-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: The Production Assembler performs assigned tasks that include, but are not limited to, producing architectural shapes, EIFS wall components, and exterior panel systems.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Follows the daily production schedule set by the Production Supervisor Hand applies adhesive mesh to parts.
Mixes base coats and finishes with electric drill and paddle.
Works as part of a team to run parts through extrusion equipment.
Assembles and pours mold for cast stone.
Trims parts with cutting equipment. Assists in building custom crates based on project specifications.
Prepares and organizes parts for shipment.
Assists with shipping and receiving.
Follows all safety requirements.
Cleans equipment after use and assists team in keeping production space clean and organized.
Assists with monthly inventory counts.
EDUCATION REQUIREMENT: No formal educational requirement.
EXPERIENCE REQUIREMENT: No prior experience or training.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage.
Demonstrates accepted ethical and professional business behavior.
Executes ISO authority and responsibility.
Completes and maintains all required training.
Reports suspected violations including those of a business associate.
Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The hourly rate for applicants in this position generally ranges between $15.85 and $18.98.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: North Kingstown, Rhode Island
Posted: 2025-07-25 15:11:16
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: The Production Assembler performs assigned tasks that include, but are not limited to, producing architectural shapes, EIFS wall components, and exterior panel systems.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Follows the daily production schedule set by the Production Supervisor.
Hand applies adhesive mesh to parts.
Mixes base coats and finishes with electric drill and paddle.
Works as part of a team to run parts through extrusion equipment.
Assembles and pours mold for cast stone.
Trims parts with cutting equipment.
Assists in building custom crates based on project specifications.
Prepares and organizes parts for shipment.
Assists with shipping and receiving.
Follows all safety requirements.
Cleans equipment after use and assists team in keeping production space clean and organized.
Assists with monthly inventory counts.
EDUCATION REQUIREMENT:
No formal educational requirement.
EXPERIENCE REQUIREMENT:
No prior experience or training.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage.
Demonstrates accepted ethical and professional business behavior.
Executes ISO authority and responsibility.
Completes and maintains all required training.
Reports suspected violations including those of a business associate.
Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The hourly rate for applicants in this position generally ranges between $15.85 and $18.98.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law.
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: North Kingstown, Rhode Island
Posted: 2025-07-25 15:11:14
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: The Production Assembler performs assigned tasks that include, but are not limited to, producing architectural shapes, EIFS wall components, and exterior panel systems.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Follows the daily production schedule set by the Production Supervisor Hand applies adhesive mesh to parts. Mixes base coats and finishes with electric drill and paddle. Works as part of a team to run parts through extrusion equipment. Assembles and pours mold for cast stone. Trims parts with cutting equipment Assists in building custom crates based on project specifications. Prepares and organizes parts for shipment. Assists with shipping and receiving. Follows all safety requirements. Cleans equipment after use and assists team in keeping production space clean and organized. Assists with monthly inventory counts.
EDUCATION REQUIREMENT: No formal educational required.
EXPERIENCE REQUIREMENT: No prior experience or training.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage. Demonstrates accepted ethical and professional business behavior. Executes ISO authority and responsibility.
Completes and maintains all required training.
Reports suspected violations including those of a business associate. Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The hourly rate for applicants in this position generally ranges between $17.25 and $19.55.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Carrollton, Texas
Posted: 2025-07-25 15:11:13
-
JOB DESCRIPTION
Ensure EH&S compliance with Federal, state, and local regulations.
Monitor, interpret, and analyze EH&S laws, standards and regulations that impact business operations in Corsicana, Texas.
Assist with the management of site environmental programs including, but not limited to the following:
hazardous and non-hazardous waste management,
SPCC/SWPPP compliance
Air permit compliance
TSCA compliance
Alcohol permit compliance
Product stewardship
Deep well injection.
Compiles, calculates, and manages associated environmental and safety data and statistics and completes necessary and assigned EH&S facility record keeping requirements.
Assists with facilitation of required site, corporate, and government EH&S inspections and reporting.
Identifies and evaluates critical gaps in compliance or findings from incidence reports and collaborates with company executives, site leadership, and insurance risk management services to develop and implement corrective measures.
Provide expertise in the inspection, analysis, audit, and investigation of environmental and safety practices.
Assist with conducting regular safety and environmental system compliance audits and risk assessments.
Participate in the implementation of the site's Process Safety Management and risk management programs:
Audits
Site process development
Process Hazard Analysis (PHA)
Data management and reporting
ADDITIONAL DUTIES AND RESPONSIBILITIES
Assist with the creation of standard operating procedures for manufacturing processes for safety and environmental purposes and conduct training sessions as necessary to educate workers.
Evaluate, develop, and revise site safety management and hazard prevention programs and procedures to ensure a safe workplace for all employees, contractors, and visitors.
Develop, promote, and implement a proactive environmental and safety focused culture throughout the organization.
Assist with the development, promotion, and implementation of proactive plant-specific EH&S committees as necessary.
Drive awareness and accountability for EH&S performance through all levels of the organization
Provide investigation support and ensure root cause and other analysis techniques are harnessed to reduce further incidents.
Sustain productive and collaborative working relationships with all levels of the organization to promote proactive use of the EH&S initiatives.
Assist with the assessment of the organization's business practices.
Plan the long and short-term objectives for compliance, risk management, and development of training and compliance strategies.
EDUCATION & EXPERIENCE
Bachelor's Degree in Engineering, Occupational or Environmental Health and Safety, Environmental Science, or related discipline.
Preferred, 3+ years of on-the-job experience in leading and implementing EH&S programs in a manufacturing environment.
Demonstrated subject-matter expertise and knowledge of health, safety, and environmental regulations.
Prior experience working with local, state, and federal regulatory agencies is preferred.
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.
Ability to write reports, business correspondence, and procedure manuals.
Ability to effectively present information and respond to questions from groups of managers and customers.
ADDITIONAL SKILLS REQUIRED
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
Ability to define problems, collect data, establish facts, and draw valid conclusions.
Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
This position operates both in an office setting and on the Manufacture plant floor located outdoors.
Proficiency with MS Office, particularly Word and Excel; EHS information systems; and agency reporting software.
Ability to anticipate typical problems, identify potential or recurring problems, and take appropriate action proactively.
Ability to think critically, define problems, collect data, establish facts, and draw valid conclusions with a focus on continuous improvement.
Ability to interpret an extensive variety of mechanical instructions and deal with several abstract and concrete variables.
Demonstrated and verifiable ability to work and communicate effectively with all levels of the organization, e.g., from hourly employees to senior management.
Ability to communicate clearly and concisely both verbally and in writing and listen effectively; ability to present information to a diverse audience.
