-
Technician required with electrical assembly experience and IPC certification.
Ker skills
Soldering, crimping and general wiring skills.
Ability to apply basic arithmetic operations, compute ratio and rate, percentage, fractions and ratios, and calculate weights and measures, including Imperial to Metric conversions.
Electronics precision engineering workmanship practices.
Role will be to perform all Electronic Assembler duties under zero supervision.
Following routings and records test measurements on PC based systems.
....Read more...
Type: Permanent Location: Stroud, England
Start: ASAP
Duration: Permanent
Salary / Rate: £25000 - £28000 Per Annum None
Posted: 2025-12-12 09:48:30
-
Test technician with good all round precision engineering mechanical, electronic and simulation test validation and verification experience required to join a comprehensive in house test facility.
Component, product, mechanical and electronic / electrical testing, assembly & disassembly experience ideally with test equipment maintenance, calibration, environmental screening, modification, troubleshooting and repair skills will be put to great use in this role.
Role requirements
Electrical and/or mechanical apprenticeship ideally with ONC/HNC or other engineering qualifications.
Mechanical fitting or electrical experience.
Supporting design and development design teams with mechanical and electrical test fixtures.
Diagnosis and fault finding.
Mechanical assembly / electrical systems.
Understanding of engineering drawings, schematics and flow charts.
An eye of irregularities in data (e.g.
over temperatures, over pressures). ....Read more...
Type: Permanent Location: Gloucester, England
Start: ASAP
Duration: Permanent
Salary / Rate: £32000 - £44000 Per Annum None
Posted: 2025-12-12 09:37:38
-
Electronic Instrument Test technician with good all round precision engineering electronic data acquisition, test validation and verification experience required to join a comprehensive in house test facility.
Component and product, instrumentation, electronic / electrical testing experience ideally in a very practical precision design environment.
Key skills
Data acquisition system build and administration to experiment, collect data and calculate results.
Set up, configure data acquisitions system software, example NI DAQ, NI LabVIEW, DASYLab.
Instrumentation use including:
Pressure sensors
Accelerometers
Flow meters
Loadcells
Thermocouples.
Cable layout and installation route cabling
Soldering skills at connector and PCB level
Digital multi meter (DMM) and oscilloscope knowledge.
Environmental testing.
Inverters, 3 phase motors and programmable Logic controller knowledge.
....Read more...
Type: Permanent Location: Gloucester, England
Start: ASAP
Duration: Permanent
Salary / Rate: £26000 - £42000 Per Annum None
Posted: 2025-12-12 09:36:36
-
Technician ideally with hands-on equipment assembly experience required to assemble equipment and conduct quality assurance checks.
A familiarity with electronics or mechanical tool usage is highly desirable.
Key skills
Experience with mechanical tools and understanding of engineering drawings
Electronics knowledge
Responsibilities
Soldering
SMT/SMD
CAD programs
Quality Management practices
Microsoft Access and databases
Type: Permanent Location: Sheffield, England
Start: ASAP
Duration: Permanent
Salary / Rate: £26000 - £42000 Per Annum None
Posted: 2025-12-11 10:27:55
-
We are looking for a skilled Manufacturing Technician to join our growing production team, supporting the build of equipment used in cutting-edge marine and subsea environments.
This is a hands-on role ideal for someone with strong electronics assembly and wiring experience.
Key Responsibilities
Operate micro CNC machinery for precision component production
Solder PCBs and electronic circuitry to a high standard
Build and assemble wiring looms and cable harnesses
Follow manufacturing procedures, technical drawings, and circuit diagrams
Carry out PAT testing and quality inspections on circuitry and cables
Ensure all products meet strict quality and safety standards
Key Skills
Proven experience in electronic assembly or manufacturing
Strong PCB soldering and wiring skills
Ability to read and interpret circuit diagrams and engineering drawings
Experience with micro CNC machines (desirable)
High attention to detail and commitment to quality ....Read more...
Type: Permanent Location: Barrow-in-Furness, England
Start: ASAP
Duration: Temp-to-Perm
Salary / Rate: £30000 - £42000 Per Annum None
Posted: 2025-12-10 10:35:41
-
An Engineering Test Technician is sought to join an innovative engineering team in Essex, contributing to the testing, validation, and continuous improvement of new and legacy electronic products.
The Engineering Test Technician, Essex, will be expected to develop their understanding in the field, learning from peers and senior engineers in technical areas and industry best practices.
This may include applying core electronic engineering knowledge, understanding testing processes, production methods, and working closely with suppliers and internal teams.
Responsibilities include:
Work with engineering and cross-functional departments to define and support product test requirements.
Create and execute detailed test procedures for new and legacy products, using equipment such as oscilloscopes, DMMs, power supplies (including HV), and network analysers.
Develop automated test scripts using C++ in Visual Studio to improve test efficiency.
Debug, fault-find, and validate products down to component level, including soldering connectors, cables, and replacing faulty or missing components.
Collaborate with senior engineers during larger technical projects and investigations.
Maintain comprehensive test documentation, including test reports, calibration records, and organised test data.
Support the production and wider engineering teams by resolving issues discovered during testing.
Key skills & experience:
BTEC Level 3 / A-Levels in an engineering discipline, ideally with strong electronics content, or equivalent industry experience.
Proficiency using electronic test equipment such as oscilloscopes, network analysers, DMMs, ATE systems, and power supplies.
Practical experience with fault-finding, soldering, and hands-on electronic investigations.
Ability to write C++ code in Visual Studio to automate test routines.
Strong understanding of electronic principles and UKAS-level calibration requirements.
Effective communication, problem-solving ability, and adaptability in a fast-paced engineering environment.
How to apply:
Apply now for the Engineering Test Technician role in Essex.
Send your CV to Adighton@redlinegroup.Com or call Adam on 07961158768. ....Read more...
