-
JOB DESCRIPTION
Position Summary: This position is responsible for developing, instituting, and overseeing all aspects of Environmental, Health, Safety and Corporate Compliance.
This includes but is not limited to ensuring the company complies with all federal and state health, safety and environmental laws, regulations and reporting standards.
Essential Functions:
Works with all personnel at the facility to make sure all safety and environmental regulations are met and are being followed;
Primarily responsible for both the overview of compliance as well as day-to-day operations with respect to safety and regulatory permits and reports.
Ensure all are met with best practices and are compliant.
This pertains to Federal, State, and Local regulations i.e.
RCRA, EPA reporting requirements both directly to the EPA as well as those governed by Missouri DNR Air Pollution and HAZ WASTE;
Conduct and coordinate on-site daily inspections to audit physical conditions and safe work practices.
Including but not limited to: PPE for specific tasks, Emission Points, Work Permits, General Housekeeping, Spill Kits, Satellite and Pre-Transport Waste Storage Areas, Fire Extinguishers, Shower and Eye Wash, etc.;
Be aware concerning all city, state and federal compliance regulations;
Conduct and improve training programs related to all aspects of safety and compliance in the facility for all personnel.
This includes but not limited to: new employee training and refreshers, forklift safety, OSHA, hazwoper, contractor orientation, FOT/IATA, etc.
All training should be conducted in a timely manner and ensure additional process specific trainings are sufficient to maintain safety for employees.
Maintain and update all plans required at the facility, including but not limited to: General Operating Permit, Hazardous Waste Generator Compliance, Storm water Pollution Prevention Plan, Spill Prevention Control and Countermeasures, Emergency Response Plan, Compressed Gas Plan, Contingency Plans, Hazard Communication Program and Security Plans;
Essential reports such as TRI, Tier II, RMP, Quarterly and Biennial Waste Reporting (and their due dates) is the responsibility of your department.
Assistance will be given from other staff to prepare and maintain this data;
Participate and help conduct Safety Committee meetings;
Works closely with HR manager and Vice President/CFO to become responsible for the hands-on administration of the workers' compensation program.
Maintain the OSHA 300 log and tracking.
Manage medical monitoring program;
Maintain and improve environmental compliance programs related to hazardous wastes, air permitting, water pollution control, and community right-to-know programs;
Select and maintain safety equipment and safety supplies on site.
To include purchasing and keeping track of the supplies and managing the costs of these supplies;
Reduce waste generation and costs of disposal.
Upgrade monitoring, testing and instrumentation of waste and byproducts.
Schedule and maintain all documentation related to all waste pickups, including certifying and recertifying waste profiles;
Improve overall safety, housekeeping and reliability of plant work areas and compliance systems;
Member of the PSM team;
Implement and coordinate the documentation and schedule for preventative maintenance of equipment through the Faciliworks program.
Maintain, create and close work orders.
Keep Asset List up to date within Faciliworks database.
Train all maintenance personnel on these procedures and manage to ensure proper procedures are followed;
Ensure all permits (LOTO, Hot Work, Confined Space Entry), as well as MOC's are done correctly, and properly filed and archived.
Become proficient in generating, reviewing and updating SDS's and Labels for our product line.
This will be a multi-member team as GHS is being implemented in 2015, however, in 2016 and future years' maintenance of this system will become part of your department;
Supervise, coach, motivate and develop staff.
Minimum Requirements:
Bachelor's degree in environmental management, Chemistry, Engineering, or a related discipline, or high school diploma if degree with 5 years or more of direct experience in Process Safety Management, or suitable combination of education and relevant experience as described;
Specialized technical/aptitude experience: minimum of 3 years' experience in a manufacturing environment and demonstrated proficiency with manufacturing processes.
Previous work and/or substantial knowledge of, including commonly used concepts, practices and procedures, within the thermoset polymer industry is a strongly considered asset;
Demonstrated comprehensive knowledge of office and facilities coordination and basic leadership and management knowledge; (if applicable to position)
Demonstrated organization, facilitation, communication and presentation skills; (if applicable to position)
Ability to prioritize workflow and organize diverse material and ability to handle multiple, competing and changing priorities; ability to perform effectively without supervision and within established time limits and ongoing deadlines;
Ability to interact and communicate effectively and professionally verbally and in writing, and to provide exceptional service internally and externally;
Relevant computer skills for this position include knowledge and experience with Microsoft Office applications (Word, Excel, PowerPoint) and web-based applications.
Experience using SAGE Platinum for Windows preferred.
Displays adaptability in learning the use of relevant software and displays comprehension of fundamental computer practices and database management;
Demonstrated ability to serve as a knowledgeable resource to the organization's management team that provides leadership and direction;
Demonstrated leadership and vision managing staff groups and major projects or initiatives;
Outstanding interpersonal relationship building and employee coaching and development skills.
Benefits and Compensation
The pay range for applicants in this position generally ranges between $120,000.00/year and $140,000/year.
The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law.
In addition to career advancement and growth, continuous training, and mentoring opportunities, Arnette Polymers offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans.
Arnette Polymers is a division of The Stonhard Group, an RPM International company (NYSE: RPM) that is headquartered in Maple Shade, NJ and has more than 100 years of experience manufacturing and installing high performance, seamless floors throughout the world.
We manufacture and install long-term floor, wall and lining solutions to markets including, but not limited to: food & beverage, general manufacturing, pharmaceutical, chemical processing, education, healthcare, government, technology and hospitality.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
Pay: $120,000.00 - $140,00.00 per yearApply for this ad Online! ....Read more...
Type: Permanent Location: Richmond, Missouri
Posted: 2026-09-10 15:12:00
-
JOB DESCRIPTION
The Process Engineer is responsible for evaluating and improving processes within Stonhard manufacturing operations.
Additionally, the Process Engineer is responsible for implementation of continuous improvement initiatives, capital project support, production efficiency, maintenance process improvements, and equipment reliability.
Essential Functions
Lead root cause analysis for process failures.
Develop and maintain standard work instructions.
Develop and maintain Process Failure Mode Effect Analysis for areas of responsibility.
Improves production line efficiency to show a measurable increase in OEE.
Support maintenance in equipment troubleshooting.
Working knowledge of I/O, PLC, and 24V controls is preferred.
Programming a plus.
Experience with Manufacturing Execution Systems preferred.
Design and coordinate fabrication of manufacturing support components.
Support day-to-day production operations.
Re-engineer existing equipment to meet new optimization, reliability, safety, throughput, and process requirements.
Evaluate and make recommendations, which will increase output and decrease costs by addressing/improving workflow, ergonomics, time/motion characteristics, cycle-times, set-up times, waste, etc.
Confer with management and general staff to implement plans and recommendations.
Ensure CI project goals are met and sustained through the development of effective control plans.
Ensure Continuous Improvement processes and procedures are followed and adhered to through auditing and process confirmation practices.
Lead C.I.
initiatives in areas of 5S, Waste Reduction, Value-Stream Mapping, etc.
Ensure appropriate validations are completed as part of solution implementation.
Downtime Loss Analysis and Reduction - Start-up & Changeovers downtime improvement
Equipment failure (Structured failure analysis 5W's, Fishbone analysis)
Minimum Requirements
Bachelor's degree in engineering
Lean and/or Six Sigma preferred but not required.
Minimum 5 years of manufacturing experience preferably in a GMP environment.
Physical Requirements
While performing the duties of this position, the employee is regularly required to use hands to finger, handle, or feel and talk or hear.
The employee is frequently required to stand; walk and reach with hands and arms.
The employee is occasionally required to sit; stoop, kneel, crouch, or crawl.
The employee must regularly lift and /or move up to 10-25 pounds; frequently lift and/or move up to 50 pounds.
Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and ability to adjust focus.
Benefits and Compensation
The pay range for applicants in this position generally ranges between $65,000 and $75,000.
The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law.
In addition to career advancement and growth, continuous training, and mentoring opportunities, Stonhard offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Fort Wayne, Indiana
Posted: 2026-09-10 15:11:58
-
JOB DESCRIPTION
Position Summary: This position is responsible for developing, instituting, and overseeing all aspects of Environmental, Health, Safety and Corporate Compliance.
This includes but is not limited to ensuring the company complies with all federal and state health, safety and environmental laws, regulations and reporting standards.
Essential Functions:
Works with all personnel at the facility to make sure all safety and environmental regulations are met and are being followed;
Primarily responsible for both the overview of compliance as well as day-to-day operations with respect to safety and regulatory permits and reports.
Ensure all are met with best practices and are compliant.
This pertains to Federal, State, and Local regulations i.e.
RCRA, EPA reporting requirements both directly to the EPA as well as those governed by Missouri DNR Air Pollution and HAZ WASTE;
Conduct and coordinate on-site daily inspections to audit physical conditions and safe work practices.
Including but not limited to: PPE for specific tasks, Emission Points, Work Permits, General Housekeeping, Spill Kits, Satellite and Pre-Transport Waste Storage Areas, Fire Extinguishers, Shower and Eye Wash, etc.;
Be aware concerning all city, state and federal compliance regulations;
Conduct and improve training programs related to all aspects of safety and compliance in the facility for all personnel.
This includes but not limited to: new employee training and refreshers, forklift safety, OSHA, hazwoper, contractor orientation, FOT/IATA, etc.
All training should be conducted in a timely manner and ensure additional process specific trainings are sufficient to maintain safety for employees.
Maintain and update all plans required at the facility, including but not limited to: General Operating Permit, Hazardous Waste Generator Compliance, Storm water Pollution Prevention Plan, Spill Prevention Control and Countermeasures, Emergency Response Plan, Compressed Gas Plan, Contingency Plans, Hazard Communication Program and Security Plans;
Essential reports such as TRI, Tier II, RMP, Quarterly and Biennial Waste Reporting (and their due dates) is the responsibility of your department.
Assistance will be given from other staff to prepare and maintain this data;
Participate and help conduct Safety Committee meetings;
Works closely with HR manager and Vice President/CFO to become responsible for the hands-on administration of the workers' compensation program.
Maintain the OSHA 300 log and tracking.
Manage medical monitoring program;
Maintain and improve environmental compliance programs related to hazardous wastes, air permitting, water pollution control, and community right-to-know programs;
Select and maintain safety equipment and safety supplies on site.
