-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude.
All candidates are required to pass drug test and background check.Apply for this ad Online! ....Read more...
Type: Permanent Location: Westfield, Massachusetts
Posted: 2026-04-20 22:11:44
-
We are looking for a Children Social Worker to join Family Safeguarding Team.
THIS POST REQUIRES A SOCIAL WORK QUALIFICATION OF A MINIMUM 3 YEAR PERMANENT EXPERIENCE.
About the team
This team is seeking a social worker to join their Family Safeguarding Team This team is a front line team built up of social workers, early help workers, education, health and police.
The team will gather information and safeguard over to relevant teams to later determine the right path for the child.
This team operates to a flexiable working from home and in the office balance.
About you
A social work degree (Degree/DipSW/CQSW) with a minimum of 3 years permanent experience within Local Authority based Social Work.
It's essential to have experience of working either in a Front Door, Children in Need, Child Protection.
A valid UK driving licence and vehicle are essential in order to be considered for this role.
Benefits
“Good” Ofsted inspection results
£336.00 per hour (PAYE payment options available also)
Parking available nearby/ onsite
Working from home on a hybrid basis
On going support given within the team
For more information, please do contact
Zoe Bellinger- Team Manager
07384466390 ....Read more...
Type: Contract Location: East Midlands, England
Salary / Rate: £36.00 - £36 per hour
Posted: 2026-04-20 16:16:41
-
Part-Time SENCO - Flexible Leadership Role in a Supportive Primary School
Location: Wandsworth, South West London Start Date: September 2026 Contract Type: Part-Time (1.5 days per week) Salary: Competitive salary (negotiable depending on experience) Sector: Education and Training / Special Educational Needs (SEN)
A Rewarding SENCO Opportunity with Excellent Work-Life Balance
We are seeking a dedicated and experienced Part-Time SENCO (Special Educational Needs Coordinator) to join a welcoming Roman Catholic primary school in Wandsworth this September.
This part-time SENCO role offers an excellent opportunity for an experienced SEND professional, SENCO, or Assistant SENCO looking for a flexible leadership position within a supportive and values-driven school community.
The role is ideal for professionals seeking a better work-life balance, portfolio career, or step into SEND leadership on a reduced timetable.
You will join a school with a strong inclusive ethos where every child is supported to thrive academically, socially, and emotionally.
The school is recognised for its nurturing environment, strong behaviour standards, and collaborative staff culture.
About the School
This friendly and inclusive primary school in Wandsworth places a strong emphasis on community, wellbeing, and high-quality education for all pupils.
The school delivers a broad and engaging curriculum and has established strong systems to support pupils with Special Educational Needs and Disabilities (SEND).
The school offers:
A supportive and approachable senior leadership team
Strong behaviour and safeguarding systems
Positive and inclusive school culture
Well-established SEND provision and processes
Strong relationships with parents and the wider community
A recent inspection rating of “Good” overall, with “Outstanding” behaviour and attitudes
A safe, caring, and welcoming working environment
This is an excellent opportunity for a SENCO to make a meaningful impact in a school that values inclusion, collaboration, and pupil wellbeing.
Role Responsibilities - Part-Time SENCO
As Part-Time SENCO, you will:
Lead and manage SEND provision across the school
Oversee and monitor EHCPs, IEPs, and support plans
Provide guidance and support to teachers on inclusive classroom practice
Liaise effectively with parents, carers, external agencies, and professionals
Ensure compliance with the SEND Code of Practice and statutory requirements
Track pupil progress and support interventions
Promote an inclusive learning environment for all pupils
Contribute to whole-school improvement and safeguarding processes
The Ideal Candidate
We are looking for an organised and compassionate SENCO who is committed to inclusive education and pupil success.
Essential Requirements
Previous experience working as a SENCO, Assistant SENCO, or in a SEND leadership role
Strong knowledge of the SEND Code of Practice
Excellent communication, organisation, and leadership skills
A genuine passion for supporting pupils with additional needs
Ability to work collaboratively with staff and families
Enhanced DBS Certificate on the Update Service (or willingness to obtain one)
Right to work in the UK
Desirable
NASENCO qualification or working towards SENCO accreditation
Experience within a primary school setting
Suitable For
SENCO
Part-Time SENCO
SENDCo
Assistant SENCO
Inclusion Manager
SEND Leader
Teachers seeking part-time leadership roles
Professionals seeking flexible SENCO jobs in London
Why Apply for This Part-Time SENCO Role?
Flexible part-time working pattern (1.5 days per week)
Leadership opportunity within a supportive school
Strong and collaborative staff team
Opportunity to shape and develop SEND provision
Positive school culture and inclusive ethos
Meaningful and rewarding role supporting pupils with SEND
Excellent work-life balance
About Teach Plus
Teach Plus is a 5 star, Google rated, London based education recruitment agency.
Our passion is to provide candidates with an excellent service in helping them find a new role, our candidate journey is what makes us stand out above the rest.
We prioritise ongoing assistance and support to help with your career in education.
With over 17 years' experience working in education, we have strong, long-lasting relationships with primary schools across London.
We are able to offer a range of opportunities including short term, long term and permanent positions within education as well as a high volume of daily supply work.
Apply Now
If you are an experienced SENCO looking for a part-time SEND leadership role in Wandsworth starting in September 2026, apply today and Carly from Teach Plus will be in touch to discuss the opportunity.
CV Library SEO Keywords Included
Part-Time SENCO, SENCO, SENDCo, Special Educational Needs Coordinator, SEN Teacher, SEND Leader, Inclusion Manager, Assistant SENCO, Primary SENCO, SEND Jobs London, SEN Jobs Wandsworth, Part-Time Education Jobs, SEND Leadership Role, SENCO Jobs London, Special Needs Coordinator, Education Leadership Jobs, Flexible Teaching Jobs ....Read more...
Type: Contract Location: Wandsworth, England
Start: 01/09/2026
Salary / Rate: £120 - £150 per day
Posted: 2026-04-20 14:18:58
-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude.
All candidates are required to pass drug test and background check.Apply for this ad Online! ....Read more...
Type: Permanent Location: Westfield, Massachusetts
Posted: 2026-04-20 14:09:49
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
The Design Engineer assesses project requirements, gathers technical field data, determines design requirements, selects appropriate equipment, and provides drafting of HVAC (Heating, Ventilation, and Air Conditioning) restoration projects.
This role combines engineering expertise with drafting skills to ensure that projects are planned and constructed effectively.
Must live in Clearwater, Florida.
Relocation package offered.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
• Conducts on-site visits and assessments to understand the specific scope and technical requirements of individual projects.
This includes evaluating existing HVAC systems, identifying issues or challenges, and testing equipment performance.
• Determines scope and designs solutions for HVAC restoration projects via site visits and coordination with owner/facility staff.
• Understands components and functions of existing mechanical systems being altered or renovated.