Type: Permanent Location: Essex, England
Start: ASAP
Salary / Rate: £25000 - £28000 per annum
Posted: 2025-12-05 15:33:12
-
JOB DESCRIPTION
Typical tasks for this position include (but are not limited to) the following: Monitor product quality to ensure compliance to standards and specifications. Develop an understanding with supervision of the fundamentals of coatings technology. Compile results of tests and analyses. Set up and conduct experiments, tests, and analyses using standard paint test procedures and physical and chemical techniques. Conduct chemical and physical laboratory tests to assist scientists in making qualitative and quantitative analyses of solids, liquids, and gaseous materials, and document all experimental results. Provide and maintain a safe work environment by participating in safety programs, committees, or teams, and by conducting laboratory and plant safety audits. Prepare paint batches for products and following standardized formulas or create experimental formulas. Preform lab support activities which may include routine maintenance or upkeep of equipment and lab areas such as salt fogs, QUV'S, milling room, hot room, or controlled temp.
& humidity cabinet.
Responsibilities/Expectations:
Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person. Maintain a good record of attendance and punctuality. Learn all manual tasks performed within the department. Perform tasks assigned using specific operating procedures and following department specific quality control processes and procedures. Treat people with dignity and respect. Conduct all business with integrity. Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities. Follow all safety procedures and company policies.
QUALIFICATIONS:
KNOWLEDGE
Chemistry - Knowledge of the chemical composition, structure, and properties of substances and of the chemical processes and transformations that they undergo.
This includes uses of chemicals and their interactions, danger signs, production techniques, and disposal methods. English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar. Computers and Electronics - Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming. Mathematics - Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications. Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance. Engineering and Technology - Knowledge of the practical application of engineering science and technology.
This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services. Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. High school graduate or equivalent (GED) with a focus in the sciences, with chemistry and related sciences preferred.
Skills
Science - Using scientific rules and methods to solve problems. Reading Comprehension - Understanding written sentences and paragraphs in work related documents. Quality Control Analysis - Conducting tests and inspections of products, services, or processes to evaluate quality or performance. Mathematics - Using mathematics to solve problems. Operation Monitoring - Watching gauges, dials, or other indicators to make sure a machine is working properly. Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times. Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. Time Management - Managing one's own time and the time of others. Writing - Communicating effectively in writing as appropriate for the needs of the audience. Active Learning - Understanding the implications of new information for both current and future problem-solving and decision-making. From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class. Job Type: Full-time Shift: Monday - Thursday 4:00PM - 2:30AM Friday: 2-3 hours on non-mandatory Fridays Pay: $23 - $26 with a second shift premium of $0.75 Work Location: In personApply for this ad Online! ....Read more...
Type: Permanent Location: Brooklyn Park, Minnesota
Posted: 2025-12-04 22:08:41
-
JOB DESCRIPTION
Typical tasks for this position include (but are not limited to) the following: Monitor product quality to ensure compliance to standards and specifications. Develop an understanding with supervision of the fundamentals of coatings technology. Compile results of tests and analyses. Set up and conduct experiments, tests, and analyses using standard paint test procedures and physical and chemical techniques. Conduct chemical and physical laboratory tests to assist scientists in making qualitative and quantitative analyses of solids, liquids, and gaseous materials, and document all experimental results. Provide and maintain a safe work environment by participating in safety programs, committees, or teams, and by conducting laboratory and plant safety audits. Prepare paint batches for products and following standardized formulas or create experimental formulas. Preform lab support activities which may include routine maintenance or upkeep of equipment and lab areas such as salt fogs, QUV'S, milling room, hot room, or controlled temp.
& humidity cabinet.
Responsibilities/Expectations:
Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person. Maintain a good record of attendance and punctuality. Learn all manual tasks performed within the department. Perform tasks assigned using specific operating procedures and following department specific quality control processes and procedures. Treat people with dignity and respect. Conduct all business with integrity. Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities. Follow all safety procedures and company policies.
QUALIFICATIONS:
KNOWLEDGE
Chemistry - Knowledge of the chemical composition, structure, and properties of substances and of the chemical processes and transformations that they undergo.
This includes uses of chemicals and their interactions, danger signs, production techniques, and disposal methods. English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar. Computers and Electronics - Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming. Mathematics - Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications. Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance. Engineering and Technology - Knowledge of the practical application of engineering science and technology.
This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services. Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. High school graduate or equivalent (GED) with a focus in the sciences, with chemistry and related sciences preferred.
Skills
Science - Using scientific rules and methods to solve problems. Reading Comprehension - Understanding written sentences and paragraphs in work related documents. Quality Control Analysis - Conducting tests and inspections of products, services, or processes to evaluate quality or performance. Mathematics - Using mathematics to solve problems. Operation Monitoring - Watching gauges, dials, or other indicators to make sure a machine is working properly. Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times. Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. Time Management - Managing one's own time and the time of others. Writing - Communicating effectively in writing as appropriate for the needs of the audience. Active Learning - Understanding the implications of new information for both current and future problem-solving and decision-making. From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class. Job Type: Full-time Shift: Monday - Thursday 4:00PM - 2:30AM Friday: 2-3 hours on non-mandatory Fridays Pay: $23 - $26 with a second shift premium of $0.75 Work Location: In personApply for this ad Online! ....Read more...
Type: Permanent Location: Brooklyn Park, Minnesota
Posted: 2025-12-04 22:08:37
-
Test Engineer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: PCB, Testing, Electronics
Our Client:Is a pioneering family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We are seeking a skilled Test Engineer to join our client's team, who is responsible for developing test requirements, creating test instructions, and testing PCBs, assemblies, and systems.
The ideal candidate will have a strong background in electronics and measurement technology, with practical experience in handling measuring equipment and a good understanding of radio frequency and power engineering.
