-
JOB DESCRIPTION
Essential Functions:
Direct responsibility for Profit and Loss of Stonhard business within the Region.
Compiles reports for the Director of Sales and the Regional General Manager evaluating TM-Linings' performance.
Is responsible for invoice forecasting and monitors and reports on installation performance and follow-up with customers.
Trains, monitors, and motivate the Territory Managers, Architectural Design & Engineering Reps, and Area Managers to promote and sell the Stonhard product line and services.
Responsible for the management of the Stonhard installation crews up to and including interviewing, training and profit and loss.
Assist on ADE calls involving Architects/Engineers dealing with linings related projects.
Minimum Requirements:
Five (5) or more years of successful sales management experience; sector-specific sales experience preferred.
Spends a minimum of three (3) days/week in the field with Stonhard customers and Stonhard Territory Managers.
Valid Driver's License
Physical Requirements:
While performing the duties of this position, the employee is regularly required to use hands to finger, handle, or feel and talk or hear.
The employee is frequently required to stand, walk and reach with hands and arms.
Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and ability to adjust focus.
Must be able to physically transport samples case and literature to customers (approximately 40 pounds in weight).
Must possess reliable transportation (driving time in a typical day may be up to 30%).
This position requires wearing a hard hat, safety glasses, gloves, steel-toed boots, high-visibility vest, and depending on the task, may also require ear protection, respirators, safety harnesses, and specialized protective clothing, while on the worksite.
Preferred Requirements:
Bachelor's degree in engineering, business management, or related field is preferred. Apply for this ad Online! ....Read more...
Type: Permanent Location: Chicago, Illinois
Posted: 2025-04-18 15:14:55
-
JOB DESCRIPTION
Essential Functions:
Direct responsibility for Profit and Loss of Stonhard business within the Region.
Compiles reports for the Director of Sales and the Regional General Manager evaluating TM-Linings' performance.
Is responsible for invoice forecasting and monitors and reports on installation performance and follow-up with customers.
Trains, monitors, and motivate the Territory Managers, Architectural Design & Engineering Reps, and Area Managers to promote and sell the Stonhard product line and services.
Responsible for the management of the Stonhard installation crews up to and including interviewing, training and profit and loss.
Assist on ADE calls involving Architects/Engineers dealing with linings related projects.
Minimum Requirements:
Five (5) or more years of successful sales management experience; sector-specific sales experience preferred.
Spends a minimum of three (3) days/week in the field with Stonhard customers and Stonhard Territory Managers.
Valid Driver's License
Physical Requirements:
While performing the duties of this position, the employee is regularly required to use hands to finger, handle, or feel and talk or hear.
The employee is frequently required to stand, walk and reach with hands and arms.
Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and ability to adjust focus.
Must be able to physically transport samples case and literature to customers (approximately 40 pounds in weight).
Must possess reliable transportation (driving time in a typical day may be up to 30%).
This position requires wearing a hard hat, safety glasses, gloves, steel-toed boots, high-visibility vest, and depending on the task, may also require ear protection, respirators, safety harnesses, and specialized protective clothing, while on the worksite.
Preferred Requirements:
Bachelor's degree in engineering, business management, or related field is preferred. Apply for this ad Online! ....Read more...
Type: Permanent Location: Chicago, Illinois
Posted: 2025-04-18 15:12:58
-
Our client is a leading engineering business that has been established for over half a century providing mechanical handling solutions to many industries across the globe.They are looking to strengthen their projects & design team by recruiting an additional project engineer / design engineer to their successful team.If you have previous design and or project experience within materials handling equipment and are looking to join a highly stable company who can offer a competitive salary then apply now for immediate consideration.Purpose of Job: Responsible for the engineering and technical disciplines needed to complete a project.Project Engineer / Design Engineer - Core Skillset, System layout experience, SolidWorks + AutoCAD (GA, Design & Detailing), Experience with special purpose machinery, ideally conveyors, Sheet metal, structural and fabrication design, Solid knowledge of material flow, Project Management, Managing costs, BOMs, ERP/ MRP systems, Prior experience with recycling equipment ideal but not essentialDesign Activities, To produce general arrangement drawings in 3D and/or 2D for the Projects and Sales departments.
This involves the full engineering integration of the company's inhouse products (conveyors, structures and ancillary equipment) with that of specialist third party manufacturers to create a tailored plant layout within the space available without compromising material flow., To work with the Sales team or the Projects team to optimise a layout until it reaches the point of Design Freeze at which the customer signs off the GA to allow full project launch., To ensure design quality, cost, time and standardisation are appropriately considered throughout the design and delivery process, To use SolidWorks and AutoCAD as the main design platforms for the above.Project Engineer / Design Engineer - Project Execution, Be hands-on, pro-active and own the engineering development of a project from initial concept through design, release, manufacturing, testing and commissioning., To model and detail detailed in-house products through to full release to the shopfloor producing detailed manufacturing drawings from 3D models (SolidWorks).
This will involve using the Company's standards library and customising if necessary., To create and release BOM's (Bill of Materials) within the company MRP system., To produce and maintain technical documents for the Engineering and Sales departments, operating manuals, H&S, maintenance etc., To define product technical specifications, both internal design standards and legislative/mandated industry standards., To attend site to take or check measurements, To produce technical specifications for in-house products or those we purchase., To challenge existing designs and manufacturing methods for the benefit of the Company and the customer., To work closely with the Manufacturing department, Project Engineers and Sales team to ensure designed products meet the overall requirements of the business, To provide full engineering support on the project including at site whenever needed and particularly over Installation, Commissioning and Testing., To give full support to the Project Manager over the course of the project and attend site as necessary to ensure the plant/machine is successfully commissioned and customer is delighted.Assessment and Improvement Duties, Assess which sales and/or project layouts worked well, and which did not in order to improve the design process for next time., Work on the continuous improvement of existing products and processes.