• Exercises control over design and production tasks to enable HVAC restoration projects.
• Drafts construction documents and generates specifications for HVAC restoration projects.
• Utilizes in-house estimating tools to create project budgets.
• Assists the sales team with scope reviews and support as needed.
• Creates, maintains, and improves drafting tools and templates.
• Determines the estimated cost of HVAC projects.
This includes calculating costs for labor, materials, equipment, subcontractors, and any other expenses associated with the project.
• Ensures a smooth transition from design to project execution, providing technical guidance and insights during and after construction.
• Other duties as assigned by the manager.
CERTIFICATES, LICENSES, REGISTRATIONS:
• Engineer Intern (EI) Certification
• Professional Engineer (PE) License is preferred
OTHER SKILLS AND ABILITIES:
• Bachelor's degree or equivalent experience.
• 5+ years of industry-specific experience.
• Experience with construction drafting in AutoCAD.
• EI certification with the ability to obtain a PE license preferred.
• Advanced Microsoft Office Suite knowledge preferred.
• Experience with a programming language (VBA, C#, etc.) preferred.
• Experience with cloud-based platforms (Pro-Core, E-Builder, iAuditor, etc.) preferred.
• Ability to travel out of state up to 50% of the time.
The salary range for applicants in this position generally ranges between $91,000 and $113,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2026-04-19 22:10:55
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
The WTI Field Resources Supervisor (Supervisor) is responsible for the timely delivery of services, profitability, and all employee management and training within their respective region.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Coordinate with the Field Resource Foreman (Foreman) for staffing and scheduling of all WTI Field Resources Reps (Field Reps) in their respective region to ensure proper utilization of manpower on specific jobs for the highest profitability.
Collaborate with other Supervisors as necessary.
Oversee the Quality Control (QC) process in conjunction with the Quality Control Specialist (QCS) of all the Field Reps in the region, which will include random site visits to current and previous job sites and proper documentation to ensure that all work was completed properly and that the customer is fully satisfied.
Ensure profitability within the region by monitoring and managing employee expenses for accuracy and abuse, use of overtime hours, and all full-time personnel's billable time to meet the required percentage.
The Supervisor should stress the profitability factor to all field personnel.
Field all questions and concerns from the Field Reps and handle all discrepancies between the Field Reps and the Sales Reps.
Conduct and foster professional and timely communication (via email, text message, voicemail, or in person) with the customers, Sales Reps, field staff, and internal company personnel on all work-related matters.
Be the primary contact for the office personnel if there are any issues concerning a Field Rep.
Ensure all Field Reps will have a professional appearance and demeanor while completing services for a customer.
Conduct and/or assist with the training (both hands-on field training and classroom setting) for the Field Reps, according to the WTI Training Policy, to include:
Proper completion of all services and related paperwork.
Safety training and training documentation for all Field Reps within the region.
Approval and certification of each Field Rep, including, but not limited to, OSHA Hazard Awareness, Toolbox Talks, etc.
Demonstrate a working knowledge of all services provided.
Manage, monitor, and document the performance of Field Reps and take appropriate steps or corrective measures to resolve employee and work-related issues.
Consult with the Regional Business Manager (RBM) and HR as needed.
Work with the HR and Recruiting department to hire all new personnel.
Ensure all required paperwork is submitted to the corporate office on a timely basis.
Conduct new employee orientation for all new hires, including training on all company policies, administrative processes, procedures, and required technical and safety information.
Handle all administrative matters and corresponding paperwork within the region, including, but not limited to, expense management, monthly sales projections, Field Tech time management, status reports, bidding jobs with Reps, large job sign-offs, project documentation, etc.
Review time reports daily and make necessary corrections with the admin team.
Attend all required calls and meetings.
Perform any other duties and/or projects as required or assigned by the RBM.
CERTIFICATES, LICENSES, REGISTRATIONS:
30-hour OSHA certification (The company will provide it if needed.)
Registered Roof Observer (RRO) is preferred but not required. OTHER SKILLS AND ABILITIES:
Qualifications:
Prior supervisory skills and ability to manage people and tasks.
Prior roofing experience, including patch and repair skills.
Knowledge of Project Management, planning, and scheduling.
Knowledge and experience in monitoring and maintaining quality control.
Functional computer skills.
Safety training and OSHA knowledge.
Understanding of budgeting and expense management.
Competencies:
Adaptable and willing to change with business needs.
Professional and leads by example.
Diversity awareness and ability to adjust to multiple personalities.
Planning and organizational skills.
Able to juggle multiple priorities and demonstrate good task management.
Work independently, solve problems, and delegate assignments, such as quoting and pricing.
Demonstrate a high degree of accountability and ethical behaviors.
Excellent customer service and ability to build relationships.
Other Requirements:
Ability to travel out of town, including overnight stays.
Must have reliable transportation and a valid driver's license.
Ability to work weekends and/or holidays when needed.
Ability to pass a pre-employment drug test.
Ability to read, write, and speak English.
The salary range for applicants in this position generally ranges between $72,000 and $90,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Jacksonville, Florida
Posted: 2026-04-19 22:09:57
-
JOB DESCRIPTION
GENERAL SUMMARY: Performs tasks and maintains logs required in preparation of hazardous waste for disposal.
Under the supervision of the Quality Control Manager, the hazardous waste attendant is responsible for collecting, separating, containing, sealing, weighing, marking, labeling, and preparing waste for transport in accordance with all applicable regulatory requirements.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Empty obsolete lab retains into appropriate collection containers for proper disposal.
Empty obsolete finish goods into appropriate collection containers for proper disposal. Empty collected drums of waste into Kiln Direct box. Must keep accurate logs. Empties, organizes, and keeps clean containers according to applicable regulations. Ensures waste compliance under supervision. Monitors waste collection and capacity; alerts manager to ensure that units are emptied before reaching full capacity. Operates and monitors the distillation units. Inspects and accurately inventories waste staging areas. Must maintain a valid forklift operator's certification. Assist in the on-site transfer of waste to staging areas as necessary. Assists vendors and transporters with waste collection and provides manifests. Maintains waste area in a clean and orderly condition. Always ensures safe working conditions; utilizes safety equipment and/or protective equipment as directed (i.e.
safety gloves and eye protection) and follows defined safety procedures. Maintain Spill Kit and absorbent pad inventories; notifies manager for deficiencies. Assists in the collection of samples that are required. Reports any problems or deviations to the manager immediately. Receive environment and safety training as required. Perform other job duties as assigned. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
Previous manufacturing, quality control and/or forklift experience preferred. High school diploma or equivalent preferred.
Specific Knowledge, Skills, and Abilities Required
Ability to receive and maintain forklift certification.
Ability to understand and provide practicing knowledge of tasks given. Excellent communications skills. Basic machine operation capabilities . Basic math, reading and comprehension skills.