Proven leadership ability to effectively influence and lead others.
Ability to prioritize work, work autonomously and accept constructive feedback.
Ability to travel to other RPM facilities as required.
Wages: From 80K to 100K per year depending on experience and education
This position is bonus eligible
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to: medical, dental, vision, life insurance, disability, vacation, parental leave, 401(k), employee stock purchase plan, and pension, etc..
Apply for this ad Online! ....Read more...
Type: Permanent Location: Corsicana, Texas
Posted: 2025-07-25 15:11:11
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: The Production Operator starts, troubleshoots, and operates manufacturing equipment safely.
There are three Production Operator levels (I, II, & III).
The level will be determined by experience, ability to assume various roles on the plant floor, and demonstrated ability to independently troubleshoot and problem-solve machine issues resulting in efficient cycles and minimal downtime.
The Production Operator will operate production equipment, including industrial blenders, in accordance with the established production schedule.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform work in a safe manner by following all written and verbally communicated safety rules and procedures.
Follow standard work procedures to operate and maintain assigned machine(s).
Routinely meet or exceed production output rates per standards.
Ensure product meets certain tolerances and specifications.
Perform routine inspections per quality standards.
Understand production instructions.
Maintain accurate paperwork.
Inspects equipment, structures, and materials to identify problems or defects prior to production to ensure a clean, clear and safe work environment.
Reads and follows work orders and formulas to meet production specifications and schedules.
Examines materials, ingredients, or product per quality standards.
Weighs or measures materials, ingredients, and products per requirements.
Adds and mixes raw materials according to specifications.
Transfers materials, supplies, and products between work areas.
Discharges blenders of powder when necessary.
Ensures quality and conformity of blended products to meet standards.
Ensures equipment is set-up, cleaned, sanitized, and operating properly before, after and between runs.
Completes cleaning logs and notifies quality control for hygiene testing.
Records operational and production data on specified forms/production documents.
Reports malfunctions to a supervisor and confirms proactive and routine maintenance.
Conducts on-going assessment of quality control and operational procedures.
EDUCATION REQUIREMENT:
No formal education required.
EXPERIENCE REQUIREMENT:
No experience required.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Ability to function effectively in a team setting.
Ability to multi-task while maintaining attention to detail.
Demonstrates reliability, flexibility, and dependability. Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage.
Demonstrates accepted ethical and professional business behavior.
Executes ISO authority and responsibility.
Completes and maintains all required training.
Reports suspected violations including those of a business associate.
Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 75 lbs.
BENEFITS:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2025-07-25 15:11:10
-
JOB DESCRIPTION
DAP has an exciting opportunity for a Maintenance Mechanic at our Baltimore Plant!
Our associates enjoy competitive pay in addition to a comprehensive benefits package that includes: Pension Plan 401k with Company Match Health/Dental/Vision Insurance Paid Parental Leave Stock Purchase Plan ...and much more! In this role, you will be responsible for the repair, maintenance, and enhancement of equipment at the plant. The facility is a 24/7 operation and, while you must be able to work any shift, the opening is currently for the following shift:
4th shift (Friday to Sunday from 5:00 pm to 5:00 am) Overtime is available/required.
Associates earn double-time pay for all hours worked in excess of 50 hours in your standard work week! Responsibilities: Repairing manufacturing, packaging, and material handling equipment Performing various plant maintenance functions to maintain the general operation of the facility Assisting with production duties as needed Requirements: Basic understanding of maintenance processes, industrial safety applications and terminology related to a manufacturing and distribution environment, including but not limited to use of hand and power tools Experience in maintenance crafts and mechanical repair (electrical, plumbing, and welding); electrical troubleshooting, reading and interpreting electrical drawings, blueprints, shop mathematics and drafting skills Ability to lift 50 pounds regularly and ability to stand for periods of up to 3 hours Proven ability to work well with others, self-motivated, work with little or no supervision, multitask and prioritize daily Excellent organizational, interpersonal, decision-making and communication skills
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world. At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Baltimore, Maryland
Posted: 2025-07-25 15:11:06
-
JOB DESCRIPTION
DAP has an exciting opportunity for a Maintenance Mechanic at our Baltimore Plant!
Our associates enjoy competitive pay in addition to a comprehensive benefits package that includes: Pension Plan 401k with Company Match Health/Dental/Vision Insurance Paid Parental Leave Stock Purchase Plan ...and much more! In this role, you will be responsible for the repair, maintenance, and enhancement of equipment at the plant. The facility is a 24/7 operation and, while you must be able to work any shift, the opening is currently for the following shift:
4th shift (Friday to Sunday from 5:00 pm to 5:00 am) Overtime is available/required.
Associates earn double-time pay for all hours worked in excess of 50 hours in your standard work week! Responsibilities: Repairing manufacturing, packaging, and material handling equipment Performing various plant maintenance functions to maintain the general operation of the facility Assisting with production duties as needed Requirements: Basic understanding of maintenance processes, industrial safety applications and terminology related to a manufacturing and distribution environment, including but not limited to use of hand and power tools Experience in maintenance crafts and mechanical repair (electrical, plumbing, and welding); electrical troubleshooting, reading and interpreting electrical drawings, blueprints, shop mathematics and drafting skills Ability to lift 50 pounds regularly and ability to stand for periods of up to 3 hours Proven ability to work well with others, self-motivated, work with little or no supervision, multitask and prioritize daily Excellent organizational, interpersonal, decision-making and communication skills
About DAP
DAP is a market leading manufacturer, innovator and marketer of home repair and construction products including caulks, sealants, spray foam insulation, adhesives, and patch and repair products.
DAP is part of RPM International Inc., a $6.1 billion, multinational company with subsidiaries that are world leaders in specialty coatings, sealants, building materials and related services. You will find DAP products in the hands of professional painters, remodelers, builders, and do-it-yourselfers, and in 60,000 retail outlets, ranging from home centers and mass merchandisers to your local hardware, pro contractor channels and paint stores.
DAP's eight manufacturing and distribution facilities in the United States of America and Canada service North America and the world. At DAP, we hire the best people and give them a collaborative and rewarding work environment that empowers them to succeed! We support associates in continuous professional growth and collaborate on the steps it takes to get to the next level in their careers.
Our associates enjoy a comprehensive benefits package including 401(k) with company match, pension, paid parental leave, competitive health insurance rates, employee stock purchase plan, tuition reimbursement, free wellness programs and more! Learn more about DAP's history, culture and benefits at www.dap.com/careers/
DAP - On the job since 1865.Apply for this ad Online! ....Read more...
