-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and offers constructive criticisms relative to variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Consult with Main Lab chemist on products more than 10% out of product specifications Upon approval of product record data onto Quality Control car and enter information into computer data base Consult QC manual for specific requirements for product analysis of production batches and customers special requirements Calibrate QC equipment as required Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude. Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-08-04 15:11:42
-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and offers constructive criticisms relative to variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Consult with Main Lab chemist on products more than 10% out of product specifications Upon approval of product record data onto Quality Control car and enter information into computer data base Consult QC manual for specific requirements for product analysis of production batches and customers special requirements Calibrate QC equipment as required Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude. Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-08-04 15:11:42
-
JOB DESCRIPTION
GENERAL SUMMARY
Make all intermediates and finished products by adding specific quantities of certain raw materials and/or intermediates to a batch tank or grinding mill according to a written formula using proper batch making techniques and safe methods.
This position also requires application and monitoring of established quality procedures and methods for production batches.
Compiles, tabulates and summarizes QC data for analysis.
Prepares and offers constructive criticisms relative to variables and deviations from prescribed standards of quality.
Maintains statistical records having to do with quality, nature and causes of defects.
Expedites and follows up changes to allow for prescribed quality standards.
Request raw materials for use in formulas.
Position requires knowledge of batch making techniques, machinery operation, scales and meter use, and formula knowledge.
PRINCIPLE DUTIES & RESPONSIBILITIES include the following.
Other duties may be assigned. Weigh and/or measure out quantities of solvents, resins, pigments (or dispersions), and additives into blending tanks or grinding mills according to a batch ticket. Tend mixing or grinding equipment and maintain control over time, heat, mix speed, etc. Upon batch completion, take product sample to QC Lab for QC checks. Check production batches by comparison to standards Make adjustments to batch as necessary Recheck batch after adjustments are made until product is within standard product specifications Use proper analytical tools to compare product to standard specs and to wet and/or dry samples Record results of comparison and record onto batch card Consult with Main Lab chemist on products more than 10% out of product specifications Upon approval of product record data onto Quality Control car and enter information into computer data base Consult QC manual for specific requirements for product analysis of production batches and customers special requirements Calibrate QC equipment as required Other duties as assigned by supervisor/manager Maintain work area in a neat and orderly fashion.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Experience and Education
No previous experience required Experience in Manufacturing, Filling Area strongly preferred
Specific Knowledge, Skills, and Abilities Required
Good math/measurement skills Good written and verbal communication skills Basic reading and comprehension skills Must achieve required color testing score
Reasoning Ability
Determine correct batch making procedures as instructed in initial training and described on batch ticket.
Determine if raw materials are fit for use. Work without continuous supervision while completing assigned projects.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, use hands to handle product and equipment and reach with hands and arms.
The employee frequently is required to walk, sit, stoop, kneel and crouch.
The employee must regularly lift and/or move up to 25 pounds, frequently lift/move up to 45 pounds, and occasionally lift/move 400 to 500 pounds with specially provided equipment.
Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment is representative of those an employee would encounter in a normal paint manufacturing facility while performing the job tasks listed in this job description.
The employee is exposed to solvent vapors at well below the OSHA permissible exposure limit and when required, adequate personal protection equipment is required.
KEY PERFORMANCE INDICATORS (KPI)
Completing the number of batches required by the daily production schedule. Accuracy of completed batches. Satisfactory appearance of work area. Attendance and attitude. Apply for this ad Online! ....Read more...
Type: Permanent Location: Hudson, North Carolina
Posted: 2026-08-04 15:11:15
-
This Monday-Friday DAYS based position is for a Maintenance Engineer vacancy and working with a market leading listed manufacturing business, based in the Stowmarket area.
The position offers excellent opportunities for both training and career development.What's in it for your as a Maintenance Engineer:
Hours of work - Monday - Friday (6am-3pm)
Salary - upto £50,000 per annum
Location - Stowmarket
Annual Bonus
OT paid at 1.25x and 2x
33 days holiday
Company Pension match
Employee Benefits Package
Training and career development opportunities
Main Duties & Responsibilities of Maintenance Engineer;
Providing plant-wide maintenance service, departmental support and repairs ensuring that all production targets are maintained - maintaining factory manufacturing machinery
Monitor & supply Engineering support of machine set-up & changeovers to ensure that the product conforms to any quality assurance standards and ensuring changeovers are as efficient as possible.
Experience and Qualifications Required for Maintenance Engineer:
Recognised Engineering Apprenticeship & Qualification or equivalent, e.g.
NVQ, City and Guilds, ONC, BTEC or above - Mechanical or Electrical
High degree of Health & Safety awareness.
Ability to fault find, repair and provide solutions to problems.
The position may suit a Mechanical Maintenance Engineer, Electrical maintenance engineer, maintenance fitter, maintenance electrician, multi-skilled maintenance engineer etc ....Read more...
Type: Permanent Location: Bury St Edmunds, England
Start: ASAP
Salary / Rate: £50000.00 - £55000.00 per annum
Posted: 2026-08-04 12:06:21
-
Test Engineer - Power Electronics - Aargau, SwitzerlandMandatory Skillset: PCB, Testing, Electronics
Our Client:Is a pioneering family-owned Swiss company specialising in power electronics that designs, manufactures, and supplies high-power RF amplifiers and transmitters for various industries, including broadcasting, telecommunications, military and defence, and scientific research.
Job Summary:We are seeking a skilled Test Engineer to join our client's team, who is responsible for developing test requirements, creating test instructions, and testing PCBs, assemblies, and systems.
The ideal candidate will have a strong background in electronics and measurement technology, with practical experience in handling measuring equipment and a good understanding of radio frequency and power engineering.
Main Responsabilities:
Development of test requirements and new test methods in collaboration with the development department
Creation of test instructions and test reports
Testing, repairing (requires e.g.
soldering skills) and commissioning of PCB's, assemblies and systems as well as participation in tests in the test field
Checking production orders and goods receipt material according to quality characteristics
Perform factory inspections with customers
Management of measuring equipment storage
Construction of test facilities for the rationalization of test procedures
Required Competencies:
Completed technical training in the direction of electronics/measurement technology, technician school, an advantage
Practical experience in handling measuring equipment
Knowledge of radio frequency and power engineering is an advantage
Excellent knowledge of German and English
Positive attitude to work
Reliable team player with a pronounced quality awareness
Enjoy working independently
Benefits:
Competitive salary and benefits package - Up to CHF 110k
Opportunity to work on exciting and challenging projects
Collaborative and dynamic work environment
Professional development and training opportunities
Comprehensive benefits package, including health insurance, retirement plan, and more
Flexible working hours and remote work options
30 Days Annual Leave
Location: Aargau, Baden, SwitzerlandSalary: CHF 80-110k + Bonus Benefits
Tech Stack: PCB, Testing & Electronics
Applicants for the Test Engineer position must be based in Switzerland
NOIRSWITZERLANDRECNOIREUROPERECNOIREURNET
NC/TC/TESARG80110 ....Read more...
