-
Manufacturing Technician required to perform technical duties in electronic, mechanical or systems production by completing tests, measurements, operations and process controls.
Requirements
Ability to read blueprints, identify components, wire stripping and crimping, harness repair and termination hand tools for electronics, hydraulics and mechanical assemblies,
Subsea Technology or Manufacturing Centre experience.
Production Workflow knowledge.
Responsibilities
Production Test and Assembly
Use job packets, routings, work orders, wire lists, quality and bills of material.
Maintain production tools and equipment.
Perform troubleshooting to diagnose product, process or program defects and repair them. ....Read more...
Type: Contract Location: Barrow in Furness, England
Start: ASAP
Duration: Temp to Perm
Salary / Rate: £15 - £20 Per Annum None
Posted: 2026-06-05 13:58:51
-
Our client, a long-established electronics manufacturing and product development organisation, are looking for an Electronics Laboratory Technician in Newbury to join their team on a permanent basis.
This is an excellent entry-level opportunity within a fast-paced innovation environment, supporting prototype development, testing, and laboratory activities, with clear progression towards a Junior Electronics Engineer role.
Key responsibilities of the Electronics Laboratory Technician job in Newbury:
Support prototype builds, PCB assembly, rework, and proof-of-concept activities.
Assist with board bring-up, testing, and basic fault finding under engineer guidance.
Carry out manual testing of electronic assemblies and embedded products.
Use laboratory equipment such as multimeters, oscilloscopes, and power supplies.
Perform soldering, de-soldering, and modification of prototype hardware.
Maintain laboratory equipment, tools, and stock in a safe and organised manner.
Record test results, build notes, and issue reports accurately.
Support component identification, BOM checking, and sample preparation.
Assist with PCB and assembly inspection to identify faults or quality issues.
Support EMC testing activities and operate test equipment where required.
Work closely with engineers, contributing to project discussions and continuous improvement activities.
Experience required for the Electronics Laboratory Technician job in Newbury:
Relevant qualification(HNC/HND, BTEC, T-Level, apprenticeship or similar) in Electronics or a related field.
Strong hands-on interest in electronics, testing, and product development.
Basic understanding of electronic components, circuits, and PCB assemblies.
Some experience using test equipment such as multimeters or oscilloscopes.
Practical soldering skills or willingness to develop these.
Good attention to detail and ability to follow technical documentation.
Strong communication skills and willingness to learn from experienced engineers.
Exposure to embedded systems, PCB design tools, or programming (e.G.
Arduino, Python, C) would be advantageous.
If this Electronics Laboratory Technician job in Newbury could be of interest, please send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878816. ....Read more...
Type: Permanent Location: Newbury, England
Start: ASAP
Salary / Rate: £28000 - £35000 per annum
Posted: 2026-06-04 14:43:38
-
Test Engineer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: PCB, Testing, Electronics
Our Client:Is a pioneering family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We are seeking a skilled Test Engineer to join our client's team, who is responsible for developing test requirements, creating test instructions, and testing PCBs, assemblies, and systems.
The ideal candidate will have a strong background in electronics and measurement technology, with practical experience in handling measuring equipment and a good understanding of radio frequency and power engineering.
Main Responsabilities:
Development of test requirements and new test methods in collaboration with the development department
Creation of test instructions and test reports
Testing, repairing (requires e.g.
soldering skills) and commissioning of PCB's, assemblies and systems as well as participation in tests in the test field
Checking production orders and goods receipt material according to quality characteristics
Perform factory inspections with customers
Management of measuring equipment storage
Construction of test facilities for the rationalization of test procedures
Required Competencies:
Completed technical training in the direction of electronics/measurement technology, technician school, an advantage
Practical experience in handling measuring equipment
Knowledge of radio frequency and power engineering is an advantage
Excellent knowledge of German and English
Positive attitude to work
Reliable team player with a pronounced quality awareness
Enjoy working independently
Benefits:
Competitive salary and benefits package - Up to CHF 110k
Opportunity to work on exciting and challenging projects
Collaborative and dynamic work environment
Professional development and training opportunities
Comprehensive benefits package, including health insurance, retirement plan, and more
Flexible working hours and remote work options
30 Days Annual Leave
Location: Aargau, Baden, SwitzerlandSalary: CHF 80-110k + Bonus Benefits
Tech Stack: PCB, Testing & Electronics
Applicants for the Test Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/TESARG80110 ....Read more...