, Make any necessary adjustments to designs to reduce costs wherever possible., To analyse the costings of our proposals and projects in comparison to our competitors' Proposals to unlock the differences between what is being offered in order help the Company's Sales department become more effective with its own proposals., To remove cost from our proposals by working continuously toward smarter solutions, tighter designs, alternative third-party suppliers and new processing concepts.
To add as much functionality to every design, even if the extra functionality is included as priced extras.
Our aim is for the most efficient designs with best functionality at the most cost-effective prices., To appraise the Sales proposals to ensure the quality of our designs, offers and our approach is always at the highest possible level, visually appealing as possible, clear as possible in its concept to ensure our customers will value it.Experience & Qualifications, Experience as a Project Engineer / Design Engineer, Experience in sheet metal and fabricated product design is essential, Experience in special purpose machinery design, desirable, Experience in recycling and associated material flow, Proficient use of SolidWorks 2022 & AutoCAD 2D, Basic knowledge of electrical engineering, Creative and innovative with a desire to improve continuously, Excellent problem-solving skills, Able to efficiently communicate both written and oral, Confident decision-making ability, HNC or equivalent within mechanical / manufacturing engineering subjectDesign Engineer previous suitable job titles: Project Design Engineer, Project Engineer, Draughtsperson, Draughtsman, Draughtswoman, Draughtsperson, Design Project Engineer, Detailer, Mechanical Design Engineer, CAD Draughtsperson, CAD Drafter, Project Manager, Mechanical Project Engineer, Design Technician, Mechanical Design TechnicianPlease apply ASAP ....Read more...
Type: Permanent Location: Kettering, England
Start: ASAP
Salary / Rate: £40000.00 - £45000.00 per annum + DOE + Bens
Posted: 2025-04-17 17:47:40
-
Welder / Fabricator
Milton Keynes
Hours of work: 8am till 4.30pm Monday to Thursday & 8am till 3.30pm Friday
Pay Rate: up to £17 per hour
Are you an Experienced Welder / Fabricator within the sheet metal fabrication or signage industry? If yes, read on
.
My client is a leading manufacturer within their industry based within commutable distance from Northampton, Bedford and surrounding areas .
They are currently looking for a skilled Welder / Fabricator to join their team.
The Role - Welder / Fabricator:
- MIG Welding
- TIG Welding
- Fabrication
- Experience on guillotine, bandsaw and other machinery
- Working from drawings
- General assembly
- Working independently and as part of a team
Minimum Skills / Experience Required -Welder / Fabricator:
- Experience of MIG and TIG Welding
- Fabrication experience
- Machine operating experience
- Able to quality check own parts
- Motivated and excellent team player
- Experience within a signage industry desirable but not essential
The Package - Fabricator / Welder
- Pay rate up to £17.00
- Overtime available
- Free onsite parking
- Holiday Package
- Pension
About Precision People
Precision People is a leading recruitment agency that specializes in sourcing top talent for Engineering, Technical, Sales and Senior Management roles across a wide range of industries.
With a focus on precision and quality, their team of expert recruiters works tirelessly to match the best candidates with the right employers, ensuring that both parties benefit from a successful partnership.
Precision People has the expertise and resources to help you find the perfect role.
With a deep understanding of the industry and a commitment to excellence, they have built a reputation for delivering exceptional results and exceeding their candidates expectations.
Interested?
To apply for the Welder / Fabricator position, here are your two options:
1.
"This is the job for me! When can I start?" - Call now and lets talk through your experience.
Ask for Nina on 0116 254 5411 between 8.30am - 5.30pm.
2.
"I think I'm right for this position, but I'm not sure I have enough to get an interview" - Click "apply now" so I can read your CV and let you know.
INDTEMP ....Read more...
Type: Contract Location: Milton Keynes,England
Start: 17/04/2025
Duration: 1.0 HOUR
Salary / Rate: £17 per hour
Posted: 2025-04-17 14:51:06
-
An exciting opportunity has arisen for an experienced CNC Operator / VMC Machinist to join a well-established engineering firm.
This role offers excellent benefits and a salary range of £16 - £20per hour for 40-hour work week.
As a CNC Operator / VMC Machinist, you will be operating, programming and setting CNC milling machines to manufacture high-precision components using multi-axis capabilities.
You will be responsible for:
* Performing routine engineering tasks to support daily production.
* Conducting quality checks using appropriate measuring tools.
* Maintaining a clean and organised workstation and machinery.
* Ensuring all components are machined within required tolerances.
What we are looking for:
* Previously worked as a CNC Programmer, CNC Operator, CNC Setter, CNC Turner, CNC Machinist, CNC Miller, VMC Machinist, VMC Programmer, VMC Operator, VMC Setter, or in a similar role.
* At least 6 years' experience in CNC milling.
* Background in CNC programming and general engineering work.
* Sound knowledge of OneCNC programming software and different materials.
* Understanding of technical drawings, materials, and tooling.
* Skilled in using Heidenhain or Siemens control systems.
What's on offer:
* Competitive salary
* Company pension
* Performance bonus
* On-site parking
Apply now for this exceptional CNC Operator opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner.
In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message.
For more information see our Privacy Policy on our website.
It is important you are aware of your individual rights and the provisions the company has put in place to protect your data.
If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Type: Permanent Location: Atherstone, England
Start:
Duration:
Salary / Rate: £16 - £20 Per Hour
Posted: 2025-04-17 10:31:57
-
Position: Fast Rescue Craft/Marine Engineer
Job ID: 1613/31
Location: Lowestoft
Rate/Salary: £33900 + Overtime
Type: Permenant
HSB Technical Ltd is a specialist recruiter within the Power & Propulsion, Shipbuilding, Maritime Shipping, Energy and Subsea sectors – visit: www.hsbtechnical.com for a list of our vacancies.
