-
Technician required with electrical assembly experience and IPC certification.
Ker skills
Soldering, crimping and general wiring skills.
Ability to apply basic arithmetic operations, compute ratio and rate, percentage, fractions and ratios, and calculate weights and measures, including Imperial to Metric conversions.
Electronics precision engineering workmanship practices.
Role will be to perform all Electronic Assembler duties under zero supervision.
Following routings and records test measurements on PC based systems.
....Read more...
Type: Permanent Location: Stroud, England
Start: ASAP
Duration: Permanent
Salary / Rate: £25000 - £28000 Per Annum None
Posted: 2025-12-12 09:48:30
-
Test technician with good all round precision engineering mechanical, electronic and simulation test validation and verification experience required to join a comprehensive in house test facility.
Component, product, mechanical and electronic / electrical testing, assembly & disassembly experience ideally with test equipment maintenance, calibration, environmental screening, modification, troubleshooting and repair skills will be put to great use in this role.
Role requirements
Electrical and/or mechanical apprenticeship ideally with ONC/HNC or other engineering qualifications.
Mechanical fitting or electrical experience.
Supporting design and development design teams with mechanical and electrical test fixtures.
Diagnosis and fault finding.
Mechanical assembly / electrical systems.
Understanding of engineering drawings, schematics and flow charts.
An eye of irregularities in data (e.g.
over temperatures, over pressures). ....Read more...
Type: Permanent Location: Gloucester, England
Start: ASAP
Duration: Permanent
Salary / Rate: £32000 - £44000 Per Annum None
Posted: 2025-12-12 09:37:38
-
Electronic Instrument Test technician with good all round precision engineering electronic data acquisition, test validation and verification experience required to join a comprehensive in house test facility.
Component and product, instrumentation, electronic / electrical testing experience ideally in a very practical precision design environment.
Key skills
Data acquisition system build and administration to experiment, collect data and calculate results.
Set up, configure data acquisitions system software, example NI DAQ, NI LabVIEW, DASYLab.
Instrumentation use including:
Pressure sensors
Accelerometers
Flow meters
Loadcells
Thermocouples.
Cable layout and installation route cabling
Soldering skills at connector and PCB level
Digital multi meter (DMM) and oscilloscope knowledge.
Environmental testing.
Inverters, 3 phase motors and programmable Logic controller knowledge.
....Read more...
Type: Permanent Location: Gloucester, England
Start: ASAP
Duration: Permanent
Salary / Rate: £26000 - £42000 Per Annum None
Posted: 2025-12-12 09:36:36
-
Test technician with good all round precision engineering mechanical test validation and verification experience required to join a comprehensive in house test facility.
Component, product, mechanical testing, assembly & disassembly experience ideally with test equipment maintenance, calibration, environmental screening, modification, troubleshooting and repair skills will be put to great use in this role.
Previous experience in a mechanical apprenticeship, ONC or HNC in engineering, NVQ or C&G level 3 in mechanical engineering is required ideally with
Mechanical fitting skills practical ability with hand and power tools.
Mobile hydraulics.
Pneumatics
Pressure systems
Pressure equipment (e.g.
Accumulators/pulsation dampener)
Pressure safety equipment, e.g.
Pressure Relief Valves.
Fluid Power systems ??? Pumps, Piping, Valves.
Plant maintenance activities, installation or fault finding and repairs of equipment and services.
3D CAD
....Read more...
Type: Permanent Location: Stonehouse, England
Start: ASAP
Duration: Permanent
Salary / Rate: £28000 - £45000 Per Annum None
Posted: 2025-12-12 09:36:34
-
JOB DESCRIPTION
WE WILL TRAIN YOU! NOW HIRING IN MULTIPLE LOCATIONS!
The Commercial Façade Field Technician actively performs and enforces Company safety policy and program to minimize accidents affecting employees, the public, and property.
They will be responsible for attending safety meetings, complying with governmental regulations, reporting, and investigating accidents, and planning site-specific job safety procedures including:
$21-38/hour (not including prevailing wage)
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Attend and understand daily onsite safety brief prior to the start of the WTI project.
Inspect and ensure safety of surroundings, equipment and tools and identify and discuss any safety concerns.
Execution of project tasks with knowledge of expected production rates, ensuring tools and materials are used safely and efficiently to complete the assigned project. Complete the project per the scope or work, design and specification of contract & engineering documents as directed by foreman.
Responsible to aid foreman in tracking and monitoring project inventory. Maintains highest quality on-site customer relations in projecting positive image. Has knowledge/understanding and performs work in compliance with all governmental rules and regulations affecting work sites and employees, i.e.
OSHA, DOT, EEO/Affirmative Action, EPA, etc. Provides management with earliest possible notification of real and potential job problems. Accepts responsibility for the care, custody, and use of company equipment, material, tools, and other assets as assigned by the WTI Commercial Foreman. Understands and executes proper material and equipment usage, maintenance, and storage. Perform any other duty and/or project as required or assigned by the WTI Foreman and/or Commercial Business Manager. Maintains ethical business conduct.
Job Requirements:
Masons & Tuckpointers Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Cold Applied Waterproofing Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $21 and $38.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Gainesville, Florida
Posted: 2025-12-11 14:09:15
-
JOB DESCRIPTION
WE WILL TRAIN YOU! NOW HIRING IN MULTIPLE LOCATIONS!
The Commercial Façade Field Technician actively performs and enforces Company safety policy and program to minimize accidents affecting employees, the public, and property.
They will be responsible for attending safety meetings, complying with governmental regulations, reporting, and investigating accidents, and planning site-specific job safety procedures including:
$21-38/hour (not including prevailing wage)
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Attend and understand daily onsite safety brief prior to the start of the WTI project.