To include purchasing and keeping track of the supplies and managing the costs of these supplies;
Reduce waste generation and costs of disposal.
Upgrade monitoring, testing and instrumentation of waste and byproducts.
Schedule and maintain all documentation related to all waste pickups, including certifying and recertifying waste profiles;
Improve overall safety, housekeeping and reliability of plant work areas and compliance systems;
Member of the PSM team;
Implement and coordinate the documentation and schedule for preventative maintenance of equipment through the Faciliworks program.
Maintain, create and close work orders.
Keep Asset List up to date within Faciliworks database.
Train all maintenance personnel on these procedures and manage to ensure proper procedures are followed;
Ensure all permits (LOTO, Hot Work, Confined Space Entry), as well as MOC's are done correctly, and properly filed and archived.
Become proficient in generating, reviewing and updating SDS's and Labels for our product line.
This will be a multi-member team as GHS is being implemented in 2015, however, in 2016 and future years' maintenance of this system will become part of your department;
Supervise, coach, motivate and develop staff.
Minimum Requirements:
Bachelor's degree in environmental management, Chemistry, Engineering, or a related discipline, or high school diploma if degree with 5 years or more of direct experience in Process Safety Management, or suitable combination of education and relevant experience as described;
Specialized technical/aptitude experience: minimum of 3 years' experience in a manufacturing environment and demonstrated proficiency with manufacturing processes.
Previous work and/or substantial knowledge of, including commonly used concepts, practices and procedures, within the thermoset polymer industry is a strongly considered asset;
Demonstrated comprehensive knowledge of office and facilities coordination and basic leadership and management knowledge; (if applicable to position)
Demonstrated organization, facilitation, communication and presentation skills; (if applicable to position)
Ability to prioritize workflow and organize diverse material and ability to handle multiple, competing and changing priorities; ability to perform effectively without supervision and within established time limits and ongoing deadlines;
Ability to interact and communicate effectively and professionally verbally and in writing, and to provide exceptional service internally and externally;
Relevant computer skills for this position include knowledge and experience with Microsoft Office applications (Word, Excel, PowerPoint) and web-based applications.
Experience using SAGE Platinum for Windows preferred.
Displays adaptability in learning the use of relevant software and displays comprehension of fundamental computer practices and database management;
Demonstrated ability to serve as a knowledgeable resource to the organization's management team that provides leadership and direction;
Demonstrated leadership and vision managing staff groups and major projects or initiatives;
Outstanding interpersonal relationship building and employee coaching and development skills.
Benefits and Compensation
The pay range for applicants in this position generally ranges between $120,000.00/year and $140,000/year.
The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law.
In addition to career advancement and growth, continuous training, and mentoring opportunities, Arnette Polymers offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans.
Arnette Polymers is a division of The Stonhard Group, an RPM International company (NYSE: RPM) that is headquartered in Maple Shade, NJ and has more than 100 years of experience manufacturing and installing high performance, seamless floors throughout the world.
We manufacture and install long-term floor, wall and lining solutions to markets including, but not limited to: food & beverage, general manufacturing, pharmaceutical, chemical processing, education, healthcare, government, technology and hospitality.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
Pay: $120,000.00 - $140,00.00 per yearApply for this ad Online! ....Read more...
Type: Permanent Location: Richmond, Missouri
Posted: 2026-09-10 15:11:22
-
JOB DESCRIPTION
The Process Engineer is responsible for evaluating and improving processes within Stonhard manufacturing operations.
Additionally, the Process Engineer is responsible for implementation of continuous improvement initiatives, capital project support, production efficiency, maintenance process improvements, and equipment reliability.
Essential Functions
Lead root cause analysis for process failures.
Develop and maintain standard work instructions.
Develop and maintain Process Failure Mode Effect Analysis for areas of responsibility.
Improves production line efficiency to show a measurable increase in OEE.
Support maintenance in equipment troubleshooting.
Working knowledge of I/O, PLC, and 24V controls is preferred.
Programming a plus.
Experience with Manufacturing Execution Systems preferred.
Design and coordinate fabrication of manufacturing support components.
Support day-to-day production operations.
Re-engineer existing equipment to meet new optimization, reliability, safety, throughput, and process requirements.
Evaluate and make recommendations, which will increase output and decrease costs by addressing/improving workflow, ergonomics, time/motion characteristics, cycle-times, set-up times, waste, etc.
Confer with management and general staff to implement plans and recommendations.
Ensure CI project goals are met and sustained through the development of effective control plans.
Ensure Continuous Improvement processes and procedures are followed and adhered to through auditing and process confirmation practices.
Lead C.I.
initiatives in areas of 5S, Waste Reduction, Value-Stream Mapping, etc.
Ensure appropriate validations are completed as part of solution implementation.
Downtime Loss Analysis and Reduction - Start-up & Changeovers downtime improvement
Equipment failure (Structured failure analysis 5W's, Fishbone analysis)
Minimum Requirements
Bachelor's degree in engineering
Lean and/or Six Sigma preferred but not required.
Minimum 5 years of manufacturing experience preferably in a GMP environment.
Physical Requirements
While performing the duties of this position, the employee is regularly required to use hands to finger, handle, or feel and talk or hear.
The employee is frequently required to stand; walk and reach with hands and arms.
The employee is occasionally required to sit; stoop, kneel, crouch, or crawl.
The employee must regularly lift and /or move up to 10-25 pounds; frequently lift and/or move up to 50 pounds.
Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and ability to adjust focus.
Benefits and Compensation
The pay range for applicants in this position generally ranges between $65,000 and $75,000.
The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law.
In addition to career advancement and growth, continuous training, and mentoring opportunities, Stonhard offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Fort Wayne, Indiana
Posted: 2026-09-10 07:12:52
-
Role: Engineering Manager
Salary: £65,000 - £75,000 DOE + Bonus (potentially higher for the right candidate)
Hours: Mon-Fri, core hours 08:30 - 17:00 (must be flexible depending on business needs)
Location: Marden, Kent
Contract: Full-time, Permanent
KHR is working with a growing and well-established engineering and manufacturing business to recruit an experienced technical Engineering Manager to lead a multidisciplinary engineering function.
The role will focus on leading and developing the engineering team, overseeing NPI/NPD projects from concept through to design and manufacturing, while also improving engineering processes.
The successful candidate will be hands-on, commercially minded and comfortable working across multiple areas of the business.
Key Responsibilities
- Lead and develop multidisciplinary teams across different areas of engineering.
- Manage recruitment, appraisals, performance, coaching and ongoing development of engineers.
- Oversee NPI/NPD from concept/design through to manufacturing.
- Manage multidisciplinary engineering projects, ensuring technical, quality, cost and delivery requirements are met.
- Improve engineering processes, governance, documentation and ways of working.
- Work closely with Manufacturing and Production to support successful product development and industrialisation.
- Provide hands-on technical leadership, problem-solving and engineering decision-making.
- Support engineering strategy, innovation, resource planning and continuous improvement.
- Oversee engineering resources and priorities, ensuring teams are effectively allocated across multiple projects and business requirements.
- Identify and manage technical risks, supporting design reviews, technical trade-offs and ensuring engineering solutions meet standards.
- Develop engineering capability and best practice, introducing structured design methodologies, configuration control and lessons learned to improve product quality and reliability.
What We're Looking For
- Strong Engineering Management level experience.
- Strong NPI/NPD and product life cycle experience.
- Proven leadership of multidisciplinary engineering teams, across multiple areas of engineering/manufacturing
- Genuine people management experience, including recruitment, performance management and development.
- Experience working closely with manufacturing and production.
- Ideally from electronics, medical, defence, software, scientific or another complex engineering environment.
- A hands-on and technically engaged leadership style rather than purely strategic experience.
- Degree qualified in Engineering, Physics or a related discipline.
What's On Offer
- £65,000 - £75,000 salary, potentially higher DOE
- Bonus scheme
- Enhanced pension contributions
- Training and development
- Occasional international travel
- Other general benefits
At KHR, we take care to ensure that you are represented as well as possible, so it is worth checking your CV for layout, spelling and grammar as well as making sure it is up to date before you submit.
If you feel you need to highlight particular qualifications, skills or relevant experience with regard to a specific role, then please add a cover letter or a preface page.
This does not need to be formatted in the same manner.
In addition, if your CV is heavy with graphics, etc, please could you also submit a "clean" copy in Word.
Thank you.
Knowledge House Resourcing Ltd is acting as an Employment Agency in relation to this vacancy.
KHR - Recruitment Specialists is a trading name of Knowledge House Resourcing Ltd.
Keep in touch with us online for job alerts, industry updates and market...
....Read more...
Type: Permanent Location: Marden, England
Start: 28/09/2026
Salary / Rate: £65000 - £75000 per annum + + Bonus + Benefits
Posted: 2026-09-09 17:17:03
-
JOB DESCRIPTION
Company Overview
RPM Performance Coatings is a strategic operating unit of RPM International Inc.
RPM Performance Coatings joins exceptional products, technologies, service and individuals together to provide a comprehensive building solution package to markets throughout North America, as well as internationally.
RPM Performance Coatings products and services are sold directly to contractors, distributors and end users, such as industrial manufacturing facilities, public institutions and other commercial customers.
RPM Performance Coatings generated $1.5 billion in net sales for the fiscal year ended May 31, 2024.
The Data Solutions Engineer is responsible for developing, maintaining, and enhancing enterprise data solutions that support reporting, analytics, and business operations.
This role focuses on building and supporting data pipelines, transforming and integrating data within Databricks, and creating trusted, business-ready datasets for consumption across the organization.
A key responsibility is preparing and validating data from Microsoft Dynamics 365 Finance & Supply Chain Management (D365 F&SCM), Infor LN, and other enterprise systems.
The role collaborates closely with Data Engineering, Business Intelligence, and business stakeholders to deliver reliable and scalable data solutions on Microsoft Azure and related enterprise platform
Essential Functions
Data Pipeline Development
Design, build, and maintain data pipelines for ingestion, transformation, and delivery.
Automate workflows to ensure efficiency and reliability.
Data Transformation & Integration
Develop and enhance Bronze, Silver, and Gold layer datasets to support business and analytical requirements.
Integrate data from ERP and other enterprise systems into enterprise data platforms.
Create and maintain data transformations, joins, calculations, and business logic to support downstream consumption.