Type: Permanent Location: Baltimore, Maryland
Posted: 2025-07-25 15:11:04
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: The Production Assembler performs assigned tasks that include, but are not limited to, producing architectural shapes, EIFS wall components, and exterior panel systems.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Follows the daily production schedule set by the Production Supervisor Hand applies adhesive mesh to parts.
Mixes base coats and finishes with electric drill and paddle.
Works as part of a team to run parts through extrusion equipment.
Assembles and pours mold for cast stone.
Trims parts with cutting equipment. Assists in building custom crates based on project specifications.
Prepares and organizes parts for shipment.
Assists with shipping and receiving.
Follows all safety requirements.
Cleans equipment after use and assists team in keeping production space clean and organized.
Assists with monthly inventory counts.
EDUCATION REQUIREMENT: No formal educational requirement.
EXPERIENCE REQUIREMENT: No prior experience or training.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage.
Demonstrates accepted ethical and professional business behavior.
Executes ISO authority and responsibility.
Completes and maintains all required training.
Reports suspected violations including those of a business associate.
Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The hourly rate for applicants in this position generally ranges between $15.85 and $18.98.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: North Kingstown, Rhode Island
Posted: 2025-07-25 15:11:03
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: The Production Operator starts, troubleshoots, and operates manufacturing equipment safely.
There are three Production Operator levels (I, II, & III).
The level will be determined by experience, ability to assume various roles on the plant floor, and demonstrated ability to independently troubleshoot and problem-solve machine issues resulting in efficient cycles and minimal downtime.
The Production Operator will operate production equipment, including industrial blenders, in accordance with the established production schedule.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Perform work in a safe manner by following all written and verbally communicated safety rules and procedures.
Follow standard work procedures to operate and maintain assigned machine(s).
Routinely meet or exceed production output rates per standards.
Ensure product meets certain tolerances and specifications.
Perform routine inspections per quality standards.
Understand production instructions.
Maintain accurate paperwork.
Inspects equipment, structures, and materials to identify problems or defects prior to production to ensure a clean, clear and safe work environment.
Reads and follows work orders and formulas to meet production specifications and schedules.
Examines materials, ingredients, or product per quality standards.
Weighs or measures materials, ingredients, and products per requirements.
Adds and mixes raw materials according to specifications.
Transfers materials, supplies, and products between work areas.
Discharges blenders of powder when necessary.
Ensures quality and conformity of blended products to meet standards.
Ensures equipment is set-up, cleaned, sanitized, and operating properly before, after and between runs.
Completes cleaning logs and notifies quality control for hygiene testing.
Records operational and production data on specified forms/production documents.
Reports malfunctions to a supervisor and confirms proactive and routine maintenance.
Conducts on-going assessment of quality control and operational procedures.
EDUCATION REQUIREMENT:
No formal education required.
EXPERIENCE REQUIREMENT:
No experience required.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Ability to function effectively in a team setting.
Ability to multi-task while maintaining attention to detail.
Demonstrates reliability, flexibility, and dependability. Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage.
Demonstrates accepted ethical and professional business behavior.
Executes ISO authority and responsibility.
Completes and maintains all required training.
Reports suspected violations including those of a business associate.
Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly.
PHYSICAL DEMANDS:
Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 75 lbs.
BENEFITS:
The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Columbus, Georgia
Posted: 2025-07-25 15:11:02
-
JOB DESCRIPTION
We are seeking experienced Commercial Roofers to join our team.
The skilled Commercial Roofers will be responsible for the maintenance, repairs, and installation of commercial roofing systems.
$20-33/hour (not including prevailing wage)
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to:
401K with company match Company Pension Plan Health Insurance Paid time-off Mileage reimbursement Continuing education Position Duties & Responsibilities:• Installation of different types of roofing systems such as BUR, EPDM, Single-ply, coatings, and other forms of low-slope roofing systems• Safe operation of tools of the trade (hand tools, power tools etc.)• Follow OSHA regulations and other regulatory agencies relating to job site safety, demonstrates safe work practices.• Work outside in a wide variety of weather conditions and to meet the physical demands of the position, including mobility needed to complete tasks.• Climbing and operating on ladders, able to handle at least 50 lbs.• Effective communication with foremen, supervisors, and other WTI and Tremco employees Job Requirements:• Commercial Roofing: All levels; at least 1 year preferred• Reliable form of transportation• Acceptable background check per company standards• Ability to pass a pre-employment drug screen and physical The hourly rate for applicants in this position generally ranges between $20 and $33.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Benefits: Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Harrisburg, Pennsylvania
Posted: 2025-07-25 15:11:02
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: The Production Assembler performs assigned tasks that include, but are not limited to, producing architectural shapes, EIFS wall components, and exterior panel systems.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Follows the daily production schedule set by the Production Supervisor Hand applies adhesive mesh to parts.
Mixes base coats and finishes with electric drill and paddle.
Works as part of a team to run parts through extrusion equipment.
Assembles and pours mold for cast stone.
Trims parts with cutting equipment. Assists in building custom crates based on project specifications.
Prepares and organizes parts for shipment.
Assists with shipping and receiving.
Follows all safety requirements.
Cleans equipment after use and assists team in keeping production space clean and organized.
Assists with monthly inventory counts.
EDUCATION REQUIREMENT: No formal educational requirement.
EXPERIENCE REQUIREMENT: No prior experience or training.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage.
Demonstrates accepted ethical and professional business behavior.
Executes ISO authority and responsibility.
Completes and maintains all required training.
Reports suspected violations including those of a business associate.
Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The hourly rate for applicants in this position generally ranges between $15.85 and $18.98.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: North Kingstown, Rhode Island
Posted: 2025-07-25 15:10:50
-
JOB DESCRIPTION
Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc.
Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America.
GENERAL PURPOSE OF THE JOB: The Production Assembler performs assigned tasks that include, but are not limited to, producing architectural shapes, EIFS wall components, and exterior panel systems.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Follows the daily production schedule set by the Production Supervisor Hand applies adhesive mesh to parts. Mixes base coats and finishes with electric drill and paddle. Works as part of a team to run parts through extrusion equipment. Assembles and pours mold for cast stone. Trims parts with cutting equipment Assists in building custom crates based on project specifications. Prepares and organizes parts for shipment. Assists with shipping and receiving. Follows all safety requirements. Cleans equipment after use and assists team in keeping production space clean and organized. Assists with monthly inventory counts.
EDUCATION REQUIREMENT: No formal educational required.
EXPERIENCE REQUIREMENT: No prior experience or training.
OTHER SKILLS, ABILITIES, AND QUALIFICATIONS:
Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage. Demonstrates accepted ethical and professional business behavior. Executes ISO authority and responsibility.
Completes and maintains all required training.