Type: Permanent Location: Baden, Switzerland
Start: ASAP
Salary / Rate: Swiss Franc80000 - Swiss Franc110000 per annum
Posted: 2026-06-03 01:07:02
-
Electronic Technician required to conduct off shore electronic maintenance.
Commercial electrical support experience required maintaining:
Offshore drilling equipment ideally:
Caterpillar
Detroit Diesel / MTU engine
or Marine / Hydraulic / Aviation mechanical equipment
The successful candidate will be responsible for the safe operation, maintenance and repair of downhole electronic devices, Allison Transmission, hydraulics open / close lub, air systems.
This role will be part based on the rig offshore and on shore. ....Read more...
Type: Permanent Location: Aberdeen, Scotland
Start: ASAP
Duration: Permanent
Salary / Rate: £46000 - £53000 Per Annum None
Posted: 2026-06-02 23:53:27
-
Manufacturing Technician to maintain production tools and equipment also troubleshoot product, process or program defects and repair them.
Key skills
Read blueprints, identify components, perform wire preparation, stripping and crimping: perform harness repair and termination: use pertinent manual hand tools.
Electronics, hydraulics and mechanical assemblies, automated machine operation and programming.
Basic knowledge of Low Voltage and High Voltage Electronics.
Lean Six Sigma
Production Workflow
Production Test
Production Assembly ....Read more...
Type: Permanent Location: Stonehouse, England
Start: ASAP
Duration: Permanent
Salary / Rate: £22000 - £38000 Per Annum None
Posted: 2026-06-02 23:30:17
-
Technician required with electrical assembly experience and IPC certification.
Key skills
Soldering, crimping and general wiring skills.
Ability to apply basic arithmetic operations, compute ratio and rate, percentage, fractions and ratios, and calculate weights and measures, including Imperial to Metric conversions.
Electronics precision engineering workmanship practices.
Role will be to perform all Electronic Assembler duties under zero supervision.
Following routings and records test measurements on PC based systems.
Specifically to build and tests various components of a complex downhole drilling tools.
....Read more...
Type: Permanent Location: Strouod, England
Start: ASAP
Duration: Permanent
Salary / Rate: £27000 - £36000 Per Annum None
Posted: 2026-06-02 23:12:25
-
Our client, a leading manufacturer of products for highly regulated industries including Marine, Medical, and more, are looking for an Electronic Engineer based in Newark to join their team on a permanent basis.
This is an office-based role supporting the development of innovative control panel and interface technologies for blue-chip customers across a range of industries.
Key responsibilities of the Electronic Engineer job based in Newark:
Support the design, development and testing of electronic hardware products.
Manage and implement hardware design changes driven by cost, obsolescence, or performance improvements.
Prepare technical specifications, reports, and documentation to a high professional standard.
Perform fault finding and debugging of electronic devices.
Conduct quality and reliability analysis (e.G.
MTBF).
Support EMC testing and wider electrical validation activities.
Work closely with production and production engineering teams to resolve issues and drive improvements.
Provide guidance and support to technicians and junior team members.
Identify and manage technical risks and issues throughout the product lifecycle.
Experience required for the Electronic Engineer job based in Newark:
Degree qualified in Electrical/Electronic Engineering, Computer Engineering or similar.
Experience in an electronics design or manufacturing environment.
Experience designing analogue and digital circuits using tools such as Altium Designer.
Strong understanding of EMC design and compliance testing.
Experience with digital communication protocols (e.G.
SPI, I2C, USB).
Strong documentation and reporting skills.
Ability to work independently and manage multiple tasks effectively.
Knowledge of programming languages (e.G.
C/C#) and simulation tools (e.G.
SPICE) would be advantageous.
If this Electronic Engineer job based in Newark could be of interest, please send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878816 ....Read more...
Type: Permanent Location: Newark, England
Start: ASAP
Salary / Rate: £38000 - £45000 per annum
Posted: 2026-06-01 11:35:02
-
JOB DESCRIPTION
Typical tasks for this position include (but are not limited to) the following:
Monitor product quality to ensure compliance to standards and specifications.Develop an understanding with supervision of the fundamentals of coatings technology.Compile results of tests and analyses.Set up and conduct experiments, tests, and analyses using standard paint test procedures and physical and chemical techniques.Conduct chemical and physical laboratory tests to assist scientists in making qualitative and quantitative analyses of solids, liquids, and gaseous materials, and document all experimental results.Provide and maintain a safe work environment by participating in safety programs, committees, or teams, and by conducting laboratory and plant safety audits.Prepare paint batches for products and following standardized formulas, or create experimental formulas.Preform lab support activities which may include routine maintenance or upkeep of equipment and lab areas such as salt fogs, QUV'S, milling room, hot room, or controlled temp.