Support deployment of new data assets, enhancements, and data products.
Data Validation & Quality
Validate, reconcile, and troubleshoot data to ensure accuracy, completeness, and consistency.
Investigate data quality issues and collaborate with business stakeholders to identify and resolve discrepancies.
Support data governance standards through adherence to established data quality, security, and documentation practices.
Data Modeling
Create and maintain logical and physical data models.
Ensure compliance with data quality, security, and governance standards.
Collaboration
Work closely with BI teams, data analysts, and business stakeholders to deliver actionable insights.
Continuous Improvement
Stay current on emerging technologies and best practices in data engineering and architecture.
Other duties that may be assigned.
Minimum Requirements
Bachelor's degree in Computer Science, Information Systems, Data Engineering, Data Analytics, or a related field.
3-5+ years of experience developing and supporting data solutions, data integration processes, or data engineering initiatives.
Proficiency in SQL and modern data management concepts.
Strong knowledge of data modeling, ETL/ELT processes, and database management principles.
Experience integrating and validating data from enterprise business applications, including ERP systems.
Strong analytical and problem-solving skills with the ability to troubleshoot data quality and integration issues.
Understanding of data governance, security, and data quality best practices.
Experience working with Business Intelligence and Analytics teams to deliver trusted, business-ready data.
Applicants must be authorized to work in the United States.
We are unable to sponsor or take over sponsorship of an employment visa for this position.
Preferred Requirements
Experience with enterprise data strategy and architecture principles.
Advanced skills in SQL, Python, and automation scripting.
Familiarity with modern data architecture patterns, including data lakes, data warehouses, and lakehouse platforms.
Experience with Databricks or comparable cloud-based data engineering platforms.
Experience developing and supporting Bronze, Silver, and Gold data layers or equivalent curated data models.
Experience with Microsoft Dynamics 365 F&SCM, Infor LN, or other ERP platforms.
Experience supporting Power BI, Microsoft Fabric, or other enterprise analytics platforms.
Azure Data Engineering, Databricks, or related cloud data certifications.
Benefits and Compensation
The pay range for applicants in this position generally ranges between $95,000 and $120,000 annually.
The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law.
In addition to career advancement and growth, continuous training, and mentoring opportunities, Stonhard offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Maple Shade, New Jersey
Posted: 2026-09-09 15:13:06
-
JOB DESCRIPTION
BUILD YOUR FUTURE WHILE YOU HELP BUILD A BETTER WORLD!
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Technical Specialist (Sr) maintains core product line building code compliance, ensures new products and systems are code compliant, participates in internal product and system development teams, answers project specific questions, reviews project drawings to make recommendations, works with third party testing facilities and is heavily involved in industry organizations that help shape industry standards.
This position has a significant focus on supporting Dryvit EIFS products and systems in Canada.
ESSENTIAL DUTIES & RESPONSIBILITIES:
Recommend and approve Product Line application policies within technical literature.
Answers project-specific questions.
Review project drawings and make recommendations.
Coordinate 3rd party testing certification/approvals.
Recommend project or product specific testing, interpret results, and make recommendations based on finding.
High level of understanding of testing methods/techniques for Laboratory/Field Testing.
Present a comprehensive understanding of testing methods to confirm varying compatibility among materials.
Develop and review of product literature, application instruction, and the maintenance and updating of field training manuals.
Comprehensive understanding of applicable Building Code requirements related to EIFS and other types of façade systems.
Write, review, and make recommendations for letters of installation and job parameters along with detailed drawings to help make the sale.
Formally respond to inquiries in written form based on sound engineering judgement.
Provide technical training to internal and external customers focused on façade systems, code requirements, test methods, and application of relevant Tremco systems.
Effectively collaborate with internal and designated external customers.
Assure product performance through reviewing and making recommendations for proper use and field application.
Master assigned core product line technology to include writing policy.
Actively able to train/mentor new employees.
Demonstrate a high level of critical thinking and problem-solving skills.
Demonstrate a high level of understanding of building science principles.
EDUCATION:
Bachelor's degree in science, Civil Engineering, Construction Management or similar field required; High School Diploma or GED and 15+ years related experience required, in lieu of college degree.
EXPERIENCE:
7+ years of Civil Engineering, Architectural, Building Envelope, Building Science, Construction Consulting, Construction industry or similar experience.
Strong consideration will be given to candidates with experience in the field (job-site-related experience).
Expertise with Canadian codes related to EIFS, system fire performance, air/water resistive barrier systems.
Strong background in understanding building science principles and performing related wall assembly analyses for a diversity of wall systems.
CERTIFICATES, LICENSES, REGISTRATIONS:
OHSA 10 Preferred but not required
Engineer-in-Training Certification Preferred but not required
Licensed Engineer or Registered Architect Preferred but not required
OTHER SKILLS AND ABILITIES:
Experience with Auto CAD (preferred) Word, Excel, and Bluebeam.
Experience with hygrothermal modeling software preferred, but not required (WUFI, THERM, etc.)
Ability to manage multiple priorities.
Effective team player.
Self-motivated.
Excellent written and verbal communication skills.
Ability to travel up to 10% in the North America region.
Mentoring/Training.
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally ranges between $110,854 and $138,570 plus incentive compensation.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to Extended Health and Dental insurance starting day one of employment without paying premiums, Paid Company Holidays, paid time off, Group Retirement Savings Program with a company match, defined Benefit Pension Plan, Performance Based Bonus eligibility, Health & Fitness Subsidy, and access to company Employee Assistance Programs.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Ontario, California
Posted: 2026-09-09 15:12:41
-
JOB DESCRIPTION
BUILD YOUR FUTURE WHILE YOU HELP BUILD A BETTER WORLD!
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Technical Specialist (Sr) maintains core product line building code compliance, ensures new products and systems are code compliant, participates in internal product and system development teams, answers project specific questions, reviews project drawings to make recommendations, works with third party testing facilities and is heavily involved in industry organizations that help shape industry standards.
This position has a significant focus on supporting Dryvit EIFS products and systems in Canada.
ESSENTIAL DUTIES & RESPONSIBILITIES:
Recommend and approve Product Line application policies within technical literature.
Answers project-specific questions.
Review project drawings and make recommendations.
Coordinate 3rd party testing certification/approvals.
Recommend project or product specific testing, interpret results, and make recommendations based on finding.
High level of understanding of testing methods/techniques for Laboratory/Field Testing.
Present a comprehensive understanding of testing methods to confirm varying compatibility among materials.
Develop and review of product literature, application instruction, and the maintenance and updating of field training manuals.
Comprehensive understanding of applicable Building Code requirements related to EIFS and other types of façade systems.
Write, review, and make recommendations for letters of installation and job parameters along with detailed drawings to help make the sale.
Formally respond to inquiries in written form based on sound engineering judgement.
Provide technical training to internal and external customers focused on façade systems, code requirements, test methods, and application of relevant Tremco systems.
Effectively collaborate with internal and designated external customers.
Assure product performance through reviewing and making recommendations for proper use and field application.
Master assigned core product line technology to include writing policy.
Actively able to train/mentor new employees.
Demonstrate a high level of critical thinking and problem-solving skills.
Demonstrate a high level of understanding of building science principles.
EDUCATION:
Bachelor's degree in science, Civil Engineering, Construction Management or similar field required; High School Diploma or GED and 15+ years related experience required, in lieu of college degree.
EXPERIENCE:
7+ years of Civil Engineering, Architectural, Building Envelope, Building Science, Construction Consulting, Construction industry or similar experience.
Strong consideration will be given to candidates with experience in the field (job-site-related experience).
Expertise with Canadian codes related to EIFS, system fire performance, air/water resistive barrier systems.
Strong background in understanding building science principles and performing related wall assembly analyses for a diversity of wall systems.
CERTIFICATES, LICENSES, REGISTRATIONS:
OHSA 10 Preferred but not required
Engineer-in-Training Certification Preferred but not required
Licensed Engineer or Registered Architect Preferred but not required
OTHER SKILLS AND ABILITIES:
Experience with Auto CAD (preferred) Word, Excel, and Bluebeam.
Experience with hygrothermal modeling software preferred, but not required (WUFI, THERM, etc.)
Ability to manage multiple priorities.
Effective team player.
Self-motivated.
Excellent written and verbal communication skills.
Ability to travel up to 10% in the North America region.
Mentoring/Training.
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally ranges between $110,854 and $138,570 plus incentive compensation.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to Extended Health and Dental insurance starting day one of employment without paying premiums, Paid Company Holidays, paid time off, Group Retirement Savings Program with a company match, defined Benefit Pension Plan, Performance Based Bonus eligibility, Health & Fitness Subsidy, and access to company Employee Assistance Programs.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Ontario, California
Posted: 2026-09-09 15:12:13
-
JOB DESCRIPTION
Company Overview
RPM Performance Coatings is a strategic operating unit of RPM International Inc.
RPM Performance Coatings joins exceptional products, technologies, service and individuals together to provide a comprehensive building solution package to markets throughout North America, as well as internationally.
RPM Performance Coatings products and services are sold directly to contractors, distributors and end users, such as industrial manufacturing facilities, public institutions and other commercial customers.
RPM Performance Coatings generated $1.5 billion in net sales for the fiscal year ended May 31, 2024.
The Data Solutions Engineer is responsible for developing, maintaining, and enhancing enterprise data solutions that support reporting, analytics, and business operations.
This role focuses on building and supporting data pipelines, transforming and integrating data within Databricks, and creating trusted, business-ready datasets for consumption across the organization.
A key responsibility is preparing and validating data from Microsoft Dynamics 365 Finance & Supply Chain Management (D365 F&SCM), Infor LN, and other enterprise systems.
The role collaborates closely with Data Engineering, Business Intelligence, and business stakeholders to deliver reliable and scalable data solutions on Microsoft Azure and related enterprise platform
Essential Functions
Data Pipeline Development
Design, build, and maintain data pipelines for ingestion, transformation, and delivery.
Automate workflows to ensure efficiency and reliability.
Data Transformation & Integration
Develop and enhance Bronze, Silver, and Gold layer datasets to support business and analytical requirements.
Integrate data from ERP and other enterprise systems into enterprise data platforms.
Create and maintain data transformations, joins, calculations, and business logic to support downstream consumption.