Main Responsabilities:
Development of test requirements and new test methods in collaboration with the development department
Creation of test instructions and test reports
Testing, repairing (requires e.g.
soldering skills) and commissioning of PCB's, assemblies and systems as well as participation in tests in the test field
Checking production orders and goods receipt material according to quality characteristics
Perform factory inspections with customers
Management of measuring equipment storage
Construction of test facilities for the rationalization of test procedures
Required Competencies:
Completed technical training in the direction of electronics/measurement technology, technician school, an advantage
Practical experience in handling measuring equipment
Knowledge of radio frequency and power engineering is an advantage
Excellent knowledge of German and English
Positive attitude to work
Reliable team player with a pronounced quality awareness
Enjoy working independently
Benefits:
Competitive salary and benefits package - Up to CHF 110k
Opportunity to work on exciting and challenging projects
Collaborative and dynamic work environment
Professional development and training opportunities
Comprehensive benefits package, including health insurance, retirement plan, and more
Flexible working hours and remote work options
30 Days Annual Leave
Location: Aargau, Baden, SwitzerlandSalary: CHF 80-110k + Bonus Benefits
Tech Stack: PCB, Testing & Electronics
Applicants for the Test Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/TESARG80110 ....Read more...
Type: Permanent Location: Baden, Switzerland
Start: ASAP
Salary / Rate: Swiss Franc80000 - Swiss Franc110000 per annum
Posted: 2025-12-03 01:06:33
-
Trainee Field Service EngineerDartford£27,000 to £28,000 Basic + (OTE £35,000) + Bonus + Door to door + Van + Personal use + Fuel card + Full Training + Stability + Lunch allowance + Pension + Holiday + Job satisfaction + Immediate start + StabilityJoin a market leader in a stable industry as a Trainee Field Service Engineer where you will have full on the job training to do your job to the best of your ability and have everyday job satisfaction in a varied role.
Enjoy working a local patch, working as part of a team in a supportive environment, whilst benefitting from a great package!The company manufactures, distributes, maintains and services high quality fuel pumps and forecourt equipment.
Due to an increase in demand, they are looking for a Trainee Field Service Engineer to join the team and help contribute to the consistent workload.
Your Role As Trainee Field Service Engineer Will Include:
* Full training
* Service and repairs of petrol pumps
* Trainee field service role covering the Dartford areaAs A Trainee Field Service Engineer You Will Need To Have:
* Mechanical / Electronic Engineering background (ANY Considered)
* Full driving licence
* Ability to commute around the Dartford area and surrounding areasPlease apply or contact Rebecka on 07458163046 for immediate consideration Keywords: Trainee, Trainee Field Service Engineer, Trainee engineer, trainee technician, Field Service Engineer, Field service, Mechanic, Mechanical, Electrical, Electromechanical,Datrford,Bexley,Welling,Belvedere,Sidcup,Northfleet,Gravesend,Greenhithe,Swanley,Longield,Hartley,PurfleetThis vacancy is being advertised by Future Engineering Recruitment Ltd.
The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.
Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted ....Read more...
Type: Permanent Location: Dartford, England
Start: ASAP
Duration: perm
Salary / Rate: £27000 - £28000 per annum + Training + Stability + Work life balance
Posted: 2025-12-02 16:38:46
-
Trainee Field Service EngineerCrawley
£27,000 to £28,000 Basic + (OTE £35,000) + Bonus + Door to door + Van + Personal use + Fuel card + Full Training + Stability + Lunch allowance + Pension + Holiday + Job satisfaction + Immediate start + StabilityJoin a market leader in a stable industry as a Trainee Field Service Engineer where you will have full on the job training to do your job to the best of your ability and have everyday job satisfaction in a varied role.
Enjoy working a local patch, working as part of a team in a supportive environment, whilst benefitting from a great package!The company manufactures, distributes, maintains and services high quality fuel pumps and forecourt equipment.
Due to an increase in demand, they are looking for a Trainee Field Service Engineer to join the team and help contribute to the consistent workload.
Your Role As Trainee Field Service Engineer Will Include:
* Full training
* Service and repairs of petrol pumps
* Trainee field service role covering the Crawley area
As A Trainee Field Service Engineer You Will Need To Have:
* Mechanical / Electronic Engineering background (ANY Considered)
* Full driving licence
* Ability to commute around the Crawley area and surrounding areas
Please apply or contact Rebecka on 07458163046 for immediate consideration
Keywords: Trainee, Trainee Field Service Engineer, Trainee engineer, trainee technician, Field Service Engineer, Field service, Mechanic, Mechanical, Electrical, Electromechanical,Crawley,Redhill,Horley,Lingfield,Horesham,Brighton,Charl wood, burgess hill,Smallfield,East Grinstead,Copthrone,Salfords,Forest Row
This vacancy is being advertised by Future Engineering Recruitment Ltd.
The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.
Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted. ....Read more...
Type: Permanent Location: Crawley, England
Start: ASAP
Duration: perm
Salary / Rate: £27000 - £28000 per annum + Training + Stability + Work life balance
Posted: 2025-12-02 16:05:18
-
Trainee Field Service EngineerMaidstone£27,000 to £28,000 Basic + (OTE £35,000) + Bonus + Door to door + Van + Personal use + Fuel card + Full Training + Stability + Lunch allowance + Pension + Holiday + Job satisfaction + Immediate start + StabilityJoin a market leader in a stable industry as a Trainee Field Service Engineer where you will have full on the job training to do your job to the best of your ability and have everyday job satisfaction in a varied role.
Enjoy working a local patch, working as part of a team in a supportive environment, whilst benefitting from a great package!The company manufactures, distributes, maintains and services high quality fuel pumps and forecourt equipment.
Due to an increase in demand, they are looking for a Trainee Field Service Engineer to join the team and help contribute to the consistent workload.
Your Role As Trainee Field Service Engineer Will Include:
* Full training
* Service and repairs of petrol pumps
* Trainee field service role covering the Maidstone areaAs A Trainee Field Service Engineer You Will Need To Have:
* Mechanical / Electronic Engineering background (ANY Considered)
* Full driving licence
* Ability to commute around the Maidstone area and surrounding areasPlease apply or contact Rebecka on 07458163046 for immediate consideration Keywords: Trainee, Trainee Field Service Engineer, Trainee engineer, trainee technician, Field Service Engineer, Field service, Mechanic, Mechanical, Electrical, Electromechanical,Datrford,Bexley,Welling,Belvedere,Sidcup,Northfleet,Gravesend,Greenhithe,Swanley,Longield,Hartley,Purfleet,MaidstoneThis vacancy is being advertised by Future Engineering Recruitment Ltd.