& humidity cabinet.
Responsibilities/Expectations:
Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person.Maintain a good record of attendance and punctuality.Learn all manual tasks performed within the department.Perform tasks assigned using specific operating procedures and following department specific quality control processes and procedures.Treat people with dignity and respect.Conduct all business with integrity.Adhere to Rust-Oleum Corporation Quality principles and participate in all departmental and company-wide Quality activities.Follow all safety procedures and company policies.
QUALIFICATIONS:
Chemistry - Knowledge of the chemical composition, structure, and properties of substances and of the chemical processes and transformations that they undergo.
This includes uses of chemicals and their interactions, danger signs, production techniques, and disposal methods.English Language - Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar.Computers and Electronics - Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming.Mathematics - Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications.Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance.Engineering and Technology - Knowledge of the practical application of engineering science and technology.
This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services.Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.High school graduate or equivalent (GED) with a focus in the sciences, with chemistry and related sciences preferred.
Skills
Science - Using scientific rules and methods to solve problems.Reading Comprehension - Understanding written sentences and paragraphs in work related documents.Quality Control Analysis - Conducting tests and inspections of products, services, or processes to evaluate quality or performance.Mathematics - Using mathematics to solve problems.Operation Monitoring - Watching gauges, dials, or other indicators to make sure a machine is working properly.Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.Time Management - Managing one's own time and the time of others.Writing - Communicating effectively in writing as appropriate for the needs of the audience.Active Learning - Understanding the implications of new information for both current and future problem-solving and decision-making.
DESCRIPTION OF POSITION DUTIES/TASKS:
Satellite Hazardous Waste Accumulation
Production tank/Cleaning/filling
1.
Production Quality Lab Technicians may have to dispose of product samples, line flush, off-spec product, or expired product retain samples.
This waste material is transferred to the hazardous waste satellite accumulation drum.
2.
Production workers clean equipment and tanks pre-rinse, wipe, scrub, and final rinse surfaces using wash solvent, brushes and rags.
Dirty solvent is transferred to the satellite accumulation area.
3.
Transfer used wash solvent to the satellite accumulation drum or tank.
4.
Ensure hazardous waste storage or accumulation containers remain sealed except during the addition or removal of waste.
5.
Ensure Hazardous Waste storage containers are clearly labeled "Hazardous Waste."
6.
Care must be exercised when introducing waste into the satellite accumulation drum.
Do not drop on floor or area.
In the case of any spilled material, spills or drops shall be cleaned up immediately.
7.
When 55 gallons has accumulated, the satellite accumulation container must be moved to a permanent hazardous waste storage area within 3 days and relabeled "Hazardous Waste."
REQUISITE SKILL, EDUCATION, OR OTHER QUALIFICATIONS:
1.
Knowledge and understanding of the chemical characteristics of the wastes which they are assigned to handle or control (i.e., flammability, toxics, incompatibilities, etc.).
2.
Type of protective equipment and clothing to be worn.
3.
Knowledge of what to do or who to notify in the event of a release, fire, or explosion.
4.
Knowledge of communication and alarm system.
5.
Know procedures for using facility emergency equipment.
6.
Predetermined responses and methods to control releases, fires, or explosions.
7.
Ability to shut down operations.
From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and two floating holidays per year.
You are also eligible to earn two weeks of vacation on an annualized basis.
Rust-Oleum is an equal-opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Brooklyn Park, Minnesota
Posted: 2026-05-29 14:10:40
-
Join a workshop team where engineers stay for 20-30 years.
We're recruiting for a Senior Workshop Service Technician to join Karcher's long-standing Banbury workshop team, supportive environment where people genuinely enjoy what they do, know their craft and get stuck in.
This isn't a high-pressure, micromanaged environment.
It's a professional, hands-on workshop where everyone pulls together, there's good banter, people support each other and experienced engineers take pride in doing a great job.
You'll work on a varied range of industrial cleaning equipment - from commercial pressure washers and scrubber dryers through to larger specialist cleaning machinery - diagnosing faults, servicing, repairing and preparing equipment to a high standard.
This role would suit someone from a mechanical, plant, vehicle, agricultural, FLT, powered access or general engineering background who enjoys fault finding, repairs and being part of a close-knit technical team.