Support deployment of new data assets, enhancements, and data products.
Data Validation & Quality
Validate, reconcile, and troubleshoot data to ensure accuracy, completeness, and consistency.
Investigate data quality issues and collaborate with business stakeholders to identify and resolve discrepancies.
Support data governance standards through adherence to established data quality, security, and documentation practices.
Data Modeling
Create and maintain logical and physical data models.
Ensure compliance with data quality, security, and governance standards.
Collaboration
Work closely with BI teams, data analysts, and business stakeholders to deliver actionable insights.
Continuous Improvement
Stay current on emerging technologies and best practices in data engineering and architecture.
Other duties that may be assigned.
Minimum Requirements
Bachelor's degree in Computer Science, Information Systems, Data Engineering, Data Analytics, or a related field.
3-5+ years of experience developing and supporting data solutions, data integration processes, or data engineering initiatives.
Proficiency in SQL and modern data management concepts.
Strong knowledge of data modeling, ETL/ELT processes, and database management principles.
Experience integrating and validating data from enterprise business applications, including ERP systems.
Strong analytical and problem-solving skills with the ability to troubleshoot data quality and integration issues.
Understanding of data governance, security, and data quality best practices.
Experience working with Business Intelligence and Analytics teams to deliver trusted, business-ready data.
Applicants must be authorized to work in the United States.
We are unable to sponsor or take over sponsorship of an employment visa for this position.
Preferred Requirements
Experience with enterprise data strategy and architecture principles.
Advanced skills in SQL, Python, and automation scripting.
Familiarity with modern data architecture patterns, including data lakes, data warehouses, and lakehouse platforms.
Experience with Databricks or comparable cloud-based data engineering platforms.
Experience developing and supporting Bronze, Silver, and Gold data layers or equivalent curated data models.
Experience with Microsoft Dynamics 365 F&SCM, Infor LN, or other ERP platforms.
Experience supporting Power BI, Microsoft Fabric, or other enterprise analytics platforms.
Azure Data Engineering, Databricks, or related cloud data certifications.
Benefits and Compensation
The pay range for applicants in this position generally ranges between $95,000 and $120,000 annually.
The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law.
In addition to career advancement and growth, continuous training, and mentoring opportunities, Stonhard offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Maple Shade, New Jersey
Posted: 2026-09-09 15:11:46
-
JOB DESCRIPTION
Company Overview
RPM Performance Coatings is a strategic operating unit of RPM International Inc.
RPM Performance Coatings joins exceptional products, technologies, service and individuals together to provide a comprehensive building solution package to markets throughout North America, as well as internationally.
RPM Performance Coatings products and services are sold directly to contractors, distributors and end users, such as industrial manufacturing facilities, public institutions and other commercial customers.
RPM Performance Coatings generated $1.5 billion in net sales for the fiscal year ended May 31, 2024.
The Data Solutions Engineer is responsible for developing, maintaining, and enhancing enterprise data solutions that support reporting, analytics, and business operations.
This role focuses on building and supporting data pipelines, transforming and integrating data within Databricks, and creating trusted, business-ready datasets for consumption across the organization.
A key responsibility is preparing and validating data from Microsoft Dynamics 365 Finance & Supply Chain Management (D365 F&SCM), Infor LN, and other enterprise systems.
The role collaborates closely with Data Engineering, Business Intelligence, and business stakeholders to deliver reliable and scalable data solutions on Microsoft Azure and related enterprise platform
Essential Functions
Data Pipeline Development
Design, build, and maintain data pipelines for ingestion, transformation, and delivery.
Automate workflows to ensure efficiency and reliability.
Data Transformation & Integration
Develop and enhance Bronze, Silver, and Gold layer datasets to support business and analytical requirements.
Integrate data from ERP and other enterprise systems into enterprise data platforms.
Create and maintain data transformations, joins, calculations, and business logic to support downstream consumption.
Support deployment of new data assets, enhancements, and data products.
Data Validation & Quality
Validate, reconcile, and troubleshoot data to ensure accuracy, completeness, and consistency.
Investigate data quality issues and collaborate with business stakeholders to identify and resolve discrepancies.
Support data governance standards through adherence to established data quality, security, and documentation practices.
Data Modeling
Create and maintain logical and physical data models.
Ensure compliance with data quality, security, and governance standards.
Collaboration
Work closely with BI teams, data analysts, and business stakeholders to deliver actionable insights.
Continuous Improvement
Stay current on emerging technologies and best practices in data engineering and architecture.
Other duties that may be assigned.
Minimum Requirements
Bachelor's degree in Computer Science, Information Systems, Data Engineering, Data Analytics, or a related field.
3-5+ years of experience developing and supporting data solutions, data integration processes, or data engineering initiatives.
Proficiency in SQL and modern data management concepts.
Strong knowledge of data modeling, ETL/ELT processes, and database management principles.
Experience integrating and validating data from enterprise business applications, including ERP systems.
Strong analytical and problem-solving skills with the ability to troubleshoot data quality and integration issues.
Understanding of data governance, security, and data quality best practices.
Experience working with Business Intelligence and Analytics teams to deliver trusted, business-ready data.
Applicants must be authorized to work in the United States.
We are unable to sponsor or take over sponsorship of an employment visa for this position.
Preferred Requirements
Experience with enterprise data strategy and architecture principles.
Advanced skills in SQL, Python, and automation scripting.
Familiarity with modern data architecture patterns, including data lakes, data warehouses, and lakehouse platforms.
Experience with Databricks or comparable cloud-based data engineering platforms.
Experience developing and supporting Bronze, Silver, and Gold data layers or equivalent curated data models.
Experience with Microsoft Dynamics 365 F&SCM, Infor LN, or other ERP platforms.
Experience supporting Power BI, Microsoft Fabric, or other enterprise analytics platforms.
Azure Data Engineering, Databricks, or related cloud data certifications.
Benefits and Compensation
The pay range for applicants in this position generally ranges between $95,000 and $120,000 annually.
The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law.
In addition to career advancement and growth, continuous training, and mentoring opportunities, Stonhard offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Maple Shade, New Jersey
Posted: 2026-09-09 15:11:31
-
JOB DESCRIPTION
BUILD YOUR FUTURE WHILE YOU HELP BUILD A BETTER WORLD!
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Technical Specialist (Sr) maintains core product line building code compliance, ensures new products and systems are code compliant, participates in internal product and system development teams, answers project specific questions, reviews project drawings to make recommendations, works with third party testing facilities and is heavily involved in industry organizations that help shape industry standards.
This position has a significant focus on supporting Dryvit EIFS products and systems in Canada.
ESSENTIAL DUTIES & RESPONSIBILITIES:
Recommend and approve Product Line application policies within technical literature.
Answers project-specific questions.
Review project drawings and make recommendations.
Coordinate 3rd party testing certification/approvals.
Recommend project or product specific testing, interpret results, and make recommendations based on finding.
High level of understanding of testing methods/techniques for Laboratory/Field Testing.
Present a comprehensive understanding of testing methods to confirm varying compatibility among materials.
Develop and review of product literature, application instruction, and the maintenance and updating of field training manuals.
Comprehensive understanding of applicable Building Code requirements related to EIFS and other types of façade systems.
Write, review, and make recommendations for letters of installation and job parameters along with detailed drawings to help make the sale.
Formally respond to inquiries in written form based on sound engineering judgement.
Provide technical training to internal and external customers focused on façade systems, code requirements, test methods, and application of relevant Tremco systems.
Effectively collaborate with internal and designated external customers.
Assure product performance through reviewing and making recommendations for proper use and field application.
Master assigned core product line technology to include writing policy.
Actively able to train/mentor new employees.
Demonstrate a high level of critical thinking and problem-solving skills.
Demonstrate a high level of understanding of building science principles.
EDUCATION:
Bachelor's degree in science, Civil Engineering, Construction Management or similar field required; High School Diploma or GED and 15+ years related experience required, in lieu of college degree.
EXPERIENCE:
7+ years of Civil Engineering, Architectural, Building Envelope, Building Science, Construction Consulting, Construction industry or similar experience.
Strong consideration will be given to candidates with experience in the field (job-site-related experience).
Expertise with Canadian codes related to EIFS, system fire performance, air/water resistive barrier systems.
Strong background in understanding building science principles and performing related wall assembly analyses for a diversity of wall systems.
CERTIFICATES, LICENSES, REGISTRATIONS:
OHSA 10 Preferred but not required
Engineer-in-Training Certification Preferred but not required
Licensed Engineer or Registered Architect Preferred but not required
OTHER SKILLS AND ABILITIES:
Experience with Auto CAD (preferred) Word, Excel, and Bluebeam.
Experience with hygrothermal modeling software preferred, but not required (WUFI, THERM, etc.)
Ability to manage multiple priorities.
Effective team player.
Self-motivated.
Excellent written and verbal communication skills.
Ability to travel up to 10% in the North America region.
Mentoring/Training.
BENEFITS AND COMPENSATION:
The salary range for applicants in this position generally ranges between $110,854 and $138,570 plus incentive compensation.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to Extended Health and Dental insurance starting day one of employment without paying premiums, Paid Company Holidays, paid time off, Group Retirement Savings Program with a company match, defined Benefit Pension Plan, Performance Based Bonus eligibility, Health & Fitness Subsidy, and access to company Employee Assistance Programs.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Ontario, California
Posted: 2026-09-09 15:11:23
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Mechanical Engineer provides engineering support to the assigned program and/or area to ensure the product is processed in accordance with customer and division quality requirements while maintaining production flow.
Charged with developing and maintaining systems to ensure that all products manufactured by the plant meet customer specifications and achieve superior and reliability levels.
Responsible for investigating and implementing new process technology at the plant.
The Mechanical Engineer is responsible for maintaining, upgrading, and optimizing the plant.
This position is responsible for influencing the development of preventative maintenance programs at the facility and will have a significant role in capital improvement plans while assisting in work area design, plant layout, visual control and metric implementation, material flow, process tracking, and communication.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Analyze statistical data and product specifications to determine standards and establish quality and reliability objectives of the finished product.
Participate in plant metric reporting.
Coordinate quality control objectives and activities as detailed in the facility site plan to resolve any production problems that may occur, maximize product consistency, and minimize cost.
Prepare estimates of production costs and production progress reports for management.