Reports suspected violations including those of a business associate. Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly.
PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, and lift up to 50 lbs.
BENEFITS AND COMPENSATION:
The hourly rate for applicants in this position generally ranges between $17.25 and $19.55.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education.
All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.Apply for this ad Online! ....Read more...
Type: Permanent Location: Carrollton, Texas
Posted: 2025-07-25 15:10:50
-
JOB DESCRIPTION
Ensure EH&S compliance with Federal, state, and local regulations.
Monitor, interpret, and analyze EH&S laws, standards and regulations that impact business operations in Corsicana, Texas.
Assist with the management of site environmental programs including, but not limited to the following:
hazardous and non-hazardous waste management,
SPCC/SWPPP compliance
Air permit compliance
TSCA compliance
Alcohol permit compliance
Product stewardship
Deep well injection.
Compiles, calculates, and manages associated environmental and safety data and statistics and completes necessary and assigned EH&S facility record keeping requirements.
Assists with facilitation of required site, corporate, and government EH&S inspections and reporting.
Identifies and evaluates critical gaps in compliance or findings from incidence reports and collaborates with company executives, site leadership, and insurance risk management services to develop and implement corrective measures.
Provide expertise in the inspection, analysis, audit, and investigation of environmental and safety practices.
Assist with conducting regular safety and environmental system compliance audits and risk assessments.
Participate in the implementation of the site's Process Safety Management and risk management programs:
Audits
Site process development
Process Hazard Analysis (PHA)
Data management and reporting
ADDITIONAL DUTIES AND RESPONSIBILITIES
Assist with the creation of standard operating procedures for manufacturing processes for safety and environmental purposes and conduct training sessions as necessary to educate workers.
Evaluate, develop, and revise site safety management and hazard prevention programs and procedures to ensure a safe workplace for all employees, contractors, and visitors.
Develop, promote, and implement a proactive environmental and safety focused culture throughout the organization.
Assist with the development, promotion, and implementation of proactive plant-specific EH&S committees as necessary.
Drive awareness and accountability for EH&S performance through all levels of the organization
Provide investigation support and ensure root cause and other analysis techniques are harnessed to reduce further incidents.
Sustain productive and collaborative working relationships with all levels of the organization to promote proactive use of the EH&S initiatives.
Assist with the assessment of the organization's business practices.
Plan the long and short-term objectives for compliance, risk management, and development of training and compliance strategies.
EDUCATION & EXPERIENCE
Bachelor's Degree in Engineering, Occupational or Environmental Health and Safety, Environmental Science, or related discipline.
Preferred, 3+ years of on-the-job experience in leading and implementing EH&S programs in a manufacturing environment.
Demonstrated subject-matter expertise and knowledge of health, safety, and environmental regulations.
Prior experience working with local, state, and federal regulatory agencies is preferred.
LANGUAGE SKILLS
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.
Ability to write reports, business correspondence, and procedure manuals.
Ability to effectively present information and respond to questions from groups of managers and customers.
ADDITIONAL SKILLS REQUIRED
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
Ability to define problems, collect data, establish facts, and draw valid conclusions.
Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.
This position operates both in an office setting and on the Manufacture plant floor located outdoors.
Proficiency with MS Office, particularly Word and Excel; EHS information systems; and agency reporting software.
Ability to anticipate typical problems, identify potential or recurring problems, and take appropriate action proactively.
Ability to think critically, define problems, collect data, establish facts, and draw valid conclusions with a focus on continuous improvement.
Ability to interpret an extensive variety of mechanical instructions and deal with several abstract and concrete variables.
Demonstrated and verifiable ability to work and communicate effectively with all levels of the organization, e.g., from hourly employees to senior management.
Ability to communicate clearly and concisely both verbally and in writing and listen effectively; ability to present information to a diverse audience.
Proven leadership ability to effectively influence and lead others.
Ability to prioritize work, work autonomously and accept constructive feedback.
Ability to travel to other RPM facilities as required.
Wages: From 80K to 100K per year depending on experience and education
This position is bonus eligible
Benefits, upon satisfaction of applicable eligibility requirements, include but are not limited to: medical, dental, vision, life insurance, disability, vacation, parental leave, 401(k), employee stock purchase plan, and pension, etc..
Apply for this ad Online! ....Read more...
Type: Permanent Location: Corsicana, Texas
Posted: 2025-07-25 15:10:49
-
JOB DESCRIPTION
We are seeking experienced Commercial Roofers to join our team.
The skilled Commercial Roofers will be responsible for the maintenance, repairs, and installation of commercial roofing systems.
Benefits:
401K Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Installation of different types of roofing systems such as BUR, EPDM, Single-ply, coatings, and other forms of low-slope roofing systems Safe operation of tools of the trade (hand tools, power tools etc.) Follow OSHA regulations and other regulatory agencies relating to job site safety, demonstrates safe work practices. Work outside in a wide variety of weather conditions and to meet the physical demands of the position, including mobility needed to complete tasks. Climbing and operating on ladders, able to handle at least 50 lbs. Effective communication with foremen, supervisors, and other WTI and Tremco employees
Job Requirements:
Commercial Roofing: All levels; at least 1 year preferred Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical
The hourly rate for applicants in this position generally ranges between $20 and $33.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Benefits: Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
ABOUT US
Tremco Construction Products Group (CPG) brings together Tremco Incorporated's Commercial Sealants & Waterproofing and Roofing & Building Maintenance operating divisions; Dryvit Systems, Inc.; Nudura Inc.; Willseal; Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada, Inc.
Structures with Tremco CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
Six-sided solutions from Tremco CPG companies deliver demonstrable performance at the lowest possible life-cycle cost, and stop leaks before they happen through ongoing maintenance programs.
Building owners gain the peace of mind that comes with industry-leading system warranties - all from a single source platform.Apply for this ad Online! ....Read more...
Type: Permanent Location: Alachua, Florida
Posted: 2025-07-25 15:10:49
-
JOB DESCRIPTION
We are seeking experienced Commercial Roofers to join our team.
The skilled Commercial Roofers will be responsible for the maintenance, repairs, and installation of commercial roofing systems.
Benefits:
401K Health Insurance Paid time-off Mileage reimbursement Continuing education
Position Duties & Responsibilities:
Installation of different types of roofing systems such as BUR, EPDM, Single-ply, coatings, and other forms of low-slope roofing systems Safe operation of tools of the trade (hand tools, power tools etc.) Follow OSHA regulations and other regulatory agencies relating to job site safety, demonstrates safe work practices. Work outside in a wide variety of weather conditions and to meet the physical demands of the position, including mobility needed to complete tasks. Climbing and operating on ladders, able to handle at least 50 lbs. Effective communication with foremen, supervisors, and other WTI and Tremco employees
Job Requirements:
Commercial Roofing: All levels; at least 1 year preferred Reliable form of transportation Acceptable background check per company standards Ability to pass a pre-employment drug screen and physical
The hourly rate for applicants in this position generally ranges between $20 and $33.
