-
We are looking for a skilled PLC Software Engineer.
You will be involved in delivering high-quality engineering services and innovative solutions to water and wastewater clients across the UK.
Key Requirements
Commercial experience in PLC programming (ideally in the water or wastewater industry).
Siemens PLC training or experience.
Site commissioning experience, including testing, troubleshooting, and client support.
Strong understanding of automation and process control systems.
Knowledge of electrical control panels.
Relevant qualifications in Electrical or Electronic Engineering.
Full UK driving licence.
Key Skills
Design, develop, program, and test PLC control systems.
Specify, design, and build PLC software solutions based on client requirements.
Carry out on-site commissioning of control systems.
Provide technical support during installation and handover.
Work closely with internal teams and clients to deliver high-quality engineering outcomes. ....Read more...
Type: Permanent Location: Havant, England
Start: ASAP
Duration: Permanent
Salary / Rate: £48000 - £60000 Per Annum None
Posted: 2026-03-23 13:31:50
-
Electronic Manufacturing Technician required to test, fault find and repair various electrical or electronic systems and components of rotary steerable systems, Measurement While Drilling tools, Specialised Measurement tools and Rechargeable Batteries for Downhole use and power source products.
You will work as part of engineering and quality driven manufacturing teams covering Mechanical manufacturing Technicians and supervisors integrating and testing electrical and electromechanical tools.
You will also be responsible for maintaining and repairing the test equipment used to test tools.
Experience
Electronic technician experience of testing, low and high voltage experience, basic soldering, crimping, and assembly.
Basic fault finding and rectification at system and component level.
Further education in Electrical or Electronic engineering (ONC, HNC, HND, NVQ Level 2)
Working within design constraints.
Multi-meter, Oscilloscope, Low Voltage Power Supplies, High Voltage Power Supply (up to 400VDC) to make measurements on and for test and debugging of electromechanical assemblies
Responsibilities
Producing deliverable items from full drawing packs with minimal additional help to relevant IPC standards.
....Read more...
Type: Permanent Location: Stroud, England
Start: ASAP
Duration: Permanent
Salary / Rate: £30000 - £35000 Per Annum None
Posted: 2026-03-23 13:31:46
-
PLC Software Engineer required to join a growing team delivering exceptional water and wastewater client services and innovative solutions.
Key skills
PLC Programming commercial experience ideally within water or wastewater industry.
Electrical control panel knowledge.
Electrical or Electronic Engineering qualifications and experience in system software engineering.
Automation and Process Control Equipment understanding.
Driving licence.
Role
PLC Software Engineering.
Design, develop, program and testing PLC systems.
Specify, design and build programs. ....Read more...
Type: Permanent Location: Snodland, England
Start: ASAP
Duration: Permanent
Salary / Rate: £38000 - £52000 Per Annum None
Posted: 2026-03-23 13:31:42
-
You'll be responsible for creating and refining a variety of motor control and power distribution panels according to client requirements.
Our client operates across multiple fields including design, engineering, and construction, with a focus on power and environmental sectors.
Responsibilities
Interpret clients' requirements during project design phase
Prepare detailed electrical designs and general arrangement drawings for motor control and power distribution panels
Ensure compliance with relevant specifications, standards, and safety regulations throughout project development
Maintain and update electronic files using document management software
Qualifications and Skills
Electrical engineering qualification preferred, though candidates with relevant design experience in switchgear, automation, and electrical control systems will be equally considered
Possession of a UK Driver???s License, access to personal transportation, and willingness to travel within the UK and Ireland
Familiarity with various electrical design software packages
Minimum of 5 years of electrical experience
Experience in designing electrical control systems
Proficiency in EPlan and AutoCAD
Previous experience in the water industry is advantageous ....Read more...
Type: Permanent Location: Cookstown, Northern Ireland
Start: ASAP
Duration: Permanent
Salary / Rate: £38000 - £48000 Per Annum None
Posted: 2026-03-23 13:25:54
-
A fantastic job opportunity has arisen for a Manufacturing Engineering Manager in East Sussex.
My client is a global centre of excellence, specialising in the design and manufacture of electronic controllers, instrumentation, and drives.
The role as the Manufacturing Engineering Manager in East Sussex will be leading the NPI Development team and will be responsible for liaising with the relevant design staff to ensure the overall quality and delivery of new parts, to the highest standards.
You will also work to ensure the proposed design concepts can be manufactured cost-effectively.
You will oversee the prototype build of products in question, prepare relevant documentation and actively participate in PFMEAs (Process Failure Mode Effects Analysis) and DFMEs (Design Failure Mode and Effect Analysis).
This role will also require you to work with Operations personnel to allow for the optimisation and layout of the assembly areas, as well as the assembly tooling used in the NPI build.
The Manufacturing Engineering Manager must have experience with PCBA and leading a manufacturing or production team.
As Manufacturing Engineering Manager in East Sussex, you will have experience in a New Product Introduction (NPI) and New Product Development (NPD) role within electronics assembly, and/or PCB/cable assembly or electronics box build as well as experienced in the use of ERP/MRP systems (SAP Preferable).
You will also have an Engineering Degree or equivalent and provable experience in a similar position.
Awareness of all types of electronic printed circuit assembly techniques is beneficial.
My client are a Market Leader who combine over 30 years of experience within the Electronic engineering with the attitude and opportunity of a start-up company.
APPLY NOW for the Manufacturing Engineering Manager East Sussex job, or to apply for similar jobs, by sending your CV to rwilcocks@redlinegroup.Com, otherwise, we always welcome the opportunity to discuss other production jobs on 01582 878 810 or 079317 88834. ....Read more...
Type: Permanent Location: East Sussex, England
Start: ASAP
Salary / Rate: £40000 - £70000 per annum
Posted: 2026-03-23 00:00:04
-
Senior Validation Engineer
An exciting opportunity has arisen for a Senior Validation Engineer in Newcastle upon Tyne to join a highly visible, cross-functional engineering team supporting new product development and product continuation.