The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.
Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted ....Read more...
Type: Permanent Location: Maidstone, England
Start: ASAP
Duration: perm
Salary / Rate: £27000 - £28000 per annum + Training + Stability + Work life balance
Posted: 2025-12-02 15:54:19
-
An exciting opportunity for an experienced SMT Technician, Bedford, Bedfordshire is available to lead a high-performing team within a fast-paced electronics manufacturing environment.
The SMT Technician, Bedford, Bedfordshire role is responsible for the manufacturing and assembly of Printed Circuit Boards (PCBs) and assemble product to agreed quality levels to meet customer expectations.
The Key Responsibilities for the SMT Technician, based in Bedford include;
Set-up and run SMT lines to specified efficiency and process quality levels
Ensure product meets IPC 610 to the specified class
The successful candidate for the SMT Technician, Bedford, Bedfordshire will have a proven background in;
Experience of running pick and place machines, X-ray and reflow ovens
Creating DEK, SPI, Jet printer programs
Previous experience in working from circuit and Engineering drawings
APPLY NOW for the SMT Technician, Bedford, Bedfordshire, by sending your CV to TDrew@redlinegroup.Com quoting ref.
THD1345.
Otherwise, we always welcome the opportunity to discuss other roles similar to Production related jobs on 01582 878 848 or 07961158762.
....Read more...
Type: Permanent Location: Bedfordshire, England
Start: ASAP
Posted: 2025-11-29 00:00:03
-
Electronics Test Engineer - Durham, UK
Full-Time | Permanent | Competitive Salary
Are you an experienced Electronics Test Engineer with strong LabVIEW programming skills? Our client, a leading manufacturer of rechargeable battery solutions based in Durham, is looking for a proactive and innovative engineer to join their Engineering team.
This position is ideal for someone who wants to take ownership of LabVIEW-driven automated test development and play a key role in the testing and validation of cutting-edge battery technology.
About the Role
In this role, you will support the Senior Electronics Test Engineer in the development and testing of new rechargeable battery products.
A major focus of the position is the design, development, and improvement of automated test equipment, where LabVIEW is the primary development tool.
You will collaborate closely with technicians, production, NPI, and quality teams to deliver reliable, high-performing test solutions.
If you enjoy problem-solving, automation, and building robust test systems from the ground up, this role offers a fantastic opportunity to grow and make a significant impact.
Key Responsibilities
Test Design & Execution
Design and execute test plans for new battery products under development.
Develop detailed test specifications aligned with customer requirements and SPQP standards.
Conduct failure mode analysis and support prevention activities to improve product reliability.
Equipment Development & Maintenance
Design, develop, and validate automated test equipment and fixtures, with LabVIEW as the primary programming environment.
Maintain and improve existing LabVIEW-driven test systems to ensure accuracy, efficiency, and long-term reliability.
Manage version control of compiled firmware (hex files) and provide support for programming fixtures.
Production & Technical Support
Provide expert troubleshooting support to production teams, particularly on LabVIEW automated systems.
Deliver training and guidance to Electronics Technicians on test processes and equipment.
Contribute to PFMEA activities and support testing requirements throughout the NPI process.
Quality, Validation & Reporting
Validate all test equipment and fixtures in line with company and industry standards.
Maintain accurate documentation in accordance with quality management systems.
Prepare detailed test reports and communicate results clearly to internal teams and customers.
Skills, Experience & Qualifications
The successful candidate will demonstrate:
A degree in Electrical or Electronic Engineering (BEng) or equivalent experience.
Previous experience in an electronics test engineering or manufacturing environment.
Advanced LabVIEW programming experience is essential, including use of existing VI libraries and developing new automated test sequences.
(This is a core component of the role.)
Additional programming experience in C# and Arduino platforms (desirable).
Experience using SQL databases for test data acquisition and analysis.
Strong fault-finding and troubleshooting skills across both test equipment and electronic assemblies.
Excellent written and verbal communication skills.
A highly organised and self-motivated approach, with the ability to adapt to changing priorities.
Why LabVIEW Expertise Matters in This Role
The Engineering team relies heavily on LabVIEW to design, automate, and maintain test systems used in battery pack manufacturing.
Your expertise will directly influence test accuracy, production efficiency, product reliability, and the success of new product introductions.
This role offers the chance to lead continuous improvement initiatives and shape the future of automated testing within the business.
How to Apply
If you are keen, please email your CV to nking@redlinegroup.Com or call 01582 878839 / 07961 158788 to discuss the role further. ....Read more...
Type: Permanent Location: Durham, England
Start: ASAP
Salary / Rate: £35000 - £50000 per annum
Posted: 2025-11-26 16:12:50
-
I am proud to be partnering with Trident Maritime Systems, a world-renowned leader in maritime engineering and technology in the defence sector, to recruit top talent for their growing team.
This is a fantastic opportunity to join an innovative and globally respected brand that delivers cutting-edge solutions across the maritime sector.
This exclusive partnership means we are your direct gateway to the best career opportunities within their organisation.
I am seeking skilled and motivated Electronic Test Technicians and Survey Repair Engineers.
These roles involves testing, inspecting, diagnosing, and repairing products to ensure functionality and quality standards.
You will contribute to maintaining high performance across manufacturing and engineering processes while adhering to company health and safety policies.
Key Responsibilities for an Electronic Test Technician and Electronic Repair Technician:
- Perform testing and inspection of manufactured and purchased products using relevant specifications and equipment.
- Diagnose faults and repair units, including wiring, card changes, and component-level replacements and PCB Repairs.
- Conduct surveys to assess product conditions and identify issues.
- Write detailed reports on test results, failures, and defective components.
- Provide support for prototype equipment, offering specialist advice on testing requirements.
- Maintain and improve test equipment and manufacturing processes.
- Work collaboratively to ensure deadlines and customer requirements are met.
- Follow health and safety guidelines and contribute to continuous improvement efforts.