Attention to detail and awareness.
Reasoning Ability: Ability to determine correct procedures in relation to specified guidelines learned during initial training and during any ongoing training.
CERTIFICATES, LICENSES, REGISTRATIONS: Forklift Certification.PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions. While performing the essential functions of this job the employee is required to stand and use hands to grasp, handle or feel.
The employee is required to walk, bend, stoop, and talk or hear.
Employees must regularly lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds using appropriate equipment..
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protective equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Accuracy of hazardous waste disposal and associated logs. Cleanliness, organization, and compliance of area. Movement of waste in a timely manner. Excellent Attendance.
ABOUT US
RPM International Inc.
is a $5.5 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces, to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
The company operates across four reportable segments, including construction products, performance coatings, consumer and specialty products.
It boasts a diverse portfolio with hundreds of brand-name products-many of which are leaders in the markets they serve. Shares of the company's common stock are traded on the New York Stock Exchange under the symbol RPM and are owned by more than 740 institutional investors and 139,000 individuals.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-04-19 22:09:45
-
JOB DESCRIPTION
GENERAL SUMMARY: Performs tasks and maintains logs required in preparation of hazardous waste for disposal.
Under the supervision of the Quality Control Manager, the hazardous waste attendant is responsible for collecting, separating, containing, sealing, weighing, marking, labeling, and preparing waste for transport in accordance with all applicable regulatory requirements.
PRINCIPLE DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Empty obsolete lab retains into appropriate collection containers for proper disposal.
Empty obsolete finish goods into appropriate collection containers for proper disposal. Empty collected drums of waste into Kiln Direct box. Must keep accurate logs. Empties, organizes, and keeps clean containers according to applicable regulations. Ensures waste compliance under supervision. Monitors waste collection and capacity; alerts manager to ensure that units are emptied before reaching full capacity. Operates and monitors the distillation units. Inspects and accurately inventories waste staging areas. Must maintain a valid forklift operator's certification. Assist in the on-site transfer of waste to staging areas as necessary. Assists vendors and transporters with waste collection and provides manifests. Maintains waste area in a clean and orderly condition. Always ensures safe working conditions; utilizes safety equipment and/or protective equipment as directed (i.e.
safety gloves and eye protection) and follows defined safety procedures. Maintain Spill Kit and absorbent pad inventories; notifies manager for deficiencies. Assists in the collection of samples that are required. Reports any problems or deviations to the manager immediately. Receive environment and safety training as required. Perform other job duties as assigned. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education Required
Previous manufacturing, quality control and/or forklift experience preferred. High school diploma or equivalent preferred.
Specific Knowledge, Skills, and Abilities Required
Ability to receive and maintain forklift certification.
Ability to understand and provide practicing knowledge of tasks given. Excellent communications skills. Basic machine operation capabilities . Basic math, reading and comprehension skills.
Attention to detail and awareness.
Reasoning Ability: Ability to determine correct procedures in relation to specified guidelines learned during initial training and during any ongoing training.
CERTIFICATES, LICENSES, REGISTRATIONS: Forklift Certification.PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodation may be made to enable individuals to perform the essential functions. While performing the essential functions of this job the employee is required to stand and use hands to grasp, handle or feel.
The employee is required to walk, bend, stoop, and talk or hear.
Employees must regularly lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds using appropriate equipment..
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protective equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Accuracy of hazardous waste disposal and associated logs. Cleanliness, organization, and compliance of area. Movement of waste in a timely manner. Excellent Attendance.
ABOUT US
RPM International Inc.
is a $5.5 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces, to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world.
The company operates across four reportable segments, including construction products, performance coatings, consumer and specialty products.
It boasts a diverse portfolio with hundreds of brand-name products-many of which are leaders in the markets they serve. Shares of the company's common stock are traded on the New York Stock Exchange under the symbol RPM and are owned by more than 740 institutional investors and 139,000 individuals.Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-04-19 22:09:44
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
The WTI Field Resources Supervisor (Supervisor) is responsible for the timely delivery of services, profitability, and all employee management and training within their respective region.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Coordinate with the Field Resource Foreman (Foreman) for staffing and scheduling of all WTI Field Resources Reps (Field Reps) in their respective region to ensure proper utilization of manpower on specific jobs for the highest profitability.
Collaborate with other Supervisors as necessary.
Oversee the Quality Control (QC) process in conjunction with the Quality Control Specialist (QCS) of all the Field Reps in the region, which will include random site visits to current and previous job sites and proper documentation to ensure that all work was completed properly and that the customer is fully satisfied.
Ensure profitability within the region by monitoring and managing employee expenses for accuracy and abuse, use of overtime hours, and all full-time personnel's billable time to meet the required percentage.
The Supervisor should stress the profitability factor to all field personnel.
Field all questions and concerns from the Field Reps and handle all discrepancies between the Field Reps and the Sales Reps.
Conduct and foster professional and timely communication (via email, text message, voicemail, or in person) with the customers, Sales Reps, field staff, and internal company personnel on all work-related matters.
Be the primary contact for the office personnel if there are any issues concerning a Field Rep.
Ensure all Field Reps will have a professional appearance and demeanor while completing services for a customer.
Conduct and/or assist with the training (both hands-on field training and classroom setting) for the Field Reps, according to the WTI Training Policy, to include:
Proper completion of all services and related paperwork.
Safety training and training documentation for all Field Reps within the region.
Approval and certification of each Field Rep, including, but not limited to, OSHA Hazard Awareness, Toolbox Talks, etc.
Demonstrate a working knowledge of all services provided.
Manage, monitor, and document the performance of Field Reps and take appropriate steps or corrective measures to resolve employee and work-related issues.
Consult with the Regional Business Manager (RBM) and HR as needed.
Work with the HR and Recruiting department to hire all new personnel.
Ensure all required paperwork is submitted to the corporate office on a timely basis.
Conduct new employee orientation for all new hires, including training on all company policies, administrative processes, procedures, and required technical and safety information.
Handle all administrative matters and corresponding paperwork within the region, including, but not limited to, expense management, monthly sales projections, Field Tech time management, status reports, bidding jobs with Reps, large job sign-offs, project documentation, etc.
Review time reports daily and make necessary corrections with the admin team.
Attend all required calls and meetings.
Perform any other duties and/or projects as required or assigned by the RBM.
CERTIFICATES, LICENSES, REGISTRATIONS:
30-hour OSHA certification (The company will provide it if needed.)
Registered Roof Observer (RRO) is preferred but not required. OTHER SKILLS AND ABILITIES:
Qualifications:
Prior supervisory skills and ability to manage people and tasks.
Prior roofing experience, including patch and repair skills.
Knowledge of Project Management, planning, and scheduling.
Knowledge and experience in monitoring and maintaining quality control.
Functional computer skills.
Safety training and OSHA knowledge.
Understanding of budgeting and expense management.