This role is ideal for an engineer with experience in validation, verification, and compliance testing of power electronic systems, looking to work on cutting-edge technologies such as motor drives, SMPS, and DC-DC converters.
About the Role in Newcastle
As a Senior Validation Engineer, you will be responsible for ensuring that newly developed electronic products meet all regulatory and compliance standards, including CE marking and UL certification.
You will work closely with hardware, software, mechanical, and systems engineering teams, as well as project and quality management, to deliver robust, compliant products.
This role combines hands-on engineering work (test setup, debugging, building test rigs) with technical documentation and planning, making it ideal for someone who enjoys both practical and analytical work.
Key Responsibilities
Develop and execute Validation & Verification (V&V) test plans for new products
Define and document test procedures, criteria, and compliance requirements
Perform testing on power electronic systems (motor drives, SMPS, DC-DC converters)
Set up and configure test environments, equipment, wiring, and loads
Conduct EMC, electrical safety, vibration, and IP rating testing
Analyse results and determine pass/fail compliance status
Support certification processes including CE Marking, UL, and regulatory approvals
Troubleshoot and debug electronic circuits, PCB assemblies, and systems
Collaborate with cross-functional teams to resolve issues and improve designs
Liaise with external test laboratories and certification bodies
Produce detailed test reports, traceability documentation, and compliance records
Identify and manage technical risks and support product release decisions
Support continuous improvement of validation processes and test coverage
Skills & Experience Required
Proven experience in a Validation, Test, or QA Engineering role
Hands-on experience with power electronics systems
Strong understanding of EMC, electrical safety, and regulatory compliance testing
Experience working with high-voltage DC systems (200V-800V) (desirable)
Knowledge of switching power converters and circuit analysis
Experience with design of experiments and structured testing methods
Familiarity with ESD/EMC principles and best practices
Strong troubleshooting and debugging skills
Excellent organisational and documentation skills
Ability to work independently and manage multiple priorities
Qualifications
Bachelor's degree in Engineering (ideally Power Electronics or Electrical Engineering)
Provable experience in system-level validation or test engineering
Knowledge of quality standards such as ISO 9001, TS16949, or ISO 26262
Familiarity with regulatory standards such as:
EN1175
EN13849
UL 583
EN12895
Key Competencies
Strong analytical and problem-solving ability
Excellent communication (written and verbal)
Proactive and self-driven approach
Attention to detail and quality-focused mindset
Ability to work in a cross-functional engineering environment
Awareness of health & safety best practices
Why Join This Engineering Team in Newcastle?
Work on cutting-edge power electronics and advanced engineering systems
Be part of a highly collaborative and visible engineering function
Gain exposure to global regulatory standards and certification processes
Combine hands-on lab work with technical leadership and strategy
Opportunities for career development and progression
If you are keen and would like to find out more information on this Senior verification Engineer opportunity in Newcastle, please send over an updated cv to nking@redlinegroup.Com or call 01582 878839 for more details. ....Read more...
Type: Permanent Location: Newcastle upon Tyne, England
Start: ASAP
Salary / Rate: £35000 - £55000 per annum
Posted: 2026-03-20 16:48:28
-
An established, technology-driven engineering organisation operating in the advanced imaging and detection sector is seeking a highly capable Technical Engineering Manager.
This Egham based business designs and manufactures precision electronic and optoelectronic systems used within high-performance, regulated, and safety-critical environments.
With continued investment in innovation and product development, this role offers the opportunity to shape technical strategy and engineering excellence at a senior level.
This is a strategic leadership position responsible for overseeing the full lifecycle of complex electronic product development — from early-stage concept and architecture through to production, certification, and in-service support.
You will lead a multidisciplinary engineering function, drive the technology roadmap, and ensure delivery of innovative products aligned to commercial, operational, and customer objectives
Key responsibilities for the Technical Engineering Manager role, based in Egham:
Engineering Strategy & Leadership
Lead, mentor, and develop a high-performing engineering team
Define and execute the engineering roadmap aligned to business strategy
Ensure high-quality product delivery within agreed timescales and cost targets
Establish and monitor KPIs to measure performance and drive continuous improvement
New Product Development (NPD)
Oversee complex NPD programmes across hardware, firmware, and software
Provide system-level architectural direction and high-level technical oversight
Ensure product designs meet regulatory, quality, and manufacturability standards
Drive efficiency, sustainability, and best practice within development processes
Technical Authority
Provide leadership across advanced electronic and sensor-based technologies including:
Maintain accountability for technical risk, system reliability, and product performance
Balance innovation with practical delivery and commercial impact
Commercial & Cross-Functional Collaboration
Support technical feasibility assessments and customer-facing activities
Work closely with sales, manufacturing, purchasing, and executive leadership
Ensure effective communication of technical strategy to both technical and non-technical stakeholders
Product Lifecycle & Compliance
Oversee lifecycle management including obsolescence planning and upgrades
Ensure compliance with ISO quality standards and engineering governance
Support manufacturing readiness, certification activities, and production optimisation
Drive high-quality technical support for fielded products
Key skills required for the Technical Engineering Manager role in Egham:
Essential
Degree in Electrical/Electronic Engineering, Physics, or related discipline
Significant experience leading engineering teams in technology-led organisations
Strong technical background in electronics and analogue system design
Proven track record delivering complex engineering programmes
Strong communication, decision-making, and stakeholder engagement skills
Desirable
Experience in advanced imaging, sensing, or detection technologies
Knowledge of optoelectronic systems and integrated sensor platforms
Exposure to ASIC development and mixed-signal system design
Experience operating in regulated or high-reliability environments
The Technical Engineering Manager plays a pivotal role in shaping the impact and long-term strategic growth of by directly influencing technology direction, innovation capability, operational performance, and commercial competitiveness.