Design measurement and control systems for chemical plants based on data collected in laboratory experiments and in pilot plant operations.
Use SAP to monitor production/business functions.
Provides engineering expertise for all operations in the plant.
Must be the subject matter expert regarding all manufacturing equipment and processes at the plant.
Recommend modifications to current processes and equipment; document and follow up with process engineers responsible for the modifications.
Works with the plant engineers and maintenance to influence the direction of preventative maintenance best practices.
Support a high-performance results-oriented culture and maintain high standards of safety and compliance.
Provide technical and operational leadership for equipment and facility maintenance and improvements.
Deliver disciplined project management and product development assistance.
Regular review of batch first pass yield, production quality, distressed, obsolete, scrap, and returned material.
Troubleshoot and implement repeatability best practices.
Assist in the identification of capital requirements for the facilities' annual capital plans and budgets.
Lead investigations into equipment failures, difficulties, and deficiencies.
Interface with leadership, operators, and maintenance to ensure continuous improvement and continuous production.
Develop and streamline their critical metrics and assist when necessary.
Assist in the development of site metrics and KPI's Implementation and continued support of PIE.
Perform a job in accordance with all Tremco safety policies and procedures.
Perform other duties, as assigned.
EDUCATION REQUIREMENTS:
Bachelor's degree (B.
S.) in mechanical or electrical engineering.
EDUCATION REQUIREMENTS:
6+ Years' experience performing Engineering duties/responsibilities in a Manufacturing Environment preferred.
Continuous web process and batch process equipment experience preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Create standard work instructions/SOPs.
Demonstrate knowledge of arithmetic, statistics, continuous improvement concepts, ISO procedures, and their applications.
Apply Excel, Word, and SAP applications to daily job responsibilities.
Become knowledgeable of safety, environmental, ISO, and workplace regulations in the plant.
Manage multiple priorities and make decisions on the most critical to keep the project moving forward.
Communicate technical concepts proficiently both verbally and in written form related to product usage, competitive product analysis, product specifications, product repairs, and problems, etc.
Possess strong problem-solving skills and employ a solutions-oriented approach.
Bring a self-motivated and team player mindset.
Exhibit strong organizational skills.
Work in a manufacturing environment.
Exemplify team leadership skills.
Build relationships with all levels of the plant.
BENEFITS:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2026-09-08 15:11:30
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Mechanical Engineer provides engineering support to the assigned program and/or area to ensure the product is processed in accordance with customer and division quality requirements while maintaining production flow.
Charged with developing and maintaining systems to ensure that all products manufactured by the plant meet customer specifications and achieve superior and reliability levels.
Responsible for investigating and implementing new process technology at the plant.
The Mechanical Engineer is responsible for maintaining, upgrading, and optimizing the plant.
This position is responsible for influencing the development of preventative maintenance programs at the facility and will have a significant role in capital improvement plans while assisting in work area design, plant layout, visual control and metric implementation, material flow, process tracking, and communication.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Analyze statistical data and product specifications to determine standards and establish quality and reliability objectives of the finished product.
Participate in plant metric reporting.
Coordinate quality control objectives and activities as detailed in the facility site plan to resolve any production problems that may occur, maximize product consistency, and minimize cost.
Prepare estimates of production costs and production progress reports for management.
Design measurement and control systems for chemical plants based on data collected in laboratory experiments and in pilot plant operations.
Use SAP to monitor production/business functions.
Provides engineering expertise for all operations in the plant.
Must be the subject matter expert regarding all manufacturing equipment and processes at the plant.
Recommend modifications to current processes and equipment; document and follow up with process engineers responsible for the modifications.
Works with the plant engineers and maintenance to influence the direction of preventative maintenance best practices.
Support a high-performance results-oriented culture and maintain high standards of safety and compliance.
Provide technical and operational leadership for equipment and facility maintenance and improvements.
Deliver disciplined project management and product development assistance.
Regular review of batch first pass yield, production quality, distressed, obsolete, scrap, and returned material.
Troubleshoot and implement repeatability best practices.
Assist in the identification of capital requirements for the facilities' annual capital plans and budgets.
Lead investigations into equipment failures, difficulties, and deficiencies.
Interface with leadership, operators, and maintenance to ensure continuous improvement and continuous production.
Develop and streamline their critical metrics and assist when necessary.
Assist in the development of site metrics and KPI's Implementation and continued support of PIE.
Perform a job in accordance with all Tremco safety policies and procedures.
Perform other duties, as assigned.
EDUCATION REQUIREMENTS:
Bachelor's degree (B.
S.) in mechanical or electrical engineering.
EDUCATION REQUIREMENTS:
6+ Years' experience performing Engineering duties/responsibilities in a Manufacturing Environment preferred.
Continuous web process and batch process equipment experience preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Create standard work instructions/SOPs.
Demonstrate knowledge of arithmetic, statistics, continuous improvement concepts, ISO procedures, and their applications.
Apply Excel, Word, and SAP applications to daily job responsibilities.
Become knowledgeable of safety, environmental, ISO, and workplace regulations in the plant.
Manage multiple priorities and make decisions on the most critical to keep the project moving forward.
Communicate technical concepts proficiently both verbally and in written form related to product usage, competitive product analysis, product specifications, product repairs, and problems, etc.
Possess strong problem-solving skills and employ a solutions-oriented approach.
Bring a self-motivated and team player mindset.
Exhibit strong organizational skills.
Work in a manufacturing environment.
Exemplify team leadership skills.
Build relationships with all levels of the plant.
BENEFITS:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2026-09-08 07:11:59
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Junior Mechanical Engineer provides engineering support to the program and/or area to ensure the product is processed in accordance with customer and division quality requirements while maintaining production flow.
Charged with assisting with the development and maintenance of systems to ensure that all products manufactured by the plant meet customer specifications and achieve superior reliability levels.
Responsible for investigating and implementing new process technology at the plant.
The Junior Mechanical Engineer is responsible for maintaining, upgrading, and optimizing the plant.
This position is responsible for influencing the development of preventative maintenance programs at the facility, assisting in work area design, plant layout, visual control, metric implementation, material flow, process tracking, and communication.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Analyze statistical data and product specifications to determine standards and establish quality and reliability objectives of the finished product.
Participate in plant metric reporting.
Coordinate quality control objectives and activities as detailed in the facility site plan to resolve any production problems that may occur, maximize product consistency, and minimize cost.
Design measurement and control systems for chemical plants based on data collected in laboratory experiments and in pilot plant operations.
Use SAP to monitor production/business functions.
Provides engineering support for all operations in the plant.
Recommend modifications to current processes and equipment; document and follow up with engineers responsible for the modifications.
Works with the plant engineers, maintenance, and facilities to influence the direction of preventative maintenance best practices.
Support a high-performance results-oriented culture and maintain high standards of safety and compliance.
Provide technical and operational leadership for equipment and facility maintenance and improvements.
Deliver disciplined project management and product development assistance.
Regular review of batch first pass yield, production quality, distressed, obsolete, scrap, and returned material.
Troubleshoot and implement repeatability best practices.
Support investigations on equipment failures, difficulties, and deficiencies.
Interface with leadership, operators, and maintenance to ensure continuous improvement and continuous production.
Assist in the Collection of site metrics and KPI's Implementation and continued support of PIE.
Perform a job in accordance with all Tremco safety policies and procedures.
Perform other duties, as assigned.
EDUCATION & EXPERIENCE REQUIREMENT:
Bachelor's degree (B.
S.) in mechanical or electrical engineering preferred.
Previous experience in a manufacturing environment preferred.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
Compensation will be commensurate with the applicant's relevant experience.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2026-09-07 23:11:45
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Junior Mechanical Engineer provides engineering support to the program and/or area to ensure the product is processed in accordance with customer and division quality requirements while maintaining production flow.
Charged with assisting with the development and maintenance of systems to ensure that all products manufactured by the plant meet customer specifications and achieve superior reliability levels.
Responsible for investigating and implementing new process technology at the plant.
The Junior Mechanical Engineer is responsible for maintaining, upgrading, and optimizing the plant.
This position is responsible for influencing the development of preventative maintenance programs at the facility, assisting in work area design, plant layout, visual control, metric implementation, material flow, process tracking, and communication.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Analyze statistical data and product specifications to determine standards and establish quality and reliability objectives of the finished product.
Participate in plant metric reporting.
Coordinate quality control objectives and activities as detailed in the facility site plan to resolve any production problems that may occur, maximize product consistency, and minimize cost.
Design measurement and control systems for chemical plants based on data collected in laboratory experiments and in pilot plant operations.
Use SAP to monitor production/business functions.
Provides engineering support for all operations in the plant.
Recommend modifications to current processes and equipment; document and follow up with engineers responsible for the modifications.
Works with the plant engineers, maintenance, and facilities to influence the direction of preventative maintenance best practices.
Support a high-performance results-oriented culture and maintain high standards of safety and compliance.
Provide technical and operational leadership for equipment and facility maintenance and improvements.
Deliver disciplined project management and product development assistance.
Regular review of batch first pass yield, production quality, distressed, obsolete, scrap, and returned material.
Troubleshoot and implement repeatability best practices.
Support investigations on equipment failures, difficulties, and deficiencies.
Interface with leadership, operators, and maintenance to ensure continuous improvement and continuous production.
Assist in the Collection of site metrics and KPI's Implementation and continued support of PIE.
Perform a job in accordance with all Tremco safety policies and procedures.
Perform other duties, as assigned.
EDUCATION & EXPERIENCE REQUIREMENT:
Bachelor's degree (B.
S.) in mechanical or electrical engineering preferred.
Previous experience in a manufacturing environment preferred.
BENEFITS AND COMPENSATION:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
Compensation will be commensurate with the applicant's relevant experience.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2026-09-07 23:11:21
-
JOB DESCRIPTION
Company Information
RPM Industrial Coatings Group is home to 11 industry-leading coatings and finishing brands.
Our dynamic portfolio includes liquid coatings, powder coatings, touch-up and repair products, sundries, adjuvants, and much more.
You'll find our products around the globe in industries from architecture and automotive to farming, forestry, marine, and more.
RPM Industrial Coatings Group is part of RPM International Inc., a $7.9 billion global company with subsidiaries that are market and industry leaders in specialty coatings, sealants, building materials, and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's brands are trusted by consumers and professionals alike to help build a better world.