Competencies:
Adaptable and willing to change with business needs.
Professional and leads by example.
Diversity awareness and ability to adjust to multiple personalities.
Planning and organizational skills.
Able to juggle multiple priorities and demonstrate good task management.
Work independently, solve problems, and delegate assignments, such as quoting and pricing.
Demonstrate a high degree of accountability and ethical behaviors.
Excellent customer service and ability to build relationships.
Other Requirements:
Ability to travel out of town, including overnight stays.
Must have reliable transportation and a valid driver's license.
Ability to work weekends and/or holidays when needed.
Ability to pass a pre-employment drug test.
Ability to read, write, and speak English.
The salary range for applicants in this position generally ranges between $72,000 and $90,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Jacksonville, Florida
Posted: 2026-04-19 22:09:28
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
The Design Engineer assesses project requirements, gathers technical field data, determines design requirements, selects appropriate equipment, and provides drafting of HVAC (Heating, Ventilation, and Air Conditioning) restoration projects.
This role combines engineering expertise with drafting skills to ensure that projects are planned and constructed effectively.
Must live in Clearwater, Florida.
Relocation package offered.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
• Conducts on-site visits and assessments to understand the specific scope and technical requirements of individual projects.
This includes evaluating existing HVAC systems, identifying issues or challenges, and testing equipment performance.
• Determines scope and designs solutions for HVAC restoration projects via site visits and coordination with owner/facility staff.
• Understands components and functions of existing mechanical systems being altered or renovated.
• Exercises control over design and production tasks to enable HVAC restoration projects.
• Drafts construction documents and generates specifications for HVAC restoration projects.
• Utilizes in-house estimating tools to create project budgets.
• Assists the sales team with scope reviews and support as needed.
• Creates, maintains, and improves drafting tools and templates.
• Determines the estimated cost of HVAC projects.
This includes calculating costs for labor, materials, equipment, subcontractors, and any other expenses associated with the project.
• Ensures a smooth transition from design to project execution, providing technical guidance and insights during and after construction.
• Other duties as assigned by the manager.
CERTIFICATES, LICENSES, REGISTRATIONS:
• Engineer Intern (EI) Certification
• Professional Engineer (PE) License is preferred
OTHER SKILLS AND ABILITIES:
• Bachelor's degree or equivalent experience.
• 5+ years of industry-specific experience.
• Experience with construction drafting in AutoCAD.
• EI certification with the ability to obtain a PE license preferred.
• Advanced Microsoft Office Suite knowledge preferred.
• Experience with a programming language (VBA, C#, etc.) preferred.
• Experience with cloud-based platforms (Pro-Core, E-Builder, iAuditor, etc.) preferred.
• Ability to travel out of state up to 50% of the time.
The salary range for applicants in this position generally ranges between $91,000 and $113,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2026-04-19 22:09:27
-
JOB DESCRIPTION
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Attend and understand daily onsite safety brief prior to the start of the WTI project.
Inspect and ensure safety of surroundings, equipment and tools and identify and discuss any safety concerns.
Execution of project tasks with knowledge of expected production rates, ensuring tools and materials are used safely and efficiently to complete the assigned project. Complete the project per the scope or work, design and specification of contract & engineering documents as directed by foreman.
Responsible to aid foreman in tracking and monitoring project inventory. Maintains highest quality on-site customer relations in projecting positive image. Has knowledge/understanding and performs work in compliance with all governmental rules and regulations affecting work sites and employees, i.e.
OSHA, DOT, EEO/Affirmative Action, EPA, etc. Provides management with earliest possible notification of real and potential job problems. Accepts responsibility for the care, custody, and use of company equipment, material, tools, and other assets as assigned by the WTI Commercial Foreman. Understands and executes proper material and equipment usage, maintenance, and storage. Perform any other duty and/or project as required or assigned by the WTI Foreman and/or Commercial Business Manager. Maintains ethical business conduct.
Job Requirements:
Masons & Tuckpointers Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Cold Applied Waterproofing Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $21 and $38.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Tampa, Florida
Posted: 2026-04-19 14:08:40
-
JOB DESCRIPTION
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Attend and understand daily onsite safety brief prior to the start of the WTI project.
Inspect and ensure safety of surroundings, equipment and tools and identify and discuss any safety concerns.
Execution of project tasks with knowledge of expected production rates, ensuring tools and materials are used safely and efficiently to complete the assigned project. Complete the project per the scope or work, design and specification of contract & engineering documents as directed by foreman.
Responsible to aid foreman in tracking and monitoring project inventory. Maintains highest quality on-site customer relations in projecting positive image. Has knowledge/understanding and performs work in compliance with all governmental rules and regulations affecting work sites and employees, i.e.
OSHA, DOT, EEO/Affirmative Action, EPA, etc. Provides management with earliest possible notification of real and potential job problems. Accepts responsibility for the care, custody, and use of company equipment, material, tools, and other assets as assigned by the WTI Commercial Foreman. Understands and executes proper material and equipment usage, maintenance, and storage. Perform any other duty and/or project as required or assigned by the WTI Foreman and/or Commercial Business Manager. Maintains ethical business conduct.
Job Requirements:
Masons & Tuckpointers Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Cold Applied Waterproofing Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $21 and $38.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Tampa, Florida
Posted: 2026-04-19 06:08:44
-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and offers constructive criticisms relative to variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Consult with Main Lab chemist on products more than 10% out of product specifications Upon approval of product record data onto Quality Control car and enter information into computer data base Consult QC manual for specific requirements for product analysis of production batches and customers special requirements Calibrate QC equipment as required Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude. Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-04-18 22:11:08
-
JOB DESCRIPTION
BUILD YOUR FUTURE WHILE YOU HELP BUILD A BETTER WORLD!
As North America's largest roofing maintenance service provider, we're obsessed with making good roofs, and good buildings, better.
Restoring instead of replacing wherever we can is the right thing for our customers and our planet, and it's a big part of what makes Tremco Roofing and WTI so unique.
If you're looking for a place to build a career and a life, with great benefits, advancement opportunity, technology, people and a commitment to a sustainable future, you've found it with us.
GENERAL PURPOSE OF THE JOB:
Is responsible for managing all Self-Perform Projects and the associated customers (Including GC and large-scale P&R, TremCare, etc.).
This involves working with the Project Foreman, Superintendent, Construction Manager, and Sales Reps associated with the project, to ensure delivery on time and within budget.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Schedule and manage self-perform crews via daily interaction and oversight of crew foreman.When subcontractors are necessary/present on majority self-perform projects, act as liaison to CM for boots on the ground subcontractor oversight (as needed).
Implement and understand project administration requirements.
Create, update, and communicate project schedules and updates.
Control expectations and challenges to keep project on schedule and running efficiently.
Ensure Quality Control/Quality Management of all scope items.
Verify that all project work complies with contract documents.