Type: Permanent Location: Baden, Switzerland
Start: ASAP
Salary / Rate: Swiss Franc80000 - Swiss Franc110000 per annum
Posted: 2026-08-04 02:08:42
-
Join a leading manufacturing company as an Maintenance Electrician, This is a fantastic opportunity for those looking to take the next step in their career.
This role offers excellent benefits, including a competitive salary, overtime opportunities, and continuous training to support your growth as a Maintenance Electrician.What's in it for you as Maintenance Electrician;
Salary: £53,000 per annum
Hours: Week1 - Monday - Friday- 5.30am-2pm // Week 2 - 1.30pm -10pm
Location: Ilkeston, Derbyshire
Overtime - Paid at 1.5 and 2x
Benefits: Company pension contribution, work overalls washing service, Death in Service
Holidays: 31 days holiday increasing with one each year
Hours: 40 hour week
Training: Continued training and engineering development
Job Security: Grow within a market leader offering long-term career progression
Key Responsibilities of the Maintenance Electrician;
Responsible for plant wide proactive and reactive Mechanical Maintenance activities to ensure the optimum performance of the factory.
Covering planned and reactive maintenance activities across manufacturing lines
Help to drive plant improvements and increased efficiencies
Identify and resolve recurring plant issues through engineering improvements (RCA)
Enhance plant reliability with best practices using CMMS
Required Experience & Qualifications needed as a Maintenance Electrician;
You will need to hold the following Mechanical or Electrical Vocational and Technical qualifications to be considered: Time served Maintenance Engineer, City and Guilds Level 3, BTEC Level 3 or higher with NVQ Level 3, OR be Apprentice trained to level 3 or equivalent.
Strong planned and reactive Mechanical or Electrical maintenance experience within a manufacturing environment as an Maintenance Engineer
....Read more...
Type: Permanent Location: Ilkeston, England
Start: ASAP
Salary / Rate: £53000 - £56000 per annum
Posted: 2026-08-03 16:24:53
-
The Maintenance Electrician vacancy is working with a leading manufacturing company based in the Maidstone area of Kent.
The position offers excellent opportunities for both training and career development.
The client have large CAPEX and investment budgets.Location: Maidstone, KentWhat's in it for you as a Maintenance Electrician?
Hours of Work - Panama - 4on 4off Days and Nights
Salary - £57,500 per annum, plus annual pay increases
33 days Holiday pro rata
Overtime at 1.5x and 2x
Annual KPI Production Bonus
Company pension
Employee Assistance Programme
Training, Career and Development opportunities
Main Duties & Responsibilities of Maintenance Electrician include;
Providing plant-wide maintenance service, departmental support and repairs ensuring that all production targets are maintained - maintaining factory manufacturing machinery
Monitor & supply Engineering support of machine set-up & changeovers to ensure that the product conforms to any quality assurance standards and ensuring changeovers are as efficient as possible.
Experience and Qualifications Required for the Maintenance Electrician;
Recognised Engineering Apprenticeship & Qualification or equivalent, e.g.
NVQ, City and Guilds, ONC, BTEC or above - Mechanical or Electrical
Time served Mechanical Engineer or as Maintenance Engineer
High degree of Health & Safety awareness.
Ability to fault find, repair and provide solutions to problems.
Maintenance Engineer experience or qualifications of a Maintenance Engineer
The position may suit a Maintenance Engineer, Mechanical Maintenance Engineer,, Electrical Maintenance Engineer, Maintenance engineer, Maintenance fitter, Multi-skilled engineer, Mechanical Engineer ....Read more...
Type: Permanent Location: Maidstone, England
Start: ASAP
Salary / Rate: £56000.00 - £60000.00 per annum
Posted: 2026-08-03 16:19:52
-
Junior Project Engineer
Birmingham
£46,000 Basic + OEM Training + Technical Progression + Job Satisfaction + Innovative Projects + Growing Company + Pension + Holidays + Hybrid Working + Monday to Friday
Kick-start your career with a world-leading manufacturer of automated food packaging and processing solutions as a Junior Project Engineer.
This is an exciting opportunity to join a growing engineering team where you'll receive full OEM training, work alongside experienced Project Engineers, and develop into a technical specialist delivering complex capital equipment projects from concept through to commissioning.
Join a company renowned for innovation, high-quality engineering and investing in its people.
You'll gain exposure to bespoke automation projects, working closely with customers, suppliers and internal teams while building your project management and technical engineering skills.
This is an excellent opportunity for an ambitious engineer looking for long-term career progression within a global business.
Due to continued growth and increased project demand, the company is looking for a Junior Project Engineer to support the delivery of automated packaging and processing systems across the UK and internationally.
The Role of a Junior Project Engineer Will Include:
Supporting the delivery of automated packaging and processing projects from concept through to commissioning
Producing and maintaining 2D GA drawings and 3D line layouts using CAD software
Assisting with technical proposals, layouts and engineering documentation
Coordinating with customers, suppliers and internal engineering teams throughout the project lifecycle
Supporting Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT), installation and commissioning activities
Assisting with technical risk management, engineering change control and continuous improvement projects
Working alongside senior engineers to deliver safe, compliant and cost-effective engineering solutions
The Successful Junior Project Engineer Will Have:
An engineering qualification or previous experience within mechanical, manufacturing or project engineering
Experience with CAD software (2D and/or 3D)
An interest in automation, capital equipment or special purpose machinery
Strong organisational and communication skills
A proactive attitude with a willingness to learn and develop
Full UK Driving Licence
Call Rebecka Van Ristell on 07458 163046 for immediate consideration or apply today.
Keywords: Junior Project Engineer, Graduate Project Engineer, Project Engineer, Mechanical Engineer, Manufacturing Engineer, Automation Engineer, Packaging Engineer, Food Processing Engineer, Capital Equipment, Special Purpose Machinery, CAD Engineer, Mechanical Design Engineer, Junior Mechanical Engineer, Applications Engineer, Systems Engineer, Commissioning Engineer, OEM, Birmingham, Solihull, Coventry, Redditch, Worcester, Tamworth, Leicester, Derby, Nottingham, Telford, West Midlands.
This vacancy is being advertised by Future Engineering Recruitment Ltd.
The services of Future Engineering Recruitment Ltd are those of an Employment Agency.
Please visit our website at Future Engineering Recruitment to view other positions we are currently handling.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal right to work in the United Kingdom.
Candidates who do not currently hold this right, or are awaiting a decision on their application, should not apply as their details will not be processed.
We will endeavour to respond to all applicants; however, due to the high volume of applications received, we can only guarantee that candidates who have been shortlisted will be contacted. ....Read more...