This range is an estimate, based on potential employee qualifications, operations, needs, and other considerations permitted by law. Benefits: Tremco offers a variety of benefits to its employees, including not limited to: health insurance, paid time off, 401(k) with company match, Company Pension Plan, and continuing education. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.
ABOUT US
Tremco Construction Products Group (CPG) brings together Tremco Incorporated's Commercial Sealants & Waterproofing and Roofing & Building Maintenance operating divisions; Dryvit Systems, Inc.; Nudura Inc.; Willseal; Weatherproofing Technologies, Inc.
and Weatherproofing Technologies Canada, Inc.
Structures with Tremco CPG systems are easier to build and maintain, virtually impervious to the elements, and can provide any look desired.
Six-sided solutions from Tremco CPG companies deliver demonstrable performance at the lowest possible life-cycle cost, and stop leaks before they happen through ongoing maintenance programs.
Building owners gain the peace of mind that comes with industry-leading system warranties - all from a single source platform.Apply for this ad Online! ....Read more...
Type: Permanent Location: Alachua, Florida
Posted: 2025-07-25 15:10:48
-
Project Manager
Location: Maidstone Outskirts
Contract Type: 18 months FTC
Salary: £Great + bens
- Join a global leader in manufacturing
- Manage complex medium to large capital projects in a continuous operating facility
- Competitive salary, private medical cover, and company pension (6% employer contribution)
- Opportunities for quick career progression and continuous improvement
Our client, a trusted partner to companies across the world, is seeking an experienced Project Manager to support the execution of the strategic plan.
In this role, you will have the opportunity to implement complex medium to large capital projects in a safe, compliant, and professional manner.
Position Overview
As a Project Manager, you will play a crucial role in managing a team of engineers and specialists to deliver high-quality projects on time, without impacting production.
You will be responsible for project proposals, budgeting, design, installation, training, and commissioning, ensuring adherence to world-class health and safety practices throughout the project lifecycle.
Responsibilities
- Manage a team of engineers and specialists from proposal and budget through design, installation, training, and commissioning
- Produce schematics, proposals, and detailed cost estimates for revenue or capital projects
- Define the scope of supply and conduct pre-engineering work to support accurate project costs
- Specify and check drawings for component production and equipment installation, and provide technical supervision to designers/consultants
- Program project steps, from preliminary work to installation, including drawings, ordering, manufacture, and progress reports
- Ensure compliance with all relevant legislation, such as CDM requirements, and contractor control procedures
- Coordinate commissioning with the operations team and work closely with the Purchasing function to define the best guarantees and contract details for the project
- Maintain financial control of the project, ensuring budget adherence and best value at all times
Requirements
- Previous project management experience in projects >£10M
- Qualification in an Engineering discipline
- Project Management qualification
- Health and Safety qualification
- Strong interpersonal skills and the ability to communicate clearly in writing and orally
- Competent use of Excel and Word
- Self-motivated, flexible, and a team player
- Willingness to adapt to a changing role and a commitment to self-development
Company Overview
Our client is a global leader who offers an unparalleled portfolio of innovative solutions.
With the circular economy at the core of their business, they use renewable, recyclable, and recycled materials to create a variety of solutions.
As a trusted partner, they are dedicated to delivering meaningful value for shareholders, customers, employees, and the communities where they operate.
Benefits
-Competitive salary
- Private medical cover
- Company pension (6% employer contribution and minimum of 3% employee)
- Quick career progression opportunities
At KHR we take care to ensure that you are represented as well as possible so it is worth checking your CV for layout, spelling and grammar as well as making sure it is up to date before you submit.
If you feel you need to highlight particular qualifications, skills or relevant experience with regards to a specific role then please add a cover letter or a preface page.
This does not need to be formatted in the same manner.
In addition, if your CV is heavy with graphics etc, please could you also submit a "clean" copy in Word.
Thank you.
KH Recruitment Ltd is acting as an Employment Business in relation to this vacancy.
KHR - Recruitment Specialists is a trading name of KH Recruitment Ltd.
Keep in touch with us online for job alerts, industry updates and market trends…
....Read more...
Type: Contract Location: Maidstone, England
Start: 01/09/2025
Duration: 18 months
Salary / Rate: Great + Benefits
Posted: 2025-07-25 14:57:48
-
A well-established engineering and manufacturing business is seeking a CNC Machinist with Mazak machine experience to join their late shift operations team.
This is a fantastic opportunity to work in a clean, safe, and forward-thinking environment where continuous improvement, training, and collaboration are valued.
Shift Pattern:, Mon-Thurs: 14:30 to 22:30 (½ hour lunch), Fri: 12:30 to 20:00
Key Responsibilities:, Set and operate Mazak CNC machinery (Mazatrol and G-code), Maintain consistent product quality to meet high-precision specifications, Read and interpret engineering drawings and CNC programs, Adhere to company Health & Safety policies and 5S workplace standards, Support cross-training, skills sharing, and continuous improvement initiatives, Maintain productivity and meet production schedules across a varied workloadRequired Skills & Experience:, Strong experience operating Mazak CNC machines, Confident reading and interpreting CNC code (ISO/G-code and Mazatrol), Ideally apprentice-trained with relevant engineering qualifications, Background in both milling and turning techniques is advantageous, Comfortable working with Edgecam, Mastercam, or Mazatrol (offline programming is a plus), Excellent communication skills with a proactive, hands-on approach, Working knowledge of modern manufacturing practices including CI/Lean principles and 5S, Computer literate with Microsoft Office toolsPreferred:, Previous experience in a precision or heavy engineering environment, Familiarity with machining a variety of materials, including cast metals and alloys, Strong problem-solving abilities and attention to detailWhat's In It For You?, Competitive pay plus 20% uplift for late shift hours, Supportive and inclusive work culture with a focus on teamwork and safety, Exposure to modern machining technologies and innovation projects, Long-term role in a stable, growing organisation with training opportunitiesIf you're an experienced CNC Machinist with Mazak expertise and looking for a new challenge on a late shift, we'd love to hear from you.
Apply today or contact us confidentially to find out more. ....Read more...
Type: Permanent Location: Havant, England
Posted: 2025-07-25 14:38:14
-
The Maintenance Electrician vacancy is working with a market leading Blue Chip Manufacturing firm in the Stanford Le Hope area.