Be responsible for resolving project issues and problems, providing coordination between self-perform crews, subcontractors, Sales Reps, and owner operations, affirming specifications are followed in accordance with Tremco standards.
Ensure the profitability of the region by effectively managing the team and processes with the tools available including collaboration with the RBM.
Generate reports on project status and ensure owner satisfaction.
Aid in takeoff of opportunities and creation of scope and quantity specifics for project opportunities, as needed.
Participate in CG/CM, Sales Team, and Ops Management related coordination and collaboration.
Provide QA and QC inspections and training at all levels of work to achieve the highest standards of Tremco/WTI roofing practices so that the Tremco Sales team will increase their market share of performed work to WTI.
These areas include:
Field applications - existing and new materials, systems, applications, etc.
Customer service
Reporting compliance
Communicate on a routine basis with the RBM regarding:
Safety compliance results
Project approvals, planning, and results
Personnel and process management
All issues that require collaboration or elevation of authority
Lead and uphold the highest levels of health and safety management in compliance with all codes, laws, and Tremco policies and contribute to developing a safety-oriented culture that will result in 100% compliance of:
Toolbox Talk attendance
DTA reporting
Truck audits
Goal of zero safety related incidents on all projects JOB REQUIREMENTS:
Willing to travel 100% of the area as needed.
General experience and knowledge with the following:
Concrete Restoration
Caulking
Painting
Tuck Pointing
Brick Replacement
Expansion Joints
Parking Garages
Facades of all types
EIFS
Stucco
Brick
Metal Panels
Coatings of all types for vertical and horizontal surfaces
Valid Driver's license
Ability to pass pre-employment background check, drug test, and physical
The salary range for applicants in this position generally ranges between $74,000 and $92,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2026-04-18 22:10:27
-
JOB DESCRIPTION
BUILD YOUR FUTURE WHILE YOU HELP BUILD A BETTER WORLD!
As North America's largest roofing maintenance service provider, we're obsessed with making good roofs, and good buildings, better.
Restoring instead of replacing wherever we can is the right thing for our customers and our planet, and it's a big part of what makes Tremco Roofing and WTI so unique.
If you're looking for a place to build a career and a life, with great benefits, advancement opportunity, technology, people and a commitment to a sustainable future, you've found it with us.
GENERAL PURPOSE OF THE JOB:
Is responsible for managing all Self-Perform Projects and the associated customers (Including GC and large-scale P&R, TremCare, etc.).
This involves working with the Project Foreman, Superintendent, Construction Manager, and Sales Reps associated with the project, to ensure delivery on time and within budget.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Schedule and manage self-perform crews via daily interaction and oversight of crew foreman.When subcontractors are necessary/present on majority self-perform projects, act as liaison to CM for boots on the ground subcontractor oversight (as needed).
Implement and understand project administration requirements.
Create, update, and communicate project schedules and updates.
Control expectations and challenges to keep project on schedule and running efficiently.
Ensure Quality Control/Quality Management of all scope items.
Verify that all project work complies with contract documents.
Be responsible for resolving project issues and problems, providing coordination between self-perform crews, subcontractors, Sales Reps, and owner operations, affirming specifications are followed in accordance with Tremco standards.
Ensure the profitability of the region by effectively managing the team and processes with the tools available including collaboration with the RBM.
Generate reports on project status and ensure owner satisfaction.
Aid in takeoff of opportunities and creation of scope and quantity specifics for project opportunities, as needed.
Participate in CG/CM, Sales Team, and Ops Management related coordination and collaboration.
Provide QA and QC inspections and training at all levels of work to achieve the highest standards of Tremco/WTI roofing practices so that the Tremco Sales team will increase their market share of performed work to WTI.
These areas include:
Field applications - existing and new materials, systems, applications, etc.
Customer service
Reporting compliance
Communicate on a routine basis with the RBM regarding:
Safety compliance results
Project approvals, planning, and results
Personnel and process management
All issues that require collaboration or elevation of authority
Lead and uphold the highest levels of health and safety management in compliance with all codes, laws, and Tremco policies and contribute to developing a safety-oriented culture that will result in 100% compliance of:
Toolbox Talk attendance
DTA reporting
Truck audits
Goal of zero safety related incidents on all projects JOB REQUIREMENTS:
Willing to travel 100% of the area as needed.
General experience and knowledge with the following:
Concrete Restoration
Caulking
Painting
Tuck Pointing
Brick Replacement
Expansion Joints
Parking Garages
Facades of all types
EIFS
Stucco
Brick
Metal Panels
Coatings of all types for vertical and horizontal surfaces
Valid Driver's license
Ability to pass pre-employment background check, drug test, and physical
The salary range for applicants in this position generally ranges between $72,000 and $90,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Jacksonville, Florida
Posted: 2026-04-18 22:10:22
-
JOB DESCRIPTION
BUILD YOUR FUTURE WHILE YOU HELP BUILD A BETTER WORLD!
As North America's largest roofing maintenance service provider, we're obsessed with making good roofs, and good buildings, better.
Restoring instead of replacing wherever we can is the right thing for our customers and our planet, and it's a big part of what makes Tremco Roofing and WTI so unique.
If you're looking for a place to build a career and a life, with great benefits, advancement opportunity, technology, people and a commitment to a sustainable future, you've found it with us.
GENERAL PURPOSE OF THE JOB:
Is responsible for managing all Self-Perform Projects and the associated customers (Including GC and large-scale P&R, TremCare, etc.).
This involves working with the Project Foreman, Superintendent, Construction Manager, and Sales Reps associated with the project, to ensure delivery on time and within budget.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Schedule and manage self-perform crews via daily interaction and oversight of crew foreman.When subcontractors are necessary/present on majority self-perform projects, act as liaison to CM for boots on the ground subcontractor oversight (as needed).
Implement and understand project administration requirements.
Create, update, and communicate project schedules and updates.
Control expectations and challenges to keep project on schedule and running efficiently.
Ensure Quality Control/Quality Management of all scope items.
Verify that all project work complies with contract documents.
Be responsible for resolving project issues and problems, providing coordination between self-perform crews, subcontractors, Sales Reps, and owner operations, affirming specifications are followed in accordance with Tremco standards.
Ensure the profitability of the region by effectively managing the team and processes with the tools available including collaboration with the RBM.
Generate reports on project status and ensure owner satisfaction.
Aid in takeoff of opportunities and creation of scope and quantity specifics for project opportunities, as needed.
Participate in CG/CM, Sales Team, and Ops Management related coordination and collaboration.
Provide QA and QC inspections and training at all levels of work to achieve the highest standards of Tremco/WTI roofing practices so that the Tremco Sales team will increase their market share of performed work to WTI.
These areas include:
Field applications - existing and new materials, systems, applications, etc.