APPLY NOW! To apply for the Technical Engineering Manager role based in Surrey, please send your CV to mbelmar@redlinegroup.Com, or for more information contact Mike Belmar on 01582 878807 ....Read more...
Type: Permanent Location: Surrey, England
Start: ASAP
Salary / Rate: £90000 - £115000 per annum
Posted: 2026-03-20 16:40:15
-
Senior Mechanical Design Engineer - SolidWorks / Sheet Metal Design
Redline has been retained by a global leader in critical power and power generation solutions who are seeking a Senior Mechanical Design Engineer to join their expanding R&D team, based on site in Burton on Trent.
Due to continued growth and increasing demand, our Burton on Trent based client is looking for a Senior Mechanical Design Engineer to design, develop, and optimise sheet metal enclosures and mechanical components for advanced power generation systems.
Responsibilities for this Senior Mechanical Design Engineer role:
Design and model sheet metal enclosures, brackets, panels and housings for power generation equipment using SolidWorks.
Create detailed 2D and 3D drawings for manufacturing, assembly and quality inspection purposes.
Select materials, fasteners and manufacturing methods to ensure structural integrity, thermal performance and cost efficiency.
Work closely with electrical and software engineers to integrate mechanical and electronic components.
Develop and maintain CAD libraries, templates and design standards for consistency across projects.
Key skills and experience required for this Senior Mechanical Design Engineer role:
Strong professional experience designing sheet metal enclosures for industrial or power generation equipment.
Control Systems or Shipping containers would be good too.
Proficiency in SolidWorks, including sheet metal modelling, assemblies and drawing creation.
Understanding of mechanical design principles, tolerances, fasteners and materials selection.
Experience with DFMA, thermal analysis, stress analysis and prototyping.
This is an exciting opportunity to join a forward-thinking company offering strong career progression and the chance to work for a global leader in critical power solutions.
To apply for this Senior Mechanical Design Engineer - SolidWorks / Sheet Metal Design (on-site in Burton on Trent) position, please send your CV to ndrain@redlinegroup.Com ....Read more...
Type: Permanent Location: Staffordshire, England
Start: ASAP
Salary / Rate: £45000 - £60000 per annum
Posted: 2026-03-20 16:04:09
-
An opportunity has arisen for a Senior Electronics Engineer to join an innovative and future thinking business based in Berkshire.
The successful Berkshire based Senior Electronics Engineer will work with a market-leading design team focused on developing innovative and robust electronic products.
The role involves leading projects from initial concept through to final production, including schematic design, PCB layout, prototyping, testing, and customer support as products scale to volume production.
Key Responsibilities:
Lead electronic product development projects from concept to production.
Design innovative electronics and embedded firmware solutions.
Conduct automated and manual testing for electronics and software.
Act as the lead architect for assigned projects, collaborating with other engineers where needed.
Manufacture and test embedded components and harnesses for prototypes.
Participate in formal design reviews and follow an agile development methodology.
Ensure accurate documentation and maintain up-to-date project tracking (Jira, Atlassian).
Conduct EMC testing and compliance evaluations for various industry standards.
Skills and Experience:
A relevant degree or HNC/HND in Electronic Engineering, or significant proven experience in electronic product development.
Extensive industry experience in electronics design and embedded systems development.
Expertise in Altium Designer for schematic capture and PCB layout.
Ability to design and integrate digital and industrial communication buses such as SPI, I2C, UART, Ethernet, CANbus/LINbus.
Experience with task tracking tools like Jira and version control applications like Bitbucket.
Familiarity with EMC testing and certification requirements for automotive, aerospace, or medical applications is an advantage.
Experience in miniaturisation and high-density electronic designs.
APPLY NOW for the Senior Electronics Engineer position based in, Berkshire, by sending your CV and cover letter to bwiles@redlinegroup.Com or call Ben on 01582 878826 / 07471 181784. ....Read more...
Type: Permanent Location: Berkshire, England
Start: ASAP
Salary / Rate: £50000 - £75000 per annum
Posted: 2026-03-20 15:54:44
-
An exciting opportunity has arisen for a Senior Electronics Engineer to join a Cambourne, Cambridgeshire based market-leading manufacturer of specialist fire detection systems.
Their innovative products are trusted globally in high-stakes environments such as museums, warehouses, theatres, and even commercial aviation.
As a Senior Electronics Design Engineer, you will play a pivotal role in leading and mentoring a team of talented engineers.
You'll bring technical expertise, strategic insight, and a passion for delivering exceptional electronic designs that make a tangible difference in the real world.
Key Responsibilities of this Cambourne, Cambridgeshire based Senior Electronics Design Engineer job:
Lead the design and development of complex analogue and digital electronic circuits, including schematic capture, component selection, and design reviews.
Provide hands-on technical leadership throughout the entire electronics product lifecycle — from concept, feasibility, and design, through to prototyping, testing, certification (including ATEX), and production handover.
Ensure robust designs suitable for high-reliability and safety-critical applications, including high-risk and ATEX-certified environments.
Plan, manage, and oversee project delivery, ensuring alignment with technical and commercial objectives.
Skills & Experience Required for this Senior Electronics Design Engineer job:
Proven experience in analogue and digital circuit design, including schematic capture and verification using tools like Altium 365
Strong senior-level background with project ownership, team leadership, and mentoring responsibilities.
Industry experience with regulated or high-risk products ideally including ATEX or other safety-critical standards
Degree-qualified in Electronics, Electrical Engineering, or a closely related discipline
This is a fantastic opportunity to join a forward-thinking Cambourne, Cambridgeshire based business that values innovation, continuous improvement, and the development of its people—all while delivering life-saving technology.
If this could be of interest, send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878816 / 07471 181784. ....Read more...