Type: Permanent Location: Birmingham, England
Start: asap
Duration: perm
Salary / Rate: £46000 - £50000 per annum + Training + Stability + Work life balance
Posted: 2026-08-03 16:17:08
-
Continued Expansion: £13.50 per hour, Monday to Friday, slightly early finish on a Friday, Free car-parking, brand new factory - excellent working environment, all tooling provided by the company, weekly pay, multiple hires required, holiday payAn established and growing vehicle-conversion specialist is looking to recruit a number of Production Fitters to support increased production demand at its Warrington facility.We are recruiting multiple people for this role as the company has opened a new facility with an extensive order book for 2026 and beyond.We would be keen to hear from people that are comfortable working with hand and power tools, (all tools provided by the company), and people that may have worked as a coachbuilder, joiner, assembly, car mechanic etc.
No prior vehicle fitting experience needed as full training will be givenIf you have some of the skills for the Production Fitter opportunity, we still encourage you to apply or contact Rodger Morley at E3 Recruitment if you would like a private chat about the position.Key responsibilities of the Production Fitters position
Mechanical assembly and installation
Installing, flooring, side panels, shelving, basic electrical fitting (full training given on all installation work)
Working from, build instructions, and job sheets
Use of hand and power tools to assemble components to specification
Ensuring quality standards and safe working practices are followed
Supporting production targets and team output
What's on offer for the Production Fitter opportunity
Competitive hourly rate £13.50 an hr
Stable, ongoing work with a well-known employer
Clean, modern working environment
Opportunity for long-term progression
Ready to apply for the Production fitter's position - please click apply today and Rodger Morley at E3 Recruitment will be in touch to discuss the opportunity in more detail. ....Read more...
Type: Permanent Location: Warrington, England
Start: ASAP
Salary / Rate: £28000 - £30000 per annum
Posted: 2026-08-03 10:44:37
-
This company designs and manufactures advanced scientific systems and is continuing to grow due to increasing demand.
As a Test Engineer, you'll play a key role in ensuring product quality while gaining exposure to cutting-edge technology and international projects.
Your Role as a Test Engineer:
* Testing a wide range of scientific instruments
* Working to defined test schedules and specification
* Completing Factory Acceptance Tests (FAT)
* Fault-finding and diagnosing technical issues
* Supporting packing and preparation of systems Liaising with customers and supporting training on systems
The Successful Test Engineer Will Have:
* Strong mechanical skills
* Good troubleshooting and fault-finding ability
* Analytical mindset with attention to detail
* Engineering or Physics degree or experience with low-temperature systems is desirable.
*Ability to commute to the Acton areaPlease apply or contact Rebecka for immediate consideration.
Keywords: Test Engineer, Testing Engineer, Mechanical Engineer, Electrical Engineer, Electronic Engineer, Electronics Engineer, Service Engineer, Field Service Engineer, Commissioning Engineer, Installation Engineer, Production Engineer, Manufacturing Engineer, Quality Engineer, Systems Engineer, Calibration Engineer, Validation Engineer, Fault Finding, Diagnostics, Troubleshooting, FAT, Factory Acceptance Test, SAT, Scientific Equipment, Laboratory Equipment, Instrumentation, Electro-Mechanical, Mechatronics, Engineering Technician, Graduate Engineer,Acton, West London, Ealing, Park Royal, Hammersmith, Chiswick, Shepherd's Bush, White City, Wembley, Greenford, Northolt, Brentford, Harlesden, Perivale, Hayes, Uxbridge, Southall, Hanwell, London
This vacancy is being advertised by Future Engineering Recruitment Ltd.
The services of Future Engineering Recruitment Ltd are that of an Employment Agency.
Please visit our website at futureengineer.co.uk to view other positions we are currently handling.
Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom.
Applications from candidates without this right will not be processed.
We will endeavour to respond to all applicants; however, due to the volume of applications, only shortlisted candidates will be contacted. ....Read more...
Type: Permanent Location: Acton, England
Start: asap
Salary / Rate: £32000 - £35000 per annum + Training + Stability + Work life balance
Posted: 2026-08-03 08:55:30
-
Empowering Adults with Complex Needs to Live Independently
Are you passionate about making a real difference? At First City Group, we support adults with complex needs to live fulfilling, independent lives and we're looking for compassionate and committed Support Workers to join our Supported Living team.
You'll provide high-quality, person-centred support to adults with learning disabilities, autism, physical disabilities, complex health needs, and mental health conditions, helping them live life on their own terms with dignity, respect, and choice at the heart of everything you do.
We support people facing mental health challenges with compassion, respect, and an open, non-judgemental attitude.
Through a trauma-focused approach, we recognise the impact of lived experiences and provide safe, person-centred support that empowers individuals to move forward with confidence and dignity.
This role includes providing 1:1, 2:1, and 3:1 support depending on individual needs and care requirements.
You will support individuals with a range of health conditions, including mental health needs, promoting emotional wellbeing, independence, safety, and community inclusion.
We're looking for people who are caring, reliable, patient, and passionate about delivering outstanding support that truly makes a difference every day.
Hours, Pay & Location
Various hours available
Flexible shift patterns, including days, evenings, and some 12-hour shifts in 24-hour care settings
Shift lengths starting from 4 hours
Pay rate: £12.74 per hour (Bank Rate Varies)
Covering Swindon & Surrounding area
What You'll Be Doing
No two days are the same, but your role may include:
Supporting daily routines, including personal care and medication
Assisting with physiotherapy and clinical tasks
Preparing meals and promoting healthy lifestyles
Supporting individuals with complex health needs (e.g.
catheter care)
Encouraging independence with budgeting, appointments, and community activities
Providing emotional support and assistance with evening routines
You'll work collaboratively with healthcare professionals, families, and colleagues to deliver consistent, high-quality care.
What We're Looking For
Minimum 6 months' experience in care or supported living
Confidence supporting individuals with complex needs
Ability to follow care plans and work independently or within a team
A flexible, positive, and person-centred approach
Full UK driving licence desirable but not essential (non-drivers must be able to travel independently)
Applicants must be 18 years or over
What We Offer
Guaranteed hours (T&Cs apply)
28 days' pro-rata holiday entitlement
Comprehensive induction, training, and shadowing
Free uniform
Specialist training tailored to individuals' needs
Blue Light Card - access to retail and lifestyle discounts
Employee Assistance Programme
Motor maintenance discounts through a local partner
Use of company pool car (subject to availability)
Refer-a-friend scheme - £300 Full-Time Supported Living or £500 for a Full-Time Driver into our community services (T&C's applied)
Important Information
All roles are subject to an Enhanced DBS check, satisfactory references, and completion of mandatory training. ....Read more...
Type: Permanent Location: Swindon, England
Start: ASAP
Salary / Rate: Up to £12.74 per hour + Full Training, Mileage, Pension
Posted: 2026-08-03 08:52:30
-
Generous, competitive package; as a Maintenance Engineer, Shift Engineer, MON to FRI role, you will be joining a leading specialist that transforms materials into high-quality products for the construction and manufacturing sectors, based near Peterborough.