Customer service
Reporting compliance
Communicate on a routine basis with the RBM regarding:
Safety compliance results
Project approvals, planning, and results
Personnel and process management
All issues that require collaboration or elevation of authority
Lead and uphold the highest levels of health and safety management in compliance with all codes, laws, and Tremco policies and contribute to developing a safety-oriented culture that will result in 100% compliance of:
Toolbox Talk attendance
DTA reporting
Truck audits
Goal of zero safety related incidents on all projects JOB REQUIREMENTS:
Willing to travel 100% of the area as needed.
General experience and knowledge with the following:
Concrete Restoration
Caulking
Painting
Tuck Pointing
Brick Replacement
Expansion Joints
Parking Garages
Facades of all types
EIFS
Stucco
Brick
Metal Panels
Coatings of all types for vertical and horizontal surfaces
Valid Driver's license
Ability to pass pre-employment background check, drug test, and physical
The salary range for applicants in this position generally ranges between $74,000 and $92,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2026-04-18 22:09:46
-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and offers constructive criticisms relative to variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Consult with Main Lab chemist on products more than 10% out of product specifications Upon approval of product record data onto Quality Control car and enter information into computer data base Consult QC manual for specific requirements for product analysis of production batches and customers special requirements Calibrate QC equipment as required Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude. Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-04-18 22:09:42
-
JOB DESCRIPTION
BUILD YOUR FUTURE WHILE YOU HELP BUILD A BETTER WORLD!
As North America's largest roofing maintenance service provider, we're obsessed with making good roofs, and good buildings, better.
Restoring instead of replacing wherever we can is the right thing for our customers and our planet, and it's a big part of what makes Tremco Roofing and WTI so unique.
If you're looking for a place to build a career and a life, with great benefits, advancement opportunity, technology, people and a commitment to a sustainable future, you've found it with us.
GENERAL PURPOSE OF THE JOB:
Is responsible for managing all Self-Perform Projects and the associated customers (Including GC and large-scale P&R, TremCare, etc.).
This involves working with the Project Foreman, Superintendent, Construction Manager, and Sales Reps associated with the project, to ensure delivery on time and within budget.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Schedule and manage self-perform crews via daily interaction and oversight of crew foreman.When subcontractors are necessary/present on majority self-perform projects, act as liaison to CM for boots on the ground subcontractor oversight (as needed).
Implement and understand project administration requirements.
Create, update, and communicate project schedules and updates.
Control expectations and challenges to keep project on schedule and running efficiently.
Ensure Quality Control/Quality Management of all scope items.
Verify that all project work complies with contract documents.
Be responsible for resolving project issues and problems, providing coordination between self-perform crews, subcontractors, Sales Reps, and owner operations, affirming specifications are followed in accordance with Tremco standards.
Ensure the profitability of the region by effectively managing the team and processes with the tools available including collaboration with the RBM.
Generate reports on project status and ensure owner satisfaction.
Aid in takeoff of opportunities and creation of scope and quantity specifics for project opportunities, as needed.
Participate in CG/CM, Sales Team, and Ops Management related coordination and collaboration.
Provide QA and QC inspections and training at all levels of work to achieve the highest standards of Tremco/WTI roofing practices so that the Tremco Sales team will increase their market share of performed work to WTI.
These areas include:
Field applications - existing and new materials, systems, applications, etc.
Customer service
Reporting compliance
Communicate on a routine basis with the RBM regarding:
Safety compliance results
Project approvals, planning, and results
Personnel and process management
All issues that require collaboration or elevation of authority
Lead and uphold the highest levels of health and safety management in compliance with all codes, laws, and Tremco policies and contribute to developing a safety-oriented culture that will result in 100% compliance of:
Toolbox Talk attendance
DTA reporting
Truck audits
Goal of zero safety related incidents on all projects JOB REQUIREMENTS:
Willing to travel 100% of the area as needed.
General experience and knowledge with the following:
Concrete Restoration
Caulking
Painting
Tuck Pointing
Brick Replacement
Expansion Joints
Parking Garages
Facades of all types
EIFS
Stucco
Brick
Metal Panels
Coatings of all types for vertical and horizontal surfaces
Valid Driver's license
Ability to pass pre-employment background check, drug test, and physical
The salary range for applicants in this position generally ranges between $72,000 and $90,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Jacksonville, Florida
Posted: 2026-04-18 22:09:29
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
The Preconstruction Manager will lead the technical and commercial development of projects prior to proposal issuance for Pure Air Controls Services (PACS).
This role sits at the critical intersection of sales, engineering, and estimating, ensuring that every opportunity entering the pipeline is properly vetted, technically sound, and aligned with Pure Air's restoration methodology.
The Preconstruction Manager will serve as the internal gatekeeper for project feasibility, scope development, and budget validation, protecting both the client experience and the integrity of Pure Air's national account relationships.
This position is essential as Pure Air expands its programmatic healthcare and institutional client base, where proposals must meet the expectations of sophisticated facility owners and engineering teams.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Opportunity Evaluation & Pipeline Qualification: Serves as the first technical review of all opportunities generated by Tremco sales representatives and national account teams.
Evaluates incoming opportunities for:
Technical feasibility
Strategic fit
Budget realism
Operational alignment
Determine the appropriate delivery path:
Restoration
Retrofit
Replacement
Decline / reposition opportunity
Scope Development:Develop clear, defensible scopes of work for AHU restoration projects including:
Coil replacement
Fan array retrofits
Interior protective coatings
Structural rehabilitation
Drain pan replacement
Filtration and IAQ improvements.
Work directly with Pure Air's engineering team to ensure scopes reflect best-practice restoration methodology.
Preconstruction Budgeting:Produce conceptual budgets and ROM estimates to guide customer conversations prior to full estimating effort.
Validate project assumptions including:
Access constraints
Phasing requirements
Infection control protocols (healthcare)
Operational impacts
Mechanical system integration.
Estimating Coordination: Serves as the bridge between sales and estimating, ensuring estimators receive:
Fully developed scopes
Complete technical assumptions
Site condition documentation
Appropriate bid strategy.
Prevent incomplete or poorly defined opportunities from entering the estimating queue.
Proposal Risk Management:Reviews all proposals and budget letters prior to client delivery.
Ensure proposals reflect:
Correct scope
Realist budgets
Appropriate exclusions
Constructability
Client & Consultant Engagement - Participate in early-stage client conversations with:
Facility directors
Consulting engineers
Construction managers
National account stakeholders.
Position Pure Air as a technical authority in HVAC restoration.
Programmatic Account Support - Support national account programs including:
Nationwide Private Healthcare Organizations
Nationwide University Research and Laboratory environments
Nationwide Automakers
Financial Services Organizations
Ensure project development aligns with programmatic contracting frameworks.
Continuous Improvement:Develop standardized preconstruction workflows and intake processes.
Implement tools and documentation that improve:
Scope clarity
Proposal accuracy
Estimating efficiency
Client confidence.