Type: Permanent Location: Cambourne, England
Start: ASAP
Salary / Rate: £60000 - £70000 per annum
Posted: 2026-03-20 15:53:20
-
We are hiring a Principal Software Engineer (Embedded Systems) based in Normanton, West Yorkshire to lead the design and development of cutting-edge embedded software for next-generation products.
This is a senior-level opportunity for an experienced Normanton based Principal Software Engineer with deep expertise in C programming, RTOS (Real-Time Operating Systems), and wireless communication protocols.
Reporting to the Group Technical Engineering Director, you will play a key role in shaping system architecture, driving technical excellence, and delivering high-performance, reliable embedded solutions.
Key Responsibilities
Design and develop embedded software for ARM-based microprocessors using RTOS (Zephyr, FreeRTOS, or similar)
Implement and optimise wireless communication protocols such as Bluetooth, Wi-Fi, Zigbee
Collaborate with hardware engineers and cross-functional teams to define system architecture and requirements
Write, debug, and maintain high-quality C code following best practices (e.G.
MISRA guidelines)
Develop scalable and maintainable embedded solutions for IoT and connected devices
Support web-based interfaces using JavaScript and HTML where required
Contribute to Linux-based application development for testing and simulation
Maintain clear technical documentation across design, testing, and troubleshooting
Stay up to date with emerging trends in embedded systems, IoT, and software engineering
Required Skills & Experience
Strong experience in C programming for embedded systems
Hands-on experience with RTOS (Zephyr, FreeRTOS, or similar)
Knowledge of wireless communication technologies (Bluetooth, Wi-Fi, Zigbee)
Experience with Linux OS application development
Familiarity with Git, embedded IDEs, and development tools
Understanding of secure software development, encryption, and secure protocols
Exposure to JavaScript and HTML for UI or web integration
Proven ability to lead engineering teams, manage workloads, and deliver projects
Strong problem-solving and analytical skills
Desirable Experience
Background in IoT, consumer electronics, or embedded product development
Experience with ARM-based microcontrollers and hardware integration
Knowledge of C#, web applications, or cloud-connected embedded systems
Education
Bachelor's degree in Computer Science, Electronic Engineering, or a related field (or equivalent experience)
Extensive' experience in embedded software engineering
Key Competencies
Technical Leadership - Deep expertise in embedded systems and software design
Project Planning & Delivery - Ability to prioritise, delegate, and meet deadlines
Collaboration & Communication - Strong cross-functional teamwork skills
Adaptability - Thrives in fast-paced, evolving technical environments
Innovation - Drives continuous improvement and creative problem-solving
Accountability - Takes ownership and delivers high-quality results
Why Apply?
Work on next-generation embedded and IoT technologies
Play a lead role in engineering innovation and product development
Join a collaborative, forward-thinking engineering team in West Yorkshire
Competitive salary and long-term career growth opportunities
Apply Now
If you're a passionate Principal Software Engineer in Normanton, West Yorkshire looking to work on advanced RTOS, C programming, and wireless systems, we'd love to hear from you.
Please send over an updated cv to nking@redlinegroup.Com or call 01582 878839. ....Read more...
Type: Permanent Location: Normanton, England
Start: ASAP
Salary / Rate: £35000 - £55000 per annum
Posted: 2026-03-20 15:00:36
-
Senior Electronics Design Engineer - Consumer Electronics
I am currently recruiting on behalf of a world-renowned consumer electronics company that has been designing and manufacturing high-volume products supplied to households across the globe for many years.
Based in Amsterdam, the company is looking to appoint its first Netherlands-based Electronics Specialist, joining an established international engineering team.
This role will involve the design of analogue and digital circuitry, hands-on prototyping, validation and verification, close collaboration with engineering teams based in Asia, and the technical leadership of complex, high-volume projects.
Key skills and experience required for this Senior Electronics Design Engineer role:
Senior-level experience in mixed-signal analogue and digital circuit design
Experience working within a small engineering team in a consumer electronics environment (ideally a start-up or scale-up)
Strong background in prototyping, validation and verification of electronic products
Proven experience leading high-volume product development projects
Ability to relocate to, or be based full-time in, Amsterdam
To apply for this Senior Electronics Design Engineer position based in Amsterdam, Netherlands, please send your CV to NDrain@redlinegroup.Com Or call +44 (0)1582 878828 to speak with Nick. ....Read more...
Type: Permanent Location: Amsterdam, Netherlands
Start: ASAP
Salary / Rate: £45000 - £80000 per annum
Posted: 2026-03-20 13:45:57
-
Electronics Design Engineer (Analogue, Power Electronics, SMPS)
Normanton, West Yorkshire, United Kingdom | Full-Time, Permanent |
About the Role
We are seeking a highly skilled Principal Electronics Design Engineer to join a growing engineering team in Normanton, West Yorkshire.
This is an exciting opportunity for an experienced Electronics Design Engineer with expertise in analogue electronics, power systems, and switch-mode power supplies (SMPS), to play a leading role in delivering innovative electronic solutions.
Reporting to the Normanton Site Technical Lead, you will provide technical leadership, mentor engineers, and drive the development of advanced systems across power electronics, LED lighting, and embedded control technologies.
Key Responsibilities
Lead the design and development of analogue electronics, power systems, and SMPS (buck, boost, flyback)
Design and optimise LED lighting control systems and power management solutions
Provide technical leadership and mentorship to a team of electronics engineers
Oversee integration of control systems, HMI, and embedded electronics into products
Collaborate with cross-functional teams across hardware, software, and systems engineering
Troubleshoot complex issues related to power conversion, EMC, and thermal performance
Ensure designs meet regulatory standards, safety requirements, and customer specifications
Create and review technical documentation including schematics, PCB layouts, and test procedures
Drive continuous improvement and engineering best practices
Research and evaluate emerging electronic technologies and innovations
Key Skills & Experience
Extensive experience in analogue electronics and power electronics design
Strong expertise in switch-mode power supplies (SMPS) and power conversion circuits
Broad knowledge of electronic circuit design and system-level integration
Experience leading and mentoring engineering teams
Proficiency with design and simulation tools such as SPICE, MATLAB, Altium Designer
Solid understanding of EMC compliance, thermal management, and safety standards
Strong hands-on problem-solving and troubleshooting skills
Excellent communication, leadership, and stakeholder engagement abilities
Desirable Experience
Experience with LED lighting systems and control electronics
Knowledge of embedded systems and mixed-signal design
Exposure to HMI (Human Machine Interface) development
Experience in product development within regulated industries
If you are keen and would like to find out more information on this Electronics Design Engineer position, please send an updated cv over to nking@redlinegroup.Com or call 01582 878839 for more details. ....Read more...