At TCI, Inc.
we're more than a premier supplier of powder coatings-we're a team of innovators, problem-solvers, and customer champions, serving clients across North America.
As an industry leader, we take pride in our people, products, and unmatched service, and we're looking for talented individuals ready to help us grow even further.
Our commitment to excellence starts with our team.
From Sales to Technical Service, Manufacturing to Customer Service, we offer exciting career opportunities that align with your strengths, ambitions, and goals.
Whether you're looking to kickstart your career or take it to the next level, we provide clear paths to individual growth and overall company success.
Job Description
The Sr.
Field Technical Service Representative serves as the organization's highest-level field technical resource, partnering with customers, sales teams, manufacturing, and product development to optimize coating performance and deliver exceptional customer support.
This role provides expert consultation in industrial liquid and powder coating technologies, leads complex troubleshooting efforts, performs technical audits, delivers customer training, and identifies opportunities to improve process efficiency, quality, and productivity.
The successful candidate combines extensive coatings knowledge with exceptional problem-solving, communication, and relationship-building skills to help customers maximize the performance of their coating operations.
Main Responsibilities
Technical Support & Customer Service
Provide advanced technical support to customers, distributors, prospects, and internal teams regarding liquid and powder coating technologies.
Serve as the primary technical resource for complex application issues, product performance concerns, and process optimization.
Build strong customer relationships by delivering responsive, value-added technical service.
Support sales and marketing initiatives through technical expertise and customer engagement.
Process Optimization & Troubleshooting
Lead investigations into coating defects, equipment performance, and process variability.
Conduct root cause analysis utilizing methodologies including:
FMEA
5 Why Analysis
Fishbone Analysis
Statistical Process Control
Design of Experiments (DOE)
Diagnosing and resolving issues including:
Adhesion failures
Orange peel
Solvent pop
Cratering
Blistering
Cure deficiencies
Film build variation
Corrosion failures
Powder contamination
Reclaim system performance
Coating Systems Expertise
Provide technical expertise across industrial finishing operations including:
Liquid coating systems
Powder coating systems
Pretreatment processes
Surface preparation
Material handling systems
Conveyor systems
Cure technologies
Automated and robotic application systems
Maintain expert knowledge of coating chemistries including solventborne, waterborne, high-solids, epoxy, polyurethane, alkyd, polyester, hybrid, acrylic, and architectural coating systems.
Laboratory Testing & Process Validation
Perform and interpret laboratory and field testing in accordance with ASTM, PCI, AAMA, ISO, and customer specifications.
Utilize testing equipment and methodologies including:
Salt Spray
G85 Cyclic Corrosion
QUV
FTIR
DSC
XRF
MEK Resistance
Gloss Measurement
Color Analysis
Impact Testing
Flexibility Testing
Hardness Testing
Operate Datapaq equipment and analyze thermal profiles to validate curing processes.
Interpret laboratory results and correlate testing data with customer specifications and manufacturing performance.
Auditing, Reporting & Training
Conduct technical audits, certification assessments, and process evaluations.
Develop detailed technical reports documenting observations, findings, corrective actions, and recommendations.
Deliver technical training programs for customers, distributors, sales personnel, and manufacturing teams.
Present technical information clearly to groups of varying technical backgrounds.
Represent the company at customer events, industry meetings, and technical seminars.
Collaboration & Leadership
Partner with Sales, Marketing, R&D, Manufacturing, and Quality teams to support customer success.
Lead technical initiatives that improve customer productivity, product performance, and operational efficiency.
Promote continuous improvement through technical expertise and best-practice sharing.
Key Qualifications
Bachelor's degree in Chemistry, Chemical Engineering, Materials Science, Engineering, or a related technical field, or an equivalent combination of education and relevant industry experience.
Minimum of 8 years of progressive experience in industrial coatings with demonstrated expertise in liquid coating technologies and strong working knowledge of powder coating systems.
Extensive knowledge of industrial finishing processes including pretreatment, application equipment, curing technologies, and process optimization.
Experience in performing technical troubleshooting and root cause analysis in manufacturing environments.
Demonstrated experience conducting laboratory and field evaluations using recognized industry testing standards.
Strong analytical, problem-solving, and decision-making skills.
Excellent written and verbal communication skills with the ability to prepare technical reports and deliver presentations.
Strong organizational skills with the ability to manage multiple projects simultaneously.
Proficiency with Microsoft Office applications.
Valid driver's license with an acceptable driving record.
Valid passport or ability to obtain one.
Willingness to travel extensively, including overnight travel (approximately 50-70%, depending on business needs).
Preferred Qualifications
Experience supporting OEM, agricultural, architectural, transportation, heavy equipment, or general industrial finishing operations.
Knowledge of automated and robotic coating application systems.
Experience with powder coating reclaim systems and process optimization.
Experience conducting applicator certification audits.
Familiarity with ASTM, PCI, AAMA, and ISO testing standards.
Experience using statistical analysis and continuous improvement methodologies such as SPC, DOE, Lean Manufacturing, or Six Sigma.
Experience delivering technical presentations and customer training programs.
Working knowledge of infrared, convection, catalytic, and combination curing technologies.
Experience with laboratory instrumentation including FTIR, DSC, XRF, Datapaq, and color measurement systems.
Demonstrated success building long-term customer partnerships through technical consulting and service excellence.
Apply for this ad Online! ....Read more...
Type: Permanent Location: Little Rock, Arkansas
Posted: 2026-09-07 07:10:39
-
JOB DESCRIPTION
Company Information
RPM Industrial Coatings Group is home to 11 industry-leading coatings and finishing brands.
Our dynamic portfolio includes liquid coatings, powder coatings, touch-up and repair products, sundries, adjuvants, and much more.
You'll find our products around the globe in industries from architecture and automotive to farming, forestry, marine, and more.
RPM Industrial Coatings Group is part of RPM International Inc., a $7.9 billion global company with subsidiaries that are market and industry leaders in specialty coatings, sealants, building materials, and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's brands are trusted by consumers and professionals alike to help build a better world.
At TCI, Inc.
we're more than a premier supplier of powder coatings-we're a team of innovators, problem-solvers, and customer champions, serving clients across North America.
As an industry leader, we take pride in our people, products, and unmatched service, and we're looking for talented individuals ready to help us grow even further.
Our commitment to excellence starts with our team.
From Sales to Technical Service, Manufacturing to Customer Service, we offer exciting career opportunities that align with your strengths, ambitions, and goals.
Whether you're looking to kickstart your career or take it to the next level, we provide clear paths to individual growth and overall company success.
Job Description
The Sr.
Field Technical Service Representative serves as the organization's highest-level field technical resource, partnering with customers, sales teams, manufacturing, and product development to optimize coating performance and deliver exceptional customer support.
This role provides expert consultation in industrial liquid and powder coating technologies, leads complex troubleshooting efforts, performs technical audits, delivers customer training, and identifies opportunities to improve process efficiency, quality, and productivity.
The successful candidate combines extensive coatings knowledge with exceptional problem-solving, communication, and relationship-building skills to help customers maximize the performance of their coating operations.
Main Responsibilities
Technical Support & Customer Service
Provide advanced technical support to customers, distributors, prospects, and internal teams regarding liquid and powder coating technologies.
Serve as the primary technical resource for complex application issues, product performance concerns, and process optimization.
Build strong customer relationships by delivering responsive, value-added technical service.
Support sales and marketing initiatives through technical expertise and customer engagement.
Process Optimization & Troubleshooting
Lead investigations into coating defects, equipment performance, and process variability.
Conduct root cause analysis utilizing methodologies including:
FMEA
5 Why Analysis
Fishbone Analysis
Statistical Process Control
Design of Experiments (DOE)
Diagnosing and resolving issues including:
Adhesion failures
Orange peel
Solvent pop
Cratering
Blistering
Cure deficiencies
Film build variation
Corrosion failures
Powder contamination
Reclaim system performance
Coating Systems Expertise
Provide technical expertise across industrial finishing operations including:
Liquid coating systems
Powder coating systems
Pretreatment processes
Surface preparation
Material handling systems
Conveyor systems
Cure technologies
Automated and robotic application systems
Maintain expert knowledge of coating chemistries including solventborne, waterborne, high-solids, epoxy, polyurethane, alkyd, polyester, hybrid, acrylic, and architectural coating systems.
Laboratory Testing & Process Validation
Perform and interpret laboratory and field testing in accordance with ASTM, PCI, AAMA, ISO, and customer specifications.
Utilize testing equipment and methodologies including:
Salt Spray
G85 Cyclic Corrosion
QUV
FTIR
DSC
XRF
MEK Resistance
Gloss Measurement
Color Analysis
Impact Testing
Flexibility Testing
Hardness Testing
Operate Datapaq equipment and analyze thermal profiles to validate curing processes.
Interpret laboratory results and correlate testing data with customer specifications and manufacturing performance.
Auditing, Reporting & Training
Conduct technical audits, certification assessments, and process evaluations.
Develop detailed technical reports documenting observations, findings, corrective actions, and recommendations.
Deliver technical training programs for customers, distributors, sales personnel, and manufacturing teams.
Present technical information clearly to groups of varying technical backgrounds.
Represent the company at customer events, industry meetings, and technical seminars.
Collaboration & Leadership
Partner with Sales, Marketing, R&D, Manufacturing, and Quality teams to support customer success.
Lead technical initiatives that improve customer productivity, product performance, and operational efficiency.
Promote continuous improvement through technical expertise and best-practice sharing.
Key Qualifications
Bachelor's degree in Chemistry, Chemical Engineering, Materials Science, Engineering, or a related technical field, or an equivalent combination of education and relevant industry experience.
Minimum of 8 years of progressive experience in industrial coatings with demonstrated expertise in liquid coating technologies and strong working knowledge of powder coating systems.
Extensive knowledge of industrial finishing processes including pretreatment, application equipment, curing technologies, and process optimization.
Experience in performing technical troubleshooting and root cause analysis in manufacturing environments.
Demonstrated experience conducting laboratory and field evaluations using recognized industry testing standards.
Strong analytical, problem-solving, and decision-making skills.
Excellent written and verbal communication skills with the ability to prepare technical reports and deliver presentations.
Strong organizational skills with the ability to manage multiple projects simultaneously.
