-
JOB DESCRIPTION
The Process Engineer is responsible for evaluating and improving processes within Stonhard manufacturing operations.
Additionally, the Process Engineer is responsible for implementation of continuous improvement initiatives, capital project support, production efficiency, maintenance process improvements, and equipment reliability.
Essential Functions
Lead root cause analysis for process failures.
Develop and maintain standard work instructions.
Develop and maintain Process Failure Mode Effect Analysis for areas of responsibility.
Improves production line efficiency to show a measurable increase in OEE.
Support maintenance in equipment troubleshooting.
Working knowledge of I/O, PLC, and 24V controls is preferred.
Programming a plus.
Experience with Manufacturing Execution Systems preferred.
Design and coordinate fabrication of manufacturing support components.
Support day-to-day production operations.
Re-engineer existing equipment to meet new optimization, reliability, safety, throughput, and process requirements.
Evaluate and make recommendations, which will increase output and decrease costs by addressing/improving workflow, ergonomics, time/motion characteristics, cycle-times, set-up times, waste, etc.
Confer with management and general staff to implement plans and recommendations.
Ensure CI project goals are met and sustained through the development of effective control plans.
Ensure Continuous Improvement processes and procedures are followed and adhered to through auditing and process confirmation practices.
Lead C.I.
initiatives in areas of 5S, Waste Reduction, Value-Stream Mapping, etc.
Ensure appropriate validations are completed as part of solution implementation.
Downtime Loss Analysis and Reduction - Start-up & Changeovers downtime improvement
Equipment failure (Structured failure analysis 5W's, Fishbone analysis)
Minimum Requirements
Bachelor's degree in engineering
Lean and/or Six Sigma preferred but not required.
Minimum 5 years of manufacturing experience preferably in a GMP environment.
Physical Requirements
While performing the duties of this position, the employee is regularly required to use hands to finger, handle, or feel and talk or hear.
The employee is frequently required to stand; walk and reach with hands and arms.
The employee is occasionally required to sit; stoop, kneel, crouch, or crawl.
The employee must regularly lift and /or move up to 10-25 pounds; frequently lift and/or move up to 50 pounds.
Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and ability to adjust focus.
Benefits and Compensation
The pay range for applicants in this position generally ranges between $65,000 and $75,000.
The range is an estimate based on potential employee qualification operations, needs, and other considerations permitted by law.
In addition to career advancement and growth, continuous training, and mentoring opportunities, Stonhard offers an excellent comprehensive health plan and financial benefits program including but not limited to, paid holidays, paid time off, 401(k) with company match, Company Pension Plan and Stock Purchase Plans.
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Fort Wayne, Indiana
Posted: 2026-01-16 22:08:16
-
Construction Planner
West London
£50,000 - £60,000 + Job security + Travel Paid For + Company Paid Expenses + Pension + Holidays + IMMEDIATE START!
Join a tight knit property development and construction company as a Construction Planner, where you will be given the opportunity to work on exciting, ongoing projects while feeling valued and appreciated for your contributions.
This key role is central to ensuring the successful planning, coordination, and delivery of complex residential construction projects from initial concept through to completion.
As a Construction Planner, you will work closely with project managers, site teams, subcontractors, and stakeholders to develop and maintain construction schedules that drive operational efficiency and ensure projects are delivered on time, within scope, and to the highest quality standards.
So if you are looking for a role that offers stability, career growth, and the opportunity to be truly valued within a company, this is the position for you.
Apply now to join a supportive and forward-thinking team.
Your Role A Construction Planner will Include:
* Develop and maintain detailed construction schedules for complex projects using planning software
* Monitor project progress and performance, identifying and reporting on any delays or risks
* Support pre-construction planning, including preparing baseline programs The Successful Construction Planner Will Need:
* Experience as a Construction Planner within the UK sector
* Degree in Construction, Civil Engineering or Similar
* Understanding of construction processes
* Willing to work in office and onsite For immediate consideration please call Matthew on 07458163042 or click to apply
Keywords: Construction Planner, Building Construction, Construction, Programme planning, Progress monitoring, Residential, New builds, Commercial construction, Civil engineering, London, Acton, East ham, Brixton, Tottenham, Croydon, Wembley, Wimbledon ....Read more...
Type: Permanent Location: City of London, England
Start: ASAP
Duration: permanent
Salary / Rate: £50000 - £60000 per annum + £50,000 – £60,000 + Job security
Posted: 2026-01-16 17:24:09
-
Engineering Manager - Technical Services
Salary: £49,677 - £52,509
Benefits: Excellent benefits package + Car Allowance
Please note: This role is open to experienced Engineering Managers and engineers who are ready to step up into management.
Full support and training will be provided where required.
We are seeking an experienced and motivated Engineering Manager to lead a multidisciplinary Engineering Team within Technical Services.
This is a senior role with responsibility for people management, budgets, contracts, and a diverse engineering and infrastructure portfolio.
You will have overall responsibility for the management, delivery, and financial control of the Engineering Team, ensuring high-quality delivery of engineering, asset management, CCTV, car parking, and infrastructure services in line with organisational priorities, legislative requirements, and financial constraints.
Key Responsibilities
- Provide strategic and operational management of the Engineering Team, including CCTV and car park maintenance and inspection.
- Lead, manage and develop staff, including appraisal, deployment, motivation and discipline.
- Manage service budgets, ensuring effective financial control and value for money.
- Act as the Service lead for Health and Safety and represent the Service on the corporate Health and Safety Group.
- Assist the Head of Technical Services with operational management, service priorities, policy development and performance monitoring.
- Manage and deliver engineering projects relating to car parking, drainage, bridges and organisational land assets.
- Oversee inspection, maintenance and management of bridges.
- Manage winter maintenance and drainage inspection regimes.
- Oversee the Electric Vehicle charge point contract within car parks.
- Liaise with partners and contractors in relation to CCTV operations and contracts.
- Assist with flooding issues and liaise with relevant external agencies.
- Prepare reports, management information and statutory returns accurately and on time.
- Support the Head of Technical Services with budget preparation and financial management.
- Ensure compliance with all relevant legislation, policies, Standing Orders and Financial Rules.
Essential Requirements:
- Significant experience managing engineering or technical services.
- Proven experience in managing staff, budgets and contracts.
- Strong knowledge of Health and Safety legislation and compliance.
- Experience in project and asset management.
- Ability to produce clear professional reports and provide technical advice.
Full driving licence and ability to meet Essential Car User requirements.
At KHR we take care to ensure that you are represented as well as possible so it is worth checking your CV for layout, spelling and grammar as well as making sure it is up to date before you submit.
If you feel you need to highlight particular qualifications, skills or relevant experience with regards to a specific role then please add a cover letter or a preface page.
This does not need to be formatted in the same manner.
In addition, if your CV is heavy with graphics etc, please could you also submit a "clean" copy in Word.
Thank you.
KH Recruitment Ltd is acting as an Employment Agency in relation to this vacancy.
KHR - Recruitment Specialists is a trading name of KH Recruitment Ltd Keep in touch with us online for job alerts, industry updates and market...
....Read more...
Type: Permanent Location: West Malling, England
Start: 30/01/2026
Salary / Rate: £49677 - £52509 per annum + + Benefits
Posted: 2026-01-16 17:02:22
-
An opportunity has arisen for CNC Machinist / Toolmakerto join a well-established engineering firm known for supplying specialist tooling solutions across multiple technical sectors.