Inspect and ensure safety of surroundings, equipment and tools and identify and discuss any safety concerns.
Execution of project tasks with knowledge of expected production rates, ensuring tools and materials are used safely and efficiently to complete the assigned project. Complete the project per the scope or work, design and specification of contract & engineering documents as directed by foreman.
Responsible to aid foreman in tracking and monitoring project inventory. Maintains highest quality on-site customer relations in projecting positive image. Has knowledge/understanding and performs work in compliance with all governmental rules and regulations affecting work sites and employees, i.e.
OSHA, DOT, EEO/Affirmative Action, EPA, etc. Provides management with earliest possible notification of real and potential job problems. Accepts responsibility for the care, custody, and use of company equipment, material, tools, and other assets as assigned by the WTI Commercial Foreman. Understands and executes proper material and equipment usage, maintenance, and storage. Perform any other duty and/or project as required or assigned by the WTI Foreman and/or Commercial Business Manager. Maintains ethical business conduct.
Job Requirements:
Masons & Tuckpointers Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Cold Applied Waterproofing Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $21 and $38.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Tallahassee, Florida
Posted: 2025-12-11 14:09:15
-
JOB DESCRIPTION
WE WILL TRAIN YOU! NOW HIRING IN MULTIPLE LOCATIONS!
The Commercial Façade Field Technician actively performs and enforces Company safety policy and program to minimize accidents affecting employees, the public, and property.
They will be responsible for attending safety meetings, complying with governmental regulations, reporting, and investigating accidents, and planning site-specific job safety procedures including:
$21-38/hour (not including prevailing wage)
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Attend and understand daily onsite safety brief prior to the start of the WTI project.
Inspect and ensure safety of surroundings, equipment and tools and identify and discuss any safety concerns.
Execution of project tasks with knowledge of expected production rates, ensuring tools and materials are used safely and efficiently to complete the assigned project. Complete the project per the scope or work, design and specification of contract & engineering documents as directed by foreman.
Responsible to aid foreman in tracking and monitoring project inventory. Maintains highest quality on-site customer relations in projecting positive image. Has knowledge/understanding and performs work in compliance with all governmental rules and regulations affecting work sites and employees, i.e.
OSHA, DOT, EEO/Affirmative Action, EPA, etc. Provides management with earliest possible notification of real and potential job problems. Accepts responsibility for the care, custody, and use of company equipment, material, tools, and other assets as assigned by the WTI Commercial Foreman. Understands and executes proper material and equipment usage, maintenance, and storage. Perform any other duty and/or project as required or assigned by the WTI Foreman and/or Commercial Business Manager. Maintains ethical business conduct.
Job Requirements:
Masons & Tuckpointers Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Cold Applied Waterproofing Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $21 and $38.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Gainesville, Florida
Posted: 2025-12-11 14:09:05
-
JOB DESCRIPTION
WE WILL TRAIN YOU! NOW HIRING IN MULTIPLE LOCATIONS!
The Commercial Façade Field Technician actively performs and enforces Company safety policy and program to minimize accidents affecting employees, the public, and property.
They will be responsible for attending safety meetings, complying with governmental regulations, reporting, and investigating accidents, and planning site-specific job safety procedures including:
$21-38/hour (not including prevailing wage)
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Attend and understand daily onsite safety brief prior to the start of the WTI project.
Inspect and ensure safety of surroundings, equipment and tools and identify and discuss any safety concerns.
Execution of project tasks with knowledge of expected production rates, ensuring tools and materials are used safely and efficiently to complete the assigned project. Complete the project per the scope or work, design and specification of contract & engineering documents as directed by foreman.
Responsible to aid foreman in tracking and monitoring project inventory. Maintains highest quality on-site customer relations in projecting positive image. Has knowledge/understanding and performs work in compliance with all governmental rules and regulations affecting work sites and employees, i.e.
OSHA, DOT, EEO/Affirmative Action, EPA, etc. Provides management with earliest possible notification of real and potential job problems. Accepts responsibility for the care, custody, and use of company equipment, material, tools, and other assets as assigned by the WTI Commercial Foreman. Understands and executes proper material and equipment usage, maintenance, and storage. Perform any other duty and/or project as required or assigned by the WTI Foreman and/or Commercial Business Manager. Maintains ethical business conduct.
Job Requirements:
Masons & Tuckpointers Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Cold Applied Waterproofing Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $21 and $38.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Tallahassee, Florida
Posted: 2025-12-11 14:08:15
-
Lead Solar ElectricianKent£40,000 - £50,000 + (OTE £45,000- £55,000) Van + Fuel Card + Stay Away Expensed + Pension + Holidays + Good Reputation + Stability + January Start Are you an electrician looking for a role where you'll be genuinely supported and valued from day one? Join a stable, growing company with a consistent workload.
This is your opportunity to become part of a company that cares about its installers and ensures they are the best they can be.
In this role you will travel around the South of England installing solar panels for a variety of customers.
You'll receive ongoing training opportunities to ensure you deliver to the best of your abilities.
If you're an electrician, this is a chance to join a supportive company that believes in doing a job to the highest standard working on good renewable energy products.
This Solar Electrician Role Will Include:
* Being proactive and having the ability to work with other trades on site.
* Building mounting boards, cutting cables, installing the solar panels.
* Leading installations throughout the South of England
The Ideal Solar Electrician Will Need:
* Have NVQ 3 in an electrical field.
* Have 18th edition
* Have CSCS
* Have a clean, full, manual driving licence
* Be comfortable with heights!