Type: Permanent Location: Normanton, England
Start: ASAP
Salary / Rate: £35000 - £50000 per annum
Posted: 2026-03-20 13:44:50
-
The Test Engineer will join a Systems Engineering team critical in space thruster engine development.
You will work on a complex, multifaceted rocket engine system comprised of numerous newly developed and integrated components.
This role has wide ranging technical input including structural, thermal, rocket propulsion, space electronics, software, testing and systems analysis.
In essence as a Senior Systems Engineer, you will coordinate and bring together the diverse sub components and sub assembles into a complete working space engine design.
My client supplies chemical propulsion rocket engines and thrusters serve to key spacecraft manufacturers for commercial, defence and scientific applications.
Requirements
Space systems experience ideally of large European space projects, system primes or ESA.
Technical leadership of large, multidisciplinary Electrical Harnessing Design, routing and schematic Mechanical and fluidic system Engineering projects.
System Analysis knowledge to apply to, fluidic systems, surge pressure and pressure drop.
Performance, Structural, Thermal, Reliability, Radiation Assessment, Hazard or Safety Analysis.
Complex product development experience of thermal design and equipment selection using Failure Modes Effects and Criticality Analysis (FMECA).
Intelligent, logical approach to problem solving.
Degree, Masters or higher qualification in Engineering, Aerospace, Mechanical or Electrical Engineering.
You will own the overall engine system architecture, analysis and documentation including FMECAs, radiation, reliability, mechanical, thermal, fluidic, electromagnetic, Design, Development and Verification Plan, Design Justification Document, Software Requirements Specification, Engine Test Plan etc.
Working closely with the Project Manager to help plan and organise resources.
Responsibilities
Support propulsion engine build, assembly and test development including route card build sequences and system assembly, integration, Manufacturing and Inspection Flow Charts.
Review, interpret, manage and own the spacecraft requirements then disseminate down to relevant engine subsystem or component teams.
Coordinate of top level Design, Verification and Compliance Matrix.
Internally digest key subsystem and component review documentation ensuring work is completed to required standards and all aspects of the engine system are correctly aligned.
Lead customer interactions and engine level reviews also manage supplier technical queries in conjunction with the appropriate resource. ....Read more...
Type: Permanent Location: Aylesbury, England
Start: ASAP
Duration: Permanent
Salary / Rate: £38000 - £45000 Per Annum None
Posted: 2026-03-20 13:32:00
-
An Engineering Project Manager is required to join a leading design and manufacture of high tolerance electronic instrumentation products.
The Engineering Project Manager job is based in Berkshire.
This Berkshire based Engineering Project Manager will be responsible for, but not limited to:
Overseeing the design and development, testing, implementation, and production of bespoke products to meet client requirements.
Liaising with all colleagues and project teams to ensure control over product development processes.
Leading full product life cycle development of ruggedised electronic systems.
The Engineering Project Manager will come from a development background working on bespoke enclosures for Aerospace environments, where they will be subject to high levels of temperature and vibration.
In addition, candidates must be a UK citizen, with Security Clearance (or be able to gain Security Clearance) and have a valid UK driving licence.
APPLY NOW for this Berkshire based Engineering Project Manager by sending your CV to Rwilcocks@RedlineGroup.Com or call Ricky on 01582 878810. ....Read more...
Type: Permanent Location: Newbury, England
Start: ASAP
Salary / Rate: £35000 - £55000 per annum
Posted: 2026-03-20 00:00:02
-
Sales Manager - RF & Microwave Technology
Location: Germany - Remote
An opportunity has arisen for a Sales Manager - RF & Microwave Technology to join a specialist engineering organisation developing and manufacturing high-frequency RF and microwave components and subsystems for a wide range of industrial, scientific and communications applications.
The organisation forms part of an international RF technology group and specialises in the design, development and manufacture of high-performance RF assemblies operating at frequencies up to 50 GHz.
Its product portfolio includes power amplifiers, low-noise amplifiers, microwave generators and frequency conversion systems used across communications, broadcast, medical, scientific and advanced industrial applications.
With in-house R&D, testing laboratories and manufacturing capability, the business supports the full product lifecycle from concept and prototyping through to low and medium volume production.
The organisation has an established global customer base and works closely with engineering-led customers on customised, design-led solutions.
This role is focused on developing new business and managing key customer relationships across Germany and wider European markets, combining technical sales, consultative engagement and strategic account development.
This position is suited to a technically strong sales professional with experience in RF, microwave or electronic component sales, who can translate complex engineering capability into commercial success.