QUALIFICATIONS
Mechanical Engineering Degree Preferred
Advanced Microsoft Office Suite knowledge preferred.
Experience with a programming language (VBA, C#, etc.) preferred.
Experience with cloud-based platforms (Pro-Core, E-Builder, iAuditor, etc.) preferred.
Ability to travel out of state up to 50%
The salary range for applicants in this position generally ranges between $90,000 and $113,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Clearwater, Florida
Posted: 2026-04-18 14:09:07
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
The Preconstruction Manager will lead the technical and commercial development of projects prior to proposal issuance for Pure Air Controls Services (PACS).
This role sits at the critical intersection of sales, engineering, and estimating, ensuring that every opportunity entering the pipeline is properly vetted, technically sound, and aligned with Pure Air's restoration methodology.
The Preconstruction Manager will serve as the internal gatekeeper for project feasibility, scope development, and budget validation, protecting both the client experience and the integrity of Pure Air's national account relationships.
This position is essential as Pure Air expands its programmatic healthcare and institutional client base, where proposals must meet the expectations of sophisticated facility owners and engineering teams.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Opportunity Evaluation & Pipeline Qualification: Serves as the first technical review of all opportunities generated by Tremco sales representatives and national account teams.
Evaluates incoming opportunities for:
Technical feasibility
Strategic fit
Budget realism
Operational alignment
Determine the appropriate delivery path:
Restoration
Retrofit
Replacement
Decline / reposition opportunity
Scope Development:Develop clear, defensible scopes of work for AHU restoration projects including:
Coil replacement
Fan array retrofits
Interior protective coatings
Structural rehabilitation
Drain pan replacement
Filtration and IAQ improvements.
Work directly with Pure Air's engineering team to ensure scopes reflect best-practice restoration methodology.
Preconstruction Budgeting:Produce conceptual budgets and ROM estimates to guide customer conversations prior to full estimating effort.
Validate project assumptions including:
Access constraints
Phasing requirements
Infection control protocols (healthcare)
Operational impacts
Mechanical system integration.
Estimating Coordination: Serves as the bridge between sales and estimating, ensuring estimators receive:
Fully developed scopes
Complete technical assumptions
Site condition documentation
Appropriate bid strategy.
Prevent incomplete or poorly defined opportunities from entering the estimating queue.
Proposal Risk Management:Reviews all proposals and budget letters prior to client delivery.
Ensure proposals reflect:
Correct scope
Realist budgets
Appropriate exclusions
Constructability
Client & Consultant Engagement - Participate in early-stage client conversations with:
Facility directors
Consulting engineers
Construction managers
National account stakeholders.
Position Pure Air as a technical authority in HVAC restoration.
Programmatic Account Support - Support national account programs including:
Nationwide Private Healthcare Organizations
Nationwide University Research and Laboratory environments
Nationwide Automakers
Financial Services Organizations
Ensure project development aligns with programmatic contracting frameworks.
Continuous Improvement:Develop standardized preconstruction workflows and intake processes.
Implement tools and documentation that improve:
Scope clarity
Proposal accuracy
Estimating efficiency
Client confidence.
QUALIFICATIONS
Mechanical Engineering Degree Preferred
Advanced Microsoft Office Suite knowledge preferred.
Experience with a programming language (VBA, C#, etc.) preferred.
Experience with cloud-based platforms (Pro-Core, E-Builder, iAuditor, etc.) preferred.
Ability to travel out of state up to 50%
The salary range for applicants in this position generally ranges between $90,000 and $113,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Clearwater, Florida
Posted: 2026-04-18 14:08:43
-
JOB DESCRIPTION
Commercial Roofing Foreman
Benefits:
Base Salary + Annual Bonus Eligible for overtime 401K Health Insurance Paid time-off Company Vehicle
Essential Duties & Responsibilities
Conduct the daily onsite safety brief prior to the start of the WTI project with the Sales Rep, customer and the WTI Crew.
Inspect and ensure all surroundings, equipment and tools and identify and discuss any safety concerns.
Complete the Daily Hazard Analysis form and submit to the Supervisors as applicable Ensure all project communication is completed prior to the start of any WTI project.
This includes but is not limited to communication with: Sales Rep on weekly/daily schedule WTI crew members to discuss scope of work and daily tasks The customer pre-arrival, at arrival and at completion of the day's work WTI Supervisor on schedule changes, project, and crew updates, etc. Efficient project management will include managing crew start and end times and production rates, ensuring tools and materials are available to complete the assigned project safely and efficiently, and completing the project per the scope or work or specification. The WTI Foreman will complete an end of day and/or end of project walk through to ensure quality repairs and address any items prior to leaving the job site.
Before and after pictures will be sent to the Sales Rep and information will be sent daily on project status.
These items will include, detailed work performed updates, materials consumed, and supplies purchases are all recording daily. Ensure that all WTI Field Reps will have a professional appearance and customer interaction while completing services for a customer. The Field Resource Foreman is responsible for the ordering, tracking, and monitoring inventory and ensure Quarterly cycle counts are completed and submitted timely. Per pricing procedures review each field service project over $5,000 for pricing accuracy. Submit all projects over $20,000 to the WTI Supervisor prior to submitting to the Sales Rep or customer. Manage, monitor, and document performance of Field Resource Reps and take appropriate steps or corrective measures to resolve employee and work-related issues.
Consult with WTI Field Resource Supervisor and Human Resources as needed. Perform any other duty and/or project as required or assigned by the WTI Supervisor and/or Regional Manager.
Skills & Qualifications
Minimum five years' experience in the commercial roofing industry. Must be thoroughly familiar with built-up, EPDM, PVC, and other forms of low-slope roofing systems as well as metal and other steep slope roofing systems and how to properly repair them.
The salary range for applicants in this position generally ranges between $53,000 and $65,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: San Francisco, California
Posted: 2026-04-17 14:09:51
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
The Design Engineer assesses project requirements, gathers technical field data, determines design requirements, selects appropriate equipment, and provides drafting of HVAC (Heating, Ventilation, and Air Conditioning) restoration projects.
This role combines engineering expertise with drafting skills to ensure that projects are planned and constructed effectively.
Must live in Clearwater, Florida.
Relocation package offered.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
• Conducts on-site visits and assessments to understand the specific scope and technical requirements of individual projects.
This includes evaluating existing HVAC systems, identifying issues or challenges, and testing equipment performance.
• Determines scope and designs solutions for HVAC restoration projects via site visits and coordination with owner/facility staff.
• Understands components and functions of existing mechanical systems being altered or renovated.
• Exercises control over design and production tasks to enable HVAC restoration projects.
• Drafts construction documents and generates specifications for HVAC restoration projects.
• Utilizes in-house estimating tools to create project budgets.
• Assists the sales team with scope reviews and support as needed.
• Creates, maintains, and improves drafting tools and templates.