Apply now or call Lily on 07458 163045 for immediate consideration! Keywords: Electrician, Electrical Engineer, Technician, Maintenance, Installation, Industrial, Domestic, Commercial, Approved, Qualified Supervisor (QS), Test and Inspection, 2391 Test Engineer, Service Engineer, Mobile, Field, LV, HV, Control Panel, Fitter, Improver, Mate, Construction, Facilities, Building Services, Fixed Wire Testing Engineer This vacancy is being advertised by Future Engineering Recruitment Ltd.
The services of Future Engineering Recruitment Ltd are those of an Employment Agency.
Please visit our website to view other positions we are currently handling.
Future Engineering Recruitment Ltd can only accept applications from candidates with a valid legal permit or right to work in the United Kingdom.
Candidates who do not have this right, or are awaiting approval, should not apply. ....Read more...
Type: Permanent Location: Orpington, England
Start: January
Salary / Rate: £40000 - £50000 per annum + Stability + Good Reputation + Van
Posted: 2025-12-11 13:51:24
-
Field Service EngineerBedfordshire£37,000 - £42,000 (OTE £52,000 - £55,000 ) + Van + Fuel Card + Call Out + Stay Away Expensed + Training + Good Reputation + Stability + Immediate StartAre you a skilled field service engineer looking for a role where you'll be genuinely supported and valued from day one? Join a stable, growing company with a consistent workload.
This is your opportunity to become part of a company that cares about its engineers and knows how important they are to the business.
They have a company-wide bonus scheme, summer awards and other work-events to show their appreciation and celebrate their staff.
In this role you will travel around the South of England servicing generators for a variety of customers.
You'll receive ongoing training opportunities to ensure you deliver to the best of your abilities, with the opportunities for additional courses.
If you're an experienced Field Service Engineer, this is a chance to join a supportive, growing organisation where your skills are recognised and you matter.
This Field Service Engineer Role Will Include:
* Call outs and travel around the South of England
* Carrying out routine generator servicing, preventative maintenance, inspections and load bank testing.
* Using diagnostic tools to identify problems and correct them.
The Ideal Field Service Engineer Will Have:
* NVQ 3/ BTEC in a mechanical field or relevant experience
* Full UK driving licence
* DBS check or be willing to have one.
Apply now or call Lily on 07458 163045 for immediate consideration!Keywords: Service Engineer, Generator Engineer, UPS Engineer, Electrical or Mechanical Service Engineer, Field Technician, Mobile Service Technician, Maintenance Engineer, Commissioning Engineer, Installation Engineer, Breakdown Engineer, Technical Support Engineer (Field-Based), Critical Power Engineer, Standby Power Engineer, Electromechanical Engineer, Service & Repair Engineer, Power Generation Engineer, Field Maintenance Technician, and Site Service Engineer, Field service engineer, service technician, mechanical engineer, generator engineer, mechanical-electrical engineer, mechanic, diagnostics, generator, UPS, engines, electrical panels, motors, Ex-forces, Ex-army, Ex-navy, Ex-RAF, Ex-marines.This vacancy is being advertised by Future Engineering Recruitment Ltd.
The services of Future Engineering Recruitment Ltd are those of an Employment Agency.Please visit our website at futureengineer.co.uk to view other positions we are currently handling.Future Engineering Recruitment Ltd can only accept applications from candidates with a valid legal permit or right to work in the United Kingdom.
Candidates who do not have this right, or are awaiting approval, should not apply. ....Read more...
Type: Permanent Location: Bedfordshire, England
Start: ASAP
Salary / Rate: £37000 - £42000 per annum + Good Reputation + Stability + Van
Posted: 2025-12-11 12:25:25
-
Technician ideally with hands-on equipment assembly experience required to assemble equipment and conduct quality assurance checks.
A familiarity with electronics or mechanical tool usage is highly desirable.
Key skills
Experience with mechanical tools and understanding of engineering drawings
Electronics knowledge
Responsibilities
Soldering
SMT/SMD
CAD programs
Quality Management practices
Microsoft Access and databases
Type: Permanent Location: Sheffield, England
Start: ASAP
Duration: Permanent
Salary / Rate: £26000 - £42000 Per Annum None
Posted: 2025-12-11 10:27:55
-
Job Title: Vehicle Technician
Location: Exeter
Salary: £29,886 - £34,187 (Basic) + OTE £3,600 - £5,800 per year (Uncapped Bonus)
Job Type: Full-Time, Permanent
Hours: 44 hours per week, 5 days a week
ð Join the UKs Largest Automotive Service Provider: We are partnering with the UKs largest automotive service, maintenance, and repair business to find an experienced Vehicle Technician for their Exeter service centre.
This is an exciting opportunity to work in a dynamic and supportive team, offering uncapped bonus potential and great career growth opportunities.
ð¼ What We Offer:
- Basic Salary: £29,886 - £34,187 (depending on experience).
- OTE: £3,600 - £5,800 (Uncapped Bonus).
- Annual Leave: 5.6 weeks.
- Discounts: Up to 50% off garage bills and 25% off most products in our retail stores.
- Discounts on groceries, shopping, insurance, days out, restaurants, and more.
- Family & Friends Discount Events.
- Financial Planning Support via Wagestream (access up to 30% of your salary in advance).
- GP Access 24/7, 364 days a year.
- Health Cash Plan to claim back healthcare costs.
- Pension Scheme & Life Assurance.
- Join the Share Save Scheme with a 20% discount on shares.
ð§ Role Responsibilities:
- Carry out maintenance, servicing, and repairs on a range of vehicles.
- Perform more complex tasks such as clutch replacements, timing belt changes, and diagnostics in areas like vehicle electrics, brake systems, and steering & suspension.
- Support a team of skilled technicians and fitters while working alongside customer service advisors for a seamless customer experience.