As a CNC Machinist / Toolmaker, you will be working on intricate machining tasks using both CNC and manual equipment, contributing to the manufacture of specialist components.
This full-time role offers salary range of £24,400 - £35,000 and benefits.
You will be responsible for:
* Setting and operating both manual and CNC machines for precision hole drilling.
* Producing highly accurate components, some requiring holes as small as 0.02mm.
* Interpreting technical drawings and ensuring exact measurements are met.
* Designing and manufacturing fixtures and tooling for bespoke applications.
* Collaborating with a small, skilled team to deliver meticulous engineering outcomes.
* Supporting the development of machining processes through continuous improvement.
What we are looking for:
* Previously worked as a Toolmaker, CNC Machinist, CNC Programmer, CNC Operator, CNC Setter, CNC Setter Operator, CNC Turner, CNC Miller or in a similar role.
* Experience operating and programming CNC machines, ideally involving high-precision components.
* Skilled in using manual mills and lathes to support specialist fixture creation.
* Exposure to small hole drilling techniques within a precision or toolmaking environment.
* Ability to read and interpret engineering diagrams with accuracy.
What's on offer:
* Competitive salary
* Company pension
* On-site parking
* Private medical insurance
* Supportive, close-knit team environment
* Opportunity to grow with new CNC technology and processes
Apply today for this excellent opportunity to develop your career with a forward-thinking organisation.
Important Information: We endeavour to process your personal data in a fair and transparent manner.
In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone, or text message.
For more information see our Privacy Policy on our website.
It is important you are aware of your individual rights and the provisions the company has put in place to protect your data.
If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Type: Permanent Location: Horley, England
Start:
Duration:
Salary / Rate: £24400 - £35000 Per Annum
Posted: 2026-01-16 17:02:19
-
An opportunity has arisen for CNC Machinist / Toolmakerto join a well-established engineering firm known for supplying specialist tooling solutions across multiple technical sectors.
As a CNC Machinist / Toolmaker, you will be working on intricate machining tasks using both CNC and manual equipment, contributing to the manufacture of specialist components.
This full-time role offers salary range of £24,400 - £35,000 and benefits.
You will be responsible for:
* Setting and operating both manual and CNC machines for precision hole drilling.
* Producing highly accurate components, some requiring holes as small as 0.02mm.
* Interpreting technical drawings and ensuring exact measurements are met.
* Designing and manufacturing fixtures and tooling for bespoke applications.
* Collaborating with a small, skilled team to deliver meticulous engineering outcomes.
* Supporting the development of machining processes through continuous improvement.
What we are looking for:
* Previously worked as a Toolmaker, CNC Machinist, CNC Programmer, CNC Operator, CNC Setter, CNC Setter Operator, CNC Turner, CNC Miller or in a similar role.
* Experience operating and programming CNC machines, ideally involving high-precision components.
* Skilled in using manual mills and lathes to support specialist fixture creation.
* Exposure to small hole drilling techniques within a precision or toolmaking environment.
* Ability to read and interpret engineering diagrams with accuracy.
What's on offer:
* Competitive salary
* Company pension
* On-site parking
* Private medical insurance
* Supportive, close-knit team environment
* Opportunity to grow with new CNC technology and processes
Apply today for this excellent opportunity to develop your career with a forward-thinking organisation.
Important Information: We endeavour to process your personal data in a fair and transparent manner.
In applying for this role, Additional Resources will be acting in your best interest and may contact you in relation to the role, either by email, phone, or text message.
For more information see our Privacy Policy on our website.
It is important you are aware of your individual rights and the provisions the company has put in place to protect your data.
If you would like further information on the policy or GDPR please contact us.
Additional Resources Ltd is an Employment Business and an Employment Agency as defined within The Conduct of Employment Agencies & Employment Businesses Regulations 2003.
....Read more...
Type: Permanent Location: Horley, England
Start:
Duration:
Salary / Rate: £24400 - £35000 Per Annum
Posted: 2026-01-16 17:00:13
-
We are looking for a Head of IC Design Development to lead our digital engineering team focused on next-generation capacitive touch controllers and automotive microcontrollers (MCUs).
This is a senior role with technical and managerial responsibilities, offering the chance to shape product strategy, define digital architecture, and directly influence the delivery of cutting-edge semiconductor solutions.
This is an exciting opportunity to work across global teams, collaborating with system architecture, research, software, sensor, analogue, and test & reliability teams in multiple regions, helping bring innovative ICs from concept to validated silicon.
Key Responsibilities for the Head of IC Design in Fareham,
Lead the definition and development of digital requirements from product specifications.
Oversee digital architecture, design, verification, and validation of capacitive touch controller ICs and automotive MCUs.
Manage the digital engineering team, including resource planning, goal setting, performance monitoring, and budget oversight.
Mentor and coach IC development engineers, sharing design expertise across the broader engineering community.
Collaborate with internal and external IP suppliers, ensuring quality, functionality, and successful integration.
Evaluate and select EDA tools for design, test, verification, and physical implementation.
Provide technical guidance to improve product performance, cost-effectiveness, and reliability.
Ensure IC designs comply with low-power, safety, and high-reliability standards.
Requirements for the Head of IC Design in Fareham
BEng or MEng in Engineering, Electronics, or a related discipline (upper second class or equivalent).
5+ years' experience in digital or mixed-signal IC design, preferably ASICs.
1+ years' experience managing or leading a team.
Strong expertise in the full digital design process from specification to validated silicon.
Knowledge of low power design, power management, area analysis, and DfT/DfM methodologies.
Experience with IP integration, silicon debug, and failure analysis.
Excellent communication, problem-solving, and decision-making skills, with ability to work effectively across global teams.
Desirable:
Mixed-signal IC design experience.
Familiarity with JIRA and Confluence for project tracking and documentation.
Experience in the touch sensing industry or with display drivers (DDI).
Knowledge of ISO-26262 functional safety or similar high-reliability standards.
Python scripting for automation and design efficiency.
Why Join Us:
Real impact: Contribute to innovative products and directly influence IC development outcomes.
Growth and development: Access mentorship, challenging projects, and professional skill development.
Balanced culture: Supportive and enjoyable workplace with a focus on work-life balance.
Hybrid working: Flexible schedule with office presence as needed.
Health & wellbeing support: Access to mental health, wellbeing services, and confidential financial and legal advice.
Apply today to join a team shaping the next generation of touch sensing and automotive ICs.
If you are keen please send over an updated cv to nking@redlinegroup.Com or call 01582 878839 to discuss in more detail. ....Read more...
Type: Permanent Location: Fareham, England
Start: ASAP
Salary / Rate: £65000 - £87000 per annum
Posted: 2026-01-16 16:43:03
-
Are you an experienced Product Manager with a strong technical understanding of connectors? We're working with a leading UK manufacturer and supplier of high-performance connector solutions used across sectors such as aerospace, defence, industrial, and transportation.
Due to continued growth, they are looking to appoint a Product Manager - Connectors to join their expanding team.
Responsibilities of the remote Product Manager - Connectors job:
Managing product strategy, pricing, and positioning for the connector portfolio.