We have a number of permanent and contract vacancies for multiple businesses across the UK and overseas.
The below job description will outline this position of: Fast Rescue Craft/Marine Engineer
Typically, this person will Perform repairs on our fast rescue and daughter craft aboard our fleet of Emergency Response and Rescue vessels, as well as in our in-house repair workshops.
HSB Technical’s client is an established and well-regarded business entity.
Duties and responsibilities of the Marine Engineer:
Ensuring shipboard repairs are completed safely, efficiently, and within the designated time frame.
Performing tasks to the highest level of quality and professionalism.
Maintaining up-to-date company-approved Planned Maintenance records.
Offering out-of-hours support as needed.
Actively supporting and advancing the company's QHSE policies.
Qualifications and requirements for the Marine Engineer:
The ideal candidate should be computer literate and have a full driving licence.
Good understanding of petrol 2/4 stroke engines or diesel engines.
Marine or general Engineering background preferred such as light vehicle, motorcycle, or HGV mechanical knowledge
12-volt electrics and marine industry knowledge advantageous.
This vacancy is being advertised by HSB Technical Ltd who have been appointed to act as a recruitment partner for this role. ....Read more...
Type: Permanent Location: Lowestoft, England
Start:
Duration:
Salary / Rate: £33900 - £33900 Per Annum
Posted: 2025-04-16 14:02:03
-
Holt Engineering are recruiting for Production Operative\'s to join our manufacturing client in Horsham on a Late Shift, this role is to start as soon as possible and is full time.
The role is working Monday to Friday 13:30 - 21:00 totalling 37.5 hours and is paying £12.21ph (increasing to £12.65 after 12 weeks)
Our client are experts in innovation across multiple sectors including Aerospace, Building Automation, Energy and sustainability solutions and industrial automation.
They offer a friendly and dedicated team with fantastic learning and development opportunities and they are looking for someone who is committed to developing themselves within manufacturing.
The duties for this Production Operative position will include:
- Packing
- General Assembly duties
- Following drawings and using hand and power tools when needed
- Quality checking
- Operating Machines
To be considered for this Production Opeartive role you will need:
- To be Committed to the employment contract
- Have a can do attitude and the want to progress within your career
- Comfortable with manual handling
- Ability to read and understand work orders or drawings
This is an exciting opportunity to work within a well known business looking to grow their successful team.
You will be required to pass a drugs test before starting this role and must have a valid UK passport or be able to provide your Right to Work Share Code otherwise you cannot be considered for this potion.
Please call Sam today on 07485 390946 or apply with your CV
All calls are recorded for training and quality purposes.
Further details are shown within our Privacy Policy which is displayed on our website
In line with the requirements of the Asylum and Immigration Act 1996, all applicants must be eligible to live and work in the UK As part of the recruitment process, you will be asked to provide documented evidence of eligibility please make sure you have this ....Read more...
Type: Permanent Location: Horsham,England
Start: 16/04/2025
Salary / Rate: £12.21 per hour
Posted: 2025-04-16 10:05:05
-
Holt Engineering are recruiting for Production Operatives to join our manufacturing client in Assembler, this role is to start as soon as possible and is full time.
The role is working day shifts, Monday - Friday , totalling 37.5hours and is paying £12.21
Our client are experts in innovation across multiple sectors including Aerospace, Building Automation, Energy and sustainability solutions and industrial automation.
They offer a friendly and dedicated team with fantastic learning and development opportunities and they are looking for someone who is committed to developing themselves within manufacturing.
The duties for this Production Operative position will include:
- Packing
- General Assembly duties
- Following drawings and using hand and power tools when needed
- Quality checking
- Operating machines
To be considered for this Prodcution Operative role you will need:
- To be Committed to the employment contract
- Have a can do attitude and the want to progress within your career
- Comfortable with manual handling
- Ability to read and understand work orders or drawings
This is an exciting opportunity to work within a well known business looking to grow their successful team.
You will be required to pass a drugs test before starting this role and must have a valid UK passport or be able to provide your Right to Work Share Code otherwise you cannot be considered for this potion.
Please call Sam today on 07485 390946 or apply with your CV
All calls are recorded for training and quality purposes.
Further details are shown within our Privacy Policy which is displayed on our website
In line with the requirements of the Asylum and Immigration Act 1996, all applicants must be eligible to live and work in the UK As part of the recruitment process, you will be asked to provide documented evidence of eligibility please make sure you have this ....Read more...
Type: Contract Location: SouthendonSea,England
Start: 16/04/2025
Duration: 1.0 HOUR
Salary / Rate: £12.21 per hour
Posted: 2025-04-16 08:56:04
-
Catfoss Recruitment Ltd are currently in partnership with a globally respected R&D company that is looking to recruit am Instrumentation Engineer to their expanding team on a permanent basis.We are seeking to recruit an Instrumentation Engineer whose primary function will be to manufacture and install instrumentation for use within our R&D testing facilities.
This will include but is not limited to; equipment calibration, the set-up of specialised measurement/monitoring equipment, model assembly and integration for test, troubleshooting and assisting in the operation of facilities.The successful candidate will be expected to demonstrate the drive and commitment necessary for ensuring that work is completed in line with challenging schedule requirements whilst maintaining a clean, safe working environment.