Excellent training, ongoing development and clear career advancement opportunities are provided.Location: PeterboroughWhat's in it for you as a Maintenance Engineer? , A Salary of £56,000 salary Overtime available at 1.5x and 2x , Monday to Friday - 3 Shift (6-2/2-10/10-6) , 31 days' holiday (pro rata), increasing by one day each year up to 36 days, including bank holidays. , KPI Bonus , Company pension , Excellent training, ongoing development and clear career advancement opportunities Peterborough location is easily accessible from Stamford, Huntingdon, March, Spalding, Bourne, Wisbech, Grantham, Oundle, Ely, Northampton, Bedford, Corby, KetteringMain Responsibilities of the Maintenance Engineer? , Providing full plant-wide maintenance support, repairs and technical assistance to ensure production output and efficiency targets are consistently achieved , Carrying out maintenance on a wide range of factory manufacturing machinery and automated equipment , Supporting machine set-ups and changeovers, ensuring compliance with QA standards and maximising efficiency during production transitions , Identifying faults, diagnosing issues and implementing effective and permanent engineering solutionsRequirements for the Maintenance Engineer? , Recognised Engineering Apprenticeship to become a Maintenance Engineer / Electrical Engineer/ Maintenance Engineer, Shift Engineer, NVQ Level 2-5 in Mechanical or Electrical Engineering, BTEC National Diploma or Extended Diploma in Engineering (Mechanical or Electrical), City & Guilds qualifications in Engineering, Electrical Installation. , Experience with industrial machinery, conveyors, pumps, motors, and automation systems , Strong awareness of Health & Safety and safe working practices , Proven ability to fault-find, repair and resolve engineering issues confidently , Previous experience working as a Maintenance Engineer or in a similar engineering maintenance roleTo apply for the Maintenance Engineer / Electrical Engineer/ Maintenance Engineer role, we would love to receive CVs frp, Mechanical Maintenance Engineer, Electrical Maintenance Engineer, Maintenance Fitter, Maintenance Electrician, Multi-Skilled Engineer, or anyone with strong industrial maintenance experience.Please click the link and apply for Maintenance Engineer / Electrical Engineer/ Maintenance Enginee ....Read more...
Type: Permanent Location: Peterborough, England
Start: ASAP
Salary / Rate: £57000.00 - £60000.00 per annum
Posted: 2026-08-03 08:41:31
-
DevOps Engineer - FinTech - Newcastle
(Tech stack: DevOps Engineer, PowerShell, C#, Java, Python, Ansible, Terraform, Docker, Kubernetes, Docker Swarm, ELK, Grafana, CI/CD, TeamCity, SQL Server, Windows, Linux, Programmer, Developer, Architect, DevOps Engineer)
Our client is a cutting-edge FinTech company with a reputation for innovation and excellence.
They design and build advanced trading and analytics platforms used globally by some of the world's leading financial institutions.
With ambitious plans for growth and new product launches, they are now seeking a talented DevOps Engineer to join their team in Newcastle.
As a DevOps Engineer, you will be responsible for creating, maintaining, and optimising the infrastructure and pipelines that support highly complex financial software platforms.
You'll work closely with developers and stakeholders, ensuring deployments are seamless, environments are robust, and systems are both secure and scalable.
This is a fantastic opportunity to apply your technical expertise in a collaborative, fast-paced environment where innovation is actively encouraged.
The successful candidate will bring:
A 2:1 degree or above in Computer Science (or related), ideally from a top university.
Strong ability in scripting with PowerShell or a similar language.
Hands-on coding skills in at least one of C#, Java, or Python.
Practical knowledge of automation tools such as Terraform or Ansible.
Background in container platforms (e.g., Docker) with orchestration using Kubernetes or Swarm.
Familiarity with system monitoring solutions (e.g., ELK, Grafana, or similar).
Proven track record in building and maintaining CI/CD pipelines, preferably with TeamCity.
Experience working with SQL databases, particularly Microsoft SQL Server.
Comfort managing both Windows and Linux environments.
The ability to communicate clearly with colleagues and clients to resolve challenges and deliver solutions.
Desirable (but not essential):
Working knowledge of Atlassian products such as JIRA or Bitbucket.
Exposure to artifact management tools like Artifactory.
Deployment automation experience with Octopus Deploy.
Awareness of code quality and analysis tools (e.g., SonarQube).
Background with job scheduling platforms such as Control-M.
Experience with major cloud providers (Azure, AWS, GCP).
Familiarity with VMware (vSphere) and storage area networks.
Previous experience in financial services would be advantageous, though not a requirement.
This is an exceptional opportunity to join a forward-thinking organisation where your contributions will directly shape the delivery of world-class FinTech products.
Location: Newcastle, UK (Fully Office Based)
Salary: £50,000 - £90,000 + Bonus + Benefits
Applicants must be based in the UK and have the right to work in the UK.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUKTECHREC
NOIRUKREC ....Read more...
Type: Permanent Location: Newcastle upon Tyne, England
Start: ASAP
Salary / Rate: £50000 - £90000 per annum
Posted: 2026-08-03 02:02:08
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Team Leader (Maintenance) supports operations management by coordinating daily technician activities, leading troubleshooting efforts, mentoring less-experienced staff, and driving continuous improvement within the department.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Supports and validates the work of maintenance technicians by answering questions, coordinating maintenance work, and providing general direction.
Mentor and train new maintenance technicians.
Troubleshoots complex maintenance problems with little or no assistance.
Perform preventive maintenance and work order audits to ensure task completion and process improvements.
Responds to service calls for production needs.
Follow instructions from the maintenance supervisor and provide updates on maintenance task progress.
Manage inventory by receiving, stocking, and requesting maintenance parts as needed.
Ensure compliance by maintaining accurate maintenance records.
Participate in daily tier meetings, departmental discussions, and operational planning sessions.
Identify and recommend process improvements for maintenance procedures, equipment performance, and overall plant operations.
May be trained and available as the back-up for planning and scheduling functions and other duties as required.
Understands and interprets technical documents and diagrams which include but are not limited to: factory manuals, blueprints, schematics, diagrams limited to Single Line Electrical Drawings, mechanical and electrical equipment schematics, pneumatics, hydraulics, Process and Instrumentation Diagrams (P&ID's), and etc..EDUCATION REQUIREMENT:
No formal educational required.
EXPERIENCE REQUIREMENT:
Four to seven years related experience and/or training.
OTHER SKILLS AND ABILITIES:
Experience in 480-volt 3 phase electricity required.
Capable of installing, programming, and troubleshooting PLC; AC/DC drive motors preferred.
Ability to troubleshoot electric, air systems, and hydraulic systems.
Knowledge of lockout/tagout, arc flash requirements, confined space entry and hot work permit.
Experience with SAP, Asset Optics, MS Office and Teams a plus.
Ability to work overtime as needed; ability to meet deadlines.
Ability to manage multiple priorities and respond urgently to down equipment.
Effective team player, self-motivated, quick learner.
Good communication skills with the ability to read, write, and communicate fluently in English.