Conducting market analysis to identify trends, opportunities, and new applications.
Collaborating with internal teams to develop and launch new connector products.
Providing technical support and product training to the sales team and customers.
Maintaining up-to-date knowledge of industry standards and emerging technologies.
Experience required for this remote Product Manager - Connectors job:
Proven experience in product management within the connectors, interconnect, or electro-mechanical sectors.
Working knowledge of Micro-D and Nano-D connectors
Experience within the aerospace & defence industry
The ability to work independently in a remote UK-based role, while collaborating effectively with colleagues and clients.
What's on offer:
Competitive salary and performance-based bonus.
Fully remote working within the UK.
Opportunities for professional development and career progression.
The chance to play a key role in shaping a high-performance connector product range for a globally recognised engineering company.
If this remote Product Manager - Connectors job is of interest, send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878816 / 07471 181784. ....Read more...
Type: Permanent Location: England
Start: ASAP
Salary / Rate: £50000 - £60000 per annum
Posted: 2026-01-16 16:20:26
-
Commercial Electrician Middlesbrough£37,000 - £40,000 + Van + Fuel Card + Family Run + Local Patch + Limited Work Away + Christmas Closure + Work Life Balance + Additional QualificationsAs a Commercial Electrician, you will enjoy a structured work-life balance, with core hours Monday to Friday and minimal callouts, giving you the flexibility to enjoy your personal time while delivering high-quality electrical services.
This role provides the chance to work across exciting commercial and industrial projects, ensuring variety and professional satisfaction in every day.Joining this team as a Commercial Electrician also means becoming part of a supportive, people-first family run company where your skills are valued and your initiative rewarded.
You will be involved in projects ranging from small installations to larger maintenance works, offering a real sense of achievement for those committed to their craft.Your Role As a Industrial Electrician Will Include:
Deliver small to medium electrical projects (£5k-£20k), including installations, remedials, and supporting project teams.
Perform EICR remedial, fixed wire testing, emergency lighting maintenance, and general maintenance in educational and public sector buildings.
Working in North Yorkshire, occasional London site work working Mon-Fri 8-4pm
The Successful industrial Electrician Will Have:
JIB Gold Qualified Electrician
Experience working on Commercial / Industrial projects
Full UK Right to work + Valid UK Driving Licence
Commercial Electrician, Electrical Engineer, Electrical Project Engineer, Electrical maintenance engineer, Commercial Electrician, JIB Card
For Immediate consideration please call Liam on: 07458143259 ....Read more...
Type: Permanent Location: Middlesbrough, England
Salary / Rate: £37000 - £40000 per annum
Posted: 2026-01-16 16:01:42
-
Are you an experienced assembler looking for a new opportunity?
Holt Engineering is currently working with an innovative manufacturing company based in Portsmouth, which is on the lookout for a PCB Assembler.
As a PCB Assembler, you will be supporting the production team with the assembly work flow this could include, masking, PCB assembly, conformal coating, and more.
If youre looking to secure a PCB Assembler position with a steadily growing business, then this job is for you!
To be successful in these PCB Assembler roles you must:
- Have experience working within electronics
- Soldering experience
- Previous experience working with PCBs
- Have good attention to detail and be able to work to tight deadlines
- Be able to work from drawings and part lists
For the successful PCB Assembler you will:
- Get a competitive pay structure
- Free parking
- Friendly work environment.
Working full time Mondya to Friday on a Day shift.
Paying between £12.21-£13.00ph depending on experience.
Sound like a good fit? Great, then we would love to hear from you!
Contact Sam at Holt Engineering on 07485 390946 or apply now for this advert.
All calls are recorded for training and quality purposes.
Further details are shown within our Privacy Policy which is displayed on our website
In line with the requirements of the Asylum and Immigration Act 1996, all applicants must be eligible to live and work in the UK As part of the recruitment process, you will be asked to provide documented evidence of eligibility please make sure you have this updated ....Read more...
Type: Permanent Location: Portsmouth,England
Start: 16/01/2026
Duration: 1.0 HOUR
Salary / Rate: £12.21 - £13 per hour
Posted: 2026-01-16 14:42:04
-
Holt Engineering is currently working with an innovative manufacturing company based in Fareham, which is on the lookout for a Assembler.
As a Assembler, you will be supporting the production team with the assembly workflow this could include, PCB Assembly, Soldering, conformal coating, using hand tools.
If youre looking to secure a Assembler position with a steadily growing business, then this job is for you!
To be successful in these Assembler roles you must:
- Previous assembly experience
- Work from technical drawings
- Have good attention to detail and be able to work to tight deadlines
- Soldering to IPC Standard
For the successful Assembler you will:
- Get a competitive pay structure
- Early finish on Fridays
- Free parking
- Friendly work environment
The working hours are: Monday to Thursday 7.30-16.30 and early finish on the Fridays 12:30
Paying between £12.21 - £13.00 (depending on experience)
Looking to progress your career further in the electronics industry? Then apply now to the Assembler role!
Contact Sam at Holt Engineering on 07485 390946.
All calls are recorded for training and quality purposes.
Further details are shown within our Privacy Policy which is displayed on our website
In line with the requirements of the Asylum and Immigration Act 1996, all applicants must be eligible to live and work in the UK As part of the recruitment process, you will be asked to provide documented evidence of eligibility please make sure you have this updated. ....Read more...
Type: Permanent Location: Fareham,England
Start: 16/01/2026
Salary / Rate: £12.21 - £13 per hour
Posted: 2026-01-16 14:10:10
-
JOB DESCRIPTION
Location: Vernon Hills, IL Department: IT Direct Reports/Manages others: No
Senior Systems Engineer, Cloud and Compute (for our Cloud and On-Prem Engineering and Operations team) We're looking for a hands-on Senior Systems Engineer to join our high-performing Cloud and Compute engineering team at a multibillion-dollar global organization.
If you thrive in complex enterprise environments and enjoy solving technical challenges at scale, this is the role for you. This position plays a key role in architecting, implementing, and optimizing our hybrid infrastructure, including Azure Cloud, VMware, Hyper-V, Storage and Windows Server platforms.
You'll drive forward key modernization initiatives such as: Upgrading to Windows Server 2025 Migrating and building workloads in Azure as part of our cloud transformation journey Modernizing and upgrading our ESXi infrastructure And more exciting, high-impact projects across our global footprint
In this role, you'll contribute to the technical direction of application hosting, storage, virtualization, and disaster recovery.
You'll collaborate cross-functionally with teams across infrastructure, application development, networking and security to ensure scalable, secure, and high-performing solutions.
If you're passionate about infrastructure modernization, cloud adoption, and continuous improvement, and you bring deep technical expertise with a strategic mindset, we'd love to hear from you.
Responsibilities:
Design, optimize, and implement application hosting solutions in both Azure cloud and on-premise data centers that meet the demands of the business. Evaluate the current and upcoming infrastructure stack from a security perspective and provide hardening recommendations. Virtualization and Windows optimization & performance Active Directory domain consolidations Coordinates and supports information security efforts in server, virtualization and storage.
This includes working with application developers and database administrators to plan and implement application security within application environments.