- Work efficiently with the support of a workshop controller to meet time and quality standards.
â
About You:
- NVQ Level 3 (or equivalent) in Vehicle Maintenance and Repair.
- Full UK Drivers License with no more than 9 points.
- Experienced Technician/Mechanic with strong diagnostic skills (brakes, suspension, engine) and the ability to carry out complex repairs (e.g., diesel injectors, head gaskets, electrical components).
ð© Interested? If you\'re looking for an exciting new challenge, click to apply or contact Rachael Mortimer on 07885 881841 or email rachael.mortimer@holtrecruitment.com for more information.
Holt Recruitment is a leading recruitment agency specializing in the Automotive, Motor Trade, Engineering, OEM, and related industries.
We are recruiting across the UK for various roles, including Vehicle Technicians, Vehicle Mechanics, Diagnostic Technicians, Senior Technicians, Master Technicians, and more. ....Read more...
Type: Permanent Location: Exeter,England
Start: 11/12/2025
Salary / Rate: £29000 - £40000 per annum, Benefits: Bonus
Posted: 2025-12-11 08:54:04
-
Body Repair Person
£37,344.84 per annum (37-hour week)
Monday to Friday, Day Shifts
Are you an experienced Body Repair Technician looking for a stable, long-term role with excellent pay and a great work-life balance? Join a well-established engineering team in Huddersfield, carrying out high-quality body repairs and refinishing work on a modern fleet of large passenger vehicles.
The Role
- Carrying out bodywork repairs on large commercial vehicles, including panel replacement, welding, filling, and painting.
- Repairing accident damage and restoring vehicles to the highest standard.
- Working with modern materials and repair techniques.
- Ensuring all work meets safety and quality standards.
- Collaborating with the engineering and paint teams to keep vehicles road-ready and looking their best.
What Youll Need
- Proven experience in body repair, panel beating, or vehicle refinishing.
- Knowledge of large vehicle or commercial bodywork (HGV, LGV, or PSV experience desirable).
- Relevant qualifications (NVQ Level 3 or equivalent) preferred.
- A good eye for detail and pride in your workmanship.
- Ability to work independently and as part of a skilled team.
What We Offer
- £37,344.84 per year (37-hour week)
- Monday to Friday day shifts only
- Excellent working conditions in a fully equipped workshop.
- Supportive team environment with opportunities for progression.
- Contributory pension scheme and generous holiday entitlement.
Join a respected engineering team where your skills will help keep a vital fleet in top condition.
Location: Huddersfield
Contract: Permanent, full-time
Please apply now submit your CV to Niki.birrell@holtautomotive.co.uk
Or call 07485 986174 to find out more. ....Read more...
Type: Permanent Location: Huddersfield,England
Start: 10/12/2025
Salary / Rate: £37344 per annum
Posted: 2025-12-10 15:31:04
-
Job Title: Bus Driver
Location: Guernsey, Channel Islands
Hourly Rate: £17.74 per hour + Overtime (£21.30 per hour)
Hours: 40 hours per week
Employer-subsidised accommodation available on the Island
Are you an experienced and confident Bus Driver looking for a fresh adventure? Join our team in the stunning Channel Island of Guernsey, where youll enjoy scenic coastal routes, friendly passengers, and a unique lifestyle that only island living can offer.
We are looking for skilled drivers who are comfortable navigating narrow country lanes, adapting quickly to local environments, and delivering excellent customer service on every journey.
Enjoy Guernseys beautiful coastline, historic landmarks, and relaxed lifestyle
Key Responsibilities of the Bus Driver:
- Safely operate buses across a variety of scheduled routes
- Navigate narrow, rural roads with confidence
- Provide excellent customer service to both residents and visitors
- Ensure vehicles are operated in line with safety procedures and company standards
- Carry out basic daily vehicle checks
- Maintain punctuality, professionalism, and high driving standards
Requirements of the Bus Driver:
- Valid PCV licence and CPC
- Previous Bus Driver experience (country or rural road driving beneficial)
- Strong customer service skills
- Ability to adapt to new routes and environments
- Reliable, professional, and safety-focused
If you are interested in a change as a Bus Driver and you would like to enjoy a more temperate climate, while earning more money after tax, then please apply today
Holt Recruitment are a leading Recruitment agency specialising in Automotive, Motor trade, Engineering, OEM and various related industries.
We are recruiting across the UK for Vehicle Technician, Vehicle Mechanic, Commercial Vehicle Technician, Diagnostic Technician, Senior Technician, Master Technician, Mobile Vehicle Technician, PDI Technician, Prep Technician, MOT Tester, Fast Fit Technician, LCV Technician, Light Commercial Technician, HGV Technician, Bus Technician, LGV Technician, HGV Engineer, HGV Mechanic, HGV Fitter
Holt Recruitment cover a variety of different sectors including Technical, Mechanical, Engineering, Sales, Service, Aftersales, Bodyshop, Fleet & Rental Management, Accounts, Finance, Marketing, & Payroll, Managerial, Logistics, Parts, Administration, Call Centre / Contact Centre, Senior Appointments, Head Office Positions and Confidential Appointments
DP ....Read more...
Type: Permanent Location: Cardiff,Wales
Start: 10/12/2025
Salary / Rate: £36890 - £42000 per annum
Posted: 2025-12-10 15:07:08
-
We are looking for a skilled Manufacturing Technician to join our growing production team, supporting the build of equipment used in cutting-edge marine and subsea environments.
This is a hands-on role ideal for someone with strong electronics assembly and wiring experience.