The position offers excellent opportunities for both training and career development and development.
Fully automated site working with a market leading FMCG Manufacturing company.What's in it for your as a Maintenance Electrician:
Hours of work - Days and Nights 4 on 4 off - 6am to 6pm
Salary - Circa £60,000 per annum (Including Shift Allowance)
Location - Sandford Le Hope , Essex
Annual KPI Bonus
OT paid at 1.5 and 2x
Completive Pension
Employee Benefits Package
Training and career development opportunities
Main Duties & Responsibilities of Maintenance Electrician include:
Providing plant-wide maintenance service, departmental support and repairs ensuring that all production targets are maintained - maintaining factory manufacturing machinery
Monitor & supply Engineering support of machine set-up & changeovers to ensure that the product conforms to any quality assurance standards and ensuring changeovers are as efficient as possible.
Experience and Qualifications Required for Maintenance Electrician:
Recognised Engineering Apprenticeship & Qualification or equivalent, e.g.
NVQ, City and Guilds, ONC, BTEC or above - Mechanical or Electrical
High degree of Health & Safety awareness.
Ability to fault find, repair and provide solutions to problems.
....Read more...
Type: Permanent Location: Basildon, England
Start: ASAP
Salary / Rate: Up to £59000.00 per annum
Posted: 2025-07-25 14:34:27
-
A leading global engineering company with a strong presence in the advanced manufacturing sector is currently seeking a skilled CNC Milling Machinist to join their precision machining team on the late shift.
This is an exciting opportunity to join a forward-thinking business driving innovation, quality, and sustainability in complex manufacturing solutions.
Shift Pattern:, Mon-Thurs: 14:30 to 22:30 (½ hour lunch), Fri: 12:30 to 20:00
Key Responsibilities:, Set up and operate CNC milling machines using Heidenhain controls, Ensure quality standards are met through process control and inspection, Interpret and work from engineering drawings and work instructions, Maintain a safe working environment and adhere to Health & Safety procedures, Support continuous improvement (CI) initiatives and contribute to Lean manufacturing goals, Maintain a clean, organized work area in line with 5S principles, Participate in cross-training and support skills flexibility across the teamEssential Requirements:, Extensive experience programming and operating CNC milling machines with Heidenhain controls, Time-served apprenticeship, equivalent engineering qualification or relevant work experience, Strong understanding of engineering drawings and manufacturing processes, Proven experience in a machining environment, including CNC programming, Familiarity with turning techniques and handling a range of materials including castings, Inconel, Aluminium Bronze, Cast Iron, Duplex, and Stainless Steel, Awareness of Health & Safety best practices in an engineering environment, Excellent communication skills (written and verbal)Desirable:, Experience working with composite materials, CI/Lean Manufacturing knowledge (e.g., 7 wastes, 5S)What's On Offer:, Competitive salary with 20% shift uplift for late shift pattern, Stable, long-term opportunity with a market-leading business, Access to career progression and ongoing development, Opportunity to contribute to innovative projects in a high-spec engineering environmentIf you're an experienced CNC Milling Machinist with Heidenhain expertise looking for your next challenge on a late shift pattern, we want to hear from you.
Apply now or reach out for a confidential conversation. ....Read more...
Type: Permanent Location: Havant, England
Salary / Rate: 20% Late Shift Uplift
Posted: 2025-07-25 14:28:26
-
Deputy Store Manager - Charity Retail Superstore
Location: Oxford, Oxfordshire Salary: £27,000 -£29,000 per annum (dependent on experience) Hours: Full-time (37.5 hours per week, including weekends)
Store Opening Hours: Monday - Saturday 9:30am - 5pm and Sunday 10am - 4pm
Are you an experienced retail professional with a passion for people, purpose and pre-loved goods? This is your chance to make a real difference in the community while building your leadership career in the charity retail sector.
A well-established charity retailer in Oxford is looking for a Deputy Store Manager to support the day-to-day running of its flagship store and wider retail operation.
This is more than a shop, it's a place of social impact, where retail meets rehabilitation, reuse and reinvestment in people.
About the Role
As Deputy Store Manager, you will work closely with the Store Manager and a small leadership team to ensure the smooth, safe, and commercially successful running of the store.
You will lead from the front, supporting, developing and motivating a diverse team of staff, volunteers and programme participants.
This is a hands-on, multi-faceted role that spans shop floor leadership, people management, operational coordination, and community engagement.
Key Responsibilities:
Support the Store Manager in all areas of store operations and deputise in their absence
Lead and inspire a team of volunteers and programme participants (Companions) to deliver excellent customer service and achieve sales targets
Oversee shop floor standards, health and safety checks and day-to-day operational excellence
Support stock control and ensure smooth coordination with the collections and deliveries team
Contribute to financial performance through accurate till procedures and cost controls
Help maintain a welcoming, inclusive, and purposeful retail environment in line with the charity's values
Work collaboratively across the wider retail and support team
About You:
Essential:
Previous retail leadership/supervisory experience and a strong customer focus
Strong leadership and delegation skills
Excellent communication, organisation and time management
Ability to work weekends on a rota basis
Desirable:
Retail management experience in charity or second-hand retail
Experience working with vulnerable individuals or those with challenging behaviours would be advantageous
Experience supervising volunteers
First Aid or Health and Safety qualifications
Passion for sustainability and social impact
Why Apply?
Join a purpose-driven organisation making a difference in Oxfordshire
Work in a values-led environment with a focus on community, inclusion and sustainability
Help transform lives while developing your own leadership career
Competitive salary and supportive team culture
Ready to step into a meaningful retail management role?
Apply today and be part of something bigger.
By applying for this role, you are consenting for C2 Recruitment to hold and process your data in compliance with the General Data Protection Regulations.
To view other great vacancies at C2 Recruitment, please visit our website or call us for a confidential chat about upcoming opportunities in:
Buying & Merchandising and Ecommerce | Charity & Non Profit | Design, Technical, Wholesale & Production | Finance | HR & Talent | H&S & Compliance | Hospitality, Catering & Leisure | Marketing, Digital & Technology | Office & Administration | Property & Centre Management | Retail, Trade and Luxury Operations | Senior Appointments & Executive | Sales & FMCG | Supply Chain & Logistics & Warehouse | Manufacturing & Engineering
....Read more...
Type: Permanent Location: Oxford, England
Salary / Rate: £27000 - £29000 per annum + Great Benefits
Posted: 2025-07-25 14:14:45
-
The Maintenance Engineer vacancy is working with a market leading Blue Chip Manufacturing firm in the Stanford Le Hope area.
The position offers excellent opportunities for both training and career development and development.