The Role of Senior Workshop Technician
Diagnose, service, maintain and repair Karcher industrial cleaning equipment and specialist machinery
Carry out fault finding across mechanical, electrical, hydraulic and pneumatic systems
Conduct pre-delivery inspections (PDI's) and machine preparation
Replace components, complete repairs and maintain high workshop standards
Produce accurate repair documentation and cost estimates using service systems
Support field engineers and fellow workshop technicians where required
Ensure tools, equipment and working practices meet safety and quality standards
Work methodically and follow service processes to deliver a high standard of workmanship
What We're Looking For
We're open to transferable backgrounds and would love to hear from people with experience such as:
Workshop Mechanic | Garage Mechanic / Vehicle Technician | FLT Engineer / Forklift Technician | Plant, Agricultural or Powered Access Engineer | Diesel Technician | Workshop Engineer | Service Technician | Maintenance Engineer
You'll ideally bring:
Strong mechanical fault-finding skills
Workshop-based service, repair or maintenance experience
Good understanding of engines, hydraulics, electrics/electronics, batteries and mechanical systems
A practical, hands-on mindset and pride in quality workmanship
A methodical approach and willingness to learn
Good team fit - someone who enjoys being part of a supportive workshop environment
What's in it for you?
Up to £41,110 DOE plus an excellent benefits package, including:
25 days holiday + bank holidays + your birthday off
Pension, health plan, sick pay and critical illness cover
End of year discretionary bonus
Staff discounts and social events
Ongoing training and career development
Stable Monday-Friday workshop role (8:30am-5:00pm)
A genuinely supportive, long-standing team environment
If you enjoy fault finding, like variety, take pride in quality workmanship and want to be part of a team where people genuinely stay - we'd love to hear from you. ....Read more...
Type: Permanent Location: Banbury, England
Start: ASAP
Salary / Rate: Up to £41110.1 per annum + excellent benefits
Posted: 2026-05-28 10:20:36
-
We are looking for a skilled Manufacturing Technician to join our growing production team, supporting the build of equipment used in cutting-edge marine and subsea environments.
This is a hands-on role ideal for someone with strong electronics assembly and wiring experience.
Key Responsibilities
Operate micro CNC machinery for precision component production
Solder PCBs and electronic circuitry to a high standard
Build and assemble wiring looms and cable harnesses
Follow manufacturing procedures, technical drawings, and circuit diagrams
Carry out PAT testing and quality inspections on circuitry and cables
Ensure all products meet strict quality and safety standards
Key Skills
Proven experience in electronic assembly or manufacturing
Strong PCB soldering and wiring skills
Ability to read and interpret circuit diagrams and engineering drawings
Experience with micro CNC machines (desirable)
High attention to detail and commitment to quality ....Read more...
Type: Permanent Location: Barrow-in-Furness, England
Start: ASAP
Duration: Temp-to-Perm
Salary / Rate: £30000 - £42000 Per Annum None
Posted: 2026-05-27 11:22:11
-
Mechanical and Electrical Manufacturing Technician required to join a growing production team, supporting the build of equipment used in cutting edge marine and subsea applications.
This is a hands on role ideal for someone with strong electronics assembly and wiring experience.
Responsibilities
Operate micro CNC machinery for precision component production
Solder PCBs and electronic circuitry to a high standard
Build and assemble wiring looms and cable harnesses
Follow manufacturing procedures, technical drawings, and circuit diagrams
Carry out PAT testing and quality inspections on circuitry and cables
Ensure all products meet strict quality and safety standards
Skills
Proven experience in electronic assembly or manufacturing
Strong PCB soldering and wiring skills
Ability to read and interpret circuit diagrams and engineering drawings
Experience with micro CNC machines.
High attention to detail and commitment to quality ....Read more...
Type: Permanent Location: Barrow-in-Furness, England
Start: ASAP
Duration: Temp to Perm
Salary / Rate: £28000 - £42000 Per Annum None
Posted: 2026-05-27 11:22:07
-
An RF Filter Alignment Technician is sought to join an innovative engineering team in Sedgefield, County Durham, contributing to the alignment, calibration, and testing of advanced RF, microwave and mmWave subsystems for mission-critical communication applications.
The RF Filter Alignment Technician, Sedgefield, County Durham, will be expected to develop your understanding in the field, learning from peers and senior engineers in technical areas and industry best practices.
This may include RF alignment techniques, microwave testing processes, calibration procedures, and production support within a high-technology manufacturing environment.
Responsibilities include:
Work with design, test, and production teams to support RF alignment and test activities.
Configure and operate RF and microwave test benches using spectrum analysers, network analysers, signal generators, power meters, and related instrumentation.