Thus providing guidance on risks and vulnerabilities related to common application protocols, web services security, and end user systems. Scripting and automation of application hosting and storage maintenance Disaster and Site Recovery Take part in life cycle management/ refresh of equipment Systems management and alerting, which may include nonbusiness hours on-call support rotation as needed. Collaborate with network services, software systems engineering and/or application development to restore service and/or identify problems Assist with other facets of IT operations and projects as needed.
Qualifications:
10+ years in engineering role for application hosting for global entities with $3B+ in annual revenue. 10+ years with MS Server and Virtualization platforms (VMWare & MS Hypervisor) 10+ years with mass storage units (HP Storage, IBM storage, etc.) 10+ years with ITIL processes and industry best practices for application hosting 5+ years with Azure IaaS and PaaS experience BS or MS in Computer Science or equivalent education. Excellent oral and written communication Strong problem-solving skills, attention to detail and the ability to work both independently and as part of a team. Ability to manage and deliver multiple priorities in a timely fashion. Ability to support cross-team collaboration to ensure your focus area integrates with the overall solutions. Experience with IBM Power Systems and AS400 is a plus. MCSE, Security, ITIL, and/or Azure certifications are a plus.
Salary: $145,000 - $170,000, bonus eligible From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and one floating holiday per year.
You are also eligible to earn three weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Vernon Hills, Illinois
Posted: 2026-01-16 14:08:32
-
JOB DESCRIPTION
Location: Vernon Hills, IL Department: IT Direct Reports/Manages others: No
Senior Systems Engineer, Cloud and Compute (for our Cloud and On-Prem Engineering and Operations team) We're looking for a hands-on Senior Systems Engineer to join our high-performing Cloud and Compute engineering team at a multibillion-dollar global organization.
If you thrive in complex enterprise environments and enjoy solving technical challenges at scale, this is the role for you. This position plays a key role in architecting, implementing, and optimizing our hybrid infrastructure, including Azure Cloud, VMware, Hyper-V, Storage and Windows Server platforms.
You'll drive forward key modernization initiatives such as: Upgrading to Windows Server 2025 Migrating and building workloads in Azure as part of our cloud transformation journey Modernizing and upgrading our ESXi infrastructure And more exciting, high-impact projects across our global footprint
In this role, you'll contribute to the technical direction of application hosting, storage, virtualization, and disaster recovery.
You'll collaborate cross-functionally with teams across infrastructure, application development, networking and security to ensure scalable, secure, and high-performing solutions.
If you're passionate about infrastructure modernization, cloud adoption, and continuous improvement, and you bring deep technical expertise with a strategic mindset, we'd love to hear from you.
Responsibilities:
Design, optimize, and implement application hosting solutions in both Azure cloud and on-premise data centers that meet the demands of the business. Evaluate the current and upcoming infrastructure stack from a security perspective and provide hardening recommendations. Virtualization and Windows optimization & performance Active Directory domain consolidations Coordinates and supports information security efforts in server, virtualization and storage.
This includes working with application developers and database administrators to plan and implement application security within application environments.
Thus providing guidance on risks and vulnerabilities related to common application protocols, web services security, and end user systems. Scripting and automation of application hosting and storage maintenance Disaster and Site Recovery Take part in life cycle management/ refresh of equipment Systems management and alerting, which may include nonbusiness hours on-call support rotation as needed. Collaborate with network services, software systems engineering and/or application development to restore service and/or identify problems Assist with other facets of IT operations and projects as needed.
Qualifications:
10+ years in engineering role for application hosting for global entities with $3B+ in annual revenue. 10+ years with MS Server and Virtualization platforms (VMWare & MS Hypervisor) 10+ years with mass storage units (HP Storage, IBM storage, etc.) 10+ years with ITIL processes and industry best practices for application hosting 5+ years with Azure IaaS and PaaS experience BS or MS in Computer Science or equivalent education. Excellent oral and written communication Strong problem-solving skills, attention to detail and the ability to work both independently and as part of a team. Ability to manage and deliver multiple priorities in a timely fashion. Ability to support cross-team collaboration to ensure your focus area integrates with the overall solutions. Experience with IBM Power Systems and AS400 is a plus. MCSE, Security, ITIL, and/or Azure certifications are a plus.
Salary: $145,000 - $170,000, bonus eligible From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave.
We also offer a 401(k) plan after three months of employment.
Associates are vested in the RPM Pension plan after completing five years of service.
Rust-Oleum offers 9 paid holidays and one floating holiday per year.
You are also eligible to earn three weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer.
Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.Apply for this ad Online! ....Read more...
Type: Permanent Location: Vernon Hills, Illinois
Posted: 2026-01-16 14:08:21
-
JOB DESCRIPTION
Euclid Chemical is a fully owned subsidiary of RPM International (NYSE: RPM), one of the world's largest coatings companies.
With over 110 years of experience, we provide innovative solutions to the construction and restoration markets through our extensive range of treatments, sealants, coatings, sealers, and decorative products.
Recognized as a 2024 NE Ohio Top Workplace by Energage, Euclid Chemical prides itself on fostering a people-first culture that values collaboration, respect, and growth.
Summary: The Cement Additives Process Engineer plays a pivotal role in driving business growth and profitability through strategic technical support and contribution to the sales process.
This position is tasked with providing technical support and expertise of the cement manufacturing process to our cement additive sales team and customers.
Proficiency in this role requires exceptional cement manufacturing, analytical, and communication skills to collaborate seamlessly with internal teams at Euclid Chemical and build strong, lasting relationships with external cement customers - both active and potential customers.
This is a remote position, with Euclid Chemical's main campus located in Ceveland, OH.
Responsibilities:
Serve as a technical ambassador for the Euclid Chemical cement additive sales team. Subject matter expert to provide feedback and troubleshooting information for customers. Act as a technical expert on the latest cement manufacturing technologies, equipment, and best practices to maintain Euclid Chemical's competitive edge. Deliver customer support through industrial trials, mill audits, special projects, data analysis, and detailed reporting to retain existing customers and attract new ones Compile and analyze industrial trial process data, and prepare detailed reports providing conclusions and action items from industrial trial runs. Keep thorough and updated records of activity history with active and potential cement additive customers. Design and execution of plant industrial trials and mill audits. Maintenance and operation of portable pump equipment inventory to utilize during industrial trials. Collaborate with the Cement Additives Technical Manager and Cement Lab Manager to develop new products and enhance existing lines based on market trends, competitive analysis, and industrial trial results. Work collaboratively with Euclid Chemical Cement Additives Lab team in the development and improvement of laboratory ball mill methodologies for testing materials.
Education and Experience:
Bachelor's degree in engineering (chemical or mechanical) or chemistry - master's degree is preferred. Minimum of 5-7 years of experience in cement manufacturing process control or quality management.
Skills and Qualifications:
Advanced knowledge and understanding of cement manufacturing, cement chemistry, and raw and finish mill circuit operation. Basic understanding of cement additives chemistries. Ability to interpret lab outputs (e.g., XRD, clinker microscopy, isothermal calorimetry, and physical test results) to develop customer-specific strategies and product recommendations. Proficiency with cement standards (ASTM, CSA, etc.). Strong knowledge of milling equipment, particle classifiers, circuit configurations, and pyro processes for optimizing clinker performance. Advanced knowledge of MS Office computer software: Excel, PowerPoint, Word.