Key Responsibilities
Operate micro CNC machinery for precision component production
Solder PCBs and electronic circuitry to a high standard
Build and assemble wiring looms and cable harnesses
Follow manufacturing procedures, technical drawings, and circuit diagrams
Carry out PAT testing and quality inspections on circuitry and cables
Ensure all products meet strict quality and safety standards
Key Skills
Proven experience in electronic assembly or manufacturing
Strong PCB soldering and wiring skills
Ability to read and interpret circuit diagrams and engineering drawings
Experience with micro CNC machines (desirable)
High attention to detail and commitment to quality ....Read more...
Type: Permanent Location: Barrow-in-Furness, England
Start: ASAP
Duration: Temp-to-Perm
Salary / Rate: £30000 - £42000 Per Annum None
Posted: 2025-12-10 10:35:41
-
Field Service Engineer
Doncaster
£40,000 - £42,000 Basic + (OTE £50,000) + Overtime + Technical Progression + Career Development + Full Training + Company Vehicle & Fuel Card (Personal Use Included) + 3-Day Week + Door-to-Door Pay + Excellent Benefits Package
Take your career to the next level with a global, market-leading manufacturer as a Field Service Engineer.
This is an exceptional opportunity to join a company committed to developing its engineers through industry-leading training, continuous technical progression, and genuine long-term career prospects.
You will receive comprehensive training from a rapidly expanding organisation that will invest heavily in your professional growth, enabling you to work confidently across a wide range of equipment and environments.
Maximise your earning potential through overtime and premium-rate callouts, with realistic OTE of £50,000.
This specialist manufacturer provides advanced chemical and water treatment solutions, supplying chlorine dioxide technology worldwide.
Due to ongoing growth and increasing demand, they are expanding their field service and water treatment engineering team.
Join now and secure the opportunity to earn well through premium-rate overtime, while benefiting from exceptional technical training and continuous progression.
The Role Of The Field Service Engineer Will Include:
* Field service engineer role - Full product training given - Water Treatment Industry
* Service and installation of company equipment
* Carry out various electrical engineering and pipework tasks
* UK wide cover field service engineer role
The Successful Field Service Engineer Will Have:
* Strong electrical engineering or plumbing / pipework skills
* Strong desire or interest to work in the water treatment industry.
* Background as a maintenance / field service engineer / technician (or similar)
* Ex-forces engineers welcomed
* Live around the Doncaster area and willing to travel UK wide
Please apply or contact Rebecka for immediate consideration
Keywords: Field service engineer, service engineer, maintenance engineer, mobile engineer, field engineer, field service, electrical, pipework, water treatment,, REME, Army, Ex forces, Navy, RAF, Doncaster, rotherham, sheffield, scunthorpe, worksop.
This vacancy is being advertised by Future Engineering Recruitment Ltd.
The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.
Potential candidates who do not have this right or ....Read more...
Type: Permanent Location: Doncaster, England
Start: ASAP
Duration: perm
Salary / Rate: £40000 - £42000 per annum + + Overtime (OTE £50,000) + Training
Posted: 2025-12-10 09:49:35
-
Mechanical or Electrical assemblers required.
£18.90 per hour, Three-day weekends, 33 holidays and a 10% pension scheme are a few of the perks you can expect to receive working out of this state-of-the-art facility.
Due to recent growth and acquisitions.
This organisation is now in the process of introducing a new product line, which will create exponential growth and entry into brand new markets.
The company offers long-term stability, with work secured and forecasted years in advance.
We are interested in speaking to any of the following: Mechanical Assemblers, Mechanical fitters, Electrical assemblers, panel wirers, maintenance engineers, vehicle technicians
Mechanical Assembler Requirements:
No formal qualifications within engineering required
Previous experience in Fitting or Assembly is essential, ideally within an engineering/manufacturing environment.
The ability to read, interpret and work directly from engineering drawings
Working Hours of the Mechanical Assembler:
Week 1: Monday to Friday - 06:00 to 14:00 (37.5 hours per week) £15.14 per hour
Week 2: Monday to Thursday - 12:30 to 22:00 (36 hours per week) £18.90 per hour
Please note, a driving license would be a distinct advantage due to the early start time and local transport links.
In return, the Mechanical Assembler will receive:
Annual Salary: £32,400 (inclusive of shift allowance)
Generous overtime paid at premium rates
Holiday Entitlement: 33 Days including bank holidays
Pension Scheme: 10% Combined contribution
Various other benefits including: Paid breaks, 3x annual salary death in service, cycle to work scheme and frequent companywide social events
This employer is based in LEEDS, meaning that the successful will easily be able to commute from surrounding towns and cities including Bradford, Dewsbury, Huddersfield, Halifax, Wakefield, Castleford, Pontefract, Bingley and Keighley.
To apply for the Mechanical Assembler role, please click “Apply Now” and attach an updated copy of your CV.
Alternatively, please contact Conor Wood at E3 Recruitment for more information ....Read more...
Type: Permanent Location: Bradford, England
Start: ASAP
Salary / Rate: £15.14 - £18.90 per hour + Generous overtime 33 Holidays + 10% Pension
Posted: 2025-12-10 09:46:40
-
Maintenance Technician Location: Poole
Salary: Competitive pay
Shifts: Double Days (rotating)
Holt Engineering is working with a well-established manufacturing business looking to strengthen its maintenance team with an experienced Maintenance Technician.
This is a solid opportunity for someone who takes pride in keeping CNC machinery running at its best and wants to be part of a well-organised, forward-thinking production environment.
The Role
As a Maintenance Technician, youll take ownership of keeping all plant and CNC equipment in top condition.
Youll be:
- Carrying out planned preventive maintenance (PPM) and reactive repairs.
- Diagnosing and fixing faults on CNC machinery and wider production kit.