Perform alignment, tuning, and optimisation of RF/mmWave circuits, filters, amplifiers, transmit/receive units, and subsystems.
Develop and execute alignment and calibration procedures for prototypes and production units.
Debug and validate RF systems by troubleshooting component-level and board-level issues.
Collaborate with mechanical, electronic, and production engineering teams to improve manufacturability and testability.
Maintain comprehensive technical documentation, calibration logs, and test records.
Support production teams with technical queries, diagnostics, and maintenance of RF test equipment and test benches.
Assist with new product introduction (NPI) activities, supporting the transition from prototype to production.
Recommend and implement improvements to alignment processes, tooling, and test procedures.
Key skills & experience:
Qualification in Electronics, RF Engineering, or equivalent industry experience.
Proficiency with RF and microwave test equipment including network analysers, spectrum analysers, and signal generators.
Practical experience with RF alignment, calibration, and microwave measurement techniques.
Strong troubleshooting and fault-finding skills on RF and electronic assemblies.
Experience working within electronics manufacturing or production environments.
Understanding of RF parameters including gain, return loss, frequency response, noise, and spurious emissions.
Strong problem-solving and analytical skills.
Effective communication and teamwork abilities.
Positive attitude towards health and safety and continuous improvement.
How to apply:
Apply now for the RF Filter Alignment Technician role in Sedgefield, County Durham.
Send your CV to adighton@redlinegorup.Com or call Adam on 01582 878821. ....Read more...
Type: Permanent Location: Sedgefield, England
Start: ASAP
Salary / Rate: £28000 - £30000 per annum
Posted: 2026-05-26 15:26:27
-
My client, a prominent technology engineering firm, is seeking to recruit a Production Technician to join their team at their headquarters in Hampshire.
As a Production Technician, based in Hampshire, you will be working through day-to-day tasks as established by the Production Supervisor of the working area, and in accordance with the production plan, on the wiring and assembly of production jobs.
Responsibilities for the Production Technician :
Working through day to day tasks in accordance with the production plan, on the wiring and assembly of production jobs.
Adhering to Quality standards, following set procedures & work flows at all times
Inspecting work in accordance with Inspection guidelines
Soldering, as required.
Working towards IPC-620 standard (training will be provided)
Conducting procedural tests on production products
The ideal Production Technician candidate, based in Hampshire will have previous experience within a production/engineering environment, ideally with knowledge of electronics/soldering.
You will have strong attention to detail, communication and organisation skills, with an understanding of technical drawings desirable.
You will be self-motivated, with the ability to work on your own initiative or as part of a team.
This Production Technician job, based in Hampshire is a fantastic opportunity to learn and develop new skills and increase your personal career development as part of a leading technology/engineering company so if you are interested, please apply today by emailing a copy of your up-to-date CV to rwilcocks@redlinegroup.Com or phone 01582 87 8810. ....Read more...
Type: Permanent Location: Hampshire, England
Start: ASAP
Posted: 2026-05-26 07:54:57
-
Join a team designing and testing advanced wireline electronic tools used in well site operations for oil and gas production.
Your role
Test electronic circuits and sub-assemblies manual and automated.
Fault-find to component level using oscilloscopes, DVMs, etc.
Perform electrical safety checks, Megger and flash tests.
Support occasional electronics assembly and give testing feedback
Contribute to a culture of safety and continuous improvement
What you will need
Apprenticeship, HNC or equivalent in electronics
Prior experience in electronics testing
Solid understanding of circuit theory and fault-finding techniques ....Read more...
Type: Permanent Location: Liverpool, England
Start: ASAP
Duration: Permanent
Salary / Rate: £32000 - £35000 Per Annum None
Posted: 2026-05-23 20:28:22
-
An experienced Electrical Assembly Technician undertakes a variety of tasks relating to the installation, wiring and piping of electrical, electronic and pneumatic components
This includes checking and testing completed systems and carrying out corrections and repairs.
Responsibilities
The following list is an indication of roles and responsibilities you will be expected to undertake within our organisation.
The list is not exhaustive and intended as guidance only.
Preparation and assembly of cable and pipe ways, bracketing and support systems.
Connection of electrical circuits and networks ensuring compatibility of components.
Carrying out pre-commissioning checks and testing.
Preventative maintenance of systems by routine inspection.
Competent at soldering, crimping and general wiring skills, as well as detecting workmanship issues of downhole electronics equipment and processes.
Requirements
The following list is an indication of the skills that the successful candidate will possess, in fulfilment of the position.
Proven experience as an electrical fitter.
Experience in industrial electrical systems.