Basic knowledge of MS Outlook, Teams, Edge Internet Browser. Knowledge of industry trends, including low clinker content cement production and co-grinding with alternative materials. Data analysis and report writing skills. Communication and interpersonal skills. Leadership and team management capabilities. Analytical and problem-solving abilities. The ability to design and execute plant industrial trials and mill audits.
Travel:
Willingness to travel as needed for customer meetings and plant industrial trials (up to 50%).
Why join our team? Euclid Chemical offers an attractive package for personnel, company benefits include but are not limited to:
Medical, Dental and Vision coverage Life Insurance Short Term/Long Term Disability Parental Leave 401k with company match Defined benefit pension plan Vacation and holiday time A company vehicle or car allowance
Salary Range: $110,000 - $125,000 plus annual company bonus program
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2026-01-16 14:08:19
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB: The Construction Manager-HVAC manages all projects (including GC and Self-Perform HVAC AHU Restorations, etc.).
This will involve working with the superintendent or technicians assigned to the project to ensure delivery on time and within budget and selecting and managing all subcontractors.
Additional duties will include participating in all proposals, specifications, price estimates, schedules, and sales efforts as they affect the projects.
Also, responsibilities will include Sales and Service Support, Field Resources, and Customer Management communication as necessary.
Abide by all Company policies.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Responsible for contributing to, validating, and signing off on all proposals and specifications: Conceptual Phase (estimates & schedules) Program Planning Phase Design Phase Conduct Prebid Construction Phase Conduct Pre-con Effective Close-out Cost Estimates and schedules Use of eBuilder for all project documentation per policy manual Accountable for project cost/budget variance & profitability Accountable for Quality Assurance Understand the subcontractor agreement and corrective measures of notification to the subcontractor per the executed agreement Proper letter notification to non-compliant subcontractor agreement articles, i.e., no waivers of lien for lower tier subs, missing submittals, etc. Sets project timelines and goals Manages critical metrics and reports regularly or as required Coordinates work with Program Managers, Sales & Service Support, Customer Management (WTI and Tremco Roofing), and Resource Management Participate in the Preventive and Corrective Action process with responsibility and authority to: Initiate action to prevent the occurrence of any non-conformity relating to service, process, and quality. Identify and record any service, process, or quality system problems. Initiate, recommend, or provide solutions through designated channels. Verify the implementation of solutions. Control further processing, delivery, or installation of non-conforming products until the deficiency or unsatisfactory condition has been corrected. Review all bids received and conduct contractor interviews for specification and contractual compliance. Approve proposals for submission (i.e., pricing, specification, scope).
Direct Project Managers, technicians, and superintendents. Sign-off on project billings. Responsible for changing order negation and approval.
EDUCATION:
Bachelor's degree - Construction Related (Engineering, Construction Management, etc)
EXPERIENCE:
HVAC/Mechanical Contracting Experience mandatory
CERTIFICATES, LICENSES, REGISTRATIONS: Mechanical Contracting License or the ability to get it is a plus.
OTHER SKILLS AND ABILITIES:
Proficient in Microsoft Suite (Excel, Word, and Outlook).
Experience with Salesforce and eBuilder preferred.
Ability to direct a project from concept to closeout. Communicate effectively with internal stakeholders and the building owner. Traveling up to 50%, including overnight stays.
Apply for this ad Online! ....Read more...
Type: Permanent Location: Clearwater, Florida
Posted: 2026-01-16 14:08:19
-
JOB DESCRIPTION
GENERAL PURPOSE OF THE JOB: The Construction Manager-HVAC manages all projects (including GC and Self-Perform HVAC AHU Restorations, etc.).
This will involve working with the superintendent or technicians assigned to the project to ensure delivery on time and within budget and selecting and managing all subcontractors.
Additional duties will include participating in all proposals, specifications, price estimates, schedules, and sales efforts as they affect the projects.
Also, responsibilities will include Sales and Service Support, Field Resources, and Customer Management communication as necessary.
Abide by all Company policies.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Responsible for contributing to, validating, and signing off on all proposals and specifications: Conceptual Phase (estimates & schedules) Program Planning Phase Design Phase Conduct Prebid Construction Phase Conduct Pre-con Effective Close-out Cost Estimates and schedules Use of eBuilder for all project documentation per policy manual Accountable for project cost/budget variance & profitability Accountable for Quality Assurance Understand the subcontractor agreement and corrective measures of notification to the subcontractor per the executed agreement Proper letter notification to non-compliant subcontractor agreement articles, i.e., no waivers of lien for lower tier subs, missing submittals, etc. Sets project timelines and goals Manages critical metrics and reports regularly or as required Coordinates work with Program Managers, Sales & Service Support, Customer Management (WTI and Tremco Roofing), and Resource Management Participate in the Preventive and Corrective Action process with responsibility and authority to: Initiate action to prevent the occurrence of any non-conformity relating to service, process, and quality. Identify and record any service, process, or quality system problems. Initiate, recommend, or provide solutions through designated channels. Verify the implementation of solutions. Control further processing, delivery, or installation of non-conforming products until the deficiency or unsatisfactory condition has been corrected. Review all bids received and conduct contractor interviews for specification and contractual compliance. Approve proposals for submission (i.e., pricing, specification, scope).
Direct Project Managers, technicians, and superintendents. Sign-off on project billings. Responsible for changing order negation and approval.
EDUCATION:
Bachelor's degree - Construction Related (Engineering, Construction Management, etc)
EXPERIENCE:
HVAC/Mechanical Contracting Experience mandatory
CERTIFICATES, LICENSES, REGISTRATIONS: Mechanical Contracting License or the ability to get it is a plus.
OTHER SKILLS AND ABILITIES:
Proficient in Microsoft Suite (Excel, Word, and Outlook).
Experience with Salesforce and eBuilder preferred.
Ability to direct a project from concept to closeout. Communicate effectively with internal stakeholders and the building owner. Traveling up to 50%, including overnight stays.
Apply for this ad Online! ....Read more...
Type: Permanent Location: Clearwater, Florida
Posted: 2026-01-16 14:08:18
-
JOB DESCRIPTION
Euclid Chemical is a fully owned subsidiary of RPM International (NYSE: RPM), one of the world's largest coatings companies.
With over 110 years of experience, we provide innovative solutions to the construction and restoration markets through our extensive range of treatments, sealants, coatings, sealers, and decorative products.
Recognized as a 2024 NE Ohio Top Workplace by Energage, Euclid Chemical prides itself on fostering a people-first culture that values collaboration, respect, and growth.
Summary: The Cement Additives Process Engineer plays a pivotal role in driving business growth and profitability through strategic technical support and contribution to the sales process.
This position is tasked with providing technical support and expertise of the cement manufacturing process to our cement additive sales team and customers.
Proficiency in this role requires exceptional cement manufacturing, analytical, and communication skills to collaborate seamlessly with internal teams at Euclid Chemical and build strong, lasting relationships with external cement customers - both active and potential customers.
This is a remote position, with Euclid Chemical's main campus located in Ceveland, OH.