Main Responsibilities of the Sales Manager - RF & Microwave Technology (Germany - Remote):
Identify, develop and secure new business opportunities across RF and microwave markets
Build and manage a strong sales pipeline across Germany and wider European territories
Provide technical consultation to customers, supporting projects from initial specification through to design-in and delivery
Develop long-term relationships with engineering teams, R&D departments and procurement stakeholders
Act as a trusted advisor, positioning high-frequency technology solutions to meet customer requirements
Represent the organisation at international trade shows and industry events
Monitor market trends, competitor activity and emerging application areas
Provide market feedback to internal engineering and product development teams
Collaborate closely with internal engineering teams to support technical proposals and customer requirements
Requirements of the Sales Manager - RF & Microwave Technology (Germany - Remote):
Degree in Electrical Engineering, Communications Engineering, Industrial Engineering or similar technical discipline
Experience in technical sales of electronic components or engineered technology solutions
Strong understanding of RF, microwave or high-frequency technology (advantageous)
Proven ability to win new business and manage complex technical sales cycles
Strong consultative sales approach with the ability to support design-in opportunities
Excellent communication, negotiation and presentation skills
Self-motivated and structured, with the ability to work autonomously in a field-based role
Fluent in German and English
Working Pattern & Benefits:
Fully remote role based in Germany
Travel across Germany and Europe for customer meetings and industry events
High degree of autonomy to develop and grow a sales territory
Opportunity to join a technically advanced organisation within a global engineering group
Strong internal engineering support for complex technical customer engagements
To apply for this Sales Manager - RF & Microwave Technology role, please send your CV to Kishan Chandarana:
Kchandarana@redlinegroup.Com
01582 878 830
....Read more...
Type: Permanent Location: Germany
Start: ASAP
Salary / Rate: €70000 - €90000 per annum
Posted: 2026-03-18 14:17:07
-
JOB DESCRIPTION
Legend Brands, an industry leader and long-standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
This position will work at the Arlington, WA location.
Job Summary
Under general supervision, the Drafter I responsible for working with design engineers to produce drawings from sketches, existing drawings, and electronic images.
Utilize CAD tools to create and maintain individual part and assembly drawings.
Support the change control process, complete engineering change orders and update engineering and manufacturing databases.
Supervision Responsibility:
None
Essential Duties
• Work closely with other departments to ensure drawings convey the correct information and are error free.
• Ensure product documentation of drawings, revisions, engineering change requests, and engineering change orders are accurate and complete.
• Respond to production and/or process problems through Engineering Change Requests (ECR) and by conferring with the engineers.
• Support new product development by creating part and assembly drawings under the direction of the product designer.
• Provide Bills of Materials (BOM) for new product or improvements to existing products and maintain BOMs in material planning computer system (MRP 9000).
• Create Engineering Change Requests and Engineering Change Orders (ECO) for communicating and recording new products and product changes.
• Prepare miscellaneous diagrams, charts and drawings to document engineering processes and standards.
• Prepare miscellaneous diagrams, charts and drawings from various sources to support other departments such as Service and Marketing.
• Maintain an orderly workspace in a multi-tasking environment.
• Maintain revision-controlled drawings and models in a PDM vault.
• Communicate with QA, Vendors, Buyers, Inventory and Manufacturing regarding new and revised drawings.
• Performs other related duties as assigned.
Drafter I
This level requires knowledge and competent demonstration of the following within 6 (six) months of hire: • Basic creation of part model and assemblies.
Follow the QC drawing and the drawing release process.
• Understanding of CAD filing system on the main network, PDM, and in SharePoint • Process ECR's and ECO's • Work within a team environment
Minimum Qualifications
The requirements listed below are representative of the education, experience, certification and/or licensure required.
An equivalent combination of education and experience to perform the essential duties and meet the necessary employment standards may be considered.
Education and Experience • High school diploma or equivalent required.
• Minimum of 1-2 years related work experience required.
Employment Standards
• Knowledge of SolidWorks • Knowledge of reading drawings • Skilled in SolidWorks • Skilled in Microsoft office and excel • Ability to Organize and work to priorities • Ability to process drawing revision on part level CAD files • Ability to pass a pre-employment background check.
Hiring Range Between $31.00/hr.
- $34.75/hr.
Benefits
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, leaves of absence, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations • Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
• Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's.
• All job offers are contingent upon satisfactory pre-employment drug test and background screening.Apply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2026-03-18 14:08:28
-
JOB DESCRIPTION
Legend Brands, an industry leader and long-standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
This position will work at the Arlington, WA location.
Job Summary
Under general supervision, the Drafter I responsible for working with design engineers to produce drawings from sketches, existing drawings, and electronic images.
Utilize CAD tools to create and maintain individual part and assembly drawings.
Support the change control process, complete engineering change orders and update engineering and manufacturing databases.
Supervision Responsibility:
None
Essential Duties
• Work closely with other departments to ensure drawings convey the correct information and are error free.
• Ensure product documentation of drawings, revisions, engineering change requests, and engineering change orders are accurate and complete.
• Respond to production and/or process problems through Engineering Change Requests (ECR) and by conferring with the engineers.
• Support new product development by creating part and assembly drawings under the direction of the product designer.
• Provide Bills of Materials (BOM) for new product or improvements to existing products and maintain BOMs in material planning computer system (MRP 9000).
• Create Engineering Change Requests and Engineering Change Orders (ECO) for communicating and recording new products and product changes.
• Prepare miscellaneous diagrams, charts and drawings to document engineering processes and standards.
• Prepare miscellaneous diagrams, charts and drawings from various sources to support other departments such as Service and Marketing.
• Maintain an orderly workspace in a multi-tasking environment.
• Maintain revision-controlled drawings and models in a PDM vault.
• Communicate with QA, Vendors, Buyers, Inventory and Manufacturing regarding new and revised drawings.
• Performs other related duties as assigned.
Drafter I
This level requires knowledge and competent demonstration of the following within 6 (six) months of hire: • Basic creation of part model and assemblies.
Follow the QC drawing and the drawing release process.
• Understanding of CAD filing system on the main network, PDM, and in SharePoint • Process ECR's and ECO's • Work within a team environment
Minimum Qualifications
The requirements listed below are representative of the education, experience, certification and/or licensure required.
An equivalent combination of education and experience to perform the essential duties and meet the necessary employment standards may be considered.
Education and Experience • High school diploma or equivalent required.
• Minimum of 1-2 years related work experience required.