Ability to apply basic arithmetic operations, compute ratio and rate, percentage, fractions and ratios, and calculate weights and measures.
Also Imperial to Metric conversions. ....Read more...
Type: Permanent Location: Stonehouse, England
Start: ASAP
Duration: Contract for one year
Salary / Rate: £28000 - £34000 Per Annum None
Posted: 2026-05-22 15:33:52
-
You will be responsible for performing soldering, crimping, and general wiring tasks, as well as detecting and resolving workmanship issues.
Additionally, you will actively contribute to Lean and 5S improvements, promoting a culture of continuous improvement within the organization.
Responsibilities
Develop insights and implement 5S improvements to enhance efficiency and productivity
Conduct soldering, crimping, and general wiring tasks with precision and accuracy
Detect and resolve workmanship issues in downhole electronics equipment and processes
Requirements
Minimum of 3 years of experience in a similar functional area
Proficient in soldering, crimping, and general wiring techniques
Solid understanding of metrics and the ability to utilize them for process improvements
Ability to work independently and take ownership of assigned tasks
....Read more...
Type: Permanent Location: Stonehouse, England
Start: ASAP
Duration: Permanent
Salary / Rate: £32000 - £35000 Per Annum None
Posted: 2026-05-22 15:25:23
-
We have an exciting opportunity for an Electrical Technician, competent at soldering, crimping and general wiring skills
Responsibilities
Perform soldering, crimping, and general wiring tasks for the installation, maintenance, and repair of electrical systems and downhole electronics equipment.
Conduct inspections and identify workmanship issues in downhole electronics equipment and processes.
Collaborate with engineers, electricians, and other team members to plan and execute electrical projects related to oil and gas operations.
Read and interpret electrical schematics, blueprints, and technical drawings specific to the oil and gas industry.
Requirements
High school diploma or equivalent: technical certification or associate degree in Electrical Technology or a related field is preferred.
Proficiency in soldering, crimping, and general wiring techniques.
Familiarity with electrical codes, regulations, and safety guidelines specific to oil and gas operations.
Experience working with downhole electronics equipment and processes ....Read more...
Type: Permanent Location: Stonehouse, England
Start: ASAP
Duration: Permanent
Salary / Rate: £28000 - £36000 Per Annum None
Posted: 2026-05-22 15:25:19
-
We are looking an Electronics Test Technician to carry out electrical and functional testing of PWAs (Printed Wiring Assemblies) and electronic assemblies.
This role is primarily focused on testing and measurement
Key Responsibilities
Perform functional testing on PWAs and electronic assemblies.
Use electronic lab equipment such as, Multimeters, Oscilloscopes
Low and high voltage power supplies (up to 400VDC)
Carry out debugging and measurement tasks on electromechanical assemblies.
Document and report test results accurately.
Work to established engineering and safety standards.
Experience Required
Hands-on experience with electronic lab and test equipment.
Understanding of electrical measurement and testing techniques.
Knowledge often gained through further education in Electrical or Electronic Engineering (ONC, HNC, HND, NVQ Level 2 ....Read more...
Type: Permanent Location: Stonehouse, England
Start: ASAP
Duration: Permanent
Salary / Rate: £30000 - £34000 Per Annum None
Posted: 2026-05-22 15:24:04
-
We are seeking a proactive and detail-oriented individual to join our team as a Test Technician.
In this role, you will provide essential support to lead Test Engineers in various tasks related to site preparation, maintenance, and testing activities.
Your responsibilities will include but are not limited to:
Assisting in site preparation and maintenance tasks
Conducting pressure and control systems checks
Operating mechanical and steam vacuum systems
Performing instrumentation calibrations
Maintaining and operating steam boilers
Operating high-pressure gas and fluidic systems
Utilising electrical and electronic measurement and testing equipment
Skills and Behavioural Competencies:
Degree in Aerospace, Mechanical or Electrical Engineering, or equivalent
Experience working with high-pressure gas systems
Familiarity with electronics and High Voltage equipment
....Read more...
Type: Permanent Location: Aylesbury, England
Start: ASAP
Duration: Permanent
Salary / Rate: £42000 - £48000 Per Annum None
Posted: 2026-05-22 13:33:37
-
Are you ready to advance your career in marine technology? Our partner are growing their national team of Marine Electronics Technicians and Engineers, whether you're just starting out or an experienced professional ready to lead projects and mentor others, we have the right opportunity for you.
Join a dynamic team that delivers cutting-edge navigation, communication, and safety systems to commercial vessels.