Perform simple arithmetic functions including addition, subtraction, multiplication, and division of whole numbers, decimals, fractions, and mixed numbers.
Able to use precision measuring equipment.
Convert measures from feet/inches to decimals and vice versa.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Ashland, Ohio
Posted: 2026-08-02 23:12:12
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB:
The Team Leader (Maintenance) supports operations management by coordinating daily technician activities, leading troubleshooting efforts, mentoring less-experienced staff, and driving continuous improvement within the department.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Supports and validates the work of maintenance technicians by answering questions, coordinating maintenance work, and providing general direction.
Mentor and train new maintenance technicians.
Troubleshoots complex maintenance problems with little or no assistance.
Perform preventive maintenance and work order audits to ensure task completion and process improvements.
Responds to service calls for production needs.
Follow instructions from the maintenance supervisor and provide updates on maintenance task progress.
Manage inventory by receiving, stocking, and requesting maintenance parts as needed.
Ensure compliance by maintaining accurate maintenance records.
Participate in daily tier meetings, departmental discussions, and operational planning sessions.
Identify and recommend process improvements for maintenance procedures, equipment performance, and overall plant operations.
May be trained and available as the back-up for planning and scheduling functions and other duties as required.
Understands and interprets technical documents and diagrams which include but are not limited to: factory manuals, blueprints, schematics, diagrams limited to Single Line Electrical Drawings, mechanical and electrical equipment schematics, pneumatics, hydraulics, Process and Instrumentation Diagrams (P&ID's), and etc..EDUCATION REQUIREMENT:
No formal educational required.
EXPERIENCE REQUIREMENT:
Four to seven years related experience and/or training.
OTHER SKILLS AND ABILITIES:
Experience in 480-volt 3 phase electricity required.
Capable of installing, programming, and troubleshooting PLC; AC/DC drive motors preferred.
Ability to troubleshoot electric, air systems, and hydraulic systems.
Knowledge of lockout/tagout, arc flash requirements, confined space entry and hot work permit.
Experience with SAP, Asset Optics, MS Office and Teams a plus.
Ability to work overtime as needed; ability to meet deadlines.
Ability to manage multiple priorities and respond urgently to down equipment.
Effective team player, self-motivated, quick learner.
Good communication skills with the ability to read, write, and communicate fluently in English.
Perform simple arithmetic functions including addition, subtraction, multiplication, and division of whole numbers, decimals, fractions, and mixed numbers.
Able to use precision measuring equipment.
Convert measures from feet/inches to decimals and vice versa.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Ashland, Ohio
Posted: 2026-08-02 23:11:42
-
Early finish on a Friday Circa £28,000 a year/£13.50 an hr, Monday to Friday, Free car-parking, brand new factory - excellent working environment, all tooling provided by the company, weekly pay, holiday pay.
Multiple positions available.
Location: Appleton Thorn, Warrington
An established and growing vehicle-conversion specialist is looking to recruit a number of Assembly Fitters to support increased production demand at its Warrington facility.
We are continuing to recruit multiple people as the company continues to grow within a new manufacturing facility due to open next month.
We would be keen to hear from people who are comfortable working with hand and power tools (all tools provided by the company), and people who may have worked as a Coachbuilder, Assembly Fitter, Joiner, Car mechanic, etc.
No prior vehicle fitting experience needed as full training will be given.
If you have some of the skills for the Assembly Fitter opportunity, we still encourage you to apply or contact Maisie Cope at E3 Recruitment if you would like a private chat about the position.
Key responsibilities of the Assembly Fitters position
Mechanical assembly and installation
Installing flooring, side panels, shelving, and basic electrical fittings (full training given on all installation work)
Working from the build instructions and job sheets
Use of hand and power tools to assemble components to specification
Ensuring quality standards and safe working practices are followed
Supporting production targets and team output
What's on offer for the Assembly Fitter opportunity
Competitive hourly rate £13.50 an hr/£28K a year
Stable, ongoing work with a well-known employer
Clean, modern working environment
Friendly, supportive team and Management
Ready to apply for the Assembly Fitter positions - please click apply today, and Maisie Cope at E3 Recruitment will be in touch to discuss the opportunity in more detail. ....Read more...
Type: Permanent Location: Runcorn, England
Start: ASAP
Salary / Rate: £13.50 - £13.5 per hour
Posted: 2026-08-02 10:00:17
-
JOB DESCRIPTION
Legend Brands, an industry leader and long-standing company, combining over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
Job Summary
Under general supervision, the Drafter II is responsible for working with design engineers to produce drawings from sketches, existing drawings, and electronic images.
Utilize CAD tools to create and maintain individual part and assembly drawings.
Support the change control process, complete engineering change orders and update engineering and manufacturing databases.
Please apply directly on our careers page - https://hcwx.fa.us2.oraclecloud.com/hcmUI/CandidateExperience/en/sites/CX_2
Essential Duties
• Ensure product documentation of drawings, revisions, engineering change requests, and engineering change orders are accurate and complete• Respond to production and/or process problems through Engineering Change Requests (ECR) and by conferring with the engineers• Support new product development by creating part and assembly drawings under the direction of the product designer • Provide Bills of Materials (BOM) for new product or improvements to existing products and maintain BOMs in material planning computer system (MRP 9000)• Create Engineering Change Requests and Engineering Change Orders (ECO) for communicating and recording new products and product changes.
• Prepare miscellaneous diagrams, charts and drawings• Maintain revision-controlled drawings and models in a PDM vault.
• Communicate with QA, Vendors, Buyers, Inventory and Manufacturing regarding new and revised drawings.
• Performs other related duties as assigned.
Additional knowledge to qualify for Drafter II classification
• Basic proficiency in Word and Excel
• Basic creation of part model and assemblies.
Follow the QC drawing and the drawing release process.
• Understanding of CAD filing system on the main network, PDM, and in SharePoint
• Process ECR's and ECO's
• Basic knowledge of ERP databases
• Understanding and practicing SW configurations; creation of new and editing existing configurations
• Applying sheet metal properties for Press Brake based on material type and thickness
Minimum Qualifications
Education and Experience • High school diploma or equivalent required.
• Minimum of 2-4 years related work experience required.
Employment Standards
• Knowledge of SolidWorks • Knowledge of reading drawings • Skilled in SolidWorks • Skilled in Microsoft office and excel • Ability to Organize and work to priorities • Ability to process drawing revision on part level CAD files • Ability to pass a pre-employment background check.
Hiring Range Between $34.00/hr.
- $38.00/hr.
Benefits
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations • Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
• Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's.
• All job offers are contingent upon satisfactory pre-employment drug test and background screening.Apply for this ad Online! ....Read more...
Type: Permanent Location: Prescott, Arizona
Posted: 2026-08-01 15:13:52
-
JOB DESCRIPTION
Employer Description:
Legend Brands is a growing multi-vertical manufacturer serving restoration, cleaning, and construction professionals; performance automotive cooling markets; fish hatchery and aquaculture operations; through a portfolio of industry-leading brands including Dri-Eaz, Mediclean, UnSmoke, OdorX, Sapphire Scientific, Prochem, Chemspec, Flex-A-Lite, and Marisource.