Employment Standards
• Knowledge of SolidWorks • Knowledge of reading drawings • Skilled in SolidWorks • Skilled in Microsoft office and excel • Ability to Organize and work to priorities • Ability to process drawing revision on part level CAD files • Ability to pass a pre-employment background check.
Hiring Range Between $31.00/hr.
- $34.75/hr.
Benefits
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, leaves of absence, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations • Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
• Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's.
• All job offers are contingent upon satisfactory pre-employment drug test and background screening.Apply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2026-03-18 14:08:16
-
Power Electronics Engineer — Medium Power (100 W-10 kW)
Clevedon, Somerset
Our client is seeking an experienced Power Electronics Engineer to join their engineering team, contributing to the design and development of advanced medium-power electronic systems.
This role offers hands-on involvement across the full product lifecycle, working on power conversion, control electronics, and embedded systems typically in the 100 W-10 kW range.
You will work closely with multidisciplinary teams to deliver robust, production-ready designs for modern electrical and industrial applications.
Key Responsibilities:
Design and develop medium-power electronics (100 W-10 kW) including:
Power conversion stages
Analog and digital control circuitry
Signal conditioning and feedback systems
Produce high-quality schematic designs, component selection, and multi-layer PCB layouts.
Perform simulation, prototyping, debugging, and verification testing.
Support new product introduction from concept through production.
Collaborate with test, manufacturing, and service teams to ensure reliable and manufacturable designs.
Contribute to continuous improvement of design processes and product performance.
Ensure compliance with ISO9001, ISO14001, EMC requirements, and relevant safety standards.
Qualifications & Experience
Degree in Power Electronics, Electronics Engineering, Embedded Systems, or equivalent.
Strong background in hardware and power electronics design, including: Analog and digital circuit design, Power supply and converter design, High-quality PCB layout (OrCad preferred)
You can be experienced from 1 year all the way through to Senior level.
This position offers a rare balance between hands-on power electronics design, analog engineering, and real-world medium-power systems, making it ideal for engineers who enjoy working across both control electronics and power hardware.
Please send your CV to ndrain@redlinegroup.Com Or call 01582878828 to speak with Nick Drain for more information. ....Read more...
Type: Permanent Location: Clevedon, England
Start: ASAP
Salary / Rate: £45000 - £65000 per annum
Posted: 2026-03-18 09:22:06
-
Electronic Design Engineer required to work on detailed hardware design, building test equipment for research and device deployment.
This is a hands on technical leadership role, suiting a Seinor or Pricipal Enigneer with international standards test and compliance process management knowledge.
Requirements
Schematic CAD experience taking designs through to production.
Experience of designing analogue front ends, ESD protection and for EMC
Experience with board bring up and debugging
Electronics Engineering degree or equivalent and commercial design experience.
Embedded C microcontrollers
Altium
PCB layout
RF and high-speed data busses ....Read more...
Type: Permanent Location: Central London, England
Start: ASAP
Duration: Permanent
Salary / Rate: £66000 - £82000 Per Annum None
Posted: 2026-03-17 16:39:38
-
Calibration Engineer required to test, calibrate and adjust a wide range of metrological test and measurement equipment on site and external customer premises
Skills
Electrical or Electronic qualification or relevant experience.
Experience within the instrumentation industry.
Mathematical knowledge.
Quality standards.
Responsibilities
Provide detailed calibration certificates.
Understand equipment specifications and test techniques
Obtain and maintain a library of product specifications.
Calibrate multi parameter test equipment.
Provide certificate details when calibration is complete.
Synchronise data within designated timescales.
Keeping thorough record of calibration procedures and results. ....Read more...
Type: Permanent Location: Peterlee, England
Start: ASAP
Duration: Permanent
Salary / Rate: £32000 - £48000 Per Annum None
Posted: 2026-03-17 12:45:29
-
Managing Director - RF & Antenna Technology Manufacturing
Location: Maine, USA
An opportunity has arisen for a Managing Director - RF & Antenna Technology Manufacturing to lead the US operations of a specialist engineering manufacturer developing RF antenna feeds and antenna system components used across communications infrastructure, satellite communications and defence applications.
The organisation is part of an international engineering group with multiple global sites.
The US operation functions as a specialist manufacturing and engineering facility focused on the design, development and production of custom RF antenna feed systems and waveguide transmission components used within larger communications and antenna platforms.
The business operates with a lean engineering and manufacturing team, generating multi-million-dollar annual revenues.
It specialises in highly engineered, low-volume RF products, taking projects from customer requirements through RF design and development to precision machining, assembly and RF performance testing.
Products are custom designed and built to order, used within communications systems where RF signals are transmitted through waveguides and emitted via antenna feeds into larger antenna or satellite dish systems.
This role forms part of a planned leadership succession following a successful business transformation.
The incoming Managing Director will maintain operational performance while supporting the next phase of growth, including expanding US-based manufacturing capability to support programmes requiring domestic production.
The position suits an experienced technical leader comfortable operating hands-on within a small engineering-led organisation, bringing strong commercial, operational and leadership capability.