Youll be working hands-on with industry-leading equipment, ensuring vessels remain operational, compliant, and connected.
The company value initiative, technical skill, and a customer-first approach; if that sounds like you, we want to hear from you.
What Youll Be Doing:
- Installing and commissioning marine electronics on vessels
- Performing maintenance, repairs, and equipment surveys
- Supporting customers with diagnostics and fault resolution
- Identifying service opportunities and recommending solutions
- Delivering projects across the UK and occasionally overseas
What Were Looking For:
- HNC/HND in Electronics or Electrical Engineering (or equivalent)
- Experience in:
-
- Marine or field-based electronics
- Electronic navigation and communication systems
- Fault-finding and installation
- Technical support and project engineering
Skills:
- Strong problem-solving ability
- Clear communication and customer-focused mindset
- Essential: Full UK driving licence
Desirable (but not essential):
- GMDSS Operators Certificate
- Radio/VDR Survey or Class Approval experience
- BOSIET/OLF Certification
- Manufacturer-specific training
Medical: Must be able to pass a medical and annual working at height training
Whats On Offer:
- Competitive salary (based on qualifications and experience)
- Company car
- Employer contribution pension scheme
- Career development pathways from Technician to Senior Engineer
- Training opportunities and autonomy in your role
Apply now and be part of the future of marine electronics.
TT ....Read more...
Type: Permanent Location: Essex,England
Start: 21/05/2026
Salary / Rate: Competitive
Posted: 2026-05-21 21:55:04
-
Are you ready to advance your career in marine technology? Our partner are growing their national team of Marine Electronics Technicians and Engineers, whether you're just starting out or an experienced professional ready to lead projects and mentor others, we have the right opportunity for you.
Join a dynamic team that delivers cutting-edge navigation, communication, and safety systems to commercial vessels.
Youll be working hands-on with industry-leading equipment, ensuring vessels remain operational, compliant, and connected.
The company value initiative, technical skill, and a customer-first approach; if that sounds like you, we want to hear from you.
What Youll Be Doing:
- Installing and commissioning marine electronics on vessels
- Performing maintenance, repairs, and equipment surveys
- Supporting customers with diagnostics and fault resolution
- Identifying service opportunities and recommending solutions
- Delivering projects across the UK and occasionally overseas
What Were Looking For:
- HNC/HND in Electronics or Electrical Engineering (or equivalent)
- Experience in:
-
- Marine or field-based electronics
- Electronic navigation and communication systems
- Fault-finding and installation
- Technical support and project engineering
Skills:
- Strong problem-solving ability
- Clear communication and customer-focused mindset
- Essential: Full UK driving licence
Desirable (but not essential):
- GMDSS Operators Certificate
- Radio/VDR Survey or Class Approval experience
- BOSIET/OLF Certification
- Manufacturer-specific training
Medical: Must be able to pass a medical and annual working at height training
Whats On Offer:
- Competitive salary (based on qualifications and experience)
- Company car
- Employer contribution pension scheme
- Career development pathways from Technician to Senior Engineer
- Training opportunities and autonomy in your role
Apply now and be part of the future of marine electronics.
TT ....Read more...
Type: Permanent Location: Liverpool,England
Start: 21/05/2026
Salary / Rate: Competitive
Posted: 2026-05-21 21:54:03
-
Are you ready to advance your career in marine technology? Our partner are growing their national team of Marine Electronics Technicians and Engineers, whether you're just starting out or an experienced professional ready to lead projects and mentor others, we have the right opportunity for you.
Join a dynamic team that delivers cutting-edge navigation, communication, and safety systems to commercial vessels.
Youll be working hands-on with industry-leading equipment, ensuring vessels remain operational, compliant, and connected.
The company value initiative, technical skill, and a customer-first approach; if that sounds like you, we want to hear from you.
What Youll Be Doing:
- Installing and commissioning marine electronics on vessels
- Performing maintenance, repairs, and equipment surveys
- Supporting customers with diagnostics and fault resolution
- Identifying service opportunities and recommending solutions
- Delivering projects across the UK and occasionally overseas
What Were Looking For:
- HNC/HND in Electronics or Electrical Engineering (or equivalent)
- Experience in:
-
- Marine or field-based electronics
- Electronic navigation and communication systems
- Fault-finding and installation
- Technical support and project engineering
Skills:
- Strong problem-solving ability
- Clear communication and customer-focused mindset
- Essential: Full UK driving licence
Desirable (but not essential):
- GMDSS Operators Certificate
- Radio/VDR Survey or Class Approval experience
- BOSIET/OLF Certification
- Manufacturer-specific training
Medical: Must be able to pass a medical and annual working at height training
Whats On Offer:
- Competitive salary (based on qualifications and experience)
- Company car
- Employer contribution pension scheme
- Career development pathways from Technician to Senior Engineer
- Training opportunities and autonomy in your role
Apply now and be part of the future of marine electronics.