Proficiency with Microsoft Office applications.
Valid driver's license with an acceptable driving record.
Valid passport or ability to obtain one.
Willingness to travel extensively, including overnight travel (approximately 50-70%, depending on business needs).
Preferred Qualifications
Experience supporting OEM, agricultural, architectural, transportation, heavy equipment, or general industrial finishing operations.
Knowledge of automated and robotic coating application systems.
Experience with powder coating reclaim systems and process optimization.
Experience conducting applicator certification audits.
Familiarity with ASTM, PCI, AAMA, and ISO testing standards.
Experience using statistical analysis and continuous improvement methodologies such as SPC, DOE, Lean Manufacturing, or Six Sigma.
Experience delivering technical presentations and customer training programs.
Working knowledge of infrared, convection, catalytic, and combination curing technologies.
Experience with laboratory instrumentation including FTIR, DSC, XRF, Datapaq, and color measurement systems.
Demonstrated success building long-term customer partnerships through technical consulting and service excellence.
Apply for this ad Online! ....Read more...
Type: Permanent Location: Little Rock, Arkansas
Posted: 2026-09-06 23:12:32
-
JOB DESCRIPTION
Company Information
RPM Industrial Coatings Group is home to 11 industry-leading coatings and finishing brands.
Our dynamic portfolio includes liquid coatings, powder coatings, touch-up and repair products, sundries, adjuvants, and much more.
You'll find our products around the globe in industries from architecture and automotive to farming, forestry, marine, and more.
RPM Industrial Coatings Group is part of RPM International Inc., a $7.9 billion global company with subsidiaries that are market and industry leaders in specialty coatings, sealants, building materials, and related services.
From homes and workplaces to infrastructure and precious landmarks, RPM's brands are trusted by consumers and professionals alike to help build a better world.
At TCI, Inc.
we're more than a premier supplier of powder coatings-we're a team of innovators, problem-solvers, and customer champions, serving clients across North America.
As an industry leader, we take pride in our people, products, and unmatched service, and we're looking for talented individuals ready to help us grow even further.
Our commitment to excellence starts with our team.
From Sales to Technical Service, Manufacturing to Customer Service, we offer exciting career opportunities that align with your strengths, ambitions, and goals.
Whether you're looking to kickstart your career or take it to the next level, we provide clear paths to individual growth and overall company success.
Job Description
The Sr.
Field Technical Service Representative serves as the organization's highest-level field technical resource, partnering with customers, sales teams, manufacturing, and product development to optimize coating performance and deliver exceptional customer support.
This role provides expert consultation in industrial liquid and powder coating technologies, leads complex troubleshooting efforts, performs technical audits, delivers customer training, and identifies opportunities to improve process efficiency, quality, and productivity.
The successful candidate combines extensive coatings knowledge with exceptional problem-solving, communication, and relationship-building skills to help customers maximize the performance of their coating operations.
Main Responsibilities
Technical Support & Customer Service
Provide advanced technical support to customers, distributors, prospects, and internal teams regarding liquid and powder coating technologies.
Serve as the primary technical resource for complex application issues, product performance concerns, and process optimization.
Build strong customer relationships by delivering responsive, value-added technical service.
Support sales and marketing initiatives through technical expertise and customer engagement.
Process Optimization & Troubleshooting
Lead investigations into coating defects, equipment performance, and process variability.
Conduct root cause analysis utilizing methodologies including:
FMEA
5 Why Analysis
Fishbone Analysis
Statistical Process Control
Design of Experiments (DOE)
Diagnosing and resolving issues including:
Adhesion failures
Orange peel
Solvent pop
Cratering
Blistering
Cure deficiencies
Film build variation
Corrosion failures
Powder contamination
Reclaim system performance
Coating Systems Expertise
Provide technical expertise across industrial finishing operations including:
Liquid coating systems
Powder coating systems
Pretreatment processes
Surface preparation
Material handling systems
Conveyor systems
Cure technologies
Automated and robotic application systems
Maintain expert knowledge of coating chemistries including solventborne, waterborne, high-solids, epoxy, polyurethane, alkyd, polyester, hybrid, acrylic, and architectural coating systems.
Laboratory Testing & Process Validation
Perform and interpret laboratory and field testing in accordance with ASTM, PCI, AAMA, ISO, and customer specifications.
Utilize testing equipment and methodologies including:
Salt Spray
G85 Cyclic Corrosion
QUV
FTIR
DSC
XRF
MEK Resistance
Gloss Measurement
Color Analysis
Impact Testing
Flexibility Testing
Hardness Testing
Operate Datapaq equipment and analyze thermal profiles to validate curing processes.
Interpret laboratory results and correlate testing data with customer specifications and manufacturing performance.
Auditing, Reporting & Training
Conduct technical audits, certification assessments, and process evaluations.
Develop detailed technical reports documenting observations, findings, corrective actions, and recommendations.
Deliver technical training programs for customers, distributors, sales personnel, and manufacturing teams.
Present technical information clearly to groups of varying technical backgrounds.
Represent the company at customer events, industry meetings, and technical seminars.
Collaboration & Leadership
Partner with Sales, Marketing, R&D, Manufacturing, and Quality teams to support customer success.
Lead technical initiatives that improve customer productivity, product performance, and operational efficiency.
Promote continuous improvement through technical expertise and best-practice sharing.
Key Qualifications
Bachelor's degree in Chemistry, Chemical Engineering, Materials Science, Engineering, or a related technical field, or an equivalent combination of education and relevant industry experience.
Minimum of 8 years of progressive experience in industrial coatings with demonstrated expertise in liquid coating technologies and strong working knowledge of powder coating systems.
Extensive knowledge of industrial finishing processes including pretreatment, application equipment, curing technologies, and process optimization.
Experience in performing technical troubleshooting and root cause analysis in manufacturing environments.
Demonstrated experience conducting laboratory and field evaluations using recognized industry testing standards.
Strong analytical, problem-solving, and decision-making skills.
Excellent written and verbal communication skills with the ability to prepare technical reports and deliver presentations.
Strong organizational skills with the ability to manage multiple projects simultaneously.
Proficiency with Microsoft Office applications.
Valid driver's license with an acceptable driving record.
Valid passport or ability to obtain one.
Willingness to travel extensively, including overnight travel (approximately 50-70%, depending on business needs).
Preferred Qualifications
Experience supporting OEM, agricultural, architectural, transportation, heavy equipment, or general industrial finishing operations.
Knowledge of automated and robotic coating application systems.
Experience with powder coating reclaim systems and process optimization.
Experience conducting applicator certification audits.
Familiarity with ASTM, PCI, AAMA, and ISO testing standards.
Experience using statistical analysis and continuous improvement methodologies such as SPC, DOE, Lean Manufacturing, or Six Sigma.
Experience delivering technical presentations and customer training programs.
Working knowledge of infrared, convection, catalytic, and combination curing technologies.
Experience with laboratory instrumentation including FTIR, DSC, XRF, Datapaq, and color measurement systems.
Demonstrated success building long-term customer partnerships through technical consulting and service excellence.
Apply for this ad Online! ....Read more...
Type: Permanent Location: Little Rock, Arkansas
Posted: 2026-09-06 23:12:01
-
JOB DESCRIPTION
WE WILL TRAIN YOU! NOW HIRING IN MULTIPLE LOCATIONS!
The Commercial Façade Field Technician actively performs and enforces Company safety policy and program to minimize accidents affecting employees, the public, and property.
They will be responsible for attending safety meetings, complying with governmental regulations, reporting, and investigating accidents, and planning site-specific job safety procedures including:
$21-38/hour (not including prevailing wage)
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Attend and understand daily onsite safety brief prior to the start of the WTI project.
Inspect and ensure safety of surroundings, equipment and tools and identify and discuss any safety concerns.
Execution of project tasks with knowledge of expected production rates, ensuring tools and materials are used safely and efficiently to complete the assigned project. Complete the project per the scope or work, design and specification of contract & engineering documents as directed by foreman.
Responsible to aid foreman in tracking and monitoring project inventory. Maintains highest quality on-site customer relations in projecting positive image. Has knowledge/understanding and performs work in compliance with all governmental rules and regulations affecting work sites and employees, i.e.
OSHA, DOT, EEO/Affirmative Action, EPA, etc. Provides management with earliest possible notification of real and potential job problems. Accepts responsibility for the care, custody, and use of company equipment, material, tools, and other assets as assigned by the WTI Commercial Foreman. Understands and executes proper material and equipment usage, maintenance, and storage. Perform any other duty and/or project as required or assigned by the WTI Foreman and/or Commercial Business Manager. Maintains ethical business conduct.
Job Requirements:
Masons & Tuckpointers Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Cold Applied Waterproofing Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $21 and $38.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Ohio
Posted: 2026-09-06 15:11:18
-
JOB DESCRIPTION
WE WILL TRAIN YOU! NOW HIRING IN MULTIPLE LOCATIONS!
The Commercial Façade Field Technician actively performs and enforces Company safety policy and program to minimize accidents affecting employees, the public, and property.
They will be responsible for attending safety meetings, complying with governmental regulations, reporting, and investigating accidents, and planning site-specific job safety procedures including:
$21-38/hour (not including prevailing wage)
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Attend and understand daily onsite safety brief prior to the start of the WTI project.
Inspect and ensure safety of surroundings, equipment and tools and identify and discuss any safety concerns.
Execution of project tasks with knowledge of expected production rates, ensuring tools and materials are used safely and efficiently to complete the assigned project. Complete the project per the scope or work, design and specification of contract & engineering documents as directed by foreman.
Responsible to aid foreman in tracking and monitoring project inventory. Maintains highest quality on-site customer relations in projecting positive image. Has knowledge/understanding and performs work in compliance with all governmental rules and regulations affecting work sites and employees, i.e.
OSHA, DOT, EEO/Affirmative Action, EPA, etc. Provides management with earliest possible notification of real and potential job problems. Accepts responsibility for the care, custody, and use of company equipment, material, tools, and other assets as assigned by the WTI Commercial Foreman. Understands and executes proper material and equipment usage, maintenance, and storage. Perform any other duty and/or project as required or assigned by the WTI Foreman and/or Commercial Business Manager. Maintains ethical business conduct.