To succeed in this position, you must be flexible in your approach to working hours, which will require shift working, and able to respond quickly to a changing workload.Instrumentation Engineer - Working hours: Mon - Fri, Full time, 40 hours per week, shift work required when testing facilities in operation (typical hours are 07.00 - 15:00 and 14.00 - 22:00 on a rotating weekly basis) office hours otherwiseInstrumentation Engineer - Main duties and responsibilities will include: -, Manufacture of bespoke wiring looms and assemblies with reference to circuit drawings / wiring lists., Hand soldering of fine components at the work-bench and on test models., Miniature strain-gauge installation and wiring., Calibration, maintenance, testing and fault-finding of sensors, signal conditioning and data acquisition systems down to component level., Specify required instrumentation from customer specification., Support the design and integration of instrumentation into customer models and rigs., Work as part of a team, involved in the preparation and assembly of models and rigs for testing to defined quality standards, giving consideration to schedule and costs;, Provide instrumentation support for projects in all of company test facilities., Assist in the operation of company test facilities., Maintenance of the instrumentation hardware and records., Preparation and installation of specialist optical measurement systems in test facilities;, Making recommendations for design, process or hardware modifications to support continuous improvement within the department., General departmental duties such as record maintenance, model storage, organization of equipment, rig maintenance,, Perform tasks with conformance to company Health & Safety Policy and Quality Standards., Ability to work in confined spaces and at heights., Flexible approach to shift working patterns & overtime as required., Undertaking training, where necessary, in support of the above duties, to ensure that safe working practices are observedTraining will be given in all of the specialist activities associated with this position.Instrumentation Engineer - Qualifications & ExperienceThe successful candidate will be an experienced time served technician, preferably educated to HNC/HND Electrical and Electronic Engineering level (or equivalent) with experience of working in an R&D and/or commercial environment.This is an exciting permanent opportunity for the right person to be part of a successful and highly skilled engineering company.
In return, we offer a range of benefits including: a competitive salary and pension scheme; free parking; employee assistance programme; optional sharesave scheme, private health insurance and 26 days' annual leave plus Bank Holidays (increasing with length of service after 5 years' service)Instrumentation Engineer previous suitable job titles: Instrumentation Technician, C&I Technician, EC&I Technician, Controls Technician etc…
Commutable from Bedford, St Neots, Milton Keynes, Northampton, Wellingborough, Biggleswade etc...The successful candidate must satisfy security clearance requirements - including the last 5 years continual UK residency.Please apply ASAP ....Read more...
Type: Permanent Location: Bedford, England
Start: ASAP
Salary / Rate: £35000.00 - £40000.00 per annum + DOE +BUPA,Pension,Life,Sharesave
Posted: 2025-04-15 19:24:51
-
An opportunity for a Sheet Metal Fabricator /Welder to join our client that manufacture specialist products for various clients all over the World.
This role is a 4 day working week - Monday to Thursday and Tuesday to Friday( early finish on a Friday).
Our client has already engaged in the delivery of a wide range of high-profile projects and on the back of this they have been recently awarded another major contract and thus are looking to add a Sheet Metal Fabricator/Welder on a permanent contract.
This is a fantastic opportunity to join our client that has over 70 years of experience in the design, manufacture, and sales of specialist products.
As the worldwide leader in their market segment, Our client export products to more than 100 countries.
Skills & Experience:
Weld and fabricate a variety of bespoke components using stainless steel, nickel alloys and mild steel materials, gauge of sheet metal generally between 0.9mm & 6mm thickness.
Weld and fabricate frameworks from mild steel rolled, stainless steel, hollow section and angle iron to a high standard.
Read engineering drawings and translate that into an end product with minimum supervision.
Achieve a high standard of finish/tolerance on bespoke fabricated products.
Complete problem logs regarding issues with drawings and materials.
Duties:
Welding and Fabrication of bespoke products, including sheet metal, working within a light / medium fabrication working environment.
MIG, TIG and spot-welding.
To work to fine tolerances.
Accuracy and attention to detail.
....Read more...
Type: Permanent Location: Dronfield, England
Start: ASAP
Salary / Rate: £32000 - £37000 per annum
Posted: 2025-04-15 18:00:07
-
An opportunity has arisen for aProperty Maintenance Technician with 3 years experienceto join a well-established provider of serviced accommodation, catering to both corporate and leisure guests.
This full-time role offers excellent benefits and a starting salary of £27,000.
As a Property Maintenance Technician, you will carry out daily general maintenance across residential sites, addressing issues such as leaks, Wi-Fi faults, appliance breakdowns, first-fix electrics, initial boiler diagnostics, and basic carpentry tasks.
This role requires occasional travel across the M25 and nearby Home Counties.
You will be responsible for:
* Diagnosing and resolving faults across a variety of domestic systems.
* Carrying out minor repairs including appliances, lighting, heating systems, and general fittings.
* Managing time effectively to prioritise and respond to maintenance requests promptly.
What we are looking for:
* Previously worked as a Property Maintenance Technician, Facilities Technician, Handyman, Property Maintenance Engineer, Electrician, Handyperson or in a similar role.
* At least 3 years of experience in property maintenance.
* Experience in general maintenance within domestic environments.
* Willingness to join the emergency call-out rota (evenings and weekends, approx.
1 in 4) after training.
* Valid UK driving licence.
What's on offer:
* Competitive salary
* Company pension
* Company vehicle
* Staff discounts
Apply now for this exceptional opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner.
In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message.
For more information see our Privacy Policy on our website.
It is important you are aware of your individual rights and the provisions the company has put in place to protect your data.
If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Type: Permanent Location: London, England
Start:
Duration:
Salary / Rate: £27000 Per Annum
Posted: 2025-04-15 15:27:43
-
JOB DESCRIPTION
As our Environmental, Health, & Safety Manager Manager you are to ensure EHS compliance of the facilities by reviewing, evaluating, and analyzing the work environment and designing programs and procedures to control, eliminate, and prevent disease or injury. Solving challenges is the very foundation of who we are.
After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint.
When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution.
Today, that discovery is Rust-Oleum Corporation. The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today.
When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry.
Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry. Here is what you will expect: Order suspension of activities that pose threats to workers' health and safety. Recommend measures to help protect workers from potentially hazardous work methods, processes, or materials. Investigate accidents to identify causes and to determine how such accidents might be prevented in the future. Investigate the adequacy of ventilation, exhaust equipment, lighting, and other conditions that could affect employee health, comfort, or performance. Develop and maintain hygiene programs such as noise surveys, continuous atmosphere monitoring, ventilation surveys, and asbestos management plans. Inspect and evaluate workplace environments, equipment, and practices, in order to ensure compliance with safety standards and government regulations. Collaborate with engineers and physicians to institute control and remedial measures for hazardous and potentially hazardous conditions or equipment. Conduct safety training and education programs, and demonstrate the use of safety equipment. Provide new-employee health and safety orientations, and develop materials for these presentations. Collect samples of dust, gases, vapors, and other potentially toxic materials for analysis. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.
Required Experience:
Minimum of Bachelor's Degree in Engineering, Environmental Science, or related field. EHS-related certification(s) preferred. Knowledge of Federal and State regulations including air programs, hazardous waste management, hazardous material management, TSCA, stormwater, OSHA general industry, DOT requirements. 3+ years of environmental health and safety experience preferred. Apply for this ad Online! ....Read more...
Type: Permanent Location: Huntington, West Virginia
Posted: 2025-04-15 15:12:40
-
JOB DESCRIPTION
As our Environmental, Health, & Safety Manager Manager you are to ensure EHS compliance of the facilities by reviewing, evaluating, and analyzing the work environment and designing programs and procedures to control, eliminate, and prevent disease or injury. Solving challenges is the very foundation of who we are.
After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint.
When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution.
Today, that discovery is Rust-Oleum Corporation. The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today.
When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry.
Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry. Here is what you will expect: Order suspension of activities that pose threats to workers' health and safety. Recommend measures to help protect workers from potentially hazardous work methods, processes, or materials. Investigate accidents to identify causes and to determine how such accidents might be prevented in the future. Investigate the adequacy of ventilation, exhaust equipment, lighting, and other conditions that could affect employee health, comfort, or performance. Develop and maintain hygiene programs such as noise surveys, continuous atmosphere monitoring, ventilation surveys, and asbestos management plans. Inspect and evaluate workplace environments, equipment, and practices, in order to ensure compliance with safety standards and government regulations. Collaborate with engineers and physicians to institute control and remedial measures for hazardous and potentially hazardous conditions or equipment. Conduct safety training and education programs, and demonstrate the use of safety equipment. Provide new-employee health and safety orientations, and develop materials for these presentations. Collect samples of dust, gases, vapors, and other potentially toxic materials for analysis. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.
Required Experience:
Minimum of Bachelor's Degree in Engineering, Environmental Science, or related field. EHS-related certification(s) preferred. Knowledge of Federal and State regulations including air programs, hazardous waste management, hazardous material management, TSCA, stormwater, OSHA general industry, DOT requirements. 3+ years of environmental health and safety experience preferred. Apply for this ad Online! ....Read more...
Type: Permanent Location: Huntington, West Virginia
Posted: 2025-04-15 15:12:19
-
Our client, a well respected commercial law firm, are recruiting for a Commercial Litigation Solicitor to join their team in Teesside, Darlington.
The role would suit a Commercial Litigation Solicitor with upwards of 2 years' PQE gained within a commercial litigation team.
The firm are also keen to speak to candidates who specialise in either property or construction litigation.
The firm are well known for their work in commercial litigation as well as other commercial areas.
They have an excellent reputation both locally in Teesside and the North of England, and employ a number of experienced Solicitors at all levels.
The firm have an excellent career progression pathway, which is evidenced by the paths taken by their existing staff force.
They attract Solicitors from renowned law firms, locally, nationally and internationally, and have a high staff retention rate/ longevity of staff.
The role will involve handling a caseload of commercial disputes, to include property litigation, construction litigation and general commercial litigation.
They have a strong team of qualified Solicitors, which they are looking to expand.
The team pride themselves in variety of work, they act for a wide client base to include agricultural firms, engineering and manufacturing companies, surveyors, accountants and other professionals.
What's on offer?:
Competitive salary, dependent on experience.
Low chargeable hours target.
Hybrid working/ flexibility around hours.
25 days' holiday plus Christmas shut down (increases with length of service).
Genuine career progression opportunities.
Quality work locally, regionally and nationally, regular client contact.
Opportunities to grow the team.
To apply for this role, please do so via the link or contact Chloe Murphy in the Private Practice East division on 0113 467 9783. ....Read more...
Type: Permanent Location: Darlington, England
Salary / Rate: £40000 - £55000 per annum
Posted: 2025-04-15 10:10:35
-
An exciting opportunity has arisen for a Security Engineer to join a well-established company, specialising in fire and security system installation and maintenance.
This is a part-time role working 1-2 days per week offering excellent benefits and a competitive salary in per hour.
As a Security Engineer, your role will include call-outs, routine maintenance, and small installations throughout the Kensington and Chelsea area.
You will be responsible for:
* Installing and maintaining intruder alarms, CCTV, access control, and fire detection systems.
* Diagnosing faults and ensuring systems are fully operational.
* Performing planned maintenance and emergency repairs on-site.
* Carrying out general and emergency lighting installations.
* Ensuring all work is completed in line with industry standards and safety regulations.
What we are looking for:
* Previously worked as a Security Engineer or in a similar role.
* Experience within intruder alarm and CCTV systems.
* Skilled working with leading security systems and manufacturers (e.g., Texecom, Hikvision, Paxton, etc.).
* Understanding of British Standards and compliance requirements for security systems.
* Valid UK driving licence.
What's on offer:
* Competitive salary
* Pension scheme
Apply now for this exceptional Security Engineer opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner.
In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message.
For more information see our Privacy Policy on our website.