TT ....Read more...
Type: Permanent Location: County Down,Northern Ireland
Start: 21/05/2026
Salary / Rate: Competitive
Posted: 2026-05-21 21:53:04
-
We are looking for an Electromechanical Assembly Technician to manufacture, assemble, test, and rework high-complexity electromechanical equipment used in marine radar and navigation systems.
You will be responsible for the precision assembly, testing, and rework of electromechanical products, ensuring high-quality standards are met throughout the manufacturing process.
The role also involves working to detailed procedures and contributing to continuous improvement activities.
Key Responsibilities
Assemble, test, and rework electromechanical equipment to high quality standards
Work from technical drawings, procedures, schematics, and instructions
Perform detailed manual tasks including soldering, wiring, crimping, drilling, and PCB rework
Inspect and verify own work and support quality checks on others??? work
Troubleshoot and resolve manufacturing defects
Record and manage data using business systems
Maintain a clean, organised, and safe working environment (5S standards)
Requirements
Minimum two years of experience in an engineering or manufacturing environment
Strong attention to detail and problem-solving ability
Good numeracy and literacy skills
Experience in soldering, wiring, crimping, drilling, and PCB rework
Radar or defence electronics experience (desirable) ....Read more...
Type: Permanent Location: North London, England
Start: ASAP
Duration: Permanent
Salary / Rate: £33000 - £38000 Per Annum None
Posted: 2026-05-21 14:50:03
-
We are looking for a Production Technician to manufacture, assemble, test, and rework high-complexity electromechanical equipment used in marine radar and navigation systems.
You will be responsible for the precision assembly, testing, and rework of electromechanical products, ensuring high-quality standards are met throughout the manufacturing process.
The role also involves working to detailed procedures and contributing to continuous improvement activities.
Key Responsibilities
Assemble, test, and rework electromechanical equipment to high quality standards
Work from technical drawings, procedures, schematics, and instructions
Perform detailed manual tasks including soldering, wiring, crimping, drilling, and PCB rework
Inspect and verify own work and support quality checks on others??? work
Troubleshoot and resolve manufacturing defects
Record and manage data using business systems
Maintain a clean, organised, and safe working environment (5S standards)
Requirements
Minimum two years of experience in an engineering or manufacturing environment
Strong attention to detail and problem-solving ability
Good numeracy and literacy skills
Experience in soldering, wiring, crimping, drilling, and PCB rework
Radar or defence electronics experience (desirable) ....Read more...
Type: Permanent Location: North London, England
Start: ASAP
Duration: Permanent
Salary / Rate: £30000 - £38000 Per Annum None
Posted: 2026-05-21 14:40:52
-
Test Technician - Electronics
Are you a Test Technician with hands-on experience testing electronic or power-based systems, looking to work with high-power, cutting-edge technology?
Our client, a global leader in green energy technology, is expanding their specialist R&D and test team in Glasgow, Scotland.
This hybrid role offers strong technical exposure, long-term development, and the opportunity to support advanced battery charging and power conversion products used in robotics, defence, rail, and industrial automation.
Key Responsibilities for this Test Technician - Electronics job are:
Test industrial charging systems, comparing results to given specifications.
Construct, modify and maintain test fixtures and setups, following electrical diagrams.
Setup equipment such as power supplies, oscilloscopes and data loggers.
Assembly of cables and connectors for test setups.
Prepare reports to be shared with R&D engineers and management.
Requirements for this Test Technician - Electronics job are:
Experience working with high power electrical systems.
Knowledge of product test procedures and the ability to follow instructions.
Practical knowledge of laboratory equipment such as Thermal chambers, power supplies and oscilloscopes would be ideal.
Otherwise, the potential to transfer skills from another background.
The ability to work safely with high voltages, as our current products may be powered by up to 660Vac, 3Ph, input.
Experience in industrial, defence, rail, power, or similar sectors is beneficial.
To apply for this Test Technician - Electronics role: Please send your CV to NDrain@redlinegroup.Com ....Read more...
Type: Permanent Location: Glasgow, Scotland
Start: ASAP
Salary / Rate: £30000 - £40000 per annum
Posted: 2026-05-14 08:23:51