Responsibilities:
Serve as a technical ambassador for the Euclid Chemical cement additive sales team. Subject matter expert to provide feedback and troubleshooting information for customers. Act as a technical expert on the latest cement manufacturing technologies, equipment, and best practices to maintain Euclid Chemical's competitive edge. Deliver customer support through industrial trials, mill audits, special projects, data analysis, and detailed reporting to retain existing customers and attract new ones Compile and analyze industrial trial process data, and prepare detailed reports providing conclusions and action items from industrial trial runs. Keep thorough and updated records of activity history with active and potential cement additive customers. Design and execution of plant industrial trials and mill audits. Maintenance and operation of portable pump equipment inventory to utilize during industrial trials. Collaborate with the Cement Additives Technical Manager and Cement Lab Manager to develop new products and enhance existing lines based on market trends, competitive analysis, and industrial trial results. Work collaboratively with Euclid Chemical Cement Additives Lab team in the development and improvement of laboratory ball mill methodologies for testing materials.
Education and Experience:
Bachelor's degree in engineering (chemical or mechanical) or chemistry - master's degree is preferred. Minimum of 5-7 years of experience in cement manufacturing process control or quality management.
Skills and Qualifications:
Advanced knowledge and understanding of cement manufacturing, cement chemistry, and raw and finish mill circuit operation. Basic understanding of cement additives chemistries. Ability to interpret lab outputs (e.g., XRD, clinker microscopy, isothermal calorimetry, and physical test results) to develop customer-specific strategies and product recommendations. Proficiency with cement standards (ASTM, CSA, etc.). Strong knowledge of milling equipment, particle classifiers, circuit configurations, and pyro processes for optimizing clinker performance. Advanced knowledge of MS Office computer software: Excel, PowerPoint, Word.
Basic knowledge of MS Outlook, Teams, Edge Internet Browser. Knowledge of industry trends, including low clinker content cement production and co-grinding with alternative materials. Data analysis and report writing skills. Communication and interpersonal skills. Leadership and team management capabilities. Analytical and problem-solving abilities. The ability to design and execute plant industrial trials and mill audits.
Travel:
Willingness to travel as needed for customer meetings and plant industrial trials (up to 50%).
Why join our team? Euclid Chemical offers an attractive package for personnel, company benefits include but are not limited to:
Medical, Dental and Vision coverage Life Insurance Short Term/Long Term Disability Parental Leave 401k with company match Defined benefit pension plan Vacation and holiday time A company vehicle or car allowance
Salary Range: $110,000 - $125,000 plus annual company bonus program
Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, protected veteran status or disability.Apply for this ad Online! ....Read more...
Type: Permanent Location: Cleveland, Ohio
Posted: 2026-01-16 14:07:59
-
Are you an experienced Principal Firmware Engineer ready to take ownership of firmware strategy and delivery for cutting-edge laser and photonics systems? This is a senior, high-impact role where you'll lead firmware development for advanced embedded platforms supporting industries such as medical devices, life sciences, semiconductors, space, and quantum technologies.
This opportunity offers the chance to shape global firmware standards, drive innovation, and mentor teams while delivering robust, high-quality embedded solutions that meet customer and business objectives.
Key responsibilities of the Principal Firmware Engineer job based in Southampton:
Lead the research, development, testing, and maintenance of firmware for new and existing laser systems.
Drive the creation of firmware concepts, roadmaps, and strategic plans aligned with organisational goals.
Design, develop, test, and debug embedded firmware using C/C++ for complex hardware platforms.
Develop algorithms for measurement data processing and create interface and communication protocol code.
Implement and maintain build systems, automated testing, and continuous integration pipelines.
Ensure firmware meets design, quality, reliability, and cost-effectiveness standards.
Manage projects from concept and design through unit testing and handover to production.
Conduct code reviews and ensure documentation captures designs, tests, policies, and procedures.
Establish and maintain global best practice procedures across engineering teams and sites.
Act as a key subject matter expert and advisor to internal stakeholders.
Track deliverables, set priorities, and provide regular progress reports to senior leadership.
Drive continuous improvement across processes, products, and services within the firmware function.
Skills & knowledge required of the Principal Firmware Engineer job based in Southampton:
Expert-level proficiency in C/C++ and embedded firmware development.
Strong understanding of communication protocols networked and industrial interfaces.
Experience with automated testing, CI/CD pipelines, and build systems.
Knowledge of scripting languages and test automation frameworks.
Strong project management, time management, and organisational skills.
Ability to work collaboratively across engineering, R&D, product, and project teams.
Strong communication skills and the ability to operate effectively in a fast-changing, high-growth environment.
Innovative mindset with a strong customer and quality focus.
Degree in Computer Engineering, Electrical Engineering, or a related discipline.
Proven experience setting up and leading a firmware function.
Strong background in system design, planning, and delivering complex engineering projects.
Experience in the photonics industry and within fast-paced, growing environments.
If this Principal Firmware Engineer job based in Southampton could be of interest, send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878816 to discuss in more detail.
....Read more...
Type: Permanent Location: Southampton, England
Start: ASAP
Salary / Rate: £75000 - £85000 per annum
Posted: 2026-01-16 14:07:11
-
Are you an experienced Electrical Installation Technician - Midlands with a background in vehicle electrical systems and onboard technology? This is an exciting mobile opportunity to work on a wide range of vehicles, delivering advanced onboard systems for fleet and public transport applications across the UK.
This role offers variety, autonomy, and strong career progression potential within a growing organisation that supports innovation, development, and long-term career growth.
You'll be installing, commissioning, and validating complex onboard systems across buses, cars, and trucks, working both independently and as part of a wider project team.
Key responsibilities of the Electrical Installation Technician - Midlands job:
Install and commission onboard systems, including CCTV, passenger counting, onboard media, telematics, and communications routers.
Commission new systems for customer handover, including linking installations to the central portal, using both laptop-based diagnostics and hands-on fault rectification.
Carry out installations personally and verify/commission systems installed by factories or third-party providers.
Support Project Engineers on new installations and projects to ensure best practice and successful delivery.
Accurately report daily progress and key information using worksheets and email updates.
Communicate effectively with internal teams and customer site staff to ensure smooth project delivery.
Manage issued stock responsibly and ensure unused stock is returned in line with company processes.
Maintain a safe, clean, and professional working environment at all customer sites.
Take responsibility for company vehicle care and professional presentation while representing the business.
Skills & experience required for the Electrical Installation Technician - Midlands job:
Proven experience working with motor vehicle electrical systems across cars, buses, or trucks.
Qualifications in electrical, auto-electrical, or EV awareness (advantageous but not essential).
Excellent communication skills, both internally and in customer-facing environments.
Ability to work independently and collaboratively as part of a team.
Full UK driving licence and a valid passport.
Experience working to health and safety standards.
Willingness to undertake a basic DBS check as part of the role.
Package & benefits for the Electrical Installation Technician - Midlands job:
Company vehicle(van)
Company laptop and mobile phone
Ongoing training and development
Pension scheme
25 days' holiday
If this Electrical Installation Technician - Midlands job could be of interest, send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878816 for more details. ....Read more...
Type: Permanent Location: West Midlands, England
Start: ASAP
Salary / Rate: £32000 - £35000 per annum
Posted: 2026-01-16 13:55:21
-
Are you an experienced Electrical Installation Technician - South with a background in vehicle electrical systems and onboard technology? This is an exciting mobile opportunity to work on a wide range of vehicles, delivering advanced onboard systems for fleet and public transport applications across the UK.