It is important you are aware of your individual rights and the provisions the company has put in place to protect your data.
If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Type: Permanent Location: London, England
Start:
Duration:
Salary / Rate:
Posted: 2025-04-14 14:57:25
-
MOT Tester / Mechanic Telford
Salary: £30,000 - £32,000 Basic | OTE: £34,200 - £36,200
Location: Telford
Role: MOT Tester with Mechanical Duties
Join a fast-growing, national automotive company with excellent career prospects! We are looking for a skilled MOT Tester / Technician to become part of a dynamic and expanding team.
This role includes conducting MOT tests alongside general mechanical repairs and servicing.
What We Offer:
Competitive salary with strong OTE potential
Stability within a rapidly growing national company
Career progression and training opportunities
Supportive and professional work environment
What We Need:
Qualified MOT Tester (Class 4)
Level 3 Vehicle Technician (or equivalent)
Experience in servicing, repairs, and diagnostics
Strong attention to detail and a team player
If you're an experienced MOT Tester with mechanical skills looking for a great opportunity, apply today!
Apply Now!
Holt Recruitment are a leading Recruitment agency specialising in Automotive, Motor trade, Engineering, OEM and various related industries.
We are recruiting across the UK for Vehicle Technician, Vehicle Mechanic, Commercial Vehicle Technician, Diagnostic Technician, Senior Technician, Master Technician, Mobile Vehicle Technician, PDI Technician, Prep Technician, MOT Tester, Fast Fit Technician, LCV Technician, Light Commercial Technician, HGV Technician, Bus Technician, LGV Technician, HGV Engineer, HGV Mechanic, HGV Fitter
Holt Recruitment cover a variety of different sectors including Technical, Mechanical, Engineering, Sales, Service, Aftersales, Bodyshop, Fleet & Rental Management, Accounts, Finance, Marketing, & Payroll, Managerial, Logistics, Parts, Administration, Call Centre / Contact Centre, Senior Appointments, Head Office Positions and Confidential Appointments ....Read more...
Type: Permanent Location: Telford,England
Start: 14/04/2025
Salary / Rate: £32000 per annum, Benefits: OTE £36,200
Posted: 2025-04-14 12:39:03
-
An opportunity has arisen for aProperty Maintenance Technician with 3 years experienceto join a well-established provider of serviced accommodation, catering to both corporate and leisure guests.
This full-time role offers excellent benefits and a starting salary of £27,000.
As a Property Maintenance Technician, you will be providing day-to-day general maintenance across residential properties, ensuring high standards and minimal disruption to guests.
You will be responsible for:
* Conducting both reactive and planned maintenance tasks across multiple properties.
* Diagnosing and resolving faults across a variety of domestic systems.
* Carrying out minor repairs including appliances, lighting, heating systems, and general fittings.
* Managing time effectively to prioritise and respond to maintenance requests promptly.
* Participating in a rota-based on-call schedule, including occasional weekend cover.
What we are looking for:
* Previously worked as a Property Maintenance Technician, Facilities Technician, Handyman, Property Maintenance Engineer, Electrician, Handyperson or in a similar role.
* At least 3 years of experience in property maintenance.
* experience in general maintenance within domestic environments.
* High level of customer service and professionalism when dealing with clients and guests
* Valid UK driving licence.
What's on offer:
* Competitive salary
* Company pension
* Company vehicle
* Staff discounts
Apply now for this exceptional opportunity to work with a dynamic team and further enhance your career.
Important Information: We endeavour to process your personal data in a fair and transparent manner.
In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone or text message.
For more information see our Privacy Policy on our website.
It is important you are aware of your individual rights and the provisions the company has put in place to protect your data.
If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Type: Permanent Location: London, England
Start:
Duration:
Salary / Rate: £27000 Per Annum
Posted: 2025-04-14 12:33:05
-
Our client is a consistently busy, top end Construction Litigation team, focusing largely on Construction related professional indemnity disputes.
They are keen to recruit someone who either has dedicated construction litigation experience already, or who perhaps does this as part of what they do at the moment and want to focus on it going forward.
The work on offer is of an exceptional quality.
You would find yourself working as part of a team on some of the most complex disputes available at the moment, alongside this you would also have a caseload of smaller but still interesting matters.
The work is from both the construction and engineering sectors and they find themselves acting for the full range of clients including employers, general contractors, architects, engineers, quantity surveyors, project managers, design and build contractors and specialist sub-contractors.
Whilst much of the work is UK based there are a good number of overseas disputes too and they use the full spectrum of dispute resolution methods open to them.
The team are long established and successful, they are supportive and have the benefit of top systems and technology.
Given the way that they work they are looking for someone who is team spirited, professional and hardworking.
How To Apply
If you would like to hear more about this Construction Solicitor role in Leeds then contact Sophie Linley on 0113 236 6711.
To hear about the other opportunities we have on then please visit our website.
Alternatively, if you know of anyone who would be suitable for this role then please let them or us know as we offer a reward for successful referrals.
For full terms please see our website. ....Read more...
Type: Permanent Location: Leeds, England
Salary / Rate: £46000 - £58000 per annum
Posted: 2025-04-14 11:19:48
-
2nd Line IT Support Engineer
2nd Line IT Support Engineer - Social Messaging Platform - Horsham, West Sussex
(Tech stack: 2nd Line IT Support Engineer, Windows, 1st Line, Windows Server, Office 365, Active Directory, Exchange, Intune, Azure, Microsoft Endpoint Manager, ITIL, Service Desk, Desktop Support, Mobile Device Management, 2nd Line IT Support Engineer)
In 2012 our client launched a social messaging platform that has been taking the US by storm.
After an extremely successful period our client has decided to hop across the Atlantic, in a bid to expand their sphere of influence and take up a firm foothold in the UK and European markets.