Fully automated site working with a market leading FMCG Manufacturing company.What's in it for your as a Maintenance Engineer:
Hours of work - Days and Nights 4 on 4 off - 6am to 6pm
Salary - Circa £60,000 per annum (Including Shift Allowance)
Location - Sandford Le Hope, Essex
Annual KPI Bonus
OT paid at 1.5 and 2x
Completive Pension
Employee Benefits Package
Training and career development opportunities
Main Duties & Responsibilities of Maintenance Engineer include:
Providing plant-wide maintenance service, departmental support and repairs ensuring that all production targets are maintained - maintaining factory manufacturing machinery
Monitor & supply Engineering support of machine set-up & changeovers to ensure that the product conforms to any quality assurance standards and ensuring changeovers are as efficient as possible.
Experience and Qualifications Required for Maintenance Engineer:
Recognised Engineering Apprenticeship & Qualification or equivalent, e.g.
NVQ, City and Guilds, ONC, BTEC or above - Mechanical or Electrical
High degree of Health & Safety awareness.
Ability to fault find, repair and provide solutions to problems.
The position may suit a Mechanical Maintenance Engineer, Electrical maintenance engineer, maintenance fitter, maintenance electrician, multi-skilled engineer etc ....Read more...
Type: Permanent Location: Basildon, England
Start: ASAP
Salary / Rate: Up to £59000.00 per annum
Posted: 2025-07-25 14:14:22
-
Store Manager - Charity Retail
Ealing, London
Fantastic Opportunity to join a growing charity retailer
Salary £26,650 per annum
Our client is a well-established, growing charity retailer.
They currently have an exciting opportunity to join them in the position of Store Manager to manage their store in Ealing.
Beautiful location, amazing store with huge potential to make it an even bigger success!
As the Shop Manager your primary responsibility is to maximise income generation and ensure all targets are met and exceeded.
Responsibilities:
You will work closely with the Area Manager so they can understand your stock requirements and be responsible for overseeing the maintenance and health & safety of the shop.
Responsible for the smooth running of the store in accordance with company guidelines
Deliver annual store financial and contribution targets.
Deliver against store KPI's.
Lead and develop your team.
Recruitment and selection of new team members.
Visual merchandising the store, maximising all opportunities.
Driving new business into the store.
Liaising with the local community.
Recruiting volunteers for the store.
Experience required:
Previous Store Manager/Assistant Manager experience within charity or retail.
Have the ability to engage customers through outstanding communication, questioning and listening skills.
KPI aware and driven.
Experience of working to targets in a customer focused environment.
Energy, drive and a positive can-do attitude.
Flexible to cover store opening hours and weekends.
Proven track record of successful delivery of a high growth, profitable operation.
Experience in managing a large team of volunteers, including recruitment and development, as well as excellent customer service and supporter relationship building skills.
An understanding of charity retail would be a distinct advantage and a passion for the charity sector.
Flexible to work weekends.
If you are interested in working for a leading charity retailer who truly values their teams then please apply today with your cv and covering letter.
By applying for this role, you are consenting for C2 Recruitment to hold and process your data in compliance with the General Data Protection Regulations.
To view other great vacancies at C2 Recruitment, please visit our website or call us for a confidential chat about upcoming opportunities in:
Buying & Merchandising and Ecommerce | Charity & Non Profit | Design, Technical, Wholesale & Production | Finance | HR & Talent | H&S & Compliance | Hospitality, Catering & Leisure | Marketing, Digital & Technology | Office & Administration | Property & Centre Management | Retail, Trade and Luxury Operations | Senior Appointments & Executive | Sales & FMCG | Supply Chain & Logistics & Warehouse | Manufacturing & Engineering
....Read more...
Type: Permanent Location: North West London, England
Salary / Rate: Up to £26650 per annum + Great Benefits
Posted: 2025-07-25 14:13:19
-
Summer Temp - Stock Replenisher - Part Time / Temporary
£13.68 per hour inclusive of holiday pay (£12.21 per hour + £1.47 = £13.68 p/h holiday pay)
LOCATIONS: ASHFORD, CROOKSFOOT - TN24 0YE
Are you looking for a Summer Job in Retail?
RAS Store Support have Stock Replenishment opportunities for a long-standing major UK client to support with their annual summer promotional event.
Stock Replenishers will unpack and sort inbound deliveries of school uniform and other clothing and accessories to ensure the clothing department is replenished to an exceptional standard.
What we are looking for:
Reliable and dependable people with an interest in retail.
Excellent and effective communicators with ability to work under pressure.
Hard working and energetic individuals who can manage manual handling and lifting.
Key Responsibilities:
Unpack, sort and tag stock from inbound deliveries and warehouse back-up.
Prepare the stock ready for merchandising.
Maintain excellent replenishment standards and ensure fixtures and working areas are always clean and tidy.
Work with the clothing department colleagues to ensure all tasks are completed ready for trading.
Interacting with customers and provide service when required.
Ensuring Health and safety procedures are always adhered to.
Successful Candidate Essentials:
Complete the e-learning induction prior to attending first shift.
Must have access and use of a mobile device with location services activated for the purposes of time and attendance tracking.
Ability to commit to the duration of the schedule.
What you'll get in return:
£12.21 per hour plus holiday accrual + £1.47 = £13.68 p/h
Up to 6 shifts per week between Monday to Saturday (Store dependent)
Depending on store, either 3-hour shift (6-9pm) or 4-hour shift (6-10pm)
Access to earnings in advance of pay day via Wagestream
Opportunity to further develop your career in Retail Merchandising With RAS.
This role is being handled by Retail & Asset Solutions (RAS).
To discuss this vacancy or any other great positions we have please call us on 01689 879444 for a confidential chat about working for our business.
By applying to this role, you are consenting to Retail & Asset Solutions to hold and process your data in compliance with the General Data Protection Regulations.
If you have any questions or wish to exercise your right to access, erase or restrict the holding or processing of your data then please contact us at applications@retailassetsolutions.com and we will respond to your query as soon as possible. ....Read more...
Type: Contract Location: Ashford, England
Start: 22/07/2025
Duration: 7 WEEKS
Salary / Rate: Up to £13.68 per hour
Posted: 2025-07-25 14:11:07
-
Our Client, a major Rail, Highways, Power and Tunnels consultancy are seeking a highly skilled and experienced and forward-thinking Head of Electrical Engineering to spearhead and develop our Electrical Engineering and Design function.
This is a critical leadership role where you will drive technical excellence, support major infrastructure projects, and mentor the next generation of engineers.