This role offers variety, autonomy, and strong career progression potential within a growing organisation that supports innovation, development, and long-term career growth.
You'll be installing, commissioning, and validating complex onboard systems across buses, cars, and trucks, working both independently and as part of a wider project team.
Key responsibilities of the Electrical Installation Technician - South job:
Install and commission onboard systems, including CCTV, passenger counting, onboard media, telematics, and communications routers.
Commission new systems for customer handover, including linking installations to the central portal, using both laptop-based diagnostics and hands-on fault rectification.
Carry out installations personally and verify/commission systems installed by factories or third-party providers.
Support Project Engineers on new installations and projects to ensure best practice and successful delivery.
Accurately report daily progress and key information using worksheets and email updates.
Communicate effectively with internal teams and customer site staff to ensure smooth project delivery.
Manage issued stock responsibly and ensure unused stock is returned in line with company processes.
Maintain a safe, clean, and professional working environment at all customer sites.
Take responsibility for company vehicle care and professional presentation while representing the business.
Skills & experience required for the Electrical Installation Technician - South job:
Proven experience working with motor vehicle electrical systems across cars, buses, or trucks.
Qualifications in electrical, auto-electrical, or EV awareness (advantageous but not essential).
Excellent communication skills, both internally and in customer-facing environments.
Ability to work independently and collaboratively as part of a team.
Full UK driving licence and a valid passport.
Experience working to health and safety standards.
Willingness to undertake a basic DBS check as part of the role.
Package & benefits for the Electrical Installation Technician - South job:
Company vehicle (van)
Company laptop and mobile phone
Ongoing training and development
Pension scheme
25 days' holiday
If this Electrical Installation Technician - South job could be of interest, send your CV to bwiles@redlinegroup.Com or call Ben on 01582 878816 for more details. ....Read more...
Type: Permanent Location: Norfolk, England
Start: ASAP
Salary / Rate: £32000 - £35000 per annum
Posted: 2026-01-16 13:52:55
-
Coded Welder Aluminium TIG
Location: Farnborough
Salary: Negotiable dependent on experience
The opportunity
Looking for an experienced Coded Welder with strong aluminium TIG skills to join the fabrication team.
This is a handsâon role working on highâquality, smallâbatch and prototype work, producing parts that go into critical defence and industrial systems.
You will be responsible for welding aluminium fabrications to exacting standards, following approved weld procedures and maintaining the quality and traceability expected in a regulated engineering environment.
Key responsibilities
- Perform highâquality TIG welding on aluminium components and fabrications in accordance with approved weld procedures and drawings.
- Work to BS EN ISO standards for both fillet and butt welds on 3.0 mm and 6.0 mm 5251 aluminium using 5000 series filler material.
- Set up, operate and maintain TIG welding equipment, ensuring correct parameters and consumables are used.
- Interpret engineering drawings, weld symbols and work instructions accurately.
- Carry out selfâinspection and contribute to formal inspection activities to ensure weld quality and dimensional accuracy.
- Maintain weld documentation, traceability and records to support compliance and quality audits.
- Work collaboratively with fabricators, inspectors and engineers to resolve issues and continuously improve quality and productivity.
Essential qualifications and experience
Candidates must have had or currently hold current weld procedures and welder qualifications as follows:
Weld procedures (BS EN ISO 15614â2:2005):
- Fillet weld in 3.0 mm 5251 aluminium using a 5000 series filler material TIG.
- Fillet weld in 6.0 mm 5251 aluminium using a 5000 series filler material TIG.
- Butt weld in 3.0 mm 5251 aluminium using a 5000 series filler material TIG.
Welder qualifications (BS EN ISO 9606â2:2004):
- Butt weld qualification covering down to 3.0 mm thickness.
- Fillet weld qualification covering down to 3.0 mm thickness.
- Fillet weld qualification covering up to 6.0 mm thickness.
To find out more please contact Max Sinclair max@holtengineering.co.uk ....Read more...
Type: Permanent Location: Farnborough,England
Start: 16/01/2026
Salary / Rate: £16 - £20 per hour
Posted: 2026-01-16 13:04:03
-
Join a high-growth, innovation-led team in Poole that has recently invested over £1 million in new infrastructure.
If youre an experienced Electrical Technician who thrives on building, wiring, and testing complex machinery to a high standard, this is a superb next step.
The successful Electrical Technician will work within a modern manufacturing environment, collaborating with mechanical, test, and quality teams to deliver right-first-time builds.
Key responsibilities of the Electrical Technician:
- Assemble and wire electrical systems from detailed electrical drawings and circuit diagrams.
- Install and integrate electrical panels into complex machinery.
- Perform electrical tests and safety checks; maintain accurate build/test records.
- Contribute to continuous improvementidentify issues, propose fixes, and help standardise best practice.
What were looking for:
- Time-served apprenticeship or equivalent experience in electrical assembly.
- 2+ years hands-on experience of panel board population and electro-mechanical wiring.
- Confident reading/interpreting electrical schematics and wiring diagrams.
- Experience of functional testing and fault-finding.
- IPC certifications (desirable).
What youll bring:
- Familiarity with a range of voltage systems and safe isolation.
- Meticulous, methodical approach with strong attention to detail and documentation.
- Flexible mindset, team player, and eagerness to learn new skills.
Whats on offer:
- Competitive salary (DOE) with annual pay reviews.
- 25 days holiday + bank holidays and a Christmas shutdown.
- Enhanced pension scheme.
- Cycle-to-work scheme & eyecare vouchers.
- Refer-a-friend rewards.
- Ongoing training and professional development.
Why apply to this Electrical Technician opportunity:
Youll be joining a supportive, forward-thinking business with real investment in people, processes, and equipmentgiving you the platform to grow your capability and your career.
How to Apply - To learn more about this Electrical Technician opportunity or apply immediately, contact:
Kate Taylor Kate@holtengineering.co.uk ....Read more...
Type: Permanent Location: Poole,England
Start: 16/01/2026
Salary / Rate: £28000 - £31500 per annum
Posted: 2026-01-16 12:28:04
-
We are proud to be partnering with Rivencore Global Solutions, a world-renowned leader in maritime engineering and technology in the defence sector, to recruit top talent for their growing team.
This is a fantastic opportunity to join an innovative and globally respected brand that delivers cutting-edge solutions across the maritime sector.
This exclusive partnership means we are your direct gateway to the best career opportunities within their organisation.
I am seeking skilled and motivated Electronic Test Technicians and Survey Repair Engineers.
These roles involves testing, inspecting, diagnosing, and repairing products to ensure functionality and quality standards.
You will contribute to maintaining high performance across manufacturing and engineering processes while adhering to company health and safety policies.
Key Responsibilities for an Electronic Test Technician and Electronic Repair Technician:
- Perform testing and inspection of manufactured and purchased products using relevant specifications and equipment.
- Diagnose faults and repair units, including wiring, card changes, and component-level replacements and PCB Repairs.
- Conduct surveys to assess product conditions and identify issues.
- Write detailed reports on test results, failures, and defective components.
- Provide support for prototype equipment, offering specialist advice on testing requirements.
- Maintain and improve test equipment and manufacturing processes.
- Work collaboratively to ensure deadlines and customer requirements are met.
- Follow health and safety guidelines and contribute to continuous improvement efforts.