Legend Brands is hiring for a Design Engineer at our Arlington, WA location.
This opportunity is for a unique individual that has the engineering background, but also enjoys working with their hands.
If you have the combined engineering talent and the mechanical skills, we encourage you to apply for this position.
The Design Engineer is responsible for overseeing large Truck Mount project management, which involves initial investigation of viability, cost, initial design, product research and prelim testing.
Please apply directly on our careers page - https://hcwx.fa.us2.oraclecloud.com/hcmUI/CandidateExperience/en/sites/CX_2
Essential Duties
Follows product development process
Finalizes the initial concept to an Alpha Prototype design using all the same resources
Aids in refinement process of the initial prototype, incorporation into production, and customer acceptance
Manages Beta process for ground up designs or Preproduction process
Conducts all final testing with thorough documentation in drawings, manuals, and kit instructions
Manages full project documentation (Schedule/Logs/Test Data/Requirements/Statement of Work/Project Approval SS/ ETC) for each project
Designs CAD equipment based on project pillar requirements supplied by management and PDC for cfm required - (recovery), water pressure (psi) water volume (gpm)
Assists in final production implementation
Responds to Vendor and Customer interactions, as needed
Creates Engineering Change Orders.
Provides Testing / Data Acquisition
Completes Proto Fabrication and Design.
Assembles prototypes and test samples
Performs other related duties as assigned
Minimum Qualifications
Bachelor's degree in engineering or design required
Experience working with manufacturing and machines preferred
Must have proficiency computer skills, including Microsoft Office Suite, D365 (or equivalent MRP)
Must have proficiency in SolidWorks
Strong aptitude for creating detailed blueprints and instructions
Must be able to multitask, prioritize, and manage time efficiently
Accurate and precise attention to detail
Must have exceptional verbal and written communication skills and interact with customers via phone and in-person
Must be able to read, write, and speak English language and be understood
Must have good mechanical aptitude
Must be driven and goal oriented and willing to take on new challenges and see them through
Design Engineer
I
is intended for individuals with a minimum of 1-2 years related work experience.
Requires knowledge and competent demonstration of the following within 6 months of hire:
Understanding in Legend Brands Design Process
MS Project
Design Engineer
II
is intended for individuals with a minimum of 5 years related work experience.
Requires working knowledge and competent demonstration of the following:
Must have in-depth knowledge of engineering and design principles
Must understand CAD drawings, bill of materials (MRP), SolidWorks, and PDM Vault
Organize plans and create schedules using MS Project
Estimate and establish cost parameters and budgets for design
Hiring Range
$80.2K - $97K DOE
Benefits
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, 10 paid holidays, generous paid time off, employer matching 401 (k)PLUS a company-sponsored pension, and more!
Additional Considerations • Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability• Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's
• All job offers are contingent upon satisfactory pre-employment drug test and background checksApply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2026-08-01 15:13:19
-
JOB DESCRIPTION
Employer Description:
Legend Brands is a growing multi-vertical manufacturer serving restoration, cleaning, and construction professionals; performance automotive cooling markets; fish hatchery and aquaculture operations; through a portfolio of industry-leading brands including Dri-Eaz, Mediclean, UnSmoke, OdorX, Sapphire Scientific, Prochem, Chemspec, Flex-A-Lite, and Marisource.
Legend Brands is hiring for a Design Engineer at our Arlington, WA location.
This opportunity is for a unique individual that has the engineering background, but also enjoys working with their hands.
If you have the combined engineering talent and the mechanical skills, we encourage you to apply for this position.
The Design Engineer is responsible for overseeing large Truck Mount project management, which involves initial investigation of viability, cost, initial design, product research and prelim testing.
Please apply directly on our careers page - https://hcwx.fa.us2.oraclecloud.com/hcmUI/CandidateExperience/en/sites/CX_2
Essential Duties
Follows product development process
Finalizes the initial concept to an Alpha Prototype design using all the same resources
Aids in refinement process of the initial prototype, incorporation into production, and customer acceptance
Manages Beta process for ground up designs or Preproduction process
Conducts all final testing with thorough documentation in drawings, manuals, and kit instructions
Manages full project documentation (Schedule/Logs/Test Data/Requirements/Statement of Work/Project Approval SS/ ETC) for each project
Designs CAD equipment based on project pillar requirements supplied by management and PDC for cfm required - (recovery), water pressure (psi) water volume (gpm)
Assists in final production implementation
Responds to Vendor and Customer interactions, as needed
Creates Engineering Change Orders.
Provides Testing / Data Acquisition
Completes Proto Fabrication and Design.
Assembles prototypes and test samples
Performs other related duties as assigned
Minimum Qualifications
Bachelor's degree in engineering or design required
Experience working with manufacturing and machines preferred
Must have proficiency computer skills, including Microsoft Office Suite, D365 (or equivalent MRP)
Must have proficiency in SolidWorks
Strong aptitude for creating detailed blueprints and instructions
Must be able to multitask, prioritize, and manage time efficiently
Accurate and precise attention to detail
Must have exceptional verbal and written communication skills and interact with customers via phone and in-person
Must be able to read, write, and speak English language and be understood
Must have good mechanical aptitude
Must be driven and goal oriented and willing to take on new challenges and see them through
Design Engineer
I
is intended for individuals with a minimum of 1-2 years related work experience.
Requires knowledge and competent demonstration of the following within 6 months of hire:
Understanding in Legend Brands Design Process
MS Project
Design Engineer
II
is intended for individuals with a minimum of 5 years related work experience.
Requires working knowledge and competent demonstration of the following:
Must have in-depth knowledge of engineering and design principles
Must understand CAD drawings, bill of materials (MRP), SolidWorks, and PDM Vault
Organize plans and create schedules using MS Project
Estimate and establish cost parameters and budgets for design
Hiring Range
$80.2K - $97K DOE
Benefits
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, 10 paid holidays, generous paid time off, employer matching 401 (k)PLUS a company-sponsored pension, and more!
Additional Considerations • Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability• Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's
• All job offers are contingent upon satisfactory pre-employment drug test and background checksApply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2026-08-01 15:12:42
-
JOB DESCRIPTION
Legend Brands, an industry leader and long-standing company, combining over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
Job Summary
Under general supervision, the Drafter II is responsible for working with design engineers to produce drawings from sketches, existing drawings, and electronic images.
Utilize CAD tools to create and maintain individual part and assembly drawings.
Support the change control process, complete engineering change orders and update engineering and manufacturing databases.
Please apply directly on our careers page - https://hcwx.fa.us2.oraclecloud.com/hcmUI/CandidateExperience/en/sites/CX_2
Essential Duties
• Ensure product documentation of drawings, revisions, engineering change requests, and engineering change orders are accurate and complete• Respond to production and/or process problems through Engineering Change Requests (ECR) and by conferring with the engineers• Support new product development by creating part and assembly drawings under the direction of the product designer • Provide Bills of Materials (BOM) for new product or improvements to existing products and maintain BOMs in material planning computer system (MRP 9000)• Create Engineering Change Requests and Engineering Change Orders (ECO) for communicating and recording new products and product changes.