• Determines the estimated cost of HVAC projects.
This includes calculating costs for labor, materials, equipment, subcontractors, and any other expenses associated with the project.
• Ensures a smooth transition from design to project execution, providing technical guidance and insights during and after construction.
• Other duties as assigned by the manager.
CERTIFICATES, LICENSES, REGISTRATIONS:
• Engineer Intern (EI) Certification
• Professional Engineer (PE) License is preferred
OTHER SKILLS AND ABILITIES:
• Bachelor's degree or equivalent experience.
• 5+ years of industry-specific experience.
• Experience with construction drafting in AutoCAD.
• EI certification with the ability to obtain a PE license preferred.
• Advanced Microsoft Office Suite knowledge preferred.
• Experience with a programming language (VBA, C#, etc.) preferred.
• Experience with cloud-based platforms (Pro-Core, E-Builder, iAuditor, etc.) preferred.
• Ability to travel out of state up to 50% of the time.
The salary range for applicants in this position generally ranges between $91,000 and $113,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Clearwater, Florida
Posted: 2026-04-17 14:09:33
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB:
The Design Engineer assesses project requirements, gathers technical field data, determines design requirements, selects appropriate equipment, and provides drafting of HVAC (Heating, Ventilation, and Air Conditioning) restoration projects.
This role combines engineering expertise with drafting skills to ensure that projects are planned and constructed effectively.
Must live in Clearwater, Florida.
Relocation package offered.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
• Conducts on-site visits and assessments to understand the specific scope and technical requirements of individual projects.
This includes evaluating existing HVAC systems, identifying issues or challenges, and testing equipment performance.
• Determines scope and designs solutions for HVAC restoration projects via site visits and coordination with owner/facility staff.
• Understands components and functions of existing mechanical systems being altered or renovated.
• Exercises control over design and production tasks to enable HVAC restoration projects.
• Drafts construction documents and generates specifications for HVAC restoration projects.
• Utilizes in-house estimating tools to create project budgets.
• Assists the sales team with scope reviews and support as needed.
• Creates, maintains, and improves drafting tools and templates.
• Determines the estimated cost of HVAC projects.
This includes calculating costs for labor, materials, equipment, subcontractors, and any other expenses associated with the project.
• Ensures a smooth transition from design to project execution, providing technical guidance and insights during and after construction.
• Other duties as assigned by the manager.
CERTIFICATES, LICENSES, REGISTRATIONS:
• Engineer Intern (EI) Certification
• Professional Engineer (PE) License is preferred
OTHER SKILLS AND ABILITIES:
• Bachelor's degree or equivalent experience.
• 5+ years of industry-specific experience.
• Experience with construction drafting in AutoCAD.
• EI certification with the ability to obtain a PE license preferred.
• Advanced Microsoft Office Suite knowledge preferred.
• Experience with a programming language (VBA, C#, etc.) preferred.
• Experience with cloud-based platforms (Pro-Core, E-Builder, iAuditor, etc.) preferred.
• Ability to travel out of state up to 50% of the time.
The salary range for applicants in this position generally ranges between $91,000 and $113,000.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including but not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Clearwater, Florida
Posted: 2026-04-17 14:09:27
-
JOB DESCRIPTION
Why should you work for THIS company?
The question is - WHY WOULDN'T YOU? Embrace YOUR opportunity to maximize tremendous, industry training with LIMITLESS ongoing learning AND earning potential.
Our professional culture and our dedication to every employee-these are just a few benefits we're proud to offer. (Outside Sales - Strategic Account Management - Business Development)
What's in it for YOU?
The Stonhard team knows every job is critical, and that teamwork drives innovation.
Your experience and hard work will be recognized through:
Competitive pay and uncapped earning potential (get paid for your performance) Nationwide, our Territory Managers that completed their first year averaged over $135K with our top rookies earning over $350K.
Second year TMs averaged almost $152K. 401K matching AND a pension plan.
(Stonhard invests in its people) World-class training and a commitment to ongoing career development. Flexibility to work from your home office when not in the field/meeting clients.
What will you do?
A penchant for business development, working out of your own office, you'll meet & engage new and repeat customers in your territory; assessing their needs, you will provide a truly consultative Stonhard solution. Customer sales calls include a mix of existing/repeat business along with prospecting for new customers and projects. Closely work with your manager to meet & exceed sales goals. Participate in overseeing the successful delivery of product installation, ensuring optimum customer satisfaction.
Project management responsibilities include ensuring raw materials are on site, construction crews have everything they need and troubleshooting any installation issues that may come up. Full turn-key operation ensures a smooth install and helps secure next project in another area or building. Will participate in an enriching training process spanning over two years, traveling to our headquarters for pre-planned, scheduled training(s).
Base Salary Range: $60,000 - $80,000
Uncapped Commission potential (First 2 years): approx.
$15,000 - $50,000
Supplemental Pay Types:Commission Pay, Bonus Pay
Benefits:401k w/ company match after 6 months, Pension Plan, Medical/Dental/Vision Insurance, flexible schedule, life insurance, tuition reimbursement
What is required?
Experience in B2B, end user sales; construction, commercial or industrial is preferred. Proven Success in Business Development and Project management; interacting at all levels. Strong capacity to learn a new industry. High degree of initiative, mature judgment, and self-motivation.
CONTACT STONHARD TODAY! Visit us online at www.Stonhard.com or Apply here!
After applying, we encourage you to "follow" us on LinkedIn (Stonhard) as well! This way you can stay informed and up to date on what's happening around our organization and start your path to becoming part of our FAMILY!
STONHARD is headquartered in Maple Shade, NJ and has more than 100 years of experience manufacturing and installing high performance, seamless floor systems throughout the world.
We manufacture and install long-term floor, wall and lining solutions to markets including, but not limited to: food & beverage, general manufacturing, pharmaceutical, chemical processing, education, healthcare, government, technology and hospitality. STONHARD is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's market-leading brands are trusted by consumers and professionals alike to help build a better world. www.stonhard.com We are proud to be an Equal Opportunity/Affirmative Action Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2026-04-16 22:14:48
-
JOB DESCRIPTION
Construction Project Superintendent (Hourly)
Weatherproofing Technologies, Inc.
is seeking Project Superintendents/Project Managers with a proven track record in running and supervising commercial and industrial construction projects to deliver projects on time and within budget.
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Resolving project issues and problems Providing coordination between subcontractors and owner operations Affirming specifications are followed in accordance with Tremco standards Generating reports on project status Ensuring owner satisfaction.
Qualifications and Requirements:
5-10 years' experience in general construction, built-up roofing systems, and/or building envelope is a plus Ability to keep project records Ability to interface with owners, subcontractors, and company management Ability to travel The hourly rate for applicants in this position generally ranges between $20 and $33.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Louisville, Kentucky
Posted: 2026-04-16 22:14:47