Qualifications and Skills for an Electronic Test Technician and Electronic Repair Technician:
Essential:
- Level 3 qualification in Electrical and Electronics or equivalent experience.
- Strong understanding of electrical/electronic test practices.
- Ability to read circuit diagrams and fault-find to component level.
- Knowledge of electrical/electronic test equipment (such as Oscilloscopes, signal Generators and spectrum Analysers) and ESD procedures.
- Proficient in Microsoft Word, Excel, and programming.
Desirable:
- Experience in IPC 620 and 610 standards for repair.
- Effective communication skills, both written and verbal.
- Confident problem solver with the ability to meet tight deadlines.
- Self-motivated, team player, with a "can-do" attitude.
What Rivencore Global Solutions Offer
- Competitive salary based on experience.
- 25 days holiday plus bank holidays.
Option to buy or sell holiday
- Enhanced pension scheme.
- Cycle-to-work scheme.
- Christmas shutdown.
- Eyecare vouchers.
- Help at Hand Employee Support Programme including online GP appointments
- Refer-a-friend rewards scheme.
- Opportunities for professional growth and training
- Free refreshments on site
- Free car parking
Based in the heart of Poole Dorset you are only minutes away from 7 miles of award winning blue flag beaches, beautiful forests and great transport links to the South East and South West.
This really is a great place to live and work.
Relocation support will be considered for this role.
Holt Engineering is managing all hiring for these exciting roles.
If you are an agency and wish to partner with us on these opportunities, please reach out to discuss how to Join The Process.
As the role is for a defence sector business you will need to have lived in the UK for 5 years and be able to get clearance or be a UK national.
If you have the required skills and experience for this role, we would love to hear from you.
Apply now or contact Kate at Holt Engineering on 07441916022 or kate@holtengineering.co.uk for more information. ....Read more...
Type: Permanent Location: Poole,England
Start: 16/01/2026
Salary / Rate: £28000 - £32000 per annum
Posted: 2026-01-16 12:27:07
-
CNC Programmer Poole, Dorset
Salary: £35,000£45,000
Take on a role where your programming skills genuinely influence the quality of every finished component.
This CNC Programmer position offers the chance to work on complex, large-scale parts while contributing to a team that thrives on precision, collaboration, and steady progression.
The CNC Programmer will join an established engineering group in Poole, supporting projects from initial programming stages through to final manufacture.
Youll be part of a modern, well-equipped environment where problem-solving and accuracy are central to every job.
Its an excellent opportunity for a CNC Programmer who enjoys technical challenge, hands-on involvement, and varied project work.
As a CNC Programmer, you will:
- Write and edit CNC programs using CAD/CAM software (Alphacam or similar)
- Produce work instructions, drawings, and cut/pack guides
- Design jigs, fixtures, tooling, and shop aids
- Work alongside CNC operators to verify and refine programs
- Support estimating and costing for incoming projects
- Liaise with customers and suppliers, including occasional site visits
- Identify and implement machining and workflow improvements
- Uphold Health & Safety, quality, and environmental standards
Essential skills for the CNC Programmer:
- 2+ years experience programming 3-axis CNC machinery (5-axis desirable)
- Experience with Alphacam, Hexagon, or similar CAM packages
- Confident in 2D and 3D CAD
- Understanding of machining foam, wood, and textile materials
- Strong problem-solving ability and proactive approach
- Clear communicator who works well within a team
Benefits for the CNC Programmer:
- Competitive salary
- Work with advanced materials and modern CNC machinery
- Long-term development within a growing, stable business
- Supportive team environment that values initiative
If youre an experienced CNC Programmer who wants to be part of a business that values precision, people, and progress, get in touch.
Call Rio at Holt Engineering on 07483025038. ....Read more...
Type: Permanent Location: Poole,England
Start: 16/01/2026
Salary / Rate: £35000 - £45000 per annum
Posted: 2026-01-16 12:01:05
-
Quality Inspector
Weymouth
Quality Inspector Salary £15-17 per hour
Permanent Role
The Company
Join a leading precision engineering company with decades of experience in the aerospace and defence industries.
Specializing in the design, manufacture, and supply of high-quality components, this company produces critical parts for jet engines, aircraft structures, and weapons systems.
Committed to the highest quality standards, they are now seeking a skilled and detail-oriented Quality Inspector to join their team.
Quality Inspector Key Responsibilities
Perform First Offs, In-Process, Goods Inwards, and Final Inspections
Use hand tools for manual inspection and operate an in-house MRP system to document findings
Prepare and carry out FAIRs (First Article Inspection Reports)
Ensure compliance with Quality Assurance systems and support continuous improvement initiatives
Maintain a safe and organized workplace
Quality Inspector Skills & Experience
Experience in FAIR creation and completion to AS9102 standards
Strong ability to read and interpret engineering drawings
Good understanding of GD&T (Geometric Dimensioning & Tolerancing)
Background in Inspection and/or Surface Treatments
Why Apply for the Quality Inspector Role?
Work for a leading Aerospace & Defence precision engineering company
Competitive £15-£17 per hour salary
Join a highly skilled Quality team in a thriving industry
How to Apply for the Quality Inspector Position
Apply for the Quality Inspector role now or contact Rio at rio@holtengineering.co.uk for more information 07483025038. ....Read more...
Type: Permanent Location: Weymouth,England
Start: 16/01/2026
Salary / Rate: £15 - £17 per hour
Posted: 2026-01-16 11:56:12
-
Commercial Gas Engineer Midlands £35,000-£48,000 (OTE £55,000) + Company Car or Van + Paid Travel + Full Training + Small Regional Patch + Limited Call out 4x a Year
Are you looking to develop your skills and take the next step in your career? You will gain full training in servicing and maintaining commercial heating systems across schools, hospitals, medical centres, colleges, sports stadiums, and office blocks.
This role is suitable for experienced commercial gas engineers as well as domestic gas engineers who are eager to learn and progress into commercial work.You will join a company that values stability, quality, and its people, with many staff staying long-term.
The role as Commercial Gas Engineer offers an environment that encourages teamwork, provides mentoring, and supports career development, including commercial certification and ACS qualification for those coming from a domestic background.
The company is focused on the Midlands, so travel is regional, limited and manageable.Your role as Commercial Gas Engineer will include:
Servicing and maintaining commercial gas and heating systems
Reactive and planned maintenance across the Midlands region (north to Stafford, south to Hereford)
Working alongside senior engineers for on-the-job training and skill development
Opportunity to progress and gain ACS commercial certification for domestic engineers
The successful Commercial Gas Engineer will need:
Commercial Gas qualification preferred; domestic gas engineers will be considered if willing to train
Full UK driving licence
Strong mechanical aptitude, hands-on problem-solving skills, and willingness to learn
Keywords / Titles: Commercial Gas Engineer, Commercial Heating Engineer, Service Engineer, Boiler Service Engineer, Field Service Engineer, Maintenance Engineer, Heating Systems Engineer, Industrial Gas Engineer, Gas Safe Engineer, Service & Maintenance Engineer, Commercial Heating Technician, Boiler Maintenance Engineer ....Read more...
Type: Permanent Location: Birmingham, England
Salary / Rate: £35000.00 - £48000.00 per annum
Posted: 2026-01-16 11:31:27