- Supporting continuous improvement work to boost reliability and uptime.
- Getting involved in machinery upgrades and process improvements.
- Ensuring all work meets health & safety standards.
- Working closely with production teams to minimise downtime and keep output steady.
About You
To succeed as a Maintenance Technician, youll need:
- Proven hands-on experience maintaining and repairing CNC machinery essential.
- A recognised qualification in Mechanical or Electrical Engineering (Apprenticeship, NVQ, City & Guilds, or equivalent).
- Strong fault-finding ability across electrical and mechanical systems.
- Previous maintenance experience in a manufacturing or engineering environment.
- A proactive approach with solid problem-solving skills and clear communication.
- Willingness to work on a rotating Double Days shift pattern.
Whats on Offer
- Competitive pay with overtime available.
- A supportive, team-driven culture within a stable, growing company.
- Ongoing training and development to keep your skills sharp.
If youre a skilled Maintenance Technician who enjoys getting stuck into CNC machinery maintenance and wants a role with long-term stability and variety, wed like to hear from you.
Apply today or get in touch with Kate Taylor at Holt Engineering for more details. ....Read more...
Type: Permanent Location: Poole,England
Start: 10/12/2025
Salary / Rate: £1 - £100000 per annum
Posted: 2025-12-10 08:16:04
-
JOB DESCRIPTION
WE WILL TRAIN YOU! NOW HIRING IN MULTIPLE LOCATIONS!
The Commercial Façade Field Technician actively performs and enforces Company safety policy and program to minimize accidents affecting employees, the public, and property.
They will be responsible for attending safety meetings, complying with governmental regulations, reporting, and investigating accidents, and planning site-specific job safety procedures including:
$21-38/hour (not including prevailing wage)
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Attend and understand daily onsite safety brief prior to the start of the WTI project.
Inspect and ensure safety of surroundings, equipment and tools and identify and discuss any safety concerns.
Execution of project tasks with knowledge of expected production rates, ensuring tools and materials are used safely and efficiently to complete the assigned project. Complete the project per the scope or work, design and specification of contract & engineering documents as directed by foreman.
Responsible to aid foreman in tracking and monitoring project inventory. Maintains highest quality on-site customer relations in projecting positive image. Has knowledge/understanding and performs work in compliance with all governmental rules and regulations affecting work sites and employees, i.e.
OSHA, DOT, EEO/Affirmative Action, EPA, etc. Provides management with earliest possible notification of real and potential job problems. Accepts responsibility for the care, custody, and use of company equipment, material, tools, and other assets as assigned by the WTI Commercial Foreman. Understands and executes proper material and equipment usage, maintenance, and storage. Perform any other duty and/or project as required or assigned by the WTI Foreman and/or Commercial Business Manager. Maintains ethical business conduct.
Job Requirements:
Masons & Tuckpointers Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Cold Applied Waterproofing Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $21 and $38.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Jacksonville, Florida
Posted: 2025-12-10 06:08:06
-
JOB DESCRIPTION
WE WILL TRAIN YOU! NOW HIRING IN MULTIPLE LOCATIONS!
The Commercial Façade Field Technician actively performs and enforces Company safety policy and program to minimize accidents affecting employees, the public, and property.
They will be responsible for attending safety meetings, complying with governmental regulations, reporting, and investigating accidents, and planning site-specific job safety procedures including:
$21-38/hour (not including prevailing wage)
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Attend and understand daily onsite safety brief prior to the start of the WTI project.
Inspect and ensure safety of surroundings, equipment and tools and identify and discuss any safety concerns.
Execution of project tasks with knowledge of expected production rates, ensuring tools and materials are used safely and efficiently to complete the assigned project. Complete the project per the scope or work, design and specification of contract & engineering documents as directed by foreman.
Responsible to aid foreman in tracking and monitoring project inventory. Maintains highest quality on-site customer relations in projecting positive image. Has knowledge/understanding and performs work in compliance with all governmental rules and regulations affecting work sites and employees, i.e.
OSHA, DOT, EEO/Affirmative Action, EPA, etc. Provides management with earliest possible notification of real and potential job problems. Accepts responsibility for the care, custody, and use of company equipment, material, tools, and other assets as assigned by the WTI Commercial Foreman. Understands and executes proper material and equipment usage, maintenance, and storage. Perform any other duty and/or project as required or assigned by the WTI Foreman and/or Commercial Business Manager. Maintains ethical business conduct.
Job Requirements:
Masons & Tuckpointers Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Cold Applied Waterproofing Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $21 and $38.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Jacksonville, Florida
Posted: 2025-12-10 06:07:57
-
CNC Miller, Programmer, Setter, Operator - 5-axis Automation
Are you an experienced small to medium batch CNC 5-axis Miller Programmer, Setter, Operator, ideally with some multi-pallet experience?
Do you have a passion for precision engineering and a commitment to excellence?
Do you thrive in a dynamic team environment and want to work for a company where your contributions make a real difference?
Join Penta, where our Core Target is to be the engineering company everyone wants to work for and buy from!
As a CNC Miller, Programmer, Setter, Operator in our 5-axis automation team, you'll collaborate closely with our teammates to consistently deliver high-quality components.
You'll be responsible for maximising machining efficiency and utilisation, embracing continuous improvement to enhance production flow and quality outcomes.
Key Responsibilities
, Program, Set, and Operate 5-axis, automated, multi-pallet CNC Milling Machines using Fusion 360 CAD/CAM software: Independently devise work holding, working methods, and machining processes for small to medium batch production., Adhere to standardised procedures: Follow programming, tooling, and filing procedures., Consistently produce high-quality components: Achieve "right first time" first-offs., Beat planned card times securely: Strive to shorten expected production times with robust methods., Improve machining methods: Continually test and refine methods without compromising stability and a consistent quality outcome., Identify and address Issues: Embrace opportunities for improvement.