• Prepare miscellaneous diagrams, charts and drawings• Maintain revision-controlled drawings and models in a PDM vault.
• Communicate with QA, Vendors, Buyers, Inventory and Manufacturing regarding new and revised drawings.
• Performs other related duties as assigned.
Additional knowledge to qualify for Drafter II classification
• Basic proficiency in Word and Excel
• Basic creation of part model and assemblies.
Follow the QC drawing and the drawing release process.
• Understanding of CAD filing system on the main network, PDM, and in SharePoint
• Process ECR's and ECO's
• Basic knowledge of ERP databases
• Understanding and practicing SW configurations; creation of new and editing existing configurations
• Applying sheet metal properties for Press Brake based on material type and thickness
Minimum Qualifications
Education and Experience • High school diploma or equivalent required.
• Minimum of 2-4 years related work experience required.
Employment Standards
• Knowledge of SolidWorks • Knowledge of reading drawings • Skilled in SolidWorks • Skilled in Microsoft office and excel • Ability to Organize and work to priorities • Ability to process drawing revision on part level CAD files • Ability to pass a pre-employment background check.
Hiring Range Between $34.00/hr.
- $38.00/hr.
Benefits
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations • Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
• Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's.
• All job offers are contingent upon satisfactory pre-employment drug test and background screening.Apply for this ad Online! ....Read more...
Type: Permanent Location: Prescott, Arizona
Posted: 2026-08-01 15:12:36
-
JOB DESCRIPTION
Legend Brands, an industry leader and long-standing company, combining over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
Job Summary
Under general supervision, the Drafter II is responsible for working with design engineers to produce drawings from sketches, existing drawings, and electronic images.
Utilize CAD tools to create and maintain individual part and assembly drawings.
Support the change control process, complete engineering change orders and update engineering and manufacturing databases.
Please apply directly on our careers page - https://hcwx.fa.us2.oraclecloud.com/hcmUI/CandidateExperience/en/sites/CX_2
Essential Duties
• Ensure product documentation of drawings, revisions, engineering change requests, and engineering change orders are accurate and complete• Respond to production and/or process problems through Engineering Change Requests (ECR) and by conferring with the engineers• Support new product development by creating part and assembly drawings under the direction of the product designer • Provide Bills of Materials (BOM) for new product or improvements to existing products and maintain BOMs in material planning computer system (MRP 9000)• Create Engineering Change Requests and Engineering Change Orders (ECO) for communicating and recording new products and product changes.
• Prepare miscellaneous diagrams, charts and drawings• Maintain revision-controlled drawings and models in a PDM vault.
• Communicate with QA, Vendors, Buyers, Inventory and Manufacturing regarding new and revised drawings.
• Performs other related duties as assigned.
Additional knowledge to qualify for Drafter II classification
• Basic proficiency in Word and Excel
• Basic creation of part model and assemblies.
Follow the QC drawing and the drawing release process.
• Understanding of CAD filing system on the main network, PDM, and in SharePoint
• Process ECR's and ECO's
• Basic knowledge of ERP databases
• Understanding and practicing SW configurations; creation of new and editing existing configurations
• Applying sheet metal properties for Press Brake based on material type and thickness
Minimum Qualifications
Education and Experience • High school diploma or equivalent required.
• Minimum of 2-4 years related work experience required.
Employment Standards
• Knowledge of SolidWorks • Knowledge of reading drawings • Skilled in SolidWorks • Skilled in Microsoft office and excel • Ability to Organize and work to priorities • Ability to process drawing revision on part level CAD files • Ability to pass a pre-employment background check.
Hiring Range Between $34.00/hr.
- $38.00/hr.
Benefits
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations • Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
• Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's.
• All job offers are contingent upon satisfactory pre-employment drug test and background screening.Apply for this ad Online! ....Read more...
Type: Permanent Location: Prescott, Arizona
Posted: 2026-08-01 15:11:37
-
JOB DESCRIPTION
Employer Description:
Legend Brands is a growing multi-vertical manufacturer serving restoration, cleaning, and construction professionals; performance automotive cooling markets; fish hatchery and aquaculture operations; through a portfolio of industry-leading brands including Dri-Eaz, Mediclean, UnSmoke, OdorX, Sapphire Scientific, Prochem, Chemspec, Flex-A-Lite, and Marisource.
Legend Brands is hiring for a Design Engineer at our Arlington, WA location.
This opportunity is for a unique individual that has the engineering background, but also enjoys working with their hands.
If you have the combined engineering talent and the mechanical skills, we encourage you to apply for this position.
The Design Engineer is responsible for overseeing large Truck Mount project management, which involves initial investigation of viability, cost, initial design, product research and prelim testing.
Please apply directly on our careers page - https://hcwx.fa.us2.oraclecloud.com/hcmUI/CandidateExperience/en/sites/CX_2
Essential Duties
Follows product development process
Finalizes the initial concept to an Alpha Prototype design using all the same resources
Aids in refinement process of the initial prototype, incorporation into production, and customer acceptance
Manages Beta process for ground up designs or Preproduction process
Conducts all final testing with thorough documentation in drawings, manuals, and kit instructions
Manages full project documentation (Schedule/Logs/Test Data/Requirements/Statement of Work/Project Approval SS/ ETC) for each project
Designs CAD equipment based on project pillar requirements supplied by management and PDC for cfm required - (recovery), water pressure (psi) water volume (gpm)
Assists in final production implementation
Responds to Vendor and Customer interactions, as needed
Creates Engineering Change Orders.
Provides Testing / Data Acquisition
Completes Proto Fabrication and Design.
Assembles prototypes and test samples
Performs other related duties as assigned
Minimum Qualifications
Bachelor's degree in engineering or design required
Experience working with manufacturing and machines preferred
Must have proficiency computer skills, including Microsoft Office Suite, D365 (or equivalent MRP)
Must have proficiency in SolidWorks
Strong aptitude for creating detailed blueprints and instructions
Must be able to multitask, prioritize, and manage time efficiently
Accurate and precise attention to detail
Must have exceptional verbal and written communication skills and interact with customers via phone and in-person
Must be able to read, write, and speak English language and be understood
Must have good mechanical aptitude
Must be driven and goal oriented and willing to take on new challenges and see them through
Design Engineer
I
is intended for individuals with a minimum of 1-2 years related work experience.
Requires knowledge and competent demonstration of the following within 6 months of hire:
Understanding in Legend Brands Design Process
MS Project
Design Engineer
II
is intended for individuals with a minimum of 5 years related work experience.