A number of new offices are being opened in the UK and our client is looking for talented, enthusiastic and passionate 2nd Line IT Support Engineer (Windows) with strong exposure to 1st line duties and a solid foundation in the Microsoft / Windows technology stack.
You will be joining a collaborative IT team supporting a Windows-based environment and providing support across a range of user devices including PCs, laptops and mobile phones.
You will be the go-to person for escalated support queries and play a vital role in ensuring end users remain productive and satisfied with the IT service provided.
Successful 2nd Line IT Support Engineer (Windows) candidates should be able to demonstrate strong knowledge of some or all of the following (training will be provided into any technologies you do not have exposure to): Windows 10/11, Office 365, Active Directory, basic Azure admin, Microsoft Endpoint Manager/Intune, Exchange Online and general desktop / laptop troubleshooting.
Experience with mobile device support (iOS/Android), ticketing systems and remote access tools is highly desirable.
ITIL foundation knowledge would be a bonus but is not essential.
All 2nd Line IT Support Engineer (Windows) positions come with the following benefits:
Stock worth £15,000.
The stock would be in their parent company (a multi-billion dollar company).
You would be able to sell up to a third of your stock per year which would therefore be worth £5,000 per year to you.
30 days holiday (plus 8 UK Bank Holidays).
Flexible working hours
An early finish on Fridays that fall in the months of June, July and August.
£4,000 training allowance including attendance of Microsoft events and conferences.
4 days a month innovative time.
Free gym membership including yoga sessions.
Summer BBQs.
Birthday bonus package - including time off work on your birthday, dinner at a top restaurant or a paid day trip to a European destination.
Location: Horsham, West Sussex, UK.
Please note you will be expected travel to various offices hence you will require a valid driver's licence.
Salary: £30,000 - £35,000 + Bonus + Pension + Benefits
Applicants must be based in the UK and have the right to work in the UK.
Noir continues to be the leading Microsoft recruitment agency; we can help you make the right career decisions!
NOIRUKTECHREC
NOIRUKREC
NC/MJ/ITSU ....Read more...
Type: Permanent Location: Horsham, England
Start: ASAP
Posted: 2025-04-14 02:01:22
-
JOB DESCRIPTION
Our unique summer program has been specially designed to provide a strong foundation for your career.
Depending on your focus, you will be partnered with a senior mentor and work alongside industry experts while also learning construction project management technology.
You will gain real experience on jobsites that could include arenas and stadiums, hospitals, historical landmarks, commercial properties, and some of the best schools in our country.
During your time in our program, you will also become certified in OSHA's 10-hour safety course at no cost to you.
Interested? Apply today! We are seeking students in their junior or senior year in Construction Management, Architecture, Engineering, Business, or students interested in a career in construction and committed to building both a better world and a better future. The hourly rate for applicants in this position generally ranges $18/hour.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Minneapolis, Minnesota
Posted: 2025-04-12 15:10:49
-
JOB DESCRIPTION
Our unique summer program has been specially designed to provide a strong foundation for your career.
Depending on your focus, you will be partnered with a senior mentor and work alongside industry experts while also learning construction project management technology.
You will gain real experience on jobsites that could include arenas and stadiums, hospitals, historical landmarks, commercial properties, and some of the best schools in our country.
During your time in our program, you will also become certified in OSHA's 10-hour safety course at no cost to you.
Interested? Apply today! We are seeking students in their junior or senior year in Construction Management, Architecture, Engineering, Business, or students interested in a career in construction and committed to building both a better world and a better future. The hourly rate for applicants in this position generally ranges $18/hour.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Minneapolis, Minnesota
Posted: 2025-04-12 15:10:30
-
JOB DESCRIPTION
Essential Functions:
Direct responsibility for Profit and Loss of Stonchem business within the Region. Spend a minimum of 4 days per week in the field with Stonhard customers and Stonhard Territory Managers. Compiles reports for Director of Stonchem Linings who shares with VP - Sales, VP - Business Development and General Managers evaluating TM Linings performance.
Responsible for invoice forecasting, monitors and reports on installation performance and follow-up with customers. Trains, monitors and motivates the Territory Managers, Architectural Design & Engineering Reps and Area Managers to promote and sell the Stonchem product line and services.
Assist on AD&E calls involving Architects/Engineers dealing with linings related projects. Meets or exceed Stonhard's minimum activity standards for quotes and orders as set by Stonhard sales management.
Driving time in a typical day may be up to 30%.
Minimum Requirements:
Two (2) plus related experience, preferably in industrial, construction or commercial industry. Spend a minimum of 4 days per week in the field with Stonhard customers. Required travel can be up to 50%/time in the field. Ability to proactively identify opportunities and quickly implement solutions. Demonstrated excellent oral and written communication, presentation, organization and planning skills. Must be very flexible and able to work in a self-directed, rapidly changing environment. A proven ability to manage projects and clearly communicate key project tasks. Must be computer literate with experience using technology and customer relationship management software (Salesforce.com), and Microsoft 365. You must possess a valid driver's license and reliable transportation.
Preferred Requirements:
Bachelor's Degree
Physical Requirements:
Spend a minimum of 4 days per week in the field with Stonhard customers and Stonhard Territory Managers. Must be able to physically transport samples case and literature to customers (approximately 40 lbs in weight) Driving time in a typical day may be up to 30%. While performing the duties of this position, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee is frequently required to stand, walk and reach with hands and arms. The employee is occasionally required to sit, stoop, kneel, crouch, or crawl. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and ability to adjust focus. Apply for this ad Online! ....Read more...
Type: Permanent Location: Chicago, Illinois
Posted: 2025-04-11 15:11:24
-
JOB DESCRIPTION
Essential Functions:
Direct responsibility for Profit and Loss of Stonchem business within the Region. Spend a minimum of 4 days per week in the field with Stonhard customers and Stonhard Territory Managers. Compiles reports for Director of Stonchem Linings who shares with VP - Sales, VP - Business Development and General Managers evaluating TM Linings performance.