About Penta
Founded in 1998 by five engineers, Penta has grown into a trusted partner for aerospace, defence, medical, marine and scientific industries.
At Penta, we believe that a business is only as strong as its people.
We emphasise healthy, smart, and aligned teamwork to create the best work-life experience for our employees.
Guided by our Core Values, business plan (V/TO), Flywheel, and lean principles, we are committed to eliminating inefficiencies and adding value at every step.
We seek team members who are not only skilled technicians but also excellent communicators and collaborators.
Penta's strength lies in our disciplined approach, engaging in thoughtful debate, and taking action in the best interests of the company and our team.
Our ideal candidate is flexible, has a positive attitude, and strives for continuous improvement both personally and professionally.
We foster a work environment where work is enjoyable for all, and we are dedicated to the development and well-being of our team.
Interested in progressing your career as a CNC Miller? Join Penta and be part of a dedicated and innovative team.
Apply today. ....Read more...
Type: Permanent Location: Fareham, England
Start: ASAP
Salary / Rate: £42000.00 - £54000.00 per annum
Posted: 2025-12-09 16:50:18
-
Position: Engineering Project Manager – Bridge Surveyor (Survey & Inspection)
Job ID: 3494/2
Location: [Insert location]
Rate/Salary: £40,000
Type: Permanent
HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Maritime Shipping, Energy and Subsea sectors – visit: www.hsbtechnical.com for a list of our vacancies.
We have a number of permanent and contract vacancies for multiple businesses across the UK and overseas.
The below job description will outline this position of: Engineering Project Manager – Bridge Surveyor (Survey & Inspection)
Typically, this person will plan, manage, and deliver bridge survey and inspection projects from initial instruction to completion, ensuring compliance with client requirements, industry standards, and health & safety regulations.
They will oversee technical documentation, site operations, and supervise teams and subcontractors during surveys and inspections.
HSB Technical’s client is an established and well-regarded business entity.
Duties and responsibilities of the Engineering Project Manager – Bridge Surveyor (Survey & Inspection):
Project Planning & Coordination
Plan, prepare, and manage bridge survey and inspection activities from initial instruction through to delivery.
Review client specifications, railway standards (e.g., STE7), and relevant technical documentation to ensure full understanding of scope.
Develop work packs including survey briefs, inspection schedules, and resource plans.
Provide technical input into pricing, bid preparation, and programme development.
Technical Documentation & Reporting
Produce accurate Risk Assessments & Method Statements (RAMS) tailored to bridge structures, access methods, and traffic/railway constraints.
Compile detailed technical reports including defect descriptions, condition ratings, measurements, and photographic evidence.
Prepare CAD drawings, structural sketches, survey plans, and digital models to support engineering assessments.
Ensure documentation meets client requirements, industry standards, and internal quality procedures.
Administrative & Compliance Duties
Maintain accurate project records, inspection logs, and asset data in line with rail and highway asset management systems.
Support quality assurance processes and ensure compliance with health, safety, environmental, and railway/highway standards.
Coordinate with planners, rail possession teams, and highway authorities to secure permits, track access, and traffic management arrangements.
Site-Based Responsibilities
Bridge Survey & Inspection Activities
Carry out general, principal, special, underwater, and confined space bridge inspections.
Collect, record, and interpret survey data, including structural measurements, GPS/topographic data, underwater/bathymetric data, defect mapping, and photographic/video evidence.
Ensure all data is collected to required precision, accuracy, and client specifications.
Rail & Highway Operational Responsibilities
Work safely within rail possessions, line blockages, and under traffic management systems.
Coordinate with Controller of Site Safety (COSS), Lookouts, and Traffic Safety Control Officers (TSCOs).
Ensure plant, equipment, and access/egress routes are set up safely and in line with standards.
Supervision & Team Leadership
Act as Site/Job Supervisor when required, leading small teams during inspections and surveys.
Oversee and mentor junior surveyors/inspectors, ensuring safe and effective work practices.
Manage subcontractors and specialist teams including diving units, rope access technicians, and confined space specialists.
Specialist Operations (as qualified)
Undertake confined space entry and supervision for culverts, tunnels, and substructure chambers.
Conduct underwater bridge inspections and diving operations in accordance with HSE Inshore regulations.
Perform swift-water and flood-risk operations for scour assessments and emergency inspections.
Operate in complex or hazardous environments including high-level structures, tidal areas, and remote locations.
Key Deliverables
Accurate, high-quality bridge inspection reports, CAD drawings, and survey outputs delivered on time.
Compliant execution of rail and highway works, including possession/traffic management adherence and safe system of work deployment.
Effective communication with clients, asset owners, and project stakeholders.
Consistent delivery in line with internal quality systems, industry standards, and regulatory requirements.
Qualifications and requirements for the Engineering Project Manager – Bridge Surveyor (Survey & Inspection):
Proven experience in bridge survey, inspection, and engineering project management.
Competence in rail and highway operational safety, traffic management, and possession coordination.
Experience producing technical reports, CAD drawings, and survey documentation.
Relevant qualifications in civil/structural engineering, surveying, or equivalent.
Confined space and underwater inspection certifications (desirable).
This vacancy is being advertised by HSB Technical Ltd who have been appointed to act as a recruitment partner for this role. ....Read more...
Type: Permanent Location: Hull, England
Start: January 2026
Duration: Perm
Salary / Rate: £38000 - £40000 Per Annum
Posted: 2025-12-09 16:06:45
-
Mechanical Technician required to produce and assemble components including conduct tests, measurements, operations and process controls as part of a marine assembly systems manufacturing team.