Main Responsibilities of the Managing Director - RF & Antenna Technology Manufacturing (Maine, USA):
Lead the overall performance and strategic direction of the US business
Take full P&L responsibility, ensuring financial stability and sustainable growth
Manage engineering, operations, sales and finance functions within a lean organisation
Oversee manufacturing activities including machining, assembly and RF testing
Maintain and develop key customer relationships across communications, defence and infrastructure markets
Support business development activities and strategic growth initiatives
Expand US engineering and manufacturing capability to support future programmes
Ensure compliance with relevant regulatory and corporate governance requirements
Drive operational improvements and organisational performance
Work closely with international leadership teams to align the US business with global strategy
Provide structured reporting on financial performance, operational delivery and strategic objectives
Requirements of the Managing Director - RF & Antenna Technology Manufacturing (Maine, USA):
Engineering degree is essential
Proven senior leadership experience within an engineering or manufacturing organisation
Strong P&L leadership experience and commercial management capability
Experience managing engineering, manufacturing or operational teams
Ability to operate effectively within small, technically focused organisations
Strong leadership, communication and stakeholder management skills
Strategic mindset combined with hands-on operational capability
Desirable Experience:
Background in RF engineering, antenna systems or microwave technology
Experience within defence electronics, telecommunications infrastructure or satellite communications sectors
Exposure to international engineering organisations or multi-site operations
Working Pattern & Benefits:
Full-time on-site leadership role based in Maine, USA
Approximately 25-30% travel, primarily across the United States to customer locations
Opportunity to lead a specialist engineering and manufacturing organisation
High-autonomy leadership role with responsibility for a complete business unit
Exposure to international operations and senior group leadership
To apply for this Managing Director - RF & Antenna Technology Manufacturing role, please send your CV to Kishan Chandarana:
Kchandarana@redlinegroup.Com
01582 878 830 ....Read more...
Type: Permanent Location: Maine, USA
Start: ASAP
Posted: 2026-03-16 16:55:29
-
An urgent job as a Mechanical Engineer has arisen in Great Yarmouth, Norfolk for a company that offers a 9 day working fortnight!
An exciting new job has arisen for a Mechanical Engineer, based in Great Yarmouth, Norfolk to design, develop, and optimise precision jigs, fixtures, and tooling to support the manufacturing of microelectronic components.
The ideal Mechanical Engineer, based in Great Yarmouth, Norfolk will have;
Produce high quality conceptual and detailed designs for jigs, fixtures, nests, alignment systems, and handling tools.
Use SolidWorks and Creo for 3D modelling, assemblies, simulations, and fully defined engineering drawings.
Proficiency in SolidWorks, Creo or similar, with the ability to create detailed drawings and manufacturing packs.
This is for a company that specialise in the design and manufacture of secure communication devices for predominately the defence and aerospace sectors.
They offer a range of excellent benefits from a 9 day working fortnight, hybrid working, flexitime as well as assisting with relocation costs of up to £8,000.
APPLY NOW! For the Mechanical Engineer job located in Great Yarmouth, Norfolk by sending a cover letter and CV to TDrew@redlinegroup.Com or by calling Tom Drew on 01582 878848 quoting ref.
THD1364.
Alternatively, if this job is not suitable but you are looking for a job within Engineering, please call 01582 878 848 for a confidential discussion. ....Read more...
Type: Permanent Location: Great Yarmouth, England
Start: ASAP
Salary / Rate: £45000 - £47000 per annum
Posted: 2026-03-15 00:00:04
-
Junior PCB Layout Engineer - Glasgow (Hybrid)
Our client, a precision engineering company specialising in high-end audio equipment, is seeking a Junior PCB Layout Engineer to join their Glasgow-based team.
This is a fantastic opportunity for a graduate or junior engineer with a passion for PCB design and electronics.
Key responsibilities for the Junior PCB Layout Engineer position:
PCB design and layout for audio products
Support schematic capture and library management
Assist with testing, prototyping, and project work
Work closely with R&D, design, and manufacturing teams
About the Junior PCB Layout Engineer
Interest in PCB layout and electronic design
Degree in Electronics or related discipline preferred
Strong communication and willingness to learn
Some experience with PCB design tools desirable (training provided)
Apply now to join a growing Glasgow based team with real progression opportunities in PCB design and precision engineering.
Please send an updated cv over to nking@redlinegroup.Com or call 01582 878839.
....Read more...
Type: Permanent Location: Glasgow, Scotland
Start: ASAP
Salary / Rate: £30000 - £40000 per annum
Posted: 2026-03-13 16:43:38
-
My client, a globally recognised audio manufacturer based in Glasgow, is seeking a highly skilled Electronics Design Engineer with strong analogue expertise.
This is an exceptional opportunity to work on cutting-edge, low-noise electronics for some of the best music systems in the world.
This position is ideal for an engineer who thrives in both analogue and digital domains.
You will design, test, and refine complex mixed-signal circuitry used in premium audio systems where noise performance, signal integrity, and precision are critical.
You'll work on-site within a technically exceptional R&D team dedicated to pushing the boundaries of high-end audio design.
Based in Glasgow, this company is internationally renowned for producing some of the highest-performing audio systems in existence.
Their engineering is rooted in deep analogue expertise, innovative mixed-signal design, and meticulous craftsmanship.
This is a rare chance to contribute to world-class products with a company that values long-term employee development.
Essential Requirements (must haves) for the Electronics Design Engineer:
Excellent understanding of analogue circuit principles (op-amps, filters, noise optimisation, precision signal paths).
This will be technically tested.
Practical experience in FPGA design using VHDL or Verilog.
Ties to Glasgow or Scotland - they seek engineers committed to a long-term future with the company.
Already eligible to work in the UK - no visa sponsorship or overseas relocation.
On-site role - all-remote working is not available.
Genuine enthusiasm for audio electronics and precision design (not just being a musician).
Key Responsibilities for the Electronics Design Engineer:
Design, simulate, and test mixed-signal circuits for high-end audio devices
Develop analogue front-ends with extremely low noise and distortion
Work on data conversion stages, DSP pathways, and FPGA-based control
Generate schematics, work closely on PCB layout optimisation, and validate prototypes
Collaborate with hardware, software, and acoustic engineering teams
Ensure designs meet the company's world-class audio performance standards
Interested? Apply Today!
If you're a Electronics Design Engineer with strong analogue knowledge, send your updated CV to Nicola at Nking@redlinegroup.Com Or contact Nicola directly on 01582 878839/ 07961 158788.
Take the next step in your career and help shape the future of world-class audio engineering. ....Read more...
Type: Permanent Location: Glasgow, Scotland
Start: ASAP
Salary / Rate: £35000 - £55000 per annum
Posted: 2026-03-13 16:43:02