As the Head of Electrical Engineering, you will be responsible for building and managing our Electrical Engineering team, developing our in-house design capabilities, and ensuring all works are delivered safely, efficiently, and to the highest standards.
Responsibilities:
* Lead, develop, and mentor the Electrical Engineering team.
* Establish and grow VVB's Electrical design capabilities.
* Provide technical leadership on all electrical systems (LV, HV up to 33kV, lighting, CMS, earthing, UPS, VSDs, DCS, PLC, SCADA, BMS, etc.).
* Ensure engineering works comply with HSE regulations and standards.
* Develop and maintain engineering processes and procedures.
* Support business growth through technical input into tenders and client relationships.
* Ensure robust peer-review and audit processes for project compliance and learning.
* Support accident investigations and oversee project safety from a technical perspective.
* Champion continuous improvement, knowledge sharing, and CPD across the company.
Skills and Experience:
* Strong technical knowledge of Electrical and Process Design, installation standards, BIM, DSEAR and HSE legislation.
* Proficiency in Electrical design software (e.g., Amtech, E-tap, Dialux).
* Hands-on experience with low and high voltage systems up to 33kV.
* Strong leadership, mentoring, and people development skills.
* Experience with hazardous area design (ATEX compliance).
* Sound understanding of design risk assessment and compliance requirements.
Qualifications:
* Degree in Electrical Engineering.
* NEBOSH Construction Health and Safety Certificate.
* Chartered Engineer (CEng) registered with the Engineering Council.
* Membership of a recognised institution (IMechE, CIBSE, IET or equivalent).
* BS 7671 (18th Edition Wiring Regulations).
* C&G Inspection and Testing 2391-52 qualification.
* Full UK Driving Licence.
Desired:
* Master's Degree in Electrical Engineering.
* Project management qualification (APM, Prince2 or equivalent).
* Sustainability awareness.
* Authorised Engineer training.
Competencies:
* Collaborative and forward-thinking leader.
* Decisive under pressure, able to prioritise and delegate effectively.
* Flexible, with a positive ‘can do' attitude.
* Experienced mentor for graduate and junior engineers.
* Strong leadership and excellent communication skills.
* Fluent in English, both written and verbal, at a technical level.
* Builds strong relationships at all levels of the business and with clients.
* Balances client needs with business objectives.
* Self-motivated with a drive for both personal and company development.
* Willingness to travel nationally and stay overnight if required.
* IT proficient (MS Word, Excel, PowerPoint).
Experience:
* Minimum 15 years' experience in an infrastructure or heavy industrial environment.
* Hands-on experience as a Design Engineer, Project Engineer, and Commissioning Engineer.
* Experience working for both M&E contractors and client/main contractors.
* Network Rail CRE (Contractor's Responsible Engineer) experience.
If you are interested in this job, please send over your cv and get in touch with Jamie at Unity Recruitment.
Alternatively if you know anyone who might be interested in this job opportunity, please send over for a referral fee.
....Read more...
Type: Permanent Location: City of London, England
Start: ASAP
Salary / Rate: £100000 - £120000 per annum + Negotiable based on experience
Posted: 2025-07-25 12:32:08
-
Demonstration Driver
Location: Covering UK/Europe
Contract Type: Permanent
Salary: £48,344.00
Join a global leader in environmentally focused vehicle design & manufacturing.
Demonstrate industry-leading, performance-focused vehicles to customers across the UK and Europe
Enjoy a competitive salary package, 25 days holiday + bank holidays, pension, and cash plan benefits
Be part of a company that values respect, communication, teamwork, recognition, and quality
Our client, a well-established global leader in the design and manufacture of vehicles, is seeking an experienced Demonstration Driver to join their team.
This is an exciting opportunity for a skilled driver with a passion for environmentally conscious, performance-focused solutions to showcase the company's industry-leading products to customers across the UK and Europe.
Position Overview
As a Demonstration Driver, you will play a crucial role in showcasing our client's vehicles to potential and existing customers.
You will be responsible for demonstrating the effective use of these vehicles, ensuring that customers are confident and competent in their basic operations.
Your expertise and professionalism will contribute to the overall success of the company by driving customer satisfaction and promoting the company's commitment to environmentally focused solutions.
Responsibilities
Demonstrate the effective use of vehicles to potential and actual customers, answering questions accurately and positively
Drive the designated vehicle in accordance with the Highway Code, exercising due care and attention at all times
Complete daily vehicle checks to ensure roadworthiness and provide basic maintenance, reporting any defects to the Transport & Fleet Manager
Ensure that vehicle demonstrations are carried out at times required by the customer/RSM and used to their full potential
Keep machines clean, tidy, and maintained following operational requirements, washing vehicles weekly as a minimum
Load vehicles onto transporters where necessary, ensuring due care and attention to minimise the risk of damage
Drive loaded vehicles to customers as required, unloading in compliance with relevant procedures
Complete work records as required, including a daily route log and any other necessary documentation
Maintain safe and legal telephone contact with the sales office to report problems and receive changes in instructions
Report any accidents, "near misses", damage, and significant hazards to the Transport & Fleet Manager and the Health and Safety Manager
Ensure that all work undertaken complies with statutory regulations, codes of practice, and operating procedures
Complete all demo pre- and post-reports
Travel within the UK and Overseas as directed, staying away and working outside core hours to suit the needs of the customer and sales team
Company Overview
Our client is a global leader in the design and manufacture of vehicles, renowned for their industry-leading, environmentally focused products.
Their commitment to developing performance-focused, environmentally conscious products has positioned them at the forefront of the industry.
Benefits
Competitive salary package
25 days holiday + bank holidays
Pension scheme
Cash plan benefits
Bereavement leave
Non-contributory life assurance
Alongside this attractive benefits package, you'll be part of a company that values respect, communication, teamwork, recognition, and quality.
Our client fosters a supportive and collaborative work environment where your contributions will be recognised and celebrated.
At KHR we take care to ensure that you are represented as well as possible so it is worth checking your CV for layout, spelling and grammar as well as making sure it is up to date before you submit.
If you feel you need to highlight particular qualifications, skills or relevant experience with regards to a specific role then please add a cover letter or a preface page.
This does not need to be formatted in the same manner.
In addition, if your CV is heavy with graphics etc, please could you also submit a "clean" copy in Word.
Thank you.
KH Recruitment Ltd is acting as an Employment Agency in relation to this vacancy.
KHR - Recruitment Specialists is a trading name of KH Recruitment Ltd Keep in touch with us online for job alerts, industry updates and market...
....Read more...
Type: Permanent Location: Maidstone, England
Start: 08/08/2025
Salary / Rate: Up to £48344.00 per annum + + Benefits
Posted: 2025-07-25 09:55:54