Qualifications and Skills for an Electronic Test Technician and Electronic Repair Technician:
Essential:
- Level 3 qualification in Electrical and Electronics or equivalent experience.
- Strong understanding of electrical/electronic test practices.
- Ability to read circuit diagrams and fault-find to component level.
- Knowledge of electrical/electronic test equipment (such as Oscilloscopes, signal Generators and spectrum Analysers) and ESD procedures.
- Proficient in Microsoft Word, Excel, and programming.
Desirable:
- Experience in IPC 620 and 610 standards for repair.
- Effective communication skills, both written and verbal.
- Confident problem solver with the ability to meet tight deadlines.
- Self-motivated, team player, with a "can-do" attitude.
What Trident Offer
- Competitive salary based on experience.
- 25 days holiday plus bank holidays.
Option to buy or sell holiday
- Enhanced pension scheme.
- Cycle-to-work scheme.
- Christmas shutdown.
- Eyecare vouchers.
- Help at Hand Employee Support Programme including online GP appointments
- Refer-a-friend rewards scheme.
- Opportunities for professional growth and training
- Free refreshments on site
- Free car parking
Based in the heart of Poole Dorset you are only minutes away from 7 miles of award winning blue flag beaches, beautiful forests and great transport links to the South East and South West.
This really is a great place to live and work.
Relocation support will be considered for this role.
Holt Engineering is managing all hiring for these exciting roles.
If you are an agency and wish to partner with us on these opportunities, please reach out to discuss how to Join The Process.
As the role is for a defence sector business you will need to have lived in the UK for 5 years and be able to get clearance or be a UK national.
Apply Today!
If you have the required skills and experience for this role, we would love to hear from you.
Apply now or contact Ian at Holt Engineering on 07734406996 for more information. ....Read more...
Type: Permanent Location: Poole,England
Start: 26/11/2025
Salary / Rate: £1 - £100000 per annum
Posted: 2025-11-26 12:06:04
-
Are you ready to advance your career in marine technology? Our partner are growing their national team of Marine Electronics Technicians and Engineers, whether you're just starting out or an experienced professional ready to lead projects and mentor others, we have the right opportunity for you.
Join a dynamic team that delivers cutting-edge navigation, communication, and safety systems to commercial vessels.
Youll be working hands-on with industry-leading equipment, ensuring vessels remain operational, compliant, and connected.
The company value initiative, technical skill, and a customer-first approach; if that sounds like you, we want to hear from you.
What Youll Be Doing:
- Installing and commissioning marine electronics on vessels
- Performing maintenance, repairs, and equipment surveys
- Supporting customers with diagnostics and fault resolution
- Identifying service opportunities and recommending solutions
- Delivering projects across the UK and occasionally overseas
What Were Looking For:
- HNC/HND in Electronics or Electrical Engineering (or equivalent)
- Experience in:
-
- Marine or field-based electronics
- Electronic navigation and communication systems
- Fault-finding and installation
- Technical support and project engineering
Skills:
- Strong problem-solving ability
- Clear communication and customer-focused mindset
- Essential: Full UK driving licence
Desirable (but not essential):
- GMDSS Operators Certificate
- Radio/VDR Survey or Class Approval experience
- BOSIET/OLF Certification
- Manufacturer-specific training
Medical: Must be able to pass a medical and annual working at height training
Whats On Offer:
- Competitive salary (based on qualifications and experience)
- Company car
- Employer contribution pension scheme
- Career development pathways from Technician to Senior Engineer
- Training opportunities and autonomy in your role
Apply now and be part of the future of marine electronics.
TT ....Read more...
Type: Permanent Location: Bristol,England
Start: 26/11/2025
Salary / Rate: Competitive
Posted: 2025-11-26 08:44:07
-
Trainee Field Service EngineerCrawley
£27,000 to £28,000 Basic + (OTE £35,000) + Bonus + Door to door + Van + Personal use + Fuel card + Full Training + Stability + Lunch allowance + Pension + Holiday + Job satisfaction + Immediate start + StabilityJoin a market leader in a stable industry as a Trainee Field Service Engineer where you will have full on the job training to do your job to the best of your ability and have everyday job satisfaction in a varied role.
Enjoy working a local patch, working as part of a team in a supportive environment, whilst benefitting from a great package!The company manufactures, distributes, maintains and services high quality fuel pumps and forecourt equipment.
Due to an increase in demand, they are looking for a Trainee Field Service Engineer to join the team and help contribute to the consistent workload.
Your Role As Trainee Field Service Engineer Will Include:
* Full training
* Service and repairs of petrol pumps & forecourt equipment
* Trainee field service role covering the Crawley area
As A Trainee Field Service Engineer You Will Need To Have:
* Mechanical / Electronic Engineering background (ANY Considered)
* Full driving licence
* Ability to commute around the Crawley area and surrounding areas
Please apply or contact Rebecka on 07458163046 for immediate consideration
Keywords: Trainee, Trainee Field Service Engineer, Trainee engineer, trainee technician, Field Service Engineer, Field service, Mechanic, Mechanical, Electrical, Electromechanical,Crawley,Redhill,Horley,Lingfield,Horesham,Brighton,Charl wood, burgess hill,Smallfield,East Grinstead,Copthrone,Salfords,Forest Row This vacancy is being advertised by Future Engineering Recruitment Ltd.
The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.
Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed.
We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted. ....Read more...
Type: Permanent Location: Crawley, England
Start: asap
Duration: Perm
Salary / Rate: £27000 - £28000 per annum + Training + Stability + Work life balance
Posted: 2025-11-25 16:44:52
-
Are you looking for an Electronics Test Technician role based in Glasgow?
My client is looking for a handful of enthusiastic, inquisitive, and determined individuals who are looking for a challenging and fulfilling career to join our Repair team.
As part of a world-leading aerospace technology business is expanding its repair facility in Glasgow, you will be supporting major OEMs.
Including those supplying Airbus and Boeing, trusted by more than 300 airlines worldwide, this organisation develops advanced systems that transform how aircraft data is collected, managed and utilised.