Job Requirements:
Masons & Tuckpointers Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Cold Applied Waterproofing Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $21 and $38.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2026-09-06 15:11:12
-
Standard Days, Monday to Friday position, early Friday finish and 28 days we are looking for a Coach Builder to join a growing manufacturing business in St Helen's.
This is a fantastic opportunity to work in a clean, modern workshop environment for a company that is excelling in its industry and has a strong order book.
Location of the Coach Builder Position: St Helen's
A growing business that specialises in vehicle conversions, installations, and fleet is looking to recruit a Coach Builder to join the workshop team.
This is a fantastic opportunity for someone with proven mechanical assembly/fitting experience on vehicles, who is looking for a new step in their career and growing into a company that offers support and growth opportunities. Duties of the Coach Builder role:
Running wiring looms through vehicles.
Terminating and connecting cables to electrical systems (lights, beacons, reversing cameras, etc.).
Splicing, trunking, soldering, and general electrical installation.
Fitting sub frames, bodies, and equipment to commercial vehicle chassis.
Reading and interpreting engineering drawings, diagrams, and fitting instructions.
Using hand tools, power tools, and workshop equipment for high-quality installations.
Modifying and drilling chassis rails, brackets, and mounting points where required.
Installing hydraulic and electrical components, ensuring correct alignment.
Carrying out quality checks to ensure work meets company and client standards.
Working as part of a small, supportive team in a busy workshop environment.
Adhering to health & safety policies and maintaining a clean, safe workspace.
Benefits of the Coach Builder role :
Competitive hourly rate (£13.50 - £14 DOE).
Overtime opportunities paid at enhanced rates.
20 days holiday + 8 bank holidays (with 3 days reserved for Christmas shutdown).
Early finish on Fridays.
Ongoing training and development within a supportive team environment
If you are interested in the Coach Builder position, please apply or call Maisie at E3 Recruitment. ....Read more...
Type: Permanent Location: Newton-Le-Willows, England
Start: ASAP
Salary / Rate: £28000.00 - £32000.0 per annum
Posted: 2026-09-06 10:00:11
-
£14.49 starting, moving to £15.53 after training, Standard days - no weekend work, Permanent secure role, OT paid at 150%, On-going training and development to progress career further, Clear progression routes supported by managementA well-recognised engineering business is looking to recruit a Mechanical Fitter as part of its continued growth and future growth plans.
This is a long-term opportunity to join a stable, well-invested engineering company that designs, builds and installs specialist vehicles and equipment systems.
Full training and specialist tools are provided, so this role accepts applicants of all levels of skillset making this ideal for someone with hands-on experience, who is keen to build a career in engineering/manufacturing.The Role You will be trained to assemble and install mechanical, hydraulic and mechanical systems onto vehicles and specialist equipment.
This is not repetitive factory work -it's varied, bespoke, practical engineering in a modern workshop. Your duties will include:
General mechanical build and fitting work
Assembling and fitting hydraulic, and some electrical systems
Installing components onto vehicles and specialist equipment
Reading and working from engineering drawings & schematics
MIG welding (training provided)
Working to high quality and safety standards
Who This Role Suits You don't need formal qualifications — the business is looking for someone with practical mechanical ability and the right attitude.This role would suit someone who has:
Worked on vehicles, plant or machinery
Experience in mechanical fitting, assembly or production in a bespoke environment
Someone with a basic tool kit
A strong interest in engineering or hands-on work
A reliable, hardworking and keen-to-learn approach
What's on Offer
£14.49 - £15.53 per hour starting
Overtime available paid at 150%
Full training & skill development
Permanent position
Clean, well-equipped workshop
Friendly, supportive engineering team
Long-term job security
....Read more...
Type: Permanent Location: Wolverhampton, England
Start: ASAP
Salary / Rate: £30000.00 - £35000.00 per annum
Posted: 2026-09-06 10:00:09
-
£16.50p/h DOE, Mon-Fri Standard Hours, OT paid at 150%, Tools Provided, Production Bonuses, Perm role We are looking for motivated individuals to join our team as a Welder / Fabricator.
This is a permanent, full-time position.
You will be working for a leading UK manufacturing organisation based near Heckmondwike, producing high-quality custom units and cabinets for vehicles What's on offer for the welder / fabricator
Permanent position from day 1
Monday to Friday day shifts, with optional overtime paid at a premium
£15 - £16.50p/h DOE
All tools provided
Key Responsibilities of the Welder / Fabricator
Learn and assist with MIG and TIG welding of aluminium, mild steel, and stainless steel
Fabrication of brackets, racking systems, and other components
Work to engineering drawings under guidance
Use of cutting, folding, and other workshop equipment
General welder / fabricator duties
What We Are Looking For in The Welder / Fabricator
Previous experience as a welder / fabricator
Motivated, reliable, and willing to learn
Good attention to detail and ability to follow instructions
Ability to work safely in a workshop environment
Local to Leeds / Bradford / Huddersfield
If you would like to have a confidential chat about this Welder / Fabricator role, please contact Rodger Morley at E3 Recruitment.
....Read more...
Type: Permanent Location: Liversedge, England
Start: ASAP
Salary / Rate: £30000.00 - £32000.00 per annum
Posted: 2026-09-06 10:00:06
-
JOB DESCRIPTION
WE WILL TRAIN YOU! NOW HIRING IN MULTIPLE LOCATIONS!
The Commercial Façade Field Technician actively performs and enforces Company safety policy and program to minimize accidents affecting employees, the public, and property.
They will be responsible for attending safety meetings, complying with governmental regulations, reporting, and investigating accidents, and planning site-specific job safety procedures including:
$21-38/hour (not including prevailing wage)
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Attend and understand daily onsite safety brief prior to the start of the WTI project.
Inspect and ensure safety of surroundings, equipment and tools and identify and discuss any safety concerns.
Execution of project tasks with knowledge of expected production rates, ensuring tools and materials are used safely and efficiently to complete the assigned project. Complete the project per the scope or work, design and specification of contract & engineering documents as directed by foreman.
Responsible to aid foreman in tracking and monitoring project inventory. Maintains highest quality on-site customer relations in projecting positive image. Has knowledge/understanding and performs work in compliance with all governmental rules and regulations affecting work sites and employees, i.e.
OSHA, DOT, EEO/Affirmative Action, EPA, etc. Provides management with earliest possible notification of real and potential job problems. Accepts responsibility for the care, custody, and use of company equipment, material, tools, and other assets as assigned by the WTI Commercial Foreman. Understands and executes proper material and equipment usage, maintenance, and storage. Perform any other duty and/or project as required or assigned by the WTI Foreman and/or Commercial Business Manager. Maintains ethical business conduct.
Job Requirements:
Masons & Tuckpointers Concrete Restorations, Caulking Waterproofing Parking Garage Restoration Cold Applied Waterproofing Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $21 and $38.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Beachwood, Ohio
Posted: 2026-09-06 07:10:39
-
JOB DESCRIPTION
Tremco Construction Products Group (CPG), part of RPM International Inc., unites industry-leading building envelope solutions manufacturers, service providers and trusted brands-including Tremco, Nudura, Dryvit, Willseal, Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada-to deliver comprehensive, integrated building systems.
With operations spanning North America, Europe, Asia-Pacific, India and Latin America, Tremco CPG has a global presence supported by regional businesses and distributors who understand local market needs for commercial, industrial and residential construction and restoration projects.
GENERAL PURPOSE OF THE JOB:
The Plant Accountant Provides comprehensive financial, cost accounting, and analytical support for the Tremco CPG Mfg.
Corp, Corsicana, TX chemical manufacturing plant.
Partners with the Plant Controller and plant leadership to deliver accurate financial reporting, support operational decision-making, ensure compliance with policies, and drive cost efficiency.
This position will report to the Plant Controller onsite at the plant.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Financial Analysis & Reporting
Track and review all manufacturing spending; propose reclassification entries or accruals as necessary and note anomalies for management.
Perform financial and manufacturing analysis including variance analysis, forecasting, and reporting.
Provide COGS forecasting including standard cost, PPV, and manufacturing variances.
Investigate and explain financial variances.
Prepare plant reports including explanations of variances .
Liaise with internal/external auditors for quarterly and annual audits.
Inventory & Cost Accounting
Manage inventory accuracy, reconciliations, and financial impact analysis.
Perform cost runs and validate product costing working closely with Engineering
Analyze production and purchase price variances.
Month-End Close
Prepare journal entries including accruals and reclassifications.
Reconcile accrual and prepaid accounts.
Support audits.
Ensure confidentiality and integrity of financial data and ensure compliance with GAAP, Tremco CPG Policies and SOX internal controls.
Review Trade and Intercompany Revenue and COGS to ensure accuracy and help ensure Intercompany receivables / payables are in balance.
Budgeting & Planning
Support annual budgeting, forecasting, and planning processes.
Calculate labor and overhead rates.
Business Partnership
Provide financial insights to plant leadership.
Support operational efficiency and cost improvement projects.
Support Corporate requests for data including Government surveys and Tax requests.
EDUCATION REQUIREMENT:
Bachelor's degree in accounting or related field.
EXPERIENCE REQUIREMENT:
Minimum 3 years' experience in commercial construction.
Minimum 3 years' experience in Project Management.
Four to seven years of relevant experience.
SAP Experience primarily in GL, Costing, Procurement and Inventory in a manufacturing environment.
High level analytical and problem-solving skills.
Ability to recognize errors and/or inconsistencies and take action.
CERTIFICATES, LICENSES, REGISTRATIONS:
CPA or CMA preferred.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Strong computer proficiency with Microsoft Office Suite with advanced understanding of Excel.
Work in Plant business office environment with regular visits out into the chemical plant.
Excellent written and verbal communication skills with the ability to speak with all levels.
High degree of flexibility, organizational and time management skills required to effectively handle multiple concurrent projects, a fluctuating workload and rapid changes in priorities.
Ability to work overtime when required for closing activities, budget deadlines or special projects.
Minimal travel is required (< 5%).
TRAVEL REQUIRED:
Minimal travel is required (< 5%).
WORK LOCATION: Corsicana office
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, and lift up to 25 lbs.
BENEFITS AND COMPENSATION:
The salary range for applicants in this position depends on skills and experience.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
You can find more information about the company and plant at our website: TCMC | Tremco CPG Inc.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Corsicana, Texas
Posted: 2026-09-05 23:12:09