The ideal candidate will have precision engineering maritime or aerospace production experience reading blueprints to identify components, perform production assembly, test and repair.
Requirements
Manufacturing experience in comparable high value low volume environment, ideally maritime, subsea or aerospace.
Mechanical production using hand tools, automated machines and assemblies.
Quality processes understanding, assembly, test, troubleshoot, repair, test.
Other relevant skills include:
Wire preparation, strip, crimp and termination.
Manufacturing Systems tools maintenance and harness repair.
Hydraulic machine operation and programming.
Continuous improvement.
Responsibilities
Mechanical assembly of precision engineers high value projects.
Prosecute test techniques as per cell procedure.
Work from bill of materials, job packets, routings, work orders, wire lists and quality procedures.
Evaluate, repair and maintain production tooling and equipment. ....Read more...
Type: Contract Location: Barrow-in-Furness, England
Start: ASAP
Duration: Temp-to-Perm
Salary / Rate: £17 - £19 Per Annum None
Posted: 2025-12-09 15:32:03
-
Electrical Technician role paying £23 per hour, providing LTD company and CIS opportunities.
The role is working for a world leading Chemical Manufacturer based in the Bradford area.
The role offers free onsite parking which provides easy commutes from surrounding areas such as Huddersfield, Dewsbury, Mirfield, Birstall and Brighouse.
Key Information for the Electrical Technician:
£23 Per Hour (Ltd Company or CIS)
Monday - Friday Days (39 hours per week)
Working 7am - 3.30pm
30pm Finish on a Friday
Who Will You Be Working For?
The business are a leader in the UK in the full turnkey delivery of CAPEX Projects.
They specialise within the design, manufacture and installation of bespoke projects to their many clients across the UK.
They cover projects across industries within Chemical, Pharmaceutical, Food & Beverage and Industrial Manufacturing.
The role of Electrical Technician
This hands-on role involves performing a wide range of electrical maintenance activities, including fault finding, breakdown response, and planned preventive maintenance (PPM).
You will ensure the safe, reliable, and compliant operation of electrical systems across the site's production, utilities, and storage areas.
Working within a high-hazard environment, you will play a key part in maintaining safety, operational performance, and adherence to regulatory standards.
Carry out reactive maintenance, fault diagnosis, and repair of electrical equipment and systems across the site.
Perform planned preventive maintenance (PPMs) to maximise equipment reliability and minimise downtime.
Work safely and effectively within an upper-tier COMAH environment, following all site safety procedures, permits-to-work, and risk controls.
Install, test, inspect, and maintain electrical systems, including motors, control panels, instrumentation interfaces, and plant services.
Support continuous improvement activities, contributing to equipment upgrades, modifications, and reliability initiatives.
I am keen to speak to anyone with the following experience:
Skills and Experience Needed of the Electrical Technician:
Prior experience as an Electrical Technician in a chemical, manufacturing, or heavy industrial environment.
Strong understanding of electrical maintenance within high-hazard or safety-critical settings (COMAH experience desirable but not essential if similar experience is held).
18th Edition Wiring Regulations qualification (essential).
NVQ Level 3 in Electrical Engineering or equivalent vocational qualification (essential).
Competent in fault finding on complex electrical systems and control equipment.
How to Apply: To apply for the role of Electrical Technician, please submit your CV for review.
Alternatively, please reach out to Toni-Marie Monks at E3 Recruitment.
....Read more...
Type: Contract Location: Bradford, England
Start: ASAP
Salary / Rate: Up to £23 per hour + 1.30pm Finish on a Friday!
Posted: 2025-12-09 13:51:56
-
Field Service Engineer
Rotherham
£35,000 - £40,000 Basic + (£50,000 OTE) + Overtime + Training + Job satisfaction + Stability + Door To Door + Company Vehicle + Package
Are you seeking genuine job satisfaction, long-term stability, and the chance to be part of a tight-knit team that appreciates your hard work? This is a fantastic opportunity for a Field Service Engineer to join a well-established business where you're recognised as a key contributor, not just another number.
Enjoy a varied and challenging role within a recession-proof industry, with UK-wide travel and the support of a company that invests heavily in its engineers.
This long-standing manufacturer has a strong reputation in the industrial machinery sector and continues to grow year after year.
They are now looking for a motivated Field Service Engineer who wants to be part of a collaborative, highly skilled team that works closely together to solve technical challenges.
Expect excellent training, supportive colleagues, and a role where your expertise directly contributes to the company's success.
Your role as a Field Service Engineer will include:
* Field Service Engineer Role - Covering Leicester to Leeds
* Fault finding and repairing a range of automation machines
* Installation of new machines
The successful Field Service Engineer will have:
* Mechanical/ electrical maintenance background (machine tooling preferred e.g sheet metal)
* Full UK Licence
* Ability To Cover Rotherham Patch
If interested in this role please contact: Becka 07458163046 for an immediate consideration
Keywords: field service engineer, cnc field service engineer, service engineer, field service engineer technician, multiskilled engineer, field engineer, field technician, service technician, Sheffield, Leeds, Nottingham, Chesterfield, Doncaster, Wakefield, Barnsley, Huddersfield, Rotherham,Leicester
This vacancy is being advertised by Future Engineering Recruitment Ltd.
The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Future Engineering Recruitment Ltd is that of an Employment Agency.
Please visit our website to view other positions we are currently handling.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.
Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed. ....Read more...
Type: Permanent Location: Rotherham, England
Start: ASAP
Duration: perm
Salary / Rate: £35000 - £40000 per annum + Training + Stability + Work life balance
Posted: 2025-12-09 10:46:17