Responsible for invoice forecasting, monitors and reports on installation performance and follow-up with customers. Trains, monitors and motivates the Territory Managers, Architectural Design & Engineering Reps and Area Managers to promote and sell the Stonchem product line and services.
Assist on AD&E calls involving Architects/Engineers dealing with linings related projects. Meets or exceed Stonhard's minimum activity standards for quotes and orders as set by Stonhard sales management.
Driving time in a typical day may be up to 30%.
Minimum Requirements:
Two (2) plus related experience, preferably in industrial, construction or commercial industry. Spend a minimum of 4 days per week in the field with Stonhard customers. Required travel can be up to 50%/time in the field. Ability to proactively identify opportunities and quickly implement solutions. Demonstrated excellent oral and written communication, presentation, organization and planning skills. Must be very flexible and able to work in a self-directed, rapidly changing environment. A proven ability to manage projects and clearly communicate key project tasks. Must be computer literate with experience using technology and customer relationship management software (Salesforce.com), and Microsoft 365. You must possess a valid driver's license and reliable transportation.
Preferred Requirements:
Bachelor's Degree
Physical Requirements:
Spend a minimum of 4 days per week in the field with Stonhard customers and Stonhard Territory Managers. Must be able to physically transport samples case and literature to customers (approximately 40 lbs in weight) Driving time in a typical day may be up to 30%. While performing the duties of this position, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee is frequently required to stand, walk and reach with hands and arms. The employee is occasionally required to sit, stoop, kneel, crouch, or crawl. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and ability to adjust focus. Apply for this ad Online! ....Read more...
Type: Permanent Location: Chicago, Illinois
Posted: 2025-04-11 15:10:47
-
Electro Mechanical Technician
Location: Romsey
Salary: £30-35k
Electro Mechanical Technician Overview:
Holt Engineering are seeking two motivated Electro Mechanical Technician to join our client's growing, cross-functional team.
You will play a key role in building and testing advanced electrical machines for multiple sector applications.
This involves a variety of tasks, including operating, fitting, testing, maintaining, and calibrating tools, products, machines, and equipment.
Electro Mechanical Technician Responsibilities:
- Assembly and testing of electro-mechanical machine assemblies and sub-assemblies.
- General housekeeping and improvement of production areas.
- Installing components, assemblies, and sub-assemblies.
- Daily maintenance of machines and equipment.
- Modification of components and sub-assemblies.
- Operating production machinery and equipment.
- Setting up machinery and equipment for other team members.
- Providing support to the Engineering development team.
Electro Mechanical Technician Requirements:
- Strong communication skills with the ability to work collaboratively with technicians and engineers.
- Technical proficiency in mechanical fitting and electrical installation and assembly.
- Ability to read and interpret engineering drawings and other technical documents.
- A high level of care and attention to detail with a focus on quality.
- Takes responsibility for ensuring high-quality work, adhering to processes and procedures.
- Compliance with Company best working practices and health and safety guidelines.
- IT literate (competent with Microsoft Office applications).
- Highly organised with effective time management skills to ensure tasks and objectives are met.
- Adaptable to work in a changing environment with the flexibility to learn new systems.
- Demonstrates enthusiasm and is personally committed to achieving objectives.
- Level 3 Diploma in Electro Mechanical Engineering or equivalent.
- Demonstrable experience in an electro mechanical machine assembly environment.
How to apply for the Electro Mechanical Technician role:
Please apply directly or contact Harry on 07739 277675 or at harry.parsons@holtengineering.co.uk ....Read more...
Type: Permanent Location: Northam,England
Start: 11/04/2025
Salary / Rate: £30000 - £35000 per annum
Posted: 2025-04-11 13:10:06
-
Press Brake setter / Operator
Permanent Opportunity
Paying up to £15 per hour
Permanent role Located just off the M11 this role is within 25 miles of London, and within commutable distance from Cambridge, Bishops Stortford and Hertford.
Our client is looking for an experienced Sheet metal worker with Amada Press brake setting and operating experience to join their expanding team.
Interviewing immediately
Start time 07.00.
Finish time 17.00.
Monday to Friday
JOB PURPOSE
To report to the factory Supervisor
To set and operate an Amada Press Brake
To set up a laser cutting machine, Turret punch, drilling and milling machines
General Sheet Metal Fabrication
To read all engineering drawings
Operate an FLT
Press Brake Setter / Operator
CANDIDATE:
- Ability to set and Operate an Amada Press Brake
- Ability to set up a laser cutting machine, Turret punch, drilling and milling machines
- Fabrication Experience
- Highly skilled apprentice trained fabricator who can read engineering drawings cope with varied jobs and materials.
- National FLT Licence
- More than 3 years industry experience setting and operating an Amada Press brake
- Candidate should be able to work on their own initiative.
- Willing to learn and undertake courses as and when needed
Interested? To apply for the Amada Press Brake role
, here are your two options:
- "This is the job for me! When can I start?" - Call now and lets talk through your experience.
Ask for Stacey Catterall on 0116 2545411 between 8am - 5pm or email staceyc@precisionrecruitment.co.uk outside of these hours.
- "I think I'm right for this position, but I'm not sure I have enough to be get an interview" - Click "apply now" so I can read your CV and let you know
Precision are committed to keeping our candidates informed and offer a guaranteed response within 7 days when applying through the application system
Ref: Amada Press Brake
INDTEMP ....Read more...
Type: Contract Location: Stevenage,England
Start: 11/04/2025
Duration: 1.0 HOUR
Salary / Rate: £15 per hour
Posted: 2025-04-11 10:05:16