You'll be responsible for testing, diagnosing, and repairing complex electronic systems used across global aviation fleets, directly contributing to safety, performance, and operational efficiency.
The Key Responsibilities for this Electronics Test Technician Role based in Glasgow:
Set up and conduct tests on electronic equipment, components and prototypes
Analyse data to ensure full compliance with engineering and regulatory standards
Diagnose and repair faults in electronic assemblies and systems
Perform maintenance, updates, and upgrades where required
Maintain accurate repair/test documentation and produce detailed reports
What you need for this Electronics Test Technician Role based in Glasgow:
HNC/HND in Electronic Engineering or equivalent experience
Strong practical electronics knowledge with hands-on troubleshooting skills
Experience using electronic test equipment (oscilloscope, multimeter, PSU, function generator, etc.)
Skilled with soldering tools, hand tools, and basic workshop equipment
Excellent attention to detail, communication and analytical capability
My client is unable to offer a sponsorship, so UK working rights needed, you will need to be able to pass Baseline Security Clearance.
APPLY NOW: Please send your CV to KGraveney@redlinegroup.Com or if you have any questions regarding the role please call on 01582878817 or 07961158774.
Please send your CV prior to calling. ....Read more...
Type: Permanent Location: Glasgow, Scotland
Start: ASAP
Salary / Rate: £25000 - £30000 per annum
Posted: 2025-11-14 14:39:45
-
Holt Engineering is currently working with an innovative Electronics manufacturing company based in Fareham, Due to an ever-expanding order book our clients are looking for an experienced Repair Technician.
As a Repair Technician, your role will be to assist in the review and repair of faulty products received by the company.
Duties for the Repair Technician:
- Repair and review all products received
- Rework of PCB components
- Working on SMT, through hole and PCB track repair procedures
- Soldering to IPC standards.
- Soldering small components.
- Soldering with a microscope at times.
To be a successful Repair Technician you must:
- PCB soldering experience
- Experience in electronic rework and repair
- Be able to understand technical drawings
- Solder to IPC Rework standards
- Experience in IPC 7711/7721
- IPC 610 certificate - beneficial
- Good attention to detail and be able to work to tight deadlines
For the successful Repair Technician, you will:
- Get a competitive pay structure
- Early finish on Fridays
- Friendly work environment
- 25 days annual leave
- Monthly company events
The working hours are:
- Monday to Thursday 7:30-16:30 and early finish on Fridays 12:30
Paying between £13.50-£16.00 ph (depending on experience)
Sound like a good fit?
Great, then we would love to hear from you!
If you would like to hear more information regarding the Repair Technician role Please call Sam on 07485 390946 or APPLY NOW for this advert! ....Read more...
Type: Permanent Location: Fareham,England
Start: 14/11/2025
Salary / Rate: £13.50 - £16 per hour
Posted: 2025-11-14 13:52:20
-
JOB DESCRIPTION
New Weekend Shift: Friday - Sunday 6:00AM - 6:30PM
Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry.
We offer a wide product range including decorative fashion paints, durable industrial roof repair coatings and, of course, the famous rust-fighting formula that started it all.
Pay: $23-$26/hour.
This position offers a 36-hour workweek with compensation equivalent to a standard 40-hour workweek.
Weekend Shift Differential: $3.00/hour
Schedule: Friday-Sunday, 6:00AM - 6:30PM
The primary result expected from the Lab Technician will be to complete and document performance testing of various coating attributes by making laboratory samples of paint technologies including color evaluations and color matching as well as other laboratory functions and by assisting in the development and optimization of new or existing products to support revenue growth and profits of the corporation. Typical tasks for this position include (but are not limited to) the following: Monitor product quality to ensure compliance to standards and specifications. Develop an understanding with supervision of the fundamentals of coatings technology. Compile results of tests and analyses. Set up and conduct experiments, tests, and analyses using standard paint test procedures and physical and chemical techniques. Conduct chemical and physical laboratory tests to assist scientists in making qualitative and quantitative analyses of solids, liquids, and gaseous materials, and document all experimental results. Provide and maintain a safe work environment by participating in safety programs, committees, or teams, and by conducting laboratory and plant safety audits. Prepare paint batches for products and following standardized formulas, or create experimental formulas. Preform lab support activities which may include routine maintenance or upkeep of equipment and lab areas such as salt fogs, QUV'S, milling room, hot room, or controlled temp.
& humidity cabinet. Responsibilities/Expectations: Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person. Maintain a good record of attendance and punctuality. Learn all manual tasks performed within the department. Perform tasks assigned using specific operating procedures and following department specific quality control processes and procedures. Treat people with dignity and respect. Conduct all business with integrity. Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities. Follow all safety procedures and company policies. QUALIFICATIONS: Chemistry - Knowledge of the chemical composition, structure, and properties of substances and of the chemical processes and transformations that they undergo.
This includes uses of chemicals and their interactions, danger signs, production techniques, and disposal methods. English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar. Computers and Electronics - Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming. Mathematics - Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications. Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance. Engineering and Technology - Knowledge of the practical application of engineering science and technology.
This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services. Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. High school graduate or equivalent (GED) with a focus in the sciences, with chemistry and related sciences preferred. Skills Science - Using scientific rules and methods to solve problems. Reading Comprehension - Understanding written sentences and paragraphs in work related documents. Quality Control Analysis - Conducting tests and inspections of products, services, or processes to evaluate quality or performance. Mathematics - Using mathematics to solve problems. Operation Monitoring - Watching gauges, dials, or other indicators to make sure a machine is working properly. Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times. Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. Time Management - Managing one's own time and the time of others. Writing - Communicating effectively in writing as appropriate for the needs of the audience. Active Learning - Understanding the implications of new information for both current and future problem-solving and decision-making. DESCRIPTION OF POSITION DUTIES/TASKS: Satellite Hazardous Waste Accumulation Production tank/Cleaning/filling 1.
Production Quality Lab Technicians may have to dispose of product samples, line flush, off-spec product, or expired product retain samples.
This waste material is transferred to the hazardous waste satellite accumulation drum. 2.