Requires working knowledge and competent demonstration of the following:
Must have in-depth knowledge of engineering and design principles
Must understand CAD drawings, bill of materials (MRP), SolidWorks, and PDM Vault
Organize plans and create schedules using MS Project
Estimate and establish cost parameters and budgets for design
Hiring Range
$80.2K - $97K DOE
Benefits
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, 10 paid holidays, generous paid time off, employer matching 401 (k)PLUS a company-sponsored pension, and more!
Additional Considerations • Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability• Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's
• All job offers are contingent upon satisfactory pre-employment drug test and background checksApply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2026-08-01 15:11:06
-
We're looking for an experienced Plant Manager to join a process manufacturing plant environment, where you'll play a key role in driving operational excellence, efficiency, and continuous improvement close to the Beverley/Hull area.This position will be shown unrivalled development and genuine career progression.
You'll oversee plant processes, lead continuous improvement initiatives and ensure quality standards are consistently achieved.
This is a hands on leadership role where you'll be using Lean, Six Sigma and data driven performance management to enhance efficiency across factory operations.What's on Offer for you as Plant Manager
£75-80,000 per annum
25 days holiday + bank holidays
Group Pension Plan
Location - Beverley (Commutable from Hull, Goole, Driffield and York)
Employee Assistance Programme
A collaborative, innovative work environment
What You'll Do as Plant Manager
Lead, train and develop plant operators and process technicians and assisting to leading the site, Implement standardised work protocols and operator training programmes.
Use data analytics to optimise performance and minimise downtime.
Very much a LEAN focus and mindset to be able to grow volumes
Carry out Root Cause Analysis (RCA) and resolve production bottlenecks and Develop and maintain SOPs, risk assessments and safety protocols.
Drive Lean manufacturing, Six Sigma and continuous improvement projects, collaborate across teams to improve efficiency and production targets.
Promote a health, safety and sustainability first culture.
What we're Looking For in a Plant Manager
Ideally a degree in Engineering, Manufacturing, or Industrial/Business Management or commensurate experience
Proven management experience in a 24/7 process plant/manufacturing environment.
Lean Six Sigma (Green Belt or above)
Health & Safety qualification (IOSH / NEBOSH) is desirable, although training can be provided
Strong knowledge of manufacturing processes, quality systems and process optimisation.
Apply today for this Plant Manager, Manufacturing Manager or Process Manager vacancy ....Read more...
Type: Permanent Location: Beverley, England
Start: ASAP
Salary / Rate: £75000.00 - £80000.00 per annum
Posted: 2026-07-31 16:57:40
-
The Plant Manager / Factory Operations Manager is working with is a UK market leader in their field.
Manufacturing high volume products covering automated manufacturing processes.
The Manufacturing Plant Manager will help transform one of their key factories from good to great, working with a highly-willing and enthusiastic team to drive improvement activities across the plant and drive the future development of the site in the Buxton area.Highly profitable, the group has been through important structural change over the last few years; this change is now reaching its manufacturing plants in the form of changes in leadership, investment and ultimately, the goal to increase capacity across their UK supply chain.The Manufacturing Plant Manager is a critical appointment in driving localised strategy and resulting improvement, and is seen as an opportunity to appoint succession planning for the future.What's in it for you as a Plant Manager
Base Salary of circa £90,000 per annum
Company bonus of 25%
Highly attractive car allowance of £7,500
Location - Buxton/Derbyshire
Comprehensive pension
Employee benefits program
Permanent Position with a market leading International manufacturing group
Training and career progression opportunities
Roles and responsibilities as a Plant Manager; You will be a proven Operations Manager/ Factory Manager / Manufacturing Manager / Plant Manager, with a track record delivering improvements in culture, efficiency and productivity.
You know what world class looks like, but importantly you've previously led a business through a similar journey - so you'll have the ability to implement improvements and understand the challenges that come with this sort of role and be able to clearly demonstrate the results you delivered.
You understand the impact of leadership on culture, and the impact of culture on processes.The leadership culture is mature and accountable, the work-life balance achievable is fantastic compared to many manufacturing environments, and continued growth/development is available due to the organisation's multiple UK sites & succession planning strategy.Key requirements of Plant Manager:
A proven track record of managing and developing manufacturing operations within an either an automated or semi-automated manufacturing environment
Exponential experience of utilizing lean and CI tools to drive efficiencies and best practice, e.g.
WCM,OEE, TPM, 5s, VSM etc
Accustomed to managing budgets and capex
Knowledge of Engineering Maintenance and Plant based improvements would also be a distinct advantage although not essential
A strong appreciation for health and safety, ideally supported with a formal qualification, although training can be provided
....Read more...
Type: Permanent Location: Bakewell, England
Start: ASAP
Salary / Rate: £90000.00 - £100000.00 per annum
Posted: 2026-07-31 15:33:56
-
JOB DESCRIPTION
Legend Brands, an industry leader and long-standing, stable company, combines over 185 years of experience in providing equipment, accessories and chemicals for professional cleaning, facility maintenance, portable environmental control, fire remediation and water damage restoration.
Job Summary
Under general supervision, the Assembly Operator is responsible for fabricating and assembling components into finished industrial products including testing, inspection, and packaging for final delivery.
Work Schedule
Monday - Thursday
Supervision Responsibility:
None
Essential Duties
Assemble product according to work instructions (mechanical and wiring).
Operate hand tools, power tools, and machinery to complete assigned tasks.
Work efficiently within a team to meet daily production targets.
Perform routine preventive maintenance.
Keep the workstation clean and organized.
Follow safety protocols, including proper handling of electrical components and refrigerants.
Perform visual and functional quality checks on components and finished units.
Identify and report any defects, malfunctions, or safety concerns to supervisors.
Assist in training, troubleshooting, and data entry.
Understand drawings and BOMs to ensure proper assembly of products.
Certification and training in specialized production processes and equipment.
Perform other related duties as assigned.
Minimum Qualifications
High School Diploma or GED required.
Employment Standards
Knowledge of production preferred.
Skill in verbal and written communication, including the ability to follow both verbal and written instructions.
Skilled at working in an ever changing, fast-paced environment.
Skilled in paying attention to detail and problem-solving skills.
Knowledge and demonstration of safety procedures.
Ability to operate machinery and hand tools.
Ability to lift heavy objects (typically up to 50lbs) and stand for long periods.
Ability to understand manufacturing safety protocols.
Ability to pass a pre-employment background check.
Hiring Range
Between $18.00 - $25.25 per hour.
Benefits
Legend Brands offers an excellent benefits package with comprehensive medical, dental, vision, life insurance, disability coverage, leaves of absence, 10 paid holidays, generous paid time off, employer matching 401k PLUS a company-sponsored pension, and more!
Additional Considerations
Legend Brands is an equal opportunity employer that considers all applicants without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
Candidates must be authorized to work for an employer in the U.S., as we are not currently sponsoring or taking over sponsorship of employment Visa's.
All job offers are contingent upon satisfactory pre-employment drug test and background checksApply for this ad Online! ....Read more...
Type: Permanent Location: Burlington, Washington
Posted: 2026-07-31 15:13:05
