enjoy one-to-one, consultative service
A brand with heritage - creativity, craftsmanship and loyal customers
A small, supportive team - where your contribution is seen and valued
A true step up - move away from fast-paced retail into a refined, boutique setting
What you'll be doing
As Assistant Showroom Manager, you'll support the smooth running of the showroom and set the tone for exceptional service on the shop floor.
You'll welcome both local and international clients, guide a small team, uphold impeccable visual standards and ensure every detail, from displays to online orders, reflects the quality of the brand.
What we're looking for
Experience as an Assistant Manager, Supervisor or Senior Sales in fashion, jewellery or accessories
A track record of delivering exceptional service and driving sales
A polished, confident and proactive approach
Genuine passion for design, craftsmanship and luxury lifestyle products
Someone excited to step into a calmer, premium retail environment
What's on offer
Competitive salary up to £34,000 DOE
A stunning showroom in vibrant Notting Hill
No Sundays - improved work-life balance
Real scope to grow your career in luxury retail
If you're ready to leave fast fashion behind and step into a boutique environment where customer experience truly matters, we'd love to hear from you.
Apply today and discover your future in luxury retail.
By applying for this role, you are consenting for C2 Recruitment to hold and process your data in compliance with the General Data Protection Regulations.
To view other great vacancies at C2 Recruitment, please visit our website or call us for a confidential chat about upcoming opportunities in:
Buying & Merchandising and Ecommerce | Charity & Non Profit | Design, Technical, Wholesale & Production | Finance | HR & Talent | H&S & Compliance | Hospitality, Catering & Leisure | Marketing, Digital & Technology | Office & Administration | Property & Centre Management | Retail, Trade and Luxury Operations | Senior Appointments & Executive | Sales & FMCG | Supply Chain & Logistics & Warehouse | Manufacturing & Engineering
....Read more...
Type: Permanent Location: West End, England
Salary / Rate: £28000 - £34000 per annum + Great Benefits
Posted: 2025-12-09 13:34:24
-
Technical Sales Engineer role paying up to £45,000 annually + generous holidays package, company pension scheme and a 1.30pm finish every Friday! The role offers career development opportunities and the chnce to develop your skills further.
Salary and Benefits of the Technical Sales Engineer
Annual Salary Between £40,000 - £45,000
25 Holidays + 8 Additional Bank Holidays
30pm Finish on a Friday
Company Pension Scheme
Healthcare Cashback Plan
Who are the business?
The company are a market leading Engineering Consultancy based in the Dewsbury area.
They specialise in Projects, Design, Fabrication and Consultancy needs with full turnkey engineering solutions.
Their clients are based across the UK, providing exciting opportunities to build strong customer relationships.
Their head offices in Dewsbury offer free onsite parking, with commutable links from Leeds, Bradford, Wakefield, Ossett, Huddersfield and other surrounding areas.
The role of Technical Sales Engineer
The Technical Sales Engineer will be responsible for responding to enquiries, visiting customer sites, defining technical specifications and preparing detailed tender documentation for both the steelwork and water treatment equipment.
Key Responsibilities of the Technical Sales Engineer:
Act as the primary technical contact for incoming customer enquiries.
Conduct technical discussions with clients to clarify project requirements and identify suitable solutions.
Prepare complete tender packages, including technical scope, bill of quantities, method statements, and cost estimates.
Coordinate inputs from engineering, procurement, and supply chain teams to ensure accurate and competitive bids.
Develop detailed technical specifications for steelwork structures and water-treatment equipment (e.g., clarifiers, screens, chemical dosing systems, filtration units)
I am keen to speak to candidates with the following background…
Experience within the Water Treatment / Water industry.
Proven experience of responding to enquiries, visiting customer sites and client facing duties.
Strong working knowledge of preparing detailed tender documentation for Steelwork and Water Treatment Equipment.
Prior experience with estimating and quoting in the Water industry.
How to Apply: To apply for the role of Technical Sales Engineer, please submit your CV direct for review.
Alternatively, please reach out to Toni-Marie Monks at E3 Recruitment for more details. ....Read more...
Type: Permanent Location: Dewsbury, England
Start: ASAP
Salary / Rate: £43000.00 - £45000.00 per annum + Pension, 33 Holidays + Early Fridays
Posted: 2025-12-09 12:25:32
-
Industrial Electrician role working for a UK leader within engineering consultancy.
Paying £24 per hour with a 1.30pm finish on a Friday.
You will be based at their head offices in Dewsbury, and the role offers free onsite parking with easy transport links from Leeds, Bradford, Wakefield, Batley, Birstall and other surrounding areas.
Key Information
£24 Per Hour (Ltd Company or CIS)
Monday - Friday Days (39 hours per week)
Working 8am - 5pm
30pm Finish on a Friday
Who Will You Be Working For?
The business are a leader in the UK in the full turnkey delivery of CAPEX Projects.
They specialise within the design, manufacture and installation of bespoke projects to their many clients across the UK.
They cover projects across industries within Chemical, Pharmaceutical, Food & Beverage and Industrial Manufacturing.
The role of Industrial Electrician
As the Industrial Electrician, you will be working in accordance with technical electrical drawings.
You will also work to instructions for fabrication and installation of cable containment and cabling.
The role of the Industrial Electrician is to ensure the electrical installation is in compliance with the relevant British Standards including the latest revisions.
Key Responsibilities
To have a good understanding of the types of industrial electrical work to be carried out.
To understand and adhere to RAMS.
To carry out duties in a manner that endangers neither themselves nor others and to ensure correct personal use of PPE in accordance with the site they are working on and what is specified in the RAMS to which they are working to.
To understand and work in accordance with construction plans & drawings.
Ensure the electrical Installation is carried out to a high standard and in accordance with relevant British standards including the latest revision.
To attend and engage in regular toolbox talks with electrical Installation personnel.
Travel to other sites and locations will be required.
I am keen to speak to anyone with the following experience:
Essential Skills and Experience Needed of the Industrial Electrician:
CompEx Qualified Electrician (or equivalent 18th Edition, City and Guilds, NVQ, ECS Gold Card etc).
Experience of working in industrial or manufacturing industries (e.g.
chemical, pharmaceutical, food and beverage, heavy industry manufacturing etc).
Strong working knowledge of British Electrical Standards.
Ability to read and understand Construction Plans and Drawings.
A full UK Driving License will be essential for this role.
How to Apply: To apply for the role of Industrial Electrician, please submit your CV for review.
Alternatively, please reach out to Toni-Marie Monks at E3 Recruitment. ....Read more...
Type: Contract Location: Dewsbury, England
Start: ASAP
Salary / Rate: Up to £24 per hour + 1.30pm Finish on a Friday!
Posted: 2025-12-09 11:39:27