Production workers clean equipment and tanks pre-rinse, wipe, scrub, and final rinse surfaces using wash solvent, brushes and rags.
Dirty solvent is transferred to the satellite accumulation area. 3.
Transfer used wash solvent to the satellite accumulation drum or tank. 4.
Ensure hazardous waste storage or accumulation containers remain sealed except during the addition or removal of waste. 5.
Ensure Hazardous Waste storage containers are clearly labeled "Hazardous Waste." 6.
Care must be exercised when introducing waste into the satellite accumulation drum.
Do not drop on floor or area.
In the case of any spilled material, spills or drops shall be cleaned up immediately. 7.
When 55 gallons has accumulated, the satellite accumulation container must be moved to a permanent hazardous waste storage area within 3 days and relabeled "Hazardous Waste." REQUISITE SKILL, EDUCATION, OR OTHER QUALIFICATIONS: 1.
Knowledge and understanding of the chemical characteristics of the wastes which they are assigned to handle or control (i.e., flammability, toxics, incompatibilities, etc.). 2.
Type of protective equipment and clothing to be worn. 3.
Knowledge of what to do or who to notify in the event of a release, fire, or explosion. 4.
Knowledge of communication and alarm system. 5.
Know procedures for using facility emergency equipment. 6.
Predetermined responses and methods to control releases, fires, or explosions. 7.
Ability to shut down operations. From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis. Rust-Oleum is an equal-opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class. Job Type: Full-time Work Location: In personApply for this ad Online! ....Read more...
Type: Permanent Location: Brooklyn Park, Minnesota
Posted: 2025-11-13 14:10:53
-
JOB DESCRIPTION
New Weekend Shift: Friday - Sunday 6:00AM - 6:30PM
Rust-Oleum Corporation is a worldwide leader in protective paints and coatings for both home and industry.
We offer a wide product range including decorative fashion paints, durable industrial roof repair coatings and, of course, the famous rust-fighting formula that started it all.
Pay: $23-$26/hour.
This position offers a 36-hour workweek with compensation equivalent to a standard 40-hour workweek.
Weekend Shift Differential: $3.00/hour
Schedule: Friday-Sunday, 6:00AM - 6:30PM
The primary result expected from the Lab Technician will be to complete and document performance testing of various coating attributes by making laboratory samples of paint technologies including color evaluations and color matching as well as other laboratory functions and by assisting in the development and optimization of new or existing products to support revenue growth and profits of the corporation. Typical tasks for this position include (but are not limited to) the following: Monitor product quality to ensure compliance to standards and specifications. Develop an understanding with supervision of the fundamentals of coatings technology. Compile results of tests and analyses. Set up and conduct experiments, tests, and analyses using standard paint test procedures and physical and chemical techniques. Conduct chemical and physical laboratory tests to assist scientists in making qualitative and quantitative analyses of solids, liquids, and gaseous materials, and document all experimental results. Provide and maintain a safe work environment by participating in safety programs, committees, or teams, and by conducting laboratory and plant safety audits. Prepare paint batches for products and following standardized formulas, or create experimental formulas. Preform lab support activities which may include routine maintenance or upkeep of equipment and lab areas such as salt fogs, QUV'S, milling room, hot room, or controlled temp.
& humidity cabinet. Responsibilities/Expectations: Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person. Maintain a good record of attendance and punctuality. Learn all manual tasks performed within the department. Perform tasks assigned using specific operating procedures and following department specific quality control processes and procedures. Treat people with dignity and respect. Conduct all business with integrity. Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities. Follow all safety procedures and company policies. QUALIFICATIONS: Chemistry - Knowledge of the chemical composition, structure, and properties of substances and of the chemical processes and transformations that they undergo.
This includes uses of chemicals and their interactions, danger signs, production techniques, and disposal methods. English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar. Computers and Electronics - Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming. Mathematics - Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications. Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance. Engineering and Technology - Knowledge of the practical application of engineering science and technology.
This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services. Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. High school graduate or equivalent (GED) with a focus in the sciences, with chemistry and related sciences preferred. Skills Science - Using scientific rules and methods to solve problems. Reading Comprehension - Understanding written sentences and paragraphs in work related documents. Quality Control Analysis - Conducting tests and inspections of products, services, or processes to evaluate quality or performance. Mathematics - Using mathematics to solve problems. Operation Monitoring - Watching gauges, dials, or other indicators to make sure a machine is working properly. Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times. Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. Time Management - Managing one's own time and the time of others. Writing - Communicating effectively in writing as appropriate for the needs of the audience. Active Learning - Understanding the implications of new information for both current and future problem-solving and decision-making. DESCRIPTION OF POSITION DUTIES/TASKS: Satellite Hazardous Waste Accumulation Production tank/Cleaning/filling 1.
Production Quality Lab Technicians may have to dispose of product samples, line flush, off-spec product, or expired product retain samples.
This waste material is transferred to the hazardous waste satellite accumulation drum. 2.
Production workers clean equipment and tanks pre-rinse, wipe, scrub, and final rinse surfaces using wash solvent, brushes and rags.
Dirty solvent is transferred to the satellite accumulation area. 3.
Transfer used wash solvent to the satellite accumulation drum or tank. 4.
Ensure hazardous waste storage or accumulation containers remain sealed except during the addition or removal of waste. 5.
Ensure Hazardous Waste storage containers are clearly labeled "Hazardous Waste." 6.
Care must be exercised when introducing waste into the satellite accumulation drum.
Do not drop on floor or area.
In the case of any spilled material, spills or drops shall be cleaned up immediately. 7.
When 55 gallons has accumulated, the satellite accumulation container must be moved to a permanent hazardous waste storage area within 3 days and relabeled "Hazardous Waste." REQUISITE SKILL, EDUCATION, OR OTHER QUALIFICATIONS: 1.
Knowledge and understanding of the chemical characteristics of the wastes which they are assigned to handle or control (i.e., flammability, toxics, incompatibilities, etc.). 2.
Type of protective equipment and clothing to be worn. 3.
Knowledge of what to do or who to notify in the event of a release, fire, or explosion. 4.
Knowledge of communication and alarm system. 5.
Know procedures for using facility emergency equipment. 6.
Predetermined responses and methods to control releases, fires, or explosions. 7.
Ability to shut down operations. From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis. Rust-Oleum is an equal-opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class. Job Type: Full-time Work Location: In personApply for this ad Online! ....Read more...
Type: Permanent Location: Brooklyn Park, Minnesota
Posted: 2025-11-13 14:10:51
-
A leading global technology company in the energy sector is seeking an Electrical Assembly Technician to join its production and testing team in Cumbria.
Electrical and mechanical assembly, specifically building electrical contractor pins for Oil and Gas tree systems.
Key Responsibilities
Perform a variety of technical, mechanical, and electronic assembly tasks.
Conduct testing, measurements, and process control on production lines.
Read and interpret engineering drawings, work orders, and bills of materials.
Troubleshoot and repair issues related to mechanical or process performance.
Maintain tools, machinery, and equipment to ensure optimal operation.
Support continuous improvement initiatives and apply modern manufacturing principles.
Key Skills
Proven hands-on experience in mechanical assembly, testing, or manufacturing.
Ability to read blueprints and perform precision electrical tasks such as wire preparation, crimping, and harness termination.
Understanding of hydraulic, electronic, and mechanical systems. ....Read more...
Type: Permanent Location: Barrow-in-Furness, England
Start: ASAP
Duration: Temp-to-Perm
Salary / Rate: £36000 - £45000 Per Annum None
Posted: 2025-11-12 11:28:05
-
Product Engineer Electronics Assembly
Location: Fareham
Category: Engineering
Position: Full-time, Non-Managerial
Salary: £45,000 - £55,000
Are you a detail-oriented and proactive Product Engineer with hands-on experience in electronic assembly? Join our dynamic team and help drive manufacturing excellence by bridging customer requirements and production solutions.
What youll do:
- Create, check, and maintain Bills of Materials and detailed manufacturing documents
- Convert customer parts lists and drawings into clear, production-ready formats
- Develop and update Assembly Aids (AAs) and ensure documentation is controlled
- Liaise with Sales, Engineering, Production, Quality, and customers to resolve issues
- Support process improvement, analyse product yields and help find root causes
- Champion configuration control, design changes, and continual improvement
- Provide DFM feedback and assist sales with labour estimates
- Help implement new methods to maximise yield and efficiency
- Support quality activities and participate in audits
- Contribute to a collaborative team and busy manufacturing environment
What were looking for:
- Electronic assembly experience
- Ability to read technical drawings and electronic component specs
- Experience creating documents in Microsoft Word
- Prior experience as Engineer or Technician
- Understanding of MRP software and mechanical assembly
- Knowledge of continuous improvement practices
- Engineering qualification (A-Level, BTEC or higher)
- Trade test may be required to confirm practical skills
Key qualities:
- Excellent communicator with solid interpersonal skills
- Responsive, motivated, and able to work under own initiative
- Calm, collected, and disciplined approach within busy environments
- Strong organisational skills and attention to detail
If you are ready to take a hands-on role supporting electronics manufacturing and drive process improvements, we want to hear from you.
Apply now by sending your CV to Max Sinclair max@holtengineering.co.uk and help us meet production and quality objectives! ....Read more...
Type: Permanent Location: Fareham,England
Start: 12/11/2025
Salary / Rate: £45000 - £55000 per annum
Posted: 2025-11-12 08:39:04
-
OverviewLanguagesEnglishEducationCollege, CEGEP or other non-university certificate or diploma from a program of 1 year to 2 yearsExperience2 years to less than 3 yearsOn site Work must be completed at the physical location.
There is no option to work remotely.ResponsibilitiesTasksDesign and develop power equipment and systemsInstall equipmentMaintain equipmentRead blueprints or other instructions to determine work requirementsTest power equipment and systemsAssist in inspecting, testing and adjusting electronic componentsCalibrate electronic equipment and instrumentsCollect and compile operational or experimental dataCarry out applied research in fields of electrical and electronic engineering and physicsConduct or supervise the installation, commissioning, and operation of electrical and electronic equipment and systemsSet up and operate specialized and standard test equipment to diagnose, test and analyze the performance of electrical and electronic components, assemblies and systemsComplete work orders, test and maintenance reportsAdditional informationPersonal suitabilityEfficient interpersonal skillsValues and ethicsDedication ....Read more...
Type: Contract Location: Edmonton. Canada
Posted: 2025-11-11 19:02:15
-
A Production Test Technician is sought to join an innovative engineering team in Essex, contributing to the testing, validation, and verification of high-quality electronic products.
The Production Test Technician, Essex, will play a key role within Pickering's production test team, ensuring the reliability and performance of electronic systems through precise testing, continuous process improvement, and fault analysis.
Responsibilities include:
Working to implemented electronic test plans and procedures.
Performing tests on systems, including both hardware and software components.
Ensuring the reliability and accuracy of test results through continuous improvement initiatives.
Developing a thorough understanding of Pickering's products and systems.
Producing detailed reports of faults found to support ongoing product enhancement.
Assisting in the development of ATE test programs for new products.
Fault finding down to component level and carrying out clean, accurate repairs.
Adapting to new test methods and associated test fixtures/cables.
The Production Test Technician, Essex, will have the following key skills:
A higher-level qualification in Electrical or Electronic Engineering, such as HNC or BTEC Level 3.
Some experience in electronic test, ideally within a manufacturing or R&D environment.
Strong knowledge of electronic test methodologies, tools, and equipment.
Ability to fault-find and test down to component level.
Awareness of industry standards such as ISO 9001 and IPC.
Excellent problem-solving skills, attention to detail, and effective communication.
APPLY NOW - the Production Test Technician job in Essex could be of interest, send your CV to ADighton@RedlineGroup.Com
Or call Adam Dighton on 01582 878821 / 07961 158768. ....Read more...
Type: Permanent Location: Essex, England
Start: ASAP
Salary / Rate: £28000 - £31000 per annum
Posted: 2025-11-11 16:01:46
